[expert] 8.2 how to make supermount work?
Hello I was crasy enough to try to upgrade from rc1 to 8.2 (I said crasy because all other attempts ended up in a full install). Fortunately everything worked except for supermount. It is not working anymore. How can I fix that manually? Many thanks Ed Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Supermount
Hi Dianne "supermount -i -f=/etc/fstab enable" did the trick. Thank you ever so much. Regards Ed On Tuesday 26 March 2002 08:11 am, you wrote: > hi > > i havent installed 8.2 yet. but i did have problems > with supermount before and can share my experiences > with it...1) maybe you can check if the new version of > initscripts was actually updated during your upgrade. > that rpm is where supermount command is bundled with. > 2) you can also do a 'supermount enable' to check if > its just not enabled. > > also, note that supermount must be supported on the > kernel level to make it work. this feature is only > available on mandrake kernels. you cant compile your > own kernel from kernel.org and expect supermount to > work. its not supported on the vanilla kernels. > > btw, not all the mandrake-UPDATE kernels support it. i > noticed that kernels that came with the release > support it but not on all the kernel-updates. > **emphasize on the update** ... > > hth > dianne Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Has anynone tried CrossOver Office?
Hello Has anyone tried CrossOver office on 8.2? I wonder whether it really works. Many thanks Ed Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Irregular Mouse in 8.2
Hi I have the same problem. I have also complained about that when installing 8.0 on my PC. ctrl+alt+any other console is part of my daily routine! Things can get worse when using two mice. I am running win4lin on display 2 with a ps2 mouse and KDE on display 1 with a serial mouse. Winlin2-ps2 mouse kills serial mouse on KDE. The only way to get the serial mouse working is to shutdown win4lin. Ed - Original Message - From: "Lorne Shantz" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, March 28, 2002 7:49 PM Subject: Re: [expert] Irregular Mouse in 8.2 > This is a bug. It has been in Mandrake since way back in the 7x versions. I've > mentioned it several times only to receive deafening silence in return. Since it > never gets fixed, I can only assume they think I'm nuts, or an isolated case, or > they aren't sure what is wrong. Where I see it happening is when I use a KVM and > switch from one machine to my linux box. > > George Abdo wrote: > > > Hello All, > > > > I've installed 8.2 with X11 4.2 (non-accelerated) and now whenever I logon using > > gdm or xdm, the mouse stops working. To make the mouse work, I have to switch > > console (ctrl+alt+nay other console) and then back to the X cosole, and the > > mouse works fine. > > I am using a stock standard ps2 wheel mouse. > > > > Any ideas? > > > > Thanks > > George > > > > > Want to buy your Pack or Services from MandrakeSoft? > > Go to http://www.mandrakestore.com > > -- > > Lorne Shantz > > > > > > Want to buy your Pack or Services from MandrakeSoft? > Go to http://www.mandrakestore.com > Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] RV: irda shutting down failure
Hi Same problem here with a Sony VAIO. Please let know if there is a solution to the problem. Many thanks Ed - Original Message - From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, April 03, 2002 4:26 PM Subject: [expert] RV: irda shutting down failure > In my laptop (Toshiba Satellite 4090XCDT) if I have the irda service > activated it start OK, but shuting down ever give me a [Faiulure]. > I have tried to conect my palm to the laptop using the fire port but > without succes even using the specific configuration of Guenther Wieser > (www.creative-it.com/linux/irda/toshiba_irda_howto.php). > > If I go to Mandrake Control Center I can activate irda but if I try to > desactivate also I have the failure message. > > If it is activated all the modules can be insmod without problems > (irda, > irlan, ircomm, ircomm-tty, toshoboe), but no palm conection :-(. > > My question iare: > 1) Are there any methods to test if the irda is runing? > > 2) What could be the reason of the problem when shutting down? > > Thanks so much in advance for your comments. > > Francisco Alcaraz > Murcia (Spain) > > > > Want to buy your Pack or Services from MandrakeSoft? > Go to http://www.mandrakestore.com > Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Seagate Tapestor 20Gb - howto?
Hello Sorry for the newbie question, but I wonder whether someone could tell me how to use Seagte Tapestor 20GB - Scsi. The drive is working fine; I run the diag tools from seagate on linux and the test was ok. I have no idea of: a) mount the tape and save files to it. Does it make sense? b) Any backup software tha works with ti? Many many thanks Ed Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Some advices on saving battery on a LAPTOP
Hello I have 8.2 running on my Sony vaio notebook but the battery only runs for 25 minutes (it runs for more than one hour with XP). Could someone advise me on how to set up the configuration so as to save energy as much as possible? Many thanks Ed Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Some advices on saving battery on a LAPTOP
Hello Many thanks for the replies. Ed Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] OT - how can I set Mozilla to call acroread when GetPDFServlet shows up?
Hello I need to download some pdf files from journal sites but mozilla doesn't understand GetPDFServlet. Any/all help would be most appreciated. Ed Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Back up hfs remotely
Hello I need to back up my entire iBook and wonder whether I could do that using linux. The iBook takes an internal ip address at my private network. Is there a way to copy all mac files to a dir in the linux server? Many thanks Ed Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] netatalk anyone?
Hello I wonder whether someone out there could give some help with netatalk. I have no idea how to setup it an use it. I just need to copy some files from a IBook to my linux bok. After that I will say bye to Mac 9.1 and welcome to Mandrake 9.1 ppc. Many thanks Eduardo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] netatalk anyone?
Hello Many thanks Ed On Saturday 27 September 2003 02:56 pm, [EMAIL PROTECTED] wrote: > http://www.anders.com/projects/netatalk/impatient.html > > I used to run this, but I haven't had the imac up and running for > quite some time. It was really straight forward though. > Just as another suggestion, why not just ftp the files you need? > > mike > > > Hello > > > > I wonder whether someone out there could give some help with > > netatalk. I have > > no idea how to setup it an use it. I just need to copy some files > > from a > > IBook to my linux bok. After that I will say bye to Mac 9.1 and > > welcome to > > Mandrake 9.1 ppc. > > > > Many thanks > > > > Eduardo > > > > > > Want to buy your Pack or Services from MandrakeSoft? > > Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] mounting hfs remotely (afpfs won't compile)
Hello On searching the web I came across afpfs that allows me to mount hfs volumes. Unfortunately afpfs is too old and cannot be compiled at 9.2rc1. Does someone out there has a solution on how to mount hfs volumes remotely? Many thanks Eduardo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] mounting hfs remotely (afpfs won't compile)
Hi ya I am running netatalk but I haven't seen anything that allows to mount hfs volumes on a linux box. However I had no problem to mount the linux volume on the ibook. Many thanks Ed On Friday 03 October 2003 12:49 am, Alexandre Jacarandá wrote: > Hi Eduardo!!! > Do you try to see on netatalk project ? > I used to mount hfs volumes from iMacs with thats programs on netatalk. > > - Original Message ----- > From: "Eduardo M. A. M. Mendes" <[EMAIL PROTECTED]> > Date: Tue, 30 Sep 2003 04:41:32 -0300 > To: Mandrake Expert list <[EMAIL PROTECTED]> > Subject: [expert] mounting hfs remotely (afpfs won't compile) > > > Hello > > > > On searching the web I came across afpfs that allows me to mount hfs > > volumes. Unfortunately afpfs is too old and cannot be compiled at 9.2rc1. > > Does someone out there has a solution on how to mount hfs volumes > > remotely? > > > > Many thanks > > > > Eduardo > > --- > Alexandre Gonçalves Jacarandá > Consultor de Tecnologia de Informação > Tel.: 0 ** 21 8131-2313 > > Alguns caminham pelo arco, > eu caminho pela reta. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] mounting hfs remotely (afpfs won't compile)
Hello Many thanks. I will give a go on hfsplus. Eduardo On Thursday 02 October 2003 10:27 am, John Haywood wrote: > On Thu, 2 Oct 2003 12:02 pm, John Haywood wrote: > > On Tue, 30 Sep 2003 05:41 pm, Eduardo M. A. M. Mendes wrote: > > > Hello > > > > > > On searching the web I came across afpfs that allows me to mount hfs > > > volumes. Unfortunately afpfs is too old and cannot be compiled at > > > 9.2rc1. Does someone out there has a solution on how to mount hfs > > > volumes remotely? > > > > > > Many thanks > > > > > > Eduardo > > > > Eduardo, if you search in the ´Mandrake 9.x´ and ´Mandrake other´ areas > > on pbone: > > > > http://rpm.pbone.net/ > > > > there will be a couple of 2.4.22 kernels in contrib and cooker which have > > the hfsplus module built in. Thereafter, you should be able to specify a > > filesystem type in a regular mount command. > > > > Alternately, there are packages/source at ftp.penguinppc.org/users/hasi, > > called hfsplusutils, which support read-only access, and looks pretty > > promising (that said, I´d be reading the doco to check before entrusting > > critical data ) > > (replying to own post here -- first signs of geek-senility...) > > OK, I´ve installed hfsplusutils-1.0.4-4.i386.rpm (src.rpm wouldn´t rebuild > on my system, didn´t want to muck around), and > > ...it works!! > > took a Mac OSX-partitioned firewire drive, plugged it in to Linux i386 box, > checked dmesg to find device (/dev/sda), and > > [EMAIL PROTECTED] john]$ hpmount -r -p3 /dev/sda (read-only, partition 3) > > then > > [EMAIL PROTECTED] john]$ hpls > > Apps > ATOG Macintosh HD_asr.dmg > Backup_bootie.sparseimage > BBEdit User Manual (HTML) > BBEditUserManual_HTML.sit.bin > Build additions > Carbon Copy Cloner > Citrix ICA Client > client_50540.sit > > etc... > > [EMAIL PROTECTED] john]$ hpcopy -r Picture\ 1.pdf /home/john/ (raw data copy) > > gives a readable pdf > > Finally [EMAIL PROTECTED] john]$ hpumount > > Now, I guess I´d like it to mount somewhere tangible, rather than virtual, > but all in all, I´m impressed. It mounted the first partition (which is > MacOSX Server), the second (MacOSX Client), and the third (MacOSX data > drive) flawlessly. Even if the documentation is a bit nonexistent, it´s > certainly quicker than ftp... Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] How to install 9.1 ppc on an Ibook
Hello I am trying to install 9.1 ppc on my ibook but I'm surely missing something. I don't have Mac 9.1 cds with me so I am not sure what to do. the Ibook doesn't seem to boot directly from the Mandrake CD, does it? Can I wipe out Mac for good? Any help will be most appreciated. Many thanks Eduardo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Getting rid of ¨Remember last session¨
Hello This is probably a silly question but here it is ... I want to turn off the option that makes KDE to remember what I did on the previous session. Actually KDE doesn't remember exactly what I did, it always opens some konqueror windows, a root command (asking for password) and three terminal sessions. I want to get rid of them. Many thanks Eduardo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] How to make adsl-start available for users?
Hello I can only adsl-start by logging as root. How can I make adsl-start available for all users? I tried sudousers but no avail (It is more than likely that I did something wrong but I don't know what). Many thanks Ed Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] How to make adsl-start available for users?
Hello Many thanks. I did as you have suggested but everytime I issue the command sudo /usr/sbin/adsl-start, a password is requested. Thanks Eduardo On Sunday 05 October 2003 08:28 pm, Rolf Pedersen wrote: > Eduardo M. A. M. Mendes wrote: > > Hello > > > > I can only adsl-start by logging as root. How can I make adsl-start > > available for all users? I tried sudousers but no avail (It is more than > > likely that I did something wrong but I don't know what). > > > > Many thanks > > > > Ed > > As root in a terminal, call visudo. This is the vi editor operating on > /etc/sudoers. Press 'I' to insert some text and, since I have done this > for me, and not wanting to give a password when I call adsl-start, you > might want to insert something like the following if you want that: > > rolfALL=NOPASSWD: /usr/sbin/adsl-start, /usr/sbin/adsl-stop, > /usr/bin/rdate > > and so forth. I put it right under root's line. To save, press > 'Escape' and type :wq The command to execute is sudo > /usr/sbin/adsl-start, for example. I create an icon on the desktop with > that as the command to execute. > > Rolf Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] (Solved) e2fsck -b 8193 won't help!
Hello Just to say that I fixed the problems of resizing ext3 partitions with Partition Magic 8. Linux asks for e2fsck -b 8193 but the correct command for 4k filesystem is e2fsck -b 32768 in case someone else runs into trouble. Many thanks Ed Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] How to check if the swap is on?
Hello Although I can't remember the message on the beginning of boot process, I know that it says something about swap not being turned on. Later in the boot process, swap seems to be turned on but I want to be 100%. How can I check if swap is on? How can I check how much of swap linux is using and how much is left? Many thanks Ed Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] How to check if the swap is on?
On Sunday 19 October 2003 11:04 pm, James Sparenberg wrote: > Ed, > Probably a number of ways to do this but two quick ones. > At a command line run "top" (without the quotes) you'll see your swap > usage there. > > Second way as root run "cat /proc/meminfo" (no quotes) and you will > see the swap info there. > > james Hi James Many thanks! Ed > > > __ > > Want to buy your Pack or Services from MandrakeSoft? > > Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] X server is gone - font "fixed" not found
Celso González wrote: > > El Sábado 18 Noviembre 2000 23:13, escribiste: > > Try to see if xfs is running No, it wasn't. > if not then in a konsole type xfs -port -1 -daemon It works now. Please do tell me what happened. How come xfs has just stopped being automatically loaded during boot time? Do I have to type xfs -port -1 -daemon everytime I boot the computer? Thanks a lot. Cheers Eduardo > > See you > Celso González > [EMAIL PROTECTED] > > > > Hello > > Could you someone help me to get X-server back? The error messages > > I've got are: > > > > 1) Failure for servers telnet 974581593 localhost (I had to install 7.2 > > a couple of > > times just because of this message) > > > > 2) Could not open default font 'fixed' > > > > Please help me out; I can't stand installing 7.2 one more time. My 7.02 > > is running > > since January without a problem; 7.2, on the other hand, is a nightmare. > > > > > > Thanks a lot. > > > > Eduardo > > > Content-Type: text/plain; charset="us-ascii"; name="message.footer" > Content-Transfer-Encoding: 8bit > Content-Description: > > > > Keep in touch with http://mandrakeforum.com: > Subscribe the "[EMAIL PROTECTED]" mailing list. Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.
Re: [expert] X server is gone - font "fixed" not found
Tzafrir Cohen wrote: > > On Sun, 19 Nov 2000, John Murphy wrote: > > > On Sunday 19 November 2000 06:12, you wrote: > > > > > > Celso González wrote: > > > > El Sábado 18 Noviembre 2000 23:13, escribiste: > > > > > > > > Try to see if xfs is running > > > > > > No, it wasn't. > > > > > > > if not then in a konsole type xfs -port -1 -daemon > > > > > > It works now.Please do tell me what happened. How come xfs has just > > > stopped being automatically loaded during boot time?Do I have to type > > > xfs -port -1 -daemon everytime I boot the computer? > > /etc/rc.d/init.d/xfs start > > (you don't need to remember the parameters of every servicein the system) > > > Go into DrakeConfig, click on Startup Services. Then look down the list > > for xfs service. > > chkconfig xfs reset > > or: > > chkconfig xfs on > > (takes shorter to run) > > BTW: did it really help? > If the problem reoccurs, then there are probably some fonts that the fonts > server can't handle gracefully. Thanks a lot. The server is back on again. There is one thing I can't understand though: what happened in the first place? It worked ok untilt yesterday. Many many thanks Regards Eduardo > > -- > Tzafrir Cohen > mailto:[EMAIL PROTECTED] > http://www.technion.ac.il/~tzafrir > > > Keep in touch with http://mandrakeforum.com: > Subscribe the "[EMAIL PROTECTED]" mailing list. Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.
[expert] Netscape 6 - installation problem
Hello I am trying to run Netscape 6. I can't afford to download via modem so I downloaded sea.ta.gz from the ftp site on a server . I untared it and gunziped it and run installer but it keeps asking for lots of things and creates email accounts that I don't want to. How can I installed and run it without all ad stuff. To run netscape, which command should I issue? Many thanks Eduardo Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.
[expert] Setting up a remote printer - please help!
Hello I want to set up a remote printer on 7.2. The printer is located in other linux box (Red Hat 6.1). During the installation I tried to use CUPS but I wasn't sure about the parameters to enter. For instance; remote host: I entered xxx.yyy.zzz which is the name of the linux box where the printer is. However I don't have a clue about the remote queue. What is it? Red Hat 6.1 is running lpr and not CUPS, so do I have to modify any file on the printer server? How about the hosts.lpd? Many thanks for your help. Eduardo Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.
[expert] Some services won't start no matter what ....
Hello I am experiencing some weird problems when booting my linux 7.2. I am sure 100% sure that I clicked on the lpd services on drakeX, that is, I want lpd to start during boot time. Guess what! lpd won't start during boot time: I have to issue the command lpd as root. What is going on? The same happens to ipchains and other services. Many thanks Eduardo Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.
[expert] Hack Kernel - which version is it?
Hello Could someone tell me the exact version of the hack kernl that comes with 7.2? Many thanks Eduardo Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.
Re: [expert] Hack Kernel - which version is it?
pgeorges wrote: > > "Eduardo M. A. M. Mendes" a écrit : > > > > Hello > > Could someone tell me the exact version of the hack kernl that comes > > with 7.2? > > hackkernel-2.4.0-0.31mdk.i586.rpm Thanks a lot. But I was thinking of the kernel number defined by kernel.org. something like kernel.2.4.0..test10.pre99. regards Eduardo > > > Keep in touch with http://mandrakeforum.com: > Subscribe the "[EMAIL PROTECTED]" mailing list. Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.
[expert] lpr doesn't work anymore, error: no default destination available
Hello I have just "upgraded" from 72.rc to 7.2 following the same. I used cups to configure the printer and test page was ok. Unfortunately I can't use lpr command; it always returns: [root@localhost /etc]# lpr modules.conf lpr: error - no default destination available. I don't know what is going on. Does someone have a clue of what is wrong? Many thanks. Eduardo Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.
[expert] X server is gone - font "fixed" not found
Hello Could you someone help me to get X-server back? The error messages I've got are: 1) Failure for servers telnet 974581593 localhost (I had to install 7.2 a couple of times just because of this message) 2) Could not open default font 'fixed' Please help me out; I can't stand installing 7.2 one more time. My 7.02 is running since January without a problem; 7.2, on the other hand, is a nightmare. Thanks a lot. Eduardo Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.
[expert] IP MASQ - Time out
Hello I have just installed strong rules for ipchains on my linux box (7.2). The internal network (NT) seems to be working fine but for some external address I've got an error message: request time out. I have also noticed that pinging the linux server from the linux seever itself returns: No buffer space available. How can I figure out how it is going on? Many thanks Eduardo Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.
[expert] Diald, kppp and Mandrake 7.2 - installation issue
Hello I am trying to install diald with Mandrake 7.2 Kppp is running ok so I know that the modem and connections are fine. I read diald Howto many times but to no avail. Could someone out there help me out? I want to run diald (I got the latest mandrake rpm file .99.1) without wrecking kppp and, if possible, taking advantage of all scripts that I have already installed under kppp. Many thanks. Eduardo Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.
Re: [expert] RPM installation problem!
Hello That package is not broken. It is the exactly same one I have used on LM 8.0. I think that the rpm package on LM 8.1 is somehow different. What do you mean by update? Many thanks Ed - Original Message - From: "Alexander Skwar" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, December 04, 2001 5:53 PM Subject: Re: [expert] RPM installation problem! So sprach »emammendes« am 2001-12-04 um 17:05:16 -0600 : > Hello > > How can I force the installation of a rpm? I have tried > > rpm -Uvh --force gcc-libc5-2.7.2.3-1.i386.rpm > Preparing...### > [100%] >1:gcc-libc5 error: unpacking of archive failed on file > doc/gcc-libc5-2.7.2.3-1: > cpio: Archive file not in header Uhm, you sure that you want to update this? Anyhow, it seems like rpm thinks this package is broken. Alexander Skwar -- >> Wohnung in Gelsenkirchen und Umgebung gesucht! << iso-top.de - Die günstige Art an Linux Distributionen zu kommen Uptime: 5 hours 58 minutes > Want to buy your Pack or Services from MandrakeSoft? > Go to http://www.mandrakestore.com > Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Evolution 1.0 - Downloading everything!
Hello I want to try Evolution 1.0 but I have a dial-up connection at home. It is 129 MB! Is there a way to download the whole thing without using the installer. I can download the files using some of Windows Pc (arghh!) on campus and then saving them to a zip disk. Many thanks Ed Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Evolution 1.0 - Downloading everything!
Hello I want to try Evolution 1.0 but I have a dial-up connection at home. It is 129 MB! Is there a way to download the whole thing without using the installer. I can download the files using some of Windows Pc (arghh!) on campus and then saving them to a zip disk. Many thanks Ed Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Evolution 1.0 - Downloading everything!
Hello I want to try Evolution 1.0 but I have a dial-up connection at home. It is 129 MB! Is there a way to download the whole thing without using the installer. I can download the files using some of Windows Pc (arghh!) on campus and then saving them to a zip disk. Many thanks Ed Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Evolution 1.0 - Downloading everything!
Hello LM 8.0 and 8.1. Regards Ed - Original Message - From: "Brad Felmey" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, December 05, 2001 5:09 PM Subject: Re: [expert] Evolution 1.0 - Downloading everything! > On Wed, 2001-12-05 at 14:47, Eduardo M. A. M. Mendes wrote: > > > I want to try Evolution 1.0 but I have a dial-up connection at home. It is > > 129 MB! Is there a way to download the whole thing without using the > > installer. I can download the files using some of Windows Pc (arghh!) on > > campus and then saving them to a zip disk. > > What version of Mdk at home? > -- > Brad Felmey > > > > Want to buy your Pack or Services from MandrakeSoft? > Go to http://www.mandrakestore.com > Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Digital Camera HP 318 and linux
Hello Does HP 318 work 318? Is there any free soft out there that allows me to load the photos? Kind off topic - How can I have a list of the usd devices connected my pc? Many thanks Eduardo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Digital Camera HP 318 and linux
Hello Thanks a lot. I have downloaded gphoto but I haven't figured out how to set the device :. I have tried usb: but nothing happens. If you have an idea of how to set up the camer please let me know. Many thanks Ed - Original Message - From: "Cecil Watson" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, December 07, 2001 2:35 PM Subject: Re: [expert] Digital Camera HP 318 and linux > "Eduardo M. A. M. Mendes" wrote: > > > > Hello > > > > Does HP 318 work 318? Is there any free soft out there that allows me to > > load the photos? > > > > Kind off topic - How can I have a list of the usd devices connected my pc? > > > > Many thanks > > Eduardo > > > > > Want to buy your Pack or Services from MandrakeSoft? > > Go to http://www.mandrakestore.com > I don't know if gphoto supports it... But give it a shot. gphoto.org > > Cecil > -- > When the code is open, the possibilities are endless. > > > Want to buy your Pack or Services from MandrakeSoft? > Go to http://www.mandrakestore.com > Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Evolution 1.0 and LM 8.1
Hello I would like to install evolution 1.0 on LM 8.1. Redcarpet won't recognize 8.1 as a supported distro. Could you someone tell me which are necessary files and from where I can download them? Does evolution 1.0 allow retrieving emails from POP3 server with SPA (Secure Password Authetication)? Thanks Ed Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Where did LM 8.1 hide /dev/sda4 (parallel zip)?
Hello My parallel zip worked just fine with LM 8.0. Unfortunatley I had to upgrade my system to LM 8.1 (I want o to run multiple Xs). I said unfortunately because LM 8.1 has lots of funny stuff (for instance, ps2 mouse -gpm - is a nightmare!). I tried to issue the command moutn -t vfat /dev/sda4 /mnt/zip2 but an error message came out "no such device". LM 8.1 defined /dev/sda4 on fstab but I've checked the dev dir and I couldn't find sda4 (though /dev/sda is pointing the right place - cdrecord -scanbus confirms that my system has a zip on 0,6,0). How can I create /dev/sda4? Or how can I mount /dev/sda4? Many thanks Ed Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Where did LM 8.1 hide /dev/sda4 (parallel zip)?
Hello I have been using my zip drive with linux since Caldera 1.3 in 1999. All zips have the fourth partition. I have to reformat the disk if I want an ext2 (see mini-howto on zip). You can check that by issuing the command fdisk /dev/sda and then list the partitions. As for your questions, the answer is no because linux can't mount "the whole disk". It is like trying to mount /dev/hda as /. One normally mounts /dev/hda1 or /dev/hda2 or etc. Many thanks Ed > > The 4 in the sda4 is supposed to refer to a partition number on the drive. I > suspect that Zip drives don't have that many partitions. > > Does "mount -t vfat /dev/sda /mnt/zip2" work? Do you have any other SCSI > drives? > > t > > -- > PGP key : http://n12turbo.com/tarragon/public.key > > > Want to buy your Pack or Services from MandrakeSoft? > Go to http://www.mandrakestore.com > Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Where did LM 8.1 hide /dev/sda4 (parallel zip)?
Hello No, it didn't. There is /dev/sda and nothing else. How can I create /dev/sda1 /dev/sda2 ... /dev/sda4? And then mount the zip drive? Thanks Ed - Original Message - From: "J. Grant" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, December 20, 2001 9:42 PM Subject: Re: [expert] Where did LM 8.1 hide /dev/sda4 (parallel zip)? > Did the system create any /dev/sda* devices? > JG > > Eduardo M. A. M. Mendes wrote: > > > Hello > > > > My parallel zip worked just fine with LM 8.0. Unfortunatley I had to > > upgrade my system to LM 8.1 (I want o to run multiple Xs). I said > > unfortunately because LM 8.1 has lots of funny stuff (for instance, ps2 > > mouse -gpm - is a nightmare!). > > > > I tried to issue the command moutn -t vfat /dev/sda4 /mnt/zip2 but an error > > message came out "no such device". LM 8.1 defined /dev/sda4 on fstab but > > I've checked the dev dir and I couldn't find sda4 (though /dev/sda is > > pointing the right place - cdrecord -scanbus confirms that my system has a > > zip on 0,6,0). > > > > How can I create /dev/sda4? Or how can I mount /dev/sda4? > > > > > Want to buy your Pack or Services from MandrakeSoft? > Go to http://www.mandrakestore.com > Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Where did LM 8.1 hide /dev/sda4 (parallel zip)?
Hello The zip drive is working now. What I did was: mknod b part1 8 1 mknod b part2 8 2 mknod b part3 8 3 mknod b part4 8 4 The number 8 comes from the block device created by mandrake. Now I can mount -t vfat /dev/sda4 /mnt/zip2 where /dev/sda4 is a soft link to scsi/.../part4. Thanks a lot. Ed - Original Message - From: "Larry Sword" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, December 23, 2001 2:17 AM Subject: Re: [expert] Where did LM 8.1 hide /dev/sda4 (parallel zip)? > Dinos Kouroushaklis wrote: > > > > I have the same problem but I have another SCSI adapter card, a Tekram 390F. > > When the card is on the machine I can not see the ZipDrive. > > When I remove the Tekram SCSI adapter card, the ZipDrive is fine. > > > > Does anyone know anything on how to make this work? > > > > Regards > > > > At 14:50 21/12/2001 +1100, you wrote: > > >On Fri, 21 Dec 2001 14:32, Eduardo M. A. M. Mendes wrote: > > > > Hello > > > > > > > > My parallel zip worked just fine with LM 8.0. Unfortunatley I had to > > > > upgrade my system to LM 8.1 (I want o to run multiple Xs). I said > > > > unfortunately because LM 8.1 has lots of funny stuff (for instance, ps2 > > > > mouse -gpm - is a nightmare!). > > > > > > > > I tried to issue the command moutn -t vfat /dev/sda4 /mnt/zip2 but an error > > > > message came out "no such device". LM 8.1 defined /dev/sda4 on fstab but > > > > I've checked the dev dir and I couldn't find sda4 (though /dev/sda is > > > > pointing the right place - cdrecord -scanbus confirms that my system has a > > > > zip on 0,6,0). > > > > > > > > How can I create /dev/sda4? Or how can I mount /dev/sda4? > > I haven't followed the complete thread of the problem so if I'm way off > base let me know. > > - > man mknod. > > But you probably don't want to create this. Try making a link to the > device that /dev/sda is pointing. > > Do a ls -l /dev/sda to get the full name of the device, then issue the > proper command to make the link. > > man ln for the correct format. > > After creating the link try again to mount the device. If the entry in > your /etc/fstab is correct and you have the mount point it should work. > > For additional information on the devfsd see the following reference: > > http://www.atnf.csiro.au/~rgooch/linux/docs/devfs.html > > > > > > > > > > > Many thanks > > > > > > > > Ed > > > > > >The 4 in the sda4 is supposed to refer to a partition number on the drive. I > > >suspect that Zip drives don't have that many partitions. > > > > > >Does "mount -t vfat /dev/sda /mnt/zip2" work? Do you have any other SCSI > > >drives? > > > > > >t > > > > > Want to buy your Pack or Services from MandrakeSoft? > > Go to http://www.mandrakestore.com > > > Want to buy your Pack or Services from MandrakeSoft? > Go to http://www.mandrakestore.com > Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Where did LM 8.1 hide /dev/sda4 (parallel zip)?
Hello I have fixed the problem by creating part4 using mknod. Thanks Ed - Original Message - From: "John Haywood" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, December 29, 2001 6:29 PM Subject: Re: [expert] Where did LM 8.1 hide /dev/sda4 (parallel zip)? > On Fri, 21 Dec 2001 14:50, Tarragon Allen wrote: > > On Fri, 21 Dec 2001 14:32, Eduardo M. A. M. Mendes wrote: > [SNIPT] > > > How can I create /dev/sda4? Or how can I mount /dev/sda4? > > > > > > Many thanks > > > > > > Ed > > > > The 4 in the sda4 is supposed to refer to a partition number on the drive. > > I suspect that Zip drives don't have that many partitions. > > > > Does "mount -t vfat /dev/sda /mnt/zip2" work? Do you have any other SCSI > > drives? > > No, the sda4 *is* correct for any Zip cartridges, unless they have been > reformatted (e.g. to ext2). The weird data partition number has, AFAIR, to do > with both MacOS & VFAT partition tables being present on the disk, or at > least *potentially* present. > > As others have answered, either the devfs or the supermount (or an evil combo > of the two) are the most likely suspects in this scenario > > -- > john in syd > > > Want to buy your Pack or Services from MandrakeSoft? > Go to http://www.mandrakestore.com > Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Automatic mount of cdrom, zip etc.
Hello How to switch on the automatic mount of cdroms, zips etc.? LM 8.0 did that on LM 8.1 I have to issue mount -t iso9660 /dev/cdrom /mnt/cdrom. Many thanks Ed - Original Message - From: "John Haywood" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, December 29, 2001 6:29 PM Subject: Re: [expert] Where did LM 8.1 hide /dev/sda4 (parallel zip)? > On Fri, 21 Dec 2001 14:50, Tarragon Allen wrote: > > On Fri, 21 Dec 2001 14:32, Eduardo M. A. M. Mendes wrote: > [SNIPT] > > > How can I create /dev/sda4? Or how can I mount /dev/sda4? > > > > > > Many thanks > > > > > > Ed > > > > The 4 in the sda4 is supposed to refer to a partition number on the drive. > > I suspect that Zip drives don't have that many partitions. > > > > Does "mount -t vfat /dev/sda /mnt/zip2" work? Do you have any other SCSI > > drives? > > No, the sda4 *is* correct for any Zip cartridges, unless they have been > reformatted (e.g. to ext2). The weird data partition number has, AFAIR, to do > with both MacOS & VFAT partition tables being present on the disk, or at > least *potentially* present. > > As others have answered, either the devfs or the supermount (or an evil combo > of the two) are the most likely suspects in this scenario > > -- > john in syd > > > Want to buy your Pack or Services from MandrakeSoft? > Go to http://www.mandrakestore.com > Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Intel 810e Video Card
Hello I just wonder whether someone out there has an Intel 810e video card set up in such a way that multiple Xs are allowed (that is, startx --:0 vt07 and startx --:1 vt08 work). Many thanks Ed Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Seg. fault when mounting /mnt/cdrom
Hello Everytime I try to issue the command mount /mnt/cdrom the system returns a segmentation fault. mount -t iso9660 /dev/cdrom /mnt/cdrom works though. I've also nocited the CDs are not mounted automatically. Why? Many thanks Ed Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] ATAPI (IDE) ZIp on 7.2
Hello I have an atapi (or ide, I am not sure) zip on a dell pc (three scsi disks, dual processor, ide cd and ide zip). When checking dmesg I've noticed that Lm 7.2 found the atapi CD but not the Ide (atapi) zip drive. What do I have to do to access and use the zip drive? Many thanks Ed Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] ATAPI (IDE) ZIp on 7.2
Hello Thanks a lot. I shall try that as soon as I get to the lab. Regards Ed - Original Message - From: "Eric MC" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, January 16, 2002 1:28 PM Subject: Re: [expert] ATAPI (IDE) ZIp on 7.2 > The device must be: > /dev/hdc4 > so > mount /dev/hdec4 ..(here filesystem, user,etc...) /mnt/zip > The /mnt/zip is an exemple of course. > Don't forget do mahe a dir /mnt/zip !! > Eric MC > > On Tue, 15 Jan 2002 19:00:35 -0600 > "Eduardo M. A. M. Mendes" <[EMAIL PROTECTED]> wrote: > > | Hello > | > | I have an atapi (or ide, I am not sure) zip on a dell pc (three scsi disks, > | dual processor, ide cd and ide zip). When checking dmesg I've noticed that > | Lm 7.2 found the atapi CD but not the Ide (atapi) zip drive. What do I have > | to do to access and use the zip drive? > | > | Many thanks > | > | Ed > | > | > | > | > > > Want to buy your Pack or Services from MandrakeSoft? > Go to http://www.mandrakestore.com > Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] SCSI Zip drive under 8.1
Hello I am trying to get a second zip drive to work my system (LM 8.1). The first device is a parallel zip drive and works fine with ppa. The second one is connected to scsi card, tekram 390-F. dmesg shows that 8.1 finds the scsi card and the scsi zip but then the whole thing disappeared (that is, the scsi2 host is detached). After that I can't find the scsi zip. /dev/sda is the parallel zip. What could be the scsi drive? What am I doing wrong? Many thanks Ed Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Will dazzle Creator 80 (usb) work on linux?
Hello The question is pretty much on the subject of this email. If so, how to use dazzle creator 80 usb on linux (software and hardware issues)? Many thanks Éd Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] mandrake 8.2
Hello I had no problem to install 8.0 and 8.1 on my celeron too. The video card i810e gave some trouble as far as multiple sessions were required. It didn't work at on 8.0 but works on 8.1 (one has to change XF86Config though) without DRI. I have tried to install fbdev developed by Antonino Daplas (nice guy!) but it didn't work out as the mandrake kernel didn't accept the patches very well. I am now running kernel2.17mdk that comes with a patch for i810fbdev but I didn't figure out how to enable it. dmesg | grep framebuffer doesn't show a thing which means that framebuffer is not there. At least multiple sessions work with the normal i810.o drive. Not in the conventional way but it works. startx --:1 vt 08 didn't work but startx -- :1.0 does. Why? I hope that 8.2 allows me to have framebuffer on my intel 810e. Ed - Original Message - From: "Tom Badran" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, January 21, 2002 10:27 PM Subject: Re: [expert] mandrake 8.2 > > > What fixes would they be? The fastest, smoothest Mandrake install I've ever > > done was on my wife's Celeron 700 with i810 board with onboard sound, > > graphics and network That was Mdk8.1 tacked onto the second half of an 19Gb > > hard drive that already had M$ 98 on it. Everything was recognised and > > configured correctly without any intervention by me. > > > Some boards with the i810 chipset have a few problems, i think this > includes a series of dell laptops also. The problems are with the > onboard graphics, some machines cant use the fbdev based install, and > some hang when changing modes in X, i.e when testing resolution > settings. There is now a modified install routine specifically for this > chipset i believe. > > I must say that is a very lucky install. Some people have had no end of > trouble with mdk 8.1 (and possibly 8.0, i forget) on the i810 boards. > When mdk 8.2/9 comes out, you should try the new installer and see if it > doesnt cause any unforseen problems with that board. For more info on > this i would recomend you talk to some of the guys on the cooker list. > > Tom > > -- > Tom "Tomahawk" Badran > Imperial College, Department of Computing > - > PGP Public @ certserver.pgp.com > > > > Want to buy your Pack or Services from MandrakeSoft? > Go to http://www.mandrakestore.com > Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Roadrunner and Mandrake 8.1? Some problems!
Hello Although I have no problem to use netscape, kmail, ftp and other network programmes with roadruuner, there is a couple of things that don't work: a) ping - it doesn't work. Why? b) Why does dhpcd changes the computer name from localhost to Computer? This wrecks my samba. Is there a way out here? Many thanks Ed Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] DHCP - how to avoid the hostname to be changed
Hello I use roadrunner as my ISP. During login the hostname is changed from localhost to computer. Besides that, aline on /etc/hosts chamges from 192.168.1791.1 to 127.0.01. This wrecks my internal network. Any/all help would be appreciated. Many thanks Ed Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] dhcpd at boot time - Where?
Hello I wonder what is the script that calls dhdcp -H eth0 during boot time. I need to remove the option -H but I can't find where dhcpd is called. Many thanks Ed Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Choosing between Kde and Gnome with startx
Hello My system is set up not to use the graphic login window (somehow this won't allow me to use multiple Xs) so I need to call KDE I simply issue the command startx -- :.0.0 (or 1.0 or 2.0 ...) &. For gnome I have tried startgnome but there is a problem with display and X won't start. How can I call gnome (or any other win manager) from a command line? Many thanks Ed Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Choosing between Kde and Gnome with startx
Hello Many thanks. Method 1 startx gnome won't call gnome but a different windows manager. Method 2 There is no such xtart on my 8.1 Is it part of X? Ed On Saturday 16 February 2002 07:54 pm, you wrote: > On Sat, 16 Feb 2002 18:49:12 -0600, "Eduardo M. A. M. Mendes" > > <[EMAIL PROTECTED]> wrote: > > My system is set up not to use the graphic login window (somehow this > > won't allow me to use multiple Xs) so I need to call KDE I simply issue > > the command startx -- :.0.0 (or 1.0 or 2.0 ...) &. For gnome I have > > tried startgnome but there is a problem with display and X won't start. > > How can I call gnome (or any other win manager) from a command line? > > Method 1 > > Type the name of your environment after the startx command, > e.g. 'startx gnome' and 'startx kde' > > Method 2 > > Install xtart (part of Mandrake) and type 'xtart'. You will get a menu of > which environment to use. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] mounting a windows 2000 share on 8.1
Hello I just wonder whether how I could mount a windows 2000 located at my lab pc on my home pc running linux. Many thanks Ed Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] (solved) mounting a windows 2000 share on 8.1
Hello I found an answer ot make question: mount -t smbfs. Thanks Ed On Sunday 17 February 2002 10:37 am, you wrote: > Hello > > I just wonder whether how I could mount a windows 2000 located at my lab pc > on my home pc running linux. > > > Many thanks > > Ed Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Choosing between Kde and Gnome with startx
Hello I installed Xtart and now I can choose the windows manager. Howver I don't know how to start different X sessions ( I am not sure whether I can have Kde on -- :0.0 and Gnome on --: 1.0). Many thanks Ed On Sunday 17 February 2002 12:50 pm, you wrote: > On Mon, 18 Feb 2002, Sridhar Dhanapalan wrote: > > Method: the last + 1 = Xtart (Capital 'X') on console, then type the > number set for gnome! > > HTH > > >On Sun, 17 Feb 2002 07:45:30 -0600, "Eduardo M. A. M. Mendes" > > > ><[EMAIL PROTECTED]> wrote: > >> Hello > >> > >> Many thanks. > >> > >> Method 1 > >> > >> startx gnome won't call gnome but a different windows manager. > > > >Try "startx Gnome" (with a capital 'G'). > > > >> Method 2 > >> > >> There is no such xtart on my 8.1 Is it part of X? > > > >xtart is a separate package. Once installed, type 'xtart' to run it. > > > >> On Saturday 16 February 2002 07:54 pm, you wrote: > >> > On Sat, 16 Feb 2002 18:49:12 -0600, "Eduardo M. A. M. Mendes" > >> > > >> > <[EMAIL PROTECTED]> wrote: > >> > > My system is set up not to use the graphic login window (somehow > >> > > this won't allow me to use multiple Xs) so I need to call KDE I > >> > > simply issue the command startx -- :.0.0 (or 1.0 or 2.0 ...) &. For > >> > > gnome I have tried startgnome but there is a problem with display > >> > > and X won't start. How can I call gnome (or any other win manager) > >> > > from a command line? > >> > > >> > Method 1 > >> > > >> > Type the name of your environment after the startx command, > >> > e.g. 'startx gnome' and 'startx kde' > >> > > >> > Method 2 > >> > > >> > Install xtart (part of Mandrake) and type 'xtart'. You will get a menu > >> > of which environment to use. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] (solved) mounting a windows 2000 share on 8.1
Hi That is funny. I am creating iso image of my files in the lab right now. The only think I did was mount -t smbfs /mnt/share. It worked! It is not a local LAN. As for the VPN I have no idea. Many thanks Ed On Sunday 17 February 2002 03:02 pm, you wrote: > Ed, that won't work unless you have direct access to the other PC > through either a local network (LAN) or a virtual private network (VPN). > In your case, if your lab is not in your home, you will need a VPN set > up so that your home PC thinks it is on the same network as your lab PC. > > Dave > > On Sun, 2002-02-17 at 14:38, Eduardo M. A. M. Mendes wrote: > > Hello > > > > I found an answer ot make question: > > > > mount -t smbfs. > > > > Thanks > > > > Ed > > > > On Sunday 17 February 2002 10:37 am, you wrote: > > > Hello > > > > > > I just wonder whether how I could mount a windows 2000 located at my > > > lab pc on my home pc running linux. > > > > > > > > > Many thanks > > > > > > Ed Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] (solved) mounting a windows 2000 share on 8.1
Hello Thanks a lot. I wouldn't dare to say that this is all that I need. As for the security, how can I mount the share files using some kind of encryption? I am afraid that the network admin left the share open to the world. I have tried to use sharity but ti didn't work. Many thanks Ed On Sunday 17 February 2002 05:21 pm, you wrote: > "Eduardo M. A. M. Mendes" wrote: > > Hi > > > > That is funny. I am creating iso image of my files in the lab right now. > > The only think I did was mount -t smbfs /mnt/share. It worked! It > > is not a local LAN. As for the VPN I have no idea. > > > > Many thanks > > Of course this will work (not sure what Dave was thinking about) but > please do not say that this is *all* you needed to do in order to mount > your remote export! What no password, and are you encrypted? Surely you > do not have all your nmb and smb ports (138 & 139) open to the world! > Say it ain't so.. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] startx script for any who want it :)y
Hello Unfortunately MyMyX doesn't work. It wrecks the command line for good. Many thanks Ed On Sunday 17 February 2002 03:59 pm, you wrote: > Here it is, very simple, the README says it all. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] DVD (newbie) full scrren
Hello I have just bought a dvd drive (12x - I hope this is enough for watching DVDs) and have some qustions: a) Is is against the law watching DVDs on linux? b) Full screen - How to get full screen with ogle? I used Crtl-F but the movie doesn't cover all the screen. It is just a retangle in the middle of screen (cinemascope???). Many thanks Ed Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] DVD (newbie) full screen
On Wednesday 20 February 2002 04:42 pm, you wrote: > a) If you're using Ogle, AFAIK in the United States it is technically > illegal because you're using libdvdcss. So much for the land of the free (Restrictions may apply). I don't have a running windows. How can I watch my DvDs? b) Ogle needs an X Server extension > to do full screen. I don't recall what exactly, but if you look at the > archives on the Ogle mailing lists, that will probably tell you. I can do full screen but the is compressed vertically. I'll check the mailing list. Many thanks Ed > > Good luck > > David > > -----Original Message- > From: Eduardo M. A. M. Mendes [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, February 20, 2002 3:31 PM > To: [EMAIL PROTECTED] > Subject: [expert] DVD (newbie) full scrren > > > Hello > > I have just bought a dvd drive (12x - I hope this is enough for watching > DVDs) and have some qustions: > > a) Is is against the law watching DVDs on linux? > b) Full screen - How to get full screen with ogle? I used Crtl-F but the > movie doesn't cover all the screen. It is just a retangle in the middle of > screen (cinemascope???). > > Many thanks > > Ed Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] DVD (newbie) full screen
Hello Thanks a lot for all help. I can now watch DVD movies on my linux box (not illegally as far as I could understand). The movie I've rent was on widescreen (cinemascope) not in the whole screen. I guess if it were it would be distorted. Anyway I came to know that ogle doesn't implement the "wholescreen" I am talking about. PowerDvD that comes with the DvD drive couldn't get the "wholescreen" too. I can't be sure if there is an option on PowerDvd to get it since my windows won't work anymore (It doesn't even boot). Thanks Ed On Thursday 21 February 2002 09:31 am, you wrote: > On Thu, 21 Feb 2002 06:44:40 -0800 (PST), Michael Holt > <[EMAIL PROTECTED]> > > wrote: > > 4:09pm... Sridhar Dhanapalan ran for the door shrieking: > > >> 12x is fine for dvds. No, it's not illegal to watch dvds, it's > > >> illegal to distribute the code that bypasses encryption. I believe > > >> you're talking about 'widescreen'; check the package of the movie > > >> you're watching. > > > > > >Don't confuse DVD-ROM speed ratings with CD-ROM speed ratings. CD-ROM 1x > > >speed is equal to what is required to play an audio CD, i.e. 150KB/s. > > >DVD-ROM 1x speed is equal to what is required to play a DVD video, i.e. > > >1.25MB/s. A 12x speed DVD player theoretically has a peak (not average) > > > speed of 12x this. > > > > > >See http://whatis.techtarget.com/definition/0,,sid9_gci214118,00.html > > > for more details. > > > > Movies from a dvd have to be decoded, it's not the same as listening to a > > music cd at 1x. If you're watching a movie on a player that cannot pull > > the information as fast, then you're going to get choppy playback. 12x > > is well beyond the days of the first dvd players and consequently, it can > > be assumed IMHO that if you're using a 12x, you can watch movies. Of > > course, there are several other factors to consider, but that was all > > that was asked. > > Yes, that's exactly the sort of thing that I was getting at. DVD players > are designed to _at least_ be able to play a DVD movie; this is DVD 1x. > Anything faster is a bonus for data transfers, but unnecessary for video > playing (unless you like to watch in fast-forward ;-) ). > > I was actually responding to the same message as you were, not to you > directly (there was nothing wrong in your post). Sorry, I guess I should've > been a bit clearer about that :-) Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] How to include a new script (daemon) to the boot process?
Hello I have a script that needs to be started everytime I boot my linux boot. I normally start the daemon but issuing the command /usr/local/sharity/sbin/sharity.init start. How can I include this command (script) together with the other commands that start at boot time. I would like to see somehing like: Starting sharity .[OK] Many tanks Ed Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] How to include a new script (daemon) to the boot process?
Hello Many thanks. I did chkconfig --level 3 sharity.init but nothing happens. What kind of output should I expect? . Many thanks Ed Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Is 8.2 upgrade working???
Hello (again) I wonder whether upgrading 81. to 8.2 beta3 is a easy job. I don't want to lose any data. I remeber that using the upgrade option on 8.1 wasn't a good choice. Many thanks Ed Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Would HP notebooks be a good choice for running linux?
Hello Thanks for the help. I will burn both images and test them on the notebook (if they allow me to do that). Many thanks Ed Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Is 8.2 upgrade working???
On Saturday 23 February 2002 11:07 pm, you wrote: > On Sat, Feb 23, 2002 at 05:01:37PM -0600, Eduardo M. A. M. Mendes wrote: > > Hello (again) > > > > I wonder whether upgrading 81. to 8.2 beta3 is a easy job. I don't want > > to lose any data. I remeber that using the upgrade option on 8.1 wasn't a > > good choice. > > Ed: > > I haven't had any luck with upgrades - I tried it with b2 from 8.1, > messed it up. Ended up doing a clean install, leaving ~home intact. Thanks. I think I will have to go for a clean install. Ed Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Help! No lilo - no nothing!
Hello I have installed linux Mandrake on my notebook. The installation went fine (some errors with tcl-8.3 and xpdf rpm files) but I can't boot the system via lilo. I have Windows Xp Home Edition and Mandrake 8.2beta (don't call me crasy please) on the machine. I can run LM 8.2 if I use the boot diskette (it didn't skip this step). LM 8.2 is running ok. I can't run Xp since I have no boot diskette for the OS. How can I fix lilo so as to have a dual boot? My notebook is Sony VAIO. Many thanks Eduardo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Help! No lilo - no nothing! (odd solution)
Hello Thanks for the help. a) I did install lilo at least a dozen times (playing compact. lba, linear, menu etc.). b) I managed to get the menu at boot time by removing the batttery and putting it back again. Yes, somehow SONY doesn't like changes on lilo, so by removing any kind of power suppy from the notebook SONY's "memory" is lost and lilo changes are accepted. The only problem is something funny characters just before the word boot:. I have nmo idea what causes that. Many thanks Ed On Monday 04 March 2002 08:08 am, you wrote: > You probably didn't install it on the MBR. > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of Eduardo M. A. M. > Mendes > Sent: Sunday, March 03, 2002 11:24 PM > To: [EMAIL PROTECTED] > Subject: [expert] Help! No lilo - no nothing! > > > Hello > > I have installed linux Mandrake on my notebook. The installation went fine > (some errors with tcl-8.3 and xpdf rpm files) but I can't boot the system > via > lilo. I have Windows Xp Home Edition and Mandrake 8.2beta (don't call me > crasy please) on the machine. > > I can run LM 8.2 if I use the boot diskette (it didn't skip this step). > LM 8.2 is running ok. I can't run Xp since I have no boot diskette for the > OS. > > How can I fix lilo so as to have a dual boot? > > My notebook is Sony VAIO. > > Many thanks > > Eduardo > > > > > _ > Do You Yahoo!? > Get your free @yahoo.com address at http://mail.yahoo.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Two mice wokrinf at the same time
Hello How can I get the mouse that comes with the notebook working at the same time with another mouse attached the serial port? I have installed the serial mouse succesfully but when I reboot the notebook without it (I chose the option keep configuration - I think I should have gne for do nothing) the ps2 notebook mouse doesn't work anymore. Many thanks Ed Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Two mice working at the same time
Hello Many thanks. Do you mind to elaborate a bit more on the solutions? I don't think I can implement that without more help. a) SendCoreEvents - What do I have to do here? b) Two layouts - does it mean that I have to get rid of the graphical login interface? Is layout 1 a XFree86 config file? Many thanks Ed On Monday 04 March 2002 09:35 pm, you wrote: > You can use SendCoreEvents to enable both > > or a more eligant solution is to have 2 layouts, this is what i use > the first one is default, so you can juse use "startx" > > JG > > If you just want to be able to specify which mouse to use from the command > line, just use two layouts, and select between them using one of these > commands: > "startx -layout layout1" > "startx -layout layout2" > > > > Section "ServerLayout" > Identifier "layout1" > Screen "screen1" > InputDevice "mouse1" "CorePointer" > EndSection > > Section "ServerLayout" > Identifier "layout2" > Screen "screen1" > InputDevice "mouse2" "CorePointer" > EndSection > > Galen Brooks <[EMAIL PROTECTED]> > Stop them! They're pirating my vaporware! > > Eduardo M. A. M. Mendes wrote: > > Hello > > > > How can I get the mouse that comes with the notebook working at the same > > time with another mouse attached the serial port? > > > > I have installed the serial mouse succesfully but when I reboot the > > notebook without it (I chose the option keep configuration - I think I > > should have gne for do nothing) the ps2 notebook mouse doesn't work > > anymore. > > > > Many thanks > > > > Ed Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Two mice working at the same time
Hi ya I worked except for the paer of SendCoreEvents. Many thanks Ed On Monday 04 March 2002 10:44 pm, you wrote: > Hi Ed, > > a) type "man XF86Config" :P > b) Yep, get rid of it! But if 90% of the time u only use the default > mouse like me set the default layout then setup a different lilo linux > or pass an option to go into a different runlevel. > > but thats more hastle > > i do > > $startx to use my USB mouse (enableing the touch mouse on my laptop) > > $ startx -- -layout 1 (use touch mouse) > > SendCoreEvents means you can have both mice working with X at the same > time, but this is more anoying than useful for me as when i type if i > tap the touch pad mouse the cursor jumps to a differend postion when > typing. > > Good luck > > JG > > ps my XF86Config-4 file, layout 2 is default as it comes first > > > - > > # ** > # Pointer section > # ** > > Section "InputDevice" > > Identifier "mouse2" > Driver "mouse" > Option "Protocol""IMPS/2" > Option "Device" "/dev/mouse" > Option "ZAxisMapping" "4 5" > > # ChordMiddle is an option for some 3-button Logitech mice > > #Option "ChordMiddle" > > EndSection > > Section "InputDevice" > > Identifier "mouse1" > Driver "mouse" > Option "Protocol""PS/2" > Option "Device" "/dev/mouse1" > Option "ZAxisMapping" "4 5" > > # ChordMiddle is an option for some 3-button Logitech mice > > #Option "ChordMiddle" > > EndSection > > > Section "ServerLayout" > Identifier "2" > Screen "screen1" > InputDevice "mouse2" "CorePointer" > InputDevice "Keyboard1" "CoreKeyboard" > EndSection > > Section "ServerLayout" > Identifier "1" > Screen "screen1" > InputDevice "mouse1" "CorePointer" > InputDevice "Keyboard1" "CoreKeyboard" > EndSection > > Eduardo M. A. M. Mendes wrote: > > Hello > > > > Many thanks. Do you mind to elaborate a bit more on the solutions? I > > don't think I can implement that without more help. > > > > a) SendCoreEvents - What do I have to do here? > > b) Two layouts - does it mean that I have to get rid of the graphical > > login interface? Is layout 1 a XFree86 config file? > > > > Many thanks > > > > Ed > > > > On Monday 04 March 2002 09:35 pm, you wrote: > >>You can use SendCoreEvents to enable both > >> > >>or a more eligant solution is to have 2 layouts, this is what i use > >>the first one is default, so you can juse use "startx" > >> > >>JG > >> > >>If you just want to be able to specify which mouse to use from the > >> command line, just use two layouts, and select between them using one of > >> these commands: > >> "startx -layout layout1" > >> "startx -layout layout2" > >> > >> > >> > >> Section "ServerLayout" > >> Identifier "layout1" > >>Screen "screen1" > >>InputDevice "mouse1" "CorePointer" > >> EndSection > >> > >> Section "ServerLayout" > >> Identifier "layout2" > >>Screen "screen1" > >>InputDevice "mouse2" "CorePointer" > >> EndSection > >> > >>Galen Brooks <[EMAIL PROTECTED]> > >>Stop them! They're pirating my vaporware! > >> > >>Eduardo M. A. M. Mendes wrote: > >>>Hello > >>> > >>>How can I get the mouse that comes with the notebook working at the same > >>>time with another mouse attached the serial port? > >>> > >>>I have installed the serial mouse succesfully but when I reboot the > >>>notebook without it (I chose the option keep configuration - I think I > >>>should have gne for do nothing) the ps2 notebook mouse doesn't work > >>>anymore. > >>> > >>>Many thanks > >>> > >>>Ed > > > > > > > > Want to buy your Pack or Services from MandrakeSoft? > > Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Gphoto 2 on 8.1
Hello Could someone tell me the steps for using gphoto 2 on 8.1? It needs the lastest usb lib but I am not sure what to do. Many thanks Ed Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Is there a list of bugs for 7.2 beta 3?
Hello I am running 7.2 beta 3 on my pc. I noticed that KDE is not working as it should. Is there a place where I can find the bugs for this new release? Is there a list for discussing problems with 7.2? Thanks a lot. Eduardo Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.
[expert] How to compile a kernel with the same options of the default one?
Hello I want to test kernel 2.4.0 but, at the same, I want to compile with the same options of a standard mandrake 7.0 kernel. Is it possible? If so, how? Many thanks Eduardo Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.
[expert] VMware and turning on DGA mode
Hello It has been suggested that my question on dga with vmware should be posted to this list, os here it is: I need to turn the option DGA on in XF86Config so as to use vmware. Would someone know how to do it? I checked XF86Config and there is nothing there relating to dga. The video card is an old Cirrus Logic 5465 and my pc is running 7.2. Many thanks Eduardo Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.
[expert] Has someone managed to compile Nautilus preview 2 on 7.2?
Hello I was wondering whether someone has managed to compile Nautilus preview 2 on 7.2. I've got stuck on the first step: compiling oaf-0.6.0. Many thanks Eduardo Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.
[expert] VMware and Mandrake 7.2 blues - Please help me out!
Hello I have installed vmware 2.0.3 under Mandrake 7.2. Unfortunately things went as I though they would be: 1) NO DGA modes even after checking, rechecking if the line omit dga is commented out on XF86Config. Is there anything else I can do? 2) The parallel zip stops working as soon as vmware is on. 3) All printouts sent from the host get stuck. If you have a similar experience or a solution, please let me know. Many thanks Eduardo Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.
Re: [expert] VMware and Mandrake 7.2 blues - Please help me out!
Chris Spencer wrote: > > On Saturday 11 November 2000 14:06, you wrote: > > > > Hello > > I have installed vmware 2.0.3 under Mandrake 7.2. Unfortunately things > > went as I though they would be: > > 1) NO DGA modes even after checking, rechecking if the line omit dga is > > commented out on XF86Config. Is there anything else I can do? > > DGA is dependent on your video driver. If you video driver does not support > DGA you're outta luck. Likewise, if you have an Nvidia card and are running > the Nvidia drivers DGA will not work either with Vmware. Hello How can I be sure of that? Here is the output of xdpyinfo [root@localhost bin]# xdpyinfo name of display::0.0 version number:11.0 vendor string:Linux Mandrake (XFree86 4.0.1, patch level 25mdk) vendor release number:4001 maximum request size: 4194300 bytes motion buffer size: 256 bitmap unit, bit order, padding:32, LSBFirst, 32 image byte order:LSBFirst number of supported pixmap formats:6 supported pixmap formats: depth 1, bits_per_pixel 1, scanline_pad 32 depth 4, bits_per_pixel 8, scanline_pad 32 depth 8, bits_per_pixel 8, scanline_pad 32 depth 15, bits_per_pixel 16, scanline_pad 32 depth 16, bits_per_pixel 16, scanline_pad 32 depth 24, bits_per_pixel 32, scanline_pad 32 keycode range:minimum 8, maximum 255 focus: window 0x1aa, revert to PointerRoot number of extensions:23 BIG-REQUESTS DOUBLE-BUFFER DPMS Extended-Visual-Information FontCache LBX MIT-SCREEN-SAVER MIT-SHM MIT-SUNDRY-NONSTANDARD SECURITY SHAPE SYNC TOG-CUP XC-APPGROUP XC-MISC XFree86-Bigfont XFree86-DGA XFree86-Misc XFree86-VidModeExtension XInputExtension XKEYBOARD XTEST XVideo default screen number:0 number of screens:1 screen #0: dimensions:1024x768 pixels (283x212 millimeters) resolution:92x92 dots per inch depths (1):24 root window id:0x25 depth of root window:24 planes number of colormaps:minimum 1, maximum 1 default colormap:0x21 default number of colormap cells:256 preallocated pixels:black 0, white 16579836 options:backing-store NO, save-unders NO largest cursor:1024x768 current input event mask:0xf84033 KeyPressMask KeyReleaseMask EnterWindowMask LeaveWindowMask KeymapStateMask SubstructureNotifyMask SubstructureRedirectMask FocusChangeMask PropertyChangeMask ColormapChangeMask number of visuals:1 default visual id: 0x22 visual: visual id:0x22 class:TrueColor depth:24 planes available colormap entries:256 per subfield red, green, blue masks:0xff, 0xff00, 0xff significant bits in color specification:6 bits It seems that the card accepts DGA, doesn't it? Many thanks Eduardo > > -Chris > > > Keep in touch with http://mandrakeforum.com: > Subscribe the "[EMAIL PROTECTED]" mailing list. Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.