RE: [expert] Nvidia+Mandrake 8.1+dual cpu:s = still crash!
mån 2001-11-26 klockan 13.09 skrev Jose M. Sanchez: Go into the BIOS and make sure that you have AGP set to 2x instead of 4x. I did, (Enabel ASP 4x is now set to False). If there are options to turn of FASTWRITES and SIDEBAND ADDRESSING turn off both. Could only set FASTWRITES to disable Sideband addressing causes a LOT of problems with GeForce video cards as does 4x on some motherboards. I also did a 'cat /proc/nv/card0' to faund out that both FASTWRITES and SIDEBAND ADDRESSING was disabeld by the driver and it used AGPART and 2x. This was the setnings both before and after I disabeld 4x and FW in BIOS. The mashin still hangs... I haven't have time to check if there are any jumpers on the MB. I will check the jumpers soon and tell you the status on that. Also some MB's have a special jumper for the AGP slot. Check the manual. Moving it from one side to the other often has a lot of impact on Nvidia cards and system stability and freezing. -JMS |-Original Message- |From: [EMAIL PROTECTED] |[mailto:[EMAIL PROTECTED]] On Behalf Of Erik Gunther |Sent: Monday, November 26, 2001 6:48 AM |To: Mandrake-expertlista |Subject: [expert] Nvidia+Mandrake 8.1+dual cpu:s = crash! | | | |Hi I have a serious problem. My computer keeps craching after |a while. When I have left the computer and a user are loged on |(in X) the compurer just freeze. All things stopes even the |network (it do not even answer to ping). If I run xscreensaver |the computer freeze more often then when xscreensaver is not |running. When no one are logged in the computer crash more seldom. | |Unfortunately there are no enteries in the log about the |freeze so I don't exactly know whats causing the problem. But |I know that much that my gateway that also runs LM8.1 don't |have this problem. My gateway don't have a Nvidia card nor |dual CPU:s I don't know if it's relevant. | |I have 2.4.13 kernel(SMP) and Nvidias 1.1541 driver for my |Geforce2 GTS on a dual CPU intel-system. | |Do anyone else have this problem or even better know a sulotion? | |/erikg - | | | | Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Compiling Nvidia-driver --solved
On Thu, 10 May 2001, Jürgen Zimmermann wrote: Have you tried these steps: cd /usr/src/linux make mrproper uname -r [edit Makefile: Change the EXTRAVERSION to match the suffix of uname, e.g. 27mdksmp in my case] cp /boot/config-`uname -r` .config make oldconfig make dep Now you can rebuild the NVidia kernel driver for your system. rpm --rebuild NVIDIA_kernel-0.9-769.src.rpm rpm -ivh [whereever the compiled module is put to] Worked for me... And for me too. Thanks. I wonder if it is okej to mail your kernelsorce-fix to nvidia so that they can include it in there FAQ? -- /EgU * Erik (EgU) Günther can be found at: Netch Technologies AB | www.netch.se/~erikg +46 (0)46 - 272 46 35 | [EMAIL PROTECTED] * Fortune:
Re: [expert] Compiling Nvidia-driver for SMP kernel
On Mon, 7 May 2001, Erik Günther wrote: On Thu, 3 May 2001, Erik Günther wrote: On Thu, 3 May 2001, Rial Juan wrote: I also have smp; I just grabbed the src.rpm from their site, did a 'rpm --rebuild' on it, and it works like a charm. Could you please send that rpm to me so I try? Could you please or someone else have Nvidias driver compiled for 2.4.3 and SMP that could send a copy to me? Thanks Rial I got it. But it still don't work. I got the Nvidia_kernel-0.9-769.i686.rpm from Rial that works fine for him and don't work at all for me. I got the error you see below. And as you can see it missing symbols to several primary symbols as kill_proc, strncpy_from_user, create_proc_entry, etc, etc. The question is why? I use the kernel that comes with LM8.0 (2.4.3-20) I have not recompiled it. I have a dual P3 mashine and the driver is know to work on other SMP mashines (Rial:s). [root@localhost /tmp]# rpm -Uhv NVIDIA_kernel-0.9-769.i686.rpm NVIDIA_kernel ## depmod: *** Unresolved symbols in /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol __ioremap_R9eac042a /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol tq_immediate_R0da0dcd1 /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol boot_cpu_data_R65dda927 /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol schedule_timeout_R17d59d01 /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol inter_module_get_Rf6a0ce24 /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol do_gettimeofday_R72270e35 /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol inter_module_put_R6b99f7d8 /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol pci_read_config_byte_R59f4893e /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol pcibios_read_config_word_Raa9effd7 /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol kmalloc_R93d4cfe6 /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol init_mm_Rf1fe99f5 /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol mtrr_add_R56179c5f /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol vfree_R2fd1d81c /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol register_chrdev_R3b2bdff1 /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol bh_task_vec_R284177b8 /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol unregister_chrdev_Rc192d491 /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol create_proc_entry_Rcce2ea9f /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol pci_write_config_word_Ra7f43c5c /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol high_memory_R8a7d1c31 /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol inter_module_get_request_Rb69f826b /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol pcibios_read_config_byte_Rd80115e1 /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol __generic_copy_to_user_Rd523fdd3 /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol __pollwait_Rffb1dd2e /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol proc_root_R9ea1b4d2 /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol __generic_copy_from_user_R116166aa /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol remove_proc_entry_Rd419f102 /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol remap_page_range_R69d01e73 /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol sprintf_R3c2c5af5 /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol pci_devices_R7a84b102 /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol pcibios_find_class_Ref333f7b /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol mtrr_del_R272d394e /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol __udelay_R9e7d6bd0 /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol free_irq_Rf20dabd8 /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol tasklet_hi_vec_Rbb06575f /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol pcibios_write_config_word_R4f1c2e33 /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol pci_write_config_dword_R8b8c6dae /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol kfree_R037a0cba /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol pci_read_config_word_Rb4c9a637 /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol pci_read_config_dword_Rf3b4e49e /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol __wake_up_R2c77a2af /lib/modules/2.4.3-20mdksmp/kernel/video
RE: [expert] Compiling Nvidia-driver for SMP kernel
On Wed, 9 May 2001, Gerrit Visser wrote: Hi Erik, I've also got it to work without any problems: I've installed the Kernel source from the 2nd CD (required to compile NVidia kernel module correctly). Removed all libmesa stuff. Used the tar.gz files to compile install the drivers modules (equivalent to the rpm rebuild method). Changed XF86Config-4 to nvidia module and use glx option. Created softlinks from the libmesa stuff to the NVidia libraries. Started X. Everything worked fine. I'm attaching my NVidia module. Hope it will work for you. Thanks I will try it but I'm fairly certain that your driver also will miss tons of symbols because Rial:s and mine module both faild on the second step: insmod NVdriver I can't try you driver until I'm at home, my computer isn't online jet... so I can't be certain that your driver also will fail (hope not) but why did I get all this unresolved symbol? Several of this symbols look like they are primary symbols, the kernel would panic if they wheren't there. Have you recompiled you kernel your self, I haven't? Gerrit -Original Message- Thanks Rial I got it. But it still don't work. I got the Nvidia_kernel-0.9-769.i686.rpm from Rial that works fine for him and don't work at all for me. I got the error you see below. And as you can see it missing symbols to several primary symbols as kill_proc, strncpy_from_user, create_proc_entry, etc, etc. The question is why? I use the kernel that comes with LM8.0 (2.4.3-20) I have not recompiled it. I have a dual P3 mashine and the driver is know to work on other SMP mashines (Rial:s). [root@localhost /tmp]# rpm -Uhv NVIDIA_kernel-0.9-769.i686.rpm NVIDIA_kernel ## depmod: *** Unresolved symbols in /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol __ioremap_R9eac042a /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol tq_immediate_R0da0dcd1 /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol boot_cpu_data_R65dda927 /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol schedule_timeout_R17d59d01 /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol inter_module_get_Rf6a0ce24 /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol do_gettimeofday_R72270e35 /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol inter_module_put_R6b99f7d8 /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol pci_read_config_byte_R59f4893e /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol pcibios_read_config_word_Raa9effd7 /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol kmalloc_R93d4cfe6 /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol init_mm_Rf1fe99f5 /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol mtrr_add_R56179c5f /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol vfree_R2fd1d81c /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol register_chrdev_R3b2bdff1 /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol bh_task_vec_R284177b8 /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol unregister_chrdev_Rc192d491 /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol create_proc_entry_Rcce2ea9f /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol pci_write_config_word_Ra7f43c5c /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol high_memory_R8a7d1c31 /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol inter_module_get_request_Rb69f826b /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol pcibios_read_config_byte_Rd80115e1 /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol __generic_copy_to_user_Rd523fdd3 /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol __pollwait_Rffb1dd2e /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol proc_root_R9ea1b4d2 /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol __generic_copy_from_user_R116166aa /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol remove_proc_entry_Rd419f102 /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol remap_page_range_R69d01e73 /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol sprintf_R3c2c5af5 /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol pci_devices_R7a84b102 /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol pcibios_find_class_Ref333f7b /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol mtrr_del_R272d394e /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol __udelay_R9e7d6bd0 /lib/modules/2.4.3-20mdksmp/kernel/video/NVdriver: unresolved symbol
Re: [expert] Compiling Nvidia-driver for SMP kernel
On Thu, 3 May 2001, Erik Günther wrote: On Thu, 3 May 2001, Rial Juan wrote: I also have smp; I just grabbed the src.rpm from their site, did a 'rpm --rebuild' on it, and it works like a charm. Could you please send that rpm to me so I try? Could you please or someone else have Nvidias driver compiled for 2.4.3 and SMP that could send a copy to me? BTW don't send the rpm to the expert-list some maileservers and users will probobly be uppset ;-) Still stands I presume :-) -- /EgU * Erik (EgU) Günther can be found at: Netch Technologies AB | www.netch.se/~erikg +46 (0)46 - 272 46 35 | [EMAIL PROTECTED] * Fortune:
[expert] Compiling Nvidia-driver for SMP kernel
I have now tried several times to compile my Nvidia driver (from Nvidia) but no success. It always compiles and always fails to load the module into the kernel becouse on several unresulved symbols. So I think I do the same misstake over and over agin but what? I have tried: Unziping the tar and make. Unziping the tar and make SYSINCLUDE=/usr/src/linux/include rpm --rebuild NVIDIA_kernel.rpm rpm --rebuild --target=i586 NVIDIA_kernel.rpm All build, all faild to load the module. I prefer to use rpm and if I get a success with tar I can easy include that into the RPM. I have: Linux-Mandrak 8.0 (kernel 2.4.3. as you didn't know that ;-) ) two P3 800Mhz (SMP) Nvidia Geforce2 Ultra (Asus7700) -- /EgU * Erik (EgU) Günther can be found at: Netch Technologies AB | www.netch.se/~erikg +46 (0)46 - 272 46 35 | [EMAIL PROTECTED] * Fortune: Today is the tomorrow you worried about yesterday.
Re: [expert] Compiling Nvidia-driver for SMP kernel
On Thu, 3 May 2001, Rial Juan wrote: I also have smp; I just grabbed the src.rpm from their site, did a 'rpm --rebuild' on it, and it works like a charm. Could you please send that rpm to me so I try? BTW don't send the rpm to the expert-list some maileservers and users will probobly be uppset ;-) -- /EgU * Erik (EgU) Günther can be found at: Netch Technologies AB | www.netch.se/~erikg +46 (0)46 - 272 46 35 | [EMAIL PROTECTED] * Fortune: Quigley's Law: Whoever has any authority over you, no matter how small, will atttempt to use it.
[expert] Mandrake 8 GLX (Nvidia)
Hi. First of all I installed LM8 last night and it worked fine for me. But acording to LM:s homepage LM8 cames with accellerated 3D for a number of vendors (Matrox, Nvidia, ATI(?)) but it doesn't seam to be aktivated. I started with adding Load GLX and Load dri to the XF86Config-4 (I'm useing X 4.0.3). Then GLX programs was able to run but slow. When I was useing LM7.2 I could use Nvidias driver and Nvidias GLX the all GLX programs was fast. (100fps in gears, fullscreen) So where is the accellerated 3D in LM8 I didn't find any RPM that could indicate that it hade Nvidias drivers... Anyone knows what to do? PS I'm haveing a SMP mashine with two 800 P3 and Nvidias Geforce2 Ultra (Asus 7700) DS. -- /EgU * Erik (EgU) Günther can be found at: Netch Technologies AB | www.ludat.lth.se/~dat94egu +46 (0)46 - 272 46 35 | [EMAIL PROTECTED] * Fortune: And tomorrow will be like today, only more so. -- Isaiah 56:12, New Standard Version
Re: [expert] Mandrake 8 GLX (Nvidia)
On Tue, 24 Apr 2001, Haim Ashkenazi wrote: Hi just download the tar files from 'www.nvidia.com' and follow the instructions on the how-to. it's very simple and works without a problem. pay special attention to the part that deals with conflicts with Mesa libraries (in my case I had to delete all the '/usr/X11R6/lib/libGL.so*'). Hmmm... With rpm did you use? There aren't any drivers for LM8 the closesed is for RH7.1 that use 2.4.? kernel. ...or did you use src.rpm? On Tue, Apr 24, 2001 at 09:05:49AM +0200, Erik Günther wrote: Hi. First of all I installed LM8 last night and it worked fine for me. But acording to LM:s homepage LM8 cames with accellerated 3D for a number of vendors (Matrox, Nvidia, ATI(?)) but it doesn't seam to be aktivated. I started with adding Load GLX and Load dri to the XF86Config-4 (I'm useing X 4.0.3). Then GLX programs was able to run but slow. When I was useing LM7.2 I could use Nvidias driver and Nvidias GLX the all GLX programs was fast. (100fps in gears, fullscreen) So where is the accellerated 3D in LM8 I didn't find any RPM that could indicate that it hade Nvidias drivers... Anyone knows what to do? PS I'm haveing a SMP mashine with two 800 P3 and Nvidias Geforce2 Ultra (Asus 7700) DS. -- /EgU * Erik (EgU) Günther can be found at: Netch Technologies AB | www.ludat.lth.se/~dat94egu +46 (0)46 - 272 46 35 | [EMAIL PROTECTED] * Fortune: And tomorrow will be like today, only more so. -- Isaiah 56:12, New Standard Version Good Luck -- /EgU * Erik (EgU) Günther can be found at: Netch Technologies AB | www.netch.se/~erikg +46 (0)46 - 272 46 35 | [EMAIL PROTECTED] * Fortune: I thought YOU silenced the guard!
Re: [expert] NVidia 2.4.2 fail
On Wed, 4 Apr 2001, Stefaans Mostert wrote: Erik Gnther wrote: Hi I'm trying to compile NVidias driver for my Asus7700 card and I have LM 8.0b (with kernel 2.4.2). On top of that I have two processors (SMP). First of all when doing rpm --recompid NVIdia-kernel-0.9-769.src.rpm it works fine but it dosen't add "-D__SMP__" or "-DCONFIG_SMP" when compiling. And ofcause when installing it fails big time. missing tons of symbols. Then I tried to force to adding of one of the SMP defines. Still the same result. What do I do wrong? BTW I hope Mandrake includes DRI-drivers from NVidia and Matox in LM8.0. Not activated by default but when the user ask for them. -- O.K First do rpm -Uvh Nvidia. Then go and look in /usr/src/RPM/SPECS/ You will find a spec file there Then give it rpm -ba --clean --rmsource then go and look in /usr/src/RPM/RPMS/i686/ (or your cpu) You should find a brand spanking new rpm file there that you can just install in the usual way ;-) But this is the samething as doing rpm --rebuild and it still fails. I even tried to use kgcc insted and it didn't help! The compiling part goes well (no errrors or other strange things) but the installing part fails. The output is: /lib/modules/2.4.2-24mdksmp/video/NVdriver: unresolved symbol __ioremap_R9eac042a /lib/modules/2.4.2-24mdksmp/video/NVdriver: unresolved symbol __pollwait_R7a734982 /lib/modules/2.4.2-24mdksmp/video/NVdriver: unresolved symbol remove_proc_entry_Rd21e475f /lib/modules/2.4.2-24mdksmp/video/NVdriver: unresolved symbol tq_immediate_R0da0dcd1 /lib/modules/2.4.2-24mdksmp/video/NVdriver: unresolved symbol boot_cpu_data_R65dda927 /lib/modules/2.4.2-24mdksmp/video/NVdriver: unresolved symbol schedule_timeout_R17d59d01 /lib/modules/2.4.2-24mdksmp/video/NVdriver: unresolved symbol inter_module_get_Rf6a0ce24 /lib/modules/2.4.2-24mdksmp/video/NVdriver: unresolved symbol do_gettimeofday_R72270e35 /lib/modules/2.4.2-24mdksmp/video/NVdriver: unresolved symbol inter_module_put_R6b99f7d8 /lib/modules/2.4.2-24mdksmp/video/NVdriver: unresolved symbol register_chrdev_R2238e2e0 /lib/modules/2.4.2-24mdksmp/video/NVdriver: unresolved symbol pci_read_config_byte_R59f4893e /lib/modules/2.4.2-24mdksmp/video/NVdriver: unresolved symbol pcibios_read_config_word_Raa9effd7 /lib/modules/2.4.2-24mdksmp/video/NVdriver: unresolved symbol kmalloc_R93d4cfe6 /lib/modules/2.4.2-24mdksmp/video/NVdriver: unresolved symbol mtrr_add_R56179c5f /lib/modules/2.4.2-24mdksmp/video/NVdriver: unresolved symbol vfree_R2fd1d81c /lib/modules/2.4.2-24mdksmp/video/NVdriver: unresolved symbol __global_cli /lib/modules/2.4.2-24mdksmp/video/NVdriver: unresolved symbol bh_task_vec_R284177b8 /lib/modules/2.4.2-24mdksmp/video/NVdriver: unresolved symbol unregister_chrdev_Rc192d491 /lib/modules/2.4.2-24mdksmp/video/NVdriver: unresolved symbol pci_write_config_word_Ra7f43c5c /lib/modules/2.4.2-24mdksmp/video/NVdriver: unresolved symbol high_memory_R8a7d1c31 /lib/modules/2.4.2-24mdksmp/video/NVdriver: unresolved symbol inter_module_get_request_Rb69f826b /lib/modules/2.4.2-24mdksmp/video/NVdriver: unresolved symbol mem_map_Rfc4a37ce /lib/modules/2.4.2-24mdksmp/video/NVdriver: unresolved symbol pcibios_read_config_byte_Rd80115e1 /lib/modules/2.4.2-24mdksmp/video/NVdriver: unresolved symbol __generic_copy_to_user_Rd523fdd3 /lib/modules/2.4.2-24mdksmp/video/NVdriver: unresolved symbol proc_root_R286c1644 /lib/modules/2.4.2-24mdksmp/video/NVdriver: unresolved symbol __generic_copy_from_user_R116166aa /lib/modules/2.4.2-24mdksmp/video/NVdriver: unresolved symbol remap_page_range_R69d01e73 /lib/modules/2.4.2-24mdksmp/video/NVdriver: unresolved symbol sprintf_R3c2c5af5 /lib/modules/2.4.2-24mdksmp/video/NVdriver: unresolved symbol init_mm_Rc502f642 /lib/modules/2.4.2-24mdksmp/video/NVdriver: unresolved symbol pci_devices_R7a84b102 /lib/modules/2.4.2-24mdksmp/video/NVdriver: unresolved symbol pcibios_find_class_Ref333f7b /lib/modules/2.4.2-24mdksmp/video/NVdriver: unresolved symbol tqueue_lock /lib/modules/2.4.2-24mdksmp/video/NVdriver: unresolved symbol mtrr_del_R272d394e /lib/modules/2.4.2-24mdksmp/video/NVdriver: unresolved symbol create_proc_entry_R6d2625b4 /lib/modules/2.4.2-24mdksmp/video/NVdriver: unresolved symbol __udelay_R9e7d6bd0 /lib/modules/2.4.2-24mdksmp/video/NVdriver: unresolved symbol free_irq_Rf20dabd8 /lib/modules/2.4.2-24mdksmp/video/NVdriver: unresolved symbol __global_save_flags /lib/modules/2.4.2-24mdksmp/video/NVdriver: unresolved symbol tasklet_hi_vec_Rbb06575f /lib/modules/2.4.2-24mdksmp/video/NVdriver: unresolved symbol pcibios_write_config_word_R4f1c2e33 /lib/modules/2.4.2-24mdksmp/video/NVdriver: unresolved symbol pci_write_config_dword_R8b8c6dae /lib/modules/2.4.2-24mdksmp/video/NVdriver: unresolved symbol kfree_R037a0cba /lib/modules/2.4.2-24mdksmp/video/NVdriver: unresolved symbol pci_read_config_word_Rb4c9a637 /lib/modules/2.4.2-24mdksmp/video/NVdriver: unresolved symbol pci_read_config_dword_Rf3b4e49e
[expert] NVidia 2.4.2 fail
Hi I'm trying to compile NVidias driver for my Asus7700 card and I have LM 8.0b (with kernel 2.4.2). On top of that I have two processors (SMP). First of all when doing rpm --recompid NVIdia-kernel-0.9-769.src.rpm it works fine but it dosen't add "-D__SMP__" or "-DCONFIG_SMP" when compiling. And ofcause when installing it fails big time. missing tons of symbols. Then I tried to force to adding of one of the SMP defines. Still the same result. What do I do wrong? BTW I hope Mandrake includes DRI-drivers from NVidia and Matox in LM8.0. Not activated by default but when the user ask for them. -- /EgU * Erik (EgU) Gnther can be found at: Netch Technologies AB | www.ludat.lth.se/~dat94egu +46 (0)46 - 272 46 35 | [EMAIL PROTECTED] * Fortune: The fact that boys are allowed to exist at all is evidence of a remarkable Christian forbearance among men. -- Ambrose Bierce
Re: [expert] RealPlayer8 failes
On Thu, 29 Mar 2001, Larry Marshall wrote: Benjamin Sher wrote: Just for the record: RealPlayer 8.0-1 rpm will NOT install. No big deal. I'll keep using Real7. Of topic but where can I get hold of RealPlayer 8? -- /EgU * Erik (EgU) Gnther can be found at: Netch Technologies AB | www.ludat.lth.se/~dat94egu +46 (0)46 - 272 46 35 | [EMAIL PROTECTED] * Fortune: The whole world is a scab. The point is to pick it constructively. -- Peter Beard
Re: [expert] Lost sight of point
On Fri, 30 Mar 2001, David Rankin wrote: Okej so LM8 will probobly be for i586. Thats fine for me. But how do I recompile the hole distro to be i686 just for me. I mean if I start to recompile LM8.src on LM8.i586 the hole distro will bi based on a i586 glibc and a i586 kernel... or do I miss something? And the next problem how do I recompile the hole distro? rpm --rebuild *.src.rpm ? -- /EgU * Erik (EgU) Gnther can be found at: Netch Technologies AB | www.ludat.lth.se/~dat94egu +46 (0)46 - 272 46 35 | [EMAIL PROTECTED] * Fortune: The whole world is a scab. The point is to pick it constructively. -- Peter Beard
Re: [expert] libpng error: Call to NULL read function
On Sat, 17 Mar 2001, Erik Gnther wrote: I did some search on the internet (deja, google, altavisa) and no hits! Are I the first person in the world that hit this problem? The line 'Call to NULL read function' did I found i one of the sorcefiles to libpng. Hi I'm having som truble with libpng. I have installed nautilus 1.0 but can't run it because it says: $ nautilus libpng error: Call to NULL read function Segmentation fault This problem is not only for nautilus I have som other programs that says the same error message and dies. So what is the problem? and how do I fix it? I started with LM7.2 and installed the packege found on rpmfind.net for Mandrake Cooker when thay wasn't compiled for GLIB2_2. Those package did I compiled my self (rpm --rebuild). -- /EgU * Erik (EgU) Gnther can be found at: Netch Technologies AB | www.ludat.lth.se/~dat94egu +46 (0)46 - 272 46 35 | [EMAIL PROTECTED] * Fortune: If you learn one useless thing every day, in a single year you'll learn 365 useless things.
[expert] libpng error: Call to NULL read function
Hi I'm having som truble with libpng. I have installed nautilus 1.0 but can't run it because it says: $ nautilus libpng error: Call to NULL read function Segmentation fault This problem is not only for nautilus I have som other programs that says the same error message and dies. So what is the problem? and how do I fix it? I started with LM7.2 and installed the packege found on rpmfind.net for Mandrake Cooker when thay wasn't compiled for GLIB2_2. Those package did I compiled my self (rpm --rebuild). -- /EgU * Erik (EgU) Gnther can be found at: Netch Technologies AB | www.ludat.lth.se/~dat94egu +46 (0)46 - 272 46 35 | [EMAIL PROTECTED] * Fortune: In the days when Sussman was a novice Minsky once came to him as he sat hacking at the PDP-6. "What are you doing?", asked Minsky. "I am training a randomly wired neural net to play Tic-Tac-Toe." "Why is the net wired randomly?", inquired Minsky. "I do not want it to have any preconceptions of how to play". At this Minsky shut his eyes, and Sussman asked his teacher "Why do you close your eyes?" "So that the room will be empty." At that momment, Sussman was enlightened.
[expert] aurora doesn't remont / rw
Hi I have a SMP mashine (P3 800) that crached last night and started to reboot. But for some unknown reason (for me anyway) aurora didn't remount the rootpartision rw and ofcause faild to start and faild to start any other program. Why dosen't aurora try to remonte root-partions? and what do I do about it? The reason that my mashine vrached is probobly that I tried the new NVIDIA driver (0.9-767). The mashine do boot in "failesafe"-mode bat ofcause in singel-CPU mode. But the aurora isn't used in "failsafe"-mode. -- /EgU * Erik (EgU) Gnther can be found at: Netch Technologies AB | www.ludat.lth.se/~dat94egu +46 (0)46 - 272 46 92 | [EMAIL PROTECTED] * Fortune: On the eighth day, God created FORTRAN.
