[expert] Rebuild kernel error
Hello:
I'm trying to make:
rpm -rebuild -target athlon kernel-2.4.18.6mdk-1-1mdk.src.rpm
but I get this error messages:
/usr/bin/gcc -D__KERNEL__ -I/usr/src/RPM/BUILD/linux/include -Wall
-Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common
-fomit-frame-pointer -pipe -mpreferred-stack-boundary=2 -march=athlon
-Os -falign-functions=4 -DMODULE -nostdinc -I
/usr/lib/gcc-lib/i586-mandrake-linux-gnu/3.1/include -I..
-funsigned-char -DKBUILD_BASENAME=xfs_super -c -o xfs_super.o
xfs_super.c
{standard input}: Assembler messages:
{standard input}:1162: Error: suffix or operands invalid for `bsf'
make[3]: *** [xfs_super.o] Error 1
make[3]: Leaving directory `/usr/src/RPM/BUILD/linux/fs/xfs/linux'
make[2]: *** [_modsubdir_linux] Error 2
make[2]: Leaving directory `/usr/src/RPM/BUILD/linux/fs/xfs'
make[1]: *** [_modsubdir_xfs] Error 2
make[1]: Leaving directory `/usr/src/RPM/BUILD/linux/fs'
make: *** [_mod_fs] Error 2
error: Bad exit status from /var/tmp/rpm-tmp.86578 (%build)
RPM build errors:
Bad exit status from /var/tmp/rpm-tmp.86578 (%build)
I can't figure out what's going wrong here so, please, can someone give
me any idea.
P.D.: System is Mandrake 8.2.
Fedneg
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
[expert] Abiword MDK-8.2
Hello: I can't find Abiword in MDK-8.2 download version. I've tried to install latest cooker *.src.rpm but compilation gives me errors. Finally, I tried to install the rpm binaries from the project home page. Again got errors: libpng.so.2 is needed. Has someone got installed the latest version of Abiword in MDK-8.2? Fedneg Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] firewall security
I am using bastille-firewall Scanned my computer in sygatetechcom as you suggest and all UDP ports are closed I configured it with InteractiveBastille -x I don't enter anything for UDP service names or port numbers to allow on public interfaces and let UDP services to block as default (ie 2049 6770) Regards Fedneg Want to buy your Pack or Services from MandrakeSoft? Go to http://wwwmandrakestorecom
[expert] Weel USB Mouse and Nautilus
Hello: I'm using Mandrake 8.1 in an Athlon box with optical Logitech iFeel Mouse (USB). The weel mouse works OK in ALL applications but Nautilus. I did not care very much for a long but yesterday give a try to Mandrake 8.2 beta2, and found the same problem. As I don't have this problem with my Woody instalation I am wondering what's wrong in my Mandrake instalations. I send you my XF86Config-4 file, if it may help. Thank you in advance. Fedneg # File generated by XFdrake. # ** # Refer to the XF86Config(4/5) man page for details about the format of # this file. # ** Section Files RgbPath /usr/X11R6/lib/X11/rgb # Multiple FontPath entries are allowed (they are concatenated together) # By default, Mandrake 6.0 and later now use a font server independent of # the X server to render fonts. FontPath unix/:7100 EndSection # ** # Server flags section. # ** Section ServerFlags # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging #NoTrapSignals # Uncomment this to disable the CrtlAltBS server abort sequence # This allows clients to receive this key event. #DontZap # Uncomment this to disable the CrtlAltKP_+/KP_- mode switching # sequences. This allows clients to receive these key events. #DontZoom # This allows the server to start up even if the # mouse device can't be opened/initialised. AllowMouseOpenFail EndSection # ** # Input devices # ** # ** # Keyboard section # ** Section InputDevice Identifier Keyboard1 Driver Keyboard Option AutoRepeat 250 30 Option XkbRules xfree86 Option XkbModel pc105 Option XkbLayout es EndSection # ** # Pointer section # ** Section InputDevice Identifier Mouse1 Driver mouse Option ProtocolIMPS/2 Option Device /dev/usbmouse Option ZAxisMapping 4 5 Option Emulate3Buttons no #Option Emulate3Timeout50 # ChordMiddle is an option for some 3-button Logitech mice #Option ChordMiddle EndSection Section Module # This loads the DBE extension module. Loaddbe # This loads the miscellaneous extensions module, and disables # initialisation of the XFree86-DGA extension within that module. SubSection extmod #Option omit xfree86-dga EndSubSection # This loads the Type1 and FreeType font modules Loadtype1 Loadfreetype EndSection # ** # Monitor section # ** # Any number of monitor sections may be present Section Monitor Identifier monitor1 VendorName Unknown ModelName Unknown # HorizSync is in kHz unless units are specified. # HorizSync may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. HorizSync 30-70 # VertRefresh is in Hz unless units are specified. # VertRefresh may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. VertRefresh 50-160 # This is a set of extended mode timings typically used for laptop, # TV fullscreen mode or DVD fullscreen output. # These are available along with standard mode timings. # Sony Vaio C1(X,XS,VE,VN)? # 1024x480 @ 85.6 Hz, 48 kHz hsync ModeLine 1024x48065.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync # 768x576 @ 79 Hz, 50 kHz hsync ModeLine 768x576 50.00 768 832 846 1000 576 590 595 630 # 768x576 @ 100 Hz, 61.6 kHz hsync ModeLine 768x576 63.07 768 800 960 1024 576 578 590 616 EndSection # ** # Graphics device section # ** Section Device Identifier Generic VGA Driver vga EndSection Section Device Identifier
Re: [expert] SSH
Where is the Mac client for TighVNC? I just can find the UNIX, Windows and java ones. On Mon, 2002-01-21 at 16:57, James Sparenberg wrote: Having used VNC almost daily for a year I can offer the following. TightVNC is the least bandwidth intensive. Available at tightvnc.com There are clients for Windows, Linux, (linux builds on FreeBSD) and Mac. Viewing Linux on windows is better than the other way around. Since Windows doesn't multitask everyone winds up with the same desktop, and you tend to crash windows (what a suprise) fairly easy. However if you are on windows and viewing linux it rocks. It's useable down to a 56k connection but it feels a lot like a 486 at 56k. Use a window manager like ice or fvvm for the best results. KDE and Gnome are tooo graphicaly intesive for remote viewing. However the apps from kde and gnome work well under ice or fvvm. If you go regular VNC they even have a client for CE. It works as a viewer but its not the fastest thing in the world. James On Mon, 21 Jan 2002 01:07:09 -0700 Vincent Danen [EMAIL PROTECTED] wrote: On Fri Jan 18, 2002 at 09:20:28PM -0700, Lee Roberts wrote: I'm trying to figure out how to make that work with my Win2K machine. I'm using ttsh on the Win2K PC to establish an SSH connection with the Linux machine. There's an option in ttssh for running remote X apps on the local X server but there doesn't appear to be a listing for an X server in the Win2K services. I suppose that there is an X app for Win2K somewhere? You need to be running an X server on your Windows machine and no, Win2k does not come with one. There are some commercial X servers for Windows, but I can't really remember which are good and which aren't... it's been a while since I looked (probably over a year). When I last did, there were no free X servers for Windows. What you probably need is to setup VNC... I know that you can get Windows showing up on your Linux box this way, but not sure about vice versa (I think it will work... I remember turning on and off the wife's xmms when I played with it before, but whether I was on the Windows machine or my Linux machine I don't recall). FYI (and this is more for others reading as I don't think this matters much to you in particular), I just got an X server running on MacOS/X... now all I need is to find an ssh client for MacOS/X and I can run xchat on it by tunneling it from my Linux box (wOOp!). -- MandrakeSoft Security, OpenPGP key available on www.keyserver.net 1024D/FE6F2AFD 88D8 0D23 8D4B 3407 5BD7 66F9 2043 D0E5 FE6F 2AFD Current Linux kernel 2.4.8-34.1mdk uptime: 9 days 11 hours 43 minutes. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Remote Gnome app error
Hello: I'm trying to run gnome applications from a remote host but get this error: GnomeUI-WARNING **: While connecting to session manager: Authentication Rejected, reason : None of the authentication protocols specified are supported and host-based authentication failed. I only get this error from gnome app., no problem with kde or other X applications. Server system is running Mandrake 8.1. May be is a gnome specific problem? Any suggestion? Fedneg Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Netatalk questions
Hello: I've been using Netatalk in my Mandrake box for a few months and now a few questions has arisen to me. *First: I want to access my netatalk server from outside my local network. The problem is that I'm using the interactive Bastille Firewall where i have enabled port 548 (afpovertcp). This let me see the server but don't let me log-on. Of course when i shutdown Bastille-Firewall everything works fine. Do i need to enable any other port? *Second: And more generic one. The netatalk service uses plain text for authentification, so is there any possibility to increase security? Maybe SSH? I could not find anything. Merry Christmas Fedneg Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] How to test the performance of a Video Card
On Wed, 2001-12-19 at 02:49, jose orlando t. ribeiro wrote: if it is a open-gl capable card, try gears at the prompt level, it returns a mark in fps. or try a timedemo at quake arena :-) Stephen Liu wrote: Hi All People, Kindly advise : How to test the performance of a Video Card Thanks in advance. B.R. Stephen Liu Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Is it possible to test 3D performance in a similar way? Fedneg Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
RE: [expert] System freezes when copying in second ide channel
On Sun, 2001-12-16 at 22:46, Jose M. Sanchez wrote: WOW is your system misconfigured Who set it up!!! It's exactly as I noted in my original message... They put one hard drive on each IDE channel and a CD/DVD on the same channel... Your drives are also mismatched, you are using a UDMA 66 and UDMA 33 drive in the same machine... Not good (Civilme went into the reasons for this a while ago... ) A BIG NO-NO! No wonder you are having problems! Your system: hda: ST320420A, ATA DISK drive hdb: 10X8X32, ATAPI CD/DVD-ROM drive hdc: SAMSUNG SV0844D, ATA DISK drive hdd: SAMSUNG DVD-ROM SD-606F, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 What it should be hda: ST320420A, ATA DISK drive hdb: SAMSUNG SV0844D, ATA DISK drive hdc: 10X8X32, ATAPI CD/DVD-ROM drive hdd: SAMSUNG DVD-ROM SD-606F, ATAPI CD/DVD-ROM drive You should also step BOTH drives down to UDMA 33 in the bios to avoid problems. You must always go by the lowest denominator on an IDE channel. It may be that the newer kernel is far more conservative with the IDE devices which is why it seems more stable. I would not trust this though and fix the problem and re-install Linux... -JMS -Original Message- From: Guillermo [mailto:[EMAIL PROTECTED]] Sent: Sunday, December 16, 2001 1:03 PM To: [EMAIL PROTECTED] Subject: RE: [expert] System freezes when copying in second ide channel On Sun, 2001-12-16 at 06:17, Jose M. Sanchez wrote: What devices do you have attached to each channel and at what speed(s)? Mis-matched hard drives will also cause this problem... I.E. if you have two drives, put them both on the first IDE channel, and make sure that they are from the same manufacturer and preferably fairly close in model/makes. (This is not a hard and fast rule though...) Try to avoid placing a third drive on the same IDE channel as a CD-ROM/DVD/CD-RW device. If you MUST do so, step the UDMA rate of the drive down to 33 in the bios and change the CD-ROM/DVD/CD-RW device to PIO instead of DMA... If the second IDE channel is UDMA 66 or 100 capable, are you using the high density IDE cables on both channels? Not the usual ones supplied with CD-ROM's, motherboards? Thank you very much for your valuable comments Jose. I'm going to reinstall all my system righ now. Fedneg Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
RE: [expert] System freezes when copying in second ide channel
On Sun, 2001-12-16 at 06:17, Jose M. Sanchez wrote: What devices do you have attached to each channel and at what speed(s)? Also do you have an NVIDIA or 3DFX video card on your system and/or a SBLIVE card? There were some problems vis-à-vis the SBLive and the VIA chipset. Improper motherboard voltage/AGP jumpers also will cause system freezing during high DMA xfers with Nvidia, 3DFX and a few other video adaptors. Mis-matched hard drives will also cause this problem... I.E. if you have two drives, put them both on the first IDE channel, and make sure that they are from the same manufacturer and preferably fairly close in model/makes. (This is not a hard and fast rule though...) Try to avoid placing a third drive on the same IDE channel as a CD-ROM/DVD/CD-RW device. If you MUST do so, step the UDMA rate of the drive down to 33 in the bios and change the CD-ROM/DVD/CD-RW device to PIO instead of DMA... If the second IDE channel is UDMA 66 or 100 capable, are you using the high density IDE cables on both channels? Not the usual ones supplied with CD-ROM's, motherboards? -JMS -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Fedneg Sent: Wednesday, December 12, 2001 10:20 AM To: [EMAIL PROTECTED] Subject: [expert] System freezes when copying in second ide channel Hello: I've problems performing copies from first IDE channel to second one. After a few files copied the system freezes. I wonder if someone else has found similar problems because i cannot find any configuration error in the hardware. The box is an AMD Athlon 1.2 build with a Soltek mainboard (VIA Apollo KT266 series, South Bridge VT8233, North Bridge VT8366). I've enable DMA in both disks; and the filesystem is reiserfs. Any comment will be wellcome. Thank you. Fedneg Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com I've pasted at the boton information of my system extracted with dmesg. The video card is ATI Expert98 (mach64). There is no pci sound (I use the onboard VIA8233 AC97 with Alsa packages). I've tried also search the log messages for any error ( as Jose Orlando suggested) with no luck. Finaly I tested the 2.2.20 kernel with ext2 and the system seems stable as a rock, so the problem is with 2.4.x kernels and ext3 or reiserfs. Regards Fedneg Kernel command line: auto BOOT_IMAGE=linux-2.4.16-5g ro root=305 hdb=ide-scsi hdd=ide-scsi devfs=mount ide_setup: hdb=ide-scsi ide_setup: hdd=ide-scsi Initializing CPU#0 Detected 1214.458 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 2424.83 BogoMIPS Memory: 513708k/524224k available (1120k kernel code, 10132k reserved, 299k data, 224k init, 0k highmem) Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Before vendor init, caps: 0183f9ff c1c7f9ff , vendor = 2 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After vendor init, caps: 0183f9ff c1c7f9ff CPU: After generic, caps: 0183f9ff c1c7f9ff CPU: Common caps: 0183f9ff c1c7f9ff CPU: AMD Athlon(tm) processor stepping 02 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED]) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfb260, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 2: assuming transparent PCI: Using IRQ router default [1106/3099] at 00:00.0 isapnp: Scanning for PnP cards... isapnp: No Plug Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x07 (Driver version 1.15) Starting kswapd VFS: Diskquotas version dquot_6.4.0 initialized devfs: v0.120 (20011103) Richard Gooch ([EMAIL PROTECTED]) devfs: boot_options: 0x1 vesafb: framebuffer at 0xe400, mapped to 0xe080, size 8192k vesafb: mode is 1280x1024x16, linelength=2560, pages=2 vesafb: protected mode interface info at c000:4785 vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 160x64 fb0: VESA VGA frame buffer device Detected PS/2 Mouse Port. pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS
Re: [expert] System freezes when copying in second ide channel
On Fri, 2001-12-14 at 02:45, jose orlando t. ribeiro wrote: Are you using a Western Digital HD??? If you are... sorry... welcome to the club... WD are prone to give trouble when used with other IDE devices... Fedneg wrote: Hello: I've problems performing copies from first IDE channel to second one. After a few files copied the system freezes. I wonder if someone else has found similar problems because i cannot find any configuration error in the hardware. The box is an AMD Athlon 1.2 build with a Soltek mainboard (VIA Apollo KT266 series, South Bridge VT8233, North Bridge VT8366). I've enable DMA in both disks; and the filesystem is reiserfs. Any comment will be wellcome. Thank you. Fedneg Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Firts harddisk is: Samsung SV0844D, and the second: Seagate ST320420A. Thanks. Fedneg Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] System freezes when copying in second ide channel
Hello: I've problems performing copies from first IDE channel to second one. After a few files copied the system freezes. I wonder if someone else has found similar problems because i cannot find any configuration error in the hardware. The box is an AMD Athlon 1.2 build with a Soltek mainboard (VIA Apollo KT266 series, South Bridge VT8233, North Bridge VT8366). I've enable DMA in both disks; and the filesystem is reiserfs. Any comment will be wellcome. Thank you. Fedneg Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] System freezes when using second ide channel
Hello: I've problems performing massive copies from first IDE channel to second one. After a few files copied the system freezes. I wonder if someone else has found similar problems because i cannot find any configuration error in the hardware. The box is build with a Soltek mainboard (VIA Apollo KT266 series, South Bridge VT8233, North Bridge VT8366). I've enable DMA in both disks; and the file system is reiserfs. Any comment will be wellcome. Thank you. Fedneg Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] System freezes when copying in second ide channel
Hello: I've problems performing copies from first IDE channel to second one. After a few files copied the system freezes. I wonder if someone else has found similar problems because i cannot find any configuration error in the hardware. The box is an AMD Athlon 1.2 build with a Soltek mainboard (VIA Apollo KT266 series, South Bridge VT8233, North Bridge VT8366). I've enable DMA in both disks; and the filesystem is reiserfs. Any comment will be wellcome. Thank you. Fedneg Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] RPM rebuild question
Hi, I'm trying to rebuild some source RPMs for my athlon box but I have some problems with option --target=. I've also found that when I type: rpm -rebuild --target=i686 filename.rpm the result is: --target=i686: unknown option Can someone help? Thanks in advance. Fedneg Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] RPM rebuild question
On Sun, 25 Nov 2001 10:08:05 -0800 (PST) SI Reasoning [EMAIL PROTECTED] wrote: If you are rebuilding on the athlon box, then you don't need to use --target= as it will automatically determine that. First, thanks for your answer. A new question comes to me: what happens if you want to rebuild for i386? Is it possible in Mandrake 8.1. Fedneg Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] ide cd burner
I've a 2nd CDROM how can I make both SCSI emulated? Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Supermount
Hello: I've compiled new kernel 2.4.6 in my MD 8.0 frequently #2, and now I've lost supermount with all kernels (included 2.4.5-mdk). I used supermount -i enable but I can't get it back. Any help? PS: Someone knows where can I get supermount patch for 2.4.6 kernel. Thanks for your information. Fedneg
Re: [expert] Supermount
Hoyt wrote: On Saturday 07 July 2001 11:52 am, you methodically organized electrons to state: Hello:I've compiled new kernel 2.4.6 in my MD 8.0 frequently #2, and nowI've lost supermount with all kernels (included 2.4.5-mdk). I used"supermount -i enable"but I can't get it back.Any help? Did you choose to enable it in the config file? PS: Someone knows where can I get supermount patch for 2.4.6 kernel. http://www.geocities.com/alexismikhailov/supermount.htmlfound by searching for it at freshmeat.netHoyt My problem is that after instaling the kernel compided by myself (as I downloaded it from kernel.org, with no patch) I've lost supermount to work with precompiled kernels also. PS: When I apply Supermount 0.5.3-2.4.0-diff to kernel-2.4.6 I get a lot of errors, my be this pacth only works with 2.4.0 kernel? Fedneg
Re: [expert] 3 Hard-drive problems
On Saturday 16 June 2001 07:23, Jesper Holmberg wrote: Below follow three problems I've had since I installed Mdk8. Sorry to post them all in the same message, but I don't know whether or not they are related. What I did during the installation was to change (all partitions but one) to ReiserFS. But I did no repartitioning, just changed the FS from Ext2. 1. The harddrive is very slow, compared to before. A rough estimate is 3-5 times slower when reading from disk. This is also true on fairly small files, which I expected to benefit from using ReiserFS. 2. Using hdparm on the drive has no perceptible change whatsoever. I have fiddled with all the ususal settings to improve my disappointing performance, but with no effect. Doesn't hdparm work with Reiserfs? 3. The size of one of the partitions is incorrectly estimated by df. df says this: used: /dev/hda6 126M 80M 46M 64% /home but du -sh /home says this: 52M /home There seems to be about 30M missing, and this has been th case since installing. Could someone help me shed some light on these issues? TIA Jesper p.s. Here follows my /etc/fstab, if useful: /dev/hda8 / reiserfs defaults 1 1 /dev/hda5 /boot ext2 noatime 1 2 none /dev/pts devpts mode=0620 0 0 /dev/hda6 /home reiserfs defaults 1 2 /mnt/cdrom /mnt/cdrom supermount fs=iso9660,dev=/dev/cdrom 0 0 /mnt/floppy /mnt/floppy supermount fs=vfat,dev=/dev/fd0 0 0 /dev/hda1 /mnt/windows vfat user,exec,umask=0,codepage=850,iocharset=iso8859-1 0 0 none /proc proc defaults 0 0 /dev/hda7 swap swap defaults 0 0 Well, this is what I've done: Installed MD 7.2 with Reiser (with my motherboaard, Soltek SL-75DRV, the MD 8.0 with ext2 the XWindows simply don't start after install). With 7.2 everything works really fine. Upgrate to 8.0 and use old kernel. Here you have MD 8.0, Reiser, and UDMA. (cdrecord do not work with old kernels) Fedneg
