RE: [expert] cdr writing
I tried KISOcd last night (for kicks), it does the same thing 5 megs into a cdr, and fail. I can use any program to burn a successful cdRW however. Brian -Original Message- From: Anthony Russello [mailto:[EMAIL PROTECTED]] Sent: Tuesday, November 14, 2000 5:56 PM To: [EMAIL PROTECTED] Subject: Re: [expert] cdr writing Try using kisocd. I haven't written a single coasterwith it since I started. It'sjust a front end for cdrecord, but it's a decent one. On Mon, 13 Nov 2000, Tom Berkley wrote: Date: Mon, 13 Nov 2000 20:53:14 -0800 From: Tom Berkley [EMAIL PROTECTED] Reply-To: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: Re: [expert] cdr writing The recommendation to use cdrecord from the command line is a very good one to try. xcdroast made a lot of coasters for me when I started to burn cd's in linux but when I went to cdrecord from the command line, I got clean fast burns (10 minutes for a full cd at 8x on my plextor scsi cdr). cdrecord has never given me a coaster. Tom Berkley "Joseph S. Gardner" wrote: Klar Brian D Contr MSG/SWS wrote: My fault, I thought I put it in there, I only have the one cdrom drive, and I do make image files to the hd. Thought it doesnt matter. If I try to dup a CD or try to move files from hd to cd. Same result. Brian -Original Message- From: Scott Tyson [mailto:[EMAIL PROTECTED]] You might be getting buffer underruns. I haven't seen one of these with Xcdroast so I'm not sure what it spits back when it deos hit one. Try putting the cd contents to Disc then burning from there. When I do cd-cd copies under Windows I have to do this or I get underruns. *** REPLY SEPARATOR *** On 11/13/2000 at 2:54 PM Klar Brian D Contr MSG/SWS scribbled: I am having real problems trying to burn a CD-R. No matter what program I use, or what account I am under (i.e. root, or other users). When I try to either copy a CD, or make a DATA CD, 5 Megs into it I get a failure, medium error. I can burn a CD-RW with no problems though. I find it hard to believe that I am getting the bad one of the stack in Linux, when win will burn every CD correctly, instead of a coaster. Here is the output of cdrecord on one try. I think I was using Xcdroast here. pregap1: -1 Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling TOC Type: 1 = CD-ROM scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 2.1.39 Using libscg version 'schily-0.1' atapi: 1 Device type: Removable CD-ROM Version: 0 Response Format: 1 Vendor_info: 'SONY' Identifikation : 'CD-RW CRX100E ' Revision : '1.0j' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO Drive buf size : 1040128 = 1015 KB FIFO size : 4194304 = 4096 KB Track 01: data 500 MB Total size: 575 MB (56:59.94) = 256496 sectors Lout start: 575 MB (57:01/71) = 256496 sectors Current Secsize: 2048 ATIP start of lead in: -11640 (97:26/60) ATIP start of lead out: 359849 (79:59/74) Disk type:Long strategy type (Cyanine, AZO or similar) Manuf. index: 3 Manufacturer: CMC Magnetics Corporation Blocks total: 359849 Blocks current: 359849 Blocks remaining: 103353 Starting to write CD/DVD at speed 2 in write mode for single session. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... Sending CUE sheet... cdrecord: WARNING: Drive returns wrong startsec (0) using -150 Writing pregap for track 1 at -150 Starting new track at sector: 0 CDB: 2A 00 00 00 0D CE 00 00 1F 00 cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error Sense Bytes: 70 00 03 00 00 00 00 12 00 00 00 00 0C 09 00 00 status: 0x2 (CHECK CONDITION) Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x0C Qual 0x09 (write error - loss of streaming) Fru 0x0 Sense flags: Blk 0 (not valid) write track data: error after 7237632 bytes Sense Bytes: 70 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00 Writing time: 113.651s Fixating... Fixating time:0.004s Any help would be appreciated since I only use windows right now for scanning since I can not find support for my parallel scanner. Not a big issue right now either since I put the scanner on my gf's machine. I can burn a CD-RW with any program I wish to use. System is PII-450 128M RAM Sony CRX-100E internal IDE KDE2 as my environment I have tried to copy both a previously burned cd, and an original manufactured CD. When I burn a CD, that is all I do, I don't try to run other apps nor do I surf. So I have ruled out CPU process problems. HELP!!! Brian D. Klar - CVE
Re: [expert] cdr writing
I've experienced the same error message from cdrecord both via GUI progs and the command line. What has me perplexed is that the same burner worked perfectly under 7.1 and is now unable to even burner a CD-RW without the same error as a CD-R. Something has changed between versions and it's got me stuffed how to fix it. My burner is a LG CED-8080B which I allowed both versions of Mandrake to set up during installation. It's IDE using ide-scsi emulation. It is spec'ed at writing 8xCD-R, 4xCD-RW reading 32xMax. Under 7.1 I had perfect results using gcombust for both data and audio CD burning. Perhaps one of the kernel gurus might be able to help. On Tue, 14 Nov 2000 12:53, Tom Berkley wrote: The recommendation to use cdrecord from the command line is a very good one to try. xcdroast made a lot of coasters for me when I started to burn cd's in linux but when I went to cdrecord from the command line, I got clean fast burns (10 minutes for a full cd at 8x on my plextor scsi cdr). cdrecord has never given me a coaster. Tom Berkley snipped DATA CD, 5 Megs into it I get a failure, medium error. I can burn a CD-RW with no problems though. I find it hard to believe that I am getting the bad one of the stack in Linux, when win will burn every CD correctly, instead of a coaster. Here is the output of cdrecord on one try. I think I was using Xcdroast here. pregap1: -1 Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling TOC Type: 1 = CD-ROM scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 2.1.39 Using libscg version 'schily-0.1' atapi: 1 Device type: Removable CD-ROM Version: 0 Response Format: 1 Vendor_info: 'SONY' Identifikation : 'CD-RW CRX100E ' Revision : '1.0j' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO Drive buf size : 1040128 = 1015 KB FIFO size : 4194304 = 4096 KB Track 01: data 500 MB Total size: 575 MB (56:59.94) = 256496 sectors Lout start: 575 MB (57:01/71) = 256496 sectors Current Secsize: 2048 ATIP start of lead in: -11640 (97:26/60) ATIP start of lead out: 359849 (79:59/74) Disk type:Long strategy type (Cyanine, AZO or similar) Manuf. index: 3 Manufacturer: CMC Magnetics Corporation Blocks total: 359849 Blocks current: 359849 Blocks remaining: 103353 Starting to write CD/DVD at speed 2 in write mode for single session. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... Sending CUE sheet... cdrecord: WARNING: Drive returns wrong startsec (0) using -150 Writing pregap for track 1 at -150 Starting new track at sector: 0 CDB: 2A 00 00 00 0D CE 00 00 1F 00 cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error Sense Bytes: 70 00 03 00 00 00 00 12 00 00 00 00 0C 09 00 00 status: 0x2 (CHECK CONDITION) I'm not getting the following error * Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x0C Qual 0x09 (write error - loss of streaming) Fru 0x0 Sense flags: Blk 0 (not valid) write track data: error after 7237632 bytes Sense Bytes: 70 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00 Writing time: 113.651s Fixating... Fixating time:0.004s snipped I can burn a CD-RW with any program I wish to use. System is PII-450 128M RAM Sony CRX-100E internal IDE KDE2 as my environment I have tried to copy both a previously burned cd, and an original manufactured CD. When I burn a CD, that is all I do, I don't try to run other apps nor do I surf. So I have ruled out CPU process problems. HELP!!! Brian D. Klar - CVE -- CYA, Muzza. Mandrake Linux 7.2 Current Linux uptime: 1 day 2 hours 44 minutes. Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.
RE: [expert] cdr writing
No, I have not tried command line burning. I will attempt that this even- ing. The CD-RW is a Sony 24x4x2 (cd, cdr, cdrw) I burn all at 2x to ensure no problems with data write errors, and this used to work flaw lessly in 7.1 and older.. Brian -Original Message- From: Joseph S. Gardner [mailto:[EMAIL PROTECTED]] Sent: Monday, November 13, 2000 4:05 PM To: [EMAIL PROTECTED] Subject: Re: [expert] cdr writing Klar Brian D Contr MSG/SWS wrote: My fault, I thought I put it in there, I only have the one cdrom drive, and I do make image files to the hd. Thought it doesnt matter. If I try to dup a CD or try to move files from hd to cd. Same result. Brian -Original Message- From: Scott Tyson [mailto:[EMAIL PROTECTED]] You might be getting buffer underruns. I haven't seen one of these with Xcdroast so I'm not sure what it spits back when it deos hit one. Try putting the cd contents to Disc then burning from there. When I do cd-cd copies under Windows I have to do this or I get underruns. *** REPLY SEPARATOR *** On 11/13/2000 at 2:54 PM Klar Brian D Contr MSG/SWS scribbled: I am having real problems trying to burn a CD-R. No matter what program I use, or what account I am under (i.e. root, or other users). When I try to either copy a CD, or make a DATA CD, 5 Megs into it I get a failure, medium error. I can burn a CD-RW with no problems though. I find it hard to believe that I am getting the bad one of the stack in Linux, when win will burn every CD correctly, instead of a coaster. Here is the output of cdrecord on one try. I think I was using Xcdroast here. pregap1: -1 Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling TOC Type: 1 = CD-ROM scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 2.1.39 Using libscg version 'schily-0.1' atapi: 1 Device type: Removable CD-ROM Version: 0 Response Format: 1 Vendor_info: 'SONY' Identifikation : 'CD-RW CRX100E ' Revision : '1.0j' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO Drive buf size : 1040128 = 1015 KB FIFO size : 4194304 = 4096 KB Track 01: data 500 MB Total size: 575 MB (56:59.94) = 256496 sectors Lout start: 575 MB (57:01/71) = 256496 sectors Current Secsize: 2048 ATIP start of lead in: -11640 (97:26/60) ATIP start of lead out: 359849 (79:59/74) Disk type:Long strategy type (Cyanine, AZO or similar) Manuf. index: 3 Manufacturer: CMC Magnetics Corporation Blocks total: 359849 Blocks current: 359849 Blocks remaining: 103353 Starting to write CD/DVD at speed 2 in write mode for single session. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... Sending CUE sheet... cdrecord: WARNING: Drive returns wrong startsec (0) using -150 Writing pregap for track 1 at -150 Starting new track at sector: 0 CDB: 2A 00 00 00 0D CE 00 00 1F 00 cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error Sense Bytes: 70 00 03 00 00 00 00 12 00 00 00 00 0C 09 00 00 status: 0x2 (CHECK CONDITION) Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x0C Qual 0x09 (write error - loss of streaming) Fru 0x0 Sense flags: Blk 0 (not valid) write track data: error after 7237632 bytes Sense Bytes: 70 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00 Writing time: 113.651s Fixating... Fixating time:0.004s Any help would be appreciated since I only use windows right now for scanning since I can not find support for my parallel scanner. Not a big issue right now either since I put the scanner on my gf's machine. I can burn a CD-RW with any program I wish to use. System is PII-450 128M RAM Sony CRX-100E internal IDE KDE2 as my environment I have tried to copy both a previously burned cd, and an original manufactured CD. When I burn a CD, that is all I do, I don't try to run other apps nor do I surf. So I have ruled out CPU process problems. HELP!!! Brian D. Klar - CVE have you tried a running cdrecord from a command line? I had to resort to using a command line as I could not get any of the gui versions to work. Also what is the make and speed of your CD-RW? I found that even though my CD-RW was supposed to write at 10X that most cd's whilst being certified to 12X skip the 10X speed for some reason or another (ie. 1X,2X,4X,6X,8X,12X) . -- Joseph S Gardner Senior Designer / Technical Support Kirby Co., Cleveland, OH [EMAIL PROTECTED] The box said, "Requires Windows 3.x or better", so I got Linux. Registered Linux user #1696600 Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.
RE: [expert] cdr writing
I will try, just seems a bit odd that the output I posted is cdrecord's output from within one of the gui programs I tried. -Original Message- From: Tom Berkley [mailto:[EMAIL PROTECTED]] Sent: Monday, November 13, 2000 11:53 PM To: [EMAIL PROTECTED] Subject: Re: [expert] cdr writing The recommendation to use cdrecord from the command line is a very good one to try. xcdroast made a lot of coasters for me when I started to burn cd's in linux but when I went to cdrecord from the command line, I got clean fast burns (10 minutes for a full cd at 8x on my plextor scsi cdr). cdrecord has never given me a coaster. Tom Berkley "Joseph S. Gardner" wrote: Klar Brian D Contr MSG/SWS wrote: My fault, I thought I put it in there, I only have the one cdrom drive, and I do make image files to the hd. Thought it doesnt matter. If I try to dup a CD or try to move files from hd to cd. Same result. Brian -Original Message- From: Scott Tyson [mailto:[EMAIL PROTECTED]] You might be getting buffer underruns. I haven't seen one of these with Xcdroast so I'm not sure what it spits back when it deos hit one. Try putting the cd contents to Disc then burning from there. When I do cd-cd copies under Windows I have to do this or I get underruns. *** REPLY SEPARATOR *** On 11/13/2000 at 2:54 PM Klar Brian D Contr MSG/SWS scribbled: I am having real problems trying to burn a CD-R. No matter what program I use, or what account I am under (i.e. root, or other users). When I try to either copy a CD, or make a DATA CD, 5 Megs into it I get a failure, medium error. I can burn a CD-RW with no problems though. I find it hard to believe that I am getting the bad one of the stack in Linux, when win will burn every CD correctly, instead of a coaster. Here is the output of cdrecord on one try. I think I was using Xcdroast here. pregap1: -1 Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling TOC Type: 1 = CD-ROM scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 2.1.39 Using libscg version 'schily-0.1' atapi: 1 Device type: Removable CD-ROM Version: 0 Response Format: 1 Vendor_info: 'SONY' Identifikation : 'CD-RW CRX100E ' Revision : '1.0j' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO Drive buf size : 1040128 = 1015 KB FIFO size : 4194304 = 4096 KB Track 01: data 500 MB Total size: 575 MB (56:59.94) = 256496 sectors Lout start: 575 MB (57:01/71) = 256496 sectors Current Secsize: 2048 ATIP start of lead in: -11640 (97:26/60) ATIP start of lead out: 359849 (79:59/74) Disk type:Long strategy type (Cyanine, AZO or similar) Manuf. index: 3 Manufacturer: CMC Magnetics Corporation Blocks total: 359849 Blocks current: 359849 Blocks remaining: 103353 Starting to write CD/DVD at speed 2 in write mode for single session. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... Sending CUE sheet... cdrecord: WARNING: Drive returns wrong startsec (0) using -150 Writing pregap for track 1 at -150 Starting new track at sector: 0 CDB: 2A 00 00 00 0D CE 00 00 1F 00 cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error Sense Bytes: 70 00 03 00 00 00 00 12 00 00 00 00 0C 09 00 00 status: 0x2 (CHECK CONDITION) Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x0C Qual 0x09 (write error - loss of streaming) Fru 0x0 Sense flags: Blk 0 (not valid) write track data: error after 7237632 bytes Sense Bytes: 70 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00 Writing time: 113.651s Fixating... Fixating time:0.004s Any help would be appreciated since I only use windows right now for scanning since I can not find support for my parallel scanner. Not a big issue right now either since I put the scanner on my gf's machine. I can burn a CD-RW with any program I wish to use. System is PII-450 128M RAM Sony CRX-100E internal IDE KDE2 as my environment I have tried to copy both a previously burned cd, and an original manufactured CD. When I burn a CD, that is all I do, I don't try to run other apps nor do I surf. So I have ruled out CPU process problems. HELP!!! Brian D. Klar - CVE have you tried a running cdrecord from a command line? I had to resort to using a command line as I could not get any of the gui versions to work. Also what is the make and speed of your CD-RW? I found that even though my CD-RW was supposed to write at 10X that most cd's whilst being certified to 12X skip the 10X speed for some reason or another (ie. 1X,2X,4X,6X,8X,12X) . -- Joseph S Gardner Senior Designer / Technical Support Kirby Co., Cleveland, OH [EMAIL PROTECTED] Th
Re: [expert] cdr writing
I will try, just seems a bit odd that the output I posted is cdrecord's output from within one of the gui programs I tried. cdrecord is the writer app being called by all the shell programs. I believe you said you have a Sony drive. When doing multi-session writes you need to add an extra option to the cdrecord command line to get it to do the writes as a multisession. Can't remember what it is but it's discussed in the man pages. Once you get cdrecord commandline writing functioning you should be able to set up the cdrecord commandline in CDToast the same way. Cheers --- Larry Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.
RE: [expert] cdr writing
On Tue, 14 Nov 2000, Klar Brian D Contr MSG/SWS wrote: all of these gui gtk cd burning software are just frontends to cdrecord and other command line tools like mkisofs, etc. so that would explain why you would get cdrecord output. I will try, just seems a bit odd that the output I posted is cdrecord's output from within one of the gui programs I tried. -Original Message- From: Tom Berkley [mailto:[EMAIL PROTECTED]] Sent: Monday, November 13, 2000 11:53 PM To: [EMAIL PROTECTED] Subject: Re: [expert] cdr writing The recommendation to use cdrecord from the command line is a very good one to try. xcdroast made a lot of coasters for me when I started to burn cd's in linux but when I went to cdrecord from the command line, I got clean fast burns (10 minutes for a full cd at 8x on my plextor scsi cdr). cdrecord has never given me a coaster. Tom Berkley "Joseph S. Gardner" wrote: Klar Brian D Contr MSG/SWS wrote: My fault, I thought I put it in there, I only have the one cdrom drive, and I do make image files to the hd. Thought it doesnt matter. If I try to dup a CD or try to move files from hd to cd. Same result. Brian -Original Message- From: Scott Tyson [mailto:[EMAIL PROTECTED]] You might be getting buffer underruns. I haven't seen one of these with Xcdroast so I'm not sure what it spits back when it deos hit one. Try putting the cd contents to Disc then burning from there. When I do cd-cd copies under Windows I have to do this or I get underruns. *** REPLY SEPARATOR *** On 11/13/2000 at 2:54 PM Klar Brian D Contr MSG/SWS scribbled: I am having real problems trying to burn a CD-R. No matter what program I use, or what account I am under (i.e. root, or other users). When I try to either copy a CD, or make a DATA CD, 5 Megs into it I get a failure, medium error. I can burn a CD-RW with no problems though. I find it hard to believe that I am getting the bad one of the stack in Linux, when win will burn every CD correctly, instead of a coaster. Here is the output of cdrecord on one try. I think I was using Xcdroast here. pregap1: -1 Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling TOC Type: 1 = CD-ROM scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 2.1.39 Using libscg version 'schily-0.1' atapi: 1 Device type: Removable CD-ROM Version: 0 Response Format: 1 Vendor_info: 'SONY' Identifikation : 'CD-RW CRX100E ' Revision : '1.0j' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO Drive buf size : 1040128 = 1015 KB FIFO size : 4194304 = 4096 KB Track 01: data 500 MB Total size: 575 MB (56:59.94) = 256496 sectors Lout start: 575 MB (57:01/71) = 256496 sectors Current Secsize: 2048 ATIP start of lead in: -11640 (97:26/60) ATIP start of lead out: 359849 (79:59/74) Disk type:Long strategy type (Cyanine, AZO or similar) Manuf. index: 3 Manufacturer: CMC Magnetics Corporation Blocks total: 359849 Blocks current: 359849 Blocks remaining: 103353 Starting to write CD/DVD at speed 2 in write mode for single session. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... Sending CUE sheet... cdrecord: WARNING: Drive returns wrong startsec (0) using -150 Writing pregap for track 1 at -150 Starting new track at sector: 0 CDB: 2A 00 00 00 0D CE 00 00 1F 00 cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error Sense Bytes: 70 00 03 00 00 00 00 12 00 00 00 00 0C 09 00 00 status: 0x2 (CHECK CONDITION) Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x0C Qual 0x09 (write error - loss of streaming) Fru 0x0 Sense flags: Blk 0 (not valid) write track data: error after 7237632 bytes Sense Bytes: 70 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00 Writing time: 113.651s Fixating... Fixating time:0.004s Any help would be appreciated since I only use windows right now for scanning since I can not find support for my parallel scanner. Not a big issue right now either since I put the scanner on my gf's machine. I can burn a CD-RW with any program I wish to use. System is PII-450 128M RAM Sony CRX-100E internal IDE KDE2 as my environment I have tried to copy both a previously burned cd, and an original manufactured CD. When I burn a CD, that is all I do, I don't try to run other apps nor do I surf. So I have ruled out CPU process problems. HELP!!! Brian D. Klar - CVE have you tried a running cdrecord from a command line? I had to resort to using a command line as I could not get any
RE: [expert] cdr writing
And not explain why it doesn't work since install of 7.2 still. In modules it is listed to load scsi-hostadapter. In /boot/grub/menu.lst there is this: title linux kernel (hd1,4)/vmlinuz root=/dev/hdc11 hdd=ide-scsi hdb=ide-floppy initrd (hd1,4)/initrd.img in /dev/there is this for hdd, cdrom, scd0 [root /dev] ls -al cdrom lrwxrwxrwx1 root cdwriter4 Nov 4 13:40 cdrom - scd0 brw-rw1 root disk 22, 64 Sep 27 06:31 hdd brw-rw1 briancdwriter 11, 0 Sep 27 06:31 scd0 -Original Message- From: skidley [mailto:[EMAIL PROTECTED]] Sent: Tuesday, November 14, 2000 10:54 AM To: '[EMAIL PROTECTED]' Subject: RE: [expert] cdr writing On Tue, 14 Nov 2000, Klar Brian D Contr MSG/SWS wrote: all of these gui gtk cd burning software are just frontends to cdrecord and other command line tools like mkisofs, etc. so that would explain why you would get cdrecord output. I will try, just seems a bit odd that the output I posted is cdrecord's output from within one of the gui programs I tried. -Original Message- From: Tom Berkley [mailto:[EMAIL PROTECTED]] Sent: Monday, November 13, 2000 11:53 PM To: [EMAIL PROTECTED] Subject: Re: [expert] cdr writing The recommendation to use cdrecord from the command line is a very good one to try. xcdroast made a lot of coasters for me when I started to burn cd's in linux but when I went to cdrecord from the command line, I got clean fast burns (10 minutes for a full cd at 8x on my plextor scsi cdr). cdrecord has never given me a coaster. Tom Berkley "Joseph S. Gardner" wrote: Klar Brian D Contr MSG/SWS wrote: My fault, I thought I put it in there, I only have the one cdrom drive, and I do make image files to the hd. Thought it doesnt matter. If I try to dup a CD or try to move files from hd to cd. Same result. Brian -Original Message- From: Scott Tyson [mailto:[EMAIL PROTECTED]] You might be getting buffer underruns. I haven't seen one of these with Xcdroast so I'm not sure what it spits back when it deos hit one. Try putting the cd contents to Disc then burning from there. When I do cd-cd copies under Windows I have to do this or I get underruns. *** REPLY SEPARATOR *** On 11/13/2000 at 2:54 PM Klar Brian D Contr MSG/SWS scribbled: I am having real problems trying to burn a CD-R. No matter what program I use, or what account I am under (i.e. root, or other users). When I try to either copy a CD, or make a DATA CD, 5 Megs into it I get a failure, medium error. I can burn a CD-RW with no problems though. I find it hard to believe that I am getting the bad one of the stack in Linux, when win will burn every CD correctly, instead of a coaster. Here is the output of cdrecord on one try. I think I was using Xcdroast here. pregap1: -1 Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling TOC Type: 1 = CD-ROM scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 2.1.39 Using libscg version 'schily-0.1' atapi: 1 Device type: Removable CD-ROM Version: 0 Response Format: 1 Vendor_info: 'SONY' Identifikation : 'CD-RW CRX100E ' Revision : '1.0j' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO Drive buf size : 1040128 = 1015 KB FIFO size : 4194304 = 4096 KB Track 01: data 500 MB Total size: 575 MB (56:59.94) = 256496 sectors Lout start: 575 MB (57:01/71) = 256496 sectors Current Secsize: 2048 ATIP start of lead in: -11640 (97:26/60) ATIP start of lead out: 359849 (79:59/74) Disk type:Long strategy type (Cyanine, AZO or similar) Manuf. index: 3 Manufacturer: CMC Magnetics Corporation Blocks total: 359849 Blocks current: 359849 Blocks remaining: 103353 Starting to write CD/DVD at speed 2 in write mode for single session. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... Sending CUE sheet... cdrecord: WARNING: Drive returns wrong startsec (0) using -150 Writing pregap for track 1 at -150 Starting new track at sector: 0 CDB: 2A 00 00 00 0D CE 00 00 1F 00 cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error Sense Bytes: 70 00 03 00 00 00 00 12 00 00 00 00 0C 09 00 00 status: 0x2 (CHECK CONDITION) Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x0C Qual 0x09 (write error - loss of streaming) Fru 0x0 Sense flags: Blk 0 (not valid) write track data: error after 7237632 bytes Sense Bytes: 70 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00 Writing time: 113.651s Fixating... Fixating time:0.004s Any help would be appreciated since I only use windows right now for scanning since I ca
Re: [expert] cdr writing
Klar Brian D Contr MSG/SWS wrote: I am having real problems trying to burn a CD-R. No matter what program I use, or what account I am under (i.e. root, or other users). When I try to either copy a CD, or make a DATA CD, 5 Megs into it I get a failure, medium error. I can burn a CD-RW with no problems though. I find it hard to believe that I am getting the bad one of the stack in Linux, when win will burn every CD correctly, instead of a coaster. Here is the output of cdrecord on one try. I think I was using Xcdroast here. pregap1: -1 Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling TOC Type: 1 = CD-ROM scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 2.1.39 Using libscg version 'schily-0.1' atapi: 1 Device type: Removable CD-ROM Version: 0 Response Format: 1 Vendor_info: 'SONY' Identifikation : 'CD-RW CRX100E ' Revision : '1.0j' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO Drive buf size : 1040128 = 1015 KB FIFO size : 4194304 = 4096 KB Track 01: data 500 MB Total size: 575 MB (56:59.94) = 256496 sectors Lout start: 575 MB (57:01/71) = 256496 sectors Current Secsize: 2048 ATIP start of lead in: -11640 (97:26/60) ATIP start of lead out: 359849 (79:59/74) Disk type:Long strategy type (Cyanine, AZO or similar) Manuf. index: 3 Manufacturer: CMC Magnetics Corporation Blocks total: 359849 Blocks current: 359849 Blocks remaining: 103353 Starting to write CD/DVD at speed 2 in write mode for single session. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... Sending CUE sheet... cdrecord: WARNING: Drive returns wrong startsec (0) using -150 Writing pregap for track 1 at -150 Starting new track at sector: 0 CDB: 2A 00 00 00 0D CE 00 00 1F 00 cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error Sense Bytes: 70 00 03 00 00 00 00 12 00 00 00 00 0C 09 00 00 status: 0x2 (CHECK CONDITION) Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x0C Qual 0x09 (write error - loss of streaming) Fru 0x0 Sense flags: Blk 0 (not valid) From the above message it appears that you have a bad disk. Maybe a previous write cause it or simply one from the manufacture that's bad. Try a new disk. write track data: error after 7237632 bytes Sense Bytes: 70 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00 Writing time: 113.651s Fixating... Fixating time:0.004s Any help would be appreciated since I only use windows right now for scanning since I can not find support for my parallel scanner. Not a big issue right now either since I put the scanner on my gf's machine. I can burn a CD-RW with any program I wish to use. System is PII-450 128M RAM Sony CRX-100E internal IDE KDE2 as my environment I have tried to copy both a previously burned cd, and an original manufactured CD. When I burn a CD, that is all I do, I don't try to run other apps nor do I surf. So I have ruled out CPU process problems. HELP!!! Brian D. Klar - CVE OTS WPAFB (937)257-5773 937-973-3125 (Pager) Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list. -- Sword'sEdge VoiceMail/Fax: (858) 860-6406 x1587 Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.
Re: [expert] cdr writing
Try using kisocd. I haven't written a single coasterwith it since I started. It'sjust a front end for cdrecord, but it's a decent one. On Mon, 13 Nov 2000, Tom Berkley wrote: Date: Mon, 13 Nov 2000 20:53:14 -0800 From: Tom Berkley [EMAIL PROTECTED] Reply-To: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: Re: [expert] cdr writing The recommendation to use cdrecord from the command line is a very good one to try. xcdroast made a lot of coasters for me when I started to burn cd's in linux but when I went to cdrecord from the command line, I got clean fast burns (10 minutes for a full cd at 8x on my plextor scsi cdr). cdrecord has never given me a coaster. Tom Berkley "Joseph S. Gardner" wrote: Klar Brian D Contr MSG/SWS wrote: My fault, I thought I put it in there, I only have the one cdrom drive, and I do make image files to the hd. Thought it doesnt matter. If I try to dup a CD or try to move files from hd to cd. Same result. Brian -Original Message- From: Scott Tyson [mailto:[EMAIL PROTECTED]] You might be getting buffer underruns. I haven't seen one of these with Xcdroast so I'm not sure what it spits back when it deos hit one. Try putting the cd contents to Disc then burning from there. When I do cd-cd copies under Windows I have to do this or I get underruns. *** REPLY SEPARATOR *** On 11/13/2000 at 2:54 PM Klar Brian D Contr MSG/SWS scribbled: I am having real problems trying to burn a CD-R. No matter what program I use, or what account I am under (i.e. root, or other users). When I try to either copy a CD, or make a DATA CD, 5 Megs into it I get a failure, medium error. I can burn a CD-RW with no problems though. I find it hard to believe that I am getting the bad one of the stack in Linux, when win will burn every CD correctly, instead of a coaster. Here is the output of cdrecord on one try. I think I was using Xcdroast here. pregap1: -1 Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling TOC Type: 1 = CD-ROM scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 2.1.39 Using libscg version 'schily-0.1' atapi: 1 Device type: Removable CD-ROM Version: 0 Response Format: 1 Vendor_info: 'SONY' Identifikation : 'CD-RW CRX100E ' Revision : '1.0j' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO Drive buf size : 1040128 = 1015 KB FIFO size : 4194304 = 4096 KB Track 01: data 500 MB Total size: 575 MB (56:59.94) = 256496 sectors Lout start: 575 MB (57:01/71) = 256496 sectors Current Secsize: 2048 ATIP start of lead in: -11640 (97:26/60) ATIP start of lead out: 359849 (79:59/74) Disk type:Long strategy type (Cyanine, AZO or similar) Manuf. index: 3 Manufacturer: CMC Magnetics Corporation Blocks total: 359849 Blocks current: 359849 Blocks remaining: 103353 Starting to write CD/DVD at speed 2 in write mode for single session. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... Sending CUE sheet... cdrecord: WARNING: Drive returns wrong startsec (0) using -150 Writing pregap for track 1 at -150 Starting new track at sector: 0 CDB: 2A 00 00 00 0D CE 00 00 1F 00 cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error Sense Bytes: 70 00 03 00 00 00 00 12 00 00 00 00 0C 09 00 00 status: 0x2 (CHECK CONDITION) Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x0C Qual 0x09 (write error - loss of streaming) Fru 0x0 Sense flags: Blk 0 (not valid) write track data: error after 7237632 bytes Sense Bytes: 70 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00 Writing time: 113.651s Fixating... Fixating time:0.004s Any help would be appreciated since I only use windows right now for scanning since I can not find support for my parallel scanner. Not a big issue right now either since I put the scanner on my gf's machine. I can burn a CD-RW with any program I wish to use. System is PII-450 128M RAM Sony CRX-100E internal IDE KDE2 as my environment I have tried to copy both a previously burned cd, and an original manufactured CD. When I burn a CD, that is all I do, I don't try to run other apps nor do I surf. So I have ruled out CPU process problems. HELP!!! Brian D. Klar - CVE have you tried a running cdrecord from a command line? I had to resort to using a command line as I could not get any of the gui versions to work. Also what is the make and speed of your CD-RW? I found that even though my CD-RW was supposed to write at 10X that most cd's whilst being certified to 12X skip the 10X spee
[expert] cdr writing
I am having real problems trying to burn a CD-R. No matter what program I use, or what account I am under (i.e. root, or other users). When I try to either copy a CD, or make a DATA CD, 5 Megs into it I get a failure, medium error. I can burn a CD-RW with no problems though. I find it hard to believe that I am getting the bad one of the stack in Linux, when win will burn every CD correctly, instead of a coaster. Here is the output of cdrecord on one try. I think I was using Xcdroast here. pregap1: -1 Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling TOC Type: 1 = CD-ROM scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 2.1.39 Using libscg version 'schily-0.1' atapi: 1 Device type: Removable CD-ROM Version: 0 Response Format: 1 Vendor_info: 'SONY' Identifikation : 'CD-RW CRX100E ' Revision : '1.0j' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO Drive buf size : 1040128 = 1015 KB FIFO size : 4194304 = 4096 KB Track 01: data 500 MB Total size: 575 MB (56:59.94) = 256496 sectors Lout start: 575 MB (57:01/71) = 256496 sectors Current Secsize: 2048 ATIP start of lead in: -11640 (97:26/60) ATIP start of lead out: 359849 (79:59/74) Disk type:Long strategy type (Cyanine, AZO or similar) Manuf. index: 3 Manufacturer: CMC Magnetics Corporation Blocks total: 359849 Blocks current: 359849 Blocks remaining: 103353 Starting to write CD/DVD at speed 2 in write mode for single session. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... Sending CUE sheet... cdrecord: WARNING: Drive returns wrong startsec (0) using -150 Writing pregap for track 1 at -150 Starting new track at sector: 0 CDB: 2A 00 00 00 0D CE 00 00 1F 00 cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error Sense Bytes: 70 00 03 00 00 00 00 12 00 00 00 00 0C 09 00 00 status: 0x2 (CHECK CONDITION) Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x0C Qual 0x09 (write error - loss of streaming) Fru 0x0 Sense flags: Blk 0 (not valid) write track data: error after 7237632 bytes Sense Bytes: 70 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00 Writing time: 113.651s Fixating... Fixating time:0.004s Any help would be appreciated since I only use windows right now for scanning since I can not find support for my parallel scanner. Not a big issue right now either since I put the scanner on my gf's machine. I can burn a CD-RW with any program I wish to use. System is PII-450 128M RAM Sony CRX-100E internal IDE KDE2 as my environment I have tried to copy both a previously burned cd, and an original manufactured CD. When I burn a CD, that is all I do, I don't try to run other apps nor do I surf. So I have ruled out CPU process problems. HELP!!! Brian D. Klar - CVE OTS WPAFB (937)257-5773 937-973-3125 (Pager) Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.
Re: [expert] cdr writing
You might be getting buffer underruns. I haven't seen one of these with Xcdroast so I'm not sure what it spits back when it deos hit one. Try putting the cd contents to Disc then burning from there. When I do cd-cd copies under Windows I have to do this or I get underruns. *** REPLY SEPARATOR *** On 11/13/2000 at 2:54 PM Klar Brian D Contr MSG/SWS scribbled: I am having real problems trying to burn a CD-R. No matter what program I use, or what account I am under (i.e. root, or other users). When I try to either copy a CD, or make a DATA CD, 5 Megs into it I get a failure, medium error. I can burn a CD-RW with no problems though. I find it hard to believe that I am getting the bad one of the stack in Linux, when win will burn every CD correctly, instead of a coaster. Here is the output of cdrecord on one try. I think I was using Xcdroast here. pregap1: -1 Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling TOC Type: 1 = CD-ROM scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 2.1.39 Using libscg version 'schily-0.1' atapi: 1 Device type: Removable CD-ROM Version: 0 Response Format: 1 Vendor_info: 'SONY' Identifikation : 'CD-RW CRX100E ' Revision : '1.0j' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO Drive buf size : 1040128 = 1015 KB FIFO size : 4194304 = 4096 KB Track 01: data 500 MB Total size: 575 MB (56:59.94) = 256496 sectors Lout start: 575 MB (57:01/71) = 256496 sectors Current Secsize: 2048 ATIP start of lead in: -11640 (97:26/60) ATIP start of lead out: 359849 (79:59/74) Disk type:Long strategy type (Cyanine, AZO or similar) Manuf. index: 3 Manufacturer: CMC Magnetics Corporation Blocks total: 359849 Blocks current: 359849 Blocks remaining: 103353 Starting to write CD/DVD at speed 2 in write mode for single session. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... Sending CUE sheet... cdrecord: WARNING: Drive returns wrong startsec (0) using -150 Writing pregap for track 1 at -150 Starting new track at sector: 0 CDB: 2A 00 00 00 0D CE 00 00 1F 00 cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error Sense Bytes: 70 00 03 00 00 00 00 12 00 00 00 00 0C 09 00 00 status: 0x2 (CHECK CONDITION) Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x0C Qual 0x09 (write error - loss of streaming) Fru 0x0 Sense flags: Blk 0 (not valid) write track data: error after 7237632 bytes Sense Bytes: 70 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00 Writing time: 113.651s Fixating... Fixating time:0.004s Any help would be appreciated since I only use windows right now for scanning since I can not find support for my parallel scanner. Not a big issue right now either since I put the scanner on my gf's machine. I can burn a CD-RW with any program I wish to use. System is PII-450 128M RAM Sony CRX-100E internal IDE KDE2 as my environment I have tried to copy both a previously burned cd, and an original manufactured CD. When I burn a CD, that is all I do, I don't try to run other apps nor do I surf. So I have ruled out CPU process problems. HELP!!! Brian D. Klar - CVE OTS WPAFB (937)257-5773 937-973-3125 (Pager) Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list. Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.
RE: [expert] cdr writing
My fault, I thought I put it in there, I only have the one cdrom drive, and I do make image files to the hd. Thought it doesnt matter. If I try to dup a CD or try to move files from hd to cd. Same result. Brian -Original Message- From: Scott Tyson [mailto:[EMAIL PROTECTED]] Sent: Monday, November 13, 2000 3:15 PM To: [EMAIL PROTECTED] Subject: Re: [expert] cdr writing You might be getting buffer underruns. I haven't seen one of these with Xcdroast so I'm not sure what it spits back when it deos hit one. Try putting the cd contents to Disc then burning from there. When I do cd-cd copies under Windows I have to do this or I get underruns. *** REPLY SEPARATOR *** On 11/13/2000 at 2:54 PM Klar Brian D Contr MSG/SWS scribbled: I am having real problems trying to burn a CD-R. No matter what program I use, or what account I am under (i.e. root, or other users). When I try to either copy a CD, or make a DATA CD, 5 Megs into it I get a failure, medium error. I can burn a CD-RW with no problems though. I find it hard to believe that I am getting the bad one of the stack in Linux, when win will burn every CD correctly, instead of a coaster. Here is the output of cdrecord on one try. I think I was using Xcdroast here. pregap1: -1 Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling TOC Type: 1 = CD-ROM scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 2.1.39 Using libscg version 'schily-0.1' atapi: 1 Device type: Removable CD-ROM Version: 0 Response Format: 1 Vendor_info: 'SONY' Identifikation : 'CD-RW CRX100E ' Revision : '1.0j' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO Drive buf size : 1040128 = 1015 KB FIFO size : 4194304 = 4096 KB Track 01: data 500 MB Total size: 575 MB (56:59.94) = 256496 sectors Lout start: 575 MB (57:01/71) = 256496 sectors Current Secsize: 2048 ATIP start of lead in: -11640 (97:26/60) ATIP start of lead out: 359849 (79:59/74) Disk type:Long strategy type (Cyanine, AZO or similar) Manuf. index: 3 Manufacturer: CMC Magnetics Corporation Blocks total: 359849 Blocks current: 359849 Blocks remaining: 103353 Starting to write CD/DVD at speed 2 in write mode for single session. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... Sending CUE sheet... cdrecord: WARNING: Drive returns wrong startsec (0) using -150 Writing pregap for track 1 at -150 Starting new track at sector: 0 CDB: 2A 00 00 00 0D CE 00 00 1F 00 cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error Sense Bytes: 70 00 03 00 00 00 00 12 00 00 00 00 0C 09 00 00 status: 0x2 (CHECK CONDITION) Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x0C Qual 0x09 (write error - loss of streaming) Fru 0x0 Sense flags: Blk 0 (not valid) write track data: error after 7237632 bytes Sense Bytes: 70 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00 Writing time: 113.651s Fixating... Fixating time:0.004s Any help would be appreciated since I only use windows right now for scanning since I can not find support for my parallel scanner. Not a big issue right now either since I put the scanner on my gf's machine. I can burn a CD-RW with any program I wish to use. System is PII-450 128M RAM Sony CRX-100E internal IDE KDE2 as my environment I have tried to copy both a previously burned cd, and an original manufactured CD. When I burn a CD, that is all I do, I don't try to run other apps nor do I surf. So I have ruled out CPU process problems. HELP!!! Brian D. Klar - CVE OTS WPAFB (937)257-5773 937-973-3125 (Pager) Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list. Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.
Re: [expert] cdr writing
Klar Brian D Contr MSG/SWS wrote: My fault, I thought I put it in there, I only have the one cdrom drive, and I do make image files to the hd. Thought it doesnt matter. If I try to dup a CD or try to move files from hd to cd. Same result. Brian -Original Message- From: Scott Tyson [mailto:[EMAIL PROTECTED]] You might be getting buffer underruns. I haven't seen one of these with Xcdroast so I'm not sure what it spits back when it deos hit one. Try putting the cd contents to Disc then burning from there. When I do cd-cd copies under Windows I have to do this or I get underruns. *** REPLY SEPARATOR *** On 11/13/2000 at 2:54 PM Klar Brian D Contr MSG/SWS scribbled: I am having real problems trying to burn a CD-R. No matter what program I use, or what account I am under (i.e. root, or other users). When I try to either copy a CD, or make a DATA CD, 5 Megs into it I get a failure, medium error. I can burn a CD-RW with no problems though. I find it hard to believe that I am getting the bad one of the stack in Linux, when win will burn every CD correctly, instead of a coaster. Here is the output of cdrecord on one try. I think I was using Xcdroast here. pregap1: -1 Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling TOC Type: 1 = CD-ROM scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 2.1.39 Using libscg version 'schily-0.1' atapi: 1 Device type: Removable CD-ROM Version: 0 Response Format: 1 Vendor_info: 'SONY' Identifikation : 'CD-RW CRX100E ' Revision : '1.0j' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO Drive buf size : 1040128 = 1015 KB FIFO size : 4194304 = 4096 KB Track 01: data 500 MB Total size: 575 MB (56:59.94) = 256496 sectors Lout start: 575 MB (57:01/71) = 256496 sectors Current Secsize: 2048 ATIP start of lead in: -11640 (97:26/60) ATIP start of lead out: 359849 (79:59/74) Disk type:Long strategy type (Cyanine, AZO or similar) Manuf. index: 3 Manufacturer: CMC Magnetics Corporation Blocks total: 359849 Blocks current: 359849 Blocks remaining: 103353 Starting to write CD/DVD at speed 2 in write mode for single session. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... Sending CUE sheet... cdrecord: WARNING: Drive returns wrong startsec (0) using -150 Writing pregap for track 1 at -150 Starting new track at sector: 0 CDB: 2A 00 00 00 0D CE 00 00 1F 00 cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error Sense Bytes: 70 00 03 00 00 00 00 12 00 00 00 00 0C 09 00 00 status: 0x2 (CHECK CONDITION) Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x0C Qual 0x09 (write error - loss of streaming) Fru 0x0 Sense flags: Blk 0 (not valid) write track data: error after 7237632 bytes Sense Bytes: 70 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00 Writing time: 113.651s Fixating... Fixating time:0.004s Any help would be appreciated since I only use windows right now for scanning since I can not find support for my parallel scanner. Not a big issue right now either since I put the scanner on my gf's machine. I can burn a CD-RW with any program I wish to use. System is PII-450 128M RAM Sony CRX-100E internal IDE KDE2 as my environment I have tried to copy both a previously burned cd, and an original manufactured CD. When I burn a CD, that is all I do, I don't try to run other apps nor do I surf. So I have ruled out CPU process problems. HELP!!! Brian D. Klar - CVE have you tried a running cdrecord from a command line? I had to resort to using a command line as I could not get any of the gui versions to work. Also what is the make and speed of your CD-RW? I found that even though my CD-RW was supposed to write at 10X that most cd's whilst being certified to 12X skip the 10X speed for some reason or another (ie. 1X,2X,4X,6X,8X,12X) . -- Joseph S Gardner Senior Designer / Technical Support Kirby Co., Cleveland, OH [EMAIL PROTECTED] The box said, "Requires Windows 3.x or better", so I got Linux. Registered Linux user #1696600 Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.
Re: [expert] cdr writing
The recommendation to use cdrecord from the command line is a very good one to try. xcdroast made a lot of coasters for me when I started to burn cd's in linux but when I went to cdrecord from the command line, I got clean fast burns (10 minutes for a full cd at 8x on my plextor scsi cdr). cdrecord has never given me a coaster. Tom Berkley "Joseph S. Gardner" wrote: Klar Brian D Contr MSG/SWS wrote: My fault, I thought I put it in there, I only have the one cdrom drive, and I do make image files to the hd. Thought it doesnt matter. If I try to dup a CD or try to move files from hd to cd. Same result. Brian -Original Message- From: Scott Tyson [mailto:[EMAIL PROTECTED]] You might be getting buffer underruns. I haven't seen one of these with Xcdroast so I'm not sure what it spits back when it deos hit one. Try putting the cd contents to Disc then burning from there. When I do cd-cd copies under Windows I have to do this or I get underruns. *** REPLY SEPARATOR *** On 11/13/2000 at 2:54 PM Klar Brian D Contr MSG/SWS scribbled: I am having real problems trying to burn a CD-R. No matter what program I use, or what account I am under (i.e. root, or other users). When I try to either copy a CD, or make a DATA CD, 5 Megs into it I get a failure, medium error. I can burn a CD-RW with no problems though. I find it hard to believe that I am getting the bad one of the stack in Linux, when win will burn every CD correctly, instead of a coaster. Here is the output of cdrecord on one try. I think I was using Xcdroast here. pregap1: -1 Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling TOC Type: 1 = CD-ROM scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 2.1.39 Using libscg version 'schily-0.1' atapi: 1 Device type: Removable CD-ROM Version: 0 Response Format: 1 Vendor_info: 'SONY' Identifikation : 'CD-RW CRX100E ' Revision : '1.0j' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO Drive buf size : 1040128 = 1015 KB FIFO size : 4194304 = 4096 KB Track 01: data 500 MB Total size: 575 MB (56:59.94) = 256496 sectors Lout start: 575 MB (57:01/71) = 256496 sectors Current Secsize: 2048 ATIP start of lead in: -11640 (97:26/60) ATIP start of lead out: 359849 (79:59/74) Disk type:Long strategy type (Cyanine, AZO or similar) Manuf. index: 3 Manufacturer: CMC Magnetics Corporation Blocks total: 359849 Blocks current: 359849 Blocks remaining: 103353 Starting to write CD/DVD at speed 2 in write mode for single session. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... Sending CUE sheet... cdrecord: WARNING: Drive returns wrong startsec (0) using -150 Writing pregap for track 1 at -150 Starting new track at sector: 0 CDB: 2A 00 00 00 0D CE 00 00 1F 00 cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error Sense Bytes: 70 00 03 00 00 00 00 12 00 00 00 00 0C 09 00 00 status: 0x2 (CHECK CONDITION) Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x0C Qual 0x09 (write error - loss of streaming) Fru 0x0 Sense flags: Blk 0 (not valid) write track data: error after 7237632 bytes Sense Bytes: 70 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00 Writing time: 113.651s Fixating... Fixating time:0.004s Any help would be appreciated since I only use windows right now for scanning since I can not find support for my parallel scanner. Not a big issue right now either since I put the scanner on my gf's machine. I can burn a CD-RW with any program I wish to use. System is PII-450 128M RAM Sony CRX-100E internal IDE KDE2 as my environment I have tried to copy both a previously burned cd, and an original manufactured CD. When I burn a CD, that is all I do, I don't try to run other apps nor do I surf. So I have ruled out CPU process problems. HELP!!! Brian D. Klar - CVE have you tried a running cdrecord from a command line? I had to resort to using a command line as I could not get any of the gui versions to work. Also what is the make and speed of your CD-RW? I found that even though my CD-RW was supposed to write at 10X that most cd's whilst being certified to 12X skip the 10X speed for some reason or another (ie. 1X,2X,4X,6X,8X,12X) . -- Joseph S Gardner Senior Designer / Technical Support Kirby Co., Cleveland, OH [EMAIL PROTECTED] The box said, "Requires Windows 3.x or better", so I got Linux. Registered Linux user #1696600 Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list. Keep in touch with