[expert] arts constantly dies now after I updated
The subject says it all- it doesn't last long and no more arts arts-2.1.2-2mdk xmms-arts-0.4-3mdk libarts2-2.1.2-2mdk xmms arts is installed but I'm not using it. -- Jason Straight
Re: [expert] arts constantly dies now after I updated
Well - I went to the arts webpage and grabbed the newest snapshot, takes longer to compile than I thought but it compiled clean, installed and we'll see how well it works - it's been working now for a few mins if this clears it up I'll let you know. I left the newest arts mdk rpm's in place so I'd have all the kde gui add on stuff and just did a pretty generic install: ./configure --prefix=/usr make make install so it replaced anything that was in there from the rpm's. logged out of kde and back in and works good so far. On Thursday 31 May 2001 21:40, you wrote: On Thursday 31 May 2001 17:40, Jason Straight wrote: The subject says it all- it doesn't last long and no more arts arts-2.1.2-2mdk xmms-arts-0.4-3mdk libarts2-2.1.2-2mdk xmms arts is installed but I'm not using it. I don't have an answer. I had the same problem so back the system down to the arts-2.1.1-7 and libarts2-2.1.1-7. After doing so everything worked. If any one knows how to get arts-2.1.2-2 and libarts2.-2.1.2-2 to work, I'd like to know how you did it. -- Jason Straight
Re: [expert] arts constantly dies now after I updated
The self compiled arts is working great - been running now for a good couple hours without problems. On Thursday 31 May 2001 22:51, you wrote: Well - I went to the arts webpage and grabbed the newest snapshot, takes longer to compile than I thought but it compiled clean, installed and we'll see how well it works - it's been working now for a few mins if this clears it up I'll let you know. I left the newest arts mdk rpm's in place so I'd have all the kde gui add on stuff and just did a pretty generic install: ./configure --prefix=/usr make make install so it replaced anything that was in there from the rpm's. logged out of kde and back in and works good so far. On Thursday 31 May 2001 21:40, you wrote: On Thursday 31 May 2001 17:40, Jason Straight wrote: The subject says it all- it doesn't last long and no more arts arts-2.1.2-2mdk xmms-arts-0.4-3mdk libarts2-2.1.2-2mdk xmms arts is installed but I'm not using it. I don't have an answer. I had the same problem so back the system down to the arts-2.1.1-7 and libarts2-2.1.1-7. After doing so everything worked. If any one knows how to get arts-2.1.2-2 and libarts2.-2.1.2-2 to work, I'd like to know how you did it. -- Jason Straight
[expert] How-to create hdlist.cz?
How does one create the hdlists for dependancies and such? I want to keep a local ftp mirror of updates for my servers but I need to specify the relative path of hdlist.cz for urpmi. Thanks -- Jason Straight
[expert] mdk8 - smb/nmb weird [tree connect failed: ERRSRV - ERRinvnetname]
Samba is acting wierd and I can't quite seem to pin down the reason for it. If smb is started at boot time it works fine. If smb is off at boot and I start it manually, or if I restart smb after boot I get this [root@jkd rc5.d]# smbclient -L localhost added interface ip=12.32.79.nn bcast=12.32.79.79 nmask=255.255.255.240 Password: Anonymous login successful Domain=[PENGUINFARM] OS=[Unix] Server=[Samba 2.0.8] tree connect failed: ERRSRV - ERRinvnetname (Invalid network name in tree connect.) [root@jkd rc5.d]# The only thing I can figure is that there must be something that starts after smb that if smb is restarted or started too late this other app must interfere somehow. I don't have anything that would bind to the nmbd or smbd ports that I know of - I'm not running portsentry at this time. Anyone know why this is happening? -- Jason Straight
Re: [expert] Orinoco WaveLan solved
all one has to do to get the wavelan card working with mandrake 7.2 is to add eth=1 to the opts in /etc/pcmcia/config.opts. The problem is that setting up networking with linuxconf or draknet associates the device eth0 with wvaln_cs in /etc/modules.conf when wvlan_cs actually brings up the device as wvlan0. So by setting eth=1 in config.opts it brings up your wireless card as ethX and everything is fine. On Thursday 22 February 2001 21:28, you wrote: Hi List, FYI (and for the archives), I received the following advice from the [EMAIL PROTECTED] list: On 2/23/01 10:22 AM, "Anthony Wesley" awesley@x wrote: The exact values depends a bit on what version of the pcmcia package you have. I am not familiar with Mandrake, but the first thing you ought to do is try to grab pcmcia-3.1.23. I found that 3.1.20 worked ok on older kernels (2.2.14) but would not compile on newer kernels. 3.1.21 and 3.1.22 had bugs that prevented the Orinoco cards from working without a patch. The patch is pretty simple - basically David Hinds (the maintainer for pcmcia-cs) tried to introduce parameter checking, but got it a bit wrong so that the softwarerefused to configure the cards even though the cards were capable of taking the configuration commands. 3.1.23 works ok with my current kernel (2.2.18). Anthony was quite right about the pcmcia-cs package. pcmcia-cs-3.1.24 from sourceforge works a treat. FWIW, I have the client correctly using an Apple AirPort base station for bridging to my LAN and the net. -- Jason Straight
Re: [expert] mandrake 8.0b and cdrw
On Tuesday 20 February 2001 10:02, you wrote: Ok, this is my first time with scsi and linux. I have 7.2 and now 8.0 installed on my machine which dual boots with 98. Mandrake 8.0 beta sets up the cdrw (Sony) after installation. The cdrw is found perfectly. Installation was great for 8.0 (mostly) but cdrecord --scanbus doesn't show it. My drive layout is as follows: ide0 -- Master 6.4G (all Win98) Slave zip 100 ide1 -- Master 6.4G (Mdk 7.2) Slave Sony CDRW These are addressed as hda, hdb, hdc, hdd accordingly My SCSI devices are sda 4.3G, and sdb 4.3G running off an Adaptec 2930 and one cable. cdrecord --scanbus shows scsibus0: 0,0,0 0) * 0,1,0 1) * 0,2,0 2) * 0,3,0 3) * 0,4,0 4) * 0,5,0 5) 'WDIGTL ' 'ENTERPRISE ' '1.91' Disk 0,6,0 6) 'WDIGTL ' 'ENTERPRISE ' '1.91' Disk 0,7,0 7) * scsibus1: 1,0,0 100) 'IOMEGA ' 'ZIP 100 ' '12.A' Removable Disk 1,1,0 101) * 1,2,0 102) * 1,3,0 103) * 1,4,0 104) * 1,5,0 105) * 1,6,0 106) * 1,7,0 107) * Question, How do I get the cdrw to join this group of scsi devices so I can burn a CD. Here is my dev listings [root /dev] ls -al hdd brw-rw1 root disk 22, 64 Jan 17 06:17 hdd [root /dev] ls -al cdrom lrwxrwxrwx1 briancdwriter4 Feb 18 21:41 cdrom - scd0 [root /dev] ls -al scd0 brw-rw1 briancdwriter 11, 0 Jan 17 06:18 scd0 lsmod (condensed) is: [root /dev] lsmod Module Size Used by sg 16064 0 (autoclean) aic7xxx 137440 2 Any help appreciated Brian D. Klar - CVE OTS WPAFB (937) 656-2861 (937) 973-3125 (pager) give the kernel param at boot time "hdd=ide-scsi" Here is my lilo entry image=/boot/vmlinuz-2.4.1 label=2.4 root=/dev/hda5 append=" ide0=autotune ide1=autotune hdb=ide-scsi hdc=ide-scsi" read-only You just need to add the stuff to the append= line. -- Jason Straight
Re: [expert] TTF's crash my xfs
Why is it that I always figure something out 2 minutes after I post it to the list? Anyway, I got my font's working - I had to edit the font files and delete the offending fonts. Jason Straight wrote: Every time I try to select a TTF from within drakfont or gimp xfs dies and has to be restarted so I delete all my ttf fonts till I find out what's causing this. Any ideas? Thanks -- Jason Straight NMO.net Chief Network Engineer/Programmer
[expert] Dell Inspiron 8000 1400x1050 LCD Modelines?
I have a Dell Inspiron 8000 notebook with a 1400x1050 display, and an ATI Rage 128 32MB gfx card. I've updated to X4.0.2 which I am able to get to 1280x1024 24bit with adjusted HorizSync and VerticalRefresh rates, frame buffer doesn't seem to want to work for this card/monitor so I'm stuck with setting modelines manually I guess. Anyone had any luck with one of these getting it to 1400x1050? -- Jason Straight NMO.net Chief Network Engineer/Programmer
Re: [expert] Dell Inspiron 8000 1400x1050 LCD Modelines?
Actually I got it to work - 1400x1050 is nice ;) email me off list when you get ready if ya need help I'll send ya my XF86Config. I found most all I needed searching deja.com Robin Dunn wrote: I have a Dell Inspiron 8000 notebook with a 1400x1050 display, and an ATI Rage 128 32MB gfx card. I've updated to X4.0.2 which I am able to get to 1280x1024 24bit with adjusted HorizSync and VerticalRefresh rates, frame buffer doesn't seem to want to work for this card/monitor so I'm stuck with setting modelines manually I guess. Anyone had any luck with one of these getting it to 1400x1050? I havn't tried this yet myself (probably this weekend) but check out these sites: http://www.usmedia.nl/joel/inspiron.html http://orion.chem.vt.edu/i8000/ http://holbrooks.org/linux/delli8k/ And also the linux-dell-laptops mail list at egroups. It has a number of HOWTOs and setup files in the file-area at http://www.egroups.com/files/linux-dell-laptops/ -- Robin Dunn Software Craftsman [EMAIL PROTECTED] Java give you jitters? http://wxPython.org Relax with wxPython! -- Jason Straight NMO.net Chief Network Engineer/Programmer
[expert] TTF's crash my xfs
Every time I try to select a TTF from within drakfont or gimp xfs dies and has to be restarted so I delete all my ttf fonts till I find out what's causing this. Any ideas? Thanks -- Jason Straight NMO.net Chief Network Engineer/Programmer
[expert] Latptop - using removeable devices
Is there anything I can do on my laptop to have the kernel remove and or reprobe devices? ie. I have a Dell Inspiron 8000 which I'm running Mandrake 7.2, this notebook has a removeable device which I share between the CDRW and the floppy drive. I boot with the CDRW in and I can hot swap to floppy fine and use the floppy drive. When I swap back the the CDRW my machine freezes.
Re: [expert] reiser FS support
You have to apply a patch to the kernel for reiserfs, it's not included yet, supposed to be included by 2.4.1 Joshua A Roller wrote: I comiled a new kernel for my Mandrake 7.2 System and the kernel didnt have support for reiser FS on my computer. Im not sure if I missed soemthing or not , but then I installed your kernel devolpment update, (which I know you do not suport) but the update didnt support the Reiser FS either. Is there something I can do to change this? Or when you offer the 2.4 kernel as a normal update will it have support for reiserFS? Thank you, Joshua A. Roller Technical Support [EMAIL PROTECTED] Ka.Net Internet Services - 502.992.0324
[expert] 7.2 install PCMCIA freeze/hang
Trying to install Mandrake 7.2 on my Dell Inspiron 8000 laptop with cdrom and when it gets to pcmcia detection the system freezes, is there any way to skip pcmcia? maybe just using the cdrom image instead of all? How can I specify to use cdrom instead of all.rdz I tried initrd= -- Linus Torvalds said: "Quite frankly anybody who uses RedHat 7.0 and their broken compiler for _anything_ is going to have trouble." Use Mandrake instead. Jason Straight NMO.net Chief Network Engineer/Programmer Penguinfarm.com - Personal Page http://www.penguinfarm.com/ ICQ 1796276
Re: [expert] 7.2 install PCMCIA freeze/hang
Jason Straight wrote: Trying to install Mandrake 7.2 on my Dell Inspiron 8000 laptop with cdrom and when it gets to pcmcia detection the system freezes, is there any way to skip pcmcia? maybe just using the cdrom image instead of all? How can I specify to use cdrom instead of all.rdz I tried initrd= nevermind - figured it out expert noauto ;) -- Linus Torvalds said: "Quite frankly anybody who uses RedHat 7.0 and their broken compiler for _anything_ is going to have trouble." Use Mandrake instead. Jason Straight NMO.net Chief Network Engineer/Programmer Penguinfarm.com - Personal Page http://www.penguinfarm.com/ ICQ 1796276
Re: [expert] 7.2 is full of bugs!
use gcc --version to get the version of gcc it matches the dir then. On Saturday 11 November 2000 18:01, you wrote: 7.2 is listed to have # rpm -qa | grep gcc-2 gcc-2.95.2-12mdk yet there is a /usr/lib/gcc-lib/i586-mandrake-linux/2.95.3 and not a 2.95.2 directory. This might be the reason behind gcc failing 9 out of 10 times when attempting to compile programs manually. Compiling programs is a hit and miss with ld core'g when it feels like it and gcc failing to work off and on. 7.2 needed to actually be 8.0 and thuroughly tested with all the new idiotic LSB mandates that have been added along with the unofficial patches to various programs the Linux-Mandrake has slipped in. It's also a shame that AfterStep wasn't included. :) -- | d a v i d @ m i h m | dmihm @ swbell.net | webmaster @ afterstep.org | ftpmaster @ afterstep.org | dmihm @ rchitecture.com -- Content-Type: text/plain; charset="US-ASCII"; name="message.footer" Content-Transfer-Encoding: 8bit Content-Description: ---- -- Jason Straight - NMO.net Senior Network Tech Penguinfarm.com - Personal Page http://www.penguinfarm.com/ ICQ 1796276 Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.
Re: [expert] Promise Ultra100 controller
Yes, I have many machines running with the Ultra 100 right now. On Saturday 11 November 2000 17:44, you wrote: I'm wondering if the 2.2.17-21mdk kernel in mandrake 7.2 supports the promise ultra100 card. I'm planning on getting a HD and one of these controllers to run it and would like to be able to install mdk 7.2 on it fresh out of the box if I could. I've seen support for the Promise ultra33 and 66 cards in the kernel config but not the 100. Can anyone help? Thanks skidley Content-Type: text/plain; charset="US-ASCII"; name="message.footer" Content-Transfer-Encoding: 8bit Content-Description: ---- -- Jason Straight - NMO.net Senior Network Tech Penguinfarm.com - Personal Page http://www.penguinfarm.com/ ICQ 1796276 Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.
Re: [expert] VMware
For home use vmware is only $99 I think. On Monday 06 November 2000 09:08, you wrote: Would like to run win98 while I am running Linux. The first method that come to mind is VMware. But if I'm reading their site correctly it's $299sorry What other alternatives are out there. Seems like I read about something on slashdot that would do the job for much less money, $40 ?. This is my home machine ( dual 400 w/256meg ram ) no gaming. Any input on options would be great. Thanks Pat Content-Type: text/plain; charset="us-ascii"; name="message.footer" Content-Transfer-Encoding: 8bit Content-Description: ---- -- Jason Straight - NMO.net Senior Network Tech Penguinfarm.com - Personal Page http://www.penguinfarm.com/ ICQ 1796276 Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.
Re: [expert] Ping of death ?
Pretty much nothing anymore, any up to date OS won't crash because of it anymore. On Sunday 05 November 2000 20:33, you wrote: Hey anyone know about ping of death ? what does it do ? Content-Type: text/plain; charset="iso-8859-1"; name="message.footer" Content-Transfer-Encoding: 8bit Content-Description: ---- -- Jason Straight - NMO.net Senior Network Tech Penguinfarm.com - Personal Page http://www.penguinfarm.com/ ICQ 1796276 Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.
[expert] Kernel 2.4.0-test10
I know this isn't Mandrake specific, at least I think not - but I tried to compile and run the 2.4.0test10 kernel (which I have compiled my own 2.4.0's from test3 without problems) and it get's to Uncompressing kernel ...ok booting linux kernel Then it just stops. Anyone know why it would stop here or somewhere I can go to get information on specifics like this? I don't know what I could have done any different with this one as opposed to any other kernel I compile, and I've never had problems in about 200 kernel compiles I've had over the last 2 years. -- Jason Straight - NMO.net Senior Network Tech Penguinfarm.com - Personal Page http://www.penguinfarm.com/ ICQ 1796276 Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.
Re: [expert] CL Voodoo Banshee and other 7.2 bugs!
Is sounds like your modelines are messed up - try running xvidtune as root and see if you can't adjust your picture to look normal from there. On Thursday 02 November 2000 20:49, you wrote: I'm posting this in the slim hopes someone's gotta answer.. After running RH 6.2 changing to mdk 7.1 was the most awsome install of linux I ever had, and I posted it here.. However, 7.2's got a few problems ( and I don't think they are Mandrake problems!!! ).. I was running RH 6.2 and tried RH 7 beta.. For 3 days I tried to get my ( mandrake working ) CL Voodoo Banshee and Maxtech 17" monitor working properly in 1280x1024.. I gave up and dloaded mdk 7.1.. ( I used mdk 5.3 as my FIRST PRODUCTIVE linux distro and kept mdk until the 7.0 horror stories appeared ).. Anyway, RH 7 beta contained the ( at the time brand new Xfree 4.0 server )... I tried for 3 days to get my vid/monitor combo to work.. All with the same result, pix, but a terribly distorted pincushion ( curve )... Now since mdk 7.2 has xfree 4.0 I have the SAME problem ( duh, guess its xfree 4.0?? :) ) So, I think it's an Xfree 4.0/Voodoo Banshee problem and I'm so pissed 'cause KDE 2.0 looks so good and as usual MDK installed flawless.. But in the slim hopes someone ELSE is running a CL Voodoo Banshee and has fixed this, please post and better yet email me!! Since I think I will try to go back to a known good ( Matrox ) tomorrow.. Windows, I don't worry about, everything works ( ha! ), but I run BeOS also ( which I like and Matrox G400's and such are supported ).. Any clues and/or drivers are welcome! Thanks! Alan Content-Type: text/plain; charset="iso-8859-1"; name="message.footer" Content-Transfer-Encoding: 8bit Content-Description: ---- -- Jason Straight - NMO.net Senior Network Tech Penguinfarm.com - Personal Page http://www.penguinfarm.com/ ICQ 1796276 Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.
[expert] 7.2 xmms menu's not working
I am using KDE2, and xmms won't let me select anything from the menu's via the letter buttons on the left of the LCD display, the menu comes up but I can't select anything, however if I right click on xmms somewhere to bring up the other menu things work fine. -- Jason Straight - NMO.net Senior Network Tech Penguinfarm.com - Personal Page http://www.penguinfarm.com/ ICQ 1796276 Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.
Re: [expert] Missing RPM?
Alan Shoemaker wrote: Tomnope, first off there is no /usr/share/kde (whatever) to change permissions on, Second, kmenuedit launches just fine from the command line or from it's other link in K(menu), but not from the link in the chain K(menu)-Panel-Edit Menus. When selected it pops up an applet that says that the menu editor is not installed and persents a button with oops! on it. This doesn't sound like permissions to me, it sounds like a link to nothing. I'd just like to know where that link is in the directory tree so I can fix it. Alan I wonder if they did it as a deterrent? with the [menu] package installed it's useless to update your kmenu anyway, because when you reboot it will just be written over and your changes gone. I wish they would have made a GUI editor for the new menuing system though, unless I am wrong and there is one, it seems it would be pretty easy to slap something together the way the configuration is done. I should brush up on my C and get started, haven't coded in C in quite a while - be a good project to start back up on. -- [EMAIL PROTECTED] ICQ 1796276
[expert] Re: Menus under 7.1 (was KDE problems)
kmenuedit is there, you can run it from konsole. It's probably disabled for a purpose, don't waste your time editing the kmenu, your changes won't be saved, the new menu package included with 7.1 now synronizes all menu's from a common place, and it's not the kde menu. If you change any menu in any WM and reboot your computer your changes will be lost. read /usr/doc/menu-[something] you must edit your menu's in the /etc/menu directory by creating a file for each application you want to add to the menu. here's mine for licq: ("licq" is the filename) ?package(local.licq):needs=x11 section="Networking/ICQ" title="LICQ" command="licq" icon="/usr/share/icons/icq.xpm" and for gcombust: (gcombust is the filename here) ?package(gcombust):needs=x11 section="Applications/Archiving/Cd burning" title="gcombust" command="kdesu -c gcombust" icon=/usr/share/icons/cdwriter_unmount.xpm The filename doesn't matter, the package does. If the package you installed is not an RPM, as is the case of my licq installation you must have the word "local" in your package name as I do. If not when menu updates your menu's it will look in the rpm database and see that licq is not installed, and will remove it from your menu. Gcombust is installed as an rpm, so the package name should be the real package/program name. for more info - "man menufile" Joel Stanley wrote: Is it just me, or is the standard installation of KDE for MDK 7.1 a tad broken? I installed 7.1 on a friend's computer who is pretty new to Linux and I'm in the midst of trying to show him how to add icons to the KDE panel...but the damn kmenuedit program doesn't work if I run it from the command line (it runs, but there's no way to add menu items), and for some reason KDE thinks that it is not installed when invoked from the KDE menu (it literally pops up a dialog box saying that it's not installed :) In order to add an item to the panel, the program or whatever has to have a listing in the application menu as far as I can tell, and without the menu editor, I had to drop into a shell and set up a .kdelnk file in /usr/share/applnks/...etc...far too much work. Any ideas? I checked on the webpage and didn't see anything about KDE issues and was MandrakeUpdate didn't find anything kde-related. Thanks in advance, -j -- Joel R. Stanley * [EMAIL PROTECTED] * #include std_disclaimer.h "You are in a maze of twisty passages, all alike." -- [EMAIL PROTECTED] ICQ 1796276
Re: [expert] apache suexec
Jason Straight wrote: Nevermind, I figured it out. The permissions on /usr/bin/suexec were wrong, needed to be suid root. This has to be the SLOWEST mailing list I have ever seen, anyone know what's up with that? -- Sir, I'm afraid your computer has the Microsoft virus that's been spreading to computers all over the world like wildfire and causing them to become unstable. In order to remove it go to www.linux-mandrake.com and follow the installation instructions.
Re: [expert] apache suexec
Nevermind, I figured it out. The permissions on /usr/bin/suexec were wrong, needed to be suid root. Jason Straight wrote: What does it take to use the suexec wrapper with mandrake 7.1? simply putting in apache's config the userid I want to run my cgi's doesn't seem to work. It seems to be installs as /usr/sbin/suexec exists, but upon startup of apache I don't get the message in the error log that suexec docs says I should get: [notice] suEXEC mechanism enabled (wrapper: /path/to/suexec) -- Sir, I'm afraid your computer has the Microsoft virus that's been spreading to computers all over the world like wildfire and causing them to become unstable. In order to remove it go to www.linux-mandrake.com and follow the installation instructions. -- Sir, I'm afraid your computer has the Microsoft virus that's been spreading to computers all over the world like wildfire and causing them to become unstable. In order to remove it go to www.linux-mandrake.com and follow the installation instructions.
[expert] apache suexec
What does it take to use the suexec wrapper with mandrake 7.1? simply putting in apache's config the userid I want to run my cgi's doesn't seem to work. It seems to be installs as /usr/sbin/suexec exists, but upon startup of apache I don't get the message in the error log that suexec docs says I should get: [notice] suEXEC mechanism enabled (wrapper: /path/to/suexec) -- Sir, I'm afraid your computer has the Microsoft virus that's been spreading to computers all over the world like wildfire and causing them to become unstable. In order to remove it go to www.linux-mandrake.com and follow the installation instructions.
Re: [expert] 7.1 menus
It's based on fvwm - you'll have to edit the menu files there Ibelieve. Alex V Flinsch wrote: I upgraded to 7.1 last night, the install went without a single problem, and my usb zip drive finally works (woohoo!). The synchronized menus across the windowing systems is great, and I was able to add my favorite apps which were not included in the KDE menu via kmenuedit. Is there any way to synch up all of the other window managers with the kde menu, or do I hve to edit all of the others by myself (which kind of defeats the purpose of the synched menus...)? -- Alex (Go easy on me, I'm a COBOL programmer in real life) -- Sir, I'm afraid your computer has the Microsoft virus that's been spreading to computers all over the world like wildfire and causing them to become unstable. In order to remove it go to www.linux-mandrake.com and follow the installation instructions.
[expert] auto update menu's in 7.1
I just rebooted my system to find all the changes I made to the menu's in kde gone - how does one edit the mandrake menu's so they stay constant or disable the menu update util? -- Sir, I'm afraid your computer has the Microsoft virus that's been spreading to computers all over the world like wildfire and causing them to become unstable. In order to remove it go to www.linux-mandrake.com and follow the installation instructions.
[expert] mandrake-ext iso's corrupt?
I have downloaded the mandrake 7.1 iso's (inst and ext), with md5 checksums. I have burned 2 CD's of the ext disc and the RPMS dir has some funky $!@# in it. The md5sums check good on both, I even DL the md5sums from another site to see if it matched up, and it says ok. So are the iso's bad right from mandrake or what? I don't want to go thru the setup on this and start handing out disks telling people how great it is only to have it crap half way thru package install. -- Sir, I'm afraid your computer has the Microsoft virus that's been spreading to computers all over the world like wildfire and causing them to become unstable. In order to remove it go to www.linux-mandrake.com and follow the installation instructions.
Re: [expert] Canon MultiPASS C3500 fax/printer/scanner/etc.
Set it up as a BJ-10e under linux to print, I have one right here I am using. Vincent Danen wrote: I've got the Canon MultiPASS fax/scanner/printer/copier/etc. "device" over here... picked it up yesterday for a really good price. It apparently supports only Win95/98 but I'm assuming that's the extra features like FAXing from the PC, etc. I just need it to print under Linux (none of the extra features). Has anyone had experience with these 6-in-1 deals before? The manual doesn't say anything about print compatability with other OS's, so I'm not sure... I figure I'd test it out, I'm *assuming* that it's similar to a Canon Bubble Jet as far as the printing goes. My question is, is it safe to change the printer type and just test a bunch of them out to see how it works? It wouldn't damage my printer at all, would it? I'm assuming the worst that can happen is it either won't print or it'll look all crappy-like, but I want to make sure. Also, is there a way to change the printer type? The Printer Setup in DrakConf doesn't do it... would I use something like printtool? -- Vincent Danen, ICQ: 54924721 . telnet://bbs.freezer-burn.org BBBS/LiI . Internet Rex for Linux Beta . Freezer Burn BBS Linux Information and other Goodies at Freezer Burn: www.freezer-burn.org -- Jason Straight Chief Network Engineer NMO.NET [EMAIL PROTECTED] ICQ 1796276
Re: [expert] XFree86-3.3.6
Robert J Bartels wrote: I'm trying to upgrade my X server to 3.3.6.. When I do rpm -Uvh XFree-3.3.6.rpm it complains that xinitrc = 2.4.4-10mdk is needed... When I try to update xinitrc it tells me that XFree86 = 3.3.5-12mdk is needed by xinitrc-2.4.4-10mdk... I've tried both rpm -Ivh and rpm -Uvh... I've also tried --force... which BTW doesn't force anything... Try --force --nodeps What am I doing wrong... This is turning into a big chicken and the egg problem... Bob -- Jason Straight Chief Network Engineer NMO.NET [EMAIL PROTECTED] ICQ 1796276
Re: [expert] postscript view with 7
John Aldrich wrote: On Fri, 21 Jan 2000, you wrote: Trying to view postscript documents with the usual KDE viewer does nothing but give me a blank page. If I use gv it says "unknown device x11alpha" I have a voodoo 3 card, probably something to do with the 3dfx drivers with xfree being 3.3.5 while xfree in 7.0 is 3.3.6? Do you mean PDF documents??? That too, pdf and ps. Either way - I got it working, I installed the ghostscript package from mandrake 6.1 I really wish this release remained beta for a while longer, it wasn't ready. I had to use the shapecfg and iproute packages from redhat 6.1 also, to get bandwidth control for my wireless customers. -- [EMAIL PROTECTED] ICQ 1796276
Re: [expert] LICQ broke with 7 (AIR)?
Grab the qt2-devel and qt-2 rpm's from redhat 6.1! rpm -ivh (not -Uvh, or you'll wipe out qt 1.44!, you don't want that) when you ./configure the licq qt-gui do this ./configure --with-x --with-qt-includes=/usr/lib/qt-2.0.1/include/ --with-qt-libraries=/usr/lib/qt-2.0.1/lib/ That will get you going pretty quick and painless. Rich Clark wrote: On Tue, 18 Jan 2000 [EMAIL PROTECTED] wrote: Riyad Kalla wrote: Its actually in the faq for licq... you are going to have to set your LD_LIBRARY_PATH to the directory with qt2.x in it, the only problem 1.x and 2.x are both in /usr/lib, so what I did was download qt2.x tar, compiled it myself and put it in its own dir /usr/local/lib/qt-2.0.2 and set my LD_LIBRARY_PATH to that dir, all the sudden LICQ ran fine. The problem you are getting is cause LICQ is finding 1.x versions of QT instead of 2.x hence the undefined symbols. So you have to contain 2.x by itself, I am sure there is mandrake way to do it, I just did it the easiest I could think of. Hope this helps Yeah, I figured that out after I poked around for a bit last night, and installed qt the old fashioned way too, Thanks anyway though ;-) -- [EMAIL PROTECTED] ICQ 1796276 I've grabbed the qt2 tarball from troll.no and I've run into a fustercluck of bugs in the code. I wish I knew more about C++ though; I'm guessing on what to do to fix this trash. -- Rich Clark Sign the petition at http://www.libranet.com/petition.html Help bring us more Linux Drivers -- [EMAIL PROTECTED] ICQ 1796276
[expert] Question for C/C++ programmers
Once upon a time, I programmed the Amiga in C. Today I would like to be able to code C on linux. The basic stdout stuff is easy, but I want to know what references I should buy for understanding the system calls and programming X/GTK/QT and device programming. Eventually I would like to understand linux well enough to do things like write device drivers for the kernel, etc. What books are reccomended by the experts? -- I pledge allegiance to the penguin of the united OS of Linux and to the republic for which it stands one community, under control with liberation from Microsoft and source code for all. -- [EMAIL PROTECTED] ICQ 1796276
[expert] POSTFIX (virtual domains/aliases)
I am trying to figure out how to use postfix effectively, for the short I am reading documentation now, maybe I'll figure out before I get a response, but I need to set this up quick. I need to know how to get postfix to accept mail for a domain and alias it to another address. I don't really care to have virtual mailboxes, just accept mail for [EMAIL PROTECTED] and alias it to [EMAIL PROTECTED] Thanks in advance. -- I pledge allegiance to the penguin of the united OS of Linux and to the republic for which it stands one community, in control with liberation from Microsoft and source code for all. -- [EMAIL PROTECTED] ICQ 1796276
Re: [expert] real player g2
David van Balen wrote: On Mon, 15 Nov 1999, webmedic wrote: I know there is one available where do i find it search the archives for this list (http://www.mail-archive.com/newbie@linux-mandrake.com/) a search for "real player g2" is guaranteed to come up with the URL several times. DvB I got mine from download.com -- I pledge allegiance to the penguin of the united OS of Linux and to the republic for which it stands one community, in control with liberation from Microsoft and source code for all. -- [EMAIL PROTECTED] ICQ 1796276