Re: How To Burn CDs
"Another possibility, if you have the RAM, is to use the team(1) program (it's in the ports) to buffer the data as it goes to the burner. Any reason not to use ``cdrecord -fs=64m'' (or some simular size) -- -- David([EMAIL PROTECTED] -or- [EMAIL PROTECTED]) To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
Re: How To Burn CDs
On Fri, Aug 20, 1999 at 01:04:47PM +0200, Werner Griessl wrote: Werner, like you we all got 246 line email message. You did not have to quote the *ENTIRE* thing back to us just to add 3 lines. If you don't have the time to trim, we don't have the time to read your reply. -- -- David([EMAIL PROTECTED] -or- [EMAIL PROTECTED]) To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
Re: How To Burn CDs
If you have the physical memory sure however if you don't then you will start swapping and most likely your cd recording will fail. Hence my recommendation for a small size buffer. And to the list. Please keep the comments or suggestions rolling and hopefully by early next we will have a nice "How To Burn CD " document. Cheers "Another possibility, if you have the RAM, is to use the team(1) program (it's in the ports) to buffer the data as it goes to the burner. Any reason not to use ``cdrecord -fs=64m'' (or some simular size) -- -- David([EMAIL PROTECTED] -or- [EMAIL PROTECTED]) -- Amancio Hasty [EMAIL PROTECTED] To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
Re: How To Burn CDs
If you don't have the time to trim, we don't have the time to read your Easy , Easy we are coming along fine so far so please keep the flame temperature down. If you are compelled or annoyed at the poster send him private e-mail and possibly a pointer to net - etiguette. If you do it nicely you may actually make a long term friend ... Cheers -- Amancio Hasty [EMAIL PROTECTED] To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
Re: How To Burn CDs
If you have the physical memory sure however if you don't then you will start swapping and most likely your cd recording will fail. Hence my recommendation for a small size buffer. Then there is no advantage in using `team' vs. ``cdrecord -fs=XX'', right? -- -- David([EMAIL PROTECTED] -or- [EMAIL PROTECTED]) To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
Re: How To Burn CDs
As David O'Brien wrote ... "Another possibility, if you have the RAM, is to use the team(1) program (it's in the ports) to buffer the data as it goes to the burner. Any reason not to use ``cdrecord -fs=64m'' (or some simular size) Any reason to? I mean, I never had to go over the default cdrecord uses. But I only have a 2x writer and I generally create an iso image file first. YMMV -- | / o / / _ Arnhem, The Netherlands- Powered by FreeBSD - |/|/ / / /( (_) BulteWWW : http://www.tcja.nl http://www.freebsd.org To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
Re: How To Burn CDs
"Another possibility, if you have the RAM, is to use the team(1) program (it's in the ports) to buffer the data as it goes to the burner. Any reason not to use ``cdrecord -fs=64m'' (or some simular size) Any reason to? I mean, I never had to go over the default cdrecord uses. Since the author was already suggesting the use of team(1) he obvisiously wants a larger buffer. I was mearly asking if there was something about team(1) better than ``cdrecord -fs=XX''. -- -- David([EMAIL PROTECTED] -or- [EMAIL PROTECTED]) To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
Re: How To Burn CDs
Then there is no advantage in using `team' vs. ``cdrecord -fs=XX'', right? -- -- David([EMAIL PROTECTED] -or- [EMAIL PROTECTED]) As far as I can tell there is no difference other one component less to use and ease of use. Cheers -- Amancio Hasty [EMAIL PROTECTED] To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
Re: How To Burn CDs
"Another possibility, if you have the RAM, is to use the team(1) program (it's in the ports) to buffer the data as it goes to the burner. Any reason not to use ``cdrecord -fs=64m'' (or some simular size) Any reason to? I mean, I never had to go over the default cdrecord uses. Since the author was already suggesting the use of team(1) he obvisiously wants a larger buffer. I was mearly asking if there was something about team(1) better than ``cdrecord -fs=XX''. To me in the context of cdrecord, cdrecord's option "fs" and team are about the same. Perhaps someone more familiar with cdrecord fifo.c's circular buffer algorithm and team can express a different opinion. Cheers -- Amancio Hasty [EMAIL PROTECTED] To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
How To Burn CDs
This is a summary of the information that I gather over the last few days with respect to CD recorders. It appears that the preferred and better supported CD recorders are scsi . To shorten the gap what is needed is for ATAPI cd recorders to be integrated into CAM so that we may present a unified interface to both ATAPI and SCSI CD drives. Post on -hackers if you are interested in working on such a project. The rest of this document will deal with scsi cd recorders. Software Tools : cdrecord is used to burn the CDs . cdrecord http home: http://www.fokus.gmd.de/research/cc/glone/employees/joerg.schilling/private/cdr ecord.htm cdrecord supports CD-R, CD-RW and Audio CD (Red Book) formants. cdda2wav which is now bundled with cdrecord can extract audio CD tracks. cdrecord is part of the ports/sysutils collection. toshais another scsi tool to extract CD audio tracks and it is in the ports/audio directory . tosha is native program to FreeBSD. tosha was written by Oliver Fromme [EMAIL PROTECTED] cdd another native freebsd program to extract CD audio tracks was written by Charles Henrich and is part of the ports/audio collection. mkisofs is used to create an iso 9660 cd image. It is located in the ports/sysutils collection If one of the audio "rippers" does not work report the problem after first making sure that the program does indeed support your CD disk unit and then just try another one. For a list of "reported to work" drives that work with cdrecord + cdd2wav see: http://www.fokus.gmd.de/research/cc/glone/employees/joerg.schilling/private/cdw riters-1.8.html External vs. Internal I find that my YAMAHA CRW6416sz scsi cd recorder runs rather cool . Some members on the list have reported that at least early models of their CD-Recorders run hot so they preferred to have them external due to the heat problem and/or portability . A little bit on cdrecord. To determine which scsi recorder is installed in your system issue: cdrecorder -scanbus Cdrecord release 1.8a22 Copyright (C) 1995-1999 Jörg Schilling scsibus0: 0) 'SEAGATE ' 'ST34501W' '0017' Disk 1) 'YAMAHA ' 'CRW6416S' '1.0b' Removable CD-ROM 2) * 3) 'SEAGATE ' 'ST15150W' '0023' Disk 4) * 5) * 6) * 7) * scsibus1: 100) * 101) * 102) * 103) * 104) * 105) 'UMAX' 'UMAX S-12 ' 'V2.0' Scanner 106) * 107) * So my Yamaha CD recorder is scsi bus 0 , scsi address 1, lun 0. I recommend sticking this information in /etc/default/record cat /etc/default/cdrecord CDR_DEVICE=1,0 What this means is that every time that cdrecord runs it gets is device info from /etc/default/cdrecord . If you feel somehow compel to always specify the scsi device in cdrecord, the syntax is: -dev=bus,scsi address, lun or -dev=scsi address, lun in my case is: -dev=1,0 (the default scsi bus is 0) I recommend for the first few times to use a CD-RW. They are more expensive than CD-R;however, for playing for the first time with your scsi cd recorder they can actually probably save you a lot of money. Now that you have all your hardware and software in place what can you do 8) To create an iso cd9660 with a CD-RW: mkisofs -R /mount/dir | cdrecord -blank=fast -v fs=6m speed=3 - mkisofs pipes an ISO 9660 cd image to cdrecord. cdrecord does the actual cd burning: -blank=fastfirst it does a quick blank -v verbose mode so you can see what is doing fs=6m forks a process and uses a 6MB buffer speed=3usually CD-RW can only be burned as fast as 4X you will have to experiment with your cd recorder to see what speed works best. Take a break pending upon the size of the image the process can take 1/2 hour to just a few minutes so kick back and relax. Here is session for creating audio cds. mkdir cdtracks cd cdtracks cddwa2wav -B This command generates tracks in the format of: audio_nn.wav where nn is a track number . audio in .wav format audio_nn.inf where nn is a track number . pregap info cdrecord -blank=fast -audio -useinfo audio*.wav -blank=fast blanks your CD-RW for CD-R don't include this command -audiosets audio cd recording -useinfo use the pregap info generated by cdd2wav *.inf files Issues: In the list there was an exchange of using the tool team for buffering vs cdrecord's own buffering scheme: "Another possibility, if you have the RAM, is to use the team(1) program
RE: How To Burn CDs
On 20-Aug-99 Amancio Hasty wrote: This is a summary of the information that I gather over the last few days with respect to CD recorders. It appears that the preferred and better supported CD recorders are scsi . To shorten the gap what is needed is for ATAPI cd recorders to be integrated into CAM so that we may present a unified interface to both ATAPI and SCSI CD drives. Post on -hackers if you are interested in working on such a project. The rest of this document will deal with scsi cd recorders. Software Tools : cdrecord is used to burn the CDs . cdrecord http home: http://www.fokus.gmd.de/research/cc/glone/employees/joerg.schilling/private/cd r ecord.htm cdrecord supports CD-R, CD-RW and Audio CD (Red Book) formants. cdda2wav which is now bundled with cdrecord can extract audio CD tracks. cdrecord is part of the ports/sysutils collection. toshais another scsi tool to extract CD audio tracks and it is in the ports/audio directory . tosha is native program to FreeBSD. tosha was written by Oliver Fromme [EMAIL PROTECTED] cdd another native freebsd program to extract CD audio tracks was written by Charles Henrich and is part of the ports/audio collection. mkisofs is used to create an iso 9660 cd image. It is located in the ports/sysutils collection If one of the audio "rippers" does not work report the problem after first making sure that the program does indeed support your CD disk unit and then just try another one. For a list of "reported to work" drives that work with cdrecord + cdd2wav see: http://www.fokus.gmd.de/research/cc/glone/employees/joerg.schilling/private/cd w riters-1.8.html External vs. Internal I find that my YAMAHA CRW6416sz scsi cd recorder runs rather cool . Some members on the list have reported that at least early models of their CD-Recorders run hot so they preferred to have them external due to the heat problem and/or portability . A little bit on cdrecord. To determine which scsi recorder is installed in your system issue: cdrecorder -scanbus Cdrecord release 1.8a22 Copyright (C) 1995-1999 Jörg Schilling scsibus0: 0) 'SEAGATE ' 'ST34501W' '0017' Disk 1) 'YAMAHA ' 'CRW6416S' '1.0b' Removable CD-ROM 2) * 3) 'SEAGATE ' 'ST15150W' '0023' Disk 4) * 5) * 6) * 7) * scsibus1: 100) * 101) * 102) * 103) * 104) * 105) 'UMAX' 'UMAX S-12 ' 'V2.0' Scanner 106) * 107) * So my Yamaha CD recorder is scsi bus 0 , scsi address 1, lun 0. I recommend sticking this information in /etc/default/record cat /etc/default/cdrecord CDR_DEVICE=1,0 What this means is that every time that cdrecord runs it gets is device info from /etc/default/cdrecord . If you feel somehow compel to always specify the scsi device in cdrecord, the syntax is: -dev=bus,scsi address, lun or -dev=scsi address, lun in my case is: -dev=1,0 (the default scsi bus is 0) I recommend for the first few times to use a CD-RW. They are more expensive than CD-R;however, for playing for the first time with your scsi cd recorder they can actually probably save you a lot of money. Now that you have all your hardware and software in place what can you do 8) To create an iso cd9660 with a CD-RW: mkisofs -R /mount/dir | cdrecord -blank=fast -v fs=6m speed=3 - mkisofs pipes an ISO 9660 cd image to cdrecord. cdrecord does the actual cd burning: -blank=fastfirst it does a quick blank -v verbose mode so you can see what is doing fs=6m forks a process and uses a 6MB buffer speed=3usually CD-RW can only be burned as fast as 4X you will have to experiment with your cd recorder to see what speed works best. Take a break pending upon the size of the image the process can take 1/2 hour to just a few minutes so kick back and relax. Here is session for creating audio cds. mkdir cdtracks cd cdtracks cddwa2wav -B This command generates tracks in the format of: audio_nn.wav where nn is a track number . audio in .wav format audio_nn.inf where nn is a track number . pregap info cdrecord -blank=fast -audio -useinfo audio*.wav -blank=fast blanks your CD-RW for CD-R don't include this command -audiosets audio cd recording -useinfo use the pregap info generated by cdd2wav *.inf files Issues: In the list
Re: How To Burn CDs
On Fri, Aug 20, 1999 at 01:04:47PM +0200, Werner Griessl wrote: # # Don't forget cdrdao, it's able to read and burn "video(cdi)"-cd's. # Successfully done here with a philips cdr2600 burner for a philips cdi player. # It's also in ports. From what I recall, tosha's been able to deal with vcd's as well, it's just they usually start from track 2. # Werner -- -mishania To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message