Re: [gentoo-ppc-user] Mac Mini PPC - Is this the right list?
On Thu, Apr 17, 2008 at 11:16 AM, Mark Knecht [EMAIL PROTECTED] wrote: SNIP Macintosh non-volatile memory driver v1.1 PCI: Enabling device :00:10.0 (0006 - 0007) radeonfb (:00:10.0): Invalid ROM signature 0 should be 0xaa55 radeonfb: Retrieved PLL infos from Open Firmware radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=190.00 Mhz, System=250.00 MHz radeonfb: PLL min 12000 max 35000 i2c-adapter i2c-2: unable to read EDID block. i2c-adapter i2c-2: unable to read EDID block. i2c-adapter i2c-2: unable to read EDID block. radeonfb: Monitor 1 type CRT found radeonfb: EDID probed radeonfb: Monitor 2 type CRT found radeonfb: EDID probed Console: switching to colour frame buffer device 90x25 radeonfb (:00:10.0): ATI Radeon Yb vga16fb: initializing vga16fb: mapped to 0x000a fb1: VGA16 VGA frame buffer device I rebooted with the install CD to look at the dmesg data when the monitor is set up and working correctly. There is one difference which is mode the frame buffer switched into: Macintosh non-volatile memory driver v1.1 PCI: Enabling device :00:10.0 (0006 - 0007) radeonfb (:00:10.0): Invalid ROM signature 0 should be 0xaa55 radeonfb: Retrieved PLL infos from Open Firmware radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=190.00 Mhz, System=250.00 MHz radeonfb: PLL min 12000 max 35000 i2c_adapter i2c-2: unable to read EDID block. i2c_adapter i2c-2: unable to read EDID block. i2c_adapter i2c-2: unable to read EDID block. radeonfb: Monitor 1 type CRT found radeonfb: EDID probed radeonfb: Monitor 2 type CRT found radeonfb: EDID probed Console: switching to colour frame buffer device 128x48 radeonfb (:00:10.0): ATI Radeon Yb vga16fb: initializing vga16fb: mapped to 0x000a fb1: VGA16 VGA frame buffer device - Mark -- gentoo-ppc-user@lists.gentoo.org mailing list
Re: [gentoo-ppc-user] Mac Mini PPC - Is this the right list?
OK, so I then booted from the hard drive and modified /etc/yaboot.conf like this: image=/boot/kernel-2.6.24-gentoo-r3 label=2.6.24-gentoo-r3 root=/dev/hda4 partition=4 append=video=radeonfb:[EMAIL PROTECTED] read-only Unfortunately when I reboot from the drive this time the monitor is not stable. Same bad screen I've been getting. i assume you ran ybin -v after you changed yaboot.conf ? also maybe try video=radeonfb:1024x768 without the bit depth or frequency Here's what I'm seeing in dmesg: vga16fb: initializing vga16fb: mapped to 0x000a fb1: VGA16 VGA frame buffer device i would remove vga from the kernel, its kinda useless ( at least will be once you figure the is out, right now it is being used as a fall back) So, why is it in a 720x400 mode? no idea A couple of other questions. I'm assuming the 'p' or 'i' in the mode names above are progressive vs. interlace? Should I be including that in how I describe the name in yaboot.conf? yes, i do believe that it is progressive and interlaced. you do not need to specify that in yaboot.conf Also, what are the S, V U at the start of each mode name? i found the file that explained that once, forgot where it is and wish i could remember! i want to know myself. matt -- gentoo-ppc-user@lists.gentoo.org mailing list
Re: [gentoo-user] Firefox: password field
On Wed, 16 Apr 2008 23:59:46 -0300 Norberto Bensa [EMAIL PROTECTED] wrote: Ubuntu patch indeed. For those interested: ... Thanks for the source overview -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] ck8s ethernet support in 2.6.23-r6 kernel
On Wed, 16 Apr 2008 18:56:16 -0700 (PDT), maxim wexler wrote: Never was a card. This is an on-board ethernet, just as previously. More background: this is a new mobo and new video card but the same cpu. And the same installation? So as far as the system is concerned, you have changed the network card (on-board cards appear as PCI devices). Somehow, the OS(udev?) still thinks it's using the old ethernet plus the new one...guessing here. No, it thinks you have changed the card, and eth0 was allocated to the old card. Hopefully that's the fix. Should know next boot. But doesn't expdefault to eth0?lain(at least to me) why eth0 is now defunct. If all I have is one ethernet port, doesn't that default to eth0? Yes, but then udev sees that eth0 is already allocated to another card so makes this one eth1. Just delete the file as mentioned previously to have udev forget about the old card and start again with eth0. -- Neil Bothwick Accept that some days you're the pigeon, and some days you're the statue. signature.asc Description: PGP signature
Re: [gentoo-user] Re: Daft colours in knode
On Wednesday 16 April 2008 10:29:09 Michael Schmarck wrote: Peter Humphrey [EMAIL PROTECTED] wrote: I've just installed knode to see how Usenet has changed since I first used it 15 years ago, and I'm astonished to find that the default colours include white text on a white background for read threads and articles. That's not the default. The default is a bright grey (on a white background or whatever you have - background isn't set in Knode). Well I haven't changed it, and that's what shows up here. ... here something good was going on in the mind of the Knode guys. It would be good if knode and kmail developers could get together and agree an interface design, such as which keys do which kinds of navigation. The two programs are after all strikingly similar in function. Is there a simple way of copying the colours from kmail to knode, or do I have to do it laboriously? -- Rgds Peter -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] {OT} Overclocked CPU killed motherboard and CD?
On Mittwoch, 16. April 2008, Eric Martin wrote: Roy Wright wrote: | Grant wrote: | An oc'ed cpu needs a lot more powergenerates a lot more heat. Both can damage | the CPU AND the mobo (too much power might fry a regulator, or cook a cap). | Or it might overload the PSU - and then everything is possible. A damaged | mobo or psu can take a lot of stuff with it to hell. | | I hope you learnt your lesson: Overclocking is evil | | I'll never overclock again. I'm realizing how much more important | reliability is compared to performance and low cost. | | - Grant | | That's been my thoughts until recently. I just built a system using a | Q9300 (45nm quad core) and decided to give OC a try. Bumped the clock | from 333MHz to 400MHz causing the CPU freq to increase from 2.5MHz to | 3.0MHz. DDR2-800 memory not OC'ed. Core temps under 4 core 100% load | using burnP5 only increased from 71C to 73C. This was with stock Intel | heat sink/fan/thermal paste (just the way Intel wants it). I just | ordered a XIGMATEK HDT-S1283 to lower these. | | IMO, it looks like the Intel 45nm processors have some easy OC headroom. | | YMMV. | | Have fun, | Roy This may be untrue, but from what I've see that's the way it goes w/OC'ing; Intels have room to be overclocked and AMDs don't. The OP overclocked an AMD processor which I've always heard is a bad idea. no, oc'ing is always a bad idea. And for the young ones: some years ago, overclocking klilled masses of P4 cpus thanks to electro migration. Don't oc. Its not worth the risks (silent data corruption, damage). -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] [Fwd: Returned mail: User unknown] another dead email address
On Mittwoch, 16. April 2008, Eric Martin wrote: Has anybody else who recently posted to the list gotten an email bounce for a [EMAIL PROTECTED] yes -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] {OT} Overclocked CPU killed motherboard and CD?
Overclocking when done properly, is very safe. There are TONS of sites out there to help with the research. And there are an equal ammount of hardware that can safely support Overclocking. So word from the wise (trial and error wise), take your time, do your research and always take baby steps. no, oc'ing is always a bad idea. And for the young ones: some years ago, overclocking klilled masses of P4 cpus thanks to electro migration. Don't oc. Its not worth the risks (silent data corruption, damage). Statements like this, bleed miseducation. Not every peice of hardware is OC'able. You *must* research the parts in question. It's almost always a safe bet to OC three things in very small increments. Motherboard, CPU and RAM. If all these can't talk to each other at the same speed, then you are dead in the water. No point in continueing. GPU's are independant of the system as far as Overclockcing goes, so if the GPU supports it, you can safely OC that. I would hedge my bets though and make sure my AGP/PCIe slot has speed-based room to move around in. That being said, for example, OC'ing an AGP 4x card to 8X speeds, if you want it to work, you still have to have an 8x AGP Slot.. -- gentoo-user@lists.gentoo.org mailing list
[gentoo-user] Re: OT: envelop printing
Peter Ruskin peter.ruskin at dsl.pipex.com writes: Open Office can do all that. I already tried that, so I must be missing some info ? james -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] {OT} Overclocked CPU killed motherboard and CD?
On Wed, Apr 9, 2008 at 1:58 AM, Grant [EMAIL PROTECTED] wrote: I received my RMAed motherboard back from MSI today, and although it powered right on, the BIOS wouldn't post unless I disconnected the CDROM drive and used a different CPU. I had been overclocking an AMD64 X2 but luckily I had a Sempron to test with. Does this sound like a case of an overclocked CPU burning out and taking a couple of devices with it, or is it more likely that the motherboard died and took a couple devices with it, or something else? IIRC, most RMA'd hardware isn't 'repaired' in the technical sense. You're typically given a new motherboard. In my experience, overclocking typically doesn't damage unrelated components. The CPU is likely the only problem with your rig, unfortunately. -- Dan Cowsill http://www.danthehat.net -- gentoo-user@lists.gentoo.org mailing list
[gentoo-user] baselayout-2.0.0 surprises
Hi, after upgrading to baselayout-2.0.0 ( and openrc ) I've got some unpleasant surprises. Is there an upgrade guide anywhere ? Maybe some problems are causes by myself (accidently) /etc/conf.d/rc seems to have gone (now /etc/rc.conf ?) /etc/conf.d/net seems to have gone this inhibited my network after reboot Has it really gone or did I delete by accident ? After I have replaced /etc/conf.d/net from a backup the network came up on the next boot. While the init scripts is running, I get the following messages never seen before - cruft in proc - net.ppp0 not under our control, aborting Fortunately it didn't abort my ppp connection (otherwise there wouldn't been this email) Are there more problems to be expected? Many thanks for your help, Helmut Jarausch Lehrstuhl fuer Numerische Mathematik RWTH - Aachen University D 52056 Aachen, Germany -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] {OT} Overclocked CPU killed motherboard and CD?
On Donnerstag, 17. April 2008, Chris Brennan wrote: Overclocking when done properly, is very safe. There are TONS of sites out there to help with the research. I know that sites. And a lot of ocing results in strange and hidden problems. Add to that my hatred for people RMA'ing boards until they got a good overclocker - thus increasing hardware prices for everybody. no, oc'ing is always a bad idea. And for the young ones: some years ago, overclocking klilled masses of P4 cpus thanks to electro migration. Don't oc. Its not worth the risks (silent data corruption, damage). Statements like this, bleed miseducation. no, they don't. They are just the unpleasant truth. That being said, for example, OC'ing an AGP 4x card to 8X speeds, if you want it to work, you still have to have an 8x AGP Slot.. you don't know anything about AGP, do you? -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] baselayout-2.0.0 surprises
On Thu, 17 Apr 2008 16:03:09 +0200 (CEST), Helmut Jarausch wrote: after upgrading to baselayout-2.0.0 ( and openrc ) I've got some unpleasant surprises. Because you didn't read the elog messages. Is there an upgrade guide anywhere ? Yes, and emerge tells you to read it: You should now update all files in /etc, using etc-update or equivalent before restarting any services or this host. Please read the migration guide available at: http://www.gentoo.org/doc/en/openrc-migration.xml -- Neil Bothwick We are THOR of Borg... your RFC compliant mailbox has been assimilated signature.asc Description: PGP signature
Re: [gentoo-user] baselayout-2.0.0 surprises
On 4/17/08, Helmut Jarausch [EMAIL PROTECTED] wrote: Hi, after upgrading to baselayout-2.0.0 ( and openrc ) I've got some unpleasant surprises. Is there an upgrade guide anywhere ? Maybe some problems are causes by myself (accidently) /etc/conf.d/rc seems to have gone (now /etc/rc.conf ?) /etc/conf.d/net seems to have gone this inhibited my network after reboot Has it really gone or did I delete by accident ? After I have replaced /etc/conf.d/net from a backup the network came up on the next boot. While the init scripts is running, I get the following messages never seen before - cruft in proc - net.ppp0 not under our control, aborting Fortunately it didn't abort my ppp connection (otherwise there wouldn't been this email) Are there more problems to be expected? Many thanks for your help, Helmut Jarausch Lehrstuhl fuer Numerische Mathematik RWTH - Aachen University D 52056 Aachen, Germany -- gentoo-user@lists.gentoo.org mailing list Hello, The migration guide is here: http://www.gentoo.org/doc/en/openrc-migration.xml I think it will help you solve your problems. -- Andrés
Re: [gentoo-user] baselayout-2.0.0 surprises
On 16:03 Thu 17 Apr , Helmut Jarausch wrote: Hi, after upgrading to baselayout-2.0.0 ( and openrc ) I've got some unpleasant surprises. Is there an upgrade guide anywhere ? Maybe some problems are causes by myself (accidently) /etc/conf.d/rc seems to have gone (now /etc/rc.conf ?) /etc/conf.d/net seems to have gone this inhibited my network after reboot Has it really gone or did I delete by accident ? After I have replaced /etc/conf.d/net from a backup the network came up on the next boot. While the init scripts is running, I get the following messages never seen before - cruft in proc - net.ppp0 not under our control, aborting Fortunately it didn't abort my ppp connection (otherwise there wouldn't been this email) Are there more problems to be expected? Many thanks for your help, Helmut Jarausch Lehrstuhl fuer Numerische Mathematik RWTH - Aachen University D 52056 Aachen, Germany -- gentoo-user@lists.gentoo.org mailing list There is also a thread discussing the new baselayout. -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] baselayout-2.0.0 surprises
On Donnerstag, 17. April 2008, Neil Bothwick wrote: On Thu, 17 Apr 2008 16:03:09 +0200 (CEST), Helmut Jarausch wrote: after upgrading to baselayout-2.0.0 ( and openrc ) I've got some unpleasant surprises. Because you didn't read the elog messages. it is still not ok to remove /etc/conf.d/net. That is extremly stupid. Oh, and another stupid think. fsck runs with the -p option. -p for prune. But xfs does not now the -p option and reiser4 lists all plugins. The smart thing would be changing -p to -a - but our beloved devs don't like intelligent solutions, instead there are patches for xfs and reiser4progs - which are not in the tree - fucking up systems with these fs. Really intelligent. -- gentoo-user@lists.gentoo.org mailing list
[gentoo-user] you have cruft in /proc remove it
Hi, does anybody know where the message you have cruft in /proc remove it comes from and what to do about it. (It seems to be new with baselayout-2.0.0/openrc but it's not mentioned in the upgrade guide) Many thanks for a hint, Helmut Jarausch Lehrstuhl fuer Numerische Mathematik RWTH - Aachen University D 52056 Aachen, Germany -- gentoo-user@lists.gentoo.org mailing list
[gentoo-user] WARNING: net.ppp0 not under our control, aborting
Hi, on boot I get (with baselayout-2.0.0/openrc) the message * Bringing up interface ppp0 * Starting pppd in ppp0 ... [ ok ] * received address 87.67.162.56 * WARNING: net.ppp0 not under our control, aborting What does that mean and what can I do about it? I think I've followed the baselayout upgrade guide. Many thanks for a hint, Helmut Jarausch Lehrstuhl fuer Numerische Mathematik RWTH - Aachen University D 52056 Aachen, Germany -- gentoo-user@lists.gentoo.org mailing list
[gentoo-user] Encrypted backups under Gentoo
As per the subject: I use luks-crypt to encrypt my home directory. Of course I would like to make backups. These must, of course, also be encrypted. I have tried duplicity, but when many changes have occured, this is unbearably slow (being on a laptop). What would be the best solution to back up with encryption barring duplicity? Regards, Jan Seeger -- gentoo-user@lists.gentoo.org mailing list
[gentoo-user] mesa / 3d driver for openchrome
Hi folks, according to the mesa web site, mesa-7.0.2 contains a 3d driver for openchrome. Unfortunately, the ebuild knows only about a very limited number of video cards, openchrome not amoung them. How can I convince it to compile the openchrome 3d driver? Uwe -- Informal Linux Group Namibia: http://www.linux.org.na/ SysEx (Pty) Ltd.: http://www.SysEx.com.na/ -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] [Fwd: Returned mail: User unknown] another dead email address
Volker Armin Hemmann wrote: On Mittwoch, 16. April 2008, Eric Martin wrote: Has anybody else who recently posted to the list gotten an email bounce for a [EMAIL PROTECTED] yes Here to, so +1. Dale :-) :-) -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Encrypted backups under Gentoo
On Thu, 2008-04-17 at 17:54 +0200, Jan Seeger wrote: As per the subject: I use luks-crypt to encrypt my home directory. Of course I would like to make backups. These must, of course, also be encrypted. I have tried duplicity, but when many changes have occured, this is unbearably slow (being on a laptop). What would be the best solution to back up with encryption barring duplicity? Regards, Jan Seeger I personally use dar and gpg. Dar can be used to make incremental backups which should partly solve your speed problem. Alternatively you could use tar and gpg or cpio or whatever floats your boat. The alternative would be an encrypted filesystem and rdiff-backup or rsync. Optionally you could safe the key to the filesystem on your home partition or, if it doesn't need to be automated, in a gpg-encrypted file. Let me know if you are interested in any of these options so I can explain the details further (if you need support with that, that is). signature.asc Description: This is a digitally signed message part
Re: [gentoo-user] baselayout-2.0.0 surprises
Am Donnerstag, den 17.04.2008, 17:23 +0200 schrieb Volker Armin Hemmann: fsck runs with the -p option. -p for prune. But xfs does not now the -p option Just set fsck to 0 in fstab for xfs volumes. Bye... Dirk signature.asc Description: Dies ist ein digital signierter Nachrichtenteil
[gentoo-user] OT Best font selection?
Hello everyone, Although perfectly aware that this is a much subjective business, I am looking for best fonts, and would much appreciate your sharing of personal choices. This Wiki article [1] has some insight, but not sufficient to satisfy my quest. For best printed output I have settled for either Computer Modern or Palatino, through LyX (LaTeX). For Terminal I am quite happy with Terminus. But I am not very satisfied with the User Interface font. I am currently using Verdana size 8, under Xfce, with anti-aliasing enabled. However, I would much like to use a high-quality LCD display font, that would look good with anti-aliasing disabled (I already have -bindist for media-libs/freetype). So, what font do you use for the User Interface? Thank you in advance, Liviu [1] http://gentoo-wiki.com/HOWTO_Xorg_and_Fonts#Emerging_the_necessary_packages -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] baselayout-2.0.0 surprises
On Thu, 17 Apr 2008 17:23:18 +0200, Volker Armin Hemmann wrote: Because you didn't read the elog messages. it is still not ok to remove /etc/conf.d/net. That is extremly stupid. It would be, but it wasn't removed on any of the three machines I upgraded. /etc/init.d/net.eth0 was removed on all of them, but that is documented in the upgrade guide. -- Neil Bothwick I need your clothes, your boots, and your tagline! signature.asc Description: PGP signature
Re: [gentoo-user] Encrypted backups under Gentoo
On Thu, 17 Apr 2008 17:54:50 +0200, Jan Seeger wrote: I use luks-crypt to encrypt my home directory. Of course I would like to make backups. These must, of course, also be encrypted. I have tried duplicity, but when many changes have occured, this is unbearably slow (being on a laptop). What would be the best solution to back up with encryption barring duplicity? I'm using duplicity and also found it slow, and it makes thousands of SSH connections in the course of a day. I'm now testing app-backup/boxbackup, which seems good so far. -- Neil Bothwick The road to HAL is paved with good intentions. signature.asc Description: PGP signature
Re: [gentoo-user] OT Best font selection?
quoth the Liviu Andronic: So, what font do you use for the User Interface? Happy with Bitstream Vera Sans myself. Clean, clear, and looks good. For fixed I use Courier 10-pitch. -d -- darren kirby :: Part of the problem since 1976 :: http://badcomputer.org ...the number of UNIX installations has grown to 10, with more expected... - Dennis Ritchie and Ken Thompson, June 1972 -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Encrypted backups under Gentoo
At Thu, 17 Apr 2008 19:16:54 +0200, Florian Philipp wrote: I personally use dar and gpg. Dar can be used to make incremental backups which should partly solve your speed problem. Alternatively you could use tar and gpg or cpio or whatever floats your boat. Duplicity also does incremental backups, but it's still slow. Using dar, would I have to manually (or per script) use gpg to encrypt the archives? The alternative would be an encrypted filesystem and rdiff-backup or rsync. Optionally you could safe the key to the filesystem on your home partition or, if it doesn't need to be automated, in a gpg-encrypted file. An encryted filesystem and rdiff-backup or similar was another option I though of. The problem is restoration: Would I easily be able to restore the backups from a freshly installed system? Regards, Jan -- gentoo-user@lists.gentoo.org mailing list
[gentoo-user] udev and baselayout2
Hi guys, to which udev version should be upgraded for the baselayout2? Thanks, justin signature.asc Description: OpenPGP digital signature
Re: [gentoo-user] baselayout-2.0.0 surprises
On Donnerstag, 17. April 2008, Dirk Heinrichs wrote: Am Donnerstag, den 17.04.2008, 17:23 +0200 schrieb Volker Armin Hemmann: fsck runs with the -p option. -p for prune. But xfs does not now the -p option Just set fsck to 0 in fstab for xfs volumes. Bye... Dirk no, the thing is, -p for 'automatic checkrepair' is just wrong. -a would be better. Because -a is understood by a lot more fscks. -p as prune/automatic repair is only understood by ext2/3 and reiserfsck. -a is there for a reason. A good one. -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Encrypted backups under Gentoo
-BEGIN PGP SIGNED MESSAGE- Hash: SHA512 Florian Philipp wrote: | On Thu, 2008-04-17 at 17:54 +0200, Jan Seeger wrote: | As per the subject: | | I use luks-crypt to encrypt my home directory. Of course I would like | to make backups. These must, of course, also be encrypted. I have | tried duplicity, but when many changes have occured, this is | unbearably slow (being on a laptop). What would be the best solution | to back up with encryption barring duplicity? | | Regards, | Jan Seeger | | I personally use dar and gpg. Dar can be used to make incremental | backups which should partly solve your speed problem. Alternatively you | could use tar and gpg or cpio or whatever floats your boat. | | The alternative would be an encrypted filesystem and rdiff-backup or | rsync. Optionally you could safe the key to the filesystem on your home | partition or, if it doesn't need to be automated, in a gpg-encrypted | file. | | Let me know if you are interested in any of these options so I can | explain the details further (if you need support with that, that is). I also use dar, but I don't bother with gpg. I use the '-K:' option of dar, which provides passphrase protected blowfish protection. I suppose I could use gpg, as well, with AES256 or IDEA, but that would be overkill, I think, since I keep my backups on an external USB port drive. Chris -BEGIN PGP SIGNATURE- iQIcBAEBCgAGBQJIB5j7AAoJEIAhA8M9p9DA+ccP/AqbWUYZMc76kiRa1nqL1A81 rDqrTomadkHoyqCgl0sXwmz85kEzgV33QP/yqrnSwAXQisDgvyQ9v8INOGff1p7D e2Rw3U+31/U+xz1dMYTS8ucLKLKwMkU1m9+iIkRBbPDJPTVyUzup33RoV8Bt00oF 5241fYPhJQsLd/zwiYsUk6w7NO+4xyW7x9n2FXbOKZGuwSNT+0mVwXX/fDlvXhJJ awkQMAfpv2vVQ5Y5+ovlhawECU/mv1BxOTrYB9M0jViT9ugKcoJEhJyONLra0LBL 1dwy/6g5PB+4RB/xKXZqJdO02gp7vqf3H2rlA6qcj+O0/b8gK5Jl1/QP2duzdgL5 XbChyiVfF5KTEB9EgAUuhrIMr+At5rinxFQmu0S8ohgoHRakFXAIhv7+DX6rkKJD Y5Jf8X6sV+Flqac4dD9znmb98RgcbVTEyHLLKKPrvZ2mcEhRCw6I+HXcnYvFQV57 xEXbYEkKTXHlb6OFWOSC/ynvhw87mBz+Zjx0trm61awrgYBBgYoSBJk3nemjtL9e 0yslvgzMOClTjSlC9lgnCmiQDQNgFFgIUHSmrt/yfQ69jrluii7hvWJfRfFsu9i1 5wOnzOt5fI1sTxOoX9yMEXK+PjEgncdBVPMMF+dMvan4vyxGpAPwgzQSedgWPbgI dwBz2ugEZAAsV0EszSQS =mGmy -END PGP SIGNATURE- -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] baselayout-2.0.0 surprises
Am Donnerstag, den 17.04.2008, 20:36 +0200 schrieb Volker Armin Hemmann: On Donnerstag, 17. April 2008, Dirk Heinrichs wrote: Am Donnerstag, den 17.04.2008, 17:23 +0200 schrieb Volker Armin Hemmann: fsck runs with the -p option. -p for prune. But xfs does not now the -p option Just set fsck to 0 in fstab for xfs volumes. no, the thing is, -p for 'automatic checkrepair' is just wrong. -a would be better. Because -a is understood by a lot more fscks. -p as prune/automatic repair is only understood by ext2/3 and reiserfsck. -a is there for a reason. A good one. Both of them have no effect on fsck.xfs, because no matter what options you give to a dummy, it will stay a dummy. Bye... Dirk signature.asc Description: Dies ist ein digital signierter Nachrichtenteil
Re: [gentoo-user] baselayout-2.0.0 surprises
Am Donnerstag, den 17.04.2008, 20:36 +0200 schrieb Volker Armin Hemmann: On Donnerstag, 17. April 2008, Dirk Heinrichs wrote: Am Donnerstag, den 17.04.2008, 17:23 +0200 schrieb Volker Armin Hemmann: fsck runs with the -p option. -p for prune. But xfs does not now the -p option Just set fsck to 0 in fstab for xfs volumes. no, the thing is, -p for 'automatic checkrepair' is just wrong. -a would be better. Because -a is understood by a lot more fscks. -p as prune/automatic repair is only understood by ext2/3 and reiserfsck. -a is there for a reason. A good one. Not using fsck for xfs also has a reason. A good one. From man fsck.xfs: XFS is a journaling filesystem and performs recovery at mount(8) time if necessary, so fsck.xfs simply exits with a zero exit status. So whatever option you give to it, it doesn't matter. Bye... Dirk signature.asc Description: Dies ist ein digital signierter Nachrichtenteil
[gentoo-user] Re: Encrypted backups under Gentoo
Neil Bothwick wrote: I'm now testing app-backup/boxbackup, which seems good so far. Please report your findings on the list! I'm not all too happy about my current solution (rdiff-backup locally to a filesystem over dmcrypt, loopback-mounted from a file, followed by an rsync over ssh to a remote host), and I'd be happy to find something better! -- Remy signature.asc Description: OpenPGP digital signature
Re: [gentoo-user] Encrypted backups under Gentoo
At Thu, 17 Apr 2008 14:37:52 -0400, Chris Walters wrote: I also use dar, but I don't bother with gpg. I use the '-K:' option of dar, which provides passphrase protected blowfish protection. I suppose I could use gpg, as well, with AES256 or IDEA, but that would be overkill, I think, since I keep my backups on an external USB port drive. This sounds like a feasible solution, I will try it out. Thanks for the idea, Florian and Chris. I'm just wondering what the dar64 and dar32 useflags do... -- gentoo-user@lists.gentoo.org mailing list
[gentoo-user] Re: baselayout-2.0.0 surprises
· Neil Bothwick [EMAIL PROTECTED]: On Thu, 17 Apr 2008 17:23:18 +0200, Volker Armin Hemmann wrote: Because you didn't read the elog messages. it is still not ok to remove /etc/conf.d/net. That is extremly stupid. It would be, but it wasn't removed on any of the three machines I upgraded. Armin has at least one machine and I've got 2 were this happened and there are reports in the forum discussion thread reg. disappearance of /etc/conf.d/net (or rather, that it was replaced with a basically blank default file). So, I think, that your system is a bit odd. Michael Schmarck -- Turn on, tune up, rock out. -- Billy Gibbons -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Encrypted backups under Gentoo
-BEGIN PGP SIGNED MESSAGE- Hash: SHA512 Jan Seeger wrote: | At Thu, 17 Apr 2008 14:37:52 -0400, | Chris Walters wrote: snip | This sounds like a feasible solution, I will try it out. Thanks for | the idea, Florian and Chris. | | I'm just wondering what the dar64 and dar32 useflags do... As I understand it, dar32 uses 32 bit integers and dar64 uses 64 bit integers, I believe to represent file and archive sizes. The description on the the USE flag dar64 on the Gentoo site says, Enables --enable-mode=64 option, which replace infinint by 64 bits integers. The dar32 option is described in the same way, only with 32 replacing 64. Regards, Chris -BEGIN PGP SIGNATURE- iQIcBAEBCgAGBQJIB6nGAAoJEIAhA8M9p9DAfPMP/RsttxEQmsX1EF0Ztilhkxox dRHX+h5A723LGDgs0eDCG32qn+PMFpFzpRaYlT6k/zk82QwVXcBzDaPse9/REzch eze1sItugrts5tB+j8VosNC9w7EvtvHq4R3cD56OoJ4xz0C7ywdUQvO2eTUJ7z8s QklhRcY3flb4UIiVD/RmcB7TjY5mnJ9y4HqYq1pjgZxeAGWztJlXnQQbcO1tFST8 x8C2rgkT8A9LcyNm/leyQHmU6leys9flGWrr6q4g26Qvf9dPimPn0BnbPROmGEhJ +eF3UFqR/ir4+JSeiDFzS0XuPN3id3C3n90qWawPeWEbmCnGazAepvH/P68hkPRV bSb9ehhLwE2OjsiQg66zWKB3ZnVYKK+8MglddZUtGfAKVhxr53gbqhVolzZ0cE5a pLbAz9zPoMfkQewQJux+ECoAwFRuOeV29wRXDuvb4sxTWN/Z3rvPFDvPgPjBClK1 uV1gKFRfE93N6NBAPkJHF8UlBjVN+LY4kqWmgFMjU3SnRBkw1HjwLMeaWh3qGdkC R39i3GvE57M8X6YXOyFf2WtxDRzzLcyv/a1DvkVbr0uGVZAjkePgnldzCj5snoIw +xY+3H9Y0MydrjuohdlrWj0davI+tG0lfM/FuV3e7Zl/zxYHr8QFWzYx8hgf3UUJ +Om6MbxFsyo59mxF56W5 =758z -END PGP SIGNATURE- -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Re: baselayout-2.0.0 surprises
Michael Schmarck schrieb: · Neil Bothwick [EMAIL PROTECTED]: On Thu, 17 Apr 2008 17:23:18 +0200, Volker Armin Hemmann wrote: Because you didn't read the elog messages. it is still not ok to remove /etc/conf.d/net. That is extremly stupid. It would be, but it wasn't removed on any of the three machines I upgraded. Armin has at least one machine and I've got 2 were this happened and there are reports in the forum discussion thread reg. disappearance of /etc/conf.d/net (or rather, that it was replaced with a basically blank default file). So, I think, that your system is a bit odd. Michael Schmarck http://sources.gentoo.org/viewcvs.py/gentoo-x86/sys-apps/baselayout/baselayout-2.0.0.ebuild?r1=1.2r2=1.3 -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Re: baselayout-2.0.0 surprises
On Thu, 17 Apr 2008 21:45:53 +0200, Michael Schmarck wrote: It would be, but it wasn't removed on any of the three machines I upgraded. Armin has at least one machine and I've got 2 were this happened and there are reports in the forum discussion thread reg. disappearance of /etc/conf.d/net (or rather, that it was replaced with a basically blank default file). So, I think, that your system is a bit odd. Maybe I should have specified that the three machines all have very different setups. -- Neil Bothwick It's not a bug, it's tradition! signature.asc Description: PGP signature
Re: [gentoo-user] Re: Encrypted backups under Gentoo
On Thu, 17 Apr 2008 20:57:47 +0200, Remy Blank wrote: I'm now testing app-backup/boxbackup, which seems good so far. Please report your findings on the list! I'm not all too happy about my current solution (rdiff-backup locally to a filesystem over dmcrypt, loopback-mounted from a file, followed by an rsync over ssh to a remote host), and I'd be happy to find something better! I'm currently using it with a local server. If I decide to use the backups on a remote server too, I'll probably stick to backing up to the local server and then using rsync. It makes sense to have a copy of the backup locally and only use the much slower option of restoring from a remote host when absolutely necessary. -- Neil Bothwick Top Oxymorons Number 36: Alone together signature.asc Description: PGP signature
Re: [gentoo-user] Re: baselayout-2.0.0 surprises
On Donnerstag, 17. April 2008, Daniel Pielmeier wrote: http://sources.gentoo.org/viewcvs.py/gentoo-x86/sys-apps/baselayout/baselay out-2.0.0.ebuild?r1=1.2r2=1.3 oh great, changes without a rX bump. I hate that. -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] baselayout-2.0.0 surprises
On Donnerstag, 17. April 2008, Dirk Heinrichs wrote: Am Donnerstag, den 17.04.2008, 20:36 +0200 schrieb Volker Armin Hemmann: On Donnerstag, 17. April 2008, Dirk Heinrichs wrote: Am Donnerstag, den 17.04.2008, 17:23 +0200 schrieb Volker Armin Hemmann: fsck runs with the -p option. -p for prune. But xfs does not now the -p option Just set fsck to 0 in fstab for xfs volumes. no, the thing is, -p for 'automatic checkrepair' is just wrong. -a would be better. Because -a is understood by a lot more fscks. -p as prune/automatic repair is only understood by ext2/3 and reiserfsck. -a is there for a reason. A good one. Both of them have no effect on fsck.xfs, because no matter what options you give to a dummy, it will stay a dummy. Bye... Dirk yeah, xfs is double fucked ;) but there are more fs than xfs, reiser(fs/4) and ext2/3. If you look into man fsck you find -a but not -p. So no matter what, -a is wrong and patching the tools instead of just replacing a letter is IMHO stupiddangerous. -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] you have cruft in /proc remove it
Here's a useful discussioin: http://forums.gentoo.org/viewtopic-t-254197-postdays-0-postorder-asc-highlight-findcruft-start-50.html --- Helmut Jarausch [EMAIL PROTECTED] wrote: Hi, does anybody know where the message you have cruft in /proc remove it comes from and what to do about it. (It seems to be new with baselayout-2.0.0/openrc but it's not mentioned in the upgrade guide) Many thanks for a hint, Helmut Jarausch Lehrstuhl fuer Numerische Mathematik RWTH - Aachen University D 52056 Aachen, Germany -- gentoo-user@lists.gentoo.org mailing list Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Re: baselayout-2.0.0 surprises
Volker Armin Hemmann schrieb: On Donnerstag, 17. April 2008, Daniel Pielmeier wrote: http://sources.gentoo.org/viewcvs.py/gentoo-x86/sys-apps/baselayout/baselay out-2.0.0.ebuild?r1=1.2r2=1.3 oh great, changes without a rX bump. I hate that. No need for a rev bump here i guess! Anybody who runs into this will not benefit from a rev bump, as the files were gone and are not restored by the bump. Also this package is in ~arch and left package.mask recently, so it is under testing and you have to expect problems! I use openrc since it's first days in the openrc-overlay and migration went smooth! I had only problems after the transition were i was left with an unbootable system because of some bad changes in the git-repository of openrc, but this was resolvable with a live-cd. -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] you have cruft in /proc remove it
maxim wexler schrieb: Here's a useful discussioin: http://forums.gentoo.org/viewtopic-t-254197-postdays-0-postorder-asc-highlight-findcruft-start-50.html --- Helmut Jarausch [EMAIL PROTECTED] wrote: Hi, does anybody know where the message you have cruft in /proc remove it comes from and what to do about it. (It seems to be new with baselayout-2.0.0/openrc but it's not mentioned in the upgrade guide) Many thanks for a hint, Helmut Jarausch Lehrstuhl fuer Numerische Mathematik RWTH - Aachen University D 52056 Aachen, Germany -- gentoo-user@lists.gentoo.org mailing list First: Don't top post! Second: I don't think this is normal filesystem cruft like which is discussed in the forum. The proc (proc - Process information pseudo-filesystem) filesystem contains information about the state of your system and the running processes and there are no real files in it. The same goes for /dev (udev) /sys (sysfs). -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] you have cruft in /proc remove it
On Thu, 17 Apr 2008 23:24:20 +0200, Daniel Pielmeier wrote: Second: I don't think this is normal filesystem cruft like which is discussed in the forum. The proc (proc - Process information pseudo-filesystem) filesystem contains information about the state of your system and the running processes and there are no real files in it. Is the message referring to the proc filesystem or the /proc mount point before it is mounted? Do you see anything if you do mount --bind / /mnt/tmp ls -l /mnt/tmp/proc -- Neil Bothwick When companies ship Styrofoam, what do they pack it in? signature.asc Description: PGP signature
Re: [gentoo-user] you have cruft in /proc remove it
Neil Bothwick schrieb: On Thu, 17 Apr 2008 23:24:20 +0200, Daniel Pielmeier wrote: Second: I don't think this is normal filesystem cruft like which is discussed in the forum. The proc (proc - Process information pseudo-filesystem) filesystem contains information about the state of your system and the running processes and there are no real files in it. Is the message referring to the proc filesystem or the /proc mount point before it is mounted? Do you see anything if you do mount --bind / /mnt/tmp ls -l /mnt/tmp/proc No, i also scanned through /var/log/rc.log and do not have a single occurrence of message like this! -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] you have cruft in /proc remove it
First: Don't top post! Big whoop! The two posts are tiny -- it's easy to see at a glance which is the original and which the reply. Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] OT Best font selection?
That's not free, that's M$ stuff, but I'd suggest you to take a look, just take a look, at Segoe UI fonts. I Don't know any free fonts comparable to it, but there's a story of some guy who charged M$ for using his font as base for Segoe... I don't know if that font is free, or even if it exists, but it may be worth to take a look at =) If anyone knows a free font comparable to Segoe, I'd be pleased to be aware of =))) And terminus is so f*ck*ng awesome I'm actually using it as my interface font in xmonad =) On Thu, Apr 17, 2008 at 2:55 PM, darren kirby [EMAIL PROTECTED] wrote: quoth the Liviu Andronic: So, what font do you use for the User Interface? Happy with Bitstream Vera Sans myself. Clean, clear, and looks good. For fixed I use Courier 10-pitch. -d -- darren kirby :: Part of the problem since 1976 :: http://badcomputer.org ...the number of UNIX installations has grown to 10, with more expected... - Dennis Ritchie and Ken Thompson, June 1972 -- gentoo-user@lists.gentoo.org mailing list -- Gustavo Campos Ciência da Computação / Computer Science - UFMG -- gentoo-user@lists.gentoo.org mailing list
Top posting (Was Re: [gentoo-user] you have cruft in /proc remove it)
maxim wexler schrieb: First: Don't top post! Big whoop! The two posts are tiny -- it's easy to see at a glance which is the original and which the reply. Irrelevant! I answered you below, what happens when you answer again on the top, and so on? Answer5 Answer3 Answer1 Question Answer2 Answer4 Answer6 Should i continue? Even if the answers are tiny, when someone reads this after a while he will get easily confused by this mess! Thanks, Daniel -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] udev and baselayout2
Justin schrieb: to which udev version should be upgraded for the baselayout2? Openrc requires sys-fs/udev-118-r2. As far as i know udev-120 is going to be stabilized with openrc/baselayout-2 which I use too. Didn't have any problems so far! Regards, Daniel -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] OT Best font selection?
080417 Liviu Andronic wrote: Although perfectly aware that this is a much subjective business, ... Very much so ! ... I am looking for best fonts and would much appreciate your sharing of personal choices. I like New Century Schoolbook for variable spacing, with URW Palladio as a good alternative; for fixed spaces, Luxi Mono. HTH -- ,, SUPPORT ___//___, Philip Webb : [EMAIL PROTECTED] ELECTRIC /] [] [] [] [] []| Centre for Urban Community Studies TRANSIT`-O--O---' University of Toronto -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Sound jack isolations
On Tue, 2008-01-29 at 21:11 -0500, Richard Marzan wrote: On Tuesday 29 January 2008, Marzan, Richard non Unisys wrote: I tried googling around but no helpful content so far. I have a laptop with built-in sound. It uses the HDA_intel kernel module. My problem is that I can't silence the onboard/built-in speakers when I plug in the headphones to the machine. Muting sound would lead to all jacks and audio ports to be silenced -- not just the built-in speakers, which I intend to mute solely leaving sound alive on the headphone jacks. There are no channels readily observable to differentiate where sound goes and to which port with alsa-mixer. The behavior I would like to achieve is one that will allow me to mute onboard speakers while continuing to have the headphones receive audio signals. Has anyone ever done this? Any pointers to documentation will be appreciated. Is it a Dell with an ICH8 chipset? This is a well known bug and is fixed in alsa-1.0.15. I have this same problem on my Dell D830 which runs Gentoo and Ubuntu. On Ubuntu I use a backported kernel and 'options snd-hda-intel model=dell-m42' in /etc/modprobe.d/alsa-base There was someone who asked for me to keep him or her updated with this effort and this is why I'm posting back to the post with this info. Well, a few months later and sound jack sound isolation issue is corrected. Upgrade to ALSA-DRIVER 1.0.16 and you should be fine. You might have to unmask it. Sound now ceases to emanate from my speakers when headphones are plugged into my laptop (HP dv6645us). All thanks to Tobin Davis and the alsa-project and a surprise from emerge --sync emerge -uDNtv world Here is my output from the alsa-info shell script, I hope this helps someone out: http://pastebin.ca/988978 -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Re: baselayout-2.0.0 surprises
On Donnerstag, 17. April 2008, Daniel Pielmeier wrote: Volker Armin Hemmann schrieb: On Donnerstag, 17. April 2008, Daniel Pielmeier wrote: http://sources.gentoo.org/viewcvs.py/gentoo-x86/sys-apps/baselayout/base lay out-2.0.0.ebuild?r1=1.2r2=1.3 oh great, changes without a rX bump. I hate that. No need for a rev bump here i guess! Anybody who runs into this will not benefit from a rev bump, as the files were gone and are not restored by the bump. yes, need for a rev bump. If one person has a problem and another person does not have the problem, it is helpfull to be able to determine the exact version of the packet installed. Not bumping revs makes that harder. -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Re: baselayout-2.0.0 surprises
On Donnerstag, 17. April 2008, Daniel Pielmeier wrote: Also this package is in ~arch and left package.mask recently, so it is under testing and you have to expect problems! problems, yes. The nuking of important config files and non-boot: no. That is complety inacceptable for something that is not package.masked. Especially in the second case where a simple replace of a single letter could have avoided them. That the problem is known since Octobre does not make that better in any way. -- gentoo-user@lists.gentoo.org mailing list
[gentoo-user] Unmerged coreutils + mktemp; can't emerge anymore
I assume I'll have to download some gentoo system binaries. Can
someone point me to what I need?
Here's what happened. I did a regular emerge --sync and then tried
an update. There seemed to be a circular blockage involving both
coreutils and mktemp. As I've done in similar situations in the past, I
removed the blocking packages and re-tried emerge. Apparently, I
unmerged something vital. Emerge dies like so...
==
* checking ebuild checksums ;-) ...
* [ ok ] * checking auxfile checksums ;-) ...
* [ ok ] * checking miscfile checksums ;-) ...
* [ ok ] * checking alsa-driver-1.0.16.tar.bz2 ;-) ...
* [ ok ]Traceback (most recent call last):
File /usr/bin/emerge, line 6971, in ?
retval = emerge_main()
File /usr/bin/emerge, line 6965, in emerge_main
myopts, myaction, myfiles, spinner)
File /usr/bin/emerge, line 6339, in action_build
retval = mergetask.merge(
File /usr/bin/emerge, line 3981, in merge
return self._merge(mylist, favorites, mtimedb)
File /usr/bin/emerge, line 4259, in _merge
prev_mtimes=ldpath_mtimes)
File /usr/lib/portage/pym/portage.py, line 4806, in doebuild
alwaysdep=1, logfile=logfile)
File /usr/lib/portage/pym/portage.py, line 3705, in spawnebuild
retval=spawnebuild(actionmap[mydo][dep],actionmap,mysettings,debug,alwaysdep=alwaysdep,logfile=logfile)
File /usr/lib/portage/pym/portage.py, line 3705, in spawnebuild
retval=spawnebuild(actionmap[mydo][dep],actionmap,mysettings,debug,alwaysdep=alwaysdep,logfile=logfile)
File /usr/lib/portage/pym/portage.py, line 3705, in spawnebuild
retval=spawnebuild(actionmap[mydo][dep],actionmap,mysettings,debug,alwaysdep=alwaysdep,logfile=logfile)
File /usr/lib/portage/pym/portage.py, line 3705, in spawnebuild
retval=spawnebuild(actionmap[mydo][dep],actionmap,mysettings,debug,alwaysdep=alwaysdep,logfile=logfile)
File /usr/lib/portage/pym/portage.py, line 3717, in spawnebuild
mysettings, debug=debug, logfile=logfile, **kwargs)
File /usr/lib/portage/pym/portage.py, line 2824, in spawn
set_term_size(rows, columns, slave_fd)
File /usr/lib/portage/pym/output.py, line 347, in set_term_size
spawn(cmd, env=os.environ, fd_pipes={0:fd})
File /usr/lib/portage/pym/portage_exec.py, line 179, in spawn
raise CommandNotFound(mycommand[0])
portage_exception.CommandNotFound: stty
[m3000][root][~]
==
--
Walter Dnes [EMAIL PROTECTED]
Stop the Squeegee Kids in Pinstripe Suits
Fight SAC's Canadian internet tax http://walterdnes.wordpress.com
--
gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Unmerged coreutils + mktemp; can't emerge anymore
what did you unmerge?
On Thu, Apr 17, 2008 at 9:48 PM, Walter Dnes [EMAIL PROTECTED] wrote:
I assume I'll have to download some gentoo system binaries. Can
someone point me to what I need?
Here's what happened. I did a regular emerge --sync and then tried
an update. There seemed to be a circular blockage involving both
coreutils and mktemp. As I've done in similar situations in the past, I
removed the blocking packages and re-tried emerge. Apparently, I
unmerged something vital. Emerge dies like so...
==
* checking ebuild checksums ;-) ...
* [ ok ] * checking auxfile checksums ;-) ...
* [ ok ] * checking miscfile checksums ;-) ...
* [ ok ] * checking alsa-driver-1.0.16.tar.bz2 ;-) ...
* [ ok ]Traceback (most recent call last):
File /usr/bin/emerge, line 6971, in ?
retval = emerge_main()
File /usr/bin/emerge, line 6965, in emerge_main
myopts, myaction, myfiles, spinner)
File /usr/bin/emerge, line 6339, in action_build
retval = mergetask.merge(
File /usr/bin/emerge, line 3981, in merge
return self._merge(mylist, favorites, mtimedb)
File /usr/bin/emerge, line 4259, in _merge
prev_mtimes=ldpath_mtimes)
File /usr/lib/portage/pym/portage.py, line 4806, in doebuild
alwaysdep=1, logfile=logfile)
File /usr/lib/portage/pym/portage.py, line 3705, in spawnebuild
retval=spawnebuild(actionmap[mydo][dep],actionmap,mysettings,debug,alwaysdep=alwaysdep,logfile=logfile)
File /usr/lib/portage/pym/portage.py, line 3705, in spawnebuild
retval=spawnebuild(actionmap[mydo][dep],actionmap,mysettings,debug,alwaysdep=alwaysdep,logfile=logfile)
File /usr/lib/portage/pym/portage.py, line 3705, in spawnebuild
retval=spawnebuild(actionmap[mydo][dep],actionmap,mysettings,debug,alwaysdep=alwaysdep,logfile=logfile)
File /usr/lib/portage/pym/portage.py, line 3705, in spawnebuild
retval=spawnebuild(actionmap[mydo][dep],actionmap,mysettings,debug,alwaysdep=alwaysdep,logfile=logfile)
File /usr/lib/portage/pym/portage.py, line 3717, in spawnebuild
mysettings, debug=debug, logfile=logfile, **kwargs)
File /usr/lib/portage/pym/portage.py, line 2824, in spawn
set_term_size(rows, columns, slave_fd)
File /usr/lib/portage/pym/output.py, line 347, in set_term_size
spawn(cmd, env=os.environ, fd_pipes={0:fd})
File /usr/lib/portage/pym/portage_exec.py, line 179, in spawn
raise CommandNotFound(mycommand[0])
portage_exception.CommandNotFound: stty
[m3000][root][~]
==
--
Walter Dnes [EMAIL PROTECTED]
Stop the Squeegee Kids in Pinstripe Suits
Fight SAC's Canadian internet tax http://walterdnes.wordpress.com
--
gentoo-user@lists.gentoo.org mailing list
--
gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Unmerged coreutils + mktemp; can't emerge anymore
On Thu, Apr 17, 2008 at 09:48:15PM -0400, Walter Dnes wrote about his incredible saga of thud and blunder. Sorry about the panic post. I got flustered and posted right away, when I should've checked for similar threads. Problem solved as per the suggestions in the other threads. Reminder to self... *NEVER*, *EVER* unmerge coreutils. -- Walter Dnes [EMAIL PROTECTED] Stop the Squeegee Kids in Pinstripe Suits Fight SAC's Canadian internet tax http://walterdnes.wordpress.com -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] OT Best font selection?
quoth the Gustavo Campos: That's not free, that's M$ stuff, but I'd suggest you to take a look, just take a look, at Segoe UI fonts. Well, it's included in portage, and I paid $0 for it so.. Besides, the OP mentioned no requirement that the font must be 'free'. I was simply stating what I use because I think it looks good. -d -- darren kirby :: Part of the problem since 1976 :: http://badcomputer.org ...the number of UNIX installations has grown to 10, with more expected... - Dennis Ritchie and Ken Thompson, June 1972 -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] OT Best font selection?
Well, it's included in portage, and I paid $0 for it so.. Is Segoe UI really in Portage? At the last time I emerged corefonts it wasn't present, so I had to find it on the web =) And by free, I meant the really free free, you know =) I was simply stating what I use because I think it looks good. Damn good IMHO! -- Gustavo Campos Ciência da Computação / Computer Science - UFMG -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] OT Best font selection?
quoth the Gustavo Campos: Well, it's included in portage, and I paid $0 for it so.. Is Segoe UI really in Portage? At the last time I emerged corefonts it wasn't present, so I had to find it on the web =) I dunno, I was talking about the Vera Sans. I was going to look for Segoe later. Thanks for the tip on terminus as well. I haver just tried it in my konsole and it looks great. And by free, I meant the really free free, you know =) Yeah, I know ;) I was simply stating what I use because I think it looks good. Damn good IMHO! -- Gustavo Campos Ciência da Computação / Computer Science - UFMG -d -- darren kirby :: Part of the problem since 1976 :: http://badcomputer.org ...the number of UNIX installations has grown to 10, with more expected... - Dennis Ritchie and Ken Thompson, June 1972 -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] udev and baselayout2
Daniel Pielmeier schrieb: Justin schrieb: to which udev version should be upgraded for the baselayout2? Openrc requires sys-fs/udev-118-r2. As far as i know udev-120 is going to be stabilized with openrc/baselayout-2 which I use too. Didn't have any problems so far! Regards, Daniel Thanks, that's what I wanted to know. Tried it yesterday in the IRC, but they only could quote what's beneath the ebuild. Thanks, justin signature.asc Description: OpenPGP digital signature
