[gentoo-user] Re: ebuild for gcc-independent llvm and clang for linux
Sorry for earlier mis-send. I send the article again. I'm going to build and install llvm and clang packages in my Linux PC as 1. Binaries of llvm and claag installed finally were compiled by clang. 2. The binaries of 1. depend on libc++.so instead of libstdc++.so. 3. libc++.so was installed by portage. 4. The binaries of llvm, clang, and libc++.so are not linked with libgcc. If linkage with libraries like libgcc is necessary, compiler_rt is linked. Checking the ebuilds of llvm, I found sys-libs/libcxx in DEPEND. But from the comment of revision, append libcxx in dependency is for freebsd. I want to ask I. Building packages described above can be created using ebuilds in main repository in linux? II. if I. is not possible, any ebuild of llvm and clang exists anywhere? If ebuilds that fill II. are not exist, I will to try create such ebuilds.
Re: [gentoo-user] kde 4.11.2, akonadi Kmail2 problems (retrieving folder contents please wait)
On 25/12/2013 16:19, Mick wrote: I really sympathise with you Alex because I have been through similar pains myself on one of my machines. That was enough of a lesson for me not to allow this piece of ... to mess up any other boxen. I'm still on kmail-1.13.7 and having thoughts of migrating to T'bird. +1 I ran into this too in the kde-4.4 era (when kmail2 was showing first signs of being releasable) and I honestly have not seen any signs since that the kmail devs have any clue at all. This mailing list has many stories of folks experiencing data loss when they just follow the instructions. Nowadays I use Tbird and all issues just go away. It's unbelievable the chaos kamil2 can inflict on a system, and the worst is that everything they do is a complete 100% already-solved system, there's nothing new in it - it does mail and contacts plus a few other bits! Classic case of 2nd major project syndrome (read mythical man Month if you don't get the reference) -- Alan McKinnon alan.mckin...@gmail.com
Re: [gentoo-user] kde 4.11.2, akonadi Kmail2 problems (retrieving folder contents please wait)
On Thursday 26 Dec 2013 12:02:13 Alan McKinnon wrote: On 25/12/2013 16:19, Mick wrote: I really sympathise with you Alex because I have been through similar pains myself on one of my machines. That was enough of a lesson for me not to allow this piece of ... to mess up any other boxen. I'm still on kmail-1.13.7 and having thoughts of migrating to T'bird. +1 I ran into this too in the kde-4.4 era (when kmail2 was showing first signs of being releasable) and I honestly have not seen any signs since that the kmail devs have any clue at all. This mailing list has many stories of folks experiencing data loss when they just follow the instructions. Nowadays I use Tbird and all issues just go away. It's unbelievable the chaos kamil2 can inflict on a system, and the worst is that everything they do is a complete 100% already-solved system, there's nothing new in it - it does mail and contacts plus a few other bits! Classic case of 2nd major project syndrome (read mythical man Month if you don't get the reference) I don't know to what extend the concept of 'Google for the desktop' at the hey-days of Web 2.0 made devs think that running a mysql database on a desktop machine to store meta-tags on everything a user possessed was a 'great idea!' Perhaps there are users who decide to click on the desktop to search for their files, emails, contacts and what not to justify taking the desktop development in this direction. None of the people I know do this, nor do I. Until Alzheimer's sets in I tend to use my brain to search and find things, where I have placed them contextually within my cognitive map. So far this works fine for me - well, most of the time. :p So clearly the bloatware direction taken by the KDE devs is not suitable for me and my immediate needs and that's one of the reasons I use Enlightenment. Irrespective of this, the functionality of semantic desktop search, when I tried it, drove me insane (e.g. it would launch Skype to dial the telephone number of on of my address book contacts I searched on, instead of creating a new mail message). Now, if I can only wean myself off kmail-1 before it is removed from portage ... -- Regards, Mick signature.asc Description: This is a digitally signed message part.
[gentoo-user] Re: how to create a multi-page PDF
Philip Webb purslow at ca.inter.net writes: I have a set of images of pages of a printed article, which I scanned ; there are jpg pdf versions . I want to concatenate them into 1 pdf . I used to use 'pdftk', but it required Java, which I don't want. I can import the jpg's into LO Impress create a slide-show pdf, but is there any simpler method ? I've run into similar problems. What I usually do is boot another distro (ubuntu, Fedora, RH, debian, arch, backtrack, Pentoo etc) and do the work on the files from a USB stick... I do something like this so often that I have an old dual core 64bit amd box, just to boot and test various distros and software offerings. hth, James
[gentoo-user] Fresco Logic FL1000G USB 3.0 Controller not working
Hi, I have an ASUS Rock 880 Motherboard with an FL1000G USB 3.0 controller. xhci_hcd is loaded but it does not work. When I try to connect a USB 3.0 device (I have a harddisk, and my display works as 3.0 hub) I get: hub 9-0:1.0: Could not disable port 1 after 2000 ms or similar for the harddisk. Googling I found for Ubuntu users, that adding pci=nomsi to the commandline should solve this however I am running in a Xen Dom0 that might have some influence? I still have no luck getting it to work. Anybody got a clue? Kernel is gentoo-sources-3.10.17 Konstantin -- Dipl-Inf. Konstantin Agouros aka Elwood Blues. Internet: elw...@agouros.de Altersheimerstr. 1, 81545 Muenchen, Germany. Tel +49 89 69370185 Captain, this ship will not survive the forming of the cosmos. B'Elana Torres
Re: [gentoo-user] Why are packages not merged binary
In 52b97530.8070...@gmail.com alan.mckin...@gmail.com (Alan McKinnon) writes: On 24/12/2013 12:59, Konstantinos Agouros wrote: Hi, I have several machines of the same architecture so I build using distcc and --buildpkg and then try to emerge -uk on the other boxes. However there are differences in useflags so I understand, that in some cases on the 2nd or 3rd box the package has to be rebuilt. What I still don't get is: How can I recognize _why_ a package is not merged from the binary. emerge -uDkvp --binpkg-respect-use y shows the use flags in colors but I don't know how to read this. If portage will use the binpkg, the line is printed in a pink/purple color. If it can't use the binpkg, it uses the normal colours (green here). I always get a report if USE differs, what is your setting of --binpkg-respect-use? The usual report looks like this: The setting is 'y'. If I read what is put there it would have been easier 'will silence this warning' no wonder I do not see anything... Thanks. Konstantin -- Dipl-Inf. Konstantin Agouros aka Elwood Blues. Internet: elw...@agouros.de Altersheimerstr. 1, 81545 Muenchen, Germany. Tel +49 89 69370185 Captain, this ship will not survive the forming of the cosmos. B'Elana Torres
Re: [gentoo-user] Chmod Failed
On Mittwoch, 25. Dezember 2013, 12:37:27 Silvio Siefke wrote: Hello, On Wed, 25 Dec 2013 11:49:53 +0400 the the.gu...@mail.ru wrote: ls -al would be helpful ks3374456 tmp # ls -la insgesamt 12 drwxrwxrwt 3 rootroot4096 25. Dez 05:49 . drwxr-xr-x 9 rootroot4096 10. Dez 07:47 .. -rw-r--r-- 1 rootroot 0 10. Dez 07:47 .keep drwsr-x--- 3 portage portage 4096 25. Dez 05:51 portage /mnt/gentoo/i686/var/tmp/portage/sys-apps/dbus-1.6.12/image ks3374456 image # ls -la insgesamt 20 drwxr-xr-x 5 rootroot4096 25. Dez 05:51 . drwxrwxr-x 8 portage portage 4096 25. Dez 05:51 .. drwxr-xr-x 5 rootroot4096 25. Dez 05:51 etc drwxr-xr-x 7 rootroot4096 25. Dez 05:51 usr drwxr-xr-x 4 rootroot4096 25. Dez 05:51 var ks3374456 dbus-1.6.12 # ls -la image/usr/libexec/ insgesamt 396 drwxr-xr-x 2 root root 4096 25. Dez 05:51 . drwxr-xr-x 7 root root 4096 25. Dez 05:51 .. -rwsr-x--- 1 root messagebus 396834 25. Dez 05:51 dbus-daemon-launch-helper ks3374456 dbus-1.6.12 # chmod 4750 image/usr/libexec/dbus-daemon-launch-helper chmod: Beim Setzen der Zugriffsrechte für „image/usr/libexec/dbus-daemon-launch-helper“: Keine Berechtigung Which users are involved? I assume you are emerging as root, and you have been doing you manual modification as root as well. Just a guess: as part of the emerge-command, chmod may be called as user 'portage', who does not have the right to change modifications of this file. Just another guess: have a look at your /etc/portage/make.conf, and check the FEATURES variable. If it contains 'userpriv', remove it and try again. Best regards Alex
[gentoo-user] KDE nepomuk memory usage
Hi there, How many memory is reasonable for virtuoso to use? I just had a view via htop, and I was surprised to see virtuoso-t processes occupying more than 1.5 GB (!), althoug there is a maximum of 128MB defined. Memory leak? Versions involved: dev-db/virtuoso-server-6.1.6 kde-base/kde-meta-4.10.5 Best regards Alex
Re: [gentoo-user] how to create a multi-page PDF
On Mittwoch, 25. Dezember 2013, 18:25:54 Philip Webb wrote: I have a set of images of pages of a printed article, which I scanned ; there are jpg pdf versions . I want to concatenate them into 1 pdf . I used to use 'pdftk', but it required Java, which I don't want. I can import the jpg's into LO Impress create a slide-show pdf, but is there any simpler method ? Do you have imagemagick installed? You may use convert to do so, e.g. convert page1.jpg page2.jpg ... output.pdf you may want to set the density (-density option) or the size of the final pages. See the man page for details. Best regards. Alex
[gentoo-user] akonadi, imap mail folders don't appear when created
Hi there, When I create a subfolder at top level of my imap account with kmail2, it does not appear in kmail. Versions involved: kde-base/kontact-4.10.5 kde-base/kmail-4.10.5 app-office/akonadi-server-1.9.2 kde-base/akonadiconsole-4.10.5 Strangly, I appears after a while on my second system (my laptop), but not on the desktop where I created it. Sometimes, also sub-folders are not shown properly when created. I tried reloading the imap data, stoppingstarting akonadi-servers, even re- login or reboot did not help. The only thing that really helped was removing the imap-agent from akonadi and re-installing it. It takes a long time until all akonadi/kmail/mysql/nepomuk/virtuoso-processes are finished with their job and you can do something useful with your computer again. Best regards Alex
[gentoo-user] Thunderbird folder structure on Imap servers inconsistent
Hi there, I'm trying out some mail clients with Imap support, and when using thunderbird (v24.2, latest version in stable gentoo tree) I encountered several problems regarding imap server consistency: Folders which I already deleted still appear (marked in itallic grey color in TB's folder list) Some folders appear multiple times (e.g. I have a folders like Mailinglists + Gentoo + users where all the mail from this forum goes to. This is consistent with the filesystem on my Imap server (dovecot). But, additionally, the 'Gentoo' subfolder appears in top level again (with all its other subfolders as well), and the 'users' folder appears again in top level a third time. Furthermore, when I select an unread mail in 'Mailinglists/Gentoo/users', the counter of unread mail decreases in the top level copy. Does anyone have similar experiences? Best regards, Alex
Re: [gentoo-user] kde 4.11.2, akonadi Kmail2 problems (retrieving folder contents please wait)
On Donnerstag, 26. Dezember 2013, 14:02:13 Alan McKinnon wrote: On 25/12/2013 16:19, Mick wrote: +1 I ran into this too in the kde-4.4 era (when kmail2 was showing first signs of being releasable) and I honestly have not seen any signs since that the kmail devs have any clue at all. This mailing list has many stories of folks experiencing data loss when they just follow the instructions. I know, and I think one of them was mine ... However, I always were able to fix it in away so I could live with it, but if a piece of software does not allow you to do what it is ment to do, it becomes a useless waste of bytes. So I had to restore from backup, which showed me two things: 1) My backup works (yeah !!) 2) I should have restored *all* user data as well, because: akonadi's mail filter agent stores in its config only a numerical id of a directory where to put the filtered mails to ('Move to folder') instead of its name. When recreating the database, it messed up these numbers, so the filters put the mail into the wrong folders. Hence, it *requires* that both the fiter- configfile *and* the database must be kept *syncronous*. Unless you have a database+filesystem which can handle modifications in one *single* transaction, this is IMHO a bad idea, and AFAIK no such combination exists so far. Nowadays I use Tbird and all issues just go away. I tried Tbird as well, but it has also serious problems keeping the folders synchronized. See my next mail I'm writing to this forum. It's unbelievable the chaos kamil2 can inflict on a system, and the worst is that everything they do is a complete 100% already-solved system, there's nothing new in it - it does mail and contacts plus a few other bits! Classic case of 2nd major project syndrome (read mythical man Month if you don't get the reference) Well, I think the idea behind akonadi is not that bad, but some times I have the impression that the implementation is either incomplete or buggy or highly inefficient.
Re: [gentoo-user] Chmod Failed
On Mittwoch, 25. Dezember 2013, 12:37:27 Silvio Siefke wrote: Hello, On Wed, 25 Dec 2013 11:49:53 +0400 the the.gu...@mail.ru wrote: ls -al would be helpful ks3374456 tmp # ls -la insgesamt 12 drwxrwxrwt 3 rootroot4096 25. Dez 05:49 . drwxr-xr-x 9 rootroot4096 10. Dez 07:47 .. -rw-r--r-- 1 rootroot 0 10. Dez 07:47 .keep drwsr-x--- 3 portage portage 4096 25. Dez 05:51 portage /mnt/gentoo/i686/var/tmp/portage/sys-apps/dbus-1.6.12/image ks3374456 image # ls -la insgesamt 20 drwxr-xr-x 5 rootroot4096 25. Dez 05:51 . drwxrwxr-x 8 portage portage 4096 25. Dez 05:51 .. drwxr-xr-x 5 rootroot4096 25. Dez 05:51 etc drwxr-xr-x 7 rootroot4096 25. Dez 05:51 usr drwxr-xr-x 4 rootroot4096 25. Dez 05:51 var ks3374456 dbus-1.6.12 # ls -la image/usr/libexec/ insgesamt 396 drwxr-xr-x 2 root root 4096 25. Dez 05:51 . drwxr-xr-x 7 root root 4096 25. Dez 05:51 .. -rwsr-x--- 1 root messagebus 396834 25. Dez 05:51 dbus-daemon-launch-helper ks3374456 dbus-1.6.12 # chmod 4750 image/usr/libexec/dbus-daemon-launch-helper chmod: Beim Setzen der Zugriffsrechte für „image/usr/libexec/dbus-daemon-launch-helper“: Keine Berechtigung Which users are involved? I assume you are emerging as root, and you have been doing you manual modification as root as well. Just a guess: as part of the emerge-command, chmod may be called as user 'portage', who does not have the right to change modifications of this file. Just another guess: have a look at your /etc/portage/make.conf, and check the FEATURES variable. If it contains 'userpriv', remove it and try again. Best regards Alex
[gentoo-user] KDE nepomuk memory usage
Hi there, How many memory is reasonable for virtuoso to use? I just had a view via htop, and I was surprised to see virtuoso-t processes occupying more than 1.5 GB (!), althoug there is a maximum of 128MB defined. Memory leak? Versions involved: dev-db/virtuoso-server-6.1.6 kde-base/kde-meta-4.10.5 Best regards Alex
Re: [gentoo-user] akonadi, imap mail folders don't appear when created
On Thursday 26 Dec 2013 19:14:40 Alexander Puchmayr wrote: Hi there, When I create a subfolder at top level of my imap account with kmail2, it does not appear in kmail. Versions involved: kde-base/kontact-4.10.5 kde-base/kmail-4.10.5 app-office/akonadi-server-1.9.2 kde-base/akonadiconsole-4.10.5 Strangly, I appears after a while on my second system (my laptop), but not on the desktop where I created it. Sometimes, also sub-folders are not shown properly when created. I tried reloading the imap data, stoppingstarting akonadi-servers, even re- login or reboot did not help. The only thing that really helped was removing the imap-agent from akonadi and re-installing it. It takes a long time until all akonadi/kmail/mysql/nepomuk/virtuoso-processes are finished with their job and you can do something useful with your computer again. Best regards Alex I understand that akonadi is asynchronous in building/sync'ing its tables, so you should wait until it finishes doing what it needs to do. Alternatively, use another application not related to KDEPIM which has proven to be a disaster for many (previous) KDE users. -- Regards, Mick signature.asc Description: This is a digitally signed message part.
Re: [gentoo-user] kde 4.11.2, akonadi Kmail2 problems (retrieving folder contents please wait)
On Donnerstag, 26. Dezember 2013, 14:02:13 Alan McKinnon wrote: On 25/12/2013 16:19, Mick wrote: +1 I ran into this too in the kde-4.4 era (when kmail2 was showing first signs of being releasable) and I honestly have not seen any signs since that the kmail devs have any clue at all. This mailing list has many stories of folks experiencing data loss when they just follow the instructions. I know, and I think one of them was mine ... However, I always were able to fix it in away so I could live with it, but if a piece of software does not allow you to do what it is ment to do, it becomes a useless waste of bytes. So I had to restore from backup, which showed me two things: 1) My backup works (yeah !!) 2) I should have restored *all* user data as well, because: akonadi's mail filter agent stores in its config only a numerical id of a directory where to put the filtered mails to ('Move to folder') instead of its name. When recreating the database, it messed up these numbers, so the filters put the mail into the wrong folders. Hence, it *requires* that both the fiter- configfile *and* the database must be kept *syncronous*. Unless you have a database+filesystem which can handle modifications in one *single* transaction, this is IMHO a bad idea, and AFAIK no such combination exists so far. Nowadays I use Tbird and all issues just go away. I tried Tbird as well, but it has also serious problems keeping the folders synchronized. See my next mail I'm writing to this forum. It's unbelievable the chaos kamil2 can inflict on a system, and the worst is that everything they do is a complete 100% already-solved system, there's nothing new in it - it does mail and contacts plus a few other bits! Classic case of 2nd major project syndrome (read mythical man Month if you don't get the reference) Well, I think the idea behind akonadi is not that bad, but some times I have the impression that the implementation is either incomplete or buggy or highly inefficient.
[gentoo-user] Thunderbird folder structure on Imap servers inconsistent
Hi there, I'm trying out some mail clients with Imap support, and when using thunderbird (v24.2, latest version in stable gentoo tree) I encountered several problems regarding imap server consistency: Folders which I already deleted still appear (marked in itallic grey color in TB's folder list) Some folders appear multiple times (e.g. I have a folders like Mailinglists + Gentoo + users where all the mail from this forum goes to. This is consistent with the filesystem on my Imap server (dovecot). But, additionally, the 'Gentoo' subfolder appears in top level again (with all its other subfolders as well), and the 'users' folder appears again in top level a third time. Furthermore, when I select an unread mail in 'Mailinglists/Gentoo/users', the counter of unread mail decreases in the top level copy. Does anyone have similar experiences? Best regards, Alex
Re: [gentoo-user] Chmod Failed
Hello, On Thu, 26 Dec 2013 18:31:45 +0100 Alexander Puchmayr alexander.puchm...@linznet.at wrote: Which users are involved? I assume you are emerging as root, and you have been doing you manual modification as root as well. Yes with root. But i understand this mistake never has. Thats why im woundering. Just a guess: as part of the emerge-command, chmod may be called as user 'portage', who does not have the right to change modifications of this file. But how can change? On all my PCs run gentoo but never come this error. On my Desktop siefke ~ $ cat /etc/group | grep portage portage:x:250:portage,siefke On the Chroot Build siefke ~ $ cat /mnt/gentoo/i686/etc/group | grep portage portage:x:250:portage Just another guess: have a look at your /etc/portage/make.conf, and check the FEATURES variable. If it contains 'userpriv', remove it and try again. siefke ~ $ cat /mnt/gentoo/i686/etc/portage/make.conf | grep FEATURES FEATURES=buildpkg sandbox collision-protect parallel-fetch -preserve-libs That i have read in a Tutorial for a Gentoo Build Server. I has think it was the mount from the /var/tmp/portage from the Hostsystem, but i has unmount, i delete the directory but it will not change. Thanks for help Nice Day Silvio -- Silvio Siefke siefke_lis...@web.de
Re: [gentoo-user] Thunderbird folder structure on Imap servers inconsistent
On 26/12/2013 21:14, Alexander Puchmayr wrote: Hi there, I'm trying out some mail clients with Imap support, and when using thunderbird (v24.2, latest version in stable gentoo tree) I encountered several problems regarding imap server consistency: Folders which I already deleted still appear (marked in itallic grey color in TB's folder list) Some folders appear multiple times (e.g. I have a folders like Mailinglists + Gentoo + users where all the mail from this forum goes to. This is consistent with the filesystem on my Imap server (dovecot). But, additionally, the 'Gentoo' subfolder appears in top level again (with all its other subfolders as well), and the 'users' folder appears again in top level a third time. Furthermore, when I select an unread mail in 'Mailinglists/Gentoo/users', the counter of unread mail decreases in the top level copy. Does anyone have similar experiences? I also run into those kinds of things with TBird; and there's no right-click option to resync things. However, it always comes right if I just leave it alone. So here's my theory: TBird is designed to operate async in the background. A amil server can pump mails into imap folders faster than any client can keep up, so I believe the TBird devs don't even try. Instead, the just let TBird get on with syncing one thing at a time until it's all done. And then the universe returns to normal :-) I can't explain what we see when TBird works, all I can tell you is that if I leave it alone, it always just works out fine (where leave it alone is on the order of about an hour or so for my gmail account that goes back 8 years, and that exchange-thingy the IT dept at work still believe has something to do with email...) -- Alan McKinnon alan.mckin...@gmail.com
Re: [gentoo-user] KDE nepomuk memory usage
On 26/12/2013 21:13, Alexander Puchmayr wrote: Hi there, How many memory is reasonable for virtuoso to use? I just had a view via htop, and I was surprised to see virtuoso-t processes occupying more than 1.5 GB (!), althoug there is a maximum of 128MB defined. Memory leak? Versions involved: dev-db/virtuoso-server-6.1.6 kde-base/kde-meta-4.10.5 What column in htop shows that number? top, htop, and all their friends do not display what most people assume they display. Modern OSes (for more than a decade now) manage memory in a way that makes it impossible to answer how much memory is this app using? If you are looking at the VIRT column, just ignore it, that column is practically useless for most rational viewings of {h,}top -- Alan McKinnon alan.mckin...@gmail.com
Re: [gentoo-user] how to create a multi-page PDF
131226 Alexander Puchmayr wrote: On Mittwoch, 25. Dezember 2013, 18:25:54 Philip Webb wrote: I have a set of images of pages of a printed article, which I scanned ; there are jpg pdf versions . I want to concatenate them into 1 pdf . Do you have imagemagick installed? You may use convert to do so, e.g. 'convert page1.jpg page2.jpg ... output.pdf' Thanks : that shortens the process a bit. Imagemagick + Poppler provide the tools to treat PDFs as if paper dox, ie unstaple, rotate, restaple etc. HTH others. -- ,, SUPPORT ___//___, Philip Webb ELECTRIC /] [] [] [] [] []| Cities Centre, University of Toronto TRANSIT`-O--O---' purslowatchassdotutorontodotca
[gentoo-user] kernel - locating option
I need to enable one option in the kernel-3.5.7-gentoo CONFIG_FHANDLE systemd need it. I know it is in General setup section. Looking location with / Symbol: FHANDLE [=n] Type : boolean Prompt: open by fhandle syscalls Defined at init/Kconfig:295 Location: - General setup Selects: EXPORTFS [=n] But I can not seem to location it, which option is it. I'm using make menuconfig Is there a better tool to configure/search for these options; this make menconfig is not user friendly. -- Joseph
Re: [gentoo-user] kernel - locating option
On Thursday 26 Dec 2013 23:52:17 Joseph wrote: I need to enable one option in the kernel-3.5.7-gentoo CONFIG_FHANDLE systemd need it. I know it is in General setup section. Looking location with / Symbol: FHANDLE [=n] Type : boolean Prompt: open by fhandle syscalls Defined at init/Kconfig:295 Location: - General setup Selects: EXPORTFS [=n] But I can not seem to location it, which option is it. I'm using make menuconfig Is there a better tool to configure/search for these options; this make menconfig is not user friendly. The current stable gentoo kernel is 3.10.17, so what is it that you are seeking with this old 3.5.7 version? Run emerge --sync to get the latest sources and then look under general to find it. It is under 'General setup' alright: General setup --- ... [*] System V IPC [*] POSIX Message Queues [*] open by fhandle syscalls --This one! HTH. -- Regards, Mick signature.asc Description: This is a digitally signed message part.
Re: [gentoo-user] kernel - locating option
On 12/27/13 00:17, Mick wrote: On Thursday 26 Dec 2013 23:52:17 Joseph wrote: I need to enable one option in the kernel-3.5.7-gentoo CONFIG_FHANDLE systemd need it. I know it is in General setup section. Looking location with / Symbol: FHANDLE [=n] Type : boolean Prompt: open by fhandle syscalls Defined at init/Kconfig:295 Location: - General setup Selects: EXPORTFS [=n] But I can not seem to location it, which option is it. I'm using make menuconfig Is there a better tool to configure/search for these options; this make menconfig is not user friendly. The current stable gentoo kernel is 3.10.17, so what is it that you are seeking with this old 3.5.7 version? Run emerge --sync to get the latest sources and then look under general to find it. It is under 'General setup' alright: General setup --- ... [*] System V IPC [*] POSIX Message Queues [*] open by fhandle syscalls --This one! HTH. -- Regards, Mick Thank you! Yes, I found it. Though, it would be nice if I look for an option to enable, from search menu / if it finds it I should be able to select it :-/ -- Joseph
Re: [gentoo-user] kernel - locating option
On Friday 27 Dec 2013 00:35:33 Joseph wrote: On 12/27/13 00:17, Mick wrote: On Thursday 26 Dec 2013 23:52:17 Joseph wrote: I need to enable one option in the kernel-3.5.7-gentoo CONFIG_FHANDLE systemd need it. I know it is in General setup section. Looking location with / Symbol: FHANDLE [=n] Type : boolean Prompt: open by fhandle syscalls Defined at init/Kconfig:295 Location: - General setup Selects: EXPORTFS [=n] But I can not seem to location it, which option is it. I'm using make menuconfig Is there a better tool to configure/search for these options; this make menconfig is not user friendly. The current stable gentoo kernel is 3.10.17, so what is it that you are seeking with this old 3.5.7 version? Run emerge --sync to get the latest sources and then look under general to find it. It is under 'General setup' alright: General setup --- ... [*] System V IPC [*] POSIX Message Queues [*] open by fhandle syscalls --This one! HTH. Thank you! Yes, I found it. Though, it would be nice if I look for an option to enable, from search menu / if it finds it I should be able to select it :-/ I think xconfig may be easier for this purpose? I'm not sure, but there are other ncurses, or GUI-fied kernel configuration applications. Try this to see if it serves your purpose when logged into an X session: make xconfig Use Ctrl+f to search for particular modules. Don't forget to save your changes before you build your new kernel! -- Regards, Mick signature.asc Description: This is a digitally signed message part.
Re: [gentoo-user] kernel - locating option
On 12/27/13 00:59, Mick wrote: Run emerge --sync to get the latest sources and then look under general to find it. It is under 'General setup' alright: General setup --- ... [*] System V IPC [*] POSIX Message Queues [*] open by fhandle syscalls --This one! HTH. Thank you! Yes, I found it. Though, it would be nice if I look for an option to enable, from search menu / if it finds it I should be able to select it :-/ I think xconfig may be easier for this purpose? I'm not sure, but there are other ncurses, or GUI-fied kernel configuration applications. Try this to see if it serves your purpose when logged into an X session: make xconfig Use Ctrl+f to search for particular modules. Don't forget to save your changes before you build your new kernel! -- Regards, Mick I tried to search for CONFIG_FHANDLE using xconfig and it can not even find it; so this application is useless :-/ -- Joseph