Re: New BDMSCAN version to look at your Broadcast Dataset
Eric Bielefeld wrote: We still have a couple hundred addresses defined on our new Shark as 3380's. I'm not sure exactly why, but they are there. I think we had some software that required 3380s at one time, but I don't think we have any now. I'm curious - what would be the benefit of getting off of the 3380s? I think that the larger track size might allow a little more data per track, but other than that, why would having 3380s be a problem? The benefits of getting off 3380s: - adressablility. Nowadays disk adresses occupy vast majority of addressing space. I know datacenters where mod-27 and even mod-54 was the only ay to address all the dasd box space. - consistency. Life is much easier when having only one geometry, isn't it? - convenience. AFAIK the largest 3380 model is approx 1GB. So, relatively average size datasets have to be multi-volume. - limits. Large datasets can reach 59-vol limit. Of course the above does not apply to datacenter with 6MIPS CPC, OS/390 2.6, 3480 drives for backup and 330GB of dasd. We call such datacenters as palliative: you can't cure them, but you can buoy them up. -- Radoslaw Skorupka Lodz, Poland -- BRE Bank SA ul. Senatorska 18 00-950 Warszawa www.brebank.pl Sąd Rejonowy dla m. st. Warszawy XII Wydział Gospodarczy Krajowego Rejestru Sądowego, nr rejestru przedsiębiorców KRS 025237 NIP: 526-021-50-88 Według stanu na dzień 01.01.2008 r. kapitał zakładowy BRE Banku SA wynosi 118.642.672 złote i został w całości wpłacony. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
SV: SDSF and REXX support
Here is a simple example (a test rexx I started with),
I think You can change the ? to desired actionchar,
(but do check the manual:
http://publibz.boulder.ibm.com/cgi-bin/bookmgr_OS390/BOOKS/ISF4CS80/12.5?DT=20080605143940
):
/* REXX */ Trace N
x = Isfcalls('ON')
isfprefix = 'S000TBE7'
isfcols = 'JNAME JOBID OWNERID JCLASS POS STATUS' ,
'SYSNAME WORKLOAD CPU TRANACT SRVCLS SRVCLASS ACTSYS' ,
'SYSAFF TOKEN PRTDEST'
Address SDSF 'ISFEXEC ST (ALTERNATE PREFIX SDSF_ST_)'
isfcols2 = ,
'DDNAME STEPN PROCS DSID OCLASS RECCNT BYTECNT DSNAME'
Do i = 1 To isfrows
Address SDSF ISFACT ST TOKEN('sdsf_ST_token.i') ,
'PARM(NP ?) (PREFIX SDSF_ST_Q_)'
Say rc
Say isfmsg
Do j = 1 To isfmsg2.0
Say isfmsg2.j
End
DO J = 1 TO SDSF_ST_Q_DDNAME.0
SAY SDSF_ST_Q_DDNAME.J
End
End
x = Isfcalls('OFF')
Exit 0
Regards,
Thomas Berg
__
Thomas Berg Specialist IT-U SWEDBANK
-Ursprungligt meddelande-
Från: IBM Mainframe Discussion List
[mailto:ibm-m...@bama.ua.edu] För Dr. Stephen Fedtke
Skickat: den 27 december 2008 12:12
Till: IBM-MAIN@bama.ua.edu
Ämne: SDSF and REXX support
hi,
does anybody know on how to change spool file attribute, such
as the msgclass, inside a SDSF REXX environment? I.e. on
how to change corresponding table columns, causing system
commands being issued by SDSF.
maybe, it is impossible.
best
stephen
---
Dr. Stephen Fedtke
Enterprise-IT-Security.com
Seestrasse 3a
CH-6300 Zug
Switzerland
Tel. ++41-(0)41-710-4005
www.enterprise-it-security.com
Meet your MAX Z Compliance Protector at Share, Austin,
March 1-6, 2009.
--
For IBM-MAIN subscribe / signoff / archive access
instructions, send email to lists...@bama.ua.edu with the
message: GET IBM-MAIN INFO Search the archives at
http://bama.ua.edu/archives/ibm-main.html
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: New BDMSCAN version to look at your Broadcast Dataset
AFAIK the largest 3380 model is approx 1GB. 3380-K: 1.89 GB - Too busy driving to stop for gas! -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
UNIX and System time in z/OS
running z/OS V1.9 with JAVA in Unix I would like to know if there is a way to establish the JAVA in UNIX to always get the system date and time. I would like to reduce the need to update the TZ parameter each time the time jumps. I do have an /etc/profile which is fairly basic. As shipped by IBM. However, after reading the configuration manual for UNIX and JAVA, I am lost in translation. Any help is appreciated. Lizette -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: UNIX and System time in z/OS
Lizette Koehler wrote: running z/OS V1.9 with JAVA in Unix I would like to know if there is a way to establish the JAVA in UNIX to always get the system date and time. I would like to reduce the need to update the TZ parameter each time the time jumps. I do have an /etc/profile which is fairly basic. As shipped by IBM. However, after reading the configuration manual for UNIX and JAVA, I am lost in translation. Any help is appreciated. Lizette Does the date command produce the current local time? -- Rich Smrcina VM Assist, Inc. Phone: 414-491-6001 Ans Service: 360-715-2467 http://www.linkedin.com/in/richsmrcina Catch the WAVV! http://www.wavv.org WAVV 2009 - Orlando, FL - May 15-19, 2009 -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: UNIX and System time in z/OS
No - it is getting GMT. We are EST. Lizette -Original Message- From: Rich Smrcina rsmrc...@wi.rr.com Sent: Dec 29, 2008 9:34 AM To: IBM-MAIN@bama.ua.edu Subject: Re: UNIX and System time in z/OS Lizette Koehler wrote: running z/OS V1.9 with JAVA in Unix I would like to know if there is a way to establish the JAVA in UNIX to always get the system date and time. I would like to reduce the need to update the TZ parameter each time the time jumps. I do have an /etc/profile which is fairly basic. As shipped by IBM. However, after reading the configuration manual for UNIX and JAVA, I am lost in translation. Any help is appreciated. Lizette Does the date command produce the current local time? -- Rich Smrcina VM Assist, Inc. Phone: 414-491-6001 Ans Service: 360-715-2467 http://www.linkedin.com/in/richsmrcina Catch the WAVV! http://www.wavv.org WAVV 2009 - Orlando, FL - May 15-19, 2009 -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Attachmate Extra! Toolbar editor - Usage assistance
Darn I say... that is the behavior I was experiencing. sigh. Thanks... I think. Bill -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu]on Behalf Of Pete Borton Sent: Sunday, December 28, 2008 8:52 AM To: IBM-MAIN@bama.ua.edu Subject: Re: Attachmate Extra! Toolbar editor - Usage assistance -Original Message- From: George.William [mailto:william.geo...@ftb.ca.gov] Sent: 26 December 2008 22:33 To: IBM-MAIN@bama.ua.edu Subject: Attachmate Extra! Toolbar editor - Usage assistance Is there someone familiar with the idiosyncrasies of the Attachmate Extra! toolbar editor. I am working with version 6.71. The editor does not seem to work as stated when I attempt to work with many of the toolbars I've tried to modify or create. Specifically, if I want to move a button around it simply does not move to where I move it too. Most of the time is jumps back to where it started or other times overlays another button. The HELP seems of no assistance as it simply says to move the buttons where you would like using the mouse and let it go where you like. Also... on changing the size of a button, HELP states to do this using the corner connectors and the mouse but this does nothing. I'm assuming the editor has some issues so I was hoping someone out there had some inside tricks or work arounds in working with this toolbar editor. FYI - I've scowered Attachmate's Support site but to no avail. Thanks --- Bill George __ Like a lot of Attachmate settings editors the Toolbar editor is a bit esoteric !! A.F.A.I.K. you cannot place a button past the last button on the right-hand side of the toolbar, you have to 'shuffle things about' to get a button to the far right. You cannot resize a button despite what the Help says, and you can only extend a toolbar to the right, not downwards. 'Large buttons' are 'display only'. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html __ CONFIDENTIALITY NOTICE: This email from the State of California is for the sole use of the intended recipient and may contain confidential and privileged information. Any unauthorized review or use, including disclosure or distribution, is prohibited. If you are not the intended recipient, please contact the sender and destroy all copies of this email. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: UNIX and System time in z/OS
I would like to know if there is a way to establish the JAVA in UNIX to
always get the system date and time. I would like to reduce the need to
update the TZ parameter each time the time jumps.
This may work:
SYS1.PARMLIB(CEEPRM00)
ENVAR('TZ=EST5EDT'), /* UNIX Time ZONE */
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
Antwort: UNIX and System time in z/OS
Hi Lizette, of course there is a kind of macro to obtain the time stamp with java. But I am not sure, if this is what you are looking for. Speaking about the TZ shell symbol, you do not need to update this parameter manually. For example Appendix I of z/OS V1R8.0 UNIX System Services Command Reference, Document Number SA22-7802-08 gives a good explanation on how to set up the symbol TZ correctly. Just allocate the application-specific .profile file (or your personal ~/.profile) and place your TZ definition into it. This would override /etc/profile. Well, the one manual intervention required is to decide in which time zone you would like to work. Then, you may choose between time zone according to the TZ symbol and CUT with the shell command /bin/date by (not) coding parameter -u. Cheers Michael Lizette Koehler stars...@mindspring.com Gesendet von: IBM Mainframe Discussion List IBM-MAIN@BAMA.UA.EDU 29.12.2008 15:29 Bitte antworten an IBM Mainframe Discussion List IBM-MAIN@BAMA.UA.EDU An IBM-MAIN@BAMA.UA.EDU Kopie Thema UNIX and System time in z/OS running z/OS V1.9 with JAVA in Unix I would like to know if there is a way to establish the JAVA in UNIX to always get the system date and time. I would like to reduce the need to update the TZ parameter each time the time jumps. I do have an /etc/profile which is fairly basic. As shipped by IBM. However, after reading the configuration manual for UNIX and JAVA, I am lost in translation. Any help is appreciated. Lizette -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: UNIX and System time in z/OS
Set TZ to EST5EDT. That should cause it to shift automatically. Larry Gray Large Systems Engineering Lowe's Companies 336-658-7944 -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of Lizette Koehler Sent: Monday, December 29, 2008 9:38 AM To: IBM-MAIN@bama.ua.edu Subject: Re: UNIX and System time in z/OS No - it is getting GMT. We are EST. Lizette NOTICE: All information in and attached to the e-mail(s) below may be proprietary, confidential, privileged and otherwise protected from improper or erroneous disclosure. If you are not the sender's intended recipient, you are not authorized to intercept, read, print, retain, copy, forward, or disseminate this message. If you have erroneously received this communication, please notify the sender immediately by phone (704-758-1000) or by e-mail and destroy all copies of this message (electronic, paper, or otherwise). Thank you. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: UNIX and System time in z/OS
On Mon, 29 Dec 2008 09:29:19 -0500, Lizette Koehler stars...@mindspring.com wrote: running z/OS V1.9 with JAVA in Unix I would like to know if there is a way to establish the JAVA in UNIX to always get the system date and time. I would like to reduce the need to update the TZ parameter each time the time jumps. I do have an /etc/profile which is fairly basic. As shipped by IBM. However, after reading the configuration manual for UNIX and JAVA, I am lost in translation. Any help is appreciated. Where are you setting / updating the TZ variable? If you use a format like TZ=CST6CDT (for central time) or TZ=EST5EDT (eastern time), that should take care of having to change it in the spring and fall. You should have this specified in your /etc/init.options and also in /etc/profile. Mark -- Mark Zelden Sr. Software and Systems Architect - z/OS Team Lead Zurich North America / Farmers Insurance Group - ZFUS G-ITO mailto:mark.zel...@zurichna.com z/OS Systems Programming expert at http://expertanswercenter.techtarget.com/ Mark's MVS Utilities: http://home.flash.net/~mzelden/mvsutil.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: UNIX and System time in z/OS
On Mon, 29 Dec 2008 09:37:53 -0500, Lizette Koehler wrote: No - it is getting GMT. We are EST. Simple an in adequate answer: Set TZ=EST5EDT (in several places.) Better answer that IBM doesn't support: There should be a single point of maintenance, either in PARMLIB or in STP that controls the final default TZ for both Classic and Unix environments. Best answer, alas NIH to IBM: Linkname: Sources for Time Zone and Daylight Saving Time Data URL: http://www.twinsun.com/tz/tz-link.htm -- gil -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: UNIX and System time in z/OS
Hi Lizette, You may want to code the following in your profile and never have to worry about time change -- unless of course, some smart (?) politician decides to push for another change to DST: TZ=EST5EDT export TZ=EST5EDT,M3.2.0,M11.1.0 Regards, Jasbir Chauhan -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of Lizette Koehler Sent: Monday, December 29, 2008 9:29 AM To: IBM-MAIN@bama.ua.edu Subject: UNIX and System time in z/OS running z/OS V1.9 with JAVA in Unix I would like to know if there is a way to establish the JAVA in UNIX to always get the system date and time. I would like to reduce the need to update the TZ parameter each time the time jumps. I do have an /etc/profile which is fairly basic. As shipped by IBM. However, after reading the configuration manual for UNIX and JAVA, I am lost in translation. Any help is appreciated. Lizette -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: UNIX and System time in z/OS
As always - more than one way to skin a cat. All excellent answers and now I must dig deeper and deeper into UNIX and the /etc folder. I knew about the /etc/profile. I did not know about the /etc/init.options. So many places so little time. And yes, it would be nice if IBM set it up with a single point of customization. I will work on all of these answers and see which one works for me. At this time, the /etc and UNIX in general has not been customized. So I am tackling this process one step at a time. Once I get the time sorted out, I think I can complete the customization without any issues. Lizette You may want to code the following in your profile and never have to worry about time change -- unless of course, some smart (?) politician decides to push for another change to DST: TZ=EST5EDT export TZ=EST5EDT,M3.2.0,M11.1.0 running z/OS V1.9 with JAVA in Unix I would like to know if there is a way to establish the JAVA in UNIX to always get the system date and time. I would like to reduce the need to update the TZ parameter each time the time jumps. I do have an /etc/profile which is fairly basic. As shipped by IBM. However, after reading the configuration manual for UNIX and JAVA, I am lost in translation. Any help is appreciated. Lizette -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Attachmate Extra! Toolbar editor - Usage assistance
One small trick is to put a 'separator' on the far right of the toolbar - you should then be able to move buttons to the far right and they will be inserted before the 'separator' - if you don't want the separator you can delete it when you've finished. Pete -Original Message- From: George.William [mailto:william.geo...@ftb.ca.gov] Sent: 29 December 2008 14:48 To: IBM-MAIN@bama.ua.edu Subject: Re: Attachmate Extra! Toolbar editor - Usage assistance Darn I say... that is the behavior I was experiencing. sigh. Thanks... I think. Bill -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu]on Behalf Of Pete Borton Sent: Sunday, December 28, 2008 8:52 AM To: IBM-MAIN@bama.ua.edu Subject: Re: Attachmate Extra! Toolbar editor - Usage assistance -Original Message- From: George.William [mailto:william.geo...@ftb.ca.gov] Sent: 26 December 2008 22:33 To: IBM-MAIN@bama.ua.edu Subject: Attachmate Extra! Toolbar editor - Usage assistance Is there someone familiar with the idiosyncrasies of the Attachmate Extra! toolbar editor. I am working with version 6.71. The editor does not seem to work as stated when I attempt to work with many of the toolbars I've tried to modify or create. Specifically, if I want to move a button around it simply does not move to where I move it too. Most of the time is jumps back to where it started or other times overlays another button. The HELP seems of no assistance as it simply says to move the buttons where you would like using the mouse and let it go where you like. Also... on changing the size of a button, HELP states to do this using the corner connectors and the mouse but this does nothing. I'm assuming the editor has some issues so I was hoping someone out there had some inside tricks or work arounds in working with this toolbar editor. FYI - I've scowered Attachmate's Support site but to no avail. Thanks --- Bill George __ Like a lot of Attachmate settings editors the Toolbar editor is a bit esoteric !! A.F.A.I.K. you cannot place a button past the last button on the right-hand side of the toolbar, you have to 'shuffle things about' to get a button to the far right. You cannot resize a button despite what the Help says, and you can only extend a toolbar to the right, not downwards. 'Large buttons' are 'display only'. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html __ CONFIDENTIALITY NOTICE: This email from the State of California is for the sole use of the intended recipient and may contain confidential and privileged information. Any unauthorized review or use, including disclosure or distribution, is prohibited. If you are not the intended recipient, please contact the sender and destroy all copies of this email. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Attachmate Extra! Toolbar editor - Usage assistance
Good tip. Thanks! There is one large customized toolbar (48 buttons) someone created long ago that this trick doesn't seem to work with. But a few others it does. -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu]on Behalf Of Pete Borton Sent: Monday, December 29, 2008 8:26 AM To: IBM-MAIN@bama.ua.edu Subject: Re: Attachmate Extra! Toolbar editor - Usage assistance One small trick is to put a 'separator' on the far right of the toolbar - you should then be able to move buttons to the far right and they will be inserted before the 'separator' - if you don't want the separator you can delete it when you've finished. Pete __ CONFIDENTIALITY NOTICE: This email from the State of California is for the sole use of the intended recipient and may contain confidential and privileged information. Any unauthorized review or use, including disclosure or distribution, is prohibited. If you are not the intended recipient, please contact the sender and destroy all copies of this email. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Attachmate Extra! Toolbar editor - Usage assistance
Looks like the number of buttons you can get on the toolbar is dependent on the Windows screen resolution you are using: 800x600 = 33 buttons 1024x768 = 42 buttons 1152x864 = 48 buttons 1280xnnn = 53 buttons Try going to 1280xnnn and see if you get that pesky 48 buttoner!! Pete -Original Message- From: George.William [mailto:william.geo...@ftb.ca.gov] Sent: 29 December 2008 16:30 To: IBM-MAIN@bama.ua.edu Subject: Re: Attachmate Extra! Toolbar editor - Usage assistance Good tip. Thanks! There is one large customized toolbar (48 buttons) someone created long ago that this trick doesn't seem to work with. But a few others it does. -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu]on Behalf Of Pete Borton Sent: Monday, December 29, 2008 8:26 AM To: IBM-MAIN@bama.ua.edu Subject: Re: Attachmate Extra! Toolbar editor - Usage assistance One small trick is to put a 'separator' on the far right of the toolbar - you should then be able to move buttons to the far right and they will be inserted before the 'separator' - if you don't want the separator you can delete it when you've finished. Pete __ CONFIDENTIALITY NOTICE: This email from the State of California is for the sole use of the intended recipient and may contain confidential and privileged information. Any unauthorized review or use, including disclosure or distribution, is prohibited. If you are not the intended recipient, please contact the sender and destroy all copies of this email. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Attachmate Extra! Toolbar editor - Usage assistance
already at 1280. where did you find this information by the way? -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu]on Behalf Of Pete Borton Sent: Monday, December 29, 2008 8:43 AM To: IBM-MAIN@bama.ua.edu Subject: Re: Attachmate Extra! Toolbar editor - Usage assistance Looks like the number of buttons you can get on the toolbar is dependent on the Windows screen resolution you are using: 800x600 = 33 buttons 1024x768 = 42 buttons 1152x864 = 48 buttons 1280xnnn = 53 buttons Try going to 1280xnnn and see if you get that pesky 48 buttoner!! Pete -Original Message- From: George.William [mailto:william.geo...@ftb.ca.gov] Sent: 29 December 2008 16:30 To: IBM-MAIN@bama.ua.edu Subject: Re: Attachmate Extra! Toolbar editor - Usage assistance Good tip. Thanks! There is one large customized toolbar (48 buttons) someone created long ago that this trick doesn't seem to work with. But a few others it does. -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu]on Behalf Of Pete Borton Sent: Monday, December 29, 2008 8:26 AM To: IBM-MAIN@bama.ua.edu Subject: Re: Attachmate Extra! Toolbar editor - Usage assistance One small trick is to put a 'separator' on the far right of the toolbar - you should then be able to move buttons to the far right and they will be inserted before the 'separator' - if you don't want the separator you can delete it when you've finished. Pete __ CONFIDENTIALITY NOTICE: This email from the State of California is for the sole use of the intended recipient and may contain confidential and privileged information. Any unauthorized review or use, including disclosure or distribution, is prohibited. If you are not the intended recipient, please contact the sender and destroy all copies of this email. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Attachmate Extra! Toolbar editor - Usage assistance
I didn't - just by playing around! It is Christmas after all!! -Original Message- From: George.William [mailto:william.geo...@ftb.ca.gov] Sent: 29 December 2008 17:00 To: IBM-MAIN@bama.ua.edu Subject: Re: Attachmate Extra! Toolbar editor - Usage assistance already at 1280. where did you find this information by the way? -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu]on Behalf Of Pete Borton Sent: Monday, December 29, 2008 8:43 AM To: IBM-MAIN@bama.ua.edu Subject: Re: Attachmate Extra! Toolbar editor - Usage assistance Looks like the number of buttons you can get on the toolbar is dependent on the Windows screen resolution you are using: 800x600 = 33 buttons 1024x768 = 42 buttons 1152x864 = 48 buttons 1280xnnn = 53 buttons Try going to 1280xnnn and see if you get that pesky 48 buttoner!! Pete -Original Message- From: George.William [mailto:william.geo...@ftb.ca.gov] Sent: 29 December 2008 16:30 To: IBM-MAIN@bama.ua.edu Subject: Re: Attachmate Extra! Toolbar editor - Usage assistance Good tip. Thanks! There is one large customized toolbar (48 buttons) someone created long ago that this trick doesn't seem to work with. But a few others it does. -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu]on Behalf Of Pete Borton Sent: Monday, December 29, 2008 8:26 AM To: IBM-MAIN@bama.ua.edu Subject: Re: Attachmate Extra! Toolbar editor - Usage assistance One small trick is to put a 'separator' on the far right of the toolbar - you should then be able to move buttons to the far right and they will be inserted before the 'separator' - if you don't want the separator you can delete it when you've finished. Pete __ CONFIDENTIALITY NOTICE: This email from the State of California is for the sole use of the intended recipient and may contain confidential and privileged information. Any unauthorized review or use, including disclosure or distribution, is prohibited. If you are not the intended recipient, please contact the sender and destroy all copies of this email. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Attachmate Extra! Toolbar editor - Usage assistance
hhh...ooh. Thanks -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu]on Behalf Of Pete Borton Sent: Monday, December 29, 2008 9:08 AM To: IBM-MAIN@bama.ua.edu Subject: Re: Attachmate Extra! Toolbar editor - Usage assistance I didn't - just by playing around! It is Christmas after all!! -Original Message- From: George.William [mailto:william.geo...@ftb.ca.gov] Sent: 29 December 2008 17:00 To: IBM-MAIN@bama.ua.edu Subject: Re: Attachmate Extra! Toolbar editor - Usage assistance already at 1280. where did you find this information by the way? -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu]on Behalf Of Pete Borton Sent: Monday, December 29, 2008 8:43 AM To: IBM-MAIN@bama.ua.edu Subject: Re: Attachmate Extra! Toolbar editor - Usage assistance Looks like the number of buttons you can get on the toolbar is dependent on the Windows screen resolution you are using: 800x600 = 33 buttons 1024x768 = 42 buttons 1152x864 = 48 buttons 1280xnnn = 53 buttons Try going to 1280xnnn and see if you get that pesky 48 buttoner!! Pete -Original Message- From: George.William [mailto:william.geo...@ftb.ca.gov] Sent: 29 December 2008 16:30 To: IBM-MAIN@bama.ua.edu Subject: Re: Attachmate Extra! Toolbar editor - Usage assistance Good tip. Thanks! There is one large customized toolbar (48 buttons) someone created long ago that this trick doesn't seem to work with. But a few others it does. -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu]on Behalf Of Pete Borton Sent: Monday, December 29, 2008 8:26 AM To: IBM-MAIN@bama.ua.edu Subject: Re: Attachmate Extra! Toolbar editor - Usage assistance One small trick is to put a 'separator' on the far right of the toolbar - you should then be able to move buttons to the far right and they will be inserted before the 'separator' - if you don't want the separator you can delete it when you've finished. Pete __ CONFIDENTIALITY NOTICE: This email from the State of California is for the sole use of the intended recipient and may contain confidential and privileged information. Any unauthorized review or use, including disclosure or distribution, is prohibited. If you are not the intended recipient, please contact the sender and destroy all copies of this email. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Attachmate Extra! Toolbar editor - Usage assistance
Was just wondering if Attachmate is dual screen sensitive ? i.e. will these numbers double if you've got two screens ? I've only got one though so that's where my playing ends ahhh -Original Message- From: George.William [mailto:william.geo...@ftb.ca.gov] Sent: 29 December 2008 17:15 To: IBM-MAIN@bama.ua.edu Subject: Re: Attachmate Extra! Toolbar editor - Usage assistance hhh...ooh. Thanks -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu]on Behalf Of Pete Borton Sent: Monday, December 29, 2008 9:08 AM To: IBM-MAIN@bama.ua.edu Subject: Re: Attachmate Extra! Toolbar editor - Usage assistance I didn't - just by playing around! It is Christmas after all!! -Original Message- From: George.William [mailto:william.geo...@ftb.ca.gov] Sent: 29 December 2008 17:00 To: IBM-MAIN@bama.ua.edu Subject: Re: Attachmate Extra! Toolbar editor - Usage assistance already at 1280. where did you find this information by the way? -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu]on Behalf Of Pete Borton Sent: Monday, December 29, 2008 8:43 AM To: IBM-MAIN@bama.ua.edu Subject: Re: Attachmate Extra! Toolbar editor - Usage assistance Looks like the number of buttons you can get on the toolbar is dependent on the Windows screen resolution you are using: 800x600 = 33 buttons 1024x768 = 42 buttons 1152x864 = 48 buttons 1280xnnn = 53 buttons Try going to 1280xnnn and see if you get that pesky 48 buttoner!! Pete -Original Message- From: George.William [mailto:william.geo...@ftb.ca.gov] Sent: 29 December 2008 16:30 To: IBM-MAIN@bama.ua.edu Subject: Re: Attachmate Extra! Toolbar editor - Usage assistance Good tip. Thanks! There is one large customized toolbar (48 buttons) someone created long ago that this trick doesn't seem to work with. But a few others it does. -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu]on Behalf Of Pete Borton Sent: Monday, December 29, 2008 8:26 AM To: IBM-MAIN@bama.ua.edu Subject: Re: Attachmate Extra! Toolbar editor - Usage assistance One small trick is to put a 'separator' on the far right of the toolbar - you should then be able to move buttons to the far right and they will be inserted before the 'separator' - if you don't want the separator you can delete it when you've finished. Pete __ CONFIDENTIALITY NOTICE: This email from the State of California is for the sole use of the intended recipient and may contain confidential and privileged information. Any unauthorized review or use, including disclosure or distribution, is prohibited. If you are not the intended recipient, please contact the sender and destroy all copies of this email. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: How to calculate size of a PS dataset
On Tue, 23 Dec 2008 03:07:44 -0600, Parin Gangar paringan...@gmail.com wrote: Hi, I need to calculate the size of a dataset in Megabytes / Gigabytes. I cannot download the file and check the same as I know the file size would be over 50 GB and I don't want to fill up my hard disk. The dataset has following details - Device type . . . . :,3390 Record format . . . :,FB Record length . . . :,1526 Block size . . . . :,7630 1st extent tracks . :,15000 Secondary tracks . :,1500 Current Allocation, ,Allocated tracks . :,297,141 ,Allocated extents . :,190 , , , , Current Utilization, ,Used tracks . . . . :,297,141 ,Used extents . . . :,190 I tried searching this on Google, but didn't get anything. I know that there is some formula for this. Any help will be much appreciated. Thanks, Parin IBM's Interactive Storage Management Facility (ISMF) option 1 will provide the allocated and used space of data sets in KB. If your storage admins don't have ISMF setup to be publically accessible, ask them to. The inquiry functions are useful. (And if you're brave enough, it can run large inquiries in batch (see NaviQuest).) If the data set is SMS compressed, a LISTCAT on the dataset will show it's compressed and uncompressed size in bytes in the COMP-USER-DATA-SIZE and USER-DATA-SIZE fields. Some third party products like FDR report and CA-DIsk can report on the dataset's size. Alan -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Kudos, IBMLink
This change is something which was discussed in a open forum with IBM at the San Diego SHARE in Aug. 2007. Sounds like they listened. ___ Jim Petersen MVS - Lead Systems Engineer Home Depot Technology Center 1300 Park Center Drive, Austin, TX 78753 www.homedepot.com email:jim_peter...@homedepot.com 512-977-2615 direct 210-977-2930 fax 210-859-9887 cell phone -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of Arthur Gutowski Sent: Tuesday, December 16, 2008 10:57 AM To: IBM-MAIN@bama.ua.edu Subject: Re: Kudos, IBMLink Here, here! Saves me the trouble of logging in if all that happened was someone opend the ETR... Regards, Art Gutowski Ford Motor Company -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html - The information contained in this e-mail and any attached documents may contain information that is confidential or otherwise protected from disclosure. If you are not the intended recipient of this message, or if this message has been sent to you in error, please immediately alert the sender by reply e-mail and then delete this message, including any attachments. Any dissemination, distribution or other use of the contents of this message by anyone other than the intended recipient is strictly prohibited. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
RO command query
hi all, Why the RO command does not work properly? is there any changed after upgrade to z/os 1.9. In our shop there are three members or LPARs connected to sysplex, when I issue the following command under the SDSF from LPAR1, nothing display from LPAR1 console. RO LPAR2, D A,L thanks and regards -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: RO command query
If you are getting an IEE311I message, you have a space between the comma and the command. On Mon, Dec 29, 2008 at 3:06 PM, Tommy Tsui tommyt...@gmail.com wrote: hi all, Why the RO command does not work properly? is there any changed after upgrade to z/os 1.9. In our shop there are three members or LPARs connected to sysplex, when I issue the following command under the SDSF from LPAR1, nothing display from LPAR1 console. RO LPAR2, D A,L thanks and regards -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: RO command query
It looks like there is a space between the comma and the D A,L. Have you tried it without the space? RO LPAR2,D A,L Lizette hi all, Why the RO command does not work properly? is there any changed after upgrade to z/os 1.9. In our shop there are three members or LPARs connected to sysplex, when I issue the following command under the SDSF from LPAR1, nothing display from LPAR1 console. RO LPAR2, D A,L -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: RO command query
acutally, I want to display all sysplex member tape information, but
it didn't work fine. After the command issued, nothing display and the
command time out finally.
CMDRESULT=AXRCMD('RO MOSYSD,D SMS,LIB(ALL),DETAIL','OUTPUTVAR.',100);
C=1
connectid= 'FIRSTLINE';
IF CMDRESULT =0 THEN
DO
MYRESULT=AXRMLWTO(OUTPUTVAR.1,'CONNECTID','C');
DO C = 2 TO OUTPUTVAR.0
LINE = 'SYSu '||left(outputvar.c,80)
MYRESULT=AXRMLWTO(line,'CONNECTID','D');
IF MyResult =0 THEN
EXIT 1;
END;
CALL AXRMLWTO , 'CONNECTID','E';
END ;
On Tue, Dec 30, 2008 at 7:31 AM, Lizette Koehler
stars...@mindspring.com wrote:
It looks like there is a space between the comma and the D A,L.
Have you tried it without the space? RO LPAR2,D A,L
Lizette
hi all,
Why the RO command does not work properly? is there any changed after
upgrade to z/os 1.9.
In our shop there are three members or LPARs connected to sysplex,
when I issue the following command under the SDSF from LPAR1, nothing
display from LPAR1 console.
RO LPAR2, D A,L
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
