TCPIP Gateway entry question
Hi list, we are having lots of trouble on defining a new type B IP address with subnetting under z/VM 4.4 Net Address: 172.24.131.160 Netmask: 255.255.255.224 = 27 mask bits Wildcard:0.0.0.31 Minimum IP address: 172.24.131.161 Maximum IP address: 172.24.131.190 Broadcast address: 172.24.131.191 Total IP number in network: 30 Our target machine is 172.124.131.188 But when applying Obeyfile We keep on constantly receiving error messages saying DTCPAR123I Line 104: Net address implies host routing, but HOST not specified That is, we must write the keyword HOST to avoid errors, but that's not what we want. Any help will be most welcome ! Thanks in advance, José Raúl Barón Dpto. Soporte e Implantación e-mail: jba...@calculo-sa.es P No imprima este e-mail si no es realmente necesario Do not print this e-mail unless really necessary.
Re: FTP of CMS file as attachment - PJBR
Hi Ed, No problem, we are in process of migrating z/VM 4.4 into z/VM 5.4 Thank you very much, BRGDS, José R. Barón Soporte e Implantación e-TICA y ARIES CALCULO S.A. Pza. de las Cortes, 2 28014 Madrid Tel. 91 330 86 44 / E-mail: jba...@calculo-sa.es P No imprima este e-mail si no es realmente necesario. Do not print this e-mail unless really necessary. -Mensaje original- De: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] En nombre de Edward M Martin Enviado el: miércoles, 17 de junio de 2009 17:25 Para: IBMVM@LISTSERV.UARK.EDU Asunto: Re: FTP of CMS file as attachment - PJBR Hello Jose, z/VM 4.3 did not support the attachment parameter. I am not sure when it was introduced. Ed Martin Aultman Health Foundation 330-363-5050 ext 35050 -Original Message- From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of jose raul baron Sent: Wednesday, June 17, 2009 9:59 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: FTP of CMS file as attachment - PJBR Tom, Bill, Marci, Mike, David, Jim, Ed, THANK YOU VERY MUCH FOR YOUR HELP. Now, to your questions: - Yes, I made a mistake, I meant e-mail but for some reason I wrote FTP instead. I'm Sorry for my lapsus. - PJBR means Produccion - Jose Baron Rodriguez. It's just an eyecatcher I tag my posts with so I can locate any reply I get more easily among hundreds of e-mails. Just a trick ;-) Now, this is what I have tested and my results with your great suggestions: - I have used PROFILE EXEC for a plain text file and a z/VM .PDF manual (no better item :-) for a binary file to play with. - First I tried..: sendfile ZVM43 PDF A to jbaron at calculo-sa.es (mime BINARY -- This works fine. - However I just couldn't get a satisfactory sendfile ascii-attachment solution for PROFILE EXEC. It sent me either the file as the e-mail text itself or as two .dat files a bit unconfortable to work with. I tried...: (1) sendfile profile exec a to jbaron at calculo-sa.es (SMTP autosubj uftsync and...: (2) sendfile profile exec a to jbaron at calculo-sa.es (MIME autosubj uftsync variations but since there is no remote UTF server it switches to SMTP, which makes (1) and (2) identical. - So I ended up installing MAILIT VMARC and it works fine with minimum variations: mailit to(jbaron at calculo-sa.es) subject(this is it) attach(profile exec) mailit to(jbaron at calculo-sa.es) subject(this is it) attach(zvm43 pdf) This solution has been the best one I've found to solve the two cases. Again, THANKS A LOT FOR YOUR HELP ! BRGDS, Jose Raul Baron Dpto. Sistemas CALCULO S.A. Pza. de las Cortes, 2 28014 Madrid Tel. 91 330 86 44 / E-mail: jba...@calculo-sa.es P No imprima este e-mail si no es realmente necesario. Do not print this e-mail unless really necessary.
Re: FTP of CMS file as attachment - PJBR
Tom, Bill, Marci, Mike, David, Jim, Ed, THANK YOU VERY MUCH FOR YOUR HELP. Now, to your questions: - Yes, I made a mistake, I meant e-mail but for some reason I wrote FTP instead. I'm Sorry for my lapsus. - PJBR means Produccion - Jose Baron Rodriguez. It's just an eyecatcher I tag my posts with so I can locate any reply I get more easily among hundreds of e-mails. Just a trick ;-) Now, this is what I have tested and my results with your great suggestions: - I have used PROFILE EXEC for a plain text file and a z/VM .PDF manual (no better item :-) for a binary file to play with. - First I tried..: sendfile ZVM43 PDF A to jbaron at calculo-sa.es (mime BINARY -- This works fine. - However I just couldn't get a satisfactory sendfile ascii-attachment solution for PROFILE EXEC. It sent me either the file as the e-mail text itself or as two .dat files a bit unconfortable to work with. I tried...: (1) sendfile profile exec a to jbaron at calculo-sa.es (SMTP autosubj uftsync and...: (2) sendfile profile exec a to jbaron at calculo-sa.es (MIME autosubj uftsync variations but since there is no remote UTF server it switches to SMTP, which makes (1) and (2) identical. - So I ended up installing MAILIT VMARC and it works fine with minimum variations: mailit to(jbaron at calculo-sa.es) subject(this is it) attach(profile exec) mailit to(jbaron at calculo-sa.es) subject(this is it) attach(zvm43 pdf) This solution has been the best one I've found to solve the two cases. Again, THANKS A LOT FOR YOUR HELP ! BRGDS, Jose Raul Baron Dpto. Sistemas CALCULO S.A. Pza. de las Cortes, 2 28014 Madrid Tel. 91 330 86 44 / E-mail: jba...@calculo-sa.es P No imprima este e-mail si no es realmente necesario. Do not print this e-mail unless really necessary.
FTP of CMS file as attachment - PJBR
Hi list, I would like to ask if there's a way to e-mail a CMS file as an attachment and not as the text itself. We have been trying to achieve this but haven't succeeded yet. All we get is the file as text, not as attachment. Any help will be very welcome. Thanks in advance, Raul Barón Dpto. Sistemas CALCULO S.A. E-mail: jba...@calculo-sa.es
z/VM 5.4 VSAM question - PJBR
Hi, list. We are currently considering to migrate from z/VM 4.4 to z/VM 5.4 but we have an issue: We still have critical applications that use VSE/VSAM 6.1 and the questions are: - Does VSAM still exist in z/VM 5.4 ? - Is it perhaps included in the z/VM 5.4 code (e.g. as TCPIP) ? - If not, is there any workaround way to keep on using our VSAM applications (e.g. installing the VSAM 6.1 tape we received with z/VM 4.4) ? Thanks in advance, Raul Barón Dpto. Sistemas CALCULO S.A.
Re: z/VM 5.4 VSAM question - PJBR
David and Kris, Thank you very much for your great help. I will consider every alternative you suggested. Once again, thank you very very much. BRGDS, Raul Barón Dpto. Sistemas CALCULO S.A.
TRACK / TRACKXA VMARC - PJBR
Hi list. Does anybody know wether or not is it any TRACK and/or TRACKXA VMARC version for VM 64 bit processors currently released ? Thanks in advance, José R. Barón Dpto. Sistemas CALCULO S.A.
Re: TRACK / TRACKXA VMARC - PJBR
Thank you very much, Dave And Thank you very much, Jim BRGDS, José R. Barón Dpto. Sistemas CALCULO S.A. -Mensaje original- De: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] En nombre de Dave Jones Enviado el: lunes, 18 de mayo de 2009 13:43 Para: IBMVM@LISTSERV.UARK.EDU Asunto: Re: TRACK / TRACKXA VMARC - PJBR Yes, thanks to the hard work of Jim Vincent, there is a 64 bit version of TRACK available here: http://vm.marist.edu/track/ It supports z/VM 5.4, running on 64 bit processors. Have a good one. jose raul baron wrote: Hi list. Does anybody know wether or not is it any TRACK and/or TRACKXA VMARC version for VM 64 bit processors currently released ? Thanks in advance, José R. Barón Dpto. Sistemas CALCULO S.A. -- Dave Jones V/Soft www.vsoft-software.com Houston, TX 281.578.7544
Re: Web Server in z/VM - PJBR
Richard, I took your advice and it worked perfectly. Your help has been gold-with-diamonds-stuck-on-it to me. Thank you very much for your help !! BRGDS, José R. Barón Dpto. Sistemas CALCULO S.A. Pza. de las Cortes, 2 28014 Madrid Tel. 91 330 86 44 / E-mail: jba...@calculo-sa.es P No imprima este e-mail si no es realmente necesario. Do not print this e-mail unless really necessary. -Mensaje original- De: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] En nombre de Schuh, Richard Enviado el: viernes, 24 de abril de 2009 19:05 Para: IBMVM@LISTSERV.UARK.EDU Asunto: Re: Web Server in z/VM - PJBR No problem. In PJBR2.CGI, it did exactly what you told it to do. When entry is from a Post, the primary input stream contains one entry for each field that was altered. The format is fieldname=text. I use a pipe like this to set the fieldname variables: 'callpipe (name RdIP end \)', '\ *.input:', '| locate w1', '| xlate', '| change ?=?/? 1', '| insert ?/? before', '| strip', '| varload' Your Parse Upper Var record statement is a nop. I presume your intent was to make the record upper case. If so, use the TRANSLATE function in REXX or the XLATE stage in a Pipe. I haven't the time to examine the main program this morning. Regards, Richard Schuh -Original Message- From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of jose raul baron Sent: Friday, April 24, 2009 12:01 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: Web Server in z/VM - PJBR Oh, Didn't know. Sorry. Here they are: == MAIN PROGRAM == fond='PowderBlue' -- Color definition rest='Navy' -- Color definition action='http://IPaddr/htbin/pjbr2-- this intends to be a call to pjbr2.cgi 'OUTPUT' html Address COMMAND 'GLOBALV SELECT HTTPD GET VRM' 'OUTPUT' ]CMS HTTPD vrm CPQ CGI /* eliminate piggy-backed CP command trojans */ 'ADDPIPE *.INPUT: | SPLIT AT' '001500'x '| *.INPUT:' If rc ¬= 0 Then Exit rc 'PEEKTO RECORD' If rc ¬= 0 Then record = Parse Upper Var record arg1 arg2 arg3 arg4 arg5 Address COMMAND 'GLOBALV SELECT HTTPD GET VRM' 'OUTPUT' HEAD 'OUTPUT' TITLEForm filling example/TITLE 'OUTPUT' /HEAD 'OUTPUT' BODY bgcolor=fond text=navy link=navy alink=navy , || vlink=navy 'OUTPUT' A HREF='/htbin/imagemap;/imglib/img.map' 'OUTPUT' IMG SRC='http://IPaddr/trex.gif' ISMAP/A 'OUTPUT' H1Form Filling example/H1 'OUTPUT' form method=get action=action' 'OUTPUT' Complete this form please. 'OUTPUT' p 'OUTPUT' Nombre: INPUT TYPE='text' NAME='name' SIZE=45 MAXLENGTH=50 'OUTPUT' VALUE='Write your name here' 'OUTPUT' p 'OUTPUT' Address: TEXTAREA NAME='address' COLS=40 ROWS=3 'OUTPUT' Write your address here 'OUTPUT' /TEXTAREA 'OUTPUT' p 'OUTPUT' Account: INPUT TYPE='text' NAME='acctID' SIZE=30 'OUTPUT' p 'OUTPUT' Password: INPUT TYPE='password' NAME='password' SIZE=10 'OUTPUT' p 'OUTPUT' Which application do you use? 'OUTPUT' p 'OUTPUT' INPUT TYPE='checkbox' NAME='apps' VALUE='Gopher' Gopher 'OUTPUT' INPUT TYPE='checkbox' NAME='apps' VALUE='Newsreader' News 'OUTPUT' INPUT TYPE='checkbox' NAME='apps' VALUE='Webexplorer' Webex 'OUTPUT' INPUT TYPE='checkbox' NAME='apps' VALUE='Archie' Archie 'OUTPUT' INPUT TYPE='checkbox' NAME='apps' VALUE='FTP' FTP 'OUTPUT' INPUT TYPE='checkbox' NAME='apps' VALUE='Telnet' Telnet 'OUTPUT' p 'OUTPUT' How would you rate your satisfaction? 'OUTPUT' p 'OUTPUT' INPUT TYPE='radio' NAME='rating' VALUE='1' Very satisfied 'OUTPUT' INPUT TYPE='radio' NAME='rating' VALUE='2' Satisfied 'OUTPUT' INPUT TYPE='radio' NAME='rating' VALUE='3' Neutral 'OUTPUT' INPUT TYPE='radio' NAME='rating' VALUE='4' Unsatisfied 'OUTPUT' INPUT TYPE='radio' NAME='rating' VALUE='5' Very unsatisfied 'OUTPUT' p 'OUTPUT' reset fields: 'OUTPUT' INPUT TYPE='reset' 'OUTPUT' Press to send your answers: 'OUTPUT' INPUT TYPE='submit' VALUE='SEND' 'OUTPUT' /FORM 'OUTPUT' /BODY 'OUTPUT' /HTML Exit PJBR2.CGI 'OUTPUT' html Address COMMAND 'GLOBALV SELECT HTTPD GET VRM' 'OUTPUT' ]CMS HTTPD vrm CPQ CGI /* eliminate piggy-backed CP command trojans */ 'ADDPIPE *.INPUT: | SPLIT AT' '001500'x '| *.INPUT:' If rc ¬= 0 Then Exit rc 'PEEKTO RECORD' If rc ¬= 0 Then record = Parse Upper Var record Address COMMAND 'GLOBALV SELECT HTTPD GET VRM' 'OUTPUT' HEADTITLEEsto es lo que he recibido/TITLE/HEAD 'OUTPUT' BODY 'OUTPUT' record -- It simply writes: name=Write your name here 'OUTPUT' /BODY 'OUTPUT' /HTML Exit BRGDS, José R. Barón Dpto. Sistemas CALCULO S.A. Pza. de las Cortes, 2 28014 Madrid Tel. 91 330 86 44 / E-mail: jba...@calculo-sa.es P
Re: Web Server in z/VM - PJBR
Oh, Didn't know. Sorry. Here they are: == MAIN PROGRAM == fond='PowderBlue' -- Color definition rest='Navy' -- Color definition action='http://IPaddr/htbin/pjbr2-- this intends to be a call to pjbr2.cgi 'OUTPUT' html Address COMMAND 'GLOBALV SELECT HTTPD GET VRM' 'OUTPUT' ]CMS HTTPD vrm CPQ CGI /* eliminate piggy-backed CP command trojans */ 'ADDPIPE *.INPUT: | SPLIT AT' '001500'x '| *.INPUT:' If rc ¬= 0 Then Exit rc 'PEEKTO RECORD' If rc ¬= 0 Then record = Parse Upper Var record arg1 arg2 arg3 arg4 arg5 Address COMMAND 'GLOBALV SELECT HTTPD GET VRM' 'OUTPUT' HEAD 'OUTPUT' TITLEForm filling example/TITLE 'OUTPUT' /HEAD 'OUTPUT' BODY bgcolor=fond text=navy link=navy alink=navy , || vlink=navy 'OUTPUT' A HREF='/htbin/imagemap;/imglib/img.map' 'OUTPUT' IMG SRC='http://IPaddr/trex.gif' ISMAP/A 'OUTPUT' H1Form Filling example/H1 'OUTPUT' form method=get action=action' 'OUTPUT' Complete this form please. 'OUTPUT' p 'OUTPUT' Nombre: INPUT TYPE='text' NAME='name' SIZE=45 MAXLENGTH=50 'OUTPUT' VALUE='Write your name here' 'OUTPUT' p 'OUTPUT' Address: TEXTAREA NAME='address' COLS=40 ROWS=3 'OUTPUT' Write your address here 'OUTPUT' /TEXTAREA 'OUTPUT' p 'OUTPUT' Account: INPUT TYPE='text' NAME='acctID' SIZE=30 'OUTPUT' p 'OUTPUT' Password: INPUT TYPE='password' NAME='password' SIZE=10 'OUTPUT' p 'OUTPUT' Which application do you use? 'OUTPUT' p 'OUTPUT' INPUT TYPE='checkbox' NAME='apps' VALUE='Gopher' Gopher 'OUTPUT' INPUT TYPE='checkbox' NAME='apps' VALUE='Newsreader' News 'OUTPUT' INPUT TYPE='checkbox' NAME='apps' VALUE='Webexplorer' Webex 'OUTPUT' INPUT TYPE='checkbox' NAME='apps' VALUE='Archie' Archie 'OUTPUT' INPUT TYPE='checkbox' NAME='apps' VALUE='FTP' FTP 'OUTPUT' INPUT TYPE='checkbox' NAME='apps' VALUE='Telnet' Telnet 'OUTPUT' p 'OUTPUT' How would you rate your satisfaction? 'OUTPUT' p 'OUTPUT' INPUT TYPE='radio' NAME='rating' VALUE='1' Very satisfied 'OUTPUT' INPUT TYPE='radio' NAME='rating' VALUE='2' Satisfied 'OUTPUT' INPUT TYPE='radio' NAME='rating' VALUE='3' Neutral 'OUTPUT' INPUT TYPE='radio' NAME='rating' VALUE='4' Unsatisfied 'OUTPUT' INPUT TYPE='radio' NAME='rating' VALUE='5' Very unsatisfied 'OUTPUT' p 'OUTPUT' reset fields: 'OUTPUT' INPUT TYPE='reset' 'OUTPUT' Press to send your answers: 'OUTPUT' INPUT TYPE='submit' VALUE='SEND' 'OUTPUT' /FORM 'OUTPUT' /BODY 'OUTPUT' /HTML Exit PJBR2.CGI 'OUTPUT' html Address COMMAND 'GLOBALV SELECT HTTPD GET VRM' 'OUTPUT' ]CMS HTTPD vrm CPQ CGI /* eliminate piggy-backed CP command trojans */ 'ADDPIPE *.INPUT: | SPLIT AT' '001500'x '| *.INPUT:' If rc ¬= 0 Then Exit rc 'PEEKTO RECORD' If rc ¬= 0 Then record = Parse Upper Var record Address COMMAND 'GLOBALV SELECT HTTPD GET VRM' 'OUTPUT' HEADTITLEEsto es lo que he recibido/TITLE/HEAD 'OUTPUT' BODY 'OUTPUT' record -- It simply writes: name=Write your name here 'OUTPUT' /BODY 'OUTPUT' /HTML Exit BRGDS, José R. Barón Dpto. Sistemas CALCULO S.A. Pza. de las Cortes, 2 28014 Madrid Tel. 91 330 86 44 / E-mail: jba...@calculo-sa.es P No imprima este e-mail si no es realmente necesario. Do not print this e-mail unless really necessary. -Mensaje original- De: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] En nombre de Schuh, Richard Enviado el: jueves, 23 de abril de 2009 19:25 Para: IBMVM@LISTSERV.UARK.EDU Asunto: Re: Web Server in z/VM - PJBR Your attachments do not survive when you send to the list. You will have to copy them into the note for us to be able to see them. Regards, Richard Schuh -Original Message- From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of jose raul baron Sent: Thursday, April 23, 2009 10:12 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Web Server in z/VM - PJBR Hi list, I have a webshare web server running on z/VM 4.4 and I have a web page hosted on user httpd1 which creates a form. If I POST send my form with mailto, it e-mails the form fields (all the filled ones) like this: name=Write+your+name+hereaddress=Write+your+address+here%0D%0 AacctID=pass word= But if I POST execute another CGI script supposedly to process the filled form data, this is what I get in my destination CGI program: name=Write your name here Any ideas ? (I'm enclosing the code of both CGIs in case that anyone wants to see). Thanks in advance, José R. Barón Dpto. Sistemas CALCULO S.A. =
Web Server in z/VM - PJBR
Hi list, I have a webshare web server running on z/VM 4.4 and I have a web page hosted on user httpd1 which creates a form. If I POST send my form with mailto, it e-mails the form fields (all the filled ones) like this: name=Write+your+name+hereaddress=Write+your+address+here%0D%0AacctID=pass word= But if I POST execute another CGI script supposedly to process the filled form data, this is what I get in my destination CGI program: name=Write your name here Any ideas ? (I'm enclosing the code of both CGIs in case that anyone wants to see). Thanks in advance, José R. Barón Dpto. Sistemas CALCULO S.A.
z/VM 5.4 Installation from DVD Failure - PJBR
Hi all, We are currently installing a second-level z/VM via DVD installation and we are getting this error when issuing the command: pipe ftpget -h ipaddr -u user -p password -d ftpdir -v BEF -DVDEOF -f CKD222* | unpack | eckdrest CKD222* DMSRXS1408W File TCPIP DATA * not found ECKDREST: WARNING: 75 TRACKS WERE RESTORED AND 75 ADDITIONAL TRACKS WERE CLEARED ECKDREST: WROTE 150 TRACKS ON , RC=1 Ready(1); Has anyone an idea of what the problem could be ? We haven't been able to locate the error and find a solution. Thanks in advance, José R. Barón Dpto. Sistemas CALCULO S.A. Pza. de las Cortes, 2 28014 Madrid Tel. 91 330 86 44 / E-mail: mailto:jba...@calculo-sa.es jba...@calculo-sa.es P No imprima este e-mail si no es realmente necesario. Do not print this e-mail unless really necessary.
Re: z/VM 5.4 Installation from DVD Failure - PJBR
Rob, just a quick note. The size for minidisk must be EXACTLY of 5 cyl. Not less AND NOT MORE :-) if more than 5 cyl. are defined you get RC=1. This goes too with the other disks that must be EXACTLY of: - Minidisk 22CC: 5 cyl. - Minidisk 2CF1: 120 cyl. BRGDS and thank you again for your help. José R. Barón Dpto. Sistemas CALCULO S.A. Pza. de las Cortes, 2 28014 Madrid Tel. 91 330 86 44 / E-mail: jba...@calculo-sa.es P No imprima este e-mail si no es realmente necesario. Do not print this e-mail unless really necessary. -Mensaje original- De: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] En nombre de Rob van der Heij Enviado el: martes, 17 de marzo de 2009 11:57 Para: IBMVM@LISTSERV.UARK.EDU Asunto: Re: z/VM 5.4 Installation from DVD Failure - PJBR On Tue, Mar 17, 2009 at 11:41 AM, jose raul baron jba...@calculo-sa.es wrote: Hi all, We are currently installing a second-level z/VM via DVD installation and we are getting this error when issuing the command: pipe ftpget -h ipaddr -u user -p password -d ftpdir -v BEF -DVDEOF -f CKD222* | unpack | eckdrest CKD222* DMSRXS1408W File TCPIP DATA * not found ECKDREST: WARNING: 75 TRACKS WERE RESTORED AND 75 ADDITIONAL TRACKS WERE CLEARED ECKDREST: WROTE 150 TRACKS ON , RC=1 Ready(1); Are you sure the disk is R/W and that it is the right size? I tried to do it from the quick ref guide and found that it was missing some of the steps that you need (and are only in the real book). IIRC this looks like the original disk was 5 cyl and yours is 10, and that the RC=1 is an indication that it went fine.. Access the mini disk and see what's there and whether it looks reliable. If it was initially empty and now has a lot of files, then you're probably good to go. Rob
Re: z/VM 5.4 Installation from DVD Failure - PJBR
Hi Rob. Yes, I have looked into my disk and it varied from being empty to be filled with lots of files (67 files to be more accurate). I suppose this is no big problem, but just wanted to make sure. (The old costume to look for RC=0's). I will take your advise and go on. Thanks for your help once again. BRGDS, José R. Barón Dpto. Sistemas CALCULO S.A. -Mensaje original- De: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] En nombre de Rob van der Heij Enviado el: martes, 17 de marzo de 2009 11:57 Para: IBMVM@LISTSERV.UARK.EDU Asunto: Re: z/VM 5.4 Installation from DVD Failure - PJBR On Tue, Mar 17, 2009 at 11:41 AM, jose raul baron jba...@calculo-sa.es wrote: Hi all, We are currently installing a second-level z/VM via DVD installation and we are getting this error when issuing the command: pipe ftpget -h ipaddr -u user -p password -d ftpdir -v BEF -DVDEOF -f CKD222* | unpack | eckdrest CKD222* DMSRXS1408W File TCPIP DATA * not found ECKDREST: WARNING: 75 TRACKS WERE RESTORED AND 75 ADDITIONAL TRACKS WERE CLEARED ECKDREST: WROTE 150 TRACKS ON , RC=1 Ready(1); Are you sure the disk is R/W and that it is the right size? I tried to do it from the quick ref guide and found that it was missing some of the steps that you need (and are only in the real book). IIRC this looks like the original disk was 5 cyl and yours is 10, and that the RC=1 is an indication that it went fine.. Access the mini disk and see what's there and whether it looks reliable. If it was initially empty and now has a lot of files, then you're probably good to go. Rob
Re: z/VM 5.2 Absurd System shutdown - PJBR
OK, I will CPFMTXA 0-END (entire volume) but ALLOC only as PAGE 1-3338, thus avoiding the risk. Saludos, José R. Barón Dpto. Sistemas CALCULO S. A. Tel. 91 330 86 44 e-mail: [EMAIL PROTECTED] P No imprima este e-mail si no es realmente necesario -Mensaje original- De: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] En nombre de Alan Altmark Enviado el: martes, 08 de enero de 2008 19:02 Para: IBMVM@LISTSERV.UARK.EDU Asunto: Re: z/VM 5.2 Absurd System shutdown - PJBR On Tuesday, 01/08/2008 at 11:54 EST, David Boyes [EMAIL PROTECTED] wrote: The cyl 0 vs 1 discussion is just a safety measure; CP is usually smart enough not to shoot itself in the head by paging onto the volume label allocation bitmap that tells it where it paged stuff...8-) The paging subsystem will page to cyl 0, but it knows to avoid the label and tracks that have other CP administrative data on them. In the interest of avoiding problems, however, don't ALLOCATE cyl 0 as anything other than PERM. It's just not worth the risk. Cylinder zero is PERM and belongs to CP. I tell you three times. Alan Altmark z/VM Development IBM Endicott
Re: z/VM 5.2 Absurd System shutdown - PJBR
Yes, that's a good question I have been wondering too. I will add a new page device but this time starting from cyl. 1 I will let you know the result of this. Thank you very much Saludos, José R. Barón Dpto. Sistemas CALCULO S. A. Tel. 91 330 86 44 e-mail: [EMAIL PROTECTED] P No imprima este e-mail si no es realmente necesario -Mensaje original- De: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] En nombre de Fritz, Wilhelm Enviado el: viernes, 04 de enero de 2008 14:09 Para: IBMVM@LISTSERV.UARK.EDU Asunto: AW: z/VM 5.2 Absurd System shutdown - PJBR Why does your paging device start on cyl 0?!?: -- PAGE AREAS == EXTENT EXTENT TOTAL PAGES HIGH% VOLID RDEV STARTEND PAGES IN USE PAGE USED -- -- -- -- -- -- 520PAG 033F 1 3338 600840 30602 31676 5% 520PG1 02D5 0 3338 601020 11660 11835 1% -- Shouldn't it start on Cyl 1, like 520PAG? Regards, Willy Fritz -Ursprüngliche Nachricht- Von: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] Auftrag von Jose Raul Baron Gesendet: Freitag, 4. Januar 2008 13:27 An: IBMVM@LISTSERV.UARK.EDU Betreff: z/VM 5.2 Absurd System shutdown - PJBR Hi, list. We are experiencing some problems with unpredictable and so far inevitable system shutdowns for aparently unknown reasons. - We are running 4 SLES9 Linux images under z/VM 5.2 - If we keep only 3 images, this problem doesn't seem to appear. It has happened only with 4 images running at once. - OPERATOR 191 console registers suddenly (but it can be like this for HOURS) the following message: xx:yy:zz HCPPAW415E Six continuous paging errors have occurred on DASD 02D5 volume 520PG1. (this message appears some 25-30 times per second) - Disk 2D5 has been hardware-checked successfully, so it has no hardware errors. - Latest RSU has been applied by IBM-advise. This is our level: q cplevel z/VM Version 5 Release 2.0, service level 0702 (64-bit) Generated at 12/21/07 19:33:42 MAI IPL at 01/04/08 11:46:43 MAI Ready; q cmslevel CMS Level 22, Service Level 702 Ready; - These were some system indicators at the time of the latest shutdown: PROCESSOR = AVGPROC-009% 01 MDC READS-00/SEC WRITES-00/SEC HIT RATIO-000% PAGING-2/SEC STEAL-000% Q0-1(0) DORMANT-00018 Q1-0(0) E1-0(0) Q2-0(0) EXPAN-001 E2-0(0) Q3-4(0) EXPAN-001 E3-0(0) PROC -009% LIMITED-0 PAGE AREAS == EXTENT EXTENT TOTAL PAGES HIGH% VOLID RDEV STARTEND PAGES IN USE PAGE USED -- -- -- -- -- -- 520PAG 033F 1 3338 600840 30602 31676 5% 520PG1 02D5 0 3338 601020 11660 11835 1% -- -- SUMMARY1174K 42262 3% USABLE 1174K 42262 3% SPOOL AREA == EXTENT EXTENT TOTAL PAGES HIGH% VOLID RDEV STARTEND PAGES IN USE PAGE USED -- -- -- -- -- -- 520SPL 0315 1 3338 600840 118407 160305 19% -- -- SUMMARY 600840 118407 19% USABLE600840 118407 19% * * * End of File * * * - So it shows neither PAGE nor SPOOL bottleneck. CPU values are also acceptably low. - We have 8 GB total RAM in this LPAR. - Our Linux RAM definitions are: USER LINUX1 LINUX1 3G3G BG USER LINUX2 LINUX2 2560M 2560M BG USER LINUX3 LINUX3
Re: z/VM 5.2 Absurd System shutdown - PJBR
I will make sure to format the entire disk before any further action prior to add it as a page area. Saludos, José R. Barón Dpto. Sistemas CALCULO S. A. Tel. 91 330 86 44 e-mail: [EMAIL PROTECTED] P No imprima este e-mail si no es realmente necesario -Mensaje original- De: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] En nombre de Fritz, Wilhelm Enviado el: viernes, 04 de enero de 2008 14:29 Para: IBMVM@LISTSERV.UARK.EDU Asunto: AW: z/VM 5.2 Absurd System shutdown - PJBR Thanks for the clarification, Rob. I didn't know that. Willy -Ursprüngliche Nachricht- Von: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] Auftrag von Rob van der Heij Gesendet: Freitag, 4. Januar 2008 14:17 An: IBMVM@LISTSERV.UARK.EDU Betreff: Re: z/VM 5.2 Absurd System shutdown - PJBR On Jan 4, 2008 2:09 PM, Fritz, Wilhelm [EMAIL PROTECTED] wrote: Why does your paging device start on cyl 0?!?: Shouldn't it start on Cyl 1, like 520PAG? Does not have to. CP knows enough to stay out of the first track(s) but I think most folks do keep the first cylinder out. In his case, those might be the only tracks where CP could page on that disk :-) Rob
z/VM 5.2 Absurd System shutdown - PJBR
Well, I have been reading system directory and the fact of starting the page area in cyl. 0 doesn't seem to be the cause of this problem. Originally the system-defined system page area is defined as: USER $PAGE$ NOLOG MDISK A03 3390 000 END 520PAG R MDISK A04 3390 000 END 520PG1 R-- This is the one we added later, the one causing the problem. * So, as you can see, the system-default defined one also starts in cyl. 0. *** z/VM INSTALLATION DASD FORMAT/RESTORE *** PACKDASD DASD VIRTUAL TAPE DO NOT TYPELABELADDRESS ADDRESS FORMAT DASD == = == = RES 520RES314_ 181 _ SPOOL 520SPL315_ PAGE520PAG33F_ USER520W01368_ USER520W02369_ HCPIIX8377R YOU HAVE SELECTED TO FORMAT THE FOLLOWING DASD: 520RES 0314 520SPL 0315 520PAG 033F -- original page area device 520W01 0368 520W02 0369 DO YOU WANT TO CONTINUE ? (Y/N) Y HCPIIX8490I NOW FORMATTING DASD 0314 HCPIIX8490I NOW FORMATTING DASD 0315 HCPIIX8490I NOW FORMATTING DASD 033F -- Here being formatted END OF JOB HCPIIX8490I NOW ALLOCATING DASD 0314 (RES PACK) HCPIIX8490I NOW ALLOCATING DASD 0315 (SPOOLING) HCPIIX8490I NOW ALLOCATING DASD 033F (PAGING)-- Here being allocated. Could it be here the difference ? HCPINI8392I INSTIIS EXEC ENDED SUCCESSFULLY Ready; The difference must reside in that 1-3338 must have been performed at alloc time (at z/VM installation time) instead of 0-3338 which is what we have (erroneously ?) done. So, we're going to define a new page device equally directory-defined as 520PAG (that is, 0-END), then we're going to CPFMTXA FORMAT it and then ALLOCATE 1-3338 this time. If this problem still persists (we have formatted the disk and allocated it exactly like 520PAG, so same definition should imply same functioning) we better search for a new job, like Bill Gates. Do you agree with this plan ? Saludos, José R. Barón Dpto. Sistemas CALCULO S. A. Tel. 91 330 86 44 e-mail: [EMAIL PROTECTED] P No imprima este e-mail si no es realmente necesario -Mensaje original- De: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] En nombre de Kris Buelens Enviado el: lunes, 07 de enero de 2008 8:46 Para: IBMVM@LISTSERV.UARK.EDU Asunto: Re: AW: z/VM 5.2 Absurd System shutdown - PJBR I tried them all again: PAGE, SPOL, TDSK is protected: Ready KRIS at VMKBCT01 ; T=0.01/0.01 08:33:08 link * 1 1 MR cse Ready KRIS at VMKBCT01 ; T=0.01/0.01 08:33:13 link * 2 2 MR DRCT Ready KRIS at VMKBCT01 ; T=0.01/0.01 08:33:18 link * 3 3 MR PAGE HCPLNM1152E KRIS 0003 has not been linked because it would overlap system paging space. Ready KRIS at VMKBCT01 (01152); T=0.01/0.01 08:33:22 link * 4 4 MR Spool HCPLNM1152E KRIS 0004 has not been linked because it would overlap system spool space. Ready KRIS at VMKBCT01 (01152); T=0.01/0.01 08:33:27 link * 5 5 MR ckpt Ready KRIS at VMKBCT01 ; T=0.01/0.01 08:33:31 link * 6 6 MR Warm Ready KRIS at VMKBCT01 ; T=0.01/0.01 08:33:35 link * 7 7 MR Tdsk HCPLNM1152E KRIS 0007 has not been linked because it would overlap system temporary disk space. Ready KRIS at VMKBCT01 (01152); T=0.01/0.01 08:33:38 So the problem is probably caused by that the page area was never properly formatted. 2008/1/7, Alan Ackerman [EMAIL PROTECTED]: On Fri, 4 Jan 2008 14:09:05 +0100, Fritz, Wilhelm [EMAIL PROTECTED] wr ote: Sounds like you have some other minidisk defined overlaying your page spa ce. When one of your virtual machines writes to it, it causes paging errors. Take a look at your directory. You should have NO other minidisks defined in the range 0-3338 on device 520PG1 02D5. (Or overlaying the other page pack, either.) Alan Ackerman Alan (dot) Ackerman (at) Bank of America (dot) com -- Kris Buelens, IBM Belgium, VM customer support
z/VM 5.2 Absurd System shutdown - PJBR
Hi, list. We are experiencing some problems with unpredictable and so far inevitable system shutdowns for aparently unknown reasons. - We are running 4 SLES9 Linux images under z/VM 5.2 - If we keep only 3 images, this problem doesn't seem to appear. It has happened only with 4 images running at once. - OPERATOR 191 console registers suddenly (but it can be like this for HOURS) the following message: xx:yy:zz HCPPAW415E Six continuous paging errors have occurred on DASD 02D5 volume 520PG1. (this message appears some 25-30 times per second) - Disk 2D5 has been hardware-checked successfully, so it has no hardware errors. - Latest RSU has been applied by IBM-advise. This is our level: q cplevel z/VM Version 5 Release 2.0, service level 0702 (64-bit) Generated at 12/21/07 19:33:42 MAI IPL at 01/04/08 11:46:43 MAI Ready; q cmslevel CMS Level 22, Service Level 702 Ready; - These were some system indicators at the time of the latest shutdown: PROCESSOR = AVGPROC-009% 01 MDC READS-00/SEC WRITES-00/SEC HIT RATIO-000% PAGING-2/SEC STEAL-000% Q0-1(0) DORMANT-00018 Q1-0(0) E1-0(0) Q2-0(0) EXPAN-001 E2-0(0) Q3-4(0) EXPAN-001 E3-0(0) PROC -009% LIMITED-0 PAGE AREAS == EXTENT EXTENT TOTAL PAGES HIGH% VOLID RDEV STARTEND PAGES IN USE PAGE USED -- -- -- -- -- -- 520PAG 033F 1 3338 600840 30602 31676 5% 520PG1 02D5 0 3338 601020 11660 11835 1% -- -- SUMMARY1174K 42262 3% USABLE 1174K 42262 3% SPOOL AREA == EXTENT EXTENT TOTAL PAGES HIGH% VOLID RDEV STARTEND PAGES IN USE PAGE USED -- -- -- -- -- -- 520SPL 0315 1 3338 600840 118407 160305 19% -- -- SUMMARY 600840 118407 19% USABLE600840 118407 19% * * * End of File * * * - So it shows neither PAGE nor SPOOL bottleneck. CPU values are also acceptably low. - We have 8 GB total RAM in this LPAR. - Our Linux RAM definitions are: USER LINUX1 LINUX1 3G3G BG USER LINUX2 LINUX2 2560M 2560M BG USER LINUX3 LINUX3 2560M 2560M BG USER LINUX4 LINUX4 256M 256M BG - Aparently no great usage of system resources was being done at the time of shutdown (see above). Any help will be extremely welcome !! Saludos, Best Regards, José R. Barón Dpto. Sistemas CALCULO S. A. Tel. 91 330 86 44 e-mail: [EMAIL PROTECTED] Do not print this e-mail unless necessary
Re: Virtual Storage Capacity Exceeded - PJBR
Yes, it runs above 16M. The problem arises when displaying a COBOL map, always at the same point. We are considering splitting the application into smaller pieces to see if it works this way. Saludos, José R. Barón Dpto. Sistemas CALCULO S. A. Tel. 91 330 86 44 e-mail: [EMAIL PROTECTED] P No imprima este e-mail si no es realmente necesario -Mensaje original- De: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] En nombre de Stracka, James (GTI) Enviado el: martes, 13 de noviembre de 2007 17:31 Para: IBMVM@LISTSERV.UARK.EDU Asunto: Re: Virtual Storage Capacity Exceeded - PJBR Just a guess, but will this COBOL program run above 16M? There were problems with old programs that had to be recompiled to run above 16M awhile back. -Original Message- From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Jose Raul Baron Sent: Tuesday, November 13, 2007 10:59 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Virtual Storage Capacity Exceeded - PJBR Hi list, We have a problem running an OLTP application. The scenario is a z/VM 4.4 user running a VAG Cobol application against a DB2/VM database. At a certain point, when trying to load the third map inside the same application (maps 1 + 2 have already been loaded) we find the following error: DMSSMN109S Virtual storage capacity exceeded CEE0374C CONDITION = CEE3250C TOKEN = 00040CB2 61C3C5C5 WHILE RUNNING PROGRAM UNKNOWN AT THE TIME OF INTERRUPT PSW GPR 0-3 0400 0480A000 080A GPR 4-7 00F127EC 80F2BDE0 00CF6C98 80CF4B30 GPR 8-B 00D0D068 00CF6C9C 00F34D08 00EE3010 GPR C-F 00F2BC28 00D00500 80F2C194 FLT 0-2 441C2000 4E00039DE21D FLT 4-6 4E025E7A 01839560 DMSABE148T System abend 80A called from 008274DE CMS If I query for virtual storage this is what I get: q v stor STORAGE = 64M Ready; We have tried to increase the virtual storage for this user up to 512M but the result made no change. The last instructions it executes successfully are: EZERESRC-SCHED 1153* /* * Proceso repetitivo principal ** EZERESRC-SCHED 1154* MOVE 'SI' TO ERROR; EZERESRC-SCHED 1155* MOVE 'NO' TO GRABAR; EZERESRC-SCHED 1156* WHILE ERROR EQ 'SI' EZERESRC-SCHED 1157* OR GRABAR EQ 'NO'; EZERESRC-SCHED 1158* SXHCPMAPI(); /* Converse mapa SXHCPMAPI 0850* MOVE X000W01 TO SXHCM0I; /* datos a mapa SXHCPMAPI 0851* MOVE SXHCM00 TO SXHCM0I; SXHCPMAPI 0852* MOVE EZETIM TO SXHCM0I.HORA; /* hora SXHCPMAPI 0853* /* SXHCPMAPI 0854* /* SXHCPMAPI 0855* The last line (0855) should be a map converse but it is THEN when it crashes. This is the VAGEN COBOL source code for line 0855: 000855* MOVE SPACES TO TRACE-STRING OF EZERTS-STMTTR-REQUEST-BLOCK MOVE 000855* TO TRACE-STRING OF EZERTS-STMTTR-REQUEST-BLOCK(1:8) PERFORM EZEAPP-STATEMENT-TRACE PERFORM EZECONV-EZEP-4 Any ideas are most welcome. Thanks in advance, Saludos, José R. Barón Dpto. Sistemas CALCULO S. A. Tel. 91 330 86 44 e-mail: [EMAIL PROTECTED] This message w/attachments (message) may be privileged, confidential or proprietary, and if you are not an intended recipient, please notify the sender, do not use or share it and delete it. Unless specifically indicated, this message is not an offer to sell or a solicitation of any investment products or other financial product or service, an official confirmation of any transaction, or an official statement of Merrill Lynch. Subject to applicable law, Merrill Lynch may monitor, review and retain e-communications (EC) traveling through its networks/systems. The laws of the country of each sender/recipient may impact the handling of EC, and EC may be archived, supervised and produced in countries other than the country in which you are located. This message cannot be guaranteed to be secure or error-free. This message is subject to terms available at the following link: http://www.ml.com/e-communications_terms/. By messaging with Merrill Lynch you consent to the foregoing.
LE problem when RUNNING PROGRAM UNKNOWN - PJBR
Hi list, We are having a problem on a COBOL/VM application attacking a DB2/Linux database scenario at a certain point. It doesn't occur constantly but still it's a situation we must fix. ARI0717I Start SQLINIT EXEC: 11/26/07 14:31:00 MAI. ARI6042I Warning: Application server LNXGES has not been generated on this processor. Ignore this message if the server has been defined as a global resource on another processor. ARI0320I The default server name is LNXGES. ARI0796I End SQLINIT EXEC: 11/26/07 14:31:00 MAI Bienvenido al programa ELARUN EXEC !! CEE0374C CONDITION = CEE3250C TOKEN = 00040CB2 61C3C5C5 WHILE RUNNING PROGRAM UNKNOWN AT THE TIME OF INTERRUPT PSW GPR 0-3 00F8 00F8 2398 002F GPR 4-7 00F37FFE 0001 0001 01FFFCC4 GPR 8-B 01FFF7E8 0004 01FFF000 GPR C-F 01071950 01FFF904 810723E8 00F52130 FLT 0-2 43E1 4E0003B0FEE0 FLT 4-6 4E025E87 01839560 CMS We really can't imagine what the cause of it could be. I have found out that this machine is the only one with 32M defined in the VM directory. I have equaled it to the rest of the machines (the rest don't get this message) at 64M just in case that this might help. Yet I'm not very confident in this solution. Could anybody help, please ? Thanks in advance, Saludos, José R. Barón Dpto. Sistemas CALCULO S. A. Tel. 91 330 86 44 e-mail: [EMAIL PROTECTED]
Virtual Storage Capacity Exceeded - PJBR
Hi list, We have a problem running an OLTP application. The scenario is a z/VM 4.4 user running a VAG Cobol application against a DB2/VM database. At a certain point, when trying to load the third map inside the same application (maps 1 + 2 have already been loaded) we find the following error: DMSSMN109S Virtual storage capacity exceeded CEE0374C CONDITION = CEE3250C TOKEN = 00040CB2 61C3C5C5 WHILE RUNNING PROGRAM UNKNOWN AT THE TIME OF INTERRUPT PSW GPR 0-3 0400 0480A000 080A GPR 4-7 00F127EC 80F2BDE0 00CF6C98 80CF4B30 GPR 8-B 00D0D068 00CF6C9C 00F34D08 00EE3010 GPR C-F 00F2BC28 00D00500 80F2C194 FLT 0-2 441C2000 4E00039DE21D FLT 4-6 4E025E7A 01839560 DMSABE148T System abend 80A called from 008274DE CMS If I query for virtual storage this is what I get: q v stor STORAGE = 64M Ready; We have tried to increase the virtual storage for this user up to 512M but the result made no change. The last instructions it executes successfully are: EZERESRC-SCHED 1153* /* * Proceso repetitivo principal ** EZERESRC-SCHED 1154* MOVE 'SI' TO ERROR; EZERESRC-SCHED 1155* MOVE 'NO' TO GRABAR; EZERESRC-SCHED 1156* WHILE ERROR EQ 'SI' EZERESRC-SCHED 1157* OR GRABAR EQ 'NO'; EZERESRC-SCHED 1158* SXHCPMAPI(); /* Converse mapa SXHCPMAPI 0850* MOVE X000W01 TO SXHCM0I; /* datos a mapa SXHCPMAPI 0851* MOVE SXHCM00 TO SXHCM0I; SXHCPMAPI 0852* MOVE EZETIM TO SXHCM0I.HORA; /* hora SXHCPMAPI 0853* /* SXHCPMAPI 0854* /* SXHCPMAPI 0855* The last line (0855) should be a map converse but it is THEN when it crashes. This is the VAGEN COBOL source code for line 0855: 000855* MOVE SPACES TO TRACE-STRING OF EZERTS-STMTTR-REQUEST-BLOCK MOVE 000855* TO TRACE-STRING OF EZERTS-STMTTR-REQUEST-BLOCK(1:8) PERFORM EZEAPP-STATEMENT-TRACE PERFORM EZECONV-EZEP-4 Any ideas are most welcome. Thanks in advance, Saludos, José R. Barón Dpto. Sistemas CALCULO S. A. Tel. 91 330 86 44 e-mail: [EMAIL PROTECTED]
Re: Question on LINUX
Certainly. I have done it from www.opensuse.org I think they have currently version 10. That's at least the one I managed to download. BRGDS, Saludos, José R. Barón Dpto. Sistemas CALCULO S. A. _ De: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] En nombre de Edward M. Martin Enviado el: miércoles, 24 de enero de 2007 16:35 Para: IBMVM@LISTSERV.UARK.EDU Asunto: Re: Question on LINUX Hello Paul, Rich, and everyone else, Thank you for the info. Is there a site that I could download a z/VM SuSE system? Or even a SuSE system for a INTEL system? The basic idea is to get people here comfortable with LINUX (get them involved). I have loaded software, proved it works (single user, trial, etc). Then have gone back to get the REAL product and re-installed. Usually with much improved results. Ed Martin Aultman Health Foundation 330-588-4723 [EMAIL PROTECTED] ext. 40441 _ From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Paul Raulerson Sent: Wednesday, January 24, 2007 9:59 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: Question on LINUX There are no costs that *have* to be incurred. However, all the zLinux companies will try their best to get you to buy their Patch/Fix support. For SuSE that has been less than $5K/year, but I understand the price has not 'gone up' a bit. Don't have the details at this time, but I expect they will make something fairly reasonable available. Once you have a copy up and running it is pretty rare to need to change it, especially in a production environment. And the system is solid as a rock, especially under z/VM. One note - don't expect good support on zLinux from anyone- including IBM. All of the support people are basically Intel people, and don't have much of a clue of the difference between DASD and a harddisk - and no idea about how things like FICON work. SuSE has some really good people in place who can help out, but getting to them can be a challenge. On the flip side - it is cheap and works really well. -Paul
DMSITP143T Operation exception SVC 18
Hi everyone. We have experienced the problem DMSITP143T Operation exception occurred at 80E2778A in system routine SVC 18; re-IPL CMS with about 50 VAGEN users attacking a DB2/VM 7.3 database. Suddenly, at a certain time, all the users running the application get in to CP READ state, all at a time with no apparent reason. No dump, No Operato r Console entry, simply nothing I could have a look at. We use z/VM 4.4. Has anyone experienced this problem before or does anybo dy have an idea of where the problem could possibly rely on ? Any idea will be very welcome. BRGDS, Raul Baron
Re: DMSITP143T Operation exception SVC 18
Hi, DJ, The machines issuing the DMSITP143T are the end VAGEN end user Virtual Machines, NOT the database. Thanks for your quick response. Saludos, José R. Barón Dpto. Sistemas CALCULO S. A. Tel. 91 330 86 44 e-mail: [EMAIL PROTECTED] -Mensaje original- De: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] En nombre de Dave Jones Enviado el: jueves, 23 de noviembre de 2006 17:49 Para: IBMVM@LISTSERV.UARK.EDU Asunto: Re: DMSITP143T Operation exception SVC 18 Hi, Rual. In CMS, SVC 18 is OS simulation of the PDS BLDL/FIND macro. What virtual machine is issuing the DMSITP143T message; is it one of the end user (VAGEN) virtual machines or is it the DB2/VM server? If it is the DB2/VM server, I would open a PMR with the DB2 group at IBM. Good luck. DJ Jose Raul Baron wrote: Hi everyone. We have experienced the problem DMSITP143T Operation exception occurred at 80E2778A in system routine SVC 18; re-IPL CMS with about 50 VAGEN users attacking a DB2/VM 7.3 database. Suddenly, at a certain time, all the users running the application get into CP READ state, all at a time with no apparent reason. No dump, No Operator Console entry, simply nothing I could have a look at. We use z/VM 4.4. Has anyone experienced this problem before or does anybody have an idea of where the problem could possibly rely on ? Any idea will be very welcome. BRGDS, Raul Baron
