Re: A little OT z/LIINUX
Thanks to the excellent assistance from NOVELL Tech Support the problem is solved. The answer is net MASK was wrong and I had the wrong GATEWAY IP... On Mon, Sep 20, 2010 at 10:11 PM, Alan Altmark alan_altm...@us.ibm.comwrote: On Monday, 09/20/2010 at 05:05 EDT, Tom Huegel tehue...@gmail.com wrote: Thanks everyone for the tips, I have tried them all but still nothing. CP TRACE IO showed that there was NO IO when trying to logon from the PC. I did get IO (then a rejection) when trying to telnet from CMS. I don't know the network guy says I an passing through the firewall. FWIW, you won't see any I/O for OSAs except during initialization. Once started, they use QDIO, which is similar to a never-ending channel program. Alan Altmark z/VM and Linux on System z Consultant IBM System Lab Services and Training ibm.com/systems/services/labservices office: 607.429.3323 alan_altm...@us.ibm.com IBM Endicott
Re: A little OT z/LIINUX
Tom, Check your PuTTY SSH tab to be sure you are using SSH protocol version 2. Version 1 will not work with SUSE or SLES. Bob From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Tom Huegel Sent: Saturday, September 18, 2010 6:42 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: A little OT z/LIINUX Ofcourse LINUX rejects my port 23 connection that was expected, the point was the VSWITCH works. Ping from windows doesn't work, but I can't ping VM either, although my tn3270 works fine. I think the network blocks pings.. I'll try TRACERT Monday.. CP TRACE I/O on z/LINUX will help. On Fri, Sep 17, 2010 at 6:01 PM, Davis, Larry (National VM/VSE Capability) larry.dav...@hp.com wrote: The reason Linux rejects the telnet from CMS is TELNET on CMS is using port 23 and Linux is only excepting connections on port 22 for SSH you can telnet to the linux image on port 22 from CMS using the command TELNET host 22 See if you get a connection, or at least a message that the client refused connection. If you are using a windows machine try to ping and tracert from your PC to the Linux image send this data to the network guys Larry Davis From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Tom Huegel Sent: Friday, September 17, 2010 6:33 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: A little OT z/LIINUX I can ping the CLIENT from CMS, also from CMS I can Telnet to the CLIENT (it gets rejected by LINUX). I'm quite sure the VSWITCH isn't a problem.. I guess my question has been answered.. It's the network guys ... AGAIN. On Fri, Sep 17, 2010 at 2:35 PM, Davis, Larry (National VM/VSE Capability) larry.dav...@hp.com wrote: Make sure the firewall allows port 22 and that the netmask at the switch allows addresses to the OSA If you are using a VSWITCH enter the command Q VSWITCH switch name DETAIL and paste the response here. Also , if you are using a VSWITCH did you authorize the client (VM user ID) access to the vswitch. Larry Davis From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Tom Huegel Sent: Friday, September 17, 2010 5:15 PM To: IBMVM@LISTSERV.UARK.EDU Subject: A little OT z/LIINUX Looking for a little help. I'm trying to install a z/LINUX (SUSE 10) and things went along well to install the starter system and start CLIENT.. but what next? These are the last messages I get from the CLIENT. *** sshd has been started *** *** login using 'ssh -X r...@172.17.51.121' *** *** run 'yast' to start the installation *** At this point what do I do? The 3270 screen won't take any input. If I try to PuTTY into the CLIENT I cannot connect. Any suggestions? Thanks Tom This electronic transmission and any documents accompanying this electronic transmission contain confidential information belonging to the sender. This information may be legally privileged. The information is intended only for the use of the individual or entity named above. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or the taking of any action in reliance on or regarding the contents of this electronically transmitted information is strictly prohibited.
Re: A little OT z/LIINUX
Thanks everyone for the tips, I have tried them all but still nothing. CP TRACE IO showed that there was NO IO when trying to logon from the PC. I did get IO (then a rejection) when trying to telnet from CMS. I don't know the network guy says I an passing through the firewall. %$...@! On Mon, Sep 20, 2010 at 7:56 AM, Bob Levad ble...@winnebagoind.com wrote: Tom, Check your PuTTY SSH tab to be sure you are using SSH protocol version 2. Version 1 will not work with SUSE or SLES. Bob *From:* The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] *On Behalf Of *Tom Huegel *Sent:* Saturday, September 18, 2010 6:42 AM *To:* IBMVM@LISTSERV.UARK.EDU *Subject:* Re: A little OT z/LIINUX Ofcourse LINUX rejects my port 23 connection that was expected, the point was the VSWITCH works. Ping from windows doesn't work, but I can't ping VM either, although my tn3270 works fine. I think the network blocks pings.. I'll try TRACERT Monday.. CP TRACE I/O on z/LINUX will help. On Fri, Sep 17, 2010 at 6:01 PM, Davis, Larry (National VM/VSE Capability) larry.dav...@hp.com wrote: The reason Linux rejects the telnet from CMS is TELNET on CMS is using port 23 and Linux is only excepting connections on port 22 for SSH you can telnet to the linux image on port 22 from CMS using the command TELNET host 22 See if you get a connection, or at least a message that the client refused connection. If you are using a windows machine try to ping and tracert from your PC to the Linux image send this data to the network guys Larry Davis *From:* The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] *On Behalf Of *Tom Huegel *Sent:* Friday, September 17, 2010 6:33 PM *To:* IBMVM@LISTSERV.UARK.EDU *Subject:* Re: A little OT z/LIINUX I can ping the CLIENT from CMS, also from CMS I can Telnet to the CLIENT (it gets rejected by LINUX). I'm quite sure the VSWITCH isn't a problem.. I guess my question has been answered.. It's the network guys ... AGAIN. On Fri, Sep 17, 2010 at 2:35 PM, Davis, Larry (National VM/VSE Capability) larry.dav...@hp.com wrote: Make sure the firewall allows port 22 and that the netmask at the switch allows addresses to the OSA If you are using a VSWITCH enter the command Q VSWITCH switch name DETAIL and paste the response here. Also , if you are using a VSWITCH did you authorize the client (VM user ID) access to the vswitch. Larry Davis *From:* The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] *On Behalf Of *Tom Huegel *Sent:* Friday, September 17, 2010 5:15 PM *To:* IBMVM@LISTSERV.UARK.EDU *Subject:* A little OT z/LIINUX Looking for a little help. I'm trying to install a z/LINUX (SUSE 10) and things went along well to install the starter system and start CLIENT.. but what next? These are the last messages I get from the CLIENT. *** sshd has been started *** *** login using 'ssh -X r...@172.17.51.121' *** *** run 'yast' to start the installation *** At this point what do I do? The 3270 screen won't take any input. If I try to PuTTY into the CLIENT I cannot connect. Any suggestions? Thanks Tom This electronic transmission and any documents accompanying this electronic transmission contain confidential information belonging to the sender. This information may be legally privileged. The information is intended only for the use of the individual or entity named above. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or the taking of any action in reliance on or regarding the contents of this electronically transmitted information is strictly prohibited.
Re: A little OT z/LIINUX
On 9/20/2010 at 05:05 PM, Tom Huegel tehue...@gmail.com wrote: Thanks everyone for the tips, I have tried them all but still nothing. CP TRACE IO showed that there was NO IO when trying to logon from the PC. I did get IO (then a rejection) when trying to telnet from CMS. I don't know the network guy says I an passing through the firewall. %$...@! Please contact me off-list. Mark Post Novell Technical Support
Re: A little OT z/LIINUX
On Monday, 09/20/2010 at 05:05 EDT, Tom Huegel tehue...@gmail.com wrote: Thanks everyone for the tips, I have tried them all but still nothing. CP TRACE IO showed that there was NO IO when trying to logon from the PC. I did get IO (then a rejection) when trying to telnet from CMS. I don't know the network guy says I an passing through the firewall. FWIW, you won't see any I/O for OSAs except during initialization. Once started, they use QDIO, which is similar to a never-ending channel program. Alan Altmark z/VM and Linux on System z Consultant IBM System Lab Services and Training ibm.com/systems/services/labservices office: 607.429.3323 alan_altm...@us.ibm.com IBM Endicott
Re: A little OT z/LIINUX
Ofcourse LINUX rejects my port 23 connection that was expected, the point was the VSWITCH works. Ping from windows doesn't work, but I can't ping VM either, although my tn3270 works fine. I think the network blocks pings.. I'll try TRACERT Monday.. CP TRACE I/O on z/LINUX will help. On Fri, Sep 17, 2010 at 6:01 PM, Davis, Larry (National VM/VSE Capability) larry.dav...@hp.com wrote: The reason Linux rejects the telnet from CMS is TELNET on CMS is using port 23 and Linux is only excepting connections on port 22 for SSH you can telnet to the linux image on port 22 from CMS using the command TELNET host 22 See if you get a connection, or at least a message that the client refused connection. If you are using a windows machine try to ping and tracert from your PC to the Linux image send this data to the network guys Larry Davis** *From:* The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] *On Behalf Of *Tom Huegel *Sent:* Friday, September 17, 2010 6:33 PM *To:* IBMVM@LISTSERV.UARK.EDU *Subject:* Re: A little OT z/LIINUX I can ping the CLIENT from CMS, also from CMS I can Telnet to the CLIENT (it gets rejected by LINUX). I'm quite sure the VSWITCH isn't a problem.. I guess my question has been answered.. It's the network guys ... AGAIN. On Fri, Sep 17, 2010 at 2:35 PM, Davis, Larry (National VM/VSE Capability) larry.dav...@hp.com wrote: Make sure the firewall allows port 22 and that the netmask at the switch allows addresses to the OSA If you are using a VSWITCH enter the command Q VSWITCH switch name DETAIL and paste the response here. Also , if you are using a VSWITCH did you authorize the client (VM user ID) access to the vswitch. Larry Davis *From:* The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] *On Behalf Of *Tom Huegel *Sent:* Friday, September 17, 2010 5:15 PM *To:* IBMVM@LISTSERV.UARK.EDU *Subject:* A little OT z/LIINUX Looking for a little help. I'm trying to install a z/LINUX (SUSE 10) and things went along well to install the starter system and start CLIENT.. but what next? These are the last messages I get from the CLIENT. *** sshd has been started *** *** login using 'ssh -X r...@172.17.51.121' *** *** run 'yast' to start the installation *** At this point what do I do? The 3270 screen won't take any input. If I try to PuTTY into the CLIENT I cannot connect. Any suggestions? Thanks Tom
A little OT z/LIINUX
Looking for a little help. I'm trying to install a z/LINUX (SUSE 10) and things went along well to install the starter system and start CLIENT.. but what next? These are the last messages I get from the CLIENT. *** sshd has been started *** *** login using 'ssh -X r...@172.17.51.121' *** *** run 'yast' to start the installation *** At this point what do I do? The 3270 screen won't take any input. If I try to PuTTY into the CLIENT I cannot connect. Any suggestions? Thanks Tom
Re: A little OT z/LIINUX
May be a network configuration issue? Is the client ping'able from your PC? Check all your network configurations z/VM, vswitch and parm file and make sure they are correct. If you are using a vswitch make sure you grant guess access to the vswitch. You may be able to get a shell from 3270 session it you hit enter couple of time. If you are able to, then you could also enter some Linux commands to check. Since the 3270 is a line mode console remember NOT to enter any commands that will require interaction, example vi. Ashwin From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Tom Huegel Sent: Friday, September 17, 2010 4:15 PM To: IBMVM@LISTSERV.UARK.EDU Subject: A little OT z/LIINUX Looking for a little help. I'm trying to install a z/LINUX (SUSE 10) and things went along well to install the starter system and start CLIENT.. but what next? These are the last messages I get from the CLIENT. *** sshd has been started *** *** login using 'ssh -X r...@172.17.51.121'mailto:r...@172.17.51.121' *** *** run 'yast' to start the installation *** At this point what do I do? The 3270 screen won't take any input. If I try to PuTTY into the CLIENT I cannot connect. Any suggestions? Thanks Tom
Re: A little OT z/LIINUX
Use Putty to connect to 172.17.71.121 When prompted for the user ID enter root And when prompted for the password enter the password you supplied when you configured the client. Putty can be downloaded from many places try here http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html Larry Davis From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Tom Huegel Sent: Friday, September 17, 2010 5:15 PM To: IBMVM@LISTSERV.UARK.EDU Subject: A little OT z/LIINUX Looking for a little help. I'm trying to install a z/LINUX (SUSE 10) and things went along well to install the starter system and start CLIENT.. but what next? These are the last messages I get from the CLIENT. *** sshd has been started *** *** login using 'ssh -X r...@172.17.51.121'mailto:r...@172.17.51.121' *** *** run 'yast' to start the installation *** At this point what do I do? The 3270 screen won't take any input. If I try to PuTTY into the CLIENT I cannot connect. Any suggestions? Thanks Tom
Re: A little OT z/LIINUX
Make sure the firewall allows port 22 and that the netmask at the switch allows addresses to the OSA If you are using a VSWITCH enter the command Q VSWITCH switch name DETAIL and paste the response here. Also , if you are using a VSWITCH did you authorize the client (VM user ID) access to the vswitch. Larry Davis From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Tom Huegel Sent: Friday, September 17, 2010 5:15 PM To: IBMVM@LISTSERV.UARK.EDU Subject: A little OT z/LIINUX Looking for a little help. I'm trying to install a z/LINUX (SUSE 10) and things went along well to install the starter system and start CLIENT.. but what next? These are the last messages I get from the CLIENT. *** sshd has been started *** *** login using 'ssh -X r...@172.17.51.121'mailto:r...@172.17.51.121' *** *** run 'yast' to start the installation *** At this point what do I do? The 3270 screen won't take any input. If I try to PuTTY into the CLIENT I cannot connect. Any suggestions? Thanks Tom
Re: A little OT z/LIINUX
I can ping the CLIENT from CMS, also from CMS I can Telnet to the CLIENT (it gets rejected by LINUX). I'm quite sure the VSWITCH isn't a problem.. I guess my question has been answered.. It's the network guys ... AGAIN. On Fri, Sep 17, 2010 at 2:35 PM, Davis, Larry (National VM/VSE Capability) larry.dav...@hp.com wrote: Make sure the firewall allows port 22 and that the netmask at the switch allows addresses to the OSA If you are using a VSWITCH enter the command Q VSWITCH switch name DETAIL and paste the response here. Also , if you are using a VSWITCH did you authorize the client (VM user ID) access to the vswitch. Larry Davis** *From:* The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] *On Behalf Of *Tom Huegel *Sent:* Friday, September 17, 2010 5:15 PM *To:* IBMVM@LISTSERV.UARK.EDU *Subject:* A little OT z/LIINUX Looking for a little help. I'm trying to install a z/LINUX (SUSE 10) and things went along well to install the starter system and start CLIENT.. but what next? These are the last messages I get from the CLIENT. *** sshd has been started *** *** login using 'ssh -X r...@172.17.51.121' *** *** run 'yast' to start the installation *** At this point what do I do? The 3270 screen won't take any input. If I try to PuTTY into the CLIENT I cannot connect. Any suggestions? Thanks Tom
Re: A little OT z/LIINUX
The reason Linux rejects the telnet from CMS is TELNET on CMS is using port 23 and Linux is only excepting connections on port 22 for SSH you can telnet to the linux image on port 22 from CMS using the command TELNET host 22 See if you get a connection, or at least a message that the client refused connection. If you are using a windows machine try to ping and tracert from your PC to the Linux image send this data to the network guys Larry Davis From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Tom Huegel Sent: Friday, September 17, 2010 6:33 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: A little OT z/LIINUX I can ping the CLIENT from CMS, also from CMS I can Telnet to the CLIENT (it gets rejected by LINUX). I'm quite sure the VSWITCH isn't a problem.. I guess my question has been answered.. It's the network guys ... AGAIN. On Fri, Sep 17, 2010 at 2:35 PM, Davis, Larry (National VM/VSE Capability) larry.dav...@hp.commailto:larry.dav...@hp.com wrote: Make sure the firewall allows port 22 and that the netmask at the switch allows addresses to the OSA If you are using a VSWITCH enter the command Q VSWITCH switch name DETAIL and paste the response here. Also , if you are using a VSWITCH did you authorize the client (VM user ID) access to the vswitch. Larry Davis From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDUmailto:IBMVM@LISTSERV.UARK.EDU] On Behalf Of Tom Huegel Sent: Friday, September 17, 2010 5:15 PM To: IBMVM@LISTSERV.UARK.EDUmailto:IBMVM@LISTSERV.UARK.EDU Subject: A little OT z/LIINUX Looking for a little help. I'm trying to install a z/LINUX (SUSE 10) and things went along well to install the starter system and start CLIENT.. but what next? These are the last messages I get from the CLIENT. *** sshd has been started *** *** login using 'ssh -X r...@172.17.51.121'mailto:r...@172.17.51.121' *** *** run 'yast' to start the installation *** At this point what do I do? The 3270 screen won't take any input. If I try to PuTTY into the CLIENT I cannot connect. Any suggestions? Thanks Tom