Re: Command to list details about the exisitng partitions / guest on zVM
The IND USER tells that CMS is IPLed (IPLSYS=CMS) Often Linuxes IPL CMS first to execute a PROFILE EXEC, a logon script in which one could prepare a better virtual machine environment for LINUX that will be started. Such a PROFILE EXEC would at the end probably boot LINUX, or test if it runs disconnected of not - if disconnected: start LINUX - else leave the user in front of the terminal in CMS to give him a chance to do extra things. A nice PROFILE EXEC would than tell how the console how to start LINUX. So: - #CP IND USER to confirm you IPLed CMS - if so, #CP IPL CMS (press enter on the VM READ that comes) - look at the terminal messages If nothing tells you how to start LINUX and you are still in CMS: - XEDIT PROFILE EXEC A and start reading to see what it does 2007/10/23, GnanaShekar Subramani <[EMAIL PROTECTED]>: > > > FYI > > LOGON LINUXFTP > z/VM Version 5 Release 2.0, Service Level 0602 (64-bit), > built on IBM Virtualization Technology > There is no logmsg data > FILES: NO RDR, NO PRT, NO PUN > RECONNECTED AT 17:02:49 PDT MONDAY 10/22/07 > > CMS > > > IND USER LINUXFTP > USERID=LINUXFTP MACH=ESA STOR=512M VIRT=V XSTORE=NONE > IPLSYS=CMS DEVNUM=00016 > PAGES: RES=0952 WS=0931 LOCKEDREAL= RESVD= > NPREF= PREF= READS=0018 WRITES=0008 > XSTORE=00 READS=00 WRITES=00 MIGRATES=00 > CPU 00: CTIME=69:17 VTIME=000:00 TTIME=000:00 IO=000599 > RDR=00 PRT=00 PCH=00 > > > , > >,RUNNING > BEADEV1 ,, > Thanks & Regards, > -GnanaShekar- > > > On 10/23/07, GnanaShekar Subramani <[EMAIL PROTECTED]> wrote: > > > > Hi, > > > > Thanks a lot for the detailed explanation. > > > > You were right, LINUXFTP was running linux. But I was unable to connect > > to it using "putty-ssh or telnet" session. I was only able to "ftp" from > > the dos prompt. > > > > Now, when I login as LINUXFTP; all it display is CMS. I guess I did > > something like a LOGOFF without being aware of the consequence. > > > > Thanks & Regards, > > -GnanaShekar- > > > -- Kris Buelens, IBM Belgium, VM customer support
Re: Command to list details about the exisitng partitions / guest on zVM
Hi, Thanks a lot for the detailed explanation. You were right, LINUXFTP was running linux. But I was unable to connect to it using "putty-ssh or telnet" session. I was only able to "ftp" from the dos prompt. Now, when I login as LINUXFTP; all it display is CMS. I guess I did something like a LOGOFF without being aware of the consequence. Thanks & Regards, -GnanaShekar- On 10/22/07, RPN01 <[EMAIL PROTECTED]> wrote: > > Thanks for the console log; The most interesting command you've shown here > is: > > QUERY NAMES > > LINUXFTP - DSC , PERFSVM - DSC , TCPIP - DSC , DTCVSW2 - DSC > DTCVSW1 - DSC , OPERSYMP - DSC , DISKACNT - DSC , EREP - DSC > TCPMAINT - DSC , BEADEV01 -L0003 > > VSM - TCPIP > > This tells you what is logged in on your system. Of these users, most can > be accounted for as standard z/VM service machines. The two that are not, > are BEADEV01 and LINUXFTP (although this could be TCPIP's ftpserve under a > different name; You'd have to log into it to see if it really is running > Linux.) > > From the others, I'd say you have a vSwitch active (because DTCVSW1 and 2 > are the controllers for a vSwitch) and you have the IBM Performance Toolkit > (the service machine PERFSVM). I'm not sure why TCPMAINT would be logged in > disconnected. This isn't needed for anything. OPERSYMP, DISKACNT and EREP > are collectors for various information produced by z/VM. I'm surprised to > not see OPERATOR logged in on a terminal. > > The user you need to log into (due to the fact that it has the "keys to > the cabinet") is MAINT. MAINT is the equivalent to Linux's root account. > Since I don't see DIRMAINT running on your system, I'd assume that the > current CP Directory is on one of MAINT's minidisks, probably named USER > DIRECT. You need to be able to log into MAINT to perform even minor > maintenance tasks on the system. Hopefully someone has left you the > password. > > The reason that you immediately see a Linux logon when you log into the > system is that you're logging into a user that is running a Linux guest. You > need your own, personal userid, so that you can easily log in and issue > commands. Once you find the CP Directory, it should be a simple task to add > one for yourself. > > Key to stepping into all this mud would be to look at the CP > Administration and Customization manual. It describes the contents of the CP > Directory file and how to put it into production, and also describes the > SYSTEM CONFIG file, found on MAINT's CF1, 2, and 3 minidisks. > > Do lots of querys and look at the files that MAINT and TCPMAINT control. > Don't change anything until you understand what those changes will affect. > > Good luck, and good hunting. > > -- >.~.Robert P. Nix Mayo Foundation > /V\RO-OE-5-55 200 First Street SW > / ( ) \ 507-284-0844 Rochester, MN 55905 > ^^-^^ - > "In theory, theory and practice are the same, but "Join the story... > Ride Ural." > in practice, theory and practice are different." > > > > > On 10/22/07 12:53 AM, "GnanaShekar Subramani" <[EMAIL PROTECTED]> > wrote: > > Hi, > > Since my mail attachments have not reached you, I am pasting the details > below: > > LOGON BEADEV01 > z/VM Version 5 Release 2.0, Service Level 0602 (64-bit), > built on IBM Virtualization Technology > There is no logmsg data > FILES:NO RDR, NO PRT, NO PUN > RECONNECTED AT 14:42:43 PDT SUNDAY 10/21/07 > > Welcome to SUSE Linux Enterprise Server 10 (s390x) - Kernel > 2.6.16.21-0.8-defaul > t (ttyS0). > > > beadev01 login: > > > > , > > ,RUNNING BEADEV1 ,, > > > [EMAIL PROTECTED]:~> pwd > pwd > /home/beadev01 > > [EMAIL PROTECTED]:~> uname -a > uname -a > Linux beadev01 2.6.16.21-0.8-default #1 SMP Mon Jul 3 18:25:39 UTC 2006 > s390x s3 > 90x s390x GNU/Linux > > [EMAIL PROTECTED]:~> more /etc/SuSE-release > more /etc/SuSE-release > SUSE Linux Enterprise Server 10 (s390x) > VERSION = 10 > > [EMAIL PROTECTED]:~> free > free > totalused free sharedbuffers cached > Mem:505192 239696 265496 0 73676 122404 > -/+ buffers/cache: 43616 461576 > Swap: 348688 0 348688 > [EMAIL PROTECTED]:~> > > > , > > ,RUNNING BEADEV1 ,, > > > > more /proc/cpuinfo > more /proc/cpuinfo > vendor_id : IBM/S390 > # processors: 1 > bogomips per cpu: 2398.61 > processor 0: version = FF, identification = 01D48C, machine = 2084 > [EMAIL PROTECTED]:~> > >
Re: Command to list details about the exisitng partitions / guest on zVM
FYI LOGON LINUXFTP z/VM Version 5 Release 2.0, Service Level 0602 (64-bit), built on IBM Virtualization Technology There is no logmsg data FILES: NO RDR, NO PRT, NO PUN RECONNECTED AT 17:02:49 PDT MONDAY 10/22/07 CMS IND USER LINUXFTP USERID=LINUXFTP MACH=ESA STOR=512M VIRT=V XSTORE=NONE IPLSYS=CMS DEVNUM=00016 PAGES: RES=0952 WS=0931 LOCKEDREAL= RESVD= NPREF= PREF= READS=0018 WRITES=0008 XSTORE=00 READS=00 WRITES=00 MIGRATES=00 CPU 00: CTIME=69:17 VTIME=000:00 TTIME=000:00 IO=000599 RDR=00 PRT=00 PCH=00 , ,RUNNING BEADEV1 ,, Thanks & Regards, -GnanaShekar- On 10/23/07, GnanaShekar Subramani <[EMAIL PROTECTED]> wrote: > > Hi, > > Thanks a lot for the detailed explanation. > > You were right, LINUXFTP was running linux. But I was unable to connect > to it using "putty-ssh or telnet" session. I was only able to "ftp" from > the dos prompt. > > Now, when I login as LINUXFTP; all it display is CMS. I guess I did > something like a LOGOFF without being aware of the consequence. > > Thanks & Regards, > -GnanaShekar- > > On 10/22/07, RPN01 <[EMAIL PROTECTED]> wrote: > > > > Thanks for the console log; The most interesting command you've shown > > here is: > > > > QUERY NAMES > > > > LINUXFTP - DSC , PERFSVM - DSC , TCPIP - DSC , DTCVSW2 - DSC > > DTCVSW1 - DSC , OPERSYMP - DSC , DISKACNT - DSC , EREP - DSC > > TCPMAINT - DSC , BEADEV01 -L0003 > > > > VSM - TCPIP > > > > This tells you what is logged in on your system. Of these users, most > > can be accounted for as standard z/VM service machines. The two that are > > not, are BEADEV01 and LINUXFTP (although this could be TCPIP's ftpserve > > under a different name; You'd have to log into it to see if it really is > > running Linux.) > > > > From the others, I'd say you have a vSwitch active (because DTCVSW1 and > > 2 are the controllers for a vSwitch) and you have the IBM Performance > > Toolkit (the service machine PERFSVM). I'm not sure why TCPMAINT would be > > logged in disconnected. This isn't needed for anything. OPERSYMP, DISKACNT > > and EREP are collectors for various information produced by z/VM. I'm > > surprised to not see OPERATOR logged in on a terminal. > > > > The user you need to log into (due to the fact that it has the "keys to > > the cabinet") is MAINT. MAINT is the equivalent to Linux's root account. > > Since I don't see DIRMAINT running on your system, I'd assume that the > > current CP Directory is on one of MAINT's minidisks, probably named USER > > DIRECT. You need to be able to log into MAINT to perform even minor > > maintenance tasks on the system. Hopefully someone has left you the > > password. > > > > The reason that you immediately see a Linux logon when you log into the > > system is that you're logging into a user that is running a Linux guest. You > > need your own, personal userid, so that you can easily log in and issue > > commands. Once you find the CP Directory, it should be a simple task to add > > one for yourself. > > > > Key to stepping into all this mud would be to look at the CP > > Administration and Customization manual. It describes the contents of the CP > > Directory file and how to put it into production, and also describes the > > SYSTEM CONFIG file, found on MAINT's CF1, 2, and 3 minidisks. > > > > Do lots of querys and look at the files that MAINT and TCPMAINT control. > > Don't change anything until you understand what those changes will affect. > > > > Good luck, and good hunting. > > > > -- > >.~.Robert P. Nix Mayo Foundation > > /V\RO-OE-5-55 200 First Street SW > > / ( ) \ 507-284-0844 Rochester, MN 55905 > > ^^-^^ - > > "In theory, theory and practice are the same, but "Join the > > story... Ride Ural." > > in practice, theory and practice are different." > > > > > > > > > > On 10/22/07 12:53 AM, "GnanaShekar Subramani" < [EMAIL PROTECTED]> > > wrote: > > > > Hi, > > > > Since my mail attachments have not reached you, I am pasting the details > > below: > > > > LOGON BEADEV01 > > z/VM Version 5 Release 2.0, Service Level 0602 (64-bit), > > built on IBM Virtualization Technology > > There is no logmsg data > > FILES:NO RDR, NO PRT, NO PUN > > RECONNECTED AT 14:42:43 PDT SUNDAY 10/21/07 > > > > Welcome to SUSE Linux Enterprise Server 10 (s390x) - Kernel > > 2.6.16.21-0.8-defaul > > t (ttyS0). > > > > > > beadev01 login: > > > > > > > >, > > > > ,RUNNING BEADEV1 ,, > > > > > > [EMAIL PROTECTED]:~> pwd > > pwd > > /home/beadev01 > > > > [EMAIL PROTECTED]:~> uname -a > > uname -a > > Linux beadev01 2.6.16.21-0.8-default
Re: Command to list details about the exisitng partitions / guest on zVM
Thanks for the console log; The most interesting command you¹ve shown here is: QUERY NAMES > LINUXFTP - DSC , PERFSVM - DSC , TCPIP - DSC , DTCVSW2 - DSC > DTCVSW1 - DSC , OPERSYMP - DSC , DISKACNT - DSC , EREP - DSC > TCPMAINT - DSC , BEADEV01 -L0003 VSM - TCPIP This tells you what is logged in on your system. Of these users, most can be accounted for as standard z/VM service machines. The two that are not, are BEADEV01 and LINUXFTP (although this could be TCPIP¹s ftpserve under a different name; You¹d have to log into it to see if it really is running Linux.) >From the others, I¹d say you have a vSwitch active (because DTCVSW1 and 2 are the controllers for a vSwitch) and you have the IBM Performance Toolkit (the service machine PERFSVM). I¹m not sure why TCPMAINT would be logged in disconnected. This isn¹t needed for anything. OPERSYMP, DISKACNT and EREP are collectors for various information produced by z/VM. I¹m surprised to not see OPERATOR logged in on a terminal. The user you need to log into (due to the fact that it has the ³keys to the cabinet²) is MAINT. MAINT is the equivalent to Linux¹s root account. Since I don¹t see DIRMAINT running on your system, I¹d assume that the current CP Directory is on one of MAINT¹s minidisks, probably named USER DIRECT. You need to be able to log into MAINT to perform even minor maintenance tasks on the system. Hopefully someone has left you the password. The reason that you immediately see a Linux logon when you log into the system is that you¹re logging into a user that is running a Linux guest. You need your own, personal userid, so that you can easily log in and issue commands. Once you find the CP Directory, it should be a simple task to add one for yourself. Key to stepping into all this mud would be to look at the CP Administration and Customization manual. It describes the contents of the CP Directory file and how to put it into production, and also describes the SYSTEM CONFIG file, found on MAINT¹s CF1, 2, and 3 minidisks. Do lots of querys and look at the files that MAINT and TCPMAINT control. Don¹t change anything until you understand what those changes will affect. Good luck, and good hunting. -- .~.Robert P. Nix Mayo Foundation /V\RO-OE-5-55 200 First Street SW / ( ) \ 507-284-0844 Rochester, MN 55905 ^^-^^ - "In theory, theory and practice are the same, but ³Join the story... Ride Ural.² in practice, theory and practice are different." On 10/22/07 12:53 AM, "GnanaShekar Subramani" <[EMAIL PROTECTED]> wrote: > Hi, > > Since my mail attachments have not reached you, I am pasting the details > below: > > LOGON BEADEV01 > z/VM Version 5 Release 2.0, Service Level 0602 (64-bit), > built on IBM Virtualization Technology > There is no logmsg data > FILES:NO RDR, NO PRT, NO PUN > RECONNECTED AT 14:42:43 PDT SUNDAY 10/21/07 > > Welcome to SUSE Linux Enterprise Server 10 (s390x) - Kernel > 2.6.16.21-0.8-defaul > t (ttyS0). > > > beadev01 login: > > > , > > ,RUNNING BEADEV1 ,, > -- > -- > [EMAIL PROTECTED]:~> pwd > pwd > /home/beadev01 > > [EMAIL PROTECTED]:~> uname -a > uname -a > Linux beadev01 2.6.16.21-0.8-default #1 SMP Mon Jul 3 18:25:39 UTC 2006 s390x > s3 > 90x s390x GNU/Linux > > [EMAIL PROTECTED]:~> more /etc/SuSE-release > more /etc/SuSE-release > SUSE Linux Enterprise Server 10 (s390x) > VERSION = 10 > > [EMAIL PROTECTED]:~> free > free > totalused free sharedbuffers cached > Mem:505192 239696 265496 0 73676 122404 > -/+ buffers/cache: 43616 461576 > Swap: 348688 0 348688 > [EMAIL PROTECTED]:~> > > , > > ,RUNNING BEADEV1 ,, > -- > -- > > more /proc/cpuinfo > more /proc/cpuinfo > vendor_id : IBM/S390 > # processors: 1 > bogomips per cpu: 2398.61 > processor 0: version = FF, identification = 01D48C, machine = 2084 > [EMAIL PROTECTED]:~> > > , > >,RUNNING BEADEV1 ,, > -- > -- > LOGON BEADEV01 > z/VM Version 5 Release 2.0, Service Level 0602 (64-bit), > built on IBM Virtualization Technology > There is no logmsg data > FILES:NO RDR, NO PRT, NO PUN > RECONNECTED AT 15:47:47 PDT SUNDAY 10/21/07 > > QUERY NAMES > LINUXFTP - DSC , PERFSVM - DSC , TCPIP - DSC , DTCVSW2 - DSC > DTCVSW1 - DSC , OPERSYMP - DSC , DISKACNT - DSC , EREP - DSC > TCPMAINT - DSC , BEADEV01 -L0003 > VSM - TCPIP
Re: Command to list details about the exisitng partitions / guest on zVM
You¹ll find that most z/VM¹ers will use userid, guest, image, and virtual machine interchangeably. Sometimes in the same paragraph, and possibly in the same sentence. Sorry; they¹re all just part of the history of the beast. But yes, if you log off the user, you¹ve ³powered off² the virtual machine. The ³magic number² on the IPL command that you refer to as is really the virtual CCUU of the disk device you¹re IPLing from. CCUU being the channel and unit number. This number should lead you to a device in the virtual machine¹s definition, which may be an MDISK or a DEDICATE, and will then lead you to a real device on your system. The virtual machines that are defined but not active will only be accurately listed in the CP Directory. Look through it, and try to eliminate any of the users that are created by the z/VM installation. What is left will be your CMS users and your Linux guests. You¹ll have to look at the minidisks of each individually to decide what they really are. -- .~.Robert P. Nix Mayo Foundation /V\RO-OE-5-55200 First Street SW /( )\ 507-284-0844 Rochester, MN 55905 ^^-^^ - "In theory, theory and practice are the same, but in practice, theory and practice are different." On 10/20/07 5:26 AM, "GnanaShekar Subramani" <[EMAIL PROTECTED]> wrote: > I guess the VM user and Virtual machine / guest os are one and the same. > > I was also able to bring up the virtual machine / guest os using the IPL > commands. I did this because I knew the IPLSYS for the Virtual machine from > one of my earlier screenshot and was able to IPL with "IPL > CLEAR" command. > > However I still need to find out details about the virtual machines that are > defined but not active. and IPL them. >
Re: Command to list details about the exisitng partitions / guest on zVM
Hi, Since my mail attachments have not reached you, I am pasting the details below: ,z/VM ONLINE , / VV VVV MM MM / VVVVV MMM MMM ZZ / VV VVV ZZ /VVVVVMM MM MM MM ZZ / VV VVV MM MMM MM ZZ / V MM M MM ZZ / VVV MM MM ZZ /VMM MM built on IBM Virtualization Technology ,Fill in your USERID and PASSWORD and press ENTER, ,(Your password will not appear when you type it), ,USERID ===>,,, ,PASSWORD ===>,,, ,COMMAND ===>,, ,RUNNING BEADEV1 LOGON BEADEV01 z/VM Version 5 Release 2.0, Service Level 0602 (64-bit), built on IBM Virtualization Technology There is no logmsg data FILES: NO RDR, NO PRT, NO PUN RECONNECTED AT 14:42:43 PDT SUNDAY 10/21/07 Welcome to SUSE Linux Enterprise Server 10 (s390x) - Kernel 2.6.16.21-0.8-defaul t (ttyS0). beadev01 login: , ,RUNNING BEADEV1 ,, [EMAIL PROTECTED]:~> pwd pwd /home/beadev01 [EMAIL PROTECTED]:~> uname -a uname -a Linux beadev01 2.6.16.21-0.8-default #1 SMP Mon Jul 3 18:25:39 UTC 2006 s390x s3 90x s390x GNU/Linux [EMAIL PROTECTED]:~> more /etc/SuSE-release more /etc/SuSE-release SUSE Linux Enterprise Server 10 (s390x) VERSION = 10 [EMAIL PROTECTED]:~> free free total used free sharedbuffers cached Mem:505192 239696 265496 0 73676 122404 -/+ buffers/cache: 43616 461576 Swap: 348688 0 348688 [EMAIL PROTECTED]:~> , ,RUNNING BEADEV1 ,, more /proc/cpuinfo more /proc/cpuinfo vendor_id : IBM/S390 # processors: 1 bogomips per cpu: 2398.61 processor 0: version = FF, identification = 01D48C, machine = 2084 [EMAIL PROTECTED]:~> , ,RUNNING BEADEV1 ,, LOGON BEADEV01 z/VM Version 5 Release 2.0, Service Level 0602 (64-bit), built on IBM Virtualization Technology There is no logmsg data FILES: NO RDR, NO PRT, NO PUN RECONNECTED AT 15:47:47 PDT SUNDAY 10/21/07 QUERY NAMES LINUXFTP - DSC , PERFSVM - DSC , TCPIP- DSC , DTCVSW2 - DSC DTCVSW1 - DSC , OPERSYMP - DSC , DISKACNT - DSC , EREP - DSC TCPMAINT - DSC , BEADEV01 -L0003 VSM - TCPIP IND USER BEADEV01 USERID=BEADEV01 MACH=ESA STOR=512M VIRT=V XSTORE=NONE IPLSYS=DEV 0700 DEVNUM=00017 PAGES: RES=00073223 WS=00073210 LOCKEDREAL=0013 RESVD= NPREF=0001 PREF= READS=0001 WRITES=0001 XSTORE=00 READS=00 WRITES=00 MIGRATES=00 CPU 00: CTIME=42:24 VTIME=002:42 TTIME=003:30 IO=071474 RDR=00 PRT=00 PCH=00 , ,RUNNING BEADEV1 ,, --- Thanks & Regards, -GnanaShekar- On 10/20/07, Kris Buelens <[EMAIL PROTECTED]> wrote: > > VM user and Virtual machine / guest os are indeed one and the same > > LOGOFF, that's like pulling the plug out, not an orderly shutdown. So > better stop your Linuxes with the appropriate Linux command and then enter > LOGOFF. > > At the other hand: modern Linuxes register themselves to receive shutdown > signals from CP, what means that if the LPAR gets stopped, of when you issue > CP SHUTDOWN, or when one uses FORCE, these Linuxes will shutdown themselves > and CP gives them some to do that. This time can be defined in SYSTEM > CONFIG (on MAINT CF1) or by a CP SET command; by default, the time is 0 and > FORCE or SHUTDOWN won't give Linuxes any time to stop. > To find out the details, use QUERY SIGNALS or QUERY SIGNAL SHUTDOWN (or > something like it, my memory isn't that good anymore to remember all details > of relatively new commands). HELP CPQUERY MENU is a start to find the > details online. > > -- > Kris Buelens, > IBM Belgium, VM customer support > > 2007/10/20, GnanaShekar Subramani <[EMAIL PROTECTED]>: > > > > Hi, > > > > Thanks a lot for your help. > > I am now able to enter the CP commands. > > > > After logging in as a VM user if I log
Re: Command to list details about the exisitng partitions / guest on zVM
VM user and Virtual machine / guest os are indeed one and the same LOGOFF, that's like pulling the plug out, not an orderly shutdown. So better stop your Linuxes with the appropriate Linux command and then enter LOGOFF. At the other hand: modern Linuxes register themselves to receive shutdown signals from CP, what means that if the LPAR gets stopped, of when you issue CP SHUTDOWN, or when one uses FORCE, these Linuxes will shutdown themselves and CP gives them some to do that. This time can be defined in SYSTEM CONFIG (on MAINT CF1) or by a CP SET command; by default, the time is 0 and FORCE or SHUTDOWN won't give Linuxes any time to stop. To find out the details, use QUERY SIGNALS or QUERY SIGNAL SHUTDOWN (or something like it, my memory isn't that good anymore to remember all details of relatively new commands). HELP CPQUERY MENU is a start to find the details online. -- Kris Buelens, IBM Belgium, VM customer support 2007/10/20, GnanaShekar Subramani <[EMAIL PROTECTED]>: > > Hi, > > Thanks a lot for your help. > I am now able to enter the CP commands. > > After logging in as a VM user if I log off (LOGOFF command), I guess the > virtual machine / guest os is getting shutdown. > > I guess the VM user and Virtual machine / guest os are one and the same. > > I was also able to bring up the virtual machine / guest os using the IPL > commands. I did this because I knew the IPLSYS for the Virtual machine from > one of my earlier screenshot and was able to IPL with "IPL > CLEAR" command. > > However I still need to find out details about the virtual machines that > are defined but not active. and IPL them. > > Please suggest.Also find the attachment. In the mean while I am going > through the zVMBasics pdf. > > Thanks & Regards, > -GnanaShekar- > > > > On 10/20/07, Kris Buelens <[EMAIL PROTECTED]> wrote: > > > > I don't see an attached file... > > To enter CP commands when Linux is active you have several choices > > - hit the PA1 key, it will place you in CP READ and then you enter a CP > > command > > - issue #CP > > - when logged on to a Linux user (like root) you can try HCP or > > VMCP > > - or use the SCIF, the Single Image Console Facility: from a VM user > > with enough CP classes > > -- SET SECUSER LINUXxyz * > > -- SET SEND CP LINUXxyz x > > The first command defines you as secondary user of LINUXxyz which > > means that all console output of LINUXxyz will be routed to you if LINUXxyz > > is disconnected, the SEND command sends a CP command to LINUXxyz > > > > Note that the # character and PA1 can have been redefined with the CP > > TERMinal command, issue Q TERM and look for LINEND and BREAKIN > > > > 2007/10/20, GnanaShekar Subramani < [EMAIL PROTECTED]>: > > > > > > Hi, > > > > > > After logging through the 3270 terminal emulator, I am being asked to > > > login to the linux guest. > > > > > > So there is no provison to enter CP commands. > > > Find the attached file for more details. > > > > > > Please suggest. > > > Thanks & Regards, > > > -GnanaShekar- > > > > > > > > > On 10/18/07, RPN01 <[EMAIL PROTECTED]> wrote: > > > > > > > > Another starting point, if the guests are connected via vSwitch, > > > > would be to > > > > "query vswitch" to get the name of the virtual switch. This will > > > > also tell > > > > you how many guests are attached to the virtual switch. Then "query > > > > vswitch > > > > active" to list the individual guests attached to the > > > > virtual > > > > switch. > > > > > > > > Older methods might be reflected in the TCPIP definitions, which > > > > should be > > > > on TCPMAINT's minidisk 198. > > > > > > > > -- > > > > .~.Robert P. Nix Mayo Foundation > > > > /V\RO-OE-5-55200 First Street SW > > > > /( )\ 507-284-0844 Rochester, MN 55905 > > > > ^^-^^ - > > > >"In theory, theory and practice are the same, but > > > > in practice, theory and practice are different." > > > > > > > > > > > > > > > > > > > > On 10/18/07 8:02 AM, "Dave Jones" < [EMAIL PROTECTED]> wrote: > > > > > > > > > Hello, GnanaShekar. > > > > > > > > > > Welcome to the wonderful world of z/VM and zLinux; I think you > > > > will find > > > > > it a very friendly and easy to use environment. > > > > > > > > > > To see how many guests (virtual machines) are running running, try > > > > this > > > > > command: > > > > > > > > > > CP Q Names > > > > > > > > > > This will show you a list of all of the virtual machines (guests) > > > > that > > > > > are currently running and whither or not they are connected to a > > > > console > > > > > (terminal) or not (DSC -- disconnected). Guests do not need to be > > > > > connected to a console for them to continue to run. > > > > > > > > > > A good place for someone new to z/VM to start is to take a look at > > > > this > > > > > IBM document: "Introduction to the New Mainframe: z/VM Basics". > > > > You can > > > > > download a free copy from her
Re: Command to list details about the exisitng partitions / guest on zVM
No attachments. Attachments are stripped off. resubmit as copy and paste. Suleiman Shahin Date: Sat, 20 Oct 2007 15:56:16 +0530 From: [EMAIL PROTECTED] Subject: Re: Command to list details about the exisitng partitions / guest on zVM To: IBMVM@LISTSERV.UARK.EDU Hi, Thanks a lot for your help. I am now able to enter the CP commands. After logging in as a VM user if I log off (LOGOFF command), I guess the virtual machine / guest os is getting shutdown. I guess the VM user and Virtual machine / guest os are one and the same. I was also able to bring up the virtual machine / guest os using the IPL commands. I did this because I knew the IPLSYS for the Virtual machine from one of my earlier screenshot and was able to IPL with "IPL CLEAR" command. However I still need to find out details about the virtual machines that are defined but not active. and IPL them. Please suggest.Also find the attachment. In the mean while I am going through the zVMBasics pdf. Thanks & Regards, -GnanaShekar- On 10/20/07, Kris Buelens <[EMAIL PROTECTED]> wrote: I don't see an attached file... To enter CP commands when Linux is active you have several choices - hit the PA1 key, it will place you in CP READ and then you enter a CP command - issue #CP - when logged on to a Linux user (like root) you can try HCP or VMCP - or use the SCIF, the Single Image Console Facility: from a VM user with enough CP classes -- SET SECUSER LINUXxyz * -- SET SEND CP LINUXxyz x The first command defines you as secondary user of LINUXxyz which means that all console output of LINUXxyz will be routed to you if LINUXxyz is disconnected, the SEND command sends a CP command to LINUXxyz Note that the # character and PA1 can have been redefined with the CP TERMinal command, issue Q TERM and look for LINEND and BREAKIN 2007/10/20, GnanaShekar Subramani < [EMAIL PROTECTED]>: Hi, After logging through the 3270 terminal emulator, I am being asked to login to the linux guest. So there is no provison to enter CP commands. Find the attached file for more details. Please suggest. Thanks & Regards, -GnanaShekar- On 10/18/07, RPN01 <[EMAIL PROTECTED]> wrote: Another starting point, if the guests are connected via vSwitch, would be to "query vswitch" to get the name of the virtual switch. This will also tell you how many guests are attached to the virtual switch. Then "query vswitch active" to list the individual guests attached to the virtual switch. Older methods might be reflected in the TCPIP definitions, which should be on TCPMAINT's minidisk 198. -- .~.Robert P. Nix Mayo Foundation /V\RO-OE-5-55200 First Street SW /( )\ 507-284-0844 Rochester, MN 55905 ^^-^^ - "In theory, theory and practice are the same, but in practice, theory and practice are different." On 10/18/07 8:02 AM, "Dave Jones" < [EMAIL PROTECTED]> wrote: > Hello, GnanaShekar. > > Welcome to the wonderful world of z/VM and zLinux; I think you will find > it a very friendly and easy to use environment. > > To see how many guests (virtual machines) are running running, try this > command: > > CP Q Names > > This will show you a list of all of the virtual machines (guests) that > are currently running and whither or not they are connected to a console > (terminal) or not (DSC -- disconnected). Guests do not need to be > connected to a console for them to continue to run. > > A good place for someone new to z/VM to start is to take a look at this > IBM document: "Introduction to the New Mainframe: z/VM Basics". You can > download a free copy from here: > http://www.redbooks.ibm.com/redpieces/abstracts/sg247316.html?Open > > Good luck and do not be afraid to ask any more questions that you might > have here on the list..we really do enjoy helping new comers get to > know z/VM! > > > Have a good one. > > GnanaShekar Subramani wrote: >> Hi, >> >> I am a newbie to IBM systemz / Mainframe / zVM / zLinux. However I am >> familiar to IBM system p, AIX and LPAR / virtualization in AIX. >> I have been given a username / password for zVM; and my client wants me to >> find out all the different partitions / guests that are existing. >> A long time ago somebody has setup linux guests on zVM and they have used >> zLinux in the project. >> >> We donot have a record of what was done earlier in relation to zVM / zLinux >> setup. >> >> I am clueless. So thought of taking help from this forum. >> >> This is what appears for my zVM login. >> >> >> z/VM >> ONLINE
Re: Command to list details about the exisitng partitions / guest on zVM
Hi, Thanks a lot for your help. I am now able to enter the CP commands. After logging in as a VM user if I log off (LOGOFF command), I guess the virtual machine / guest os is getting shutdown. I guess the VM user and Virtual machine / guest os are one and the same. I was also able to bring up the virtual machine / guest os using the IPL commands. I did this because I knew the IPLSYS for the Virtual machine from one of my earlier screenshot and was able to IPL with "IPL CLEAR" command. However I still need to find out details about the virtual machines that are defined but not active. and IPL them. Please suggest.Also find the attachment. In the mean while I am going through the zVMBasics pdf. Thanks & Regards, -GnanaShekar- On 10/20/07, Kris Buelens <[EMAIL PROTECTED]> wrote: > > I don't see an attached file... > To enter CP commands when Linux is active you have several choices > - hit the PA1 key, it will place you in CP READ and then you enter a CP > command > - issue #CP > - when logged on to a Linux user (like root) you can try HCP or VMCP > > - or use the SCIF, the Single Image Console Facility: from a VM user with > enough CP classes > -- SET SECUSER LINUXxyz * > -- SET SEND CP LINUXxyz x > The first command defines you as secondary user of LINUXxyz which means > that all console output of LINUXxyz will be routed to you if LINUXxyz is > disconnected, the SEND command sends a CP command to LINUXxyz > > Note that the # character and PA1 can have been redefined with the CP > TERMinal command, issue Q TERM and look for LINEND and BREAKIN > > 2007/10/20, GnanaShekar Subramani < [EMAIL PROTECTED]>: > > > > Hi, > > > > After logging through the 3270 terminal emulator, I am being asked to > > login to the linux guest. > > > > So there is no provison to enter CP commands. > > Find the attached file for more details. > > > > Please suggest. > > Thanks & Regards, > > -GnanaShekar- > > > > > > On 10/18/07, RPN01 <[EMAIL PROTECTED]> wrote: > > > > > > Another starting point, if the guests are connected via vSwitch, would > > > be to > > > "query vswitch" to get the name of the virtual switch. This will also > > > tell > > > you how many guests are attached to the virtual switch. Then "query > > > vswitch > > > active" to list the individual guests attached to the > > > virtual > > > switch. > > > > > > Older methods might be reflected in the TCPIP definitions, which > > > should be > > > on TCPMAINT's minidisk 198. > > > > > > -- > > > .~.Robert P. Nix Mayo Foundation > > > /V\RO-OE-5-55200 First Street SW > > > /( )\ 507-284-0844 Rochester, MN 55905 > > > ^^-^^ - > > >"In theory, theory and practice are the same, but > > > in practice, theory and practice are different." > > > > > > > > > > > > > > > On 10/18/07 8:02 AM, "Dave Jones" < [EMAIL PROTECTED]> wrote: > > > > > > > Hello, GnanaShekar. > > > > > > > > Welcome to the wonderful world of z/VM and zLinux; I think you will > > > find > > > > it a very friendly and easy to use environment. > > > > > > > > To see how many guests (virtual machines) are running running, try > > > this > > > > command: > > > > > > > > CP Q Names > > > > > > > > This will show you a list of all of the virtual machines (guests) > > > that > > > > are currently running and whither or not they are connected to a > > > console > > > > (terminal) or not (DSC -- disconnected). Guests do not need to be > > > > connected to a console for them to continue to run. > > > > > > > > A good place for someone new to z/VM to start is to take a look at > > > this > > > > IBM document: "Introduction to the New Mainframe: z/VM Basics". You > > > can > > > > download a free copy from here: > > > > http://www.redbooks.ibm.com/redpieces/abstracts/sg247316.html?Open > > > > > > > > Good luck and do not be afraid to ask any more questions that you > > > might > > > > have here on the list..we really do enjoy helping new comers get > > > to > > > > know z/VM! > > > > > > > > > > > > Have a good one. > > > > > > > > GnanaShekar Subramani wrote: > > > >> Hi, > > > >> > > > >> I am a newbie to IBM systemz / Mainframe / zVM / zLinux. However I > > > am > > > >> familiar to IBM system p, AIX and LPAR / virtualization in AIX. > > > >> I have been given a username / password for zVM; and my client > > > wants me to > > > >> find out all the different partitions / guests that are existing. > > > >> A long time ago somebody has setup linux guests on zVM and they > > > have used > > > >> zLinux in the project. > > > >> > > > >> We donot have a record of what was done earlier in relation to zVM > > > / zLinux > > > >> setup. > > > >> > > > >> I am clueless. So thought of taking help from this forum. > > > >> > > > >> This is what appears for my zVM login. > > > >> > > > >> > > > >> z/VM > > > >> ONLINE > > > >> > > > >> z/VM Version 5
Re: Command to list details about the exisitng partitions / guest on zVM
I don't see an attached file... To enter CP commands when Linux is active you have several choices - hit the PA1 key, it will place you in CP READ and then you enter a CP command - issue #CP - when logged on to a Linux user (like root) you can try HCP or VMCP - or use the SCIF, the Single Image Console Facility: from a VM user with enough CP classes -- SET SECUSER LINUXxyz * -- SET SEND CP LINUXxyz x The first command defines you as secondary user of LINUXxyz which means that all console output of LINUXxyz will be routed to you if LINUXxyz is disconnected, the SEND command sends a CP command to LINUXxyz Note that the # character and PA1 can have been redefined with the CP TERMinal command, issue Q TERM and look for LINEND and BREAKIN 2007/10/20, GnanaShekar Subramani <[EMAIL PROTECTED]>: > > Hi, > > After logging through the 3270 terminal emulator, I am being asked to > login to the linux guest. > > So there is no provison to enter CP commands. > Find the attached file for more details. > > Please suggest. > Thanks & Regards, > -GnanaShekar- > > > On 10/18/07, RPN01 <[EMAIL PROTECTED]> wrote: > > > > Another starting point, if the guests are connected via vSwitch, would > > be to > > "query vswitch" to get the name of the virtual switch. This will also > > tell > > you how many guests are attached to the virtual switch. Then "query > > vswitch > > active" to list the individual guests attached to the > > virtual > > switch. > > > > Older methods might be reflected in the TCPIP definitions, which should > > be > > on TCPMAINT's minidisk 198. > > > > -- > > .~.Robert P. Nix Mayo Foundation > > /V\RO-OE-5-55200 First Street SW > > /( )\ 507-284-0844 Rochester, MN 55905 > > ^^-^^ - > >"In theory, theory and practice are the same, but > > in practice, theory and practice are different." > > > > > > > > > > On 10/18/07 8:02 AM, "Dave Jones" < [EMAIL PROTECTED]> wrote: > > > > > Hello, GnanaShekar. > > > > > > Welcome to the wonderful world of z/VM and zLinux; I think you will > > find > > > it a very friendly and easy to use environment. > > > > > > To see how many guests (virtual machines) are running running, try > > this > > > command: > > > > > > CP Q Names > > > > > > This will show you a list of all of the virtual machines (guests) that > > > are currently running and whither or not they are connected to a > > console > > > (terminal) or not (DSC -- disconnected). Guests do not need to be > > > connected to a console for them to continue to run. > > > > > > A good place for someone new to z/VM to start is to take a look at > > this > > > IBM document: "Introduction to the New Mainframe: z/VM Basics". You > > can > > > download a free copy from here: > > > http://www.redbooks.ibm.com/redpieces/abstracts/sg247316.html?Open > > > > > > Good luck and do not be afraid to ask any more questions that you > > might > > > have here on the list..we really do enjoy helping new comers get > > to > > > know z/VM! > > > > > > > > > Have a good one. > > > > > > GnanaShekar Subramani wrote: > > >> Hi, > > >> > > >> I am a newbie to IBM systemz / Mainframe / zVM / zLinux. However I > > am > > >> familiar to IBM system p, AIX and LPAR / virtualization in AIX. > > >> I have been given a username / password for zVM; and my client wants > > me to > > >> find out all the different partitions / guests that are existing. > > >> A long time ago somebody has setup linux guests on zVM and they have > > used > > >> zLinux in the project. > > >> > > >> We donot have a record of what was done earlier in relation to zVM / > > zLinux > > >> setup. > > >> > > >> I am clueless. So thought of taking help from this forum. > > >> > > >> This is what appears for my zVM login. > > >> > > >> > > >> z/VM > > >> ONLINE > > >> > > >> z/VM Version 5 Release 2.0, Service Level 0602 (64-bit), > > >> built on IBM Virtualization Technology > > >> There is no logmsg data > > >> FILES: NO RDR, NO PRT, NO PUN > > >> RECONNECTED AT 21:19:58 PDT WEDNESDAY 10/17/07 > > >> -- > > >> > > >> I do not know even a single zVM command, so please suggest or point > > me in > > >> the right direction. > > >> > > >> > > >> Thanks & Regards, > > >> -GnanaShekar- > > >> > > > > -- Kris Buelens, IBM Belgium, VM customer support
Re: Command to list details about the exisitng partitions / guest on zVM
Hi, After logging through the 3270 terminal emulator, I am being asked to login to the linux guest. So there is no provison to enter CP commands. Find the attached file for more details. Please suggest. Thanks & Regards, -GnanaShekar- On 10/18/07, RPN01 <[EMAIL PROTECTED]> wrote: > > Another starting point, if the guests are connected via vSwitch, would be > to > "query vswitch" to get the name of the virtual switch. This will also tell > you how many guests are attached to the virtual switch. Then "query > vswitch > active" to list the individual guests attached to the virtual > switch. > > Older methods might be reflected in the TCPIP definitions, which should be > on TCPMAINT's minidisk 198. > > -- > .~.Robert P. Nix Mayo Foundation > /V\RO-OE-5-55200 First Street SW > /( )\ 507-284-0844 Rochester, MN 55905 > ^^-^^ - >"In theory, theory and practice are the same, but > in practice, theory and practice are different." > > > > > On 10/18/07 8:02 AM, "Dave Jones" <[EMAIL PROTECTED]> wrote: > > > Hello, GnanaShekar. > > > > Welcome to the wonderful world of z/VM and zLinux; I think you will find > > it a very friendly and easy to use environment. > > > > To see how many guests (virtual machines) are running running, try this > > command: > > > > CP Q Names > > > > This will show you a list of all of the virtual machines (guests) that > > are currently running and whither or not they are connected to a console > > (terminal) or not (DSC -- disconnected). Guests do not need to be > > connected to a console for them to continue to run. > > > > A good place for someone new to z/VM to start is to take a look at this > > IBM document: "Introduction to the New Mainframe: z/VM Basics". You can > > download a free copy from here: > > http://www.redbooks.ibm.com/redpieces/abstracts/sg247316.html?Open > > > > Good luck and do not be afraid to ask any more questions that you might > > have here on the list..we really do enjoy helping new comers get to > > know z/VM! > > > > > > Have a good one. > > > > GnanaShekar Subramani wrote: > >> Hi, > >> > >> I am a newbie to IBM systemz / Mainframe / zVM / zLinux. However I am > >> familiar to IBM system p, AIX and LPAR / virtualization in AIX. > >> I have been given a username / password for zVM; and my client wants me > to > >> find out all the different partitions / guests that are existing. > >> A long time ago somebody has setup linux guests on zVM and they have > used > >> zLinux in the project. > >> > >> We donot have a record of what was done earlier in relation to zVM / > zLinux > >> setup. > >> > >> I am clueless. So thought of taking help from this forum. > >> > >> This is what appears for my zVM login. > >> > >> > >> z/VM > >> ONLINE > >> > >> z/VM Version 5 Release 2.0, Service Level 0602 (64-bit), > >> built on IBM Virtualization Technology > >> There is no logmsg data > >> FILES: NO RDR, NO PRT, NO PUN > >> RECONNECTED AT 21:19:58 PDT WEDNESDAY 10/17/07 > >> -- > >> > >> I do not know even a single zVM command, so please suggest or point me > in > >> the right direction. > >> > >> > >> Thanks & Regards, > >> -GnanaShekar- > >> >
Re: Command to list details about the exisitng partitions / guest on zVM
Another starting point, if the guests are connected via vSwitch, would be to "query vswitch" to get the name of the virtual switch. This will also tell you how many guests are attached to the virtual switch. Then "query vswitch active" to list the individual guests attached to the virtual switch. Older methods might be reflected in the TCPIP definitions, which should be on TCPMAINT's minidisk 198. -- .~.Robert P. Nix Mayo Foundation /V\RO-OE-5-55200 First Street SW /( )\ 507-284-0844 Rochester, MN 55905 ^^-^^ - "In theory, theory and practice are the same, but in practice, theory and practice are different." On 10/18/07 8:02 AM, "Dave Jones" <[EMAIL PROTECTED]> wrote: > Hello, GnanaShekar. > > Welcome to the wonderful world of z/VM and zLinux; I think you will find > it a very friendly and easy to use environment. > > To see how many guests (virtual machines) are running running, try this > command: > > CP Q Names > > This will show you a list of all of the virtual machines (guests) that > are currently running and whither or not they are connected to a console > (terminal) or not (DSC -- disconnected). Guests do not need to be > connected to a console for them to continue to run. > > A good place for someone new to z/VM to start is to take a look at this > IBM document: "Introduction to the New Mainframe: z/VM Basics". You can > download a free copy from here: > http://www.redbooks.ibm.com/redpieces/abstracts/sg247316.html?Open > > Good luck and do not be afraid to ask any more questions that you might > have here on the list..we really do enjoy helping new comers get to > know z/VM! > > > Have a good one. > > GnanaShekar Subramani wrote: >> Hi, >> >> I am a newbie to IBM systemz / Mainframe / zVM / zLinux. However I am >> familiar to IBM system p, AIX and LPAR / virtualization in AIX. >> I have been given a username / password for zVM; and my client wants me to >> find out all the different partitions / guests that are existing. >> A long time ago somebody has setup linux guests on zVM and they have used >> zLinux in the project. >> >> We donot have a record of what was done earlier in relation to zVM / zLinux >> setup. >> >> I am clueless. So thought of taking help from this forum. >> >> This is what appears for my zVM login. >> >> >> z/VM >> ONLINE >> >> z/VM Version 5 Release 2.0, Service Level 0602 (64-bit), >> built on IBM Virtualization Technology >> There is no logmsg data >> FILES: NO RDR, NO PRT, NO PUN >> RECONNECTED AT 21:19:58 PDT WEDNESDAY 10/17/07 >> -- >> >> I do not know even a single zVM command, so please suggest or point me in >> the right direction. >> >> >> Thanks & Regards, >> -GnanaShekar- >>
Re: Command to list details about the exisitng partitions / guest on zVM
Hello, GnanaShekar. Welcome to the wonderful world of z/VM and zLinux; I think you will find it a very friendly and easy to use environment. To see how many guests (virtual machines) are running running, try this command: CP Q Names This will show you a list of all of the virtual machines (guests) that are currently running and whither or not they are connected to a console (terminal) or not (DSC -- disconnected). Guests do not need to be connected to a console for them to continue to run. A good place for someone new to z/VM to start is to take a look at this IBM document: "Introduction to the New Mainframe: z/VM Basics". You can download a free copy from here: http://www.redbooks.ibm.com/redpieces/abstracts/sg247316.html?Open Good luck and do not be afraid to ask any more questions that you might have here on the list..we really do enjoy helping new comers get to know z/VM! Have a good one. GnanaShekar Subramani wrote: Hi, I am a newbie to IBM systemz / Mainframe / zVM / zLinux. However I am familiar to IBM system p, AIX and LPAR / virtualization in AIX. I have been given a username / password for zVM; and my client wants me to find out all the different partitions / guests that are existing. A long time ago somebody has setup linux guests on zVM and they have used zLinux in the project. We donot have a record of what was done earlier in relation to zVM / zLinux setup. I am clueless. So thought of taking help from this forum. This is what appears for my zVM login. z/VM ONLINE z/VM Version 5 Release 2.0, Service Level 0602 (64-bit), built on IBM Virtualization Technology There is no logmsg data FILES: NO RDR, NO PRT, NO PUN RECONNECTED AT 21:19:58 PDT WEDNESDAY 10/17/07 -- I do not know even a single zVM command, so please suggest or point me in the right direction. Thanks & Regards, -GnanaShekar- -- DJ V/Soft
Re: Command to list details about the exisitng partitions / guest on zVM
As an appetizer: (command case is not important, I show minimum abbreviation in Uppercase) CP Query Names lists all virtual machines that are active at this time CP IND USER x displays some detailsabout a virtual machine x To find virtual machines that are defined and maybe not active (logged on) you need to find the CP directory, that is a flat file that is manually maintained by an editor, or it is maintained by a product like DIRMAINT or VM:Secure. If QUERY NAMES includes DIRMAINT or VMSECURE chances are great that the CP directory is not manually maintained. 2007/10/18, GnanaShekar Subramani <[EMAIL PROTECTED]>: > > Hi, > > I am a newbie to IBM systemz / Mainframe / zVM / zLinux. However I am > familiar to IBM system p, AIX and LPAR / virtualization in AIX. > I have been given a username / password for zVM; and my client wants me to > find out all the different partitions / guests that are existing. > A long time ago somebody has setup linux guests on zVM and they have used > zLinux in the project. > > We donot have a record of what was done earlier in relation to zVM / > zLinux setup. > > I am clueless. So thought of taking help from this forum. > > This is what appears for my zVM login. > > > z/VM > ONLINE > > z/VM Version 5 Release 2.0, Service Level 0602 (64-bit), > built on IBM Virtualization Technology > There is no logmsg data > FILES: NO RDR, NO PRT, NO PUN > RECONNECTED AT 21:19:58 PDT WEDNESDAY 10/17/07 > -- > > I do not know even a single zVM command, so please suggest or point me in > the right direction. > > > Thanks & Regards, > -GnanaShekar- > -- Kris Buelens, IBM Belgium, VM customer support
Command to list details about the exisitng partitions / guest on zVM
Hi, I am a newbie to IBM systemz / Mainframe / zVM / zLinux. However I am familiar to IBM system p, AIX and LPAR / virtualization in AIX. I have been given a username / password for zVM; and my client wants me to find out all the different partitions / guests that are existing. A long time ago somebody has setup linux guests on zVM and they have used zLinux in the project. We donot have a record of what was done earlier in relation to zVM / zLinux setup. I am clueless. So thought of taking help from this forum. This is what appears for my zVM login. z/VM ONLINE z/VM Version 5 Release 2.0, Service Level 0602 (64-bit), built on IBM Virtualization Technology There is no logmsg data FILES: NO RDR, NO PRT, NO PUN RECONNECTED AT 21:19:58 PDT WEDNESDAY 10/17/07 -- I do not know even a single zVM command, so please suggest or point me in the right direction. Thanks & Regards, -GnanaShekar-