Re: [ilugd] connecting to two servers thr single IP Address
dhanraj sheth [EMAIL PROTECTED] wrote: dear M.B, what is the OS in the PC having IP of 197.172.100.1 and clear my dout that what is the purpose of that pc just internet sharer for the client and then what is the the use of Sco server ? why Dont u use the Linux OS to share internet with your clients and there u can also troble-shoot your problem too . thanks Dhanraj sheth Everything was made clear in my mail under reference. However, the IP of PC 197.172.100.2 is containing OS as Win98. I have purchased SCO in original and at that time I did not here about linux OS. So now I can not switch over to freely available software like linux. After spending Rs.3.5 lacs on SCO how can I switchover to a freely available software. I just need a solution for my problem and not advise. regards, malkiat MALKIAT S. BENIPAL - Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software ___ ilugd mailing list [EMAIL PROTECTED] http://frodo.hserus.net/mailman/listinfo/ilugd
[ilugd] connecting to two servers thr single IP Address
Dear all, I have two servers with me. One is running Unix SCO 5.5 server and another one is a PC based, meant for providing internet connection sharing through dialup using samber server to differnt PCs for net surfing and mail distribution purpose. The IP address of SCO server is 100.0.0.1 and the IP address of PC server is 191.172.100.2. Now, I have a client PC and I am connected to both these servers thr lan card. By default I am connected to PC server for net surfing purpose. Now, if I wish to connect to Unix SCO Server then in network neighbourhod (win.98) of client PC, I have to change the address of my IP as 100.0.0.12 and reboot my PC. Now, I am able to connect to my SCO server. Again, if I wish to connect that PC server I have to change my IP address to that of PC one ie. 191.172.100.12. Is there any other way through which I am relieved of the task of changing the IP addresses of my client PC and restarting it again and again for switching over between these two servers. For your information, I am using telnet (win98) to connect to Unix SCO server. pl. guide. best regards, malkiat MALKIAT S. BENIPAL - Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software ___ ilugd mailing list [EMAIL PROTECTED] http://frodo.hserus.net/mailman/listinfo/ilugd
Re: [ilugd] connecting to two servers thr single IP Address
Sorry, it was not I, one of my fellow asked me for a solution for this and I gave him the address of ILUGD. He further asked me that to put the question, he will have to make the user .. and it will take time so insisted me to give him my user name and password to put his question. I apologise if it hurts you. Hope you wud understand. best regards, malkiat Raj Mathur [EMAIL PROTECTED] wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Malkiat == MALKIAT BENIPAL writes: Malkiat [snip] Malkiat Everything was made clear in my mail under Malkiat reference. However, the IP of PC 197.172.100.2 is Malkiat containing OS as Win98. I have purchased SCO in original Malkiat and at that time I did not here about linux OS. So now I Malkiat can not switch over to freely available software like Malkiat linux. After spending Rs.3.5 lacs on SCO how can I Malkiat switchover to a freely available software. Malkiat I just need a solution for my problem and not advise. So you're saying that... 1. You prefer to use proprietary software, even if it doesn't work for you. 2. You pay large amounts of money to proprietary software vendors and then you approach a list that deals in free software for help instead of contacting the proprietary software vendors you bought your software from and asking them to solve your problems. 3. Your criterion for using software is how much you paid for it rather than the usefulness of the software for you. 4. It's fine if you approach a Linux list for help even though you're asking for help with the software from the 2 companies that have the most interest in seeing Linux destroyed (SCO and MS). Here's the help you wanted: to answer your (rhetorical) question, you can switch over to Linux after paying Rs 3.5 lakhs very easily: come and take Debian CDs from me, put CD 1 in the drive of the SCO system, boot with it and answer the questions it prompts you with. See? it's that easy! - -- Raju - -- Raj Mathur [EMAIL PROTECTED] http://kandalaya.org/ GPG: 78D4 FC67 367F 40E2 0DD5 0FEF C968 D0EF CC68 D17F It is the mind that moves -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) Comment: Processed by Mailcrypt 3.5.6 and Gnu Privacy Guard iD8DBQE/OM4LyWjQ78xo0X8RAiGmAJsETBhaRiBWDEdDvMivgfbei8cm0QCfZT90 dJ747QAD9RHLADFL8cDX50g= =Xwpe -END PGP SIGNATURE- ___ ilugd mailing list [EMAIL PROTECTED] http://frodo.hserus.net/mailman/listinfo/ilugd MALKIAT S. BENIPAL - Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software ___ ilugd mailing list [EMAIL PROTECTED] http://frodo.hserus.net/mailman/listinfo/ilugd
Re: [ilugd] connecting to two servers thr single IP Address
I guess this list is now obliged to give some kind of support for SCO. ;) N --- MALKIAT BENIPAL [EMAIL PROTECTED] wrote: I have purchased SCO in original and at that time I did not here about linux OS. So now I can not switch over to freely available software like linux. After spending Rs.3.5 lacs on SCO how can I switchover to a freely available software. I just need a solution for my problem and not advise. regards, malkiat = -- Naresh __ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com ___ ilugd mailing list [EMAIL PROTECTED] http://frodo.hserus.net/mailman/listinfo/ilugd
Re: [ilugd] connecting to two servers thr single IP Address
dear M.B, what is the OS in the PC having IP of 197.172.100.1 and clear my dout that what is the purpose of that pc just internet sharer for the client and then what is the the use of Sco server ? why Dont u use the Linux OS to share internet with your clients and there u can also troble-shoot your problem too . thanks Dhanraj sheth --- MALKIAT BENIPAL [EMAIL PROTECTED] wrote: Dear all, I have two servers with me. One is running Unix SCO 5.5 server and another one is a PC based, meant for providing internet connection sharing through dialup using samber server to differnt PCs for net surfing and mail distribution purpose. The IP address of SCO server is 100.0.0.1 and the IP address of PC server is 191.172.100.2. Now, I have a client PC and I am connected to both these servers thr lan card. By default I am connected to PC server for net surfing purpose. Now, if I wish to connect to Unix SCO Server then in network neighbourhod (win.98) of client PC, I have to change the address of my IP as 100.0.0.12 and reboot my PC. Now, I am able to connect to my SCO server. Again, if I wish to connect that PC server I have to change my IP address to that of PC one ie. 191.172.100.12. Is there any other way through which I am relieved of the task of changing the IP addresses of my client PC and restarting it again and again for switching over between these two servers. For your information, I am using telnet (win98) to connect to Unix SCO server. pl. guide. best regards, malkiat MALKIAT S. BENIPAL - Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software ___ ilugd mailing list [EMAIL PROTECTED] http://frodo.hserus.net/mailman/listinfo/ilugd __ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com ___ ilugd mailing list [EMAIL PROTECTED] http://frodo.hserus.net/mailman/listinfo/ilugd
Re: [ilugd] connecting to two servers thr single IP Address
Malkiat == MALKIAT BENIPAL [EMAIL PROTECTED] writes: Malkiat Dear all, I have two servers with me. One is running Malkiat Unix SCO 5.5 server and another one is a PC based, meant Malkiat for providing internet connection sharing through dialup Malkiat using samber server to differnt PCs for net surfing and Malkiat mail distribution purpose. The IP address of SCO server Malkiat is 100.0.0.1 and the IP address of PC server is Malkiat 191.172.100.2. Malkiat Now, I have a client PC and I am connected to both these Malkiat servers thr lan card. By default I am connected to PC Malkiat server for net surfing purpose. Now, if I wish to connect Malkiat to Unix SCO Server then in network neighbourhod (win.98) Malkiat of client PC, I have to change the address of my IP as Malkiat 100.0.0.12 and reboot my PC. Now, I am able to connect to Malkiat my SCO server. Again, if I wish to connect that PC server Malkiat I have to change my IP address to that of PC one Malkiat ie. 191.172.100.12. Malkiat Is there any other way through which I am relieved of the Malkiat task of changing the IP addresses of my client PC and Malkiat restarting it again and again for switching over between Malkiat these two servers. For your information, I am using Malkiat telnet (win98) to connect to Unix SCO server. pl. guide. ...and what does this have to do with Linux? -- Raju -- Raj Mathur[EMAIL PROTECTED] http://kandalaya.org/ GPG: 78D4 FC67 367F 40E2 0DD5 0FEF C968 D0EF CC68 D17F It is the mind that moves ___ ilugd mailing list [EMAIL PROTECTED] http://frodo.hserus.net/mailman/listinfo/ilugd
[ilugd] connecting to two servers thr single IP Address
Dear all, I have two servers with me. One is running Unix SCO 5.5 server and another one is a PC based, meant for providing internet connection sharing through dialup using samber server to differnt PCs for net surfing and mail distribution purpose. The IP address of SCO server is 100.0.0.1 and the IP address of PC server is 191.172.100.2. Now, I have a client PC and I am connected to both these servers thr lan card. By default I am connected to PC server for net surfing purpose. Now, if I wish to connect to Unix SCO Server then in network neighbourhod (win.98) of client PC, I have to change the address of my IP as 100.0.0.12 and reboot my PC. Now, I am able to connect to my SCO server. Again, if I wish to connect that PC server I have to change my IP address to that of PC one ie. 191.172.100.12. Is there any other way through which I am relieved of the task of changing the IP addresses of my client PC and restarting it again and again for switching over between these two servers. For your information, I am using telnet (win98) to connect to Unix SCO server. pl. guide. best regards, malkiat MALKIAT S. BENIPAL - Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software ___ ilugd mailing list [EMAIL PROTECTED] http://frodo.hserus.net/mailman/listinfo/ilugd
