KR> push pull tubes

2012-12-19 Thread rkp...@comcast.net
Greetings everyone, 
I used push pull tubes on my project.Just check out my photo bucket.
Robert pesak
Hermitage, Tn.


KR> 400 hours

2012-07-15 Thread rkp...@comcast.net
I used the the drawings that Jeff Scott sent me via e-mail.You can also use the 
drawings in Tony Bingelis Firewall Forward book. 
http://photobucket.com/robertskrs 

Robert Pesak 
Hermitage, Tn 
- Original Message -
From: "Phillip Matheson"  
To: "KRnet"  
Sent: Sunday, July 15, 2012 4:24:59 AM 
Subject: Re: KR> 400 hours 

Robert, 
I like the 0200 engine mount, ( what I can see of it. 
Did you make that your self? 

Phil Matheson 

-Original Message- 
From: rkp...@comcast.net 
Sent: Sunday, July 15, 2012 11:33 AM 
To: krnet 
Subject: KR> 400 hours 




Hi Everyone, 

It won't be long before I'll have mine in the air building time,as of this 
moment I have 3 hours sitting in my garage.Right now I'm finishing my 
cowling,trying to get it ready for paint late this summer or this fall. 
http://photobucket.com/robertskrs 

Robert Pesak 
___ 
Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. 
To UNsubscribe from KRnet, send a message to krnet-le...@mylist.net 
please see other KRnet info at http://www.krnet.org/info.html 


___ 
Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. 
To UNsubscribe from KRnet, send a message to krnet-le...@mylist.net 
please see other KRnet info at http://www.krnet.org/info.html 


KR> 400 hours

2012-07-14 Thread rkp...@comcast.net



Hi Everyone, 

 It won't be long before I'll have mine in the air building time,as of this 
moment I have 3 hours sitting in my garage.Right now I'm finishing my 
cowling,trying to get it ready for paint late this summer or this fall. 
http://photobucket.com/robertskrs 

Robert Pesak 


KR> cowling progress

2012-05-16 Thread rkp...@comcast.net



HI Everyone, 

I finished my cowling mold and covered the entire surface with black duck tape. 
This is just basic shape of the the cowling, I still have to shape some 
cylinder blisters and spinner fillet . Does anyone have Any suggestion on what 
kind of epoxy I should use that will take the heat? 

Robert Pesak 

Hermitage, Tn. 

http :// photobucket .com/ robertskrs 
  


KR> cowling mold

2012-05-14 Thread rkp...@comcast.net


Not sure why my link to my photobucket isn't working,but I'll try again. 

Robert Pesak 

Hermitage, Tn 

http://photobucket.com/robertskrs 



KR> Cowling mold

2012-05-13 Thread rkp...@comcast.net
I'm sorry,I thought I sent the link.Try this one.  


Robert Pesak 


Hermitage, Tn 

http://photobucket.com/robertskrs 


 


KR> cowling

2012-05-13 Thread rkp...@comcast.net


  

  

Hi Everyone, 

I started on my cowling this week. For some reason or another In couldn't get 
my mind around how I was going to build the mold.I came up with the idea of 
cutting the top and side in two diminutions and after doing that I was able to 
do the radius with sanding blocks. I still have to make the intakes for the 
carb , blisters for cylinders and the spinner fairing. 

  
Robert Pesak 
http :// photobucket .com/ robertskrs 


KR> Landings?

2012-03-24 Thread rkp...@comcast.net




Hi everyone, 

Mark I hope this will make you feel a Little better,on March 4th. I was doing 
touch and goes.The winds were 270 15G25 I was set up for landing on 19 at 
Lafayette, Tn. Well the first thing I thought of was was the weather briefing 
my wife gave me as I left the house.I THINK IT'S REALLY WINDY OUT THERE. What I 
thought was just a hard landing turned out to be much more. Prop strike and 
firewall damage. Everyone is involved NTSB, FAA and insurance company, the last 
three weeks have been quite a deal. 

  

Robert Pesak 

Hermitage, Tn. 
http://photobucket.com/robertskrs 


KR> update on i fly 720

2012-02-20 Thread rkp...@comcast.net


Hi Everyone, 

I used my iFlyGPS 720 for the first time,all I can say is WOW! You can't get a 
brighter day then were having this morning Nashville, Tn.   direct sunlight is 
no problem. All of the sectionals,weather and airport info can be downloaded 
using a wireless connection or a flash drive.This unit has many features the i 
Fly 700 didn't have. I think I'll be very happy with it. 

Robert Pesak 

http :// photobucket .com/ robertskrs 


KR> project update

2012-02-06 Thread rkp...@comcast.net


Hello Everyone, 

I just finished cutting my spinner to the Sterba prop,I hope I like it. About 
three  week I received the I fly 700, It worked great except you cant see the 
screen very well in the sunlight. I called Adventure Pilot last week and asked 
if I could exchange for the I fly 720,it wasn't a problem.I should have the new 
one in about a week. I'll let you know how the 720 works in about a week or so. 

Robert Pesak 

Hermitage, Tn. 

http://photobucket.com/robertskrs


KR> oil leek

2012-01-28 Thread rkp...@comcast.net



Hi Everyone, 

 The question I have is in regards to a leek I have around a couple of the stud 
nuts at the base of cylinders. The engine is a O200 that had a complete 
overhaul done about five years ago, it was pickled and judging by the the 
engine log book I trust it was done right.Is there any to correct this without 
removing the cylinders and resealing everything? As always, any help would be 
greatly appreciated. 

 Robert Pesak 

Hermitage, Tn. 

http://photobucket.com/robertskrs


KR> First start

2012-01-25 Thread rkp...@comcast.net


Hi Everyone, 

  This is the moment I have been waiting for. I hooked up the fuel 
line,pressure primed the oil system, put three gallons of 100LL in the header 
tank and run the the fuel pump till I got fuel in the carburetor,only turned 
over about three revolutions before she came to life. I ran engine till the oil 
temp came up, and then I checked for leaks. The only one I found was around a 
bolt on the base of number three cylinder, maybe just re-tork will fix the 
leek.No more airplane noises for me.YE H.! 

Robert Pesak 

Hermitage, Tn. 

http://photobucket.com/robertskrs


KR> project update

2012-01-04 Thread rkp...@comcast.net


I try to be really nice to my UPS lady because, she carried every part of my KR 
to the front door. 

Robert Pesak 

Hermitage, Tn 

http://photobucket.com/robertskrs 



  

- Original Message -




From: "Jeff Scott"  
To: "KRnet"  
Sent: Wednesday, January 4, 2012 5:05:49 PM 
Subject: Re: KR> project update 

Congratulations! Your plane is looking like we should be seeing it in Mt Vernon 
this fall. 

 I've had the same situation, except Fed Ex had rammed the prop through the end 
of the crate, then broke 4" off the tip. It took 4 months, several rounds of 
appeals, and a see you in court notice with Fed Ex Ground before they finally 
paid for it. Glad yours wasn't damaged. 

 -Jeff Scott 

- Original Message - 
From: rkp...@comcast.net 
Sent: 01/04/12 03:42 PM 
To: krnet 
Subject: KR> project update 

 Hi Everyone, Just a update on my project. Last Friday the UPS Lady carried a 
long box up to the front door,I ordered a 60" x 68" pitch from Ed Sterba, after 
she handed it over I seen a hole punched through the 1/4 plywood.I thought this 
can't be,she was nice enough to stay lone enough while I remover about thirty 
screws to check every thing out. IT LOOKS GREAT! The only thing I need before I 
can start cutting on the prop spinner is the front bulk head. HAPPY NEW YEAR 
EVERYONE. Robert Pesak Hermitage, Tn http://photobucket.com/robertskrs 
___ 
Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp 
to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net 
please see other KRnet info at http://www.krnet.org/info.html 


KR> project update

2012-01-04 Thread rkp...@comcast.net



Hi Everyone, 

 Just a update on my project. Last Friday the UPS Lady carried a long box up to 
the front door,I ordered a 60" x 68" pitch from Ed Sterba, after she handed it 
over I seen a hole punched through the 1/4 plywood.I thought this can't be,she 
was nice enough to stay lone enough while I remover about thirty screws to 
check every thing out. IT LOOKS GREAT! The only thing I need before I can start 
cutting on the prop spinner is the front bulk head. 

HAPPY NEW YEAR EVERYONE. 

Robert Pesak 

Hermitage, Tn 

http://photobucket.com/robertskrs


KR> project update

2012-01-04 Thread rkp...@comcast.net


Hi Everyone, 

 Just a update on my project. Last Friday the UPS Lady carried a long box up to 
the front door,I ordered a 60" x 68" pitch from Ed Sterba, after she handed it 
over I seen a hole punched through the 1/4 plywood.I thought this can't be,she 
was nice enough to stay lone enough while I remover about thirty screws to 
check every thing out. IT LOOKS GREAT! The only thing I need before I can start 
cutting on the prop spinner is the front bulk head. 

HAPPY NEW YEAR EVERYONE. 

Robert Pesak 

Hermitage, Tn 

http://photobucket.com/robertskrs


KR> new pics

2011-12-18 Thread rkp...@comcast.net


Try this link it may work better. 

Robert Pesak 

http://photobucket.com/robertskrs 


KR> new pics

2011-12-18 Thread rkp...@comcast.net


Hi Everyone, 

 I hope everyone is is well, I took some time to update my  PotoBucket . One of 
the things I changed was the finish on my panel,at first I painted with a 
hammered gray finish,it wasn't long before I realized it was very fragile and 
would chip easily.After taking every apart and striping all the paint,I took it 
and all the other parts to get power coated with Matt white finish. I was 
hoping to fly too the next gathering, but at this rate I'm not so sure. 

 Marry Christmas from the Pesak family. 

   Robert Pesak 

   Hermitage, Tn. 

http://s449.photobucket.com/albums/qq219/rkpsk1/?action=view¤t=P1010015.jpg


KR> propeller bolts

2011-12-09 Thread rkp...@comcast.net


Hi Everyone, 

 Anyone know where I can buy prop bolts 51/4 inch long prop bolts? I looked on 
the ACS site but longest one I seen was around four inches long.Measuring the 
thickness of the prop, crush plate and the forward and aft bulkhead, I need 
about 5 1/4 inch bolt. Any help would be greatly appreciated. 

 Robert Pesak 

 Hermitage, Tn 

http://photobucket.com/robertskrs


KR> leading edge fuel tanks

2011-07-19 Thread rkp...@comcast.net


Michael, 

   I built fuel tank in the leading edge of my wings. Each one holds right at 
nine gallons, ther are pictures on my photo bucket. 

 Robert Pesak 

Hermitage, Tn. 

http://photobucket.com/robertskrs 


KR> update on project

2011-06-17 Thread rkp...@comcast.net


Hi Everyone, 

 I haven't had much time to update my photobucket. I'm trying to finish my 
panel I painted it and started to install the instruments for the final time. I 
took some pictures this afternoon and uploaded them. Hope to see you all in 
Oshkosh next month. 

Robert Pesak 

Hermitage, Tn. 

http://photobucket.com/robertskrs 


KR> fuel tanks

2011-02-13 Thread rkp...@comcast.net




Dan, 

  What thickness was the material you use on your fuel tanks? I'm thinking 
about building my header tank. 

Robert Pesak 

Hermitage, Tn.  

http://photobucket.com/robertskrs


KR> insterment wiring

2010-12-18 Thread rkp...@comcast.net



Hi Everyone, 

 I have a question on hooking up my CHT sensor and my EGT sensor. The leads on 
the sensors are only about 12" long. Do I need to use the same type of wire or 
can I use 
any wire for the extensions to reach the gauge? As always, thanks for the help. 

Robert Pesak 

Hermitage, Tn. 

http://photobucket.com/robertskrs


KR> progress

2010-12-04 Thread rkp...@comcast.net


Hi Everyone, 

I can remember the first part I  built for my KR-2S,it was December 2005. The 
first part I built, was a one piece main spar. It doesn't seem like five years 
ago. 

Robert Pesak 

Hermitage, Tn. 

http://photobucket.com/robertskrs


KR> O-200 questoin

2010-11-28 Thread rkp...@comcast.net



Hi Everyone, 

The question I have is in regards to the oil temperature senders. I need the 
reducer for the sending unit. Anyone know where I can get one? The one Wicks 
sells is with the sender for a Mitchell oil temp gauge, not sure if it will 
work on my ISS gauge. Any help will be appreciated. 

Robert Pesak 

Hermitage, Tn. 

http://photobucket.com/robertskrs 


KR> wiring ignition switch

2010-11-03 Thread rkp...@comcast.net



Hi All, 

I'm getting ready to place a order,The question I have is concerning the gauge 
of wiring for my ignition switch.The switch that I got calls for shielded 
wire,but doesn't say anything the gauge. Thanks for all the help. 
Robert Pesak 

Hermitage, Tn. 

http://photobucket.com/robertskrs 


KR> not sure

2010-10-30 Thread rkp...@comcast.net


Hi Every one 

 A friend of mine was traveling south on  I-65 last night around Huntsville 
Al., He told me your not going to belive this, but there is a KR sitting along 
the side of the interstate. 
Robert Pesak 

Hermitage, Tn. 

http://photobucket.com/robertskrs


KR> wiring panel

2010-10-29 Thread rkp...@comcast.net


Hi Everyone, 

I have also started to wire my panel,I think it's relaxing. 

Robert Pesak 

Hermitage,Tn. 

http://photobucket.com/robertskrs 


KR> progress

2010-10-24 Thread rkp...@comcast.net


Hi Everyone, 

 Today I got my nerve up to start cutting on the panel.Before long I realized I 
made a mistake on the 3 1/8" cut outs, I placed them to close to each other.So 
to fix the problem I turned the two on the bottom into 2 1/4" holes. One very 
important thing to remember when building  a Kr, it's not messed up until you 
can't fix it. 

Robert Pesak 

Hermitage, Tn. 

http://photobucket.com/robertskrs 


KR> vinal ester

2010-10-09 Thread rkp...@comcast.net



Dan , the last I bought some venal ester it was from a boat builder we had in 
Nashville. I brought my own gallon containers and he  filled them from a 55 
gallon drum.I don't remember what he charged, but it wasn't much . 

Robert Pesak 

Hermitage, Tn. 

http://photobucket.com/robertskrs


KR> Need help on the best Epoxy to use with micro balloons.

2010-10-06 Thread rkp...@comcast.net


I personally am using using the west system. One of the things to remember is, 
when mixing micro balloons, the more micro balloons the easier to sand and it 
will weigh less. 

Robert Pesak 

Hermitage, Tn. 

http://photobucket.com/robertskrs 

- Original Message - 
From: "rick newton"  
To: kr...@mylist.net 
Sent: Tuesday, October 5, 2010 10:19:36 PM 
Subject: KR> Need help on the best Epoxy to use with micro balloons. 


Hi, I?m a new pilot and a new KR owner;   
  
I live near Houston TX and wanted a inexpensive airplane both to build and to 
opperate. I just picked up a project that was started in 1974.I bought this Kr 
1 (almost completed project) that is in amazingly good shape. It's all there, 
motor, prop, gages, canopy and everything is done except the finish. 
  
My little plane needs body work!, I called around to aircraft supply houses and 
couldn't get any clear guidance on the latest improved bonding agents with 
filler.  I read the article on "micro balloons" and how to do the bodywork but 
again wasn't clear on the epoxy to use. 

  
Would someone who know this kind of stuff give me some direction and a resource 
to get? Please enlighten me. I would love to call someone and ask questions 
about body work i.e. adding more layers of fiber etc Anyone in Texas also 
would be good. :) 
  
thanks 
rick        
___ 
Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp 
to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net 
please see other KRnet info at http://www.krnet.org/info.html 


KR> Progress

2010-10-03 Thread rkp...@comcast.net



Hi Everyone 

  Just  a little progress report on my project. I'm getting ready install the 
aft deck.I spent a week finishing all the wiring for nav.lights,strobe 
light,and the trim servo.This week end I installed the comm.antenna,xponder 
antenna and the static vents. 

  Robert Pesak 

  Hermitage, Tn. 

http://photobucket.com/robertskrs


KR> seat belts

2010-09-28 Thread rkp...@comcast.net



Hi Everyone, 

 I'm not sure where I seen the pictures of two cables  from the aft of the 
fuselage for the seat belts. If anyone has the link for that setup,please send 
it. 

  Robert Pesak 

  Hermitage, Tn. 

http://photobucket.com/robertskrs


KR> pitot static port

2010-09-23 Thread rkp...@comcast.net



Hi Everyone, 

  The question I have is,Where is the best location for the pitot static port? 
I do understand that it will make a deference because every kr is not shaped 
the same,but just a general location would with the plumbing. 
 Robert Pesak 

 Hermitage, Tn. 

http://photobucket.com/robertskrs


KR> withcamping

2010-09-09 Thread rkp...@comcast.net


 Hi Everyone, 

   I haven't heard anything about the camping area,I'll be up with my camper 
Friday afternoon. 
Robert Pesak 

Hermitage, Tn. 

http://photobucket.com/robertskrs


KR> trim servo

2010-09-06 Thread rkp...@comcast.net


Hi Everyone, 

  I hope everyone is having a great labor day week end. The UPS man delivered  
a package on Friday, and it was just the thing to keep me busy this weekend. I 
ordered my trim servo and grips from Ray Allen on Monday and they delivered on 
Friday,great company!!! http :// photobucket .com/ robertskrs 
Robert Pesak 

Hermitage, Tn. 

http :// photobucket .com/ robertskrs


KR> kr for sale

2010-09-01 Thread rkp...@comcast.net




 Hi Everyone, 

   A fellow at muhlenberge County Airport in Greenville Ky, has a kr that is 
well on it's way. I personally  have seen it,and the workmanship looks pretty 
good.I just got off the phone with him and he asked if I would let everyone 
that he would bring it to the gathering Saturday morning. He gave me a list of 
items that go with the project but, I think if anyone is interested you may 
call him yourself.The number that he gave me is  270-399-0579 his name is Ralph 
Orear 



  Robert Pesak 

  Hermitage, Tn. 

http://photobucket.com/robertskrs


KR> stainless exhaust parts

2010-08-04 Thread rkp...@comcast.net


Hi Everyone, 

  Anyone out there know of a good supplier of stainless steel exhaust pipe? 

   Robert Pesak 

   Hermitage, Tn. 


KR> Oshkosh

2010-07-20 Thread rkp...@comcast.net


Hi All, 

  I will be in Oshkosh Sunday morning,hopefully will be staying in the private 
campgrounds across from the ultralight parking. See ya there. 
    Robert Pesak 

    Hermitage, Tn. 

http://photobucket.com/robertskrs


Fwd: KR> bike trip

2010-07-04 Thread rkp...@comcast.net


All the hardware in question was hand made using a metal cutting band saw to 
cut the steel. or a regular wood cutting miter saw with a 60 tooth carbide 
blade to cut the 6061-T6. All the steel was welded using aTIG welder.Nothing 
real high tech in my shop. One other thing I didn't mention, when cuting the 
steel,a jig saw with a metal cutting blade works great for cutting steel.Infact 
I use it more then my band saw. 



 Robert Pesak 

 Hermitage, Tn. 

http://photobucket.com/robertskrs 
- Forwarded Message - 
From: "John Skorczewski"  
To: kr...@mylist.net 
Sent: Sunday, July 4, 2010 1:59:02 PM 
Subject: RE: KR> bike trip 




Dr John Skorczewski 
1325 Jefferson Dr. 
Nashville, IL 62263 
618-327-4348 (work) 
618-327-4264 (home) 
314-374-4569 (cell) 


Very nice photos and workmanship. I have a question. Did he fabricate the 
hardware for his canopy hinge and wing control surfaces himself or are they 
prefab? The hardware looks very nice. 

  

        
_ 
The New Busy is not the old busy. Search, chat and e-mail from your inbox. 
http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_3
 
___ 
Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp 
to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net 
please see other KRnet info at http://www.krnet.org/info.html 


KR> bike trip

2010-07-03 Thread rkp...@comcast.net


Hi everyone 

  I sent the link for my pictures,but I'm not sure that it came out right. I 
think this will work. 



  Robert Pesak 

  Hermitage, Tn. 

http :// photobucket .com/ robertskrs 


KR> bike trip

2010-07-03 Thread rkp...@comcast.net


Hi Everyone, 

   I just got home from a place called Hazel green Al. It's one hundred 
fourteen miles from my home in Hermitage, Tn. I had a great time visiting with 
everyone at Mark's airport, as I watched them build a deck onto the new club 
house. I hope it wont be to much longer before I can fly down,but I'm not 
complaining...The ride was great. 

    

    Robert Pesak 

    Hermitage, Tn. 
http://s449.photobucket.com/albums/qq219/rkpsk1/?action=view¤t=P2010002.jpg


KR> prop hub extension

2010-05-10 Thread rkp...@comcast.net


 Hi everyone 

   I received my prop hub extension from Saber Inc., it looks great. I couldn't 
wait to see how it looked on the front of the 0-200. It seem to be a very tight 
fit over the prop hub on the engine, it would only go about 1/4" and stop. 
Would I have to first heat the prop hub extension to install it? 

    

 Robert Pesak 

 Hermitage, Tn.


KR> cowling

2010-03-14 Thread rkp...@comcast.net


Hi everyone, 
   I looking through some of the old gatherings,I happened on a picture that 
was taken in Red Oak, Ia. The KR I noticed  was owned by a fellow by the name 
of Steve Alderman.The caption under the picture mentioned the cowling was made 
for a O-200 by Dan Deihl. Is there anyone still making that cowling, or was 
that just a one time thing? 

    

   Robert Pesak 

   Hermitage, Tn.


KR> paint or glass

2010-03-07 Thread rkp...@comcast.net


Hi Mike 

  I personally think covering all wood surface should be covered with with deck 
cloth , this will keep small cracks from showing up later on.


KR> weight on nose wheel

2010-03-03 Thread rkp...@comcast.net


Hi everyone 

Can any of you guys using a  O-200 remember what your weight on the nose wheel 
was? 



    Robert Pesak 

    Hermitage,Tn. 



   


KR> Nose gear leg

2010-02-24 Thread rkp...@comcast.net


Hi everyone, 

  I would like to build my own nose gear assembly. The question I have is, What 
would be a safe tube and wall dimension . I have seen some great looking home 
made nose gear but didn't look to see what kine of material was used. 

 



    Robert K. Pesak 

    Hermitage,Tn. 


KR> nose gear

2010-02-01 Thread rkp...@comcast.net


Hi everyone 

  Anyone out there have a nose gear assembly they would to sell? If so please 
let me know. I am getting ready to order one,but I thought I would check with 
everyone first. 






  Robert Pesak 

  Hermitage, Tn.