[lace] A T-shirt for the in crowd?

2003-12-15 Thread Margot Walker
I love it.

On Monday, December 15, 2003, at 02:00  PM, Carol Adkinson wrote:

If nothing else, we could have the slogan Lacemakers do it on a 
pillow on
a sweatshirt/T shirt, with a piece of lace.


Margot Walker in Halifax on the east coast of Canada
[EMAIL PROTECTED]
-
To unsubscribe send email to [EMAIL PROTECTED] containing the line:
unsubscribe lace [EMAIL PROTECTED] For help, write to [EMAIL PROTECTED]


[lace] A T-shirt for the in crowd

2003-12-14 Thread Jean Nathan
Ann wrote:

The problem that I met with was that,
after a couple of washes, the brightly coloured images had more or less
turned into grey-scale, so I became discouraged by this disappointment.  Can
anyone tell me if there is any way to make the colours colour-fast?

I don't know if there are differences in the inks for different printers, or
if ink for modern printers is better than for the older ones, but DH has
been wearing the two T-shirts he made on a modern Epson (not intending to
advertise) in rotation throughout the summer. He goes out on his bicycle
every day, and wears a clean T-shirt each day. They've each been washed by
hand many times and the images are as good as the day he made them.

Jean in Poole

-
To unsubscribe send email to [EMAIL PROTECTED] containing the line:
unsubscribe lace [EMAIL PROTECTED] For help, write to [EMAIL PROTECTED]


Re: [lace] A T-shirt for the in crowd?

2003-12-14 Thread dominique
Weeell it all depends on the thread you've been using for the samples and 
the size of the pattern .. lol .. three huge tallies with a bad one in the 
middle should do the trick nicely . 

dominique from Paris 

Clay Blackwell a fait jouer ses doigts de fée pour écrire à  ÒRe: [lace] A 
T-shirt for the in crowd?Ó.
[2003/12/13 13:17]

 I think it's a clever idea - but wonder if the medium is
 going to do it justice?  If you look at your other lacey
 t-shirts, you'll see that there isn't much detail to be
 seen...  the individual threads just aren't there.  So the
 oops samples may not look much different from the correct
 version...
 
 Hate to be a wet blanket, but I'm a skeptic... (in regards
 to this idea...)
 
 Clay
 
 - Original Message - 
 From: Tamara P. Duvall [EMAIL PROTECTED]
 To: lace Arachne [EMAIL PROTECTED]
 Sent: Friday, December 12, 2003 11:45 PM
 Subject: [lace] A T-shirt for the in crowd?
 
 
  Gentle Spiders,
 
  The last week or so, I've been corresponding with several
 BL novices
  on the finer points of Torchon bookmarks (I have the book
 in which the
  bookmarks were published, so could check what they were
 talking about).
  Three of them (the novices) mentioned -- as if it were a
 dirty secret
  -- a *general* problem or two they were having (not the
 same ones). I
  couldn't begin to understand why they thought those
 problems were
  something to be ashamed of; when I was starting, the
 overload of info
  was overwhelming  -- *everything* was new, and everything
 had to be
  memorised before the fingers (skills) took over... Up a
 creek without
  a paddle is where I felt I was (of course, that was '89,
 I had only
  one book, with outdated info re: suppliers, and no Arachne
 in sight
  g).
 
  So, as I was writing back, I kept thinking: been there,
 done that...
  And then realised that, no, I did *not* have a T-shirt to
 prove it; I
  have several lacemaking T-shirts, but not *that* one.
 
  I'd love to have a T-shirt (either short or long-sleeved)
 which said
  been there, done that... Ooops and then showed some lace
 (Torchon?)
  with common oopsies... My personal favourite would be
 the messed-up
  footside -- pin under 2 instead of under 4 for just one
 pin -- that's
  one that still happens to me sometimes (in Milanese).  But
 I'm sure
  there are other lovely ones worth commemorating... :)
  [EMAIL PROTECTED] at the bottom optional...
 
  Non-BL-ers wouldn't understand it, but then they don't
 understand the
  straight ones, either. For *us*, however... On the one
 hand, it's a
  statement of improvement (been there, done that, but am
 not doing it
  anymore). On the other hand, it'd be reassuring (I should
 think) to
  novices to know that *everyone* had, at some point, worn
 the lace
  diapers but did manage to get toilet trained in the
 end...
 
  If y'all think the idea is worth pursuing, and if there's
 someone among
  us who'd be willing to get such a T-shirt organised, I'd
 volunteer to
  make the oops-y lace for it *After* New Year's g)
 Provided, of
  course, other people on the list were willing to share
 their particular
  bugaboos (a pine-cone tally among a cluster of perfect
 ones?) overcome
  or not...
 
  -
  Tamara P Duvall
  Lexington, Virginia,  USA
  Formerly of Warsaw, Poland
  http://lorien.emufarm.org/~tpd/
 
  -
  To unsubscribe send email to [EMAIL PROTECTED]
 containing the line:
  unsubscribe lace [EMAIL PROTECTED] For help, write to
 [EMAIL PROTECTED]
 
 -
 To unsubscribe send email to [EMAIL PROTECTED] containing the line:
 unsubscribe lace [EMAIL PROTECTED] For help, write to 
 [EMAIL PROTECTED]

-
To unsubscribe send email to [EMAIL PROTECTED] containing the line:
unsubscribe lace [EMAIL PROTECTED] For help, write to [EMAIL PROTECTED]


Re: [lace] A T-shirt for the in crowd?

2003-12-13 Thread Clay Blackwell
I think it's a clever idea - but wonder if the medium is
going to do it justice?  If you look at your other lacey
t-shirts, you'll see that there isn't much detail to be
seen...  the individual threads just aren't there.  So the
oops samples may not look much different from the correct
version...

Hate to be a wet blanket, but I'm a skeptic... (in regards
to this idea...)

Clay

- Original Message - 
From: Tamara P. Duvall [EMAIL PROTECTED]
To: lace Arachne [EMAIL PROTECTED]
Sent: Friday, December 12, 2003 11:45 PM
Subject: [lace] A T-shirt for the in crowd?


 Gentle Spiders,

 The last week or so, I've been corresponding with several
BL novices
 on the finer points of Torchon bookmarks (I have the book
in which the
 bookmarks were published, so could check what they were
talking about).
 Three of them (the novices) mentioned -- as if it were a
dirty secret
 -- a *general* problem or two they were having (not the
same ones). I
 couldn't begin to understand why they thought those
problems were
 something to be ashamed of; when I was starting, the
overload of info
 was overwhelming  -- *everything* was new, and everything
had to be
 memorised before the fingers (skills) took over... Up a
creek without
 a paddle is where I felt I was (of course, that was '89,
I had only
 one book, with outdated info re: suppliers, and no Arachne
in sight
 g).

 So, as I was writing back, I kept thinking: been there,
done that...
 And then realised that, no, I did *not* have a T-shirt to
prove it; I
 have several lacemaking T-shirts, but not *that* one.

 I'd love to have a T-shirt (either short or long-sleeved)
which said
 been there, done that... Ooops and then showed some lace
(Torchon?)
 with common oopsies... My personal favourite would be
the messed-up
 footside -- pin under 2 instead of under 4 for just one
pin -- that's
 one that still happens to me sometimes (in Milanese).  But
I'm sure
 there are other lovely ones worth commemorating... :)
 [EMAIL PROTECTED] at the bottom optional...

 Non-BL-ers wouldn't understand it, but then they don't
understand the
 straight ones, either. For *us*, however... On the one
hand, it's a
 statement of improvement (been there, done that, but am
not doing it
 anymore). On the other hand, it'd be reassuring (I should
think) to
 novices to know that *everyone* had, at some point, worn
the lace
 diapers but did manage to get toilet trained in the
end...

 If y'all think the idea is worth pursuing, and if there's
someone among
 us who'd be willing to get such a T-shirt organised, I'd
volunteer to
 make the oops-y lace for it *After* New Year's g)
Provided, of
 course, other people on the list were willing to share
their particular
 bugaboos (a pine-cone tally among a cluster of perfect
ones?) overcome
 or not...

 -
 Tamara P Duvall
 Lexington, Virginia,  USA
 Formerly of Warsaw, Poland
 http://lorien.emufarm.org/~tpd/

 -
 To unsubscribe send email to [EMAIL PROTECTED]
containing the line:
 unsubscribe lace [EMAIL PROTECTED] For help, write to
[EMAIL PROTECTED]

-
To unsubscribe send email to [EMAIL PROTECTED] containing the line:
unsubscribe lace [EMAIL PROTECTED] For help, write to [EMAIL PROTECTED]


[lace] A T-shirt for the in crowd

2003-12-13 Thread Jean Nathan
DH has successfully printed T-shirts with photos of birds that he took with
his digital camera. They came out extremely well because the colours were
bright and the images sharp. He used T-shirt transfer paper for inkjet
printers, which should be available from most computer supplies shops.

The process was: open the image in a suitable program, mirror the image,
print it selecting the appropriate setting on the printer for transfer
paper, trim round the edge of the printout leaving a thin border around the
edge. Then put a board covered with a pillowcase or similar inside a white
T-shirt (needs to be white or light so the border on the print doesn't
show), place the transfer paper, printed side down, on the T-shirt and iron
over it as directed on the paper packet. Allow to cool, peel off the paper.
Fix the image by placing a piece of white paper over it and ironing for 10
seconds. Peel the paper while still hot. Leave the T-shirt for 24 hours.
Wash before wearing. Iron the image on the reverse side only.

I was going to try it it with a scan of some of my nicer bobbins, but, being
3D, they created a shadow on the scan which I wasn't happy with.

Jean in Poole

-
To unsubscribe send email to [EMAIL PROTECTED] containing the line:
unsubscribe lace [EMAIL PROTECTED] For help, write to [EMAIL PROTECTED]


[lace] A T-shirt for the in crowd (2)

2003-12-13 Thread Jean Nathan
Forgot to say that the border round the print appears as a white boarder n
the T-shirt. Might be got rid of if you were brave enough not to have a
border round the edge. I assume that without it, the edges of the image
might not appear sharp.

Clay wrote:

If you look at your other lacey
t-shirts, you'll see that there isn't much detail to be
seen...  the individual threads just aren't there.

I scanned my first folding fan into Photosuite which automatically magnified
the image. I'd been very proud of it at normal size, but at two and a half
times normal, every mistake jumped out of the screen and the paper I printed
it on! Never again - unless it's to show the mistakes.

Jean in Poole

-
To unsubscribe send email to [EMAIL PROTECTED] containing the line:
unsubscribe lace [EMAIL PROTECTED] For help, write to [EMAIL PROTECTED]


Re: [lace] A T-shirt for the in crowd

2003-12-13 Thread Steph Peters
On Sat, 13 Dec 2003 13:57:58 -, Jean wrote:
DH has successfully printed T-shirts with photos of birds that he took with
his digital camera. They came out extremely well because the colours were
bright and the images sharp. He used T-shirt transfer paper for inkjet
printers, which should be available from most computer supplies shops.

I've used the process Jean described to put an image of lace on  a T shirt.
First I adapted an out of copyright Bedfordshire design and made the lace, a
motif about 10 cm tall, to avoid having to ask a designer for permission to
use their copyrighted lace.  Then I scanned the lace into my computer.  It
took several evenings of working with a graphics program to delete the
background, mess around with filters till I decided on a wood effect,
enlarge the image to about 25cm, clean up all the stray pixels of the wrong
colour, and work out the relationship between colours on the screen and
colours on the printer to get the image I wanted on paper.  The transfer
paper (from a photographic shop in my case) prints a bit darker than plain
paper.  Then I took a white T shirt, dyed it in once in yellow and then a
second time in blue to get a greenish textured effect and printed the image
on to the T shirt.  Finally I had something I could wear and was pleased
with.  A few of you will have seen the finished item at UK or German Lace
Guild conventions.  I call it my 'Grinling Gibbons' as it is lace rendered
in a wood effect.  I did another pink and yellow piece of lace on a blue T
shirt but wasn't quite as pleased with it.

But sadly I have to report that 2 years on the transfer is flaking off the T
shirt, despite having been washed by hand (well at least until it had
substantial damage).  So these things don't last. But now at least I only
have to print out the picture again and find a T shirt to put it on.
--
A clergyman is one who feels himself called upon to live without 
working at the expense of the rascals who work to live. - Voltaire
Steph Peters  [EMAIL PROTECTED]
Tatting, lace  stitching page http://www.sandbenders.demon.co.uk/index.htm

-
To unsubscribe send email to [EMAIL PROTECTED] containing the line:
unsubscribe lace [EMAIL PROTECTED] For help, write to [EMAIL PROTECTED]


Re: [lace] A T-shirt for the in crowd

2003-12-13 Thread ann DURANT
When I was doing City  Guilds in Creative Computing - Part 1, which I did
actually finish! - I made quite a large number of T-shirts, most of them
featuring original bits of lace.  The problem that I met with was that,
after a couple of washes, the brightly coloured images had more or less
turned into grey-scale, so I became discouraged by this disappointment.  Can
anyone tell me if there is any way to make the colours colour-fast?

Ann in Manchester, UK
- Original Message - 
From: Jean Nathan [EMAIL PROTECTED]
To: Lace [EMAIL PROTECTED]
Sent: Saturday, December 13, 2003 1:57 PM
Subject: [lace] A T-shirt for the in crowd


DH has successfully printed T-shirts with photos of birds that he took with
his digital camera. They came out extremely well because the colours were
bright and the images sharp. He used T-shirt transfer paper for inkjet
printers, which should be available from most computer supplies shops.

The process was: open the image in a suitable program, mirror the image,
print it selecting the appropriate setting on the printer for transfer
paper, trim round the edge of the printout leaving a thin border around the
edge. Then put a board covered with a pillowcase or similar inside a white
T-shirt (needs to be white or light so the border on the print doesn't
show), place the transfer paper, printed side down, on the T-shirt and iron
over it as directed on the paper packet. Allow to cool, peel off the paper.
Fix the image by placing a piece of white paper over it and ironing for 10
seconds. Peel the paper while still hot. Leave the T-shirt for 24 hours.
Wash before wearing. Iron the image on the reverse side only.

I was going to try it it with a scan of some of my nicer bobbins, but, being
3D, they created a shadow on the scan which I wasn't happy with.

Jean in Poole

-
To unsubscribe send email to [EMAIL PROTECTED] containing the line:
unsubscribe lace [EMAIL PROTECTED] For help, write to [EMAIL PROTECTED]

-
To unsubscribe send email to [EMAIL PROTECTED] containing the line:
unsubscribe lace [EMAIL PROTECTED] For help, write to [EMAIL PROTECTED]


[lace] A T-shirt for the in crowd?

2003-12-12 Thread Tamara P. Duvall
Gentle Spiders,

The last week or so, I've been corresponding with several BL novices 
on the finer points of Torchon bookmarks (I have the book in which the 
bookmarks were published, so could check what they were talking about). 
Three of them (the novices) mentioned -- as if it were a dirty secret 
-- a *general* problem or two they were having (not the same ones). I 
couldn't begin to understand why they thought those problems were 
something to be ashamed of; when I was starting, the overload of info 
was overwhelming  -- *everything* was new, and everything had to be 
memorised before the fingers (skills) took over... Up a creek without 
a paddle is where I felt I was (of course, that was '89, I had only 
one book, with outdated info re: suppliers, and no Arachne in sight 
g).

So, as I was writing back, I kept thinking: been there, done that...  
And then realised that, no, I did *not* have a T-shirt to prove it; I 
have several lacemaking T-shirts, but not *that* one.

I'd love to have a T-shirt (either short or long-sleeved) which said 
been there, done that... Ooops and then showed some lace (Torchon?) 
with common oopsies... My personal favourite would be the messed-up 
footside -- pin under 2 instead of under 4 for just one pin -- that's 
one that still happens to me sometimes (in Milanese).  But I'm sure 
there are other lovely ones worth commemorating... :)  
[EMAIL PROTECTED] at the bottom optional...

Non-BL-ers wouldn't understand it, but then they don't understand the 
straight ones, either. For *us*, however... On the one hand, it's a 
statement of improvement (been there, done that, but am not doing it 
anymore). On the other hand, it'd be reassuring (I should think) to 
novices to know that *everyone* had, at some point, worn the lace 
diapers but did manage to get toilet trained in the end...

If y'all think the idea is worth pursuing, and if there's someone among 
us who'd be willing to get such a T-shirt organised, I'd volunteer to 
make the oops-y lace for it *After* New Year's g) Provided, of 
course, other people on the list were willing to share their particular 
bugaboos (a pine-cone tally among a cluster of perfect ones?) overcome 
or not...

-
Tamara P Duvall
Lexington, Virginia,  USA
Formerly of Warsaw, Poland
http://lorien.emufarm.org/~tpd/
-
To unsubscribe send email to [EMAIL PROTECTED] containing the line:
unsubscribe lace [EMAIL PROTECTED] For help, write to [EMAIL PROTECTED]