Re: Name question

[Tim Ziegler]

mething that will
>>>> fit, under the kitchen table, when not in use. ) ;-p
>>>>
>>>> C.A.G.
>>>>
>>>> On Wednesday, November 9, 2022 at 06:45:08 AM EST, Tim Ziegler <
>>>> timjz...@gmail.com> wrote:
>>>>
>>>>
>>>> Yup pretty much all one can say at this point.
>>>> We all know they are big into CnC and that machine was the true
>>>> beginning of it I think. (though it would be nice to have one)
>>>>
>>>> Kind Regards,
>>>>
>>>> Timothy J. Ziegler
>>>> Ziegler WoodWork & Specialty
>>>> 14171 160th Ave.
>>>> Foreston MN 56330
>>>>
>>>> 320-294-5798 <(320)%20294-5798> shop
>>>> 320-630-2243 <(320)%20630-2243> cell
>>>>
>>>>
>>>> On Wed, Nov 9, 2022 at 4:34 AM Tim Krause < artma...@comcast.net>
>>>> wrote:
>>>>
>>>> I just tripple checked...nope still not here. That's okay, I was going
>>>> to use the mill for suporting others. But, I don't think many were made.
>>>> It's all just water under the bridge.
>>>>
>>>> Tim
>>>> On Nov 6, 2022, at 7:31 PM, bulk...@mmnet.com.au wrote:
>>>>
>>>> Well holy crap Tim Ks mill must be sitting at his front door.
>>>>
>>>>
>>>>
>>>> Bill
>>>>
>>>>
>>>>
>>>> *From:* legacy-orna...@googlegroups.com <
>>>> legacy-orna...@googlegroups.com> *On Behalf Of *Tim Ziegler
>>>> *Sent:* Monday, 7 November 2022 2:14 PM
>>>> *To:* legacy-orna...@googlegroups.com
>>>> *Subject:* Re: Name question
>>>>
>>>>
>>>>
>>>> Here you are Bill
>>>>
>>>> Kind Regards,
>>>>
>>>>
>>>>
>>>> Timothy J. Ziegler
>>>>
>>>> Ziegler WoodWork & Specialty
>>>>
>>>> 14171 160th Ave.
>>>>
>>>> Foreston MN 56330
>>>>
>>>>
>>>>
>>>> 320-294-5798 <(320)%20294-5798> shop
>>>>
>>>> 320-630-2243 <(320)%20630-2243> cell
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> On Sun, Nov 6, 2022 at 9:10 PM  wrote:
>>>>
>>>> I have never seen a flying pig lol
>>>>
>>>>
>>>>
>>>> Bill
>>>>
>>>>
>>>>
>>>> *From:* 'Curt George' via Legacy Ornamental Mills <
>>>> legacy-orna...@googlegroups.com>
>>>> *Sent:* Monday, 7 November 2022 1:31 PM
>>>> *To:* legacy-orna...@googlegroups.com
>>>> *Subject:* Re: Name question
>>>>
>>>>
>>>>
>>>> Hello Mac.
>>>>
>>>>
>>>>
>>>> YES! and No.
>>>>
>>>>
>>>>
>>>> Yes Andy did promise Tim a mill for all the reasons you stated.
>>>>
>>>>
>>>>
>>>> And No. I have no idea when it will get to him?  (I'm sure it was an
>>>> Honest mistake, and it will arrive any day...) ;-p
>>>>
>>>>
>>>>
>>>> C.A.G.
>>>>
>>>> On Sunday, November 6, 2022 at 09:18:38 PM EST, M.W.Foscue <
>>>> mwfo...@earthlink.net> wrote:
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> At the risk of digging up old bones - isn't that the Mill that Legacy
>>>> was going to send Tim K. years ago - in appreciation for all that he had
>>>> done for the Legacy Mill community?
>>>>
>>>> Mac
>>>>
>>>> --
>>>> --
>>>>
>>>> -Original Message-
>>>> From: 
>>>> Sent: Nov 6, 2022 3:43 PM
>>>> To: 
>>>> Subject: RE: Name question
>>>>
>>>>
>>>>
>>>> This is the evolution mill
>>>>
>>>> Bill
>>>>
>>>> *From:* legacy-orna...@googlegroups.com <
>>>> legacy-orna...@googlegroups.com> *On Behalf Of *Dan Krager
>>>> *Sent:* Monday, 7 November 2022 2:31 AM
>>>> *To:* Legacy Ornamental Mills 
>>>> *Subject:* Name question
>>>>
>

Re: Name question

['finu...@aol.com' via Legacy Ornamental Mills]

;>
>>> Timothy J. Ziegler 
>>> Ziegler WoodWork & Specialty 
>>> 14171 160th Ave. 
>>> Foreston MN 56330 
>>>
>>> 320-294-5798 <(320)%20294-5798> shop 
>>> 320-630-2243 <(320)%20630-2243> cell 
>>>
>>>
>>> On Wed, Nov 9, 2022 at 4:34 AM Tim Krause < artma...@comcast.net> 
>>> wrote: 
>>>
>>> I just tripple checked...nope still not here. That's okay, I was going 
>>> to use the mill for suporting others. But, I don't think many were made. 
>>> It's all just water under the bridge. 
>>>
>>> Tim 
>>> On Nov 6, 2022, at 7:31 PM, bulk...@mmnet.com.au wrote: 
>>>
>>> Well holy crap Tim Ks mill must be sitting at his front door.
>>>
>>>  
>>>
>>> Bill
>>>
>>>  
>>>
>>> *From:* legacy-orna...@googlegroups.com  
>>> *On Behalf Of *Tim Ziegler
>>> *Sent:* Monday, 7 November 2022 2:14 PM
>>> *To:* legacy-orna...@googlegroups.com
>>> *Subject:* Re: Name question
>>>
>>>  
>>>
>>> Here you are Bill
>>>
>>> Kind Regards,
>>>
>>>  
>>>
>>> Timothy J. Ziegler
>>>
>>> Ziegler WoodWork & Specialty
>>>
>>> 14171 160th Ave.
>>>
>>> Foreston MN 56330
>>>
>>>  
>>>
>>> 320-294-5798 <(320)%20294-5798> shop
>>>
>>> 320-630-2243 <(320)%20630-2243> cell
>>>
>>>  
>>>
>>>  
>>>
>>> On Sun, Nov 6, 2022 at 9:10 PM  wrote:
>>>
>>> I have never seen a flying pig lol
>>>
>>>  
>>>
>>> Bill
>>>
>>>  
>>>
>>> *From:* 'Curt George' via Legacy Ornamental Mills <
>>> legacy-orna...@googlegroups.com> 
>>> *Sent:* Monday, 7 November 2022 1:31 PM
>>> *To:* legacy-orna...@googlegroups.com
>>> *Subject:* Re: Name question
>>>
>>>  
>>>
>>> Hello Mac.
>>>
>>>  
>>>
>>> YES! and No.
>>>
>>>  
>>>
>>> Yes Andy did promise Tim a mill for all the reasons you stated.  
>>>
>>>  
>>>
>>> And No. I have no idea when it will get to him?  (I'm sure it was an 
>>> Honest mistake, and it will arrive any day...) ;-p
>>>
>>>  
>>>
>>> C.A.G.
>>>
>>> On Sunday, November 6, 2022 at 09:18:38 PM EST, M.W.Foscue <
>>> mwfo...@earthlink.net> wrote: 
>>>
>>>  
>>>
>>>  
>>>
>>> At the risk of digging up old bones - isn't that the Mill that Legacy 
>>> was going to send Tim K. years ago - in appreciation for all that he had 
>>> done for the Legacy Mill community? 
>>>
>>> Mac
>>>
>>> --
>>> --
>>>
>>> -Original Message-
>>> From: 
>>> Sent: Nov 6, 2022 3:43 PM
>>> To: 
>>> Subject: RE: Name question
>>>
>>>  
>>>
>>> This is the evolution mill
>>>
>>> Bill
>>>
>>> *From:* legacy-orna...@googlegroups.com  
>>> *On Behalf Of *Dan Krager
>>> *Sent:* Monday, 7 November 2022 2:31 AM
>>> *To:* Legacy Ornamental Mills 
>>> *Subject:* Name question
>>>
>>>  
>>>
>>> I see several messages about an "Evolution" Legacy Mill.  I own what the 
>>> manual calls a "REVO" legacy mill, which the fine print spells out as short 
>>> for "...a *revolution*ary new design."  
>>>
>>>  
>>>
>>> So am I missing something here?
>>>
>>>  
>>>
>>> DanK
>>>
>>>  
>>>
>>> -- 
>>> You received this message because you are subscribed to the Google 
>>> Groups "Legacy Ornamental Mills" group.
>>> To unsubscribe from this group and stop receiving emails from it, send 
>>> an email to legacy-ornamental...@googlegroups.com.
>>> To view this discussion on the web visit 
>>> https://groups.google.com/d/msgid/legacy-ornamental-mills/680773f8-489e-49b8-8a9a-36c083bdd891n%40googlegroups.com
>>>  
>>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/680773f8-489e-49b8-8a9a-36c083bdd891n%40googlegroups.com?utm_medium=email&utm_sourc

Re: Name question

[Tim Ziegler]

Yup I'm with you Tim. I wouldn't dig it up either.
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Wed, Nov 9, 2022 at 7:35 AM Tim Krause  wrote:

> I'd like a small desktop cnc so I could help others. There is absolutely
> no reason to bug Andy! Like I said, it's water under the bridge.
> On Nov 9, 2022, at 5:25 AM, 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com> wrote:
>>
>> I cant help but wonder What If, We remind Andy on his promise?
>> Perhaps Legacy could make a Small CNC for Tim. (something that will fit,
>> under the kitchen table, when not in use. ) ;-p
>>
>> C.A.G.
>>
>> On Wednesday, November 9, 2022 at 06:45:08 AM EST, Tim Ziegler <
>> timjzieg...@gmail.com> wrote:
>>
>>
>> Yup pretty much all one can say at this point.
>> We all know they are big into CnC and that machine was the true
>> beginning of it I think. (though it would be nice to have one)
>>
>> Kind Regards,
>>
>> Timothy J. Ziegler
>> Ziegler WoodWork & Specialty
>> 14171 160th Ave.
>> Foreston MN 56330
>>
>> 320-294-5798 shop
>> 320-630-2243 cell
>>
>>
>> On Wed, Nov 9, 2022 at 4:34 AM Tim Krause < artmarb...@comcast.net>
>> wrote:
>>
>> I just tripple checked...nope still not here. That's okay, I was going to
>> use the mill for suporting others. But, I don't think many were made. It's
>> all just water under the bridge.
>>
>> Tim
>> On Nov 6, 2022, at 7:31 PM, bulke...@mmnet.com.au wrote:
>>
>> Well holy crap Tim Ks mill must be sitting at his front door.
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
>> *Sent:* Monday, 7 November 2022 2:14 PM
>> *To:* legacy-ornamental-mills@googlegroups.com
>> *Subject:* Re: Name question
>>
>>
>>
>> Here you are Bill
>>
>> Kind Regards,
>>
>>
>>
>> Timothy J. Ziegler
>>
>> Ziegler WoodWork & Specialty
>>
>> 14171 160th Ave.
>>
>> Foreston MN 56330
>>
>>
>>
>> 320-294-5798 shop
>>
>> 320-630-2243 cell
>>
>>
>>
>>
>>
>> On Sun, Nov 6, 2022 at 9:10 PM  wrote:
>>
>> I have never seen a flying pig lol
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* 'Curt George' via Legacy Ornamental Mills <
>> legacy-ornamental-mills@googlegroups.com>
>> *Sent:* Monday, 7 November 2022 1:31 PM
>> *To:* legacy-ornamental-mills@googlegroups.com
>> *Subject:* Re: Name question
>>
>>
>>
>> Hello Mac.
>>
>>
>>
>> YES! and No.
>>
>>
>>
>> Yes Andy did promise Tim a mill for all the reasons you stated.
>>
>>
>>
>> And No. I have no idea when it will get to him?  (I'm sure it was an
>> Honest mistake, and it will arrive any day...) ;-p
>>
>>
>>
>> C.A.G.
>>
>> On Sunday, November 6, 2022 at 09:18:38 PM EST, M.W.Foscue <
>> mwfos...@earthlink.net> wrote:
>>
>>
>>
>>
>>
>> At the risk of digging up old bones - isn't that the Mill that Legacy was
>> going to send Tim K. years ago - in appreciation for all that he had done
>> for the Legacy Mill community?
>>
>> Mac
>>
>> --
>> --
>>
>> -Original Message-
>> From: 
>> Sent: Nov 6, 2022 3:43 PM
>> To: 
>> Subject: RE: Name question
>>
>>
>>
>> This is the evolution mill
>>
>> Bill
>>
>> *From:* legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Dan Krager
>> *Sent:* Monday, 7 November 2022 2:31 AM
>> *To:* Legacy Ornamental Mills 
>> *Subject:* Name question
>>
>>
>>
>> I see several messages about an "Evolution" Legacy Mill.  I own what the
>> manual calls a "REVO" legacy mill, which the fine print spells out as short
>> for "...a *revolution*ary new design."
>>
>>
>>
>> So am I missing something here?
>>
>>
>>
>> DanK
>>
>>
>>
>> --
>> You received this message because you are subscribed to the Google G

Re: Name question

['Curt George' via Legacy Ornamental Mills]

 Welcome back JOE!
We have missed hearing form you.
YES the EVO was a awesome machine, (Despite all that was already said.) I think 
the Robin was even a better machine, (but it was a proto type only.)
The Name of the Game in life is to make a profit, So you can live and grow. 
Legacy made its decision on how they wanted there company go.  I have no 
problems with what they did.  Despite not liking it.
I am still hoping that One day, Legacy or someone else can/will pick up the 
manual line for Ornamental Mills again, even on a much smaller scale.I still 
have my HOPES and DREAMS. (we will see?) ;-)
Again Welcome back Joe.Looking forward to talking to you more latter.
Take care.
C.A.G.On Wednesday, November 9, 2022 at 09:48:09 AM EST, 'finu...@aol.com' 
via Legacy Ornamental Mills  wrote:  
 
 wow!... for all the "I wish I had one of those" guys out there, all it takes 
is money to obtain one of those Evo's... find someone who has one and offer a 
ridiculous amount of money... people are either complaining that there weren't 
enough machines to suit their needs or they are too expensive... Delta, 
Powermatic, and now Craftsman all discontinued supporting many machines that 
they made over the past years... it's a fact of business... if there are not a 
lot of people that want your product you stop making that product and move on 
to something else... if an ornamental mill was still that desireable, the 
machines that are still out in the wild would be selling for a lot more than 
they currently are... I just do not get the narrative that is constantly being 
presented here... let it go already... Joe B.

On Wednesday, November 9, 2022 at 8:35:09 AM UTC-5 Tim wrote:

I'd like a small desktop cnc so I could help others. There is absolutely no 
reason to bug Andy! Like I said, it's water under the bridge.On Nov 9, 2022, at 
5:25 AM, 'Curt George' via Legacy Ornamental Mills 
 wrote:
   I cant help but wonder What If, We remind Andy on his promise?   Perhaps 
Legacy could make a Small CNC for Tim. (something that will fit, under the 
kitchen table, when not in use. ) ;-p   
   C.A.G.   
 On Wednesday, November 9, 2022 at 06:45:08 AM EST, Tim Ziegler 
 wrote:   
   
  Yup pretty much all one can say at this point.   We all know they are big 
into CnC and that machine was the true beginning of it I think. (though it 
would be nice to have one)   
Kind Regards,  
   Timothy J. Ziegler   Ziegler WoodWork & Specialty   14171 160th Ave.   
Foreston MN 56330   
   320-294-5798 shop   320-630-2243 cell 
   
On Wed, Nov 9, 2022 at 4:34 AM Tim Krause < artma...@comcast.net> wrote: 
  
I just tripple checked...nope still not here. That's okay, I was going to 
use the mill for suporting others. But, I don't think many were made. It's all 
just water under the bridge. 
 
   Tim   On Nov 6, 2022, at 7:31 PM, bulk...@mmnet.com.au wrote: 
  
Well holy crap Tim Ks mill must be sitting at his front door.
 

 

 

 
 
 

 
Bill
 

 

 

 
 
 

  
From: legacy-orna...@googlegroups.com  On 
Behalf Of Tim Ziegler
Sent: Monday, 7 November 2022 2:14 PM
To: legacy-orna...@googlegroups.com
Subject: Re: Name question
 

 

  

 
 
  
Here you are Bill

 


Kind Regards,
 

  

 
 
   
Timothy J. Ziegler
 

   
Ziegler WoodWork & Specialty
 

   
14171 160th Ave.
 

   
Foreston MN 56330
 

   

 
 
   
320-294-5798 shop
 

   
320-630-2243 cell
 

 

 
 
  

 
 
   
On Sun, Nov 6, 2022 at 9:10 PM  wrote:
 

  

I have never seen a flying pig lol
 

 
 
 

 
Bill
 

 
 
 

   
From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Monday, 7 November 2022 1:31 PM
To: legacy-orna...@googlegroups.com
Subject: Re: Name question
 

   
 
 

   
Hello Mac.
 

   
 
 

   
YES! and No.
 

   
 
 

   
Yes Andy did promise Tim a mill for all the reasons you stated.  
 

   
 
 

   
And No. I have no idea when it will get to him?  (I'm sure it was an Honest 
mistake, and it will arrive any day...) ;-p
 

   
 
 

   
C.A.G.
 

  
On Sunday, November 6, 2022 at 09:18:38 PM EST, M.W.Foscue 
 wrote: 
 

   
 
 

   
 
 

 
At the risk of digging up old bones - isn't that the Mill that Legacy was going 
to send Tim K. years ago - in appreciation for all that he had done for the 
Legacy Mill community? 
 

 
Mac
 

   
-Original Message-
From: 
Sent: Nov 6, 2022 3:43 PM
To: 
Subject: RE: Name question
 

 
 
 

  
This is the evolution mill
 

 
Bill
 

  
From: legacy-orna...@googlegroups.com  On 
Behalf Of Dan Krager
Sent: Monday, 7 November 2022 2:31 AM
To: Legacy Ornamental Mills 
Subject: Name question
 

  
 
 

  
I see several messages about an "Evolution" Legacy Mill.  I own what the manual 
calls a "REVO" legacy mill, which the fine print spells out as short for "...a 
revolutionary new design."  
 

   
 
 

   
So am I missing something her

Re: Name question

['finu...@aol.com' via Legacy Ornamental Mills]

wow!... for all the "I wish I had one of those" guys out there, all it 
takes is money to obtain one of those Evo's... find someone who has one and 
offer a ridiculous amount of money... people are either complaining that 
there weren't enough machines to suit their needs or they are too 
expensive... Delta, Powermatic, and now Craftsman all discontinued 
supporting many machines that they made over the past years... it's a fact 
of business... if there are not a lot of people that want your product you 
stop making that product and move on to something else... if an ornamental 
mill was still that desireable, the machines that are still out in the wild 
would be selling for a lot more than they currently are... I just do not 
get the narrative that is constantly being presented here... let it go 
already... Joe B.

On Wednesday, November 9, 2022 at 8:35:09 AM UTC-5 Tim wrote:

> I'd like a small desktop cnc so I could help others. There is absolutely 
> no reason to bug Andy! Like I said, it's water under the bridge.
> On Nov 9, 2022, at 5:25 AM, 'Curt George' via Legacy Ornamental Mills <
> legacy-orna...@googlegroups.com> wrote:
>
>> I cant help but wonder What If, We remind Andy on his promise? 
>> Perhaps Legacy could make a Small CNC for Tim. (something that will fit, 
>> under the kitchen table, when not in use. ) ;-p 
>>
>> C.A.G. 
>>
>> On Wednesday, November 9, 2022 at 06:45:08 AM EST, Tim Ziegler <
>> timjz...@gmail.com> wrote: 
>>
>>
>> Yup pretty much all one can say at this point.  
>> We all know they are big into CnC and that machine was the true 
>> beginning of it I think. (though it would be nice to have one) 
>>
>> Kind Regards, 
>>
>> Timothy J. Ziegler 
>> Ziegler WoodWork & Specialty 
>> 14171 160th Ave. 
>> Foreston MN 56330 
>>
>> 320-294-5798 <(320)%20294-5798> shop 
>> 320-630-2243 <(320)%20630-2243> cell 
>>
>>
>> On Wed, Nov 9, 2022 at 4:34 AM Tim Krause < artma...@comcast.net> wrote: 
>>
>> I just tripple checked...nope still not here. That's okay, I was going to 
>> use the mill for suporting others. But, I don't think many were made. It's 
>> all just water under the bridge. 
>>
>> Tim 
>> On Nov 6, 2022, at 7:31 PM, bulk...@mmnet.com.au wrote: 
>>
>> Well holy crap Tim Ks mill must be sitting at his front door.
>>
>>  
>>
>> Bill
>>
>>  
>>
>> *From:* legacy-orna...@googlegroups.com  
>> *On Behalf Of *Tim Ziegler
>> *Sent:* Monday, 7 November 2022 2:14 PM
>> *To:* legacy-orna...@googlegroups.com
>> *Subject:* Re: Name question
>>
>>  
>>
>> Here you are Bill
>>
>> Kind Regards,
>>
>>  
>>
>> Timothy J. Ziegler
>>
>> Ziegler WoodWork & Specialty
>>
>> 14171 160th Ave.
>>
>> Foreston MN 56330
>>
>>  
>>
>> 320-294-5798 <(320)%20294-5798> shop
>>
>> 320-630-2243 <(320)%20630-2243> cell
>>
>>  
>>
>>  
>>
>> On Sun, Nov 6, 2022 at 9:10 PM  wrote:
>>
>> I have never seen a flying pig lol
>>
>>  
>>
>> Bill
>>
>>  
>>
>> *From:* 'Curt George' via Legacy Ornamental Mills <
>> legacy-orna...@googlegroups.com> 
>> *Sent:* Monday, 7 November 2022 1:31 PM
>> *To:* legacy-orna...@googlegroups.com
>> *Subject:* Re: Name question
>>
>>  
>>
>> Hello Mac.
>>
>>  
>>
>> YES! and No.
>>
>>  
>>
>> Yes Andy did promise Tim a mill for all the reasons you stated.  
>>
>>  
>>
>> And No. I have no idea when it will get to him?  (I'm sure it was an 
>> Honest mistake, and it will arrive any day...) ;-p
>>
>>  
>>
>> C.A.G.
>>
>> On Sunday, November 6, 2022 at 09:18:38 PM EST, M.W.Foscue <
>> mwfo...@earthlink.net> wrote: 
>>
>>  
>>
>>  
>>
>> At the risk of digging up old bones - isn't that the Mill that Legacy was 
>> going to send Tim K. years ago - in appreciation for all that he had done 
>> for the Legacy Mill community? 
>>
>> Mac
>>
>> --
>> --
>>
>> -Original Message-
>> From: 
>> Sent: Nov 6, 2022 3:43 PM
>> To: 
>> Subject: RE: Name question
>>
>>  
>>
>> This is the evolution mill
>>
>> Bill
>>
>> *From:* legacy-orna...@googlegroups.co

Re: Name question

[Tim Krause]

I'd like a small desktop cnc so I could help others. There is absolutely no 
reason to bug Andy! Like I said, it's water under the bridge.

On Nov 9, 2022, 5:25 AM, at 5:25 AM, 'Curt George' via Legacy Ornamental Mills 
 wrote:
>I cant help but wonder What If, We remind Andy on his promise?Perhaps
>Legacy could make a Small CNC for Tim. (something that will fit, under
>the kitchen table, when not in use. ) ;-p
>C.A.G.
>On Wednesday, November 9, 2022 at 06:45:08 AM EST, Tim Ziegler
> wrote:  
> 
>Yup pretty much all one can say at this point. We all know they are big
>into CnC and that machine was the true beginning of it I think. (though
>it would be nice to have one)
>Kind Regards,
>Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston
>MN 56330
>320-294-5798 shop320-630-2243 cell
>
>On Wed, Nov 9, 2022 at 4:34 AM Tim Krause 
>wrote:
>
>I just tripple checked...nope still not here. That's okay, I was going
>to use the mill for suporting others. But, I don't think many were
>made. It's all just water under the bridge.
>
>TimOn Nov 6, 2022, at 7:31 PM, bulke...@mmnet.com.au wrote:
>
>Well holy crap Tim Ks mill must be sitting at his front door.
>
>
>
>
>
>
>
> 
>
>
>
>Bill
>
>
>
>
>
>
>
> 
>
>
>
>From: legacy-ornamental-mills@googlegroups.com
> On Behalf Of Tim Ziegler
>Sent: Monday, 7 November 2022 2:14 PM
>To: legacy-ornamental-mills@googlegroups.com
>Subject: Re: Name question
>
>
>
>
>
>
>
> 
>
>Here you are Bill
>
>
>
>
>Kind Regards,
>
>
>
>
>
> 
>
>Timothy J. Ziegler
>
>
>
>Ziegler WoodWork & Specialty
>
>
>
>14171 160th Ave.
>
>
>
>Foreston MN 56330
>
>
>
>
>
> 
>
>320-294-5798 shop
>
>
>
>320-630-2243 cell
>
>
>
>
>
> 
>
>
>
> 
>
>On Sun, Nov 6, 2022 at 9:10 PM  wrote:
>
>
>
>
>I have never seen a flying pig lol
>
>
>
> 
>
>
>
>Bill
>
>
>
> 
>
>
>
>From: 'Curt George' via Legacy Ornamental Mills
> 
>Sent: Monday, 7 November 2022 1:31 PM
>To: legacy-ornamental-mills@googlegroups.com
>Subject: Re: Name question
>
>
>
> 
>
>
>
>Hello Mac.
>
>
>
> 
>
>
>
>YES! and No.
>
>
>
> 
>
>
>
>Yes Andy did promise Tim a mill for all the reasons you stated.  
>
>
>
> 
>
>
>
>And No. I have no idea when it will get to him?  (I'm sure it was an
>Honest mistake, and it will arrive any day...) ;-p
>
>
>
> 
>
>
>
>C.A.G.
>
>
>
>On Sunday, November 6, 2022 at 09:18:38 PM EST, M.W.Foscue
> wrote: 
>
>
>
> 
>
>
>
> 
>
>
>
>At the risk of digging up old bones - isn't that the Mill that Legacy
>was going to send Tim K. years ago - in appreciation for all that he
>had done for the Legacy Mill community? 
>
>
>
>Mac
>
>
>
>-Original Message-
>From: 
>Sent: Nov 6, 2022 3:43 PM
>To: 
>Subject: RE: Name question
>
>
>
> 
>
>
>
>This is the evolution mill
>
>
>
>Bill
>
>
>
>From: legacy-ornamental-mills@googlegroups.com
> On Behalf Of Dan Krager
>Sent: Monday, 7 November 2022 2:31 AM
>To: Legacy Ornamental Mills 
>Subject: Name question
>
>
>
> 
>
>
>
>I see several messages about an "Evolution" Legacy Mill.  I own what
>the manual calls a "REVO" legacy mill, which the fine print spells out
>as short for "...a revolutionary new design."  
>
>
>
> 
>
>
>
>So am I missing something here?
>
>
>
> 
>
>
>
>DanK
>
>
>
> 
>
>
>
>-- 
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>To view this discussion on the web visit
>https://groups.google.com/d/msgid/legacy-ornamental-mills/680773f8-489e-49b8-8a9a-36c083bdd891n%40googlegroups.com.
>
>
>
> 
>
>
>
>-- 
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>To view this discussion on the web visit
>https://groups.google.com/d/msgid/legacy-ornamental-mills/01d8f220%246b89fc30%24429df490%24%40mmnet.com.au.
>
>
>
&

Re: Name question

['Curt George' via Legacy Ornamental Mills]

 I cant help but wonder What If, We remind Andy on his promise?Perhaps Legacy 
could make a Small CNC for Tim. (something that will fit, under the kitchen 
table, when not in use. ) ;-p
C.A.G.
On Wednesday, November 9, 2022 at 06:45:08 AM EST, Tim Ziegler 
 wrote:  
 
 Yup pretty much all one can say at this point. We all know they are big into 
CnC and that machine was the true beginning of it I think. (though it would be 
nice to have one)
Kind Regards,
Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330
320-294-5798 shop320-630-2243 cell

On Wed, Nov 9, 2022 at 4:34 AM Tim Krause  wrote:

I just tripple checked...nope still not here. That's okay, I was going to use 
the mill for suporting others. But, I don't think many were made. It's all just 
water under the bridge.

TimOn Nov 6, 2022, at 7:31 PM, bulke...@mmnet.com.au wrote:

Well holy crap Tim Ks mill must be sitting at his front door.







 



Bill







 



From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Monday, 7 November 2022 2:14 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Name question







 

Here you are Bill




Kind Regards,





 

Timothy J. Ziegler



Ziegler WoodWork & Specialty



14171 160th Ave.



Foreston MN 56330





 

320-294-5798 shop



320-630-2243 cell





 



 

On Sun, Nov 6, 2022 at 9:10 PM  wrote:




I have never seen a flying pig lol



 



Bill



 



From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Monday, 7 November 2022 1:31 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Name question



 



Hello Mac.



 



YES! and No.



 



Yes Andy did promise Tim a mill for all the reasons you stated.  



 



And No. I have no idea when it will get to him?  (I'm sure it was an Honest 
mistake, and it will arrive any day...) ;-p



 



C.A.G.



On Sunday, November 6, 2022 at 09:18:38 PM EST, M.W.Foscue 
 wrote: 



 



 



At the risk of digging up old bones - isn't that the Mill that Legacy was going 
to send Tim K. years ago - in appreciation for all that he had done for the 
Legacy Mill community? 



Mac



-Original Message-
From: 
Sent: Nov 6, 2022 3:43 PM
To: 
Subject: RE: Name question



 



This is the evolution mill



Bill



From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Dan Krager
Sent: Monday, 7 November 2022 2:31 AM
To: Legacy Ornamental Mills 
Subject: Name question



 



I see several messages about an "Evolution" Legacy Mill.  I own what the manual 
calls a "REVO" legacy mill, which the fine print spells out as short for "...a 
revolutionary new design."  



 



So am I missing something here?



 



DanK



 



-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/680773f8-489e-49b8-8a9a-36c083bdd891n%40googlegroups.com.



 



-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d8f220%246b89fc30%24429df490%24%40mmnet.com.au.



 



-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/694364a9-aad1-9def-294d-846848868aad%40earthlink.net.



-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1163238568.302065.1667788257808%40mail.yahoo.com.



-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/005801d8f256%2476a36a80%2463ea3f80%24%40mmnet.com.au.




-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mi

Re: Name question

[Tim Ziegler]

Yup pretty much all one can say at this point.
We all know they are big into CnC and that machine was the true
beginning of it I think. (though it would be nice to have one)

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Wed, Nov 9, 2022 at 4:34 AM Tim Krause  wrote:

> I just tripple checked...nope still not here. That's okay, I was going to
> use the mill for suporting others. But, I don't think many were made. It's
> all just water under the bridge.
>
> Tim
> On Nov 6, 2022, at 7:31 PM, bulke...@mmnet.com.au wrote:
>>
>> Well holy crap Tim Ks mill must be sitting at his front door.
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
>> *Sent:* Monday, 7 November 2022 2:14 PM
>> *To:* legacy-ornamental-mills@googlegroups.com
>> *Subject:* Re: Name question
>>
>>
>>
>> Here you are Bill
>>
>> Kind Regards,
>>
>>
>>
>> Timothy J. Ziegler
>>
>> Ziegler WoodWork & Specialty
>>
>> 14171 160th Ave.
>>
>> Foreston MN 56330
>>
>>
>>
>> 320-294-5798 shop
>>
>> 320-630-2243 cell
>>
>>
>>
>>
>>
>> On Sun, Nov 6, 2022 at 9:10 PM  wrote:
>>
>> I have never seen a flying pig lol
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* 'Curt George' via Legacy Ornamental Mills <
>> legacy-ornamental-mills@googlegroups.com>
>> *Sent:* Monday, 7 November 2022 1:31 PM
>> *To:* legacy-ornamental-mills@googlegroups.com
>> *Subject:* Re: Name question
>>
>>
>>
>> Hello Mac.
>>
>>
>>
>> YES! and No.
>>
>>
>>
>> Yes Andy did promise Tim a mill for all the reasons you stated.
>>
>>
>>
>> And No. I have no idea when it will get to him?  (I'm sure it was an
>> Honest mistake, and it will arrive any day...) ;-p
>>
>>
>>
>> C.A.G.
>>
>> On Sunday, November 6, 2022 at 09:18:38 PM EST, M.W.Foscue <
>> mwfos...@earthlink.net> wrote:
>>
>>
>>
>>
>>
>> At the risk of digging up old bones - isn't that the Mill that Legacy was
>> going to send Tim K. years ago - in appreciation for all that he had done
>> for the Legacy Mill community?
>>
>> Mac
>>
>> --
>> --
>>
>> -Original Message-
>> From: 
>> Sent: Nov 6, 2022 3:43 PM
>> To: 
>> Subject: RE: Name question
>>
>>
>>
>> This is the evolution mill
>>
>> Bill
>>
>> *From:* legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Dan Krager
>> *Sent:* Monday, 7 November 2022 2:31 AM
>> *To:* Legacy Ornamental Mills 
>> *Subject:* Name question
>>
>>
>>
>> I see several messages about an "Evolution" Legacy Mill.  I own what the
>> manual calls a "REVO" legacy mill, which the fine print spells out as short
>> for "...a *revolution*ary new design."
>>
>>
>>
>> So am I missing something here?
>>
>>
>>
>> DanK
>>
>>
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/680773f8-489e-49b8-8a9a-36c083bdd891n%40googlegroups.com
>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/680773f8-489e-49b8-8a9a-36c083bdd891n%40googlegroups.com?utm_medium=email&utm_source=footer>
>> .
>>
>>
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/01d8f220%246b89fc30%24429df490%24%40mmnet.com.au
>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/01d8f220

RE: Name question

[bulkeley]

Yes it is

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Krause
Sent: Wednesday, 9 November 2022 9:34 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Name question

 

I just tripple checked...nope still not here. That's okay, I was going to use 
the mill for suporting others. But, I don't think many were made. It's all just 
water under the bridge.

Tim

On Nov 6, 2022, at 7:31 PM, bulke...@mmnet.com.au 
<mailto:bulke...@mmnet.com.au>  wrote:

Well holy crap Tim Ks mill must be sitting at his front door.

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Monday, 7 November 2022 2:14 PM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: Re: Name question

 

Here you are Bill


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Sun, Nov 6, 2022 at 9:10 PM mailto:bulke...@mmnet.com.au> > wrote:

I have never seen a flying pig lol

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > 
Sent: Monday, 7 November 2022 1:31 PM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: Re: Name question

 

Hello Mac.

 

YES! and No.

 

Yes Andy did promise Tim a mill for all the reasons you stated.  

 

And No. I have no idea when it will get to him?  (I'm sure it was an Honest 
mistake, and it will arrive any day...) ;-p

 

C.A.G.

On Sunday, November 6, 2022 at 09:18:38 PM EST, M.W.Foscue 
mailto:mwfos...@earthlink.net> > wrote: 

 

 

At the risk of digging up old bones - isn't that the Mill that Legacy was going 
to send Tim K. years ago - in appreciation for all that he had done for the 
Legacy Mill community? 

Mac


  _  


  _  


-Original Message-
From: mailto:legacy-ornamental-mills@googlegroups.com> >
Sent: Nov 6, 2022 3:43 PM
To: mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: RE: Name question

 

This is the evolution mill

Bill

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Dan Krager
Sent: Monday, 7 November 2022 2:31 AM
To: Legacy Ornamental Mills mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Name question

 

I see several messages about an "Evolution" Legacy Mill.  I own what the manual 
calls a "REVO" legacy mill, which the fine print spells out as short for "...a 
revolutionary new design."  

 

So am I missing something here?

 

DanK

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/680773f8-489e-49b8-8a9a-36c083bdd891n%40googlegroups.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/680773f8-489e-49b8-8a9a-36c083bdd891n%40googlegroups.com?utm_medium=email&utm_source=footer>
 .

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d8f220%246b89fc30%24429df490%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/01d8f220%246b89fc30%24429df490%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
 .

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/694364a9-aad1-9def-294d-846848868aad%40earthlink.net
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/694364a9-aad1-9def-294d-846848868aad%40earthlink.net?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the G

RE: Name question

[Tim Krause]

I just tripple checked...nope still not here. That's okay, I was going to use 
the mill for suporting others. But, I don't think many were made. It's all just 
water under the bridge.

Tim

On Nov 6, 2022, 7:31 PM, at 7:31 PM, bulke...@mmnet.com.au wrote:
>Well holy crap Tim Ks mill must be sitting at his front door.
>
> 
>
>Bill
>
> 
>
>From: legacy-ornamental-mills@googlegroups.com
> On Behalf Of Tim Ziegler
>Sent: Monday, 7 November 2022 2:14 PM
>To: legacy-ornamental-mills@googlegroups.com
>Subject: Re: Name question
>
> 
>
>Here you are Bill
>
>
>Kind Regards,
>
> 
>
>Timothy J. Ziegler
>
>Ziegler WoodWork & Specialty
>
>14171 160th Ave.
>
>Foreston MN 56330
>
> 
>
>320-294-5798 shop
>
>320-630-2243 cell
>
> 
>
> 
>
>On Sun, Nov 6, 2022 at 9:10 PM <mailto:bulke...@mmnet.com.au> > wrote:
>
>I have never seen a flying pig lol
>
> 
>
>Bill
>
> 
>
>From: 'Curt George' via Legacy Ornamental Mills
><mailto:legacy-ornamental-mills@googlegroups.com> > 
>Sent: Monday, 7 November 2022 1:31 PM
>To: legacy-ornamental-mills@googlegroups.com
><mailto:legacy-ornamental-mills@googlegroups.com> 
>Subject: Re: Name question
>
> 
>
>Hello Mac.
>
> 
>
>YES! and No.
>
> 
>
>Yes Andy did promise Tim a mill for all the reasons you stated.  
>
> 
>
>And No. I have no idea when it will get to him?  (I'm sure it was an
>Honest mistake, and it will arrive any day...) ;-p
>
> 
>
>C.A.G.
>
>On Sunday, November 6, 2022 at 09:18:38 PM EST, M.W.Foscue
>mailto:mwfos...@earthlink.net> > wrote: 
>
> 
>
> 
>
>At the risk of digging up old bones - isn't that the Mill that Legacy
>was going to send Tim K. years ago - in appreciation for all that he
>had done for the Legacy Mill community? 
>
>Mac
>
>
>  _  
>
>
>  _  
>
>
>-Original Message-
>From: <mailto:legacy-ornamental-mills@googlegroups.com> >
>Sent: Nov 6, 2022 3:43 PM
>To: <mailto:legacy-ornamental-mills@googlegroups.com> >
>Subject: RE: Name question
>
> 
>
>This is the evolution mill
>
>Bill
>
>From: legacy-ornamental-mills@googlegroups.com
><mailto:legacy-ornamental-mills@googlegroups.com> 
><mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Dan
>Krager
>Sent: Monday, 7 November 2022 2:31 AM
>To: Legacy Ornamental Mills <mailto:legacy-ornamental-mills@googlegroups.com> >
>Subject: Name question
>
> 
>
>I see several messages about an "Evolution" Legacy Mill.  I own what
>the manual calls a "REVO" legacy mill, which the fine print spells out
>as short for "...a revolutionary new design."  
>
> 
>
>So am I missing something here?
>
> 
>
>DanK
>
> 
>
>-- 
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>To view this discussion on the web visit
>https://groups.google.com/d/msgid/legacy-ornamental-mills/680773f8-489e-49b8-8a9a-36c083bdd891n%40googlegroups.com
><https://groups.google.com/d/msgid/legacy-ornamental-mills/680773f8-489e-49b8-8a9a-36c083bdd891n%40googlegroups.com?utm_medium=email&utm_source=footer>
>.
>
> 
>
>-- 
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com
><mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
>To view this discussion on the web visit
>https://groups.google.com/d/msgid/legacy-ornamental-mills/01d8f220%246b89fc30%24429df490%24%40mmnet.com.au
><https://groups.google.com/d/msgid/legacy-ornamental-mills/01d8f220%246b89fc30%24429df490%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
>.
>
> 
>
>-- 
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com
><mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
>To view this discussion on the web visit
>https://groups.google.com/d/msgid/legacy-ornamental-mills/694364a9-aad1-9def-294d-846848868aad%40earthlink.net
><https://groups.google.com/d/msgid/legacy-ornament

Re: Name question

[Tim Ziegler]

lol thats not what we've read and heard Bill lol.
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Nov 7, 2022 at 5:08 PM  wrote:

> Sorry guys but the only time pigs fly in Australia is when they bounce off
> your bulbar 😊 same as the roos do
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Tuesday, 8 November 2022 3:29 AM
> *To:* LOM Group 
> *Subject:* Re: Name question
>
>
>
> Yeah I guess you'd be right on that one Mike. Lol
>
>
>
> Tim
>
>
>
> On Mon, Nov 7, 2022, 10:18 AM Okla Mike (Liltwisted) <
> legacym...@iglide.net> wrote:
>
> I'm sure the act of flying is a pretty scary endeavor to pigs as well.  So
> I am quite sure the pucker factor in flight will be sufficient to keep us
> unfertilized on the ground.
>
> On 11/7/2022 9:52 AM, 'Denson Ingram' via Legacy Ornamental Mills wrote:
>
> I guess not a good idea to be under a flock when flying overhead?
>
> Denson
>
> Sent from Denson's iPhone
>
>
>
> On Nov 7, 2022, at 6:25 AM, Tim Ziegler 
>  wrote:
>
> 
>
> Yeah and you should hear the commotion when a flock fly's over and you
> have tall trees. They have a hard
>
> time perching so usually they ground land and come to a rolling stop about
> 50 yards from where they touch (crash)
>
> down. that actually helps keep the meat tender too.
>
>
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Sun, Nov 6, 2022 at 11:37 PM M.W.Foscue  wrote:
>
> Bill,
>
> In case you don't know:  The University of South Carolina spent megabuck$
> on genetic research on pigs; necessary because the S. Carolina's State
> Protein is pork.  They LOVE their slow-cooked/smoked southen-style BBQ.
> The realized that pigs grow faster and remain fairly lean when they live in
> more mild temps.  To get the most growth from a pig in shortest time, they
> wee able to produce a bloodline that could fly.  The idea being they could
> live up north in the US Summer and migrate back to S. Carolina over the
> winter.
>
> So far, it has been going very well.
>
> What you saw in the photo is one of the early youth that is practicing
> flight - and will migrate south in a few days to the Anderson, SC area.
>
> Mac
> --
> --
>
> -Original Message-
> From: 
> Sent: Nov 6, 2022 10:14 PM
> To: 
> Subject: Re: Name question
>
>
>
> Here you are Bill
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
> On Sun, Nov 6, 2022 at 9:10 PM  wrote:
>
> I have never seen a flying pig lol
>
>
>
> Bill
>
>
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com>
> *Sent:* Monday, 7 November 2022 1:31 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Name question
>
>
>
> Hello Mac.
>
>
>
> YES! and No.
>
>
>
> Yes Andy did promise Tim a mill for all the reasons you stated.
>
>
>
> And No. I have no idea when it will get to him?  (I'm sure it was an
> Honest mistake, and it will arrive any day...) ;-p
>
>
>
> C.A.G.
>
> On Sunday, November 6, 2022 at 09:18:38 PM EST, M.W.Foscue <
> mwfos...@earthlink.net> wrote:
>
>
>
>
>
> At the risk of digging up old bones - isn't that the Mill that Legacy was
> going to send Tim K. years ago - in appreciation for all that he had done
> for the Legacy Mill community?
>
> Mac
> --
> --
>
> -Original Message-
> From: 
> Sent: Nov 6, 2022 3:43 PM
> To: 
> Subject: RE: Name question
>
>
>
> This is the evolution mill
>
> Bill
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Dan Krager
> *Sent:* Monday, 7 November 2022 2:31 AM
> *To:* Legacy Ornamental Mills 
> *Subject:* Name question
>
>
>
> I see several messages about an "Evolution" Legacy Mill.  I own what the
> manual calls a "REVO" leg

RE: Name question

[M.W.Foscue]

Ha ha!!
-Original Message-
From: 
Sent: Nov 7, 2022 6:08 PM
To: 
Subject: RE: Name question

Sorry guys but the only time pigs fly in Australia is when they bounce off your 
bulbar 😊 same as the roos do
 
Bill
 
From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Tuesday, 8 November 2022 3:29 AM
To: LOM Group 
Subject: Re: Name question


Yeah I guess you'd be right on that one Mike. Lol


Tim



On Mon, Nov 7, 2022, 10:18 AM Okla Mike (Liltwisted) mailto:legacym...@iglide.net)> wrote:

I'm sure the act of flying is a pretty scary endeavor to pigs as well.  So I am 
quite sure the pucker factor in flight will be sufficient to keep us 
unfertilized on the ground. 
On 11/7/2022 9:52 AM, 'Denson Ingram' via Legacy Ornamental Mills wrote:

I guess not a good idea to be under a flock when flying overhead?
Denson
Sent from Denson's iPhone




On Nov 7, 2022, at 6:25 AM, Tim Ziegler  
(mailto:timjzieg...@gmail.com) wrote:


Yeah and you should hear the commotion when a flock fly's over and you have 
tall trees. They have a hard
time perching so usually they ground land and come to a rolling stop about 50 
yards from where they touch (crash)

down. that actually helps keep the meat tender too.




Kind Regards,


Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330



320-294-5798 shop

320-630-2243 cell








On Sun, Nov 6, 2022 at 11:37 PM M.W.Foscue mailto:mwfos...@earthlink.net)> wrote:

Bill,
In case you don't know:  The University of South Carolina spent megabuck$ on 
genetic research on pigs; necessary because the S. Carolina's State Protein is 
pork.  They LOVE their slow-cooked/smoked southen-style BBQ.  The realized that 
pigs grow faster and remain fairly lean when they live in more mild temps.  To 
get the most growth from a pig in shortest time, they wee able to produce a 
bloodline that could fly.  The idea being they could live up north in the US 
Summer and migrate back to S. Carolina over the winter.
So far, it has been going very well.
What you saw in the photo is one of the early youth that is practicing flight - 
and will migrate south in a few days to the Anderson, SC area.
Mac



-Original Message-
From: mailto:legacy-ornamental-mills@googlegroups.com)>
Sent: Nov 6, 2022 10:14 PM
To: mailto:legacy-ornamental-mills@googlegroups.com)>
Subject: Re: Name question

Here you are Bill
Kind Regards,


Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330



320-294-5798 shop

320-630-2243 cell






On Sun, Nov 6, 2022 at 9:10 PM mailto:bulke...@mmnet.com.au)> wrote:

I have never seen a flying pig lol
 
Bill
 
From: 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com)> 
Sent: Monday, 7 November 2022 1:31 PM
To: legacy-ornamental-mills@googlegroups.com 
(mailto:legacy-ornamental-mills@googlegroups.com)
Subject: Re: Name question



Hello Mac.

 

YES! and No.

 

Yes Andy did promise Tim a mill for all the reasons you stated.  

 

And No. I have no idea when it will get to him?  (I'm sure it was an Honest 
mistake, and it will arrive any day...) ;-p

 

C.A.G.


On Sunday, November 6, 2022 at 09:18:38 PM EST, M.W.Foscue 
mailto:mwfos...@earthlink.net)> wrote: 

 

 

At the risk of digging up old bones - isn't that the Mill that Legacy was going 
to send Tim K. years ago - in appreciation for all that he had done for the 
Legacy Mill community?
Mac



-Original Message-
From: mailto:legacy-ornamental-mills@googlegroups.com)>
Sent: Nov 6, 2022 3:43 PM
To: mailto:legacy-ornamental-mills@googlegroups.com)>
Subject: RE: Name question
 
This is the evolution mill
Bill
From: legacy-ornamental-mills@googlegroups.com 
(mailto:legacy-ornamental-mills@googlegroups.com) 
mailto:legacy-ornamental-mills@googlegroups.com)> On Behalf Of Dan Krager
Sent: Monday, 7 November 2022 2:31 AM
To: Legacy Ornamental Mills mailto:legacy-ornamental-mills@googlegroups.com)>
Subject: Name question

 
I see several messages about an "Evolution" Legacy Mill.  I own what the manual 
calls a "REVO" legacy mill, which the fine print spells out as short for "...a 
revolutionary new design."  

 

So am I missing something here?

 

DanK













-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
(mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com).
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLG_oP%3DGX0moY%2BhwuwyH_jv6768PwBDHcc2bHkMrhpz1%3Dg%40mail.gmail.com.


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mill

RE: Name question

[bulkeley]

Sorry guys but the only time pigs fly in Australia is when they bounce off your 
bulbar 😊 same as the roos do

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Tuesday, 8 November 2022 3:29 AM
To: LOM Group 
Subject: Re: Name question

 

Yeah I guess you'd be right on that one Mike. Lol

 

Tim

 

On Mon, Nov 7, 2022, 10:18 AM Okla Mike (Liltwisted) mailto:legacym...@iglide.net> > wrote:

I'm sure the act of flying is a pretty scary endeavor to pigs as well.  So I am 
quite sure the pucker factor in flight will be sufficient to keep us 
unfertilized on the ground. 

On 11/7/2022 9:52 AM, 'Denson Ingram' via Legacy Ornamental Mills wrote:

I guess not a good idea to be under a flock when flying overhead? 

Denson

Sent from Denson's iPhone





On Nov 7, 2022, at 6:25 AM, Tim Ziegler  <mailto:timjzieg...@gmail.com> 
 wrote:

 

Yeah and you should hear the commotion when a flock fly's over and you have 
tall trees. They have a hard 

time perching so usually they ground land and come to a rolling stop about 50 
yards from where they touch (crash)

down. that actually helps keep the meat tender too.

 




Kind Regards, 

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Sun, Nov 6, 2022 at 11:37 PM M.W.Foscue mailto:mwfos...@earthlink.net> > wrote:

Bill,

In case you don't know:  The University of South Carolina spent megabuck$ on 
genetic research on pigs; necessary because the S. Carolina's State Protein is 
pork.  They LOVE their slow-cooked/smoked southen-style BBQ.  The realized that 
pigs grow faster and remain fairly lean when they live in more mild temps.  To 
get the most growth from a pig in shortest time, they wee able to produce a 
bloodline that could fly.  The idea being they could live up north in the US 
Summer and migrate back to S. Carolina over the winter.

So far, it has been going very well.

What you saw in the photo is one of the early youth that is practicing flight - 
and will migrate south in a few days to the Anderson, SC area.

Mac

  _  

  _  

-Original Message-
From: mailto:legacy-ornamental-mills@googlegroups.com> >
Sent: Nov 6, 2022 10:14 PM
To: mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Re: Name question

 

Here you are Bill


Kind Regards, 

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

On Sun, Nov 6, 2022 at 9:10 PM mailto:bulke...@mmnet.com.au> > wrote:

I have never seen a flying pig lol

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > 
Sent: Monday, 7 November 2022 1:31 PM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: Re: Name question

 

Hello Mac.

 

YES! and No.

 

Yes Andy did promise Tim a mill for all the reasons you stated.  

 

And No. I have no idea when it will get to him?  (I'm sure it was an Honest 
mistake, and it will arrive any day...) ;-p

 

C.A.G.

On Sunday, November 6, 2022 at 09:18:38 PM EST, M.W.Foscue 
mailto:mwfos...@earthlink.net> > wrote: 

 

 

At the risk of digging up old bones - isn't that the Mill that Legacy was going 
to send Tim K. years ago - in appreciation for all that he had done for the 
Legacy Mill community? 

Mac

  _  

  _  

-Original Message-
From: mailto:legacy-ornamental-mills@googlegroups.com> >
Sent: Nov 6, 2022 3:43 PM
To: mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: RE: Name question

 

This is the evolution mill

Bill

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Dan Krager
Sent: Monday, 7 November 2022 2:31 AM
To: Legacy Ornamental Mills mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Name question

 

I see several messages about an "Evolution" Legacy Mill.  I own what the manual 
calls a "REVO" legacy mill, which the fine print spells out as short for "...a 
revolutionary new design."  

 

So am I missing something here?

 

DanK

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLG_oP%3DGX0moY%2BhwuwyH_jv6768PwBDHcc2bHkMrhpz1%3Dg%40mail.gmail.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/

Re: Name question

['Denson Ingram' via Legacy Ornamental Mills]

Good observation Mike.
Thanks lol
Denson

Sent from Denson's iPhone

> On Nov 7, 2022, at 10:45 AM, Okla Mike (Liltwisted)  
> wrote:
> 
> 
> I'm sure the act of flying is a pretty scary endeavor to pigs as well.  So I 
> am quite sure the pucker factor in flight will be sufficient to keep us 
> unfertilized on the ground. 
> 
> On 11/7/2022 9:52 AM, 'Denson Ingram' via Legacy Ornamental Mills wrote:
>> I guess not a good idea to be under a flock when flying overhead?
>> Denson
>> 
>> Sent from Denson's iPhone
>> 
>>> On Nov 7, 2022, at 6:25 AM, Tim Ziegler  wrote:
>>> 
>>> 
>>> Yeah and you should hear the commotion when a flock fly's over and you have 
>>> tall trees. They have a hard
>>> time perching so usually they ground land and come to a rolling stop about 
>>> 50 yards from where they touch (crash)
>>> down. that actually helps keep the meat tender too.
>>> 
>>> 
>>> Kind Regards,
>>> 
>>> Timothy J. Ziegler
>>> Ziegler WoodWork & Specialty
>>> 14171 160th Ave.
>>> Foreston MN 56330
>>> 
>>> 320-294-5798 shop
>>> 320-630-2243 cell
>>> 
>>> 
>>> On Sun, Nov 6, 2022 at 11:37 PM M.W.Foscue  wrote:
>>>> Bill,
>>>> In case you don't know:  The University of South Carolina spent megabuck$ 
>>>> on genetic research on pigs; necessary because the S. Carolina's State 
>>>> Protein is pork.  They LOVE their slow-cooked/smoked southen-style BBQ.  
>>>> The realized that pigs grow faster and remain fairly lean when they live 
>>>> in more mild temps.  To get the most growth from a pig in shortest time, 
>>>> they wee able to produce a bloodline that could fly.  The idea being they 
>>>> could live up north in the US Summer and migrate back to S. Carolina over 
>>>> the winter.
>>>> So far, it has been going very well.
>>>> What you saw in the photo is one of the early youth that is practicing 
>>>> flight - and will migrate south in a few days to the Anderson, SC area.
>>>> Mac
>>>> -Original Message-
>>>> From: 
>>>> Sent: Nov 6, 2022 10:14 PM
>>>> To: 
>>>> Subject: Re: Name question
>>>> 
>>>>  
>>>> Here you are Bill
>>>> Kind Regards,
>>>>  
>>>> Timothy J. Ziegler
>>>> Ziegler WoodWork & Specialty
>>>> 14171 160th Ave.
>>>> Foreston MN 56330
>>>>  
>>>> 320-294-5798 shop
>>>> 320-630-2243 cell
>>>> 
>>>> On Sun, Nov 6, 2022 at 9:10 PM  wrote:
>>>>> I have never seen a flying pig lol
>>>>> 
>>>>>  
>>>>> 
>>>>> Bill
>>>>> 
>>>>>  
>>>>> 
>>>>> From: 'Curt George' via Legacy Ornamental Mills 
>>>>>  
>>>>> Sent: Monday, 7 November 2022 1:31 PM
>>>>> To: legacy-ornamental-mills@googlegroups.com
>>>>> Subject: Re: Name question
>>>>> 
>>>>>  
>>>>> 
>>>>> Hello Mac.
>>>>> 
>>>>>  
>>>>> 
>>>>> YES! and No.
>>>>> 
>>>>>  
>>>>> 
>>>>> Yes Andy did promise Tim a mill for all the reasons you stated.  
>>>>> 
>>>>>  
>>>>> 
>>>>> And No. I have no idea when it will get to him?  (I'm sure it was an 
>>>>> Honest mistake, and it will arrive any day...) ;-p
>>>>> 
>>>>>  
>>>>> 
>>>>> C.A.G.
>>>>> 
>>>>> On Sunday, November 6, 2022 at 09:18:38 PM EST, M.W.Foscue 
>>>>>  wrote:
>>>>> 
>>>>>  
>>>>> 
>>>>>  
>>>>> 
>>>>> At the risk of digging up old bones - isn't that the Mill that Legacy was 
>>>>> going to send Tim K. years ago - in appreciation for all that he had done 
>>>>> for the Legacy Mill community?
>>>>> Mac
>>>>> -Original Message-
>>>>> From: 
>>>>> Sent: Nov 6, 2022 3:43 PM
>>>>> To: 
>>>>> Subject: RE: Name question
>>>>> 
>>>>>  
>>>>> This is the evolution mill
>>>>> 
>&g

Re: Name question

[Tim Ziegler]

Yeah I guess you'd be right on that one Mike. Lol

Tim

On Mon, Nov 7, 2022, 10:18 AM Okla Mike (Liltwisted) 
wrote:

> I'm sure the act of flying is a pretty scary endeavor to pigs as well.  So
> I am quite sure the pucker factor in flight will be sufficient to keep us
> unfertilized on the ground.
> On 11/7/2022 9:52 AM, 'Denson Ingram' via Legacy Ornamental Mills wrote:
>
> I guess not a good idea to be under a flock when flying overhead?
> Denson
>
> Sent from Denson's iPhone
>
> On Nov 7, 2022, at 6:25 AM, Tim Ziegler 
>  wrote:
>
> 
> Yeah and you should hear the commotion when a flock fly's over and you
> have tall trees. They have a hard
> time perching so usually they ground land and come to a rolling stop about
> 50 yards from where they touch (crash)
> down. that actually helps keep the meat tender too.
>
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
> On Sun, Nov 6, 2022 at 11:37 PM M.W.Foscue  wrote:
>
>> Bill,
>>
>> In case you don't know:  The University of South Carolina spent megabuck$
>> on genetic research on pigs; necessary because the S. Carolina's State
>> Protein is pork.  They LOVE their slow-cooked/smoked southen-style BBQ.
>> The realized that pigs grow faster and remain fairly lean when they live in
>> more mild temps.  To get the most growth from a pig in shortest time, they
>> wee able to produce a bloodline that could fly.  The idea being they could
>> live up north in the US Summer and migrate back to S. Carolina over the
>> winter.
>>
>> So far, it has been going very well.
>>
>> What you saw in the photo is one of the early youth that is practicing
>> flight - and will migrate south in a few days to the Anderson, SC area.
>>
>> Mac
>> --
>> --
>>
>> -Original Message-
>> From: 
>> Sent: Nov 6, 2022 10:14 PM
>> To: 
>> Subject: Re: Name question
>>
>>
>> Here you are Bill
>> Kind Regards,
>>
>> Timothy J. Ziegler
>> Ziegler WoodWork & Specialty
>> 14171 160th Ave.
>> Foreston MN 56330
>>
>> 320-294-5798 shop
>> 320-630-2243 cell
>>
>> On Sun, Nov 6, 2022 at 9:10 PM  wrote:
>>
>>> I have never seen a flying pig lol
>>>
>>>
>>>
>>> Bill
>>>
>>>
>>>
>>> *From:* 'Curt George' via Legacy Ornamental Mills <
>>> legacy-ornamental-mills@googlegroups.com>
>>> *Sent:* Monday, 7 November 2022 1:31 PM
>>> *To:* legacy-ornamental-mills@googlegroups.com
>>> *Subject:* Re: Name question
>>>
>>>
>>>
>>> Hello Mac.
>>>
>>>
>>>
>>> YES! and No.
>>>
>>>
>>>
>>> Yes Andy did promise Tim a mill for all the reasons you stated.
>>>
>>>
>>>
>>> And No. I have no idea when it will get to him?  (I'm sure it was an
>>> Honest mistake, and it will arrive any day...) ;-p
>>>
>>>
>>>
>>> C.A.G.
>>>
>>> On Sunday, November 6, 2022 at 09:18:38 PM EST, M.W.Foscue <
>>> mwfos...@earthlink.net> wrote:
>>>
>>>
>>>
>>>
>>>
>>> At the risk of digging up old bones - isn't that the Mill that Legacy
>>> was going to send Tim K. years ago - in appreciation for all that he had
>>> done for the Legacy Mill community?
>>>
>>> Mac
>>> --
>>> --
>>>
>>> -Original Message-
>>> From: 
>>> Sent: Nov 6, 2022 3:43 PM
>>> To: 
>>> Subject: RE: Name question
>>>
>>>
>>>
>>> This is the evolution mill
>>>
>>> Bill
>>>
>>> *From:* legacy-ornamental-mills@googlegroups.com <
>>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Dan Krager
>>> *Sent:* Monday, 7 November 2022 2:31 AM
>>> *To:* Legacy Ornamental Mills 
>>> *Subject:* Name question
>>>
>>>
>>>
>>> I see several messages about an "Evolution" Legacy Mill.  I own what the
>>> manual calls a "REVO" legacy mill, which the fine print spells out as short
>>> for "...a *revolution*ary new design."
>>>
>>>
>>>
&g

Re: Name question

[Tim Ziegler]

lol exactly, have an umbrella handy too.
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Nov 7, 2022 at 9:53 AM 'Denson Ingram' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> I guess not a good idea to be under a flock when flying overhead?
> Denson
>
> Sent from Denson's iPhone
>
> On Nov 7, 2022, at 6:25 AM, Tim Ziegler  wrote:
>
> 
> Yeah and you should hear the commotion when a flock fly's over and you
> have tall trees. They have a hard
> time perching so usually they ground land and come to a rolling stop about
> 50 yards from where they touch (crash)
> down. that actually helps keep the meat tender too.
>
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
> On Sun, Nov 6, 2022 at 11:37 PM M.W.Foscue  wrote:
>
>> Bill,
>>
>> In case you don't know:  The University of South Carolina spent megabuck$
>> on genetic research on pigs; necessary because the S. Carolina's State
>> Protein is pork.  They LOVE their slow-cooked/smoked southen-style BBQ.
>> The realized that pigs grow faster and remain fairly lean when they live in
>> more mild temps.  To get the most growth from a pig in shortest time, they
>> wee able to produce a bloodline that could fly.  The idea being they could
>> live up north in the US Summer and migrate back to S. Carolina over the
>> winter.
>>
>> So far, it has been going very well.
>>
>> What you saw in the photo is one of the early youth that is practicing
>> flight - and will migrate south in a few days to the Anderson, SC area.
>>
>> Mac
>> --
>> --
>>
>> -Original Message-
>> From: 
>> Sent: Nov 6, 2022 10:14 PM
>> To: 
>> Subject: Re: Name question
>>
>>
>> Here you are Bill
>> Kind Regards,
>>
>> Timothy J. Ziegler
>> Ziegler WoodWork & Specialty
>> 14171 160th Ave.
>> Foreston MN 56330
>>
>> 320-294-5798 shop
>> 320-630-2243 cell
>>
>> On Sun, Nov 6, 2022 at 9:10 PM  wrote:
>>
>>> I have never seen a flying pig lol
>>>
>>>
>>>
>>> Bill
>>>
>>>
>>>
>>> *From:* 'Curt George' via Legacy Ornamental Mills <
>>> legacy-ornamental-mills@googlegroups.com>
>>> *Sent:* Monday, 7 November 2022 1:31 PM
>>> *To:* legacy-ornamental-mills@googlegroups.com
>>> *Subject:* Re: Name question
>>>
>>>
>>>
>>> Hello Mac.
>>>
>>>
>>>
>>> YES! and No.
>>>
>>>
>>>
>>> Yes Andy did promise Tim a mill for all the reasons you stated.
>>>
>>>
>>>
>>> And No. I have no idea when it will get to him?  (I'm sure it was an
>>> Honest mistake, and it will arrive any day...) ;-p
>>>
>>>
>>>
>>> C.A.G.
>>>
>>> On Sunday, November 6, 2022 at 09:18:38 PM EST, M.W.Foscue <
>>> mwfos...@earthlink.net> wrote:
>>>
>>>
>>>
>>>
>>>
>>> At the risk of digging up old bones - isn't that the Mill that Legacy
>>> was going to send Tim K. years ago - in appreciation for all that he had
>>> done for the Legacy Mill community?
>>>
>>> Mac
>>> --
>>> --
>>>
>>> -Original Message-
>>> From: 
>>> Sent: Nov 6, 2022 3:43 PM
>>> To: 
>>> Subject: RE: Name question
>>>
>>>
>>>
>>> This is the evolution mill
>>>
>>> Bill
>>>
>>> *From:* legacy-ornamental-mills@googlegroups.com <
>>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Dan Krager
>>> *Sent:* Monday, 7 November 2022 2:31 AM
>>> *To:* Legacy Ornamental Mills 
>>> *Subject:* Name question
>>>
>>>
>>>
>>> I see several messages about an "Evolution" Legacy Mill.  I own what the
>>> manual calls a "REVO" legacy mill, which the fine print spells out as short
>>> for "...a *revolution*ary new design."
>>>
>>>
>>>
>>> So am I missing something here?
>>>
>>>
>>>
>>> 

Re: Name question

['Denson Ingram' via Legacy Ornamental Mills]

I guess not a good idea to be under a flock when flying overhead?
Denson

Sent from Denson's iPhone

> On Nov 7, 2022, at 6:25 AM, Tim Ziegler  wrote:
> 
> 
> Yeah and you should hear the commotion when a flock fly's over and you have 
> tall trees. They have a hard
> time perching so usually they ground land and come to a rolling stop about 50 
> yards from where they touch (crash)
> down. that actually helps keep the meat tender too.
> 
> 
> Kind Regards,
> 
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
> 
> 320-294-5798 shop
> 320-630-2243 cell
> 
> 
>> On Sun, Nov 6, 2022 at 11:37 PM M.W.Foscue  wrote:
>> Bill,
>> In case you don't know:  The University of South Carolina spent megabuck$ on 
>> genetic research on pigs; necessary because the S. Carolina's State Protein 
>> is pork.  They LOVE their slow-cooked/smoked southen-style BBQ.  The 
>> realized that pigs grow faster and remain fairly lean when they live in more 
>> mild temps.  To get the most growth from a pig in shortest time, they wee 
>> able to produce a bloodline that could fly.  The idea being they could live 
>> up north in the US Summer and migrate back to S. Carolina over the winter.
>> So far, it has been going very well.
>> What you saw in the photo is one of the early youth that is practicing 
>> flight - and will migrate south in a few days to the Anderson, SC area.
>> Mac
>> -Original Message-
>> From: 
>> Sent: Nov 6, 2022 10:14 PM
>> To: 
>> Subject: Re: Name question
>> 
>>  
>> Here you are Bill
>> Kind Regards,
>>  
>> Timothy J. Ziegler
>> Ziegler WoodWork & Specialty
>> 14171 160th Ave.
>> Foreston MN 56330
>>  
>> 320-294-5798 shop
>> 320-630-2243 cell
>> 
>>> On Sun, Nov 6, 2022 at 9:10 PM  wrote:
>>> I have never seen a flying pig lol
>>> 
>>>  
>>> 
>>> Bill
>>> 
>>>  
>>> 
>>> From: 'Curt George' via Legacy Ornamental Mills 
>>>  
>>> Sent: Monday, 7 November 2022 1:31 PM
>>> To: legacy-ornamental-mills@googlegroups.com
>>> Subject: Re: Name question
>>> 
>>>  
>>> 
>>> Hello Mac.
>>> 
>>>  
>>> 
>>> YES! and No.
>>> 
>>>  
>>> 
>>> Yes Andy did promise Tim a mill for all the reasons you stated.  
>>> 
>>>  
>>> 
>>> And No. I have no idea when it will get to him?  (I'm sure it was an Honest 
>>> mistake, and it will arrive any day...) ;-p
>>> 
>>>  
>>> 
>>> C.A.G.
>>> 
>>> On Sunday, November 6, 2022 at 09:18:38 PM EST, M.W.Foscue 
>>>  wrote:
>>> 
>>>  
>>> 
>>>  
>>> 
>>> At the risk of digging up old bones - isn't that the Mill that Legacy was 
>>> going to send Tim K. years ago - in appreciation for all that he had done 
>>> for the Legacy Mill community?
>>> Mac
>>> -Original Message-
>>> From: 
>>> Sent: Nov 6, 2022 3:43 PM
>>> To: 
>>> Subject: RE: Name question
>>> 
>>>  
>>> This is the evolution mill
>>> 
>>> Bill
>>> 
>>> From: legacy-ornamental-mills@googlegroups.com 
>>>  On Behalf Of Dan Krager
>>> Sent: Monday, 7 November 2022 2:31 AM
>>> To: Legacy Ornamental Mills 
>>> Subject: Name question
>>> 
>>>  
>>> 
>>> I see several messages about an "Evolution" Legacy Mill.  I own what the 
>>> manual calls a "REVO" legacy mill, which the fine print spells out as short 
>>> for "...a revolutionary new design."  
>>> 
>>>  
>>> 
>>> So am I missing something here?
>>> 
>>>  
>>> 
>>> DanK
>>> 
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLG_oP%3DGX0moY%2BhwuwyH_jv6768PwBDHcc2bHkMrhpz1%3Dg%40mail.gmail.com.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/2C782B5D-202B-4073-BAE5-BFDB5FEDEA68%40yahoo.com.

Re: Name question

[Tim Ziegler]

Do you have them running wild on you land too then?

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Nov 7, 2022 at 1:12 AM  wrote:

> Lol mac , America should come down under to get their pigs there are
> millions of them running wild in the outback plague proportions
>
> The professional hunters just shoot them and leave them to rot such a
> waste of good pork.
>
>
>
> Bill
>
>
>
>
>
>
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *M.W.Foscue
> *Sent:* Monday, 7 November 2022 4:38 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Cc:* Timothy Ziegler 
> *Subject:* Re: Name question
>
>
>
> Bill,
>
> In case you don't know:  The University of South Carolina spent megabuck$
> on genetic research on pigs; necessary because the S. Carolina's State
> Protein is pork.  They LOVE their slow-cooked/smoked southen-style BBQ.
> The realized that pigs grow faster and remain fairly lean when they live in
> more mild temps.  To get the most growth from a pig in shortest time, they
> wee able to produce a bloodline that could fly.  The idea being they could
> live up north in the US Summer and migrate back to S. Carolina over the
> winter.
>
> So far, it has been going very well.
>
> What you saw in the photo is one of the early youth that is practicing
> flight - and will migrate south in a few days to the Anderson, SC area.
>
> Mac
> --
> --
>
> -Original Message-
> From: 
> Sent: Nov 6, 2022 10:14 PM
> To: 
> Subject: Re: Name question
>
>
>
> Here you are Bill
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
> On Sun, Nov 6, 2022 at 9:10 PM  wrote:
>
> I have never seen a flying pig lol
>
>
>
> Bill
>
>
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com>
> *Sent:* Monday, 7 November 2022 1:31 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Name question
>
>
>
> Hello Mac.
>
>
>
> YES! and No.
>
>
>
> Yes Andy did promise Tim a mill for all the reasons you stated.
>
>
>
> And No. I have no idea when it will get to him?  (I'm sure it was an
> Honest mistake, and it will arrive any day...) ;-p
>
>
>
> C.A.G.
>
> On Sunday, November 6, 2022 at 09:18:38 PM EST, M.W.Foscue <
> mwfos...@earthlink.net> wrote:
>
>
>
>
>
> At the risk of digging up old bones - isn't that the Mill that Legacy was
> going to send Tim K. years ago - in appreciation for all that he had done
> for the Legacy Mill community?
>
> Mac
> --
> --
>
> -Original Message-
> From: 
> Sent: Nov 6, 2022 3:43 PM
> To: 
> Subject: RE: Name question
>
>
>
> This is the evolution mill
>
> Bill
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Dan Krager
> *Sent:* Monday, 7 November 2022 2:31 AM
> *To:* Legacy Ornamental Mills 
> *Subject:* Name question
>
>
>
> I see several messages about an "Evolution" Legacy Mill.  I own what the
> manual calls a "REVO" legacy mill, which the fine print spells out as short
> for "...a *revolution*ary new design."
>
>
>
> So am I missing something here?
>
>
>
> DanK
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/fb107207-ca1e-6167-8867-514ab1a3fc52%40earthlink.net
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/fb107207-ca1e-6167-8867-514ab1a3fc52%40earthlink.net?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web vis

Re: Name question

[Tim Ziegler]

Yeah and you should hear the commotion when a flock fly's over and you have
tall trees. They have a hard
time perching so usually they ground land and come to a rolling stop about
50 yards from where they touch (crash)
down. that actually helps keep the meat tender too.


Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sun, Nov 6, 2022 at 11:37 PM M.W.Foscue  wrote:

> Bill,
>
> In case you don't know:  The University of South Carolina spent megabuck$
> on genetic research on pigs; necessary because the S. Carolina's State
> Protein is pork.  They LOVE their slow-cooked/smoked southen-style BBQ.
> The realized that pigs grow faster and remain fairly lean when they live in
> more mild temps.  To get the most growth from a pig in shortest time, they
> wee able to produce a bloodline that could fly.  The idea being they could
> live up north in the US Summer and migrate back to S. Carolina over the
> winter.
>
> So far, it has been going very well.
>
> What you saw in the photo is one of the early youth that is practicing
> flight - and will migrate south in a few days to the Anderson, SC area.
>
> Mac
> --
> --
>
> -----Original Message-
> From: 
> Sent: Nov 6, 2022 10:14 PM
> To: 
> Subject: Re: Name question
>
>
> Here you are Bill
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
> On Sun, Nov 6, 2022 at 9:10 PM  wrote:
>
>> I have never seen a flying pig lol
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* 'Curt George' via Legacy Ornamental Mills <
>> legacy-ornamental-mills@googlegroups.com>
>> *Sent:* Monday, 7 November 2022 1:31 PM
>> *To:* legacy-ornamental-mills@googlegroups.com
>> *Subject:* Re: Name question
>>
>>
>>
>> Hello Mac.
>>
>>
>>
>> YES! and No.
>>
>>
>>
>> Yes Andy did promise Tim a mill for all the reasons you stated.
>>
>>
>>
>> And No. I have no idea when it will get to him?  (I'm sure it was an
>> Honest mistake, and it will arrive any day...) ;-p
>>
>>
>>
>> C.A.G.
>>
>> On Sunday, November 6, 2022 at 09:18:38 PM EST, M.W.Foscue <
>> mwfos...@earthlink.net> wrote:
>>
>>
>>
>>
>>
>> At the risk of digging up old bones - isn't that the Mill that Legacy was
>> going to send Tim K. years ago - in appreciation for all that he had done
>> for the Legacy Mill community?
>>
>> Mac
>> --
>> --
>>
>> -Original Message-
>> From: 
>> Sent: Nov 6, 2022 3:43 PM
>> To: 
>> Subject: RE: Name question
>>
>>
>>
>> This is the evolution mill
>>
>> Bill
>>
>> *From:* legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Dan Krager
>> *Sent:* Monday, 7 November 2022 2:31 AM
>> *To:* Legacy Ornamental Mills 
>> *Subject:* Name question
>>
>>
>>
>> I see several messages about an "Evolution" Legacy Mill.  I own what the
>> manual calls a "REVO" legacy mill, which the fine print spells out as short
>> for "...a *revolution*ary new design."
>>
>>
>>
>> So am I missing something here?
>>
>>
>>
>> DanK
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLG_oP%3DGX0moY%2BhwuwyH_jv6768PwBDHcc2bHkMrhpz1%3Dg%40mail.gmail.com.

RE: Name question

[bulkeley]

Lol mac , America should come down under to get their pigs there are millions 
of them running wild in the outback plague proportions

The professional hunters just shoot them and leave them to rot such a waste of 
good pork.

 

Bill

 

 

 

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of M.W.Foscue
Sent: Monday, 7 November 2022 4:38 PM
To: legacy-ornamental-mills@googlegroups.com
Cc: Timothy Ziegler 
Subject: Re: Name question

 

Bill,

In case you don't know:  The University of South Carolina spent megabuck$ on 
genetic research on pigs; necessary because the S. Carolina's State Protein is 
pork.  They LOVE their slow-cooked/smoked southen-style BBQ.  The realized that 
pigs grow faster and remain fairly lean when they live in more mild temps.  To 
get the most growth from a pig in shortest time, they wee able to produce a 
bloodline that could fly.  The idea being they could live up north in the US 
Summer and migrate back to S. Carolina over the winter.

So far, it has been going very well.

What you saw in the photo is one of the early youth that is practicing flight - 
and will migrate south in a few days to the Anderson, SC area.

Mac

  _  

  _  

-Original Message-
From: mailto:legacy-ornamental-mills@googlegroups.com> >
Sent: Nov 6, 2022 10:14 PM
To: mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Re: Name question

 

Here you are Bill


Kind Regards, 

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

On Sun, Nov 6, 2022 at 9:10 PM mailto:bulke...@mmnet.com.au> > wrote:

I have never seen a flying pig lol

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > 
Sent: Monday, 7 November 2022 1:31 PM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: Re: Name question

 

Hello Mac.

 

YES! and No.

 

Yes Andy did promise Tim a mill for all the reasons you stated.  

 

And No. I have no idea when it will get to him?  (I'm sure it was an Honest 
mistake, and it will arrive any day...) ;-p

 

C.A.G.

On Sunday, November 6, 2022 at 09:18:38 PM EST, M.W.Foscue 
mailto:mwfos...@earthlink.net> > wrote: 

 

 

At the risk of digging up old bones - isn't that the Mill that Legacy was going 
to send Tim K. years ago - in appreciation for all that he had done for the 
Legacy Mill community? 

Mac

  _  

  _  

-Original Message-
From: mailto:legacy-ornamental-mills@googlegroups.com> >
Sent: Nov 6, 2022 3:43 PM
To: mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: RE: Name question

 

This is the evolution mill

Bill

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Dan Krager
Sent: Monday, 7 November 2022 2:31 AM
To: Legacy Ornamental Mills mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Name question

 

I see several messages about an "Evolution" Legacy Mill.  I own what the manual 
calls a "REVO" legacy mill, which the fine print spells out as short for "...a 
revolutionary new design."  

 

So am I missing something here?

 

DanK

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/fb107207-ca1e-6167-8867-514ab1a3fc52%40earthlink.net
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/fb107207-ca1e-6167-8867-514ab1a3fc52%40earthlink.net?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000e01d8f278%2450cae0a0%24f260a1e0%24%40mmnet.com.au.

Re: Name question

[M.W.Foscue]

Bill,
In case you don't know:  The University of South Carolina spent megabuck$ on 
genetic research on pigs; necessary because the S. Carolina's State Protein is 
pork.  They LOVE their slow-cooked/smoked southen-style BBQ.  The realized that 
pigs grow faster and remain fairly lean when they live in more mild temps.  To 
get the most growth from a pig in shortest time, they wee able to produce a 
bloodline that could fly.  The idea being they could live up north in the US 
Summer and migrate back to S. Carolina over the winter.
So far, it has been going very well.
What you saw in the photo is one of the early youth that is practicing flight - 
and will migrate south in a few days to the Anderson, SC area.
Mac
-Original Message-
From: 
Sent: Nov 6, 2022 10:14 PM
To: 
Subject: Re: Name question

Here you are BillKind Regards, 
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
 
320-294-5798 shop
320-630-2243 cell





On Sun, Nov 6, 2022 at 9:10 PM mailto:bulke...@mmnet.com.au)> wrote:
I have never seen a flying pig lol
 
Bill
 
From: 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com)> 
Sent: Monday, 7 November 2022 1:31 PM
To: legacy-ornamental-mills@googlegroups.com 
(mailto:legacy-ornamental-mills@googlegroups.com)
Subject: Re: Name question


 
Hello Mac.

 

YES! and No.

 

Yes Andy did promise Tim a mill for all the reasons you stated.  

 

And No. I have no idea when it will get to him?  (I'm sure it was an Honest 
mistake, and it will arrive any day...) ;-p

 

C.A.G.


On Sunday, November 6, 2022 at 09:18:38 PM EST, M.W.Foscue 
mailto:mwfos...@earthlink.net)> wrote: 

 

 

At the risk of digging up old bones - isn't that the Mill that Legacy was going 
to send Tim K. years ago - in appreciation for all that he had done for the 
Legacy Mill community? 
Mac



-Original Message-
From: mailto:legacy-ornamental-mills@googlegroups.com)>
Sent: Nov 6, 2022 3:43 PM
To: mailto:legacy-ornamental-mills@googlegroups.com)>
Subject: RE: Name question
 
This is the evolution mill
Bill
From: legacy-ornamental-mills@googlegroups.com 
(mailto:legacy-ornamental-mills@googlegroups.com) 
mailto:legacy-ornamental-mills@googlegroups.com)> On Behalf Of Dan Krager
Sent: Monday, 7 November 2022 2:31 AM
To: Legacy Ornamental Mills mailto:legacy-ornamental-mills@googlegroups.com)>
Subject: Name question

 
I see several messages about an "Evolution" Legacy Mill.  I own what the manual 
calls a "REVO" legacy mill, which the fine print spells out as short for "...a 
revolutionary new design."  

 

So am I missing something here?

 

DanK












-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/fb107207-ca1e-6167-8867-514ab1a3fc52%40earthlink.net.

RE: Name question

[bulkeley]

Well holy crap Tim Ks mill must be sitting at his front door.

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Monday, 7 November 2022 2:14 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Name question

 

Here you are Bill


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Sun, Nov 6, 2022 at 9:10 PM mailto:bulke...@mmnet.com.au> > wrote:

I have never seen a flying pig lol

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > 
Sent: Monday, 7 November 2022 1:31 PM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: Re: Name question

 

Hello Mac.

 

YES! and No.

 

Yes Andy did promise Tim a mill for all the reasons you stated.  

 

And No. I have no idea when it will get to him?  (I'm sure it was an Honest 
mistake, and it will arrive any day...) ;-p

 

C.A.G.

On Sunday, November 6, 2022 at 09:18:38 PM EST, M.W.Foscue 
mailto:mwfos...@earthlink.net> > wrote: 

 

 

At the risk of digging up old bones - isn't that the Mill that Legacy was going 
to send Tim K. years ago - in appreciation for all that he had done for the 
Legacy Mill community? 

Mac


  _  


  _  


-Original Message-
From: mailto:legacy-ornamental-mills@googlegroups.com> >
Sent: Nov 6, 2022 3:43 PM
To: mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: RE: Name question

 

This is the evolution mill

Bill

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Dan Krager
Sent: Monday, 7 November 2022 2:31 AM
To: Legacy Ornamental Mills mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Name question

 

I see several messages about an "Evolution" Legacy Mill.  I own what the manual 
calls a "REVO" legacy mill, which the fine print spells out as short for "...a 
revolutionary new design."  

 

So am I missing something here?

 

DanK

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/680773f8-489e-49b8-8a9a-36c083bdd891n%40googlegroups.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/680773f8-489e-49b8-8a9a-36c083bdd891n%40googlegroups.com?utm_medium=email&utm_source=footer>
 .

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d8f220%246b89fc30%24429df490%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/01d8f220%246b89fc30%24429df490%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
 .

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/694364a9-aad1-9def-294d-846848868aad%40earthlink.net
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/694364a9-aad1-9def-294d-846848868aad%40earthlink.net?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1163238568.302065.1667788257808%40mail.yahoo.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/1163238568.302065.1667788257808%40mail.yahoo.com?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email

Re: Name question

[Tim Ziegler]

Here you are Bill
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sun, Nov 6, 2022 at 9:10 PM  wrote:

> I have never seen a flying pig lol
>
>
>
> Bill
>
>
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com>
> *Sent:* Monday, 7 November 2022 1:31 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Name question
>
>
>
> Hello Mac.
>
>
>
> YES! and No.
>
>
>
> Yes Andy did promise Tim a mill for all the reasons you stated.
>
>
>
> And No. I have no idea when it will get to him?  (I'm sure it was an
> Honest mistake, and it will arrive any day...) ;-p
>
>
>
> C.A.G.
>
> On Sunday, November 6, 2022 at 09:18:38 PM EST, M.W.Foscue <
> mwfos...@earthlink.net> wrote:
>
>
>
>
>
> At the risk of digging up old bones - isn't that the Mill that Legacy was
> going to send Tim K. years ago - in appreciation for all that he had done
> for the Legacy Mill community?
>
> Mac
> --
> --
>
> -Original Message-
> From: 
> Sent: Nov 6, 2022 3:43 PM
> To: 
> Subject: RE: Name question
>
>
>
> This is the evolution mill
>
> Bill
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Dan Krager
> *Sent:* Monday, 7 November 2022 2:31 AM
> *To:* Legacy Ornamental Mills 
> *Subject:* Name question
>
>
>
> I see several messages about an "Evolution" Legacy Mill.  I own what the
> manual calls a "REVO" legacy mill, which the fine print spells out as short
> for "...a *revolution*ary new design."
>
>
>
> So am I missing something here?
>
>
>
> DanK
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/680773f8-489e-49b8-8a9a-36c083bdd891n%40googlegroups.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/680773f8-489e-49b8-8a9a-36c083bdd891n%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/01d8f220%246b89fc30%24429df490%24%40mmnet.com.au
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/01d8f220%246b89fc30%24429df490%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
> .
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/694364a9-aad1-9def-294d-846848868aad%40earthlink.net
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/694364a9-aad1-9def-294d-846848868aad%40earthlink.net?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/1163238568.302065.1667788257808%40mail.yahoo.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/1163238568.302065.1667788257808%40mail.yahoo.com?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/005801d8f256%2476a36a80%2463ea3f80%24%40mmnet.

RE: Name question

[bulkeley]

I have never seen a flying pig lol

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Monday, 7 November 2022 1:31 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Name question

 

Hello Mac.

 

YES! and No.

 

Yes Andy did promise Tim a mill for all the reasons you stated.  

 

And No. I have no idea when it will get to him?  (I'm sure it was an Honest 
mistake, and it will arrive any day...) ;-p

 

C.A.G.

On Sunday, November 6, 2022 at 09:18:38 PM EST, M.W.Foscue 
mailto:mwfos...@earthlink.net> > wrote: 

 

 

At the risk of digging up old bones - isn't that the Mill that Legacy was going 
to send Tim K. years ago - in appreciation for all that he had done for the 
Legacy Mill community? 

Mac

  _  

  _  

-Original Message-
From: mailto:legacy-ornamental-mills@googlegroups.com> >
Sent: Nov 6, 2022 3:43 PM
To: mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: RE: Name question

 

This is the evolution mill

Bill

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Dan Krager
Sent: Monday, 7 November 2022 2:31 AM
To: Legacy Ornamental Mills mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Name question

 

I see several messages about an "Evolution" Legacy Mill.  I own what the manual 
calls a "REVO" legacy mill, which the fine print spells out as short for "...a 
revolutionary new design."  

 

So am I missing something here?

 

DanK

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/680773f8-489e-49b8-8a9a-36c083bdd891n%40googlegroups.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/680773f8-489e-49b8-8a9a-36c083bdd891n%40googlegroups.com?utm_medium=email&utm_source=footer>
 .

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d8f220%246b89fc30%24429df490%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/01d8f220%246b89fc30%24429df490%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
 .

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/694364a9-aad1-9def-294d-846848868aad%40earthlink.net
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/694364a9-aad1-9def-294d-846848868aad%40earthlink.net?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1163238568.302065.1667788257808%40mail.yahoo.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/1163238568.302065.1667788257808%40mail.yahoo.com?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/005801d8f256%2476a36a80%2463ea3f80%24%40mmnet.com.au.

RE: Name question

[bulkeley]

I believe so yes

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of M.W.Foscue
Sent: Monday, 7 November 2022 1:19 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Name question

 

At the risk of digging up old bones - isn't that the Mill that Legacy was going 
to send Tim K. years ago - in appreciation for all that he had done for the 
Legacy Mill community? 

Mac

  _  

  _  

-Original Message-
From: mailto:legacy-ornamental-mills@googlegroups.com> >
Sent: Nov 6, 2022 3:43 PM
To: mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: RE: Name question

 

This is the evolution mill

Bill

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Dan Krager
Sent: Monday, 7 November 2022 2:31 AM
To: Legacy Ornamental Mills mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Name question

 

I see several messages about an "Evolution" Legacy Mill.  I own what the manual 
calls a "REVO" legacy mill, which the fine print spells out as short for "...a 
revolutionary new design."  

 

So am I missing something here?

 

DanK

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/680773f8-489e-49b8-8a9a-36c083bdd891n%40googlegroups.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/680773f8-489e-49b8-8a9a-36c083bdd891n%40googlegroups.com?utm_medium=email&utm_source=footer>
 .

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d8f220%246b89fc30%24429df490%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/01d8f220%246b89fc30%24429df490%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
 .

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/694364a9-aad1-9def-294d-846848868aad%40earthlink.net
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/694364a9-aad1-9def-294d-846848868aad%40earthlink.net?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/003f01d8f255%24cc3a62b0%2464af2810%24%40mmnet.com.au.

Re: Name question

[Tim Ziegler]

oh now we have another guy to watch for drive motors for. lol
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sun, Nov 6, 2022 at 8:44 PM Dan Krager  wrote:

> Thanks for the clarification.  I just didn't scroll down far enough to see
> the Evolution.  Looks beefy.
> No, Curt, I do not have a motor and really do not want one. Yet.
> DanK
>
> On Sunday, November 6, 2022 at 4:31:33 PM UTC-5 aussiman wrote:
>
>> In my opinion the main reason Evolution Mill didn’t sell was there was no
>> extras for it and none of the regular ones fitted it
>>
>> accept for the 2x and .25 gear sets. I know that was the reason I went
>> with the revo over the Evolution Mill
>>
>> and I was not a fan of a plastic gear linkage .
>>
>> but those linier rails would have been great for template copying work if
>> the Evolution had that capability.
>>
>> I would like to know if it came with a user manual and if it did I sure
>> would like a copy of it to see what that mill can do
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* 'Curt George' via Legacy Ornamental Mills <
>> legacy-orna...@googlegroups.com>
>>
>> *Sent:* Monday, 7 November 2022 7:28 AM
>> *To:* Legacy Ornamental Mills 
>>
>> *Subject:* Re: Name question
>>
>>
>>
>> Hello Dan.
>>
>>
>>
>> The Legacy history page that Tim sent is a good source of information.
>>
>>
>>
>> Your REVO is one neat machine! In many ways it is a better machine then
>> the other Legacy Ornamental mills Legacy made before.
>>
>> I was really shocked when Legacy discontinued it, (I was so sure that
>> Legacy was going to continue making the REVO, Even though they told us that
>> they were going to stop making the manual machines .)
>>
>> NOW The Evolution mill, Was Legacy's last attempt in the manual line of
>> machine.
>>
>> (I personally do not think Legacy made a lot of them)
>>
>> I only know of two people in our group who own one. (and one of them I
>> have not heard form in a number of years now.)
>>
>>
>>
>> I see the Evolution Mill , in the same light as the Ford's Edsel.   ( way
>> a head of its time, but it did not sell well, And was quickly discontinued
>> . ) The Evolution mill had linear rail, ball bearing headstock and acme
>> screw movement, It had a multi directional movement in the Z axis. All
>> steel frame.
>>
>> The only down side was, the size. (if it could handle the same size, as
>> my 1000ex dose. I would have bought one.)
>>
>>
>>
>> Since you Own a REVO.  Do you have a motor control on your machine?
>>
>>
>>
>> On Sunday, November 6, 2022 at 12:12:15 PM UTC-5 Tim wrote:
>>
>> This page will clear things up.
>>
>> https://ornamentalmills.com/history/
>>
>> -Tim
>>
>> On Nov 6, 2022, at 7:31 AM, Dan Krager  wrote:
>>
>> I see several messages about an "Evolution" Legacy Mill.  I own what the
>> manual calls a "REVO" legacy mill, which the fine print spells out as short
>> for "...a *revolution*ary new design."
>>
>>
>>
>> So am I missing something here?
>>
>>
>>
>> DanK
>>
>>
>>
>> --
>>
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental...@googlegroups.com.
>>
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/f71d4f93-15da-418f-9f33-0a55478dae9an%40googlegroups.com
>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/f71d4f93-15da-418f-9f33-0a55478dae9an%40googlegroups.com?utm_medium=email&utm_source=footer>
>> .
>>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/4106cffc-4055-4407-a804-8710994f393an%40googlegroups.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/4106cffc-4055-4407-a804-8710994f393an%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFNEj_1yYUWvsvLgM%3DkydjKc9i3Lttsnd-sVBWQci2%3DsA%40mail.gmail.com.

Re: Name question

[Dan Krager]

Thanks for the clarification.  I just didn't scroll down far enough to see 
the Evolution.  Looks beefy.  
No, Curt, I do not have a motor and really do not want one. Yet. 
DanK

On Sunday, November 6, 2022 at 4:31:33 PM UTC-5 aussiman wrote:

> In my opinion the main reason Evolution Mill didn’t sell was there was no 
> extras for it and none of the regular ones fitted it
>
> accept for the 2x and .25 gear sets. I know that was the reason I went 
> with the revo over the Evolution Mill
>
> and I was not a fan of a plastic gear linkage .
>
> but those linier rails would have been great for template copying work if 
> the Evolution had that capability. 
>
> I would like to know if it came with a user manual and if it did I sure 
> would like a copy of it to see what that mill can do
>
>  
>
> Bill
>
>  
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-orna...@googlegroups.com> 
>
> *Sent:* Monday, 7 November 2022 7:28 AM
> *To:* Legacy Ornamental Mills 
>
> *Subject:* Re: Name question
>
>  
>
> Hello Dan.
>
>  
>
> The Legacy history page that Tim sent is a good source of information.
>
>  
>
> Your REVO is one neat machine! In many ways it is a better machine then 
> the other Legacy Ornamental mills Legacy made before.
>
> I was really shocked when Legacy discontinued it, (I was so sure that 
> Legacy was going to continue making the REVO, Even though they told us that 
> they were going to stop making the manual machines .) 
>
> NOW The Evolution mill, Was Legacy's last attempt in the manual line of 
> machine. 
>
> (I personally do not think Legacy made a lot of them)
>
> I only know of two people in our group who own one. (and one of them I 
> have not heard form in a number of years now.)
>
>  
>
> I see the Evolution Mill , in the same light as the Ford's Edsel.   ( way 
> a head of its time, but it did not sell well, And was quickly discontinued 
> . ) The Evolution mill had linear rail, ball bearing headstock and acme 
> screw movement, It had a multi directional movement in the Z axis. All 
> steel frame.  
>
> The only down side was, the size. (if it could handle the same size, as my 
> 1000ex dose. I would have bought one.)
>
>  
>
> Since you Own a REVO.  Do you have a motor control on your machine?
>
>  
>
> On Sunday, November 6, 2022 at 12:12:15 PM UTC-5 Tim wrote:
>
> This page will clear things up.
>
> https://ornamentalmills.com/history/
>
> -Tim
>
> On Nov 6, 2022, at 7:31 AM, Dan Krager  wrote:
>
> I see several messages about an "Evolution" Legacy Mill.  I own what the 
> manual calls a "REVO" legacy mill, which the fine print spells out as short 
> for "...a *revolution*ary new design."   
>
>  
>
> So am I missing something here?
>
>  
>
> DanK
>
>  
>
> -- 
>
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental...@googlegroups.com.
>
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/legacy-ornamental-mills/f71d4f93-15da-418f-9f33-0a55478dae9an%40googlegroups.com
>  
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/f71d4f93-15da-418f-9f33-0a55478dae9an%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/4106cffc-4055-4407-a804-8710994f393an%40googlegroups.com.

Re: Name question

['Curt George' via Legacy Ornamental Mills]

 Hello Mac.
YES! and No.
Yes Andy did promise Tim a mill for all the reasons you stated.  
And No. I have no idea when it will get to him?  (I'm sure it was an Honest 
mistake, and it will arrive any day...) ;-p
C.A.G.On Sunday, November 6, 2022 at 09:18:38 PM EST, M.W.Foscue 
 wrote:  
 
 
At the risk of digging up old bones - isn't that the Mill that Legacy was going 
to send Tim K. years ago - in appreciation for all that he had done for the 
Legacy Mill community? 

Mac

-Original Message-
From: 
Sent: Nov 6, 2022 3:43 PM
To: 
Subject: RE: Name question

 

This is the evolution mill

Bill

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Dan Krager
Sent: Monday, 7 November 2022 2:31 AM
To: Legacy Ornamental Mills 
Subject: Name question

 

I see several messages about an "Evolution" Legacy Mill.  I own what the manual 
calls a "REVO" legacy mill, which the fine print spells out as short for "...a 
revolutionary new design."  

 

So am I missing something here?

 

DanK

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/680773f8-489e-49b8-8a9a-36c083bdd891n%40googlegroups.com.

 
-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d8f220%246b89fc30%24429df490%24%40mmnet.com.au.
 


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/694364a9-aad1-9def-294d-846848868aad%40earthlink.net.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1163238568.302065.1667788257808%40mail.yahoo.com.

RE: Name question

[M.W.Foscue]

At the risk of digging up old bones - isn't that the Mill that Legacy was going 
to send Tim K. years ago - in appreciation for all that he had done for the 
Legacy Mill community? 
Mac
-Original Message-
From: 
Sent: Nov 6, 2022 3:43 PM
To: 
Subject: RE: Name question

This is the evolution mill
Bill
From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Dan Krager
Sent: Monday, 7 November 2022 2:31 AM
To: Legacy Ornamental Mills 
Subject: Name question


I see several messages about an "Evolution" Legacy Mill.  I own what the manual 
calls a "REVO" legacy mill, which the fine print spells out as short for "...a 
revolutionary new design."  



So am I missing something here?



DanK


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
(mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com).
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/680773f8-489e-49b8-8a9a-36c083bdd891n%40googlegroups.com.


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
(mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com).
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d8f220%246b89fc30%24429df490%24%40mmnet.com.au.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/694364a9-aad1-9def-294d-846848868aad%40earthlink.net.

RE: Name question

[bulkeley]

In my opinion the main reason Evolution Mill didn’t sell was there was no 
extras for it and none of the regular ones fitted it

accept for the 2x and .25 gear sets. I know that was the reason I went with the 
revo over the Evolution Mill

and I was not a fan of a plastic gear linkage .

but those linier rails would have been great for template copying work if the 
Evolution had that capability. 

I would like to know if it came with a user manual and if it did I sure would 
like a copy of it to see what that mill can do

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Monday, 7 November 2022 7:28 AM
To: Legacy Ornamental Mills 
Subject: Re: Name question

 

Hello Dan.

 

The Legacy history page that Tim sent is a good source of information.

 

Your REVO is one neat machine! In many ways it is a better machine then the 
other Legacy Ornamental mills Legacy made before.

I was really shocked when Legacy discontinued it, (I was so sure that Legacy 
was going to continue making the REVO, Even though they told us that they were 
going to stop making the manual machines .) 

NOW The Evolution mill, Was Legacy's last attempt in the manual line of 
machine. 

(I personally do not think Legacy made a lot of them)

I only know of two people in our group who own one. (and one of them I have not 
heard form in a number of years now.)

 

I see the Evolution Mill , in the same light as the Ford's Edsel.   ( way a 
head of its time, but it did not sell well, And was quickly discontinued . ) 
The Evolution mill had linear rail, ball bearing headstock and acme screw 
movement, It had a multi directional movement in the Z axis. All steel frame.  

The only down side was, the size. (if it could handle the same size, as my 
1000ex dose. I would have bought one.)

 

Since you Own a REVO.  Do you have a motor control on your machine?

 

On Sunday, November 6, 2022 at 12:12:15 PM UTC-5 Tim wrote:

This page will clear things up.

https://ornamentalmills.com/history/

-Tim

On Nov 6, 2022, at 7:31 AM, Dan Krager mailto:cdkr...@gmail.com> > wrote:

I see several messages about an "Evolution" Legacy Mill.  I own what the manual 
calls a "REVO" legacy mill, which the fine print spells out as short for "...a 
revolutionary new design."   

 

So am I missing something here?

 

DanK

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/f71d4f93-15da-418f-9f33-0a55478dae9an%40googlegroups.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/f71d4f93-15da-418f-9f33-0a55478dae9an%40googlegroups.com?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/001e01d8f227%241bff4470%2453fdcd50%24%40mmnet.com.au.

RE: Name question

[bulkeley]

This is the evolution mill

Bill

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Dan Krager
Sent: Monday, 7 November 2022 2:31 AM
To: Legacy Ornamental Mills 
Subject: Name question

 

I see several messages about an "Evolution" Legacy Mill.  I own what the manual 
calls a "REVO" legacy mill, which the fine print spells out as short for "...a 
revolutionary new design."   

 

So am I missing something here?

 

DanK

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/680773f8-489e-49b8-8a9a-36c083bdd891n%40googlegroups.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d8f220%246b89fc30%24429df490%24%40mmnet.com.au.

Re: Name question

['Curt George' via Legacy Ornamental Mills]

Hello Dan.

The Legacy history page that Tim sent is a good source of information.

Your REVO is one neat machine! In many ways it is a better machine then the 
other Legacy Ornamental mills Legacy made before.
I was really shocked when Legacy discontinued it, (I was so sure that 
Legacy was going to continue making the REVO, Even though they told us that 
they were going to stop making the manual machines .) 
NOW The Evolution mill, Was Legacy's last attempt in the manual line of 
machine. 
(I personally do not think Legacy made a lot of them)
I only know of two people in our group who own one. (and one of them I have 
not heard form in a number of years now.)

I see the Evolution Mill , in the same light as the Ford's Edsel.   ( way a 
head of its time, but it did not sell well, And was quickly discontinued . 
) The Evolution mill had linear rail, ball bearing headstock and acme screw 
movement, It had a multi directional movement in the Z axis. All steel 
frame.  
The only down side was, the size. (if it could handle the same size, as my 
1000ex dose. I would have bought one.)

Since you Own a REVO.  Do you have a motor control on your machine?

On Sunday, November 6, 2022 at 12:12:15 PM UTC-5 Tim wrote:

> This page will clear things up.
>
> https://ornamentalmills.com/history/
>
> -Tim
> On Nov 6, 2022, at 7:31 AM, Dan Krager  wrote:
>>
>> I see several messages about an "Evolution" Legacy Mill.  I own what the 
>> manual calls a "REVO" legacy mill, which the fine print spells out as short 
>> for "...a *revolution*ary new design."   
>>
>> So am I missing something here?
>>
>> DanK
>>
>>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/f71d4f93-15da-418f-9f33-0a55478dae9an%40googlegroups.com.

Re: Name question

[Tim Krause]

This page will clear things up.

https://ornamentalmills.com/history/

-Tim

On Nov 6, 2022, 7:31 AM, at 7:31 AM, Dan Krager  wrote:
>I see several messages about an "Evolution" Legacy Mill.  I own what
>the 
>manual calls a "REVO" legacy mill, which the fine print spells out as
>short 
>for "...a *revolution*ary new design."   
>
>So am I missing something here?
>
>DanK
>
>-- 
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>To view this discussion on the web visit
>https://groups.google.com/d/msgid/legacy-ornamental-mills/680773f8-489e-49b8-8a9a-36c083bdd891n%40googlegroups.com.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/88c3b57c-6210-4352-901a-910c338a7203%40comcast.net.