Re: MERRY CHRISTMAS

[Tim Ziegler]

lol
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Dec 28, 2020 at 11:46 PM M.W.Foscue  wrote:

> Bill,
> Good one - you got us back.  Although, I think we both ought to start
> recruiting French drivers for the tasks.
> Mac
> --
>
> -Original Message-
> From: bulke...@mmnet.com.au
> Sent: Dec 26, 2020 11:23 PM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: RE: MERRY CHRISTMAS
>
> Mac
>
> Funny we do that with an American in a truck to check for quick sand
> depths in the deserts of the outback we send one in after the other till
> they stop sinking then we know its safe to dive over the top lol
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *M.W.Foscue
> *Sent:* Sunday, 27 December 2020 3:03 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* RE: MERRY CHRISTMAS
>
>
>
> Bill,
>
> I get an Aussie to drive his truck out on it - and if the truck falls
> thru, I  wait two more weeks had have him try it again.  I have to wait two
> weeks because that's how long it takes him to get the truck out and
> restored back to "operating condition".   And I keep doing that until his
> truck stays put.
>
> And, if all else fails, I get Tim Z to tell be when it's "safe". (See his
> input.)
>
> Mac
> ------
>
> -Original Message-
> From: bulke...@mmnet.com.au
> Sent: Dec 26, 2020 2:55 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: RE: MERRY CHRISTMAS
>
>
> Very interesting mac one question how do you know the ice is safe (thick
> enough) to drive on
>
>
>
> Bill
> --
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *M.W.Foscue
> *Sent:* Saturday, 26 December 2020 6:14 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* RE: MERRY CHRISTMAS
>
>
>
> I have a friend that has the steel frame (w/axle & wheels) for the
> specially built trailer they use - on which to construct an Ice Fishing
> "shed".
>
> Two things make it very UNIQUE:
>
> 1.  The axle & wheel assembly is hydraulically lowered to drive it on the
> highway.  When you get the trailer/shed unit out onto your ice fishing
> spot, you release the hydraulic pressure and the axle & wheels retract up
> into the trailer frame - effectively lowering the steel trailer frame down
> onto the ice.
>
> 2.  The steel frame is designed such that there is one fair sized
> rectangular area that has no steel frame or reinforcing members in it.
> That area is about 36" by ~60".   Also, the tongue on these trailers is
> either removable or foldable - to get it out of the way.
>
>
>
> Once the "Ice Fishing House" is lowered onto the ice and you get your
> heater going, you bore your holes in the ice within that open, unobstructed
> rectangle.  After you get the opening in the ice, it takes you skimming and
> occasionally chipping the ice that tries to grow back in the hole.  Of
> course if you go home for the night, you'll have to drill & chip all over
> again the next day.
>
>
>
> I hope this helps.
>
> Mac
> --
>
> -Original Message-
> From: bulke...@mmnet.com.au
> Sent: Dec 26, 2020 1:42 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: RE: MERRY CHRISTMAS
>
>
>
> I know nothing of ice fishing for obvious reasons . so how do you tell the
> ice is thick enough to walk or drive on to go ice fishing
>
> And once you got the hole cut how do you stop it refreezing over while
> your fishing basically please give me an ice fishing lesson 101
>
>
>
> Bill
> --
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Saturday, 26 December 2020 3:17 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: MERRY CHRISTMAS
>
>
>
> Hey Mac
>
> Last email for the night. I am almost ready for ice fishing yes indeed. I
> gave my one Son Ice fishing equipment for Christmas and that
>
> could only mean one thing right?  You guessed it he wants me to take him.
> Better let the ice get a bit thicker though.
>
> Have a blessed night Mac. Glad you got a good sense of humour.
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
> --
>
>

RE: MERRY CHRISTMAS

[bulkeley]

Lol good idea

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of M.W.Foscue
Sent: Tuesday, 29 December 2020 4:46 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: MERRY CHRISTMAS

 

Bill,

Good one - you got us back.  Although, I think we both ought to start 
recruiting French drivers for the tasks.

Mac

  _  

-Original Message- 
From: bulke...@mmnet.com.au <mailto:bulke...@mmnet.com.au>  
Sent: Dec 26, 2020 11:23 PM 
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
Subject: RE: MERRY CHRISTMAS 




Mac

Funny we do that with an American in a truck to check for quick sand depths in 
the deserts of the outback we send one in after the other till they stop 
sinking then we know its safe to dive over the top lol  

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of M.W.Foscue
Sent: Sunday, 27 December 2020 3:03 PM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: RE: MERRY CHRISTMAS

 

Bill,

I get an Aussie to drive his truck out on it - and if the truck falls thru, I  
wait two more weeks had have him try it again.  I have to wait two weeks 
because that's how long it takes him to get the truck out and restored back to 
"operating condition".   And I keep doing that until his truck stays put.

And, if all else fails, I get Tim Z to tell be when it's "safe". (See his 
input.)

Mac


  _  


-Original Message- 
From: bulke...@mmnet.com.au <mailto:bulke...@mmnet.com.au>  
Sent: Dec 26, 2020 2:55 AM 
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
Subject: RE: MERRY CHRISTMAS 





Very interesting mac one question how do you know the ice is safe (thick 
enough) to drive on

 

Bill


  _  


From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of M.W.Foscue
Sent: Saturday, 26 December 2020 6:14 PM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: RE: MERRY CHRISTMAS

 

I have a friend that has the steel frame (w/axle & wheels) for the specially 
built trailer they use - on which to construct an Ice Fishing "shed".

Two things make it very UNIQUE:

1.  The axle & wheel assembly is hydraulically lowered to drive it on the 
highway.  When you get the trailer/shed unit out onto your ice fishing spot, 
you release the hydraulic pressure and the axle & wheels retract up into the 
trailer frame - effectively lowering the steel trailer frame down onto the ice.

2.  The steel frame is designed such that there is one fair sized rectangular 
area that has no steel frame or reinforcing members in it.  That area is about 
36" by ~60".   Also, the tongue on these trailers is either removable or 
foldable - to get it out of the way.

 

Once the "Ice Fishing House" is lowered onto the ice and you get your heater 
going, you bore your holes in the ice within that open, unobstructed rectangle. 
 After you get the opening in the ice, it takes you skimming and occasionally 
chipping the ice that tries to grow back in the hole.  Of course if you go home 
for the night, you'll have to drill & chip all over again the next day.

 

I hope this helps.

Mac


  _  


-Original Message- 
From: bulke...@mmnet.com.au <mailto:bulke...@mmnet.com.au>  
Sent: Dec 26, 2020 1:42 AM 
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
Subject: RE: MERRY CHRISTMAS 






I know nothing of ice fishing for obvious reasons . so how do you tell the ice 
is thick enough to walk or drive on to go ice fishing

And once you got the hole cut how do you stop it refreezing over while your 
fishing basically please give me an ice fishing lesson 101

 

Bill


  _  


From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Saturday, 26 December 2020 3:17 PM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: Re: MERRY CHRISTMAS

 

Hey Mac 

Last email for the night. I am almost ready for ice fishing yes indeed. I gave 
my one Son Ice fishing equipment for Christmas and that 

could only mean one thing right?  You guessed it he wants me to take him. 
Better let the ice get a bit thicker though. 

Have a blessed night Mac. Glad you got a good sense of humour.  


Kind Regards,

 

Timothy J. Ziegler


  _  


 

On Fri, Dec 25, 2020 at 9:55 PM M.W.Foscue mailto:mwfo

RE: MERRY CHRISTMAS

[M.W.Foscue]

Bill,Good one - you got us back.  Although, I think we both ought to start recruiting French drivers for the tasks.Mac-Original Message-
From: bulke...@mmnet.com.au
Sent: Dec 26, 2020 11:23 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: MERRY CHRISTMAS

MacFunny we do that with an American in a truck to check for quick sand depths in the deserts of the outback we send one in after the other till they stop sinking then we know its safe to dive over the top lol   From: legacy-ornamental-mills@googlegroups.com  On Behalf Of M.W.FoscueSent: Sunday, 27 December 2020 3:03 PMTo: legacy-ornamental-mills@googlegroups.comSubject: RE: MERRY CHRISTMAS Bill,I get an Aussie to drive his truck out on it - and if the truck falls thru, I  wait two more weeks had have him try it again.  I have to wait two weeks because that's how long it takes him to get the truck out and restored back to "operating condition".   And I keep doing that until his truck stays put.And, if all else fails, I get Tim Z to tell be when it's "safe". (See his input.)Mac-Original Message- From: bulke...@mmnet.com.au Sent: Dec 26, 2020 2:55 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: MERRY CHRISTMAS Very interesting mac one question how do you know the ice is safe (thick enough) to drive on BillFrom: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> On Behalf Of M.W.FoscueSent: Saturday, 26 December 2020 6:14 PMTo: legacy-ornamental-mills@googlegroups.comSubject: RE: MERRY CHRISTMAS I have a friend that has the steel frame (w/axle & wheels) for the specially built trailer they use - on which to construct an Ice Fishing "shed".Two things make it very UNIQUE:1.  The axle & wheel assembly is hydraulically lowered to drive it on the highway.  When you get the trailer/shed unit out onto your ice fishing spot, you release the hydraulic pressure and the axle & wheels retract up into the trailer frame - effectively lowering the steel trailer frame down onto the ice.2.  The steel frame is designed such that there is one fair sized rectangular area that has no steel frame or reinforcing members in it.  That area is about 36" by ~60".   Also, the tongue on these trailers is either removable or foldable - to get it out of the way. Once the "Ice Fishing House" is lowered onto the ice and you get your heater going, you bore your holes in the ice within that open, unobstructed rectangle.  After you get the opening in the ice, it takes you skimming and occasionally chipping the ice that tries to grow back in the hole.  Of course if you go home for the night, you'll have to drill & chip all over again the next day. I hope this helps.Mac-Original Message- From: bulke...@mmnet.com.au Sent: Dec 26, 2020 1:42 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: MERRY CHRISTMAS I know nothing of ice fishing for obvious reasons . so how do you tell the ice is thick enough to walk or drive on to go ice fishingAnd once you got the hole cut how do you stop it refreezing over while your fishing basically please give me an ice fishing lesson 101 BillFrom: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> On Behalf Of Tim ZieglerSent: Saturday, 26 December 2020 3:17 PMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: MERRY CHRISTMAS Hey Mac Last email for the night. I am almost ready for ice fishing yes indeed. I gave my one Son Ice fishing equipment for Christmas and that could only mean one thing right?  You guessed it he wants me to take him. Better let the ice get a bit thicker though. Have a blessed night Mac. Glad you got a good sense of humour.  Kind Regards, Timothy J. Ziegler On Fri, Dec 25, 2020 at 9:55 PM M.W.Foscue <mwfos...@earthlink.net> wrote:LoL!Ha! - they eventually let us "commoners" own them.  After WWII, the GI's fell in love with them.The first one brought to the US (as the "story"/history goes) was actually brought by Helen Keller.  She was in Japan on a cultural exchange mission(?).  The Japanese Minister of Culture(?) gave her one as a departure gift (NOT a "seeing eye dog" kind of gift.).  It was sort of akin to one of our national officials giving a Bald Eagle to a departing dignitary.  The Akita is still HIGHLY regarded in Japan - for good reason as Ron Taylor mentioned.Here's wishing all ya'll a Wonderful fun-filled Weekend!  (Go ice fishing Tim Z. - and take the cats with you.  Make them catfish!  LoL!)Mac-Original Message- From: Tim Ziegler Sent: Dec 25, 2020 7:25 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: MERRY CHRISTMAS So your Royal Highness where does that put you my friend?   LOL Kind Regards, Timothy J. Ziegler On Fri, Dec 25, 2020 at 3:39 PM M.W.Foscue <mwfos...@earthlink.net> wrote:Thanks, Bill.She's 120 lbs - and about 28" (72cm) at her front shoulder).Co

Re: MERRY CHRISTMAS

[Tim Ziegler]

lol
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sat, Dec 26, 2020 at 10:23 PM  wrote:

> Mac
>
> Funny we do that with an American in a truck to check for quick sand
> depths in the deserts of the outback we send one in after the other till
> they stop sinking then we know its safe to dive over the top lol
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *M.W.Foscue
> *Sent:* Sunday, 27 December 2020 3:03 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* RE: MERRY CHRISTMAS
>
>
>
> Bill,
>
> I get an Aussie to drive his truck out on it - and if the truck falls
> thru, I  wait two more weeks had have him try it again.  I have to wait two
> weeks because that's how long it takes him to get the truck out and
> restored back to "operating condition".   And I keep doing that until his
> truck stays put.
>
> And, if all else fails, I get Tim Z to tell be when it's "safe". (See his
> input.)
>
> Mac
> --
>
> -Original Message-----
> From: bulke...@mmnet.com.au
> Sent: Dec 26, 2020 2:55 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: RE: MERRY CHRISTMAS
>
>
> Very interesting mac one question how do you know the ice is safe (thick
> enough) to drive on
>
>
>
> Bill
> --
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *M.W.Foscue
> *Sent:* Saturday, 26 December 2020 6:14 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* RE: MERRY CHRISTMAS
>
>
>
> I have a friend that has the steel frame (w/axle & wheels) for the
> specially built trailer they use - on which to construct an Ice Fishing
> "shed".
>
> Two things make it very UNIQUE:
>
> 1.  The axle & wheel assembly is hydraulically lowered to drive it on the
> highway.  When you get the trailer/shed unit out onto your ice fishing
> spot, you release the hydraulic pressure and the axle & wheels retract up
> into the trailer frame - effectively lowering the steel trailer frame down
> onto the ice.
>
> 2.  The steel frame is designed such that there is one fair sized
> rectangular area that has no steel frame or reinforcing members in it.
> That area is about 36" by ~60".   Also, the tongue on these trailers is
> either removable or foldable - to get it out of the way.
>
>
>
> Once the "Ice Fishing House" is lowered onto the ice and you get your
> heater going, you bore your holes in the ice within that open, unobstructed
> rectangle.  After you get the opening in the ice, it takes you skimming and
> occasionally chipping the ice that tries to grow back in the hole.  Of
> course if you go home for the night, you'll have to drill & chip all over
> again the next day.
>
>
>
> I hope this helps.
>
> Mac
> --
>
> -Original Message-
> From: bulke...@mmnet.com.au
> Sent: Dec 26, 2020 1:42 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: RE: MERRY CHRISTMAS
>
>
>
> I know nothing of ice fishing for obvious reasons . so how do you tell the
> ice is thick enough to walk or drive on to go ice fishing
>
> And once you got the hole cut how do you stop it refreezing over while
> your fishing basically please give me an ice fishing lesson 101
>
>
>
> Bill
> --
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Saturday, 26 December 2020 3:17 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: MERRY CHRISTMAS
>
>
>
> Hey Mac
>
> Last email for the night. I am almost ready for ice fishing yes indeed. I
> gave my one Son Ice fishing equipment for Christmas and that
>
> could only mean one thing right?  You guessed it he wants me to take him.
> Better let the ice get a bit thicker though.
>
> Have a blessed night Mac. Glad you got a good sense of humour.
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
> --
>
>
>
> On Fri, Dec 25, 2020 at 9:55 PM M.W.Foscue  wrote:
>
> LoL!
>
> Ha! - they eventually let us "commoners" own them.  After WWII, the GI's
> fell in love with them.
>
> The first one brought to the US (as the "story"/history goes) was actually
> brough

RE: MERRY CHRISTMAS

[bulkeley]

Mac

Funny we do that with an American in a truck to check for quick sand depths in 
the deserts of the outback we send one in after the other till they stop 
sinking then we know its safe to dive over the top lol  

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of M.W.Foscue
Sent: Sunday, 27 December 2020 3:03 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: MERRY CHRISTMAS

 

Bill,

I get an Aussie to drive his truck out on it - and if the truck falls thru, I  
wait two more weeks had have him try it again.  I have to wait two weeks 
because that's how long it takes him to get the truck out and restored back to 
"operating condition".   And I keep doing that until his truck stays put.

And, if all else fails, I get Tim Z to tell be when it's "safe". (See his 
input.)

Mac

  _  

-Original Message- 
From: bulke...@mmnet.com.au <mailto:bulke...@mmnet.com.au>  
Sent: Dec 26, 2020 2:55 AM 
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
Subject: RE: MERRY CHRISTMAS 




Very interesting mac one question how do you know the ice is safe (thick 
enough) to drive on

 

Bill


  _  


From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of M.W.Foscue
Sent: Saturday, 26 December 2020 6:14 PM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: RE: MERRY CHRISTMAS

 

I have a friend that has the steel frame (w/axle & wheels) for the specially 
built trailer they use - on which to construct an Ice Fishing "shed".

Two things make it very UNIQUE:

1.  The axle & wheel assembly is hydraulically lowered to drive it on the 
highway.  When you get the trailer/shed unit out onto your ice fishing spot, 
you release the hydraulic pressure and the axle & wheels retract up into the 
trailer frame - effectively lowering the steel trailer frame down onto the ice.

2.  The steel frame is designed such that there is one fair sized rectangular 
area that has no steel frame or reinforcing members in it.  That area is about 
36" by ~60".   Also, the tongue on these trailers is either removable or 
foldable - to get it out of the way.

 

Once the "Ice Fishing House" is lowered onto the ice and you get your heater 
going, you bore your holes in the ice within that open, unobstructed rectangle. 
 After you get the opening in the ice, it takes you skimming and occasionally 
chipping the ice that tries to grow back in the hole.  Of course if you go home 
for the night, you'll have to drill & chip all over again the next day.

 

I hope this helps.

Mac


  _  


-Original Message- 
From: bulke...@mmnet.com.au <mailto:bulke...@mmnet.com.au>  
Sent: Dec 26, 2020 1:42 AM 
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
Subject: RE: MERRY CHRISTMAS 





I know nothing of ice fishing for obvious reasons . so how do you tell the ice 
is thick enough to walk or drive on to go ice fishing

And once you got the hole cut how do you stop it refreezing over while your 
fishing basically please give me an ice fishing lesson 101

 

Bill


  _  


From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Saturday, 26 December 2020 3:17 PM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: Re: MERRY CHRISTMAS

 

Hey Mac 

Last email for the night. I am almost ready for ice fishing yes indeed. I gave 
my one Son Ice fishing equipment for Christmas and that 

could only mean one thing right?  You guessed it he wants me to take him. 
Better let the ice get a bit thicker though. 

Have a blessed night Mac. Glad you got a good sense of humour.  


Kind Regards,

 

Timothy J. Ziegler


  _  


 

On Fri, Dec 25, 2020 at 9:55 PM M.W.Foscue mailto:mwfos...@earthlink.net> > wrote:

LoL!

Ha! - they eventually let us "commoners" own them.  After WWII, the GI's fell 
in love with them.

The first one brought to the US (as the "story"/history goes) was actually 
brought by Helen Keller.  She was in Japan on a cultural exchange mission(?).  
The Japanese Minister of Culture(?) gave her one as a departure gift (NOT a 
"seeing eye dog" kind of gift.).  It was sort of akin to one of our national 
officials giving a Bald Eagle to a departing dignitary.  The Akita is still 
HIGHLY regarded in Japan - for good reason as Ron Taylor mentioned.

Here's wishing all ya'll a Wonderful fun-filled Weekend!  (Go ice fishing Tim 
Z. - and take the cats with you.  Make them catfish!  LoL!)

Mac


  _  


  

Re: MERRY CHRISTMAS

[Tim Ziegler]

lol
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sat, Dec 26, 2020 at 10:02 PM M.W.Foscue  wrote:

> Bill,
> I get an Aussie to drive his truck out on it - and if the truck falls
> thru, I  wait two more weeks had have him try it again.  I have to wait two
> weeks because that's how long it takes him to get the truck out and
> restored back to "operating condition".   And I keep doing that until his
> truck stays put.
> And, if all else fails, I get Tim Z to tell be when it's "safe". (See his
> input.)
> Mac
> --
>
> -Original Message-
> From: bulke...@mmnet.com.au
> Sent: Dec 26, 2020 2:55 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: RE: MERRY CHRISTMAS
>
> Very interesting mac one question how do you know the ice is safe (thick
> enough) to drive on
>
>
>
> Bill
> --
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *M.W.Foscue
> *Sent:* Saturday, 26 December 2020 6:14 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* RE: MERRY CHRISTMAS
>
>
>
> I have a friend that has the steel frame (w/axle & wheels) for the
> specially built trailer they use - on which to construct an Ice Fishing
> "shed".
>
> Two things make it very UNIQUE:
>
> 1.  The axle & wheel assembly is hydraulically lowered to drive it on the
> highway.  When you get the trailer/shed unit out onto your ice fishing
> spot, you release the hydraulic pressure and the axle & wheels retract up
> into the trailer frame - effectively lowering the steel trailer frame down
> onto the ice.
>
> 2.  The steel frame is designed such that there is one fair sized
> rectangular area that has no steel frame or reinforcing members in it.
> That area is about 36" by ~60".   Also, the tongue on these trailers is
> either removable or foldable - to get it out of the way.
>
>
>
> Once the "Ice Fishing House" is lowered onto the ice and you get your
> heater going, you bore your holes in the ice within that open, unobstructed
> rectangle.  After you get the opening in the ice, it takes you skimming and
> occasionally chipping the ice that tries to grow back in the hole.  Of
> course if you go home for the night, you'll have to drill & chip all over
> again the next day.
>
>
>
> I hope this helps.
>
> Mac
> --
>
> -Original Message-
> From: bulke...@mmnet.com.au
> Sent: Dec 26, 2020 1:42 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: RE: MERRY CHRISTMAS
>
>
> I know nothing of ice fishing for obvious reasons . so how do you tell the
> ice is thick enough to walk or drive on to go ice fishing
>
> And once you got the hole cut how do you stop it refreezing over while
> your fishing basically please give me an ice fishing lesson 101
>
>
>
> Bill
> --
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Saturday, 26 December 2020 3:17 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: MERRY CHRISTMAS
>
>
>
> Hey Mac
>
> Last email for the night. I am almost ready for ice fishing yes indeed. I
> gave my one Son Ice fishing equipment for Christmas and that
>
> could only mean one thing right?  You guessed it he wants me to take him.
> Better let the ice get a bit thicker though.
>
> Have a blessed night Mac. Glad you got a good sense of humour.
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
> --
>
>
>
> On Fri, Dec 25, 2020 at 9:55 PM M.W.Foscue  wrote:
>
> LoL!
>
> Ha! - they eventually let us "commoners" own them.  After WWII, the GI's
> fell in love with them.
>
> The first one brought to the US (as the "story"/history goes) was actually
> brought by Helen Keller.  She was in Japan on a cultural exchange
> mission(?).  The Japanese Minister of Culture(?) gave her one as a
> departure gift (NOT a "seeing eye dog" kind of gift.).  It was sort of akin
> to one of our national officials giving a Bald Eagle to a departing
> dignitary.  The Akita is still HIGHLY regarded in Japan - for good reason
> as Ron Taylor mentioned.
>
> Here's wishing all ya'll a Wonderful fun-filled Weekend!  (Go ice fishing
> Tim Z. - and take the cats with you.  Make them catfish!  LoL!)
>
> Mac
> --
> -

RE: MERRY CHRISTMAS

[M.W.Foscue]

Bill,I get an Aussie to drive his truck out on it - and if the truck falls thru, I  wait two more weeks had have him try it again.  I have to wait two weeks because that's how long it takes him to get the truck out and restored back to "operating condition".   And I keep doing that until his truck stays put.And, if all else fails, I get Tim Z to tell be when it's "safe". (See his input.)Mac-Original Message-
From: bulke...@mmnet.com.au
Sent: Dec 26, 2020 2:55 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: MERRY CHRISTMAS

Very interesting mac one question how do you know the ice is safe (thick enough) to drive on BillFrom: legacy-ornamental-mills@googlegroups.com  On Behalf Of M.W.FoscueSent: Saturday, 26 December 2020 6:14 PMTo: legacy-ornamental-mills@googlegroups.comSubject: RE: MERRY CHRISTMAS I have a friend that has the steel frame (w/axle & wheels) for the specially built trailer they use - on which to construct an Ice Fishing "shed".Two things make it very UNIQUE:1.  The axle & wheel assembly is hydraulically lowered to drive it on the highway.  When you get the trailer/shed unit out onto your ice fishing spot, you release the hydraulic pressure and the axle & wheels retract up into the trailer frame - effectively lowering the steel trailer frame down onto the ice.2.  The steel frame is designed such that there is one fair sized rectangular area that has no steel frame or reinforcing members in it.  That area is about 36" by ~60".   Also, the tongue on these trailers is either removable or foldable - to get it out of the way. Once the "Ice Fishing House" is lowered onto the ice and you get your heater going, you bore your holes in the ice within that open, unobstructed rectangle.  After you get the opening in the ice, it takes you skimming and occasionally chipping the ice that tries to grow back in the hole.  Of course if you go home for the night, you'll have to drill & chip all over again the next day. I hope this helps.Mac-Original Message- From: bulke...@mmnet.com.au Sent: Dec 26, 2020 1:42 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: MERRY CHRISTMAS I know nothing of ice fishing for obvious reasons . so how do you tell the ice is thick enough to walk or drive on to go ice fishingAnd once you got the hole cut how do you stop it refreezing over while your fishing basically please give me an ice fishing lesson 101 BillFrom: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> On Behalf Of Tim ZieglerSent: Saturday, 26 December 2020 3:17 PMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: MERRY CHRISTMAS Hey Mac Last email for the night. I am almost ready for ice fishing yes indeed. I gave my one Son Ice fishing equipment for Christmas and that could only mean one thing right?  You guessed it he wants me to take him. Better let the ice get a bit thicker though. Have a blessed night Mac. Glad you got a good sense of humour.  Kind Regards, Timothy J. Ziegler On Fri, Dec 25, 2020 at 9:55 PM M.W.Foscue <mwfos...@earthlink.net> wrote:LoL!Ha! - they eventually let us "commoners" own them.  After WWII, the GI's fell in love with them.The first one brought to the US (as the "story"/history goes) was actually brought by Helen Keller.  She was in Japan on a cultural exchange mission(?).  The Japanese Minister of Culture(?) gave her one as a departure gift (NOT a "seeing eye dog" kind of gift.).  It was sort of akin to one of our national officials giving a Bald Eagle to a departing dignitary.  The Akita is still HIGHLY regarded in Japan - for good reason as Ron Taylor mentioned.Here's wishing all ya'll a Wonderful fun-filled Weekend!  (Go ice fishing Tim Z. - and take the cats with you.  Make them catfish!  LoL!)Mac-Original Message- From: Tim Ziegler Sent: Dec 25, 2020 7:25 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: MERRY CHRISTMAS So your Royal Highness where does that put you my friend?   LOL Kind Regards, Timothy J. Ziegler On Fri, Dec 25, 2020 at 3:39 PM M.W.Foscue <mwfos...@earthlink.net> wrote:Thanks, Bill.She's 120 lbs - and about 28" (72cm) at her front shoulder).Couldn't ask for a better dog.  We are "sold" on the Akita breed.  They originated in Japan - where only the Emperor & "royalty" could own them.  Bred to hunt bear & deer in their northern prefect (Akita Prefect).Very loyal and a good "guard dog" - even w/ children.Look up the movie about an Akita - "Hachi - A Dog's Tale" - staring Richard Gere.Watch it with your kids & grandchildren.  Excellent movie for that - all will enjoy. (Cats might not like it!  LoL!!)Blessngs  all.Mac-Original Message- From: bulke...@mmnet.com.au Sent: Dec 25, 2020 1:58 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: MERRY CHRISTMAS Lovely dog I love big dogs BillF

Re: MERRY CHRISTMAS

[Tim Ziegler]

Sorry Bill I think I hit the hay before your questions come up. I was also
watching LOM videos.
So missed your question. Hope with Mac and my descriptions it all makes
more sense.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sat, Dec 26, 2020 at 1:55 AM  wrote:

> Very interesting mac one question how do you know the ice is safe (thick
> enough) to drive on
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *M.W.Foscue
> *Sent:* Saturday, 26 December 2020 6:14 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* RE: MERRY CHRISTMAS
>
>
>
> I have a friend that has the steel frame (w/axle & wheels) for the
> specially built trailer they use - on which to construct an Ice Fishing
> "shed".
>
> Two things make it very UNIQUE:
>
> 1.  The axle & wheel assembly is hydraulically lowered to drive it on the
> highway.  When you get the trailer/shed unit out onto your ice fishing
> spot, you release the hydraulic pressure and the axle & wheels retract up
> into the trailer frame - effectively lowering the steel trailer frame down
> onto the ice.
>
> 2.  The steel frame is designed such that there is one fair sized
> rectangular area that has no steel frame or reinforcing members in it.
> That area is about 36" by ~60".   Also, the tongue on these trailers is
> either removable or foldable - to get it out of the way.
>
>
>
> Once the "Ice Fishing House" is lowered onto the ice and you get your
> heater going, you bore your holes in the ice within that open, unobstructed
> rectangle.  After you get the opening in the ice, it takes you skimming and
> occasionally chipping the ice that tries to grow back in the hole.  Of
> course if you go home for the night, you'll have to drill & chip all over
> again the next day.
>
>
>
> I hope this helps.
>
> Mac
> --
>
> -Original Message-
> From: bulke...@mmnet.com.au
> Sent: Dec 26, 2020 1:42 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: RE: MERRY CHRISTMAS
>
>
> I know nothing of ice fishing for obvious reasons . so how do you tell the
> ice is thick enough to walk or drive on to go ice fishing
>
> And once you got the hole cut how do you stop it refreezing over while
> your fishing basically please give me an ice fishing lesson 101
>
>
>
> Bill
> ----------
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Saturday, 26 December 2020 3:17 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: MERRY CHRISTMAS
>
>
>
> Hey Mac
>
> Last email for the night. I am almost ready for ice fishing yes indeed. I
> gave my one Son Ice fishing equipment for Christmas and that
>
> could only mean one thing right?  You guessed it he wants me to take him.
> Better let the ice get a bit thicker though.
>
> Have a blessed night Mac. Glad you got a good sense of humour.
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
> --
>
>
>
> On Fri, Dec 25, 2020 at 9:55 PM M.W.Foscue  wrote:
>
> LoL!
>
> Ha! - they eventually let us "commoners" own them.  After WWII, the GI's
> fell in love with them.
>
> The first one brought to the US (as the "story"/history goes) was actually
> brought by Helen Keller.  She was in Japan on a cultural exchange
> mission(?).  The Japanese Minister of Culture(?) gave her one as a
> departure gift (NOT a "seeing eye dog" kind of gift.).  It was sort of akin
> to one of our national officials giving a Bald Eagle to a departing
> dignitary.  The Akita is still HIGHLY regarded in Japan - for good reason
> as Ron Taylor mentioned.
>
> Here's wishing all ya'll a Wonderful fun-filled Weekend!  (Go ice fishing
> Tim Z. - and take the cats with you.  Make them catfish!  LoL!)
>
> Mac
> --
> --
>
> -Original Message-
> From: Tim Ziegler
> Sent: Dec 25, 2020 7:25 PM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: MERRY CHRISTMAS
>
> So your Royal Highness where does that put you my friend?   LOL
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
> --
>
>
>
> On Fri, Dec 25, 2020 at 3:39 PM M.W.Foscue  wrote:
>
> Thanks, Bill.
>
> She's 120 lbs - and about 28" (72cm) at her front shoulder).
>
>

Re: MERRY CHRISTMAS

[Tim Ziegler]

Except lots of us don't have those really fancy Ice fishing Castles but yes
pretty much how it works. lol
The house you described starts out at over $10,000  so I use my $600.00
fold up.
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sat, Dec 26, 2020 at 1:13 AM M.W.Foscue  wrote:

> I have a friend that has the steel frame (w/axle & wheels) for the
> specially built trailer they use - on which to construct an Ice Fishing
> "shed".
> Two things make it very UNIQUE:
> 1.  The axle & wheel assembly is hydraulically lowered to drive it on the
> highway.  When you get the trailer/shed unit out onto your ice fishing
> spot, you release the hydraulic pressure and the axle & wheels retract up
> into the trailer frame - effectively lowering the steel trailer frame down
> onto the ice.
> 2.  The steel frame is designed such that there is one fair sized
> rectangular area that has no steel frame or reinforcing members in it.
> That area is about 36" by ~60".   Also, the tongue on these trailers is
> either removable or foldable - to get it out of the way.
>
> Once the "Ice Fishing House" is lowered onto the ice and you get your
> heater going, you bore your holes in the ice within that open, unobstructed
> rectangle.  After you get the opening in the ice, it takes you skimming and
> occasionally chipping the ice that tries to grow back in the hole.  Of
> course if you go home for the night, you'll have to drill & chip all over
> again the next day.
>
> I hope this helps.
> Mac
> --
>
> -Original Message-
> From: bulke...@mmnet.com.au
> Sent: Dec 26, 2020 1:42 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: RE: MERRY CHRISTMAS
>
> I know nothing of ice fishing for obvious reasons . so how do you tell the
> ice is thick enough to walk or drive on to go ice fishing
>
> And once you got the hole cut how do you stop it refreezing over while
> your fishing basically please give me an ice fishing lesson 101
>
>
>
> Bill
> --
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Saturday, 26 December 2020 3:17 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: MERRY CHRISTMAS
>
>
>
> Hey Mac
>
> Last email for the night. I am almost ready for ice fishing yes indeed. I
> gave my one Son Ice fishing equipment for Christmas and that
>
> could only mean one thing right?  You guessed it he wants me to take him.
> Better let the ice get a bit thicker though.
>
> Have a blessed night Mac. Glad you got a good sense of humour.
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
> --
>
>
>
> On Fri, Dec 25, 2020 at 9:55 PM M.W.Foscue  wrote:
>
> LoL!
>
> Ha! - they eventually let us "commoners" own them.  After WWII, the GI's
> fell in love with them.
>
> The first one brought to the US (as the "story"/history goes) was actually
> brought by Helen Keller.  She was in Japan on a cultural exchange
> mission(?).  The Japanese Minister of Culture(?) gave her one as a
> departure gift (NOT a "seeing eye dog" kind of gift.).  It was sort of akin
> to one of our national officials giving a Bald Eagle to a departing
> dignitary.  The Akita is still HIGHLY regarded in Japan - for good reason
> as Ron Taylor mentioned.
>
> Here's wishing all ya'll a Wonderful fun-filled Weekend!  (Go ice fishing
> Tim Z. - and take the cats with you.  Make them catfish!  LoL!)
>
> Mac
> --
> --
>
> -Original Message-
> From: Tim Ziegler
> Sent: Dec 25, 2020 7:25 PM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: MERRY CHRISTMAS
>
> So your Royal Highness where does that put you my friend?   LOL
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
> --
>
>
>
> On Fri, Dec 25, 2020 at 3:39 PM M.W.Foscue  wrote:
>
> Thanks, Bill.
>
> She's 120 lbs - and about 28" (72cm) at her front shoulder).
>
> Couldn't ask for a better dog.  We are "sold" on the Akita breed.
>
> They originated in Japan - where only the Emperor & "royalty" could own
> them.
>
> Bred to hunt bear & deer in their northern prefect (Akita Prefect).
>
> Very loyal and a good "guard dog" - even w/ children.
>
> Look up the movie about an Akita - "Hachi - A Dog's Tale" - staring
> Richard Gere.
>
> Wa

Re: MERRY CHRISTMAS

[Tim Ziegler]

> --
>>
>> -Original Message-
>> From: 'Curt George' via Legacy Ornamental Mills
>> Sent: Dec 25, 2020 12:48 AM
>> To: "legacy-ornamental-mills@googlegroups.com"
>> Subject: Re: MERRY CRISTMAS
>>
>>
>>
>> *The family said they wanted a cat for Christmas...*
>> *I usually do a turkey but hey if it’ll make em happy...*
>>
>>
>>
>> C.A.G.  ;-P
>> --
>>
>> On Friday, December 25, 2020, 12:42:59 AM EST, 
>> wrote:
>>
>>
>>
>>
>>
>> Simple Christmas dinner here down under roast turkey with home made
>> stuffing, roast potatoes and pumpkin and onion with mint peas.
>>
>> Followed by plumb pudding with custard and jelly and ice cream and a
>> spoon of double cream.
>>
>>
>>
>> All with heaps of treats in between
>>
>>
>>
>> Bill
>> --
>>
>> *From:* legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *M.W.Foscue
>> *Sent:* Friday, 25 December 2020 3:58 PM
>> *To:* legacy-ornamental-mills@googlegroups.com
>> *Subject:* Re: MERRY CRISTMAS
>>
>>
>>
>> Ok Tim - since you brought it up.
>>
>> I was contemplating replying back to Brigitte:
>>
>>
>>
>> "I'm thinking more along the menu of  "British fare" - Standing Rib
>> Roast/Prime Rib Roast!  Cooked only to rare-medium rare! (about 125º F
>> internal).
>>
>> Along with some pan-roasted veggies (brussel sprouts, carrots, parsnips,
>> rutabaga, and potatoes)  YUM!"
>>
>> Mac
>> --
>>
>> -Original Message-
>> From: Tim Ziegler
>> Sent: Dec 24, 2020 11:24 PM
>> To: legacy-ornamental-mills@googlegroups.com
>> Subject: Re: MERRY CHRISTMAS
>>
>> Ham?
>>
>>
>>
>> Merry Christmas to you as well
>>
>> Kind Regards,
>>
>>
>>
>> Timothy J. Ziegler
>> --
>>
>>
>>
>> On Thu, Dec 24, 2020 at 3:50 PM Brigitte Graham <
>> brigittegraha...@gmail.com> wrote:
>>
>> Hi LOM Team,
>>
>> Hope you all have a Christmas that is filled with love, laughter and
>> ...Turkey!
>>
>> Legacy Widow
>> --
>>
>>
>>
>> On Thu, 24 Dec 2020 at 19:30,  wrote:
>>
>> Well its Christmas morning here down under so merry Christmas to all you
>> guys and girls in legacy land
>>
>> From Australia
>>
>> Bill
>>
>> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/1239154655.4701.1608959910700%40wamui-gaston.atl.sa.earthlink.net
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/1239154655.4701.1608959910700%40wamui-gaston.atl.sa.earthlink.net?utm_medium=email_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHEmcPUHQPK1DD6ZkLw7zno0rsS%3DGffqwg53Gjr-m3vfw%40mail.gmail.com.

RE: MERRY CHRISTMAS

[bulkeley]

Very interesting mac one question how do you know the ice is safe (thick 
enough) to drive on

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of M.W.Foscue
Sent: Saturday, 26 December 2020 6:14 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: MERRY CHRISTMAS

 

I have a friend that has the steel frame (w/axle & wheels) for the specially 
built trailer they use - on which to construct an Ice Fishing "shed".

Two things make it very UNIQUE:

1.  The axle & wheel assembly is hydraulically lowered to drive it on the 
highway.  When you get the trailer/shed unit out onto your ice fishing spot, 
you release the hydraulic pressure and the axle & wheels retract up into the 
trailer frame - effectively lowering the steel trailer frame down onto the ice.

2.  The steel frame is designed such that there is one fair sized rectangular 
area that has no steel frame or reinforcing members in it.  That area is about 
36" by ~60".   Also, the tongue on these trailers is either removable or 
foldable - to get it out of the way.

 

Once the "Ice Fishing House" is lowered onto the ice and you get your heater 
going, you bore your holes in the ice within that open, unobstructed rectangle. 
 After you get the opening in the ice, it takes you skimming and occasionally 
chipping the ice that tries to grow back in the hole.  Of course if you go home 
for the night, you'll have to drill & chip all over again the next day.

 

I hope this helps.

Mac

  _  

-Original Message- 
From: bulke...@mmnet.com.au <mailto:bulke...@mmnet.com.au>  
Sent: Dec 26, 2020 1:42 AM 
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
Subject: RE: MERRY CHRISTMAS 




I know nothing of ice fishing for obvious reasons . so how do you tell the ice 
is thick enough to walk or drive on to go ice fishing

And once you got the hole cut how do you stop it refreezing over while your 
fishing basically please give me an ice fishing lesson 101

 

Bill


  _  


From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Saturday, 26 December 2020 3:17 PM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: Re: MERRY CHRISTMAS

 

Hey Mac 

Last email for the night. I am almost ready for ice fishing yes indeed. I gave 
my one Son Ice fishing equipment for Christmas and that 

could only mean one thing right?  You guessed it he wants me to take him. 
Better let the ice get a bit thicker though. 

Have a blessed night Mac. Glad you got a good sense of humour.  


Kind Regards,

 

Timothy J. Ziegler


  _  


 

On Fri, Dec 25, 2020 at 9:55 PM M.W.Foscue mailto:mwfos...@earthlink.net> > wrote:

LoL!

Ha! - they eventually let us "commoners" own them.  After WWII, the GI's fell 
in love with them.

The first one brought to the US (as the "story"/history goes) was actually 
brought by Helen Keller.  She was in Japan on a cultural exchange mission(?).  
The Japanese Minister of Culture(?) gave her one as a departure gift (NOT a 
"seeing eye dog" kind of gift.).  It was sort of akin to one of our national 
officials giving a Bald Eagle to a departing dignitary.  The Akita is still 
HIGHLY regarded in Japan - for good reason as Ron Taylor mentioned.

Here's wishing all ya'll a Wonderful fun-filled Weekend!  (Go ice fishing Tim 
Z. - and take the cats with you.  Make them catfish!  LoL!)

Mac


  _  


  _  


-Original Message- 
From: Tim Ziegler 
Sent: Dec 25, 2020 7:25 PM 
To: legacy-ornamental-mills@googlegroups.com 
Subject: Re: MERRY CHRISTMAS 

So your Royal Highness where does that put you my friend?   LOL 


Kind Regards,

 

Timothy J. Ziegler


  _  


 

On Fri, Dec 25, 2020 at 3:39 PM M.W.Foscue mailto:mwfos...@earthlink.net> > wrote:

Thanks, Bill.

She's 120 lbs - and about 28" (72cm) at her front shoulder).

Couldn't ask for a better dog.  We are "sold" on the Akita breed.  

They originated in Japan - where only the Emperor & "royalty" could own them.  

Bred to hunt bear & deer in their northern prefect (Akita Prefect).

Very loyal and a good "guard dog" - even w/ children.

Look up the movie about an Akita - "Hachi - A Dog's Tale" - staring Richard 
Gere.

Watch it with your kids & grandchildren.  Excellent movie for that - all will 
enjoy. (Cats might not like it!  LoL!!)

Blessngs  all.

Mac


  _  


-Original Message- 
From: bulke...@mmnet.com.au <mailto:bulke...@mmnet.com.au>  
Sent: Dec 25, 2020 1:58 AM 
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
Subject: RE: MERRY CHRISTMAS 

Lovely dog I love big d

RE: MERRY CHRISTMAS

[M.W.Foscue]

I have a friend that has the steel frame (w/axle & wheels) for the specially built trailer they use - on which to construct an Ice Fishing "shed".Two things make it very UNIQUE:1.  The axle & wheel assembly is hydraulically lowered to drive it on the highway.  When you get the trailer/shed unit out onto your ice fishing spot, you release the hydraulic pressure and the axle & wheels retract up into the trailer frame - effectively lowering the steel trailer frame down onto the ice.2.  The steel frame is designed such that there is one fair sized rectangular area that has no steel frame or reinforcing members in it.  That area is about 36" by ~60".   Also, the tongue on these trailers is either removable or foldable - to get it out of the way.Once the "Ice Fishing House" is lowered onto the ice and you get your heater going, you bore your holes in the ice within that open, unobstructed rectangle.  After you get the opening in the ice, it takes you skimming and occasionally chipping the ice that tries to grow back in the hole.  Of course if you go home for the night, you'll have to drill & chip all over again the next day.I hope this helps.Mac-Original Message-
From: bulke...@mmnet.com.au
Sent: Dec 26, 2020 1:42 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: MERRY CHRISTMAS

I know nothing of ice fishing for obvious reasons . so how do you tell the ice is thick enough to walk or drive on to go ice fishingAnd once you got the hole cut how do you stop it refreezing over while your fishing basically please give me an ice fishing lesson 101 BillFrom: legacy-ornamental-mills@googlegroups.com  On Behalf Of Tim ZieglerSent: Saturday, 26 December 2020 3:17 PMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: MERRY CHRISTMAS Hey Mac Last email for the night. I am almost ready for ice fishing yes indeed. I gave my one Son Ice fishing equipment for Christmas and that could only mean one thing right?  You guessed it he wants me to take him. Better let the ice get a bit thicker though. Have a blessed night Mac. Glad you got a good sense of humour.  Kind Regards, Timothy J. Ziegler On Fri, Dec 25, 2020 at 9:55 PM M.W.Foscue <mwfos...@earthlink.net> wrote:LoL!Ha! - they eventually let us "commoners" own them.  After WWII, the GI's fell in love with them.The first one brought to the US (as the "story"/history goes) was actually brought by Helen Keller.  She was in Japan on a cultural exchange mission(?).  The Japanese Minister of Culture(?) gave her one as a departure gift (NOT a "seeing eye dog" kind of gift.).  It was sort of akin to one of our national officials giving a Bald Eagle to a departing dignitary.  The Akita is still HIGHLY regarded in Japan - for good reason as Ron Taylor mentioned.Here's wishing all ya'll a Wonderful fun-filled Weekend!  (Go ice fishing Tim Z. - and take the cats with you.  Make them catfish!  LoL!)Mac-Original Message- From: Tim Ziegler Sent: Dec 25, 2020 7:25 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: MERRY CHRISTMAS So your Royal Highness where does that put you my friend?   LOL Kind Regards, Timothy J. Ziegler On Fri, Dec 25, 2020 at 3:39 PM M.W.Foscue <mwfos...@earthlink.net> wrote:Thanks, Bill.She's 120 lbs - and about 28" (72cm) at her front shoulder).Couldn't ask for a better dog.  We are "sold" on the Akita breed.  They originated in Japan - where only the Emperor & "royalty" could own them.  Bred to hunt bear & deer in their northern prefect (Akita Prefect).Very loyal and a good "guard dog" - even w/ children.Look up the movie about an Akita - "Hachi - A Dog's Tale" - staring Richard Gere.Watch it with your kids & grandchildren.  Excellent movie for that - all will enjoy. (Cats might not like it!  LoL!!)Blessngs  all.Mac-Original Message- From: bulke...@mmnet.com.au Sent: Dec 25, 2020 1:58 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: MERRY CHRISTMAS Lovely dog I love big dogs BillFrom: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> On Behalf Of M.W.FoscueSent: Friday, 25 December 2020 5:12 PMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: MERRY CHRISTMAS Curtis, Love it!  Cute!  (I have no use for cats - we are strictly a "Dogs-R-Us family"  Attached photo is of our Akita.) Mac-----Original Message- From: 'Curt George' via Legacy Ornamental Mills Sent: Dec 25, 2020 12:48 AM To: "legacy-ornamental-mills@googlegroups.com" Subject: Re: MERRY CHRISTMAS  The family said they wanted a cat for Christmas...I usually do a turkey but hey if it’ll make em happy... C.A.G.  ;-POn Friday, December 25, 2020, 12:42:59 AM EST, <bulke...@mmnet.com.au> wrote:   Simple Christmas dinner here down under roast turkey with home made stuffing, roast potatoes and pumpkin and onion with mint peas.Followed b

RE: MERRY CHRISTMAS

[M.W.Foscue]

Tim,Bill "listened" to you.  You didn't see his reply?Here - I cut & pasted it for you:Enjoy!The family said they wanted a cat for Christmas...I usually do a turkey but hey if it’ll make em happy...I'm with Bill!  LoL!!!Mac-Original Message-
From: Tim Ziegler 
Sent: Dec 25, 2020 10:40 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: MERRY CRISTMAS

Sounds like you should get a Cat Bill?Kind Regards,Timothy J. Ziegler
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHav%2BHPe8%2BrQ4bhF5hgQ85kQjt1QyBQrf60rQrnHGXvcw%40mail.gmail.com.On Fri, Dec 25, 2020 at 9:03 PM <bulke...@mmnet.com.au> wrote:Not my bloody dog he will go off with anybody he loves the whole human race lol  BillFrom: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> On Behalf Of Tim ZieglerSent: Saturday, 26 December 2020 11:29 AMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: MERRY CRISTMAS yup for sureKind Regards, Timothy J. ZieglerOn Fri, Dec 25, 2020 at 5:39 PM <bulke...@mmnet.com.au> wrote:Yes very good movie I have seen it and yes you get misty when you watch the undying loyalty of that dog. BillFrom: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> On Behalf Of Ron TaylorSent: Saturday, 26 December 2020 8:55 AMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: MERRY CRISTMAS The Akita is said  to  be the most faithful dog in the world and according to the film Japanese pet owners go to the shrine outside the railway station every year to remember him. The film although of course, somewhat dramatised is essentially the true story of the most faithful dog in the world,  certainly worth a watch but be prepared to shed a tear or two. On Fri, Dec 25, 2020 at 3:39 PM M.W.Foscue <mwfos...@earthlink.net> wrote:Thanks, Bill.She's 120 lbs - and about 28" (72cm) at her front shoulder).Couldn't ask for a better dog.  We are "sold" on the Akita breed.  They originated in Japan - where only the Emperor & "royalty" could own them.  Bred to hunt bear & deer in their northern prefect (Akita Prefect).Very loyal and a good "guard dog" - even w/ children.Look up the movie about an Akita - "Hachi - A Dog's Tale" - staring Richard Gere.Watch it with your kids & grandchildren.  Excellent movie for that - all will enjoy. (Cats might not like it!  LoL!!)Blessngs  all.Mac-Original Message- From: bulke...@mmnet.com.au Sent: Dec 25, 2020 1:58 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: MERRY CRISTMAS Lovely dog I love big dogs BillFrom: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> On Behalf Of M.W.FoscueSent: Friday, 25 December 2020 5:12 PMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: MERRY CRISTMAS Curtis, Love it!  Cute!  (I have no use for cats - we are strictly a "Dogs-R-Us family"  Attached photo is of our Akita.) Mac-Original Message- From: 'Curt George' via Legacy Ornamental Mills Sent: Dec 25, 2020 12:48 AM To: "legacy-ornamental-mills@googlegroups.com" Subject: Re: MERRY CRISTMAS  The family said they wanted a cat for Christmas...I usually do a turkey but hey if it’ll make em happy... C.A.G.  ;-POn Friday, December 25, 2020, 12:42:59 AM EST, <bulke...@mmnet.com.au> wrote:   Simple Christmas dinner here down under roast turkey with home made stuffing, roast potatoes and pumpkin and onion with mint peas.Followed by plumb pudding with custard and jelly and ice cream and a spoon of double cream. All with heaps of treats in between  BillFrom: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> On Behalf Of M.W.FoscueSent: Friday, 25 December 2020 3:58 PMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: MERRY CRISTMAS Ok Tim - since you brought it up.I was contemplating replying back to Brigitte: "I'm thinking more along the menu of  "British fare" - Standing Rib Roast/Prime Rib Roast!  Cooked only to rare-medium rare! (about 125º F internal).Along with some pan-roasted veggies (brussel sprouts, carrots, parsnips, rutabaga, and potatoes)  YUM!"Mac-Original Message- From: Tim Ziegler Sent: Dec 24, 2020 11:24 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: MERRY CHRISTMAS Ham? Merry Christmas to you as wellKind Regards, Timothy J. Ziegler On Thu, Dec 24, 2020 at 3:50 PM Brigitte Graham <brigittegraha...@gmail.com> wrote:Hi LOM Team,Hope you all have a Christmas that is filled with love, laughter and ...Turkey!Legacy Widow On Thu, 24 Dec 2020 at 19:30, <bulke...@mmnet.com.au> wrote:Well its Christmas morning here down under so merry Christmas to all you guys and girls in legacy landFrom AustraliaBill



-- 
You received this message because you are subscribed to the Google Groups "

RE: MERRY CHRISTMAS

[M.W.Foscue]

My wife was actually on a business trip to Japan (Tokyo area) and, since we had the Akita, she arranged to get by that train station and see the Hachi memorial statue.  The "back story" on the statue is very interesting in itself.  Look it up.Yes - get the tissues out when you watch the movie.Have a Wonderful Weekend, ya'll!Mac-Original Message-
From: bulke...@mmnet.com.au
Sent: Dec 25, 2020 6:39 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: MERRY CRISTMAS

Yes very good movie I have seen it and yes you get misty when you watch the undying loyalty of that dog. BillFrom: legacy-ornamental-mills@googlegroups.com  On Behalf Of Ron TaylorSent: Saturday, 26 December 2020 8:55 AMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: MERRY CRISTMAS The Akita is said  to  be the most faithful dog in the world and according to the film Japanese pet owners go to the shrine outside the railway station every year to remember him. The film although of course, somewhat dramatised is essentially the true story of the most faithful dog in the world,  certainly worth a watch but be prepared to shed a tear or two. On Fri, Dec 25, 2020 at 3:39 PM M.W.Foscue <mwfos...@earthlink.net> wrote:Thanks, Bill.She's 120 lbs - and about 28" (72cm) at her front shoulder).Couldn't ask for a better dog.  We are "sold" on the Akita breed.  They originated in Japan - where only the Emperor & "royalty" could own them.  Bred to hunt bear & deer in their northern prefect (Akita Prefect).Very loyal and a good "guard dog" - even w/ children.Look up the movie about an Akita - "Hachi - A Dog's Tale" - staring Richard Gere.Watch it with your kids & grandchildren.  Excellent movie for that - all will enjoy. (Cats might not like it!  LoL!!)Blessngs  all.Mac-Original Message- From: bulke...@mmnet.com.au Sent: Dec 25, 2020 1:58 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: MERRY CRISTMAS Lovely dog I love big dogs Bill From: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> On Behalf Of M.W.FoscueSent: Friday, 25 December 2020 5:12 PMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: MERRY CRISTMAS Curtis, Love it!  Cute!  (I have no use for cats - we are strictly a "Dogs-R-Us family"  Attached photo is of our Akita.) Mac-Original Message- From: 'Curt George' via Legacy Ornamental Mills Sent: Dec 25, 2020 12:48 AM To: "legacy-ornamental-mills@googlegroups.com" Subject: Re: MERRY CRISTMAS  The family said they wanted a cat for Christmas...I usually do a turkey but hey if it’ll make em happy... C.A.G.  ;-POn Friday, December 25, 2020, 12:42:59 AM EST, <bulke...@mmnet.com.au> wrote:   Simple Christmas dinner here down under roast turkey with home made stuffing, roast potatoes and pumpkin and onion with mint peas.Followed by plumb pudding with custard and jelly and ice cream and a spoon of double cream. All with heaps of treats in between  BillFrom: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> On Behalf Of M.W.FoscueSent: Friday, 25 December 2020 3:58 PMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: MERRY CRISTMAS Ok Tim - since you brought it up.I was contemplating replying back to Brigitte: "I'm thinking more along the menu of  "British fare" - Standing Rib Roast/Prime Rib Roast!  Cooked only to rare-medium rare! (about 125º F internal).Along with some pan-roasted veggies (brussel sprouts, carrots, parsnips, rutabaga, and potatoes)  YUM!"Mac-Original Message- From: Tim Ziegler Sent: Dec 24, 2020 11:24 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: MERRY CHRISTMAS Ham? Merry Christmas to you as wellKind Regards, Timothy J. Ziegler On Thu, Dec 24, 2020 at 3:50 PM Brigitte Graham <brigittegraha...@gmail.com> wrote:Hi LOM Team,Hope you all have a Christmas that is filled with love, laughter and ...Turkey!Legacy Widow On Thu, 24 Dec 2020 at 19:30, <bulke...@mmnet.com.au> wrote:Well its Christmas morning here down under so merry Christmas to all you guys and girls in legacy land>From AustraliaBill



-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/722527074.4262.1608948793261%40wamui-gaston.atl.sa.earthlink.net.

Re: Merry Christmas

['Stan Eichelberger' via Legacy Ornamental Mills]

Happy New Year to all

On Tuesday, December 26, 2017 at 12:39:32 AM UTC-5, Va Oak wrote:
>
> Greetings to all.  
> Not sure if my email to Bill and LOM Group Members - wishing all a Merry 
> Christmas was received prior to Bill's "request"/challenge for all to reply 
> with a Merry Christmas ever went through - since I never saw postings on 
> it. 
> (Bill's email had Subject: "Legacy Owner"  DTG:  Date: Dec 24, 2017 3:39 
> PM)
>
> SO here is a "Cut & Paste" of my earlier message/wish for all:
> Mac
> --
>
> Thanks for sharing Bill.  Yes, it has been quiet here lately - hear the 
> crickets?.
> I expect you will be The First to report to us what Santa Claus brought 
> you for Christmas - since he goes there first.  Those of us in Europe and 
> the Americas will have to follow up later.
>
> That being said, then I don't mind taking the time to wish all our Legacy 
> Ornamental Mill Group members a 
>
>
> *Very Merry Christmas and a Safe, Healthy, and Happy New Year!* May you 
> all get what you wanted/needed to improve your life, family, and/or your 
> woodworking "skills/knowledge"!
>
> “And so, as Tiny Tim observed, God bless Us, Every One!” 
> ― Charles Dickens 
> <https://www.goodreads.com/author/show/239579.Charles_Dickens>, A 
> Christmas Carol <https://www.goodreads.com/work/quotes/3097440> 
>
> Mac
> --
> ----------
>
> -Original Message- 
> From: Bill Bulkeley 
> Sent: Dec 24, 2017 3:39 PM 
> To: legacy-orna...@googlegroups.com  
> Subject: RE: merry christmas 
>
> How about this Christmas we have every member post a Christmas hello to 
> show how many members are watching i’d like to hear from every one so 
> please post a Christmas hello to the group everyone don’t be shy
>
>  
>
> Bill
>
>  
>
> *From:* legacy-orna...@googlegroups.com  [mailto:
> legacy-ornamental-mills@googlegroups.com ] *On Behalf Of *Bill 
> Bulkeley
> *Sent:* Monday, 25 December 2017 7:06 AM
> *To:* legacy-orna...@googlegroups.com 
> *Subject:* merry christmas
>
>  
>
> Ho ho ho well its Christmas morning here now i hope Santa got me something 
> woodwork related,
>
> Merry Christmas to all from down under.hope you all have a great day when 
> Christmas day reaches you all as well.
>
>  
>
> Bill
>
>  
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: merry christmas

[russ veinot]

Harvey,
That's close enough for coffee run :>)
Russ

On Sunday, December 24, 2017 at 2:06:04 PM UTC-6, aussiman wrote:
>
> Ho ho ho well its Christmas morning here now i hope Santa got me something 
> woodwork related,
>
> Merry Christmas to all from down under.hope you all have a great day when 
> Christmas day reaches you all as well.
>
>  
>
> Bill
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: merry christmas

[Richard Ellis]

Hi All
Hope you had a great time over Christmas and I wish all members a happy and 
healthy New year.
I myself, am now on a diet for a few days --too much good food 

Richard

On Sunday, December 24, 2017 at 8:06:04 PM UTC, aussiman wrote:
>
> Ho ho ho well its Christmas morning here now i hope Santa got me something 
> woodwork related,
>
> Merry Christmas to all from down under.hope you all have a great day when 
> Christmas day reaches you all as well.
>
>  
>
> Bill
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: merry christmas

[Harvey Matyas]

Russ

I did not know that you lived in Salem, WI.
I'm from Greendale, WI, a suburb of Milwaukee

Harvey


On Tue, Dec 26, 2017 at 8:52 AM, russ veinot  wrote:

> Merry Xmas to all from Salem, WI.  We got our white Xmas on the 24th, but
> didn't slow travel here.
>
> Russ
>
>
> On Sunday, December 24, 2017 at 2:06:04 PM UTC-6, aussiman wrote:
>>
>> Ho ho ho well its Christmas morning here now i hope Santa got me
>> something woodwork related,
>>
>> Merry Christmas to all from down under.hope you all have a great day when
>> Christmas day reaches you all as well.
>>
>>
>>
>> Bill
>>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to legacy-ornamental-mills@
> googlegroups.com.
> Visit this group at https://groups.google.com/
> group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

RE: Merry Christmas

[MWF]

Bill,Thanks for the feedback.  You had a GREAT idea in that.  Thanks for doing it.You are right.  Even those who may read all the posts, but do not feel inclined to "input" on the topics, will hopefully "Chime in" (pun intentional) with a simple "Merry Christmas" (or now maybe a "Happy New Year") comment.  This way you can keep a tally of how many appear to be at least viewing our comments over the past few days.Best wishes to you & family.May you
  enjoy a New Year filled with Great Friends, Excellent Health, and
  an Abundance of Happiness!Be safe - Remember, Safety is no accident.Mac-Original Message-
From: Bill Bulkeley <bulke...@mmnet.com.au>
Sent: Dec 26, 2017 5:51 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Merry Christmas






<zzz!--[if !mso]="">

<zzz![endif]-->

<zzz!--[if gte="" mso="" 9]="">
 
<zzz![endif]--><zzz!--[if gte="" mso="" 9]="">
 
  
 <zzz![endif]-->






Yes mac
i did receive it, that’s what got me thinking to ask all our members to reply
even the lurkers and shy members can it’s not hard

That way
we can see how many are actually still reading our group

 

Bill 

 





From:
legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of MWF
Sent: Tuesday, 26 December 2017
4:40 PM
To:
legacy-ornamental-mills@googlegroups.com;
legacy-ornamental-mills@googlegroups.com
Subject: RE: Merry Christmas





 



Greetings to all.  
Not sure if my email to Bill and LOM Group Members - wishing all a Merry
Christmas was received prior to Bill's "request"/challenge for all to
reply with a Merry Christmas ever went through - since I never saw postings on
it. 
(Bill's email had Subject: "Legacy Owner"  DTG:  Date: Dec
24, 2017 3:39 PM)

SO here is a "Cut & Paste" of my earlier message/wish for all:
Mac








Thanks for sharing Bill.  Yes, it has been quiet here lately - hear the
crickets?.
I expect you will be The First to report to us what Santa Claus brought you for
Christmas - since he goes there first.  Those of us in Europe and the
Americas will have to follow up later.

That being said, then I don't mind taking the time to wish all our Legacy
Ornamental Mill Group members a 

Very Merry Christmas and a Safe, Healthy, and
Happy New Year!
May you all get what
you wanted/needed to improve your life, family, and/or your woodworking
"skills/knowledge"!

“And so, as Tiny Tim observed, God bless Us, Every One!” 
― Charles
Dickens, A
Christmas Carol 

Mac















 

-Original Message- 
From: Bill Bulkeley 
Sent: Dec 24, 2017 3:39 PM 
To: legacy-ornamental-mills@googlegroups.com 
Subject: RE: merry christmas 




How about this Christmas we have every member post a
Christmas hello to show how many members are watching i’d like to hear from
every one so please post a Christmas hello to the group everyone don’t be shy

 

Bill

 





From: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley
Sent: Monday, 25 December 2017
7:06 AM
To:
legacy-ornamental-mills@googlegroups.com
Subject: merry christmas





 

Ho ho ho well its Christmas morning here now i hope Santa
got me something woodwork related,

Merry Christmas to all from down under.hope you all have a
great day when Christmas day reaches you all as well.

 

Bill



<bulke...@mmnet.com.au>










-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: merry christmas

[russ veinot]

Merry Xmas to all from Salem, WI.  We got our white Xmas on the 24th, but 
didn't slow travel here.

Russ

On Sunday, December 24, 2017 at 2:06:04 PM UTC-6, aussiman wrote:
>
> Ho ho ho well its Christmas morning here now i hope Santa got me something 
> woodwork related,
>
> Merry Christmas to all from down under.hope you all have a great day when 
> Christmas day reaches you all as well.
>
>  
>
> Bill
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

RE: merry christmas

[Bill Bulkeley]

Ok Tim so far I think it’s around 18 members if I haven’t counted anyone twice 
please correct me if I’m wrong I was hoping for more but thank you all who did.

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause
Sent: Tuesday, 26 December 2017 7:18 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: merry christmas

 

I missed this challenge message.  So what's the final member count Bill?

Tim

Sent from BlueMail <http://www.bluemail.me/r?b=11558>  

On Dec 24, 2017, at 12:39 PM, Bill Bulkeley <bulke...@mmnet.com.au> wrote:

How about this Christmas we have every member post a Christmas hello to show 
how many members are watching i’d like to hear from every one so please post a 
Christmas hello to the group everyone don’t be shy

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley
Sent: Monday, 25 December 2017 7:06 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: merry christmas

 

Ho ho ho well its Christmas morning here now i hope Santa got me something 
woodwork related,

Merry Christmas to all from down under.hope you all have a great day when 
Christmas day reaches you all as well.

 

Bill

 


 
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 

Virus-free.  
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 www.avg.com 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Merry Christmas

[Arkady Paka]

Mac
Thanks for congratulations.
I greatly appreciate the support of the Congress and the US administration
and also of the American people the sovereignty and territorial integrity
of Ukraine.

Arkady. Ukraine.

2017-12-26 8:13 GMT+02:00 MWF <mwfos...@earthlink.net>:

> Arkady,
>
> That's FANTASTIC - and Amazing!!!
> Congratulations!!  And we will Pray that there will be MANY more years of
> celebrating Christmas as an "official holiday" in your country.
> I know that our President Trump is much more inclined to support your
> country's sovereignty than one (or more) we have had in the last decade or
> so.
>
> Merry Christmas to you and your family, friends, and co-workers.
> Mac
> --
> --
>
> -Original Message-
> From: Arkady Paka
> Sent: Dec 24, 2017 4:20 PM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: merry christmas
>
> Merry Christmas from Ukraine to evrybody.
> I want to note that for the first time in the history of independent
> Ukraine Christmas is celebrated as an official holiday.
>
> Arkady.
>
>
> 2017-12-24 22:39 GMT+02:00 Bill Bulkeley <bulke...@mmnet.com.au>:
>
>> How about this Christmas we have every member post a Christmas hello to
>> show how many members are watching i’d like to hear from every one so
>> please post a Christmas hello to the group everyone don’t be shy
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* legacy-ornamental-mills@googlegroups.com [mailto:
>> legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Bill Bulkeley
>> *Sent:* Monday, 25 December 2017 7:06 AM
>> *To:* legacy-ornamental-mills@googlegroups.com
>> *Subject:* merry christmas
>>
>>
>>
>> Ho ho ho well its Christmas morning here now i hope Santa got me
>> something woodwork related,
>>
>> Merry Christmas to all from down under.hope you all have a great day when
>> Christmas day reaches you all as well.
>>
>>
>>
>> Bill
>>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to legacy-ornamental-mills@
> googlegroups.com.
> Visit this group at https://groups.google.com/
> group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

RE: merry christmas

[Tim Krause]

I missed this challenge message.  So what's the final member count Bill?

Tim

⁣Sent from BlueMail ​

On Dec 24, 2017, 12:39 PM, at 12:39 PM, Bill Bulkeley  
wrote:
>How about this Christmas we have every member post a Christmas hello to
>show how many members are watching i’d like to hear from every one so
>please post a Christmas hello to the group everyone don’t be shy
>
> 
>
>Bill
>
> 
>
>From: legacy-ornamental-mills@googlegroups.com
>[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill
>Bulkeley
>Sent: Monday, 25 December 2017 7:06 AM
>To: legacy-ornamental-mills@googlegroups.com
>Subject: merry christmas
>
> 
>
>Ho ho ho well its Christmas morning here now i hope Santa got me
>something woodwork related,
>
>Merry Christmas to all from down under.hope you all have a great day
>when Christmas day reaches you all as well.
>
> 
>
>Bill
>
> 
>
>
>
>
>
>Virus-free. 
>
>www.avg.com 
>
>-- 
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>To post to this group, send email to
>legacy-ornamental-mills@googlegroups.com.
>Visit this group at
>https://groups.google.com/group/legacy-ornamental-mills.
>For more options, visit https://groups.google.com/d/optout.
>
>-- 
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>To post to this group, send email to
>legacy-ornamental-mills@googlegroups.com.
>Visit this group at
>https://groups.google.com/group/legacy-ornamental-mills.
>For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Merry Christmas

[MWF]

Arkady,That's FANTASTIC - and Amazing!!!Congratulations!!  And we will Pray that there will be MANY more years of celebrating Christmas as an "official holiday" in your country.I know that our President Trump is much more inclined to support your country's sovereignty than one (or more) we have had in the last decade or so.Merry Christmas to you and your family, friends, and co-workers.Mac-Original Message-
From: Arkady Paka <arkadyp...@gmail.com>
Sent: Dec 24, 2017 4:20 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: merry christmas

Merry Christmas from Ukraine to evrybody.I want to note that for the first time in the history of independent Ukraine Christmas is celebrated as an official holiday.Arkady.2017-12-24 22:39 GMT+02:00 Bill Bulkeley <bulke...@mmnet.com.au>:













How about
this Christmas we have every member post a Christmas hello to show how many members
are watching i’d like to hear from every one so please post a Christmas hello
to the group everyone don’t be shy

 

Bill

 





From:
legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mi...@googlegroups.com] On Behalf Of Bill Bulkeley
Sent: Monday, 25 December 2017
7:06 AM
To:
legacy-ornamental-mills@googlegroups.com
Subject: merry christmas





 

Ho ho
ho well its Christmas morning here now i hope Santa got me something woodwork
related,

Merry
Christmas to all from down under.hope you all have a great day when Christmas
day reaches you all as well.

 

Bill








-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: merry christmas

[Okla Mike (Liltwisted)]

Merry Christmas from sunny Oklahoma

Mike and Pam Pung




On 12/24/2017 3:20 PM, Arkady Paka wrote:

Merry Christmas from Ukraine to evrybody.
I want to note that for the first time in the history of independent 
Ukraine Christmas is celebrated as an official holiday.


Arkady.


2017-12-24 22:39 GMT+02:00 Bill Bulkeley >:


How about this Christmas we have every member post a Christmas
hello to show how many members are watching i’d like to hear from
every one so please post a Christmas hello to the group everyone
don’t be shy

Bill

*From:*legacy-ornamental-mills@googlegroups.com

[mailto:legacy-ornamental-mills@googlegroups.com
] *On Behalf Of
*Bill Bulkeley
*Sent:* Monday, 25 December 2017 7:06 AM
*To:* legacy-ornamental-mills@googlegroups.com

*Subject:* merry christmas

Ho ho ho well its Christmas morning here now i hope Santa got me
something woodwork related,

Merry Christmas to all from down under.hope you all have a great
day when Christmas day reaches you all as well.

Bill






Virus-free. www.avg.com




-- 
You received this message because you are subscribed to the Google

Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to
legacy-ornamental-mills+unsubscr...@googlegroups.com
.
To post to this group, send email to
legacy-ornamental-mills@googlegroups.com
.
Visit this group at
https://groups.google.com/group/legacy-ornamental-mills
.
For more options, visit https://groups.google.com/d/optout
.

-- 
You received this message because you are subscribed to the Google

Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to
legacy-ornamental-mills+unsubscr...@googlegroups.com
.
To post to this group, send email to
legacy-ornamental-mills@googlegroups.com
.
Visit this group at
https://groups.google.com/group/legacy-ornamental-mills
.
For more options, visit https://groups.google.com/d/optout
.


--
You received this message because you are subscribed to the Google 
Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send 
an email to legacy-ornamental-mills+unsubscr...@googlegroups.com 
.
To post to this group, send email to 
legacy-ornamental-mills@googlegroups.com 
.
Visit this group at 
https://groups.google.com/group/legacy-ornamental-mills.

For more options, visit https://groups.google.com/d/optout.


--
You received this message because you are subscribed to the Google Groups "Legacy 
Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

RE: merry christmas

[James Fadenrecht]

Merry Christmas from Seattle.



Sent from my Verizon Wireless 4G LTE smartphone


 Original message 
From: parr454 via Legacy Ornamental Mills 
<legacy-ornamental-mills@googlegroups.com>
Date: 12/24/2017 6:42 PM (GMT-08:00)
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: merry christmas

Merry Christmas to All
Peter


-Original Message-
From: Harvey Matyas <hmatyas0...@gmail.com>
To: legacy-ornamental-mills <legacy-ornamental-mills@googlegroups.com>
Sent: Sun, Dec 24, 2017 6:57 pm
Subject: Re: merry christmas

Merry Christmas from Greendale, WI!
Got a paint sprayer and a router bit for woodworking.

I enjoy this site a lot although I don't post often.

Harvey





On Sun, Dec 24, 2017 at 2:05 PM, Bill Bulkeley 
<bulke...@mmnet.com.au<mailto:bulke...@mmnet.com.au>> wrote:
Ho ho ho well its Christmas morning here now i hope Santa got me something 
woodwork related,
Merry Christmas to all from down under.hope you all have a great day when 
Christmas day reaches you all as well.

Bill
--
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to 
legacy-ornamental-mills+unsubscr...@googlegroups.com<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com>.
To post to this group, send email to 
legacy-ornamental-mills@googlegroups.com<mailto:legacy-ornamental-mills@googlegroups.com>.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to 
legacy-ornamental-mills+unsubscr...@googlegroups.com<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com>.
To post to this group, send email to 
legacy-ornamental-mills@googlegroups.com<mailto:legacy-ornamental-mills@googlegroups.com>.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to 
legacy-ornamental-mills+unsubscr...@googlegroups.com<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com>.
To post to this group, send email to 
legacy-ornamental-mills@googlegroups.com<mailto:legacy-ornamental-mills@googlegroups.com>.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: merry christmas

[The Viking]

A Merry and Blessed Christmas from Reno,Nevada


Jon Erik 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: merry christmas

['Gerald Olson' via Legacy Ornamental Mills]

 to all a merry Christmas

On ‎Monday‎, ‎December‎ ‎25‎, ‎2017‎ ‎03‎:‎06‎:‎22‎ ‎AM‎ ‎EST, Tim Krause 
 wrote:  
 
 #yiv7365936044 #yiv7365936044 -- _filtered #yiv7365936044 {panose-1:2 4 5 3 5 
4 6 3 2 4;} _filtered #yiv7365936044 {font-family:Calibri;panose-1:2 15 5 2 2 2 
4 3 2 4;} _filtered #yiv7365936044 {font-family:Tahoma;panose-1:2 11 6 4 3 5 4 
4 2 4;}#yiv7365936044 #yiv7365936044 p.yiv7365936044MsoNormal, #yiv7365936044 
li.yiv7365936044MsoNormal, #yiv7365936044 div.yiv7365936044MsoNormal 
{margin:0cm;margin-bottom:.0001pt;font-size:16.0pt;}#yiv7365936044 a:link, 
#yiv7365936044 span.yiv7365936044MsoHyperlink 
{color:blue;text-decoration:underline;}#yiv7365936044 a:visited, #yiv7365936044 
span.yiv7365936044MsoHyperlinkFollowed 
{color:purple;text-decoration:underline;}#yiv7365936044 p 
{margin-right:0cm;margin-left:0cm;font-size:12.0pt;}#yiv7365936044 
span.yiv7365936044EmailStyle17 
{color:windowtext;font-weight:normal;font-style:normal;}#yiv7365936044 
span.yiv7365936044EmailStyle19 
{color:windowtext;font-weight:normal;font-style:normal;}#yiv7365936044 
.yiv7365936044MsoChpDefault {font-size:10.0pt;} _filtered #yiv7365936044 
{margin:72.0pt 72.0pt 72.0pt 72.0pt;}#yiv7365936044 div.yiv7365936044Section1 
{}#yiv7365936044 
Unless you moved Milt, you where early!  Merry Christmas All, from the Great 
Pacific Northwest!  

-Tim
Sent from BlueMail On Dec 24, 2017, at 1:09 PM, mengel...@gmail.com wrote:
Merry Christmas to all  
 Milt 
 
  Sent from my iPhone   
On Dec 24, 2017, at 12:39 PM, Bill Bulkeley < bulke...@mmnet.com.au> wrote: 
 
  
   
How about this Christmas we have every member post a Christmas hello to show 
how many members are watching i’d like to hear from every one so please post a 
Christmas hello to the group everyone don’t be shy 




 
 

   


 
Bill 




 
 

   


   
From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley
 Sent: Monday, 25 December 2017 7:06 AM
 To: legacy-ornamental-mills@googlegroups.com
 Subject: merry christmas 




   
 

   


 
Ho ho ho well its Christmas morning here now i hope Santa got me something 
woodwork related, 




 
Merry Christmas to all from down under.hope you all have a great day when 
Christmas day reaches you all as well. 




 
 

   


 
Bill 




  
 

   


 
|  
 




  |  
Virus-free. www.avg.com 




  |

  
-- 
 You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
 To unsubscribe from this group and stop receiving emails from it, send an 
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
 To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
 Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
 For more options, visit https://groups.google.com/d/optout. 




  

 -- 
 You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group. 
 To unsubscribe from this group and stop receiving emails from it, send an 
email to legacy-ornamental-mills+unsubscr...@googlegroups.com. 
 To post to this group, send email to legacy-ornamental-mills@googlegroups.com. 
 Visit this group at https://groups.google.com/group/legacy-ornamental-mills. 
 For more options, visit https://groups.google.com/d/optout. 
  
 

 -- 
 You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
 To unsubscribe from this group and stop receiving emails from it, send an 
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
 To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
 Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
 For more options, visit https://groups.google.com/d/optout.



-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: merry christmas

[Tim Krause]

Unless you moved Milt, you where early!  Merry Christmas All, from the Great 
Pacific Northwest!  

-Tim
⁣Sent from BlueMail ​

On Dec 24, 2017, 1:09 PM, at 1:09 PM, mengel...@gmail.com wrote:
>Merry Christmas to all 
>
>Milt
>
>Sent from my iPhone
>
>> On Dec 24, 2017, at 12:39 PM, Bill Bulkeley 
>wrote:
>> 
>> How about this Christmas we have every member post a Christmas hello
>to show how many members are watching i’d like to hear from every one
>so please post a Christmas hello to the group everyone don’t be shy
>>  
>> Bill
>>  
>> From: legacy-ornamental-mills@googlegroups.com
>[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill
>Bulkeley
>> Sent: Monday, 25 December 2017 7:06 AM
>> To: legacy-ornamental-mills@googlegroups.com
>> Subject: merry christmas
>>  
>> Ho ho ho well its Christmas morning here now i hope Santa got me
>something woodwork related,
>> Merry Christmas to all from down under.hope you all have a great day
>when Christmas day reaches you all as well.
>>  
>> Bill
>>  
>> 
>> Virus-free. www.avg.com
>> -- 
>> You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it,
>send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To post to this group, send email to
>legacy-ornamental-mills@googlegroups.com.
>> Visit this group at
>https://groups.google.com/group/legacy-ornamental-mills.
>> For more options, visit https://groups.google.com/d/optout.
>> -- 
>> You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it,
>send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To post to this group, send email to
>legacy-ornamental-mills@googlegroups.com.
>> Visit this group at
>https://groups.google.com/group/legacy-ornamental-mills.
>> For more options, visit https://groups.google.com/d/optout.
>
>-- 
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>To post to this group, send email to
>legacy-ornamental-mills@googlegroups.com.
>Visit this group at
>https://groups.google.com/group/legacy-ornamental-mills.
>For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: merry christmas

[parr454 via Legacy Ornamental Mills]

Merry Christmas to All
Peter



-Original Message-
From: Harvey Matyas <hmatyas0...@gmail.com>
To: legacy-ornamental-mills <legacy-ornamental-mills@googlegroups.com>
Sent: Sun, Dec 24, 2017 6:57 pm
Subject: Re: merry christmas



Merry Christmas from Greendale, WI!
Got a paint sprayer and a router bit for woodworking.


I enjoy this site a lot although I don't post often.


Harvey











On Sun, Dec 24, 2017 at 2:05 PM, Bill Bulkeley <bulke...@mmnet.com.au> wrote:


Ho hoho well its Christmas morning here now i hope Santa got me something 
woodworkrelated,
MerryChristmas to all from down under.hope you all have a great day when 
Christmas dayreaches you all as well.
 
Bill


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.




-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: merry christmas

[Harvey Matyas]

Merry Christmas from Greendale, WI!
Got a paint sprayer and a router bit for woodworking.

I enjoy this site a lot although I don't post often.

Harvey





On Sun, Dec 24, 2017 at 2:05 PM, Bill Bulkeley 
wrote:

> Ho ho ho well its Christmas morning here now i hope Santa got me something
> woodwork related,
>
> Merry Christmas to all from down under.hope you all have a great day when
> Christmas day reaches you all as well.
>
>
>
> Bill
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to legacy-ornamental-mills@
> googlegroups.com.
> Visit this group at https://groups.google.com/
> group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: merry christmas

[John Sasinowski]

Happy Christmas everyone!

- John


On Sun, Dec 24, 2017 at 2:13 PM, Carsten Stigers <carstenstig...@verizon.net
> wrote:

> Merry Christmas to all. It is nice to once again hear that phrase used in
> stores here in the US.
>
> Carsten Stigers
> 1st Vice CMDR/ Chaplain
> Requin Base USSVI
>
>
> -Original Message-
> From: MAX LATHAM <ma...@hotmail.com>
> To: legacy-ornamental-mills <legacy-ornamental-mills@googlegroups.com>
> Sent: Sun, Dec 24, 2017 5:02 pm
> Subject: Re: merry christmas
>
> Ad that's A Merry Christmas!
> And to all, Merry Christmas
> max
>
>
>
> --
> *From:* legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@
> googlegroups.com> on behalf of Arkady Paka <arkadyp...@gmail.com>
> *Sent:* Sunday, December 24, 2017 3:20 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: merry christmas
>
> Merry Christmas from Ukraine to evrybody.
> I want to note that for the first time in the history of independent
> Ukraine Christmas is celebrated as an official holiday.
>
> Arkady.
>
>
> 2017-12-24 22:39 GMT+02:00 Bill Bulkeley <bulke...@mmnet.com.au>:
>
> How about this Christmas we have every member post a Christmas hello to
> show how many members are watching i’d like to hear from every one so
> please post a Christmas hello to the group everyone don’t be shy
>
> Bill
>
> *From:* legacy-ornamental-mills@googlegroups.com [mailto:
> legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Bill Bulkeley
> *Sent:* Monday, 25 December 2017 7:06 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* merry christmas
>
> Ho ho ho well its Christmas morning here now i hope Santa got me something
> woodwork related,
> Merry Christmas to all from down under.hope you all have a great day when
> Christmas day reaches you all as well.
>
> Bill
>
>
> <https://eur03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.avg.com%2Femail-signature%3Futm_medium%3Demail%26utm_source%3Dlink%26utm_campaign%3Dsig-email%26utm_content%3Demailclient=02%7C01%7C%7C9c0732dc794e4dd7be0c08d54b14240a%7C84df9e7fe9f640afb435%7C1%7C0%7C636497472231984949=%2FNF5i2fIGKwcAp%2Bc%2FiV6gIaYi5Os%2F92RaHo3nJfBHBo%3D=0>
> Virus-free.
> <https://eur03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.avg.com%2Femail-signature%3Futm_medium%3Demail%26utm_source%3Dlink%26utm_campaign%3Dsig-email%26utm_content%3Demailclient=02%7C01%7C%7C9c0732dc794e4dd7be0c08d54b14240a%7C84df9e7fe9f640afb435%7C1%7C0%7C636497472231984949=%2FNF5i2fIGKwcAp%2Bc%2FiV6gIaYi5Os%2F92RaHo3nJfBHBo%3D=0>
> www.avg.com
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to legacy-ornamental-mills@google
> groups.com.
> Visit this group at https://groups.google.com/grou
> p/legacy-ornamental-mills
> <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgroups.google.com%2Fgroup%2Flegacy-ornamental-mills=02%7C01%7C%7C9c0732dc794e4dd7be0c08d54b14240a%7C84df9e7fe9f640afb435%7C1%7C0%7C636497472231984949=FuDYEYey5UkbmWOkV1xUKPZOZ44q5b2id5JPGIz1ilw%3D=0>
> .
> For more options, visit https://groups.google.com/d/optout
> <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgroups.google.com%2Fd%2Foptout=02%7C01%7C%7C9c0732dc794e4dd7be0c08d54b14240a%7C84df9e7fe9f640afb435%7C1%7C0%7C636497472231984949=8C0hc3UP7I%2BWr8dYsH3FZSqYSsMLeOSXOXKi3pJybMQ%3D=0>
> .
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to legacy-ornamental-mills@google
> groups.com.
> Visit this group at https://groups.google.com/grou
> p/legacy-ornamental-mills
> <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgroups.google.com%2Fgroup%2Flegacy-ornamental-mills=02%7C01%7C%7C9c0732dc794e4dd7be0c08d54b14240a%7C84df9e7fe9f640afb435%7C1%7C0%7C636497472231984949=FuDYEYey5UkbmWOkV1xUKPZOZ44q5b2id5JPGIz1ilw%3D=0>
> .
> For more options, visit https://groups.google.com/d/optout
> <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgroups.google.com%2Fd%2Foptout=02%7C01%7C%7C9c0732dc794e4dd7be0c08d54b14240a%7C84df9e7fe9f640afb435%7C1%7C0%7C636497472231984949=8C0hc3UP7I%2BWr8dYsH3FZSqYSsM

Re: merry christmas

[Carsten Stigers]

Merry Christmas to all. It is nice to once again hear that phrase used in 
stores here in the US. 


Carsten Stigers
1st Vice CMDR/ Chaplain
Requin Base USSVI



-Original Message-
From: MAX LATHAM <ma...@hotmail.com>
To: legacy-ornamental-mills <legacy-ornamental-mills@googlegroups.com>
Sent: Sun, Dec 24, 2017 5:02 pm
Subject: Re: merry christmas



Ad that's A Merry Christmas!
And to all, Merry Christmas
max






From: legacy-ornamental-mills@googlegroups.com 
<legacy-ornamental-mills@googlegroups.com> on behalf of Arkady Paka 
<arkadyp...@gmail.com>
Sent: Sunday, December 24, 2017 3:20 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: merry christmas
 

Merry Christmas from Ukraine to evrybody.
I want to note that for the first time in the history of independent Ukraine 
Christmas is celebrated as an official holiday.


Arkady.






2017-12-24 22:39 GMT+02:00 Bill Bulkeley <bulke...@mmnet.com.au>:


How about this Christmas we have every member post a Christmas hello to show 
how many members are watching i’d like to hear from every one so please post a 
Christmas hello to the group everyone don’t be shy
 
Bill
 

From:legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com]On Behalf Of Bill Bulkeley
Sent: Monday, 25 December 2017 7:06 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: merry christmas

 
Ho ho ho well its Christmas morning here now i hope Santa got me something 
woodwork related,
Merry Christmas to all from down under.hope you all have a great day when 
Christmas day reaches you all as well.
 
Bill

 




Virus-free.www.avg.com 



--
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
tolegacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.



-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
tolegacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.





-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
tolegacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.



-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: merry christmas

[MAX LATHAM]

Ad that's A Merry Christmas!

And to all, Merry Christmas

max




From: legacy-ornamental-mills@googlegroups.com 
<legacy-ornamental-mills@googlegroups.com> on behalf of Arkady Paka 
<arkadyp...@gmail.com>
Sent: Sunday, December 24, 2017 3:20 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: merry christmas

Merry Christmas from Ukraine to evrybody.
I want to note that for the first time in the history of independent Ukraine 
Christmas is celebrated as an official holiday.

Arkady.


2017-12-24 22:39 GMT+02:00 Bill Bulkeley 
<bulke...@mmnet.com.au<mailto:bulke...@mmnet.com.au>>:

How about this Christmas we have every member post a Christmas hello to show 
how many members are watching i’d like to hear from every one so please post a 
Christmas hello to the group everyone don’t be shy



Bill



From: 
legacy-ornamental-mills@googlegroups.com<mailto:legacy-ornamental-mills@googlegroups.com>
 
[mailto:legacy-ornamental-mills@googlegroups.com<mailto:legacy-ornamental-mills@googlegroups.com>]
 On Behalf Of Bill Bulkeley
Sent: Monday, 25 December 2017 7:06 AM
To: 
legacy-ornamental-mills@googlegroups.com<mailto:legacy-ornamental-mills@googlegroups.com>
Subject: merry christmas



Ho ho ho well its Christmas morning here now i hope Santa got me something 
woodwork related,

Merry Christmas to all from down under.hope you all have a great day when 
Christmas day reaches you all as well.



Bill



[https://ipmcdn.avast.com/images/icons/icon-envelope-tick-green-avg-v1.png]<https://eur03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.avg.com%2Femail-signature%3Futm_medium%3Demail%26utm_source%3Dlink%26utm_campaign%3Dsig-email%26utm_content%3Demailclient=02%7C01%7C%7C9c0732dc794e4dd7be0c08d54b14240a%7C84df9e7fe9f640afb435%7C1%7C0%7C636497472231984949=%2FNF5i2fIGKwcAp%2Bc%2FiV6gIaYi5Os%2F92RaHo3nJfBHBo%3D=0>


Virus-free. 
www.avg.com<https://eur03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.avg.com%2Femail-signature%3Futm_medium%3Demail%26utm_source%3Dlink%26utm_campaign%3Dsig-email%26utm_content%3Demailclient=02%7C01%7C%7C9c0732dc794e4dd7be0c08d54b14240a%7C84df9e7fe9f640afb435%7C1%7C0%7C636497472231984949=%2FNF5i2fIGKwcAp%2Bc%2FiV6gIaYi5Os%2F92RaHo3nJfBHBo%3D=0>


--
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to 
legacy-ornamental-mills+unsubscr...@googlegroups.com<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com>.
To post to this group, send email to 
legacy-ornamental-mills@googlegroups.com<mailto:legacy-ornamental-mills@googlegroups.com>.
Visit this group at 
https://groups.google.com/group/legacy-ornamental-mills<https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgroups.google.com%2Fgroup%2Flegacy-ornamental-mills=02%7C01%7C%7C9c0732dc794e4dd7be0c08d54b14240a%7C84df9e7fe9f640afb435%7C1%7C0%7C636497472231984949=FuDYEYey5UkbmWOkV1xUKPZOZ44q5b2id5JPGIz1ilw%3D=0>.
For more options, visit 
https://groups.google.com/d/optout<https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgroups.google.com%2Fd%2Foptout=02%7C01%7C%7C9c0732dc794e4dd7be0c08d54b14240a%7C84df9e7fe9f640afb435%7C1%7C0%7C636497472231984949=8C0hc3UP7I%2BWr8dYsH3FZSqYSsMLeOSXOXKi3pJybMQ%3D=0>.

--
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to 
legacy-ornamental-mills+unsubscr...@googlegroups.com<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com>.
To post to this group, send email to 
legacy-ornamental-mills@googlegroups.com<mailto:legacy-ornamental-mills@googlegroups.com>.
Visit this group at 
https://groups.google.com/group/legacy-ornamental-mills<https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgroups.google.com%2Fgroup%2Flegacy-ornamental-mills=02%7C01%7C%7C9c0732dc794e4dd7be0c08d54b14240a%7C84df9e7fe9f640afb435%7C1%7C0%7C636497472231984949=FuDYEYey5UkbmWOkV1xUKPZOZ44q5b2id5JPGIz1ilw%3D=0>.
For more options, visit 
https://groups.google.com/d/optout<https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgroups.google.com%2Fd%2Foptout=02%7C01%7C%7C9c0732dc794e4dd7be0c08d54b14240a%7C84df9e7fe9f640afb435%7C1%7C0%7C636497472231984949=8C0hc3UP7I%2BWr8dYsH3FZSqYSsMLeOSXOXKi3pJybMQ%3D=0>.


--
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to 
legacy-ornamental-mills+unsubscr...@googlegroups.com<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com>.
To post to this g

Re: merry christmas

[Brigitte Graham]

Hello Boys
Happy Christmas and a Peaceful New Year ~ from Sunny(!) Devon UK
Legacy Widow

On 24 December 2017 at 20:05, Bill Bulkeley  wrote:

> Ho ho ho well its Christmas morning here now i hope Santa got me something
> woodwork related,
>
> Merry Christmas to all from down under.hope you all have a great day when
> Christmas day reaches you all as well.
>
>
>
> Bill
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to legacy-ornamental-mills@
> googlegroups.com.
> Visit this group at https://groups.google.com/
> group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: merry christmas

[Arkady Paka]

Merry Christmas from Ukraine to evrybody.
I want to note that for the first time in the history of independent
Ukraine Christmas is celebrated as an official holiday.

Arkady.


2017-12-24 22:39 GMT+02:00 Bill Bulkeley :

> How about this Christmas we have every member post a Christmas hello to
> show how many members are watching i’d like to hear from every one so
> please post a Christmas hello to the group everyone don’t be shy
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com [mailto:
> legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Bill Bulkeley
> *Sent:* Monday, 25 December 2017 7:06 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* merry christmas
>
>
>
> Ho ho ho well its Christmas morning here now i hope Santa got me something
> woodwork related,
>
> Merry Christmas to all from down under.hope you all have a great day when
> Christmas day reaches you all as well.
>
>
>
> Bill
>
>
>
>
> 
>
> Virus-free. www.avg.com
> 
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to legacy-ornamental-mills@
> googlegroups.com.
> Visit this group at https://groups.google.com/
> group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to legacy-ornamental-mills@
> googlegroups.com.
> Visit this group at https://groups.google.com/
> group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: merry christmas

[Charles Whitham]

A very Merry Christmas to all, and to all a Happy New Year! May the grain 
always be with you.

Monte



From: legacy-ornamental-mills@googlegroups.com 
<legacy-ornamental-mills@googlegroups.com> on behalf of mengel...@gmail.com 
<mengel...@gmail.com>
Sent: Sunday, December 24, 2017 9:09 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: merry christmas

Merry Christmas to all

Milt

Sent from my iPhone

On Dec 24, 2017, at 12:39 PM, Bill Bulkeley 
<bulke...@mmnet.com.au<mailto:bulke...@mmnet.com.au>> wrote:


How about this Christmas we have every member post a Christmas hello to show 
how many members are watching i’d like to hear from every one so please post a 
Christmas hello to the group everyone don’t be shy



Bill



From: 
legacy-ornamental-mills@googlegroups.com<mailto:legacy-ornamental-mills@googlegroups.com>
 [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley
Sent: Monday, 25 December 2017 7:06 AM
To: 
legacy-ornamental-mills@googlegroups.com<mailto:legacy-ornamental-mills@googlegroups.com>
Subject: merry christmas



Ho ho ho well its Christmas morning here now i hope Santa got me something 
woodwork related,

Merry Christmas to all from down under.hope you all have a great day when 
Christmas day reaches you all as well.



Bill



[https://ipmcdn.avast.com/images/icons/icon-envelope-tick-green-avg-v1.png]<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>


Virus-free. 
www.avg.com<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>


--
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to 
legacy-ornamental-mills+unsubscr...@googlegroups.com<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com>.
To post to this group, send email to 
legacy-ornamental-mills@googlegroups.com<mailto:legacy-ornamental-mills@googlegroups.com>.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to 
legacy-ornamental-mills+unsubscr...@googlegroups.com<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com>.
To post to this group, send email to 
legacy-ornamental-mills@googlegroups.com<mailto:legacy-ornamental-mills@googlegroups.com>.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to 
legacy-ornamental-mills+unsubscr...@googlegroups.com<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com>.
To post to this group, send email to 
legacy-ornamental-mills@googlegroups.com<mailto:legacy-ornamental-mills@googlegroups.com>.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: merry christmas

[mengelke3]

Merry Christmas to all 

Milt

Sent from my iPhone

> On Dec 24, 2017, at 12:39 PM, Bill Bulkeley  wrote:
> 
> How about this Christmas we have every member post a Christmas hello to show 
> how many members are watching i’d like to hear from every one so please post 
> a Christmas hello to the group everyone don’t be shy
>  
> Bill
>  
> From: legacy-ornamental-mills@googlegroups.com 
> [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley
> Sent: Monday, 25 December 2017 7:06 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: merry christmas
>  
> Ho ho ho well its Christmas morning here now i hope Santa got me something 
> woodwork related,
> Merry Christmas to all from down under.hope you all have a great day when 
> Christmas day reaches you all as well.
>  
> Bill
>  
> 
> Virus-free. www.avg.com
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
> Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
> Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

RE: merry christmas

[Bill Bulkeley]

How about this Christmas we have every member post a Christmas hello to show 
how many members are watching i’d like to hear from every one so please post a 
Christmas hello to the group everyone don’t be shy

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley
Sent: Monday, 25 December 2017 7:06 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: merry christmas

 

Ho ho ho well its Christmas morning here now i hope Santa got me something 
woodwork related,

Merry Christmas to all from down under.hope you all have a great day when 
Christmas day reaches you all as well.

 

Bill

 


 

 

Virus-free.  

 www.avg.com 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: merry christmas

['Curt George' via Legacy Ornamental Mills]

Merry Christmas Bill.  May all your Woodworking projects come true this year! 
;-)
C.A.G. 

On Sunday, December 24, 2017 3:06 PM, Bill Bulkeley  
wrote:
 

  Ho hoho well its 
Christmas morning here now i hope Santa got me something woodworkrelated, 
MerryChristmas to all from down under.hope you all have a great day when 
Christmas dayreaches you all as well.    Bill -- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.


   

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Merry Christmas to everyone.

[MAX LATHAM]

Now, if we as a nation, are wise, we will also get on our knees

max



From: legacy-ornamental-mills@googlegroups.com 
<legacy-ornamental-mills@googlegroups.com> on behalf of MWF 
<mwfos...@earthlink.net>
Sent: Wednesday, December 28, 2016 10:56 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Merry Christmas to everyone.

Mike (and all),
It is SO GREAT to see/hear people here in America once again greeting each 
other saying "Merry Christmas".
These past 8 years the greeting was viewed as not "politically correct".  I am 
SO looking forward to these next 4-8 years where we get back to the principles 
and ideals our nation was founded upon - MAKING AMERICA GREAT AGAIN!
I now tell my friends: "We are now about to get the "Change" we were promised 8 
years ago. I now have great HOPE for our nation!
MERRY CHRISTMAS (belated) to ALL in our Group.
And may you all also enjoy a Happy New Year - and may it be PROSPEROUS!!
Mac



-Original Message-
From: "Okla Mike (Liltwisted)"
Sent: Dec 28, 2016 12:37 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Merry Christmas to everyone.


Merry Christ mas to all as well, 2000 miles later and home safe.

Mike OK

On 12/24/2016 2:15 PM, CURTIS GEORGE wrote:
Hello everyone.
The holiday rush is NOW ON!  I just have a few min. BEFORE,
We ( my family and I,) need to leave for church. and then to Dad's house and 
... !

 I wanted to say, I hope your Holiday is a pleasant one, spent with family, (in 
the shop,or not.) Enjoy Life. ;-)

Take care everyone, Merry Christmas to you all !

C.A.G.

--
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to 
legacy-ornamental-mills+unsubscr...@googlegroups.com<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com>.
To post to this group, send email to 
legacy-ornamental-mills@googlegroups.com<mailto:legacy-ornamental-mills@googlegroups.com>.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Merry Christmas to everyone.

[Okla Mike (Liltwisted)]

Merry Christ mas to all as well, 2000 miles later and home safe.

Mike OK


On 12/24/2016 2:15 PM, CURTIS GEORGE wrote:

Hello everyone.
The holiday rush is NOW ON!  I just have a few min. BEFORE,
We ( my family and I,) need to leave for church. and then to Dad's 
house and ... !


 I wanted to say, I hope your Holiday is a pleasant one, spent with 
family, (in the shop,or not.) Enjoy Life. ;-)


Take care everyone, Merry Christmas to you all !

C.A.G.
--
You received this message because you are subscribed to the Google 
Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send 
an email to legacy-ornamental-mills+unsubscr...@googlegroups.com 
.
To post to this group, send email to 
legacy-ornamental-mills@googlegroups.com 
.
Visit this group at 
https://groups.google.com/group/legacy-ornamental-mills.

For more options, visit https://groups.google.com/d/optout.


--
You received this message because you are subscribed to the Google Groups "Legacy 
Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

RE: Merry Christmas to everyone.

[Bill Bulkeley]

Well its Christmas morning here in OZ its hot already and going to be around 90 
today

 

Merry Christmas to all from down under

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE
Sent: Sunday, 25 December 2016 7:15 AM
To: Legacy-Ornamental-Mills
Subject: Merry Christmas to everyone.

 

Hello everyone.

The holiday rush is NOW ON!  I just have a few min. BEFORE,  
We ( my family and I,) need to leave for church. and then to Dad's house and 
... !

 

 I wanted to say, I hope your Holiday is a pleasant one, spent with family, (in 
the shop,or not.) Enjoy Life. ;-)

 

Take care everyone, Merry Christmas to you all !

 

C.A.G.

No virus found in this message.
Checked by AVG - www.avg.com
Version: 2016.0.7924 / Virus Database: 4749/13646 - Release Date: 12/24/16

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: merry christmas

[Arkady Paka]

Merry Christmas to all the group.
Arkady.

2014-12-24 16:04 GMT+02:00 Bill Bulkeley bulke...@mmnet.com.au:

  My closest city is Melbourne

 Bill



 *From:* legacy-ornamental-mills@googlegroups.com [mailto:
 legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Milt on Gmail
 *Sent:* Wednesday, 24 December 2014 11:27 PM

 *To:* legacy-ornamental-mills@googlegroups.com
 *Subject:* Re: merry christmas



 Bill what is your closest city.

 Sent from my Iphone 5


 On Dec 24, 2014, at 2:20 AM, Bill Bulkeley bulke...@mmnet.com.au wrote:

  I like that one I’m number 4  lolol

 *Bill*



 *From:* legacy-ornamental-mills@googlegroups.com [
 mailto:legacy-ornamental-mills@googlegroups.com
 legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Okla Mike
 (Liltwisted)
 *Sent:* Wednesday, 24 December 2014 4:21 PM
 *To:* legacy-ornamental-mills@googlegroups.com
 *Subject:* Re: merry christmas



 image001.jpg

 On 12/23/2014 10:49 PM, mwfos...@earthlink.net wrote:

  Bill,

 Merry Christmas to you and yours!
 As well as to ALL members (active AND lurkers) of our Group.
 Also wishing a Happy, Healthy, Safe, AND Prosperous New Year as well!

 Mac
  --
  --

 -Original Message-
 From: Bill Bulkeley
 Sent: Dec 23, 2014 11:04 PM
 To: legacy-ornamental-mills@googlegroups.com
 Subject: merry christmas



  Well I’m a little ahead of you guys over there, its Christmas eve here
 so I’m getting in a little early for you all and I don’t care how politicly
 incorrect it is I’m an old fashioned boy

 Merry Christmas to all in this group from down under and I hope we all
 keep going posting here for many many more and a very happy and prosperous
 new year for us all

 Bill



 .

 --
 You received this message because you are subscribed to the Google Groups
 Legacy Ornamental Mills group.
 To unsubscribe from this group and stop receiving emails from it, send an
 email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
 To post to this group, send email to
 legacy-ornamental-mills@googlegroups.com.
 Visit this group at http://groups.google.com/group/legacy-ornamental-mills
 .
 For more options, visit https://groups.google.com/d/optout.


   --
 You received this message because you are subscribed to the Google Groups
 Legacy Ornamental Mills group.
 To unsubscribe from this group and stop receiving emails from it, send an
 email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
 To post to this group, send email to
 legacy-ornamental-mills@googlegroups.com.
 Visit this group at http://groups.google.com/group/legacy-ornamental-mills
 .
 For more options, visit https://groups.google.com/d/optout.
 .



 No virus found in this message.
 Checked by AVG - www.avg.com
 Version: 2015.0.5577 / Virus Database: 4257/8796 - Release Date: 12/23/14

 --
 You received this message because you are subscribed to the Google Groups
 Legacy Ornamental Mills group.
 To unsubscribe from this group and stop receiving emails from it, send an
 email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
 To post to this group, send email to
 legacy-ornamental-mills@googlegroups.com.
 Visit this group at http://groups.google.com/group/legacy-ornamental-mills
 .
 For more options, visit https://groups.google.com/d/optout.

 --
 You received this message because you are subscribed to the Google Groups
 Legacy Ornamental Mills group.
 To unsubscribe from this group and stop receiving emails from it, send an
 email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
 To post to this group, send email to
 legacy-ornamental-mills@googlegroups.com.
 Visit this group at http://groups.google.com/group/legacy-ornamental-mills
 .
 For more options, visit https://groups.google.com/d/optout.

 No virus found in this message.
 Checked by AVG - www.avg.com
 Version: 2015.0.5577 / Virus Database: 4257/8796 - Release Date: 12/23/14

 --
 You received this message because you are subscribed to the Google Groups
 Legacy Ornamental Mills group.
 To unsubscribe from this group and stop receiving emails from it, send an
 email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
 To post to this group, send email to
 legacy-ornamental-mills@googlegroups.com.
 Visit this group at http://groups.google.com/group/legacy-ornamental-mills
 .
 For more options, visit https://groups.google.com/d/optout.

 --
 You received this message because you are subscribed to the Google Groups
 Legacy Ornamental Mills group.
 To unsubscribe from this group and stop receiving emails from it, send an
 email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
 To post to this group, send email to
 legacy-ornamental-mills@googlegroups.com.
 Visit this group at http://groups.google.com/group/legacy-ornamental-mills
 .
 For more options, visit https://groups.google.com/d/optout.


-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To unsubscribe

RE: merry christmas

[Bill Bulkeley]

I like that one I’m number 4  lolol

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Okla Mike 
(Liltwisted)
Sent: Wednesday, 24 December 2014 4:21 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: merry christmas

 



On 12/23/2014 10:49 PM, mwfos...@earthlink.net wrote:

Bill,

Merry Christmas to you and yours!  
As well as to ALL members (active AND lurkers) of our Group.
Also wishing a Happy, Healthy, Safe, AND Prosperous New Year as well!

Mac


  _  


  _  


-Original Message- 
From: Bill Bulkeley 
Sent: Dec 23, 2014 11:04 PM 
To: legacy-ornamental-mills@googlegroups.com 
Subject: merry christmas 




Well I’m a little ahead of you guys over there, its Christmas eve here so I’m 
getting in a little early for you all and I don’t care how politicly incorrect 
it is I’m an old fashioned boy

Merry Christmas to all in this group from down under and I hope we all keep 
going posting here for many many more and a very happy and prosperous new year 
for us all

Bill

 

.

-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.



-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.
. 

 

No virus found in this message.
Checked by AVG - www.avg.com
Version: 2015.0.5577 / Virus Database: 4257/8796 - Release Date: 12/23/14

-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: merry christmas

[Milt on Gmail]

Bill what is your closest city. 

Sent from my Iphone 5

 On Dec 24, 2014, at 2:20 AM, Bill Bulkeley bulke...@mmnet.com.au wrote:
 
 I like that one I’m number 4  lolol
 Bill
  
 From: legacy-ornamental-mills@googlegroups.com 
 [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Okla Mike 
 (Liltwisted)
 Sent: Wednesday, 24 December 2014 4:21 PM
 To: legacy-ornamental-mills@googlegroups.com
 Subject: Re: merry christmas
  
 image001.jpg
 On 12/23/2014 10:49 PM, mwfos...@earthlink.net wrote:
 Bill,
 
 Merry Christmas to you and yours!  
 As well as to ALL members (active AND lurkers) of our Group.
 Also wishing a Happy, Healthy, Safe, AND Prosperous New Year as well!
 
 Mac
 -Original Message- 
 From: Bill Bulkeley 
 Sent: Dec 23, 2014 11:04 PM 
 To: legacy-ornamental-mills@googlegroups.com 
 Subject: merry christmas 
 
 
 Well I’m a little ahead of you guys over there, its Christmas eve here so I’m 
 getting in a little early for you all and I don’t care how politicly 
 incorrect it is I’m an old fashioned boy
 Merry Christmas to all in this group from down under and I hope we all keep 
 going posting here for many many more and a very happy and prosperous new 
 year for us all
 Bill
  
 .
 -- 
 You received this message because you are subscribed to the Google Groups 
 Legacy Ornamental Mills group.
 To unsubscribe from this group and stop receiving emails from it, send an 
 email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
 To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
 Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
 For more options, visit https://groups.google.com/d/optout.
 
 -- 
 You received this message because you are subscribed to the Google Groups 
 Legacy Ornamental Mills group.
 To unsubscribe from this group and stop receiving emails from it, send an 
 email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
 To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
 Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
 For more options, visit https://groups.google.com/d/optout.
 .
  
 No virus found in this message.
 Checked by AVG - www.avg.com
 Version: 2015.0.5577 / Virus Database: 4257/8796 - Release Date: 12/23/14
 -- 
 You received this message because you are subscribed to the Google Groups 
 Legacy Ornamental Mills group.
 To unsubscribe from this group and stop receiving emails from it, send an 
 email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
 To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
 Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
 For more options, visit https://groups.google.com/d/optout.
 -- 
 You received this message because you are subscribed to the Google Groups 
 Legacy Ornamental Mills group.
 To unsubscribe from this group and stop receiving emails from it, send an 
 email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
 To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
 Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
 For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: merry christmas

[CURTIS GEORGE]

Mike you are much skinnier then the Santa I grew up with. ;-) I think of you as 
a 3- 1/2 in my book. ;-P 
Merry Christmas. To you and all the group. 
C.A.G. 

- Original Message -

From: Okla Mike (Liltwisted) legacym...@iglide.net 
To: legacy-ornamental-mills@googlegroups.com 
Sent: Wednesday, December 24, 2014 12:21:29 AM 
Subject: Re: merry christmas 

On 12/23/2014 10:49 PM, mwfos...@earthlink.net wrote: 



Bill, 

Merry Christmas to you and yours! 
As well as to ALL members (active AND lurkers) of our Group. 
Also wishing a Happy, Healthy, Safe, AND Prosperous New Year as well! 

Mac 



blockquote
-Original Message- 
From: Bill Bulkeley 
Sent: Dec 23, 2014 11:04 PM 
To: legacy-ornamental-mills@googlegroups.com 
Subject: merry christmas 



Well I’m a little ahead of you guys over there, its Christmas eve here so I’m 
getting in a little early for you all and I don’t care how politicly incorrect 
it is I’m an old fashioned boy 

Merry Christmas to all in this group from down under and I hope we all keep 
going posting here for many many more and a very happy and prosperous new year 
for us all 

Bill 



. 
-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group. 
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com . 
To post to this group, send email to legacy-ornamental-mills@googlegroups.com . 
Visit this group at http://groups.google.com/group/legacy-ornamental-mills . 
For more options, visit https://groups.google.com/d/optout . 



-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group. 
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com . 
To post to this group, send email to legacy-ornamental-mills@googlegroups.com . 
Visit this group at http://groups.google.com/group/legacy-ornamental-mills . 
For more options, visit https://groups.google.com/d/optout . 
. 
/blockquote



-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group. 
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com . 
To post to this group, send email to legacy-ornamental-mills@googlegroups.com . 
Visit this group at http://groups.google.com/group/legacy-ornamental-mills . 
For more options, visit https://groups.google.com/d/optout . 

-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

RE: merry christmas

[Bill Bulkeley]

My closest city is Melbourne

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Milt on Gmail
Sent: Wednesday, 24 December 2014 11:27 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: merry christmas

 

Bill what is your closest city. 

Sent from my Iphone 5


On Dec 24, 2014, at 2:20 AM, Bill Bulkeley bulke...@mmnet.com.au wrote:

I like that one I’m number 4  lolol

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Okla Mike 
(Liltwisted)
Sent: Wednesday, 24 December 2014 4:21 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: merry christmas

 

image001.jpg

On 12/23/2014 10:49 PM, mwfos...@earthlink.net wrote:

Bill,

Merry Christmas to you and yours!  
As well as to ALL members (active AND lurkers) of our Group.
Also wishing a Happy, Healthy, Safe, AND Prosperous New Year as well!

Mac


  _  


  _  


-Original Message- 
From: Bill Bulkeley 
Sent: Dec 23, 2014 11:04 PM 
To: legacy-ornamental-mills@googlegroups.com 
Subject: merry christmas 





Well I’m a little ahead of you guys over there, its Christmas eve here so I’m 
getting in a little early for you all and I don’t care how politicly incorrect 
it is I’m an old fashioned boy

Merry Christmas to all in this group from down under and I hope we all keep 
going posting here for many many more and a very happy and prosperous new year 
for us all

Bill

 

.

-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.




-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.
. 

 

No virus found in this message.
Checked by AVG - www.avg.com
Version: 2015.0.5577 / Virus Database: 4257/8796 - Release Date: 12/23/14

-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

No virus found in this message.
Checked by AVG - www.avg.com
Version: 2015.0.5577 / Virus Database: 4257/8796 - Release Date: 12/23/14

-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: merry christmas

[Okla Mike (Liltwisted)]

Merry Christmas to you as well
God Bless
Mike
OK
On 12/23/2014 10:04 PM, Bill Bulkeley wrote:


Well I’m a little ahead of you guys over there, its Christmas eve here 
so I’m getting in a little early for you all and I don’t care how 
politicly incorrect it is I’m an old fashioned boy


Merry Christmas to all in this group from down under and I hope we all 
keep going posting here for many many more and a very happy and 
prosperous new year for us all


Bill

.

--
You received this message because you are subscribed to the Google 
Groups Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send 
an email to legacy-ornamental-mills+unsubscr...@googlegroups.com 
mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to 
legacy-ornamental-mills@googlegroups.com 
mailto:legacy-ornamental-mills@googlegroups.com.
Visit this group at 
http://groups.google.com/group/legacy-ornamental-mills.

For more options, visit https://groups.google.com/d/optout.


--
You received this message because you are subscribed to the Google Groups Legacy 
Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: merry christmas

[Okla Mike (Liltwisted)]

On 12/23/2014 10:49 PM, mwfos...@earthlink.net wrote:

Bill,

Merry Christmas to you and yours!
As well as to ALL members (active AND lurkers) of our Group.
Also wishing a Happy, Healthy, Safe, AND Prosperous New Year as well!

Mac



-Original Message-
From: Bill Bulkeley
Sent: Dec 23, 2014 11:04 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: merry christmas

Well I’m a little ahead of you guys over there, its Christmas eve
here so I’m getting in a little early for you all and I don’t care
how politicly incorrect it is I’m an old fashioned boy

Merry Christmas to all in this group from down under and I hope we
all keep going posting here for many many more and a very happy
and prosperous new year for us all

Bill

.

-- 
You received this message because you are subscribed to the Google

Groups Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it,
send an email to
legacy-ornamental-mills+unsubscr...@googlegroups.com
mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to
legacy-ornamental-mills@googlegroups.com
mailto:legacy-ornamental-mills@googlegroups.com.
Visit this group at
http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google 
Groups Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send 
an email to legacy-ornamental-mills+unsubscr...@googlegroups.com 
mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to 
legacy-ornamental-mills@googlegroups.com 
mailto:legacy-ornamental-mills@googlegroups.com.
Visit this group at 
http://groups.google.com/group/legacy-ornamental-mills.

For more options, visit https://groups.google.com/d/optout.
. 


--
You received this message because you are subscribed to the Google Groups Legacy 
Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: merry christmas

[curt george]

Merry Christmas Bill.
You did is nice job on the pen. It almost looks like blue Ice. That is a very 
nice present for someone. Good Job,as always ! ;-)
I hope you and the Kids, have a very Merry Christmas this year.

C.A.G.
  - Original Message - 
  From: Bill Bulkeley 
  To: legacy-ornamental-mills@googlegroups.com 
  Sent: Tuesday, December 24, 2013 2:37 AM
  Subject: merry christmas


  Merry Christmas everyone well its Christmas eve here now and I won't get time 
tomorrow with meals too cook and presents and people stopping in, gets very 
hectic every year  so I will wish everyone now while I have a quiet time

  So have a good one everybody and a great new year, 

  Bill

  Ps I made a acrylic pen for one of my presents this year so I thought I would 
post it because it's been a bit quiet of late here sorry it's not very clear 
taken with my phone

   


  -- 
  You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
  To unsubscribe from this group and stop receiving emails from it, send an 
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
  To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
  Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
  For more options, visit https://groups.google.com/groups/opt_out.

-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/groups/opt_out.

RE: merry christmas

[Bill Bulkeley]

Yea it was a nice blank the legacy can do acrylic very well I buff it on the
beall buffing system 

Which works ok on acrylic i just leave out the last step 

Bill

 

From: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of curt george
Sent: Tuesday, 24 December 2013 7:48 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: merry christmas

 

Merry Christmas Bill.

You did is nice job on the pen. It almost looks like blue Ice. That is a
very nice present for someone. Good Job,as always ! ;-)

I hope you and the Kids, have a very Merry Christmas this year.

 

C.A.G.

- Original Message - 

From: Bill Bulkeley mailto:bulke...@mmnet.com.au  

To: legacy-ornamental-mills@googlegroups.com 

Sent: Tuesday, December 24, 2013 2:37 AM

Subject: merry christmas

 

Merry Christmas everyone well its Christmas eve here now and I won't get
time tomorrow with meals too cook and presents and people stopping in, gets
very hectic every year  so I will wish everyone now while I have a quiet
time

So have a good one everybody and a great new year, 

Bill

Ps I made a acrylic pen for one of my presents this year so I thought I
would post it because it's been a bit quiet of late here sorry it's not very
clear taken with my phone

 

-- 
You received this message because you are subscribed to the Google Groups
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to
legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/groups/opt_out.

  _  

No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4259 / Virus Database: 3658/6945 - Release Date: 12/23/13

No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4259 / Virus Database: 3658/6945 - Release Date: 12/23/13

-- 
You received this message because you are subscribed to the Google Groups
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to
legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/groups/opt_out.

-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/groups/opt_out.

RE: merry christmas

[CURTIS GEORGE]

Bill what pitch and router bit did you use? I have not used the Beall buffing 
system, but I have heard a lot of good things about it, HUT turners wax, makes 
a good Acrylic  finish, (that is the Company HUT,  who make turners wax also 
makes a block that works well on Acrylics that hase worked well for me in the 
past.)  Ive only done a few acrylic turning jobs, but I am thinking of doing me 
in the future. ;-)
Have a good day, And Again Merry Christmas.
C.A.G.

- Original Message -
From: Bill Bulkeley bulke...@mmnet.com.au
To: legacy-ornamental-mills@googlegroups.com
Sent: Tue, 24 Dec 2013 04:00:55 -0500 (EST)
Subject: RE: merry christmas



Yea it was a nice blank the legacy can do acrylic very well I buff it on the 
beall buffing system 
Which works ok on acrylic i just leave out the last step 
Bill
 


From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of curt george
Sent: Tuesday, 24 December 2013 7:48 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: merry christmas
 

Merry Christmas Bill.

You did is nice job on the pen. It almost looks like blue Ice. That is a very 
nice present for someone. Good Job,as always ! ;-)

I hope you and the Kids, have a very Merry Christmas this year.

 

C.A.G.


- Original Message - 

From:Bill Bulkeley

To:legacy-ornamental-mills@googlegroups.com

Sent: Tuesday, December 24, 2013 2:37 AM

Subject: merry christmas

 
Merry Christmas everyone well its Christmas eve here now and I won’t get time 
tomorrow with meals too cook and presents and people stopping in, gets very 
hectic every year  so I will wish everyone now while I have a quiet time
So have a good one everybody and a great new year, 
Bill
Ps I made a acrylic pen for one of my presents this year so I thought I would 
post it because it’s been a bit quiet of late here sorry it’s not very clear 
taken with my phone
 
-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/groups/opt_out.



No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4259 / Virus Database: 3658/6945 - Release Date: 12/23/13
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4259 / Virus Database: 3658/6945 - Release Date: 12/23/13
-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/groups/opt_out.
-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/groups/opt_out.

-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/groups/opt_out.

RE: merry christmas

[Bill Bulkeley]

Pretty strait forward strait off the legacy video
http://www.youtube.com/watch?v=hoQ-nuDipUo

½ inch rope bit 1 ½ inch pitch 3 start nothing fancy

Bill

 

From: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE
Sent: Tuesday, 24 December 2013 10:03 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: merry christmas

 

Bill what pitch and router bit did you use? I have not used the Beall
buffing system, but I have heard a lot of good things about it, HUT turners
wax, makes a good Acrylic  finish, (that is the Company HUT,  who make
turners wax also makes a block that works well on Acrylics that hase worked
well for me in the past.)  Ive only done a few acrylic turning jobs, but I
am thinking of doing me in the future. ;-)
Have a good day, And Again Merry Christmas.
C.A.G.

- Original Message -
From: Bill Bulkeley bulke...@mmnet.com.au
To: legacy-ornamental-mills@googlegroups.com
Sent: Tue, 24 Dec 2013 04:00:55 -0500 (EST)
Subject: RE: merry christmas

Yea it was a nice blank the legacy can do acrylic very well I buff it on the
beall buffing system 

Which works ok on acrylic i just leave out the last step 

Bill

 

From: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of curt george
Sent: Tuesday, 24 December 2013 7:48 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: merry christmas

 

Merry Christmas Bill.

You did is nice job on the pen. It almost looks like blue Ice. That is a
very nice present for someone. Good Job,as always ! ;-)

I hope you and the Kids, have a very Merry Christmas this year.

 

C.A.G.

- Original Message - 

From:Bill Bulkeley mailto:bulke...@mmnet.com.au 

To:legacy-ornamental-mills@googlegroups.com

Sent: Tuesday, December 24, 2013 2:37 AM

Subject: merry christmas

 

Merry Christmas everyone well its Christmas eve here now and I won’t get
time tomorrow with meals too cook and presents and people stopping in, gets
very hectic every year  so I will wish everyone now while I have a quiet
time

So have a good one everybody and a great new year, 

Bill

Ps I made a acrylic pen for one of my presents this year so I thought I
would post it because it’s been a bit quiet of late here sorry it’s not very
clear taken with my phone

 

-- 
You received this message because you are subscribed to the Google Groups
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to
legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/groups/opt_out.

  _  

No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4259 / Virus Database: 3658/6945 - Release Date: 12/23/13

No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4259 / Virus Database: 3658/6945 - Release Date: 12/23/13

-- 
You received this message because you are subscribed to the Google Groups
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to
legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/groups/opt_out.

-- 
You received this message because you are subscribed to the Google Groups
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to
legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/groups/opt_out.

  _  

No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4259 / Virus Database: 3658/6945 - Release Date: 12/23/13

No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4259 / Virus Database: 3658/6945 - Release Date: 12/23/13

-- 
You received this message because you are subscribed to the Google Groups
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to
legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/groups/opt_out.

-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy

Re: merry christmas

[Ccm Ccm]

Looks good



On Tuesday, December 24, 2013, Bill Bulkeley wrote:

 Merry Christmas everyone well its Christmas eve here now and I won’t get
 time tomorrow with meals too cook and presents and people stopping in, gets
 very hectic every year  so I will wish everyone now while I have a quiet
 time

 So have a good one everybody and a great new year,

 Bill

 Ps I made a acrylic pen for one of my presents this year so I thought I
 would post it because it’s been a bit quiet of late here sorry it’s not
 very clear taken with my phone



 --
 You received this message because you are subscribed to the Google Groups
 Legacy Ornamental Mills group.
 To unsubscribe from this group and stop receiving emails from it, send an
 email to 
 legacy-ornamental-mills+unsubscr...@googlegroups.comjavascript:_e({}, 'cvml',
 'legacy-ornamental-mills%2bunsubscr...@googlegroups.com');.
 To post to this group, send email to
 legacy-ornamental-mills@googlegroups.com javascript:_e({}, 'cvml',
 'legacy-ornamental-mills@googlegroups.com');.
 Visit this group at http://groups.google.com/group/legacy-ornamental-mills
 .
 For more options, visit https://groups.google.com/groups/opt_out.


-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/groups/opt_out.

Re: merry christmas

[Okla Mike (Liltwisted)]

Merry Christmas to one and all.
Mike
OK
On 12/24/2013 1:37 AM, Bill Bulkeley wrote:


Merry Christmas everyone well its Christmas eve here now and I won't 
get time tomorrow with meals too cook and presents and people stopping 
in, gets very hectic every year  so I will wish everyone now while I 
have a quiet time


So have a good one everybody and a great new year,

Bill

Ps I made a acrylic pen for one of my presents this year so I thought 
I would post it because it's been a bit quiet of late here sorry it's 
not very clear taken with my phone


--
You received this message because you are subscribed to the Google 
Groups Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send 
an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to 
legacy-ornamental-mills@googlegroups.com.
Visit this group at 
http://groups.google.com/group/legacy-ornamental-mills.

For more options, visit https://groups.google.com/groups/opt_out.


--
You received this message because you are subscribed to the Google Groups Legacy 
Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/groups/opt_out.

Re: merry Christmas

[curt george]

Thank you Bill.
Merry Christmas to you and your family as well.
C.A.G.
  - Original Message - 
  From: Bill Bulkeley 
  To: legacy-ornamental-mills@googlegroups.com 
  Sent: Sunday, December 23, 2012 10:02 PM
  Subject: merry Christmas


  Im going to be very busy with family and preperations for Christmas day being 
a single dad of 4 and with all their friends joining us for Christmas dinner I 
might not get time online over the next 24 to 48 hours so 

  Merry Christmas to all the legacy owners out there from here down under and a 
very happy and prosperous new year to us all 

  Bill 


  -- 
  You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
  To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
  To unsubscribe from this group, send email to 
legacy-ornamental-mills+unsubscr...@googlegroups.com.
  Visit this group at 
http://groups.google.com/group/legacy-ornamental-mills?hl=en.
  For more options, visit https://groups.google.com/groups/opt_out.
   
   

-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
To unsubscribe from this group, send email to 
legacy-ornamental-mills+unsubscr...@googlegroups.com.
Visit this group at 
http://groups.google.com/group/legacy-ornamental-mills?hl=en.
For more options, visit https://groups.google.com/groups/opt_out.

Re: merry christmas

[curt george]

And to yo as well Bill! 
Merry Christmas,

C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
To unsubscribe from this group, send email to 
legacy-ornamental-mills+unsubscr...@googlegroups.com.
For more options, visit this group at 
http://groups.google.com/group/legacy-ornamental-mills?hl=en.

christmas1-antique-sleigh.jpg

Re: merry christmas

[James Edgell]

merry christmas to you and your family also mr bill, i hear santa use`s
kangaroos to pull his sleigh down under, lol, hows that working out?



On Sat, Dec 24, 2011 at 3:04 AM, curt george curtgeo...@wowway.com wrote:

 **
 And to yo as well Bill!
 Merry Christmas,

 C.A.G.

 --
 You received this message because you are subscribed to the Google Groups
 Legacy Ornamental Mills group.
 To post to this group, send email to
 legacy-ornamental-mills@googlegroups.com.
 To unsubscribe from this group, send email to
 legacy-ornamental-mills+unsubscr...@googlegroups.com.
 For more options, visit this group at
 http://groups.google.com/group/legacy-ornamental-mills?hl=en.


-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
To unsubscribe from this group, send email to 
legacy-ornamental-mills+unsubscr...@googlegroups.com.
For more options, visit this group at 
http://groups.google.com/group/legacy-ornamental-mills?hl=en.

christmas1-antique-sleigh.jpg

Re: merry christmas

[Bill Bulkeley]

yes that's actually true some families tell their kids this, the kangaroos are 
the big red ones and are called boomers
but its white ones that pull the sleigh
there is even a song called 6 white boomers

http://www.youtube.com/watch?v=2FdVXca9hys

enjoy from down under

Bill



  - Original Message - 
  From: James Edgell 
  To: legacy-ornamental-mills@googlegroups.com 
  Sent: Sunday, December 25, 2011 2:01 AM
  Subject: Re: merry christmas


  merry christmas to you and your family also mr bill, i hear santa use`s 
kangaroos to pull his sleigh down under, lol, hows that working out?


   
  On Sat, Dec 24, 2011 at 3:04 AM, curt george curtgeo...@wowway.com wrote:

And to yo as well Bill! 
Merry Christmas,

C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To post to this group, send email to 
legacy-ornamental-mills@googlegroups.com.
To unsubscribe from this group, send email to 
legacy-ornamental-mills+unsubscr...@googlegroups.com.
For more options, visit this group at 
http://groups.google.com/group/legacy-ornamental-mills?hl=en.




  -- 
  You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
  To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
  To unsubscribe from this group, send email to 
legacy-ornamental-mills+unsubscr...@googlegroups.com.
  For more options, visit this group at 
http://groups.google.com/group/legacy-ornamental-mills?hl=en.

  No virus found in this message.
  Checked by AVG - www.avg.com
  Version: 2012.0.1901 / Virus Database: 2109/4699 - Release Date: 12/23/11

-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
To unsubscribe from this group, send email to 
legacy-ornamental-mills+unsubscr...@googlegroups.com.
For more options, visit this group at 
http://groups.google.com/group/legacy-ornamental-mills?hl=en.

Re: Merry Christmas to all

[Bill Bulkeley]

Merry Christmas to all on this group from down under been a great year glade to 
see some new members posting



Bill

 




- Original Message - 
From: SteveEJ s.jacobs0...@gmail.com
To: Legacy Ornamental Mills legacy-ornamental-mills@googlegroups.com
Sent: Friday, December 24, 2010 10:41 AM
Subject: Re: Merry Christmas to all


Merry Christmas Everybody!

Happy Birthday Jesus!

Steve

On Dec 23, 6:41 am, Craig Turner craig1...@fsmail.net wrote:
 Hi Carl,

 I am flying to Edinburgh where I was born and bred. Miss it so much,
 but saying that I live near Dublin in Ireland, so it is only an hour's
 flight. I've been to Dunoon and it is a beautiful little town. The
 ferry from Oban to Dunoon is a great trip (when the weather is fine).
 Back to woodworking, have the camera with me and will be watchful for
 any nice inspiring projects just as Curt suggested. Will upload
 anything interesting I find worthy of the group. Am about to leave for
 the airport - so wish you well and best wishes for the new year.

 Craig

 10 Dec 23, 4:44 am, carstenstig...@verizon.net wrote:

  Craig, Bless you, where in Scotland are you going? I lived in Dunnon for a 
  number of years and miss it greatly. I loved the Highlands and the games. 
  Really miss the pub meals and the great people. In His Service
  Carl StigersWWW.treetothee.com

  On 12/22/10,Craig Turnercraig1...@fsmail.netwrote:Hi all,
  This is just a short note to wish a very merry Christmas and new year
  to everyone in this group who all enjoy the wonders of the Legacy
  Ornamental Mill (or have just bought one and are impatient to get
  started). I am flying out to Scotland tomorrow (snow permitting at the
  airports) to spend this time with family and friends and wont really
  have access to this group until I return. I look forward to lots of
  projects, problem solving and general interaction in this group next
  year. For those members around the world who do not celebrate
  Christmas I wish you and your families all the best for the coming
  year. Good health to all.
  --
  You received this message because you are subscribed to the Google Groups 
  Legacy Ornamental Mills group.
  To post to this group, send email 
  tolegacy-ornamental-mi...@googlegroups.com.
  To unsubscribe from this group, send email 
  tolegacy-ornamental-mills+unsubscr...@googlegroups.com.
  For more options, visit this group 
  athttp://groups.google.com/group/legacy-ornamental-mills?hl=en.

-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To post to this group, send email to legacy-ornamental-mi...@googlegroups.com.
To unsubscribe from this group, send email to 
legacy-ornamental-mills+unsubscr...@googlegroups.com.
For more options, visit this group at 
http://groups.google.com/group/legacy-ornamental-mills?hl=en.

-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To post to this group, send email to legacy-ornamental-mi...@googlegroups.com.
To unsubscribe from this group, send email to 
legacy-ornamental-mills+unsubscr...@googlegroups.com.
For more options, visit this group at 
http://groups.google.com/group/legacy-ornamental-mills?hl=en.

Re: Merry Christmas to all

[curt george]

Thank you Craig!
Merry Christmas too.
Have a good time with your family, While in Scotland, If you see any neat 
kinds of woodworks, Please take some pictures of them. I think of it as 
inspiration for future projects.


Take care. and Im looking forward to talking to you more, Next year.
C.A.G.
- Original Message - 
From: Craig Turner craig1...@fsmail.net

To: Legacy Ornamental Mills legacy-ornamental-mills@googlegroups.com
Sent: Wednesday, December 22, 2010 3:13 PM
Subject: Merry Christmas to all



Hi all,

This is just a short note to wish a very merry Christmas and new year
to everyone in this group who all enjoy the wonders of the Legacy
Ornamental Mill (or have just bought one and are impatient to get
started). I am flying out to Scotland tomorrow (snow permitting at the
airports) to spend this time with family and friends and wont really
have access to this group until I return. I look forward to lots of
projects, problem solving and general interaction in this group next
year. For those members around the world who do not celebrate
Christmas I wish you and your families all the best for the coming
year. Good health to all.

--
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To post to this group, send email to 
legacy-ornamental-mi...@googlegroups.com.
To unsubscribe from this group, send email to 
legacy-ornamental-mills+unsubscr...@googlegroups.com.
For more options, visit this group at 
http://groups.google.com/group/legacy-ornamental-mills?hl=en.




--
You received this message because you are subscribed to the Google Groups Legacy 
Ornamental Mills group.
To post to this group, send email to legacy-ornamental-mi...@googlegroups.com.
To unsubscribe from this group, send email to 
legacy-ornamental-mills+unsubscr...@googlegroups.com.
For more options, visit this group at 
http://groups.google.com/group/legacy-ornamental-mills?hl=en.

Re: Merry Christmas to all

[carstenstigers]

Craig, Bless you, where in Scotland are you going? I lived in Dunnon for a number of years and miss it greatly. I loved the Highlands and the games. Really miss the pub meals and the great people. In His Service Carl Stigers WWW.treetothee.com On 12/22/10, Craig Turnercraig1...@fsmail.net wrote:Hi all,This is just a short note to wish a very merry Christmas and new yearto everyone in this group who all enjoy the wonders of the LegacyOrnamental Mill (or have just bought one and are impatient to getstarted). I am flying out to Scotland tomorrow (snow permitting at theairports) to spend this time with family and friends and wont reallyhave access to this group until I return. I look forward to lots ofprojects, problem solving and general interaction in this group nextyear. For those members around the world who do not celebrateChristmas I wish you and your families all the best for the comingyear. Good health to all.-- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group.To post to this group, send email to legacy-ornamental-mills@googlegroups.com.To unsubscribe from this group, send email to legacy-ornamental-mills+unsubscr...@googlegroups.com.For more options, visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en.



-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To post to this group, send email to legacy-ornamental-mi...@googlegroups.com.
To unsubscribe from this group, send email to legacy-ornamental-mills+unsubscr...@googlegroups.com.

For more options, visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en.