Re: V2.14.0 - midi volume midi arpeggio
On 10. juni 2011 13:55, MING TSANG wrote: Thank you Helge Hafting, Janek Warchol, Federico Bruni for helping me to use terminal commands in ubuntu. I downloaded the right file - dir shows it. Now I copied the error - see below: It goes wrong because the filenames are still different: $ dir lilypond-2.14.0-1.linux-x86.sh $ sh lilypond-2.14.0-linux-x86.sh sh: Can't open lilypond-2.14.0-linux-x86.sh You lost/forgot the number 1 and a dot. You have got some tips on using TAB completion, but that might fail if there are several lilypond files there. If the filename is hard to type correctly, use cut paste instead. First use ls (or dir) to get a list of filenames. Then type the command sh followed by a space. Then use the mouse to mark the filename then press the middle button (or right+left simultaneously) linux should now paste the filename into the command you are typing. Finally, press enter to execute the command. Helge Hafting ___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
Re: V2.14.0 - midi volume midi arpeggio
Thank you very much for the terminal tips. It helps. From: Helge Hafting helge.haft...@hist.no To: MING TSANG tsan...@rogers.com Cc: lilypond-user@gnu.org Sent: Thu, June 16, 2011 4:58:18 AM Subject: Re: V2.14.0 - midi volume midi arpeggio On 10. juni 2011 13:55, MING TSANG wrote: Thank you Helge Hafting, Janek Warchol, Federico Bruni for helping me to use terminal commands in ubuntu. I downloaded the right file - dir shows it. Now I copied the error - see below: It goes wrong because the filenames are still different: $ dir lilypond-2.14.0-1.linux-x86.sh $ sh lilypond-2.14.0-linux-x86.sh sh: Can't open lilypond-2.14.0-linux-x86.sh You lost/forgot the number 1 and a dot. You have got some tips on using TAB completion, but that might fail if there are several lilypond files there. If the filename is hard to type correctly, use cut paste instead. First use ls (or dir) to get a list of filenames. Then type the command sh followed by a space. Then use the mouse to mark the filename then press the middle button (or right+left simultaneously) linux should now paste the filename into the command you are typing. Finally, press enter to execute the command. Helge Hafting ___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
RE: V2.14.0 - midi volume midi arpeggio
Ming, From: MING TSANG [mailto:tsan...@rogers.com] Sent: 15 June 2011 02:49 To: David Santamauro; James Lowe; Federico Bruni Cc: lilypond-user@gnu.org Subject: Re: V2.14.0 - midi volume midi arpeggio david, James Federico :Thank you all for the tips. It cut down my learning curve. Federico: Thank you for pointing to the ubuntu forum. I registered to the forum to-night. I will start learning. I want to use frescoboldi to generate music score. That is the reason I install ubuntu. [James' reply:]I do not want to confuse you but are you aware of an Ubuntu Distribution that has been made especially for Visually Impaired people http://vinuxproject.org/ I expect this would work with Frescobaldi too but might offer a more useful Linux Distribution for you. James ___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
Re: V2.14.0 - midi volume midi arpeggio
Colin: Thank you or the png. My Frescobaldi does show lilypond preference button (icon), So I conclude that your version is not the same as mime. my is v1.0.2. I used ubuntu software centre to install frescobaldi. I guess your is v1.2.0. So I download frescobaldi-v1.2.0.tar.gz; then I extract the file. At a terminal, I type cmake, I get: tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ cmake The program 'cmake' is currently not installed. You can install it by typing: sudo apt-get install cmake tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ sudo apt-get install make [sudo] password for tsang: Reading package lists... Done Building dependency tree Reading state information... Done make is already the newest version. The following packages were automatically installed and are no longer required: qjackctl jackd2 jackd2-firewire libffado2 libxml++2.6-2 Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 324 not upgraded. tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ ./run bash: ./run: No such file or directory tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ cmake . The program 'cmake' is currently not installed. You can install it by typing: sudo apt-get install cmake tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ According to install text file I type ./run and it says no such file. I did cmake . and it complain cmake is not installed. (please note the terminal disi say it was installed.) Now I am stuck. Don't know what to do. Is there a simpler way to install frescobaldi (like ubuntu software centre)? How can I get ubuntu upgrade to install the newest frescobaldi? Thank you for your help. From: Colin Campbell c...@shaw.ca To: MING TSANG tsan...@rogers.com Cc: lilypond-user@gnu.org Sent: Tue, June 14, 2011 12:34:28 AM Subject: Re: V2.14.0 - midi volume midi arpeggio On 11-06-13 09:46 AM, MING TSANG wrote: Thank you. I discovered that once I change configue-frescobali/pathboth icon use the same version v2.14.1 I follow you instruction and have trouble running v2.12.3. I've attached a screen shot which might help explain what I mean, Ming. Of course, you need to have each of the listed versions of lilypond installed, but the shot shows that I can create scores in several versions, using the same instance of Frescobaldi, and indeed (with a shout out to Wilbert) this is one of its best features. Colin -- A chief event of life is the day in which we have encountered a mind that startled us. -Ralph Waldo Emerson, writer and philosopher (1803-1882) ___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
Re: V2.14.0 - midi volume midi arpeggio
On 11-06-14 06:56 AM, MING TSANG wrote: Colin: Thank you or the png. My Frescobaldi does show lilypond preference button (icon), So I conclude that your version is not the same as mime. my is v1.0.2. I used ubuntu software centre to install frescobaldi. I guess your is v1.2.0. So I download frescobaldi-v1.2.0.tar.gz; then I extract the file. At a terminal, I type cmake, I get*: tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ cmake The program 'cmake' is currently not installed. You can install it by typing: sudo apt-get install cmake tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ sudo apt-get install make * This is where your finger slipped, Ming: in the line above, you installed make instead of cmake. *[sudo] password for tsang: Reading package lists... Done Building dependency tree Reading state information... Done make is already the newest version. The following packages were automatically installed and are no longer required: qjackctl jackd2 jackd2-firewire libffado2 libxml++2.6-2 Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 324 not upgraded. tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ ./run bash: ./run: No such file or directory tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ cmake . The program 'cmake' is currently not installed. You can install it by typing: sudo apt-get install cmake tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ *According to install text file I type ./run and it says no such file. I did cmake . and it complain cmake is not installed. (please note the terminal disi say it was installed.) Now I am stuck. Don't know what to do. Is there a simpler way to install frescobaldi (like ubuntu software centre)?* *How can I get ubuntu upgrade to install the newest frescobaldi?* *Thank you for your help.* * I've just checked: it looks as though the version in the Ubuntu repositories is now 1.2.0 so that would be your best way to go. Colin -- A chief event of life is the day in which we have encountered a mind that startled us. -Ralph Waldo Emerson, writer and philosopher (1803-1882) ___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
Re: V2.14.0 - midi volume midi arpeggio
Colin: I type sudo apt-get install make instrad of cmake. I redo sudo and I get the following: tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ sudo apt-get install cmake [sudo] password for tsang: Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: qjackctl jackd2 jackd2-firewire libffado2 libxml++2.6-2 Use 'apt-get autoremove' to remove them. The following extra packages will be installed: cmake-data emacsen-common libxmlrpc-core-c3 The following NEW packages will be installed: cmake cmake-data emacsen-common libxmlrpc-core-c3 0 upgraded, 4 newly installed, 0 to remove and 324 not upgraded. Need to get 4,833kB of archives. After this operation, 14.0MB of additional disk space will be used. Do you want to continue [Y/n]? y Get:1 http://ca.archive.ubuntu.com/ubuntu/ maverick/main libxmlrpc-core-c3 i386 1.06.27-1ubuntu7 [89.6kB] Get:2 http://ca.archive.ubuntu.com/ubuntu/ maverick/main emacsen-common all 1.4.19ubuntu1 [19.0kB] Get:3 http://ca.archive.ubuntu.com/ubuntu/ maverick-updates/main cmake-data all 2.8.2-2ubuntu0.1 [653kB] Get:4 http://ca.archive.ubuntu.com/ubuntu/ maverick-updates/main cmake i386 2.8.2-2ubuntu0.1 [4,072kB] Fetched 4,833kB in 23s (207kB/s) Selecting previously deselected package libxmlrpc-core-c3. (Reading database ... 211323 files and directories currently installed.) Unpacking libxmlrpc-core-c3 (from .../libxmlrpc-core-c3_1.06.27-1ubuntu7_i386.deb) ... Selecting previously deselected package emacsen-common. Unpacking emacsen-common (from .../emacsen-common_1.4.19ubuntu1_all.deb) ... Selecting previously deselected package cmake-data. Unpacking cmake-data (from .../cmake-data_2.8.2-2ubuntu0.1_all.deb) ... Selecting previously deselected package cmake. Unpacking cmake (from .../cmake_2.8.2-2ubuntu0.1_i386.deb) ... Processing triggers for man-db ... Setting up libxmlrpc-core-c3 (1.06.27-1ubuntu7) ... Setting up emacsen-common (1.4.19ubuntu1) ... emacsen-common: Handling install of emacsen flavor emacs Setting up cmake-data (2.8.2-2ubuntu0.1) ... emacsen-common: Handling install of emacsen flavor emacs Setting up cmake (2.8.2-2ubuntu0.1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ ./run bash: ./run: No such file or directory tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ cmake . CMake Error: The source directory /home/tsang does not appear to contain CMakeLists.txt. Specify --help for usage, or press the help button on the CMake GUI. tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ cMake . No command 'cMake' found, did you mean: Command 'cake' from package 'cakephp-scripts' (universe) Command 'cmake' from package 'cmake' (main) cMake: command not found tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ From: MING TSANG tsan...@rogers.com To: Colin Campbell c...@shaw.ca Cc: lilypond-user@gnu.org Sent: Tue, June 14, 2011 8:56:47 AM Subject: Re: V2.14.0 - midi volume midi arpeggio Colin: Thank you or the png. My Frescobaldi does show lilypond preference button (icon), So I conclude that your version is not the same as mime. my is v1.0.2. I used ubuntu software centre to install frescobaldi. I guess your is v1.2.0. So I download frescobaldi-v1.2.0.tar.gz; then I extract the file. At a terminal, I type cmake, I get: tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ cmake The program 'cmake' is currently not installed. You can install it by typing: sudo apt-get install cmake tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ sudo apt-get install make [sudo] password for tsang: Reading package lists... Done Building dependency tree Reading state information... Done make is already the newest version. The following packages were automatically installed and are no longer required: qjackctl jackd2 jackd2-firewire libffado2 libxml++2.6-2 Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 324 not upgraded. tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ ./run bash: ./run: No such file or directory tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ cmake . The program 'cmake' is currently not installed. You can install it by typing: sudo apt-get install cmake tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ According to install text file I type ./run and it says no such file. I did cmake . and it complain cmake is not installed. (please note the terminal disi say it was installed.) Now I am stuck. Don't know what to do. Is there a simpler way to install frescobaldi (like ubuntu software centre)? How can I get ubuntu upgrade to install the newest frescobaldi? Thank you for your help. From: Colin Campbell c...@shaw.ca To: MING TSANG tsan...@rogers.com Cc: lilypond-user@gnu.org Sent: Tue, June 14, 2011 12:34:28 AM Subject: Re: V2.14.0 - midi
Re: V2.14.0 - midi volume midi arpeggio
under ubuntu software centre, I remove and install fresbaldi. The frescobaldi still show 1.0.2 How can I get ubuntu sfotware centre upgrade so that it will install frescobaldi 1.2.0? From: Colin Campbell c...@shaw.ca To: MING TSANG tsan...@rogers.com Cc: lilypond-user@gnu.org Sent: Tue, June 14, 2011 9:08:13 AM Subject: Re: V2.14.0 - midi volume midi arpeggio On 11-06-14 06:56 AM, MING TSANG wrote: Colin: Thank you or the png. My Frescobaldi does show lilypond preference button (icon), So I conclude that your version is not the same as mime. my is v1.0.2. I used ubuntu software centre to install frescobaldi. I guess your is v1.2.0. So I download frescobaldi-v1.2.0.tar.gz; then I extract the file. At a terminal, I type cmake, I get: tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ cmake The program 'cmake' is currently not installed. You can install it by typing: sudo apt-get install cmake tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ sudo apt-get install make This is where your finger slipped, Ming: in the line above, you installed make instead of cmake. [sudo] password for tsang: Reading package lists... Done Building dependency tree Reading state information... Done make is already the newest version. The following packages were automatically installed and are no longer required: qjackctl jackd2 jackd2-firewire libffado2 libxml++2.6-2 Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 324 not upgraded. tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ ./run bash: ./run: No such file or directory tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ cmake . The program 'cmake' is currently not installed. You can install it by typing: sudo apt-get install cmake tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ According to install text file I type ./run and it says no such file. I did cmake . and it complain cmake is not installed. (please note the terminal disi say it was installed.) Now I am stuck. Don't know what to do. Is there a simpler way to install frescobaldi (like ubuntu software centre)? How can I get ubuntu upgrade to install the newest frescobaldi? Thank you for your help. I've just checked: it looks as though the version in the Ubuntu repositories is now 1.2.0 so that would be your best way to go. Colin -- A chief event of life is the day in which we have encountered a mind that startled us. -Ralph Waldo Emerson, writer and philosopher (1803-1882) ___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
Re: V2.14.0 - midi volume midi arpeggio
2011/6/14 MING TSANG tsan...@rogers.com under ubuntu software centre, I remove and install fresbaldi. The frescobaldi still show 1.0.2 How can I get ubuntu sfotware centre upgrade so that it will install frescobaldi 1.2.0? -- Frescobaldi 1.20 is in Ubuntu Natty. Ubuntu Maverick, the version you are using, has Frescobaldi 1.0.2 So what's happening is normal. Next time check this website: http://packages.ubuntu.com/ I don't know if there is a .deb package of 1.2.0 somewhere. This PPA seems dropped: https://launchpad.net/~frescobaldi/+archive/ppa I would try to compile it from source. 1) install the dependencies. The easiest way to get the dependencies is this command: sudo apt-get build-dep frescobaldi (hopefully, the dependencies for 1.0.2 are the same for 1.2.0) 2) compilation cmake must be launched when your working directory is the directory of Frescobaldi sources. If you use Ubuntu (and therefore Gnome), install this package: nautilus-open-terminal Then you can use the file manager (nautilus) to go to the Frescobaldi sources directory, right-click and choose Open in terminal. Then you can try running cmake. Tutorial you may want to read: https://help.ubuntu.com/community/UsingTheTerminal Good luck, Federico ___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
Re: V2.14.0 - midi volume midi arpeggio
I have a hard time to upgrade frescobaldi from 1.0.2 to 1.2.0. As a last resort I upgrade ubuntu from 10.04 to 11.04. After laboring 4 hours, the updrade is done. Now frescobaldi is v1.2.0. Questions: How can I locate the full path for lilypond 2.12.3 if it still there? How to install lilypond v2.15.1? Will the install of v2.15.1 override v2.14.1? From: Federico Bruni fedel...@gmail.com To: MING TSANG tsan...@rogers.com Cc: Colin Campbell c...@shaw.ca; lilypond-user@gnu.org Sent: Tue, June 14, 2011 10:45:41 AM Subject: Re: V2.14.0 - midi volume midi arpeggio 2011/6/14 MING TSANG tsan...@rogers.com under ubuntu software centre, I remove and install fresbaldi. The frescobaldi still show 1.0.2 How can I get ubuntu sfotware centre upgrade so that it will install frescobaldi 1.2.0? Frescobaldi 1.20 is in Ubuntu Natty. Ubuntu Maverick, the version you are using, has Frescobaldi 1.0.2 So what's happening is normal. Next time check this website: http://packages.ubuntu.com/ I don't know if there is a .deb package of 1.2.0 somewhere. This PPA seems dropped: https://launchpad.net/~frescobaldi/+archive/ppa I would try to compile it from source. 1) install the dependencies. The easiest way to get the dependencies is this command: sudo apt-get build-dep frescobaldi (hopefully, the dependencies for 1.0.2 are the same for 1.2.0) 2) compilation cmake must be launched when your working directory is the directory of Frescobaldi sources. If you use Ubuntu (and therefore Gnome), install this package: nautilus-open-terminal Then you can use the file manager (nautilus) to go to the Frescobaldi sources directory, right-click and choose Open in terminal. Then you can try running cmake. Tutorial you may want to read: https://help.ubuntu.com/community/UsingTheTerminal Good luck, Federico ___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
Re: V2.14.0 - midi volume midi arpeggio
Questions: How can I locate the full path for lilypond 2.12.3 if it still there? Type in a terminal: which -a lilypond You'll see all the lilypond binaries **that are installed in your path**. In order to see which directories are included in the path variable, type in a terminal: echo $PATH I guess that v2.12.3 is in /usr/bin. Please paste the output of previous command (echo $PATH). If I remember correctly, you missed /home/tsang/bin and there was also some strange path. How to install lilypond v2.15.1? Will the install of v2.15.1 override v2.14.1? You can install it as you installed v2.14.1. It won't override the previous installation if you choose a different path. The easiest way is installing as root: sudo sh lilypond-2.15.1-1.linux-x86.sh It will be installed in /usr/local For example I have: $ which -a lilypond /home/fede/bin/lilypond /usr/local/bin/lilypond /usr/bin/lilypond $ echo $PATH /home/fede/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games As you can see, my first lilypond binary is /home/fede/bin/lilypond because /home/fede/bin is the first path. That means that if I type: lilypond /home/fede/bin/lilypond will be actually executed In order to use the other binaries in the terminal, I must specify the absolute path: /usr/local/bin/lilypond HTH, Federico ___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
Re: V2.14.0 - midi volume midi arpeggio
Federico: Thank you very much for your help. Now I have configure frescobaldi to run v2.12.3 and v2.14.1. Now I can go back to code lilypond scores. I will soon start to play the development v2.15.1 when I have spare time. I had been using jedit in window 7, but only one version of lilypond. Now frescobaldi ubuntu provide different version of lilypond to run - an excellent software. Thank you for the tips on terminal commands. This is my first month of using linux ubuntu. What is the difference between sh and sudo sh? Blessing, Ming. From: Federico Bruni fedel...@gmail.com To: MING TSANG tsan...@rogers.com Cc: Colin Campbell c...@shaw.ca; lilypond-user@gnu.org Sent: Tue, June 14, 2011 3:11:11 PM Subject: Re: V2.14.0 - midi volume midi arpeggio Questions: How can I locate the full path for lilypond 2.12.3 if it still there? Type in a terminal: which -a lilypond You'll see all the lilypond binaries **that are installed in your path**. In order to see which directories are included in the path variable, type in a terminal: echo $PATH I guess that v2.12.3 is in /usr/bin. Please paste the output of previous command (echo $PATH). If I remember correctly, you missed /home/tsang/bin and there was also some strange path. How to install lilypond v2.15.1? Will the install of v2.15.1 override v2.14.1? You can install it as you installed v2.14.1. It won't override the previous installation if you choose a different path. The easiest way is installing as root: sudo sh lilypond-2.15.1-1.linux-x86.sh It will be installed in /usr/local For example I have: $ which -a lilypond /home/fede/bin/lilypond /usr/local/bin/lilypond /usr/bin/lilypond $ echo $PATH /home/fede/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games As you can see, my first lilypond binary is /home/fede/bin/lilypond because /home/fede/bin is the first path. That means that if I type: lilypond /home/fede/bin/lilypond will be actually executed In order to use the other binaries in the terminal, I must specify the absolute path: /usr/local/bin/lilypond HTH, Federico___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
Re: V2.14.0 - midi volume midi arpeggio
Il giorno mar, 14/06/2011 alle 13.00 -0700, MING TSANG ha scritto: Thank you very much for your help. Now I have configure frescobaldi to run v2.12.3 and v2.14.1. Now I can go back to code lilypond scores. I will soon start to play the development v2.15.1 when I have spare time. I had been using jedit in window 7, but only one version of lilypond. Now frescobaldi ubuntu provide different version of lilypond to run - an excellent software. great, I'm glad that you managed to make it work Thank you for the tips on terminal commands. This is my first month of using linux ubuntu. What is the difference between sh and sudo sh? in ubuntu sudo is the command that allows a normal user to get the privileges of the superuser (also known as root user) for example, only root can write in /usr/local But this is not the best place to discuss these issues. I recommend you to subscribe to a forum or mailing list of ubuntu users and ask there, for example: http://ubuntuforums.org/ And try to do some search before asking. This should be a good place to start: https://help.ubuntu.com/ Cheers, Federico ___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
Re: V2.14.0 - midi volume midi arpeggio
On Tue, 14 Jun 2011 13:00:17 -0700 (PDT)
MING TSANG tsan...@rogers.com wrote:
of using linux ubuntu. What is the difference between sh and sudo sh?
think of sudo command as the equivalent of Run As Administrator. It
turns you into administrator ('root') and executes that command. To
understand it, type the following commands into a terminal and it
should look like:
$ whoami
tsang
$ sudo whoami
root
The greatest command, though, is 'man'. It is help for every command
and is invoked like
$ man whoami
* q to quit
$ man sudo
* q to quit
David
___
lilypond-user mailing list
lilypond-user@gnu.org
https://lists.gnu.org/mailman/listinfo/lilypond-user
RE: V2.14.0 - midi volume midi arpeggio
Ming From: lilypond-user-bounces+james.lowe=datacore@gnu.org [lilypond-user-bounces+james.lowe=datacore@gnu.org] on behalf of MING TSANG [tsan...@rogers.com] Sent: 14 June 2011 21:00 To: Federico Bruni Cc: lilypond-user@gnu.org Subject: Re: V2.14.0 - midi volume midi arpeggio Federico: Thank you very much for your help. Now I have configure frescobaldi to run v2.12.3 and v2.14.1. Now I can go back to code lilypond scores. I will soon start to play the development v2.15.1 when I have spare time. I had been using jedit in window 7, but only one version of lilypond. Now frescobaldi ubuntu provide different version of lilypond to run - an excellent software. Thank you for the tips on terminal commands. This is my first month of using linux ubuntu. What is the difference between sh and sudo sh? Blessing, Ming. -- Certain commands in Ubuntu require 'administrator' permissions as the 'sh' command needs to access areas of the operating system that a normal user does not have permissions for. So when you run any command with the additional 'sudo' command before it, it tells Ubuntu that the command is to be run 'as if' you were logged in as the administrator (or 'root' as is more commonly known in Linux) - 'su' actually stands for 'super user' and (I think) the 'do' is literal as in 'super user do' [command], but that is not important. There will be others that might jump in to say that you can also use sudo command for non-administrator accounts (which is true) but for your case this is what it is used for. WHat is important is that any command you run with 'sudo' before it requires your password to be entered before the command is executed. This is just a simple security feature of Ubuntu that stops 'anyone' or 'any process' from running as 'root' without entering a password. Ubuntu is slightly different from other Linux versions/distributions because it does not by default allow you to log in as 'root', so any commands that require this kind of 'extra' privilege simply make you enter your password as verification. If you try to run a command that requires 'sudo' without typing the command in, the prompt will tell you...something like 'permission denied' or 'you need to be 'root' to do that'. I hope that helps. James PS if you ever want to know what a command does or means you can simply type 'man' and then the command for example 'man sudo' or you can also type 'info sudo' which will give you a slightly different (but often more updated) help system. PPS if you do use 'man' or 'info' type the space bar to 'page down' or the 'return button' to go a line at a time. Finally to 'come out' of the man or info page, type 'q' (for quit) and it will take you back to the prompt. Happy Hacking! ___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
Re: V2.14.0 - midi volume midi arpeggio
david, James Federico :Thank you all for the tips. It cut down my learning
curve.
Federico: Thank you for pointing to the ubuntu forum. I registered to the forum
to-night. I will start learning. I want to use frescoboldi to generate music
score. That is the reason I install ubuntu.
From: David Santamauro david.santama...@gmail.com
To: MING TSANG tsan...@rogers.com
Cc: Federico Bruni fedel...@gmail.com; lilypond-user@gnu.org
Sent: Tue, June 14, 2011 4:56:21 PM
Subject: Re: V2.14.0 - midi volume midi arpeggio
On Tue, 14 Jun 2011 13:00:17 -0700 (PDT)
MING TSANG tsan...@rogers.com wrote:
of using linux ubuntu. What is the difference between sh and sudo sh?
think of sudo command as the equivalent of Run As Administrator. It
turns you into administrator ('root') and executes that command. To
understand it, type the following commands into a terminal and it
should look like:
$ whoami
tsang
$ sudo whoami
root
The greatest command, though, is 'man'. It is help for every command
and is invoked like
$ man whoami
* q to quit
$ man sudo
* q to quit
David___
lilypond-user mailing list
lilypond-user@gnu.org
https://lists.gnu.org/mailman/listinfo/lilypond-user
Re: V2.14.0 - midi volume midi arpeggio
Thank you. I discovered that once I change configue-frescobali/path both icon use the same version v2.14.1 I follow you instruction and have trouble running v2.12.3. From: Colin Campbell c...@shaw.ca To: MING TSANG tsan...@rogers.com Cc: lilypond-user@gnu.org Sent: Sat, June 11, 2011 11:05:58 AM Subject: Re: V2.14.0 - midi volume midi arpeggio On 11-06-11 05:39 AM, MING TSANG wrote: Colin : Thank you very much. Now I have two icon for frescobaldi - one for each version (2.12.3 2.14.0). Federico; David; janek; Helge : Thank you all for helping / (showing pointers to) me on frescobaldi/lilypond setup/install the past few days. It is fruitful and I am very much appreciated. I am very new to linux world. Actually, Ming, you only need one icon for Frescobaldi. As I mentioned, Frescobaldi lets you add several versions of Lilypond in the Preferences area, and set only one of them as default. The extra check box allows you to create scores in, for example 2.12.3, and Frescobaldi will see the \version 2.12.3 and use that version of Lilypond, if you have it installed. You can also have 2.14 installed and listed in Frescobaldi, and again, Frescobaldi will use whichever Lilypond matches the \version in your score. Welcome to linux! Free the penguins! Colin Start Frescobaldi, then go to Edit then Preferences. Next, select Lilypond Preferences, and you will see an area to the right which lists he Lilypond binaries known to Frescobaldi. If your new home/tsang/bin/lilypond isn't listed, you can use the Add button and then you can also make 2.14 the default version for Frescobaldi. Finanlly, while you are in the Preferences area, make sure you check the box which says Automatically choose Lilypond version from document, which allows you to use any version which is known to Frescobaldi. Hope that helps! Colin Campbell Bug Squad -- A chief event of life is the day in which we have encountered a mind that startled us. -Ralph Waldo Emerson, writer and philosopher (1803-1882) -- A chief event of life is the day in which we have encountered a mind that startled us. -Ralph Waldo Emerson, writer and philosopher (1803-1882) ___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
Re: V2.14.0 - midi volume midi arpeggio
2011/6/9 MING TSANG tsan...@rogers.com:
QUESTIONS:
2. I produce a midi output for each voice + piano. I want to produce the
voice sound track is louder than the piano. I use the following
\include articulate.ly
and
\new voice {
\set Staff.midiMinimumVolume = #0.2
\set Staff.midiMaximumVolume = #0.6
}
but I cannot produce the effect I want. How can I resolved this?
I suppose lack of dynamic sign at the beginning of the music may be
the cause of the problem. See
http://lilypond.org/doc/v2.14/Documentation/notation/controlling-midi-dynamics
: midiMinimumVolume and midiMaximumVolume properties have an effect
only on dynamic marks, so a dynamic mark must be placed at the
beginning of the score if you want them to work properly.
In other words,
\version 2.14.0
\include articulate.ly
\score {
\new Voice {
c \mf d e f
}
\new Voice {
\set Staff.midiMinimumVolume = #0.2
\set Staff.midiMaximumVolume = #0.5
c''\mf c'' c'' c''
}
\midi {}
}
works for me (i.e. the high c's are quieter than low melody).
HTH,
Janek
PS there is a bit different wording in Notation Reference than what i
wrote. Maybe it should be changed to simpler english?
___
lilypond-user mailing list
lilypond-user@gnu.org
https://lists.gnu.org/mailman/listinfo/lilypond-user
Re: V2.14.0 - midi volume midi arpeggio
Colin : Thank you very much. Now I have two icon for frescobaldi - one for each version (2.12.3 2.14.0). Federico; David; janek; Helge : Thank you all for helping / (showing pointers to) me on frescobaldi/lilypond setup/install the past few days. It is fruitful and I am very much appreciated. I am very new to linux world. Date: Fri, 10 Jun 2011 18:36:50 -0600 From: Colin Campbell c...@shaw.ca To: lilypond-user@gnu.org Subject: Re: V2.14.0 - midi volume midi arpeggio Message-ID: 4df2b8a2.9070...@shaw.ca Content-Type: text/plain; charset=iso-8859-1; Format=flowed On 11-06-10 03:23 PM, MING TSANG wrote: After several attempt, I successfully install lilypond v2.14.0_1 in /home/tsang/bin/lilypond (v2.14.0_1) lilypond v2.12.3 was still in /bin/lilypond Now I have two version in ubuntu. Right now frescobaldi is using the /bin/lilypond (version 2.12.3) Question: How can I configure frescobaldi to execute /home/tsang/bin/lilypond (2.14.0)? On frescobaldi configure, I edit the path to point to /home/tsang/bin/, but when click on lilypond button on frescobaldi, it execute lilypond 2.12.3. Here is the echo $PATH entry: tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ echo $PATH /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games Start Frescobaldi, then go to Edit then Preferences. Next, select Lilypond Preferences, and you will see an area to the right which lists he Lilypond binaries known to Frescobaldi. If your new home/tsang/bin/lilypond isn't listed, you can use the Add button and then you can also make 2.14 the default version for Frescobaldi. Finanlly, while you are in the Preferences area, make sure you check the box which says Automatically choose Lilypond version from document, which allows you to use any version which is known to Frescobaldi. Hope that helps! Colin Campbell Bug Squad -- A chief event of life is the day in which we have encountered a mind that startled us. -Ralph Waldo Emerson, writer and philosopher (1803-1882)___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
Re: V2.14.0 - midi volume midi arpeggio
On 11-06-11 05:39 AM, MING TSANG wrote: Colin : Thank you very much. Now I have two icon for frescobaldi - one for each version (2.12.3 2.14.0). Federico; David; janek; Helge : Thank you all for helping / (showing pointers to) me on frescobaldi/lilypond setup/install the past few days. It is fruitful and I am very much appreciated. I am very new to linux world. ** Actually, Ming, you only need one icon for Frescobaldi. As I mentioned, Frescobaldi lets you add several versions of Lilypond in the Preferences area, and set only one of them as default. The extra check box allows you to create scores in, for example 2.12.3, and Frescobaldi will see the \version 2.12.3 and use that version of Lilypond, if you have it installed. You can also have 2.14 installed and listed in Frescobaldi, and again, Frescobaldi will use whichever Lilypond matches the \version in your score. Welcome to linux! Free the penguins! Colin Start Frescobaldi, then go to Edit then Preferences. Next, select Lilypond Preferences, and you will see an area to the right which lists he Lilypond binaries known to Frescobaldi. If your new home/tsang/bin/lilypond isn't listed, you can use the Add button and then you can also make 2.14 the default version for Frescobaldi. Finanlly, while you are in the Preferences area, make sure you check the box which says Automatically choose Lilypond version from document, which allows you to use any version which is known to Frescobaldi. Hope that helps! Colin Campbell Bug Squad -- A chief event of life is the day in which we have encountered a mind that startled us. -Ralph Waldo Emerson, writer and philosopher (1803-1882) -- A chief event of life is the day in which we have encountered a mind that startled us. -Ralph Waldo Emerson, writer and philosopher (1803-1882) ___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
Re: V2.14.0 - midi volume midi arpeggio
Il giorno gio, 09/06/2011 alle 19.04 -0700, MING TSANG ha scritto: Thank you for your reply. I follow your suggestion steps, I got the following error. I am new to linux world (approx. one month). I have a hard time copying out terminal message. sh: can't open lilypond-2.14.0-1.linux-x86.sh It means that you are running the command in the wrong directory. Where have you saved the .sh file? Some useful unix commands: pwd (tells you the current working directory) ls (show the files of the current directory) If you install the package 'locate', you'll be able to know where is the file: locate lilypond-2.14.0-1.linux-x86.sh I use to install/update lilypond with these commands: cd /tmp # files in /tmp will be automatically deleted when I shut down the computer wget http://.. # copy and paste the link of the file uninstall-lilypond # uninstall previous version sh lilypond-VERSION.OS.sh I install it as normal user, so in my home directory. Another thing you should know about using the terminal is the TAB key, which autocompletes the names of files and directories. In order to copy and paste in the terminal you can use the mouse or Ctrl + Shift + Key (C, V, Z). Good luck! Federico ___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
Re: V2.14.0 - midi volume midi arpeggio
2011/6/10 MING TSANG tsan...@rogers.com: Thank you for your reply. I follow your suggestion steps, I got the following error. I am new to linux world (approx. one month). I have a hard time copying out terminal message. sh: can't open lilypond-2.14.0-1.linux-x86.sh there is one thing that should be checked: which file from http://lilypond.org/unix.html have you downloaded? I assumed that you downloaded the one at the top, named lilypond-2.14.0-1.linux-x86.sh, but of course if you downloaded another one, you have to modify your command accordingly (it should read sh INSTALLER-FILENAME) HTH, Janek ___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
Re: V2.14.0 - midi volume midi arpeggio
On 10. juni 2011 04:04, MING TSANG wrote: Thank you for your reply. I follow your suggestion steps, I got the following error. I am new to linux world (approx. one month). I have a hard time copying out terminal message. That should be easy - if you write your email message on the same machine: 1. Start writing the mail message where you want to show us the error. 2. Mark the error text using the mouse. a. Put mouse cursor over the beginning of the text b. Hold down button one c. Drag along the text, you should see it getting selected d. release the mouse button Now, the message is highlighted 3. Put the mouse cursor over the email message, and press the third mouse button. This causes the highlighted error text to be copied into the email message. If your mouse doesn't have a third button, press the other two simultaneously instead. This is how you copy just about any text from one app to another in linux. The method is different from windows, but much quicker. If you're writing your mail on another machine, paste the error messages into a file instead. Then transfer the file to where you write your mail. sh: can't open lilypond-2.14.0-1.linux-x86.sh Try the ls command. Is the file lilypond-2.14.0-1.linux-x86.sh there? Maybe you mis-spelled it? If the file isn't there, use the cd command to move to the correct directory first. Then use ls to check. Web browsers tend to put files in a directory named Downloads. If the file is there, avoid mis-spelling by using tab completion. Type something like: sh lilypond-2.14 then press the TAB key. Linux should now fill out the rest of the filename so you don't have to. This saves time and avoids tyiping errors. It works provided that there is only one file where the name starts with lilypond-2.14 arpeggio chord midi sound was not produced on 2.12.3 either. I don't think lilypond's midi output is capable of making arpeggio sound yet. So you can print scores with arpeggio symbols, but the midi won't do that. To get arpeggio in midi, write the arpeggio out using ties. Example: http://lilypond.org/doc/v2.12/Documentation/user/lilypond/Writing-rhythms#Ties Scroll down to Using ties with arpeggios Something similiar can be done do get realistic guitar sound. A guitarist doesn't normally hit all the strings at the same time, but the lilypond midi guitar do... Helge Hafting ___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
Re: V2.14.0 - midi volume midi arpeggio
Thank you Helge Hafting, Janek Warchol, Federico Bruni for helping me to use terminal commands in ubuntu. I downloaded the right file - dir shows it. Now I copied the error - see below: tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ dir acl DownloadsPublicTest.pdf yming.xhb~ BOOKS DropboxrosegardenTest.ps your-love.ly Calibre\ Library examples.desktop Templatesuntitled.xhb Desktop MusicTest.lyVideos Documents PicturesTest.ly~yming.xhb tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ cd Downloads tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/Downloads$ dir 2011_summer_camp_headcount_May24.xlsx libflashplayer.so gsview-4.9 lilypond-2.13.61-1.linux-x86.sh gsview-4.9.tar.gz lilypond-2.14.0-1.linux-x86.sh install_flash_player_10_linux.tar.gz usr tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/Downloads$ sh lilypond-2.14.0-linux-x86.sh sh: Can't open lilypond-2.14.0-linux-x86.sh tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/Downloads$ end of message QUESTION: Do I need to uninstall v2.12.3 lilypond? How can I do it? Janek: arpeggio midi sound is not produced on v2.12.3 either. From: Helge Hafting helge.haft...@hist.no To: lilypond-user@gnu.org; tsan...@rogers.com Sent: Fri, June 10, 2011 6:01:52 AM Subject: Re: V2.14.0 - midi volume midi arpeggio On 10. juni 2011 04:04, MING TSANG wrote: Thank you for your reply. I follow your suggestion steps, I got the following error. I am new to linux world (approx. one month). I have a hard time copying out terminal message. That should be easy - if you write your email message on the same machine: 1. Start writing the mail message where you want to show us the error. 2. Mark the error text using the mouse. a. Put mouse cursor over the beginning of the text b. Hold down button one c. Drag along the text, you should see it getting selected d. release the mouse button Now, the message is highlighted 3. Put the mouse cursor over the email message, and press the third mouse button. This causes the highlighted error text to be copied into the email message. If your mouse doesn't have a third button, press the other two simultaneously instead. This is how you copy just about any text from one app to another in linux. The method is different from windows, but much quicker. If you're writing your mail on another machine, paste the error messages into a file instead. Then transfer the file to where you write your mail. sh: can't open lilypond-2.14.0-1.linux-x86.sh Try the ls command. Is the file lilypond-2.14.0-1.linux-x86.sh there? Maybe you mis-spelled it? If the file isn't there, use the cd command to move to the correct directory first. Then use ls to check. Web browsers tend to put files in a directory named Downloads. If the file is there, avoid mis-spelling by using tab completion. Type something like: sh lilypond-2.14 then press the TAB key. Linux should now fill out the rest of the filename so you don't have to. This saves time and avoids tyiping errors. It works provided that there is only one file where the name starts with lilypond-2.14 arpeggio chord midi sound was not produced on 2.12.3 either. I don't think lilypond's midi output is capable of making arpeggio sound yet. So you can print scores with arpeggio symbols, but the midi won't do that. To get arpeggio in midi, write the arpeggio out using ties. Example: http://lilypond.org/doc/v2.12/Documentation/user/lilypond/Writing-rhythms#Ties Scroll down to Using ties with arpeggios Something similiar can be done do get realistic guitar sound. A guitarist doesn't normally hit all the strings at the same time, but the lilypond midi guitar do... Helge Hafting ___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
Re: V2.14.0 - midi volume midi arpeggio
I think that v2.12.3 is the package in the ubuntu repository. If so, you don't need to uninstall it, because it's installed in /usr/bin, while the packages provided by lilypond.org are installed either in your home or in /usr/local (if you install it as root). There will be no conflict. However, if you want to uninstall v2.12.3 you can use Synaptic or type in a terminal: sudo apt-get remove lilypond The error belows is weird. Enter in Downloads and type: ls -l You can try also the graphical way. Use the file manager to reach the directory, right click on the .sh file and choose properties. In the Permissions tab (or something like that) you must check Execution. Close and clic normally on the file. You'll see a window asking if you want to see the file or run it. Tell him to run as a program and everything should work. Unless the downloaded file is corrupted. Post the ls -l command 2011/6/10 MING TSANG tsan...@rogers.com Thank you Helge Hafting, Janek Warchol, Federico Bruni for helping me to use terminal commands in ubuntu. I downloaded the right file - dir shows it. Now I copied the error - see below: tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ dir acl DownloadsPublicTest.pdf yming.xhb~ BOOKS DropboxrosegardenTest.ps your-love.ly Calibre\ Library examples.desktop Templatesuntitled.xhb Desktop MusicTest.lyVideos Documents PicturesTest.ly~yming.xhb tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ cd Downloads tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/Downloads$ dir 2011_summer_camp_headcount_May24.xlsx libflashplayer.so gsview-4.9 lilypond-2.13.61-1.linux-x86.sh gsview-4.9.tar.gz lilypond-2.14.0-1.linux-x86.sh install_flash_player_10_linux.tar.gz usr tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/Downloads$ sh lilypond-2.14.0-linux-x86.sh sh: Can't open lilypond-2.14.0-linux-x86.sh tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/Downloads$ end of message QUESTION: Do I need to uninstall v2.12.3 lilypond? How can I do it? Janek: arpeggio midi sound is not produced on v2.12.3 either. -- ___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
Re: V2.14.0 - midi volume midi arpeggio
I post a ls realizing missing -1. in the file name. I try whold things again and here is the message. Should I download the file and try again? message begins tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ dir acl DocumentsMusicTest.ly Videos bin DownloadsPicturesTest.ly~ yming.xhb BOOKS DropboxPublicTest.pdf yming.xhb~ Calibre\ Library examples.desktop rosegardenTest.ps your-love.ly Desktop lilypondTemplatesuntitled.xhb tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ cd Downloads tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/Downloads$ dir 2011_summer_camp_headcount_May24.xlsx libflashplayer.so gsview-4.9 lilypond-2.13.61-1.linux-x86.sh gsview-4.9.tar.gz lilypond-2.14.0-1.linux-x86.sh install_flash_player_10_linux.tar.gz usr tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/Downloads$ ls -1 lilypond-2.14.0-linux-x86.sh ls: cannot access lilypond-2.14.0-linux-x86.sh: No such file or directory tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/Downloads$ ls lilypond-2.14.0-1.linux-x86.sh lilypond-2.14.0-1.linux-x86.sh tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/Downloads$ sh lilypond-2.14.0-1.linux.x86.sh sh: Can't open lilypond-2.14.0-1.linux.x86.sh tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/Downloads$ From: Federico Bruni fedel...@gmail.com To: MING TSANG tsan...@rogers.com Cc: Helge Hafting helge.haft...@hist.no; Janek Warchoł lemniskata.bernoull...@gmail.com; lilypond-user@gnu.org; lilypond-user-requ...@gnu.org Sent: Fri, June 10, 2011 8:12:44 AM Subject: Re: V2.14.0 - midi volume midi arpeggio I think that v2.12.3 is the package in the ubuntu repository. If so, you don't need to uninstall it, because it's installed in /usr/bin, while the packages provided by lilypond.org are installed either in your home or in /usr/local (if you install it as root). There will be no conflict. However, if you want to uninstall v2.12.3 you can use Synaptic or type in a terminal: sudo apt-get remove lilypond The error belows is weird. Enter in Downloads and type: ls -l You can try also the graphical way. Use the file manager to reach the directory, right click on the .sh file and choose properties. In the Permissions tab (or something like that) you must check Execution. Close and clic normally on the file. You'll see a window asking if you want to see the file or run it. Tell him to run as a program and everything should work. Unless the downloaded file is corrupted. Post the ls -l command 2011/6/10 MING TSANG tsan...@rogers.com Thank you Helge Hafting, Janek Warchol, Federico Bruni for helping me to use terminal commands in ubuntu. I downloaded the right file - dir shows it. Now I copied the error - see below: tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ dir acl DownloadsPublicTest.pdf yming.xhb~ BOOKS DropboxrosegardenTest.ps your-love.ly Calibre\ Library examples.desktop Templatesuntitled.xhb Desktop MusicTest.lyVideos Documents PicturesTest.ly~yming.xhb tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ cd Downloads tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/Downloads$ dir 2011_summer_camp_headcount_May24.xlsx libflashplayer.so gsview-4.9 lilypond-2.13.61-1.linux-x86.sh gsview-4.9.tar.gz lilypond-2.14.0-1.linux-x86.sh install_flash_player_10_linux.tar.gz usr tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/Downloads$ sh lilypond-2.14.0-linux-x86.sh sh: Can't open lilypond-2.14.0-linux-x86.sh tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/Downloads$ end of message QUESTION: Do I need to uninstall v2.12.3 lilypond? How can I do it? Janek: arpeggio midi sound is not produced on v2.12.3 either. ___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
Re: V2.14.0 - midi volume midi arpeggio
Hi, On Fri, 10 Jun 2011 14:12:44 +0200 Federico Bruni fedel...@gmail.com wrote: In the Permissions tab (or something like that) you must check Execution. Close and clic normally on the file. He is using sh file so even if it weren't executable, sh would execute it. tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/Downloads$ sh lilypond-2.14.0-linux-x86.sh sh: Can't open lilypond-2.14.0-linux-x86.sh Simply try, sh ./lilypond-2.14.0-linux-x86.sh ... with the './'. I think the problem is that '.' (the current working directory) is not in PATH -- my guess HTH David ___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
Re: V2.14.0 - midi volume midi arpeggio
the option -l is a letter, not number 1 post the output of the command below: tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/Downloads$ ls -l 2011/6/10 MING TSANG tsan...@rogers.com I post a ls realizing missing -1. in the file name. I try whold things again and here is the message. Should I download the file and try again? message begins tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ dir acl DocumentsMusicTest.ly Videos bin DownloadsPicturesTest.ly~ yming.xhb BOOKS DropboxPublicTest.pdf yming.xhb~ Calibre\ Library examples.desktop rosegardenTest.ps your-love.ly Desktop lilypondTemplatesuntitled.xhb tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ cd Downloads tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/Downloads$ dir 2011_summer_camp_headcount_May24.xlsx libflashplayer.so gsview-4.9 lilypond-2.13.61-1.linux-x86.sh gsview-4.9.tar.gz lilypond-2.14.0-1.linux-x86.sh install_flash_player_10_linux.tar.gz usr tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/Downloads$ ls -1 lilypond-2.14.0-linux-x86.sh ls: cannot access lilypond-2.14.0-linux-x86.sh: No such file or directory tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/Downloads$ ls lilypond-2.14.0-1.linux-x86.sh lilypond-2.14.0-1.linux-x86.sh tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/Downloads$ sh lilypond-2.14.0-1.linux.x86.sh sh: Can't open lilypond-2.14.0-1.linux.x86.sh tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/Downloads$ -- *From:* Federico Bruni fedel...@gmail.com *To:* MING TSANG tsan...@rogers.com *Cc:* Helge Hafting helge.haft...@hist.no; Janek Warchoł lemniskata.bernoull...@gmail.com; lilypond-user@gnu.org; lilypond-user-requ...@gnu.org *Sent:* Fri, June 10, 2011 8:12:44 AM *Subject:* Re: V2.14.0 - midi volume midi arpeggio I think that v2.12.3 is the package in the ubuntu repository. If so, you don't need to uninstall it, because it's installed in /usr/bin, while the packages provided by lilypond.org are installed either in your home or in /usr/local (if you install it as root). There will be no conflict. However, if you want to uninstall v2.12.3 you can use Synaptic or type in a terminal: sudo apt-get remove lilypond The error belows is weird. Enter in Downloads and type: ls -l You can try also the graphical way. Use the file manager to reach the directory, right click on the .sh file and choose properties. In the Permissions tab (or something like that) you must check Execution. Close and clic normally on the file. You'll see a window asking if you want to see the file or run it. Tell him to run as a program and everything should work. Unless the downloaded file is corrupted. Post the ls -l command 2011/6/10 MING TSANG tsan...@rogers.com Thank you Helge Hafting, Janek Warchol, Federico Bruni for helping me to use terminal commands in ubuntu. I downloaded the right file - dir shows it. Now I copied the error - see below: tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ dir acl DownloadsPublicTest.pdf yming.xhb~ BOOKS DropboxrosegardenTest.ps your-love.ly Calibre\ Library examples.desktop Templatesuntitled.xhb Desktop MusicTest.lyVideos Documents PicturesTest.ly~yming.xhb tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ cd Downloads tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/Downloads$ dir 2011_summer_camp_headcount_May24.xlsx libflashplayer.so gsview-4.9 lilypond-2.13.61-1.linux-x86.sh gsview-4.9.tar.gz lilypond-2.14.0-1.linux-x86.sh install_flash_player_10_linux.tar.gz usr tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/Downloads$ sh lilypond-2.14.0-linux-x86.sh sh: Can't open lilypond-2.14.0-linux-x86.sh tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/Downloads$ end of message QUESTION: Do I need to uninstall v2.12.3 lilypond? How can I do it? Janek: arpeggio midi sound is not produced on v2.12.3 either. -- ___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
Re: V2.14.0 - midi volume midi arpeggio
On 06/10/2011 08:41 AM, MING TSANG wrote: I post a ls realizing missing -1. in the file name. I try whold things again and here is the message. Should I download the file and try again? message begins tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/Downloads$ ls lilypond-2.14.0-1.linux-x86.sh lilypond-2.14.0-1.linux-x86.sh tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/Downloads$ sh lilypond-2.14.0-1.linux.x86.sh sh: Can't open lilypond-2.14.0-1.linux.x86.sh tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/Downloads$ The filename is still wrong: ls: lilypond-2.14.0-1.linux-x86.sh sh: lilypond-2.14.0-1.linux.x86.sh Not the same! Tab completion is your friend. Since you said you are new to Linux: type “sh lilypond-” then hit tab. If there is a single file that matches, it will complete it for you. If not, hit tab again to see the list of possible matches, then type a little more until you have a unique match. ~Chris -- Chris Maden, text nerd URL: http://crism.maden.org/ “Before I built a wall I’d ask to know / What I was walling in or out, / And to whom I was like to give offence.” — RF, Mending Wall GnuPG Fingerprint: C6E4 E2A9 C9F8 71AC 9724 CAA3 19F8 6677 0077 C319 ___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
Re: V2.14.0 - midi volume midi arpeggio
After I use ./ on the file name It run successfully. I was asked uninstall-lilypond. So I did. Run install again with ./. This time the execution went OK. But when I do lilypond it says the lily pond is 2.12.3. tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ lilypond GNU LilyPond 2.12.3 Usage: lilypond [OPTION]... FILE... message begin: tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ dir acl DocumentsMusicTest.ly Videos bin DownloadsPicturesTest.ly~ yming.xhb BOOKS DropboxPublicTest.pdf yming.xhb~ Calibre\ Library examples.desktop rosegardenTest.ps your-love.ly Desktop lilypondTemplatesuntitled.xhb tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ cd Downloads tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/Downloads$ dir 2011_summer_camp_headcount_May24.xlsx libflashplayer.so gsview-4.9 lilypond-2.13.61-1.linux-x86.sh gsview-4.9.tar.gz lilypond-2.14.0-1.linux-x86.sh install_flash_player_10_linux.tar.gz usr tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/Downloads$ ls -l lilypond-2.14.0-1.linux-x86.sh -rwxr-xr-x 1 tsang tsang 20626851 2011-06-06 11:37 lilypond-2.14.0-1.linux-x86.sh tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/Downloads$ sh ./lilypond-2.14.0-1.linux-x86.sh lilypond installer for version 2.14.0 release 1, i686 build. For a list of options, abort (^C) then do: sh ./lilypond-2.14.0-1.linux-x86.sh --help You are about to install LilyPond in /home/tsang/lilypond A script in /home/tsang/bin will be created as a shortcut. Press ^C to abort, or Enter to proceed. Directory /home/tsang/lilypond already exists. Remove old lilypond installations before installing this one. Run /home/tsang/bin/uninstall-lilypond to uninstall previous version. tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/Downloads$ uninstall-lilypond uninstall-lilypond: command not found tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/Downloads$ cd /home/tsang/bin tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/bin$ uninstall-lilypond uninstall-lilypond: command not found tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/bin$ dir abc2lylilypondlilypond-wrapper.guile mup2ly convert-ly lilypond-booklilypond-wrapper.python musicxml2ly etf2lylilypond-invoke-editor midi2ly uninstall-lilypond tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/bin$ run install-lilypond No command 'run' found, did you mean: Command 'crun' from package 'ceph' (universe) Command 'zrun' from package 'moreutils' (universe) Command 'runq' from package 'exim4-daemon-heavy' (main) Command 'runq' from package 'sendmail-bin' (universe) Command 'runq' from package 'exim4-daemon-light' (main) Command 'grun' from package 'grun' (universe) Command 'qrun' from package 'torque-client' (multiverse) Command 'qrun' from package 'torque-client-x11' (universe) Command 'lrun' from package 'lustre-utils' (universe) Command 'rn' from package 'trn' (multiverse) Command 'rn' from package 'trn4' (multiverse) Command 'rup' from package 'rstat-client' (universe) Command 'srun' from package 'slurm-llnl' (universe) run: command not found tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/bin$ uninstall-lilypond uninstall-lilypond: command not found end of message From: David Santamauro david.santama...@gmail.com To: Federico Bruni fedel...@gmail.com Cc: MING TSANG tsan...@rogers.com; lilypond-user@gnu.org Sent: Fri, June 10, 2011 8:43:45 AM Subject: Re: V2.14.0 - midi volume midi arpeggio Hi, On Fri, 10 Jun 2011 14:12:44 +0200 Federico Bruni fedel...@gmail.com wrote: In the Permissions tab (or something like that) you must check Execution. Close and clic normally on the file. He is using sh file so even if it weren't executable, sh would execute it. tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/Downloads$ sh lilypond-2.14.0-linux-x86.sh sh: Can't open lilypond-2.14.0-linux-x86.sh Simply try, sh ./lilypond-2.14.0-linux-x86.sh ... with the './'. I think the problem is that '.' (the current working directory) is not in PATH -- my guess HTH David ___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
Re: V2.14.0 - midi volume midi arpeggio
On 10 June 2011 16:16, Christopher R. Maden cr...@maden.org wrote: The filename is still wrong: ls: lilypond-2.14.0-1.linux-x86.sh sh: lilypond-2.14.0-1.linux.x86.sh Not the same! Tab completion is your friend. Since you said you are new to Linux: type “sh lilypond-” then hit tab. If there is a single file that matches, it will complete it for you. If not, hit tab again to see the list of possible matches, then type a little more until you have a unique match. I have always used sudo in order to install with the LilyPond script (on Ubuntu). sudo sh lilypond-2.14.0-1.linux.x86.sh and it installs lilypond in /usr/local/lilypond The bin PATH is /usr/local/bin/lilypond Cheers, Xavier -- Xavier Scheuer x.sche...@gmail.com ___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
Re: V2.14.0 - midi volume midi arpeggio
~/bin is not in your path, that's why uninstall-lilypond returns 'command not found'. (~ stands for user's home) The absolute path should work: /home/tsang/bin/uninstall-lilypond You can understand what's going on using these two commands: which lilypond which -a lilypond echo $PATH But first have a look at this page (Ubuntu is based on Debian): http://wiki.debian.org/EnvironmentVariables 2011/6/10 MING TSANG tsan...@rogers.com After I use ./ on the file name It run successfully. I was asked uninstall-lilypond. So I did. Run install again with ./. This time the execution went OK. But when I do lilypond it says the lily pond is 2.12.3. tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ lilypond GNU LilyPond 2.12.3 Usage: lilypond [OPTION]... FILE... message begin: tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ dir acl DocumentsMusicTest.ly Videos bin DownloadsPicturesTest.ly~ yming.xhb BOOKS DropboxPublicTest.pdf yming.xhb~ Calibre\ Library examples.desktop rosegardenTest.ps your-love.ly Desktop lilypondTemplatesuntitled.xhb tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ cd Downloads tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/Downloads$ dir 2011_summer_camp_headcount_May24.xlsx libflashplayer.so gsview-4.9 lilypond-2.13.61-1.linux-x86.sh gsview-4.9.tar.gz lilypond-2.14.0-1.linux-x86.sh install_flash_player_10_linux.tar.gz usr tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/Downloads$ ls -l lilypond-2.14.0-1.linux-x86.sh -rwxr-xr-x 1 tsang tsang 20626851 2011-06-06 11:37 lilypond-2.14.0-1.linux-x86.sh tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/Downloads$ sh ./ lilypond-2.14.0-1.linux-x86.sh lilypond installer for version 2.14.0 release 1, i686 build. For a list of options, abort (^C) then do: sh ./lilypond-2.14.0-1.linux-x86.sh --help You are about to install LilyPond in /home/tsang/lilypond A script in /home/tsang/bin will be created as a shortcut. Press ^C to abort, or Enter to proceed. Directory /home/tsang/lilypond already exists. Remove old lilypond installations before installing this one. Run /home/tsang/bin/uninstall-lilypond to uninstall previous version. tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/Downloads$ uninstall-lilypond uninstall-lilypond: command not found tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/Downloads$ cd /home/tsang/bin tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/bin$ uninstall-lilypond uninstall-lilypond: command not found tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/bin$ dir abc2lylilypondlilypond-wrapper.guile mup2ly convert-ly lilypond-booklilypond-wrapper.python musicxml2ly etf2lylilypond-invoke-editor midi2ly uninstall-lilypond tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/bin$ run install-lilypond No command 'run' found, did you mean: Command 'crun' from package 'ceph' (universe) Command 'zrun' from package 'moreutils' (universe) Command 'runq' from package 'exim4-daemon-heavy' (main) Command 'runq' from package 'sendmail-bin' (universe) Command 'runq' from package 'exim4-daemon-light' (main) Command 'grun' from package 'grun' (universe) Command 'qrun' from package 'torque-client' (multiverse) Command 'qrun' from package 'torque-client-x11' (universe) Command 'lrun' from package 'lustre-utils' (universe) Command 'rn' from package 'trn' (multiverse) Command 'rn' from package 'trn4' (multiverse) Command 'rup' from package 'rstat-client' (universe) Command 'srun' from package 'slurm-llnl' (universe) run: command not found tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/bin$ uninstall-lilypond uninstall-lilypond: command not found end of message -- *From:* David Santamauro david.santama...@gmail.com *To:* Federico Bruni fedel...@gmail.com *Cc:* MING TSANG tsan...@rogers.com; lilypond-user@gnu.org *Sent:* Fri, June 10, 2011 8:43:45 AM *Subject:* Re: V2.14.0 - midi volume midi arpeggio Hi, On Fri, 10 Jun 2011 14:12:44 +0200 Federico Bruni fedel...@gmail.com wrote: In the Permissions tab (or something like that) you must check Execution. Close and clic normally on the file. He is using sh file so even if it weren't executable, sh would execute it. tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/Downloads$ sh lilypond-2.14.0-linux-x86.sh sh: Can't open lilypond-2.14.0-linux-x86.sh Simply try, sh ./lilypond-2.14.0-linux-x86.sh ... with the './'. I think the problem is that '.' (the current working directory) is not in PATH -- my guess HTH David ___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
Re: V2.14.0 - midi volume midi arpeggio
After several attempt, I successfully install lilypond v2.14.0_1 in /home/tsang/bin/lilypond (v2.14.0_1) lilypond v2.12.3 was still in /bin/lilypond Now I have two version in ubuntu. Right now frescobaldi is using the /bin/lilypond (version 2.12.3) Question: How can I configure frescobaldi to execute /home/tsang/bin/lilypond (2.14.0)? On frescobaldi configure, I edit the path to point to /home/tsang/bin/, but when click on lilypond button on frescobaldi, it execute lilypond 2.12.3. Here is the echo $PATH entry: tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ echo $PATH /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games From: Federico Bruni fedel...@gmail.com To: MING TSANG tsan...@rogers.com Cc: David Santamauro david.santama...@gmail.com; lilypond-user@gnu.org Sent: Fri, June 10, 2011 11:09:51 AM Subject: Re: V2.14.0 - midi volume midi arpeggio ~/bin is not in your path, that's why uninstall-lilypond returns 'command not found'. (~ stands for user's home) The absolute path should work: /home/tsang/bin/uninstall-lilypond You can understand what's going on using these two commands: which lilypond which -a lilypond echo $PATH But first have a look at this page (Ubuntu is based on Debian): http://wiki.debian.org/EnvironmentVariables 2011/6/10 MING TSANG tsan...@rogers.com After I use ./ on the file name It run successfully. I was asked uninstall-lilypond. So I did. Run install again with ./. This time the execution went OK. But when I do lilypond it says the lily pond is 2.12.3. tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ lilypond GNU LilyPond 2.12.3 Usage: lilypond [OPTION]... FILE... message begin: tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ dir acl DocumentsMusicTest.ly Videos bin DownloadsPictures Test.ly~ yming.xhb BOOKS DropboxPublicTest.pdf yming.xhb~ Calibre\ Library examples.desktop rosegardenTest.ps your-love.ly Desktop lilypondTemplatesuntitled.xhb tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ cd Downloads tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/Downloads$ dir 2011_summer_camp_headcount_May24.xlsx libflashplayer.so gsview-4.9 lilypond-2.13.61-1.linux-x86.sh gsview-4.9.tar.gz lilypond-2.14.0-1.linux-x86.sh install_flash_player_10_linux.tar.gz usr tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/Downloads$ ls -l lilypond-2.14.0-1.linux-x86.sh -rwxr-xr-x 1 tsang tsang 20626851 2011-06-06 11:37 lilypond-2.14.0-1.linux-x86.sh tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/Downloads$ sh ./lilypond-2.14.0-1.linux-x86.sh lilypond installer for version 2.14.0 release 1, i686 build. For a list of options, abort (^C) then do: sh ./lilypond-2.14.0-1.linux-x86.sh --help You are about to install LilyPond in /home/tsang/lilypond A script in /home/tsang/bin will be created as a shortcut. Press ^C to abort, or Enter to proceed. Directory /home/tsang/lilypond already exists. Remove old lilypond installations before installing this one. Run /home/tsang/bin/uninstall-lilypond to uninstall previous version. tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/Downloads$ uninstall-lilypond uninstall-lilypond: command not found tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/Downloads$ cd /home/tsang/bin tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/bin$ uninstall-lilypond uninstall-lilypond: command not found tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/bin$ dir abc2lylilypondlilypond-wrapper.guile mup2ly convert-ly lilypond-booklilypond-wrapper.python musicxml2ly etf2lylilypond-invoke-editor midi2ly uninstall-lilypond tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/bin$ run install-lilypond No command 'run' found, did you mean: Command 'crun' from package 'ceph' (universe) Command 'zrun' from package 'moreutils' (universe) Command 'runq' from package 'exim4-daemon-heavy' (main) Command 'runq' from package 'sendmail-bin' (universe) Command 'runq' from package 'exim4-daemon-light' (main) Command 'grun' from package 'grun' (universe) Command 'qrun' from package 'torque-client' (multiverse) Command 'qrun' from package 'torque-client-x11' (universe) Command 'lrun' from package 'lustre-utils' (universe) Command 'rn' from package 'trn' (multiverse) Command 'rn' from package 'trn4' (multiverse) Command 'rup' from package 'rstat-client' (universe) Command 'srun' from package 'slurm-llnl' (universe) run: command not found tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~/bin$ uninstall-lilypond uninstall-lilypond: command not found end of message From: David Santamauro david.santama...@gmail.com To: Federico Bruni fedel...@gmail.com Cc: MING TSANG tsan...@rogers.com; lilypond-user@gnu.org Sent: Fri, June 10, 2011 8:43:45 AM Subject: Re: V2.14.0 - midi volume midi arpeggio Hi, On Fri, 10
Re: V2.14.0 - midi volume midi arpeggio
On 11-06-10 03:23 PM, MING TSANG wrote: After several attempt, I successfully install lilypond v2.14.0_1 in /home/tsang/bin/lilypond (v2.14.0_1) lilypond v2.12.3 was still in /bin/lilypond Now I have two version in ubuntu. Right now frescobaldi is using the /bin/lilypond (version 2.12.3) Question: How can I configure frescobaldi to execute /home/tsang/bin/lilypond (2.14.0)? On frescobaldi configure, I edit the path to point to /home/tsang/bin/, but when click on lilypond button on frescobaldi, it execute lilypond 2.12.3. Here is the echo $PATH entry: tsang@tsang-HP-Pavilion-dv2000-EZ723UA-ABL:~$ echo $PATH /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games Start Frescobaldi, then go to Edit then Preferences. Next, select Lilypond Preferences, and you will see an area to the right which lists the Lilypond binaries known to Frescobaldi. If your new /home/tsang/bin/lilypond isn't listed, you can use the Add button and then you can also make 2.14 the default version for Frescobaldi. Finanlly, while you are in the Preferences area, make sure you check the box which says Automatically choose Lilypond version from document, which allows you to use any version which is known to Frescobaldi. Hope that helps! Colin Campbell Bug Squad -- A chief event of life is the day in which we have encountered a mind that startled us. -Ralph Waldo Emerson, writer and philosopher (1803-1882) ___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
V2.14.0 - midi volume midi arpeggio
Thank you for the release of 2.14.0. I install this version on to my window 7
pc and I am running jedit with lilypondtool.
I coded a song with S A T B (seperately) with piano (right + left hands).The
songs has 96 bars (measures). At bar 96 (last cord is an cross staff arpeggio.
QUESTIONS:
1. the midi output does not produce arpeggio sound. How can I fixed it.
2. I produce a midi output for each voice + piano. I want to produce the
voice
sound track is louder than the piano. I use the following
\include articulate.ly
and
\new voice {
\set Staff.midiMinimumVolume = #0.2
\set Staff.midiMaximumVolume = #0.6
}
but I cannot produce the effect I want. How can I resolved this?
3. How can I install lilypond 2.14.0 for Ubuntu 10.10 so that frescobaldi will
use 2.14.0 instead of now using 2.12.3? I download v2.14.0 for linux and it is
a
.sh file. How can I use it for install?
Thank you for the help.
___
lilypond-user mailing list
lilypond-user@gnu.org
https://lists.gnu.org/mailman/listinfo/lilypond-user
Re: V2.14.0 - midi volume midi arpeggio
Hi Ming,
2011/6/9 MING TSANG tsan...@rogers.com:
Thank you for the release of 2.14.0. I install this version on to my window
7 pc and I am running jedit with lilypondtool.
I coded a song with S A T B (seperately) with piano (right + left hands).The
songs has 96 bars (measures). At bar 96 (last cord is an cross staff
arpeggio.
QUESTIONS:
1. the midi output does not produce arpeggio sound. How can I fixed it.
2. I produce a midi output for each voice + piano. I want to produce the
voice sound track is louder than the piano. I use the following
\include articulate.ly
and
\new voice {
\set Staff.midiMinimumVolume = #0.2
\set Staff.midiMaximumVolume = #0.6
}
but I cannot produce the effect I want. How can I resolved this?
Did these two work in 2.12.3?
3. How can I install lilypond 2.14.0 for Ubuntu 10.10 so that frescobaldi
will use 2.14.0 instead of now using 2.12.3? I download v2.14.0 for linux
and it is a .sh file. How can I use it for install?
Open Terminal (shell, command line - the black window in which you can
type commands) and type
cd WRITE-HERE-THE-PATH-TO-THE-DIRECTORY-WHERE-DOWNLOADED-FILE-IS
(press return key)
sh lilypond-2.14.0-OS-TYPE.sh
(press return key)
and LilyPond should be installed.
Hope this helps,
Janek
___
lilypond-user mailing list
lilypond-user@gnu.org
https://lists.gnu.org/mailman/listinfo/lilypond-user
Re: V2.14.0 - midi volume midi arpeggio
Il giorno gio, 09/06/2011 alle 11.40 -0700, MING TSANG ha scritto: 3. How can I install lilypond 2.14.0 for Ubuntu 10.10 so that frescobaldi will use 2.14.0 instead of now using 2.12.3? I download v2.14.0 for linux and it is a .sh file. How can I use it for install? In Frescobaldi clic on Setting Configure Frescobaldi, choose LilyPond preferences. You'll see the lilypond binaries recognized by Frescobaldi. I think that Frescobaldi sees automatically any lilypond binary which is in the $PATH. Otherwise you have to add it manually. If you install the .sh file, the binary will be in your $PATH for sure. You can choose the default binary to use. A pretty cool feature is the automatic selection of the right lilypond binary (installed on your system) based on the \version statement in the file. HTH, Federico ___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
Re: V2.14.0 - midi volume midi arpeggio
2011/6/9 Federico Bruni fedel...@gmail.com:
Il giorno gio, 09/06/2011 alle 11.40 -0700, MING TSANG ha scritto:
3. How can I install lilypond 2.14.0 for Ubuntu 10.10 so that
frescobaldi will use 2.14.0 instead of now using 2.12.3? I download
v2.14.0 for linux and it is a .sh file. How can I use it for install?
In Frescobaldi clic on Setting Configure Frescobaldi, choose LilyPond
preferences.
You'll see the lilypond binaries recognized by Frescobaldi.
I think that Frescobaldi sees automatically any lilypond binary which is
in the $PATH.
I think Ming's problem is about installing LilyPond on Ubuntu, not
connecting it with Frescobaldi.
Ming, open Terminal (shell, command line - the black window in which
you can type commands) and type
cd HERE-WRITE-THE-PATH-TO-THE-DIRECTORY-WHERE-DOWNLOADED-FILE-IS
(press return key)
sh lilypond-2.14.0-1.linux-x86.sh
(press return key)
and LilyPond should be installed. Then you can follow Frederico's advice.
2011/6/9 MING TSANG tsan...@rogers.com:
1. the midi output does not produce arpeggio sound. How can I fixed it.
2. I produce a midi output for each voice + piano. I want to produce the
voice sound track is louder than the piano. I use the following
\include articulate.ly
and
\new voice {
\set Staff.midiMinimumVolume = #0.2
\set Staff.midiMaximumVolume = #0.6
}
but I cannot produce the effect I want. How can I resolved this?
Did these two work in 2.12.3?
Hope that helps,
Janek
___
lilypond-user mailing list
lilypond-user@gnu.org
https://lists.gnu.org/mailman/listinfo/lilypond-user
Re: V2.14.0 - midi volume midi arpeggio
Thank you for your reply.
I follow your suggestion steps, I got the following error. I am new to linux
world (approx. one month). I have a hard time copying out terminal message.
sh: can't open lilypond-2.14.0-1.linux-x86.sh
arpeggio chord midi sound was not produced on 2.12.3 either.
From: Janek Warchoł lemniskata.bernoull...@gmail.com
To: Federico Bruni fedel...@gmail.com
Cc: MING TSANG tsan...@rogers.com; lilypond-user-requ...@gnu.org;
lilypond-user@gnu.org
Sent: Thu, June 9, 2011 4:03:30 PM
Subject: Re: V2.14.0 - midi volume midi arpeggio
2011/6/9 Federico Bruni fedel...@gmail.com:
Il giorno gio, 09/06/2011 alle 11.40 -0700, MING TSANG ha scritto:
3. How can I install lilypond 2.14.0 for Ubuntu 10.10 so that
frescobaldi will use 2.14.0 instead of now using 2.12.3? I download
v2.14.0 for linux and it is a .sh file. How can I use it for install?
In Frescobaldi clic on Setting Configure Frescobaldi, choose LilyPond
preferences.
You'll see the lilypond binaries recognized by Frescobaldi.
I think that Frescobaldi sees automatically any lilypond binary which is
in the $PATH.
I think Ming's problem is about installing LilyPond on Ubuntu, not
connecting it with Frescobaldi.
Ming, open Terminal (shell, command line - the black window in which
you can type commands) and type
cd HERE-WRITE-THE-PATH-TO-THE-DIRECTORY-WHERE-DOWNLOADED-FILE-IS
(press return key)
sh lilypond-2.14.0-1.linux-x86.sh
(press return key)
and LilyPond should be installed. Then you can follow Frederico's advice.
2011/6/9 MING TSANG tsan...@rogers.com:
1. the midi output does not produce arpeggio sound. How can I fixed it.
2. I produce a midi output for each voice + piano. I want to produce the
voice sound track is louder than the piano. I use the following
\include articulate.ly
and
\new voice {
\set Staff.midiMinimumVolume = #0.2
\set Staff.midiMaximumVolume = #0.6
}
but I cannot produce the effect I want. How can I resolved this?
Did these two work in 2.12.3?
Hope that helps,
Janek
___
lilypond-user mailing list
lilypond-user@gnu.org
https://lists.gnu.org/mailman/listinfo/lilypond-user
