Re: [MBZ] OT - WiFi
Possible, if you have not set up any security. The wireless router may be keeping a log of who has been logging in. Max -- Sent from my Android phone with K-9 Mail. Please excuse my brevity. Hendrik Fay heni...@ozemail.com.au wrote: I was going to ask if someone might be patching into the wifi? Hendrik who has wifi and likes it Tim C wrote: On Sep 2, 2011, at 6:48 AM, Hans Neureiter diese...@gmail.com wrote: Lately my wireless connetion goes erradically from very good to very low and back. Nothing changed in my house, though. If you are having a software reset in the access point it can flap the driver fast enough for you not to lose association. In other words, don't discount the router and/or its power supply. For a quick test, open a command prompt and issue: ping -t google.com and leave it running for a while (a few minutes at least). If it is the AP resetting internally it will likely be dropping pings in an obvious pattern. If not, you can run around the house and see if the ping times get worse as you get closer to something. I am assuming you only have one AP, and there are no neighbors who have the same AP name (SSID). Best, -Tim also curious what kind of access point/router it is _ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] SECOND TRY: Kaleb, How much for a W124 Lug Wrench?
I find that when I torque to factory specification, 110nm I believe, the lug wrench is quite sufficient when it comes time to remove a wheel. Max -- Sent from my Android phone with K-9 Mail. Please excuse my brevity. Fmiser fmi...@gmail.com wrote: Dieselhead wrote: I keep a 18 braeker bar, 12 (1/2) extension with a 17MM socket on it all the time in the top of my tool box. I almost never need the factory lug wrench. If you have a tire shop put wheels on your car, you WILL need a cheater on the factory lug wrench, or my breaker bar setup. I just start with the tool that generally needs no strain. I keep wrench sets in my vehicles, so I usually don't care if I have a factory lug wrench. Marshal advocated using the factory wrench and a rubber mallet. I have been doing that for more than a decade. It works quite well. -- Philip _ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Yo Kleb -- how much for a bundt?
Rich, sorry to hear you won't be there, should be no problem bringing a wheel back as long as Kaleb cleans it up properly. We'll be in the sedan, it probably will ride in the trunk with the luggage. Max -- Sent from my Android phone with K-9 Mail. Please excuse my brevity. Rich Thomas richthomas79td...@constructivity.net wrote: For a 126 -- Shipped to SC? (or brought to the RustyQ then Max can bring it to me) The local knacker thinks they are made of aluminum, or gold, or something... --R _ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Cruising the hood in Londonstan
Hendrik Fay wrote: Any of you thinking of going to ole blighty for a spot of tea, better pack some heat!! Funny think is, in England putting a moderator on the end of your barrel is considered the polite thing to do, so you can shoot without disturbing your neighbors' peace and quiet. In the USA, moderators (called silencers here) are EVIL things, strictly controlled since 1934, shortly after the morons in Hollywood started making gangster movies. Mitch. ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] HPs New CEO
Gerry Archer wrote: Does this tell anything about the future of HP? Gerry '83 300D '83 240D Hewlett Packard names former SAP boss Apotheker CEO Too bad David Packard died 15 years ago. Then the heirs started fighting over the best way to loot their own inheritance. It's sad really. Reminds me of what the Waltons did to Wal-Mart, a place I used to like to shop. Mitch. ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Cruising the hood in Londonstan
Mitch Haley wrote:! Funny think is, Think? That'll teach me to email at 7 in the morning. ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] OT: DCM speakers
Found a set of DCM Time Frame 1000s locally. Original owner, still has boxes, etc., like new condition. Asking $300. I will go look at them this weekend. Is the price in line? Dan Sent from my iPhone On Sep 1, 2011, at 7:07 AM, Mitch Haley m...@voyager.net wrote: Looky what I found, $500 cat scratching posts: http://search.ebay.com/190572137860 These were quite expensive in the mid-late 1990s: http://www.audio-ideas.com/reviews/dcm.html I think I'd rather have four regular Time Windows. I did see a Surroundscape center channel recently, those seem to go for $50 or so, just like the CX Center and KX Center. ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] OT - WiFi
The network is secure; WAP, MAC filtering, SSID broadcast disabled. The portal (modem, gateway) was furnished by my local phone co. No cordless phone, but a wireless raingage and wireless doorbell. Ping time goes all over the scale from one minute to the next(15ms to 240ms). On Sat, Sep 3, 2011 at 5:56 AM, Max Dillon meadedil...@bellsouth.netwrote: Possible, if you have not set up any security. The wireless router may be keeping a log of who has been logging in. Max -- Hendrik Fay heni...@ozemail.com.au wrote: I was going to ask if someone might be patching into the wifi? Tim C wrote: If you are having a software reset in the access point it can flap the driver fast enough for you not to lose association. In other words, don't discount the router and/or its power supply. For a quick test, open a command prompt and issue: ping -t google.com and leave it running for a while (a few minutes at least). If it is the AP resetting internally it will likely be dropping pings in an obvious pattern. If not, you can run around the house and see if the ping times get worse as you get closer to something. I am assuming you only have one AP, and there are no neighbors who have the same AP name (SSID). Best, -Tim also curious what kind of access point/router it is -- Hans Neureiter, Katy, TX '82 300SD ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] OT: DCM speakers
Dan Penoff wrote: Found a set of DCM Time Frame 1000s locally. Original owner, still has boxes, etc., like new condition. Asking $300. I will go look at them this weekend. Is the price in line? 250/275s are dirt cheap, I paid $42 for two of my 275s and $36 for the other two, all in very good to excellent shape. 350/400s seem to be $50-100. 500s/600s tend to go $100-150, and few people keep the boxes (but I've still got boxes for any speakers I bought new). 700s seem to go around $200, sometimes a little more, unless you find them at Goodwill (usually after a cat thought they were giant scratching posts) for $50. Don't see them on eBay as often as the 500s and 600s. 1000s are the top of the line, I never see them for sale. You can look for online reviews, but if I recall correctly it's said they are better than windows at reproducing the sound spectrum but inferior to windows at projecting the soundstage throughout the room. I'd audition them, make sure every driver is emitting sound. If he's the original owner, he probably knows that the DCM logos go to the inside of the pair. Serial numbers should be consecutive on a factory matched pair. It never hurts to offer a guy $250 if he's asking $300. If there's a fuse, driver, or crossover problem, offer him $100 or $150. You can get used drivers on eBay, fuses are easy, and recapping a crossover shouldn't be a big deal for you (less of a deal than getting to the crossover anyway. Mitch. ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] OT: DCM speakers
I'd been trying to remember which of the 500/600/700 were the most popular, this article and the comments seem to say it was the 600: http://hificollector.blogspot.com/2009/02/speakers-dcm-timeframe-1000.html A forum thread I found on the 1000: http://audiokarma.org/forums/showthread.php?t=75978 ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Cruising the hood in Londonstan
I'm lead to understand that packing heat in the Queens dominion is very much against the law and will cause you all manner of trouble. Isn't this why the good citizens were forced to defend themselves with bats and brooms in the recent troubles in London? I think such foolishness is why we had that little dustup back in 1776 what? On Sat, Sep 3, 2011 at 4:29 AM, Mitch Haley m...@voyager.net wrote: Mitch Haley wrote:! Funny think is, Think? That'll teach me to email at 7 in the morning. __**_ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/**archive/http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/**mailman/listinfo/mercedes_**okiebenz.comhttp://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] HPs New CEO
Not too many the second time around. Apple has done nothing but grow and be the object of M$ and many computer (Cellphone, tablet) maker's envy. On Fri, 2 Sep 2011 23:34:48 -0500 Dieselhead 126die...@gmail.com wrote: Good Catch Gerry, I had forgotten his origin. Seems like another MBA/bean counter with no understanding of employee/customer relations, or how to create a good customer experience. He could learn a thing or two from Jobs. Not that Jobs has been perfect -- Apple has had their share of faux pas, haven't they? Craig ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] OT - WiFi
How old is it? The cheaper wireless routers, which is typically what a telephone company will provide, only live a few years. You can replace it with similar quality for half the cost, and configure it to work with their network. Max -- Sent from my Android phone with K-9 Mail. Please excuse my brevity. Hans Neureiter diese...@gmail.com wrote: The network is secure; WAP, MAC filtering, SSID broadcast disabled. The portal (modem, gateway) was furnished by my local phone co. No cordless phone, but a wireless raingage and wireless doorbell. Ping time goes all over the scale from one minute to the next(15ms to 240ms). On Sat, Sep 3, 2011 at 5:56 AM, Max Dillon meadedil...@bellsouth.netwrote: Possible, if you have not set up any security. The wireless router may be keeping a log of who has been logging in. Max -- Hendrik Fay heni...@ozemail.com.au wrote: I was going to ask if someone might be patching into the wifi? Tim C wrote: If you are having a software reset in the access point it can flap the driver fast enough for you not to lose association. In other words, don't discount the router and/or its power supply. For a quick test, open a command prompt and issue: ping -t google.com and leave it running for a while (a few minutes at least). If it is the AP resetting internally it will likely be dropping pings in an obvious pattern. If not, you can run around the house and see if the ping times get worse as you get closer to something. I am assuming you only have one AP, and there are no neighbors who have the same AP name (SSID). Best, -Tim also curious what kind of access point/router it is -- Hans Neureiter, Katy, TX '82 300SD _ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Cruising the hood in Londonstan
England simply needs to find a new penal colony to send these unpleasant thugs away! Load up the prison ship and send them off, that solution worked well for centuries Max (may be a descendant of English thugs) -- Sent from my Android phone with K-9 Mail. Please excuse my brevity. G Mann g2ma...@gmail.com wrote: I'm lead to understand that packing heat in the Queens dominion is very much against the law and will cause you all manner of trouble. Isn't this why the good citizens were forced to defend themselves with bats and brooms in the recent troubles in London? I think such foolishness is why we had that little dustup back in 1776 what? On Sat, Sep 3, 2011 at 4:29 AM, Mitch Haley m...@voyager.net wrote: Mitch Haley wrote:! Funny think is, Think? That'll teach me to email at 7 in the morning. _ **_ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/**archive/http://www.okiebenz.com/archive/; To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/**mailman/listinfo/mercedes_**okiebenz.comhttp://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com; _ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] HPs New CEO
You should also remember that HP started out as an instrumentation/ analysis business, too. That part was split off into a separate company almost ten years ago (Agilent Technologies or something stupid like that) so the death of the rest of the company doesn't surprise me. The instrumentation/analytical stuff was the heart of HP. Fabulous quality, although not cheap, best stuff out there by far. All computer driven, but they sorta forgot all that in the haste to steal money out of the company, I guess. There is a reason why Fiorina lost her senatorial contest -- she is a very poor leader and a worse administrator! She destroyed two very highly reguarded companies for reasons she could never articulate (probably something she learned in Business School). Sad. Just in case anyone wonders why the US economy is not doing well, all you gotta do is look to Corporate America to see where the problem is -- they dump all the money making dirty stuff in favor of standing around in fake luxury sending important memos and borrowing money. Peter ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] HPs New CEO
Carly was a sales babe with ATT and because she was sorta half hot and could talk a good line, she got promoted up the ladder. Then HP brings in the sales babe to run the company, with the predictable consequences. --R On 9/3/11 10:38 AM, Peter Frederick wrote: There is a reason why Fiorina lost her senatorial contest -- she is a very poor leader and a worse administrator! She destroyed two very highly reguarded companies for reasons she could never articulate (probably something she learned in Business School). Sad. ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] OT - Natural Gas generators
I'm wondering if this would be too complicated to power with one generator and auto cut-over switches? Perhaps two small generators would be better? During the construction and tear-up of our electrical feed I rectified our two-meter situation and now the wellhouse is on the single meter. I still, however, did not get what I want, which is a single cutoff switch, so that I could tie into the system and power both the well and the house at the same time. (With the eventual plan being a generator hut out by the main meter/switch-that-I-didn't-get.) So we still have two generators. One for/at the house, one for/at the well. -- Jim ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] W116, more fuel leaks
Would it be possible to just remove the leaky pump and use a bolt to plug the hole as a temporary fix? I don't know. Making a new air seal gasket was my temporary fix. In 2006. Sold the car that year, it's probably still working. See: http://userweb.windwireless.net/~jimc/mb240d.html#31Mar2006 -- Jim ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Yo Kleb -- how much for a bundt?
well he has to sort out getting one, have not heard. I also have a brake caliper I need to get back to Rusty, maybe I should get it to you and you can take it, costs like $15 to ship --R On 9/3/11 7:07 AM, Max Dillon wrote: Rich, sorry to hear you won't be there, should be no problem bringing a wheel back as long as Kaleb cleans it up properly. We'll be in the sedan, it probably will ride in the trunk with the luggage. Max ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Cruising the hood in Londonstan
I vote it be israel. They could use some thugs there Sent from my iPad On Sep 3, 2011, at 6:52, Max Dillon meadedil...@bellsouth.net wrote: England simply needs to find a new penal colony to send these unpleasant thugs away! Load up the prison ship and send them off, that solution worked well for centuries Max (may be a descendant of English thugs) -- Sent from my Android phone with K-9 Mail. Please excuse my brevity. G Mann g2ma...@gmail.com wrote: I'm lead to understand that packing heat in the Queens dominion is very much against the law and will cause you all manner of trouble. Isn't this why the good citizens were forced to defend themselves with bats and brooms in the recent troubles in London? I think such foolishness is why we had that little dustup back in 1776 what? On Sat, Sep 3, 2011 at 4:29 AM, Mitch Haley m...@voyager.net wrote: Mitch Haley wrote:! Funny think is, Think? That'll teach me to email at 7 in the morning. _ **_ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/**archive/http://www.okiebenz.com/archive/; To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/**mailman/listinfo/mercedes_**okiebenz.comhttp://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com; _ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
[MBZ] 124 blue interior - parting out - pristine condition
I don't often post, but have been a long time (going back to mbz.org) follower. I have a 1990 124 white on blue parts car that got totaled a few years back, in what should have been a relatively minor mishap, except it bent the frame. I have used the power train to revive another 124, but SWMBO now wants it off the driveway, since there is another 124 parts car on the horizon. So, i will be parting out a pristine blue interior from a well kept car with 90K that still has the MB factory warning decals on the doors, visors etc. (Car has been under a cover since it's been off the road there is no sun or water damage. Would much prefer to sell the entire interior (all vinyl parts) in one go, but if not, will consider selling individual seats etc. The sheet metal (doors, rear panels and front fenders are banged up; there is a pair of headlights, turn signals (yellow not clear) with the plastic windows in great shape as well. Not really interested in selling the interior electrical items and gages, which i plan to keep, still have 2 other 124s on the road. This is an opportunity to refresh a blue interior 124 sedan, i'm not looking to get rich off this and am offering it to this list, which from time to time has been extremely helpful with great advise, before considering ebay or other venues. Car is located outside of Trenton NJ and of course would much prefer pick up than having to mess with packing and (your) truckers. Feel free to contact me off list at mb30...@yahoo.com danny goldberg 68 200d 126k my toy 85 300d 170K (spare car) 90 300d 84K (donor car RIP) 91 300d 381K miles, my daily driver 93 300d 190K (resurrected by donor car) 96 Subaru Legacy 103K (wife's car) ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Yo Kleb -- how much for a bundt?
Did you ever figure out the size? Should be cast on inside if the spare, part of the code that tells the off-set. Regarding the caliper return, I'm half tempted to bring all my excess parts, new stuff that was wrong for one reason or another, and either set up a flee market table to see if I can recoup some fuel money or maybe trade it back to Rusty for credit on my next order. We are still planning the trip, well, maybe just me, SWMBO didn't seem too enthusiastic about it when I reminded her this a.m. I just returned from a short week in Italy, drove about 200 km in a Renault rental, diesel with 6 speed transmission. Fast enough, plenty of room, got 41 mpg in combined driving. Mostly I was in town, but made two trips between Naples and Gaeta. Once I figured out where the speed cameras were on the autostrada, I started keeping pace with the faster cars; let's just say I drove pretty fast but not as fast as some. Max -- Sent from my Android phone with K-9 Mail. Please excuse my brevity. Rich Thomas richthomas79td...@constructivity.net wrote: well he has to sort out getting one, have not heard. I also have a brake caliper I need to get back to Rusty, maybe I should get it to you and you can take it, costs like $15 to ship --R On 9/3/11 7:07 AM, Max Dillon wrote: Rich, sorry to hear you won't be there, should be no problem bringing a wheel back as long as Kaleb cleans it up properly. We'll be in the sedan, it probably will ride in the trunk with the luggage. Max _ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] OT - Natural Gas generators
On your Main entry panel you have a Master breaker . Have your electrician replace this with a double throw breaker [come to the electrical supply house, bring money. For a 200 amp service expect to pay above $800 for one.]. These type breakers are ON/OFF/ON so you can dedicate ON to power grid. and the other ON to the generator connection. It's manual so you have to physically throw the switch but it puts you into total control of your choice of power. With such a Master Breaker in place you disconnect from the power grid [very desireable] and reconnect to your generator without having to fuss. All your wiring remains the same. HTH, Grant... On Sat, Sep 3, 2011 at 7:50 AM, Jim Cathey j...@windwireless.net wrote: I'm wondering if this would be too complicated to power with one generator and auto cut-over switches? Perhaps two small generators would be better? During the construction and tear-up of our electrical feed I rectified our two-meter situation and now the wellhouse is on the single meter. I still, however, did not get what I want, which is a single cutoff switch, so that I could tie into the system and power both the well and the house at the same time. (With the eventual plan being a generator hut out by the main meter/switch-that-I-didn't-**get.) So we still have two generators. One for/at the house, one for/at the well. -- Jim __**_ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/**archive/http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/**mailman/listinfo/mercedes_**okiebenz.comhttp://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] OT - Natural Gas generators
On your Main entry panel you have a Master breaker . Have your electrician replace this with a double throw breaker [come to the electrical supply house, bring money. For a 200 amp service expect to pay above $800 for one.]. That, in essence is what I wanted but didn't get out there, there's only a meter. I _have_ a gigantic 400A Westinghouse knife switch in a box, old surplus, and some 200A transfer switches, also surplus. I know that physically I could flange it up somehow, but 'code' would be a different animal. All I really need is a DPDT Throw-the-switch-Igor knife switch out there! -- Jim ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] HPs New CEO
Craig diese...@pisquared.net writes: Not that Jobs has been perfect -- Apple has had their share of faux pas, haven't they? Jobs has had MANY failures in his lifetime. He really hit his stride on his return to Apple. Allan -- 1983 300D 1979 300SD ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] OT - Natural Gas generators
One thing that makes the knife switch a big problem over a breaker or a transfer switch is that it is not load rated, meaning that it is not intended to be operated while under load. Doing so can damage and potentially destroy it. You would have to be sure that everything was turned off before operating it. That's one of the reasons why transfer switches are expensive - they are load rated for the amperage rating. Dan Sent from my iPhone On Sep 3, 2011, at 12:58 PM, Jim Cathey j...@windwireless.net wrote: On your Main entry panel you have a Master breaker . Have your electrician replace this with a double throw breaker [come to the electrical supply house, bring money. For a 200 amp service expect to pay above $800 for one.]. That, in essence is what I wanted but didn't get out there, there's only a meter. I _have_ a gigantic 400A Westinghouse knife switch in a box, old surplus, and some 200A transfer switches, also surplus. I know that physically I could flange it up somehow, but 'code' would be a different animal. All I really need is a DPDT Throw-the-switch-Igor knife switch out there! -- Jim ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] HPs New CEO
For sure: Lisa NeXT Apple gaming console and numerous others. Easy to find them if you poke around. MacDan Sent from my iPhone On Sep 3, 2011, at 1:01 PM, Allan Streib str...@cs.indiana.edu wrote: Craig diese...@pisquared.net writes: Not that Jobs has been perfect -- Apple has had their share of faux pas, haven't they? Jobs has had MANY failures in his lifetime. He really hit his stride on his return to Apple. Allan -- 1983 300D 1979 300SD ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] HPs New CEO
I believe Scully did the right thing in firing Jobs. He was in the process of killing the company by meddling in the hardware, a subject upon which he has very strange and useless ideas (he wasn't the circuit guy, Wozniak was before his accident and serious brain injury). he was also pretty clueless about how to run a major company and was refusing to accomodate the business types required to do so. Running his own startups playing with the big boys (Disney, for instance) beat enough of the adolescent snottiness out of him to permit his to be CEO again -- without the failure of NEXT and the gross reduction in arrogance, he'd have killed Apple off. Remember that all the mess they were in a few years later was mostly his stuff, not stupid people making stupid decisions as he liked to characterize it. Remember, this was the guy the development team had to make a fake logic board for because he kept screwing with the component layout -- wasn't functional enough for him. The fact that the chips had to be physically connected seemed to escape him. When he came back, the company had built up an operating culture independent of him, particularly the hardware end, and had a new and highly effective design team in place. Jobs got to do what he does best -- cheerlead and sales -- and left the actual development to people who knew what they were doing. Where Apple goes from here is anyone's guess. They are now a toy company, and all it takes with toys is for the culture to change when they aren't looking for them to vanish in a heartbeat. Peter ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] OT - Natural Gas generators
What Dan said... X2. A knife switch under load makes sparks... perhaps enough to jump to you through the enclosure... not good. Perhaps to cause an electrical explosion certainly enough to damage connections at the switch. Let me add a suggestion please. If you set up a switch panel using the ON/OFF/ON breaker arrangement [or any other for that matter} POST A WRITTEN SET OF DIRECTIONS AT THE SWITCH... WITH PICTURES . SHMBO or others will need them as will you sooner or later just to keep everything Kosher ie. it's been a year since the power was out and what did I do to make this work HTH, Grant... On Sat, Sep 3, 2011 at 10:07 AM, Dan Penoff lwb...@yahoo.com wrote: One thing that makes the knife switch a big problem over a breaker or a transfer switch is that it is not load rated, meaning that it is not intended to be operated while under load. Doing so can damage and potentially destroy it. You would have to be sure that everything was turned off before operating it. That's one of the reasons why transfer switches are expensive - they are load rated for the amperage rating. Dan Sent from my iPhone On Sep 3, 2011, at 12:58 PM, Jim Cathey j...@windwireless.net wrote: On your Main entry panel you have a Master breaker . Have your electrician replace this with a double throw breaker [come to the electrical supply house, bring money. For a 200 amp service expect to pay above $800 for one.]. That, in essence is what I wanted but didn't get out there, there's only a meter. I _have_ a gigantic 400A Westinghouse knife switch in a box, old surplus, and some 200A transfer switches, also surplus. I know that physically I could flange it up somehow, but 'code' would be a different animal. All I really need is a DPDT Throw-the-switch-Igor knife switch out there! -- Jim ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] HPs New CEO
Well stated, Peter. I just finished listening to a biography of Jobs, and wasn't a bit surprised at how he screwed up NeXT and nearly trashed Pixar. When he realized that he had to leave some things to the people who knew their discipline best things improved significantly. I have a couple of friends who work at 1 Infinite Loop, and while they are definitely pro-Steve, they don't drink the Kool-Aid. They have spoken privately about some of the conflicts he created internally by micromanaging. In fairness, they are quick to point out his innate sense of drilling down to the simplest approach in many cases. Probably the best way this shows up is in their product documentation. For the most part, there is none, or a very minimal amount. Things should just work. MacDan Sent from my iPhone On Sep 3, 2011, at 1:15 PM, Peter Frederick psf...@earthlink.net wrote: I believe Scully did the right thing in firing Jobs. He was in the process of killing the company by meddling in the hardware, a subject upon which he has very strange and useless ideas (he wasn't the circuit guy, Wozniak was before his accident and serious brain injury). he was also pretty clueless about how to run a major company and was refusing to accomodate the business types required to do so. Running his own startups playing with the big boys (Disney, for instance) beat enough of the adolescent snottiness out of him to permit his to be CEO again -- without the failure of NEXT and the gross reduction in arrogance, he'd have killed Apple off. Remember that all the mess they were in a few years later was mostly his stuff, not stupid people making stupid decisions as he liked to characterize it. Remember, this was the guy the development team had to make a fake logic board for because he kept screwing with the component layout -- wasn't functional enough for him. The fact that the chips had to be physically connected seemed to escape him. When he came back, the company had built up an operating culture independent of him, particularly the hardware end, and had a new and highly effective design team in place. Jobs got to do what he does best -- cheerlead and sales -- and left the actual development to people who knew what they were doing. Where Apple goes from here is anyone's guess. They are now a toy company, and all it takes with toys is for the culture to change when they aren't looking for them to vanish in a heartbeat. Peter ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] OT - Natural Gas generators
G Mann wrote: Let me add a suggestion please. If you set up a switch panel using the ON/OFF/ON breaker arrangement [or any other for that matter} POST A WRITTEN SET OF DIRECTIONS AT THE SWITCH... WITH PICTURES I've seen mechanical interlocks offered for sale which are basically a sliding chunk of sheet steel that prevents you from turning a circuit breaker (connected to the generator) on unless the main breaker is off. Anybody who can cut sheet metal can make one of those and have it work, provided that the generator backfeeds the panel through one of the breakers closest to the main. Does anybody know if those mechanical interlocks are code legal? (of course, backfeeding the panel through a 60A breaker doesn't work if you are trying to run the house on a 200A genset, but the 7-15kw gensets most of us are thinking about would work through a 30-60A breaker. ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] HPs New CEO
Apple products are good (I'm typing this on a MDD G4 dual, for instance, still in use with no trouble other than a flaky memory stick giving me fits), but there are times when I NEED to know things that Apple choses to withhold from their users (such as actual specifications). I really do like the it just works parts, I can't stand the I'll decide for you part! Now if they would just stop doing unnecessary fancy crap like ultrathin cases and stick with more standard stuff and bring the price down to a rational level, things would be great. I resent paying a whopping premium for generic hardware in a very expensive case. And using fans to cool things BEFORE they blister the MOBO would be a good idea, too. I won't mention the ongoing problems with cheap manufacture and cheating on the solder, which causes the components to come loose and the logic boards to fail. Peter ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] OT - Natural Gas generators
Many of the low cost and low amperage transfer switches use exactly that type of interlock. Nothing more than some sheet metal as a toggle that prevents closing of both breakers simultaneously. Dan Sent from my iPhone On Sep 3, 2011, at 1:58 PM, Mitch Haley m...@voyager.net wrote: G Mann wrote: Let me add a suggestion please. If you set up a switch panel using the ON/OFF/ON breaker arrangement [or any other for that matter} POST A WRITTEN SET OF DIRECTIONS AT THE SWITCH... WITH PICTURES I've seen mechanical interlocks offered for sale which are basically a sliding chunk of sheet steel that prevents you from turning a circuit breaker (connected to the generator) on unless the main breaker is off. Anybody who can cut sheet metal can make one of those and have it work, provided that the generator backfeeds the panel through one of the breakers closest to the main. Does anybody know if those mechanical interlocks are code legal? (of course, backfeeding the panel through a 60A breaker doesn't work if you are trying to run the house on a 200A genset, but the 7-15kw gensets most of us are thinking about would work through a 30-60A breaker. ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] OT - Natural Gas generators
On Sat, 03 Sep 2011 13:58:29 -0400 Mitch Haley m...@voyager.net wrote: G Mann wrote: Let me add a suggestion please. If you set up a switch panel using the ON/OFF/ON breaker arrangement [or any other for that matter} POST A WRITTEN SET OF DIRECTIONS AT THE SWITCH... WITH PICTURES I've seen mechanical interlocks offered for sale ... Does anybody know if those mechanical interlocks are code legal? I think they are, but when we had our electrical service upgraded recently, I chose to get a purpose-made, manual transfer switch. I bought the Reliance Controls TWB2010DR from CSN Stores: http://www.csnstores.com/Reliance-Controls-TWB-4-8-Circuit-200Amp-Transfer-Panel-Link-for-Generator-up-to-25000-Watt-TWB2010DR-RLC1055.html We had a 60 A service and upgraded to a 200 A service. This panel replaced the 200 A outside disconnect my electrician was going to have to install, at a price not much more than the outside disconnect. I had done searching around the web, so when I saw CSN Stores, we will match any competitor, I went with them. The price I found searching was $361 plus shipping. CSN Stores sold it to me for $361 with free shipping. My electrician was pleased with the transfer switch and said it was well made. I sized it so it will take the full output of our Kato generator (whenever I get that hooked up to a prime mover). It will certainly take the 15 A output of our homemade, propane-fired generator set that has a Chevette engine as a prime mover. Craig ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] HPs New CEO
Peter Frederick wrote: And using fans to cool things BEFORE they blister the MOBO would be a good idea, too. Remember the Mac Plus? I don't know if the original Mac had it, but the Plus had a connector on the power board that would overheat and die with excessive frequency. How hard is it to specify a plug that can safely handle the current involved, especially when you get to pick every component that draws power? Mitch. ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Jobs boo-boos
For sure: Lisa NeXT Apple gaming console and numerous others. Easy to find them if you poke around... Not to mention the day he ran his Ferrari into a gully off Page Mill Road. RLE ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Phantom Loads, or How to Kill a Battery
On Thu, 1 Sep 2011 19:19:50 -0600 Craig diese...@pisquared.net wrote: On Wed, 31 Aug 2011 22:37:06 -0700 Jim Cathey j...@windwireless.net wrote: Mine (126) all do. Pinched wire? Both sides? Single circuit for all those lamps, so yes. Of course! Why didn't I think of that? (But then I thought the lights on the rear doors were independent of each other.) I had the car on a battery charger and investigated the door switches. On a W124, they come out amazingly easy. I removed and disconnected the the driver's side rear door, but the lights were still on. I then removed the passenger's side. The wires stuck out only a little ways, so I pulled gently on them to get more length. I then re-connected the passenger's side switch and it worked normally. Putting the driver's side switch back in the circuit showed it worked normally. So, I put everything back together working properly, but didn't really fix anything. H. I did replace the bulb above the rear window so we can see if it happens again. Craig ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] HPs New CEO
Dan Penoff lwb...@yahoo.com writes: For sure: Lisa NeXT Apple gaming console and numerous others. Easy to find them if you poke around. NeXT was a failure as a company but the software eventually became OSX (and the development tools became Xcode) so in that sense it was ultimately a success. Allan -- 1983 300D 1979 300SD ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Phantom Loads, or How to Kill a Battery
The delay relay that keeps the lights on after you close the door can go bad and pull enough juice to kill the battery. Totally unrelated to the door switches themselves. Peter ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] HPs New CEO
NeXT was a failure as a company but the software eventually became OSX (and the development tools became Xcode) so in that sense it was ultimately a success. Scully fired Jobs not because the products were a failure, but because he was interfering in the operations of the BUSINESS. NeXt failed for the same reasons -- operated by someone who sneered at and belittled the people who make business operate. Took him a long, long, time to figure out that people aren't going to drop half their take home income on a flaky product that barely operates (or doesn't, in the case of NeXt computers). Believe me, I used OS X 10.1, it sucked really bad. Once he got a couple corporate crashes under his belt, he finally figured out he was neither a software genius nor a hardware designer (you really do have to have the nuts and bolts theoretical background for those things, and he didn't finish college) things got better. We still have to suffer from his attachment to super thin and metal bodied portables and his weird notion that people only use computers for a few minutes at a time (and he hates fans), but at least he's not driving designers insane with irrational demands. He had a fabulous talent for figuring out new products when he's on a short leash to the board and some checks them out first, though. Will be a moot issue soon, as I don't expect him to live more than six months or so. Peter ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Phantom Loads, or How to Kill a Battery
On Sat, 3 Sep 2011 15:17:37 -0500 Peter Frederick psf...@earthlink.net wrote: The delay relay that keeps the lights on after you close the door can go bad and pull enough juice to kill the battery. Totally unrelated to the door switches themselves. The delay affects only the front light, not the back. Craig ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] SECOND TRY: Kaleb, How much for a W124 Lug Wrench?
We've got a set of 1 drive, hehe... I just use a 1/2 drive impact rated socket and a 2 foot bar, then jump on the end. Works perfect for removal. Torque wrench for setting it. Walt On Sep 2, 2011 11:58 PM, Craig diese...@pisquared.net wrote: On Fri, 02 Sep 2011 21:45:25 -0400 Mitch Haley m...@voyager.net wrote: I broke my old one on a stuck lug. They gave me a new one last winter, which doesn't have the weakness that caused the one I got 10-15 years ago to fail. That's nice to know. When you've got a stuck lug, you want at least 2' of bar. If I'm home when it happens, I go straight to the 3/4 drive 4', which makes the task easy. I would say so. My brother, who was a mechanical engineer for Kenworth, has a set of 3/4, but I sure don't. Craig ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] OT - WiFi
Perhaps try and hook your computer directly into the modem with a cable to see if the wireless router is the problem or the modem. Hendrik Hans Neureiter wrote: The network is secure; WAP, MAC filtering, SSID broadcast disabled. The portal (modem, gateway) was furnished by my local phone co. No cordless phone, but a wireless raingage and wireless doorbell. Ping time goes all over the scale from one minute to the next(15ms to 240ms). ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Cruising the hood in Londonstan (oops should have been marked OT unless her Majesty was driving in a MB)
The problem is these thugs know their human rights inside out and are not afraid to use the law when it suits them. Hendrik who lives in a country that is slowly catching up with the stupidity being shown elsewhere Max Dillon wrote: England simply needs to find a new penal colony to send these unpleasant thugs away! Load up the prison ship and send them off, that solution worked well for centuries Max (may be a descendant of English thugs) ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] SECOND TRY: Kaleb, How much for a W124 Lug Wrench?
Exactly! I only need the breaker bar with the cheater pipe when I get a new-to-me used MB. Seems no one else bothers to torque the lug bolts. I take the wheels off and haul them to the tire store for new tires, work, etc. rather than let them touch the lug bolts. On Sat, Sep 3, 2011 at 5:58 AM, Max Dillon meadedil...@bellsouth.netwrote: I find that when I torque to factory specification, 110nm I believe, the lug wrench is quite sufficient when it comes time to remove a wheel. Max -- -- OK Don 2001 ML320 1992 300D 2.5T 1990 300D 2.5T 1997 Plymouth Grand Voyager ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] SECOND TRY: Kaleb, How much for a W124 Lug Wrench?
On Sat, 3 Sep 2011 22:29:47 -0500 OK Don okd...@gmail.com wrote: Exactly! I only need the breaker bar with the cheater pipe when I get a new-to-me used MB. Seems no one else bothers to torque the lug bolts. I take the wheels off and haul them to the tire store for new tires, work, etc. rather than let them touch the lug bolts. Now that is an interesting idea. Don't you have trouble with the mileage and road-damage guarantees, though? Craig ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] SECOND TRY: Kaleb, How much for a W124 Lug Wrench?
Nope - not at all. I just tell them what the mileage is, and they accept it. At least at the one local store I've had to use it at. On Sat, Sep 3, 2011 at 10:34 PM, Craig diese...@pisquared.net wrote: On Sat, 3 Sep 2011 22:29:47 -0500 OK Don okd...@gmail.com wrote: Exactly! I only need the breaker bar with the cheater pipe when I get a new-to-me used MB. Seems no one else bothers to torque the lug bolts. I take the wheels off and haul them to the tire store for new tires, work, etc. rather than let them touch the lug bolts. Now that is an interesting idea. Don't you have trouble with the mileage and road-damage guarantees, though? Craig -- OK Don 2001 ML320 1992 300D 2.5T 1990 300D 2.5T 1997 Plymouth Grand Voyager ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com