Re: [MBZ] mono-valve source
I went through 3 chinese junk monovalves when I first got my 300D. Rusty finally sent me a real MB part, and it’s worked perfectly for the past 3 years. I also went through 2 chinese (junk) aux pumps at the same time. The motor tends to separate from the pump spraying coolant all over your engine compartment. Buy original MB parts. Jon On Apr 16, 2015, at 8:45 PM, G. M. Brown g_010...@hotmail.com wrote: I purchased a couple mono-valves from the PartsGeek for my '84 300D '85 300TD a few weeks back and found them to be Chinese junk, as the one where I opened the package had a different diameter to the cylindrical shaft such that it was a very difficult fit and didn't work at all so I sent 'em back and received a refund. Now that I've found only one of my mono-valves is bad, I would like to find a reputable source for the correct (i.e., good) mono-valves. Suggestions? See ya', stay healthy all. G. M. Brown Brevard, NC ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] mono-valve source
had a different diameter to the cylindrical shaft such that it was a very difficult fit and didn't work at all The MTC I ended up with didn't fit either. I removed the circlip from the ends of both and transferred the rubber/screen part from the MTC to the bad one that came out of the car. It then fit, and so far seems to be working. The MTC _looked_ identical to what came out of the car, but obviously the QC on the dimensioning was not so good. -- Jim ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Mercedes Approved 229.51 Oil?
On Apr 16, 2015 9:56 PM, Greg Fiorentino gf...@dslnorthwest.net wrote: Anybody ever tried this: I'd feel good about running any oil with MB-Approval. I'm using Liqui Moly in the Volvo (http://www.amazon.com/dp/B005H28X46/) and used the 5W-40 in Dan's 140. Good stuff. Tom ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] mono-valve source
Forgot to mention: Tom Hanson (thomas.han...@mbusa.com mailto:thomas.han...@mbusa.com) at the MB Classic Center is a great resource. If you are a member of the MBCA, you get a discount. His number is: (949) 598-4842 On Apr 16, 2015, at 8:45 PM, G. M. Brown g_010...@hotmail.com wrote: I purchased a couple mono-valves from the PartsGeek for my '84 300D '85 300TD a few weeks back and found them to be Chinese junk, as the one where I opened the package had a different diameter to the cylindrical shaft such that it was a very difficult fit and didn't work at all so I sent 'em back and received a refund. Now that I've found only one of my mono-valves is bad, I would like to find a reputable source for the correct (i.e., good) mono-valves. Suggestions? See ya', stay healthy all. G. M. Brown Brevard, NC ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] mono-valve source
Yep, MB parts only in this case. Bosch stopped making them so a new supplier stepped in, with a higher price. The Chinese ones are junk, as you discovered. Jaime On Thursday, April 16, 2015, G. M. Brown g_010...@hotmail.com wrote: I purchased a couple mono-valves from the PartsGeek for my '84 300D '85 300TD a few weeks back and found them to be Chinese junk, as the one where I opened the package had a different diameter to the cylindrical shaft such that it was a very difficult fit and didn't work at all so I sent 'em back and received a refund. Now that I've found only one of my mono-valves is bad, I would like to find a reputable source for the correct (i.e., good) mono-valves. Suggestions? See ya', stay healthy all. G. M. Brown Brevard, NC ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com -- Jaime Kopchinski http://www.jaimekop.com/ ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Mercedes Approved 229.51 Oil?
Greg Fiorentino wrote: Anybody ever tried this: http://www.amazon.com/Total-188058-5QT-Quartz-5W-30-Engine/dp/B00NFFE4YA The price and reviews look good. Mercedes approved. Yep, it's on the list. http://bevo.mercedes-benz.com/bevolistenmain.php?navigation_path=bevolistenblatt=229.51content_action=show M1 ESP is also on the list, and you can probably find it at W-mart for $29 a jug. We recommend using only products which are distinctly marked with the label indicating the approval of Mercedes-Benz, e.g. “MB-Approval 229.51”. Labels referring e.g. to “MB 229.51” don't have an approval of Mercedes-Benz. Which are listed in the current MB BeVo. Only listed products are tested and approved by Mercedes-Benz. ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] why some people end up in spam
Yahoo, as a security feature won't authenticate emails passed through third party servers. So I can talk to them all day with no result... Curt Sent from Yahoo Mail on Android ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
[MBZ] FW: mono-valve for my '84 300D - $219.30 OUCH!
FYI G. M. Brown Brevard, NC From: thomas.han...@mbusa.com To: g_010...@hotmail.com Subject: RE: mono-valve for my '84 300D Date: Fri, 17 Apr 2015 17:35:02 + Default Disclaimer Daimler AG Hi Glen 000-835-06-44 $219.30 is the MB Club price, and one day away. Thomas Hanson Supervisor, Parts Operations Mercedes-Benz Classic Center Mercedes-Benz USA 9 Whatney, Irvine, CA 92618 Email: thomas.han...@mbusa.com Phone: 949-598-4842 Fax: 949-598-4870 Classic Center Newsletter Signup Facebook | Twitter | G+ | Pinterest | Instagram From: G. M. Brown [mailto:g_010...@hotmail.com] Sent: Friday, April 17, 2015 9:45 AM To: Hanson, Thomas (171) Subject: RE: mono-valve for my '84 300D Yes, the mono-valve insert is what I'm after. Price? Sorry for the lousy pix. Glenn From: thomas.han...@mbusa.com To: g_010...@hotmail.com Subject: RE: mono-valve for my '84 300D Date: Fri, 17 Apr 2015 13:48:33 + There’s still an unresolved production problem on the mono valve for your car. I can only get the insert for them at this time. Thomas Hanson Supervisor, Parts Operations Mercedes-Benz Classic Center Mercedes-Benz USA 9 Whatney, Irvine, CA 92618 Email: thomas.han...@mbusa.com Phone: 949-598-4842 Fax: 949-598-4870 Classic Center Newsletter Signup Facebook | Twitter | G+ | Pinterest | Instagram From: G. M. Brown [mailto:g_010...@hotmail.com] Sent: Friday, April 17, 2015 6:24 AM To: Hanson, Thomas (171) Subject: mono-valve for my '84 300D I recently found Chinese junk mono-valves and sent 'em back as they didn't work. Are good mono-valves available? Thanx. G. M. Brown 183 Fox Cross Drive Brevard, NC 28712 If you are not the addressee, please inform us immediately that you have received this e-mail by mistake, and delete it. We thank you for your support. Default Disclaimer Daimler AG If you are not the addressee, please inform us immediately that you have received this e-mail by mistake, and delete it. We thank you for your support. ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] FW: mono-valve for my '84 300D - $219.30 OUCH!
No one said that maintaining an OLD MB is great working order was going to stay cheap. It is a lot less than buying another car, then having to sort it out . . . On Fri, Apr 17, 2015 at 1:13 PM, G. M. Brown g_010...@hotmail.com wrote: FYI G. M. Brown Brevard, NC From: thomas.han...@mbusa.com Hi Glen 000-835-06-44 $219.30 is the MB Club price, and one day away. -- OK Don NSA: The only branch of government that actually listens to US citizens! *“Travel is fatal to prejudice, bigotry and narrow-mindedness, and many of our people need it sorely on these accounts.”* – Mark Twain There are three kinds of men: The ones that learns by reading. The few who learn by observation. The rest of them have to pee on the electric fence for themselves. WILL ROGERS, *The Manly Wisdom of Will Rogers* 2013 F150, 18 mpg 2012 Passat TDI DSG, 44 mpg 1957 C182A, 12 mpg - but at 150 mph! ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
[MBZ] why some people end up in spam
Here is the clue i get form gmail: Why is this message in Spam? It has a from address in yahoo.com (or substitute your email service) but has failed yahoo.com's required tests for authentication. Dimitri, Curt, MG, Rick Hawkins Java, and Kaleb all end up there. So, you guys should check with Yahoo, AOL, or whoever you use to find out how to be authenticated in their system. I don't think it is a problem with the okiebenz sever. I am getting messages from the server, gmail is marking them as spam. ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] why some people end up in spam
ATTABOY! On Fri, Apr 17, 2015 at 12:20 PM, Curly McLain 126die...@gmail.com wrote: Here is the clue i get form gmail: Why is this message in Spam? It has a from address in yahoo.com (or substitute your email service) but has failed yahoo.com's required tests for authentication. Dimitri, Curt, MG, Rick Hawkins Java, and Kaleb all end up there. So, you guys should check with Yahoo, AOL, or whoever you use to find out how to be authenticated in their system. I don't think it is a problem with the okiebenz sever. I am getting messages from the server, gmail is marking them as spam. ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] FW: mono-valve for my '84 300D - $219.30 OUCH!
You could pay someone to fan you instead. That might be cheaper. On Fri, Apr 17, 2015 at 2:28 PM, OK Don okd...@gmail.com wrote: No one said that maintaining an OLD MB is great working order was going to stay cheap. It is a lot less than buying another car, then having to sort it out . . . On Fri, Apr 17, 2015 at 1:13 PM, G. M. Brown g_010...@hotmail.com wrote: FYI G. M. Brown Brevard, NC From: thomas.han...@mbusa.com Hi Glen 000-835-06-44 $219.30 is the MB Club price, and one day away. -- OK Don NSA: The only branch of government that actually listens to US citizens! *“Travel is fatal to prejudice, bigotry and narrow-mindedness, and many of our people need it sorely on these accounts.”* – Mark Twain There are three kinds of men: The ones that learns by reading. The few who learn by observation. The rest of them have to pee on the electric fence for themselves. WILL ROGERS, *The Manly Wisdom of Will Rogers* 2013 F150, 18 mpg 2012 Passat TDI DSG, 44 mpg 1957 C182A, 12 mpg - but at 150 mph! ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] FW: mono-valve for my '84 300D - $219.30 OUCH!
OK Don wrote: No one said that maintaining an OLD MB is great working order was going to stay cheap. It is a lot less than buying another car, then having to sort it out . . . And cheaper in the long run than getting a new one. I thought about assuming a lease on a Cruze for $3 a day. Decided it would be cheaper to drive a W140 V-8 with double the fuel consumption. ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] FW: mono-valve for my '84 300D - $219.30 OUCH!
000-835-06-44 $219.30 is the MB Club price, and one day away. Seems like $200 should get you a whole monovalve, doesn't it? http://mbnorthlakeparts.com/parts/index.cfm?searchText=000-835-06-44make=Mercedes-Benzaction=oePartSearchsiteid=217496 ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] FW: mono-valve for my '84 300D - $219.30 OUCH!
Mitch Haley wrote: I thought about assuming a lease on a Cruze for $3 a day. Decided it would be cheaper to drive a W140 V-8 with double the fuel consumption. Arrgh. Should read $5 a day ($150 per month, plus I'd have to insure it) Mitch. ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] mono-valve source
With all the CNC machining capacity, it seems to me that someone, somewhere, should be able to remake the valve to take O rings with a new design and sell replacement parts that actually work. This problem is a matter of when will it happen, not if it will happen.. known design weak point. Surely, it would be worth writing a CNC machining program to make a better part from a block of something invincible. Sounds like a project for Rich! Should we volunteer him? ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] mono-valve source
I second that nomination ! .. hahaha.. Amazing how painless that was... for me.. On Fri, Apr 17, 2015 at 9:23 PM, Curly McLain 126die...@gmail.com wrote: With all the CNC machining capacity, it seems to me that someone, somewhere, should be able to remake the valve to take O rings with a new design and sell replacement parts that actually work. This problem is a matter of when will it happen, not if it will happen.. known design weak point. Surely, it would be worth writing a CNC machining program to make a better part from a block of something invincible. Sounds like a project for Rich! Should we volunteer him? ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
[MBZ] FW: mono-valve insert repair kit for my '84 300D
For those who may be interested in the mono-valve insert repair kit for the W123 cars, here's a comment from someone at Autohaus indicating that they're all Chinese junk now. G. M. brown Brevard, NC Date: Fri, 17 Apr 2015 13:36:32 -0700 From: pa...@autohausaz.com To: g_010...@hotmail.com Subject: Re: mono-valve insert repair kit for my '84 300D Dear G.M. Thank you for submitting your part inquiry with AutohausAZ. The MTC mono valve repair kit we carry is unfortunately manufactured in China. Unfortunately it would seem that the same Chinese manufacturing facility is making the same part for all distributors and the original Bosch part is no longer available. Best Regards, Paul, Parts Department Local (602) 276-9402 - Toll Free (800) 240-4620 pa...@autohausaz.com - http://www.AutohausAZ.com On 4/17/2015 11:11 AM, G. M. Brown wrote: I recently purchased mono-valve inserts from another supplier and found them to be Chinese junk which did not work and were returned for a refund, can you confirm that the mono-valve insert repair kit (http://www.autohausaz.com/search/product.aspx?sid=4yhrke55vhkf0hqevgfral55makeid=800016@Mercedesmodelid=1193789@300DTyear=1984cid=24@AC%20%26%20Heat%20-%20Climate%20Controlgid=12607@HVAC%20Mono%20Valve%20Repair%20Kit ) which you have listed is not the same Chinese junk? THanx. G. M. Brown 183 Fox Cross Drive Brevard, NC 28712 ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Mercedes Approved 229.51 Oil?
Remember, just because it's on a MB list doesn't mean it's ok for every MB. That's a modern diesel rated oil. For modern Mercedes. Jaime On Thursday, April 16, 2015, Greg Fiorentino gf...@dslnorthwest.net wrote: Anybody ever tried this: http://www.amazon.com/Total-188058-5QT-Quartz-5W-30-Engine/dp/B00NFFE4YA/ref =sr_1_1?s=automotiveie=UTF8qid=1429238557sr=1-1keywords=motor+oil+229.51 The price and reviews look good. Mercedes approved. Greg ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com -- Jaime Kopchinski http://www.jaimekop.com/ ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] mono-valve source
I think the issue with the MTC (Chinese) parts are the rubber quality. Coolant gets past the sealing and into the moving parts of the valve. This causes the valve to get somewhat hydrolocked and not pulse open and closed properly, resulting it too much or too little heat. The failure of an original part was a tear in the rubber at its thinnest section, resulting in the same. Jaime On Friday, April 17, 2015, Jim Cathey jim.cathey...@gmail.com wrote: had a different diameter to the cylindrical shaft such that it was a very difficult fit and didn't work at all The MTC I ended up with didn't fit either. I removed the circlip from the ends of both and transferred the rubber/screen part from the MTC to the bad one that came out of the car. It then fit, and so far seems to be working. The MTC _looked_ identical to what came out of the car, but obviously the QC on the dimensioning was not so good. -- Jim ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com -- Jaime Kopchinski http://www.jaimekop.com/ ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] FW: mono-valve insert repair kit for my '84 300D
Looks like there is an opportunity for one of you enterprising folks to manufacture quality pasts for 123/126 cars at a reasonable price. On Fri, Apr 17, 2015 at 9:19 PM, G. M. Brown g_010...@hotmail.com wrote: For those who may be interested in the mono-valve insert repair kit for the W123 cars, here's a comment from someone at Autohaus indicating that they're all Chinese junk now. G. M. brown Brevard, NC Date: Fri, 17 Apr 2015 13:36:32 -0700 From: pa...@autohausaz.com To: g_010...@hotmail.com Subject: Re: mono-valve insert repair kit for my '84 300D Dear G.M. Thank you for submitting your part inquiry with AutohausAZ. The MTC mono valve repair kit we carry is unfortunately manufactured in China. Unfortunately it would seem that the same Chinese manufacturing facility is making the same part for all distributors and the original Bosch part is no longer available. Best Regards, Paul, Parts Department Local (602) 276-9402 - Toll Free (800) 240-4620 pa...@autohausaz.com - http://www.AutohausAZ.com On 4/17/2015 11:11 AM, G. M. Brown wrote: I recently purchased mono-valve inserts from another supplier and found them to be Chinese junk which did not work and were returned for a refund, can you confirm that the mono-valve insert repair kit ( http://www.autohausaz.com/search/product.aspx?sid=4yhrke55vhkf0hqevgfral55makeid=800016@Mercedesmodelid=1193789@300DTyear=1984cid=24@AC%20%26%20Heat%20-%20Climate%20Controlgid=12607@HVAC%20Mono%20Valve%20Repair%20Kit ) which you have listed is not the same Chinese junk? THanx. G. M. Brown 183 Fox Cross Drive Brevard, NC 28712 ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com -- OK Don NSA: The only branch of government that actually listens to US citizens! *“Travel is fatal to prejudice, bigotry and narrow-mindedness, and many of our people need it sorely on these accounts.”* – Mark Twain There are three kinds of men: The ones that learns by reading. The few who learn by observation. The rest of them have to pee on the electric fence for themselves. WILL ROGERS, *The Manly Wisdom of Will Rogers* 2013 F150, 18 mpg 2012 Passat TDI DSG, 44 mpg 1957 C182A, 12 mpg - but at 150 mph! ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] mono-valve source
Jaime wrote: I think the issue with the MTC (Chinese) parts are the rubber quality. Unfortunately, that statement is applicable to ALL rubber parts made in China, not just mono-valve inserts. Parts (and tools) manufactured in Taiwan are of a much higher quality than those coming from mainland China. Rick ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] mono-valve source
With all the CNC machining capacity, it seems to me that someone, somewhere, should be able to remake the valve to take O rings with a new design and sell replacement parts that actually work. This problem is a matter of when will it happen, not if it will happen.. known design weak point. Surely, it would be worth writing a CNC machining program to make a better part from a block of something invincible. On Fri, Apr 17, 2015 at 7:47 PM, Jaime Kopchinski jaime...@gmail.com wrote: I think the issue with the MTC (Chinese) parts are the rubber quality. Coolant gets past the sealing and into the moving parts of the valve. This causes the valve to get somewhat hydrolocked and not pulse open and closed properly, resulting it too much or too little heat. The failure of an original part was a tear in the rubber at its thinnest section, resulting in the same. Jaime On Friday, April 17, 2015, Jim Cathey jim.cathey...@gmail.com wrote: had a different diameter to the cylindrical shaft such that it was a very difficult fit and didn't work at all The MTC I ended up with didn't fit either. I removed the circlip from the ends of both and transferred the rubber/screen part from the MTC to the bad one that came out of the car. It then fit, and so far seems to be working. The MTC _looked_ identical to what came out of the car, but obviously the QC on the dimensioning was not so good. -- Jim ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com -- Jaime Kopchinski http://www.jaimekop.com/ ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
[MBZ] Subject: Re: Hillary for Prez
I'm late for this post since I was away but she's known as Hillary The Lunt .for Lesbian you know what...I should apply for the domain name ?? Bob [Actions speaks louder than words] ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com