Re: [MBZ] Sharpening drill bits

[G Mann via Mercedes]

None of these tools tested gave any mention to the most important item in
getting drills sharp.
That is, always dress the grinding wheel so that it is clean and flat,
also, grinding wheels come with many grit selections. Many who try to
sharpen drill bits give no thought to what grit they are using, or what
type of wheel composition they have.

To put a fine cutting edge on the drill you are sharpening, once the
profile is correct at the cutting anvil, the bit should be final finished
at the cutting planes with a fine grit stone in the grinder.at

Last tip. Watch the video again and specifically observe the cutting chips
each drill is making. Notice the drill that cut the fastest produced very
uniform chips... If you sharpen a bit, and it does not give you chips that
look like that bit produced.
Resharpen it, and reshape the cut planes.  Look at a sharp bit that cuts
well... remember what those cutting anvils looked like... Make yours look
just like it. You will be glad you did because it will work.

On Sat, Jan 16, 2021 at 10:49 PM Scott Ritchey via Mercedes <
mercedes@okiebenz.com> wrote:

> I agree. These PF Farm reviews seem thorough and address several things I
> care about.  I suppose the guy must make money from the site because it
> costs him to do these vids.
>
> -Original Message-
> From: Mercedes On Behalf Of Rick Knoble via Mercedes
> Sent: Saturday, January 16, 2021 10:55 PM
> To: Mercedes Discussion List 
> Cc: Rick Knoble 
> Subject: Re: [MBZ] Sharpening drill bits
>
> I didn't watch, but this guy is good.
>
> https://youtu.be/pmr34sUFpK4
>
> Rick
>
>
> 
> From: Mercedes  on behalf of Jerry Herrman
> via Mercedes 
> Sent: Saturday, January 16, 2021 9:52 PM
> To: mercedes@okiebenz.com
> Cc: Jerry Herrman
> Subject: [MBZ] Sharpening drill bits
>
> Thanks for the response on the Harbor Freight drill bits. Kinda what I
> expected to hear. I'll plan to use them for wood, plastic, and aluminum. I
> have quite a collection of drill bits, mostly high speed steel, which are
> now in various stages of dull.
>
> Given that, my next question is about drill bit sharpeners. I have tried a
> couple of those several years ago including a Black and Decker. Took too
> much time to sharpen them and the results were  not satisfactory. I'm
> pretty
> sure some of that was due to the user's (me) lack of skill. Sharpening by
> hand is out of the question for me. I am just a casual user, mostly in
> wood,
> but I'd like some drill bits that will perform well in the drill press with
> metal.
>
> The ad for Drill Doctor seems to suggest that it easy to use and effective.
> What has been your experience with that? Is it worth the price? Does the
> cutting stone need replacement?
>
> Jerry
>
> 240D
>
> ___
> http://www.okiebenz.com
>
> To search list archives http://www.okiebenz.com/archive/
>
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>
> ___
> http://www.okiebenz.com
>
> To search list archives http://www.okiebenz.com/archive/
>
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>
>
> ___
> http://www.okiebenz.com
>
> To search list archives http://www.okiebenz.com/archive/
>
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Sharpening drill bits

[Scott Ritchey via Mercedes]

I agree. These PF Farm reviews seem thorough and address several things I
care about.  I suppose the guy must make money from the site because it
costs him to do these vids.

-Original Message-
From: Mercedes On Behalf Of Rick Knoble via Mercedes
Sent: Saturday, January 16, 2021 10:55 PM
To: Mercedes Discussion List 
Cc: Rick Knoble 
Subject: Re: [MBZ] Sharpening drill bits

I didn't watch, but this guy is good.

https://youtu.be/pmr34sUFpK4

Rick



From: Mercedes  on behalf of Jerry Herrman
via Mercedes 
Sent: Saturday, January 16, 2021 9:52 PM
To: mercedes@okiebenz.com
Cc: Jerry Herrman
Subject: [MBZ] Sharpening drill bits

Thanks for the response on the Harbor Freight drill bits. Kinda what I
expected to hear. I'll plan to use them for wood, plastic, and aluminum. I
have quite a collection of drill bits, mostly high speed steel, which are
now in various stages of dull.

Given that, my next question is about drill bit sharpeners. I have tried a
couple of those several years ago including a Black and Decker. Took too
much time to sharpen them and the results were  not satisfactory. I'm pretty
sure some of that was due to the user's (me) lack of skill. Sharpening by
hand is out of the question for me. I am just a casual user, mostly in wood,
but I'd like some drill bits that will perform well in the drill press with
metal.

The ad for Drill Doctor seems to suggest that it easy to use and effective.
What has been your experience with that? Is it worth the price? Does the
cutting stone need replacement?

Jerry

240D

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Sharpening drill bits

[Peter Frederick via Mercedes]

Drill Dr. works well.  It's not possible to sharpen drills without a proper jig 
of some sort in sizes less than 1/2" even with years of practice.

Rule in the shop was that nothing under 1/4" got sharpened, and usually nothing 
under 1/2".  Spent more sharpening them than they cost, small drills are cheap 
, bought them by the 100.

Small drills are very hard to get properly sharp, any off-set on the center 
will cause them to wander badly and usually break in hand drill use.  Way too 
cheap to mess about with if you are trying to make money with them.
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Sharpening drill bits

[Buggered Benzmail via Mercedes]

Drill Dr 100%. Very easy and quick once you get the hang of it. Solid tool. 

--FT
Sent from iPhone

> On Jan 16, 2021, at 10:53 PM, Jerry Herrman via Mercedes 
>  wrote:
> 
> Drill Doctor

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Sharpening drill bits

[Rick Knoble via Mercedes]

I didn't watch, but this guy is good.

https://youtu.be/pmr34sUFpK4

Rick



From: Mercedes  on behalf of Jerry Herrman via 
Mercedes 
Sent: Saturday, January 16, 2021 9:52 PM
To: mercedes@okiebenz.com
Cc: Jerry Herrman
Subject: [MBZ] Sharpening drill bits

Thanks for the response on the Harbor Freight drill bits. Kinda what I
expected to hear. I'll plan to use them for wood, plastic, and aluminum. I
have quite a collection of drill bits, mostly high speed steel, which are
now in various stages of dull.

Given that, my next question is about drill bit sharpeners. I have tried a
couple of those several years ago including a Black and Decker. Took too
much time to sharpen them and the results were  not satisfactory. I'm pretty
sure some of that was due to the user's (me) lack of skill. Sharpening by
hand is out of the question for me. I am just a casual user, mostly in wood,
but I'd like some drill bits that will perform well in the drill press with
metal.

The ad for Drill Doctor seems to suggest that it easy to use and effective.
What has been your experience with that? Is it worth the price? Does the
cutting stone need replacement?

Jerry

240D

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

[MBZ] Sharpening drill bits

[Jerry Herrman via Mercedes]

Thanks for the response on the Harbor Freight drill bits. Kinda what I
expected to hear. I'll plan to use them for wood, plastic, and aluminum. I
have quite a collection of drill bits, mostly high speed steel, which are
now in various stages of dull.

Given that, my next question is about drill bit sharpeners. I have tried a
couple of those several years ago including a Black and Decker. Took too
much time to sharpen them and the results were  not satisfactory. I'm pretty
sure some of that was due to the user's (me) lack of skill. Sharpening by
hand is out of the question for me. I am just a casual user, mostly in wood,
but I'd like some drill bits that will perform well in the drill press with
metal.

The ad for Drill Doctor seems to suggest that it easy to use and effective.
What has been your experience with that? Is it worth the price? Does the
cutting stone need replacement?

Jerry

240D

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Hey Max

[Craig via Mercedes]

On Sun, 17 Jan 2021 02:07:17 + Rick Knoble via Mercedes
 wrote:

> That's his emails to the list. The items in question are all of his
> posts on the Peach Parts Forum.

Oh. Sorry.


Craig

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Hey Max

[Rick Knoble via Mercedes]

That's his emails to the list. The items in question are all of his posts on 
the Peach Parts Forum.


Rick

From: mercedes@okiebenz.com
Sent: January 16, 2021 7:03 PM
To: mercedes@okiebenz.com
Reply-to: mercedes@okiebenz.com
Cc: diese...@pisquared.net
Subject: Re: [MBZ] Hey Max

On Sun, 10 Jan 2021 20:01:44 -0500 Allan Streib via Mercedes
 wrote:

> I'd check on archive.org. If it was a web forum, and didn't block search
> crawlers, they probably have snapshots that include the old posts.

I have marshall-mail.zip; it's 13 MB, else I would post it.

I can send it to anyone interested off-list.


Craig

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Drill Bit Set

[Curt Raymond via Mercedes]

 I've got a small set of Cle-Line drill bits. A small set that was more 
expensive than every other drill bit I've ever bought put together.They're 
excellent and have easily gone through anything I've asked.
I keep a set of hardware store bits for Angie to use...
-Curt

On Saturday, January 16, 2021, 8:33:42 PM EST, Mitch Haley via Mercedes 
 wrote:  
 
 
I've got some old Vermont Americans that can drill out a grade 8 bolt, 
after the bolt laughs at my 20 year old TiN coated Pittsburgs. I don't 
know if the new ones are better or worse than the set I bought back 
then. I think I paid around $30 for the 29pc set.
For annealed steel, the HF bits are OK.

On 2021-01-16 18:45, Dan Penoff via Mercedes wrote:
> Exactly. I bought them for random use around the northern homestead,
> and my expectations are low. I’ve drilled some soft wood and drywall
> so far and they worked great.


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

  
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Relisted, 1969 220D project

[Curt Raymond via Mercedes]

 Have you guys watched Vice Grips Garage at all?This has got "stupid road trip" 
written all over it. Then a Rustoleum green paint job...
If my stupid idea of living at the farm comes to be I need to be careful, I 
could park a lot of cars in the new barn.
-Curt

On Saturday, January 16, 2021, 1:46:48 PM EST, Dan Penoff via Mercedes 
 wrote:  
 
 Not a lot. W114s don’t get a lot of love, although this one has some things 
going for it such as a manny tranny. By the time you invested the money to 
restore this car you would be well into upside down territory.

-D

> On Jan 16, 2021, at 1:43 PM, Allan Streib via Mercedes 
>  wrote:
> 
> Don't recall the ask last time. What would a nice example be worth?
> 
> https://peoria.craigslist.org/cto/d/peoria-1969-mercedes/7262612817.html
> 
> Allan
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

  
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Drill Bit Set

[Mitch Haley via Mercedes]

I've got some old Vermont Americans that can drill out a grade 8 bolt, 
after the bolt laughs at my 20 year old TiN coated Pittsburgs. I don't 
know if the new ones are better or worse than the set I bought back 
then. I think I paid around $30 for the 29pc set.

For annealed steel, the HF bits are OK.

On 2021-01-16 18:45, Dan Penoff via Mercedes wrote:

Exactly. I bought them for random use around the northern homestead,
and my expectations are low. I’ve drilled some soft wood and drywall
so far and they worked great.



___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Relisted, 1969 220D project

[Buggered Benzmail via Mercedes]

That’s kinda cool. Not entirely unreasonable 

--FT
Sent from iPhone

> On Jan 16, 2021, at 3:07 PM, Allan Streib via Mercedes 
>  wrote:
> 
> nice example

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Hey Max

[Craig via Mercedes]

On Sun, 10 Jan 2021 20:01:44 -0500 Allan Streib via Mercedes
 wrote:

> I'd check on archive.org. If it was a web forum, and didn't block search
> crawlers, they probably have snapshots that include the old posts.

I have marshall-mail.zip; it's 13 MB, else I would post it.

I can send it to anyone interested off-list.


Craig

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Drill Bit Set

[Curt Raymond via Mercedes]

My more recent Harbor Freight purchases have been excellent. It even seems the 
Chinesium stank is gone from there...
Curt

Sent from Yahoo Mail on Android 
 
  On Sat, Jan 16, 2021 at 5:14 PM, Allan Streib via 
Mercedes wrote:   Don't know about those but would be 
interested to hear your experience.

I have found that some HF stuff is complete junk, but other stuff is
quite a good value.

I've been very satisfied with their "Pittsburgh" brand sockets,
wrenches, and screwdrivers.

Allan

Jerry Herrman via Mercedes  writes:

> I bought the 29 piece Harbor Freight Titanium drill bit set for about $11.
> Wondering what I can expect from these drill bits, with particular reference
> to their performance in cutting metal.
>
> Jerry
>
> 82 240D

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

  
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Drill Bit Set

[Curt Raymond via Mercedes]

I've be shocked by the quality of Harbor Freight Christmas tree bits, 
especially on metal.
Years ago I bought some drill bits at a tool show, they were awful...
Curt

Sent from Yahoo Mail on Android 
 
  On Sat, Jan 16, 2021 at 5:09 PM, Jerry Herrman via 
Mercedes wrote:   I bought the 29 piece Harbor Freight 
Titanium drill bit set for about $11.
Wondering what I can expect from these drill bits, with particular reference
to their performance in cutting metal.

Jerry

82 240D

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

  
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Drill Bit Set

[OK Don via Mercedes]

I bought the large set with numbered bits as well - they are junk for the
most part in steel. The number 30 and 40 bits are used for rivets in
aluminum - they didn't last very long, even in the Al. Won't do that again
---

On Sat, Jan 16, 2021 at 4:09 PM Jerry Herrman via Mercedes <
mercedes@okiebenz.com> wrote:

> I bought the 29 piece Harbor Freight Titanium drill bit set for about $11.
> Wondering what I can expect from these drill bits, with particular
> reference
> to their performance in cutting metal.
>
> Jerry
>
> 82 240D
>
> ___
> http://www.okiebenz.com
>
> To search list archives http://www.okiebenz.com/archive/
>
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>

-- 
OK Don

"Whenever you find yourself on the side of the majority, it is time to
pause and reflect." Mark Twain

“Basic research is what I’m doing when I don’t know what I am doing.”  Wernher
Von Braun
2013 F150, 18 mpg
2017 Subaru Legacy, 30 mpg
1957 C182A, 12 mpg - but at 150 mph!
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Drill Bit Set

[Dan Penoff via Mercedes]

Exactly. I bought them for random use around the northern homestead, and my 
expectations are low. I’ve drilled some soft wood and drywall so far and they 
worked great.

-D


> On Jan 16, 2021, at 6:25 PM, Floyd Thursby via Mercedes 
>  wrote:
> 
> I knew a woman who asserted that General Tso was her (great?)grandfather or 
> something. She seemed to know a lot about him and the dish.
> 
> I have those drill bits too, they work fine for random use.  I haven't done 
> anything too difficult with them.  I think I paid $9 for my set a coupla 
> years ago, it's good to have a variety of sizes around.
> 
> --FT
> 
> On 1/16/21 5:42 PM, Andrew Strasfogel via Mercedes wrote:
>> Not even General Tso's Chicken?
>> 
>> On Sat, Jan 16, 2021 at 5:14 PM Dimitri Seretakis via Mercedes <
>> mercedes@okiebenz.com> wrote:
>> 
>>> I’m not buying any more Chinese shit if I can help it.
>>> 
>>> Sent from my iPhone
>>> 
 On Jan 16, 2021, at 5:11 PM, Dan Penoff via Mercedes <
>>> mercedes@okiebenz.com> wrote:
 I bought a set for the second home. While I haven’t drilled any metal
>>> with them yet that I can recall, they seem to work well.
 -D
 
> On Jan 16, 2021, at 5:08 PM, Jerry Herrman via Mercedes <
>>> mercedes@okiebenz.com> wrote:
> I bought the 29 piece Harbor Freight Titanium drill bit set for about
>>> $11.
> Wondering what I can expect from these drill bits, with particular
>>> reference
> to their performance in cutting metal.
> 
> Jerry
> 
> 82 240D
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 
 
 ___
 http://www.okiebenz.com
 
 To search list archives http://www.okiebenz.com/archive/
 
 To Unsubscribe or change delivery options go to:
 http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
 
>>> 
>>> ___
>>> http://www.okiebenz.com
>>> 
>>> To search list archives http://www.okiebenz.com/archive/
>>> 
>>> To Unsubscribe or change delivery options go to:
>>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>>> 
>>> 
>> ___
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> 
> -- 
> --FT
> 
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Drill Bit Set

[Floyd Thursby via Mercedes]

I knew a woman who asserted that General Tso was her (great?)grandfather 
or something. She seemed to know a lot about him and the dish.


I have those drill bits too, they work fine for random use.  I haven't 
done anything too difficult with them.  I think I paid $9 for my set a 
coupla years ago, it's good to have a variety of sizes around.


--FT

On 1/16/21 5:42 PM, Andrew Strasfogel via Mercedes wrote:

Not even General Tso's Chicken?

On Sat, Jan 16, 2021 at 5:14 PM Dimitri Seretakis via Mercedes <
mercedes@okiebenz.com> wrote:


I’m not buying any more Chinese shit if I can help it.

Sent from my iPhone


On Jan 16, 2021, at 5:11 PM, Dan Penoff via Mercedes <

mercedes@okiebenz.com> wrote:

I bought a set for the second home. While I haven’t drilled any metal

with them yet that I can recall, they seem to work well.

-D


On Jan 16, 2021, at 5:08 PM, Jerry Herrman via Mercedes <

mercedes@okiebenz.com> wrote:

I bought the 29 piece Harbor Freight Titanium drill bit set for about

$11.

Wondering what I can expect from these drill bits, with particular

reference

to their performance in cutting metal.

Jerry

82 240D

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


--
--FT


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Drill Bit Set

[Dimitri Seretakis via Mercedes]

Nope.

Sent from my iPhone

> On Jan 16, 2021, at 5:42 PM, Andrew Strasfogel  wrote:
> 
> 
> Not even General Tso's Chicken?
> 
>> On Sat, Jan 16, 2021 at 5:14 PM Dimitri Seretakis via Mercedes 
>>  wrote:
>> I’m not buying any more Chinese shit if I can help it.
>> 
>> Sent from my iPhone
>> 
>> > On Jan 16, 2021, at 5:11 PM, Dan Penoff via Mercedes 
>> >  wrote:
>> > 
>> > I bought a set for the second home. While I haven’t drilled any metal 
>> > with them yet that I can recall, they seem to work well.
>> > 
>> > -D
>> > 
>> >> On Jan 16, 2021, at 5:08 PM, Jerry Herrman via Mercedes 
>> >>  wrote:
>> >> 
>> >> I bought the 29 piece Harbor Freight Titanium drill bit set for about $11.
>> >> Wondering what I can expect from these drill bits, with particular 
>> >> reference
>> >> to their performance in cutting metal.
>> >> 
>> >> Jerry
>> >> 
>> >> 82 240D
>> >> 
>> >> ___
>> >> http://www.okiebenz.com
>> >> 
>> >> To search list archives http://www.okiebenz.com/archive/
>> >> 
>> >> To Unsubscribe or change delivery options go to:
>> >> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> >> 
>> > 
>> > 
>> > ___
>> > http://www.okiebenz.com
>> > 
>> > To search list archives http://www.okiebenz.com/archive/
>> > 
>> > To Unsubscribe or change delivery options go to:
>> > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> > 
>> 
>> 
>> ___
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> 
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Drill Bit Set

[Andrew Strasfogel via Mercedes]

Not even General Tso's Chicken?

On Sat, Jan 16, 2021 at 5:14 PM Dimitri Seretakis via Mercedes <
mercedes@okiebenz.com> wrote:

> I’m not buying any more Chinese shit if I can help it.
>
> Sent from my iPhone
>
> > On Jan 16, 2021, at 5:11 PM, Dan Penoff via Mercedes <
> mercedes@okiebenz.com> wrote:
> >
> > I bought a set for the second home. While I haven’t drilled any metal
> with them yet that I can recall, they seem to work well.
> >
> > -D
> >
> >> On Jan 16, 2021, at 5:08 PM, Jerry Herrman via Mercedes <
> mercedes@okiebenz.com> wrote:
> >>
> >> I bought the 29 piece Harbor Freight Titanium drill bit set for about
> $11.
> >> Wondering what I can expect from these drill bits, with particular
> reference
> >> to their performance in cutting metal.
> >>
> >> Jerry
> >>
> >> 82 240D
> >>
> >> ___
> >> http://www.okiebenz.com
> >>
> >> To search list archives http://www.okiebenz.com/archive/
> >>
> >> To Unsubscribe or change delivery options go to:
> >> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> >>
> >
> >
> > ___
> > http://www.okiebenz.com
> >
> > To search list archives http://www.okiebenz.com/archive/
> >
> > To Unsubscribe or change delivery options go to:
> > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> >
>
>
> ___
> http://www.okiebenz.com
>
> To search list archives http://www.okiebenz.com/archive/
>
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Relisted, 1969 220D project

[Andrew Strasfogel via Mercedes]

*When you drove through puddles of water, it would splash onto the
windshield through the holes in the front fenders.*

Aah, such nostalgia.

On Sat, Jan 16, 2021 at 3:23 PM OK Don via Mercedes 
wrote:

> YES they are - my first MB, a 1970 220D was from MN (my Grandfather bought
> it new) - I sold it for parts when it started binding the doors when jacked
> up on one side. When you drove through puddles of water, it would splash
> onto the windshield through the holes in the front fenders.
>
> On Sat, Jan 16, 2021 at 2:07 PM Allan Streib via Mercedes <
> mercedes@okiebenz.com> wrote:
>
> > They are rust-prone though? Means not really something you want to drive
> > in the wintertime where road salt is used.
> >
> >
> >
>
> --
> OK Don
>
> "Whenever you find yourself on the side of the majority, it is time to
> pause and reflect." Mark Twain
>
> “Basic research is what I’m doing when I don’t know what I am doing.”
> Wernher
> Von Braun
> 2013 F150, 18 mpg
> 2017 Subaru Legacy, 30 mpg
> 1957 C182A, 12 mpg - but at 150 mph!
> ___
> http://www.okiebenz.com
>
> To search list archives http://www.okiebenz.com/archive/
>
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Drill Bit Set

[Allan Streib via Mercedes]

Don't know about those but would be interested to hear your experience.

I have found that some HF stuff is complete junk, but other stuff is
quite a good value.

I've been very satisfied with their "Pittsburgh" brand sockets,
wrenches, and screwdrivers.

Allan

Jerry Herrman via Mercedes  writes:

> I bought the 29 piece Harbor Freight Titanium drill bit set for about $11.
> Wondering what I can expect from these drill bits, with particular reference
> to their performance in cutting metal.
>
> Jerry
>
> 82 240D

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Drill Bit Set

[Dimitri Seretakis via Mercedes]

I’m not buying any more Chinese shit if I can help it.

Sent from my iPhone

> On Jan 16, 2021, at 5:11 PM, Dan Penoff via Mercedes  
> wrote:
> 
> I bought a set for the second home. While I haven’t drilled any metal with 
> them yet that I can recall, they seem to work well.
> 
> -D
> 
>> On Jan 16, 2021, at 5:08 PM, Jerry Herrman via Mercedes 
>>  wrote:
>> 
>> I bought the 29 piece Harbor Freight Titanium drill bit set for about $11.
>> Wondering what I can expect from these drill bits, with particular reference
>> to their performance in cutting metal.
>> 
>> Jerry
>> 
>> 82 240D
>> 
>> ___
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> 
> 
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Drill Bit Set

[Dan Penoff via Mercedes]

I bought a set for the second home. While I haven’t drilled any metal with them 
yet that I can recall, they seem to work well.

-D

> On Jan 16, 2021, at 5:08 PM, Jerry Herrman via Mercedes 
>  wrote:
> 
> I bought the 29 piece Harbor Freight Titanium drill bit set for about $11.
> Wondering what I can expect from these drill bits, with particular reference
> to their performance in cutting metal.
> 
> Jerry
> 
> 82 240D
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

[MBZ] Drill Bit Set

[Jerry Herrman via Mercedes]

I bought the 29 piece Harbor Freight Titanium drill bit set for about $11.
Wondering what I can expect from these drill bits, with particular reference
to their performance in cutting metal.

Jerry

82 240D

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] W124 Fuel Shutoff

[Dan Penoff via Mercedes]

Simple:

For a Mercedes part, Google “mercedes” and the part number, no spaces.

Google “bosch” and “1427133094” and you’ll get hits on the Bosch part.

-D


> On Jan 16, 2021, at 5:01 PM, Bob Rentfro via Mercedes  
> wrote:
> 
> I gave no idea what is wrong with my searching prowess. I’m an idiot. 
> 
> I can get it at the stealership for 25 bucks
> 
> Sent from my iPhone
> 
>> On Jan 16, 2021, at 2:55 PM, Dan Penoff via Mercedes  
>> wrote:
>> 
>> Yup.
>> 
>> AutohausAZ has them for around $25.
>> 
>> -D
>> 
>> 
>> 
>>> On Jan 16, 2021, at 4:20 PM, Kaleb Striplin via Mercedes 
>>>  wrote:
>>> 
>>> That is the Bosch part number, not the MB part number. 
>>> 
>>> Sent from my iPhone
>>> 
> On Jan 16, 2021, at 3:17 PM, Bob Rentfro via Mercedes 
>  wrote:
 
 
 
 
 
 
 Sent from my iPhone
 
> On Jan 16, 2021, at 2:10 PM, Dan Penoff via Mercedes 
>  wrote:
> 
> What’s the car’s VIN?
> 
> And “142” is not a good prefix for an MB part number that I know of.
> 
> -D
> 
>>> On Jan 16, 2021, at 4:07 PM, Bob Rentfro via Mercedes 
>>>  wrote:
>> 
>> Right off the top of what’s installed in the car. The zero might be a 
>> nine or an 8 it’s hard to tell because it’s underneath an electrical 
>> wire that’s hard to move.
>> 
>> Sent from my iPhone
>> 
 On Jan 16, 2021, at 2:01 PM, Dan Penoff via Mercedes 
  wrote:
>>> 
>>> Where did you get that? It’s not a good MB number.
>>> 
>>> -D
>>> 
 On Jan 16, 2021, at 3:58 PM, Bob Rentfro via Mercedes 
  wrote:
 
 1427133094 is the part number for the Fuel shut off valve that’s 
 currently in my car. What the actual fuck.
 
 Bob R
 
 Sent from my iPhone
 ___
 http://www.okiebenz.com
 
 To search list archives http://www.okiebenz.com/archive/
 
 To Unsubscribe or change delivery options go to:
 http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
 
>>> 
>>> 
>>> ___
>>> http://www.okiebenz.com
>>> 
>>> To search list archives http://www.okiebenz.com/archive/
>>> 
>>> To Unsubscribe or change delivery options go to:
>>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>>> 
>> 
>> ___
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> 
> 
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 
 ___
 http://www.okiebenz.com
 
 To search list archives http://www.okiebenz.com/archive/
 
 To Unsubscribe or change delivery options go to:
 http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
 
>>> 
>>> 
>>> ___
>>> http://www.okiebenz.com
>>> 
>>> To search list archives http://www.okiebenz.com/archive/
>>> 
>>> To Unsubscribe or change delivery options go to:
>>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>>> 
>> 
>> 
>> ___
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> 
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] W124 Fuel Shutoff

[Bob Rentfro via Mercedes]

I gave no idea what is wrong with my searching prowess. I’m an idiot. 

I can get it at the stealership for 25 bucks

Sent from my iPhone

> On Jan 16, 2021, at 2:55 PM, Dan Penoff via Mercedes  
> wrote:
> 
> Yup.
> 
> AutohausAZ has them for around $25.
> 
> -D
> 
> 
> 
>> On Jan 16, 2021, at 4:20 PM, Kaleb Striplin via Mercedes 
>>  wrote:
>> 
>> That is the Bosch part number, not the MB part number. 
>> 
>> Sent from my iPhone
>> 
 On Jan 16, 2021, at 3:17 PM, Bob Rentfro via Mercedes 
  wrote:
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> Sent from my iPhone
>>> 
 On Jan 16, 2021, at 2:10 PM, Dan Penoff via Mercedes 
  wrote:
 
 What’s the car’s VIN?
 
 And “142” is not a good prefix for an MB part number that I know of.
 
 -D
 
>> On Jan 16, 2021, at 4:07 PM, Bob Rentfro via Mercedes 
>>  wrote:
> 
> Right off the top of what’s installed in the car. The zero might be a 
> nine or an 8 it’s hard to tell because it’s underneath an electrical wire 
> that’s hard to move.
> 
> Sent from my iPhone
> 
>>> On Jan 16, 2021, at 2:01 PM, Dan Penoff via Mercedes 
>>>  wrote:
>> 
>> Where did you get that? It’s not a good MB number.
>> 
>> -D
>> 
>>> On Jan 16, 2021, at 3:58 PM, Bob Rentfro via Mercedes 
>>>  wrote:
>>> 
>>> 1427133094 is the part number for the Fuel shut off valve that’s 
>>> currently in my car. What the actual fuck.
>>> 
>>> Bob R
>>> 
>>> Sent from my iPhone
>>> ___
>>> http://www.okiebenz.com
>>> 
>>> To search list archives http://www.okiebenz.com/archive/
>>> 
>>> To Unsubscribe or change delivery options go to:
>>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>>> 
>> 
>> 
>> ___
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> 
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 
 
 
 ___
 http://www.okiebenz.com
 
 To search list archives http://www.okiebenz.com/archive/
 
 To Unsubscribe or change delivery options go to:
 http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
 
>>> ___
>>> http://www.okiebenz.com
>>> 
>>> To search list archives http://www.okiebenz.com/archive/
>>> 
>>> To Unsubscribe or change delivery options go to:
>>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>>> 
>> 
>> 
>> ___
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> 
> 
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] W124 Fuel Shutoff

[Dan Penoff via Mercedes]

Yup.

AutohausAZ has them for around $25.

-D



> On Jan 16, 2021, at 4:20 PM, Kaleb Striplin via Mercedes 
>  wrote:
> 
> That is the Bosch part number, not the MB part number. 
> 
> Sent from my iPhone
> 
>> On Jan 16, 2021, at 3:17 PM, Bob Rentfro via Mercedes 
>>  wrote:
>> 
>> 
>> 
>> 
>> 
>> 
>> Sent from my iPhone
>> 
>>> On Jan 16, 2021, at 2:10 PM, Dan Penoff via Mercedes 
>>>  wrote:
>>> 
>>> What’s the car’s VIN?
>>> 
>>> And “142” is not a good prefix for an MB part number that I know of.
>>> 
>>> -D
>>> 
> On Jan 16, 2021, at 4:07 PM, Bob Rentfro via Mercedes 
>  wrote:
 
 Right off the top of what’s installed in the car. The zero might be a nine 
 or an 8 it’s hard to tell because it’s underneath an electrical wire 
 that’s hard to move.
 
 Sent from my iPhone
 
>> On Jan 16, 2021, at 2:01 PM, Dan Penoff via Mercedes 
>>  wrote:
> 
> Where did you get that? It’s not a good MB number.
> 
> -D
> 
>> On Jan 16, 2021, at 3:58 PM, Bob Rentfro via Mercedes 
>>  wrote:
>> 
>> 1427133094 is the part number for the Fuel shut off valve that’s 
>> currently in my car. What the actual fuck.
>> 
>> Bob R
>> 
>> Sent from my iPhone
>> ___
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> 
> 
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 
 
 ___
 http://www.okiebenz.com
 
 To search list archives http://www.okiebenz.com/archive/
 
 To Unsubscribe or change delivery options go to:
 http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
 
>>> 
>>> 
>>> ___
>>> http://www.okiebenz.com
>>> 
>>> To search list archives http://www.okiebenz.com/archive/
>>> 
>>> To Unsubscribe or change delivery options go to:
>>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>>> 
>> ___
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> 
> 
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] W124 Fuel Shutoff

[Max Dillon via Mercedes]

Correct, Bosch part number.  Stick that number in a search engine.

Max Dillon
Charleston SC


Jan 16, 2021 4:21:04 PM Kaleb Striplin via Mercedes :

> That is the Bosch part number, not the MB part number.
> 
> Sent from my iPhone
> 
>> On Jan 16, 2021, at 3:17 PM, Bob Rentfro via Mercedes 
>>  wrote:
>> 
>> 
>> 
>> 
>> 
>> 
>> Sent from my iPhone
>> 
>>> On Jan 16, 2021, at 2:10 PM, Dan Penoff via Mercedes 
>>>  wrote:
>>> 
>>> What’s the car’s VIN?
>>> 
>>> And “142” is not a good prefix for an MB part number that I know of.
>>> 
>>> -D
>>> 
> On Jan 16, 2021, at 4:07 PM, Bob Rentfro via Mercedes 
>  wrote:
 
 Right off the top of what’s installed in the car. The zero might be a nine 
 or an 8 it’s hard to tell because it’s underneath an electrical wire 
 that’s hard to move.
 
 Sent from my iPhone
 
>> …
> 
> Where did you get that? It’s not a good MB number.
> 
> -D
> 
>> …
> 
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 
 
 ___
 http://www.okiebenz.com
 
 To search list archives http://www.okiebenz.com/archive/
 
 To Unsubscribe or change delivery options go to:
 http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
 
>>> 
>>> 
>>> ___
>>> http://www.okiebenz.com
>>> 
>>> To search list archives http://www.okiebenz.com/archive/
>>> 
>>> To Unsubscribe or change delivery options go to:
>>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>>> 
>> ___
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> 
> 
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] W124 Fuel Shutoff

[Bob Rentfro via Mercedes]

Sent from my iPhone

> On Jan 16, 2021, at 2:23 PM, Bob Rentfro  wrote:
> 
> 
> 
> 
> 
> Sent from my iPhone
> 
>> On Jan 16, 2021, at 2:10 PM, Dan Penoff via Mercedes  
>> wrote:
>> 
>> What’s the car’s VIN?
>> 
>> And “142” is not a good prefix for an MB part number that I know of.
>> 
>> -D
>> 
 On Jan 16, 2021, at 4:07 PM, Bob Rentfro via Mercedes 
  wrote:
>>> 
>>> Right off the top of what’s installed in the car. The zero might be a nine 
>>> or an 8 it’s hard to tell because it’s underneath an electrical wire that’s 
>>> hard to move.
>>> 
>>> Sent from my iPhone
>>> 
> On Jan 16, 2021, at 2:01 PM, Dan Penoff via Mercedes 
>  wrote:
 
 Where did you get that? It’s not a good MB number.
 
 -D
 
> On Jan 16, 2021, at 3:58 PM, Bob Rentfro via Mercedes 
>  wrote:
> 
> 1427133094 is the part number for the Fuel shut off valve that’s 
> currently in my car. What the actual fuck.
> 
> Bob R
> 
> Sent from my iPhone
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 
 
 
 ___
 http://www.okiebenz.com
 
 To search list archives http://www.okiebenz.com/archive/
 
 To Unsubscribe or change delivery options go to:
 http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
 
>>> 
>>> ___
>>> http://www.okiebenz.com
>>> 
>>> To search list archives http://www.okiebenz.com/archive/
>>> 
>>> To Unsubscribe or change delivery options go to:
>>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>>> 
>> 
>> 
>> ___
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> 

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] W124 Fuel Shutoff

[Bob Rentfro via Mercedes]

Sent from my iPhone

> On Jan 16, 2021, at 2:10 PM, Dan Penoff via Mercedes  
> wrote:
> 
> What’s the car’s VIN?
> 
> And “142” is not a good prefix for an MB part number that I know of.
> 
> -D
> 
>> On Jan 16, 2021, at 4:07 PM, Bob Rentfro via Mercedes 
>>  wrote:
>> 
>> Right off the top of what’s installed in the car. The zero might be a nine 
>> or an 8 it’s hard to tell because it’s underneath an electrical wire that’s 
>> hard to move.
>> 
>> Sent from my iPhone
>> 
 On Jan 16, 2021, at 2:01 PM, Dan Penoff via Mercedes 
  wrote:
>>> 
>>> Where did you get that? It’s not a good MB number.
>>> 
>>> -D
>>> 
 On Jan 16, 2021, at 3:58 PM, Bob Rentfro via Mercedes 
  wrote:
 
 1427133094 is the part number for the Fuel shut off valve that’s currently 
 in my car. What the actual fuck.
 
 Bob R
 
 Sent from my iPhone
 ___
 http://www.okiebenz.com
 
 To search list archives http://www.okiebenz.com/archive/
 
 To Unsubscribe or change delivery options go to:
 http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
 
>>> 
>>> 
>>> ___
>>> http://www.okiebenz.com
>>> 
>>> To search list archives http://www.okiebenz.com/archive/
>>> 
>>> To Unsubscribe or change delivery options go to:
>>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>>> 
>> 
>> ___
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> 
> 
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] W124 Fuel Shutoff

[Kaleb Striplin via Mercedes]

That is the Bosch part number, not the MB part number. 

Sent from my iPhone

> On Jan 16, 2021, at 3:17 PM, Bob Rentfro via Mercedes  
> wrote:
> 
> 
> 
> 
> 
> 
> Sent from my iPhone
> 
>> On Jan 16, 2021, at 2:10 PM, Dan Penoff via Mercedes  
>> wrote:
>> 
>> What’s the car’s VIN?
>> 
>> And “142” is not a good prefix for an MB part number that I know of.
>> 
>> -D
>> 
 On Jan 16, 2021, at 4:07 PM, Bob Rentfro via Mercedes 
  wrote:
>>> 
>>> Right off the top of what’s installed in the car. The zero might be a nine 
>>> or an 8 it’s hard to tell because it’s underneath an electrical wire that’s 
>>> hard to move.
>>> 
>>> Sent from my iPhone
>>> 
> On Jan 16, 2021, at 2:01 PM, Dan Penoff via Mercedes 
>  wrote:
 
 Where did you get that? It’s not a good MB number.
 
 -D
 
> On Jan 16, 2021, at 3:58 PM, Bob Rentfro via Mercedes 
>  wrote:
> 
> 1427133094 is the part number for the Fuel shut off valve that’s 
> currently in my car. What the actual fuck.
> 
> Bob R
> 
> Sent from my iPhone
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 
 
 
 ___
 http://www.okiebenz.com
 
 To search list archives http://www.okiebenz.com/archive/
 
 To Unsubscribe or change delivery options go to:
 http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
 
>>> 
>>> ___
>>> http://www.okiebenz.com
>>> 
>>> To search list archives http://www.okiebenz.com/archive/
>>> 
>>> To Unsubscribe or change delivery options go to:
>>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>>> 
>> 
>> 
>> ___
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] W124 Fuel Shutoff

[Dan Penoff via Mercedes]

What’s the car’s VIN?

And “142” is not a good prefix for an MB part number that I know of.

-D

> On Jan 16, 2021, at 4:07 PM, Bob Rentfro via Mercedes  
> wrote:
> 
> Right off the top of what’s installed in the car. The zero might be a nine or 
> an 8 it’s hard to tell because it’s underneath an electrical wire that’s hard 
> to move.
> 
> Sent from my iPhone
> 
>> On Jan 16, 2021, at 2:01 PM, Dan Penoff via Mercedes  
>> wrote:
>> 
>> Where did you get that? It’s not a good MB number.
>> 
>> -D
>> 
>>> On Jan 16, 2021, at 3:58 PM, Bob Rentfro via Mercedes 
>>>  wrote:
>>> 
>>> 1427133094 is the part number for the Fuel shut off valve that’s currently 
>>> in my car. What the actual fuck.
>>> 
>>> Bob R
>>> 
>>> Sent from my iPhone
>>> ___
>>> http://www.okiebenz.com
>>> 
>>> To search list archives http://www.okiebenz.com/archive/
>>> 
>>> To Unsubscribe or change delivery options go to:
>>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>>> 
>> 
>> 
>> ___
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> 
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] W124 Fuel Shutoff

[Bob Rentfro via Mercedes]

Right off the top of what’s installed in the car. The zero might be a nine or 
an 8 it’s hard to tell because it’s underneath an electrical wire that’s hard 
to move.

Sent from my iPhone

> On Jan 16, 2021, at 2:01 PM, Dan Penoff via Mercedes  
> wrote:
> 
> Where did you get that? It’s not a good MB number.
> 
> -D
> 
>> On Jan 16, 2021, at 3:58 PM, Bob Rentfro via Mercedes 
>>  wrote:
>> 
>> 1427133094 is the part number for the Fuel shut off valve that’s currently 
>> in my car. What the actual fuck.
>> 
>> Bob R
>> 
>> Sent from my iPhone
>> ___
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> 
> 
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] W124 Fuel Shutoff

[Dan Penoff via Mercedes]

Where did you get that? It’s not a good MB number.

-D

> On Jan 16, 2021, at 3:58 PM, Bob Rentfro via Mercedes  
> wrote:
> 
> 1427133094 is the part number for the Fuel shut off valve that’s currently in 
> my car. What the actual fuck.
> 
> Bob R
> 
> Sent from my iPhone
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

[MBZ] W124 Fuel Shutoff

[Bob Rentfro via Mercedes]

1427133094 is the part number for the Fuel shut off valve that’s currently in 
my car. What the actual fuck.

Bob R

Sent from my iPhone
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Relisted, 1969 220D project

[OK Don via Mercedes]

YES they are - my first MB, a 1970 220D was from MN (my Grandfather bought
it new) - I sold it for parts when it started binding the doors when jacked
up on one side. When you drove through puddles of water, it would splash
onto the windshield through the holes in the front fenders.

On Sat, Jan 16, 2021 at 2:07 PM Allan Streib via Mercedes <
mercedes@okiebenz.com> wrote:

> They are rust-prone though? Means not really something you want to drive
> in the wintertime where road salt is used.
>
>
>

-- 
OK Don

"Whenever you find yourself on the side of the majority, it is time to
pause and reflect." Mark Twain

“Basic research is what I’m doing when I don’t know what I am doing.”  Wernher
Von Braun
2013 F150, 18 mpg
2017 Subaru Legacy, 30 mpg
1957 C182A, 12 mpg - but at 150 mph!
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Relisted, 1969 220D project

[Allan Streib via Mercedes]

They are rust-prone though? Means not really something you want to drive
in the wintertime where road salt is used.

Allan

Bob Rentfro via Mercedes  writes:

> I’d get it and cover the seats (until I could source replacements) and drive 
> it whilst I sort it out. 
>
> Sent from my iPhone
>
>> On Jan 16, 2021, at 11:46 AM, Dan Penoff via Mercedes 
>>  wrote:
>> 
>> Not a lot. W114s don’t get a lot of love, although this one has some things 
>> going for it such as a manny tranny. By the time you invested the money to 
>> restore this car you would be well into upside down territory.
>> 
>> -D
>> 
>>> On Jan 16, 2021, at 1:43 PM, Allan Streib via Mercedes 
>>>  wrote:
>>> 
>>> Don't recall the ask last time. What would a nice example be worth?
>>> 
>>> https://peoria.craigslist.org/cto/d/peoria-1969-mercedes/7262612817.html
>>> 
>>> Allan

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Relisted, 1969 220D project

[Bob Rentfro via Mercedes]

It’s in my hometown, too. 

Sent from my iPhone

> On Jan 16, 2021, at 12:06 PM, OK Don via Mercedes  
> wrote:
> 
> Check the heater fan ---
> 
>> On Sat, Jan 16, 2021 at 1:03 PM Dimitri Seretakis via Mercedes <
>> mercedes@okiebenz.com> wrote:
>> 
>> It’s pretty nice actually. Good color too. Good w115 do fetch decent money
>> actually.
>> 
>> Sent from my iPhone
>> 
>>> On Jan 16, 2021, at 1:59 PM, Bob Rentfro via Mercedes <
>> mercedes@okiebenz.com> wrote:
>>> 
>>> I’d get it and cover the seats (until I could source replacements) and
>> drive it whilst I sort it out.
>>> 
>>> Sent from my iPhone
>>> 
 On Jan 16, 2021, at 11:46 AM, Dan Penoff via Mercedes <
>> mercedes@okiebenz.com> wrote:
 
 Not a lot. W114s don’t get a lot of love, although this one has some
>> things going for it such as a manny tranny. By the time you invested the
>> money to restore this car you would be well into upside down territory.
 
 -D
 
>> On Jan 16, 2021, at 1:43 PM, Allan Streib via Mercedes <
>> mercedes@okiebenz.com> wrote:
> 
> Don't recall the ask last time. What would a nice example be worth?
> 
> 
>> https://peoria.craigslist.org/cto/d/peoria-1969-mercedes/7262612817.html
> 
> Allan
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 
 
 
 ___
 http://www.okiebenz.com
 
 To search list archives http://www.okiebenz.com/archive/
 
 To Unsubscribe or change delivery options go to:
 http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
 
>>> 
>>> ___
>>> http://www.okiebenz.com
>>> 
>>> To search list archives http://www.okiebenz.com/archive/
>>> 
>>> To Unsubscribe or change delivery options go to:
>>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>>> 
>> 
>> 
>> ___
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> 
>> 
> 
> -- 
> OK Don
> 
> "Whenever you find yourself on the side of the majority, it is time to
> pause and reflect." Mark Twain
> 
> “Basic research is what I’m doing when I don’t know what I am doing.”  Wernher
> Von Braun
> 2013 F150, 18 mpg
> 2017 Subaru Legacy, 30 mpg
> 1957 C182A, 12 mpg - but at 150 mph!
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Relisted, 1969 220D project

[OK Don via Mercedes]

Check the heater fan ---

On Sat, Jan 16, 2021 at 1:03 PM Dimitri Seretakis via Mercedes <
mercedes@okiebenz.com> wrote:

> It’s pretty nice actually. Good color too. Good w115 do fetch decent money
> actually.
>
> Sent from my iPhone
>
> > On Jan 16, 2021, at 1:59 PM, Bob Rentfro via Mercedes <
> mercedes@okiebenz.com> wrote:
> >
> > I’d get it and cover the seats (until I could source replacements) and
> drive it whilst I sort it out.
> >
> > Sent from my iPhone
> >
> >> On Jan 16, 2021, at 11:46 AM, Dan Penoff via Mercedes <
> mercedes@okiebenz.com> wrote:
> >>
> >> Not a lot. W114s don’t get a lot of love, although this one has some
> things going for it such as a manny tranny. By the time you invested the
> money to restore this car you would be well into upside down territory.
> >>
> >> -D
> >>
>  On Jan 16, 2021, at 1:43 PM, Allan Streib via Mercedes <
> mercedes@okiebenz.com> wrote:
> >>>
> >>> Don't recall the ask last time. What would a nice example be worth?
> >>>
> >>>
> https://peoria.craigslist.org/cto/d/peoria-1969-mercedes/7262612817.html
> >>>
> >>> Allan
> >>>
> >>> ___
> >>> http://www.okiebenz.com
> >>>
> >>> To search list archives http://www.okiebenz.com/archive/
> >>>
> >>> To Unsubscribe or change delivery options go to:
> >>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> >>>
> >>
> >>
> >> ___
> >> http://www.okiebenz.com
> >>
> >> To search list archives http://www.okiebenz.com/archive/
> >>
> >> To Unsubscribe or change delivery options go to:
> >> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> >>
> >
> > ___
> > http://www.okiebenz.com
> >
> > To search list archives http://www.okiebenz.com/archive/
> >
> > To Unsubscribe or change delivery options go to:
> > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> >
>
>
> ___
> http://www.okiebenz.com
>
> To search list archives http://www.okiebenz.com/archive/
>
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>

-- 
OK Don

"Whenever you find yourself on the side of the majority, it is time to
pause and reflect." Mark Twain

“Basic research is what I’m doing when I don’t know what I am doing.”  Wernher
Von Braun
2013 F150, 18 mpg
2017 Subaru Legacy, 30 mpg
1957 C182A, 12 mpg - but at 150 mph!
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Relisted, 1969 220D project

[Dimitri Seretakis via Mercedes]

It’s pretty nice actually. Good color too. Good w115 do fetch decent money 
actually.

Sent from my iPhone

> On Jan 16, 2021, at 1:59 PM, Bob Rentfro via Mercedes  
> wrote:
> 
> I’d get it and cover the seats (until I could source replacements) and drive 
> it whilst I sort it out. 
> 
> Sent from my iPhone
> 
>> On Jan 16, 2021, at 11:46 AM, Dan Penoff via Mercedes 
>>  wrote:
>> 
>> Not a lot. W114s don’t get a lot of love, although this one has some things 
>> going for it such as a manny tranny. By the time you invested the money to 
>> restore this car you would be well into upside down territory.
>> 
>> -D
>> 
 On Jan 16, 2021, at 1:43 PM, Allan Streib via Mercedes 
  wrote:
>>> 
>>> Don't recall the ask last time. What would a nice example be worth?
>>> 
>>> https://peoria.craigslist.org/cto/d/peoria-1969-mercedes/7262612817.html
>>> 
>>> Allan
>>> 
>>> ___
>>> http://www.okiebenz.com
>>> 
>>> To search list archives http://www.okiebenz.com/archive/
>>> 
>>> To Unsubscribe or change delivery options go to:
>>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>>> 
>> 
>> 
>> ___
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> 
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Relisted, 1969 220D project

[Bob Rentfro via Mercedes]

I’d get it and cover the seats (until I could source replacements) and drive it 
whilst I sort it out. 

Sent from my iPhone

> On Jan 16, 2021, at 11:46 AM, Dan Penoff via Mercedes  
> wrote:
> 
> Not a lot. W114s don’t get a lot of love, although this one has some things 
> going for it such as a manny tranny. By the time you invested the money to 
> restore this car you would be well into upside down territory.
> 
> -D
> 
>> On Jan 16, 2021, at 1:43 PM, Allan Streib via Mercedes 
>>  wrote:
>> 
>> Don't recall the ask last time. What would a nice example be worth?
>> 
>> https://peoria.craigslist.org/cto/d/peoria-1969-mercedes/7262612817.html
>> 
>> Allan
>> 
>> ___
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> 
> 
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Relisted, 1969 220D project

[Dan Penoff via Mercedes]

Not a lot. W114s don’t get a lot of love, although this one has some things 
going for it such as a manny tranny. By the time you invested the money to 
restore this car you would be well into upside down territory.

-D

> On Jan 16, 2021, at 1:43 PM, Allan Streib via Mercedes 
>  wrote:
> 
> Don't recall the ask last time. What would a nice example be worth?
> 
> https://peoria.craigslist.org/cto/d/peoria-1969-mercedes/7262612817.html
> 
> Allan
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

[MBZ] Relisted, 1969 220D project

[Allan Streib via Mercedes]

Don't recall the ask last time. What would a nice example be worth?

https://peoria.craigslist.org/cto/d/peoria-1969-mercedes/7262612817.html

Allan

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] You are not going anywhere fast in it, but it goes

[Floyd Thursby via Mercedes]

Don't ask why.  Nobody knows why

--RF

On 1/16/21 1:06 PM, Andrew Strasfogel wrote:

Unique color scheme.  Why?

On Sat, Jan 16, 2021 at 12:18 PM Floyd Thursby via Mercedes 
mailto:mercedes@okiebenz.com>> wrote:



1984 Mercedes 240d. Listing says it’s a 300d. It’s not. But it
forced me
to pick a model. It’s lowered, runs and drives as it should. You
are not
going anywhere fast in it, but it goes. Interior and body are
clean and
solid. Has new stereo and is already wired for amp in the trunk.
Comes
with two boxes of factory parts.


1984 Mercedes-Benz Mercedes-Benz 300 D
$1,600

https://www.facebook.com/marketplace/item/200270025127841/?ref=search_code=undefined



-- 
--FT


___
http://www.okiebenz.com 

To search list archives http://www.okiebenz.com/archive/


To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



--
--FT

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Dan's 211 4M wagon: 04 e320 swaggin wagon amg package 3600obo - $3, 600

[Max Dillon via Mercedes]

Seller is an idiot.  Cold air intake cones, right behind the radiator.  Genius!

Max Dillon
Charleston SC


Jan 16, 2021 11:20:26 AM Floyd Thursby via Mercedes :

> worth a road trip
> 
> https://greensboro.craigslist.org/cto/d/greensboro-04-e320-swaggin-wagon-amg/7262667218.html
> 
> -- 
> --FT
> 
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] You are not going anywhere fast in it, but it goes

[Dwight Giles via Mercedes]

Two tone? Ugh

Dwight Giles Jr.
Wickford RI

On Sat, Jan 16, 2021, 1:07 PM Andrew Strasfogel via Mercedes <
mercedes@okiebenz.com> wrote:

> Unique color scheme.  Why?
>
> On Sat, Jan 16, 2021 at 12:18 PM Floyd Thursby via Mercedes <
> mercedes@okiebenz.com> wrote:
>
> >
> > 1984 Mercedes 240d. Listing says it’s a 300d. It’s not. But it forced me
> > to pick a model. It’s lowered, runs and drives as it should. You are not
> > going anywhere fast in it, but it goes. Interior and body are clean and
> > solid. Has new stereo and is already wired for amp in the trunk. Comes
> > with two boxes of factory parts.
> >
> >
> > 1984 Mercedes-Benz Mercedes-Benz 300 D
> > $1,600
> >
> >
> https://www.facebook.com/marketplace/item/200270025127841/?ref=search_code=undefined
> >
> > --
> > --FT
> >
> > ___
> > http://www.okiebenz.com
> >
> > To search list archives http://www.okiebenz.com/archive/
> >
> > To Unsubscribe or change delivery options go to:
> > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> >
> >
> ___
> http://www.okiebenz.com
>
> To search list archives http://www.okiebenz.com/archive/
>
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] But was recalled in 1985 to replace emblems as 450. So it is really a 450SL

[Andrew Strasfogel via Mercedes]

Someone ought to compile a list of reasons and circumstances that causes
owners to put their working Mercedes out to pasture well before their time
is up.

On Sat, Jan 16, 2021 at 12:23 PM Floyd Thursby via Mercedes <
mercedes@okiebenz.com> wrote:

> 1972 Mercedes-Benz Mercedes-Benz 300 SL Roadster 2D
> $1,000
>
>
>
>
> https://www.facebook.com/marketplace/item/179512643924823/?ref=search_code=undefined
>
> --
> --FT
>
> ___
> http://www.okiebenz.com
>
> To search list archives http://www.okiebenz.com/archive/
>
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] You are not going anywhere fast in it, but it goes

[Andrew Strasfogel via Mercedes]

Unique color scheme.  Why?

On Sat, Jan 16, 2021 at 12:18 PM Floyd Thursby via Mercedes <
mercedes@okiebenz.com> wrote:

>
> 1984 Mercedes 240d. Listing says it’s a 300d. It’s not. But it forced me
> to pick a model. It’s lowered, runs and drives as it should. You are not
> going anywhere fast in it, but it goes. Interior and body are clean and
> solid. Has new stereo and is already wired for amp in the trunk. Comes
> with two boxes of factory parts.
>
>
> 1984 Mercedes-Benz Mercedes-Benz 300 D
> $1,600
>
> https://www.facebook.com/marketplace/item/200270025127841/?ref=search_code=undefined
>
> --
> --FT
>
> ___
> http://www.okiebenz.com
>
> To search list archives http://www.okiebenz.com/archive/
>
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

[MBZ] But was recalled in 1985 to replace emblems as 450. So it is really a 450SL

[Floyd Thursby via Mercedes]

1972 Mercedes-Benz Mercedes-Benz 300 SL Roadster 2D
$1,000



https://www.facebook.com/marketplace/item/179512643924823/?ref=search_code=undefined

--
--FT

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

[MBZ] You are not going anywhere fast in it, but it goes

[Floyd Thursby via Mercedes]

1984 Mercedes 240d. Listing says it’s a 300d. It’s not. But it forced me 
to pick a model. It’s lowered, runs and drives as it should. You are not 
going anywhere fast in it, but it goes. Interior and body are clean and 
solid. Has new stereo and is already wired for amp in the trunk. Comes 
with two boxes of factory parts.



1984 Mercedes-Benz Mercedes-Benz 300 D
$1,600
https://www.facebook.com/marketplace/item/200270025127841/?ref=search_code=undefined

--
--FT

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

[MBZ] if cut off then on again it doesn’t move...No Cheap ppl....No million in one questions

[Floyd Thursby via Mercedes]

2003 Mercedes-Benz E-Class
$1,500

https://www.facebook.com/marketplace/item/159829768979954/?ref=search_code=undefined

--
--FT

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

[MBZ] Dan's 211 4M wagon: 04 e320 swaggin wagon amg package 3600obo - $3, 600

[Floyd Thursby via Mercedes]

worth a road trip

https://greensboro.craigslist.org/cto/d/greensboro-04-e320-swaggin-wagon-amg/7262667218.html

--
--FT


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

[MBZ] OT JOKE: Little Miss Curious

[archer75--- via Mercedes]

 
> A mother was driving a little girl to her friend's house for a play date.
> 
> "Mommy?" the little girl asked. "How old are you?"
> 
> "Honey, you are not supposed to ask a lady her age," the mother replied. 
> "It's not polite.."
> 
> "Okay", the little girl said. "How much do you weigh?"
> 
> "Now really!" the mother said. "Those are personal questions and are none of 
> your
> business."
> 
> Undaunted, the little girl asked, "Why did you and daddy get a divorce?"
> "That's enough questions, young lady. Honestly!"
> 
> The exasperated mother walked away as the two friends began to play.
> "My mom won't tell me anything about herself," the little girl said to her 
> friend.
> 
> "Well," said the friend, "all you need to do is look at her driver's license. 
> It's like a report card, it has everything on it."
> 
> Later that night the little girl said to her mother, "I know how old you are. 
> You're 32."
> The mother was surprised and asked, "How did you find that out?"
> 
> "I also know that you weigh 140 pounds."
> 
> The mother was past surprised. She was shocked.
> 
> "How in heaven's name did you find that out?"
> 
> "And," the little girl said triumphantly, "I know why you and daddy got a 
> divorce!"
> 
> "Really?" the mother asked. "Why?"
> 
> "Because you got an F in sex."

-- 
This email has been checked for viruses by AVG.
https://www.avg.com


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

[MBZ] OT JOKE: Little Miss Curious Asks Mom Too Many Questions.

[archer75--- via Mercedes]

 
> A mother was driving a little girl to her friend's house for a play date.
> 
> "Mommy?" the little girl asked. "How old are you?"
> 
> "Honey, you are not supposed to ask a lady her age," the mother replied. 
> "It's not polite.."
> 
> "Okay", the little girl said. "How much do you weigh?"
> 
> "Now really!" the mother said. "Those are personal questions and are none of 
> your
> business."
> 
> Undaunted, the little girl asked, "Why did you and daddy get a divorce?"
> "That's enough questions, young lady. Honestly!"
> 
> The exasperated mother walked away as the two friends began to play.
> "My mom won't tell me anything about herself," the little girl said to her 
> friend.
> 
> "Well," said the friend, "all you need to do is look at her driver's license. 
> It's like a report card, it has everything on it."
> 
> Later that night the little girl said to her mother, "I know how old you are. 
> You're 32."
> The mother was surprised and asked, "How did you find that out?"
> 
> "I also know that you weigh 140 pounds."
> 
> The mother was past surprised. She was shocked.
> 
> "How in heaven's name did you find that out?"
> 
> "And," the little girl said triumphantly, "I know why you and daddy got a 
> divorce!"
> 
> "Really?" the mother asked. "Why?"
> 
> "Because you got an F in sex."



-- 
This email has been checked for viruses by AVG.
https://www.avg.com


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com