Re: [mythtv-users] Harmony 880 Remote?

[Lee Koloszyc]

A JM wrote:
> I'm not seeing that coupon apply correctly??? Anyone else having luck?
>
It was dead around 10:00 this morning.  It was an 800 use coupon.

Lee
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

Re: [mythtv-users] ALSA and real AC3 passthrough

[Lee Koloszyc]

Petr Stehlik wrote:


But does it allow for AC3 passthrough at the same time? Do you have some
AC3 sound source? Have you tried say HD DVB-S or perhaps DVD replayed
via the internal Myth DVD player (I guess that one would use the AC3
passthrough but I use xine so I don't know).

  


If I am not misunderstanding you, yes dmix allows for anything to be 
sent through the spdif connection.  Myth TV uses mplayer/xine to play 
DVD's depending how you set it up. I am using xine for mine as I like 
having the menus.  It plays both DTS/DD and works well. Occasionly I run 
into a DVD where it switches from stereo to DTS/DD and it causes Xine to 
say the Audio Card is in use, so I am not sure if you can be playing an 
MP3 or something at the same time as running a AC3 soundtrack from a 
movie, I can try that this weekend.  It surely can play multiple 
MP3s/MythTV recording at the same time over SPDIF though.


Lee
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

Re: [mythtv-users] ALSA and real AC3 passthrough

[Lee Koloszyc]

Petr Stehlik wrote:

My question is whether it's possible to set up the .asoundrc in a way
that it handles both DVB-S AC3 real passthrough and also analog->digital
conversion plus 32kHz->48kHz resampling.


Petr

  
I am not sure about your motherboard but with the intel8x0 built into my 
motherboard I am able to do it.
In the .asoundrc I found on the web there is an Alsa section called dmix 
(digital mix) which will convert the analog sound to the proper format 
for sending out through the spdif.

For my card it is like this:

pcm.nforce { type dmix ipc_key 1234 slave { pcm "hw:0,1" period_time 0 
period_size 1024 buffer_size 4096 rate 44100 } }


This may help, it is for gentoo, but you should get the general idea:
http://gentoo-wiki.com/HOWTO_ALSA_sound_mixer_aka_dmix



Lee
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

Re: [mythtv-users] I'm thinking of switching to windows :(

[Lee Koloszyc]

SixArm wrote:
For my forth attempt I decided to go as clean as possible.  64Bit 
Gentoo.  I want to take advantage of the Athlon's Quiet & Cool and 
from what I was under the assumption this is related to the 64bit distro?


I was able to build all the device drivers except for the lirc stuff, 
but I'll sort that out after I can see some HD.



If anyone's got a similar setup or some feed back I'd really 
appreciate it.  My next step is to toss the HD3000 into the box of 
parts in the basement and work on a windows solution.  I really rather 
not do this.


I seem to only get static from the cards, and it's hard to tell which 
device is associated with each card.


Here's some troubleshooting info from my current Gentoo setup:

mythtv ~ # uname -a
Linux mythtv 2.6.14-gentoo-r2 #5 SMP Sat Nov 26 20:44:25 PST 2005 
x86_64 AMD Athlon(tm) 64 Processor 3200+ AuthenticAMD GNU/Linux



ivtv0: Failed to load module tveeprom
ivtv0: Failed to load module tuner
ivtv0: Failed to load module saa7115
ivtv0: Failed to load module saa7127
ivtv0: Failed to load module msp3400
ivtv0: Failed to load module tda9887

Any feedback would be appreciated.

Cheers,

-sixarm


I had am running similar hardware (same MB and a 3000+ on 64 bit gentoo 
linux) and had this similar problem.   If I recall correctly it is some 
kind of conflict between the ivtv modules and the kernel ones.  I think 
I just moved/symlinked both places to the same directory.  I can't get 
into my box now, so I am unable to check.   Do a find for those files 
and you will probably find 2 copies.



Lee
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

[mythtv-users] Dvico FUSIONHDTV5 USB

[Lee Koloszyc]

http://www.tvtechnology.com/dlrf/one.php?id=1082

This new tuner just came out.  Looks interesting and can be had for $150 
or so.

Recieves both HDTV ATSC, QAM and NTSC signals.
Anyone know anything more about this?

Lee
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

Re: [mythtv-users] PVR-150 and IRBlaster

[Lee Koloszyc]

[EMAIL PROTECTED] wrote:


Thanks for the link.  I have followed it but I cant seem to get anything
out of Step 8.  Everything up to this step seems to have worked but when I
run this step I dont seem to be getting anything out of the IRBlaster.  I
tried the digital camera trick as well and I didnt see anything either. 
When I try to run another irsend command after the first one I get the

following error:
./irsend: could not connect to socket
./irsend: Connection refused


Anyone have any ideas.

Dave
 

Hmm I had this problem at some point, not sure how I fixed it. 
Make sure lircd is loaded at startup and make sure you are using the 
right device in the send script.

I know on Gentoo it ended up being /dev/lirc/0 and not /dev/lirc0.
Also check to make sure that lirc_i2c is not loading,
I would also check the comments on that same page (and all other posts 
for the irblaster) and see if someone else asked the same question.  
Mark is very good at answering questions people have on his blog and 
there may be some insight there.


Lee
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

Re: [mythtv-users] question about PVR-150 and PVR-150 MCE in same backend

[Lee Koloszyc]

[EMAIL PROTECTED] wrote:



Different take: Can two retail 150s with IR Blasters be used within Myth (two
cable boxes)?  Just checking, but I doubt I want to pay for another cable box
since much of what we watch is on analog anyway.  I'm pretty sure I saw that
this was NOT possible in Windows, and saw some stuff in the archives LIRC can
do that now.

 



I'm fairly certain myth doesn't care which card the ir blaster is on as 
long as the channel change script set  in myth options points to the 
proper lirc device.  So yes it could be done and should be pretty easy 
to setup.


Lee
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

Re: [mythtv-users] PVR 150 Remote

[Lee Koloszyc]

Daniel Agar wrote:


I'm using Fedora core 4 with atrpms and have everything up and working
with my pvr 150 but occasionally the remote stops responding and after a
reboot only the /dev/lircd device is created but not the required
/dev/lirc and /dev/lirc0. I've tried recreating these device files
manually and checking udev settings but everything seems to be fine. Some
googling revealed problems with the IR locking up on this card but I
haven't found any firm solution. So I was wondering if a lot of other PVR
150 users are experiencing this issue and what, if any solutions have been
found.

Thanks
 


http://www.blushingpenguin.com/mark/blog/?m=200510
this fixed it for me on Gentoo.  Seems to be succesful for a lot of people.

Lee
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

Re: [mythtv-users] PVR-150 and IRBlaster

[Lee Koloszyc]

[EMAIL PROTECTED] wrote:


Has anyone been successful in getting the onboard IRBlaster of a PVR150 to
work with directtv using lirc or some other program?  Any help would be
appreciated I am pulling my hair out over this one.

 


I used this page here to get it up and working:
http://www.blushingpenguin.com/mark/blog/?m=200510
Check a few posts back to as there is more information on how to find 
the code for your DirectTV box.



Lee
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

Re: [mythtv-users] Black frame border around picture

[Lee Koloszyc]

Dan Wilga wrote:


At 1:30 PM -0500 11/7/05, Lee Koloszyc wrote:

This is still an open bug, I think the last driver it worked in was 
8.14.13.

It is not fixed as of 8.18.8
http://ati.cchtml.com/show_bug.cgi?id=216
You can vote for it there.
Hoepfully it is fixed next go round.



Considering this site is the "unofficial Bugzilla for the ATi Linux 
driver", does ATI even read it? If past performance is any indication, 
I doubt it.


From what I have read on the Rage3d forums they actually look at it now 
and the people there seem to believe that ATI has started to "listen".   
I guess time will tell though:)  It is a shame because I really like ATI 
cards, I just wish the Linux support was better.


Lee
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

Re: [mythtv-users] Black frame border around picture

[Lee Koloszyc]

Dan Wilga wrote:



Well, I'm glad to see I'm not the only one with this problem. These 
adjustments seem to have completely stopped working in the ATI 
proprietary driver released mid-October.


There is a new version now on the web site which I haven't tried yet. 
The README doesn't mention this problem, but perhaps it has been fixed 
anyway. I'll try it tonight.





This is still an open bug, I think the last driver it worked in was 8.14.13.
It is not fixed as of 8.18.8
http://ati.cchtml.com/show_bug.cgi?id=216
You can vote for it there.
Hoepfully it is fixed next go round.

Lee

___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

Re: [mythtv-users] NVidia TV-Out, how high can I set my expectations

[Lee Koloszyc]

Chad Johnson wrote:


The TV-Out from the Chaintech seems to have what I can only call
interference in the picture.  Basically I can see what I'll call
interference lines being drawn in a pattern over the picture.

 


I had a Mad Dog 5200 and had the same problem, I returned it.
The Nvidia I have at work has the same problems out of the Monitor Out, 
but not the DVI.
I ended up buying an ATI for my myth box, crappy drivers, no XvMC,  and 
a bear to get working, but the S-Video out is beautiful.


Lee
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

Re: [mythtv-users] (slightly OT) improving wireless connections

[Lee Koloszyc]

Nelson Tang wrote:



So, my question is, is there a good way to improve my wireless signal?
Any placement tips, antenna orientation, etc.?  Any references online
I can read?  If it matters, the two stations are a Linksys WRT54G with
a Sveasoft firmware (don't remember which version offhand) on the
FE/BE and a Netgear WGT624v2.

Thanks for any suggestions,
--nelson


Does the Sveasoft firmware allow you to increase the signal strength?  I 
know the firmware I have lets you up it and it seems to make a 
difference in my townhouse.  I think they are set at 50% from the 
factory.  Last time I went to the computer store I also saw high-gain 
antennas for the linksys routers, not sure if they work though.  You can 
find a link on the main page of the linksys site.



Lee
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

Re: [mythtv-users] TV out video card

[Lee Koloszyc]

David Wallace wrote:


Hi,

I just went shopping for a GeFroce fx 4000 card. The only one I found
was pci based. But, for $18.00 more the had a fx 5200 agp with 256 meg
of ram with TV and DVI out. 


Will this work as good/easy as the 4000 card? I haven't opened the box
yet, just in case the list says it won't work!

David

 


It should be fine and as easy to use as the 4000.

Lee

___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

Re: [mythtv-users] mysql update on remote frontend broke MythTV

[Lee Koloszyc]

Mark Knecht wrote:



[EMAIL PROTECTED] ~ $ mythfrontend
QSqlDatabase: QMYSQL3 driver not loaded

Thanks,
Mark
___

 


I had that message once, I re-emerged qt and it fixed it.

Lee
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

Re: [mythtv-users] Upgrade to MySql 5.0

[Lee Koloszyc]

Adrian Kladnig wrote:


Is anyone running MythTV with MySQL 5.0?

Are there any  config changes that  I will need to make to get it to  
work properly?


Is there a way that I can  run  MySQL 5.0 in  parallel  with  MySQL 
3.23.58 (just to hedge my bets!)


Thanks,

Adrian.


I had problems with mythfilldatabase and MYSQL 5.0, I wouldn't upgrade 
just yet.
I read somewhere that repeat is now a MYSQL keyword and it breaks the 
mythfilldatabase SQL.



Lee
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

[mythtv-users] [Fwd: PVR-150 - Random Noise/Blockiness top 1/6 of screen]

[Lee Koloszyc]

Occasionaly while recording or watching TV the channel will have a band 
of white/black transparent blocks at the top of the screen, probably 
about 1/6 of the whole height (about 4-6 in. on a 36in TV).  Switching 
to a new channel and back will cause it to go away.
I tried searching for the answer but must not have been searching on the 
right terms.
I am running the PVR-150 with IVTV 4.0 drivers.  I have run with other 
versions of IVTV with the same problem. 
Currently I am using S-Video in, but it did the same thing with Cable in 
on both my Pentium 3 and the current Athlon 64 machine. 


Has anyone had this problem have a solution for it?

Thanks,
Lee


___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

Re: [mythtv-users] Backend loses the database

[Lee Koloszyc]

Mickey Chandler wrote:


At 04:54 AM 10/23/2005, Nick Rosier wrote:
>What version of MySQL are you running?

I'm running 5.0.4-beta-standard

--
Mickey Chandler
Chief Operating Whizard
Whizardries, Inc.: 
Our new site: 

I didn't catch the beginning of this thread, but mythfilldatabase from 
0.18.1 doesn't seem to work with MySQL 5.0.  It has something to do with 
"repeat" being a keyword in the MySQL 5 I think.  I reverted back to 4 
and everything worked again. Not sure if this is your problem.


Lee
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

Re: [mythtv-users] OpenGL ATI Radeon MythMusic MythGallery Problem

[Lee Koloszyc]

Sammo wrote:


Which driver are you using? I am using the ATI proprietary driver

because I have a Radeon 9550.

I am also using the proprietary driver, version 8.18.6 and running 
Gentoo 2.6.13.

It is also 64 bit.


Also, I'm using Xfree86 on Debian and would rather not change to xorg
at this stage. I've attached my XF86Config-4 file.
 

Ahh I have never used Xfree86 as I am relatively new to Linux, but I 
don't see anything wrong with your config.  You can try not using 
setting this to no  Option "UseInternalAGPGART"   "yes" to see if it 
get's any better.  All the settings are similar to mine except I use Xorg.


Lee
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

Re: [mythtv-users] OpenGL ATI Radeon MythMusic MythGallery Problem

[Lee Koloszyc]

IIRC, the ATI fglrx drivers don't let you use XV and OpenGL overlays
during the same X session.  So it will depend on the

   Option "VideoOverlay"   "on"
   Option "OpenGLOverlay"  "off"

options in your xorg.conf file, which are mutually exclusive.  So you
can have 2D acceleration or 3D acceleration, but not both.  See:

http://www.thinkwiki.org/wiki/Fglrx

I'm not so sure on any of this now, primarily because ATI provided
rotten support (both in terms of the drivers and when I'd try to
contact them directly), so I don't use the ATI card in my linux box
any longer.

HTH,
Tim

 

I think this is incorrect though I am not sure.  The OpenGL Overlay  is 
not 3d acceleration, but the ability to accelerate 2d video by placing 
it as an openGL texture.  I have both OpenGL and XV working on my 
machine and get nearly 3000 frames in GLXGears with my Radeon 9200.  It 
does play all the visuilizations without any problems on my machine. If 
he could post his Xorg.0.log and Xorg.conf it may be eaiser to determine 
the problem.  I wonder if he has opengl set to ATI?  In gentoo you can 
run opengl-update ati or eselect opengl set ati, not sure about other 
distros.



Lee


___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

Re: [mythtv-users] WinTV-PVR-350 hardware decoder only works for TV out?

[Lee Koloszyc]

This is a planned setup. Yes I only intend to display
video on a monitor and not a TV. 


To make use of the hardware decoding of a Nvidia card,
I guess I need to set MythTV up to use XvMC. Do you
have any pointer into how to do that? I'm new to this,
any help is greatly appreciated. Thanks.

Andy

 


I am pretty sure it is as simple as checking a box in the setup screen.
It is on the same setup page as for Using the PVR350 acceleration at the 
bottom.

At least that is what I recall from the short time I had an Nvidia card.

Lee
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

Re: [mythtv-users] ivtv 4.x compatible with HD-3000 DVB?

[Lee Koloszyc]

ToadMazter wrote:

Hmmm actually I just saw some output after exiting mythtvsetup 
that probably is the problem.
 
Couldn't open /dev/video0 to probe its inputs.

Couldn't open /dev/video1 to probe its inputs.
 
I assumed this is a another permissions issue so I tried running 
mythtvsetup as root.  Sure enough, I could setup the card as 
expected.  What is the command or file I need to edit to give 
permission to the mythtv user to use the videoX devices?  The official 
docs reference instructions for Mandrake, but I am on FC4.


Thanks!



On my system the /dev/video devices belong to the video group as does my 
mythtv user, allowing the user to acces the devices.
I would assume this is the proper way to do it, though I am new to this 
whole thing.


Lee



___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

Re: [mythtv-users] Best Soundcard?

[Lee Koloszyc]

Your problem won't be caused by conduction between the motherboard and
the case. I'm not sure what else it could be though, bad earth? cheap
speakers?

Adam
 

It could also be a noisy power supply or some component plugged into it 
or even a motherboard with bad isolation.



Lee
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

Re: [mythtv-users] Thanks to developers, plus a few tips from someone who finally got it working

[Lee Koloszyc]

[EMAIL PROTECTED] wrote:



2) Don't mess with wireless!  

Suprisingly enough I just bought a random Dlink 802.11G Wireless USB 
device at Compusa and it has worked flawlessly.  Though for some reason 
using Samba to copy all my MP3's from my Windows machine took forever 
and a day, yet when downloading from the internet it flys. Guess I am lucky.


I agree with the remote backend, I am only using my old P3 machine and 
it is very very loud and it isnt easy to find a quiet replacement CPU 
Cooler for it anymore.


Lee
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

Re: [mythtv-users] EPIA SP8000E questions

[Lee Koloszyc]

Gordon Morehouse wrote:



Second, does MythTV support the CN400 MPEG-4 acceleration, and how 
well does it work on the SP8000E?


From what I have read the MPEG-4 acceleration wasn't supported in the 
Linux Drivers yet, though I could be wrong.




Third, would there be any problem playing back both music and video 
from a network filesystem?


There shouldn't be, I have wireless G and it plays audio and video over 
the network fine.


Fourth, is the PVR250 going to get too hot for a fanless case? I've 
heard the 350 runs hot. I should only need a single encoder though, 
since the EPIA board has MPEG2 playback acceleration and TV out.


I would go with PVR150 as it is cheaper and the same card.  Not sure how 
hot it gets.


Fifth, does the SP8000E have optical SPDIF support? I've seen some 
conflicting posts.


It has a coaxial SPDIF connector on the board (that is also is 
switchible to composite video out).
It also has a connector on the board for digital out, not sure if there 
is an opitical connector for that or not.
I would also go for at least 512MB of memory.  My machine (PIII, Gentoo) 
seems to use about 450MB on average.


I'm also looking into the Epia's as frontends and building a heftier box 
for backend recording/reencoding duties.
Now if I could just find a good cheap Mini-ITX case with built-in IR 
that plugs into the Epia board.


Lee


___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

Re: [mythtv-users] Source for drives

[Lee Koloszyc]

tigerdirect.com has the Maxtor DiamondMax 10 300GB 7200rpm 16MB buffer 
for $89.99 after rebate.

They have both the SATA and IDE drives.

As for rebates I have only had a problem with a few, but since I keep 
track of all of them and most have web statuses I have taken care of 
them.  I did miss out of $50 once because I threw away the packaging 
before I cut out the UPC.  Dumb Dumb Dumb!

Lee
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

Re: [mythtv-users] Source for drives

[Lee Koloszyc]

On 9/27/05, Mike Daugird <[EMAIL PROTECTED]> wrote:


It doesn't look like I am in need of a high performance drive, 10 Mbytes/sec 
looks like top end traffic.
are there any secret sources for large capacity drives?

   



Check Fatwallet.com. 
If you have RSS you can go to roosster.com and have all the deals 
delivered to your "Inbox". 
I think they have options for just Computer Deals, you will need to set 
up filters though as there is hundreds of deals that come every day.


Lee
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

Re: [mythtv-users] S-Video Out

[Lee Koloszyc]

DSanchez wrote:


I have a MythTV system running on Fedora core 4 and it works great.
However, when i connect it to my tv i get scrambled picture.
So my video card is an ATI 7000 with s-video out.
I have it connected to my TV and the audio works perfect
but the video signal is scrammbled.


Which ATI driver are you using?
Also by scrambled are you able to see the image but it scrolls?

If you are using the ATI binary make sure you have
Option "TVStandard" "NTSC-M"   #set to correct format depending on country.

I know my ATI card defaulted to PAL at boot and it was a matter of 
swapping a jumper to make it NTSC at boot.
Posting the Device and Screen secitons of your xorg.conf could also help 
more.


Lee
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

[mythtv-users] Choppy Video on Playback and LiveTV, not with mplayer

[Lee Koloszyc]

Hello all,

I am having a problem with mythtv 0.18.1 on Gentoo kernel 2.6.12-r10 on 
both livetv and playing pre-recorded videos.
The play back is supper choppy and pauses about every 2 seconds. 
Playing the same file directly through mplayer or gmplayer and it runs 
as smooth as butter.

The recording works fine though even while recompiling X in the background.
I am running on a somewhat slow system: P3 800, VT6x4 mother board, 512M 
ram, Radeon 9250 256mb, PVR150, SBLive.
I am using the ATI binary drivers 8.16.20. 
I also had the same problem with an Nvidia FX5200 card in the system, 
but had to return the card because of less then desirable svideo output.


Thanks for any help!!
Lee

The log for mythfrontend -v playback looks like this:

2005-09-22 12:29:13.817 New DB connection, total: 1
Total desktop width=800, height=600, numscreens=1
2005-09-22 12:29:13.833 Using screen 0, 800x600 at 0,0
2005-09-22 12:29:13.846 mythfrontend version: 0.18.1.20050510-1 
www.mythtv.org

2005-09-22 12:29:13.847 Enabled verbose msgs : important general playback
2005-09-22 12:29:14.724 max_width: 800 max_height: 600
2005-09-22 12:29:14.951 Switching to square mode (G.A.N.T.)
2005-09-22 12:29:15.431 New DB connection, total: 2
2005-09-22 12:29:15.659 Registering Internal as a media playback plugin.
2005-09-22 12:29:15.742 Registering MythDVD DVD Media Handler as a media 
handler
2005-09-22 12:29:15.745 Registering MythDVD VCD Media Handler as a media 
handler
XMLParse::LoadTheme(): Can't open: 
/usr/share/mythtv/themes/G.A.N.T./video-ui.xml

XMLParse::LoadTheme(): Using default theme file
2005-09-22 12:29:59.930 Connecting to backend server: 127.0.0.1:6543 
(try 1 of 5)

2005-09-22 12:29:59.940 Using protocol version 15
2005-09-22 12:30:02.794 Switching to square mode (G.A.N.T.)
2005-09-22 12:31:54.937 All Programs
...
2005-09-22 12:32:10.588 AVFD
2005-09-22 12:32:10.589 AVFD: Opening Stream #0: codec id 2
2005-09-22 12:32:10.592 detectInterlace(Detect Scan, Detect Scan, 29.97, 
480) ->Interlaced Scan
2005-09-22 12:32:10.593 Interlaced: Interlaced Scan  video_height: 480  
fps: 29.97

2005-09-22 12:32:10.593 AVFD: Looking for decoder for 2
2005-09-22 12:32:10.594 AVFD
2005-09-22 12:32:10.594 AVFD: Opening Stream #1: codec id 86016
2005-09-22 12:32:10.594 AVFD: Looking for decoder for 86016
2005-09-22 12:32:10.594 Estimated bitrate = 6384
2005-09-22 12:32:11.374 Position map filled from DB to: 14432
2005-09-22 12:32:11.384 SyncPositionMap prerecorded, from DB: 14433 entries
2005-09-22 12:32:11.391 SyncPositionMap, new totframes: 216480, new 
length: 7223, posMap size: 14433

2005-09-22 12:32:11.392 Position map found
2005-09-22 12:32:11.410 Opening audio device '/dev/dsp'.
2005-09-22 12:32:11.410 Opening OSS audio device '/dev/dsp'.
2005-09-22 12:32:11.445 Over/underscan. V: 0, H: 0, XOff: 0, YOff: 0
2005-09-22 12:32:11.469 Using XV port 67
2005-09-22 12:32:11.476 Image size. dispxoff 0, dispyoff: 0, dispwoff: 
800, disphoff: 600

2005-09-22 12:32:11.476 Image size. imgx 0, imgy: 0, imgw: 720, imgh: 480
2005-09-22 12:32:11.972 Changing from None to WatchingPreRecorded
2005-09-22 12:32:11.983 New DB connection, total: 3
2005-09-22 12:32:11.993 nVidiaVideoSync: Could not open device 
/dev/nvidia0, No such file or directory
2005-09-22 12:32:11.995 DRMVideoSync: VBlank ioctl did not work, 
unimplemented in this driver?

2005-09-22 12:32:12.019 Using realtime priority.
2005-09-22 12:32:13.111 OpenGLVideoSync: GLX extensions: 
GLX_EXT_visual_info GLX_EXT_visual_rating GLX_EXT_import_context 
GLX_ARB_get_proc_address GLX_ARB_multisample
2005-09-22 12:32:13.112 OpenGLVideoSync: GLX Video Sync extension not 
present.

2005-09-22 12:32:13.118 Using audio as timebase
2005-09-22 12:32:13.119 Video timing method: RTC
2005-09-22 12:32:13.119 Refresh rate: 16579, frame interval: 33366
2005-09-22 12:32:13.119 waiting for prebuffer...
2005-09-22 12:32:13.253 prebuffer wait timed out..
2005-09-22 12:32:13.253 waiting for prebuffer...
2005-09-22 12:32:15.607 prebuffering pause
2005-09-22 12:32:15.608 waiting for prebuffer...
2005-09-22 12:32:15.742 prebuffer wait timed out..
2005-09-22 12:32:15.743 waiting for prebuffer...
'video_output' mean = '35819.22', std. dev. = '21511.22', fps = '27.92'
2005-09-22 12:32:17.822 prebuffering pause
2005-09-22 12:32:17.823 waiting for prebuffer...
2005-09-22 12:32:17.956 prebuffer wait timed out..
2005-09-22 12:32:17.957 waiting for prebuffer...
2005-09-22 12:32:19.521 prebuffering pause
2005-09-22 12:32:19.522 waiting for prebuffer...
2005-09-22 12:32:19.656 prebuffer wait timed out..
2005-09-22 12:32:19.656 waiting for prebuffer...
'video_output' mean = '37228.37', std. dev. = '31373.70', fps = '26.86'
* repeat indefinantly

___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users