[newbie-it] hi
salve vorrei iscrivermi, mi mandate un link per farlo? grazie. spero ci sia una sorta di moderatore cosi' non tutti devono sorbirsi 'sta mail. -- = grande è la confusione sotto il cielo: la situazione è perfetta =
RE: [newbie] LAN connectivity
Not enough information. Your explanation is a little terse. Have you enabled routing? Have you set up Masq? What are the IP's involved and all pertinent data. What lines did you add for Masq? Did you read the Masq howto? Did you understand it heh... I'm being facetious... (hey it IS complex, but you only need the simple example to get you going... worry about firewall rules later...) What/where is your DNS? Etc., etc., etc. -JMS |-Original Message- |From: Joe Lore [mailto:[EMAIL PROTECTED]] |Sent: Sunday, June 18, 2000 11:38 AM |To: Newbie@Linux-Mandrake. Com |Subject: [newbie] LAN connectivity | | |HI, | |I am using Mandrake 7.1 and I am having trouble getting connectivity to the |net through my LAN. | |I currently use a Win 98 SE box with internet sharing to provide net to the |entire LAN, however, when I provide the IP for that box as the default |gateway it just simply does not work. | |Has anyone successfully done this, if so what should I be using where for |settings, if not can anyone give me some tips on where to begin. | | |Thanks | |Joe |
RE: [newbie] TNT2 on X4.0..
I have not tried these programs, but I have used the GLMesa demos. The TNT2 rocks with XFREE4.0. Then ants in Moebius RUN around the moebius strip. They used to walk when I had a Voodoo2. All the GL screensavers and demo programs work fine. I merely performed a clean expert install, electing to use 4.0. -JMS |-Original Message- |From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of |Chris Hall |Sent: Sunday, June 18, 2000 3:33 AM |To: [EMAIL PROTECTED] |Subject: [newbie] TNT2 on X4.0.. | | |Does anyone have a tnt2 set up on X4.0 with opengl working correctly. |All of my mesa demos work just fine but Soldier of Fortune and Quake 3 |are terribly slow. The mouse cursor hardly moves across the screen. |I can set the gl driver with command like "./sof +set gl_drver |gldriver" |but it does no good. I have tried the new nvidia drivers using Avartar's |NHF on Linuxnewbies.org but then I get dumped to a command prompt when I |try to run and opengl stuff. Any suggestions? ;-) |
[newbie] The screen comes in black every minute [LM7.0-2].
Hello forum! I need to know if I can setup my X server to solve this problem. This remebers a screen saver. Maybe the driver is not the last version. To return to the system I must press CTRL, or any key, and the graphic screen comes well again. Warning : My driver is a MACH64. Do you know if its possible to configure startx (easy) to solve it ? Thank you -- -
[newbie] NVida TNT2 setup question
I'm struggling to find a Doc(s) on what/how is needed to get the new Nvidia drivers going for my TNT2. I did an expert Mandrake 7.1 install and picked Yes to have Xfree86 4.0 installed. Do I just DL the new drivers from Nvidia and follow their install instructions? Do I need a kernel upgrade first? Scott
[newbie] Cable modem
Is there a site with a good how to so I can set up Mandrake 7.0 to connect on the net with a cable modem -- Windoze is a virus with a user interface. This message was created with Linux
Re: [newbie] PCI modem
Take it back and get an ISA or external modem Linux does NOT like PCI modems. On Sun, 18 Jun 2000, also sprach: Hi folks... Does anyone know how to make a Motorola PCI modem work ? I know that linux does not handle PCI very well yet, but is there a way to make it work ? Thanks for the help. Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com -- Windoze is a virus with a user interface. This message was created with Linux
Re: [newbie] ZIP drive
Hi Chris and Mike: Yes, the zip disk was in the drive. Thanks for the info Chris, I'll try it when I get my other software working with Linux. edison From: "Mike Tracy Holt" [EMAIL PROTECTED] Reply-To: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: Re: [newbie] ZIP drive Date: Sat, 17 Jun 2000 23:01:59 -0700 Don't know if this has been answered yet, but do you have a disk in the drive? Mike Edison Gica wrote: Hi: i'm trying to install my 100MB Zip drive (external connected to printer port). i tried following the manual but when I click on the icon on the desktop an error message comes up 'invalid block device'. is there a kernel that i have to install first from the LM 7 cd? thanks all. Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com Hi Gica, Mandrake found my zip drive alright. When you first installed it with your installation disk does it can for scsi devices? If not, you will probably have to manually loan the module and edit fstab. Here is what I done to get my external drive working. Mkdir /mnt/zip insmod parport insmod ppa mount -t msdos /dev/sdX4 /mnt/zip You shouldn't have to load parport.o. Since we aren't using pre 5.2. Add the folling line to /etc/fstab /dev/sda4 /mnt/zip vfatuser,noauto 0 0 That entire line needs to be in the fstab file. I use /dev/sda4. That will probably work with you but no guarantees there. Then just type: mount /dev/sda4 /mnt/zip your drive should light up and initialize. BTW: If you don't have a zip disk in the drive when you tried to access it on your desktop, it will give you an error. :) Here is another way to get it working. My friend had success using this. mkdir /mnt/zip cd /mnt insmod #imm mount -t msdos /dev/sdb4 /mnt/zip Hope this helps! Chris Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
Re: [newbie] firewall???
i think it did why not repost incase? - Original Message - From: "Mark Weaver" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Sunday, June 18, 2000 10:30 PM Subject: [newbie] firewall??? | Earlier this weekend I had asked if anyone had any ideas about a firewall | problem I was having. I haven't heard anything back yet and I was | wondering if that message had gotten lost? | | -- | Mark | | I love my Linux Box! | | _ NetZero - Defenders of the Free World Click here for FREE Internet Access and Email http://www.netzero.net/download/index.html
Re: [newbie] trouble with Star Office
Have you tried to connect using Kmail to check if the mail server is down? Seve -Original Message- From: Mark Weaver [EMAIL PROTECTED] To: [EMAIL PROTECTED] [EMAIL PROTECTED] Date: Monday, June 19, 2000 4:29 AM Subject: [newbie] trouble with Star Office Hi all, I was wondering if anyone else had experienced this trouble with Star Office. When I attempt to "update" the email, (get S/O to contact my ISP's POP3 server) I get an error. A very generic error message that doesn't mean a lot to me, but says, "can't connect to Pop3 server." Can anyone shed any light on this? thanks, -- Mark I love my Linux Box!
RE: [newbie] The screen comes in black every minute [LM7.0-2].
Heh... In an Xterm type the following... xset s off Does this fix the problem? -JMS |-Original Message- |From: cavall_fort [mailto:[EMAIL PROTECTED]] |Sent: Monday, June 19, 2000 1:59 AM |To: [EMAIL PROTECTED] |Subject: [newbie] The screen comes in black every minute [LM7.0-2]. | | |Hello forum! | |I need to know if I can setup my X server to solve this problem. | |This remebers a screen saver. Maybe the driver is not the last version. |To return to the system I must press CTRL, or any key, and the graphic |screen comes well again. | |Warning : My driver is a MACH64. | |Do you know if its possible to configure startx (easy) to solve it ? | |Thank you | | -- | - |
Re: [newbie] switching lamguages - How?
Greg On the KDE bar near the lower righthand corner of the screen you should see a small button indicating which lang. you are using. My is english so it the button is en. Click the the button and you can change your settings to any other lang. mod. that you installed. Charles - Original Message - From: "Greg Harbin" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Saturday, June 17, 2000 4:05 PM Subject: [newbie] switching lamguages - How? I am running a new Mandrake 7.1 fresh install. During the expert install I selected Japanese as a secound laguage. Then continued on and install X 4.0. Now I have everything set up but I don't know how to toggle between english an and Japanese? Maybe a very simple question, but I could find nothing on the web site to talk about it other than the install. Thanks for your help. Greg __ Do You Yahoo!? Send instant messages with Yahoo! Messenger. http://im.yahoo.com/
Re: [newbie] ReiserFS with Automatic install!
:~Hi Dr Caracciolo! The Reiser Filesystem handles improper system shutdowns :~far better than does the (current) standard Ext2 filesystem.The improper :~shutdowns, which of course can be caused by a myrid of things like power :~outages or inexperienced Linux users' response to a crashed program or ... And we have no experience with it yet, it is oficially still "beta", and we do not like surprises, so ext2 is still the default filesystem. cu Denis -- - Dr. Denis Havlikhttp://www.ap.univie.ac.at/users/havlik Mandrakesoft||| e-mail: [EMAIL PROTECTED] Quality Assurance (@ @)(private: [EMAIL PROTECTED]) ---oOO--(_)--OOo- visit our new discusion forum: http://linuxpole.com
RE: [newbie] rc.d directorys
Hi, If I am not wrong, the rc.d directory and its subfolders are used during initializing (startup) and terminating (shutdown) of the Linux system. The book "Running Linux" has a small section on this. Cheers, Viboon -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of KompuKit Sent: Sunday, June 18, 2000 2:04 AM To: Linux-Mandrake Subject: [newbie] rc.d directorys What are the " rc.d " dirs for? -- Registered Linux User:73821 ===KompuKit=== Kit Goins ICQ# 7110071 [EMAIL PROTECTED] Lowell, Mass. Web Designer http://kitdesigns.bizhosting.com WebServer:http://kompukit.dyndns.org (Server Runs between M-F 6pm-12am,S+S 12pm-12am EST) ===KompuKit===
Re: [newbie] Undelivered mail
Ah, fine - so I do not have to vorry about it :-)) :~I got at least that many and sent them all back as attachments to the :~postmaster that sent it. :~ :~I guess they figured out there problem. :~ :~I never received another one. :~ :~Bambi :~ -- - Dr. Denis Havlikhttp://www.ap.univie.ac.at/users/havlik Mandrakesoft||| e-mail: [EMAIL PROTECTED] Quality Assurance (@ @)(private: [EMAIL PROTECTED]) ---oOO--(_)--OOo- visit our new discusion forum: http://linuxpole.com
Re: [newbie] Off topic longest time mail reject I have ever had
:~ Never in five years have I had a mail lost this long..the US :~postal service is faster than E-mail? I did not want to send the whole :~reject to the list, but in the header was addresses of daemon in the :~UK...the MDK machine is in the UK? I thought France. Nope. our mail server is in the US AFAIK. cu Denis -- - Dr. Denis Havlikhttp://www.ap.univie.ac.at/users/havlik Mandrakesoft||| e-mail: [EMAIL PROTECTED] Quality Assurance (@ @)(private: [EMAIL PROTECTED]) ---oOO--(_)--OOo- visit our new discusion forum: http://linuxpole.com
[newbie] Win2k is killing my Mandrake install
Hello- Here's my problem. I have Windows 2000 installed on my first hard drive and Mandrake 7 on my second hard drive. The first time I boot into Windows after I installed Linux, every time afterwards I can no longer access Linux. It boots up to the "Checking File System" and it freezes. Do you know why this might be happening? I have used Linux for about three months, but don't feel quite comfortable enough yet to have it as my only OS. Thanks, Ben Send FREE Greetings for Father's Day--or any day! Click here: http://www.whowhere.lycos.com/redirects/fathers_day.rdct
[newbie] Change file permissions
How do I change a file from read-only to read-write? Victor
RE: [newbie] Newsgroup for mailing lists
Hi If you find a solution for this problem, mail me, because I'm having the same situation. Thanks Arnaldo - Original Message - From: [EMAIL PROTECTED] To: Mandrake Newbie List [EMAIL PROTECTED] Sent: Monday, June 19, 2000 1:35 PM Subject: [newbie] Newsgroup for mailing lists Hi, Is there a newsgroup for the mandrake mailing lists? I'm getting so much mail that I can't keep up. T'anks, L -- Laurent Duperval "Montreal winters are an intelligence test, U|Force - Java Center and we who are here have failed it." Phone: (514) 282-8484 ext. 228 -Doug Camilli mailto:[EMAIL PROTECTED] Penguin Power!
Re: [newbie] Mandrake 7.1 Install problem: Can't find package xfree- rpm
:~I am unable to complete the Linux Mandrake 7.1 installation. :~When I reach the X Configuration I am prompted that the RPM package "xfree- " can't :be found. :~I have tried both Automated and Customized installation with the same result. :~Installing all the XFree packages did not help. :~Installation of Linux Mandrake 7.0 had no problems. :~My configuration is: AMD 700MHz CPU, 128MB SD-RAM, 16GB HD, Diamond Viper II :(Savage2000) graphics card. :~Any help is appreciated! Have you checked the md5sum of your ISO-image? Tried installing on another computer? cu Denis -- - Dr. Denis Havlikhttp://www.ap.univie.ac.at/users/havlik Mandrakesoft||| e-mail: [EMAIL PROTECTED] Quality Assurance (@ @)(private: [EMAIL PROTECTED]) ---oOO--(_)--OOo- visit our new discusion forum: http://linuxpole.com
[newbie] Screen saver re-visited
I tried to solve the problem I have with users accessing their screen saver settings again. I reloaded any RPM that seemed related to the problem and that didn't work. I checked file permissions too, and nothing seemed out of sorts. Then it occured to me that I could just su root, and change the settings that way, that didn't work either! This is driving me nuts, anybody have any ideas why my users can't access the screen saver settings? They do have access to the other Desktop settings. TIA -- Darryl Gibson Linux Neophyte (tm)
Re: [newbie] GAIM
I use everybuddy works well with AIM, Yahoo, and MSN. It's supposed to work well with icq as well but I don't have an ICQ number...kinda cool all the messangers wrapped in one package...I use it daily You can find it on TuCows Jim - Original Message - From: "Fran Parker" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Sunday, June 18, 2000 11:43 PM Subject: Re: [newbie] GAIM I am using GAIM version 0.9.18-1 and I have it open right now and an talking with my sister who is online with AOL. Hopefully this is not something that will now affect this version as well, and just hasn't gotten to mine yet. That would be a real drag. Bambi Digital Wokan wrote: Must be AOL's end. I have tried the latest version of GAIM and receive the same error about no config. lilbambi wrote: need to get the latest version if you are getting an error with GAIM now, even though it used to work. Something changed on AOL's end I believe. the new one fixes the problem. Bambi - Original Message - From: "Hugh" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Sunday, June 18, 2000 7:20 AM Subject: [newbie] GAIM Is anyone else having trouble with GAIM? It started about a week ago. Wont allow me to log in the pass word is correct. Say's I dont have a config file when I try. Any ideas? Not a big problem I admit but I hate not having an answer :) Hugh -- Digital Wokan Tribal mage of the electronics age Guerilla Linux Warrior
[newbie] Error in ML 7.1 FTP install
I have seen this error quite a bit on the news groups, with no real answer. I am attempting to install Mandrake Linux 7.1 via FTP install. I am using the ftp.eecs.umich.edu mirror to install. After the install states it is checking to see which packages are available, I get this error "depslist.ordered mismatch against hdlist". Has anyone seen this, and been able to resolve? Thank you very much for your prompt attention, Duncan McQueen __ Do You Yahoo!? Send instant messages with Yahoo! Messenger. http://im.yahoo.com/
Re: [newbie] Mandrake 7.1 inst-iso howto
Ottavia Since the install ISO is 649MB you should not try to burn it on a 650MB blank. Pony and several others make 700MB CD-Rs but be sure you do not pick up an audio only CD-R. NERO trys to make it hard to record from an ISO. There is no info in the manual or on their web site. Here is what you need to do: 1) Find the folder to which you downloaded the ISOs, right click on each and choose rename; mandrake 71-ext.iso change to mandrake 71-ext.nrg mandrake 71-inst.iso change to mandrake 71-inst.nrg 2) Launch NERO 3) Close the New Compilation window so that you have only the main window open. 4) From the toolbar along the top of the window select CD Recorder/ Choose Recorder and be sure your CD-RW is picked as the recording device. 5) From the File menu select Burn image. In the pop-up window navigate to the folder with the .nrg file and click on one and click OK 6) A Foreign Image File box will open. Click OK. 7)A Foreign Image Setting box will open. Change it were necessary to show the following values: Data mode 1; Block Size 2048: and the Swapped option should be checked.Click OK. 8) A Write CD window will open. If you have not done much burning and are not familiar with your CD-RWs abilities check all 4 boxes, test speed, simulate, burn, and finalize. By doing this NERO will auto select the burn speed.Finally in the top right of the window click the Write button and the process of burning the CD will begin. When the 1st CD is finished follow steps 5-8 to create the 2nd. Hope I have not made it seem too complicated. If you have any problems or other questions you can reply to the list or, contact me direct if you choose. Charles - Original Message - From: "Marta Kein" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Monday, June 19, 2000 6:56 AM Subject: [newbie] Mandrake 7.1 inst-iso howto Hello everybody, I managed to download the iso image of Mandrake 7.1. I am not very practice with cd burning and iso images but I would like to learn. In the Mandrake site I found a few example on how to burn an iso with different cd burning software. I use Nero CD burning. Does anybody else use the same cd burner and could give me a hint on how to burn the iso images with this software? Thanks in advance for your help Ottavia Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
Re: [newbie] Linksys LNE 100tx problems w/ mdk7
:~ distros, If it says version 2.0 somewhere on the card in white :~lettering :~ then it requires the latest tulip driver which you may have to compile :~ yourself. Did have that working in that way but it is no longer in a :~box :~ right now. RRP And we absolutely need the output of lspcidrake! cu Denis -- - Dr. Denis Havlikhttp://www.ap.univie.ac.at/users/havlik Mandrakesoft||| e-mail: [EMAIL PROTECTED] Quality Assurance (@ @)(private: [EMAIL PROTECTED]) ---oOO--(_)--OOo- visit our new discusion forum: http://linuxpole.com
[newbie] un-subscribe
un-subscribe
Re: [newbie] New to list need a little help with sendmail
Have you set up a pop3 daemon? -David Talbot At 08:45 AM 6/13/00 -0700, you wrote: Hello everyone i am new to the list my name is Luc the problem i have is: i have installed mandrake 7.0 (love it) very easy to do anywho i made a account then i went on a win pc and setup the email account well with the account i can send email (and the user gets it) but if the receiver replies i dont recieve the reply. i checked with my isp they allow email servers so it aint them blocking me can someone help? thank you very much (my pc is a amd k63 450 256megs ram pci nic to cable modem (the net works) Luc __ Do You Yahoo!? Yahoo! Photos -- now, 100 FREE prints! http://photos.yahoo.com
Re: [newbie] Cad and Tablet
Depends on the vendor of the tablet... for example, Wacom tablets from the Artpad(I-2) all the way up to the Intuos are supported. -David Talbot At 01:59 PM 6/13/00 -0700, you wrote: Some time ago I was looking for drivers for my Tablet. I wanted to use Linux on my system at work. Well no one came up with the driver I needed. I just visited calcomp and they have a survey, asking if anyone would like to see linux drivers. Here is the address to fill out there survey. Thanks in advance to all who fill it out. Jeff http://www.gtcocalcomp.com/driversurveylinux.htm
[newbie] Bus error
Hey folks. I have a little problem, I don't know how to solve. I have my daughter and I as users om my linux-box, so that we can have our own desktop, mail-setup and so on. Mine works (mostly) OK, but when she tries to start Netscape, she gets an: Bus error! why? How can I change anything in the netscape-setup for her alone, that dos'nt influence mine? I have tried to delete all of her local settings (the .netscape dir) - but no difference. Thanks in advance Mogens Jæger
[newbie] Promise UDMA-66 problems solved?
Hi In short, we have some workarounds, but we need a lot of people to test this workarounds, berfore finaly announcing "Yes, we got it!". More details on http://linuxpole.com/ ;- Other topics: * Mandrake 7.1: 2 Steps forward .. 4 steps back ?:-o * Do you like this forum? * Software for my hardware, please? * Do people ever read the documentation? ... cu Denis -- - Dr. Denis Havlikhttp://www.ap.univie.ac.at/users/havlik Mandrakesoft||| e-mail: [EMAIL PROTECTED] Quality Assurance (@ @)(private: [EMAIL PROTECTED]) ---oOO--(_)--OOo- visit our new discusion forum: http://linuxpole.com
Re: [newbie] NVida TNT2 setup question
go to www.linuxnewbie.org. AvatarX wrote an excellent NHF on how to get the nivida drivers working in mandrake. Scott Tyson wrote: I'm struggling to find a Doc(s) on what/how is needed to get the new Nvidia drivers going for my TNT2. I did an expert Mandrake 7.1 install and picked Yes to have Xfree86 4.0 installed. Do I just DL the new drivers from Nvidia and follow their install instructions? Do I need a kernel upgrade first? Scott
[newbie] $6.50 for MDK 7.1 2-CD set (GPL version)
Hi everyone, As a convenience to this list, I will burn MDK 7.1 onto two CD's at a cost of $6.50 for my time, my CD-R media, and shipping costs. If interested, just send me an E-mail requesting my mailing address. I'm not trying to make a fortune or get rich. It seems like a waste to download the iso images and just burn the 2-CD set for myself. I hope this will save someone some time and expense, Matt Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
[newbie] log me out
Please log me out I don't want to be on your mailing list It's too dificult for me. Thanks
[newbie] A Few Questions
1) I have a 500 mhz processor but Linux shows it running at 475, should I worry? 2) I have one of those built in sound cards, with C-Media Electronics chips-ICM18738 which sndconfig found and set up but it seems that the window managers keep crashing the darn thing. The CD player works great but system sounds will work for about a dozen sounds and then silence(does not effect the cd player but does effect the mp3 player). The MP3 player works great as long as I have system sounds turned off. If I lose sound and log out and back into KDE sounds return until they crash again. Any ideas 3) I had to re-install Mandrake 7.0 once in the month I have been operating. I found out the hard way dont log in as root and leave it for several hours. A thunderstorm came through and momentary knocked the power off, just enough to reboot it. Now it rebooted fine and I worked on it for several hours that night, but in the morning I turned it on and while the boot seemed fine it could not run x. After trying everything I could think of I finally after two hours reloaded the system. More then likely X's configuration file was damaged and it could not load the right video driver. Even using the so-called rescue disk I made durring the first installation would not work. Now I was able to control the last part of the boot but I could not find a right combination of yes/no's that would get me into a non-graphical screen. Is there a way to do a safe mode boot?? 4) I have seen many people of the list knocking PCI modems, but many of us can't afford an external modem. I now have a PCI modem that works fine, it was the only external at Best Buy that had a Linux compatible label on it. Its an Actiontec 56k internal call waiting modem and come with instructions on setting it up for linux at the command line and also writing a new line to the /ect/rc.d/rc.local file so it will be auto configure on start up. No problems and it works fine , at least one company tries to support Linux. 5) Before I had to reinstall I had installed Acrobat Reader, but it had errors everytime I used it. Any thoughts before I try again? 6)Does the normal install have the c-compilers? Thanks for any help, Don Hensley
[newbie] another modem
Hi folks... Looking for some info about my modem, it turned up to be designed for windows... So, I am thinking about getting another one... Which modem would be the one that satifies my needs, do you guys have any sugestion... I plan to use both windows and linux on a dial-up conection, on a digital line... Thanks for the help given. Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
Re: [newbie] Error in ML 7.1 FTP install
THAT'S the error I've been getting too... but I downloaded all the files from an FTP site. I have linux installed, but it was a pain! Also... when your trying to use the partioning I was having problems getting it to work correctly. I had to reformat placing the swap file first, then the other partions after! - Original Message - From: "Duncan McQueen" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Monday, June 19, 2000 8:47 AM Subject: [newbie] Error in ML 7.1 FTP install I have seen this error quite a bit on the news groups, with no real answer. I am attempting to install Mandrake Linux 7.1 via FTP install. I am using the ftp.eecs.umich.edu mirror to install. After the install states it is checking to see which packages are available, I get this error "depslist.ordered mismatch against hdlist". Has anyone seen this, and been able to resolve? Thank you very much for your prompt attention, Duncan McQueen __ Do You Yahoo!? Send instant messages with Yahoo! Messenger. http://im.yahoo.com/
[newbie] Mounting CD on scd0
Hello, I'm using Linux Mandrake for a year now, and followed the new releases. Recently I downloaded Mandrake71-inst.iso. When I booted the cdrom the image was loaded, but then I got the following error message: "I could not mount a cd on /dev/scd0". I did not have this problem with Mandrake 70-2. My machine is a Pentium 400 with Adaptec 2940 U/W , one scsi cdrom, one scsi cdwriter, one scsi harddisk and one IDE harddisk. Is this a bug or is there another explanation? Thanks in before. Bart Simons
[newbie] help tar files installing
Whenever I try to install tar.gz files from a terminal... I get the following errorwhy? and how do I fix this? checking whether C compiler (gcc) works...no configure error: installation or configuration problem: C compiler cannot create executables I installed all the gcc files...I could find...from CD but I still get this. -- Registered Linux User:73821 ===KompuKit=== Kit Goins ICQ# 7110071 [EMAIL PROTECTED] Lowell, Mass. Web Designer http://kitdesigns.bizhosting.com WebServer:http://kompukit.dyndns.org (Server Runs between M-F 6pm-12am,S+S 12pm-12am EST) ===KompuKit===
[newbie] Screen saver Bug #752
Hello list, I found my screen saver problem listed on the MUO bug list, #752, listed under resolved. However, the associated messages don't explain the fix. Where do I find the fix? TIA -- Darryl Gibson Linux Neophyte (tm)
[newbie] Frame buffer
hi. i need help to install the framebuffer device, i already install the kernel that support it but i don´t know how configure it. Saludos. begin:vcard n:Martinez Ramirez;Rogelio Enrique tel;home:(01)(7)382-10-43 tel;work:(01)(7)318-38-11 Ext 7707 x-mozilla-html:TRUE org:Instituto de Investigaciones Electricas;Unidad de Resultados de Simulacion adr:;;Av. Reforma 113, Col. Palmira;Temixco;Morelos;62490;Mexico version:2.1 email;internet:[EMAIL PROTECTED] title:Investigador fn:Rogelio E. Martinez Ramirez end:vcard
Re: [newbie] Installing linux-ar-405.tar.gz
The ./INSTALL worked. Thank you Roman Dennis Myers wrote: flupke wrote: You uncompress the archive : tar zxf linux-ar-405.tar.gz then you go into the newly created directoy, su to root, and execute the installation script : ./INSTALL (or is it ./SETUP???) Then, the rest should be self prompting. HTH Flupke On Wed, 14 Jun 2000, Romanator wrote: Hi, I may have asked this before but I cannot for the life of me install linux-ar-405.tar.gz I would like to install Adobe. Has any one been successful? I must be missing a command. Can any one help? Thanks, Roman -- There's no place like ~ ! I've been following this thread and have installed the reader pretty much as expected. However, I installed to file: /usr/local/Acrobat4 and now can't find anything that needs it to read, so the question is.. will it integrate with netscape without me having to do anything more, or do I need to copy it into Netscape somehow?This Linux stuff is so much more fun than "windows". begin:vcard n:;Roman x-mozilla-html:FALSE adr:;; version:2.1 note:Penguin Powered Email x-mozilla-cpt:;18816 fn:Roman - Registered Linux User #179293 end:vcard
[newbie] Remote Printing Problem
I finally got 7.0 to boot from the second drive and got LILO where I wanted it, but now I have a different problem. I cannot print to a remote printer on an Intel Netport Express print server. I can ping it. I can access all of the settings from Netscape, but when I define the printer and try to run a test page, it tells me connection refused, cannot start daemon. I did an lpc status and it says that everything is enabled and there is a file in the spooler but no daemon is present. I have looked in the printing howto and in several other places (as well as this list archives) but can't seem to find anything. I am sure that I am missing something very simple. Does anyone have any ideas? Thanks, Wendell Gragg
Re: [newbie] Bus error
Dunno about Mandrake, because I have been afraid to install plugger. In SuSE 6.4 Plugger was causing this exact same thing. Uninstalling plugger worked for me. Mogens Jæger wrote: Hey folks. I have a little problem, I don't know how to solve. I have my daughter and I as users om my linux-box, so that we can have our own desktop, mail-setup and so on. Mine works (mostly) OK, but when she tries to start Netscape, she gets an: Bus error! why? How can I change anything in the netscape-setup for her alone, that dos'nt influence mine? I have tried to delete all of her local settings (the .netscape dir) - but no difference. Thanks in advance Mogens Jæger -- Michael H. Collins http://www.linuxlink.com Admiral of OpenSourcery Penguinista Navy All Things French.. Mandrake and XFCE Fun with the Austin Linux group http://www.austinlug.org Need a Real Texas Radio Fix?http://www.kut.org
Re: [newbie] libstdc++ missing?
I did thisand it wouldn't come up...had to go back to 7.0.1 Anthony Huereca wrote: Download the latest version: http://download.sourceforge.net/licq/licq-0.81-1.i386.rpm and then do "rpm -Uvh licq-0.81-1.i386.rpm" I want to install 0.81 licq...onto 7.0 can I do this? HOW Anthony Huereca wrote: You need to install libstdc++-devel too. I'm trying to install licq-0.81 on my newly installed 7.1 box. ./configure gets to the point of checking for vector.h, returns no, and tells me configure: error: You need to have the libstdc++ headers installed I go to rpmfind.net, pick up libstdc++-2.95.2-7mdk.i586.rpm. rpm -i libstdc++-2.95.2-7mdk.i586.rpm tells me package libstdc++-2.95.2-7mdk is already installed. Meaning it's there but licq can't find it. I've compiled several other things on this machine with no problems. Any hints? Thanks. - John -- Anthony Huereca http://m3000.1wh.com Computers are not intelligent. They only think they are. -- Registered Linux User:73821 ===KompuKit=== Kit Goins ICQ# 7110071 [EMAIL PROTECTED] Lowell, Mass. Web Designer http://kitdesigns.bizhosting.com WebServer:http://kompukit.dyndns.org (Server Runs between M-F 6pm-12am,S+S 12pm-12am EST) ===KompuKit=== -- Anthony Huereca http://m3000.1wh.com Computers are not intelligent. They only think they are. -- Registered Linux User:73821 ===KompuKit=== Kit Goins ICQ# 7110071 [EMAIL PROTECTED] Lowell, Mass. Web Designer http://kitdesigns.bizhosting.com WebServer:http://kompukit.dyndns.org (Server Runs between M-F 6pm-12am,S+S 12pm-12am EST) ===KompuKit===
[newbie] installation question
I'm having a problem installing Mandrake Linux on my PC. It's a 200MHz Pentinum. Whenever I run the install program from the Installation CD from my PC, I select that I want to install Linux on a Windows partition. Then the PC reboots. From the text message on the screen it looks like install program is detecting hardware (i.e. it finds my CDROM). It even displays a message like "second stage install". At this point it seems like it's querying the VGA card so it can display DrakX in graphics mode. Unfortunately, when it tries to do this, it displays a black screen with 2 vertical gray lines. It seems like DrakX has a problem with my VGA card, which is a Diamond Multimedia EDGE 3D 2000 series card with 2MB ram and the STG2000 chipset. According to the XFree documentation, this card is supporting by the SVGA driver. Moreover, when I run the Mandrake Install CD on my PC at work, I can get to the DrakX screen, so I know my CD is good. So, is there anyone out there who can help me? I have search the internet and Mandrake's site, but to no success. [EMAIL PROTECTED] __ Do You Yahoo!? Send instant messages with Yahoo! Messenger. http://im.yahoo.com/
Re: [newbie] trouble with Star Office
No, but I did check to see if the server was working and it was. -- Mark I love my Linux Box! On Mon, 19 Jun 2000, Sevatio Octavio wrote: :Have you tried to connect using Kmail to check if the mail server is down? : :Seve : :-Original Message- :From: Mark Weaver [EMAIL PROTECTED] :To: [EMAIL PROTECTED] [EMAIL PROTECTED] :Date: Monday, June 19, 2000 4:29 AM :Subject: [newbie] trouble with Star Office : : :Hi all, : :I was wondering if anyone else had experienced this trouble with Star :Office. When I attempt to "update" the email, (get S/O to contact my ISP's :POP3 server) I get an error. A very generic error message that doesn't :mean a lot to me, but says, "can't connect to Pop3 server." : :Can anyone shed any light on this? : :thanks, : :-- :Mark : :I love my Linux Box! : : :
Re: [newbie] another modem
On Mon, 19 Jun 2000, you wrote: Hi folks... Looking for some info about my modem, it turned up to be designed for windows... So, I am thinking about getting another one... Which modem would be the one that satifies my needs, do you guys have any sugestion... I plan to use both windows and linux on a dial-up conection, on a digital line... Thanks for the help given. A search of 'harware modem' at www.pricewatch.com will return several dozen. A Phoebe built around the Texas Instruments chipset is about $40. It's basically the same modem as the 3com/USR that costs twice as much. ~~ Tom Brinkman[EMAIL PROTECTED]
Re: [newbie] $6.50 for MDK 7.1 2-CD set (GPL version)
You can get the same thing at http://www.cheapbytes.com for $1.99 US. -- Mark I love my Linux Box! On Mon, 19 Jun 2000, M Thompson wrote: :Hi everyone, : :As a convenience to this list, I will burn MDK 7.1 onto two CD's at a cost :of $6.50 for my time, my CD-R media, and shipping costs. : :If interested, just send me an E-mail requesting my mailing address. : :I'm not trying to make a fortune or get rich. It seems like a waste to :download the iso images and just burn the 2-CD set for myself. : : :I hope this will save someone some time and expense, :Matt : : :Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com :
[newbie] un subscribe
please un-subscribe the newbie email
Re: [newbie] Bus error
Side note: I went to netscrappy site and downloaded and installed plugger works great on Mandrake 7.0 (Air). Bambi "Michael H. Collins" wrote: Dunno about Mandrake, because I have been afraid to install plugger. In SuSE 6.4 Plugger was causing this exact same thing. Uninstalling plugger worked for me. Mogens Jæger wrote: Hey folks. I have a little problem, I don't know how to solve. I have my daughter and I as users om my linux-box, so that we can have our own desktop, mail-setup and so on. Mine works (mostly) OK, but when she tries to start Netscape, she gets an: Bus error! why? How can I change anything in the netscape-setup for her alone, that dos'nt influence mine? I have tried to delete all of her local settings (the .netscape dir) - but no difference. Thanks in advance Mogens Jæger -- Michael H. Collins http://www.linuxlink.com Admiral of OpenSourcery Penguinista Navy All Things French.. Mandrake and XFCE Fun with the Austin Linux group http://www.austinlug.org Need a Real Texas Radio Fix?http://www.kut.org
Re: [newbie] Undelivered mail
I guess not :) I think whatever it was they fixed it. They got all their messages plus all the ones I sent back to them...that I had already gotten directly, BTW on the newbie and expert lists, other email addressed to me AND some other mail that hadn't been address to me but other people! I sent them back and told them that I thought they should have them in case they needed to get some of them to the original recipients. I don't even know and were not sending to these lists. This was very annoying...when you get WELL OVER 100 messages a day ...getting WELL OVER 200 didn't set well with mewhen it was for no good reason. Bambi Denis HAVLIK wrote: Ah, fine - so I do not have to vorry about it :-)) :~I got at least that many and sent them all back as attachments to the :~postmaster that sent it. :~ :~I guess they figured out there problem. :~ :~I never received another one. :~ :~Bambi :~ -- - Dr. Denis Havlikhttp://www.ap.univie.ac.at/users/havlik Mandrakesoft||| e-mail: [EMAIL PROTECTED] Quality Assurance (@ @)(private: [EMAIL PROTECTED]) ---oOO--(_)--OOo- visit our new discusion forum: http://linuxpole.com
Re: [newbie] NVida TNT2 setup question
On Mon, 19 Jun 2000, you wrote: Scott Tyson wrote: I'm struggling to find a Doc(s) on what/how is needed to get the new Nvidia drivers going for my TNT2. I did an expert Mandrake 7.1 install and picked Yes to have Xfree86 4.0 installed. Do I just DL the new drivers from Nvidia and follow their install instructions? Do I need a kernel upgrade first? Scott Scott, Go to http://www.linuxnewbie.org On the right hand side of the page you'll find a link to instructions for installing the TNT2 drivers. Roland
[newbie] help tar files installing
Whenever I try to install tar.gz files from a terminal... I get the following errorwhy? and how do I fix this? checking whether C compiler (gcc) works...no configure error: installation or configuration problem: C compiler cannot create executables I installed all the gcc files...I could find...from CD but I still get this. -- Registered Linux User:73821 ===KompuKit=== Kit Goins ICQ# 7110071 [EMAIL PROTECTED] Lowell, Mass. Web Designer http://kitdesigns.bizhosting.com WebServer:http://kompukit.dyndns.org (Server Runs between M-F 6pm-12am,S+S 12pm-12am EST) ===KompuKit===
Re: [Re: [Re: [newbie] More on my SCSI hd problems]]
Thought of this, and did look around Seagate's web site, but didn't see anything. If anyone knows of a util for this, please let me know. Thanks. Ty Paul [EMAIL PROTECTED] wrote: On 11 Jun 2000, Tymanthius Rune Speak wrote: I did a text install, and it simply bombed shortly after trying to detect the hd's. I jumped thru the consoles, and found that it's having scsi parity err's. What I don't understand is why. Tried prior to that successful install w/ the scsi hd plugged in. Didn't partition it, didn't format, nuthin'. Froze at formating. Any further ideas? If you know the brand of your SCSI disk, perhaps at the website of the manufacturer you can find a low-level disk utility to check the disk. SCSI parity errors sound like a nasty thing, perhaps the disk is not too healthy and needs a low level format. Paul -- Yesterday is Past; Tomorrow is the Future; Today is a Gift...That is why we call it The Present. )0([[EMAIL PROTECTED]])0( http://nlpagan.net - ICQ 147208 Registered Linux User 174403 Get free email and a permanent address at http://www.netaddress.com/?N=1
Re: [newbie] $6.50 for MDK 7.1 2-CD set (GPL version)
A quick look shows cheapbytes charges 6.99 for MDK 7.1 2 CD set, the $1.99 price is for MDK 7.0 single CD. Matt includes shipping in his price, cheapbytes charges $5.00. If I hadn't already downloaded and burned my own CD-R's I'd probably get a set from Matt as other online vendors look like they charge even more than cheapbytes. - Ralph - Original Message - From: "Mark Weaver" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Monday, June 19, 2000 5:12 PM Subject: Re: [newbie] $6.50 for MDK 7.1 2-CD set (GPL version) You can get the same thing at http://www.cheapbytes.com for $1.99 US. -- Mark I love my Linux Box! On Mon, 19 Jun 2000, M Thompson wrote: :Hi everyone, : :As a convenience to this list, I will burn MDK 7.1 onto two CD's at a cost :of $6.50 for my time, my CD-R media, and shipping costs. : :If interested, just send me an E-mail requesting my mailing address. :
Re: [newbie] NVida TNT2 setup question
Nope. Go to www.linuxnewbie.org. Avatar wrote a nice NHF on how to install the drivers under mandrake. - Original Message - From: Roland Hightower [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Monday, June 19, 2000 9:09 PM Subject: Re: [newbie] NVida TNT2 setup question On Mon, 19 Jun 2000, you wrote: Scott Tyson wrote: I'm struggling to find a Doc(s) on what/how is needed to get the new Nvidia drivers going for my TNT2. I did an expert Mandrake 7.1 install and picked Yes to have Xfree86 4.0 installed. Do I just DL the new drivers from Nvidia and follow their install instructions? Do I need a kernel upgrade first? Scott Scott, Go to http://www.linuxnewbie.org On the right hand side of the page you'll find a link to instructions for installing the TNT2 drivers. Roland
[newbie] ipmasqadm ipchains
Dear All, i have a ip 168.95.1.1,it didn't provide httpd ftpd services, if i want someone link to http://168.95.1.1 of ftp://168.95.1.1 , it will auto port fordward into my intranet PC 192.168.0.1, and my questions is : how to use ipmasqadm command line?it sould be matchup with ipchains rules? Please tech me step by step,thanks, regards, -- [1;31mAuthor¡J[maman66 [1;31m[[mleo.emedia.com.tw[1;31m][m.
Re: [newbie] NVida TNT2 setup question
Thanks to all who replied. I'll give the linuxnewbie site a whirl. FYI.. X works just fine but If I'm not mistakne to run Quake3 with high framerates the new Nvidia drivers are required. *** REPLY SEPARATOR *** On 6/19/2000 at 11:23 PM Chris Hall scribbled: Nope. Go to www.linuxnewbie.org. Avatar wrote a nice NHF on how to install the drivers under mandrake. - Original Message - From: Roland Hightower [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Monday, June 19, 2000 9:09 PM Subject: Re: [newbie] NVida TNT2 setup question On Mon, 19 Jun 2000, you wrote: Scott Tyson wrote: I'm struggling to find a Doc(s) on what/how is needed to get the new Nvidia drivers going for my TNT2. I did an expert Mandrake 7.1 install and picked Yes to have Xfree86 4.0 installed. Do I just DL the new drivers from Nvidia and follow their install instructions? Do I need a kernel upgrade first? Scott Scott, Go to http://www.linuxnewbie.org On the right hand side of the page you'll find a link to instructions for installing the TNT2 drivers. Roland
Re: [[newbie] ETHERNET CARD PROBLEM]
Good day friends, I did a modprobe 3c509 on, it went ok... irq10, i/o 0x300 etc and after that I configured my network setting using the DrakConf... set-up my host name, IP and all... it works but not for long and not permanently. when it worked, i can ping the server, itself and other PCs on the LAN but when I rebooted everything is gone again. I did modprobe again... now, it says i/o error... this got me confused... really confused. it's so easy to configure this thing in Win95/98/NT/2000... when it comes to Linux... i'm lost and confused. checked almost every book there is, but it seems the writer are more interested in successfully installed Linux with everything configured during installation then after. How do you configured a newly installed device in Linux i.e. Ethernet card, MPEG card, etc. Thanks! Joe - Original Message - From: Jaguar [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Monday, June 19, 2000 3:32 AM Subject: Re: [[newbie] ETHERNET CARD PROBLEM] I have the 3COM509B NIC, that functions perfectly in Linux and Windows. I suggest writing down the exact I/O, IRQ (using whatever method you like to retireve these #'s )from Windows and using those parameter's in Linux. If the card works in Windows, it will work in Linux (with the right I/O, IRQ). HTH Jaguar "SJN" [EMAIL PROTECTED] wrote: Dear Linuxers, I'm using Linux Mandrake 7.0. I've installed it so many timer over just to get used to installation process. But I still could not overcome two problems. I appreciate some assistance here. 1. Ethernet Card 3Com 509b (combo) ISA using BNC cable. PnP mode disabled. I couldn't get the card to work. Installation found it but after installation it is not functioning. Booting process shows Eth0 initialisation failed. Lothar doesn't help much. The card works fine under win98 and win2000. 2. Display/Graphics Card S3 Savage3D AGP with 8MB on board. I could not get it to it to the resolution I want i.e. 800x600 at 32bit color depth. The monitor screen will go blank and the LED indicator on monitor shows that no signal received from the card. DrakConf offers no help as well. The card works fine under win98 and win2000. Monitor is a 15" Likom L503BGD. Thank you very much in advance for the help. Best Regards Joe The Dogma chased the Stigma, and was hit by the Karma. Get your own FREE, personal Netscape WebMail account today at http://webmail.netscape.com.
Re: [newbie] GAIM
Found it at the GAIM homepage... http://www.marko.net/gaim/ It seems that if you didn't have config data stored with AOL, you got the no config error we were discussing. 0.9.19 is supposed to solve this. While I'll be happy to install from a tarball, I wonder how long it'll take MandrakeSoft to get an updated RPM out the door. (Hear that, MdkSoft? Your new users under 7.1 can't use GAIM until you give them an update.) Jim wrote: I use everybuddy works well with AIM, Yahoo, and MSN. It's supposed to work well with icq as well but I don't have an ICQ number...kinda cool all the messangers wrapped in one package...I use it daily You can find it on TuCows Jim - Original Message - From: "Fran Parker" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Sunday, June 18, 2000 11:43 PM Subject: Re: [newbie] GAIM I am using GAIM version 0.9.18-1 and I have it open right now and an talking with my sister who is online with AOL. Hopefully this is not something that will now affect this version as well, and just hasn't gotten to mine yet. That would be a real drag. Bambi Digital Wokan wrote: Must be AOL's end. I have tried the latest version of GAIM and receive the same error about no config. lilbambi wrote: need to get the latest version if you are getting an error with GAIM now, even though it used to work. Something changed on AOL's end I believe. the new one fixes the problem. Bambi - Original Message - From: "Hugh" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Sunday, June 18, 2000 7:20 AM Subject: [newbie] GAIM Is anyone else having trouble with GAIM? It started about a week ago. Wont allow me to log in the pass word is correct. Say's I dont have a config file when I try. Any ideas? Not a big problem I admit but I hate not having an answer :) Hugh -- Digital Wokan Tribal mage of the electronics age Guerilla Linux Warrior -- Digital Wokan Tribal mage of the electronics age Guerilla Linux Warrior
Re: [newbie] Web mail server.
I use Sendmail, It is a bit tricky to setup, But it works well.. mike... Brian wrote: Hey guys, I usually sit back and watch the proceedings here, but I am after a "SECURE" webmail server program to run under Linux, I have previously looked at NT mail servers and shuddered Any help appreciated... Brian
Re: [newbie] another modem
ZOOM 56K 0.90 mODEL nO:2919 is working fine with my linux-mandrake 7.1 But I did have trouble in configuring it. Good luck Bye Chandu - Original Message - From: Rodrigo P. [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Monday, June 19, 2000 2:48 PM Subject: [newbie] another modem Hi folks... Looking for some info about my modem, it turned up to be designed for windows... So, I am thinking about getting another one... Which modem would be the one that satifies my needs, do you guys have any sugestion... I plan to use both windows and linux on a dial-up conection, on a digital line... Thanks for the help given. Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
Re: [newbie] NVida TNT2 setup question
Scott Tyson wrote: I'm struggling to find a Doc(s) on what/how is needed to get the new Nvidia drivers going for my TNT2. I did an expert Mandrake 7.1 install and picked Yes to have Xfree86 4.0 installed. Do I just DL the new drivers from Nvidia and follow their install instructions? Do I need a kernel upgrade first? Scott I am sorry, I saw a link on the Linux-Mandrake web site that specifically addressed Nvidia TNT installation. I don't remember how I got to it. you might go on an explore of the web site and see what you can find.