Re: webmin: [newbie-it] informazioni
Il lun, 11 giu 2001, Fabio Coatti ha scritto: Occhio, le barre vanno dritte (//), non backslash (\\) (troppa compito per casa : devo riempire di slash una pagina di quadernino :-)) microsoft ? :-))) ) microCHE?? producono forse elettrodomestici miniaturizzati? se è così dove li vendono? devo cambiare il forno -- ___ Nucleo Gestione Sistemi Informatici MDK GNU/Linux 2.4.x P III 500 256 U.T. 04/2001
[newbie-it] scheda audio
Ho installato gli Alsa drivers, libs, utils per la mia scheda audio, supportata. Ho evitato che il bios avviasse il pnp OS-support. Avviando alsamixer noto che il tipo di scheda è individuato. Quali sono i tools che permettono di verificare le comunicazioni tra sistema operativo e scheda (audio in particolare), nomerodi I/O? Isapnpconfig? Luca
[newbie-it]
__ Do You Yahoo!? Il tuo indirizzo gratis e per sempre @yahoo.it su http://mail.yahoo.it
[newbie-it] apache e permessi
ciao, Scusate se riposto ma spero che qualche d'uno mi risponda e possa aiutarmi. Io ho un problema molto urgente, non riesco ad usare apache da utente,non mi permette di salvare i files nella documentroot . Tentativi fatti: 1) chmod a+rwx /var/www # nessun effetto. 2) ho aggiunto con (userdrake) l'utente al gruppo apache #nessun effetto 3)la mia versione è una mdk 8.0 con apache 1.3.19 ci sono 2 files ci configurazione: commonhttpd.conf e httpd.conf ,quest'ultimo include il primo. La prima direttiva è : Users che di default era apache ed io ho cambiato con il nome utente , e lo stesso ho fatto per la direttiva Group,ho arrestato e riavviato apache ma anche in questo caso niente da fare. Ad un controllo con ls -la tutte le dir e i files sono di apache e root. Spero vivamente che qualcuno mi voglia dare una mano perchè non so che pesci pigliare. ciao e grz lobax
Re: Tablet (Era:Re: [newbie-it] Modem pci 56k !!!)
On Tuesday 12 June 2001 07:48, Andrea Celli wrote: Da una ricerca in rete e` emersa una situazione strana: le Wacom funzionano, di tutte le altre non si trovano notizie ne` positive, ne` negative. Potrebbe semplicemente essere che Lepied (lo scrittore dei driver per linux) ha chiesto le specifiche dei driver alla Wacom e la Wacom gliele ha date. Magari altri le hanno chieste a qualcun altro e non gliele hanno date, o nessuno le ha chieste:-) bye, auguri. -- Devil Inside Experiment - C'era un bambino che odiava la polizia www.acidlife.com/~freefred Davide Banda Partial Arts [2000] - http://62.149.147.100/~freefred ICQ uin 5887365 - PGP key available on keyservers
Re: [newbie-it] nis services high avability services
On Monday 11 June 2001 10:25, you wrote: html ehm, sorry, per favore non scriver in html... levarli dal boot o come posso ovviare al problema e far si che nel boot mi dica quot;bok/bquot; direi siano tutti servizi che non ti servono puoi disabilitarli tramite il drakconf, scegliendo (non ricordo bene la voce, la 8 non l'ha piu') services o qualcosa del genere. Se lasci il mouse sui nomi, di quasi tutti dovrebbe darti una breve descrizione. bye -- Devil Inside Experiment - C'era un bambino che odiava la polizia www.acidlife.com/~freefred Davide Banda Partial Arts [2000] - http://62.149.147.100/~freefred ICQ uin 5887365 - PGP key available on keyservers
Re: [newbie-it] BlackBox
Corrado wrote: Ciao a tutti! .l'unico vero inconveniente è dato dalla visualizzazione dei font di non poche pagine web, quale che sia il browser che utilizzo: i caratteri appaiono se non proprio illeggibili, certo molto sgradevoli da vedere; qualcuno sa se tale problema sia risolvibile? Per Mozilla vedi una lettera arrivata oggi su questa ML. Per Netscape in generale, installa i true type fonts. In drakxconf c'e` un tool che ti permette doi farlo molto facilmente, anche succhiandoli da un'eventuale partizione win. ciao, andrea
Re: [newbie-it] samba
On Tue, 12 Jun 2001 12:43:15 +0200 (CEST) Gigi Cyber [EMAIL PROTECTED] wrote: Un' altra domanda: ho compilato un nuovo kernel, il 2.4.5, e funziona, ma durante il boot compare questo messaggio: fs devpts not supported by kernel io ho cercato nel menú di make menuconfig un'opzione da abilitare, manon l'ho trovata, qualcuno sa dirmi dove la devo cercare? Nella sezione File systems trovi l' apposita opzione da attivare: [*] /dev/pts file system for Unix98 PTYs Ciao -- Sebastiano Cordiano
[newbie] error: failed dependencies
-BEGIN PGP SIGNED MESSAGE-Hash: SHA1 error: failed dependencies -BEGIN PGP SIGNATURE-Version: PGPfreeware 7.0.3 for non-commercial use http://www.pgp.com iQA/AwUBOyW1nx+m/6t6W/SaEQJTagCg+2PICONXT2uLAeTNmqfAsytAJZkAn3aBm51HjlIJk1XDO16Wn2NiNYot=WZ/w-END PGP SIGNATURE-
[newbie] error: failed dependencies:
Let's retry that I'm trying to update peal how do i fix this ? [root@gw /]# rpm -Uvh perl-5.601-1mdk.i586.rpm error: failed dependencies: perl-base is needed by perl-5.601-1mdk perl-base = 5.601-1mdk is needed by perl-5.601-1mdk /usr/bin/perl is needed by autoconf-2.14.1-6mdk /usr/bin/perl is needed by automake-1.4-6mdk /usr/bin/perl is needed by apache-1.3.9-8mdk /usr/bin/perl is needed by cbb-0.78-2mdk /usr/bin/perl is needed by cleanfeed-0.95.7b-4mdk /usr/bin/perl is needed by cvs-1.10.7-1mdk /usr/bin/perl is needed by fvwm2-2.2.2-9mdk /usr/bin/perl is needed by groff-1.11a-10mdk /usr/bin/perl is needed by helptool-2.4-8mdk /usr/bin/perl is needed by kdebase-1.1.2-9mdk /usr/bin/perl is needed by kdemultimedia-1.1.2-3mdk /usr/bin/perl is needed by kdenetwork-1.1.2-5mdk /usr/bin/perl is needed by kernel-source-2.2.13-7mdk /usr/bin/perl is needed by korganizer-1.1.1final-2mdk /usr/bin/perl is needed by lilo-0.21-12mdk /usr/bin/perl is needed by mgetty-sendfax-1.1.14-9mdk /usr/bin/perl is needed by ncurses-devel-5.0_990703-4mdk /usr/bin/perl is needed by pilot-link-0.9.0-9mdk /usr/bin/perl is needed by postgresql-6.5.1-7mdk /usr/bin/perl is needed by rpm-3.0.3-31mdk /usr/bin/perl is needed by samba-2.0.5a-3mdk /usr/bin/perl is needed by sharutils-4.2-5mdk /usr/bin/perl is needed by svgalib-1.4.0-10mdk /usr/bin/perl is needed by ucd-snmp-3.6.2-1mdk /usr/bin/perl is needed by ucd-snmp-utils-3.6.2-1mdk /usr/bin/perl is needed by uucp-1.06.1-12mdk /usr/bin/perl is needed by vim-common-5.4-3mdk /usr/bin/perl is needed by WindowMaker-0.60.0-6mdk /usr/bin/perl is needed by xboard-4.0.0-4mdk /usr/bin/perl is needed by mod_perl-1.21-16mdk /usr/bin/perl is needed by mod_perl-1.21-17mdk /usr/bin/perl is needed by tetex-doc-1.0.6-4mdk /usr/bin/perl is needed by procinfo-16-4mdk /usr/bin/perl is needed by apache-devel-1.3.9-8mdk /usr/bin/perl is needed by emumail-modules-4.5-4 /usr/bin/perl is needed by emumail-4.5-6 /usr/bin/perl is needed by ircd-2.10.3-5mdk /usr/bin/perl is needed by inn-2.2.3-1.3mdk /usr/bin/perl is needed by mc-4.5.38-4.1mdk /usr/bin/perl is needed by initscripts-4.23-35mdk /usr/bin/perl is needed by curl-7.7-1 /usr/bin/perl is needed by wu-ftpd-2.6.1-8.6mdk /usr/bin/perl is needed by MySQL-client-3.22.25-4mdk /usr/bin/perl is needed by MySQL-3.22.25-4mdk /usr/bin/perl is needed by sgml-tools-1.0.9-3.1mdk /usr/bin/perl is needed by webmin-0.86-1 /usr/bin/perl5 is needed by xscreensaver-3.17-6mdk Michael FalzonGremlin Consultancy P/L405 Francis StreetBrooklyn, Vic Australia 3025Ph: 61+ 393153855Fax: 61+393151585mobile: 0419235363Registered Linux user #204397
Re: [newbie] x won't start
Stephen Hansen-Sturm wrote: I cannot start x. I am using Mandrake 7.2, and I have XFree86 3.36 and 4.01 both installed. The computer is an IBM ThinkPad 770z, This may be a long shot, but I have had similar problems starting X, as well as other screen resolution problems, stemming from incomplete installations. It took me a while to figure it out, but in desperation, I would re-install and notice that the installation took a lot longer the second or third time and offered several options that didn't present themselves initially.I don't know why this happens, but I know that it has happened several times to me, never on my desktop, but only on my Toshiba Satellite Pro notebook. It may be some kind of notebook specific quirk. I'm not sure if this will help you, but I just thought I would mention it for consideration.Maybe re-installing will be one more alternative to consider before giving up, if nothing else works. ShalomOut Chal Registered Linux user #217118 Nothing is impossible, to the man who will not listen to reason.
[newbie] changed hostname, bad result
I took the advice given me and changed my hostname using linuxconf. Now, when the system boots up, the logon manager (or whatever it is called) does not start. I can start x and kde, but when i start kde, the terminal says cannot find own hostname: system is severely misconfigured. Any help (who know what they are talking about and won't give me advice that will severely misconfigure my system again) would be greatly appreciated. -- / | |Noah Richards |[EMAIL PROTECTED] | \
Re: [newbie] changed hostname, bad result
Noah Richards a écrit : I took the advice given me and changed my hostname using linuxconf. Now, when the system boots up, the logon manager (or whatever it is called) does not start. I can start x and kde, but when i start kde, the terminal says cannot find own hostname: system is severely misconfigured. Any help (who know what they are talking about and won't give me advice that will severely misconfigure my system again) would be greatly appreciated. You should try to change the file /etc/sysconfig/network, specifically the line HOSTNAME. If you have access to KDE, you can use the Mandrake Control Center : Network/Connexion and Configure. You will be asked for the hostname. -- Frédéric Bothamy [EMAIL PROTECTED] -- QA Team
RE: [newbie] changed hostname, bad result
you shoul change the /etc/hosts file, and add line: 127.0.0.1 localhost [you_machine_name] this should fix the problem -Original Message- From: Noah Richards [mailto:[EMAIL PROTECTED]] Sent: Tuesday, June 12, 2001 9:47 AM To: [EMAIL PROTECTED] Subject: [newbie] changed hostname, bad result I took the advice given me and changed my hostname using linuxconf. Now, when the system boots up, the logon manager (or whatever it is called) does not start. I can start x and kde, but when i start kde, the terminal says cannot find own hostname: system is severely misconfigured. Any help (who know what they are talking about and won't give me advice that will severely misconfigure my system again) would be greatly appreciated. -- / | |Noah Richards |[EMAIL PROTECTED] | \
[newbie] device /usr busy? SAY WHAT?
Hey group I just got some weird errors when I went to either shut down or reboot the server. It said something like /usr was busy and it retried to umount again approx 3 or 4 times, has anyone else had this error and know how to correct it so on bootup it does not have to do a fsck of the usr ? Thanks
RE: [newbie] changed hostname, bad result
I have a similar problem along similar lines to the question below. I have Mandrake 7.1 installed, i am wanting to have a play with Apache, I have it starting as a service on startup, but when I try and connect using http://localhost/ or http://localhost.localdomain/ or 127.0.0.1 it just returns the error that the host is unreachable. I have tried to start apache manually, but resulting in the same problem, it matters not wether I am logged on as root or a standard user. Any ideas? is this some sort of security option that I may have inadvertently switched on? -- Jamie Adams Housing Assistant 41 Castle Road SCARBOROUGH North Yorkshire, YO11 1BJ Tel: (01723) 507543 Fax: (01723) 355862 -- From: Michael Spivak[SMTP:[EMAIL PROTECTED]] Sent: 12 June 2001 10:53 To:'[EMAIL PROTECTED]'; [EMAIL PROTECTED] Subject: RE: [newbie] changed hostname, bad result you shoul change the /etc/hosts file, and add line: 127.0.0.1 localhost [you_machine_name] this should fix the problem -Original Message- From: Noah Richards [mailto:[EMAIL PROTECTED]] Sent: Tuesday, June 12, 2001 9:47 AM To: [EMAIL PROTECTED] Subject: [newbie] changed hostname, bad result I took the advice given me and changed my hostname using linuxconf. Now, when the system boots up, the logon manager (or whatever it is called) does not start. I can start x and kde, but when i start kde, the terminal says cannot find own hostname: system is severely misconfigured. Any help (who know what they are talking about and won't give me advice that will severely misconfigure my system again) would be greatly appreciated. -- / | |Noah Richards |[EMAIL PROTECTED] | \ _ This message has been checked for all known viruses by Star Internet delivered through the MessageLabs Virus Scanning Service. For further information visit http://www.star.net.uk/stats.asp or alternatively call 01285 884400. _ This message has been checked for all known viruses by Star Internet delivered through the MessageLabs Virus Scanning Service. For further information visit http://www.star.net.uk/stats.asp or alternatively call 01285 884400.
Re: [newbie] New LM8 PowerPack installation freezes on Boot CD
Alan Shoemaker wrote: Romanator wrote: Hi list and Mandrake Support, I am very disappointed. It appears that I have a bad Boot Core System Boot CD. The light on the CD stays on for about 10 minutes followed by and error message: An error occurred nothing found while parsing /mnt/var/lib/urpmi/hdlist.CD1 Core System CD(x86) How do I get a replacement? Roman Registered Linux User #179293 This email is powered by the Tux Email Utility On Monday 11 June 2001 20:45, you wrote: Hi everybody, Well, I just received the new Powerpack and I cannot get it installed. I was running expert mode. In fact the first RAM disk crapped out and I was prompted to retry again by pressing the [enter] key. After partitioning /boot / /usr /swap and /home, the Boot Disk was searching the programs to install, the motor stopped while the light on CD was still on, and the following error message appeared: Error Message An error occurred nothing found while parsing /mnt/var/lib/urpmi/hdlist.CD1 Core System CD(x86) What the heck is going on? My beta installed instantly. I can't get anything installed from the Powerpack!! Any ideas? The instructions for getting bad media replaced are locatedin in a small brochure (CD sleeve sized) packed with the CD's (has tux on the front) and it says: REPLACEMENT MEDIA If you need a replacement disc due to damaged product, you can obtain a replacement within 90 days of your purchase date. Send the damaged product, acopy of the sales receipt, and a letter briefly explaining the problem to: User Services Macmillan Software 201 W. 103rd Street Indianapolis, IN 46290 -- Alan Hi Alan, I have to register it today on the Mandrake web site first, yes? Shouldn't I report this to Mandrake so that it can be logged? And, should I send the entire package back? Shipping or Mailing Is US Post preferable? Roman Registered Linux User #179293 This email is powered by the Tux Email Utility
Re: [newbie] LimeWire Installation
Go to http://java.sun.com/j2se/1.3/jre/download-linux.html On Tuesday 12 June 2001 02:18, [EMAIL PROTECTED] wrote: hy! whatis the filename/link of the linux jre? i couldnt find it- i always ended up with a search result like solaris jre or linux develoment package(20mb!). thanks regards On Tue, 12 Jun 2001, Jose wrote: I am running Mandrake 8.0 and was having problems installing LimeWire. I found some instructions that enabled me to finally install and run LimeWire. First got to http://java.sun.com and download the Java Runtime Enviroment 1.3.1 for Linux. Then get LimeWireOther.zip from http://www.limewire.com/ finally as root run /usr/java/jre1.3.1/bin/java -classpath LimewireOther.zip install then just run the binary as /home/your_directory/LimeWire/LimeWire It worked for me and hopefully for everyone else. -- Jose [EMAIL PROTECTED] -- Jose [EMAIL PROTECTED]
FW: [newbie] changed hostname, bad result
I have a similar problem along similar lines to the question below. I have Mandrake 7.1 installed, i am wanting to have a play with Apache, I have it starting as a service on startup, but when I try and connect using http://localhost/ or http://localhost.localdomain/ or 127.0.0.1 it just returns the error that the host is unreachable. I have tried to start apache manually, but resulting in the same problem, it matters not wether I am logged on as root or a standard user. Any ideas? is this some sort of security option that I may have inadvertently switched on? -- Jamie Adams Housing Assistant 41 Castle Road SCARBOROUGH North Yorkshire, YO11 1BJ Tel: (01723) 507543 Fax: (01723) 355862 -- From: Michael Spivak[SMTP:[EMAIL PROTECTED]] Sent: 12 June 2001 10:53 To:'[EMAIL PROTECTED]'; [EMAIL PROTECTED] Subject: RE: [newbie] changed hostname, bad result you shoul change the /etc/hosts file, and add line: 127.0.0.1 localhost [you_machine_name] this should fix the problem -Original Message- From: Noah Richards [mailto:[EMAIL PROTECTED]] Sent: Tuesday, June 12, 2001 9:47 AM To: [EMAIL PROTECTED] Subject: [newbie] changed hostname, bad result I took the advice given me and changed my hostname using linuxconf. Now, when the system boots up, the logon manager (or whatever it is called) does not start. I can start x and kde, but when i start kde, the terminal says cannot find own hostname: system is severely misconfigured. Any help (who know what they are talking about and won't give me advice that will severely misconfigure my system again) would be greatly appreciated. -- / | |Noah Richards |[EMAIL PROTECTED] | \ _ This message has been checked for all known viruses by Star Internet delivered through the MessageLabs Virus Scanning Service. For further information visit http://www.star.net.uk/stats.asp or alternatively call 01285 884400. _ This message has been checked for all known viruses by Star Internet delivered through the MessageLabs Virus Scanning Service. For further information visit http://www.star.net.uk/stats.asp or alternatively call 01285 884400.
Re: [newbie] Masquerading and IPTables
--- Ross Slade [EMAIL PROTECTED] wrote: 1. Is there a howto on Masquerading for Mandrake 8.0? I had it working fine under 6.0 - 7.1, but not now... I have a static IP (203.14.156.30) and an internal LAN using 10.0.2.15 for this box and 10.0.2.16 for a WinME box. One thing I have found is that a friend's box has four tabs in netconf, one being for forwarding and such - I don't have that tab available so something's missing - can someone please tell me what package will add that seemingly critical tab to netconf? 2. I had a resonable firewall under the older versions using ipchains - what's the best way to convertthe old one into iptables? (since it seems I can no longer use ipchains?) Thanks in advance for any help... -Ross -- http://bunyip.apana.org.au [ICQ No.9391313] {For email change borg to org} Ok I haven't used netconf before but there is a good howto (it's really not as cryptic as some of the others) the webserver is down but you can find it here: http://netfilter.samba.org/ plus a decent overveiw of iptables is here: http://pinehead.com/articles.php?view=371 and another: http://www.unixreview.com/articles/2001/0104/0104l/0104l.htm another: http://www.linuxnewbie.org/nhf/intel/security/iptables_basics.html and one more for fun: http://www.securityportal.com/cover/coverstory20010122.html but if your really happy with ip chains it should be available as a module that you can load. Be warned though that the ICQ, Quake, and raudio modules have all disappeared in the 2.4 kernel series for now. There's now an irc module and ftp module but thats it. Good Luck. Jeff __ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail - only $35 a year! http://personal.mail.yahoo.com/
RE: [newbie] changed hostname, bad result
Ross Jamie, Take a look at /var/logs/httpd/error_log, and send the list a copy--all error messages from apache get logged there. Michael -- Michael Viron Senior Systems Administration Consultant Web Spinners, University of West Florida At 10:42 PM 06/12/2001 +1000, Ross Slade wrote: On Tue, 12 Jun 2001, Adams, Jamie wrote: I have a similar problem along similar lines to the question below. I have Mandrake 7.1 installed, i am wanting to have a play with Apache, I have it starting as a service on startup, but when I try and connect using http://localhost/ or http://localhost.localdomain/ or 127.0.0.1 it just returns the error that the host is unreachable. I have tried to start apache manually, but resulting in the same problem, it matters not wether I am logged on as root or a standard user. Any ideas? is this some sort of security option that I may have inadvertently switched on? I have this problem too, but it's case for whatever url/ip I use to try to access my web server with. Worked fine under Mandrake 6.0-7.2, must be another subtle tweak we have to learn... 8-) If someone has an idea on this I'd love to hear it. -Ross -- http://bunyip.apana.org.au [ICQ No.9391313] {For email change borg to org} Cynic, n.: One who looks through rose-colored glasses with a jaundiced eye.
Re: [newbie] Install help
A fresh install takes me less than 45 mins on my AMD k6II 450, with 256mb ram. I understand that upgrades take hours (never done one) so it appears that you did an upgrade rather than a clean install. Are you sure you did an install and not an upgrade, did you format the partitions /root /usr and others (or the entire disk for that matter) during your install ? I suggest you back up anything you need and install again, when you get to partitions to use in your install process make sure you format everything (except /home if you have it in a separate partition and want to keep it) You can also leave /usr/local alone if it is a separate partition from /usr. Michael -- Michael Viron Senior Systems Administration Consultant Web Spinners, University of West Florida -- Poogle Registered Linux user 182657 (added to sig for the benefit of those irritated by it)
RE: [newbie] changed hostname, bad result
On Tue, 12 Jun 2001, Michael D. Viron wrote: Take a look at /var/logs/httpd/error_log, and send the list a copy--all error messages from apache get logged there. Sorry, I should have posted that the first time... -- [Tue Jun 12 16:11:36 2001] [crit] (98)Address already in use: make_sock: could not bind to port 80 -- Prevented by a firewall maybe? If so it's probably also the cause of my masquerading problems as well...I'm starting to dislike these new-fangled firewall tools (ie. I don't understand then yet). 8-) I have Mandrake 7.1 installed, i am wanting to have a play with Apache, I have it starting as a service on startup, but when I try and connect using http://localhost/ or http://localhost.localdomain/ or 127.0.0.1 it just returns the error that the host is unreachable. I have this problem too, but it's case for whatever url/ip I use to try to access my web server with. Worked fine under Mandrake 6.0-7.2, must be -Ross -- http://bunyip.apana.org.au [ICQ No.9391313] {For email change borg to org} Out of sight is out of mind. -- Arthur Clough
[newbie] hdparm
Hi All, I've got some troublesome readings from two identical hard drives set up the same. Does anyone know why they are performing so differently? I suppose hda may be bad, but I was hoping to find some other way to test this. Thanks! Scott THE DATA Here are the hard drives: hda: Maxtor 52049H4, ATA DISK drive (master ide0) hdb: Maxtor 52049H4, ATA DISK drive (slave ide0) Running hdparm I get: [root@haldane scott]# hdparm -Tt /dev/hda /dev/hda: Timing buffer-cache reads: 128 MB in 0.87 seconds =147.13 MB/sec Timing buffered disk reads: 64 MB in 31.17 seconds = 2.05 MB/sec [root@haldane scott]# hdparm -Tt /dev/hdb /dev/hdb: Timing buffer-cache reads: 128 MB in 0.85 seconds =150.59 MB/sec Timing buffered disk reads: 64 MB in 2.21 seconds = 28.96 MB/sec [root@haldane scott]# hdparm /dev/hda Here are the settings: /dev/hda: multcount= 16 (on) I/O support = 3 (32-bit w/sync) unmaskirq= 0 (off) using_dma= 1 (on) keepsettings = 0 (off) nowerr = 0 (off) readonly = 0 (off) readahead= 8 (on) geometry = 2482/255/63, sectors = 39882528, start = 0 [root@haldane scott]# hdparm /dev/hdb /dev/hdb: multcount= 16 (on) I/O support = 3 (32-bit w/sync) unmaskirq= 0 (off) using_dma= 1 (on) keepsettings = 0 (off) nowerr = 0 (off) readonly = 0 (off) readahead= 8 (on) geometry = 2491/255/63, sectors = 40020624, start = 0
Re: [newbie] identd
On June 12, 2001 11:12 am, Dan Gordon wrote: Hi, I know this has been asked before but i just installed Mandrake 8.0 and i would like to allow identd so i can connect to irc but the built in fire wall wont have it. I know this can be changed but am not sure how. Right now its using the tiny firewall, i used to use Firestarter but it wont make now? Thanks in advance. Dan ; The Tiny Firewall in LM 8.0 is actually Bastille-Firewall. In the /etc folder, you should find another folder called Bastille (/etc/Bastille) . Inside of that you should find bastille-firewall.cfg . Open that in Advanced Editor, and look around. It's as easy to modify as smb.conf , and has pretty good descriptions about all the stuff it does. Save the changes, and restart the firewall or (Gasp!) reboot ! Should work fine. L8R Dan LaBine
RE: [newbie] RAID controller support in LM8?
BTW, thanks for all the help! It's been invaluable to me so far. If it's not too much trouble, could you take a look at this motherboard and tell me what you think? http://store.yahoo.com/thechipmerchant/3485-1.html The following is a similar one I found on www.linhardware.com , it's the A7M not the A7A above (not sure of the difference). http://lhd.zdnet.com/db/dispproduct.php3?DISP?2676 I provide the link because it has some more spec info that might be useful. Thanks! -Paul R P.S.scsi not so important to me anymore, but jumperless mobo is, also wanted to point out that it's for an Athlon 1.4ghz cpu. (I'm considering an ata/100 drive) On Monday 11 June 2001 08:33, Paul Rodríguez wrote: Ok, so what I'm looking for at the moment is a good socket a 266mhz fsb ddr capable no audio at least 5 pci slots usb non-raid specific board with scsi controller What do you think about these options, am I looking for the right thing? Any reccomendations? -paul r _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com
Re: [newbie] Bash scripts portability
It was Tue, 12 Jun 2001 13:05:15 +0100 when n6tadam wrote: bash: /usr/bin/script : not found bash: /usr/bin/script Line X command not found (Line X being the last line in the script which is blank) Does anybody know why, or indeed what causes this, and if so, how do I correct it. Unless it is a dark secret, you could post that part of the actual script. Perhaps that sheds some light Paul -- What good is a ticket to the good life, if you can't find the entrance? http://nlpagan.net - Registered Linux User 174403 Linux Mandrake 7.2 - Sylpheed 0.4.66 ** http://www.care2.com - when you care **
Re: [newbie] device /usr busy? SAY WHAT?
No Ijust have regular Mandrake 8.0 with nothing but ext2 all round. On Tuesday 12 June 2001 08:05 am, so spoke Michael Leone: I saw this, when loading VMWware in kernel 2.2.18 (it used one of it's SUSE pre-compiled kernels - i.e., NOT a Mandrake kernel). So, since I have multiple kernels to boot to, I use VMWare in kernel 2.4.5. This made it compile it's own kernel modules, and I haven't seen that problem since. Are you running VMWare? And on a ResierFS partition, as I am? - Original Message - From: Chubby Vic [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, June 12, 2001 5:14 AM Subject: [newbie] device /usr busy? SAY WHAT? Hey group I just got some weird errors when I went to either shut down or reboot the server. It said something like /usr was busy and it retried to umount again approx 3 or 4 times, has anyone else had this error and know how to correct it so on bootup it does not have to do a fsck of the usr ? Thanks
Re: [newbie] Bash scripts portability
I don't know if this will help, but try inserting an extra blank line at the bottom of the file (especially if there is no blank line at all now. I've run into problems on other systems, languages, applications that have trouble dealing with a line without a line feed ending it. Good luck, Randy Kramer n6tadam wrote: Dear List, I wonder if someone can offer assistance. One of my hobbies at school is to write bashscripts for our two proxy servers. I usually write them on my home network, which runs Suse 7.0. Our two proxy servers also run SuSE Linux 7.0. The problem I am having is that when I take a bash script from home (which works), and try and run it on the proxy server, I either get one of the following error messages: bash: /usr/bin/script : not found bash: /usr/bin/script Line X command not found (Line X being the last line in the script which is blank) Does anybody know why, or indeed what causes this, and if so, how do I correct it. Thanks in Anticipation, Regards, Thomas Adam Please note that the content of this message is confidential between the original sender and the intended recipient(s) of the message. If you are not an intended recipient and/or have received this message in error, kindly disregard the content of the message and return it to the original sender. If you have any complaints about this message please reply to: [EMAIL PROTECTED] The Purbeck School E-Mail server running: users.purbeck.dorset.sch.uk
RE: [newbie] RAID controller support in LM8?
On Mon, 11 Jun 2001, Paul Rodríguez wrote: If it's not too much trouble, could you take a look at this motherboard and tell me what you think? http://store.yahoo.com/thechipmerchant/3485-1.html OK, but I would suggest the A7V133 for a couple of reasons 1) ALiMAGiK chipset has not garnered a lot of praise (though neither has VIA, but it has at least been around long enough to start maturing, better BIOS, etc) 2) The A7V133 has a RAID0/ATA100 controller so you can hook up to 8 IDE devices to the motherboard. By default the Promise controller on the A7V is set to ATA100 support and this most likely what you want under Linux. 3) Cheaper Compare back to back http://www.asus.com.tw/products/Motherboard/socketa/a7a266/spec.html http://www.asus.com.tw/products/Motherboard/socketa/a7v133/spec.html People might argue that the A7A266 has slots for DDR RAM, but the benchmarks so far do not indicate that having DDR RAM gives a significant improvement in speed (yet). You can't use both DDR (PC2100) and PC133 simultaneously with the A7A266. The following is a similar one I found on www.linhardware.com , it's the A7M not the A7A above (not sure of the difference). http://lhd.zdnet.com/db/dispproduct.php3?DISP?2676 I provide the link because it has some more spec info that might be useful. http://www.asus.com.tw/products/Motherboard/socketa/a7m266/spec.html The A7M266 uses DDR RAM and has the VIA chipset. It supports up to 2GB of RAM (the A7V supports 1.5GB, and the A7A 3GB, though I have never personally heard of a 1GB stick of RAM, but maybe they exist). All of these boards support 266/200Mhz FSB. I have a 1.2GHz AMD running on the A7V133 and am very pleased with it, in particularly the feature/price ratio. The extra ATA100 controller is welcome when you have 2 CD-ROMS, a ZIP, and 3 IDE drives. But, people may have good arguments why you should pay $15-$25 more for the A7A266 (DDR RAM support maybe ...) Albion Albion E. Baucom http://www.cse.ucsc.edu/~baucom
Re: [newbie] Duplicate emails from list
On Monday 11 June 2001 23:21, Fireman71 wrote: Am I the only one receiving two copies of each email sent to the list? Tried unsubscribing and resubscribing right after this started but it keeps sending me two. Been going on for about a week now. Ian I get duplicates of some, but not all, e-mails sent to the list. -- Walter Luffman, [EMAIL PROTECTED]Medina, TN USA Supercharged with extra glucose! (Type 2 diabetic 5/99, d/e/m/motorcycle) Sage, purple 1998 Honda VT1100C Shadow Spirit
Re: [newbie] Duplicate emails from list
Quoting Walter Luffman [EMAIL PROTECTED]: I get duplicates of some, but not all, e-mails sent to the list. Yes, I also get dupes of some of the emails. ...Dave
[newbie] Crystal Semiconducter CS4236B Audio Codec
I have the above mentioned sound card and so far I can't hear sound in Mandrake 8.0, what I'm wondering is, if anyone out there has drivers for this particular card and/or if they could help me to get it to work. Thanks so much for your help. Regards Curtis Matthiesen _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
[newbie] Removal
Hi, How do i get removed from this list Thanks
[newbie] SNF and cable modem
I am running SNF with two netgear fa-310tx. I am able to log on to the linux box with my win98 box, But I can't get to the internet. Since the modem uses a dynamic IP, how should I set up eth1? Thanks for any help. Snale _ Get your FREE download of MSN Explorer at http://explorer.msn.com
Re: [newbie] New LM8 PowerPack installation freezes on Boot CD
Romanator wrote: Alan Shoemaker wrote: Romanator wrote: Hi list and Mandrake Support, I am very disappointed. It appears that I have a bad Boot Core System Boot CD. The light on the CD stays on for about 10 minutes followed by and error message: An error occurred nothing found while parsing /mnt/var/lib/urpmi/hdlist.CD1 Core System CD(x86) How do I get a replacement? Roman Registered Linux User #179293 This email is powered by the Tux Email Utility On Monday 11 June 2001 20:45, you wrote: Hi everybody, Well, I just received the new Powerpack and I cannot get it installed. I was running expert mode. In fact the first RAM disk crapped out and I was prompted to retry again by pressing the [enter] key. After partitioning /boot / /usr /swap and /home, the Boot Disk was searching the programs to install, the motor stopped while the light on CD was still on, and the following error message appeared: Error Message An error occurred nothing found while parsing /mnt/var/lib/urpmi/hdlist.CD1 Core System CD(x86) What the heck is going on? My beta installed instantly. I can't get anything installed from the Powerpack!! Any ideas? The instructions for getting bad media replaced are locatedin in a small brochure (CD sleeve sized) packed with the CD's (has tux on the front) and it says: REPLACEMENT MEDIA If you need a replacement disc due to damaged product, you can obtain a replacement within 90 days of your purchase date. Send the damaged product, acopy of the sales receipt, and a letter briefly explaining the problem to: User Services Macmillan Software 201 W. 103rd Street Indianapolis, IN 46290 -- Alan Hi Alan, I have to register it today on the Mandrake web site first, yes? Shouldn't I report this to Mandrake so that it can be logged? And, should I send the entire package back? Shipping or Mailing Is US Post preferable? Roman Registered Linux User #179293 This email is powered by the Tux Email Utility Romando what Civileme says. You see I was going under the assumption that all Powerpacks in North America were manufactured by Macmillan which I find is not true if you buy from our website. So, do what Civileme bids you and you can't go wrong. :) -- Alan
Re: [newbie] How are the dirs. structured?
Leif: Linux handles files much differently than DOS. There's an excellent four part article at www.mandrakeuser.org/docs/basics/bfiles.html. Regards, Carroll Leif Madsen wrote: Hey all, I'm coming from a DOS (since version 4.0) and Windows (no biggie.. I got KDE if I need it :)) environment, and I'm not totally sure how the directory structure is laid out? What are the DOS equivelants (if any) of the /etc/ /usr/ etc.. directories? Where do files that I compile and install should go? Is there a progra~1 type directory? I just have a wierd fetish with keeping everyone on my hard drive organized, and don't want to go about and have stuff where things shouldn't go in Linux. Also.. for a download dir.. should it be /usr/download ? Thanks for the help! If you want to point me to a HOWTO.. I'd be more than happy to read it. Thanks again, Leif Madsen
Re: [newbie] How are the dirs. structured?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Because Linux is a multi-user system, there are several branches of the directory tree. First, there is root ( / ), where the whole directory tree is rooted (sorry about that...) and where system-wide files are stored. By this I mean programs, utilities, logs, and the like. Most logs are found somewhere in /var. Most temp files are in /tmp. Most programs are somewhere in /usr, /opt, or /bin. Then, there is the special branch for individual user accounts, /home. In /home are all the user directories (on my laptop, there are two directories, /home/dave and /home/public). If you want a downloads directory, either let users create their own under their home directory (/home/dave/downloads, for example), or create a public directory (/home/public on my laptop). If you go with a global public directory, be sure to set the permissions correctly. If each user has their own download directory in their home directory, then let them create it so that they own it. You can also create a /pub directory (off root), which could be a global downloads directory. Again, be sure to set the permissions correctly. This setup is commonly found on ftp servers. As for programs that you compile, you can either leave them in your home directory (or in a subdirectory, maybe called bin) for your use only, or you can install them for anyone to use, in /usr/local/bin or whatever. Any good book on running Linux will give you the basics of the Linux directory tree, and where things generally go. My own $.02 Dave On Tuesday 12 June 2001 12:54, thus spake Leif Madsen: Hey all, I'm coming from a DOS (since version 4.0) and Windows (no biggie.. I got KDE if I need it :)) environment, and I'm not totally sure how the directory structure is laid out? What are the DOS equivelants (if any) of the /etc/ /usr/ etc.. directories? Where do files that I compile and install should go? Is there a progra~1 type directory? I just have a wierd fetish with keeping everyone on my hard drive organized, and don't want to go about and have stuff where things shouldn't go in Linux. Also.. for a download dir.. should it be /usr/download ? Thanks for the help! If you want to point me to a HOWTO.. I'd be more than happy to read it. Thanks again, Leif Madsen City Centre Liquidations Phone: 519-652-6566 ext 244 Fax : 519-652-6606 [EMAIL PROTECTED] - -- Nihil tam munitum quod non expugnari pecunia possit. (No fortification is such that it cannot be subdued with money. - - Marcus Tullius Cicero, 106-43 B.C. -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE7JmEaOiMJhTaLf3MRAnNEAJ9R+7sEl7HZKFe6ZhNXN+Zc0pTGsACghLNG D5bFMr99YMvuC4/RYbl9Ezg= =HFdr -END PGP SIGNATURE-
[newbie] SCSI CD-ROM not recognised at setup...
SCSI CD-ROM not recognised at setup...so I borrowed an IDE CD from another machine. Mandrake 8 set itself up perfectly, even finding and mounting the SCSI CD (which neither RedHat or Mandrake could find in the setup routine). So far so good. I put the IDE CD back in to its machine, and run Mandrake. No problem until I try to install a printer. Then it says please insert the setup device... /mnt/cdrom is there even though the CD is no longer in the machine. I commented out the /mnt/cdrom line in fstab and rejigged the /mnt/cdrom2 line so that the machine finds the CD ROM. The line in fstab that I edited started as: /mnt/cdrom2 /mnt/cdrom2 supermount fs=iso9660,dev=/dev/cdrom2 0 0 and I changed it to /mnt/cdrom /mnt/cdrom supermount fs=iso9660,dev=/dev/cdrom2 0 0 and /mnt/cdrom now finds the SCSI CD-ROM. IS this right? I still have problems though when in X with installing rpms. Someone told me I should recompile the kernel, but I cannot find the source and would need a good HOW-TO for that. Finally, I am trying to run the whole thing without a monitor, hence I am doing everything with telnet to the shell. So please bear that in mind if you are kind enough to help. Thanks Thomas Get your own FREE E-mail address at http://www.linuxfreemail.com Linux FREE Mail is 100% FREE, 100% Linux, and 100% yours!
Re: [newbie] Crystal Semiconducter CS4236B Audio Codec
i couldn't set up my cs4232 card properly, so i tried installing it as a SoundBlaster 16 and IT WORKED! io=220 irq=5 dma1=1 dma2=5 mpu=330 if the sound sounds crappy, triy modifying this parameters...
[newbie] Small script for my signature
Hey all, I'm looking for a script that I can use to output a signature for me. It's easy enough to have KMail use a file for the signature, so that is fine. What I'm looking for is a script or program to make a new signature every 24 hours. What I want to do is add something like this: Linux Mandrake running stable for 'X' number of days without reboot! ...or something to that affect. Any ideas? Thanks, Leif Madsen City Centre Liquidations Phone: 519-652-6566 ext 244 Fax : 519-652-6606 [EMAIL PROTECTED]
[newbie] new hard drive won't boot with scsi present
not strictly a mandrake problem but impinging on my ability to use it fully if any you folks can help me i'd be very grateful, scenario: fic va503+ mb with 6gb udma 33 drive and 3.2gb scsi drive attached via advansys ultra scsi adapter plus other stuff, all works no problem booting off the ide drive using lilo to choose between win and linux, that is, up till now THEN! i bought a seagate 30gb udma100 drive to replace the 6 gb one, i used the seagate utility to toggle the udma of this new drive to 2 (33) since that is all my motherboard supports and used partition magic to clone the partitions off the old drive to the new, swapped, fdisk /mbr'ed the new drive and rebooted, expecting to go straight into windows, but it hangs after initialising the scsi bios the hard drive led flashes and the floppy led stays permanently on, swap the old drive back and everything id fine, if i put the new drive back and then remove the SCSI drive the machine boots! this does not make sense to me, why would the new drive care that a scsi drive was present when the old one doesn't? both ide drives are set to be master, both are the only ide drive present at the time, both will boot with no other drive present but only the older one will boot wioth the scsi drive present also, with both the new drive and the scsi present the floppy won't boot either, clearly there is an issue connected to the very first part of the boot process but it goes beyond my knowledge, if i use an old isa (non busmastering) scsi card then the system will boot from the new drive with the scsi drive present, but now the scsi dos partitions have the wrong letters and this card is no good for me as the card isn't fast enough, using the isa scsi card i installed lilo onto the new drive and i can now get the lilo prompt and i can boot linux but not win98! any one with any ideas or some good reason for thinking that the new drive is faulty will be doing me a great favour, there are too many variables for me to just phone up dabs and tell them that their drive isn't working properly bascule p.s. having messed about a bit i find that with the new drive and the scsi drive present the floppy drive wont boot...off win 9x disks! it will boot a linux boot disk and also a dos 6.22 disk,
Re: [newbie] SNF and cable modem
assuming you can access 'https://firewall.here:8443' then you can login with your admin password and go to 'internet accesscable,lan' and configure from there, i am running rc1 and i am assuming that not much has changed in the snf version, you will need to choose 'dhcp' for your nic that is connected to your cable modem, and also which dhcp client to use, i use dhcpcd and all works okay, for me i have found that i don't need to specify any external host names or stuff but that might not be the case for you there is list for this distro - [EMAIL PROTECTED] 'subscribe' in the subject line - iirc bascule On Tuesday 12 June 2001 7:05 pm, you wrote: I am running SNF with two netgear fa-310tx. I am able to log on to the linux box with my win98 box, But I can't get to the internet. Since the modem uses a dynamic IP, how should I set up eth1? Thanks for any help. Snale _ Get your FREE download of MSN Explorer at http://explorer.msn.com
[newbie] Print settings for KMail
Folks, Anyone know how to keep printer settings for KMail? When I try to print out a message, the print dialog box has the paper size set to A4 instead of letter. I am able to change it, however when I restart KMail again, it has reverted back to A4. Any suggestions? -- Terry Sheltra PC Technician / Asst. Network Administrator University of Virginia School of Architecture (434) 982-3047 [EMAIL PROTECTED] - Registered Linux User #218330
Re: [newbie] SNF and cable modem
Your modem is only configured to handle on IP address and therefore you need to resink it every single time you turn on one computer or another. You can't have both on the internet at the same time, unless you have a router. I had the same problem, a quick phone call to the cable service provider and a extra 6.95 charge a month got me another IP address and now both computers can connect. Ilya Sterin From: "Ryan Windham" <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] Subject: [newbie] SNF and cable modem Date: Tue, 12 Jun 2001 14:05:21 -0400 I am running SNF with two netgear fa-310tx. I am able to log on to the linux box with my win98 box, But I can't get to the internet. Since the modem uses a dynamic IP, how should I set up eth1? Thanks for any help. Snale _ Get your FREE download of MSN Explorer at http://explorer.msn.com Get your FREE download of MSN Explorer at http://explorer.msn.com
Re: [newbie] SNF and cable modem
I receive my internet service through Charter Pipeline here in Wisconsin. We have always had up to 3 ip addresses here available by simply using a hub with a uplink port at no extra cost. You might want to check out other ISP's for a better deal with the extra IP addresses. 3 Ten Meg mailboxes is also standard with Charter as well as a 10 meg webpage. Tazmun - Original Message - From: Ilya Sterin To: [EMAIL PROTECTED] ; [EMAIL PROTECTED] Sent: Tuesday, June 12, 2001 2:36 PM Subject: Re: [newbie] SNF and cable modem Your modem is only configured to handle on IP address and therefore you need to resink it every single time you turn on one computer or another. You can't have both on the internet at the same time, unless you have a router. I had the same problem, a quick phone call to the cable service provider and a extra 6.95 charge a month got me another IP address and now both computers can connect. Ilya Sterin From: Ryan Windham To: [EMAIL PROTECTED] Subject: [newbie] SNF and cable modem Date: Tue, 12 Jun 2001 14:05:21 -0400 I am running SNF with two netgear fa-310tx. I am able to log on to the linux box with my win98 box, But I can't get to the internet. Since the modem uses a dynamic IP, how should I set up eth1? Thanks for any help. Snale _ Get your FREE download of MSN Explorer at http://explorer.msn.com Get your FREE download of MSN Explorer at http://explorer.msn.com
Re: [newbie] Duplicate emails from list
I was previously informed these are not dupes but random enhancements for the listGRIN On Tuesday 12 June 2001 13:44, you wrote: Quoting Walter Luffman [EMAIL PROTECTED]: I get duplicates of some, but not all, e-mails sent to the list. Yes, I also get dupes of some of the email's. ...Dave
Re: [newbie] Duplicate emails from list
It was Tue, 12 Jun 2001 14:30:59 -0400 when Terry wrote: Same here .. getting dupes of some, but not all emails. Explanation is quite simple: the list-server does not generate an X-Reply-to header to itself in the mails. Many people hit reply (which goes to the original sender) and add the name of the listserver to the to: line. Then you get it twice. Paul -- What good is a ticket to the good life, if you can't find the entrance? http://nlpagan.net - Registered Linux User 174403 Linux Mandrake 7.2 - Sylpheed 0.4.66 ** http://www.care2.com - when you care **
Re: [newbie] Total System Lock-up with MD 7.2
Hi Civileme, Many thanks for your suggestions re my problem. I have removed my SB card from its PCI slot, started up again but no change still the same old problem. I also removed the Winmodem PCI card as well but also no change. All the PCI slots are now vacant leaving only the Video card in the AGP slot. So now onto your next suggestion. Will take me a while to carefully work my way through the Kernel update. Had a play with the ICeWM and really the same problem happens here too. A bit more info for you, I have win98 on hda (4Gb) and MD7.2 on hdb (2Gb) a little easier for me to partition this way. I also installed MD2 directly from the CDs using a boot-up floppy. In the BIOS I have PNP OS Installed = NO. I have MD8 available on two CDs, should I attempt this install, or should I resolve my problem first ??? Many thanks for your interest in my problem. Gordon Stewart Just for laughs, see if you can duplicate this behavior with the SB removed. It sounds like an overload on the PCI bus from what you have described. Also you might try updating with MandrakeFreq and then also installing kernel ?2.2.19 out of the security updates to have the most current software. Civileme QA Team
[newbie] deleting mbr - how do i start windows
Hi, I read something similar to this in other messages, but I don't know if the problem is exactly the same. Having done an fdisk /mbr, I now use Grub tu dual boot a Win/Linux machine. How will I load Windows after removing LM and Grub? TIA. -- Pablo Garcia-Duran
[newbie] RAM full
I'm using a Mandrake 7.2 on a Pentium 3 with 128MB RAM, on a newly installed system. I found it a bit slow and quite a bit of the programs - like KDE mediaplayer - won´t start up. I found out that with NO programs started from the desktop by me, the RAM is nearly full! I can see, that I'm running Apache, postgreQql and mySql . My question is, where do I turn these off from the startup procedure, so I have more RAM to use as user? I have installed the developer install, as I want to learn to program and use XEmacs. Thanks, Gunner
Re: [newbie] deleting mbr - how do i start windows
hi, not sure how you are using grub if you have done fdisk /mbr but if you remove linux then to boot windows all you have to is fdisk /mbr :-) assuming that you haven't messed with your windows partition, bascule On Tuesday 12 June 2001 9:48 pm, you wrote: Hi, I read something similar to this in other messages, but I don't know if the problem is exactly the same. Having done an fdisk /mbr, I now use Grub tu dual boot a Win/Linux machine. How will I load Windows after removing LM and Grub? TIA. -- Pablo Garcia-Duran
Re: [newbie] LimeWire Installation
hy! whatis the filename/link of the linux jre? i couldnt find it- i always ended up with a search result like solaris jre or linux develoment package(20mb!). thanks regards On Tue, 12 Jun 2001, Jose wrote: I am running Mandrake 8.0 and was having problems installing LimeWire. I found some instructions that enabled me to finally install and run LimeWire. First got to http://java.sun.com and download the Java Runtime Enviroment 1.3.1 for Linux. Then get LimeWireOther.zip from http://www.limewire.com/ finally as root run /usr/java/jre1.3.1/bin/java -classpath LimewireOther.zip install then just run the binary as /home/your_directory/LimeWire/LimeWire It worked for me and hopefully for everyone else. -- Jose [EMAIL PROTECTED]
[newbie] x won't start
I cannot start x. I am using Mandrake 7.2, and I have XFree86 3.36 and 4.01 both installed. The computer is an IBM ThinkPad 770z, and it has a Trident Cyber 9397/DVD graphics card. The monitor is 14.1 inches, and it should support 1024x768 resolution. Others using my model have reported success under XF86 3.36, and I have modified and tweaked my XFdrake file countless times. It still doesn`t work (the screen goes black when X tries to start), and I am getting desperate. I am a newbie and probably can`t use the computer for much else unless I have a desktop environment. I would greatly appreciate any help you can offer me. ___ Visit http://www.visto.com/info, your free web-based communications center. Visto.com. Life on the Dot.
Re: [newbie] x won't start
First go easy on the settings. Did you try running 640x480 and 256 colors first? To see if the actual setup will run? If that works, you can work your way up in the settings to where it will still work. Otherwise you should ask the others you mention, to show you how they did it. Paul I cannot start x. I am using Mandrake 7.2, and I have XFree86 3.36 and 4.01 both installed. The computer is an IBM ThinkPad 770z, and it has a Trident Cyber 9397/DVD graphics card. The monitor is 14.1 inches, and it should support 1024x768 resolution. Others using my model have reported success under XF86 3.36, and I have modified and tweaked my XFdrake file countless times. It still doesn`t work (the screen goes black when X tries to start), and I am getting desperate. I am a newbie and probably can`t use the computer for much else unless I have a desktop environment. I would greatly appreciate any help you can offer me. ___ Visit http://www.visto.com/info, your free web-based communications center. Visto.com. Life on the Dot.
RE: [newbie] error: failed dependencies
On Tuesday, June 12, 2001 7:25 AM, Michael Falzon [SMTP:[EMAIL PROTECTED]] wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 error: failed dependencies -BEGIN PGP SIGNATURE- Version: PGPfreeware 7.0.3 for non-commercial use http://www.pgp.com iQA/AwUBOyW1nx+m/6t6W/SaEQJTagCg+2PICONXT2uLAeTNmqfAsytAJZkAn3aB m51HjlIJk1XDO16Wn2NiNYot =WZ/w -END PGP SIGNATURE- Michael is using PGP 7xx. This is a fundamentally UNTRUSTWORTHY implementation of PGP because NSA, who now own PGP, decided not to release the source code. It is a fundamental maxim of computer security that there is no security through obscurity. This was one of the reasons that Phil Zimmerman, who invented PGP, left them - although he says that 7.0.3. is secure and was finished under his watch, we have only his word for it whereas if the source was available we could (if we were so minded) walk through the code and satisfy ourselves as to its integrity. For non-commercial use, there are 6xx releases of PGP with published source; or there's GPG.
[newbie] Network File Sharing
I have a question regarding NFS. After nearly 30 hours over two days and redoing the basic install of 7.2 on both of my machines, I have my two machines networked together and can ping each successfully. I installed the network utilities, nfs and portmap, and have edited my /etc/exports files to read: /usr *.localdomain /home *.localdomain I have also edited my /etc/fstab to include: john:/usr /fsys/john/usr NFS defaults john:/home /fsys/john/usr NFS defaults I did a /usr/sbin/rpc.nfsd to start the daemon I did a /etc/rc.d/init.d/portmap start Then I did a /etc/rc.d/init.d/nfs start (The last two commands were suggested by someone on the list, but were not in my books.) I checked the Mandrake site for a tutorial on NFS, but all there is is a basic networking tutorial, and how to do IP masquerading. The mounting proceedure is not working and I'm wondering if I'm missing something?? Thanks, Michael
Re: [newbie] Network File Sharing
are you exporting from just one machine to the other? the /etc/rc.d/init.d/nfs and /usr/sbin/rpc.nfsd are - i think - for serving from one machine to the 'receiving' machine, you need to have nfs-utils-clients on the other machine, i assume you have installed either or both of nfs-utils or nfs-utils-clients on the appropriate machines? have you tried to mount manually? 'mount -t nfs machine.domain:/path/on/other/machine /path/on/this/machine' also, in your fstab i notice that you have just 'john', assuming that is a machine name i wonder if you need to use a domain name as well or make sure you have aliases in your /etc/hosts file? bascule On Tuesday 12 June 2001 11:14 pm, you wrote: I have a question regarding NFS. After nearly 30 hours over two days and redoing the basic install of 7.2 on both of my machines, I have my two machines networked together and can ping each successfully. I installed the network utilities, nfs and portmap, and have edited my /etc/exports files to read: /usr *.localdomain /home *.localdomain I have also edited my /etc/fstab to include: john:/usr /fsys/john/usr NFS defaults john:/home /fsys/john/usr NFS defaults I did a /usr/sbin/rpc.nfsd to start the daemon I did a /etc/rc.d/init.d/portmap start Then I did a /etc/rc.d/init.d/nfs start (The last two commands were suggested by someone on the list, but were not in my books.) I checked the Mandrake site for a tutorial on NFS, but all there is is a basic networking tutorial, and how to do IP masquerading. The mounting proceedure is not working and I'm wondering if I'm missing something?? Thanks, Michael
Re: [newbie] Network File Sharing
On Tue, 12 Jun 2001, you wrote: are you exporting from just one machine to the other? the /etc/rc.d/init.d/nfs and /usr/sbin/rpc.nfsd are - i think - for serving from one machine to the 'receiving' machine, you need to have nfs-utils-clients on the other machine, i assume you have installed either or both of nfs-utils or nfs-utils-clients on the appropriate machines? I have installed all the utilities on both machines. I started /usr/sbin/rpc.nfsd and /etc/rc.d/init.d/nfs on the exporting machine. Do have to do something to start nfs-utils-clients on the receiving machine? Do all of these need to be working at all times? Can I use a simple script to start all of this automatically at boot? have you tried to mount manually? 'mount -t nfs machine.domain:/path/on/other/machine /path/on/this/machine' When I try to mount manually, I get: machine_name:/usr failed, reason given by server : Permission denied. also, in your fstab i notice that you have just 'john', assuming that is a machine name i wonder if you need to use a domain name as well or make sure you have aliases in your /etc/hosts file? /etc/hosts on machine one contains : 192.168.x.1x localhost.localdomain localhost 127.0.0.1 localhost 192.168.x.2x macine_two_name /etc/hosts on machine two contains : 192.168.X.2X localhost.localdomain 127.0.0.1 localhost 192..168.X.1X machine_one_name Does any of this help?? bascule On Tuesday 12 June 2001 11:14 pm, you wrote: I have a question regarding NFS. After nearly 30 hours over two days and redoing the basic install of 7.2 on both of my machines, I have my two machines networked together and can ping each successfully. I installed the network utilities, nfs and portmap, and have edited my /etc/exports files to read: /usr *.localdomain /home *.localdomain I have also edited my /etc/fstab to include: john:/usr /fsys/john/usr NFS defaults john:/home /fsys/john/usr NFS defaults I did a /usr/sbin/rpc.nfsd to start the daemon I did a /etc/rc.d/init.d/portmap start Then I did a /etc/rc.d/init.d/nfs start (The last two commands were suggested by someone on the list, but were not in my books.) I checked the Mandrake site for a tutorial on NFS, but all there is is a basic networking tutorial, and how to do IP masquerading. The mounting proceedure is not working and I'm wondering if I'm missing something?? Thanks, Michael
[newbie] Follow up on Different Printer Problem
Earlier I wrote a message concerning being unable to print more than one item. Another user suggested I post the contents of my /var/log/cups/error_log file, so here it is. I don't understand most of it, but it does seem that something is terminating when it shouldn't. Does anyone have any idea why I could only get one successful print and the others acted like nothing was in the spool? Thanks in advance! Wendell Gragg I [11/Jun/2001:06:33:59 -0600] Listening to 0:631 I [11/Jun/2001:06:33:59 -0600] Sending browsing info to d0b4ddff:631 I [11/Jun/2001:06:33:59 -0600] Sending browsing info to c0a800ff:631 I [11/Jun/2001:06:33:59 -0600] Configured for up to 100 clients. I [11/Jun/2001:06:34:08 -0600] LoadPPDs: Wrote /etc/cups/ppds.dat (1665 PPDs)... E [11/Jun/2001:06:58:00 -0600] Scheduler shutting down due to SIGTERM. I [11/Jun/2001:21:36:50 -0600] Listening to 0:631 I [11/Jun/2001:21:36:50 -0600] Sending browsing info to d0b4ddff:631 I [11/Jun/2001:21:36:50 -0600] Sending browsing info to c0a800ff:631 I [11/Jun/2001:21:36:50 -0600] Configured for up to 100 clients. I [11/Jun/2001:21:36:58 -0600] LoadPPDs: Wrote /etc/cups/ppds.dat (1665 PPDs)... I [11/Jun/2001:21:41:09 -0600] Job 4 queued on 'lp' by 'wendell'. I [11/Jun/2001:21:41:09 -0600] Started filter /usr/lib/cups/filter/pstops (PID 1876) for job 4. I [11/Jun/2001:21:41:09 -0600] Started filter /usr/lib/cups/filter/cupsomatic (PID 1877) for job 4. I [11/Jun/2001:21:41:09 -0600] Started backend /usr/lib/cups/backend/parallel (PID 1878) for job 4. I [11/Jun/2001:21:43:58 -0600] Job 5 queued on 'lp' by 'wendell'. I [11/Jun/2001:21:43:58 -0600] Started filter /usr/lib/cups/filter/pstops (PID 1886) for job 5. I [11/Jun/2001:21:43:58 -0600] Started filter /usr/lib/cups/filter/cupsomatic (PID 1887) for job 5. I [11/Jun/2001:21:43:58 -0600] Started backend /usr/lib/cups/backend/parallel (PID 1888) for job 5. E [11/Jun/2001:21:44:02 -0600] PID 1887 stopped with status 32! I [11/Jun/2001:21:45:16 -0600] Job 6 queued on 'lp' by 'wendell'. I [11/Jun/2001:21:45:16 -0600] Started filter /usr/lib/cups/filter/pstops (PID 1895) for job 6. I [11/Jun/2001:21:45:16 -0600] Started filter /usr/lib/cups/filter/cupsomatic (PID 1896) for job 6. I [11/Jun/2001:21:45:16 -0600] Started backend /usr/lib/cups/backend/parallel (PID 1897) for job 6. E [11/Jun/2001:21:45:20 -0600] PID 1896 stopped with status 32! I [11/Jun/2001:21:47:14 -0600] Job 7 queued on 'lp' by 'wendell'. I [11/Jun/2001:21:47:14 -0600] Started filter /usr/lib/cups/filter/pstops (PID 1908) for job 7. I [11/Jun/2001:21:47:14 -0600] Started filter /usr/lib/cups/filter/cupsomatic (PID 1909) for job 7. I [11/Jun/2001:21:47:14 -0600] Started backend /usr/lib/cups/backend/parallel (PID 1910) for job 7. E [11/Jun/2001:21:47:19 -0600] PID 1909 stopped with status 32! E [11/Jun/2001:21:53:33 -0600] Scheduler shutting down due to SIGTERM. I [11/Jun/2001:22:07:56 -0600] Listening to 0:631 I [11/Jun/2001:22:07:56 -0600] Sending browsing info to d0b4ddff:631 I [11/Jun/2001:22:07:56 -0600] Sending browsing info to c0a800ff:631 I [11/Jun/2001:22:07:56 -0600] Configured for up to 100 clients. I [11/Jun/2001:22:08:05 -0600] LoadPPDs: Wrote /etc/cups/ppds.dat (1665 PPDs)... E [11/Jun/2001:22:25:44 -0600] Scheduler shutting down due to SIGTERM. I [12/Jun/2001:18:29:33 -0600] Listening to 0:631 I [12/Jun/2001:18:29:33 -0600] Sending browsing info to d0b4ddff:631 I [12/Jun/2001:18:29:33 -0600] Sending browsing info to c0a800ff:631 I [12/Jun/2001:18:29:34 -0600] Configured for up to 100 clients. I [12/Jun/2001:18:29:41 -0600] LoadPPDs: Wrote /etc/cups/ppds.dat (1665 PPDs)... E [12/Jun/2001:18:29:45 -0600] SendBrowseList: sendto failed for browser 1 - Network is unreachable. E [12/Jun/2001:18:29:45 -0600] Browsing turned off. E [12/Jun/2001:18:33:36 -0600] Scheduler shutting down due to SIGTERM. I [12/Jun/2001:18:36:41 -0600] Listening to 0:631 I [12/Jun/2001:18:36:41 -0600] Sending browsing info to d0b4ddff:631 I [12/Jun/2001:18:36:41 -0600] Sending browsing info to c0a800ff:631 I [12/Jun/2001:18:36:41 -0600] Configured for up to 100 clients. I [12/Jun/2001:18:36:48 -0600] LoadPPDs: Wrote /etc/cups/ppds.dat (1665 PPDs)... E [12/Jun/2001:18:36:52 -0600] SendBrowseList: sendto failed for browser 1 - Network is unreachable. E [12/Jun/2001:18:36:52 -0600] Browsing turned off. E [12/Jun/2001:18:40:32 -0600] Scheduler shutting down due to SIGTERM. I [12/Jun/2001:22:13:29 -0600] Listening to 0:631 I [12/Jun/2001:22:13:29 -0600] Sending browsing info to d0b4ddff:631 I [12/Jun/2001:22:13:29 -0600] Sending browsing info to c0a800ff:631 I [12/Jun/2001:22:13:29 -0600] Configured for up to 100 clients. I [12/Jun/2001:22:13:39 -0600] LoadPPDs: Wrote /etc/cups/ppds.dat (1665 PPDs)... _ Get your FREE download of MSN Explorer at http://explorer.msn.com
[newbie] virtual / sendmail
Hi! I have some problem send an email to one's of my customer company email address. My customer is using SingNet.com.sg services. They are using a virtual-domain email account from SingNet. When I send email to my customer with To: and Cc: Only the To: user and the 1st Cc: user will received my email but not the others Cc: user. Form my MailLog show me all message was deliver with no error. Need HELP on Sendmail Best Regards, SKLIM
[newbie] m505 usb w/ LM 8
has anyone successfully set up the palm m505 on LM 8? If so can you give us some pointers? I haven't had much luck so far. I can't seem to find much on the web. Probably because the 505 is new. Much appreciated, -jp
Re: [newbie] identd
Thanks, that accually did not help me much but i did find on the Bastille web site referance to using InteractiveBastille from su and it gave me much better control over the setup than tiny firewall did. So you at least pointed me in the right direction and i thank you :-) Now all i have to do is figure out how to log this stuff. On June 12, 2001 12:26 am, you wrote: Dan ; The Tiny Firewall in LM 8.0 is actually Bastille-Firewall. In the /etc folder, you should find another folder called Bastille (/etc/Bastille) . Inside of that you should find bastille-firewall.cfg . Open that in Advanced Editor, and look around. It's as easy to modify as smb.conf , and has pretty good descriptions about all the stuff it does. Save the changes, and restart the firewall or (Gasp!) reboot ! Should work fine. -- Regards, Dan Gordon Powerd by KMail Registerd Linux user #217868
[newbie] ¡ ¡ ¡ Busco Fans de Otro Rollo ! ! ! Es una emergencia
Hola a todos, Primero que todo dejenme pedirles disculpas X escribir en esta lista hacerca de algo que no tiene nada que ver con lo de Linux. Lo que pasa es que esto es algo impotante. Yo soy un fan de Otro Rollo (el programa de Adal Ramones que pasa en Univision los sabados a las 12:00am) y al igual que muchos otros estamos pidiendo que lo pasen mas temprano y mas horas. Si hay alguien aqui que sea fan de Otro Rollo por favor ¡¡¡apoyanos!!! Yo hice una pagina donde explico lo que vamos a hacer y donde hice unas animaciones para poner en el Foro de Otro Rollo en Univision.com. O si no escribeme y te mando a decir de lo que se trata la Mision II: Otro Rollo Mas Temprano Y Mas Horas :-) ;-) ;-) Translation: Guys I am looking for support on having Otro Rollo (a spanish TV show) aired earlier and longer. I know this has nothing to do with Linux but I am looking for support everywhere. Please excuse me. If U want to know how all of us fans at Univision.com are going to launch Mision II: Otro Rollo Mas Tempran Y Mas Horas, visit the link below or tell me and I'll send you an e-mail withe the purpose. URL:http://www.geocities.com/tezcatlipoca_geo/fans.html or mail me to mailto:[EMAIL PROTECTED] Gracias, TezcatlipocA
Re: [newbie] Single Network Firewall
On Tuesday 12 June 2001 19:54, Florian wrote: On Monday 11 June 2001 22:33, Florian wrote: Did anyone try it? Im thinking of using it as a router for our company we have a lan with 10 pcs and a novell server (ouch) but since our ElsaLancom (never buy it) chrashes every 10 minutes i was wondering if Single Network Firewall firewall is an possibly easy to use alternative? If i did all the networks stuff by myself i would use a MDK8 version but since there are people taking care of the networking who dont have experience with linux i like the idea of boot a cd install boot and hop were up. Another question is if there are possibillities of putting ssh etc. servers on the Single Network Firewall? Do i expect too much ... little? Florian OK i did it finally a few impressions : At first i had slight problems cause i have a cable connection and two nics in the firewall machine one 3com (pci) it worked fine and got detected right away its the one wich goes to my cablemodem, the second nick (icl etherteam 16i ISA) did not get detected by SNF and since SNF doesnt include hardware configuration tools and i dint want to write the config files by hand (ough) and mess around with the modules (at 3 o clock in the night!) i cancelled the attempt and went to sleep zzz* . Next day ... went to my supplier bought a tulip pci and it worked like a charm right away using expert install finally it got both nics and i could (like in any other MDK system) configure everything at the install prozess one nick for lan with static ip and one for the modem with dhcpcd. Boot and hop . The interface from any browser looks smooth and is pretty detailed although the status for bastille firewall is marked as unknown but it is enabled and filters everything nicenice you can configure all your needs from this interface. At one place (i think it was secure login config) you need to have a java enabled browser ... (konqueror didnt work even with java) but all other options dont need any java so konqueror is just fine (actually it rules!!!) ill do some tests now to have a look if it does its job well (nmap will tell me =)) . My impression is that its rocksolid and will never need a reboot also the monitor you can leave away after instalation is complete . An ssh server is included . Now i need a little more docs to find out all extras (sure there are a lot) for example port forwarding to internal services such as ftp http etc. I can strongly recommend to replace your ElsaLancom or any other hardware router with this cute little linux software router !!! Cheers ps: since the interface is https:// based use a pc with atleast 150mhz cpu and a little bit more ram for SNF it will go smoother . Mine is just that kind of machine and i feel that i wouldn use slower cause the interface worx but is not the fastest actually weird if i connect with konqueror to the firewall i get a 7.5KB/sec (over LAN ) thats too slow must be a mandrake8 prob. cause with IE5 it goes a lot quicker ... and to connect with ssh to the firewall takes about 2 mins before it finally asks for a pass ... any ideas? Florian That is a resolution problem on the delay--a resolver has to give up looking for nameservices to allow things to go through. And remember it is https and we all know how great the security is for IE5. Https sacrifices speed for security. There are also some interesting squid options, like putting popup ads into 1-pixel transparencies or just plain blocking things like doubleclick.net. Civileme
[newbie] Bash scripts portability
Dear List, I wonder if someone can offer assistance. One of my hobbies at school is to write bashscripts for our two proxy servers. I usually write them on my home network, which runs Suse 7.0. Our two proxy servers also run SuSE Linux 7.0. The problem I am having is that when I take a bash script from home (which works), and try and run it on the proxy server, I either get one of the following error messages: bash: /usr/bin/script : not found bash: /usr/bin/script Line X command not found (Line X being the last line in the script which is blank) Does anybody know why, or indeed what causes this, and if so, how do I correct it. Thanks in Anticipation, Regards, Thomas Adam Please note that the content of this message is confidential between the original sender and the intended recipient(s) of the message. If you are not an intended recipient and/or have received this message in error, kindly disregard the content of the message and return it to the original sender. If you have any complaints about this message please reply to: [EMAIL PROTECTED] The Purbeck School E-Mail server running: users.purbeck.dorset.sch.uk
Re: [newbie] DHCP, router and Realtek 8139
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Have you verified that dhcpcd is installed? Use 'locate dhcpcd', and you should find it in /sbin (along with several other hits, but the actual executable is in the above directory). If it is not installed, just install it, then re-run the network configurator in Mandrake's Control Center. If it is installed, then try disabling dhcp and giving yourself a static IP. Can you reach the network after that? If not, then your problem is somewhere else. If yes, then you might have a dhcp problem. Just some troubleshooting tips, hope they help. Dave On Tuesday 12 June 2001 06:57, thus spake Ralph Brown: I am writing this request for help after much frustration and no progress. I am trying to bring my new Mandrake 8 box up on my network, via DHCP. Network = 6 windows nodes, 1 linux, 1 SMC Barracade router (DHCP), 1 hub, and 1 Speedstream 5260 DSL external modem. All of the windows nodes can see each other and have internet access. When I installed M8, I selected the DHCP option, and rebooted. I noticed that I had a green light on the router where M8 was plugged into. Then, as the boot process progressed, and eth0 was being brought up, the green light went out, and the screen message was something like unable to determine ip address. Ifconfig only shows 127.0.0.1, not eth0 When I check hardware in Manadrake control center, my Realtek 8139 card shows up correctly. Using the internet config tool, I walk through it, and point to the ip# of the router, and see my NIC, but still can't connect to the network??? Any suggestions, howto's, etc Thanks in advance - -- Nihil tam munitum quod non expugnari pecunia possit. (No fortification is such that it cannot be subdued with money. - - Marcus Tullius Cicero, 106-43 B.C. -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE7JhXROiMJhTaLf3MRAgsQAJ4omrt1fcSyt9/pGPphPLb0Y2LUKwCgmNw8 mi9dFZNFEFRSKUEKAZIbveg= =QgD8 -END PGP SIGNATURE-
[newbie] OT: Sun hardware question
I just got sent the email below from our SUN team at work, me not knowing anything about sun hardware, was just wondering if anyone knew if any of this kit could be of some use? It would be used basically for playing around with. cheers Jamie -- The ISS has a number of obsolete SUN workstations and servers to dispose of over the next few weeks. The items are: 8 Sparcstation IPC workstations 7 Sparcstation LX workstations 4 SparcClassic workstations The above have 17 SUN-type monitors(13W3 not VGA), mostly 200M or 400M SCSI disk, and 24M of RAM. They should be able to run a small installation of Solaris or SparcLinux (slowly!) 2 SparcServer670MP Servers Unknown spec, about 1.5' wide, 2.5' deep and 2.5' high. Quite heavy. 3 Mass Storage disk units. Unknown disk sizes. Same dimensions as above. Very heavy. _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Re: [newbie] device /usr busy? SAY WHAT?
Hey group I just got some weird errors when I went to either shut down or reboot the server. It said something like /usr was busy and it retried to umount again approx 3 or 4 times, has anyone else had this error and know how to correct it so on bootup it does not have to do a fsck of the usr ? Did that start to happen after upgrading to a new version? I had that happen when I upped 7.1 to 7.2. In the end I had to reformat /usr and install again to get rid of the problem. But what caused it... still don't know. Paul
Re: [newbie] hdparm
On Tuesday 12 June 2001 16:50, Scott Pletcher wrote: Hi All, I've got some troublesome readings from two identical hard drives set up the same. Does anyone know why they are performing so differently? I suppose hda may be bad, but I was hoping to find some other way to test this. Thanks! Scott THE DATA Here are the hard drives: hda: Maxtor 52049H4, ATA DISK drive (master ide0) hdb: Maxtor 52049H4, ATA DISK drive (slave ide0) Running hdparm I get: [root@haldane scott]# hdparm -Tt /dev/hda /dev/hda: Timing buffer-cache reads: 128 MB in 0.87 seconds =147.13 MB/sec Timing buffered disk reads: 64 MB in 31.17 seconds = 2.05 MB/sec [root@haldane scott]# hdparm -Tt /dev/hdb /dev/hdb: Timing buffer-cache reads: 128 MB in 0.85 seconds =150.59 MB/sec Timing buffered disk reads: 64 MB in 2.21 seconds = 28.96 MB/sec [root@haldane scott]# hdparm /dev/hda Here are the settings: /dev/hda: multcount= 16 (on) I/O support = 3 (32-bit w/sync) unmaskirq= 0 (off) using_dma= 1 (on) keepsettings = 0 (off) nowerr = 0 (off) readonly = 0 (off) readahead= 8 (on) geometry = 2482/255/63, sectors = 39882528, start = 0 [root@haldane scott]# hdparm /dev/hdb /dev/hdb: multcount= 16 (on) I/O support = 3 (32-bit w/sync) unmaskirq= 0 (off) using_dma= 1 (on) keepsettings = 0 (off) nowerr = 0 (off) readonly = 0 (off) readahead= 8 (on) geometry = 2491/255/63, sectors = 40020624, start = 0 if you are running 8.0, you might try this http://perso.mandrakesoft.com/~civileme/drakopt download the file drivedb2 and place it at /.drivedb download the file drakopt2 and put it anywhere Open a terminal log in to the directory where you downloaded drakopt2 type ./drakopt2 When it completes, your drives should be tuned. Drive hda seems to have a higher count of bad sectors from the factory, but draw no conclusions til you try drakopt. hdparm to have meaning should be run three times in a row without other programs perking along. The capital T on the test need not be used since it simply measures the bandwidth of your memory buffer. Civileme
[newbie] How are the dirs. structured?
Hey all, I'm coming from a DOS (since version 4.0) and Windows (no biggie.. I got KDE if I need it :)) environment, and I'm not totally sure how the directory structure is laid out? What are the DOS equivelants (if any) of the /etc/ /usr/ etc.. directories? Where do files that I compile and install should go? Is there a progra~1 type directory? I just have a wierd fetish with keeping everyone on my hard drive organized, and don't want to go about and have stuff where things shouldn't go in Linux. Also.. for a download dir.. should it be /usr/download ? Thanks for the help! If you want to point me to a HOWTO.. I'd be more than happy to read it. Thanks again, Leif Madsen City Centre Liquidations Phone: 519-652-6566 ext 244 Fax : 519-652-6606 [EMAIL PROTECTED]
[newbie] sym link error? - too many levels
i get the error 'too many levels of symbolic links' after trying to cd to a symlink i made to a directory and i'm sure the error can't mean what it appears to mean, my directory structure is: /stuff/ftpsite/linux/../i586/ and i made a symlink to the aformentioned /i586 directory named /stuff/i586 so as to save me time, but when i cd to /stuff/i586 i get the above error /stuff is a top level mount point of a partition the command i used was [root@sherlock /stuff]#ln -s /stuff/ftpsite//i586 /stuff/i586 what have i done wrong? bascule
Re: [newbie] error: failed dependencies:
Michael Falzon, First, please try not to post htmlized e-mails to the list. Some e-mail clients add all kinds of extra html tags, reduce the size of the font such that it is unreadable, or change the color to a grayish color, making it much more difficult to read. Looks like at the very least, you are going to have to get perl-base that is at least 5.601-1, then try a 'rpm -Uvh perl-*.i586.rpm' (without the quotes). If that still doesn't work, you can try 'rpm -Uvh --force perl-*.i586.rpm' (without the quotes). Michael V. -- Michael Viron Senior Systems Administration Consultant Web Spinners, University of West Florida At 04:49 PM 06/12/2001 +1000, Michael Falzon wrote: Let's retry that I'm trying to update peal how do i fix this ? [root@gw /]# rpm -Uvh perl-5.601-1mdk.i586.rpm error: failed dependencies: perl-base is needed by perl-5.601-1mdk perl-base = 5.601-1mdk is needed by perl-5.601-1mdk /usr/bin/perl is needed by autoconf-2.14.1-6mdk /usr/bin/perl is needed by automake-1.4-6mdk /usr/bin/perl is needed by apache-1.3.9-8mdk /usr/bin/perl is needed by cbb-0.78-2mdk /usr/bin/perl is needed by cleanfeed-0.95.7b-4mdk /usr/bin/perl is needed by cvs-1.10.7-1mdk /usr/bin/perl is needed by fvwm2-2.2.2-9mdk /usr/bin/perl is needed by groff-1.11a-10mdk /usr/bin/perl is needed by helptool-2.4-8mdk /usr/bin/perl is needed by kdebase-1.1.2-9mdk /usr/bin/perl is needed by kdemultimedia-1.1.2-3mdk /usr/bin/perl is needed by kdenetwork-1.1.2-5mdk /usr/bin/perl is needed by kernel-source-2.2.13-7mdk /usr/bin/perl is needed by korganizer-1.1.1final-2mdk /usr/bin/perl is needed by lilo-0.21-12mdk /usr/bin/perl is needed by mgetty-sendfax-1.1.14-9mdk /usr/bin/perl is needed by ncurses-devel-5.0_990703-4mdk /usr/bin/perl is needed by pilot-link-0.9.0-9mdk /usr/bin/perl is needed by postgresql-6.5.1-7mdk /usr/bin/perl is needed by rpm-3.0.3-31mdk /usr/bin/perl is needed by samba-2.0.5a-3mdk /usr/bin/perl is needed by sharutils-4.2-5mdk /usr/bin/perl is needed by svgalib-1.4.0-10mdk /usr/bin/perl is needed by ucd-snmp-3.6.2-1mdk /usr/bin/perl is needed by ucd-snmp-utils-3.6.2-1mdk /usr/bin/perl is needed by uucp-1.06.1-12mdk /usr/bin/perl is needed by vim-common-5.4-3mdk /usr/bin/perl is needed by WindowMaker-0.60.0-6mdk /usr/bin/perl is needed by xboard-4.0.0-4mdk /usr/bin/perl is needed by mod_perl-1.21-16mdk /usr/bin/perl is needed by mod_perl-1.21-17mdk /usr/bin/perl is needed by tetex-doc-1.0.6-4mdk /usr/bin/perl is needed by procinfo-16-4mdk /usr/bin/perl is needed by apache-devel-1.3.9-8mdk /usr/bin/perl is needed by emumail-modules-4.5-4 /usr/bin/perl is needed by emumail-4.5-6 /usr/bin/perl is needed by ircd-2.10.3-5mdk /usr/bin/perl is needed by inn-2.2.3-1.3mdk /usr/bin/perl is needed by mc-4.5.38-4.1mdk /usr/bin/perl is needed by initscripts-4.23-35mdk /usr/bin/perl is needed by curl-7.7-1 /usr/bin/perl is needed by wu-ftpd-2.6.1-8.6mdk /usr/bin/perl is needed by MySQL-client-3.22.25-4mdk /usr/bin/perl is needed by MySQL-3.22.25-4mdk /usr/bin/perl is needed by sgml-tools-1.0.9-3.1mdk /usr/bin/perl is needed by webmin-0.86-1 /usr/bin/perl5 is needed by xscreensaver-3.17-6mdkMichael Falzon Gremlin Consultancy P/L 405 Francis Street Brooklyn, Vic Australia 3025 Ph: 61+ 393153855 Fax: 61+393151585 mobile: 0419235363 Registered Linux user #204397
[newbie] Sound Problem, cs4281 on LM7.2
I there. I have a Notebook Toshiba 1700-500 and I can't put my sound to work. I've tried do compile the kernel, with cs4281, bus it gives an error during startup... Can someone help me please? Thanks a lot! Fred
Re: [newbie] Duplicate emails from list
Same here .. getting dupes of some, but not all emails. On Tuesday 12 June 2001 12:52, you wrote: On Monday 11 June 2001 23:21, Fireman71 wrote: Am I the only one receiving two copies of each email sent to the list? Tried unsubscribing and resubscribing right after this started but it keeps sending me two. Been going on for about a week now. Ian I get duplicates of some, but not all, e-mails sent to the list. -- Terry Sheltra PC Technician / Asst. Network Administrator University of Virginia School of Architecture (804 or 434) 982-3047 [EMAIL PROTECTED] Registered Linux User #218330
Re: [newbie] Small script for my signature
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 The 'uptime' command will give you the information you want. Just put it in a script, and create a cron job to run it every 24 hours (or better yet, every hour). Dave On Tuesday 12 June 2001 14:01, thus spake Leif Madsen: Hey all, I'm looking for a script that I can use to output a signature for me. It's easy enough to have KMail use a file for the signature, so that is fine. What I'm looking for is a script or program to make a new signature every 24 hours. What I want to do is add something like this: Linux Mandrake running stable for 'X' number of days without reboot! or something to that affect. Any ideas? Thanks, Leif Madsen City Centre Liquidations Phone: 519-652-6566 ext 244 Fax : 519-652-6606 [EMAIL PROTECTED] - -- Nihil tam munitum quod non expugnari pecunia possit. (No fortification is such that it cannot be subdued with money. - - Marcus Tullius Cicero, 106-43 B.C. -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE7Jm9LOiMJhTaLf3MRAjW/AJ9zKR0Ngwsb7nI1AEVNjvlCen4QqwCggkmn 1Q6I/G1LYrK1mD40qPcOZ0E= =h7ka -END PGP SIGNATURE-