Re: [newbie] CD-RW will nolonger write. Help
Have a look at http://www.mandrakeuser.org/hardware/hremov3.html. Make sure your drive's setup fits the CD-RW setup here. On Fri, 22 Dec 2000 16:37, Jon Doe wrote: On Thursday 21 December 2000 11:50 pm, you wrote: On Thursday 21 December 2000 09:33 pm, you wrote: First check your /etc/fstab to see if your CD-RW is mounted at boot. Also, have you tried burning as root? By default, you can only burn in root mode. Yes I have tried burning as root. The CD-RW works as a normal CD-Rom just fine. CD-RW is supermount in fstab Here is the error I get from cdrecord. Pisses me off too cause it keeps fixating the cd leaving it useless. [root@localhost jon]# cdrecord -v dev=/dev/sgc speed=4 /home/track-01.iso Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling TOC Type: 1 = CD-ROM scsidev: '/dev/sgc' devname: '/dev/sgc' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 2.1.39 Using libscg version 'schily-0.1' atapi: 1 Device type: Removable CD-ROM Version: 0 Response Format: 1 Vendor_info: 'IDE-CD ' Identifikation : 'R/RW 4x4x24 ' Revision : '1.04' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO Drive buf size : 1572864 = 1536 KB FIFO size : 4194304 = 4096 KB Track 01: data 451 MB Total size: 518 MB (51:20.64) = 231048 sectors Lout start: 518 MB (51:22/48) = 231048 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Is not unrestricted Is not erasable Disk sub type: Medium Type C, low Beta category (C-) (6) ATIP start of lead in: -11640 (97:26/60) ATIP start of lead out: 337350 (75:00/00) Disk type:Long strategy type (Cyanine, AZO or similar) Manuf. index: 3 Manufacturer: CMC Magnetics Corporation Blocks total: 337350 Blocks current: 337350 Blocks remaining: 106302 RBlocks total: 349030 RBlocks current: 349030 RBlocks remaining: 117982 Starting to write CD/DVD at speed 4 in write mode for single session. Last chance to quit, starting real write in 1 seconds. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... Starting new track at sector: 0 Track 01: 1 of 451 MB written (fifo 100%).cdrecord: Input/output error. write_ g1: scsi sendcmd: retryable error CDB: 2A 00 00 00 03 E0 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: F0 00 05 00 00 03 E0 13 00 00 00 00 63 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x63 Qual 0x00 (end of user area encountered on this track) Fru 0x0 Sense flags: Blk 992 (valid) write track data: error after 2031616 bytes Sense Bytes: 70 00 00 00 00 00 00 13 00 00 00 00 00 00 00 00 00 00 Writing time: 16.613s -- Sridhar Dhanapalan. Your mouse has moved. Windows must be rebooted to acknowledge this change.
Re[2]: [newbie] CD-RW will nolonger write. Help
Hello Steven, Friday, December 22, 2000, 2:55:29 PM, you wrote: SD did you recently upgrade cdrecord? I seem to recall a friend of mine SD having trouble after upgrading cdrecord. SD steve d... Well probably, I upgraded from 7.1 to 7.2 and the CD-RW was working just fine in 7.1 hasn't worked yet in 7.2
Re: [newbie] CD-RW will nolonger write. Help
On Thursday 21 December 2000 05:33 pm, you wrote: Ok, I am soo tired of trying to figure it out myslef its not even funny. So I'll ask all the experts on this list. My CD-RW worked just fine in LM 7.1 now in 7.2 it won't work. I went to the mandrake site and did the link fix thing but it will still just not right. I have tried every piece of GUI software I have and all of them puke out and do nothing. I am sure its probably just something really simple I just don't know what it would be. Still too new at linux to figure it out. And it does work in winblows so I know its not the CD-RW I don't know what will be needed so here is some random stuff Cdrecord -scanbus Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling Linux sg driver version: 2.1.39 Using libscg version 'schily-0.1' scsibus0: 0,0,0 0) * 0,1,0 1) * 0,2,0 2) * 0,3,0 3) * 0,4,0 4) * 0,5,0 5) * 0,6,0 6) 'IOMEGA ' 'ZIP 100 PLUS' 'J.66' Removable Disk 0,7,0 7) * scsibus1: 1,0,0 100) 'COMPAQ ' 'LS-120 VER5 AB' 'F515' Removable Disk 1,1,0 101) 'IDE-CD ' 'R/RW 4x4x24 ' '1.04' Removable CD-ROM 1,2,0 102) * 1,3,0 103) * 1,4,0 104) * 1,5,0 105) * 1,6,0 106) * 1,7,0 107) * At least you can get scanbus to give you a read out all I get is no such file try "cdrecord -scanbus" which is what I had just done? Something is whacked from my download, I'm sure of it now, cause I can't remember for sure but I thing the second disk was d/l'd using EI explorer, don't do that, it screws things up. Need to use netscape if you can. -- Dennis Myers registered linux user #180842
Re: [newbie] CD-RW will nolonger write. Help
First check your /etc/fstab to see if your CD-RW is mounted at boot. Also, have you tried burning as root? By default, you can only burn in root mode. On Fri, 22 Dec 2000 10:33, Jon Doe wrote: Ok, I am soo tired of trying to figure it out myslef its not even funny. So I'll ask all the experts on this list. My CD-RW worked just fine in LM 7.1 now in 7.2 it won't work. I went to the mandrake site and did the link fix thing but it will still just not right. I have tried every piece of GUI software I have and all of them puke out and do nothing. I am sure its probably just something really simple I just don't know what it would be. Still too new at linux to figure it out. And it does work in winblows so I know its not the CD-RW I don't know what will be needed so here is some random stuff Cdrecord -scanbus Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling Linux sg driver version: 2.1.39 Using libscg version 'schily-0.1' scsibus0: 0,0,0 0) * 0,1,0 1) * 0,2,0 2) * 0,3,0 3) * 0,4,0 4) * 0,5,0 5) * 0,6,0 6) 'IOMEGA ' 'ZIP 100 PLUS' 'J.66' Removable Disk 0,7,0 7) * scsibus1: 1,0,0 100) 'COMPAQ ' 'LS-120 VER5 AB' 'F515' Removable Disk 1,1,0 101) 'IDE-CD ' 'R/RW 4x4x24 ' '1.04' Removable CD-ROM 1,2,0 102) * 1,3,0 103) * 1,4,0 104) * 1,5,0 105) * 1,6,0 106) * 1,7,0 107) * -- Sridhar Dhanapalan. Your mouse has moved. Windows must be rebooted to acknowledge this change.
Re: [newbie] CD-RW will nolonger write. Help
On Thursday 21 December 2000 11:50 pm, you wrote: On Thursday 21 December 2000 09:33 pm, you wrote: First check your /etc/fstab to see if your CD-RW is mounted at boot. Also, have you tried burning as root? By default, you can only burn in root mode. Yes I have tried burning as root. The CD-RW works as a normal CD-Rom just fine. CD-RW is supermount in fstab Here is the error I get from cdrecord. Pisses me off too cause it keeps fixating the cd leaving it useless. [root@localhost jon]# cdrecord -v dev=/dev/sgc speed=4 /home/track-01.iso Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling TOC Type: 1 = CD-ROM scsidev: '/dev/sgc' devname: '/dev/sgc' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 2.1.39 Using libscg version 'schily-0.1' atapi: 1 Device type: Removable CD-ROM Version: 0 Response Format: 1 Vendor_info: 'IDE-CD ' Identifikation : 'R/RW 4x4x24 ' Revision : '1.04' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO Drive buf size : 1572864 = 1536 KB FIFO size : 4194304 = 4096 KB Track 01: data 451 MB Total size: 518 MB (51:20.64) = 231048 sectors Lout start: 518 MB (51:22/48) = 231048 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Is not unrestricted Is not erasable Disk sub type: Medium Type C, low Beta category (C-) (6) ATIP start of lead in: -11640 (97:26/60) ATIP start of lead out: 337350 (75:00/00) Disk type:Long strategy type (Cyanine, AZO or similar) Manuf. index: 3 Manufacturer: CMC Magnetics Corporation Blocks total: 337350 Blocks current: 337350 Blocks remaining: 106302 RBlocks total: 349030 RBlocks current: 349030 RBlocks remaining: 117982 Starting to write CD/DVD at speed 4 in write mode for single session. Last chance to quit, starting real write in 1 seconds. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... Starting new track at sector: 0 Track 01: 1 of 451 MB written (fifo 100%).cdrecord: Input/output error. write_ g1: scsi sendcmd: retryable error CDB: 2A 00 00 00 03 E0 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: F0 00 05 00 00 03 E0 13 00 00 00 00 63 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x63 Qual 0x00 (end of user area encountered on this track) Fru 0x0 Sense flags: Blk 992 (valid) write track data: error after 2031616 bytes Sense Bytes: 70 00 00 00 00 00 00 13 00 00 00 00 00 00 00 00 00 00 Writing time: 16.613s
