Re: [newbie] Connecting to ISP Problems - Round 2
Tom Berger wrote: On 08-Mar-2000 rassoc wrote: Tom Berger wrote: On 07-Mar-2000 rassoc wrote: Guess I was lucky because I had very little trouble getting my modem to work with 7.0 but my luck ran out when I tried to connect to my ISP. I'm using pppd. My ISP's tech support supplied all the setup parameters needed but that is as far as they would help. When I called to ask for help with this question I was told that I could use LINUX if I "had to" but they would not support it in any way. I connect, I logon to the network and then the error message pops up stating that... "The ppd daemon died unexpectedly!". The log file lists: pppd 2.3.10 started by root uid0 using interface ppp0 connect ppp0 --- /dev/cua1 lcp: timeout sending config-requests "The remote system does not seem to answer to configuration request. Contact your provider." Any suggestions? Thanks!!! Lori Rothermel Add noauth to /etc/ppp/options If you are using kppp, enter this in the 'pppd' options field (since kppp doesn't read 'options') Regards tom Tom, I added the "noauth" to /etc/ppp/options and in pppd's Accounts Arguments. I also changed the modem speed to 38400 just to be safe. I get: Modem Ready... Dialing ... Connecting To ... Logging on to Network ... Up pops the Error Box stating "The pppd Daemon Died Unexpectedly!" The PPP Log is: pppd 2.3.10 Started by root, uid0 Using Interface ppp0 Connect ppp0 -- /dev/cua1 Chap Authentication Failed Connection Terminated. Exit. kppp's Diagnosis is "Check that you supplied the correct username and password." I did and they are both correct. Did I enter the "noauth" in the wrong place? Again, thanks! Lori Rothermel No, that's a different thing ;-). 'noauth' doesn't require the server of your ISP to authenticate itself (most servers won't). CHAP (and PAP) are for the authentication of *your* machine to the server. In kppp, go to your account entry, mark it and click edit. There is a field 'authentication'. To which value is this field set? Try to set it either to PAP or to CHAP and try connecting with each setting. (Try PAP first) tom Tom, When I used PAP, I ended up with the following entries in the PPP log: pppd 2.3.10 started by root, uid 0 using interface ppp0 connect ppp0 -- /dev/cua1 pap authentication failed --- another attempt --- lcp timeout sending config-requests connection terminated exit Diagnosis: The remote system does not seem to answer to configuration request! Contact your provider! With CHAP: pppd 2.3.10 started by root, uid 0 using interface ppp0 connect ppp0 -- /dev/cua1 chap authentication failed --- another attempt --- lcp terminated by peer connection terminated exit Diagnosis: Check that you supplied the correct username and password. I know that my username and password are correct as I use them to access the net using one of our Win98 boxes. I even tried terminal-based. But after entering the username and password I got the error message that it was "Incorrect Service Type - Username/Password Incorrect". On several attempts, when the terminal window opened up, the prompts for username and password never occurred and I the ppp log recorded that the "serial line is looped back... connection terminated." And on other attempts when the terminal window opened up, unreadable (garbage) flew across the terminal screen and ppp log. Any suggestions? Thanks! Lori
[newbie] Connecting to ISP Problems
Guess I was lucky because I had very little trouble getting my modem to work with 7.0 but my luck ran out when I tried to connect to my ISP. I'm using pppd. My ISP's tech support supplied all the setup parameters needed but that is as far as they would help. When I called to ask for help with this question I was told that I could use LINUX if I "had to" but they would not support it in any way. I connect, I logon to the network and then the error message pops up stating that... "The ppd daemon died unexpectedly!". The log file lists: pppd 2.3.10 started by root uid0 using interface ppp0 connect ppp0 --- /dev/cua1 lcp: timeout sending config-requests "The remote system does not seem to answer to configuration request. Contact your provider." Any suggestions? Thanks!!! Lori Rothermel
[newbie] Connecting to ISP Problems - Round 2
Tom Berger wrote: On 07-Mar-2000 rassoc wrote: Guess I was lucky because I had very little trouble getting my modem to work with 7.0 but my luck ran out when I tried to connect to my ISP. I'm using pppd. My ISP's tech support supplied all the setup parameters needed but that is as far as they would help. When I called to ask for help with this question I was told that I could use LINUX if I "had to" but they would not support it in any way. I connect, I logon to the network and then the error message pops up stating that... "The ppd daemon died unexpectedly!". The log file lists: pppd 2.3.10 started by root uid0 using interface ppp0 connect ppp0 --- /dev/cua1 lcp: timeout sending config-requests "The remote system does not seem to answer to configuration request. Contact your provider." Any suggestions? Thanks!!! Lori Rothermel Add noauth to /etc/ppp/options If you are using kppp, enter this in the 'pppd' options field (since kppp doesn't read 'options') Regards tom Tom, I added the "noauth" to /etc/ppp/options and in pppd's Accounts Arguments. I also changed the modem speed to 38400 just to be safe. I get: Modem Ready... Dialing ... Connecting To ... Logging on to Network ... Up pops the Error Box stating "The pppd Daemon Died Unexpectedly!" The PPP Log is: pppd 2.3.10 Started by root, uid0 Using Interface ppp0 Connect ppp0 -- /dev/cua1 Chap Authentication Failed Connection Terminated. Exit. kppp's Diagnosis is "Check that you supplied the correct username and password." I did and they are both correct. Did I enter the "noauth" in the wrong place? Again, thanks! Lori Rothermel
RE: [newbie] Connecting to ISP Problems
On 07-Mar-2000 rassoc wrote: Guess I was lucky because I had very little trouble getting my modem to work with 7.0 but my luck ran out when I tried to connect to my ISP. I'm using pppd. My ISP's tech support supplied all the setup parameters needed but that is as far as they would help. When I called to ask for help with this question I was told that I could use LINUX if I "had to" but they would not support it in any way. I connect, I logon to the network and then the error message pops up stating that... "The ppd daemon died unexpectedly!". The log file lists: pppd 2.3.10 started by root uid0 using interface ppp0 connect ppp0 --- /dev/cua1 lcp: timeout sending config-requests "The remote system does not seem to answer to configuration request. Contact your provider." Any suggestions? Thanks!!! Lori Rothermel Add noauth to /etc/ppp/options If you are using kppp, enter this in the 'pppd' options field (since kppp doesn't read 'options') Regards tom -- "No fun, no gain" Thomas 'tom' Berger, [EMAIL PROTECTED] (home), [EMAIL PROTECTED] (work) http://www.mandrakeuser.org, [EMAIL PROTECTED]
