Re: [newbie] PCMCIA Card Question
Originally to: All This is a MIME-formatted message. If you see this text it means that your E-mail software does not support MIME-formatted messages. --=_tcob1.net-7191-1008635563-0001-2 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 7bit Thank you. Unfortunately, none of these are listed either, at least not from the command center. At least I know about etc/pcmcia/config now. Mark Pearson - Original Message - From: Joan Tur [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Monday, December 17, 2001 1:42 AM Subject: Re: [newbie] PCMCIA Card Question Es Dilluns 17 Desembre 2001 01:12, en Shadow va escriure: I'm attempting to install Linux for the first time ever. I'm installing Mandrake 8.1 on a Dell C600 laptop. The problem I'm currently running into concerns my PCMCIA Card. I have a Linksys PCMPC100 ethernet card. I'm using the Gnome desktop and when I go into Mandrake control center and attempt to configure my network card, it detects the card and then presents me with a list of drivers, asking which Net Driver to use. I've checked several websites and have found that I should use axnet_cs as the driver. Unfortunately, that driver is not listed in the table the command center is presenting to me. /etc/pcmcia/config shows that your card is shown as: Linksys Etherfast 10/100 Fast Ethernet or Linksys Etherfast PCMPC100 V3 Fast Ethernet You should try these. If it doesn't work the following cards use axnet_cs driver: -Asix AX88190 Fast Ethernet -Ambicom AMB8110 Fast Ethernet etc. To try more look for axnet_cs string in /etc/pcmcia/config Hope that helps... ;) -- Joan Tur. Ibiza - Spain Yahoo AOL quini2k ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com --=_tcob1.net-7191-1008635563-0001-2 Content-Type: text/plain; name=message.footer; charset=iso-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename=message.footer X-Mime-Autoconverted: from 8bit to 7bit by courier 0.36.1 - Gateway Information. This message originated from a Fidonet System (http://www.fidonet.org) and was gated at TCOB1 (http://www.tcob1.net) Please do not respond direct to this message but via the list Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] PCMCIA Card Question
Are you sure it has not already been autodetected. With my 3com PCMCIA card in my laptop Control Centre does not list my driver either, but yet the card still works. Running the Configure wizard does the same as in your case. It offers me a list which does not include the driver I know it needs. If I try to select one of the other 3com drivers, they will not load. If I look at the adapter section in netconf, once again it shows no driver loaded. The drop down list does not even offer the driver I know I need. Yet the card works perfectly. However if I look at the hardware section in Control Centre (HardDrake) I can see my Network Card, with the correct driver listed. Personally I find netconf a much better way if setting up my LAN connection than Control Centre (ConfigurationNetworkingNetconf) derek On Monday 17 December 2001 00:12, you wrote: Hello list, I'm attempting to install Linux for the first time ever. I'm installing Mandrake 8.1 on a Dell C600 laptop. The problem I'm currently running into concerns my PCMCIA Card. I have a Linksys PCMPC100 ethernet card. I'm using the Gnome desktop and when I go into Mandrake control center and attempt to configure my network card, it detects the card and then presents me with a list of drivers, asking which Net Driver to use. I've checked several websites and have found that I should use axnet_cs as the driver. Unfortunately, that driver is not listed in the table the command center is presenting to me. I'm sure there is a way to do this using the command line, but I'm ignorant of how. If there is a HowTo or other online documentation that someone could point me toward that would be great as well, but I have been unable to find the right one on my own. Mark Pearson. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] PCMCIA Card Question
Es Dilluns 17 Desembre 2001 01:12, en Shadow va escriure: I'm attempting to install Linux for the first time ever. I'm installing Mandrake 8.1 on a Dell C600 laptop. The problem I'm currently running into concerns my PCMCIA Card. I have a Linksys PCMPC100 ethernet card. I'm using the Gnome desktop and when I go into Mandrake control center and attempt to configure my network card, it detects the card and then presents me with a list of drivers, asking which Net Driver to use. I've checked several websites and have found that I should use axnet_cs as the driver. Unfortunately, that driver is not listed in the table the command center is presenting to me. /etc/pcmcia/config shows that your card is shown as: Linksys Etherfast 10/100 Fast Ethernet or Linksys Etherfast PCMPC100 V3 Fast Ethernet You should try these. If it doesn't work the following cards use axnet_cs driver: -Asix AX88190 Fast Ethernet -Ambicom AMB8110 Fast Ethernet etc. To try more look for axnet_cs string in /etc/pcmcia/config Hope that helps... ;) -- Joan Tur. Ibiza - Spain Yahoo AOL quini2k ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] pcmcia card adapters
i am having problems getting my isa to pcmcia adapter card to work any ideas??? james massardo
Re: [newbie] PCMCIA CARD
Not that I would buy one (thanks very much for the warning) but do they give you your money back if you did buy one by mistake? If not I would sue their butts. On Wed, 24 May 2000, Jay Latham wrote: I'm sorry to hear that you got suckered into buying a linksys card. These guys are ripoffs. I posted a long warning to everyone about a month ago about them and their pc cards. LINKSYS DOES NOT SUPPORT LINUX!! They are just trying to make money off of some other persons hard work. Hoping someone else has written a driver for the card. At least you got an answer back from them .. when I sent in a msg about my card and linux it took a week for them to send me a msg back telling me they don't support Linux. You are correct in assuming they are wrong about re-compiling the kernel... here's what I had to do to get the card to work on my Dell laptop. Make sure networking is turned on. Reboot Go into your bios and turn off your serial ports ( most important part!!..don't set to auto or any other choice you might be offered... turn them off.) Linux should detect your card now ... Good Luck Jay
Re: [newbie] PCMCIA CARD
Hi, all -- I think it was my posting that started this, so I would like to follow up. I found Mandrake 7.0 and installed it on the laptop in question (the original question, that is). I told it to install PCMCIA. I hadn't done this at first when I loaded 6.1, and when the startup script reported that it was starting PCMCIA it evidently wasn't. I find now that I can ping other machines in our LAN using my Linksys PCMCIA card, and I get some evidence that it is at least trying to telnet. I still have a lot to learn about using Linux as a networking operating system, but at least the problem I was having in the beginning appears to be solved. The machine sees the Linksys card, and it works at least at a very low level. (Now, what do I have to do in order to be able to Telnet from one machine to the other -- and where is the documentation on SAMBA?) Anyhow, the problem -- at least for laptops -- seems to be PCMCIA installation, not Linksys On Thu, 1 Jun 2000 20:28:59 -0500, Vic wrote: Not that I would buy one (thanks very much for the warning) but do they give you your money back if you did buy one by mistake? If not I would sue their butts. On Wed, 24 May 2000, Jay Latham wrote: I'm sorry to hear that you got suckered into buying a linksys card. These guys are ripoffs. I posted a long warning to everyone about a month ago about them and their pc cards. LINKSYS DOES NOT SUPPORT LINUX!! They are just trying to make money off of some other persons hard work. Hoping someone else has written a driver for the card. At least you got an answer back from them .. when I sent in a msg about my card and linux it took a week for them to send me a msg back telling me they don't support Linux. You are correct in assuming they are wrong about re-compiling the kernel... here's what I had to do to get the card to work on my Dell laptop. Make sure networking is turned on. Reboot Go into your bios and turn off your serial ports ( most important part!!..don't set to auto or any other choice you might be offered... turn them off.) Linux should detect your card now ... Good Luck Jay Pete Clapham Department of Biological, Geological, and Environmental Sciences Cleveland State University Cleveland, Ohio, 44115 Voice: [216] 687-4820 Fax: [216] 523-7200 [EMAIL PROTECTED]
[newbie] PCMCIA CARD
I'm sorry to hear that you got suckered into buying a linksys card. These guys are ripoffs. I posted a long warning to everyone about a month ago about them and their pc cards. LINKSYS DOES NOT SUPPORT LINUX!! They are just trying to make money off of some other persons hard work. Hoping someone else has written a driver for the card. At least you got an answer back from them .. when I sent in a msg about my card and linux it took a week for them to send me a msg back telling me they don't support Linux. You are correct in assuming they are wrong about re-compiling the kernel... here's what I had to do to get the card to work on my Dell laptop. Make sure networking is turned on. Reboot Go into your bios and turn off your serial ports ( most important part!!..don't set to auto or any other choice you might be offered... turn them off.) Linux should detect your card now ... Good Luck Jay
Re: [newbie] PCMCIA CARD
I have a linksys 10/100 pcmcia card on my laptop and it works fine - sounds like user error to me. - Original Message - From: "Jay Latham" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Wednesday, May 24, 2000 4:25 AM Subject: [newbie] PCMCIA CARD I'm sorry to hear that you got suckered into buying a linksys card. These guys are ripoffs. I posted a long warning to everyone about a month ago about them and their pc cards. LINKSYS DOES NOT SUPPORT LINUX!! They are just trying to make money off of some other persons hard work. Hoping someone else has written a driver for the card. At least you got an answer back from them .. when I sent in a msg about my card and linux it took a week for them to send me a msg back telling me they don't support Linux. You are correct in assuming they are wrong about re-compiling the kernel... here's what I had to do to get the card to work on my Dell laptop. Make sure networking is turned on. Reboot Go into your bios and turn off your serial ports ( most important part!!..don't set to auto or any other choice you might be offered... turn them off.) Linux should detect your card now ... Good Luck Jay
[newbie] PCMCIA Card
Hi, all -- I am running Linux Mandrake 6.1 on a Toshiba satellite 1625 laptop. Feeling that I wanted to connect it to my household LAN, I went to my neighborhood Office Max and bought a PCMCIA Ethernet Card (the Linksys version, which would appear to be the common sort available). When I tried to do anything with it, I discovered that although the signon log indicates that PCMCIA is being turned on OK, it does not see the card, and Eth0 is not initialized. When i called Linksys, they informed me that it would be necessary to recompile the kernel, which I don't believe. I assume that the Linksys PCMCIA Ethernet card is common, and that it should be recognized by Linux as being in the machine and that it should actually work. Do any of you have these? And what did you do to get them to work? Thanks. cheers, pete
Re: [newbie] PCMCIA Card
On Sun, 21 May 2000, Pete Clapham wrote: Hi, all -- I am running Linux Mandrake 6.1 on a Toshiba satellite 1625 laptop. Feeling that I wanted to connect it to my household LAN, I went to my neighborhood Office Max and bought a PCMCIA Ethernet Card (the Linksys version, which would appear to be the common sort available). When I tried to do anything with it, I discovered that although the signon log indicates that PCMCIA is being turned on OK, it does not see the card, and Eth0 is not initialized. When i called Linksys, they informed me that it would be necessary to recompile the kernel, which I don't believe. I assume that the Linksys PCMCIA Ethernet card is common, and that it should be recognized by Linux as being in the machine and that it should actually work. Do any of you have these? And what did you do to get them to work? Thanks. cheers, pete For what it's worthI have a Linksys ISA card and had to use the utility that came with it to turn off PNP and set the irq and i/o. Don't know if this applies to PCMCIA or not, I can't even spell PCMCIA! Tom -- TRBishop [EMAIL PROTECTED] Registered Linux User #12043
Re: [newbie] pcmcia card modem
On Tue, 12 Oct 1999, you wrote: I have just installed linux-mandrake 6.0 on my system. However. I was unable to configure pcmcia card Hayes-Option (COM 3 IRQ 10 in windows) by Kppp. Does anyone know how can I configure it? Thanks in advance, Oder. Please take a look at the documentation you received with your PCMCIA modem and see if it *requires* Windows 95 or 98. If so, you will almost surely *never* be able to configure it to work under Linux. OTOH, you might try reading "man setserial" and "man pnpdump" as well as "man isapnp." John
[newbie] pcmcia card modem
I have just installed linux-mandrake 6.0 on my system. However. I was unable to configure pcmcia card Hayes-Option (COM 3 IRQ 10 in windows) by Kppp. Does anyone know how can I configure it? Thanks in advance, Oder.
Re: [[newbie] pcmcia card modem]
"Oder Santos" [EMAIL PROTECTED] wrote: I have just installed linux-mandrake 6.0 on my system. However. I was unable to configure pcmcia card Hayes-Option (COM 3 IRQ 10 in windows) by Kppp. Does anyone know how can I configure it? Thanks in advance, Oder. === Not ure, but i believe only COM 1 COM 2 exist by default. You may have to creat COM 3 by running setserial Mike Get your own FREE, personal Netscape WebMail account today at http://webmail.netscape.com.