Re: [newbie] PMFirewall question...
Dennis Myers wrote: I would have to agree, mine does about a two page print of many different ports and I haven't found the screen shot menu so I can't post it. But, based on mine I would say yours is not set up to do a whole lot of good. When I set up mine I said no to most of the ports and allowed unlimited access only to the addresses on my local net and 127.0.0.1. you might try a new install. Good Luck, Dennis I followed the script recommendation posted a couple of times on this list. ;-( I did say no to most options. I gave that 127.0.0.1/255.255.255.0 range, only opening port 110 (I think) for service. I'm a little unclear as to how its supposed to start. I picked no for startup at boot, but yes for startup upon successfull ppp connection. So, is the startup line supposed to go in /etc/ip-up, or /etc/ip-up.local or in /etc/ppp/ip-up or /etc/ppp/ip-up.local? ;-) Thanks! -- /\ DarkLord \/
Re: [newbie] PMFirewall question...
Eric Becker wrote: Type ipchains -L to see if pmfirewall is running. If there's a whole bunch of rules listed...then it's working. If it just says: Chain input (policy ACCEPT): Chain forward (policy DENY): Chain output (policy ACCEPT): If it just says that, and nothing else...then it ain't working. You may have to manually run /etc/rc.d/init.d/pmfirewall. I've attached a small text file that shows what I got. Can you look at it and tell me what you think? Thanks! ;-) -- /\ DarkLord \/ [root@localhost darklord]# ipchains -L Chain input (policy ACCEPT): target prot opt sourcedestination ports ACCEPT all -- anywhere anywhere n/a ACCEPT tcp !y anywhere davl1-3.kih.net any - any
RE: [newbie] PMFirewall question...
Ya...that's probably not working correctly. I haven't really played with pmfirewall for a ppp connection. The only thing I could tell ya is to go to www.pmfirewall.com and check out their mailing list. I'd either just subscribe to that mailing list...or just browse through the archive. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Ronald J. Hall Sent: Tuesday, November 14, 2000 7:39 AM To: [EMAIL PROTECTED] Subject: Re: [newbie] PMFirewall question... Eric Becker wrote: Type ipchains -L to see if pmfirewall is running. If there's a whole bunch of rules listed...then it's working. If it just says: Chain input (policy ACCEPT): Chain forward (policy DENY): Chain output (policy ACCEPT): If it just says that, and nothing else...then it ain't working. You may have to manually run /etc/rc.d/init.d/pmfirewall. I've attached a small text file that shows what I got. Can you look at it and tell me what you think? Thanks! ;-) -- /\ DarkLord \/
Re: [newbie] PMFirewall question...
I would have to agree, mine does about a two page print of many different ports and I haven't found the screen shot menu so I can't post it. But, based on mine I would say yours is not set up to do a whole lot of good. When I set up mine I said no to most of the ports and allowed unlimited access only to the addresses on my local net and 127.0.0.1. you might try a new install. Good Luck, Dennis Eric Becker wrote: Ya...that's probably not working correctly. I haven't really played with pmfirewall for a ppp connection. The only thing I could tell ya is to go to www.pmfirewall.com and check out their mailing list. I'd either just subscribe to that mailing list...or just browse through the archive. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Ronald J. Hall Sent: Tuesday, November 14, 2000 7:39 AM To: [EMAIL PROTECTED] Subject: Re: [newbie] PMFirewall question... Eric Becker wrote: Type ipchains -L to see if pmfirewall is running. If there's a whole bunch of rules listed...then it's working. If it just says: Chain input (policy ACCEPT): Chain forward (policy DENY): Chain output (policy ACCEPT): If it just says that, and nothing else...then it ain't working. You may have to manually run /etc/rc.d/init.d/pmfirewall. I've attached a small text file that shows what I got. Can you look at it and tell me what you think? Thanks! ;-) -- /\ DarkLord \/ -- Dennis M. a registered Linux user #180842
[newbie] PMFirewall question...
Okay, I'm currently using ipchains/PMFirewall. My question is, since I *think* I've got everything installed correctly (the script said it installed OK), should I not be able to see PMFirewall running, using something like ktop or top, after I've connected to the 'Net? I picked the options where PMF does not start up at boot, but upon a successfull ppp connection. Thanks! -- /\ DarkLord \/
RE: [newbie] PMFirewall question...
Type ipchains -L to see if pmfirewall is running. If there's a whole bunch of rules listed...then it's working. If it just says: Chain input (policy ACCEPT): Chain forward (policy DENY): Chain output (policy ACCEPT): If it just says that, and nothing else...then it ain't working. You may have to manually run /etc/rc.d/init.d/pmfirewall. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Ronald J. Hall Sent: Monday, November 13, 2000 2:19 PM To: Mandrake Newbie Mailing List Subject: [newbie] PMFirewall question... Okay, I'm currently using ipchains/PMFirewall. My question is, since I *think* I've got everything installed correctly (the script said it installed OK), should I not be able to see PMFirewall running, using something like ktop or top, after I've connected to the 'Net? I picked the options where PMF does not start up at boot, but upon a successfull ppp connection. Thanks! -- /\ DarkLord \/
