Re: [newbie] cd-rw install
Hi All, here I come again,"oldman newbies", trying to find help for my 2 cdroms and 2 harddrives.As Hans' has help and LM7.2 "Rem Storage iv " has help me I still have problems. Okay,I read "file:/var/log/messages, I got something like this "ide_setup:hdc=ide-scsi ...the 2nd cdrom was "hdd" as instructed I looked for "kudzu:linked/dev/cdrom1 to /dev/scd0"...it went well, I continued to proceed "kudzu:linked /dev/cdrom2 to /dev/scd1"..this went well,I continued, I did a "cdrecord -scanbus" to list the "info" I "su"to root and typed the command...indecated below "cd/dev rm cdroom ln -s scd0 cdrom"...I said "yes" at prompt followed the same steps for the 2nd cdrom "cd /dev/ rm cdrom2 ln -s scd1 cdrom"it all went well with no errors I logout to reboot At login I attempted to access my cdroms I got the error 11(sigsegv) I did not have to do any thing to my harddrives because they would give me the same error "11(sigsegv)" Hey All, somebody out there must know what this means.If I can get this corrected, I believe I'll be alright. Thanks a million. [EMAIL PROTECTED] LM Register #207672
RE: [newbie] cd-rw install
Hey KompuKit, I just did this earlier today. I have some kind of factory installed Phillips CD-RW 4x4x24. I'm not sure which one specifically, I didn't open my box to find out. But, I had the problem of not being able to use my CD-RW drive at all. So I did some searching in the mail archives and happened upon a Mandrake tutorial that addresses this issue. http://www.linux-mandrake.com/en/demos/Tutorial/CDburner/ Basically it tells you to check out some info to make sure things are okay to go on and has you delete a bad link, then presto, the drive should work. Well, it did for me anyways. Hope this solves your problem. Hans N. [EMAIL PROTECTED] -Original Message- From: KompuKit I'm trying to setup scsi emulation in mandrake 7.2... HOW do I do this...? I installed a HP cd-rw 9150i as secondary slave which in linux is: hdd harddrake recognised the drive I tried the setup instructions below...but it won't work.. http://www.mandrakeuser.org/hardware/hremov3.html -- Registered Linux User: 167369 = http://www.kompukit.com = [EMAIL PROTECTED]ICQ# 7110071 Personal WebServer: http://kompukit.dyndns.org WebDesigner: http://www.kompukit.com/kitdesigns (Personal Server runs: M-F= 7pm-12am S+S=12pm-12am) (US EST)
[newbie] cd-rw install
I'm trying to setup scsi emulation in mandrake 7.2... HOW do I do this...? I installed a HP cd-rw 9150i as secondary slave which in linux is: hdd harddrake recognised the drive I tried the setup instructions below...but it won't work.. http://www.mandrakeuser.org/hardware/hremov3.html -- Registered Linux User: 167369 = http://www.kompukit.com = [EMAIL PROTECTED]ICQ# 7110071 Personal WebServer: http://kompukit.dyndns.org WebDesigner: http://www.kompukit.com/kitdesigns (Personal Server runs: M-F= 7pm-12am S+S=12pm-12am) (US EST)
Re: [newbie] cd-rw install
Hi try this page http://www.linux-mandrake.com/en/demos/Tutorial/CDburner/ Just visiting this planet, Please sign the Linux Driver petition http://www.libranet.com/petition.html http://ants.www4.50megs.com/linux.html http://www.50megs.com Anthony Daniell - Original Message - From: "KompuKit" [EMAIL PROTECTED] To: "Linux-Mandrake" [EMAIL PROTECTED]; "Expert" [EMAIL PROTECTED] Sent: Friday, March 02, 2001 8:26 AM Subject: [newbie] cd-rw install I'm trying to setup scsi emulation in mandrake 7.2... HOW do I do this...? I installed a HP cd-rw 9150i as secondary slave which in linux is: hdd harddrake recognised the drive I tried the setup instructions below...but it won't work.. http://www.mandrakeuser.org/hardware/hremov3.html -- Registered Linux User: 167369 = http://www.kompukit.com = [EMAIL PROTECTED]ICQ# 7110071 Personal WebServer: http://kompukit.dyndns.org WebDesigner: http://www.kompukit.com/kitdesigns (Personal Server runs: M-F= 7pm-12am S+S=12pm-12am) (US EST)
Re: [newbie] cd-rw install
KompuKit wrote: I'm trying to setup scsi emulation in mandrake 7.2... HOW do I do this...? I tried the redhat approach...but everytime I reconfigure lilo... it says theres a syntax error. this is what I did... at the end of /etc/rc.local I put: insmod ide-scsi then at the end of /etc/lilo.conf I put: append="hdd=ide-scsi" this was in a how-to for redhat... I installed a HP cd-rw 9150i as secondary slave which in linux is: hdd harddrake recognised the drive Complete instructions to accomplish your task can be found on the following page of mandrakeuser.org: http://www.mandrakeuser.org/hardware/hremov3.html -- Alan
[newbie] cd-rw install
I'm trying to setup scsi emulation in mandrake 7.2... HOW do I do this...? I tried the redhat approach...but everytime I reconfigure lilo... it says theres a syntax error. this is what I did... at the end of /etc/rc.local I put: insmod ide-scsi then at the end of /etc/lilo.conf I put: append="hdd=ide-scsi" this was in a how-to for redhat... I installed a HP cd-rw 9150i as secondary slave which in linux is: hdd harddrake recognised the drive -- Registered Linux User: 167369 = http://www.kompukit.com = [EMAIL PROTECTED]ICQ# 7110071 Personal WebServer: http://kompukit.dyndns.org WebDesigner: http://www.kompukit.com/kitdesigns (Personal Server runs: M-F= 7pm-12am S+S=12pm-12am) (US EST)
[newbie] CD-RW install
I'm buying a HP 9150i CD-RW drive...wednesday... was wondering: do I set it up as my secondary master or slave? (already have a 6x cd-rom drive setup as secondary master) also, can someone suggest a real good, but easy instuction set for setting up the cd-rw in linux...? -- Registered Linux User: 167369 = http://www.kompukit.com = [EMAIL PROTECTED]ICQ# 7110071 Personal WebServer: http://kompukit.dyndns.org WebDesigner: http://www.kompukit.com/kitdesigns (Personal Server runs: M-F= 7pm-12am S+S=12pm-12am)
Re: [newbie] CD-RW install
On Saturday 24 February 2001 01:28, you wrote: CD-RW's generally work best when configured as a slave device I'm buying a HP 9150i CD-RW drive...wednesday... was wondering: do I set it up as my secondary master or slave? (already have a 6x cd-rom drive setup as secondary master) also, can someone suggest a real good, but easy instuction set for setting up the cd-rw in linux...?
Re: [newbie] CD-RW install
On Friday 23 February 2001 23:28, you wrote: I'm buying a HP 9150i CD-RW drive...wednesday... was wondering: do I set it up as my secondary master or slave? (already have a 6x cd-rom drive setup as secondary master) also, can someone suggest a real good, but easy instuction set for setting up the cd-rw in linux...? Check out the "Newbieized Help File" on CR-RW installation at the Linux Newbie site http://www.linuxnewbie.org . And, yes, these devices do prefer to be in the "slave" position. You will need to recompile the kernel to disable "IDE CDROM" and emable "Generic SCSI Support" and "SCSI CDROM Support". And append device=EIDE-SCSI to LILO (or GRUB as the case may be. Bob
Re: [newbie] CD-RW install
Look around at http://www.mandrakeuser.org/. There's a great tutorial there. On Sat, 24 Feb 2001 17:28, KompuKit wrote: I'm buying a HP 9150i CD-RW drive...wednesday... was wondering: do I set it up as my secondary master or slave? (already have a 6x cd-rom drive setup as secondary master) also, can someone suggest a real good, but easy instuction set for setting up the cd-rw in linux...? -- Sridhar Dhanapalan. "There are two major products that come from Berkeley: LSD and UNIX. We don't believe this to be a coincidence." -- Jeremy S. Anderson