Re: [Qgis-user] Issue using Symbology Style

[Burghardt.Scholle]

Hello Nuno,

I also often use the map units to get a scaled representation. To prevent the 
effects you describe, I always use the "Adjust Scaling Range" option (see 
wrench button on the right side of the selection dialog). There you can enter 
for example a minimum / maximum scale. The change of the feature size in the 
map then moves only within the specified scale range. If necessary, you have to 
try a little bit to get the appropriate values.

Hope this helps
Regards
Burghardt


Von: Qgis-user  im Auftrag von Alexandre 
Neto 
Gesendet: Mittwoch, 1. September 2021 00:53
An: Nuno Manuel de Figueiredo de Santos Loureiro
Cc: QGIS User
Betreff: Re: [Qgis-user] Issue using Symbology Style

Hello Nuno,

When you use map units, it means that the symbols size will change with the 
scale. At some bigger map scales, they can be ao small that disappear, in other 
lower scales it can be too big to fit inside a small polygon.

Unless you have a particular reason to use map units, you are better with 
millimetres. A symbol with 2 mm will keep that size at all scales.

Alexandre Neto
User support
Www.qcooperative.net

A segunda, 30/08/2021, 23:13, Nuno Manuel de Figueiredo de Santos Loureiro 
mailto:nlou...@ualg.pt>> escreveu:
Hello all,

I'm producing a LCLU map and I 've created Symbols with Colours and Font 
Markers. Units are always configured as 'Map Units'.

In some of the polygons the letters appear and disappear when the scale 
changes. The same happens when I prepare Layouts. Depending on the scale being 
used, the letters are either visible or invisible. This does not happen on all 
polygons. It only happens in some...

Can anyone give suggestions on the cause of this problem, and how to solve it?

Very grateful in advance!


Nuno

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: 
https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: 
https://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Windows BATCH-File Start

[Burghardt.Scholle]

Hi Asmus,

perhaps you may need to include the call in a powershell script.

Regards
Burghardt

-Ursprüngliche Nachricht-
Von: asmus.li...@gmx.de [mailto:asmus.li...@gmx.de] 
Gesendet: Dienstag, 27. April 2021 07:15
An: Scholle, Burghardt (15-3 GIS); qgis-user@lists.osgeo.org
Betreff: Re: [Qgis-user] Windows BATCH-File Start

Thanks Burghardt,

no, it don't work. It is still not posible to start a batch file with some 
paramter as a layer-action.
Any other hints?

Regards
Asmus


Am 26.04.2021 um 07:09 schrieb burghardt.scho...@stadt.wolfsburg.de:
>
> Hi Asmus,
>
> I think on Windows 10 you need to prefix your command with 
> "C:\Windows\System32\cmd.exe".
>
> Hope this helps.
>
> Regards
>
> Burghardt
>
> *Von:*Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] *Im Auftrag 
> von *Asmus Harder
> *Gesendet:* Freitag, 23. April 2021 13:41
> *An:* qgis-user@lists.osgeo.org
> *Betreff:* [Qgis-user] Windows BATCH-File Start
>
> Hi there,
>
> I tried to use in QGIS 3.16 on Windows10 a old layer-action from QGIS 
> 2.18.
> If I cklick on one object the action should start an BATCH-file and 
> gives some attributes as parameter to the batch-file. But it doesn't 
> work, nothing happens.
>
> In QGIS2.18 it works fine.
>
> If I use "Open" as type and only the BATCH-File without parameter than 
> the BATCH opens. If I add an parameter than nothing happens.
>
> For example this work:
>
> "d:\Test_Batch_Aufruf.bat"
>
> but this doesn't work:
> "d:\Test_Batch_Aufruf.bat" "Hello"
>
> If I use a exe-file it works with a parameter.
> For example this work fine:
> "c:\Program Files\IrfanView\i_view64.exe" "D:\50342_col.tif"
>
> Any idea why the BATCH-file doesn't start with parameter?
>
> greetings
> Asmus
>

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Windows BATCH-File Start

[Burghardt.Scholle]

Hi Asmus,

I think on Windows 10 you need to prefix your command with 
"C:\Windows\System32\cmd.exe".
Hope this helps.

Regards
Burghardt


Von: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag von Asmus 
Harder
Gesendet: Freitag, 23. April 2021 13:41
An: qgis-user@lists.osgeo.org
Betreff: [Qgis-user] Windows BATCH-File Start

Hi there,

I tried to use in QGIS 3.16 on Windows10 a old layer-action from QGIS 2.18.
If I cklick on one object the action should start an BATCH-file and gives some 
attributes as parameter to the batch-file. But it doesn't work, nothing happens.
In QGIS2.18 it works fine.

If I use "Open" as type and only the BATCH-File without parameter than the 
BATCH opens. If I add an parameter than nothing happens.

For example this work:
"d:\Test_Batch_Aufruf.bat"
but this doesn't work:
"d:\Test_Batch_Aufruf.bat" "Hello"

If I use a exe-file it works with a parameter.
For example this work fine:
"c:\Program Files\IrfanView\i_view64.exe" "D:\50342_col.tif"

Any idea why the BATCH-file doesn't start with parameter?

greetings
Asmus


___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QGIS 3.10 Repository Ubuntu

[Burghardt.Scholle]

Hi Klaus,

have a look under "/var/cache/apt/archives". Maybe you can still find the 
deb-package for the old QGIS version there. This has helped me before.

Regards
Burghardt

-Ursprüngliche Nachricht-
Von: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag von 
Richard Duivenvoorde
Gesendet: Mittwoch, 24. Februar 2021 11:58
An: qgis-user@lists.osgeo.org
Betreff: Re: [Qgis-user] QGIS 3.10 Repository Ubuntu

On 2/24/21 11:42 AM, Klaus Mithöfer wrote:
> Dear list,
> 
> I would like to install the previous QGIS LTR 3.10 on my Ubuntu system. Is a 
> repository for that version still available?

I think this depends on the Ubuntu version you run... But 3.10 is the OLD LTR 
isn't it? 

Should you not install 3.16 now (or ask if 3.16 (or an older version) is also 
ok)? 

Looking at Focal: 
https://qgis.org/ubuntu/dists/focal/main/binary-amd64/Packages packages are all 
upgraded to 3.12 or higher..?

What does the Ubuntu repo itself serv?

Or else: compile local?

Regards,

Richard Duivenvoorde
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Qgis does not start after win10 update

[Burghardt.Scholle]

Hi Nicolas,

the error is “... bin\qgis_core.dll” ☺.
But as I said, I can fix the error if the file opencl.dll is present in the 
directory "%OSGEO4W_ROOT%\bin".

Regards
Burghardt


Von: Nicolas Cadieux [mailto:njacadieux.git...@gmail.com]
Gesendet: Freitag, 11. Dezember 2020 16:16
An: Scholle, Burghardt (15-3 GIS)
Cc: thomas.strul...@lga-geo.de; qgis-user@lists.osgeo.org
Betreff: Re: [Qgis-user] Qgis does not start after win10 update

Hi,

I remember now getting this one now when updating openCL... a few years back...

Is the error” ... binqgis_core.dll” or “... bin\qgis_core.dll”?  I need to take 
notes.  There has been a few or these in the last few weeks.

Nicolas Cadieux
https://gitlab.com/njacadieux


Le 11 déc. 2020 à 01:30, 
burghardt.scho...@stadt.wolfsburg.de
 a écrit :
binqgis_core.dll
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Qgis does not start after win10 update

[Burghardt.Scholle]

Hi Thomas,

I also get this message frequently in connection with a missing opencl.dll. 
Please check if this file is located in the directory "C:\windows\system32". 
Important: it must be 121 KB in size.
If this file is missing, you will get the mentioned error message. Maybe you 
can copy the file from a running QGIS on another system. 
For this please use the directory "%OSGEO4W_ROOT%\bin".

Hope this helps.

Regards
Burghardt

-Ursprüngliche Nachricht-
Von: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag von Jürgen 
E. Fischer
Gesendet: Donnerstag, 10. Dezember 2020 16:39
An: Thomas Struller
Cc: 'qgis-user@lists.osgeo.org'
Betreff: Re: [Qgis-user] Qgis does not start after win10 update

Hi Thomas,

On Thu, 10. Dec 2020 at 08:31:55 +, Thomas Struller wrote:
> I got this message on startup: (sorry german) Der 
> Prozedureinsprungpunkt "clCreateCommandQueueWithProperties wurde in 
> der DLL "C\OSGEO4-~1\apps\binqgis_core.dll" nicht gefunden.

clCreateCommandQueueWithProperties points to opencl.

Try to reinstall the opencl package.


Jürgen

-- 
Jürgen E. Fischer   norBIT GmbH Tel. +49-4931-918175-31
Dipl.-Inf. (FH) Rheinstraße 13  Fax. +49-4931-918175-50
Software Engineer   D-26506 Nordenhttps://www.norbit.de
QGIS release manager (PSC)  GermanyIRC: jef on FreeNode
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Location of GRASS Plugin

[Burghardt.Scholle]

Hi Dave,

I see r.surf.contour in 3.4.12, 3.4.14 and 3.10.1. Maybe you should start QGIS 
with a complet new profile?

Regards 
Burghardt

> -Ursprüngliche Nachricht-
> Von: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag von
> Dave Gardiner
> Gesendet: Donnerstag, 12. Dezember 2019 04:30
> An: qgis-user@lists.osgeo.org
> Betreff: [Qgis-user] Location of GRASS Plugin
> 
> HI
> Could someone tell me how I find and activate the GRASS plugin
> r.surf.contour which is missing from my Processing Toolbox (Version 3.4.13)
> 
> Regards
> Dave
> 
> 
> 
> --
> Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-User-f4125267.html
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QGIS 3 - Joins

[Burghardt.Scholle]

Hi Karl-Magnus,

thank you for the hint. I'll give it a try again - next week :-).

Burghardt

> -Ursprüngliche Nachricht-
> Von: Karl Magnus Jönsson [mailto:karl-magnus.jons...@kristianstad.se]
> Gesendet: Freitag, 18. Oktober 2019 12:56
> An: Scholle, Burghardt (15-3 GIS); b.j.kob...@utwente.nl; qgis-
> u...@lists.osgeo.org
> Betreff: SV: [Qgis-user] QGIS 3 - Joins
> 
> Hi!
> It could work editing views if you set up some triggers or rules for editing 
> the
> view.
> 
> Karl-Magnus
> 
> -Ursprungligt meddelande-
> Från: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] För
> burghardt.scho...@stadt.wolfsburg.de
> Skickat: den 18 oktober 2019 12:09
> Till: b.j.kob...@utwente.nl; qgis-user@lists.osgeo.org
> Ämne: Re: [Qgis-user] QGIS 3 - Joins
> 
> Hi Barend,
> 
> you're right, I know this way and use it a lot as well. Unfortunately I have 
> to
> edit features in this layer and that doesn't work with views.
> 
> Burghardt
> 
> > -Ursprüngliche Nachricht-
> > Von: b.j.kob...@utwente.nl [mailto:b.j.kob...@utwente.nl]
> > Gesendet: Freitag, 18. Oktober 2019 11:53
> > An: Scholle, Burghardt (15-3 GIS); qgis-user@lists.osgeo.org
> > Betreff: Re: [Qgis-user] QGIS 3 - Joins
> >
> > Another way would be to leave the joining up to Postgres, i.e. create
> > a VIEW with the Join and load that view as a layer in QGIS...
> > --
> > Barend Köbben
> >
> > On 18/10/2019, 10:16, "Qgis-user on behalf of
> > burghardt.scho...@stadt.wolfsburg.de"
> >  > on behalf of burghardt.scho...@stadt.wolfsburg.de> wrote:
> >
> > Dear list,
> >
> > I have a postgres layer that is connected to other postgres lookup
> > tables via joins. QGIS does not take these joins into account when
> > copying a layer (to another project) or when creating style or layer
> > files. This is really annoying if you have to rebuild the joins by
> > hand over and over again. Am I doing something wrong? In the dialog
> > window "Edit Vector Join" I see no further ways. I only activated the option
> "Cache join layer in virtual memory".
> >
> > Any hint is appreciated, thanks.
> > I'm using QGIS LTR 3.4.12
> >
> > Regards
> > Burghardt
> >
> > ***
> >
> > Stadt Wolfsburg
> > Geschäftsbereich IT - 15-3 GIS
> > Rathaus E, Zi. E 313, Porschestraße 47A, D-38440 Wolfsburg
> > Tel +49 5361 28-2531
> > Fax +49 5361 28-1765
> > mailto:burghardt.scho...@stadt.wolfsburg.de
> >
> >
> >
> > ___
> > Qgis-user mailing list
> > Qgis-user@lists.osgeo.org
> > List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> > Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
> 
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QGIS 3 - Joins

[Burghardt.Scholle]

Hi Barend,

you're right, I know this way and use it a lot as well. Unfortunately I have to 
edit features in this layer and that doesn't work with views.

Burghardt

> -Ursprüngliche Nachricht-
> Von: b.j.kob...@utwente.nl [mailto:b.j.kob...@utwente.nl]
> Gesendet: Freitag, 18. Oktober 2019 11:53
> An: Scholle, Burghardt (15-3 GIS); qgis-user@lists.osgeo.org
> Betreff: Re: [Qgis-user] QGIS 3 - Joins
> 
> Another way would be to leave the joining up to Postgres, i.e. create a VIEW
> with the Join and load that view as a layer in QGIS...
> --
> Barend Köbben
> 
> On 18/10/2019, 10:16, "Qgis-user on behalf of
> burghardt.scho...@stadt.wolfsburg.de"  on behalf of burghardt.scho...@stadt.wolfsburg.de> wrote:
> 
> Dear list,
> 
> I have a postgres layer that is connected to other postgres lookup tables 
> via
> joins. QGIS does not take these joins into account when copying a layer (to
> another project) or when creating style or layer files. This is really 
> annoying if
> you have to rebuild the joins by hand over and over again. Am I doing
> something wrong? In the dialog window "Edit Vector Join" I see no further
> ways. I only activated the option "Cache join layer in virtual memory".
> 
> Any hint is appreciated, thanks.
> I'm using QGIS LTR 3.4.12
> 
> Regards
> Burghardt
> 
> ***
> 
> Stadt Wolfsburg
> Geschäftsbereich IT - 15-3 GIS
> Rathaus E, Zi. E 313, Porschestraße 47A, D-38440 Wolfsburg
> Tel +49 5361 28-2531
> Fax +49 5361 28-1765
> mailto:burghardt.scho...@stadt.wolfsburg.de
> 
> 
> 
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QGIS 3 - Joins

[Burghardt.Scholle]

Hi Alessandro,

good news, thanks for your reply and to your customer.

Regards
Burghardt

Von: Alessandro Pasotti [mailto:apaso...@gmail.com]
Gesendet: Freitag, 18. Oktober 2019 10:27
An: Scholle, Burghardt (15-3 GIS)
Cc: qgis-user
Betreff: Re: [Qgis-user] QGIS 3 - Joins



On Fri, Oct 18, 2019 at 10:15 AM 
mailto:burghardt.scho...@stadt.wolfsburg.de>>
 wrote:
Dear list,

I have a postgres layer that is connected to other postgres lookup tables via 
joins. QGIS does not take these joins into account when copying a layer (to 
another project) or when creating style or layer files. This is really annoying 
if you have to rebuild the joins by hand over and over again. Am I doing 
something wrong? In the dialog window "Edit Vector Join" I see no further ways. 
I only activated the option "Cache join layer in virtual memory".

Hi,

It's a known issue, the root cause is that the relations/joins are stored by 
QGIS using the layer ID (which is unique) so the relations are lost in case of 
layer copy or save/load from a style file, the good new is that I've got a 
customer that has committed some budget to fix this problem and I'll start to 
work on that soon.

The solution would imply storing some more information about the layers that 
compose a relation so that we can at try to reconstruct the relation by 
searching for "similar" layers in the existing project before giving up with a 
broken relation/join.

The same issue applies to the value-relation widget.

--
Alessandro Pasotti
w3:   www.itopen.it
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

[Qgis-user] QGIS 3 - Joins

[Burghardt.Scholle]

Dear list,

I have a postgres layer that is connected to other postgres lookup tables via 
joins. QGIS does not take these joins into account when copying a layer (to 
another project) or when creating style or layer files. This is really annoying 
if you have to rebuild the joins by hand over and over again. Am I doing 
something wrong? In the dialog window "Edit Vector Join" I see no further ways. 
I only activated the option "Cache join layer in virtual memory". 

Any hint is appreciated, thanks. 
I'm using QGIS LTR 3.4.12

Regards
Burghardt

***

Stadt Wolfsburg
Geschäftsbereich IT - 15-3 GIS
Rathaus E, Zi. E 313, Porschestraße 47A, D-38440 Wolfsburg
Tel +49 5361 28-2531
Fax +49 5361 28-1765
mailto:burghardt.scho...@stadt.wolfsburg.de



___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Can't print large QGIS file

[Burghardt.Scholle]

Hi Genene,

have you already tried to print directly into a PDF using a printer driver 
(e.g. CutePDF)? This has helped me a lot in the past.

Regards
Burghardt

Von: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag von Genene 
Schumacher
Gesendet: Donnerstag, 18. Juli 2019 07:47
An: 'Qgis-user@lists.osgeo.org'
Betreff: [Qgis-user] Can't print large QGIS file

I am using QGIS 3.4.1   I have a map of the water & sewer assets for the 
authorities region.

I have a list of about 20 maps created and showing in Layout Manager.  Most 
maps print but the one with lots of data (pipes) showing won't export to pdf. 
QGIS crashes every time.

Any ideas how to get it into a pdf ?


Regards,
Genene




This e-mail, including any attachments, is confidential and for the sole use of 
the intended recipient(s). It may contain copyright and/or legally privileged 
material and/or personal information. If you are not the intended recipient, 
you are not authorised to disclose, copy, use, distribute or in any other way 
make use of the information contained in it, and such activities are 
prohibited. If you have received this e-mail in error, please notify the sender 
by reply e-mail, delete the document and destroy all copies of the original 
message.

There is no warranty that this email is error or virus free. Please consider 
the environment before printing.
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Postgis layer: attributes not editable if field has a default value

[Burghardt.Scholle]

Hi Tom,

you‘re right. It's a bug that was fixed in the current LTR nightly. Please try 
with this version or wait until 3.4.10.
BTW, this error does not appear with 3.6.

Regards Burghardt


Von: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag von tommaso
Gesendet: Donnerstag, 11. Juli 2019 14:09
An: qgis-user@lists.osgeo.org
Betreff: [Qgis-user] Postgis layer: attributes not editable if field has a 
default value

Hello,
I'm using Qgis 3.4.4 Madeira on Ubuntu 16.04 and it seems that the attributes 
of Postgis layers are not editable if the corresponding field has a default 
value at the database level.
I observed this issue with fields of type boolean and hstore.
For example, if the field "active" of the table "test" has a default value:

Table "test"
Column | Type | Modifiers
+-+--
 id| integer |
 name  | hstore  |
active | boolean | default true

than the field "active" is not editable in the attribute table in Qgis.

Could you please help me?

Regards Tom
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] User question of the month

[Burghardt.Scholle]

Hi Anita,

I have problems sending the completed questionnaire for the current survey. A 
click on "send" obviously remains ineffective. I have tried several browsers 
(Firefox, Chrome, IE 11). Could you take a look at this, please?

Regards
Burghardt

Von: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag von Anita 
Graser
Gesendet: Montag, 3. Dezember 2018 22:24
An: qgis-user
Betreff: Re: [Qgis-user] User question of the month

Dear users,

The answers to the user question of November have now been published: 
http://blog.qgis.org/2018/12/03/user-question-of-the-month-dec-18-answers-from-nov/

We also have a new question for December: what you think 
QGIS.ORG should focus on in 2019? 
https://goo.gl/forms/2xOP1rSz8AaDCCi02

Regards,
Anita


On Sun, Nov 11, 2018 at 10:23 PM Anita Graser 
mailto:anitagra...@gmx.at>> wrote:
Dear users,

QGIS 2.18 is the third LTR since we started this effort back in 2015 and next 
year will see the first LTR of QGIS 3. On this occasion, we want to learn more 
about our users and which versions of QGIS they use. Therefore, we invite you 
to our QGIS user question of the month: https://goo.gl/forms/m27b3W477fFNYtxg1

Regards,
Anita
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] rename layer of geopackage in qgis 3.4

[Burghardt.Scholle]

Hi,

you can rename a table (layer) in a GeoPackage using the DB Manager.

Hope, this helps.

Regards
Burghardt

Von: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag von 
bru...@mailbox.org
Gesendet: Dienstag, 20. November 2018 14:41
An: qgis-user@lists.osgeo.org
Betreff: [Qgis-user] rename layer of geopackage in qgis 3.4

Hy there

Maybe I don't get the simple way: How can I rename a layer of a geopackage in 
QGIS 3.4.1? I'm speaking of the layer of the database (.gpkg), not the name of 
the layer-reference in the layer panel in QGIS. I can create a new layer in the 
Browser and I can delete it. How to rename it?
Thanks


Bruno Streit
3008 Bern
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] geopackage spatial query

[Burghardt.Scholle]

Hi Klaus,
as far as I understand it, geopackage does not support spatial functions  - 
opposite to spatialite (see [1]). I mean, this topic was also discussed at the 
QGIS user meeting in Essen.

[1] 
https://gis.stackexchange.com/questions/228210/using-geopackage-instead-of-spatialite-and-vice-versa

Regards
Burghardt


> -Ursprüngliche Nachricht-
> Von: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag von
> Mithoefer
> Gesendet: Montag, 29. Oktober 2018 14:36
> An: qgis-user@lists.osgeo.org
> Betreff: [Qgis-user] geopackage spatial query
> 
> Dear List,
> 
> I have a geopackage database and tried to use a spatial sql function
> (st_area) using the db manager in qgis 3.4  --> select st_area(geom)
> from polygon_filename. The function is available, but the result is
> Null. What is the problem?
> 
> Thanks a lot
> 
> Kind regards
> 
> Klaus
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] filter on joined table broken?

[Burghardt.Scholle]

Hi Tobias,

I don't think you make something wrong. I can confirm your problem also with 
QGIS 2.18.x. 

If your data is in postgres, there is a workaround: create a view in postgres 
that includes both the table and the joins. Load this view into QGIS and you 
can set any filters again.

Regards
Burghardt

> -Ursprüngliche Nachricht-
> Von: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag von
> Tobias Wendorff
> Gesendet: Donnerstag, 16. August 2018 19:59
> An: qgis-user@lists.osgeo.org
> Betreff: [Qgis-user] filter on joined table broken?
> 
> Hi there,
> 
> when creating a table join using "joins" in "layer properties", you
> can't filter the resulting table. QGIS informs that it's needed to
> build a virtual layer to make filtering work. But even if you select
> "yes", the joined fields don't appear in attribute table.
> 
> It doesn't matter if you create a virtual join in memory or not.
> Sure, you create a join using "processing", but this creates a new
> dataset. I'm also missing a "drop none-joined rows" in here...
> (ArcGIS style) this seems to be only available from "processing"
> 
> I'm on latest QGIS 3.3 on Windows 7, 64 bit. The problem also occurs
> on QGIS 3.2 stable. Before filing a bug, I'd like to discuss it here.
> Perhaps I'm doing something wrong. I've tested this on three different
> systems (okay, one is running an older version of QGIS3.3-dev on Windows
> 10).
> 
> Best regards,
> Tobias
> 
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

[Qgis-user] Problems with MS SQL Server 2010 and QGIS 2.18.x / 3.2.x

[Burghardt.Scholle]

Hi list,

I have big problems loading MS SQL Server 2010 data with QGIS 2.18 and QGIS 
3.2.x. Up to version 2.14 there were no problems. With 2.18 QGIS crashes after 
a few steps (zooming, moving, identifying etc.) with a minidump. Here I could 
reduce the behavior a bit, after disabling the option "Draw layers with many 
CPU cores in parallel". Nevertheless, access does not function completely 
smoothly. Especially during intensive, longer work with the data, there are 
repeated crashes.

Under QGIS 3.2.1, productive work is not possible at all. The MS SQL data can 
be added to the project, but QGIS crashes after just one or two steps:

*Crash ID*: 7c868adf9b18d0dbc3a8d4dd55f9dcf5a92ff5b0


*Stack Trace*

RtlEnterCriticalSection :
SQLAllocHandle :
SQLGetStmtOption :
SQLGetStmtAttrW :
sourceSelectProviders :
sourceSelectProviders :
sourceSelectProviders :
QgsVectorLayerFeatureIterator::QgsVectorLayerFeatureIterator :
QgsVectorLayerFeatureSource::getFeatures :
QgsProcessingFeedback::~QgsProcessingFeedback :
QgsMapRendererCustomPainterJob::doRender :
QgsMapRendererCustomPainterJob::staticRender :
QgsMapRendererCustomPainterJob::renderSynchronously :
QThreadPoolPrivate::reset :
QThread::start :
BaseThreadInitThunk :
RtlUserThreadStart :


*QGIS Info*
QGIS Version: 3.2.1-Bonn
QGIS code revision: commit:1edf372fb8
Compiled against Qt: 5.9.2
Running against Qt: 5.9.2
Compiled against GDAL: 2.2.4
Running against GDAL: 2.2.4

*System Info*
CPU Type: x86_64
Kernel Type: winnt
Kernel Version: 6.1.7601

Does anyone have similar problems with MS SQL data?  I would be very grateful 
for any hint or tip.

Kind regards
Burghardt

***

Stadt Wolfsburg
Geschäftsbereich IT - 15-3 GIS
Rathaus E, Zi. E 313, Porschestraße 47A, D-38440 Wolfsburg
Tel +49 5361 28-2531
Fax +49 5361 28-1765
mailto:burghardt.scho...@stadt.wolfsburg.de



___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Customizationfile Path on Windows

[Burghardt.Scholle]

Hi Simon,
You can use the start parameter “- - optionpath” in 
"%OSGEO4W_ROOT%\bin\qgis.bat”. Take a look at [1].

Regards
Burghardt

[1] 
https://qgis2015.wordpress.com/2015/05/17/how-to-make-a-qgis-on-a-stick-implementation/

Von: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag von 
ha...@gbd-consult.de
Gesendet: Montag, 5. März 2018 13:31
An: qgis-user@lists.osgeo.org
Betreff: [Qgis-user] Customizationfile Path on Windows

Dear QGIS-User,

in our office the last days a question came up: How can I configure the QGIS 
customizationfile path on Windows in order to get a directory with an 
*.ini-file for customization specifications such as I get on Linux like 
/home/user/.config/QGIS/QGIS2.conf? We want to prepare a few of *.ini-files and 
want to switch easy in a directory but not do some customization via registries.
Do you have any suggestions?

Best regards,
Simon Haufe
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Mac OS X testing for QGIS 3

[Burghardt.Scholle]

Hi John,

thank you for your nice reply. I'm just a QGIS user and work primarily under 
Linux and Windows. But for testing purposes, I frequently use my MacBook Air. 
So I will continue trying to get QGIS 3 running on Mac OS X.

Regards
Burghardt


> -Ursprüngliche Nachricht-
> Von: John Harrop [mailto:jchar...@gmail.com]
> Gesendet: Mittwoch, 14. Februar 2018 18:21
> An: Scholle, Burghardt (15-3 GIS)
> Cc: qgis-user@lists.osgeo.org
> Betreff: Re: [Qgis-user] Mac OS X testing for QGIS 3
> 
> Burghardt,
> 
> Thanks for the pointers, they seen much more up to date than the older
> ones pointed to by the QGIS web site.
> 
> I’ve been trying to build from the notes since you posted your suggestion
> and I see what you mean about the matplotlib problem. I forked the Mac OS
> X build notes on GitHub and started to work on them to see if I could get a
> working set for the matplotlib problems but not much luck.  However, I do
> seem to have it installed through pip or otherwise, so I worked past that step
> and have been trying to get CMake to configure a makefile but there are
> problems there as well.  I fixed a missing library by manually installing but 
> I’m
> now having problems with Qt5Positioning which is not being found.
> 
> its been a while since I was active in configuring build systems so I’m having
> to clean off the dust in my memories and learn newer versions of the
> systems.
> 
> I get the impression that not much has been going on with Mac OS X dev
> builds for at least a few months and quite a few dependancies have changed
> over that time.  I’ll keep working on this and hopefully there are some other
> GIS testers also interested in the Macs.
> 
> Let me know if you are still trying to get the Mac OS X dev build working or 
> if
> you have had success.
> 
> Regards,
> 
> John Harrop
> jchar...@gmail.com
> 
> 
> 
> > On Feb 8, 2018, at 10:22 PM, burghardt.scho...@stadt.wolfsburg.de wrote:
> >
> > Hi John,
> >
> > I believe there is no current complete dmg-file for QGIS3-dev. But you can
> use the excellent site under [1] to install QGIS3-dev using Homebrew.
> Unfortunately, there are problems with the matplotlib dependency at the
> moment (see [2]). Yersterday I've tried to install the current version but it
> failed.
> >
> > Even so I hope that my hints help.
> >
> > Regards
> > Burghardt
> >
> >
> > [1]
> > https://github.com/qgis/homebrew-
> qgisdev/blob/master/development/READM
> > E.md [2] https://github.com/qgis/homebrew-qgisdev/issues/50
> >
> >> -Ursprüngliche Nachricht-
> >> Von: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag
> >> von John Harrop
> >> Gesendet: Donnerstag, 8. Februar 2018 19:53
> >> An: qgis-user@lists.osgeo.org
> >> Betreff: [Qgis-user] Mac OS X testing for QGIS 3
> >>
> >> Hello,
> >>
> >> Is it possible to be involved in OS X testing of the QGIS 3 beta?
> >> There are parts of the web site that suggest it is, but I have not
> >> been able to find a web age for up to date downloads.
> >>
> >> Thanks,
> >>
> >> John Harrop
> >> jchar...@gmail.com
> >>
> >>
> >>
> >> ___
> >> Qgis-user mailing list
> >> Qgis-user@lists.osgeo.org
> >> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> >> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Mac OS X testing for QGIS 3

[Burghardt.Scholle]

Hi John,

I believe there is no current complete dmg-file for QGIS3-dev. But you can use 
the excellent site under [1] to install QGIS3-dev using Homebrew.  
Unfortunately, there are problems with the matplotlib dependency at the moment 
(see [2]). Yersterday I've tried to install the current version but it failed.

Even so I hope that my hints help.

Regards 
Burghardt


[1] https://github.com/qgis/homebrew-qgisdev/blob/master/development/README.md 
[2] https://github.com/qgis/homebrew-qgisdev/issues/50 

> -Ursprüngliche Nachricht-
> Von: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag von
> John Harrop
> Gesendet: Donnerstag, 8. Februar 2018 19:53
> An: qgis-user@lists.osgeo.org
> Betreff: [Qgis-user] Mac OS X testing for QGIS 3
> 
> Hello,
> 
> Is it possible to be involved in OS X testing of the QGIS 3 beta?  There are
> parts of the web site that suggest it is, but I have not been able to find a 
> web
> age for up to date downloads.
> 
> Thanks,
> 
> John Harrop
> jchar...@gmail.com
> 
> 
> 
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Field comments

[Burghardt.Scholle]

Hi Carlos,

of course, use the column "Alias" in the “fields” tab to specify a permanent 
comment.

Regards
Burghardt



Von: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag von Carlos 
Cerdán
Gesendet: Mittwoch, 22. November 2017 23:17
An: qgis-user@lists.osgeo.org
Betreff: Re: [Qgis-user] Field comments

Sorry. More information: I've tried it in QGIS 2.18.x under Ubuntu and Windows. 
I've also tried QGIS 2.99 in Windows 10. Nothing.

2017-11-22 17:14 GMT-05:00 Carlos Cerdán 
>:
Hi list:

Does anyone know how to make comments permanent in the fields of the attribute 
table? (see image on https://www.dropbox.com/s/uef2gs0g3qmp1g0/Fields.png?dl=0 )

When I open the properties of the layer and go to the "fields" tab, I can't 
make the comments recorded. I tried to put the layer in edit mode and enter 
comments with quotes, but nothing.

Maybe I'm using this feature the wrong way. Any suggestions?
Carlos Cerdan

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QGIS Overview Panel... is it used by anybody?

[Burghardt.Scholle]

Hi Richard,

basically I think an 'Overview Panel' is very useful, if you zoom in the map 
greatly. However, for a better use I wished more configuration options:
- define background Map which will be drawn with full extent for better 
orientation
- minimize or maximize the red rectangle to change map scale

In its present form the 'Overview Panel' is limited in use.

Regards
Burghardt

> -Ursprüngliche Nachricht-
> Von: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag von
> Richard Duivenvoorde
> Gesendet: Freitag, 13. Oktober 2017 09:40
> An: Qgis-user@lists.osgeo.org
> Betreff: [Qgis-user] QGIS Overview Panel... is it used by anybody?
> 
> Hi All,
> 
> When trying to change configuration of QGIS, I hit the 'Overview Panel'.
> 
> In all those years I use QGIS, I personally(!) never used it.
> 
> Do others use it actually, or is it maybe helpful in schools or beginner 
> classes?
> 
> Just wondering as it takes up 3 menu-items... :-)
> 
> Regards,
> 
> Richard Duivenvoorde
> 
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Can not install qgis-mapserver on CentOS 7

[Burghardt.Scholle]

Hi Julian,
in the past few weeks I have also experimented with CentOS 7 and QGIS /QGIS 
server. My experience has shown that manual compilation of the required 
software components / libraries under CentOS was necessary to get an efficient 
and productive work environment. I have proceeded as follows:

· Compile Proj4

· Compile GDAL

· Compile GEOS

· Compile PostGIS (if needed, you can take PostgreSQL from the 
repository http://yum.postgresql.org/repopackages.php)

· Compile GRASS (if needed)

· Compile QGIS Desktop / Server

After that you have a current running QGIS environment and can determine many 
settings by yourself.

By the way: the Docker proposal from Steve sounds very interesting.

Hope this helps
Burghardt

Von: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag von Julian 
Bogdani
Gesendet: Mittwoch, 12. April 2017 19:53
An: qgis-user@lists.osgeo.org
Betreff: [Qgis-user] Can not install qgis-mapserver on CentOS 7

Hello everybody,
I’m trying to setup a QGis server on a CentOS (7.3.1611) server, following the 
official guide: 
http://hub.qgis.org/projects/quantum-gis/wiki/QGIS_Server_Tutorial

I followed the instructions and added EPEL:
yum install epel-release

Then I added ELGIS:
rpm -Uvh http://elgis.argeo.org/repos/6/elgis-release-6-6_0.noarch.rpm

And finally tried to install qgis-mapserver:
yum install qgis-mapserver

But this last command did not work, because some dependencies were not met:

Error: Package: qgis-1.8.0-9_0.el6.x86_64 (elgis)
   Requires: libqwt.so.5()(64bit)
Error: Package: qgis-1.8.0-9_0.el6.x86_64 (elgis)
   Requires: libqwtpolar.so.0()(64bit)
Error: Package: mod_fcgid-2.3.9-4.el7.x86_64 (base)
   Requires: httpd-mmn = 20120211x8664
Error: Package: qgis-1.8.0-9_0.el6.x86_64 (elgis)
   Requires: libspatialindex.so.1()(64bit)
Error: Package: qgis-mapserver-1.8.0-9_0.el6.x86_64 (elgis)
   Requires: libspatialindex.so.1()(64bit)

Am I missing anything? Should I install these dependencies manually? Or should 
I install some other package before?

Any help would be much appreciated,

Thank you

-
Julian Bogdani
jbogd...@gmail.com
http://bradypus.net





___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Corporate Users

[Burghardt.Scholle]

Hi,

you’re right. There’re for example a 
"%OSGEO4W_ROOT%\bin\vcredist-2013-x64.exe". But after a normal QGIS install, 
this packages will be deleted (see 
"%OSGEO4W_ROOT%\etc\postinstall\msvcrt-2013.bat.done") and are no longer 
available. The msvc dll's alone do not help. They need to be registered.

Regards
Burghardt


Von: Régis Haubourg [mailto:regis.haubo...@gmail.com]
Gesendet: Montag, 7. November 2016 13:24
An: Scholle, Burghardt (15-3 GIS)
Cc: Bo Victor Thomsen; qgis-user@lists.osgeo.org
Betreff: Re: [Qgis-user] Corporate Users

Hi,
Post installing works, I had the case on one server where we forgot to install 
MSVC++ before unzipping QGIS.
I've also eard of some packaging msvc dll's inside qgis package, but I haven't 
tested that by myself

Cheers
Régis

2016-11-07 13:05 GMT+01:00 
>:
Hi Bo,

first - thank you for pointing us to your great instructions. I have another 
question about this. I often have the problem, that on a fresh Windows 
installation the Microsoft C++ Redistributable environment lacks. Does your 
setup routine consider this? And will the environment be possibly automatically 
post-installed?

Regards
Burghardt

> -Ursprüngliche Nachricht-
> Von: Qgis-user 
> [mailto:qgis-user-boun...@lists.osgeo.org]
>  Im Auftrag von
> Bo Victor Thomsen
> Gesendet: Samstag, 5. November 2016 19:30
> An: qgis-user@lists.osgeo.org
> Betreff: Re: [Qgis-user] Corporate Users
>
> Hi Richard -
>
> Be my guest, knock yourself out, go ahead - It's always nice if other people
> can use the work that was invested in this project ;-)
>
> I haven't too much time to spare the next month or two, so you have my full
> permission to write an article about this method. I can of course help you by
> "proof" reading the article before publishing if you find it necessary.
>
> And I agree fully with you about using an ini file based approach to save
> settings for Qgis :-)
>
> Regards
>
> Bo Victor
>
>
>
> Den 05/11/16 kl. 10:06 skrev Richard Duivenvoorde:
> > Bo: thanks for this great write up!
> >
> > Is it ok if you/I write a small article on 
> > blog.qgis.org or qgis.nl or
> > qgis.dk and point to the english version of your writeup?
> >
> > https://github.com/Frederikssund/Alternativ-QGIS-installation/blob/mas
> > ter/Readme%20-%20english.md
> >
> > I think a lot of organisations/windows system admins will be greatfull
> > to you!
> >
> > By the way, in my view the default storing mechanism of settings
> > should be ini file based anyway! I'll try to bring this up on the dev list 
> > again.
> >
> > Regards,
> >
> > Richard Duivenvoorde
> >
> > On 04-11-16 15:36, Bo Victor Thomsen wrote:
> >> We ( as in the municipality of Frederikssund, Denmark) has a medium
> >> size enterprise installation of Qgis 2.8 at around 100 local
> >> installations of Qgis 2.8 in a Windows-7 64 bit environment. There is
> >> no significant problems with this installation.
> >>
> >> The largest problem by far was to sift through a mountain sized heap
> >> of tab files from an older installation of MapInfo and determine
> >> which should be restructured, cleaned and  imported to our
> >> MS-SQLServer based database environment.
> >>
> >> In the near future - probably a month - We are doing a roll out of
> >> Qgis
> >> 2.18 to around 250 Windows workstations using this method:
> >>
> >> "https://github.com/Frederikssund/Alternativ-QGIS-installation;
> >> (don't worry about the Danish readme.md - there is 
> >> documentation in
> >> English too
> >> ;-)
> >>
> >> If you have a large amount of different layers / tables, I suggest
> >> you take a look at the "QLR Browser" plugin. This plugin provides an
> >> immense help to structure user access to a large number of layers:
> >>
> >> And of course: Use a database to store your data. Preferably
> >> Postgres/PostGIS (Open source and IMHO the most powerful spatial
> >> database), but MS-SQL Server or Oracle will do If you don't have a
> >> choice regarding database systems.
> >>
> >> Regards
> >>
> >> Bo Victor Thomsen
> >>
> >> GIS & Database specialist
> >>
> >> Municipality of Frederikssund
> >>
> >>
> >> Den 04/11/16 kl. 04:24 skrev Grant Boxer:
> >>> I am using QGIS in a single stand-alone situation and I was
> >>> wondering what examples there are of medium to large corporations
> >>> using QGIS as their GIS platform and what issues you need to be
> >>> aware of in large multi-user QGIS situations?
> >>>
> >>>
> >>>
> >>> Grant Boxer
> >>>
> >>> Perth, Western Australia
> >>>
> >>>
> >>>
> >>>
> >>>
> >>> ___
> >>> Qgis-user mailing list
> >>> Qgis-user@lists.osgeo.org
> >>> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> >>> 

Re: [Qgis-user] Corporate Users

[Burghardt.Scholle]

Hi Bo,

first - thank you for pointing us to your great instructions. I have another 
question about this. I often have the problem, that on a fresh Windows 
installation the Microsoft C++ Redistributable environment lacks. Does your 
setup routine consider this? And will the environment be possibly automatically 
post-installed?

Regards
Burghardt

> -Ursprüngliche Nachricht-
> Von: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag von
> Bo Victor Thomsen
> Gesendet: Samstag, 5. November 2016 19:30
> An: qgis-user@lists.osgeo.org
> Betreff: Re: [Qgis-user] Corporate Users
> 
> Hi Richard -
> 
> Be my guest, knock yourself out, go ahead - It's always nice if other people
> can use the work that was invested in this project ;-)
> 
> I haven't too much time to spare the next month or two, so you have my full
> permission to write an article about this method. I can of course help you by
> "proof" reading the article before publishing if you find it necessary.
> 
> And I agree fully with you about using an ini file based approach to save
> settings for Qgis :-)
> 
> Regards
> 
> Bo Victor
> 
> 
> 
> Den 05/11/16 kl. 10:06 skrev Richard Duivenvoorde:
> > Bo: thanks for this great write up!
> >
> > Is it ok if you/I write a small article on blog.qgis.org or qgis.nl or
> > qgis.dk and point to the english version of your writeup?
> >
> > https://github.com/Frederikssund/Alternativ-QGIS-installation/blob/mas
> > ter/Readme%20-%20english.md
> >
> > I think a lot of organisations/windows system admins will be greatfull
> > to you!
> >
> > By the way, in my view the default storing mechanism of settings
> > should be ini file based anyway! I'll try to bring this up on the dev list 
> > again.
> >
> > Regards,
> >
> > Richard Duivenvoorde
> >
> > On 04-11-16 15:36, Bo Victor Thomsen wrote:
> >> We ( as in the municipality of Frederikssund, Denmark) has a medium
> >> size enterprise installation of Qgis 2.8 at around 100 local
> >> installations of Qgis 2.8 in a Windows-7 64 bit environment. There is
> >> no significant problems with this installation.
> >>
> >> The largest problem by far was to sift through a mountain sized heap
> >> of tab files from an older installation of MapInfo and determine
> >> which should be restructured, cleaned and  imported to our
> >> MS-SQLServer based database environment.
> >>
> >> In the near future - probably a month - We are doing a roll out of
> >> Qgis
> >> 2.18 to around 250 Windows workstations using this method:
> >>
> >> "https://github.com/Frederikssund/Alternativ-QGIS-installation;
> >> (don't worry about the Danish readme.md - there is documentation in
> >> English too
> >> ;-)
> >>
> >> If you have a large amount of different layers / tables, I suggest
> >> you take a look at the "QLR Browser" plugin. This plugin provides an
> >> immense help to structure user access to a large number of layers:
> >>
> >> And of course: Use a database to store your data. Preferably
> >> Postgres/PostGIS (Open source and IMHO the most powerful spatial
> >> database), but MS-SQL Server or Oracle will do If you don't have a
> >> choice regarding database systems.
> >>
> >> Regards
> >>
> >> Bo Victor Thomsen
> >>
> >> GIS & Database specialist
> >>
> >> Municipality of Frederikssund
> >>
> >>
> >> Den 04/11/16 kl. 04:24 skrev Grant Boxer:
> >>> I am using QGIS in a single stand-alone situation and I was
> >>> wondering what examples there are of medium to large corporations
> >>> using QGIS as their GIS platform and what issues you need to be
> >>> aware of in large multi-user QGIS situations?
> >>>
> >>>
> >>>
> >>> Grant Boxer
> >>>
> >>> Perth, Western Australia
> >>>
> >>>
> >>>
> >>>
> >>>
> >>> ___
> >>> Qgis-user mailing list
> >>> Qgis-user@lists.osgeo.org
> >>> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> >>> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
> >>
> >>
> >> ___
> >> Qgis-user mailing list
> >> Qgis-user@lists.osgeo.org
> >> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> >> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
> >>
> > ___
> > Qgis-user mailing list
> > Qgis-user@lists.osgeo.org
> > List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> > Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
> 
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QGIS server: configuration of grid shift files for datum conversions

[Burghardt.Scholle]

Hi Andreas,

some time ago I had a similar problem in the UMN Mapserver. There I could solve 
it, in which I have supplemented the corresponding epsg entries by a further 
parameter: “+nadgrids=/usr/local/share/proj/”. This 
caused the data to be transformed “on the fly”. Hope this helps.

Greetings
Burghardt

Von: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag von 
Neumann, Andreas
Gesendet: Montag, 24. Oktober 2016 08:24
An: QGIS User List
Betreff: [Qgis-user] QGIS server: configuration of grid shift files for datum 
conversions


Hi,

I have to configure QGIS server to properly handle grid shift files. In 
Switzerland we need to offer "old" and "new" coordinates (different datums) at 
the same time with our services and the conversion needs to be done with grid 
shift files or tin based interpolation.

I know that I have to copy the CHENYX06a.gsb file to my proj lib, e.g. 
/usr/local/shar/proj  - but how can I make QGIS Server to actually use this 
file? I assume that I need to copy an additional config file or SRS/grid shift 
file combinations to QGIS server and/or specify an environment variable - right?

Are there any resources explaining how I can configure QGIS server to make use 
of these grid shift files?

Thank you for any pointers!

Andreas

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Style editor: Custom SVG fill issue: QGIS Tutorial

[Burghardt.Scholle]

Hi,

for me it works perfect (QGIS 2.16.3, Windows 64bit). I can use my own SVG's to 
produce custom filled symbols. Which QGIS version do you use?

Regards
Burghardt

> -Ursprüngliche Nachricht-
> Von: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag von
> Tim Bowden
> Gesendet: Freitag, 21. Oktober 2016 09:24
> An: qgis-user@lists.osgeo.org
> Betreff: Re: [Qgis-user] Style editor: Custom SVG fill issue: QGIS Tutorial
> 
> On Fri, 2016-10-21 at 06:53 +, burghardt.scho...@stadt.wolfsburg.de
> wrote:
> > Hi Tim,
> >
> > under "Settings -> Options -> System" you can define more SVG paths.
> > Please insert the path, in which your symbol is located.
> > Hope this helps.
> >
> > Regards,
> > Burghardt
> 
> Thanks, That worked when I added the path and selected the symbol that
> way, but selecting the symbol file using the file selection dialogue still 
> didn't
> work.  I take it that's a bug?
> 
> Regards,
> Tim Bowden
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Style editor: Custom SVG fill issue: QGIS Tutorial

[Burghardt.Scholle]

Hi Tim,

under "Settings -> Options -> System" you can define more SVG paths. Please 
insert the path, in which your symbol is located.
Hope this helps.

Regards,
Burghardt

> -Ursprüngliche Nachricht-
> Von: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag von
> Tim Bowden
> Gesendet: Donnerstag, 20. Oktober 2016 21:12
> An: qgis-user@lists.osgeo.org
> Betreff: [Qgis-user] Style editor: Custom SVG fill issue: QGIS Tutorial
> 
> I'm getting back to QGIS after a good few years away from doing anything
> 'spatial' related so I'm doing the tutorial to get up to speed with the latest
> (using version 2.16.3 on Ubuntu).
> 
> Section3.2.12 of the 'Testing' tutorial (not yet updated for 2.16 but easy
> enough to follow regardless) goes through creating and using a custom SVG
> symbol for the 'Landuse' layer. I've got my symbol created fine, but QGIS
> seems to be ignoring it when I try to load it.  I can use one of the QGIS
> supplied symbols no problems but I can't seem to get my custom symbol to
> load.
> 
> Any ideas?
> 
> Regards,
> Tim Bowden
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Qfield

[Burghardt.Scholle]

Hi Tyler,
both ☺ (i.e. http://ows.terrestris.de/osm/service? – thanks to terrestris GmbH 
& Co. KG).
However, I must admit if encrypted services are used, I have SSL-Problems 
outside the intranet with my self hosted custom WMS. The log file shows the 
following error message: “WMS: Download of capabilities failed: SSL handshake 
failed”. But I'm still near the beginning of my tests.

Regards
Burghardt

Von: Tyler Veinot [mailto:tylerkvei...@gmail.com]
Gesendet: Mittwoch, 21. September 2016 13:30
An: Scholle, Burghardt (15-3 GIS)
Cc: Erwan Conseil; QGIS User List
Betreff: Re: [Qgis-user] Qfield

Burghardt
What WMS services are you using, open data types served by OpenStreetMap and 
the like or self hosted custom WMS layers?
Tyler

On Wed, Sep 21, 2016 at 3:42 AM, 
>
 wrote:
Hi Laurent,
I've just make my first steps with QField last weekend and don't have any 
Problems. I use QField under Android. There is a basic documentation under [1]. 
I prepare the data in QGIS 2.16 (!) and use the "Offline Editing plugin". It 
works fine and quite fast. WMS-Services are also working.

Regards
Burghardt

[http://www.qfield.org/docs/]


> -Ursprüngliche Nachricht-
> Von: Qgis-user 
> [mailto:qgis-user-boun...@lists.osgeo.org]
>  Im Auftrag von
> Erwan Conseil
> Gesendet: Dienstag, 20. September 2016 14:46
> An: Qgis-user@lists.osgeo.org
> Betreff: [Qgis-user] Qfield
>
> Hi
> Is there somebody who as already used Qfield ?
> I have tried to transfert maps and forms from Qgis and I did'nt succeed
> Do you know a tutorial for my  basic pb?
> Thanks
> Laurent
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Qfield

[Burghardt.Scholle]

Hi Laurent,
I've just make my first steps with QField last weekend and don't have any 
Problems. I use QField under Android. There is a basic documentation under [1]. 
I prepare the data in QGIS 2.16 (!) and use the "Offline Editing plugin". It 
works fine and quite fast. WMS-Services are also working.

Regards
Burghardt

[http://www.qfield.org/docs/]


> -Ursprüngliche Nachricht-
> Von: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag von
> Erwan Conseil
> Gesendet: Dienstag, 20. September 2016 14:46
> An: Qgis-user@lists.osgeo.org
> Betreff: [Qgis-user] Qfield
> 
> Hi
> Is there somebody who as already used Qfield ?
> I have tried to transfert maps and forms from Qgis and I did'nt succeed
> Do you know a tutorial for my  basic pb?
> Thanks
> Laurent
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] How set default as "show all features"

[Burghardt.Scholle]

Hi Andrea,
under "Settings -> Options -> Data Sources -> Feature attributes and table -> 
Attribute table behavior" you can change the default setting to "Show all 
features".

Hope this helps.

Regards 
Burghardt

> -Ursprüngliche Nachricht-
> Von: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag von
> Andrea Peri
> Gesendet: Donnerstag, 11. August 2016 16:11
> An: qgis-user
> Betreff: [Qgis-user] How set default as "show all features"
> 
> Hi,
> When start qgis is always starting with option "show feature visible on map"
> in attribute windows.
> I know is possible to change it to "show all features".
> But when I close qgis and restart it it return to original setting "show 
> feature
> visible on map".
> 
> The option "show feature visible on map".
> 
> Too much times our users give us some datasets where there is hidden
> wrong records because outside from visibility box.
> 
> These happened because our users forgot to set the "show all features"
> and so dont see the wrong records to delete.
> :(
> 
> There is a configure solution to set qgis to start always with option "show 
> all
> features" ?
> 
> Thx.
> 
> --
> -
> Andrea Peri
> . . . . . . . . .
> qwerty àèìòù
> -
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Problems with wfs client

[Burghardt.Scholle]

Hi,

the WFS works for me too. Tested on QGIS 2.16 and 2.14.4 (LTS) on Windows and 
2.14.4 (LTS) on Linux (Ubuntu 14.04). I loaded the layer “gemarkungen_rlp”, 
“gemeinden_rlp” and “landkreise_rlp”.

Regards
Burghardt

Von: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag von 
Neumann, Andreas
Gesendet: Freitag, 29. Juli 2016 11:47
An: Michael Werner Maur
Cc: qgis-user@lists.osgeo.org
Betreff: Re: [Qgis-user] Problems with wfs client


Hi Michael,

The WFS works fine for me. Tested on QGIS 2.16 on Windows. Tested by loading 
layer "gemeinde_rlp".

Note that from the URL you provided I only used the part up to the question 
mark (?) - not sure how sensitive QGIS is about URLs ...

Greetings,

Andreas

On 2016-07-29 11:20, Michael Werner Maur wrote:
Hello,

I'm using QGis 2.16.0 on a Ubuntu 16.04. I want to use the following WFS, that 
worked fine in the older QGis Versions :

http://geo5.service24.rlp.de/wfs/verwaltungsgrenzen_rp.fcgi?=GetCapabilities=1.1.0=WFS

WhenI try to connect it in the QGis WFS client, the result is the error 
"enexpected end of file". What do I do in the wrong way ?


Mit freundlichen Grüßen
Im Auftrag
Michael Maur

--
Michael Maur

Zentrale Stelle für Geodateninfrastruktur in Rheinland-Pfalz

Von-Kuhl-Straße 49
56070 Koblenz
Telefon 0261 492-152
Telefax 0261 492-492
michael.m...@vermkv.rlp.de
www.geoportal.rlp.de


[http://www.lvermgeo.rlp.de/fileadmin/templates/neu/images/Signatur_LVermGeo.jpg]


___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user



___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Saving/Loading styles in Postgis

[Burghardt.Scholle]

Hi Andreas,

To save the layer styles in a PG table is a cool feature ☺. I have no problems 
to save the table with a connection based on host/database.

A hint from me: QGIS stores the style-information with the data type “xml”. For 
me this made problems when exporting / importing this data. By default, the 
XMLPARSER from postgresql works with the "CONTENT" option. When importing a 
dump file from the “layer styles”-table you get an error message: “ERROR: 
invalid XML content”. To prevent this, you need to edit the dump file. Before 
the insert / copy command to insert the layer styles records you must add the 
statement “SET xmloption TO DOCUMENT;”.

Regards
Burghardt

Von: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag von 
Andreas Neumann
Gesendet: Donnerstag, 28. Juli 2016 18:14
An: DelazJ
Cc: QGIS User List
Betreff: Re: [Qgis-user] Saving/Loading styles in Postgis

Strange. I can see the empty layer_styles table in my public schema. But saving 
fails. Maybe it fails because my PG connection is based on a service definition 
and not on host/database?
On July 28, 2016 6:08:01 PM CEST, DelazJ 
> wrote:
Hi,
Andreas,  Styles are indeed saved in the public schema, in a table named 
"layer_styles". I had never created such a table so I assume it's created by 
QGIS.
Just made a test and rename my current "layer_styles" table. Then I 
successfully save a new layer style in PG from QGIS 2.16: a new table 
"layer_styles" has automatically been created in the public schema.
HTH,
Harrissou

2016-07-28 17:38 GMT+02:00 Neumann, Andreas 
>:

Hi,

I have never used the Saving/Loading of styles in Postgis (see 
http://docs.qgis.org/2.14/en/docs/user_manual/working_with_vector/vector_properties.html#storing-style-in-a-file-or-a-database)

Do I have to create a special styling table for it to enable this?

Because when I try to save it (QGIS 2.16) I get an error message along the 
lines that my user may not have permissions to save the style. However, I am 
trying to save the style with a user that has full administrator rights in 
Postgis.

In what schema and table are the styles stored? I assume in the public schema. 
Will QGIS automatically create a styling table or do I have to create one 
myself?

Thank you for any hints!

Andreas




___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user


--
Diese Nachricht wurde von meinem Android-Mobiltelefon mit K-9 Mail gesendet.
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Shapefile with file .cpg(codepage)

[Burghardt.Scholle]

Hi,
I would say that QGIS does not use the .cpg file. But you have the possibility 
to make the correct encoding in the layer properties under "General -> Layer 
info -> Data source encoding".

Regards
Burghardt


> -Ursprüngliche Nachricht-
> Von: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag von
> Andrea Peri
> Gesendet: Donnerstag, 7. Juli 2016 12:16
> An: qgis-user
> Betreff: [Qgis-user] Shapefile with file .cpg(codepage)
> 
> Hi,
> I have some shapefiles with an extra file having extension .cpg.
> The .cpg extension is a optional extension for declaration of Code-Page.
> Is this file knowed and supported from QGIS 2.14. ?
> 
> I don't know if the qgis when loading a shapefile is using the ogr or instead 
> is
> using an own shapefile provider, but however I don't know if gdal is knowing
> and using this .cpg file.
> :)
> 
> 
> Thx,
> 
> --
> -
> Andrea Peri
> . . . . . . . . .
> qwerty àèìòù
> -
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Label Formatting - Wrap on character with "wordwrap"

[Burghardt.Scholle]

Hi Damien,
thanks for the feedback. 
Unfortunately, your suggestion does not work. I have already tried many 
variants, but I had no success.

Burghardt

Von: damien stephens [mailto:damien.steph...@gmail.com] 
Gesendet: Mittwoch, 8. Juni 2016 12:56
An: Scholle, Burghardt (15-3 GIS); qgis-user@lists.osgeo.org
Betreff: Re: [Qgis-user] Label Formatting - Wrap on character with "wordwrap"

Try something along the lines of
Case when length ("name") < 15 then "name" else wordwrap ("name",15) end

I havent got my computer with me, but might be a work around.

On Mon, 6 Jun 2016, 6:40 PM  wrote:
Hi,

I created a bug report for this issue: http://hub.qgis.org/issues/14963

Regards
Burghardt

> -Ursprüngliche Nachricht-
> Von: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag von
> burghardt.scho...@stadt.wolfsburg.de
> Gesendet: Mittwoch, 18. Mai 2016 13:10
> An: qgis-user@lists.osgeo.org
> Betreff: [Qgis-user] Label Formatting - Wrap on character with "wordwrap"
>
> Hi all,
>
> my System: Ubuntu 14.04, QGIS 2.8.7 / 2.14.2
>
> I want label a layer with long attribute values. The label should wrap after a
> number of characters. For this I use the function "wordwarp" in the
> expression string builder (e.g. "wordwrap("name", 15)"). In the output
> preview the wordwrap is displayed correctly. But in the map all the words
> with less than (e.g.) 15 characters will be hidden and the wordwrap will not
> be displayed.
> Am I doing something wrong? Can anyone give me a hint?
>
> Best regards
> Burghardt
>
> ***
>
> Stadt Wolfsburg
> Geschäftsbereich IT - 15-3 GIS
> Rathaus E, Zi. E403, Porschestraße 47A, D-38440 Wolfsburg Tel +49 5361 28-
> 2531 Fax +49 5361 28-1765 mailto:burghardt.scho...@stadt.wolfsburg.de
>
>
>
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Label Formatting - Wrap on character with "wordwrap"

[Burghardt.Scholle]

Hi,

I created a bug report for this issue: http://hub.qgis.org/issues/14963

Regards
Burghardt

> -Ursprüngliche Nachricht-
> Von: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag von
> burghardt.scho...@stadt.wolfsburg.de
> Gesendet: Mittwoch, 18. Mai 2016 13:10
> An: qgis-user@lists.osgeo.org
> Betreff: [Qgis-user] Label Formatting - Wrap on character with "wordwrap"
> 
> Hi all,
> 
> my System: Ubuntu 14.04, QGIS 2.8.7 / 2.14.2
> 
> I want label a layer with long attribute values. The label should wrap after a
> number of characters. For this I use the function "wordwarp" in the
> expression string builder (e.g. "wordwrap("name", 15)"). In the output
> preview the wordwrap is displayed correctly. But in the map all the words
> with less than (e.g.) 15 characters will be hidden and the wordwrap will not
> be displayed.
> Am I doing something wrong? Can anyone give me a hint?
> 
> Best regards
> Burghardt
> 
> ***
> 
> Stadt Wolfsburg
> Geschäftsbereich IT - 15-3 GIS
> Rathaus E, Zi. E403, Porschestraße 47A, D-38440 Wolfsburg Tel +49 5361 28-
> 2531 Fax +49 5361 28-1765 mailto:burghardt.scho...@stadt.wolfsburg.de
> 
> 
> 
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

[Qgis-user] Label Formatting - Wrap on character with "wordwrap"

[Burghardt.Scholle]

Hi all,

my System: Ubuntu 14.04, QGIS 2.8.7 / 2.14.2

I want label a layer with long attribute values. The label should wrap after a 
number of characters. For this I use the function "wordwarp" in the expression 
string builder (e.g. "wordwrap("name", 15)"). In the output preview the 
wordwrap is displayed correctly. But in the map all the words with less than 
(e.g.) 15 characters will be hidden and the wordwrap will not be displayed.
Am I doing something wrong? Can anyone give me a hint?

Best regards
Burghardt

***

Stadt Wolfsburg
Geschäftsbereich IT - 15-3 GIS
Rathaus E, Zi. E403, Porschestraße 47A, D-38440 Wolfsburg
Tel +49 5361 28-2531
Fax +49 5361 28-1765
mailto:burghardt.scho...@stadt.wolfsburg.de



___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QGIS Server - Export to PDF - Legend

[Burghardt.Scholle]

Hello,

I created a bug report for this issue: http://hub.qgis.org/issues/14790

Regards 
Burghardt

> -Ursprüngliche Nachricht-
> Von: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag von
> burghardt.scho...@stadt.wolfsburg.de
> Gesendet: Dienstag, 3. Mai 2016 12:41
> An: boistea...@observatoire-environnement.org; qgis-user@lists.osgeo.org
> Betreff: Re: [Qgis-user] QGIS Server - Export to PDF - Legend
> 
> Hi ,
> 
> I don't display the legend of the WMS. A merge of different legends
> between WMS and other layer's does not take place in my case.
> 
> Greetings
> Burghardt
> 
> 
> > -Ursprüngliche Nachricht-
> > Von: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag
> > von Nicolas Boisteault
> > Gesendet: Dienstag, 3. Mai 2016 11:09
> > An: qgis-user@lists.osgeo.org
> > Betreff: Re: [Qgis-user] QGIS Server - Export to PDF - Legend
> >
> > It seems like a bug. I guess Qgis Server can't merge WMS legends with
> > other layer's legend.
> >
> > Nicolas BOISTEAULT
> > Développeur Web
> > Observatoire Régional de l'Environnement Téléport 4 Antarès - BP 50163
> > -
> > 86962 Futuroscope Chasseneuil Cedex Tél : 05 49 49 71 18 Le 03/05/2016
> > 10:47, burghardt.scho...@stadt.wolfsburg.de a écrit :
> > > Hi all,
> > >
> > > my System: Ubuntu 14.04, qgis-server 2.14.1 / 2.14.2
> > >
> > > My QGIS project contains a wms layer from UMN mapserver and
> > > different
> > shapefiles (Polygon, Line, Point). My print template contains the map
> > and a legend for the shapefiles. If I turn on the wms layer, the
> > export to PDF does not work. I get an Apache 500-error. If I turn off
> > the wms layer, the export to PDF works fine.
> > > Well, if I now turn on the wms layer and remove the legend only for
> > > the
> > shapefiles with line- and point-geometry from the print template, the
> > export to PDF works fine also. The legend of shapefiles with polygons
> > is always exported to PDF. Is this a bug? Can anyone help me?
> > >
> > > BTW: I tried different wms layer and had always the same problem.
> > >
> > > Thanks in advance and best regards
> > > Burghardt
> > >
> > >
> > > ***
> > >
> > > Stadt Wolfsburg
> > > Geschäftsbereich IT - 15-3 GIS
> > > Rathaus E, Zi. E403, Porschestraße 47A, D-38440 Wolfsburg Tel +49
> > > 5361
> > > 28-2531 Fax +49 5361 28-1765
> > > mailto:burghardt.scho...@stadt.wolfsburg.de
> > >
> > >
> > >
> > > ___
> > > Qgis-user mailing list
> > > Qgis-user@lists.osgeo.org
> > > List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> > > Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
> >
> > ___
> > Qgis-user mailing list
> > Qgis-user@lists.osgeo.org
> > List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> > Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QGIS Server - Export to PDF - Legend

[Burghardt.Scholle]

Hi ,

I don't display the legend of the WMS. A merge of different legends between WMS 
and other layer's does not take place in my case.

Greetings
Burghardt


> -Ursprüngliche Nachricht-
> Von: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag von
> Nicolas Boisteault
> Gesendet: Dienstag, 3. Mai 2016 11:09
> An: qgis-user@lists.osgeo.org
> Betreff: Re: [Qgis-user] QGIS Server - Export to PDF - Legend
> 
> It seems like a bug. I guess Qgis Server can't merge WMS legends with other
> layer's legend.
> 
> Nicolas BOISTEAULT
> Développeur Web
> Observatoire Régional de l'Environnement Téléport 4 Antarès - BP 50163 -
> 86962 Futuroscope Chasseneuil Cedex Tél : 05 49 49 71 18 Le 03/05/2016
> 10:47, burghardt.scho...@stadt.wolfsburg.de a écrit :
> > Hi all,
> >
> > my System: Ubuntu 14.04, qgis-server 2.14.1 / 2.14.2
> >
> > My QGIS project contains a wms layer from UMN mapserver and different
> shapefiles (Polygon, Line, Point). My print template contains the map and a
> legend for the shapefiles. If I turn on the wms layer, the export to PDF does
> not work. I get an Apache 500-error. If I turn off the wms layer, the export 
> to
> PDF works fine.
> > Well, if I now turn on the wms layer and remove the legend only for the
> shapefiles with line- and point-geometry from the print template, the export
> to PDF works fine also. The legend of shapefiles with polygons is always
> exported to PDF. Is this a bug? Can anyone help me?
> >
> > BTW: I tried different wms layer and had always the same problem.
> >
> > Thanks in advance and best regards
> > Burghardt
> >
> >
> > ***
> >
> > Stadt Wolfsburg
> > Geschäftsbereich IT - 15-3 GIS
> > Rathaus E, Zi. E403, Porschestraße 47A, D-38440 Wolfsburg Tel +49 5361
> > 28-2531 Fax +49 5361 28-1765
> > mailto:burghardt.scho...@stadt.wolfsburg.de
> >
> >
> >
> > ___
> > Qgis-user mailing list
> > Qgis-user@lists.osgeo.org
> > List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> > Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
> 
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

[Qgis-user] QGIS Server - Export to PDF - Legend

[Burghardt.Scholle]

Hi all,

my System: Ubuntu 14.04, qgis-server 2.14.1 / 2.14.2

My QGIS project contains a wms layer from UMN mapserver and different 
shapefiles (Polygon, Line, Point). My print template contains the map and a 
legend for the shapefiles. If I turn on the wms layer, the export to PDF does 
not work. I get an Apache 500-error. If I turn off the wms layer, the export to 
PDF works fine.
Well, if I now turn on the wms layer and remove the legend only for the 
shapefiles with line- and point-geometry from the print template, the export to 
PDF works fine also. The legend of shapefiles with polygons is always exported 
to PDF. Is this a bug? Can anyone help me?

BTW: I tried different wms layer and had always the same problem.

Thanks in advance and best regards
Burghardt


***

Stadt Wolfsburg
Geschäftsbereich IT - 15-3 GIS
Rathaus E, Zi. E403, Porschestraße 47A, D-38440 Wolfsburg
Tel +49 5361 28-2531
Fax +49 5361 28-1765
mailto:burghardt.scho...@stadt.wolfsburg.de



___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QGIS Server - Export to PDF graphics

[Burghardt.Scholle]

Hi Bernhard,

I'm excited - your suggestion works perfectly. Thank you very much.

Burghardt


> -Ursprüngliche Nachricht-
> Von: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag von
> Bernhard Ströbl
> Gesendet: Freitag, 29. April 2016 10:04
> An: qgis-user@lists.osgeo.org
> Betreff: Re: [Qgis-user] QGIS Server - Export to PDF graphics
> 
> just an idea: Do not load the images from the file system but from a web
> server via URL (can be the same server QGIS server is running on)
> 
> Bernhard
> 
> Am 29.04.2016 um 09:49 schrieb burghardt.scho...@stadt.wolfsburg.de:
> > Hi all,
> >
> > my System: Ubuntu 14.04, qgis-server 2.14.1
> >
> > I've created a print template in my QGIS-Project. The legend contains
> > several image files (logos etc.). An export to PDF from the Composer
> > is working properly. But if I use the print function in QGIS Server
> > using the QGIS WebClient or the OL3 Mobile Viewer, the image files are
> > only sometimes exported to PDF. The other contents of the map / legend
> > are shown reliably. I have already tried several graphic formats (png,
> > jpg etc.). Am I doing something wrong? Perhaps someone can give me a
> > hint. Thanks in advance
> >
> > Regards
> > Burghardt
> >
> > ***
> >
> > Stadt Wolfsburg
> > Geschäftsbereich IT - 15-3 GIS
> > Rathaus E, Zi. E403, Porschestraße 47A, D-38440 Wolfsburg Tel +49 5361
> > 28-2531 Fax +49 5361 28-1765
> > mailto:burghardt.scho...@stadt.wolfsburg.de
> >
> >
> >
> > ___
> > Qgis-user mailing list
> > Qgis-user@lists.osgeo.org
> > List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> > Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
> >
> 
> 
> 
> __ Information from ESET Mail Security, version of virus signature
> database 13410 (20160429) __
> 
> The message was checked by ESET Mail Security.
> http://www.eset.com
> 
> 
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

[Qgis-user] QGIS Server - Export to PDF graphics

[Burghardt.Scholle]

Hi all,

my System: Ubuntu 14.04, qgis-server 2.14.1

I've created a print template in my QGIS-Project. The legend contains several 
image files (logos etc.). An export to PDF from the Composer is working 
properly. But if I use the print function in QGIS Server using the QGIS 
WebClient or the OL3 Mobile Viewer, the image files are only sometimes exported 
to PDF. The other contents of the map / legend are shown reliably. I have 
already tried several graphic formats (png, jpg etc.). Am I doing something 
wrong? Perhaps someone can give me a hint. Thanks in advance

Regards
Burghardt

***

Stadt Wolfsburg
Geschäftsbereich IT - 15-3 GIS
Rathaus E, Zi. E403, Porschestraße 47A, D-38440 Wolfsburg
Tel +49 5361 28-2531
Fax +49 5361 28-1765
mailto:burghardt.scho...@stadt.wolfsburg.de



___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QGIS Webclient - "shortname"-Tag

[Burghardt.Scholle]

Hi,

this was also my level of information. I wanted not to offend with my statement 
that the web client is no longer being developed. I just wanted to give a 
well-meant hint :-)

Regards,
Burghardt

Von: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag von 
Neumann, Andreas
Gesendet: Freitag, 15. April 2016 12:32
An: Otto Dassau
Cc: qgis-user@lists.osgeo.org
Betreff: Re: [Qgis-user] QGIS Webclient - "shortname"-Tag


Hi,

There will be a start-workshop next week (Monday). It has been decided to 
develop QWCII from scratch and use ReactJS and OL3. It will be a while until it 
reaches feature parity with QWCI and the OL3-mobile viewer.

So - until then there will still be some development on QWC I - but most likely 
no big things.

Greetings,

Andreas

On 2016-04-15 12:20, Otto Dassau wrote:
Hi,

AFAIK there are plans for a QWC II, but it is unclear when it will be
"released" as official successor. And I don't know either, if any concrete
development has already started or if there is a roadmap available. Currently
it seems to be a lot of testing and playing around with several solutions
and looking for funding - is that correct?

So to me QWC I is still alive and people develope on it.

Regards,
Otto

Am Fri, 15 Apr 2016 11:29:09 +0200
schrieb Nicolas Boisteault 
>:


Hi,

QGIS Webclient is still developed. See activity here :
https://github.com/qgis/QGIS-Web-Client/commits/master

Nicolas BOISTEAULT
Développeur Web
Observatoire Régional de l'Environnement
Téléport 4 Antarès - BP 50163 - 86962 Futuroscope Chasseneuil Cedex
Tél : 05 49 49 71 18
Le 15/04/2016 11:18, 
burghardt.scho...@stadt.wolfsburg.de
 a écrit :
Hi,

since QGIS WebClient is no longer being developed, I would like to point
out a small workaround. Current QGIS versions use the tag ...
 in the QGIS project file. If you load a data source
multiple times, the shortname remains the same. Thus the wcl has
difficulties and does not show the affected layer. If you delete the
shortname in a text editor, the layers are drawn again.

Hope this helps someone else too.

Regards,
Burghardt

***

Stadt Wolfsburg
Geschäftsbereich IT - 15-3 GIS
Rathaus E, Zi. E403, Porschestraße 47A, D-38440 Wolfsburg
Tel +49 5361 28-2531
Fax +49 5361 28-1765
mailto:burghardt.scho...@stadt.wolfsburg.de

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user



___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

[Qgis-user] QGIS Webclient - "shortname"-Tag

[Burghardt.Scholle]

Hi,

since QGIS WebClient is no longer being developed, I would like to point out a 
small workaround. Current QGIS versions use the tag ...  
in the QGIS project file. If you load a data source multiple times, the 
shortname remains the same. Thus the wcl has difficulties and does not show the 
affected layer. If you delete the shortname in a text editor, the layers are 
drawn again.

Hope this helps someone else too.

Regards,
Burghardt

***

Stadt Wolfsburg
Geschäftsbereich IT - 15-3 GIS
Rathaus E, Zi. E403, Porschestraße 47A, D-38440 Wolfsburg
Tel +49 5361 28-2531
Fax +49 5361 28-1765
mailto:burghardt.scho...@stadt.wolfsburg.de



___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] how to get rid of points and only show labels?

[Burghardt.Scholle]

Is only there for Categorised or Graduated

Chris Berens, GISc
www.mapland.co.za
+27 (0)82 567 9322

On 8 December 2015 at 09:50, 
>
 wrote:
Hi Andreas,

hm, in which QGIS-Version you have made this screenshot :-)? I work with QGIS 
2.12.1, where it can't find that option button.

Burghardt



-Ursprüngliche Nachricht-
Von: Qgis-user 
[mailto:qgis-user-boun...@lists.osgeo.org]
 Im Auftrag von Andreas Neumann
Gesendet: Dienstag, 8. Dezember 2015 08:20
An: qgis-user@lists.osgeo.org
Betreff: Re: [Qgis-user] how to get rid of points and only show labels?

Hi Bob,

It is much easier - you don't have to fuss around with zero size or 
transparency.

Just uncheck the "Symbol" checkbox and your symbol will disappear. See attached 
screenshot.

Andreas

On 08.12.2015 00:17, Donovan Cameron wrote:
> Yes, one way can be done with a style trick by setting the size of the
> point symbol to 0.
>
>
>
>
> Donovan
>
>
>
> On 07/12/15 04:09 PM, Basques, Bob (CI-StPaul) wrote:
>> All,
>>
>> What should I even be looking for in the user manual as far as a key
>> word to search on?
>>
>> I want to get rid of (make disappear in QGIS) the points I’m
>> labeling.  I have eat label working just fine, but I want to not
>> display the point.  Do I need to fake the styling to do this, or??
>>
>> Thanks
>>
>> bobb
>>
>>
>>
>> ___
>> Qgis-user mailing list
>> Qgis-user@lists.osgeo.org
>> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
>> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
>

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] how to get rid of points and only show labels?

[Burghardt.Scholle]

Hi,

It may be that this checkbox is only available at certain renderers - I think i 
tested with the rule-based renderer.

I think it is around since a couple of versions. On Windows, the symbol is more 
on the left side - not centered in the symbol dialog.

Andreas

On 08.12.2015 08:50, burghardt.scho...@stadt.wolfsburg.de wrote:
> Hi Andreas,
>
> hm, in which QGIS-Version you have made this screenshot :-)? I work with QGIS 
> 2.12.1, where it can't find that option button.
>
> Burghardt
>
>
>
> -Ursprüngliche Nachricht-
> Von: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag 
> von Andreas Neumann
> Gesendet: Dienstag, 8. Dezember 2015 08:20
> An: qgis-user@lists.osgeo.org
> Betreff: Re: [Qgis-user] how to get rid of points and only show labels?
>
> Hi Bob,
>
> It is much easier - you don't have to fuss around with zero size or 
> transparency.
>
> Just uncheck the "Symbol" checkbox and your symbol will disappear. See 
> attached screenshot.
>
> Andreas
>
> On 08.12.2015 00:17, Donovan Cameron wrote:
>> Yes, one way can be done with a style trick by setting the size of 
>> the point symbol to 0.
>>
>>
>>
>>
>> Donovan
>>
>>
>>
>> On 07/12/15 04:09 PM, Basques, Bob (CI-StPaul) wrote:
>>> All,
>>>
>>> What should I even be looking for in the user manual as far as a key 
>>> word to search on?
>>>
>>> I want to get rid of (make disappear in QGIS) the points I’m 
>>> labeling.  I have eat label working just fine, but I want to not 
>>> display the point.  Do I need to fake the styling to do this, or??
>>>
>>> Thanks
>>>
>>> bobb
>>>
>>>
>>>
>>> ___
>>> Qgis-user mailing list
>>> Qgis-user@lists.osgeo.org
>>> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
>>> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] how to get rid of points and only show labels?

[Burghardt.Scholle]

Hi Andreas,

hm, in which QGIS-Version you have made this screenshot :-)? I work with QGIS 
2.12.1, where it can't find that option button.

Burghardt



-Ursprüngliche Nachricht-
Von: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag von 
Andreas Neumann
Gesendet: Dienstag, 8. Dezember 2015 08:20
An: qgis-user@lists.osgeo.org
Betreff: Re: [Qgis-user] how to get rid of points and only show labels?

Hi Bob,

It is much easier - you don't have to fuss around with zero size or 
transparency.

Just uncheck the "Symbol" checkbox and your symbol will disappear. See attached 
screenshot.

Andreas

On 08.12.2015 00:17, Donovan Cameron wrote:
> Yes, one way can be done with a style trick by setting the size of the 
> point symbol to 0.
>
>
>
>
> Donovan
>
>
>
> On 07/12/15 04:09 PM, Basques, Bob (CI-StPaul) wrote:
>> All,
>>
>> What should I even be looking for in the user manual as far as a key 
>> word to search on?
>>
>> I want to get rid of (make disappear in QGIS) the points I’m 
>> labeling.  I have eat label working just fine, but I want to not 
>> display the point.  Do I need to fake the styling to do this, or??
>>
>> Thanks
>>
>> bobb
>>
>>
>>
>> ___
>> Qgis-user mailing list
>> Qgis-user@lists.osgeo.org
>> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
>> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
>

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Problems with Qgis Server 2.12

[Burghardt.Scholle]

Sorry - I've overlooked an error in my apache config. Now everything works fine 
and the error message in the Apache log no longer appears.

Burghardt

Von: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag von 
burghardt.scho...@stadt.wolfsburg.de
Gesendet: Mittwoch, 18. November 2015 09:58
An: qgis-user@lists.osgeo.org
Betreff: Re: [Qgis-user] Problems with Qgis Server 2.12

Hi Henrik,

could you please explain how and where you have set the variable 
QGIS_AUTH_DB_DIR_PATH? I have set the variable in both the "/etc/environment" 
(for QGIS Desktop) as well as in my vhost file 'FcgidInitialEnv 
QGIS_AUTH_DB_DIR_PATH "/usr/local/share/qgis" '. QGIS Desktop creates the 
'qgis-auth.db' at the first start. But I still get the Apache message "ERROR: 
Auth db directory path could not be created". The directory and the db-file are 
*writeable* by Server's FCGI process user. What am I doing wrong?

Best regards
Burghardt



Von: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag von Henrik 
Uggla
Gesendet: Mittwoch, 28. Oktober 2015 14:38
An: Larry Shaffer
Cc: qgis-user
Betreff: Re: [Qgis-user] Problems with Qgis Server 2.12


I tried to set QGIS_AUTH_DB_DIR_PATH and the error message in the Apache log 
disappeared. I still got the "WMS configuration error" message though. It 
turned out to be the map parameter. In 2.8 you did not have to give the map 
parameter when there were only one .qgs-file was present. In 2.12 it is 
obviously mandatory. Thanks for your input!



/Henrik




Från: la...@shafferinteractive.com 
> för Larry 
Shaffer >
Skickat: den 27 oktober 2015 19:22
Till: Henrik Uggla
Kopia: Andreas Neumann; qgis-user
Ämne: Re: [Qgis-user] Problems with Qgis Server 2.12

Hi Henrik,

This is due to the new authentication system in 2.12 [0], and the support I 
added to Server. When running Server, projects loaded that contain an 
authentication configuration (instead of clear text username/password) for 
accessing a secured resource, e.g. WMS using Basic Auth and HTTPS, need to be 
able to access the new 'qgis-auth.db'.

The auth configurations are encrypted using a master password and stored in the 
qgis-auth.db, which by default is located at ~/.qgis2/qgis-auth.db for a 
desktop QGIS user. To enable Server support, I added two environment variables 
to overcome the problems associated with automatically loading projects [1], 
which are not yet fully documented:

* QGIS_AUTH_DB_DIR_PATH - Directory where an existing qgis-auth.db is located 
or created if not present. This directory needs to be *writeable* by Server's 
FCGI process user (which may differ from Apache's).

* QGIS_AUTH_PASSWORD_FILE - File path to file with master password as first 
line. This is similar to password files used by database servers. The env 
variable is read during QGIS startup, then removed from the env variables 
space, so it is not available later on to the FCGI process or any Server 
plugins. Since all auth configurations are encrypted, a master password is 
required to access the qgis-auth.db, if a loaded project uses auth configs 
stored in the qgis-auth.db.

What you have found is possibly a bug: the QGIS_AUTH_DB_DIR_PATH is now 
required to start Server, even if no loaded project make use of the new auth 
system. This is not really a bug if one considers the auth system setup 
mandatory from 2.12+, like it is on Desktop. At the minimum, a 
missing/non-writeable qgis-auth.db directory should throw a warning and not an 
error, allowing Server to launch.

Please try setting QGIS_AUTH_DB_DIR_PATH to a directory writeable by the 
Server's FCGI process user and see if Server starts normally. Then check that 
qgis-auth.db is created in the directory.

Here is how to set the env variables for the FCGI process in Apache [2,3]. 
Note, setting them at the Apache process level will not work.


[0] 
https://github.com/dakcarto/QGIS-Enhancement-Proposals/blob/auth-system/qep-14-authentication-system.rst
[1] https://github.com/qgis/QGIS/blob/master/src/server/qgsserver.cpp#L359-L362
[2] https://httpd.apache.org/mod_fcgid/mod/mod_fcgid.html#fcgidinitialenv
[3] http://www.fastcgi.com/mod_fastcgi/docs/mod_fastcgi.html  (-initial-env 
options)

Regards,

Larry Shaffer
Dakota Cartography
Black Hills, South Dakota

QGIS Support/Development | Boundless

On Tue, Oct 27, 2015 at 4:43 AM, Henrik Uggla 
> wrote:
It seems to be caused by some file somewhere having wrong permissions. This 
error is from my Apache log:
ERROR: Auth db directory path could not be created

Googling the phrase I found this:
http://qgis.org/api/qgsauthmanager_8cpp_source.html

Where is this db directory path supposed to be created?

Henrik

Re: [Qgis-user] Problems with Qgis Server 2.12

[Burghardt.Scholle]

Hi Henrik,

could you please explain how and where you have set the variable 
QGIS_AUTH_DB_DIR_PATH? I have set the variable in both the "/etc/environment" 
(for QGIS Desktop) as well as in my vhost file 'FcgidInitialEnv 
QGIS_AUTH_DB_DIR_PATH "/usr/local/share/qgis" '. QGIS Desktop creates the 
'qgis-auth.db' at the first start. But I still get the Apache message "ERROR: 
Auth db directory path could not be created". The directory and the db-file are 
*writeable* by Server's FCGI process user. What am I doing wrong?

Best regards
Burghardt



Von: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag von Henrik 
Uggla
Gesendet: Mittwoch, 28. Oktober 2015 14:38
An: Larry Shaffer
Cc: qgis-user
Betreff: Re: [Qgis-user] Problems with Qgis Server 2.12


I tried to set QGIS_AUTH_DB_DIR_PATH and the error message in the Apache log 
disappeared. I still got the "WMS configuration error" message though. It 
turned out to be the map parameter. In 2.8 you did not have to give the map 
parameter when there were only one .qgs-file was present. In 2.12 it is 
obviously mandatory. Thanks for your input!



/Henrik




Från: la...@shafferinteractive.com 
> för Larry 
Shaffer >
Skickat: den 27 oktober 2015 19:22
Till: Henrik Uggla
Kopia: Andreas Neumann; qgis-user
Ämne: Re: [Qgis-user] Problems with Qgis Server 2.12

Hi Henrik,

This is due to the new authentication system in 2.12 [0], and the support I 
added to Server. When running Server, projects loaded that contain an 
authentication configuration (instead of clear text username/password) for 
accessing a secured resource, e.g. WMS using Basic Auth and HTTPS, need to be 
able to access the new 'qgis-auth.db'.

The auth configurations are encrypted using a master password and stored in the 
qgis-auth.db, which by default is located at ~/.qgis2/qgis-auth.db for a 
desktop QGIS user. To enable Server support, I added two environment variables 
to overcome the problems associated with automatically loading projects [1], 
which are not yet fully documented:

* QGIS_AUTH_DB_DIR_PATH - Directory where an existing qgis-auth.db is located 
or created if not present. This directory needs to be *writeable* by Server's 
FCGI process user (which may differ from Apache's).

* QGIS_AUTH_PASSWORD_FILE - File path to file with master password as first 
line. This is similar to password files used by database servers. The env 
variable is read during QGIS startup, then removed from the env variables 
space, so it is not available later on to the FCGI process or any Server 
plugins. Since all auth configurations are encrypted, a master password is 
required to access the qgis-auth.db, if a loaded project uses auth configs 
stored in the qgis-auth.db.

What you have found is possibly a bug: the QGIS_AUTH_DB_DIR_PATH is now 
required to start Server, even if no loaded project make use of the new auth 
system. This is not really a bug if one considers the auth system setup 
mandatory from 2.12+, like it is on Desktop. At the minimum, a 
missing/non-writeable qgis-auth.db directory should throw a warning and not an 
error, allowing Server to launch.

Please try setting QGIS_AUTH_DB_DIR_PATH to a directory writeable by the 
Server's FCGI process user and see if Server starts normally. Then check that 
qgis-auth.db is created in the directory.

Here is how to set the env variables for the FCGI process in Apache [2,3]. 
Note, setting them at the Apache process level will not work.


[0] 
https://github.com/dakcarto/QGIS-Enhancement-Proposals/blob/auth-system/qep-14-authentication-system.rst
[1] https://github.com/qgis/QGIS/blob/master/src/server/qgsserver.cpp#L359-L362
[2] https://httpd.apache.org/mod_fcgid/mod/mod_fcgid.html#fcgidinitialenv
[3] http://www.fastcgi.com/mod_fastcgi/docs/mod_fastcgi.html  (-initial-env 
options)

Regards,

Larry Shaffer
Dakota Cartography
Black Hills, South Dakota

QGIS Support/Development | Boundless

On Tue, Oct 27, 2015 at 4:43 AM, Henrik Uggla 
> wrote:
It seems to be caused by some file somewhere having wrong permissions. This 
error is from my Apache log:
ERROR: Auth db directory path could not be created

Googling the phrase I found this:
http://qgis.org/api/qgsauthmanager_8cpp_source.html

Where is this db directory path supposed to be created?

Henrik


Från: Qgis-user 
> 
för Andreas Neumann >
Skickat: den 27 oktober 2015 05:37
Till: qgis-user@lists.osgeo.org
Ämne: Re: [Qgis-user] Problems with Qgis Server 2.12

Hi Henrik,

Any errors in the Apache log files? Or QGIS 

[Qgis-user] Load ESRI Personal Geodatabase in QGIS 2.8.1

[Burghardt.Scholle]

Hi Ulrike,

yes, it is possible to open a pGDB in QGIS. However, the versions of QGIS and 
MS Access must be the same: 32bit QGIS = 32bit Access vs. QGIS 64bit = 64bit MS 
Access.

Greetings
Burghardt

Von: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag von Ulrike 
Assmann
Gesendet: Dienstag, 17. November 2015 09:56
An: qgis-user@lists.osgeo.org
Cc: b...@hstumwelt.de
Betreff: [Qgis-user] Load ESRI Personal Geodatabase in QGIS 2.8.1

Dear list,

I have a problem with opening a ESRI Personal Geodatabase with Annotation 
Layers in QGIS 2.8.1. I have tried to open it as vector layer:

*  as "Datei/file" using "MDB" and also
*  as "Datenbank/database" using type "ESRI-Personal-GeoDatabase", 
Might I have chosen an incorrect database connection? How do I fill the entry 
mask properly to make it work?

I got the following error messages:
*  first message: "ungültige Datenquelle/invalid data source"
*  second message: "Verbindung fehlgeschlagen/connection failed".

Is there even the possibility to open a ESRI Personal Geodatabase in QGIS?

Many thanks
Ulrike
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

[Qgis-user] Mobile Client - symbol color changes

[Burghardt.Scholle]

Dear list,

when I use the mobile client with colored svg-symbols and arial images at the 
same time, the color of the symbols changes when moving or zooming the map. In 
my config.js under Config.map.wmsParams - 'FORMAT' stands the value 'image/png; 
mode=8bit'. For lines or polygons this effect doesn't occur. Can someone give 
me a hint how to solve this problem?

Kind regards
Burghardt

***

Stadt Wolfsburg
Geschäftsbereich IT - 15-3 GIS
Rathaus E, Zi. E403, Porschestraße 47A, D-38440 Wolfsburg
Tel +49 5361 28-2531
Fax +49 5361 28-1765
mailto:burghardt.scho...@stadt.wolfsburg.de


___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Drawing order in mobile client

[Burghardt.Scholle]

Hi Andreas,

yes, you're right and yes, I'm interested in the ruby script. Thank you for 
your offer.

Burghardt

***

Stadt Wolfsburg
Geschäftsbereich IT - 15-3 GIS
Rathaus E, Zi. E403, Porschestraße 47A, D-38440 Wolfsburg
Tel +49 5361 28-2531
Fax +49 5361 28-1765
mailto:burghardt.scho...@stadt.wolfsburg.de



___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Ubuntu-unstable: New gdal and no QGIS 2.8.2, Signaturprüfung: FEHLER

[Burghardt.Scholle]

Hi Jürgen,

Oh, you're right. My mistake - sorry.

Burghardt

Von: qgis-user-boun...@lists.osgeo.org qgis-user-boun...@lists.osgeo.org im 
Auftrag von Jürgen E. Fischer j...@norbit.de
Gesendet: Mittwoch, 13. Mai 2015 18:22
An: qgis-user@lists.osgeo.org
Betreff: Re: [Qgis-user] Ubuntu-unstable: New gdal and no QGIS 2.8.2, 
Signaturprüfung: FEHLER

Hi Burghardt,

On Wed, 13. May 2015 at 12:54:35 +, burghardt.scho...@stadt.wolfsburg.de 
wrote:
 [1] http://www.qgis.org/de/site/forusers/alldownloads.html#ubuntu  - Debian 
 / Ubuntu

Is there still a link that points there somewhere?

It should point to
http://www.qgis.org/de/site/forusers/alldownloads.html#debian-ubuntu


Jürgen

--
Jürgen E. Fischer   norBIT GmbH Tel. +49-4931-918175-31
Dipl.-Inf. (FH) Rheinstraße 13  Fax. +49-4931-918175-50
Software Engineer   D-26506 Norden http://www.norbit.de
QGIS release manager (PSC)  GermanyIRC: jef on FreeNode
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

[Qgis-user] Drawing order in mobile client

[Burghardt.Scholle]

Dear list,

since updating to QGIS 2.8.2 I have problems with the drawing order in mobile 
client. With old and even with completely newly created projects I have to turn 
the drawing order, so that the map is drawn properly in mobile client. QGIS 
desktop and the web client will not be affected. The map is drawn in the 
correct order as in the previous versions. Can anyone give me a hint what could 
be wrong?

Kind regards
Burghardt

***

Stadt Wolfsburg
Geschäftsbereich IT - 15-3 GIS
Rathaus E, Zi. E403, Porschestraße 47A, D-38440 Wolfsburg
Tel +49 5361 28-2531
Fax +49 5361 28-1765
mailto:burghardt.scho...@stadt.wolfsburg.de


___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Drawing order in mobile client

[Burghardt.Scholle]

Hi Jürgen,

yes - perhaps, your guess may be true, but under qgis server 2.8.1 I had no 
problems. Only since the version 2.8.2 I have these problems with the QMC - 
mainly with grouped layers. The QWC makes no problems.

Burghardt

***

Stadt Wolfsburg
Geschäftsbereich IT - 15-3 GIS
Rathaus E, Zi. E403, Porschestraße 47A, D-38440 Wolfsburg
Tel +49 5361 28-2531
Fax +49 5361 28-1765
mailto:burghardt.scho...@stadt.wolfsburg.de



___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Drawing order in mobile client

[Burghardt.Scholle]

Hi Andreas,

yes, of course I looked immediately at the json files. The grouped layer in my 
QGIS project I respond in QMC as one layer. Up to version 2.8.1 those grouped 
layers were presented in QMC in the correct drawing order. Now I have to 
completely turn around the QGIS project. This looks not very nice in QGIS 
desktop :-). Of course I could also disperse the grouped layers in the json 
file. However, this makes a lot of work and creates unnecessary maintenance - 
imho. BTW - I create the json files manually.

No, the network request I havn't checked not yet. I'll fetch it later.

Greetings
Burghardt

***

Stadt Wolfsburg
Geschäftsbereich IT - 15-3 GIS
Rathaus E, Zi. E403, Porschestraße 47A, D-38440 Wolfsburg
Tel +49 5361 28-2531
Fax +49 5361 28-1765
mailto:burghardt.scho...@stadt.wolfsburg.de


___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] qgis-server vs layer id

[Burghardt.Scholle]

Hi Nathan,

oh, good to know. I'll try the workaround for now. I thought the layer id would 
have a greater importance :-).

Many thanks
Burghardt

***

mailto:burghardt.scho...@stadt.wolfsburg.de



___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

[Qgis-user] qgis-server vs layer id

[Burghardt.Scholle]

Dear list,

I enjoy working with templates for QGIS projects. This brings when working with 
QGIS Desktop many advantages, but leads to problems with the QGIS Web Client. 
When I save a project file under a different name, the id of the layer, 
unfortunately, is maintained. If I use both project files in the qgis-server, 
this creates problems with caching of layer. That is particularly evident when 
identical layer named differently or otherwise be symbolized. 
This topic is discussed on several occasions in the past [1,2] and has been 
referred to as bug or limitation. In [2] it's said that the combination of 
project name and layer ID could be a solution for the problem. Up to and 
including version 2.8.1, the change has not yet been carried out. Is there an 
effort to change the creation of the layer ID in a future release?

Kind regards
Burghardt

[1] 
http://osgeo-org.1560.x6.nabble.com/Qgis-server-returns-map-from-another-project-that-is-defined-in-URL-td5153101.html#a5153150
[2] http://hub.qgis.org/issues/7956

***
mailto:burghardt.scho...@stadt.wolfsburg.de


___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user