Re: [QGIS-it-user] QGIS le variabili e la privacy

[Andrea Giudiceandrea]

Totò wrote
> Fin qui, nulla di strano, ma quando creo un progetto viene popolata la
> variabile @project_author con il valore presente in user_full_name, se
> condividessi il mio progetto la variabile @project_author rimarrebbe
> sempre
> con il mio nome.

Ciao Salvatore,
la memorizzazione automatica del nome dell'utente è personalizzabile dalle
due impostazioni "projects\anonymize_new_projects" e
"projects\anonymize_saved_projects" nella sezione "core".

Da quello che ho potuto capire, sembra che la funzionalità sia stata
introdotta a partire dalla versione 3.2.0 circa 3 anni fa.

Si possono trovare maggiori informazioni su come e perché sia stata
implementata consultando le seguenti risorse:
https://github.com/qgis/QGIS-Enhancement-Proposals/issues/115
https://github.com/qgis/QGIS/pull/6635
https://github.com/qgis/QGIS/pull/33843
https://github.com/qgis/QGIS/pull/33870

Nei commenti sono anche presenti alcune obiezioni e preoccupazioni sulla
funzionalità per quanto riguarda la privacy dell'utente e alcune risposte
sulle scelte di implementazione.

Spero siano utili.

A presto.

Andrea



--
Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-Italian-User-f5250612.html
___
QGIS-it-user mailing list
QGIS-it-user@lists.osgeo.org
https://lists.osgeo.org/mailman/listinfo/qgis-it-user

Re: [QGIS-it-user] QGIS le variabili e la privacy

[Gispy Net]

Effettivamente la cosa non mi è nuova,
lo avevo notato qualche tempo fa a dire il vero,  recuperando le info da
mostrare  con delle etichette rappresentative all’ interno della Canvas,
ora raggiungibili più facilmente con un menù dedicati dagli ultimi
aggiornamenti.

Concordo sul fatto, che un applicativo non dovrebbe mai pescare
informazioni, senza il consenso dell’utente finale, soprattutto quando si
tratta di progetti che vengono trasmessi ad altre realtà lavorative, che
oltre alla privacy, potrebbero  ingenerare problemi riguardanti la
proprietà intellettuale dei progetti stessi.

saluti

Ivano


Il giorno ven 12 mar 2021 alle 23:38 Andrea Giudiceandrea <
andreaer...@libero.it> ha scritto:

> Totò wrote
> > Fin qui, nulla di strano, ma quando creo un progetto viene popolata la
> > variabile @project_author con il valore presente in user_full_name, se
> > condividessi il mio progetto la variabile @project_author rimarrebbe
> > sempre
> > con il mio nome.
>
> Ciao Salvatore,
> la memorizzazione automatica del nome dell'utente è personalizzabile dalle
> due impostazioni "projects\anonymize_new_projects" e
> "projects\anonymize_saved_projects" nella sezione "core".
>
> Da quello che ho potuto capire, sembra che la funzionalità sia stata
> introdotta a partire dalla versione 3.2.0 circa 3 anni fa.
>
> Si possono trovare maggiori informazioni su come e perché sia stata
> implementata consultando le seguenti risorse:
> https://github.com/qgis/QGIS-Enhancement-Proposals/issues/115
> https://github.com/qgis/QGIS/pull/6635
> https://github.com/qgis/QGIS/pull/33843
> https://github.com/qgis/QGIS/pull/33870
>
> Nei commenti sono anche presenti alcune obiezioni e preoccupazioni sulla
> funzionalità per quanto riguarda la privacy dell'utente e alcune risposte
> sulle scelte di implementazione.
>
> Spero siano utili.
>
> A presto.
>
> Andrea
>
>
>
> --
> Sent from:
> http://osgeo-org.1560.x6.nabble.com/QGIS-Italian-User-f5250612.html
> ___
> QGIS-it-user mailing list
> QGIS-it-user@lists.osgeo.org
> https://lists.osgeo.org/mailman/listinfo/qgis-it-user
>
___
QGIS-it-user mailing list
QGIS-it-user@lists.osgeo.org
https://lists.osgeo.org/mailman/listinfo/qgis-it-user

Re: [QGIS-it-user] Mappa valori "dinamica"

[virtusmankind]

Infatti, istintivamente ho messo la chiave gid come campo chiave. Ma la
restituzione era errata, in questo modo invece funziona... farò altri test
per verificare!



--
Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-Italian-User-f5250612.html
___
QGIS-it-user mailing list
QGIS-it-user@lists.osgeo.org
https://lists.osgeo.org/mailman/listinfo/qgis-it-user

Re: [Qgis-user] qgis server osgeo4w64 noobs question qgis server

[Marc Millas]

Jorge,

I follow the steps on the install qgisserver on windows of the qgis web
site.
only difference is that I get an apache distro, not the xampp one stated in
the doc.


Marc MILLAS
Senior Architect
+33607850334
www.mokadb.com



On Fri, Mar 12, 2021 at 10:58 PM Marc Millas  wrote:

> Hi Jorge,
>
> I did try to describe what I did as much precisely as I can.
> w10 machine with a qgis desktop 3.16.4 which run fine.
> a postgres12/postgis3.1 DB
> No pb to display a map (like osm standard) and to add layers out of the
> postgres DB within the qgis desktop.
>
> What I try to POC is qgis server. So, I install osgeo4W64 with all
> options, and try to follow the doc:
> setup the http.conf of an apache2.4
> and then run requests from a chrome or mozilla browser.
> you ask "is qgis server running ?"
> I reread the doc and found nowhere this.
> Also, in the osgeo4W64/bin  directory nothing like a qgisserver.exe (or
> similar)file
> neither in the osgeo4W64/app/qgis/bin directory
>
> So, please, can you explain what you mean ?
>
> thanks
>
>
> Marc MILLAS
> Senior Architect
> +33607850334
> www.mokadb.com
>
>
>
> On Fri, Mar 12, 2021 at 9:25 PM Jorge Gustavo Rocha 
> wrote:
>
>> Hi Marc,
>>
>> Can you ask a more specific question? I'm sorry, but for someone like me
>> that knows nothing about you attempts, it is difficult to help.
>>
>> Is QGIS Server running or not? If not, what is the problem?
>>
>> QGIS Server reads *.qgz project files. That's for sure and you will not
>> find nothing that says it can't. QGIS Server reads the same project formats
>> as QGIS Desktop.
>>
>> How are you testing it? Are you writing manually the calls to the
>> services or are you using some client (like QGIS Desktop)? You can debug
>> QGIS Server using QGIS Desktop as client.
>>
>> Regards,
>>
>> Jorge Gustavo
>> Às 12:39 de 12/03/21, Marc Millas escreveu:
>>
>> Nobody on this??
>>
>> I need help
>> Thanks
>>
>> Le jeu. 11 mars 2021 à 17:27, Marc Millas  a
>> écrit :
>>
>>> Hi, I just reinstall a full osgeo4W64 distro on a w10 machine. (with
>>> qgis 3.16.4)
>>> I have created 2 simple projects with qgis desktop
>>> 1) with only an osm standard map
>>> 2) with the same map+ 2 layers out of postgres12//postgis3.1  one layer
>>> polygon ; one layer  point
>>>
>>> I do setup the project qgisserver properties, so as to limit the size of
>>> the map , ...
>>>
>>> I have a fresh, working, apache24 installed on the same w10 machine
>>> (apache lounge distro)
>>>
>>> So, I try to follow some docs to test the qgisserver capabilities.
>>>
>>> I modified the http.conf file, and run the WMS getcapabilities test
>>> suggested in the doc. fine, I get an xml doc stating various things. ok.
>>>
>>> Then I try the getmap test using my just created qgis projects.
>>> 1) looks like that 3xx version of qgis server dont know the qgz format.
>>> So back to qgis to save each project in a qgs format. (I found nothing  in
>>> the doc about this)
>>> 2) now when I run the getmap test out of the same browser, I get a white
>>> rectangle of the size asked for in the getmap request, in a wholly black
>>> landscape.
>>>
>>> -looking at apache log, I found for each test a set of errors coming
>>> from qgis-mapserv.fcgi.exe saying that the .exe didnt found proj.db
>>> after a little internet digging, I did setup PROJ_LIB pointing to
>>> the C:\OSGeo4W64\share\proj
>>> directory where the osgeo installer put the proj.db file
>>>
>>> Rerun the getmap test.
>>> nothing changes.
>>>
>>> also if I run the getmap request with the qgis-server instead of the
>>> qgis_mapserv.fcgi.exe tool, I get a simple "url not found" apache message.
>>>
>>>
>>> looks like I need some help
>>> thanks,
>>> regards,
>>>
>>>
>>>
>>> Marc MILLAS
>>> Senior Architect
>>> +33607850334
>>> www.mokadb.com
>>>
>>>
>> ___
>> Qgis-user mailing listqgis-u...@lists.osgeo.org
>> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
>> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
>>
>> --
>> [image: Logo] 
>> *Geomaster*
>> *Jorge Gustavo Rocha* | Software Engineer
>> *e:* j...@geomaster.pt | *m:* +351 910 333 888
>> *g:* 41.54094,-8.40490 | *v: * 510 906 109
>> *a: * Rua António Cândido Pinto, 67, 4715-400 Braga
>> ___
>> Qgis-user mailing list
>> Qgis-user@lists.osgeo.org
>> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
>> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
>>
>
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] qgis server osgeo4w64 noobs question qgis server

[Marc Millas]

Hi Jorge,

I did try to describe what I did as much precisely as I can.
w10 machine with a qgis desktop 3.16.4 which run fine.
a postgres12/postgis3.1 DB
No pb to display a map (like osm standard) and to add layers out of the
postgres DB within the qgis desktop.

What I try to POC is qgis server. So, I install osgeo4W64 with all options,
and try to follow the doc:
setup the http.conf of an apache2.4
and then run requests from a chrome or mozilla browser.
you ask "is qgis server running ?"
I reread the doc and found nowhere this.
Also, in the osgeo4W64/bin  directory nothing like a qgisserver.exe (or
similar)file
neither in the osgeo4W64/app/qgis/bin directory

So, please, can you explain what you mean ?

thanks


Marc MILLAS
Senior Architect
+33607850334
www.mokadb.com



On Fri, Mar 12, 2021 at 9:25 PM Jorge Gustavo Rocha 
wrote:

> Hi Marc,
>
> Can you ask a more specific question? I'm sorry, but for someone like me
> that knows nothing about you attempts, it is difficult to help.
>
> Is QGIS Server running or not? If not, what is the problem?
>
> QGIS Server reads *.qgz project files. That's for sure and you will not
> find nothing that says it can't. QGIS Server reads the same project formats
> as QGIS Desktop.
>
> How are you testing it? Are you writing manually the calls to the services
> or are you using some client (like QGIS Desktop)? You can debug QGIS Server
> using QGIS Desktop as client.
>
> Regards,
>
> Jorge Gustavo
> Às 12:39 de 12/03/21, Marc Millas escreveu:
>
> Nobody on this??
>
> I need help
> Thanks
>
> Le jeu. 11 mars 2021 à 17:27, Marc Millas  a
> écrit :
>
>> Hi, I just reinstall a full osgeo4W64 distro on a w10 machine. (with qgis
>> 3.16.4)
>> I have created 2 simple projects with qgis desktop
>> 1) with only an osm standard map
>> 2) with the same map+ 2 layers out of postgres12//postgis3.1  one layer
>> polygon ; one layer  point
>>
>> I do setup the project qgisserver properties, so as to limit the size of
>> the map , ...
>>
>> I have a fresh, working, apache24 installed on the same w10 machine
>> (apache lounge distro)
>>
>> So, I try to follow some docs to test the qgisserver capabilities.
>>
>> I modified the http.conf file, and run the WMS getcapabilities test
>> suggested in the doc. fine, I get an xml doc stating various things. ok.
>>
>> Then I try the getmap test using my just created qgis projects.
>> 1) looks like that 3xx version of qgis server dont know the qgz format.
>> So back to qgis to save each project in a qgs format. (I found nothing  in
>> the doc about this)
>> 2) now when I run the getmap test out of the same browser, I get a white
>> rectangle of the size asked for in the getmap request, in a wholly black
>> landscape.
>>
>> -looking at apache log, I found for each test a set of errors coming from
>> qgis-mapserv.fcgi.exe saying that the .exe didnt found proj.db
>> after a little internet digging, I did setup PROJ_LIB pointing to
>> the C:\OSGeo4W64\share\proj
>> directory where the osgeo installer put the proj.db file
>>
>> Rerun the getmap test.
>> nothing changes.
>>
>> also if I run the getmap request with the qgis-server instead of the
>> qgis_mapserv.fcgi.exe tool, I get a simple "url not found" apache message.
>>
>>
>> looks like I need some help
>> thanks,
>> regards,
>>
>>
>>
>> Marc MILLAS
>> Senior Architect
>> +33607850334
>> www.mokadb.com
>>
>>
> ___
> Qgis-user mailing listqgis-u...@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
>
> --
> [image: Logo] 
> *Geomaster*
> *Jorge Gustavo Rocha* | Software Engineer
> *e:* j...@geomaster.pt | *m:* +351 910 333 888
> *g:* 41.54094,-8.40490 | *v: * 510 906 109
> *a: * Rua António Cândido Pinto, 67, 4715-400 Braga
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
>
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] qgis server osgeo4w64 noobs question qgis server

[Jorge Gustavo Rocha]

Hi Marc,

Can you ask a more specific question? I'm sorry, but for someone like me
that knows nothing about you attempts, it is difficult to help.

Is QGIS Server running or not? If not, what is the problem?

QGIS Server reads *.qgz project files. That's for sure and you will not
find nothing that says it can't. QGIS Server reads the same project
formats as QGIS Desktop.

How are you testing it? Are you writing manually the calls to the
services or are you using some client (like QGIS Desktop)? You can debug
QGIS Server using QGIS Desktop as client.

Regards,

Jorge Gustavo

Às 12:39 de 12/03/21, Marc Millas escreveu:
> Nobody on this??
>
> I need help
> Thanks
>
> Le jeu. 11 mars 2021 à 17:27, Marc Millas  > a écrit :
>
> Hi, I just reinstall a full osgeo4W64 distro on a w10 machine.
> (with qgis 3.16.4)
> I have created 2 simple projects with qgis desktop
> 1) with only an osm standard map 
> 2) with the same map+ 2 layers out of postgres12//postgis3.1  one
> layer polygon ; one layer  point
>
> I do setup the project qgisserver properties, so as to limit the
> size of the map , ...
>
> I have a fresh, working, apache24 installed on the same w10
> machine (apache lounge distro)
>
> So, I try to follow some docs to test the qgisserver capabilities.
>
> I modified the http.conf file, and run the WMS getcapabilities
> test suggested in the doc. fine, I get an xml doc stating various
> things. ok.
>
> Then I try the getmap test using my just created qgis projects.
> 1) looks like that 3xx version of qgis server dont know the qgz
> format. So back to qgis to save each project in a qgs format. (I
> found nothing  in the doc about this) 
> 2) now when I run the getmap test out of the same browser, I get a
> white rectangle of the size asked for in the getmap request, in a
> wholly black landscape.
>
> -looking at apache log, I found for each test a set of errors
> coming from qgis-mapserv.fcgi.exe saying that the .exe didnt found
> proj.db
> after a little internet digging, I did setup PROJ_LIB pointing to
> the C:\OSGeo4W64\share\proj
> directory where the osgeo installer put the proj.db file
>
> Rerun the getmap test.
> nothing changes.
>
> also if I run the getmap request with the qgis-server instead of
> the qgis_mapserv.fcgi.exe tool, I get a simple "url not found"
> apache message.
>
>
> looks like I need some help
> thanks,
> regards,
>
>
>
> Marc MILLAS
> Senior Architect
> +33607850334
> www.mokadb.com 
>
>
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
-- 
Email Signature
Logo  
*Geomaster*
*Jorge Gustavo Rocha* | Software Engineer
*e:*j...@geomaster.pt | *m:*+351 910 333 888
*g:*41.54094,-8.40490 | *v: *510 906 109
*a: * Rua António Cândido Pinto, 67, 4715-400 Braga

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [QGIS-it-user] Mappa valori "dinamica"

[virtusmankind]

virtusmankind wrote
> Ho uno strano comportamento utilizzando la relazione valore (QGis 3.10.13)
> Layer strade: Creo una via (ad es. via Roma), salvo.
> Layer civici: Creo un civico (1), nel campo "Strada" mi trova "Via Roma"
> come desideravo. Aggiungo il civico. 
> 
> Ho creato un campo che si autopopola concatenando "Strada" || ',' ||
> "Civico". L'espressione funziona solo che non mi scrive Via Roma, 1 come
> mi
> aspettavo, ma *13,1*.
> Cosa succede? Il 
*
> 13
*
>  è il gid (la chiave primaria) del record scritto nel layer strade.

Mi rispondo da solo! Nel widget "Relazione valore" viene chiesto il Layer
(Strade), la colonna chiave e la colonna valore. Avevo impostato la colonna
chiave come "gid" e la colonna valore come "Strada", mentre dovevo scegliere
"Strada" sia per colonna chiave che per colonna valore.



--
Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-Italian-User-f5250612.html
___
QGIS-it-user mailing list
QGIS-it-user@lists.osgeo.org
https://lists.osgeo.org/mailman/listinfo/qgis-it-user

Re: [Qgis-user] Learning resources/books for QGIS

[Alexandre Neto]

Hi,

Discover QGIS 3, by kurt menke and QGIS Map Design, by anita graser and
grechen peterson, both from locate press are safe bets:

https://locatepress.com/books

Also check Ujaval Gandhi zero to hero tutorials:

https://www.qgistutorials.com/en/

Good luck,

Alexandre Neto

A sexta, 12/03/2021, 17:40, Roderick Anderson 
escreveu:

> Good day.
>
> I looking for some suggestions of books on learning QGIS.
>
> I have some background (very long ago - late 80's / early 90's) with GIS
> but at that time is was more about mapping not analysis.
>
> In fact, I am looking to use QGIS for building maps for personal use.
> Something along the lines of the Washington state (US) "Map Your
> Neighborhood" project.  The ability to easily load personal data is
> important.
>
> For me the QGIS Documentation assumes a more current knowledge of the
> technology and terminology than I have.
>
> I've looked at the QGIS book selections but not quite sure which would
> the best for my needs.
>
> Any and all suggestions are welcome.
>
>
> TIA,
> Rod
> --
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
>
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [QGIS-it-user] Mappa valori "dinamica"

[Totò]

virtusmankind wrote
> Mi rispondo da solo! Nel widget "Relazione valore" viene chiesto il Layer
> (Strade), la colonna chiave e la colonna valore. Avevo impostato la
> colonna
> chiave come "gid" e la colonna valore come "Strada", mentre dovevo
> scegliere
> "Strada" sia per colonna chiave che per colonna valore.

No, è concettualmente errato.
Se ti funziona significa che anche il campo strada è univoco.

saluti



-
https://pigrecoinfinito.com/
--
Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-Italian-User-f5250612.html
___
QGIS-it-user mailing list
QGIS-it-user@lists.osgeo.org
https://lists.osgeo.org/mailman/listinfo/qgis-it-user

Re: [Qgis-user] Create circle with diameter in QGIS

[Raul Ayala Domingo]

With Geometry Shapes complement you can draw a circle / oval just with a center 
point and setting radius (x) and radius (y)

> El 12 mar 2021, a las 14:21, qgis-user-requ...@lists.osgeo.org escribió:
> 
> Message: 1
> Date: Fri, 12 Mar 2021 12:37:40 + (UTC)
> From: Madeline Krohn mailto:m2.kr...@yahoo.de>>
> To: "qgis-user@lists.osgeo.org " 
> mailto:qgis-user@lists.osgeo.org>>
> Subject: [Qgis-user] Create circle with diameter in QGIS
> Message-ID: <783378190.318358.1615552660...@mail.yahoo.com 
> >
> Content-Type: text/plain; charset="utf-8"
> 
> Dear QGIS Team,
> I would like to create a circle whose diameter is 75 metres. I am using QGIS 
> version 3.16.3-Hannover.
> My procedure so far has been like this:1. create a new shapefile layer -> 
> geometry type: polygon2. in edit mode of this layer: add circle with centre 
> and another point--> How can I change the radius/diameter of the circle 
> afterwards or is there another possibility to create a circle with diameter 
> directly?
> Thank you very much and best regardsMadeline



smime.p7s
Description: S/MIME cryptographic signature
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Learning resources/books for QGIS

[Kirk Schmidt]

Hi Rod:

I would suggest a video to get a feel for how things work. Things are a 
lot easier without command level inputs.  Try:


https://www.youtube.com/watch?v=kCnNWyl9qSE

There are lots of resources on youtube.

Kirk Schmidt

On 3/12/2021 1:39 PM, Roderick Anderson wrote:

Good day.

I looking for some suggestions of books on learning QGIS.

I have some background (very long ago - late 80's / early 90's) with 
GIS but at that time is was more about mapping not analysis.


In fact, I am looking to use QGIS for building maps for personal use. 
Something along the lines of the Washington state (US) "Map Your 
Neighborhood" project.  The ability to easily load personal data is 
important.


For me the QGIS Documentation assumes a more current knowledge of the 
technology and terminology than I have.


I've looked at the QGIS book selections but not quite sure which would 
the best for my needs.


Any and all suggestions are welcome.


TIA,
Rod


--
Kirk Schmidt, MScF, BScF, RPF
General Manager
Nortek Resource Solutions Inc.
RR # 1
Thorburn, NS
B0K 1W0
Tel (902) 922.3607
Email: k...@nortekresources.com
Web: www.nortekresources.com

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

[Qgis-user] Learning resources/books for QGIS

[Roderick Anderson]

Good day.

I looking for some suggestions of books on learning QGIS.

I have some background (very long ago - late 80's / early 90's) with GIS 
but at that time is was more about mapping not analysis.


In fact, I am looking to use QGIS for building maps for personal use. 
Something along the lines of the Washington state (US) "Map Your 
Neighborhood" project.  The ability to easily load personal data is 
important.


For me the QGIS Documentation assumes a more current knowledge of the 
technology and terminology than I have.


I've looked at the QGIS book selections but not quite sure which would 
the best for my needs.


Any and all suggestions are welcome.


TIA,
Rod
--
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [QGIS-it-user] Mappa valori "dinamica"

[virtusmankind]

Ho uno strano comportamento utilizzando la relazione valore (QGis 3.10.13)
Layer strade: Creo una via (ad es. via Roma), salvo.
Layer civici: Creo un civico (1), nel campo "Strada" mi trova "Via Roma"
come desideravo. Aggiungo il civico. 

Ho creato un campo che si autopopola concatenando "Strada" || ',' ||
"Civico". L'espressione funziona solo che non mi scrive Via Roma, 1 come mi
aspettavo, ma *13,1*.
Cosa succede? Cos'è quel 13

Naturalmente dopo tento la strada di Totò (anche se il mio unico dubbio è se
funziona su QGis Server 2.18!!)

Grazie ancora



--
Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-Italian-User-f5250612.html
___
QGIS-it-user mailing list
QGIS-it-user@lists.osgeo.org
https://lists.osgeo.org/mailman/listinfo/qgis-it-user

Re: [Qgis-user] Raster Layer Symbology Problem

[Sebastian Gutwein]

Martin,
The link that Alessandro provided was indeed the ability to revert back to
the previous discrete method. https://github.com/qgis/QGIS/pull/42193
As the pull request has a Backport 3.18 flag on it I assume that that means
that for the 3.18.1 release next week there should be the ability to turn
off continuous raster legend!
-Bas

On Fri, Mar 12, 2021 at 6:30 AM Martin Bittens 
wrote:

> Hello Sebastian,
>
> thank you for your response. Yes indeed, for me the coloring style you
> showed would be an option. This style is what I get in GRASS GIS as well.
> But,
>
> what I would prefer in QGIS is this (as provided by QGIS 3.16.4 LTR):
>
>
> So I hope that in future QGIS versions, the user will have the choice
> between the different display options. As far as I understood the
> discussions in the links you sent there is something going on in order to
> add an option for selecting the new  or the old display style.
> Unfortunately, I am not an expert in that programming stuff and therefore I
> don't know how to apply what there is explained. I will wait and see what
> the next QGIS versions offer for displaying raster gradient legends. And I
> will keep the QGIS 3.16.4 LTR with special care not loosing the display
> style I showed above.
>
>
> Regards
>
>
> Martin
>
>
> Am 3/10/2021 um 5:54 PM schrieb Sebastian Gutwein:
>
> Martin,
> I agree with your assessment.
> I assume the assumption of the designers (thank you Nyall Dawson et al for
> all of your amazing work) was that if you were displaying a
> continuous raster you would want a continuous legend as well.
> As shown by your issue and in the links I shared with you the reality is
> that this doesn't fit all use cases.
> I am considering writing up a feature request to address those issues.
> Unless you want to?
> To help me understand your use case more would a legend that was
> continuous but had numerical values at each "break" work for you? An
> example of this is in this tutorial
> https://www.ecodiv.earth/post/legend-for-continuous-raster-in-qgis-composer/
> [image: image.png]
>
> -Bas
>
> On Wed, Mar 10, 2021 at 2:34 PM Martin Bittens 
> wrote:
>
>> Sebastian, Bernd,
>>
>> thanks a lot for your response. I checked the links Sebastian sent. As
>> far as I could see displaying data in the legend as a continuum is a new
>> feature in QGIS 3.18 which replaced the previous method displaying data in
>> the legend as categories (as QGIS 3.16.4 is still doing - fortunately.
>> Otherwise it would be difficult producing maps in ongoing projects in a
>> consistent layout). And obviously there is no option available switching
>> between the old and the new display method. Personally I think it was not a
>> good decision giving up completely the categorical display in the legend.
>> In particular if you would work with multiple colors and a large range of
>> values, there is no way to allocate map colors to the corresponding values,
>> or vice versa.
>>
>> So, I hope that the next QGIS version will include an option which allows
>> selecting the method how to  display the data, as continuum or categorized.
>>
>>
>> Regards
>>
>> Martin
>>
>>
>> Am 3/9/2021 um 4:18 PM schrieb Sebastian Gutwein:
>>
>> Martin,
>> I think this may be the result of the new feature
>> https://qgis.org/en/site/forusers/visualchangelog318/#feature-gradient-ramp-based-legends
>> Which is exciting for me becasue that is how I would like to have my
>> continious data display. But it sounds like that is not what you are
>> interested in. I have not tried 3.18 myself so don't know if there is a
>> workaround.
>> It does look like there are some links to discussions in the comments of
>> this stack exchange question.
>> gis.stackexchange.com/questions/388843/qgis-3-18-override-raster-gradient-legends
>>
>> gis.stackexchange.com/questions/388154/how-to-get-back-discrete-raster-legend-symbols-in-qgis-3-16
>> twitter.com/ThomasG77/status/1365255399927140355
>>
>>
>> On Tue, Mar 9, 2021 at 7:54 AM Bernd Vogelgesang <
>> bernd.vogelges...@gmx.de> wrote:
>>
>>> Without testing I would say it's a bug. Quite some bugs went into 3.18
>>> unnoticed and unfortunately, it's not  communicated on the landing page.
>>> Next regular point release will be in 10 days, but for urgent stuff, you
>>> should better use 3.16.
>>>
>>>
>>> On 09.03.21 13:32, Martin Bittens wrot:
>>> > Hello QGIS User List, i
>>> >
>>> > I already sent this message but it was not posted, so it is here again.
>>> > Hopefully it works now.
>>> >
>>> >
>>> > I am still struggling with the problem creating a legend for a raster
>>> > layer. Usually I am working with the following settings in order to
>>> > colorize a calculated raster layer (e.g. after applying v.surf.idw on a
>>> > point data set):
>>> >
>>> > - rendering type: singleband pseudocolor
>>> >
>>> > - interpolation: linear
>>> >
>>> > - mode: equal interval
>>> >
>>> >
>>> > In QGIS 3.18.0:
>>> >
>>> > Selecting an appropriate color ramp and applying a 

Re: [QGIS-it-user] Mappa valori "dinamica"

[virtusmankind]

Devo ringraziare infinitamente sia robertomarzocchi per la guida velocissima
che totò per avermi letto nel pensiero, sarebbe stata la domanda
successiva!!!
Eccezionali, davvero!

P.s. Il comando funziona dalla versione 3.16 in avanti di QGis. Vale lo
stesso per QGis Server (3.16 e superiori??)





--
Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-Italian-User-f5250612.html
___
QGIS-it-user mailing list
QGIS-it-user@lists.osgeo.org
https://lists.osgeo.org/mailman/listinfo/qgis-it-user

[Qgis-user] Create circle with diameter in QGIS

[Madeline Krohn]

Dear QGIS Team,
I would like to create a circle whose diameter is 75 metres. I am using QGIS 
version 3.16.3-Hannover.
My procedure so far has been like this:1. create a new shapefile layer -> 
geometry type: polygon2. in edit mode of this layer: add circle with centre and 
another point--> How can I change the radius/diameter of the circle afterwards 
or is there another possibility to create a circle with diameter directly?
Thank you very much and best regardsMadeline


___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Combing Vector Layers - With Attributes

[Kirk Schmidt]

Hi Springer

You could try joining the databases using a common field assuming the 
second one does not have new point features.  However, I expect you are 
adding new point features.


In that case, I usually write a little python script to generate a new 
set of features in the update layer that matches those of the master 
layer.  I then recalculate the values of the new features before 
dropping the initial set of fields. You can use Graphical Modeler to 
generate a model and access through the Processing Toolbox> Models Group.


If you send me to sample shapefiles, I can put it together if you are 
not familiar with the Graphical Modeler.


Kirk Schmidt

On 3/12/2021 4:35 AM, Springfield Harrison wrote:

Hello All,

I have a master database (point shapefile) of trees to which I need to 
add new records frequently.  The two files have different (but 
similar) attribute lists.  I need to combine them and add the new 
attributes into the appropriate SHP database columns.


Copying and pasting records from the new file into the master list 
does work but if the fields are not identical, no attributes are 
brought into the master file.


Is there a way to import the new records into their corresponding 
fields in the master file?


I've searched for help on this to no avail.  Manifold GIS handles this 
very well, setting up a field matching dialogue but I would prefer to 
keep the process within QGIS.


Thanks very much for any ideas . . . .

-
Cheers, Springfield Harrison



___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user


--
Kirk Schmidt, MScF, BScF, RPF
General Manager
Nortek Resource Solutions Inc.
RR # 1
Thorburn, NS
B0K 1W0
Tel (902) 922.3607
Email: k...@nortekresources.com
Web: www.nortekresources.com

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [QGIS-it-user] QGIS le variabili e la privacy

[aborruso]

Ciao,
anche io penso che debba essere in opt-in (ovvero con l'utente che abilita
la cosa consapevolmente) e non in opt-out (con la cosa abilitata senza che
qualcuno l'abbia scelto).

Saluti



--
Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-Italian-User-f5250612.html
___
QGIS-it-user mailing list
QGIS-it-user@lists.osgeo.org
https://lists.osgeo.org/mailman/listinfo/qgis-it-user

Re: [Qgis-user] Create circle with diameter in QGIS

[C Hamilton]

Dear Madeline,

If you want to start with a point layer representing the center of the
circle, then you can use the Shape Tools plugin to create either a geodesic
ellipse or donut about the point. If you use the donut, just set the inner
radius to 0 and the outer radius to 37.5 meters. You can also pull the
radius you want to use from the attribute table. In QGIS there are multiple
ways to accomplish what you want to do so just pick what works easiest for
you.

Calvin

On Fri, Mar 12, 2021 at 8:09 AM Andreas Neumann  wrote:

> Hi Madeline,
>
> You need to enable the "Advanced Digitizing mode/panel". See
> https://docs.qgis.org/3.16/en/docs/user_manual/working_with_vector/editing_geometry_attributes.html#the-advanced-digitizing-panel
> for details.
>
> The shortcut "d" (distance) is your friend. When this mode is activated
> you can enter distances (like your radius) with the keyboard and QGIS will
> constrain to these values.
>
> You need to invest a bit of time to understand all the construction modes,
> but once you get it, it is quite powerful.
>
> Greetings,
>
> Andreas
>
> On 2021-03-12 13:37, Madeline Krohn wrote:
>
> Dear QGIS Team,
>
> I would like to create a circle whose diameter is 75 metres. I am using
> QGIS version 3.16.3-Hannover.
>
> My procedure so far has been like this:
> 1. create a new shapefile layer -> geometry type: polygon
> 2. in edit mode of this layer: add circle with centre and another point
> --> How can I change the radius/diameter of the circle afterwards or is
> there another possibility to create a circle with diameter directly?
>
> Thank you very much and best regards
> Madeline
>
>
>
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
>
>
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
>
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

[QGIS-it-user] Ritagliare raster ai Nodata

[pierluigi de rosa]

Buongiorno,

ho una domanda su QGIS per capire quale è la strada più semplice per
ritagliare un raster sui nodata.
Ho un raster che ai bordi contiene molti nodata che possono essere tolti
dal raster effettivo e renderlo più leggero da elaborare.
Come posso in QGIS ritagliare il raster sulle celle effettive diverse da
nodata?
So farlo facilmente in GRASS GIS (g.region zoom=) ma in QGIS non saprei.
Grazie
P

-- 
Ing. Pierluigi De Rosa (PhD in Earth Science)
Contract Professor of Geographic Information System at University of Perugia
cel: 3497558268 / fax: 075 7823038
skype: pierluigi.derosa
___
QGIS-it-user mailing list
QGIS-it-user@lists.osgeo.org
https://lists.osgeo.org/mailman/listinfo/qgis-it-user

Re: [Qgis-user] Create circle with diameter in QGIS

[Christine]

Dear Madeline,
you may start with a point layer : the point(s) as the mid point(s) of your
circle(s).
Then you can draw a buffer of a certain distance with the buffer tool
(geoprocessing tools) around your point(s). In case of a buffer for points
the distance is the same as the radius of the circle you are searching for. 

Attention: the segments parameter controls the number of line segments to
use in oder to approximate a circle when creating rounded offsets. More
segments mean a closer approximation. Be aware that a shapefile cannot save
a true circle by nature but only an approximation to a circle with straight
segments. 

With the multi-ring buffer tool you might create more than one buffer at a
time around your point(s), so you could get as many rings (circles) around
your point(s) as you like. Certainly you have to determine the distance
between the circles you want to get. The output of the buffer tools have
automatically a polygon geometry. 

Regards, Christine



Madeline Krohn wrote
> I would like to create a circle whose diameter is 75 metres. I am using
> QGIS version 3.16.3-Hannover.
> My procedure so far has been like this:1. create a new shapefile layer ->
> geometry type: polygon2. in edit mode of this layer: add circle with
> centre and another point--> How can I change the radius/diameter of the
> circle afterwards or is there another possibility to create a circle with
> diameter directly?





--
Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-User-f4125267.html
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Create circle with diameter in QGIS

[Andreas Neumann]

Ah - and don't forget that you need to finish the circle with the 
right-mouse button!


So the steps are (more or less):

- enable editing

- enable advanced digitizing tools (the button with square and ruler)

- enable the circle tool (e.g. "Add Circle by a Center Point and Another 
Point" tool)


- click in the canvas to set the circle center

- press "d" for distance and enter your radius (e.g. 5)

- press right mouse button to finish the circle

Hope this helps,

Andreas

On 2021-03-12 14:08, Andreas Neumann wrote:


Hi Madeline,

You need to enable the "Advanced Digitizing mode/panel". See 
https://docs.qgis.org/3.16/en/docs/user_manual/working_with_vector/editing_geometry_attributes.html#the-advanced-digitizing-panel 
for details.


The shortcut "d" (distance) is your friend. When this mode is activated 
you can enter distances (like your radius) with the keyboard and QGIS 
will constrain to these values.


You need to invest a bit of time to understand all the construction 
modes, but once you get it, it is quite powerful.


Greetings,

Andreas

On 2021-03-12 13:37, Madeline Krohn wrote:


Dear QGIS Team,

I would like to create a circle whose diameter is 75 metres. I am 
using QGIS version 3.16.3-Hannover.


My procedure so far has been like this:
1. create a new shapefile layer -> geometry type: polygon
2. in edit mode of this layer: add circle with centre and another 
point
--> How can I change the radius/diameter of the circle afterwards or 
is there another possibility to create a circle with diameter 
directly?


Thank you very much and best regards
Madeline

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user


___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

[Qgis-user] Plugin approval

[Jean-Baptiste Desbas]

Hi,

I receveid an email about plugin approvment few days ago, but the new
version is style marked as unapproved (submited 2021-02-22). Is there a
problem? Who can I contact about this?

Plugin arrayPlus approval by zimbogisgeek.
The plugin version "[1480] arrayPlus 1.7" is now approved
Link: http://plugins.qgis.org/plugins/arrayplus/

Regards,
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Create circle with diameter in QGIS

[Andreas Neumann]

Hi Madeline,

You need to enable the "Advanced Digitizing mode/panel". See 
https://docs.qgis.org/3.16/en/docs/user_manual/working_with_vector/editing_geometry_attributes.html#the-advanced-digitizing-panel 
for details.


The shortcut "d" (distance) is your friend. When this mode is activated 
you can enter distances (like your radius) with the keyboard and QGIS 
will constrain to these values.


You need to invest a bit of time to understand all the construction 
modes, but once you get it, it is quite powerful.


Greetings,

Andreas

On 2021-03-12 13:37, Madeline Krohn wrote:


Dear QGIS Team,

I would like to create a circle whose diameter is 75 metres. I am using 
QGIS version 3.16.3-Hannover.


My procedure so far has been like this:
1. create a new shapefile layer -> geometry type: polygon
2. in edit mode of this layer: add circle with centre and another point
--> How can I change the radius/diameter of the circle afterwards or is 
there another possibility to create a circle with diameter directly?


Thank you very much and best regards
Madeline

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] qgis server osgeo4w64 noobs question qgis server

[Marc Millas]

Nobody on this??

I need help
Thanks

Le jeu. 11 mars 2021 à 17:27, Marc Millas  a écrit :

> Hi, I just reinstall a full osgeo4W64 distro on a w10 machine. (with qgis
> 3.16.4)
> I have created 2 simple projects with qgis desktop
> 1) with only an osm standard map
> 2) with the same map+ 2 layers out of postgres12//postgis3.1  one layer
> polygon ; one layer  point
>
> I do setup the project qgisserver properties, so as to limit the size of
> the map , ...
>
> I have a fresh, working, apache24 installed on the same w10 machine
> (apache lounge distro)
>
> So, I try to follow some docs to test the qgisserver capabilities.
>
> I modified the http.conf file, and run the WMS getcapabilities test
> suggested in the doc. fine, I get an xml doc stating various things. ok.
>
> Then I try the getmap test using my just created qgis projects.
> 1) looks like that 3xx version of qgis server dont know the qgz format. So
> back to qgis to save each project in a qgs format. (I found nothing  in the
> doc about this)
> 2) now when I run the getmap test out of the same browser, I get a white
> rectangle of the size asked for in the getmap request, in a wholly black
> landscape.
>
> -looking at apache log, I found for each test a set of errors coming from
> qgis-mapserv.fcgi.exe saying that the .exe didnt found proj.db
> after a little internet digging, I did setup PROJ_LIB pointing to
> the C:\OSGeo4W64\share\proj
> directory where the osgeo installer put the proj.db file
>
> Rerun the getmap test.
> nothing changes.
>
> also if I run the getmap request with the qgis-server instead of the
> qgis_mapserv.fcgi.exe tool, I get a simple "url not found" apache message.
>
>
> looks like I need some help
> thanks,
> regards,
>
>
>
> Marc MILLAS
> Senior Architect
> +33607850334
> www.mokadb.com
>
>
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QGIS 3.18.0 ​Installer Detected as NirCmd Adware PUA by Antivirus

[Andrea Giudiceandrea]

Alyza Eileen Clare B. Villanueva wrote
> we were skeptical on the downloaded installer from
> https://www.qgis.org/en/site/forusers/download.html since it was detected
> as NirCmd Adware PUA by our Antivirus (Sophos Endpoint Security) during
> the installation process. 

Hi Alyza,
I wonder how you managed to download a 3.18.0 installer from from
https://www.qgis.org/en/site/forusers/download.html and exactly what
installer you have downloaded.

In fact, currently the download of the QGIS 3.18.0 standalone installers for
Windows (and macOS) is disabled from the normal download page
https://www.qgis.org/en/site/forusers/download.html and they are only
available for testing purpose through the https://qgis.org/downloads/ page
with the advise that is better to wait for a QGIS 3.18.1 release (that will
be released the next week).

It is not even possible to install QGIS 3.18.0 using the regular OSGeo4W
Network Installer at the moment.

Anyway, the Windows installers are digitally signed with the "The Open
Source Geospatial Foundation" certificate issued by DigiCert SHA2 Assured ID
Code Signing CA and they also came with a sha256 hash so you can check for
tampering or download errors.

If you check the installers available on https://qgis.org/downloads/ using
the VirusTotal web services www.virustotal.com, you'll find that no
antivirus software on that platform is detecting
QGIS-OSGeo4W-3.18.0-1-Setup-x86_64.exe as a virus or containing any PUAs.

If you double check that you downloaded the installer from
https://www.qgis.org/ and that it is digitally signed with corresponding
hash but your antivirus detects it as NirCmd Adware PUA, then you can try to
use, only for testing purpose (with the advise that is better to wait for a
QGIS 3.18.1 release), a new testing MSI installer for QGIS 3.18.0
QGIS-OSGeo4W-3.18.0-1.msi wihch is also available on
https://qgis.org/downloads/?C=M;O=D and is digitally signed and which
doesn't use the NirCmd tool in the installer.

Best regards.

Andrea Giudiceandrea



--
Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-User-f4125267.html
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [QGIS-it-user] datibenecomune.it - aderiamo come comunità??

[Totò]

Buongiorno, solo per tenerne traccia

https://www.youtube.com/watch?v=hxOHLrvUxNI

grazie



-
https://pigrecoinfinito.com/
--
Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-Italian-User-f5250612.html
___
QGIS-it-user mailing list
QGIS-it-user@lists.osgeo.org
https://lists.osgeo.org/mailman/listinfo/qgis-it-user

Re: [Qgis-user] Raster Layer Symbology Problem

[Martin Bittens]

Hello Sebastian,

thank you for your response. Yes indeed, for me the coloring style you
showed would be an option. This style is what I get in GRASS GIS as
well. But,

what I would prefer in QGIS is this (as provided by QGIS 3.16.4 LTR):


So I hope that in future QGIS versions, the user will have the choice
between the different display options. As far as I understood the
discussions in the links you sent there is something going on in order
to add an option for selecting the new  or the old display style.
Unfortunately, I am not an expert in that programming stuff and
therefore I don't know how to apply what there is explained. I will wait
and see what the next QGIS versions offer for displaying raster gradient
legends. And I will keep the QGIS 3.16.4 LTR with special care not
loosing the display style I showed above.


Regards


Martin


Am 3/10/2021 um 5:54 PM schrieb Sebastian Gutwein:

Martin,
I agree with your assessment.
I assume the assumption of the designers (thank you Nyall Dawson et al
for all of your amazing work) was that if you were displaying a
continuous raster you would want a continuous legend as well.
As shown by your issue and in the links I shared with you the reality
is that this doesn't fit all use cases.
I am considering writing up a feature request to address those issues.
Unless you want to?
To help me understand your use case more would a legend that was
continuous but had numerical values at each "break" work for you? An
example of this is in this tutorial
https://www.ecodiv.earth/post/legend-for-continuous-raster-in-qgis-composer/

image.png

-Bas

On Wed, Mar 10, 2021 at 2:34 PM Martin Bittens mailto:martin.bitt...@gmx.de>> wrote:

Sebastian, Bernd,

thanks a lot for your response. I checked the links Sebastian
sent. As far as I could see displaying data in the legend as a
continuum is a new feature in QGIS 3.18 which replaced the
previous method displaying data in the legend as categories (as
QGIS 3.16.4 is still doing - fortunately. Otherwise it would be
difficult producing maps in ongoing projects in a consistent
layout). And obviously there is no option available switching
between the old and the new display method. Personally I think it
was not a good decision giving up completely the categorical
display in the legend. In particular if you would work with
multiple colors and a large range of values, there is no way to
allocate map colors to the corresponding values, or vice versa.

So, I hope that the next QGIS version will include an option which
allows selecting the method how to  display the data, as continuum
or categorized.


Regards

Martin


Am 3/9/2021 um 4:18 PM schrieb Sebastian Gutwein:

Martin,
I think this may be the result of the new feature

https://qgis.org/en/site/forusers/visualchangelog318/#feature-gradient-ramp-based-legends


Which is exciting for me becasue that is how I would like to have
my continious data display. But it sounds like that is not what
you are interested in. I have not tried 3.18 myself so don't know
if there is a workaround.
It does look like there are some links to discussions in the
comments of this stack exchange question.

gis.stackexchange.com/questions/388843/qgis-3-18-override-raster-gradient-legends



gis.stackexchange.com/questions/388154/how-to-get-back-discrete-raster-legend-symbols-in-qgis-3-16


twitter.com/ThomasG77/status/1365255399927140355



On Tue, Mar 9, 2021 at 7:54 AM Bernd Vogelgesang
mailto:bernd.vogelges...@gmx.de>> wrote:

Without testing I would say it's a bug. Quite some bugs went
into 3.18
unnoticed and unfortunately, it's not  communicated on the
landing page.
Next regular point release will be in 10 days, but for urgent
stuff, you
should better use 3.16.


On 09.03.21 13:32, Martin Bittens wrot:
> Hello QGIS User List, i
>
> I already sent this message but it was not posted, so it is
here again.
> Hopefully it works now.
>
>
> I am still struggling with the problem creating a legend
for a raster
> layer. Usually I am working with the following settings in
order to
> colorize a calculated raster layer (e.g. after applying
v.surf.idw on a
> point data set):
>
> - rendering type: singleband pseudocolor
>
> - interpolation: linear
 

Re: [Qgis-user] QIGS icon for MacOS

[Ujaval Gandhi]

Love it. Nice facelift to the most used app on my mac :)
https://ibb.co/z6CWKh0
[image: Logo] 
Ujaval Gandhi
Spatial Thoughts
mobile: +91-8095684687
email: uja...@spatialthoughts.com
[image: LinkedIn icon]   [image:
Twitter icon] 



On Fri, Mar 12, 2021 at 3:45 PM Christoph Jung  wrote:

> Hi Ricardo,
>
> This icon looks great, well done :)
>
> Regards,
> Christoph
>
> > Am 12.03.2021 um 10:38 schrieb Ricardo Rodrigues :
> >
> > Hi!
> >
> > I've created, I think, a new QIGS icon for MacOS, Big Sur style (
> https://github.com/qgis/QGIS/files/6128912/QGIS.icns.zip).
> >
> > If you want to try it, you are welcome.
> >
> >
> > Best regards,
> >
> >Ricardo
> >
> > ___
> > Qgis-user mailing list
> > Qgis-user@lists.osgeo.org
> > List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> > Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
>
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

[Qgis-user] Access database via cmd

[Karl Magnus Jönsson]

Hi!
Good news! Thanks. I wonder if you tried to connect to a PostGIS database from 
command line. As a parameter. In graphical mode it works and looks like:

'postgres://dbname=\'geodb\' host=servername port=5432 user=\'user\' 
password=\'pwd\' sslmode=disable key=\'UNIK\' estimatedmetadata=true srid=3008 
type=PolygonZ checkPrimaryKeyUnicity=\'1\' table=\"pri\".\"byggnad_\" (geom)'

If it's possible in cmd I don't know how to format it properly.

Karl-Magnus Jönsson


-Ursprungligt meddelande-
Från: Qgis-user  För Christoph Jung
Skickat: den 12 mars 2021 06:50
Till: Nyall Dawson 
Kopia: qgis-user 
Ämne: Re: [Qgis-user] Save log to file via cmd

That’s great, Nyall. Thank you for your effort :)

Regards,
Christoph 

> Am 11.03.2021 um 23:46 schrieb Nyall Dawson :
> 
> On Tue, 9 Mar 2021 at 00:41, Christoph Jung  wrote:
>> 
>> Hello everyone,
>> 
>> I created a model and added the function “Save log to file” at the end of my 
>> model. If I start the model directly in the QGIS application, it works fine 
>> (the log file will be created and contains information).
>> 
>> Now I want to call this model from the command line to schedule this task. I 
>> created a batch file, setting up the osgeo4w environment and calling the 
>> model via qgis_processing-qgis-ltr in this script. The log file will be 
>> created, but there is no information in it. There is no error message or 
>> something else in the command prompt too. Does anybody has an idea how I 
>> could get the information in my log files when I call my model via command 
>> line?
> 
> Thanks, fixed here: https://github.com/qgis/QGIS/pull/42208/files
> 
> Nyall
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [QGIS-it-user] Mappa valori "dinamica"

[Marco Spaziani]

Chiarissimo e utilissimo ...come sempre

Il giorno ven 12 mar 2021 alle ore 11:08 Totò 
ha scritto:

> virtusmankind wrote
> > Buonasera a tutti, ho un nuovo quesito.
> > Sto predisponendo un piccolo progetto nel quale l'utente può disegnare un
> > oggetto in un layer (ad es. una strada) e popolare i diversi attributi
> > previsti, tra cui il nome della stessa.
> > In seconda battuta l'utilizzatore vorrebbe popolare un secondo tematismo
> > (ad
> > es. i numeri civici). Mi piacerebbe che il campo "indirizzo" non fosse un
> > campo libero, ma pescasse dal primo layer i valori degli indirizzi già
> > presenti.
> >
> > E' possibile far ciò?
>
> Ciao, sì è possibile tramite l'uso dei Widget.
> In questo caso per popolare il campo indirizzo del layer civici, io userei
> il widget Predefiniti con l'espressione: (per QGIS >=3.16)
> overlay_nearest(  layer:='strade', expression:="name")[0]
>
> che pescherebbe, come descrivo nel video [1], il nome della strada più
> vicina la punto.
>
> Esistono altre vie come per esempio i trigger, ma è altra storia.
>
> saluti
>
> [1] https://youtu.be/S4Dr7_0K_SU
>
>
>
> -
> https://pigrecoinfinito.com/
> --
> Sent from:
> http://osgeo-org.1560.x6.nabble.com/QGIS-Italian-User-f5250612.html
> ___
> QGIS-it-user mailing list
> QGIS-it-user@lists.osgeo.org
> https://lists.osgeo.org/mailman/listinfo/qgis-it-user
>
___
QGIS-it-user mailing list
QGIS-it-user@lists.osgeo.org
https://lists.osgeo.org/mailman/listinfo/qgis-it-user

Re: [Qgis-user] GRASS provider not working

[Stefano Campus]

you have to run:
C:\OSGeo4W64\bin\qgis-grass7.bat

s.



--
Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-User-f4125267.html
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [QGIS-it-user] Mappa valori "dinamica"

[Roberto Marzocchi]

Puoi usare "relazione valore" che prende i dati da un altro layer del tuo 
progetto. 

Unico limite (non per te) il layer deve essere incluso nel progetto 



R


  

Eng. Roberto Marzocchi, PhD

CTO - Chief Technology Officer

Gter srl (Unige spin-off)

Via Ruffini 9R - 16128 Genova 

http://P.IVA/CF 01998770992 

ph: 010-0899150 - mob: 349-8786575 

E-mail: mailto:roberto.marzoc...@gter.it -  http://www.gter.it 



-- 

Gter social 

http://www.twitter.com/Gteronline - http://www.facebook.com/Gteronline 

http://www.linkedin.com/company/gter-srl-innovazione-in-geomatica-gnss-e-gis 




- 

Please consider the environment before printing this email! 





 On gio, 11 mar 2021 18:20:58 +0100 mailto:gas1...@libero.it  wrote 

Buonasera a tutti, ho un nuovo quesito. 
Sto predisponendo un piccolo progetto nel quale l'utente può disegnare un 
oggetto in un layer (ad es. una strada) e popolare i diversi attributi 
previsti, tra cui il nome della stessa. 
In seconda battuta l'utilizzatore vorrebbe popolare un secondo tematismo (ad 
es. i numeri civici). Mi piacerebbe che il campo "indirizzo" non fosse un 
campo libero, ma pescasse dal primo layer i valori degli indirizzi già 
presenti. 
Attraverso QGis esiste la funzione "Mappa valori" all'interno del Modulo 
attributi, che mi permette di caricare i dati dal vettore. Il mio problema è 
che ora i due layer sono entrambi vuoti, mentre io vorrei che man mano che 
si popolassero i dati del primo layer (Strade) nel campo indirizzo, 
automaticamente la mappa valori del secondo layer (Civici) suggerisse le vie 
inserite nel primo layer. 
E' possibile far ciò? 
 
P.s. Sto lavorando in db Postgresql, ma credo che anche con uno shapefile la 
procedura possa essere analoga. 
Grazie a tutti. 
 
 
 
-- 
Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-Italian-User-f5250612.html 
___ 
QGIS-it-user mailing list 
mailto:QGIS-it-user@lists.osgeo.org 
https://lists.osgeo.org/mailman/listinfo/qgis-it-user___
QGIS-it-user mailing list
QGIS-it-user@lists.osgeo.org
https://lists.osgeo.org/mailman/listinfo/qgis-it-user

Re: [Qgis-user] QIGS icon for MacOS

[Christoph Jung]

Hi Ricardo,

This icon looks great, well done :)

Regards,
Christoph 

> Am 12.03.2021 um 10:38 schrieb Ricardo Rodrigues :
> 
> Hi!
> 
> I've created, I think, a new QIGS icon for MacOS, Big Sur style 
> (https://github.com/qgis/QGIS/files/6128912/QGIS.icns.zip).
> 
> If you want to try it, you are welcome.
> 
> 
> Best regards,
> 
>Ricardo
> 
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [QGIS-it-user] Mappa valori "dinamica"

[Totò]

virtusmankind wrote
> Buonasera a tutti, ho un nuovo quesito.
> Sto predisponendo un piccolo progetto nel quale l'utente può disegnare un
> oggetto in un layer (ad es. una strada) e popolare i diversi attributi
> previsti, tra cui il nome della stessa. 
> In seconda battuta l'utilizzatore vorrebbe popolare un secondo tematismo
> (ad
> es. i numeri civici). Mi piacerebbe che il campo "indirizzo" non fosse un
> campo libero, ma pescasse dal primo layer i valori degli indirizzi già
> presenti. 
> 
> E' possibile far ciò? 

Ciao, sì è possibile tramite l'uso dei Widget.
In questo caso per popolare il campo indirizzo del layer civici, io userei
il widget Predefiniti con l'espressione: (per QGIS >=3.16)
overlay_nearest(  layer:='strade', expression:="name")[0]

che pescherebbe, come descrivo nel video [1], il nome della strada più
vicina la punto.

Esistono altre vie come per esempio i trigger, ma è altra storia.

saluti

[1] https://youtu.be/S4Dr7_0K_SU



-
https://pigrecoinfinito.com/
--
Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-Italian-User-f5250612.html
___
QGIS-it-user mailing list
QGIS-it-user@lists.osgeo.org
https://lists.osgeo.org/mailman/listinfo/qgis-it-user

Re: [Qgis-user] Combing Vector Layers - With Attributes

[Bo Victor Thomsen]

You can use processing algorithm "refactor fields" on the layer(s) that 
have fields to be changed. This operation will give you a temporary 
file/layer the same number of columns and -names as the original layer, 
but with column type(s) redefined by you.


Afterwards you can merge the temporary file/layer with the other layers

Just be sure to have the latest (functioning) version of QGIS installed: 
3.16.3. From the error message you included, I suspect you have an older 
version of QGIS installed. I tried to merge 2 layers using QGIS 3.16.3 
and the result was a new layer that contained the merged layers. If 
there was a data discrepancy the result values were null's (but no 
run-time errors)


Med venlig hilsen / Kind regards

Bo Victor Thomsen

Den 12-03-2021 kl. 10:04 skrev Springfield Harrison:


Thanks Bo,

I tried a sample run but it failed:

"TAG field in layer Tree Table All 2 PntType has different data type 
than in other layers (String instead of integer)


Execution failed after 1.20 seconds"

It looks like it can't handle differing data types and won't offer 
choices for merging fields.  I wonder if there are other tools?


Thanks again . . . .

-
Cheers, Spring


On 12/Mar/2021 00:48, Bo Victor Thomsen wrote:

Menu "Vector" -> "Data management tools" -> "Merge vector layers"

Med venlig hilsen / Kind regards

Bo Victor Thomsen

Den 12-03-2021 kl. 09:35 skrev Springfield Harrison:

t shapefile) of trees to which I n

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [QGIS-it-user] QGIS le variabili e la privacy

[gbai]

All'interno del progetto QGIS è presente un tag strutturato come segue:

/
Mario Rossi
2021-03-08T18:56:16
/

da cui ritengo @project_author estragga l'informazione.
Il tag può contenere informazioni personali (quali nome e cognome) e tali
informazioni possono essere distribuite insieme al progetto senza che
l'utente ne sia consapevole.
Sarebbe probabilmente più corretto consentire all'utente di inserire
volontarimente i propri dati in un form nelle opzioni, qualora lo desideri,
o altrimenti di rimanere anonimo. 



--
Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-Italian-User-f5250612.html
___
QGIS-it-user mailing list
QGIS-it-user@lists.osgeo.org
https://lists.osgeo.org/mailman/listinfo/qgis-it-user

Re: [Qgis-user] Cannot Edit File Geodatabases

[Thomas Struller]

Hi Tyler,

i had this effect at that moment I try to edit older geodatabases. To edit a 
geodatabase it has to be one of arcgis 10.0 and younger. In case you want to 
edit a older one you have to upgrade the geodatabase in arccatalog – properties.


Mit freundlichen Grüßen


Thomas Struller
Diplom Geologe (Univ.), BDG, V18

Sachverständiger nach BBodSchG §18,
SG1 Historische Recherche
SG2 Pfad Boden – Gewässer
Akademischer Geoinformatiker




Tel:0049 911 12076 111
Mobil:  0049 170 33 20 494
Mail:   thomas.strul...@lga-geo.de


 LGA Institut für Umweltgeologie und Altlasten GmbH
 Christian-Hessel-Straße 1
 90427 Nürnberg
 i...@lga-geo.de
 www.LGA-geo.de








Handelsregister: AmtsG Nürnberg HRB 18895
Umsatzst.-IdNr.:DE219281492
StNr.:  241/131/30489

Geschäftsführer: Carlo Schillinger, Dr. Jürgen Kisskalt
<>___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

[Qgis-user] QIGS icon for MacOS

[Ricardo Rodrigues]

Hi!

I've created, I think, a new QIGS icon for MacOS, Big Sur style 
(https://github.com/qgis/QGIS/files/6128912/QGIS.icns.zip).

If you want to try it, you are welcome.


Best regards,

Ricardo

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Combing Vector Layers - With Attributes

[Springfield Harrison]

It looks like I have:

QGIS version



3.10.10-A Coruña

Would I need a higher version? Thanks . . . . .

-
Cheers, Spring




On 12/Mar/2021 01:19, DelazJ wrote:

Hi,

Le ven. 12 mars 2021 à 10:04, Springfield Harrison 
mailto:stellar...@gmail.com>> a écrit :


Thanks Bo,

I tried a sample run but it failed:

"TAG field in layer Tree Table All 2 PntType has different data
type than in other layers (String instead of integer)

Execution failed after 1.20 seconds"

It looks like it can't handle differing data types and won't offer
choices for merging fields.  I wonder if there are other tools?

What is your version of QGIS? This has been fixed somewhere >3.10 
(https://docs.qgis.org/3.16/en/docs/user_manual/processing_algs/qgis/vectorgeneral.html#merge-vector-layers)


Regards,
Harrissou

Thanks again . . . .

-
Cheers, Spring



On 12/Mar/2021 00:48, Bo Victor Thomsen wrote:

Menu "Vector" -> "Data management tools" -> "Merge vector layers"

Med venlig hilsen / Kind regards

Bo Victor Thomsen

Den 12-03-2021 kl. 09:35 skrev Springfield Harrison:

t shapefile) of trees to which I n

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org 
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org 
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Combing Vector Layers - With Attributes

[DelazJ]

Hi,

Le ven. 12 mars 2021 à 10:04, Springfield Harrison  a
écrit :

> Thanks Bo,
>
> I tried a sample run but it failed:
>
> "TAG field in layer Tree Table All 2 PntType has different data type than
> in other layers (String instead of integer)
>
> Execution failed after 1.20 seconds"
>
> It looks like it can't handle differing data types and won't offer choices
> for merging fields.  I wonder if there are other tools?
>
What is your version of QGIS? This has been fixed somewhere >3.10 (
https://docs.qgis.org/3.16/en/docs/user_manual/processing_algs/qgis/vectorgeneral.html#merge-vector-layers
)

Regards,
Harrissou

> Thanks again . . . .
>
> -
> Cheers, Spring
>
>
>
> On 12/Mar/2021 00:48, Bo Victor Thomsen wrote:
>
> Menu "Vector" -> "Data management tools" -> "Merge vector layers"
>
> Med venlig hilsen / Kind regards
>
> Bo Victor Thomsen
>
> Den 12-03-2021 kl. 09:35 skrev Springfield Harrison:
>
> t shapefile) of trees to which I n
>
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
>
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
>
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Combing Vector Layers - With Attributes

[Springfield Harrison]

Thanks Bo,

I tried a sample run but it failed:

"TAG field in layer Tree Table All 2 PntType has different data type 
than in other layers (String instead of integer)


Execution failed after 1.20 seconds"

It looks like it can't handle differing data types and won't offer 
choices for merging fields.  I wonder if there are other tools?


Thanks again . . . .

-
Cheers, Spring



On 12/Mar/2021 00:48, Bo Victor Thomsen wrote:

Menu "Vector" -> "Data management tools" -> "Merge vector layers"

Med venlig hilsen / Kind regards

Bo Victor Thomsen

Den 12-03-2021 kl. 09:35 skrev Springfield Harrison:

t shapefile) of trees to which I n

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Combing Vector Layers - With Attributes

[Bo Victor Thomsen]

Menu "Vector" -> "Data management tools" -> "Merge vector layers"

Med venlig hilsen / Kind regards

Bo Victor Thomsen

Den 12-03-2021 kl. 09:35 skrev Springfield Harrison:

t shapefile) of trees to which I n

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QGIS 3.18.0 ​Installer Detected as NirCmd Adware PUA by Antivirus

[Alyza Eileen Clare B. Villanueva]

Hello Ms. Andrea,

Good Day.

Thank you for the inputs.

We have downloaded the on this website https://www.qgis.org/en/site/ using by 
clicking the "Download Now" for Version 3.18.0 which we were able to download 
the "QGIS-OSGeo4W-3.18.0-1-Setup-x86_64" installer with a file size of 390 MB, 
this installer was downloaded last February 25, 2021.


We are looking forward for the stable release of QGIS Version 3.18.1 next week.


Regards,
Alyza Villanueva

-Original Message-
From: Qgis-user  On Behalf Of Andrea 
Giudiceandrea
Sent: Friday, 12 March 2021 3:52 PM
To: qgis-user@lists.osgeo.org
Subject: Re: [Qgis-user] QGIS 3.18.0 ​Installer Detected as NirCmd Adware PUA 
by Antivirus

Alyza Eileen Clare B. Villanueva wrote
> we were skeptical on the downloaded installer from
> https://www.qgis.org/en/site/forusers/download.html since it was
> detected as NirCmd Adware PUA by our Antivirus (Sophos Endpoint
> Security) during the installation process.

Hi Alyza,
I wonder how you managed to download a 3.18.0 installer from from 
https://www.qgis.org/en/site/forusers/download.html and exactly what installer 
you have downloaded.

In fact, currently the download of the QGIS 3.18.0 standalone installers for 
Windows (and macOS) is disabled from the normal download page 
https://www.qgis.org/en/site/forusers/download.html and they are only available 
for testing purpose through the https://qgis.org/downloads/ page with the 
advise that is better to wait for a QGIS 3.18.1 release (that will be released 
the next week).

It is not even possible to install QGIS 3.18.0 using the regular OSGeo4W 
Network Installer at the moment.

Anyway, the Windows installers are digitally signed with the "The Open Source 
Geospatial Foundation" certificate issued by DigiCert SHA2 Assured ID Code 
Signing CA and they also came with a sha256 hash so you can check for tampering 
or download errors.

If you check the installers available on https://qgis.org/downloads/ using the 
VirusTotal web services www.virustotal.com, you'll find that no antivirus 
software on that platform is detecting QGIS-OSGeo4W-3.18.0-1-Setup-x86_64.exe 
as a virus or containing any PUAs.

If you double check that you downloaded the installer from 
https://www.qgis.org/ and that it is digitally signed with corresponding hash 
but your antivirus detects it as NirCmd Adware PUA, then you can try to use, 
only for testing purpose (with the advise that is better to wait for a QGIS 
3.18.1 release), a new testing MSI installer for QGIS 3.18.0 
QGIS-OSGeo4W-3.18.0-1.msi wihch is also available on 
https://qgis.org/downloads/?C=M;O=D and is digitally signed and which doesn't 
use the NirCmd tool in the installer.

Best regards.

Andrea Giudiceandrea



--
Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-User-f4125267.html
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
The contents of this e-mail and any files transmitted with it may contain 
private, privileged, and/or confidential information and are intended solely 
for the named addressee/s. If you have received this e-mail in error, please 
immediately alert the sender by reply e-mail then delete from your system this 
email as well as your reply email, including all attachments, if any. If you 
are not the intended recipient, please know that the unauthorized access, 
reproduction, disclosure, and distribution of this e-mail and/or any of its 
attachments or any information contained therein is strictly prohibited and is 
specifically punishable under Republic Act No. 8792 or the Electronic Commerce 
Act and Republic Act No. 10173 or the Data Privacy Act of 2012.
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

[Qgis-user] Combing Vector Layers - With Attributes

[Springfield Harrison]

Hello All,

I have a master database (point shapefile) of trees to which I need to 
add new records frequently.  The two files have different (but similar) 
attribute lists.  I need to combine them and add the new attributes into 
the appropriate SHP database columns.


Copying and pasting records from the new file into the master list does 
work but if the fields are not identical, no attributes are brought into 
the master file.


Is there a way to import the new records into their corresponding fields 
in the master file?


I've searched for help on this to no avail.  Manifold GIS handles this 
very well, setting up a field matching dialogue but I would prefer to 
keep the process within QGIS.


Thanks very much for any ideas . . . .

-
Cheers, Springfield Harrison



___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [QGIS-it-user] QGIS le variabili e la privacy

[Totò]

Totò wrote
> Secondo voi è normale?

Forse non è tanto normale, faccio altro esempio:
LibreOffice non raccoglie info sull'utente e sul PC e occorre impostare
personalmente i dati affinche LibreOffice posso visualizzarle nei documenti
che produce.
Quindi è l'utente che deve, tramite le opzioni, popolare i Dati utente:

 

saluti



-
https://pigrecoinfinito.com/
--
Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-Italian-User-f5250612.html
___
QGIS-it-user mailing list
QGIS-it-user@lists.osgeo.org
https://lists.osgeo.org/mailman/listinfo/qgis-it-user