RE: [QUAD-L] Ramp Problems
no, it’s an in floor ramp. spoke w/ a gentleman yesterday who said the tracks that are accessible through the service panel which is on driver’s side underneath the van probably need to be cleaned and then lubricated with a high pressure silicone lubricant called lithium grease. We’re going to try that today…….praying it fixes it J Nicki From: gah17...@aol.com [mailto:gah17...@aol.com] Sent: Thursday, February 12, 2015 1:23 PM To: zoocr...@windstream.net Subject: Re: [QUAD-L] Ramp Problems Hi, I don't think IMS uses hydraulics, I think they are all electric. It is probably a limit switch, but I'm not familiar with the 2002. The 2002 is a ramp that you can push open and it unfolds in an emergency, right? I don't think the bearings are your issue. In a message dated 2/11/2015 4:08:07 P.M. Central Standard Time, zoocr...@windstream.net writes: If I win the Oklahoma powerball tonight I won’t need this answered but since that probably isn’t going to happen……….. I have a 2002 Dodge Grand Caravan IMS Rampvan 1. my ramp isn’t coming all the way out and isn’t pulling all the way back in (probably 1” to 1 ½” off)……..any ideas? 2. I need to replace 5 roller bearings that are under the ramp and wonder if I can buy somewhere…..they are a about 7/8” long, roller/bearing is just over ½” in diameter and have CRS – 8 O2R 10RR on them I have pictures of the roller bearings if any of you think you can help me then I can email them to you Thanks Nicki C5/6
Re: [QUAD-L] Ramp Problems
When using a power-washer, cover any electric motors and components in plastic to protect them. Make sure that all rocks, sand, road tars and debris are removed. A dry lube is better than wet lubing that may attract dust and debris. Best Wishes -Original Message- From: nichole rohling zoocr...@windstream.net To: Gah17582 gah17...@aol.com; quad-list quad-list@eskimo.com Sent: Fri, Feb 13, 2015 11:47 am Subject: RE: [QUAD-L] Ramp Problems no, it’s an in floor ramp. spoke w/ a gentleman yesterday who said the tracks that are accessible through the service panel which is on driver’s side underneath the van probably need to be cleaned and then lubricated with a high pressure silicone lubricant called lithium grease. We’re going to try that today…….praying it fixes it J Nicki From: gah17...@aol.com [mailto:gah17...@aol.com] Sent: Thursday, February 12, 2015 1:23 PM To: zoocr...@windstream.net Subject: Re: [QUAD-L] Ramp Problems Hi, I don't think IMS uses hydraulics, I think they are all electric. It is probably a limit switch, but I'm not familiar with the 2002. The 2002 is a ramp that you can push open and it unfolds in an emergency, right? I don't think the bearings are your issue. In a message dated 2/11/2015 4:08:07 P.M. Central Standard Time, zoocr...@windstream.net writes: If I win the Oklahoma powerball tonight I won’t need this answered but since that probably isn’t going to happen……….. I have a 2002 Dodge Grand Caravan IMS Rampvan 1. my ramp isn’t coming all the way out and isn’t pulling all the way back in (probably 1” to 1 ½” off)……..any ideas? 2. I need to replace 5 roller bearings that are under the ramp and wonder if I can buy somewhere…..they are a about 7/8” long, roller/bearing is just over ½” in diameter and have CRS – 8 O2R 10RR on them I have pictures of the roller bearings if any of you think you can help me then I can email them to you Thanks Nicki C5/6
RE: [QUAD-L] Ramp Problems
My brother did what he could, lots of dust and rocks (I live on a dirt road) and it is working…….sounds much better praying it stays fixed for awhile From: wheelch...@aol.com [mailto:wheelch...@aol.com] Sent: Friday, February 13, 2015 4:43 PM To: zoocr...@windstream.net; gah17...@aol.com; quad-list@eskimo.com Subject: Re: [QUAD-L] Ramp Problems When using a power-washer, cover any electric motors and components in plastic to protect them. Make sure that all rocks, sand, road tars and debris are removed. A dry lube is better than wet lubing that may attract dust and debris. Best Wishes -Original Message- From: nichole rohling zoocr...@windstream.net To: Gah17582 gah17...@aol.com; quad-list quad-list@eskimo.com Sent: Fri, Feb 13, 2015 11:47 am Subject: RE: [QUAD-L] Ramp Problems no, it’s an in floor ramp. spoke w/ a gentleman yesterday who said the tracks that are accessible through the service panel which is on driver’s side underneath the van probably need to be cleaned and then lubricated with a high pressure silicone lubricant called lithium grease. We’re going to try that today…….praying it fixes it J Nicki From: gah17...@aol.com [mailto:gah17...@aol.com mailto:gah17...@aol.com? ] Sent: Thursday, February 12, 2015 1:23 PM To: zoocr...@windstream.net Subject: Re: [QUAD-L] Ramp Problems Hi, I don't think IMS uses hydraulics, I think they are all electric. It is probably a limit switch, but I'm not familiar with the 2002. The 2002 is a ramp that you can push open and it unfolds in an emergency, right? I don't think the bearings are your issue. In a message dated 2/11/2015 4:08:07 P.M. Central Standard Time, zoocr...@windstream.net writes: If I win the Oklahoma powerball tonight I won’t need this answered but since that probably isn’t going to happen……….. I have a 2002 Dodge Grand Caravan IMS Rampvan 1. my ramp isn’t coming all the way out and isn’t pulling all the way back in (probably 1” to 1 ½” off)……..any ideas? 2. I need to replace 5 roller bearings that are under the ramp and wonder if I can buy somewhere…..they are a about 7/8” long, roller/bearing is just over ½” in diameter and have CRS – 8 O2R 10RR on them I have pictures of the roller bearings if any of you think you can help me then I can email them to you Thanks Nicki C5/6
Re: [QUAD-L] Ramp Problems
Sometimes lifts act up when low on hydraulic fluid.may have that checked if you have not yet. Dan*** On Wednesday, February 11, 2015 4:28 PM, wheelch...@aol.com wheelch...@aol.com wrote: Bearing Headquarters. They have locations all over North American. I'm hoping that you are looking at the side of the bearings to obtain the number for replacement. Best Wishes -Original Message- From: nichole rohling zoocr...@windstream.net To: quad-list quad-list@eskimo.com Sent: Wed, Feb 11, 2015 4:08 pm Subject: [QUAD-L] Ramp Problems If I win the Oklahoma powerball tonight I won’t need this answered but since that probably isn’t going to happen……….. I have a 2002 Dodge Grand Caravan IMS Rampvan 1. my ramp isn’t coming all the way out and isn’t pulling all the way back in (probably 1” to 1 ½” off)……..any ideas? 2. I need to replace 5 roller bearings that are under the ramp and wonder if I can buy somewhere…..they are a about 7/8” long, roller/bearing is just over ½” in diameter and have CRS – 8 O2R 10RR on them I have pictures of the roller bearings if any of you think you can help me then I can email them to you Thanks Nicki C5/6
[QUAD-L] Ramp Problems
If I win the Oklahoma powerball tonight I wont need this answered but since that probably isnt going to happen .. I have a 2002 Dodge Grand Caravan IMS Rampvan 1. my ramp isnt coming all the way out and isnt pulling all the way back in (probably 1 to 1 ½ off) ..any ideas? 2. I need to replace 5 roller bearings that are under the ramp and wonder if I can buy somewhere ..they are a about 7/8 long, roller/bearing is just over ½ in diameter and have CRS 8 O2R 10RR on them I have pictures of the roller bearings if any of you think you can help me then I can email them to you Thanks Nicki C5/6
RE: [QUAD-L] Ramp Problems
VERY LIKELY…….never have had it checked, no one at the dealer ever mentioned it either. I suppose it would be accessed by removing the panel on the bottom of the ramp cover under van?? From: Danny Hearn [mailto:ddh...@sbcglobal.net] Sent: Wednesday, February 11, 2015 5:36 PM To: wheelch...@aol.com; zoocr...@windstream.net; quad-list@eskimo.com Subject: Re: [QUAD-L] Ramp Problems Sometimes lifts act up when low on hydraulic fluid.may have that checked if you have not yet. Dan*** On Wednesday, February 11, 2015 4:28 PM, wheelch...@aol.com wheelch...@aol.com wrote: Bearing Headquarters. They have locations all over North American. I'm hoping that you are looking at the side of the bearings to obtain the number for replacement. Best Wishes -Original Message- From: nichole rohling zoocr...@windstream.net To: quad-list quad-list@eskimo.com Sent: Wed, Feb 11, 2015 4:08 pm Subject: [QUAD-L] Ramp Problems If I win the Oklahoma powerball tonight I won’t need this answered but since that probably isn’t going to happen……….. I have a 2002 Dodge Grand Caravan IMS Rampvan 1. my ramp isn’t coming all the way out and isn’t pulling all the way back in (probably 1” to 1 ½” off)……..any ideas? 2. I need to replace 5 roller bearings that are under the ramp and wonder if I can buy somewhere…..they are a about 7/8” long, roller/bearing is just over ½” in diameter and have CRS – 8 O2R 10RR on them I have pictures of the roller bearings if any of you think you can help me then I can email them to you Thanks Nicki C5/6
Re: [QUAD-L] Ramp Problems
Bearing Headquarters. They have locations all over North American. I'm hoping that you are looking at the side of the bearings to obtain the number for replacement. Best Wishes -Original Message- From: nichole rohling zoocr...@windstream.net To: quad-list quad-list@eskimo.com Sent: Wed, Feb 11, 2015 4:08 pm Subject: [QUAD-L] Ramp Problems If I win the Oklahoma powerball tonight I won’t need this answered but since that probably isn’t going to happen……….. I have a 2002 Dodge Grand Caravan IMS Rampvan 1. my ramp isn’t coming all the way out and isn’t pulling all the way back in (probably 1” to 1 ½” off)……..any ideas? 2. I need to replace 5 roller bearings that are under the ramp and wonder if I can buy somewhere…..they are a about 7/8” long, roller/bearing is just over ½” in diameter and have CRS – 8 O2R 10RR on them I have pictures of the roller bearings if any of you think you can help me then I can email them to you Thanks Nicki C5/6