Re: (RADIATOR) Ascend MAX and PPP
Hello! I have managed to solve my problem. After doing what you mentioned in your email, I also need to add in one more set of identical DEFAULT entries but making use of Service-Type = Login User instead of Frame User as the check item. There is nothing wrong with the config of my Ascend MAX 4060. Thanks alot for your assistance! Quoting Hugh Irvine [EMAIL PROTECTED]: Hello Chen - I am very new to Radiator and encountered this funny problem and is wondering if anyone can help me with it. I am using Radiator-2.14.1 . Basically, I have an Ascend MAX 4060 which allows users to dialin in and access the Internet via PPP. Windows95 users have no problem dialing in via the dialup networking BUT users who manually dialin and then type PPP at the ascend% prompt after they have logined are given this message :- Requested Service is Not Authorized! I used to have no problems when using Radius-2.x . Which Radius is this? Radius-2.0.1 from Livingston. Here is my corresponding /etc/raddb/defuser file which I included from my radius.cfg :- DEFAULT Service-Type = Framed-User Framed-Protocol = PPP, Framed-IP-Netmask = 255.255.255.0, Framed-Routing = None, Framed-MTU = 1500, Framed-Compression = Van-Jacobson-TCP-IP I notice in your DEFAULT user above that the only Check item is Service-Type = Framed-User This will never match a command line request from the NAS. Also note that many Hmm... if I am making use of the authentication to a MySQL database, what should I put in my "defuser" file for the DEFAULT entry? Auth-Type=SQL ? What should be the "normal" and necessary stuff that I should put in my defuser file? NAS's (Cisco's notably) also require a Reply item of Service-Type = Framed-User in addition to the rest of the Reply items. And here is my radius.cfg :- Foreground LogStdout DbDir /etc/raddb ClientListSQL DBSourcexx DBUsername xx DBAuth xx /ClientListSQL Log SQL DBSourcexx DBUsername xx DBAuth xx /Log Realm DEFAULT MaxSessions 1 AuthBy SQL # Adjust DBSource, DBUsername, DBAuth to suit your DB DBSourcexx DBUsername xx DBAuth xx AuthColumnDef 0, Encrypted-Password, check # You may want to tailor these for your ACCOUNTING table AccountingTable ACCOUNTING AcctColumnDef USERNAME,User-Name AcctColumnDef TIME_STAMP,Timestamp,integer AcctColumnDef ACCTSTATUSTYPE,Acct-Status-Type AcctColumnDef ACCTDELAYTIME,Acct-Delay-Time,integer AcctColumnDef ACCTINPUTOCTETS,Acct-Input-Octets,integer AcctColumnDef ACCTOUTPUTOCTETS,Acct-Output-Octets,integer AcctColumnDef ACCTSESSIONID,Acct-Session-Id AcctColumnDef ACCTSESSIONTIME,Acct-Session-Time,integer AcctColumnDef ACCTTERMINATECAUSE,Acct-Terminate-Cause AcctColumnDef NASIDENTIFIER,NAS-Identifier AcctColumnDef NASPORT,NAS-Port,integer AcctColumnDef FRAMEDIPADDRESS,Framed-Address /AuthBy AuthBy FILE Filename /etc/raddb/defuser /AuthBy /Realm I also notice in your Realm DEFAULT that you do not have an AuthByPolicy declaration - this means that you will never execute the AuthBy FILE. I added in AuthByPolicy ContinueWhileAccept in Realm DEFAULT but I still cannot get to start ppp from the ascend% prompt. "Auto login" under Win95 works just as fine but this time round, I cannot even get to the ascend% prompt with me being prompted Access Denied after I keyed in my username and password. The same goes for when I added in "Identifier System" into my Authby SQL and then used Auth-Type=System in my defuser file. The above situation occurs with the user not being able to login manually. Any clues? I think we should take a look at your problem from the beginning, as I am not clear on how you wish to operate Radiator. Could you tell me what information you wish to keep in your SQL database? And what other information you require? Also what different types of users you have and what they are allowed to do? I will be able to answer your questions much more directly with the above information. thanks Hugh -- Radiator: the most portable, flexible and configurable RADIUS server anywhere. SQL, proxy, DBM, files, LDAP, NIS+, password, NT, Emerald, Platypus, Freeside, TACACS+, PAM, external, etc etc on Unix, Win95/8, NT, Rhapsody
Re: (RADIATOR) Ascend MAX and PPP
Hello! Quoting Hugh Irvine [EMAIL PROTECTED]: Hello Chen - On Wed, 25 Aug 1999, Chen Shiyuan wrote: Hello! I am very new to Radiator and encountered this funny problem and is wondering if anyone can help me with it. I am using Radiator-2.14.1 . Basically, I have an Ascend MAX 4060 which allows users to dialin in and access the Internet via PPP. Windows95 users have no problem dialing in via the dialup networking BUT users who manually dialin and then type PPP at the ascend% prompt after they have logined are given this message :- Requested Service is Not Authorized! I used to have no problems when using Radius-2.x . Which Radius is this? Radius-2.0.1 from Livingston. Here is my corresponding /etc/raddb/defuser file which I included from my radius.cfg :- DEFAULT Service-Type = Framed-User Framed-Protocol = PPP, Framed-IP-Netmask = 255.255.255.0, Framed-Routing = None, Framed-MTU = 1500, Framed-Compression = Van-Jacobson-TCP-IP I notice in your DEFAULT user above that the only Check item is Service-Type = Framed-User This will never match a command line request from the NAS. Also note that many Hmm... if I am making use of the authentication to a MySQL database, what should I put in my "defuser" file for the DEFAULT entry? Auth-Type=SQL ? What should be the "normal" and necessary stuff that I should put in my defuser file? NAS's (Cisco's notably) also require a Reply item of Service-Type = Framed-User in addition to the rest of the Reply items. And here is my radius.cfg :- Foreground LogStdout DbDir /etc/raddb ClientListSQL DBSourcexx DBUsername xx DBAuth xx /ClientListSQL Log SQL DBSourcexx DBUsername xx DBAuth xx /Log Realm DEFAULT MaxSessions 1 AuthBy SQL # Adjust DBSource, DBUsername, DBAuth to suit your DB DBSourcexx DBUsername xx DBAuth xx AuthColumnDef 0, Encrypted-Password, check # You may want to tailor these for your ACCOUNTING table AccountingTable ACCOUNTING AcctColumnDef USERNAME,User-Name AcctColumnDef TIME_STAMP,Timestamp,integer AcctColumnDef ACCTSTATUSTYPE,Acct-Status-Type AcctColumnDef ACCTDELAYTIME,Acct-Delay-Time,integer AcctColumnDef ACCTINPUTOCTETS,Acct-Input-Octets,integer AcctColumnDef ACCTOUTPUTOCTETS,Acct-Output-Octets,integer AcctColumnDef ACCTSESSIONID,Acct-Session-Id AcctColumnDef ACCTSESSIONTIME,Acct-Session-Time,integer AcctColumnDef ACCTTERMINATECAUSE,Acct-Terminate-Cause AcctColumnDef NASIDENTIFIER,NAS-Identifier AcctColumnDef NASPORT,NAS-Port,integer AcctColumnDef FRAMEDIPADDRESS,Framed-Address /AuthBy AuthBy FILE Filename /etc/raddb/defuser /AuthBy /Realm I also notice in your Realm DEFAULT that you do not have an AuthByPolicy declaration - this means that you will never execute the AuthBy FILE. I added in AuthByPolicy ContinueWhileAccept in Realm DEFAULT but I still cannot get to start ppp from the ascend% prompt. "Auto login" under Win95 works just as fine but this time round, I cannot even get to the ascend% prompt with me being prompted Access Denied after I keyed in my username and password. The same goes for when I added in "Identifier System" into my Authby SQL and then used Auth-Type=System in my defuser file. The above situation occurs with the user not being able to login manually. Any clues? Thanks alot! ___ ___ _ _ / __)/ __)( \/ ) Chen ShiyuanH/P : 96802564 ( (__ \__ \ \ / [EMAIL PROTECTED] P/G : 92231871 \___)(___/ (__) Network Administrator Hwa Chong Junior College === Archive at http://www.thesite.com.au/~radiator/ To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe radiator' in the body of the message.
Re: (RADIATOR) Ascend MAX and PPP
Hello Chen - I am very new to Radiator and encountered this funny problem and is wondering if anyone can help me with it. I am using Radiator-2.14.1 . Basically, I have an Ascend MAX 4060 which allows users to dialin in and access the Internet via PPP. Windows95 users have no problem dialing in via the dialup networking BUT users who manually dialin and then type PPP at the ascend% prompt after they have logined are given this message :- Requested Service is Not Authorized! I used to have no problems when using Radius-2.x . Which Radius is this? Radius-2.0.1 from Livingston. Here is my corresponding /etc/raddb/defuser file which I included from my radius.cfg :- DEFAULT Service-Type = Framed-User Framed-Protocol = PPP, Framed-IP-Netmask = 255.255.255.0, Framed-Routing = None, Framed-MTU = 1500, Framed-Compression = Van-Jacobson-TCP-IP I notice in your DEFAULT user above that the only Check item is Service-Type = Framed-User This will never match a command line request from the NAS. Also note that many Hmm... if I am making use of the authentication to a MySQL database, what should I put in my "defuser" file for the DEFAULT entry? Auth-Type=SQL ? What should be the "normal" and necessary stuff that I should put in my defuser file? NAS's (Cisco's notably) also require a Reply item of Service-Type = Framed-User in addition to the rest of the Reply items. And here is my radius.cfg :- Foreground LogStdout DbDir /etc/raddb ClientListSQL DBSourcexx DBUsername xx DBAuth xx /ClientListSQL Log SQL DBSourcexx DBUsername xx DBAuth xx /Log Realm DEFAULT MaxSessions 1 AuthBy SQL # Adjust DBSource, DBUsername, DBAuth to suit your DB DBSourcexx DBUsername xx DBAuth xx AuthColumnDef 0, Encrypted-Password, check # You may want to tailor these for your ACCOUNTING table AccountingTable ACCOUNTING AcctColumnDef USERNAME,User-Name AcctColumnDef TIME_STAMP,Timestamp,integer AcctColumnDef ACCTSTATUSTYPE,Acct-Status-Type AcctColumnDef ACCTDELAYTIME,Acct-Delay-Time,integer AcctColumnDef ACCTINPUTOCTETS,Acct-Input-Octets,integer AcctColumnDef ACCTOUTPUTOCTETS,Acct-Output-Octets,integer AcctColumnDef ACCTSESSIONID,Acct-Session-Id AcctColumnDef ACCTSESSIONTIME,Acct-Session-Time,integer AcctColumnDef ACCTTERMINATECAUSE,Acct-Terminate-Cause AcctColumnDef NASIDENTIFIER,NAS-Identifier AcctColumnDef NASPORT,NAS-Port,integer AcctColumnDef FRAMEDIPADDRESS,Framed-Address /AuthBy AuthBy FILE Filename /etc/raddb/defuser /AuthBy /Realm I also notice in your Realm DEFAULT that you do not have an AuthByPolicy declaration - this means that you will never execute the AuthBy FILE. I added in AuthByPolicy ContinueWhileAccept in Realm DEFAULT but I still cannot get to start ppp from the ascend% prompt. "Auto login" under Win95 works just as fine but this time round, I cannot even get to the ascend% prompt with me being prompted Access Denied after I keyed in my username and password. The same goes for when I added in "Identifier System" into my Authby SQL and then used Auth-Type=System in my defuser file. The above situation occurs with the user not being able to login manually. Any clues? I think we should take a look at your problem from the beginning, as I am not clear on how you wish to operate Radiator. Could you tell me what information you wish to keep in your SQL database? And what other information you require? Also what different types of users you have and what they are allowed to do? I will be able to answer your questions much more directly with the above information. thanks Hugh -- Radiator: the most portable, flexible and configurable RADIUS server anywhere. SQL, proxy, DBM, files, LDAP, NIS+, password, NT, Emerald, Platypus, Freeside, TACACS+, PAM, external, etc etc on Unix, Win95/8, NT, Rhapsody === Archive at http://www.thesite.com.au/~radiator/ To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe radiator' in the body of the message.
(RADIATOR) Ascend MAX and PPP
Hello! I am very new to Radiator and encountered this funny problem and is wondering if anyone can help me with it. I am using Radiator-2.14.1 . Basically, I have an Ascend MAX 4060 which allows users to dialin in and access the Internet via PPP. Windows95 users have no problem dialing in via the dialup networking BUT users who manually dialin and then type PPP at the ascend% prompt after they have logined are given this message :- Requested Service is Not Authorized! I used to have no problems when using Radius-2.x . Here is my corresponding /etc/raddb/defuser file which I included from my radius.cfg :- DEFAULT Service-Type = Framed-User Framed-Protocol = PPP, Framed-IP-Netmask = 255.255.255.0, Framed-Routing = None, Framed-MTU = 1500, Framed-Compression = Van-Jacobson-TCP-IP And here is my radius.cfg :- Foreground LogStdout DbDir /etc/raddb ClientListSQL DBSourcexx DBUsername xx DBAuth xx /ClientListSQL Log SQL DBSourcexx DBUsername xx DBAuth xx /Log Realm DEFAULT MaxSessions 1 AuthBy SQL # Adjust DBSource, DBUsername, DBAuth to suit your DB DBSourcexx DBUsername xx DBAuth xx AuthColumnDef 0, Encrypted-Password, check # You may want to tailor these for your ACCOUNTING table AccountingTable ACCOUNTING AcctColumnDef USERNAME,User-Name AcctColumnDef TIME_STAMP,Timestamp,integer AcctColumnDef ACCTSTATUSTYPE,Acct-Status-Type AcctColumnDef ACCTDELAYTIME,Acct-Delay-Time,integer AcctColumnDef ACCTINPUTOCTETS,Acct-Input-Octets,integer AcctColumnDef ACCTOUTPUTOCTETS,Acct-Output-Octets,integer AcctColumnDef ACCTSESSIONID,Acct-Session-Id AcctColumnDef ACCTSESSIONTIME,Acct-Session-Time,integer AcctColumnDef ACCTTERMINATECAUSE,Acct-Terminate-Cause AcctColumnDef NASIDENTIFIER,NAS-Identifier AcctColumnDef NASPORT,NAS-Port,integer AcctColumnDef FRAMEDIPADDRESS,Framed-Address /AuthBy AuthBy FILE Filename /etc/raddb/defuser /AuthBy /Realm Does anyone have any idea how I can solve my problems? I need to solve it urgently. Many thanks for your time and assistance! === Archive at http://www.thesite.com.au/~radiator/ To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe radiator' in the body of the message.
(RADIATOR) Ascend MAX and PPP
Hello! I am very new to Radiator and encountered this funny problem and is wondering if anyone can help me with it. I am using Radiator-2.14.1 . Basically, I have an Ascend MAX 4060 which allows users to dialin in and access the Internet via PPP. Windows95 users have no problem dialing in via the dialup networking BUT users who manually dialin and then type PPP at the ascend% prompt after they have logined are given this message :- Requested Service is Not Authorized! I used to have no problems when using Radius-2.x . Here is my corresponding /etc/raddb/defuser file which I included from my radius.cfg :- DEFAULT Service-Type = Framed-User Framed-Protocol = PPP, Framed-IP-Netmask = 255.255.255.0, Framed-Routing = None, Framed-MTU = 1500, Framed-Compression = Van-Jacobson-TCP-IP And here is my radius.cfg :- Foreground LogStdout DbDir /etc/raddb ClientListSQL DBSourcexx DBUsername xx DBAuth xx /ClientListSQL Log SQL DBSourcexx DBUsername xx DBAuth xx /Log Realm DEFAULT MaxSessions 1 AuthBy SQL # Adjust DBSource, DBUsername, DBAuth to suit your DB DBSourcexx DBUsername xx DBAuth xx AuthColumnDef 0, Encrypted-Password, check # You may want to tailor these for your ACCOUNTING table AccountingTable ACCOUNTING AcctColumnDef USERNAME,User-Name AcctColumnDef TIME_STAMP,Timestamp,integer AcctColumnDef ACCTSTATUSTYPE,Acct-Status-Type AcctColumnDef ACCTDELAYTIME,Acct-Delay-Time,integer AcctColumnDef ACCTINPUTOCTETS,Acct-Input-Octets,integer AcctColumnDef ACCTOUTPUTOCTETS,Acct-Output-Octets,integer AcctColumnDef ACCTSESSIONID,Acct-Session-Id AcctColumnDef ACCTSESSIONTIME,Acct-Session-Time,integer AcctColumnDef ACCTTERMINATECAUSE,Acct-Terminate-Cause AcctColumnDef NASIDENTIFIER,NAS-Identifier AcctColumnDef NASPORT,NAS-Port,integer AcctColumnDef FRAMEDIPADDRESS,Framed-Address /AuthBy AuthBy FILE Filename /etc/raddb/defuser /AuthBy /Realm Does anyone have any idea how I can solve my problems? I need to solve it urgently. Many thanks for your time and assistance! === Archive at http://www.thesite.com.au/~radiator/ To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe radiator' in the body of the message.
Re: (RADIATOR) Ascend MAX and PPP
Hello Chen - On Wed, 25 Aug 1999, Chen Shiyuan wrote: Hello! I am very new to Radiator and encountered this funny problem and is wondering if anyone can help me with it. I am using Radiator-2.14.1 . Basically, I have an Ascend MAX 4060 which allows users to dialin in and access the Internet via PPP. Windows95 users have no problem dialing in via the dialup networking BUT users who manually dialin and then type PPP at the ascend% prompt after they have logined are given this message :- Requested Service is Not Authorized! I used to have no problems when using Radius-2.x . Which Radius is this? Here is my corresponding /etc/raddb/defuser file which I included from my radius.cfg :- DEFAULT Service-Type = Framed-User Framed-Protocol = PPP, Framed-IP-Netmask = 255.255.255.0, Framed-Routing = None, Framed-MTU = 1500, Framed-Compression = Van-Jacobson-TCP-IP I notice in your DEFAULT user above that the only Check item is Service-Type = Framed-User This will never match a command line request from the NAS. Also note that many NAS's (Cisco's notably) also require a Reply item of Service-Type = Framed-User in addition to the rest of the Reply items. And here is my radius.cfg :- Foreground LogStdout DbDir /etc/raddb ClientListSQL DBSourcexx DBUsername xx DBAuth xx /ClientListSQL Log SQL DBSourcexx DBUsername xx DBAuth xx /Log Realm DEFAULT MaxSessions 1 AuthBy SQL # Adjust DBSource, DBUsername, DBAuth to suit your DB DBSourcexx DBUsername xx DBAuth xx AuthColumnDef 0, Encrypted-Password, check # You may want to tailor these for your ACCOUNTING table AccountingTable ACCOUNTING AcctColumnDef USERNAME,User-Name AcctColumnDef TIME_STAMP,Timestamp,integer AcctColumnDef ACCTSTATUSTYPE,Acct-Status-Type AcctColumnDef ACCTDELAYTIME,Acct-Delay-Time,integer AcctColumnDef ACCTINPUTOCTETS,Acct-Input-Octets,integer AcctColumnDef ACCTOUTPUTOCTETS,Acct-Output-Octets,integer AcctColumnDef ACCTSESSIONID,Acct-Session-Id AcctColumnDef ACCTSESSIONTIME,Acct-Session-Time,integer AcctColumnDef ACCTTERMINATECAUSE,Acct-Terminate-Cause AcctColumnDef NASIDENTIFIER,NAS-Identifier AcctColumnDef NASPORT,NAS-Port,integer AcctColumnDef FRAMEDIPADDRESS,Framed-Address /AuthBy AuthBy FILE Filename /etc/raddb/defuser /AuthBy /Realm I also notice in your Realm DEFAULT that you do not have an AuthByPolicy declaration - this means that you will never execute the AuthBy FILE. See Section 6.19.1 in the Radiator 2.14.1 reference manual. Does anyone have any idea how I can solve my problems? I need to solve it urgently. hth Hugh -- Radiator: the most portable, flexible and configurable RADIUS server anywhere. SQL, proxy, DBM, files, LDAP, NIS+, password, NT, Emerald, Platypus, Freeside, TACACS+, PAM, external, etc etc on Unix, Win95/8, NT, Rhapsody === Archive at http://www.thesite.com.au/~radiator/ To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe radiator' in the body of the message.
