Re: [Repeater-Builder] VXR7000UD UHF, Fiplex Duplexers, ARR Receive Pre-Amp On Ebay
John, this can be done with the CE27 software from Vertex. Setting the frequency boundaries and rx tuning are described in the 'CE27 EEPROM Programmming Software Reference Manual - Supervisor Edition'. I assume You have got this from Vertex since You are an approved dealer for this equipement. regards, ---per At 02:32 16.12.2005, Maire-Radios wrote: being a Vertex dealer, at this time there is not a factory program available in the US that will let you program the VXR-7000UD into the 440 ham band. If there is anyone on the board that has a fix that works please let me know. At one time about 2 years+ ago I talked to a person that said he had a factory ver. that would let you do this. The copy he sent me I could never get to work and it was the same as my dealer copy. Thanks and if there is a way of doing this please let me know. thanks John - Original Message - From: n2len [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Thursday, December 15, 2005 4:24 PM Subject: [Repeater-Builder] VXR7000UD UHF, Fiplex Duplexers, ARR Receive Pre-Amp On Ebay http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemitem=5843001065 Thank you... Yahoo! Groups Links Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] VXR7000UD UHF, Fiplex Duplexers, ARR Receive Pre-Amp On Ebay
thanks for the info the only books we have on the 7000 is when the repeater first came out. I will check on others today. - Original Message - From: Per Molund [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Friday, December 16, 2005 7:03 AM Subject: Re: [Repeater-Builder] VXR7000UD UHF, Fiplex Duplexers, ARR Receive Pre-Amp On Ebay John, this can be done with the CE27 software from Vertex. Setting the frequency boundaries and rx tuning are described in the 'CE27 EEPROM Programmming Software Reference Manual - Supervisor Edition'. I assume You have got this from Vertex since You are an approved dealer for this equipement. regards, ---per At 02:32 16.12.2005, Maire-Radios wrote: being a Vertex dealer, at this time there is not a factory program available in the US that will let you program the VXR-7000UD into the 440 ham band. If there is anyone on the board that has a fix that works please let me know. At one time about 2 years+ ago I talked to a person that said he had a factory ver. that would let you do this. The copy he sent me I could never get to work and it was the same as my dealer copy. Thanks and if there is a way of doing this please let me know. thanks John - Original Message - From: n2len [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Thursday, December 15, 2005 4:24 PM Subject: [Repeater-Builder] VXR7000UD UHF, Fiplex Duplexers, ARR Receive Pre-Amp On Ebay http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemitem=5843001065 Thank you... Yahoo! Groups Links Yahoo! Groups Links Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Micor and ICS Controller
Hi all, I have been fighting with a problem now for 2 days and must be missing something! I have a micor repeater with a Station card and a ICS controller and I am triggering the controller cos from the Squelch Ind pin 5 on the old squelch gate board connector. I am using the Ptt out to the rptr PTT with a mosfet to ground the transmitter osc. Discriminator is coming from pin 10 of the old Squelch gate Card connector. Now here is what is happening 1. Trip squelch Pin 5 goes high 2. Ics Controller trips repeater 3. Receiver Pin 5 goes low and stays low until transmitter unkeys Of course that keeps the transmitter keyed until I manually unkey the radio. I also notice that there is no audio from the receiver either. If I put the squelch gate card back in and a station card everything works fine as far as keying and repeating. Maybe something is telling the reciever to stop or rf is getting into the receiver somehow shutting down the squelch ind. Any help or thoghts. Thanks Steve Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Re: Micor and ICS Controller
Sorry about the spelling! I did not check it on the last post. What I have found is that when the transmitter is keyed the squelch Un- squelched R1 Pin 5 on the gate card and down on the receiver J2 show that the voltage disappears. Any suggestions? Steve Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Motorola ELPA Module Box Power Amplifier SGTF 1045A 859-894 MHz
Motorola ELPA Module Box Power Amplifier SGTF 1045A 859-894 MHz I have questions - does anyone have answers? All I know about this unit is that it's an expandable linear power amplifier and designed for 869-894 MHz. Seems like it puts out up to 600 watts - 4 transistors x150 watts/each and takes 26 VDC. It was given to me so I have no money in it. I would like to use it for 910.25 MHz (plus and minus 4.5 MHz) for HAM TV with FM audio. Can anybody help? Bil K1ATV Mesa AZ Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
RE: [Repeater-Builder] Micor and ICS Controller
I am having a slightly different issue with a unified chassis micor. In bone-stock configuration, it works flawlessly, except that the transmitter never drops, until I momentarily key the machine manually using the station control card. Then all is well... it drops. Key it with an inbound signal and it does the same thing over and over... As of yet I haven't been able to find the cause... Unified chassis with only a station control card and squelch gate card. Any hints as to where I should look?? thanks, mike -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] Behalf Of Ronnie Steve Rice Sent: Friday, December 16, 2005 10:51 AM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Micor and ICS Controller Hi all, I have been fighting with a problem now for 2 days and must be missing something! I have a micor repeater with a Station card and a ICS controller and I am triggering the controller cos from the Squelch Ind pin 5 on the old squelch gate board connector. I am using the Ptt out to the rptr PTT with a mosfet to ground the transmitter osc. Discriminator is coming from pin 10 of the old Squelch gate Card connector. Now here is what is happening 1. Trip squelch Pin 5 goes high 2. Ics Controller trips repeater 3. Receiver Pin 5 goes low and stays low until transmitter unkeys Of course that keeps the transmitter keyed until I manually unkey the radio. I also notice that there is no audio from the receiver either. If I put the squelch gate card back in and a station card everything works fine as far as keying and repeating. Maybe something is telling the reciever to stop or rf is getting into the receiver somehow shutting down the squelch ind. Any help or thoghts. Thanks Steve Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Still Wanted - Motorola KXN1052 Ch Elements
Still looking for a couple of Motorola Micor UHF station KXN1052 channel elements. If you have a couple that you'd sell me, please drop me a note off-list. Thanks de John .. Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Micor and ICS Controller
Search for bad PNP transistors.On 12/16/05, Mike Perryman [EMAIL PROTECTED] wrote: I am having a slightly different issue with a unified chassis micor.Inbone-stock configuration, it works flawlessly, except that the transmitter never drops, until I momentarily key the machine manually using the stationcontrol card.Then all is well...it drops.Key it with an inbound signaland it does the same thing over and over...As of yet I haven't been able to find the cause... Unified chassis with only a station control card and squelch gate card.Anyhints as to where I should look??thanks,mike-Original Message-From: Repeater-Builder@yahoogroups.com[mailto:Repeater-Builder@yahoogroups.com]On Behalf Of Ronnie SteveRiceSent: Friday, December 16, 2005 10:51 AM To: Repeater-Builder@yahoogroups.comSubject: [Repeater-Builder] Micor and ICS ControllerHi all, I have been fighting with a problem now for 2 days and must be missing something! I have a micor repeater with a Station cardand a ICS controller and I am triggering the controller cos from theSquelch Ind pin 5 on the old squelch gate board connector. I amusing the Ptt out to the rptr PTT with a mosfet to ground the transmitter osc. Discriminator is coming from pin 10 of the oldSquelch gate Card connector. Now here is what is happening1. Trip squelch Pin 5 goes high2. Ics Controller trips repeater3. Receiver Pin 5 goes low and stays low until transmitter unkeys Of course that keeps the transmitter keyed until I manually unkeythe radio. I also notice that there is no audio from the receivereither.If I put the squelch gate card back in and a station card everything works fine as far as keying and repeating.Maybe something is telling the reciever to stop or rf is gettinginto the receiver somehow shutting down the squelch ind. Any help orthoghts. Thanks Steve Yahoo! Groups LinksYahoo! Groups Links* To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/* To unsubscribe from this group, send an email to:[EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to:http://docs.yahoo.com/info/terms/ YAHOO! GROUPS LINKS Visit your group "Repeater-Builder" on the web. To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Re: [Repeater-Builder] Still Wanted - Motorola KXN1052 Ch Elements
John Burch wrote: Still looking for a couple of Motorola Micor UHF station KXN1052 channel elements. If you have a couple that you'd sell me, please drop me a note off-list. If you cannot find any KXN1052A's, KXN1019B's will work in their place. *To my knowledge* the only difference between the two bands is in the series resistance from the splatter filter (on the exciter) to the modulator. Why? The modulation of the UHF exciter is tripled and therefore needs to be only 1/3 of that of VHF, therefore the KXN1019B will work just fine, it may just provide more modulation capability; and *may* require the mechanical position of the IDC control to be set lower if using a KXN1019B. Remember, the Micor UHF Station uses a VHF exciter. *I don't know* if the resistance is in the element or the exciter. It may likely be that the UHF exciter has more resistance and there is no difference between elements, I don't know. Kevin Custer Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Lots of Stuff for Sale (Pictures upon request)
Henry Radio Solid State Repeater Amplifier. 220 MHZ 1-5 in 100 out, Rack Mount, Model C100B02R, Full Output, Good working order. $400 + Shipping from West Coast 93420. 220 MHZ Repeater: Hamtronics Receiver and Transmitter. 223.14-224.74 w/Crystal Ovens, Rack Mounted. Super sensitive RX and 1 watt TX. $300 + Shipping from West Coast 93420 Wacom 220 Duplexer Model WP652. 4 Cavity. Just removed from working System. Half price at $400 + Shipping from West Coast 93420 Icom Band Units: UX-49A 440 Band Unit, UX-39A 220 Band Unit, UX-29H 144 Band Unit. These units have very low hours on them $225 each + shipping from West Coast 93420 FC-900 Icom Band Unit Interface: Made by ACC for remote control of all functions. $150 + shipping from West Coast 93420 Repeater/ Remote Base Controller, RC-96: All Options, Delayed Audio, TT encoder/decoder Voice Talkback with Huge Vocabulary. Too many functions to list. Works great with the FC-900 Icom Band unit controller. I've got over 2K in this setup. $750 + shipping from West Coast 93420 440 Repeater: GE Masterpro RX and Hamtronics with Oven TX. Set up as a 443.750+ Repeater.$200 Shipping from West Coast 93420 Telewave Model TPRD-4544, UHF 400-500 mhz Repeater Duplexer: Rack Mount 4-cavity in excellent condition, $400 + shipping from West Coast 93420 Hewlett Packard 400 MHZ Digitizing Scope Model 54504A: Excellent to Mint condition. Fresh out of a Lab. Used very little but calibrated regularly. $995 + shipping from West Coast 93420 Jerry WB6NYS .. Want HF Mobile Amp; Retiring and going RVing Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Lots of Stuff for Sale (Pictures upon request)
On 16 Dec 2005 at 20:41, Jerry Sanders wrote: Henry Radio Solid State Repeater Amplifier. 220 MHZ 1-5 in 100 out, Rack Mount, Model C100B02R, Full Output, Good working order. $400 + Shipping from West Coast 93420. Can we do any better on this price ? like inc shipping ? any books ? need pic's and age if we can dela its sold ! address at rac.ca web site Hate to put my addy in email Rick Rick Szajkowski VA3 RZS Charlotte Darby VA3 CMR Node Owners of IRLP Node 2120 147.300 + VA3 OME 224.420 - VA3 OME Part of The Omeme Amateur Radio Club Peterborough Ont. Canada Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Re: Micor Base Station parts
Anybody have some spare IPA decks from the Micor high power UHF stations. This item is the panel mounted assembly which is connected to the input to the PA assembly/deck. We especially need the active RF amplifier(s) Ed Com / Rad Inc Des Plaines, IL Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Anybody have a Motorola 1200 Manual?
I'm looking for a manual for my Motorola 1200AX service monitor. I bought it from a fellow ham a few months ago, and the manual sat underwater when his home was tragically flooded as a result of Katrina (and poorly designed levees). He said it swole to phone book size and the pages stuck together, so needless to say, I need to find another copy. I've looked on the web, but so far the only one I've found cost more than I paid for the service monitor. Any help will be appreciated. 73 de K5IQ Bob Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Anybody have a Motorola 1200 Manual?
I have a manual, but it is not one I can part with. If you need specific info I could scan/copy the section and get it to you. Copying the entire manual would be cost prohibitive. 73, Kevin K9HX At 08:47 PM 12/16/2005, you wrote: I'm looking for a manual for my Motorola 1200AX service monitor. I bought it from a fellow ham a few months ago, and the manual sat underwater when his home was tragically flooded as a result of Katrina (and poorly designed levees). He said it swole to phone book size and the pages stuck together, so needless to say, I need to find another copy. I've looked on the web, but so far the only one I've found cost more than I paid for the service monitor. Any help will be appreciated. 73 de K5IQ Bob Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Info On putting a link radio on a r1225 repeater
Hi Group Can anyone help me?? I am wonting to put a link motorola Maxtrac on my R1225 Repeater Useing the Link option that it has with the Programming and I cant find any Info on useing the Link option other than the help files. (The manual has nothing in it about this That I can Find) What Im wonting help with is how do I Set this up?? Do i just set the repeater for Link and the Maxtrac (Link Radio) for Link in the Address section of the programming In the radio Mode Section? are is there some custom setting i need to do with the Pin programming?? I was going to use a RICK cable(I know i wont need all the Pins but I have one I going to use) If anyone has this set up and it is a vhf 50 Watt R1225 Unit(Are a copy of a 10 watt Unit) Will you be so kind to please send me a copy of your Codeplug and are any Info you have on this? It sure would help me out. Thanks Freddy Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
RE: [Repeater-Builder] Micor and ICS Controller
Steve, Do you know there is a ICS message board on Yahoo? Do a search on ICS under Yahoo groups and you will find it. Paul WB5IDM -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] Behalf Of Ronnie Steve Rice Sent: Friday, December 16, 2005 9:51 AM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Micor and ICS Controller Hi all, I have been fighting with a problem now for 2 days and must be missing something! I have a micor repeater with a Station card and a ICS controller and I am triggering the controller cos from the Squelch Ind pin 5 on the old squelch gate board connector. I am using the Ptt out to the rptr PTT with a mosfet to ground the transmitter osc. Discriminator is coming from pin 10 of the old Squelch gate Card connector. Now here is what is happening 1. Trip squelch Pin 5 goes high 2. Ics Controller trips repeater 3. Receiver Pin 5 goes low and stays low until transmitter unkeys Of course that keeps the transmitter keyed until I manually unkey the radio. I also notice that there is no audio from the receiver either. If I put the squelch gate card back in and a station card everything works fine as far as keying and repeating. Maybe something is telling the reciever to stop or rf is getting into the receiver somehow shutting down the squelch ind. Any help or thoghts. Thanks Steve Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Thank You!!
For those of you that have donated toward the upkeep of the Repeater Builder Website, I take this time to thank you. I have tried to email a response to everyone that has sent a PayPal donation, and I have sent thank-you cards to those of you who have sent a donation in the mail. Please note, this is not a request for support of this email list, as it is free to both you and I; it's for the RBTIP website: http://www.repeater-builder.com/ If you haven't donated yet and would like to, we could still use a little help. PayPal accepted at: [EMAIL PROTECTED] kuggie at kuggie dot com Regular mail donations (check, MO, cash, whatever) to: Kevin Custer 1143 Coleman Station Road Friedens PA 15541 Thanks again, Kevin Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Lots of Stuff for Sale (Pictures upon request)
On Dec 16, 2005, at 1:41 PM, Jerry Sanders wrote: Wacom 220 Duplexer Model WP652. 4 Cavity. Just removed from working System. Half price at $400 + Shipping from West Coast 93420 Jerry WB6NYS .. Want HF Mobile Amp; Retiring and going RVing Jerry, If it's not already spoken-for, I'll take the 220 duplexer. Retiring and going RV'ing sounds fun. I think I'll have to wait another 25 years or so, though... darn! I'll send you a note off-list with contact info. Nate WY0X Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Re: Micor and ICS Controller
Yes I do Paul. The problem seems to be with the way I am connecting the controller as it is being a real pain! Not sure it is the controller yet but will have a good idea tomorrow or Sunday as I am going to try an alternative. I am using Carrier squelch to test with before hooking up a tn34 board for tone. The ICS controller is the Single M and the vote is still out on it! Thanks Steve --- In Repeater-Builder@yahoogroups.com, Paul Finch [EMAIL PROTECTED] wrote: Steve, Do you know there is a ICS message board on Yahoo? Do a search on ICS under Yahoo groups and you will find it. Paul WB5IDM Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] . . . - - - . . . . . . - - - . . .
Hi all Subject: CLEARTONE CM-7500 ( UHF MOBILE ) I would like to program this radio, can you help me ? Merry Christmas David - PU2PJT GG66TA - Santos/SP/Brasil Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
