Re: [RCSE] Epoxied servo techniques
I made a plastic plug that matched the Airtronics servos I used to use. Greased the plug and set it into a thick mess of epoxy and microbaloons. Wait for the epoxy to cure, yank the plug, pop in the servo using wood shavings to insure immobility. Worked great. If you do this, don't forget to allow room for the servo arm and a wire chase. RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format
[RCSE] Looking for a Profi 4000 manual.
Buy outright or copy and return. Your pleasure. TIA S RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format
[RCSE] Muller Comet CG?
I'm assembling a new 91T and looking for suggestions that'll get me real close to the design CG. Any of you guys able to dig back and remember? Otherwise it's 1/3 of the root chord...(prolly nose heavy) Thanks RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format
[RCSE] Crimping tool for servo plugs
Soldering and then crimping with needlenose pliers is getting a bit tiresome. Where can I find a tool that'll do this job? TIA S
[RCSE] Don Richmonds email addy?
Subject line tells all. Thanks
Re: [RCSE] Ultimate soaring car?
Subject: [RCSE] Ultimate soaring car? 2004 6.0 PSD Excursion. Carry 6 of anything! Get 20 mpg on hiways while doin' it. 44 gal. fuel tank. CT to Muncie No fuel stops... ;). Rough goin? switch on the 4WD... Not for everyone... :) I love mine! . Let's hear some suggestions! RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format
[RCSE] Where to buy stock EVO antenna?
Title asks it all. TIA
Re: [RCSE] Re: line and FAI events
- Original Message - From: "Rick" <[EMAIL PROTECTED]> To: Sent: Saturday, March 05, 2005 8:52 AM Subject: [RCSE] Re: line and FAI events Oh c'mon! For me, Mr. Subaverage, the homebuilt Ford L/S with 200m of 200lb mono. ONLY way to go! Launches as high or higher than "club"winches with braid. We don't need no steenkin' retriever! It's only a lousy 200m. If you're flying alone or with widly spaced winches, it can be a shorter walk than that. By the bye, Mr. Subaverage is an overweight 72 yr old... Again, build an el cheapo winch and load it with mono. Watch that moldie zoom! We have a readily available winch motor in the Ford long shaft used from the first model Fords till 1966. > > The sucker weighs a ton and the battery to support it is always the largest in the line because it can draw so much current. . Ouch. 300m to the turnaround. (FAI is merciful only 200m) So now we need a retriever. RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format
Re: [RCSE] Electric flight web sites
Start with www.ezonemag.com RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.
Re: [RCSE] Zoom zoom zoom....the sound of RCSD articles?
Geeze Kurt; now everyone knows that! ;) RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.
[RCSE] Looking for 9 ch + shift FM RX
Dealers? Private party? Until and if that synth TX gets here, I'd like a synth RX or one to listen on ch 38-39. Thanks for info RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.
Re: [RCSE] Spelling problems -enough-enough-enough!@#$
I did a bit of sloping over New Haven harbor. My ballast was held on to the outside of the fuse with packing tape... :) Worked for me. Steve > Here lets try this. I went out and flew my 2M Super V today and it was a > little windy. Does anyone out there have a trick way to add ballast short of > doing a major mod to the fuse? RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.
Re: [RCSE] Plane protection material
I like bubble wrap for protecting flying machines. But, I've been using packing tape to make the stuff into bags. What's out there that'll heat seal the edges and bags? Stephen
Re: [RCSE] Hinge tape
My workbench top is plate glass. Clean off a strip and face-down the tape. Strip as you desire. Leave the rest there for the next time.. Steven Bixby wrote: > > So, I'm going to cut it to width but would like suggestions on how to go > about it such that I don't muck up the adhesive in the process. -- Stephen Syrotiak Building Service Southern Connecticut RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.
Re: [RCSE] Blaine Rawdon in the news
Pictures, pictures, we gotta have pictures!! Thanks for the heads-up Mark. -- Stephen Syrotiak Building Service Southern Connecticut RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.
[RCSE] Ideas needed for 6 servo wing programming; MPX
Title says it all. I'm using a 3030 and It's not like programming yo' momma's Ace MP8K. I'm probably going to use user-defined mixes with a switch between two of 'em. The idea being to go from all wing surfaces moving, to just the outer ailerons whilst inner ail and flaps hold a slight camber. Any and all suggestions are welcomed. -- Stephen Syrotiak Building Service Southern Connecticut RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.
Re: [RCSE] Mixing Digiital Servos
FWIW I have 3 planes; an Addiction, a Compulsion and a Ariane V11 sporting analog and digital servos in their wings. No problemo. So far... Cheers -- Stephen Syrotiak Building Service Southern Connecticut RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
[RCSE] Looking for a few Molex connectors
5 mm pitch and about 15 mm plug length. Radio Shack doesn't stock 'em anymore. TIA -- Stephen Syrotiak Building Service Southern Connecticut RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
Re: [RCSE] Most fun plane?
I'll bite: FVK Bandit. -- Stephen Syrotiak Building Service Southern Connecticut RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
[RCSE] Re: Hall of Fame
Let's just include the deceased. This'll put their achievements, spread over a lifetime, in perspective, and let us all be more objective. In other words, if ya ain't dead you aint a HOFer. As it is now, except for me, (understandable) and a few others, the whole gang is in the (alleged) HOF... Respectfully submitted (to who?), yr. faithful svt. -- Stephen Syrotiak Building Service Southern Connecticut RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
Re: [RCSE] Ford Long Shaft Starter
It should be problemo zero, Dave. The chain parts distributors carry 'em. -- Stephen Syrotiak Building Service Southern Connecticut http://www.rcgroups.com/forums/index.php?referrerid=4399 RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
Re: [RCSE] Is there a better way to kick off CA?
spit on it. -- Stephen Syrotiak Building Service Southern Connecticut http://www.rcgroups.com/forums/index.php?referrerid=4399 RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
Re: [RCSE] Skegs
Dennis Phelan wrote: > Does anyone object to having a powered wheel inside the plane so it can be > "driven" to the spot after landing on time? If there's a reverse gear, I'll take two!! -- Stephen Syrotiak Building Service Southern Connecticut http://www.rcgroups.com/forums/index.php?referrerid=4399 RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
Re: [RCSE] Schemp-Hirth spoilers
Hobby Lobby used to carry such devices. -- Stephen Syrotiak Building Service Southern Connecticut RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
Re: [RCSE] River of lift.
Hi Gordon, Thanks for your believable theory. I've flown my Escape right off the beach in S. CT wondering all the time what the hell kept it up, at near spec height. The plane was probably right over the water's edge and flying like it was in wave. i.e. just hovering at windspeed. I couldn't believe it was a wave at the time. Surface WS were only 10-12 kt. This happened many times and I landed only because I got bored and needed an aerobatic fix. As I recall, we met at the soaring symposium last Mar. or April. How's that ugly airplane (mantis) of yours doing? :) cheers. -- Stephen Syrotiak Building Service Southern Connecticut RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
[RCSE] Spiral Stability and Polyhedral
If one were to adjust the polyhedral in a wing, so that each break angle was equal (less dihedral than normal for the tip panels), how badly do you think that would affect the spiral stability of the model? We're talking about a 2 meter lightweight R&E... Outer panels are about 10% longer than root panels. Thanks for all opinions. -- Stephen Syrotiak Building Service Southern Connecticut RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
[RCSE] 53.1 mhz Stuff for sale.
I'm getting rid of my Airtronics Module tx with latest ATRCS.. 8 model memory and ATRCs manual. It's just back (yesterday) from retune and a complete go over. Fresh 1500 mhz bat. pack. Ch 38 tx module. Rubber duck antenna. $275.00 I also have, and they may be spoken for, the following; 53.1 tx module and 3 rx. Rx are: (2) Airtronics Dual Conversion 8 ch (1) Sanwa DB Laser 7ch. $160.00 takes all the 6 meter gear. I won't break them up. Everything for $425.00. I ship. Reason for selling; new Mpx 3030, and MP8K on 6 meters 73 WB1GXO -- Stephen Syrotiak Building Service Southern Connecticut RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
[RCSE] WTB Router base..
.. for Dremel Mod. 370-6. The thing is ancient but works perfectly. I hate to spring for another Dremel just so I can fit the current router-type base to it. tnx -- Stephen Syrotiak Building Service Southern Connecticut RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
Re: [RCSE] HITEC gears?
Bill Conkling wrote: > Is there a way to get > only this little plastic gear? This question has plagued me for years! If you find out, let me know! -- Stephen Syrotiak Building Service ~ Not really expecting the sort of answer I'd like. Southern Connecticut RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
[RCSE] Auto pilot
I just noticed this this morning. Haven't seen any mention of it on this list. Sounds better'n sliced bread for xc, and those who venture their models 'way far away. Any one ever try one? How'd it work? https://www.fmadirect.com/html/2000_detail.htm?item=1476 Regards, -- Stephen Syrotiak Building Service Southern Connecticut RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
Re: [RCSE] Winch motor for sale
[EMAIL PROTECTED] wrote: Everyone should build F3b > winches so they are ready when F3j starts using winches. (We can all > dream) or stocking up on hot electric motors so they are ready when F3J switches to F5J. (I'm allus dreamin') -- Stephen Syrotiak Building Service Southern Connecticut RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
Re: [RCSE] steel stiffness, hardness and zoom launches.
Hi Bill, Nice post. Regarding line stretch: Have you ever launched with monofilament line on the drum? If not, I suggest you do so. Winch launching will never be the same. As a small bonus, you can use a shorter winch to turnaround distance. Regards, -- Stephen Syrotiak Building Service Southern Connecticut "Talking too much about theory will make you fall off a thermal" With permission from Mike Popescu RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
Re: [RCSE] Addiction airfoil ???
My MH32 Addiction doesn't do as well as my MH 32 Escape. Weight?? Mebbe. The response to droop camber is the same (vy little) but the Escape would scoot when reflexed. Go figure. Anyone got an extra set of Escape wings they'd like to part with? -- Stephen Syrotiak Building Service Southern Connecticut RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
Re: [RCSE] Nats..reply..Numbers
Why not run (it's probably been done, cuz I thought of it) a series of F3B clinics. East, Mid, and Western US. Something similar to the soaring thingie you (Jason, Mike, et al) folks ran in PA last spring. Show flyers that despite the work and logistics F3x can be fun and rewarding. Base B on a hot day ain't all bad... A day of tactics, demos, and explanations of strategies. Believe it or not this can be enjoyed with sort of sailplane. You don't need moldie$. Not 'til you get hooked on the sport... Regards from the master of the sub thirty second speed run. Steve -- Stephen Syrotiak Building Service Southern Connecticut RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
[RCSE] Are FMA servos sold under another name?
I need a gear set for (the last) one of mine. $4.95 + $8.00 shipping. And... I don't even get a kiss... TIA for any help Regards, -- Stephen Syrotiak Building Service Southern Connecticut http://members.home.net/stephen.s1 RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
Re: [RCSE] Coffee Airfoilers Fall Contest
My mindreader just burned out. Where is this Fall Contest being held? Regards, -- Stephen Syrotiak Building Service Southern Connecticut http://members.home.net/stephen.s1 RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
[RCSE] X-acto
I've been re-sharpening my blades for about a year now. It's quicker than changing 'em, and they sharpen keener than new. A 2x6 fine stone sits at the edge of my bench. Very convenient and no groping thru the rubble for it... Regards, -- Stephen Syrotiak (feeling sharp) Building Service Southern Connecticut http://members.home.net/stephen.s1 RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
[RCSE] Tired of all show no go transmitters?
Take a peek at http://www.jensenjetmodels.com/id30.htm. I've no interest whatsoever in the company. I do think they are providing a nice alternative to Atronx, JR, Hitec, etc.. Regards, -- Stephen Syrotiak Building Service; Loving his Ace transmitter... Southern Connecticut http://members.home.net/stephen.s1 RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
Re: [RCSE] Re: No guts?
Paul Klissner wrote: > Am I a hero, or what? Not until you use manhole covers instead of trashcan lids. -- Stephen Syrotiak Southern Connecticut http://members.home.net/stephen.s1 RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
Re: [RCSE] Argate?graphite Maunufacturer
http://www.airplane-model.com/ Regards, -- Stephen Syrotiak Southern Connecticut http://members.home.net/stephen.s1 RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
Re: [RCSE] Sources for Hinge tape, reflecting tape
Go to Home Depot or Lowes. You'll find hinging tape in huge (60') rolls for less than $4.00. It's the good tough stretchy stuff that the RC people sell for a buck a foot or so... Regards, -- Stephen Syrotiak Southern Connecticut http://members.home.net/stephen.s1 RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
[RCSE] Main Line
Where can I buy 200# test mono. My winch line is getting a bit tired. All those knots are tearing my (gloved) hand to ribbons... I haven't been down this street in years, will appreciate all answers. TIA Regards -- Stephen Syrotiak; launching high in Southern Connecticut http://members.home.net/stephen.s1 RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
[RCSE] Servo Gearsets
I'm looking for Airtronics 94501, 94401, and Futaba S133. 5 or 6 sets of each ought to do 'er. Anybody got em? Any dealer keep 'em in stock? Also, what's the group's take on FMA Premiere Servos? I like the prices, but how do they work? TIA Regards, -- Stephen Syrotiak; looking at a strange bright light in the morning sky. Why, why it's the sun! Southern Connecticut http://members.home.net/stephen.s1 RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
[RCSE] So.CT sloping
Such as it is. Click on Sloping at New Haven Harbor. More to come as wx permits. -- Stephen Syrotiak; Anticipating a two day snowfall. Southern Connecticut http://members.home.net/stephen.s1 RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
Re: [RCSE] Servo damage?
Keep landing like that. You've got servo savers. ;) Regards -- Stephen Syrotiak Southern Connecticut RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
Re: [RCSE] Plug-in tip sections
It seems to me that if there's no spar in the center section, and you're poo-pooing the root/sub rib method you might want to try continuing the CF sheeting out and making a sleeve for the outer section. Tricky molding but I'm sure it can be done. GL & Regards -- Stephen Syrotiak Southern Connecticut RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
Re: [RCSE] Tension on Hi-Start
Pull it back until it scares you. Launch. Repeat.* *you'll find out when to ease off... Best regards, -- Stephen Syrotiak Southern Connecticut RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
Re: [RCSE] Silicone hinges
Stefan Smets wrote: > > Anybody ever tried this ? I've done this many times on a wide variety of gliders. It works very well, provides a gapless, smooth surface which is practically indestructible. However, I have found that the mating faces of flying surfaces be sealed and as smooth as possible. The silicone likes sticking to (smooth) surfaces. This is unlike applying paint where a little "tooth" is needed. GL. Regards, -- Stephen Syrotiak Southern Connecticut http://pages.cthome.net/stephen RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]