[SlimDevices: SqueezeCenter] LMS 7.9.2 does not start on Readynas ultra pro 4
Hi, I have just installed LMs 7.9.2 (logitechmediaserver-7.9.2-1547382380-i386-readynas.bin) on Readynas ultra 4 with Radiator 4.2.31. Previously LMS 7.9.1 worked fine. However, it does not want to start. Readynas frontview says it did, but it is not running (the Setting page does not open, ipeng does not see the server ...). I basically removed the 7.9.1 and performed the update. It is visible as an add on. anything obvious I am missing? Many Thanks, Ludi Ludi's Profile: http://forums.slimdevices.com/member.php?userid=68696 View this thread: http://forums.slimdevices.com/showthread.php?t=110039 ___ Squeezecenter mailing list Squeezecenter@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/squeezecenter
Re: [SlimDevices: SqueezeCenter] LMS 7.9.2 does not start on Readynas ultra pro 4
Hi everyone. I did try upgrading LMS server from 7.6.3 to 7.9.3 on my prehistoric Netgear ReadyNas Ultra 2 and it didn't work. LMS didn't start. 7.9.4 beta and 8.0.0 didn't start after the installation either. I rolled back to 7.7 and it worked fine for me. Any thoughts? Is the older Netgear stuff no longer supported? f1ash's Profile: http://forums.slimdevices.com/member.php?userid=60207 View this thread: http://forums.slimdevices.com/showthread.php?t=110039 ___ Squeezecenter mailing list Squeezecenter@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/squeezecenter
Re: [SlimDevices: SqueezeCenter] LMS 7.9.2 does not start on Readynas ultra pro 4
I did try upgrading LMS server from 7.6.3 to 7.9.3 on my prehistoric Netgear ReadyNas Ultra 2 and it didn't work. LMS didn't start. 7.9.4 beta and 8.0.0 didn't start after the installation either. I rolled back to 7.7 and it worked fine for me. Any thoughts? Is the older Netgear stuff no longer supported? Hmm... I wouldn't know what is breaking it. Just recently had feedback by a user of a Sparc(!) based ReadyNAS who was running LMS8. That's even older than yours. Is there anything in the server.log? TBH. I'm rather going to remove the ReadyNAS builds than fix them. It just doesn't make sense to support devices from a decade ago, but nothing more recent... Raspberry Pi is the way to go, if you want to continue to use your NAS as just a NAS, and leave the LMS duty to something more up-to-date and working. -- Michael ___ Squeezecenter mailing list Squeezecenter@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/squeezecenter
Re: [SlimDevices: SqueezeCenter] LMS 7.9.2 does not start on Readynas ultra pro 4
Hi Michael. Thanks for your reply. I see your point. But tbh I don't really understand why should I change the hardware (ie Netgear NAS) that is fully working and fits all my needs pretty well. It does look like consumerism. ) If there's no way to upgrade to 7.9 or higher that's ok for me. I'll stick to 7.7. Anyway thanks for your input! f1ash's Profile: http://forums.slimdevices.com/member.php?userid=60207 View this thread: http://forums.slimdevices.com/showthread.php?t=110039 ___ Squeezecenter mailing list Squeezecenter@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/squeezecenter
Re: [SlimDevices: SqueezeCenter] LMS 7.9.2 does not start on Readynas ultra pro 4
f1ash wrote: > Hi Michael. > > Thanks for your reply. > I see your point. But tbh I don't really understand why should I change > the hardware (ie Netgear NAS) that is fully working and fits all my > needs pretty well. > It does look more like consumerism. ) If there's no way to upgrade to > 7.9 or higher that's ok for me. I'll stick to 7.7. Anyway thanks for > your input!No need to stop using the NAS just add a Pi as LMS server. Sent from my Pixel 3a using Tapatalk slartibartfast's Profile: http://forums.slimdevices.com/member.php?userid=35609 View this thread: http://forums.slimdevices.com/showthread.php?t=110039 ___ Squeezecenter mailing list Squeezecenter@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/squeezecenter
Re: [SlimDevices: SqueezeCenter] LMS 7.9.2 does not start on Readynas ultra pro 4
Hi again. Just tried to reinstall the LMS 8.0.0 and it seemed like it was working until I rebooted the NAS. So I uninstalled LMS 7.7, installed 8.0.0 and successfully connected to LMS web interface but all the images were broken. Then I rebooted the Netgear NAS and got no connection to web interface anymore. system.log: Code: Oct 25 19:56:45 Netgear RAIDiator: The Logitech Media Server add-on has been successfully installed. Oct 25 19:56:46 Netgear kernel: squeezeboxserve[16990]: segfault at ff ip 00ff sp ffa37e3c error 14 in perl[8048000+10] Oct 25 19:57:00 Netgear kernel: squeezeboxserve[17191]: segfault at ff ip 00ff sp fffce92c error 14 in perl[8048000+10] Oct 25 19:57:15 Netgear kernel: squeezeboxserve[17194]: segfault at ff ip 00ff sp fff344bc error 14 in perl[8048000+10] Oct 25 19:57:30 Netgear kernel: squeezeboxserve[17197]: segfault at ff ip 00ff sp ffc2421c error 14 in perl[8048000+10] Oct 25 19:57:45 Netgear kernel: squeezeboxserve[17295]: segfault at ff ip 00ff sp fff42a6c error 14 in perl[8048000+10] Oct 25 19:58:00 Netgear kernel: squeezeboxserve[17298]: segfault at ff ip 00ff sp fff43f5c error 14 in perl[8048000+10] Oct 25 19:58:15 Netgear kernel: squeezeboxserve[17301]: segfault at ff ip 00ff sp ffd2de7c error 14 in perl[8048000+10] Oct 25 19:58:30 Netgear kernel: squeezeboxserve[17488]: segfault at ff ip 00ff sp ffc800ec error 14 in perl[8048000+10] Oct 25 19:58:45 Netgear kernel: squeezeboxserve[17582]: segfault at ff ip 00ff sp ff81d95c error 14 in perl[8048000+10] Oct 25 19:58:49 Netgear RAIDiator: Please close this browser session and use RAIDar to reconnect to the device. System rebooting... Oct 25 19:58:49 Netgear RAIDiator: Rebooting device... Oct 25 19:58:54 Netgear shutdown[17735]: shutting down for system reboot slimserver.log Code: 2020-10-25 19:56:44 squeezeboxserver_safe started. 2020-10-25 19:56:59 Logitech Media Server died. Restarting. 2020-10-25 19:57:14 Logitech Media Server died. Restarting. 2020-10-25 19:57:29 Logitech Media Server died. Restarting. 2020-10-25 19:57:44 Logitech Media Server died. Restarting. 2020-10-25 19:57:59 Logitech Media Server died. Restarting. 2020-10-25 19:58:14 Logitech Media Server died. Restarting. 2020-10-25 19:58:29 Logitech Media Server died. Restarting. 2020-10-25 19:58:44 Logitech Media Server died. Restarting. 2020-10-25 19:58:59 squeezeboxserver_safe stopped. 2020-10-25 19:59:59 squeezeboxserver_safe started. 2020-10-25 20:00:14 Logitech Media Server died. Restarting. 2020-10-25 20:00:29 Logitech Media Server died. Restarting. 2020-10-25 20:00:44 Logitech Media Server died. Restarting. 2020-10-25 20:00:59 Logitech Media Server died. Restarting. 2020-10-25 20:01:14 Logitech Media Server died. Restarting. 2020-10-25 20:01:29 Logitech Media Server died. Restarting. 2020-10-25 20:01:44 Logitech Media Server died. Restarting. 2020-10-25 20:01:59 Logitech Media Server died. Restarting. f1ash's Profile: http://forums.slimdevices.com/member.php?userid=60207 View this thread: http://forums.slimdevices.com/showthread.php?t=110039 ___ Squeezecenter mailing list Squeezecenter@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/squeezecenter
Re: [SlimDevices: SqueezeCenter] LMS 7.9.2 does not start on Readynas ultra pro 4
Just tried to reinstall the LMS 8.0.0 and it seemed like it was working until I rebooted the NAS. So I uninstalled LMS 7.7, installed 8.0.0 and successfully connected to LMS web interface but all the images were broken. Ok, here's what I've found. The change which I could imagine could potentially cause this crash is an update to the Audio::Scan library from 6 years ago... You could try to use the version from 7.7. But that would involve quite some tinkering... Would you be able and willing to replace a bunch of files as the root user on your NAS? (and you'd have to do this after every update!) I do understand that you don't want to throw away an otherwise perfectly working device. But that's not the point of using a Raspberry Pi to run LMS. It's actually the exact setup I have in my office: I gave up running LMS on my ReadyNAS Duo v2. But that same old NAS is still serving the music files, handling TimeMachine etc. Running LMS on the Pi has the advantage that you'll be running it on a device which is actively supported (because I use it ;-)), and might actually improve performance overall as a side effect, allowing you to take advantage of plugins and features which might not have run on the NAS with its limited resources. -- Michael ___ Squeezecenter mailing list Squeezecenter@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/squeezecenter
Re: [SlimDevices: SqueezeCenter] LMS 7.9.2 does not start on Readynas ultra pro 4
Hi Michael. > Would you be able and willing to > replace a bunch of files as the root user on your NAS? (and you'd have > to do this after every update!) I do have a will but I am not sure if I have the knowledge. I'll try to dig into it on the netgear forums. On the other hand I tried to install several other versions: 7.9.0, 7.9.1 and 7.9.2. 7.9.2 did not work for me just like 7.9.3, 7.9.4 and 8.0.0 7.9.0 and 7.9.1 are working fine. The only issue that I've noticed was a bug with the plugins. I can't see the list of 3d party plugins and it looks like LMS couldn't connect to repository. 31955 I have disabled my network filter but it didn't help. Still no connection to repository. > Running LMS on the Pi > has the advantage that you'll be running it on a device which is > actively supported Thanks for the advice, Mike. I think I'll give it a go. I am sorry for a bit of off topic here, but probably you could help me with this, Michael. After installing 7.7.7 I found a new feature - the screensaver (Digital VU or Analog VU) works on both screens now on Transporter. Wow! But there's a small "Now playing" text that is really annoying. Please see picture: 31956 Do you have any idea how to remove this text? Please advise. Thank you! +---+ |Filename: IMG_20201025_102448.jpg | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=31956| +---+ f1ash's Profile: http://forums.slimdevices.com/member.php?userid=60207 View this thread: http://forums.slimdevices.com/showthread.php?t=110039 ___ Squeezecenter mailing list Squeezecenter@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/squeezecenter
Re: [SlimDevices: SqueezeCenter] LMS 7.9.2 does not start on Readynas ultra pro 4
I do have a will but I am not sure if I have the knowledge. I'll try to dig into it on the netgear forums. You just gave the perfect reason why to move away from this unit to run LMS: On the other hand I tried to install several other versions: 7.9.0, 7.9.1 and 7.9.2. 7.9.2 did not work for me just like 7.9.3, 7.9.4 and 8.0.0 7.9.0 and 7.9.1 are working fine. The only issue that I've noticed was a bug with the plugins. I can't see the list of 3d party plugins and it looks like LMS couldn't connect to repository. The box lacks IO::Socket::SSL, and it's nothing you can easily update on that system. SSL is getting ever more important. I'd really strongly suggest you go the Pi route. Save yourself the hassle of trying to update the NAS. I am sorry for a bit of off topic here, but probably you could help me with this, Michael. After installing 7.7.7 I found a new feature - the screensaver (Digital VU or Analog VU) works on both screens now on Transporter. Wow! But there's a small "Now playing" text that is really annoying. Please see picture: Ahm... no idea... I think I've never used that screensaver. But from a quick glance at the code this is hard-coded. -- Michael ___ Squeezecenter mailing list Squeezecenter@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/squeezecenter
Re: [SlimDevices: SqueezeCenter] LMS 7.9.2 does not start on Readynas ultra pro 4
> Save yourself the hassle of trying to > update the NAS. It's too late, Mike.. ))) I've installed SSH addon to Netgear and now Upgrading a legacy ReadyNAS from RAIDiator 4.2.x to 6.2.x. Hopefully this will fix "IO::Socket::SSL" problem. If not - here's the solution: Code: I ssh'd to my box and tried: $ apt-get update $ apt-get install libio-socket-ssl-perl But apt-get could not connect to the proper repositories to grab the required files. I checked /etc/apt/sources.list and found this: $ cat /etc/apt/sources.list http://www.readynas.com/packages 4.2.31/ #deb http://archive.debian.org/debian etch After removing the leading '#' in the 2nd line (comment) I retried the above two commands, this time IO::Socket::SSL installed OK. Spotty is now running on my NAS :-) Thanks for your help and all you're doing to keep LMS alive! f1ash's Profile: http://forums.slimdevices.com/member.php?userid=60207 View this thread: http://forums.slimdevices.com/showthread.php?t=110039 ___ Squeezecenter mailing list Squeezecenter@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/squeezecenter
Re: [SlimDevices: SqueezeCenter] LMS 7.9.2 does not start on Readynas ultra pro 4
Ludi wrote: > Hi, > I have just installed LMs 7.9.2 > (logitechmediaserver-7.9.2-1547382380-i386-readynas.bin) on Readynas > ultra 4 with Radiator 4.2.31. Previously LMS 7.9.1 worked fine. > > However, it does not want to start. Readynas frontview says it did, but > it is not running (the Setting page does not open, ipeng does not see > the server ...). I basically removed the 7.9.1 and performed the > update. It is visible as an add on. > anything obvious I am missing? > > Many Thanks, > Ludi Not sure about you but I always have to run this file "lms_1.0.9_all.deb" after installing a LMS update to enable LMS to run on my ancient Readynas. Jim All wireless (TM-AC1900) except NAS (ReadyNAS PRO - OS 6.9.1 - 3GB RAM - 3 X 4TB drives - XRAID2 - LMS 7.9.1 ) Squeezebox Boom - Anywhere with an AC outlet Squeezebox Touch > Bose Radio - Kitchen Squeezebox Touch > Hafler 100 preamp > Hafler DH-220 amp > Sima SSW-L6 EX Speaker selector= Polk Audio Monitor 70 Series II - Living Room, Definitive Tech ProMonitor 100 - Dining Room, Infinity US-1 - Porch Ipeng on an iPad controls everything! usbethjim's Profile: http://forums.slimdevices.com/member.php?userid=8024 View this thread: http://forums.slimdevices.com/showthread.php?t=110039 ___ Squeezecenter mailing list Squeezecenter@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/squeezecenter
Re: [SlimDevices: SqueezeCenter] LMS 7.9.2 does not start on Readynas ultra pro 4
UOTE=usbethjim;931540]Not sure about you but I always have to run this file "lms_1.0.9_all.deb" after installing a LMS update to enable LMS to run on my ancient Readynas. Jim Thanks, I will try. However 7.9.1 has been running without it. Ludi Ludi's Profile: http://forums.slimdevices.com/member.php?userid=68696 View this thread: http://forums.slimdevices.com/showthread.php?t=110039 ___ Squeezecenter mailing list Squeezecenter@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/squeezecenter
Re: [SlimDevices: SqueezeCenter] LMS 7.9.2 does not start on Readynas ultra pro 4
I have tried it but I get message that the update is not valid for this architecture. Anyone can help? Ludi's Profile: http://forums.slimdevices.com/member.php?userid=68696 View this thread: http://forums.slimdevices.com/showthread.php?t=110039 ___ Squeezecenter mailing list Squeezecenter@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/squeezecenter
Re: [SlimDevices: SqueezeCenter] LMS 7.9.2 does not start on Readynas ultra pro 4
updating with console results: /usr/sbin# squeezeboxserver dirsFor: Didn't find a match request: [scprefs] Segmentation fault Ludi's Profile: http://forums.slimdevices.com/member.php?userid=68696 View this thread: http://forums.slimdevices.com/showthread.php?t=110039 ___ Squeezecenter mailing list Squeezecenter@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/squeezecenter
Re: [SlimDevices: SqueezeCenter] LMS 7.9.2 does not start on Readynas ultra pro 4
Have you been inquiring over at the Netgear forums? Folks over there might be able to help... I don't think many active members over here use the ReadyNAS anymore. Jim All wireless (TM-AC1900) except NAS (ReadyNAS PRO - OS 6.9.1 - 3GB RAM - 3 X 4TB drives - XRAID2 - LMS 7.9.1 ) Squeezebox Boom - Anywhere with an AC outlet Squeezebox Touch > Bose Radio - Kitchen Squeezebox Touch > Hafler 100 preamp > Hafler DH-220 amp > Sima SSW-L6 EX Speaker selector= Polk Audio Monitor 70 Series II - Living Room, Definitive Tech ProMonitor 100 - Dining Room, Infinity US-1 - Porch Ipeng on an iPad controls everything! usbethjim's Profile: http://forums.slimdevices.com/member.php?userid=8024 View this thread: http://forums.slimdevices.com/showthread.php?t=110039 ___ Squeezecenter mailing list Squeezecenter@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/squeezecenter
Re: [SlimDevices: SqueezeCenter] LMS 7.9.2 does not start on Readynas ultra pro 4
Did you check your server.log file (/c/.squeezeboxserver/log/server.log)? If that's empty, you could edit /etc/default/squeezeboxserver, add "--d_startup" to the "SLIMOPTIONS" and try again. This might give you more information about what is going on if it fails at startup. -- Michael ___ Squeezecenter mailing list Squeezecenter@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/squeezecenter
Re: [SlimDevices: SqueezeCenter] LMS 7.9.2 does not start on Readynas ultra pro 4
mherger wrote: > Did you check your server.log file > (/c/.squeezeboxserver/log/server.log)? If that's empty, you could edit > /etc/default/squeezeboxserver, add "--d_startup" to the "SLIMOPTIONS" > and try again. This might give you more information about what is going > > on if it fails at startup. > > -- > > Michael Thanks Michael. the option did not work in the "SLIMOPTIONS" but it did work appended to the command. Is there anything here that screams at you? Code: NAS-C0-B0-C8:/etc/default# /usr/sbin/squeezeboxserver --d_startup Got @INC containing: /c/.squeezeboxserver /usr/share/squeezeboxserver/CPAN /usr/share/squeezeboxserver /usr/sbin /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl . Extended @INC to contain: /usr/share/squeezeboxserver/CPAN/arch/5.8/i386-linux-thread-multi /usr/share/squeezeboxserver/CPAN/arch/5.8/i386-linux-thread-multi/auto /usr/share/squeezeboxserver/CPAN/arch/5.8.8/i486-linux-gnu-thread-multi /usr/share/squeezeboxserver/CPAN/arch/5.8.8/i486-linux-gnu-thread-multi/auto /usr/share/squeezeboxserver/CPAN/arch/5.8/i486-linux-gnu-thread-multi /usr/share/squeezeboxserver/CPAN/arch/5.8/i486-linux-gnu-thread-multi/auto /usr/share/squeezeboxserver/CPAN/arch/i486-linux-gnu-thread-multi /usr/share/squeezeboxserver/CPAN/arch/5.8 /usr/share/squeezeboxserver/lib /usr/share/squeezeboxserver/CPAN /usr/share/squeezeboxserver /c/.squeezeboxserver /usr/share/squeezeboxserver/CPAN /usr/share/squeezeboxserver /usr/sbin /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl . Loaded module: [version] ok! Loaded module: [Time::HiRes] ok! Loaded module: [DBI] ok! Loaded module: [EV] ok! Loaded module: [XML::Parser::Expat] ok! Loaded module: [HTML::Parser] ok! Loaded module: [JSON::XS] ok! Loaded module: [Digest::SHA1] ok! Loaded module: [YAML::XS] ok! Loaded module: [Sub::Name] ok! The following modules are loaded after the first attempt: attributes.pm => /usr/share/squeezeboxserver/CPAN/attributes.pm re.pm => /usr/lib/perl/5.8/re.pm Slim/Utils/OS/Debian.pm => /usr/share/perl5/Slim/Utils/OS/Debian.pm HTML/Parser.pm => /usr/share/squeezeboxserver/CPAN/HTML/Parser.pm File/Spec/Functions.pm => /usr/share/perl/5.8/File/Spec/Functions.pm List/Util.pm => /usr/lib/perl/5.8/List/Util.pm POSIX.pm => /usr/lib/perl/5.8/POSIX.pm /usr/lib/perl/5.8/auto/POSIX/load_imports.al => /usr/lib/perl/5.8/auto/POSIX/load_imports.al Getopt/Long.pm => /usr/share/perl/5.8/Getopt/Long.pm Cwd.pm => /usr/lib/perl/5.8/Cwd.pm warnings.pm => /usr/share/perl/5.8/warnings.pm YAML/XS.pm => /usr/share/squeezeboxserver/CPAN/YAML/XS.pm Slim/Utils/OSDetect.pm => /usr/share/perl5/Slim/Utils/OSDetect.pm B.pm => /usr/lib/perl/5.8/B.pm Digest/base.pm => /usr/share/squeezeboxserver/CPAN/Digest/base.pm Slim/Utils/OS/Linux.pm => /usr/share/perl5/Slim/Utils/OS/Linux.pm Symbol.pm => /usr/share/perl/5.8/Symbol.pm Sub/Name.pm => /usr/share/squeezeboxserver/CPAN/Sub/Name.pm Scalar/Util.pm => /usr/lib/perl/5.8/Scalar/Util.pm UNIVERSAL.pm => /usr/share/perl/5.8/UNIVERSAL.pm Exporter.pm => /usr/share/perl/5.8/Exporter.pm Slim/Utils/OS.pm => /usr/share/perl5/Slim/Utils/OS.pm version/vpp.pm => /usr/share/squeezeboxserver/CPAN/arch/5.8/version/vpp.pm File/Spec.pm => /usr/share/perl/5.8/File/Spec.pm JSON/XS.pm => /usr/share/squeezeboxserver/CPAN/JSON/XS.pm File/Path.pm => /usr/share/perl/5.8/File/Path.pm /usr/lib/perl/5.8/auto/POSIX/autosplit.ix => /usr/lib/perl/5.8/auto/POSIX/autosplit.ix FindBin.pm => /usr/share/perl/5.8/FindBin.pm locale.pm => /usr/share/perl/5.8/locale.pm warnings/register.pm => /usr/share/perl/5.8/warnings/register.pm XSLoader.pm => /usr/lib/perl/5.8/XSLoader.pm Slim/bootstrap.pm => /usr/share/perl5/Slim/bootstrap.pm Digest/SHA1.pm => /usr/share/squeezeboxserver/CPAN/Digest/SHA1.pm Time/HiRes.pm => /usr/lib/perl/5.8/Time/HiRes.pm Slim/Utils/OS/ReadyNAS.pm => /usr/share/perl5/Slim/Utils/OS/ReadyNAS.pm XML/Parser/Expat.pm => /usr/share/squeezeboxserver/CPAN/XML/Parser/Expat.pm version.pm => /usr/share/squeezeboxserver/CPAN/arch/5.8/version.pm B/Deparse.pm => /usr/lib/perl/5.8/B/Deparse.pm DBI.pm => /usr/share/squeezeboxserver/CPAN/DBI.pm base.pm => /usr/share/perl/5.8/base.pm Config.pm => /usr/lib/perl/5.8/Config.pm File/Basename.pm => /usr/share/perl/5.8/File/Basename.pm EV.pm => /usr/share/squeezeboxserver/CPAN/EV.pm Carp.pm => /usr/share/perl/5.8/Carp.pm YAML/XS/LibYAML.pm => /usr/share/squeezeboxserver/CPAN/YAML/XS/LibYAML.pm common/sense.pm => /usr/share/squeezeboxserver/CPAN/common/sense.pm File/Spec/Unix.pm => /usr/share/perl/5.8/File/Spec/Unix.pm Exporter/Heavy.pm => /usr/share/p
Re: [SlimDevices: SqueezeCenter] LMS 7.9.2 does not start on Readynas ultra pro 4
Is there anything here that screams at you? No. "Unfortunately" that startup seems to be working perfectly fine. dirsFor: Didn't find a match request: [scprefs] Segmentation fault Aren't there any timestamps in your log file? Would be interesting to unerstand whether that segfault happens right after (or during) startup, or whether it's delayed by a bit. Please add "--debug server.plugins,server" to the startup options and see whether that gives you anything. Please upload the full server.log file to https://www.dropbox.com/request/T3RctyzGgNg0oFDubq6a -- Michael ___ Squeezecenter mailing list Squeezecenter@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/squeezecenter
Re: [SlimDevices: SqueezeCenter] LMS 7.9.2 does not start on Readynas ultra pro 4
You could try updating the Ultra 4 to the latest version of Radiator - 6.9.4 - although you will need to backup all your data before doing so. Details of how to do it are on the Netgear forum; an upgrade not officially supported but condoned. The file lms_1.0.9_all.deb is used to put the ReadyNAS icon into the UI. Again details on the ReadyNAS forum. Worth doing as it gives your ReadyNAS a new lease of life as it will be running on the latest version of Radiator and you will get all updates. I did it a few weeks ago and it is bullet proof and runs 7.9.2 perfectly: [image: https://i.imgur.com/2u8Jpxu.jpg] Heuer's Profile: http://forums.slimdevices.com/member.php?userid=2543 View this thread: http://forums.slimdevices.com/showthread.php?t=110039 ___ Squeezecenter mailing list Squeezecenter@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/squeezecenter
Re: [SlimDevices: SqueezeCenter] LMS 7.9.2 does not start on Readynas ultra pro 4
Heuer wrote: > You could try updating the Ultra 4 to the latest version of Radiator - > 6.9.4 - although you will need to backup all your data before doing so. > Details of how to do it are on the Netgear forum; an upgrade not > officially supported but condoned. The file lms_1.0.9_all.deb is used to > put the ReadyNAS icon into the UI. Again details on the ReadyNAS forum. > Worth doing as it gives your ReadyNAS a new lease of life as it will be > running on the latest version of Radiator and you will get all updates. > I did it a few weeks ago and it is bullet proof and runs 7.9.2 > perfectly: > > > [image: https://i.imgur.com/2u8Jpxu.jpg] I have the exact same isues trying to put lms 7.9.2 on my Readynas Ultra 2. Are the backup for security or is a restore mandatory after upgrade of Radiator ? Do you have a link to the thread on Readynas forum ? Callesoroe Living room: Transporter, Tact RCS 2.2X digital preamp, Martin Logan Vista speakers, AMPS(Icepower): Acoustic Reality Ear Enigma PLUS(PANELS), Acoustic Reality Ear TWO MKII(Bas) Kitchen: Receiver - S.M.S.L DAC, Prodipe Pro 5 active bi-amp speakers. Bedroom: Receiver+UE boombox, Kids: Receiver+Active speakers, Office: Transporter, JBL LSR305 active speakers , TIDAL HIFI flac streaming. http://www.last.fm/user/callesoroe callesoroe's Profile: http://forums.slimdevices.com/member.php?userid=22693 View this thread: http://forums.slimdevices.com/showthread.php?t=110039 ___ Squeezecenter mailing list Squeezecenter@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/squeezecenter