[pfSense Support] ISO ?
Everyone,On the newest version of the ISO (0.79.2) it produces the same error as I've been getting on previous ISOs ... (Waiting for Backend). But in doing as the pfSense website indicates "Run 'installer' from the menu" I get a new setup/install.My ? is: are we to run installer from the menu or are we to go into the shell and run the {/FreeSBIE/scripts/installer.sh} script? I'm a little confused, but it looks like the "installer" from the menu is for installing F-BSD/DF-BSD, and the {FreeSBIE/scripts/installer.sh} script is for installing pfSense is this right?Just looking for some clarification on the PROPER procedure for installing pfSense to the HDD.Thanks all !!!--David L. StroutEngineering Systems Plus, LLC
[pfSense Support] ISO Images ... ??
Everyone, Can anyone tell me what's going on with the ISO images. I have tried several of the newest releases (0.73.x, 0.72.x & 0.71.x) w/ all the same results the system boots fine as a bootable ISO, but when you run the install script [/FreeSBIE/scripts/install.sh] it fails everytime at the same point "Loading Backend" I have reverted to the 0.63.x branch to do new installs then upgrade to the lated 0.73.x, but I am really interested in doing a fresh install. Thoughts -- David L. Strout Engineering Systems Plus, LLC - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] ISO ?
At 09:25 AM 8/23/2005, David Strout wrote:
Everyone,
On the newest version of the ISO (0.79.2) it produces the same error
as I've been getting on previous ISOs ... (Waiting for
Backend). But in doing as the pfSense website indicates "Run
'installer' from the menu" I get a new setup/install.
My ? is: are we to run installer from the menu or are we to go into
the shell and run the {/FreeSBIE/scripts/installer.sh} script? I'm
a little confused, but it looks like the "installer" from the menu
is for installing F-BSD/DF-BSD, and the
{FreeSBIE/scripts/installer.sh} script is for installing pfSense
is this right?
Just looking for some clarification on the PROPER procedure for
installing pfSense to the HDD.
I ran 'installer' from the console menu and it did a pfsense install
to the HD...
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
AW: [pfSense Support] ISO ?
I
would suggest doing it the following way:
1.
Boot the LiveCD
2.
Assign Interfaces at bootup (you'll be asked)
3.
Config your settings for basic connectivity from the WebGui and make your WAN
work (the settings will be used for the installation and you'll be able to run
the online-update at the end of the installationprocess)
4.
Enter "installer" from the shellmenu (at the menuitemprompt, not going to shell)
including the online-update if you wish to do so
Holger
-Ursprüngliche Nachricht-Von: David Strout
[mailto:[EMAIL PROTECTED]Gesendet: Dienstag, 23. August 2005
15:25An: support@pfsense.comBetreff: [pfSense Support]
ISO ?Everyone,On the newest version of the ISO
(0.79.2) it produces the same error as I've been getting on previous ISOs ...
(Waiting for Backend). But in doing as the pfSense website indicates
"Run 'installer' from the menu" I get a new setup/install.My ? is: are
we to run installer from the menu or are we to go into the shell and run the
{/FreeSBIE/scripts/installer.sh} script? I'm a little confused, but it
looks like the "installer" from the menu is for installi ng F-BSD/DF-BSD, and
the {FreeSBIE/scripts/installer.sh} script is for installing pfSense . is
this right?Just looking for some clarification on the PROPER procedure
for installing pfSense to the HDD.Thanks all !!!--David L.
StroutEngineering Systems Plus, LLC
Virus checked by G DATA AntiVirusKit
Re: [pfSense Support] ISO ?
Thanks for the input but one more ?When I kick off the installer from the console menu in the way you specify ... it looks like it is installing FreeBSD/DragonflyBSD and not pfSense, and also another point is that there is no provisioning for making a swap partition/slice as there had been in previous installs.Was the installer re-wrote? Do I have to setup a swap slice or is it done automatically now?Thanks !--David L. StroutEngineering Systems Plus, LLC- Original Message -Subject: AW: [pfSense Support] ISO ?From: [EMAIL PROTECTED]To: [EMAIL PROTECTED];support@pfsense.comD!
ate:
08-23-2005 9:32 am
I
would suggest doing it the following way:
1.
Boot the LiveCD
2.
Assign Interfaces at bootup (you'll be asked)
3.
Config your settings for basic connectivity from the WebGui and make your WAN
work (the settings will be used for the installation and you'll be able to run
the online-update at the end of the installationprocess)
4.
Enter "installer" from the shellmenu (at the menuitemprompt, not going to shell)
including the online-update if you wish to do so
Holger
-Ursprüngliche Nachricht-Von: David Strout
[mailto:[EMAIL PROTECTED]Gesendet: Dienstag, 23. August 2005
15:25An: support@pfsense.comBetreff: [pfSense Support]
ISO ?Everyone,On the newest version of the ISO
(0.79.2) it produces the same error as I've been getting on previous ISOs ...
(Waiting for Backend). But in doing as the pfSense website indicates
"Run 'installer' from the menu" I get a new setup/install.My ? is: are
we to run installer from the menu or are we to go into the shell and run the
{/FreeSBIE/scripts/installer.sh} script? I'm a little confused, but it
looks like the "installer" from the menu is for installi ng F-BSD/DF-BSD, and
the {FreeSBIE/scripts/installer.sh} script is for installing pfSense . is
this right?Just looking for some clarification on the PROPER procedure
for installing pfSense to the HDD.Thanks all !!!--David L.
StroutEngineering Systems Plus, LLC
Virus checked by G DATA AntiVirusKit
AW: [pfSense Support] ISO ?
The
installer changed to lua, so yes, it is a completely new system. Some messages
need some cosmetic fixing but it installs pfSense. For the first question on
partitioning just enter a "*" and it will assign the complete space of the media
to be used. Then hit several times ok, go on, ... until you come to the
subpartitioning. By default it suggests a "/" partition with "*" and a "swap"
with some size. unless your media is actually smaller than the swap (which
might happen if you are running from a CF) you can keep this settings. If
running from CF or another small media you can remove the swap-partition
completely and just run "/" with "*". Go ahead. Firmwareupdate is
optional.
Holger
-Ursprüngliche Nachricht-Von: David Strout
[mailto:[EMAIL PROTECTED]Gesendet: Dienstag, 23. August 2005
16:01An: Holger Bauer; support@pfsense.comBetreff: Re:
[pfSense Support] ISO ?Thanks for the input but one
more ?When I kick off the installer from the console menu in the way
you specify ... it looks like it is installing FreeBSD/DragonflyBSD and not
pfSense, and also another point is that there is no provisioning for making a
swap partition/slice as there had been in previous installs.Was the
installer re-wrote? Do I have to setup a swap slice or is it done
automatically now?Thanks !--David L. StroutEngineering
Sys tems Plus, LLC
----- Original Message -Subject: AW:
[pfSense Support] ISO ?From: [EMAIL PROTECTED]To:
[EMAIL PROTECTED];support@pfsense.comD! ate: 08-23-2005
9:32 am
I
would suggest doing it the following way:
1.
Boot the LiveCD
2.
Assign Interfaces at bootup (you'll be asked)
3.
Config your settings for basic connectivity from the WebGui and make your
WAN work (the settings will be used for the installation and you'll be able
to run the online-update at the end of the
installationprocess)
4.
Enter "installer" from the shellmenu (at the menuitemprompt, not going to
shell) including the online-update if you wish to do so
Holger
-Ursprüngliche Nachricht-Von: David Strout
[mailto:[EMAIL PROTECTED]Gesendet: Dienstag, 23. August
2005 15:25An: support@pfsense.comBetreff: [pfSense
Support] ISO ?Everyone,On the newest version
of the ISO (0.79.2) it produces the same error as I've been getting on
previous ISOs ... (Waiting for Backend). But in doing as the pfSense
website indicates "Run 'installer' from the menu" I get a new
setup/install.My ? is: are we to run installer from the menu or
are we to go into the shell and run the {/FreeSBIE/scripts/installer.sh}
script? I'm a little confused, but it looks like the "installer" from the
menu is for installi ng F-BSD/DF-BSD, and the
{FreeSBIE/scripts/installer.sh} script is for installing pfSense .. is
this right?Just looking for some clarification on the PROPER
procedure for installing pfSense to the HDD.Thanks all
!!!--David L. StroutEngineering Systems Plus,
LLCVirus checked by G DATA
AntiVirusKit
Virus checked by G DATA AntiVirusKit
Re: [pfSense Support] ISO Images ... ??
Can't say that I have that problem. On 8/4/05, David Strout <[EMAIL PROTECTED]> wrote: > Everyone, > > Can anyone tell me what's going on with the ISO > images. I have tried several of the newest > releases (0.73.x, 0.72.x & 0.71.x) w/ all the same > results the system boots fine as a bootable > ISO, but when you run the install script > [/FreeSBIE/scripts/install.sh] it fails everytime > at the same point "Loading Backend" > > I have reverted to the 0.63.x branch to do new > installs then upgrade to the lated 0.73.x, but I > am really interested in doing a fresh install. > > Thoughts > > -- > David L. Strout > Engineering Systems Plus, LLC > > > > > - > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: [pfSense Support] ISO Images ... ??
I'm using 0.73.4.1 and it has installed fine for me three times now... I downloaded it yesterday. -Original Message- From: Scott Ullrich [mailto:[EMAIL PROTECTED] Sent: Thursday, August 04, 2005 12:56 PM To: David Strout Cc: support@pfsense.com Subject: Re: [pfSense Support] ISO Images ... ?? Can't say that I have that problem. On 8/4/05, David Strout <[EMAIL PROTECTED]> wrote: > Everyone, > > Can anyone tell me what's going on with the ISO > images. I have tried several of the newest > releases (0.73.x, 0.72.x & 0.71.x) w/ all the same > results the system boots fine as a bootable > ISO, but when you run the install script > [/FreeSBIE/scripts/install.sh] it fails everytime > at the same point "Loading Backend" > > I have reverted to the 0.63.x branch to do new > installs then upgrade to the lated 0.73.x, but I > am really interested in doing a fresh install. > > Thoughts > > -- > David L. Strout > Engineering Systems Plus, LLC > > > > > - > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[pfSense Support] ISO problems ... still
Anyone, I have tried burning all of the version 0.73.x ISOs, and still the problem of when you launch the "/FreeSBIE/scripts/install.sh" script it hangs on the "Waiting for Backend" ANSI screen. Additionally, a couple of mesages pop up on the bottom of the screen ... xl0 link changed state to DOWN & xl0 link tate changed to UP. BTW ... xl0 is configured for the WAN interface on the ISO boot up and pre-config. I'm at a loss ... tried a few BIOS tweaks and nothing seems to help. I'm wondering if anyone else is experiencing the same symptoms. BTW2 ... tried two different PC's a Dell GX260 & a generic PC running an AMD Athelon 700Mhz I have had no problems w/ prior versions (0.68.x), but this issue crept up in/or about the 0.73.0 version. Any ideas ? -- David L. Strout Engineering Systems Plus, LLC - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] ISO problems ... still
pfSense-LiveCD-0.74.4.iso is the latest. On 8/10/05, David Strout <[EMAIL PROTECTED]> wrote: > Anyone, > > I have tried burning all of the version 0.73.x > ISOs, and still the problem of when you launch the > "/FreeSBIE/scripts/install.sh" script it hangs on > the "Waiting for Backend" ANSI screen. > Additionally, a couple of mesages pop up on the > bottom of the screen ... xl0 link changed state to > DOWN & xl0 link tate changed to UP. > > BTW ... xl0 is configured for the WAN interface on > the ISO boot up and pre-config. > > I'm at a loss ... tried a few BIOS tweaks and > nothing seems to help. I'm wondering if anyone > else is experiencing the same symptoms. > > BTW2 ... tried two different PC's a Dell > GX260 & a generic PC running an AMD Athelon 700Mhz > > I have had no problems w/ prior versions (0.68.x), > but this issue crept up in/or about the 0.73.0 > version. > > Any ideas ? > > -- > David L. Strout > Engineering Systems Plus, LLC > > > > > - > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: [pfSense Support] ISO problems ... still
David and List, I,too have not been able to do a harddrive install on my Dell Dimension XPS R300 since V 0.63 or so.(Last version that the installer functioned properly) That version had a bug with DHCP Client on the WAN Interface. I get Kernel Page Faults about 50% of the install will all later LiveCDs. I don't have specific errors, but I tried about 6 different Live CDs versions. I tried Bios tweaks (NO sound, NO power Management, NO USB), different memory (Ran Extensive memory tests),different HD,CDROM Drives, Use known good 3Com 3c905b from my Monowall PC. As a New Version comes out and fails to install, I try different things (place HD and CDROM Drive on the Same IDE Channel or delete the Partition with DELPART), the list goes on and on. I tried the install on a Toshiba 300mhz Celeron and I get ATA IDENTITY issues. Someone will probably suggest install that earlier version ( I believe it was 0.63) and do a manual update from there, but the way this product is evolving that idea probable will not work. I really like this firewall (been using Monowall since pb27) but I just cannot get this SOB to install. The feature I am waiting to see is DANSGUARDIAN WebFilter with Squid Transparent Proxy. I can post the specific errors that I receive if need be (no time to do it now) Thanks for this great Product, Bill -Original Message- From: David Strout [mailto:[EMAIL PROTECTED] Sent: Wednesday, August 10, 2005 12:59 PM To: support@pfsense.com Subject: [pfSense Support] ISO problems ... still Anyone, I have tried burning all of the version 0.73.x ISOs, and still the problem of when you launch the "/FreeSBIE/scripts/install.sh" script it hangs on the "Waiting for Backend" ANSI screen. Additionally, a couple of mesages pop up on the bottom of the screen ... xl0 link changed state to DOWN & xl0 link tate changed to UP. BTW ... xl0 is configured for the WAN interface on the ISO boot up and pre-config. I'm at a loss ... tried a few BIOS tweaks and nothing seems to help. I'm wondering if anyone else is experiencing the same symptoms. BTW2 ... tried two different PC's a Dell GX260 & a generic PC running an AMD Athelon 700Mhz I have had no problems w/ prior versions (0.68.x), but this issue crept up in/or about the 0.73.0 version. Any ideas ? -- David L. Strout Engineering Systems Plus, LLC - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: [pfSense Support] ISO problems ... still
I'm in the same boat as well on Dell GX 110's. I have followed the 'upgrade solution' of installing 0.68.x and upgrading from there. > -Original Message- > From: William Pflaumer [mailto:[EMAIL PROTECTED] > Sent: Thursday, August 11, 2005 7:11 AM > To: David Strout > Cc: support@pfsense.com > Subject: RE: [pfSense Support] ISO problems ... still > > David and List, > I,too have not been able to do a harddrive install on my Dell Dimension > XPS > R300 since V 0.63 or so.(Last version that the installer functioned > properly) > That version had a bug with DHCP Client on the WAN Interface. I get Kernel > Page Faults about 50% of the install will all later LiveCDs. I don't have > specific errors, but I tried about 6 different Live CDs versions. I tried > Bios tweaks (NO sound, NO power Management, NO USB), different memory (Ran > Extensive memory tests),different HD,CDROM Drives, Use known good 3Com > 3c905b > from my Monowall PC. As a New Version comes out and fails to install, I > try > different things (place HD and CDROM Drive on the Same IDE Channel or > delete > the Partition with DELPART), the list goes on and on. I tried the install > on > a Toshiba 300mhz Celeron and I get ATA IDENTITY issues. > > Someone will probably suggest install that earlier version ( I believe it > was > 0.63) and do a manual update from there, but the way this product is > evolving > that idea probable will not work. I really like this firewall (been using > Monowall since pb27) but I just cannot get this SOB to install. The > feature I > am waiting to see is DANSGUARDIAN WebFilter with Squid Transparent Proxy. > > I can post the specific errors that I receive if need be (no time to do it > now) > > Thanks for this great Product, > > Bill > > -----Original Message- > From: David Strout [mailto:[EMAIL PROTECTED] > Sent: Wednesday, August 10, 2005 12:59 PM > To: support@pfsense.com > Subject: [pfSense Support] ISO problems ... still > > Anyone, > > I have tried burning all of the version 0.73.x > ISOs, and still the problem of when you launch the > "/FreeSBIE/scripts/install.sh" script it hangs on > the "Waiting for Backend" ANSI screen. > Additionally, a couple of mesages pop up on the > bottom of the screen ... xl0 link changed state to > DOWN & xl0 link tate changed to UP. > > BTW ... xl0 is configured for the WAN interface on > the ISO boot up and pre-config. > > I'm at a loss ... tried a few BIOS tweaks and > nothing seems to help. I'm wondering if anyone > else is experiencing the same symptoms. > > BTW2 ... tried two different PC's a Dell > GX260 & a generic PC running an AMD Athelon 700Mhz > > I have had no problems w/ prior versions (0.68.x), > but this issue crept up in/or about the 0.73.0 > version. > > Any ideas ? > > -- > David L. Strout > Engineering Systems Plus, LLC > > > > > - > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > > - > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] ISO problems ... still
We are working on this. Everyone please be patient. The installer is a tricky piece to get right for such a broad range of hardware and such. Scott On 8/11/05, Wesley Joyce <[EMAIL PROTECTED]> wrote: > I'm in the same boat as well on Dell GX 110's. I have followed the 'upgrade > solution' of installing 0.68.x and upgrading from there. > > > -Original Message- > > From: William Pflaumer [mailto:[EMAIL PROTECTED] > > Sent: Thursday, August 11, 2005 7:11 AM > > To: David Strout > > Cc: support@pfsense.com > > Subject: RE: [pfSense Support] ISO problems ... still > > > > David and List, > > I,too have not been able to do a harddrive install on my Dell Dimension > > XPS > > R300 since V 0.63 or so.(Last version that the installer functioned > > properly) > > That version had a bug with DHCP Client on the WAN Interface. I get Kernel > > Page Faults about 50% of the install will all later LiveCDs. I don't have > > specific errors, but I tried about 6 different Live CDs versions. I tried > > Bios tweaks (NO sound, NO power Management, NO USB), different memory (Ran > > Extensive memory tests),different HD,CDROM Drives, Use known good 3Com > > 3c905b > > from my Monowall PC. As a New Version comes out and fails to install, I > > try > > different things (place HD and CDROM Drive on the Same IDE Channel or > > delete > > the Partition with DELPART), the list goes on and on. I tried the install > > on > > a Toshiba 300mhz Celeron and I get ATA IDENTITY issues. > > > > Someone will probably suggest install that earlier version ( I believe it > > was > > 0.63) and do a manual update from there, but the way this product is > > evolving > > that idea probable will not work. I really like this firewall (been using > > Monowall since pb27) but I just cannot get this SOB to install. The > > feature I > > am waiting to see is DANSGUARDIAN WebFilter with Squid Transparent Proxy. > > > > I can post the specific errors that I receive if need be (no time to do it > > now) > > > > Thanks for this great Product, > > > > Bill > > > > -Original Message- > > From: David Strout [mailto:[EMAIL PROTECTED] > > Sent: Wednesday, August 10, 2005 12:59 PM > > To: support@pfsense.com > > Subject: [pfSense Support] ISO problems ... still > > > > Anyone, > > > > I have tried burning all of the version 0.73.x > > ISOs, and still the problem of when you launch the > > "/FreeSBIE/scripts/install.sh" script it hangs on > > the "Waiting for Backend" ANSI screen. > > Additionally, a couple of mesages pop up on the > > bottom of the screen ... xl0 link changed state to > > DOWN & xl0 link tate changed to UP. > > > > BTW ... xl0 is configured for the WAN interface on > > the ISO boot up and pre-config. > > > > I'm at a loss ... tried a few BIOS tweaks and > > nothing seems to help. I'm wondering if anyone > > else is experiencing the same symptoms. > > > > BTW2 ... tried two different PC's a Dell > > GX260 & a generic PC running an AMD Athelon 700Mhz > > > > I have had no problems w/ prior versions (0.68.x), > > but this issue crept up in/or about the 0.73.0 > > version. > > > > Any ideas ? > > > > -- > > David L. Strout > > Engineering Systems Plus, LLC > > > > > > > > > > - > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > - > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > - > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] ISO problems ... still
All, are you using SCSI by chance? Scott On 8/11/05, Wesley Joyce <[EMAIL PROTECTED]> wrote: > I'm in the same boat as well on Dell GX 110's. I have followed the 'upgrade > solution' of installing 0.68.x and upgrading from there. > > > -Original Message- > > From: William Pflaumer [mailto:[EMAIL PROTECTED] > > Sent: Thursday, August 11, 2005 7:11 AM > > To: David Strout > > Cc: support@pfsense.com > > Subject: RE: [pfSense Support] ISO problems ... still > > > > David and List, > > I,too have not been able to do a harddrive install on my Dell Dimension > > XPS > > R300 since V 0.63 or so.(Last version that the installer functioned > > properly) > > That version had a bug with DHCP Client on the WAN Interface. I get Kernel > > Page Faults about 50% of the install will all later LiveCDs. I don't have > > specific errors, but I tried about 6 different Live CDs versions. I tried > > Bios tweaks (NO sound, NO power Management, NO USB), different memory (Ran > > Extensive memory tests),different HD,CDROM Drives, Use known good 3Com > > 3c905b > > from my Monowall PC. As a New Version comes out and fails to install, I > > try > > different things (place HD and CDROM Drive on the Same IDE Channel or > > delete > > the Partition with DELPART), the list goes on and on. I tried the install > > on > > a Toshiba 300mhz Celeron and I get ATA IDENTITY issues. > > > > Someone will probably suggest install that earlier version ( I believe it > > was > > 0.63) and do a manual update from there, but the way this product is > > evolving > > that idea probable will not work. I really like this firewall (been using > > Monowall since pb27) but I just cannot get this SOB to install. The > > feature I > > am waiting to see is DANSGUARDIAN WebFilter with Squid Transparent Proxy. > > > > I can post the specific errors that I receive if need be (no time to do it > > now) > > > > Thanks for this great Product, > > > > Bill > > > > -Original Message- > > From: David Strout [mailto:[EMAIL PROTECTED] > > Sent: Wednesday, August 10, 2005 12:59 PM > > To: support@pfsense.com > > Subject: [pfSense Support] ISO problems ... still > > > > Anyone, > > > > I have tried burning all of the version 0.73.x > > ISOs, and still the problem of when you launch the > > "/FreeSBIE/scripts/install.sh" script it hangs on > > the "Waiting for Backend" ANSI screen. > > Additionally, a couple of mesages pop up on the > > bottom of the screen ... xl0 link changed state to > > DOWN & xl0 link tate changed to UP. > > > > BTW ... xl0 is configured for the WAN interface on > > the ISO boot up and pre-config. > > > > I'm at a loss ... tried a few BIOS tweaks and > > nothing seems to help. I'm wondering if anyone > > else is experiencing the same symptoms. > > > > BTW2 ... tried two different PC's a Dell > > GX260 & a generic PC running an AMD Athelon 700Mhz > > > > I have had no problems w/ prior versions (0.68.x), > > but this issue crept up in/or about the 0.73.0 > > version. > > > > Any ideas ? > > > > -- > > David L. Strout > > Engineering Systems Plus, LLC > > > > > > > > > > - > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > - > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > - > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] ISO problems ... still
I did a little digging on the FreeBSD, FreeSBIE and DragonFLY sites and found little or not relavant info, but I did a couple of Googles and found some pertinant info ... seems there is some known issues w/ installing *BSDs w/ the CD in a different IDE channel than the HDD that you are installing to. There are also lots of hits on disabling the APM (Power Mgmt.) . I have tried and tried to get the newest ISO (0.74.6) to work w/ many many different hardware configurations, but to no avail !!!Naything I can do to contribute to getting this worked out let me know I have a couple of test platforms to work w/ and a pretty outfitted lab at my disposl to test in.I did notice that unless you install fresh from the ISO some of the fixes don't apply correctly namely the delete icon on the "IPSec:SPD" page, and also I noticed that the fix for the adding DHCP only fixed itself (linking to the "edit static mapping" page) after up! grading to 0.74.8 today.GREAT JOB / AWESOME PRODUCT ... how can I be of more assistance ???--David L. StroutEngineering Systems Plus, LLC- Original Message -----Subject: Re: [pfSense Support] ISO problems ... stillFrom: [EMAIL PROTECTED]To: [EMAIL PROTECTED]Date: 08-11-2005 2:01 pmWe are working on this. Everyone please be patient. The installeris a tricky piece to get right for such a broad range of hardware andsuch.ScottOn 8/11/05, Wesley Joyce <[EMAIL PROTECTED]> wrote:> I'm in the same boat as well on Dell GX 110's. I have fol! lowed the 'upgrade> solution' of installing 0.68.x and upgrading from there.> > > -Original Message-> > From: William Pflaumer [mailto:[EMAIL PROTECTED]> > Sent: Thursday, August 11, 2005 7:11 AM> > To: David Strout> > Cc: support@pfsense.com> > Subject: RE: [pfSense Support] ISO problems ... still> >> > David and List,> > I,too have not been able to do a harddrive install on my Dell Dimension> > XPS> > R300 since V 0.63 or so.(Last version that the installer functioned> > properly)> > That version had a bug with DHCP Client on the WAN Interface. I get Kernel> > Page Faults about 50% of the install will all later LiveCDs. I don't have> > speci! fic errors, but I tried about 6 different Live CDs versions. I tried> > Bios tweaks (NO sound, NO power Management, NO USB), different memory (Ran> > Extensive memory tests),different HD,CDROM Drives, Use known good 3Com> > 3c905b> > from my Monowall PC. As a New Version comes out and fails to install, I> > try> > different things (place HD and CDROM Drive on the Same IDE Channel or> > delete> > the Partition with DELPART), the list goes on and on. I tried the install> > on> > a Toshiba 300mhz Celeron and I get ATA IDENTITY issues.> >> > Someone will probably suggest install that earlier version ( I believe it> > was> > 0.63) and do a manual update from there, but the way this product is> > evolving> > that idea probable will not work. I really like this firewall (been using> > ! Monowall since pb27) but I just cannot get this SOB to install. The> > feature I> > am waiting to see is DANSGUARDIAN WebFilter with Squid Transparent Proxy.> >> > I can post the specific errors that I receive if need be (no time to do it> > now)> >> > Thanks for this great Product,> >> > Bill> >> > -Original Message-> > From: David Strout [mailto:[EMAIL PROTECTED]> > Sent: Wednesday, August 10, 2005 12:59 PM> > To: support@pfsense.com> > Subject: [pfSense Support] ISO problems ... still> >> > Anyone,> >> > I have tried burning all of the version 0.73.x> > ISOs, and still the problem of when you launch t! he> > "/FreeSBIE/scripts/install.sh" script it hangs on> > the "Waiting for Backend" ANSI screen.> > Additionally, a couple of mesages pop up on the> > bottom of the screen ... xl0 link changed state to> > DOWN & xl0 link tate changed to UP.> >> > BTW ... xl0 is configured for the WAN interface on> > the ISO boot up and pre-config.> >> > I'm at a loss ... tried a few BIOS tweaks and> > nothing seems to help. I'm wondering if anyone> > else is experiencing the same symptoms.> >> > BTW2 ... tried two different PC's a Dell> > GX260 & a generic PC running an AMD Athelon 700Mhz> >> > I have had no problems w/ prior versions (0.68.x),> > but this issue crept up in/or about the 0.73.0> > version.> >> > Any ! ideas ?> >> > --> > David L. Strout> > Engineering Systems Plus, LLC> >> >> >> >> > --
Re: [pfSense Support] ISO problems ... still
We're hot on the trail now.I bet your using SCSI? Scott On 8/11/05, David Strout <[EMAIL PROTECTED]> wrote: > I did a little digging on the FreeBSD, FreeSBIE and DragonFLY sites and > found little or not relavant info, but I did a couple of Googles and found > some pertinant info ... seems there is some known issues w/ installing *BSDs > w/ the CD in a different IDE channel than the HDD that you are installing > to. There are also lots of hits on disabling the APM (Power Mgmt.) . I > have tried and tried to get the newest ISO (0.74.6) to work w/ many many > different hardware configurations, but to no avail !!! > > Naything I can do to contribute to getting this worked out let me know > I have a couple of test platforms to work w/ and a pretty outfitted lab at > my disposl to test in. > > I did notice that unless you install fresh from the ISO some of the fixes > don't apply correctly namely the delete icon on the "IPSec:SPD" page, > and also I noticed that the fix for the adding DHCP only fixed itself > (linking to the "edit static mapping" page) after up! grading to 0.74.8 > today. > > GREAT JOB / AWESOME PRODUCT ... how can I be of more assistance ??? > > -- > David L. Strout > Engineering Systems Plus, LLC > > > - Original Message - > Subject: Re: [pfSense Support] ISO problems ... still > From: [EMAIL PROTECTED] > To: [EMAIL PROTECTED] > Date: 08-11-2005 2:01 pm > > > We are working on this. Everyone please be patient. The installer > is a tricky piece to get right for such a broad range of hardware and > such. > > Scott > > > On 8/11/05, Wesley Joyce <[EMAIL PROTECTED]> wrote: > > I'm in the same boat as well on Dell GX 110's. I have fol! lowed the > 'upgrade > > solution' of installing 0.68.x and upgrading from there. > > > > > -Original Message- > > > From: William Pflaumer [mailto:[EMAIL PROTECTED] > > > Sent: Thursday, August 11, 2005 7:11 AM > > > To: David Strout > > > Cc: support@pfsense.com > > > Subject: RE: [pfSense Support] ISO problems ... still > > > > > > David and List, > > > I,too have not been able to do a harddrive install on my Dell Dimension > > > XPS > > > R300 since V 0.63 or so.(Last version that the installer functioned > > > properly) > > > That version had a bug with DHCP Client on the WAN Interface. I get > Kernel > > > Page Faults about 50% of the install will all later LiveCDs. I don't > have > > > speci! fic errors, but I tried about 6 different Live CDs versions. I > tried > > > > Bios tweaks (NO sound, NO power Management, NO USB), different memory > (Ran > > > Extensive memory tests),different HD,CDROM Drives, Use known good 3Com > > > 3c905b > > > from my Monowall PC. As a New Version comes out and fails to install, I > > > try > > > different things (place HD and CDROM Drive on the Same IDE Channel or > > > delete > > > the Partition with DELPART), the list goes on and on. I tried the > install > > > on > > > a Toshiba 300mhz Celeron and I get ATA IDENTITY issues. > > > > > > Someone will probably suggest install that earlier version ( I believe > it > > > was > > > 0.63) and do a manual update from there, but the way this product is > > > evolving > > > that idea probable will not work. I really like this firewall (been > using > > > ! Monowall since pb27) but I just cannot get this SOB to install. The > > > feature I > > > am waiting to see is DANSGUARDIAN WebFilter with Squid Transparent > Proxy. > > > > > > I can post the specific errors that I receive if need be (no time to do > it > > > now) > > > > > > Thanks for this great Product, > > > > > > Bill > > > > > > -Original Message- > > > From: David Strout [mailto:[EMAIL PROTECTED] > > > Sent: Wednesday, August 10, 2005 12:59 PM > > > To: support@pfsense.com > > > Subject: [pfSense Support] ISO problems ... still > > > > > > Anyone, > > > > > > I have tried burning all of the version 0.73.x > > > ISOs, and still the problem of when you launch t! he > > > "/FreeSBIE/scripts/install.sh" script it hangs on > > > the "Waiting for Backend" ANSI screen. > > > Additionally, a couple of mesages pop up on the > > > bottom of the screen ... xl0 link changed state to > > > DOWN & xl0 link
RE: [pfSense Support] ISO problems ... still
I am glad that the issue is being looked at. Let me know what you need from me in terms of errors. Thanks. > -Original Message- > From: Scott Ullrich [mailto:[EMAIL PROTECTED] > Sent: Thursday, August 11, 2005 2:01 PM > To: Wesley Joyce > Cc: William Pflaumer; David Strout; support@pfsense.com > Subject: Re: [pfSense Support] ISO problems ... still > > We are working on this. Everyone please be patient. The installer > is a tricky piece to get right for such a broad range of hardware and > such. > > Scott > > > On 8/11/05, Wesley Joyce <[EMAIL PROTECTED]> wrote: > > I'm in the same boat as well on Dell GX 110's. I have followed the > 'upgrade > > solution' of installing 0.68.x and upgrading from there. > > > > > -Original Message- > > > From: William Pflaumer [mailto:[EMAIL PROTECTED] > > > Sent: Thursday, August 11, 2005 7:11 AM > > > To: David Strout > > > Cc: support@pfsense.com > > > Subject: RE: [pfSense Support] ISO problems ... still > > > > > > David and List, > > > I,too have not been able to do a harddrive install on my Dell > Dimension > > > XPS > > > R300 since V 0.63 or so.(Last version that the installer functioned > > > properly) > > > That version had a bug with DHCP Client on the WAN Interface. I get > Kernel > > > Page Faults about 50% of the install will all later LiveCDs. I don't > have > > > specific errors, but I tried about 6 different Live CDs versions. I > tried > > > Bios tweaks (NO sound, NO power Management, NO USB), different memory > (Ran > > > Extensive memory tests),different HD,CDROM Drives, Use known good 3Com > > > 3c905b > > > from my Monowall PC. As a New Version comes out and fails to install, > I > > > try > > > different things (place HD and CDROM Drive on the Same IDE Channel or > > > delete > > > the Partition with DELPART), the list goes on and on. I tried the > install > > > on > > > a Toshiba 300mhz Celeron and I get ATA IDENTITY issues. > > > > > > Someone will probably suggest install that earlier version ( I believe > it > > > was > > > 0.63) and do a manual update from there, but the way this product is > > > evolving > > > that idea probable will not work. I really like this firewall (been > using > > > Monowall since pb27) but I just cannot get this SOB to install. The > > > feature I > > > am waiting to see is DANSGUARDIAN WebFilter with Squid Transparent > Proxy. > > > > > > I can post the specific errors that I receive if need be (no time to > do it > > > now) > > > > > > Thanks for this great Product, > > > > > > Bill > > > > > > -Original Message- > > > From: David Strout [mailto:[EMAIL PROTECTED] > > > Sent: Wednesday, August 10, 2005 12:59 PM > > > To: support@pfsense.com > > > Subject: [pfSense Support] ISO problems ... still > > > > > > Anyone, > > > > > > I have tried burning all of the version 0.73.x > > > ISOs, and still the problem of when you launch the > > > "/FreeSBIE/scripts/install.sh" script it hangs on > > > the "Waiting for Backend" ANSI screen. > > > Additionally, a couple of mesages pop up on the > > > bottom of the screen ... xl0 link changed state to > > > DOWN & xl0 link tate changed to UP. > > > > > > BTW ... xl0 is configured for the WAN interface on > > > the ISO boot up and pre-config. > > > > > > I'm at a loss ... tried a few BIOS tweaks and > > > nothing seems to help. I'm wondering if anyone > > > else is experiencing the same symptoms. > > > > > > BTW2 ... tried two different PC's a Dell > > > GX260 & a generic PC running an AMD Athelon 700Mhz > > > > > > I have had no problems w/ prior versions (0.68.x), > > > but this issue crept up in/or about the 0.73.0 > > > version. > > > > > > Any ideas ? > > > > > > -- > > > David L. Strout > > > Engineering Systems Plus, LLC > > > > > > > > > > > > > > > - > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > - > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > > - > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > - > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: [pfSense Support] ISO problems ... still
I was not at first and then I switched to a SCSI controller and SCSI HD to see if that helped. It did not. Sorry, I installed 0.67.8 then upgradeed to the latest 0.7x version. > -Original Message- > From: Scott Ullrich [mailto:[EMAIL PROTECTED] > Sent: Thursday, August 11, 2005 2:54 PM > To: Wesley Joyce > Cc: William Pflaumer; David Strout; support@pfsense.com > Subject: Re: [pfSense Support] ISO problems ... still > > All, are you using SCSI by chance? > > Scott > > > On 8/11/05, Wesley Joyce <[EMAIL PROTECTED]> wrote: > > I'm in the same boat as well on Dell GX 110's. I have followed the > 'upgrade > > solution' of installing 0.68.x and upgrading from there. > > > > > -Original Message- > > > From: William Pflaumer [mailto:[EMAIL PROTECTED] > > > Sent: Thursday, August 11, 2005 7:11 AM > > > To: David Strout > > > Cc: support@pfsense.com > > > Subject: RE: [pfSense Support] ISO problems ... still > > > > > > David and List, > > > I,too have not been able to do a harddrive install on my Dell > Dimension > > > XPS > > > R300 since V 0.63 or so.(Last version that the installer functioned > > > properly) > > > That version had a bug with DHCP Client on the WAN Interface. I get > Kernel > > > Page Faults about 50% of the install will all later LiveCDs. I don't > have > > > specific errors, but I tried about 6 different Live CDs versions. I > tried > > > Bios tweaks (NO sound, NO power Management, NO USB), different memory > (Ran > > > Extensive memory tests),different HD,CDROM Drives, Use known good 3Com > > > 3c905b > > > from my Monowall PC. As a New Version comes out and fails to install, > I > > > try > > > different things (place HD and CDROM Drive on the Same IDE Channel or > > > delete > > > the Partition with DELPART), the list goes on and on. I tried the > install > > > on > > > a Toshiba 300mhz Celeron and I get ATA IDENTITY issues. > > > > > > Someone will probably suggest install that earlier version ( I believe > it > > > was > > > 0.63) and do a manual update from there, but the way this product is > > > evolving > > > that idea probable will not work. I really like this firewall (been > using > > > Monowall since pb27) but I just cannot get this SOB to install. The > > > feature I > > > am waiting to see is DANSGUARDIAN WebFilter with Squid Transparent > Proxy. > > > > > > I can post the specific errors that I receive if need be (no time to > do it > > > now) > > > > > > Thanks for this great Product, > > > > > > Bill > > > > > > -Original Message- > > > From: David Strout [mailto:[EMAIL PROTECTED] > > > Sent: Wednesday, August 10, 2005 12:59 PM > > > To: support@pfsense.com > > > Subject: [pfSense Support] ISO problems ... still > > > > > > Anyone, > > > > > > I have tried burning all of the version 0.73.x > > > ISOs, and still the problem of when you launch the > > > "/FreeSBIE/scripts/install.sh" script it hangs on > > > the "Waiting for Backend" ANSI screen. > > > Additionally, a couple of mesages pop up on the > > > bottom of the screen ... xl0 link changed state to > > > DOWN & xl0 link tate changed to UP. > > > > > > BTW ... xl0 is configured for the WAN interface on > > > the ISO boot up and pre-config. > > > > > > I'm at a loss ... tried a few BIOS tweaks and > > > nothing seems to help. I'm wondering if anyone > > > else is experiencing the same symptoms. > > > > > > BTW2 ... tried two different PC's a Dell > > > GX260 & a generic PC running an AMD Athelon 700Mhz > > > > > > I have had no problems w/ prior versions (0.68.x), > > > but this issue crept up in/or about the 0.73.0 > > > version. > > > > > > Any ideas ? > > > > > > -- > > > David L. Strout > > > Engineering Systems Plus, LLC > > > > > > > > > > > > > > > - > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > - > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > > - > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > - > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: [pfSense Support] ISO problems ... still
I am going to try the latest ISO with a GX110 using the IDE HD and then SCSI and let you guys know. > -Original Message- > From: Scott Ullrich [mailto:[EMAIL PROTECTED] > Sent: Thursday, August 11, 2005 3:00 PM > To: David Strout > Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED]; support@pfsense.com > Subject: Re: [pfSense Support] ISO problems ... still > > We're hot on the trail now.I bet your using SCSI? > > Scott > > > On 8/11/05, David Strout <[EMAIL PROTECTED]> wrote: > > I did a little digging on the FreeBSD, FreeSBIE and DragonFLY sites and > > found little or not relavant info, but I did a couple of Googles and > found > > some pertinant info ... seems there is some known issues w/ installing > *BSDs > > w/ the CD in a different IDE channel than the HDD that you are > installing > > to. There are also lots of hits on disabling the APM (Power Mgmt.) > . I > > have tried and tried to get the newest ISO (0.74.6) to work w/ many many > > different hardware configurations, but to no avail !!! > > > > Naything I can do to contribute to getting this worked out let me know > > > I have a couple of test platforms to work w/ and a pretty outfitted lab > at > > my disposl to test in. > > > > I did notice that unless you install fresh from the ISO some of the > fixes > > don't apply correctly namely the delete icon on the "IPSec:SPD" > page, > > and also I noticed that the fix for the adding DHCP only fixed itself > > (linking to the "edit static mapping" page) after up! grading to 0.74.8 > > today. > > > > GREAT JOB / AWESOME PRODUCT ... how can I be of more assistance > ??? > > > > -- > > David L. Strout > > Engineering Systems Plus, LLC > > > > > > - Original Message - > > Subject: Re: [pfSense Support] ISO problems ... still > > From: [EMAIL PROTECTED] > > To: [EMAIL PROTECTED] > > Date: 08-11-2005 2:01 pm > > > > > > We are working on this. Everyone please be patient. The installer > > is a tricky piece to get right for such a broad range of hardware and > > such. > > > > Scott > > > > > > On 8/11/05, Wesley Joyce <[EMAIL PROTECTED]> wrote: > > > I'm in the same boat as well on Dell GX 110's. I have fol! lowed the > > 'upgrade > > > solution' of installing 0.68.x and upgrading from there. > > > > > > > -Original Message- > > > > From: William Pflaumer [mailto:[EMAIL PROTECTED] > > > > Sent: Thursday, August 11, 2005 7:11 AM > > > > To: David Strout > > > > Cc: support@pfsense.com > > > > Subject: RE: [pfSense Support] ISO problems ... still > > > > > > > > David and List, > > > > I,too have not been able to do a harddrive install on my Dell > Dimension > > > > XPS > > > > R300 since V 0.63 or so.(Last version that the installer functioned > > > > properly) > > > > That version had a bug with DHCP Client on the WAN Interface. I get > > Kernel > > > > Page Faults about 50% of the install will all later LiveCDs. I don't > > have > > > > speci! fic errors, but I tried about 6 different Live CDs versions. > I > > tried > > > > > > Bios tweaks (NO sound, NO power Management, NO USB), different > memory > > (Ran > > > > Extensive memory tests),different HD,CDROM Drives, Use known good > 3Com > > > > 3c905b > > > > from my Monowall PC. As a New Version comes out and fails to > install, I > > > > try > > > > different things (place HD and CDROM Drive on the Same IDE Channel > or > > > > delete > > > > the Partition with DELPART), the list goes on and on. I tried the > > install > > > > on > > > > a Toshiba 300mhz Celeron and I get ATA IDENTITY issues. > > > > > > > > Someone will probably suggest install that earlier version ( I > believe > > it > > > > was > > > > 0.63) and do a manual update from there, but the way this product is > > > > evolving > > > > that idea probable will not work. I really like this firewall (been > > using > > > > ! Monowall since pb27) but I just cannot get this SOB to install. > The > > > > feature I > > > > am waiting to see is DANSGUARDIAN WebFilter with Squid Transparent > > Proxy. > > > > > > > > I can post the specific errors
Re: [pfSense Support] ISO problems ... still
If it fails it would also be helpful to try running: /usr/local/bin/lua50c51 /usr/local/share/dfuibe_lua/main.lua \ dir.root=/FreeSBIE/ \ option.booted_from_install_media=true ... From a shell prompt to see if any lua errors kick up. Scott On 8/11/05, Wesley Joyce <[EMAIL PROTECTED]> wrote: > I am going to try the latest ISO with a GX110 using the IDE HD and then SCSI > and let you guys know. > > > -Original Message- > > From: Scott Ullrich [mailto:[EMAIL PROTECTED] > > Sent: Thursday, August 11, 2005 3:00 PM > > To: David Strout > > Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED]; support@pfsense.com > > Subject: Re: [pfSense Support] ISO problems ... still > > > > We're hot on the trail now.I bet your using SCSI? > > > > Scott > > > > > > On 8/11/05, David Strout <[EMAIL PROTECTED]> wrote: > > > I did a little digging on the FreeBSD, FreeSBIE and DragonFLY sites and > > > found little or not relavant info, but I did a couple of Googles and > > found > > > some pertinant info ... seems there is some known issues w/ installing > > *BSDs > > > w/ the CD in a different IDE channel than the HDD that you are > > installing > > > to. There are also lots of hits on disabling the APM (Power Mgmt.) > > . I > > > have tried and tried to get the newest ISO (0.74.6) to work w/ many many > > > different hardware configurations, but to no avail !!! > > > > > > Naything I can do to contribute to getting this worked out let me know > > > > > I have a couple of test platforms to work w/ and a pretty outfitted lab > > at > > > my disposl to test in. > > > > > > I did notice that unless you install fresh from the ISO some of the > > fixes > > > don't apply correctly namely the delete icon on the "IPSec:SPD" > > page, > > > and also I noticed that the fix for the adding DHCP only fixed itself > > > (linking to the "edit static mapping" page) after up! grading to 0.74.8 > > > today. > > > > > > GREAT JOB / AWESOME PRODUCT ... how can I be of more assistance > > ??? > > > > > > -- > > > David L. Strout > > > Engineering Systems Plus, LLC > > > > > > > > > - Original Message - > > > Subject: Re: [pfSense Support] ISO problems ... still > > > From: [EMAIL PROTECTED] > > > To: [EMAIL PROTECTED] > > > Date: 08-11-2005 2:01 pm > > > > > > > > > We are working on this. Everyone please be patient. The installer > > > is a tricky piece to get right for such a broad range of hardware and > > > such. > > > > > > Scott > > > > > > > > > On 8/11/05, Wesley Joyce <[EMAIL PROTECTED]> wrote: > > > > I'm in the same boat as well on Dell GX 110's. I have fol! lowed the > > > 'upgrade > > > > solution' of installing 0.68.x and upgrading from there. > > > > > > > > > -Original Message- > > > > > From: William Pflaumer [mailto:[EMAIL PROTECTED] > > > > > Sent: Thursday, August 11, 2005 7:11 AM > > > > > To: David Strout > > > > > Cc: support@pfsense.com > > > > > Subject: RE: [pfSense Support] ISO problems ... still > > > > > > > > > > David and List, > > > > > I,too have not been able to do a harddrive install on my Dell > > Dimension > > > > > XPS > > > > > R300 since V 0.63 or so.(Last version that the installer functioned > > > > > properly) > > > > > That version had a bug with DHCP Client on the WAN Interface. I get > > > Kernel > > > > > Page Faults about 50% of the install will all later LiveCDs. I don't > > > have > > > > > speci! fic errors, but I tried about 6 different Live CDs versions. > > I > > > tried > > > > > > > > Bios tweaks (NO sound, NO power Management, NO USB), different > > memory > > > (Ran > > > > > Extensive memory tests),different HD,CDROM Drives, Use known good > > 3Com > > > > > 3c905b > > > > > from my Monowall PC. As a New Version comes out and fails to > > install, I > > > > > try > > > > > different things (place HD and CDROM Drive on the Same IDE Channel > > or > > > > > delete > > > > > the Partition with DELPART), the list
Re: [pfSense Support] ISO problems ... still
David, You are definately on to something with the IDE channels. I have PFsense running just fine on my production box (Compaq) but I have been having a heck of a time getting it installed on a particular test machine (white box). I then started playing with FreeBSD, PC-BSD and DesktopBSD and none of them would install on my machine so I figured it was my box and left it alone for a while. Now that you mentioned it the CD is on the secondary IDE channel and the HD is on the primary channel. I'm gonna play tonight and see. I'll keep the list updated. Many people I know that build PC's always set the HD's on the primary channel and the CD' on the secondary. might be a common thing On 8/11/05, Scott Ullrich <[EMAIL PROTECTED]> wrote: > If it fails it would also be helpful to try running: > > /usr/local/bin/lua50c51 /usr/local/share/dfuibe_lua/main.lua \ > dir.root=/FreeSBIE/ \ > option.booted_from_install_media=true > > ... From a shell prompt to see if any lua errors kick up. > > Scott > > > On 8/11/05, Wesley Joyce <[EMAIL PROTECTED]> wrote: > > I am going to try the latest ISO with a GX110 using the IDE HD and then SCSI > > and let you guys know. > > > > > -Original Message- > > > From: Scott Ullrich [mailto:[EMAIL PROTECTED] > > > Sent: Thursday, August 11, 2005 3:00 PM > > > To: David Strout > > > Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED]; support@pfsense.com > > > Subject: Re: [pfSense Support] ISO problems ... still > > > > > > We're hot on the trail now.I bet your using SCSI? > > > > > > Scott > > > > > > > > > On 8/11/05, David Strout <[EMAIL PROTECTED]> wrote: > > > > I did a little digging on the FreeBSD, FreeSBIE and DragonFLY sites and > > > > found little or not relavant info, but I did a couple of Googles and > > > found > > > > some pertinant info ... seems there is some known issues w/ installing > > > *BSDs > > > > w/ the CD in a different IDE channel than the HDD that you are > > > installing > > > > to. There are also lots of hits on disabling the APM (Power Mgmt.) > > > . I > > > > have tried and tried to get the newest ISO (0.74.6) to work w/ many many > > > > different hardware configurations, but to no avail !!! > > > > > > > > Naything I can do to contribute to getting this worked out let me know > > > > > > > I have a couple of test platforms to work w/ and a pretty outfitted lab > > > at > > > > my disposl to test in. > > > > > > > > I did notice that unless you install fresh from the ISO some of the > > > fixes > > > > don't apply correctly namely the delete icon on the "IPSec:SPD" > > > page, > > > > and also I noticed that the fix for the adding DHCP only fixed itself > > > > (linking to the "edit static mapping" page) after up! grading to 0.74.8 > > > > today. > > > > > > > > GREAT JOB / AWESOME PRODUCT ... how can I be of more assistance > > > ??? > > > > > > > > -- > > > > David L. Strout > > > > Engineering Systems Plus, LLC > > > > > > > > > > > > - Original Message - > > > > Subject: Re: [pfSense Support] ISO problems ... still > > > > From: [EMAIL PROTECTED] > > > > To: [EMAIL PROTECTED] > > > > Date: 08-11-2005 2:01 pm > > > > > > > > > > > > We are working on this. Everyone please be patient. The installer > > > > is a tricky piece to get right for such a broad range of hardware and > > > > such. > > > > > > > > Scott > > > > > > > > > > > > On 8/11/05, Wesley Joyce <[EMAIL PROTECTED]> wrote: > > > > > I'm in the same boat as well on Dell GX 110's. I have fol! lowed the > > > > 'upgrade > > > > > solution' of installing 0.68.x and upgrading from there. > > > > > > > > > > > -Original Message- > > > > > > From: William Pflaumer [mailto:[EMAIL PROTECTED] > > > > > > Sent: Thursday, August 11, 2005 7:11 AM > > > > > > To: David Strout > > > > > > Cc: support@pfsense.com > > > > > > Subject: RE: [pfSense Support] ISO problems ... still > > > > > > > > > > > > David and List, > > > >
Re: [pfSense Support] ISO problems ... still
On 8/11/05, Kerry Schrantz <[EMAIL PROTECTED]> wrote: > David, You are definately on to something with the IDE channels. I > have PFsense running just fine on my production box (Compaq) but I > have been having a heck of a time getting it installed on a particular > test machine (white box). I then started playing with FreeBSD, PC-BSD > and DesktopBSD and none of them would install on my machine so I > figured it was my box and left it alone for a while. Now that you > mentioned it the CD is on the secondary IDE channel and the HD is on > the primary channel. I'm gonna play tonight and see. I'll keep the > list updated. Many people I know that build PC's always set the HD's > on the primary channel and the CD' on the secondary. might be a common > thing > All the boxes I've tried have the HD in primary and CD on secondary and I haven't had issues. Most PC's are setup that way, so I think we'd be seeing a LOT more issues if that was always the case. Especially with FreeBSD, given the number of installs out there. I've installed dozens of different FreeBSD systems with HD on primary and CD on secondary with no issues. If you see the same issues with DesktopBSD, FreeSBIE, DragonFly, and pfsense, that's understandable as they all use the BSD Installer. When you throw FreeBSD into the mix, it starts to make a lot less sense. Those using Dell systems, do you have the latest BIOS on them? On older Dell systems I've had some weird problems with FreeBSD due to BIOS bugs. An upgrade to the latest BIOS resolved them. there's obviously still something else going on here, but that's a good thing to do in the mean time. ;) -cmb - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] ISO problems ... still
DesktopBSD actually doesn't use BSDInstaller. So that's most likely going to change the equation. On 8/11/05, Chris Buechler <[EMAIL PROTECTED]> wrote: > On 8/11/05, Kerry Schrantz <[EMAIL PROTECTED]> wrote: > > David, You are definately on to something with the IDE channels. I > > have PFsense running just fine on my production box (Compaq) but I > > have been having a heck of a time getting it installed on a particular > > test machine (white box). I then started playing with FreeBSD, PC-BSD > > and DesktopBSD and none of them would install on my machine so I > > figured it was my box and left it alone for a while. Now that you > > mentioned it the CD is on the secondary IDE channel and the HD is on > > the primary channel. I'm gonna play tonight and see. I'll keep the > > list updated. Many people I know that build PC's always set the HD's > > on the primary channel and the CD' on the secondary. might be a common > > thing > > > > All the boxes I've tried have the HD in primary and CD on secondary > and I haven't had issues. Most PC's are setup that way, so I think > we'd be seeing a LOT more issues if that was always the case. > Especially with FreeBSD, given the number of installs out there. I've > installed dozens of different FreeBSD systems with HD on primary and > CD on secondary with no issues. > > If you see the same issues with DesktopBSD, FreeSBIE, DragonFly, and > pfsense, that's understandable as they all use the BSD Installer. > When you throw FreeBSD into the mix, it starts to make a lot less > sense. > > Those using Dell systems, do you have the latest BIOS on them? On > older Dell systems I've had some weird problems with FreeBSD due to > BIOS bugs. An upgrade to the latest BIOS resolved them. there's > obviously still something else going on here, but that's a good thing > to do in the mean time. ;) > > -cmb > > - > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] ISO problems ... still
I've posted a new iso. 0.75 will be copying slowly to the mirrors. Please give this a try. Scott On 8/11/05, Scott Ullrich <[EMAIL PROTECTED]> wrote: > DesktopBSD actually doesn't use BSDInstaller. So that's most likely > going to change the equation. > > On 8/11/05, Chris Buechler <[EMAIL PROTECTED]> wrote: > > On 8/11/05, Kerry Schrantz <[EMAIL PROTECTED]> wrote: > > > David, You are definately on to something with the IDE channels. I > > > have PFsense running just fine on my production box (Compaq) but I > > > have been having a heck of a time getting it installed on a particular > > > test machine (white box). I then started playing with FreeBSD, PC-BSD > > > and DesktopBSD and none of them would install on my machine so I > > > figured it was my box and left it alone for a while. Now that you > > > mentioned it the CD is on the secondary IDE channel and the HD is on > > > the primary channel. I'm gonna play tonight and see. I'll keep the > > > list updated. Many people I know that build PC's always set the HD's > > > on the primary channel and the CD' on the secondary. might be a common > > > thing > > > > > > > All the boxes I've tried have the HD in primary and CD on secondary > > and I haven't had issues. Most PC's are setup that way, so I think > > we'd be seeing a LOT more issues if that was always the case. > > Especially with FreeBSD, given the number of installs out there. I've > > installed dozens of different FreeBSD systems with HD on primary and > > CD on secondary with no issues. > > > > If you see the same issues with DesktopBSD, FreeSBIE, DragonFly, and > > pfsense, that's understandable as they all use the BSD Installer. > > When you throw FreeBSD into the mix, it starts to make a lot less > > sense. > > > > Those using Dell systems, do you have the latest BIOS on them? On > > older Dell systems I've had some weird problems with FreeBSD due to > > BIOS bugs. An upgrade to the latest BIOS resolved them. there's > > obviously still something else going on here, but that's a good thing > > to do in the mean time. ;) > > > > -cmb > > > > - > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: [pfSense Support] ISO problems ... still
Okay gentlemen, using pfSense-LiveCD-0.74.8 and a single Dell GX110 running the latest BIOS (version A09) with an Adaptec 2940UW adapter and an 18GB Seagate Barracuda drive, I could 1. Not install to the SCSI HDD when the CDROM was on the secondary bus as a master device. 2. I could install to the same SCSI HDD when the CDROM was on the primary bus as a master device. On the same GX110, with the SCSI devices removed, I could 1. Install to IDE HDD with the CDROM as a slave device on the primary bus. 2. Not install to IDE HDD with the CDROM as a master on the secondary bus. So it is evident there is a problem with the installer and the source and target being on two different buses. I don’t know about you guys, but I don’t need the CDROM access once I get installed. J. But it is annoying if you don’t know the workaround. From: David Strout [mailto:[EMAIL PROTECTED] Sent: Thursday, August 11, 2005 3:03 PM To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Cc: [EMAIL PROTECTED]; support@pfsense.com Subject: Re: [pfSense Support] ISO problems ... still I did a little digging on the FreeBSD, FreeSBIE and DragonFLY sites and found little or not relavant info, but I did a couple of Googles and found some pertinant info ... seems there is some known issues w/ installing *BSDs w/ the CD in a different IDE channel than the HDD that you are installing to. There are also lots of hits on disabling the APM (Power Mgmt.) . I have tried and tried to get the newest ISO (0.74.6) to work w/ many many different hardware configurations, but to no avail !!! Naything I can do to contribute to getting this worked out let me know I have a couple of test platforms to work w/ and a pretty outfitted lab at my disposl to test in. I did notice that unless you install fresh from the ISO some of the fixes don't apply correctly namely the delete icon on the "IPSec:SPD" page, and also I noticed that the fix for the adding DHCP only fixed itself (linking to the "edit static mapping" page) after up! grading to 0.74.8 today. GREAT JOB / AWESOME PRODUCT ... how can I be of more assistance ??? -- David L. Strout Engineering Systems Plus, LLC - Original Message ----- Subject: Re: [pfSense Support] ISO problems ... still From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Date: 08-11-2005 2:01 pm We are working on this. Everyone please be patient. The installer is a tricky piece to get right for such a broad range of hardware and such. Scott On 8/11/05, Wesley Joyce <[EMAIL PROTECTED]> wrote: > I'm in the same boat as well on Dell GX 110's. I have fol! lowed the 'upgrade > solution' of installing 0.68.x and upgrading from there. > > > -Original Message- > > From: William Pflaumer [mailto:[EMAIL PROTECTED] > > Sent: Thursday, August 11, 2005 7:11 AM > > To: David Strout > > Cc: support@pfsense.com > > Subject: RE: [pfSense Support] ISO problems ... still > > > > David and List, > > I,too have not been able to do a harddrive install on my Dell Dimension > > XPS > > R300 since V 0.63 or so.(Last version that the installer functioned > > properly) > > That version had a bug with DHCP Client on the WAN Interface. I get Kernel > > Page Faults about 50% of the install will all later LiveCDs. I don't have > > speci! fic errors, but I tried about 6 different Live CDs versions. I tried > > Bios tweaks (NO sound, NO power Management, NO USB), different memory (Ran > > Extensive memory tests),different HD,CDROM Drives, Use known good 3Com > > 3c905b > > from my Monowall PC. As a New Version comes out and fails to install, I > > try > > different things (place HD and CDROM Drive on the Same IDE Channel or > > delete > > the Partition with DELPART), the list goes on and on. I tried the install > > on > > a Toshiba 300mhz Celeron and I get ATA IDENTITY issues. > > > > Someone will probably suggest install that earlier version ( I believe it > > was > > 0.63) and do a manual update from there, but the way this product is > > evolving > > that idea probable will not work. I really like this firewall (been using > > ! Monowall since pb27) but I just cannot get this SOB to install. The > > feature I > > am waiting to see is DANSGUARDIAN WebFilter with Squid Transparent Proxy. > > > > I can post the specific errors that I receive if need be (no time to do it > > now) > > > > Thanks for this great Product, > > > > Bill > > > > -Original Message- > > From: David Strout [mailto:[EMAIL PROTECTED] > > Sent: Wednesday, August 10, 2005 12:59 PM > > To: support@pfsense.com > > Subject: [pfSense Support] ISO pro
RE: [pfSense Support] ISO problems ... still
Okay, 0.75 installed fine as well to the SCSI HD with the CDROM as a primary master. My guess that there is a large file or directory being copied right around the 50, 53% completion point and not enough data wasn’t making it between the two buses? From: Wesley Joyce [mailto:[EMAIL PROTECTED] Sent: Thursday, August 11, 2005 5:12 PM To: [EMAIL PROTECTED]; 'David Strout' Cc: [EMAIL PROTECTED]; support@pfsense.com Subject: RE: [pfSense Support] ISO problems ... still Okay gentlemen, using pfSense-LiveCD-0.74.8 and a single Dell GX110 running the latest BIOS (version A09) with an Adaptec 2940UW adapter and an 18GB Seagate Barracuda drive, I could 1. Not install to the SCSI HDD when the CDROM was on the secondary bus as a master device. 2. I could install to the same SCSI HDD when the CDROM was on the primary bus as a master device. On the same GX110, with the SCSI devices removed, I could 1. Install to IDE HDD with the CDROM as a slave device on the primary bus. 2. Not install to IDE HDD with the CDROM as a master on the secondary bus. So it is evident there is a problem with the installer and the source and target being on two different buses. I don’t know about you guys, but I don’t need the CDROM access once I get installed. J. But it is annoying if you don’t know the workaround. From: David Strout [mailto:[EMAIL PROTECTED] Sent: Thursday, August 11, 2005 3:03 PM To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Cc: [EMAIL PROTECTED]; support@pfsense.com Subject: Re: [pfSense Support] ISO problems ... still I did a little digging on the FreeBSD, FreeSBIE and DragonFLY sites and found little or not relavant info, but I did a couple of Googles and found some pertinant info ... seems there is some known issues w/ installing *BSDs w/ the CD in a different IDE channel than the HDD that you are installing to. There are also lots of hits on disabling the APM (Power Mgmt.) . I have tried and tried to get the newest ISO (0.74.6) to work w/ many many different hardware configurations, but to no avail !!! Naything I can do to contribute to getting this worked out let me know I have a couple of test platforms to work w/ and a pretty outfitted lab at my disposl to test in. I did notice that unless you install fresh from the ISO some of the fixes don't apply correctly namely the delete icon on the "IPSec:SPD" page, and also I noticed that the fix for the adding DHCP only fixed itself (linking to the "edit static mapping" page) after up! grading to 0.74.8 today. GREAT JOB / AWESOME PRODUCT ... how can I be of more assistance ??? -- David L. Strout Engineering Systems Plus, LLC - Original Message ----- Subject: Re: [pfSense Support] ISO problems ... still From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Date: 08-11-2005 2:01 pm We are working on this. Everyone please be patient. The installer is a tricky piece to get right for such a broad range of hardware and such. Scott On 8/11/05, Wesley Joyce <[EMAIL PROTECTED]> wrote: > I'm in the same boat as well on Dell GX 110's. I have fol! lowed the 'upgrade > solution' of installing 0.68.x and upgrading from there. > > > -Original Message- > > From: William Pflaumer [mailto:[EMAIL PROTECTED] > > Sent: Thursday, August 11, 2005 7:11 AM > > To: David Strout > > Cc: support@pfsense.com > > Subject: RE: [pfSense Support] ISO problems ... still > > > > David and List, > > I,too have not been able to do a harddrive install on my Dell Dimension > > XPS > > R300 since V 0.63 or so.(Last version that the installer functioned > > properly) > > That version had a bug with DHCP Client on the WAN Interface. I get Kernel > > Page Faults about 50% of the install will all later LiveCDs. I don't have > > speci! fic errors, but I tried about 6 different Live CDs versions. I tried > > Bios tweaks (NO sound, NO power Management, NO USB), different memory (Ran > > Extensive memory tests),different HD,CDROM Drives, Use known good 3Com > > 3c905b > > from my Monowall PC. As a New Version comes out and fails to install, I > > try > > different things (place HD and CDROM Drive on the Same IDE Channel or > > delete > > the Partition with DELPART), the list goes on and on. I tried the install > > on > > a Toshiba 300mhz Celeron and I get ATA IDENTITY issues. > > > > Someone will probably suggest install that earlier version ( I believe it > > was > > 0.63) and do a manual update from there, but the way this product is > > evolving > > that idea probable will not work. I really like this firewall (been using > > ! Monowall since pb27) but I just cannot get this SOB to install. The > > fe
Re: [pfSense Support] ISO problems ... still
So the problem is fixed now in 0.75? Scott On 8/11/05, Wesley Joyce <[EMAIL PROTECTED]> wrote: > > > > > > Okay, 0.75 installed fine as well to the SCSI HD with the CDROM as a primary > master. > > > > My guess that there is a large file or directory being copied right around > the 50, 53% completion point and not enough data wasn't making it between > the two buses? > > > > > > > > From: Wesley Joyce [mailto:[EMAIL PROTECTED] > Sent: Thursday, August 11, 2005 5:12 PM > To: [EMAIL PROTECTED]; 'David Strout' > Cc: [EMAIL PROTECTED]; support@pfsense.com > Subject: RE: [pfSense Support] ISO problems ... still > > > > > Okay gentlemen, using pfSense-LiveCD-0.74.8 and a single Dell GX110 running > the latest BIOS (version A09) with an Adaptec 2940UW adapter and an 18GB > Seagate Barracuda drive, I could > > > > 1. Not install to the SCSI HDD when the CDROM was on the secondary bus as a > master device. > > > > 2. I could install to the same SCSI HDD when the CDROM was on the primary > bus as a master device. > > > > On the same GX110, with the SCSI devices removed, I could > > > > 1.Install to IDE HDD with the CDROM as a slave device on the primary > bus. > > > > 2.Not install to IDE HDD with the CDROM as a master on the secondary > bus. > > > > So it is evident there is a problem with the installer and the source and > target being on two different buses. > > > > I don't know about you guys, but I don't need the CDROM access once I get > installed. J. But it is annoying if you don't know the workaround. > > > > > ________ > > > From: David Strout [mailto:[EMAIL PROTECTED] > Sent: Thursday, August 11, 2005 3:03 PM > To: [EMAIL PROTECTED]; [EMAIL PROTECTED] > Cc: [EMAIL PROTECTED]; support@pfsense.com > Subject: Re: [pfSense Support] ISO problems ... still > > > > I did a little digging on the FreeBSD, FreeSBIE and DragonFLY sites and > found little or not relavant info, but I did a couple of Googles and found > some pertinant info ... seems there is some known issues w/ installing *BSDs > w/ the CD in a different IDE channel than the HDD that you are installing > to. There are also lots of hits on disabling the APM (Power Mgmt.) . I > have tried and tried to get the newest ISO (0.74.6) to work w/ many many > different hardware configurations, but to no avail !!! > > Naything I can do to contribute to getting this worked out let me know > I have a couple of test platforms to work w/ and a pretty outfitted lab at > my disposl to test in. > > I did notice that unless you install fresh from the ISO some of the fixes > don't apply correctly namely the delete icon on the "IPSec:SPD" page, > and also I noticed that the fix for the adding DHCP only fixed itself > (linking to the "edit static mapping" page) after up! grading to 0.74.8 > today. > > GREAT JOB / AWESOME PRODUCT ... how can I be of more assistance > ??? > > -- > David L. Strout > Engineering Systems Plus, LLC > > > > > - Original Message - > Subject: Re: [pfSense Support] ISO problems ... still > From: [EMAIL PROTECTED] > To: [EMAIL PROTECTED] > Date: 08-11-2005 2:01 pm > > > We are working on this. Everyone please be patient. The installer > is a tricky piece to get right for such a broad range of hardware and > such. > > Scott > > > On 8/11/05, Wesley Joyce <[EMAIL PROTECTED]> wrote: > > I'm in the same boat as well on Dell GX 110's. I have fol! lowed the > 'upgrade > > solution' of installing 0.68.x and upgrading from there. > > > > > -Original Message- > > > From: William Pflaumer [mailto:[EMAIL PROTECTED] > > > Sent: Thursday, August 11, 2005 7:11 AM > > > To: David Strout > > > Cc: support@pfsense.com > > > Subject: RE: [pfSense Support] ISO problems ... still > > > > > > David and List, > > > I,too have not been able to do a harddrive install on my Dell Dimension > > > XPS > > > R300 since V 0.63 or so.(Last version that the installer functioned > > > properly) > > > That version had a bug with DHCP Client on the WAN Interface. I get > Kernel > > > Page Faults about 50% of the install will all later LiveCDs. I don't > have > > > speci! fic errors, bu
RE: [pfSense Support] ISO problems ... still
Maybe this is the problem with Virtual Server 2005 SP0 as well? The default is to have the CDROM virtual device as the secondary master... Dimitri Rodis Integrita Systems LLC -Original Message- From: Scott Ullrich [mailto:[EMAIL PROTECTED] Sent: Thursday, August 11, 2005 2:39 PM To: Wesley Joyce Cc: support@pfsense.com Subject: Re: [pfSense Support] ISO problems ... still So the problem is fixed now in 0.75? Scott On 8/11/05, Wesley Joyce <[EMAIL PROTECTED]> wrote: > > > > > > Okay, 0.75 installed fine as well to the SCSI HD with the CDROM as a > primary master. > > > > My guess that there is a large file or directory being copied right > around the 50, 53% completion point and not enough data wasn't making > it between the two buses? > > > > > > > > From: Wesley Joyce [mailto:[EMAIL PROTECTED] > Sent: Thursday, August 11, 2005 5:12 PM > To: [EMAIL PROTECTED]; 'David Strout' > Cc: [EMAIL PROTECTED]; support@pfsense.com > Subject: RE: [pfSense Support] ISO problems ... still > > > > > Okay gentlemen, using pfSense-LiveCD-0.74.8 and a single Dell GX110 > running the latest BIOS (version A09) with an Adaptec 2940UW adapter > and an 18GB Seagate Barracuda drive, I could > > > > 1. Not install to the SCSI HDD when the CDROM was on the secondary > bus as a master device. > > > > 2. I could install to the same SCSI HDD when the CDROM was on the > primary bus as a master device. > > > > On the same GX110, with the SCSI devices removed, I could > > > > 1.Install to IDE HDD with the CDROM as a slave device on the primary > bus. > > > > 2.Not install to IDE HDD with the CDROM as a master on the secondary > bus. > > > > So it is evident there is a problem with the installer and the source and > target being on two different buses. > > > > I don't know about you guys, but I don't need the CDROM access once I > get installed. J. But it is annoying if you don't know the workaround. > > > > > ________ > > > From: David Strout [mailto:[EMAIL PROTECTED] > Sent: Thursday, August 11, 2005 3:03 PM > To: [EMAIL PROTECTED]; [EMAIL PROTECTED] > Cc: [EMAIL PROTECTED]; support@pfsense.com > Subject: Re: [pfSense Support] ISO problems ... still > > > > I did a little digging on the FreeBSD, FreeSBIE and DragonFLY sites > and found little or not relavant info, but I did a couple of Googles > and found some pertinant info ... seems there is some known issues w/ > installing *BSDs w/ the CD in a different IDE channel than the HDD > that you are installing to. There are also lots of hits on disabling > the APM (Power Mgmt.) . I have tried and tried to get the newest > ISO (0.74.6) to work w/ many many different hardware configurations, but to no avail !!! > > Naything I can do to contribute to getting this worked out let me know > I have a couple of test platforms to work w/ and a pretty outfitted > lab at my disposl to test in. > > I did notice that unless you install fresh from the ISO some of the > fixes don't apply correctly namely the delete icon on the > "IPSec:SPD" page, and also I noticed that the fix for the adding DHCP > only fixed itself (linking to the "edit static mapping" page) after > up! grading to 0.74.8 today. > > GREAT JOB / AWESOME PRODUCT ... how can I be of more > assistance ??? > > -- > David L. Strout > Engineering Systems Plus, LLC > > > > > - Original Message - > Subject: Re: [pfSense Support] ISO problems ... still > From: [EMAIL PROTECTED] > To: [EMAIL PROTECTED] > Date: 08-11-2005 2:01 pm > > > We are working on this. Everyone please be patient. The installer is > a tricky piece to get right for such a broad range of hardware and > such. > > Scott > > > On 8/11/05, Wesley Joyce <[EMAIL PROTECTED]> wrote: > > I'm in the same boat as well on Dell GX 110's. I have fol! lowed > the 'upgrade > solution' of installing 0.68.x and upgrading from > there. > > > > > -Original Message- > > > From: William Pflaumer [mailto:[EMAIL PROTECTED] > > Sent: > Thursday, August 11, 2005 7:11 AM > > To: David Strout > > Cc: > support@pfsense.com > > Subject: RE: [pfSense Support] ISO problems > ... still > > > > David and List, > > I,too have not been able to > do a harddrive i
Re: [pfSense Support] ISO problems ... still
On 8/11/05, Dimitri Rodis <[EMAIL PROTECTED]> wrote: > Maybe this is the problem with Virtual Server 2005 SP0 as well? The > default is to have the CDROM virtual device as the secondary master... Worth a shot! Scott - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: [pfSense Support] ISO problems ... still
The workaround works. I haven't tried with the CDROM on the secondary bus yet. > -Original Message- > From: Scott Ullrich [mailto:[EMAIL PROTECTED] > Sent: Thursday, August 11, 2005 5:39 PM > To: Wesley Joyce > Cc: support@pfsense.com > Subject: Re: [pfSense Support] ISO problems ... still > > So the problem is fixed now in 0.75? > > Scott > > > On 8/11/05, Wesley Joyce <[EMAIL PROTECTED]> wrote: > > > > > > > > > > > > Okay, 0.75 installed fine as well to the SCSI HD with the CDROM as a > primary > > master. > > > > > > > > My guess that there is a large file or directory being copied right > around > > the 50, 53% completion point and not enough data wasn't making it > between > > the two buses? > > > > > > > > > > > > > > > > From: Wesley Joyce [mailto:[EMAIL PROTECTED] > > Sent: Thursday, August 11, 2005 5:12 PM > > To: [EMAIL PROTECTED]; 'David Strout' > > Cc: [EMAIL PROTECTED]; support@pfsense.com > > Subject: RE: [pfSense Support] ISO problems ... still > > > > > > > > > > Okay gentlemen, using pfSense-LiveCD-0.74.8 and a single Dell GX110 > running > > the latest BIOS (version A09) with an Adaptec 2940UW adapter and an 18GB > > Seagate Barracuda drive, I could > > > > > > > > 1. Not install to the SCSI HDD when the CDROM was on the secondary bus > as a > > master device. > > > > > > > > 2. I could install to the same SCSI HDD when the CDROM was on the > primary > > bus as a master device. > > > > > > > > On the same GX110, with the SCSI devices removed, I could > > > > > > > > 1.Install to IDE HDD with the CDROM as a slave device on the > primary > > bus. > > > > > > > > 2.Not install to IDE HDD with the CDROM as a master on the > secondary > > bus. > > > > > > > > So it is evident there is a problem with the installer and the source > and > > target being on two different buses. > > > > > > > > I don't know about you guys, but I don't need the CDROM access once I > get > > installed. J. But it is annoying if you don't know the workaround. > > > > > > > > > > > > > > > > From: David Strout [mailto:[EMAIL PROTECTED] > > Sent: Thursday, August 11, 2005 3:03 PM > > To: [EMAIL PROTECTED]; [EMAIL PROTECTED] > > Cc: [EMAIL PROTECTED]; support@pfsense.com > > Subject: Re: [pfSense Support] ISO problems ... still > > > > > > > > I did a little digging on the FreeBSD, FreeSBIE and DragonFLY sites and > > found little or not relavant info, but I did a couple of Googles and > found > > some pertinant info ... seems there is some known issues w/ installing > *BSDs > > w/ the CD in a different IDE channel than the HDD that you are > installing > > to. There are also lots of hits on disabling the APM (Power Mgmt.) > . I > > have tried and tried to get the newest ISO (0.74.6) to work w/ many many > > different hardware configurations, but to no avail !!! > > > > Naything I can do to contribute to getting this worked out let me know > .... > > I have a couple of test platforms to work w/ and a pretty outfitted lab > at > > my disposl to test in. > > > > I did notice that unless you install fresh from the ISO some of the > fixes > > don't apply correctly namely the delete icon on the "IPSec:SPD" > page, > > and also I noticed that the fix for the adding DHCP only fixed itself > > (linking to the "edit static mapping" page) after up! grading to 0.74.8 > > today. > > > > GREAT JOB / AWESOME PRODUCT ... how can I be of more > assistance > > ??? > > > > -- > > David L. Strout > > Engineering Systems Plus, LLC > > > > > > > > > > ----- Original Message - > > Subject: Re: [pfSense Support] ISO problems ... still > > From: [EMAIL PROTECTED] > > To: [EMAIL PROTECTED] > > Date: 08-11-2005 2:01 pm > > > > > > We are working on this. Everyone please be patient. The installer > > is a tricky piece to get right for such a broad range of hardware and > > such. > > > > Scott > > > > > > On 8/11/05, Wesley Joyce <[EMAIL PROTECTED]> wrote: > > > I'm in the same boat as we
Re: [pfSense Support] ISO problems ... still
On 8/11/05, Wesley Joyce <[EMAIL PROTECTED]> wrote: > The workaround works. I haven't tried with the CDROM on the secondary bus > yet. So basically 0.75 does not fix the problem but the moving of the CDROM to another bus does? Scott - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: [pfSense Support] ISO problems ... still
Yup, that did it. All I did was move the CDROM from Secondary Master to Primary Slave and the install went right thru. This was on 0.73.8. Dimitri Rodis Integrita Systems LLC -Original Message- From: Scott Ullrich [mailto:[EMAIL PROTECTED] Sent: Thursday, August 11, 2005 2:55 PM To: Dimitri Rodis Cc: Wesley Joyce; support@pfsense.com Subject: Re: [pfSense Support] ISO problems ... still On 8/11/05, Dimitri Rodis <[EMAIL PROTECTED]> wrote: > Maybe this is the problem with Virtual Server 2005 SP0 as well? The > default is to have the CDROM virtual device as the secondary master... Worth a shot! Scott - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] ISO problems ... still
On 8/11/05, Dimitri Rodis <[EMAIL PROTECTED]> wrote: > Yup, that did it. > > All I did was move the CDROM from Secondary Master to Primary Slave and > the install went right thru. This was on 0.73.8. Okay thanks. Let me see if this can help us narrow down the problem. Scott - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] ISO problems ... still
Ok, I can second Dimitri. Moving the CD from Secondary Master to Primary Slave did the trick for me as well. On both pfSense on DesktopBSD. Haven't done FreeBSD or PCBSD yet but this looks promising. Dimitri, what hardware are you running? I'm... MSI K7T Pro2 Duron 1.2 256 - PC2700 Maxtor 6L040J2 (40Gig) ATI AIO Pro128 Samsung 52x CDROM On 8/11/05, Scott Ullrich <[EMAIL PROTECTED]> wrote: > On 8/11/05, Dimitri Rodis <[EMAIL PROTECTED]> wrote: > > Yup, that did it. > > > > All I did was move the CDROM from Secondary Master to Primary Slave and > > the install went right thru. This was on 0.73.8. > > Okay thanks. Let me see if this can help us narrow down the problem. > > Scott > > - > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] ISO problems ... still
Hrm..I've got a GX110 sitting on my desk here that I installed FreeBSD on just fine. If I can dig up another HD, I'll try the install on it. --Bill On 8/11/05, Wesley Joyce <[EMAIL PROTECTED]> wrote: > I'm in the same boat as well on Dell GX 110's. I have followed the 'upgrade > solution' of installing 0.68.x and upgrading from there. > > > -Original Message- > > From: William Pflaumer [mailto:[EMAIL PROTECTED] > > Sent: Thursday, August 11, 2005 7:11 AM > > To: David Strout > > Cc: support@pfsense.com > > Subject: RE: [pfSense Support] ISO problems ... still > > > > David and List, > > I,too have not been able to do a harddrive install on my Dell Dimension > > XPS > > R300 since V 0.63 or so.(Last version that the installer functioned > > properly) > > That version had a bug with DHCP Client on the WAN Interface. I get Kernel > > Page Faults about 50% of the install will all later LiveCDs. I don't have > > specific errors, but I tried about 6 different Live CDs versions. I tried > > Bios tweaks (NO sound, NO power Management, NO USB), different memory (Ran > > Extensive memory tests),different HD,CDROM Drives, Use known good 3Com > > 3c905b > > from my Monowall PC. As a New Version comes out and fails to install, I > > try > > different things (place HD and CDROM Drive on the Same IDE Channel or > > delete > > the Partition with DELPART), the list goes on and on. I tried the install > > on > > a Toshiba 300mhz Celeron and I get ATA IDENTITY issues. > > > > Someone will probably suggest install that earlier version ( I believe it > > was > > 0.63) and do a manual update from there, but the way this product is > > evolving > > that idea probable will not work. I really like this firewall (been using > > Monowall since pb27) but I just cannot get this SOB to install. The > > feature I > > am waiting to see is DANSGUARDIAN WebFilter with Squid Transparent Proxy. > > > > I can post the specific errors that I receive if need be (no time to do it > > now) > > > > Thanks for this great Product, > > > > Bill > > > > -Original Message- > > From: David Strout [mailto:[EMAIL PROTECTED] > > Sent: Wednesday, August 10, 2005 12:59 PM > > To: support@pfsense.com > > Subject: [pfSense Support] ISO problems ... still > > > > Anyone, > > > > I have tried burning all of the version 0.73.x > > ISOs, and still the problem of when you launch the > > "/FreeSBIE/scripts/install.sh" script it hangs on > > the "Waiting for Backend" ANSI screen. > > Additionally, a couple of mesages pop up on the > > bottom of the screen ... xl0 link changed state to > > DOWN & xl0 link tate changed to UP. > > > > BTW ... xl0 is configured for the WAN interface on > > the ISO boot up and pre-config. > > > > I'm at a loss ... tried a few BIOS tweaks and > > nothing seems to help. I'm wondering if anyone > > else is experiencing the same symptoms. > > > > BTW2 ... tried two different PC's a Dell > > GX260 & a generic PC running an AMD Athelon 700Mhz > > > > I have had no problems w/ prior versions (0.68.x), > > but this issue crept up in/or about the 0.73.0 > > version. > > > > Any ideas ? > > > > -- > > David L. Strout > > Engineering Systems Plus, LLC > > > > > > > > > > - > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > - > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > - > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: [pfSense Support] ISO problems ... still
I am running Microsoft Virtual Server 2005 SP0 on Windows XP, so whatever virtual hardware it emulates is what I'm running :) Dimitri Rodis Integrita Systems LLC -Original Message- From: Kerry Schrantz [mailto:[EMAIL PROTECTED] Sent: Thursday, August 11, 2005 5:02 PM To: Scott Ullrich Cc: Dimitri Rodis; Wesley Joyce; support@pfsense.com Subject: Re: [pfSense Support] ISO problems ... still Ok, I can second Dimitri. Moving the CD from Secondary Master to Primary Slave did the trick for me as well. On both pfSense on DesktopBSD. Haven't done FreeBSD or PCBSD yet but this looks promising. Dimitri, what hardware are you running? I'm... MSI K7T Pro2 Duron 1.2 256 - PC2700 Maxtor 6L040J2 (40Gig) ATI AIO Pro128 Samsung 52x CDROM On 8/11/05, Scott Ullrich <[EMAIL PROTECTED]> wrote: > On 8/11/05, Dimitri Rodis <[EMAIL PROTECTED]> wrote: > > Yup, that did it. > > > > All I did was move the CDROM from Secondary Master to Primary Slave > > and the install went right thru. This was on 0.73.8. > > Okay thanks. Let me see if this can help us narrow down the problem. > > Scott > > - > To unsubscribe, e-mail: [EMAIL PROTECTED] For additional > commands, e-mail: [EMAIL PROTECTED] > > - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: [pfSense Support] ISO problems ... still
That is a correct statement at this point. Today (Friday), I will test 0.75 with the CDROM on the secondary bus and post the results. > -Original Message- > From: Scott Ullrich [mailto:[EMAIL PROTECTED] > Sent: Thursday, August 11, 2005 6:02 PM > To: Wesley Joyce > Cc: support@pfsense.com > Subject: Re: [pfSense Support] ISO problems ... still > > On 8/11/05, Wesley Joyce <[EMAIL PROTECTED]> wrote: > > The workaround works. I haven't tried with the CDROM on the secondary > bus > > yet. > > So basically 0.75 does not fix the problem but the moving of the CDROM > to another bus does? > > Scott - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: [pfSense Support] ISO problems ... still
Any news on the issue with the installer? (Moving the CDROM to be on the same channel as the hard drive, etc.) Dimitri Rodis Integrita Systems LLC -Original Message- From: Scott Ullrich [mailto:[EMAIL PROTECTED] Sent: Thursday, August 11, 2005 3:05 PM To: Dimitri Rodis Cc: Wesley Joyce; support@pfsense.com Subject: Re: [pfSense Support] ISO problems ... still On 8/11/05, Dimitri Rodis <[EMAIL PROTECTED]> wrote: > Yup, that did it. > > All I did was move the CDROM from Secondary Master to Primary Slave > and the install went right thru. This was on 0.73.8. Okay thanks. Let me see if this can help us narrow down the problem. Scott - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] ISO problems ... still
Try the latest version that I posted last night. On 8/16/05, Dimitri Rodis <[EMAIL PROTECTED]> wrote: > Any news on the issue with the installer? (Moving the CDROM to be on the > same channel as the hard drive, etc.) > > > Dimitri Rodis > Integrita Systems LLC > > -Original Message- > From: Scott Ullrich [mailto:[EMAIL PROTECTED] > Sent: Thursday, August 11, 2005 3:05 PM > To: Dimitri Rodis > Cc: Wesley Joyce; support@pfsense.com > Subject: Re: [pfSense Support] ISO problems ... still > > On 8/11/05, Dimitri Rodis <[EMAIL PROTECTED]> wrote: > > Yup, that did it. > > > > All I did was move the CDROM from Secondary Master to Primary Slave > > and the install went right thru. This was on 0.73.8. > > Okay thanks. Let me see if this can help us narrow down the problem. > > Scott > - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: [pfSense Support] ISO problems ... still
Nope, still a no go unless the CDROM is on the same channel... Dimitri Rodis Integrita Systems LLC -Original Message- From: Scott Ullrich [mailto:[EMAIL PROTECTED] Sent: Tuesday, August 16, 2005 9:12 AM To: Dimitri Rodis Cc: Wesley Joyce; support@pfsense.com Subject: Re: [pfSense Support] ISO problems ... still Try the latest version that I posted last night. On 8/16/05, Dimitri Rodis <[EMAIL PROTECTED]> wrote: > Any news on the issue with the installer? (Moving the CDROM to be on > the same channel as the hard drive, etc.) > > > Dimitri Rodis > Integrita Systems LLC > > -Original Message- > From: Scott Ullrich [mailto:[EMAIL PROTECTED] > Sent: Thursday, August 11, 2005 3:05 PM > To: Dimitri Rodis > Cc: Wesley Joyce; support@pfsense.com > Subject: Re: [pfSense Support] ISO problems ... still > > On 8/11/05, Dimitri Rodis <[EMAIL PROTECTED]> wrote: > > Yup, that did it. > > > > All I did was move the CDROM from Secondary Master to Primary Slave > > and the install went right thru. This was on 0.73.8. > > Okay thanks. Let me see if this can help us narrow down the problem. > > Scott > - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: Re: [pfSense Support] ISO problems ... still
There is a SCSI PCI adapter in the GX260 but I have tried installing the ISO wo/ it installed ... saddly enough same results.--David L. StroutEngineering Systems Plus, LLC- Original Message -Subject: Re: [pfSense Support] ISO problems ... stillFrom: [EMAIL PROTECTED]To: [EMAIL PROTECTED]Date: 08-11-2005 2:59 pmWe're hot on the trail now.I bet your using SCSI?ScottOn 8/11/05, David Strout <[EMAIL PROTECTED]> wrote:> I did a little digging on the FreeBSD, FreeSBIE and DragonFLY sites and> found little or not relavant info, but I did ! a couple of Googles and found> some pertinant info ... seems there is some known issues w/ installing *BSDs> w/ the CD in a different IDE channel than the HDD that you are installing> to. There are also lots of hits on disabling the APM (Power Mgmt.) . I> have tried and tried to get the newest ISO (0.74.6) to work w/ many many> different hardware configurations, but to no avail !!!> > Naything I can do to contribute to getting this worked out let me know > I have a couple of test platforms to work w/ and a pretty outfitted lab at> my disposl to test in.> > I did notice that unless you install fresh from the ISO some of the fixes> don't apply correctly namely the delete icon on the "IPSec:SPD" page,> and also I noticed that the fix for the adding DHCP only fixed itself> (linking to the "edit static mapping" page) after up! grad! ing to 0.74.8> today.> > GREAT JOB / AWESOME PRODUCT ... how can I be of more assistance ???> > --> David L. Strout> Engineering Systems Plus, LLC> > > - Original Message -> Subject: Re: [pfSense Support] ISO problems ... still> From: [EMAIL PROTECTED]> To: [EMAIL PROTECTED]> Date: 08-11-2005 2:01 pm> > > We are working on this. Everyone please be patient. The installer> is a tricky piece to get right for such a broad range of hardware and> such.> > Scott> > > On 8/11/05, Wesley Joyce <[EMAIL PROTECTED]> wrote:> > I'm in the same boat as well on Dell GX 110's. I have fol! lowed the> 'upgrade> > solution' of installing 0.68.x and upgrading from there.> > > > > -----Original Message-> > > From: William Pflaumer [mailto:[EMAIL PROTECTED]> > > Sent: Thursday, August 11, 2005 7:11 AM> > > To: David Strout> > > Cc: support@pfsense.com> > > Subject: RE: [pfSense Support] ISO problems ... still> > >> > > David and List,> > > I,too have not been able to do a harddrive install on my Dell Dimension> > > XPS> > > R300 since V 0.63 or so.(Last version that the installer functioned> > > properly)>! > > That version had a bug with DHCP Client on the WAN Interface. I get> Kernel> > > Page Faults about 50% of the install will all later LiveCDs. I don't> have> > > speci! fic errors, but I tried about 6 different Live CDs versions. I> tried> > > > Bios tweaks (NO sound, NO power Management, NO USB), different memory> (Ran> > > Extensive memory tests),different HD,CDROM Drives, Use known good 3Com> > > 3c905b> > > from my Monowall PC. As a New Version comes out and fails to install, I> > > try> > > different things (place HD and CDROM Drive on the Same IDE Channel or> > > delete> > > the Partition with DELPART), the list goes on and on. I tried the> install> > > on> > > a Toshiba 300mhz Celeron and I get ATA IDENTITY issues.> > >! > > > Someone will probably suggest install that earlier version ( I believe> it> > > was> > > 0.63) and do a manual update from there, but the way this product is> > > evolving> > > that idea probable will not work. I really like this firewall (been> using> > > ! Monowall since pb27) but I just cannot get this SOB to install. The> > > feature I> > > am waiting to see is DANSGUARDIAN WebFilter with Squid Transparent> Proxy.> > >> > > I can post the specific errors that I receive if need be (no time to do> it> > > now)> > >> > > Thanks for this great Product,> > >> > > Bill> > >> > > -Original Message-> > > From: David Strout [mailto:[EMAIL PROTECTED]> > &! gt; Sent: Wednesday, August 10, 2005 12:59 PM> > > To: support@pfsense.com> > > Subject: [pfSense Support] ISO problems ... still> > >> > > Anyone,> > >> > > I have tried burning all of the version 0.73.x> > > ISOs, and still the problem of when you launch t! he> > > "/FreeSBIE/scripts/install.sh" s
Re: Re: [pfSense Support] ISO problems ... still
I just tried a fresh 0.74.6 install after pulling the AHA2940 SCSI adapter out same results. Hangs on the "Waiting for Backend" ANSI screen.--David L. StroutEngineering Systems Plus, LLC- Original Message -Subject: Re: [pfSense Support] ISO problems ... stillFrom: [EMAIL PROTECTED]To: [EMAIL PROTECTED]Date: 08-11-2005 2:54 pmAll, are you using SCSI by chance?ScottOn 8/11/05, Wesley Joyce <[EMAIL PROTECTED]> wrote:> I'm in the same boat as well on Dell GX 110's. I have followed the 'upgrade> solution' of installing 0.68.x and upgrading ! from there.> > > -Original Message-> > From: William Pflaumer [mailto:[EMAIL PROTECTED]> > Sent: Thursday, August 11, 2005 7:11 AM> > To: David Strout> > Cc: support@pfsense.com> > Subject: RE: [pfSense Support] ISO problems ... still> >> > David and List,> > I,too have not been able to do a harddrive install on my Dell Dimension> > XPS> > R300 since V 0.63 or so.(Last version that the installer functioned> > properly)> > That version had a bug with DHCP Client on the WAN Interface. I get Kernel> > Page Faults about 50% of the install will all later LiveCDs. I don't have> > specific errors, but I tried about 6 different Live CDs versions. I tried> > Bios tweaks (NO sound, NO power Management, NO USB), different memory (Ran> > Extensive memory tests),different HD,CDROM Drives, Use known good 3Com> > 3c905b> > from my Monowall PC. As a New Version comes out and fails to install, I> > try> > different things (place HD and CDROM Drive on the Same IDE Channel or> > delete> > the Partition with DELPART), the list goes on and on. I tried the install> > on> > a Toshiba 300mhz Celeron and I get ATA IDENTITY issues.> >> > Someone will probably suggest install that earlier version ( I believe it> > was> > 0.63) and do a manual update from there, but the way this product is> > evolving> > that idea probable will not work. I really like this firewall (been using> > Monowall since pb27) but I just cannot get this SOB to install. The&g! t; > feature I> > am waiting to see is DANSGUARDIAN WebFilter with Squid Transparent Proxy.> >> > I can post the specific errors that I receive if need be (no time to do it> > now)> >> > Thanks for this great Product,> >> > Bill> >> > -Original Message-> > From: David Strout [mailto:[EMAIL PROTECTED]> > Sent: Wednesday, August 10, 2005 12:59 PM> > To: support@pfsense.com> > Subject: [pfSense Support] ISO problems ... still> >> > Anyone,> >> > I have tried burning all of the version 0.73.x> > ISOs, and still the problem of when you launch the> > "/FreeSBIE/scripts/install.sh" script it hangs! on> > the "Waiting for Backend" ANSI screen.> > Additionally, a couple of mesages pop up on the> > bottom of the screen ... xl0 link changed state to> > DOWN & xl0 link tate changed to UP.> >> > BTW ... xl0 is configured for the WAN interface on> > the ISO boot up and pre-config.> >> > I'm at a loss ... tried a few BIOS tweaks and> > nothing seems to help. I'm wondering if anyone> > else is experiencing the same symptoms.> >> > BTW2 ... tried two different PC's a Dell> > GX260 & a generic PC running an AMD Athelon 700Mhz> >> > I have had no problems w/ prior versions (0.68.x),> > but this issue crept up in/or about the 0.73.0> > version.> >> > Any ideas ?> >> > --> > David L. Strout! > > Engineering Systems Plus, LLC> >> >> >> >> > -> > To unsubscribe, e-mail: [EMAIL PROTECTED]> > For additional commands, e-mail: [EMAIL PROTECTED]> >> >> > -> > To unsubscribe, e-mail: [EMAIL PROTECTED]> > For additional commands, e-mail: [EMAIL PROTECTED]> >> > > > -> To unsubscribe, e-mail: [EMAIL PROTECTED]> For additional commands, e-mail: [EMAIL PROTECTED]> >-To unsubscribe, e-mail: [EMAIL PROTECTED]For additional commands, e-mail: [EMAIL PROTECTED]
Re: Re: [pfSense Support] ISO problems ... still
Try running: /usr/local/bin/lua50c51 /usr/local/share/dfuibe_lua/main.lua \ dir.root=/FreeSBIE/ \ option.booted_from_install_media=true ... From a shell prompt. Do you get a lua error? Scott On 8/11/05, David Strout <[EMAIL PROTECTED]> wrote: > I just tried a fresh 0.74.6 install after pulling the AHA2940 SCSI adapter > out same results. Hangs on the "Waiting for Backend" ANSI screen. > -- > David L. Strout > Engineering Systems Plus, LLC > > > - Original Message ----- > Subject: Re: [pfSense Support] ISO problems ... still > From: [EMAIL PROTECTED] > To: [EMAIL PROTECTED] > Date: 08-11-2005 2:54 pm > > > All, are you using SCSI by chance? > > Scott > > > On 8/11/05, Wesley Joyce <[EMAIL PROTECTED]> wrote: > > I'm in the same boat as well on Dell GX 110's. I have followed the > 'upgrade > > solution' of installing 0.68.x and upgrading ! from there. > > > > > -Original Message- > > > From: William Pflaumer [mailto:[EMAIL PROTECTED] > > > Sent: Thursday, August 11, 2005 7:11 AM > > > To: David Strout > > > Cc: support@pfsense.com > > > Subject: RE: [pfSense Support] ISO problems ... still > > > > > > David and List, > > > I,too have not been able to do a harddrive install on my Dell Dimension > > > XPS > > > R300 since V 0.63 or so.(Last version that the installer functioned > > > properly) > > > That version had a bug with DHCP Client on the WAN Interface. I get > Kernel > > > Page Faults about 50% of the install will all later LiveCDs. I don't > have > > > specific errors, but I tried about 6 different Live CDs versions. I > tried > > > Bios tweaks (NO sound, NO power Management, NO USB), different memory > (Ran > > > Extensive memory tests),different HD,CDROM Drives, Use known good 3Com > > > 3c905b > > > from my Monowall PC. As a New Version comes out and fails to install, I > > > try > > > different things (place HD and CDROM Drive on the Same IDE Channel or > > > delete > > > the Partition with DELPART), the list goes on and on. I tried the > install > > > on > > > a Toshiba 300mhz Celeron and I get ATA IDENTITY issues. > > > > > > Someone will probably suggest install that earlier version ( I believe > it > > > was > > > 0.63) and do a manual update from there, but the way this product is > > > evolving > > > that idea probable will not work. I really like this firewall (been > using > > > Monowall since pb27) but I just cannot get this SOB to install. The > &g! t; > feature I > > > > am waiting to see is DANSGUARDIAN WebFilter with Squid Transparent > Proxy. > > > > > > I can post the specific errors that I receive if need be (no time to do > it > > > now) > > > > > > Thanks for this great Product, > > > > > > Bill > > > > > > -Original Message- > > > From: David Strout [mailto:[EMAIL PROTECTED] > > > Sent: Wednesday, August 10, 2005 12:59 PM > > > To: support@pfsense.com > > > Subject: [pfSense Support] ISO problems ... still > > > > > > Anyone, > > > > > > I have tried burning all of the version 0.73.x > > > ISOs, and still the problem of when you launch the > > > "/FreeSBIE/scripts/install.sh" script it hangs! on > > > the "Waiting for Backend" ANSI screen. > > > Additionally, a couple of mesages pop up on the > > > bottom of the screen ... xl0 link changed state to > > > DOWN & xl0 link tate changed to UP. > > > > > > BTW ... xl0 is configured for the WAN interface on > > > the ISO boot up and pre-config. > > > > > > I'm at a loss ... tried a few BIOS tweaks and > > > nothing seems to help. I'm wondering if anyone > > > else is experiencing the same symptoms. > > > > > > BTW2 ... tried two different PC's a Dell > > > GX260 & a generic PC running an AMD Athelon 700Mhz > > > > > > I have had no problems w/ prior versions (0.68.x), > > > but this issue crept up in/or about the 0.73.0 > > > version. > > > > > > Any ideas ? > > > > > > -- > > > David L. Strout! > > > Engineering Systems Plus, LLC > > > > > > > > > > > > > > > > - > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > - > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > > > - > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > - > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[pfSense Support] ISO problems ... still on 0.75
I can't say the same here ..I've tried the following ..pri master = 10GB HDDpri slave = emptysec master = emptysec slave = Samsung CD-ROMNOT WORKING !! Still hangs on the "Waiting for Backend"Next I tried .pri master = 10GB HDDpri slave = emptysec master = Samsung CD-ROMsec slave = emptyNOT WORKING !! Same resultsLastly I tried .pri master = 10GB HDDpri slave = Samsung CD-ROMsec master & slave = emptyNOT WORKING !! Same results--David L. StroutEngineering Systems Plus, LLC- Original Message -----Subject: Re: [pfSense Support] ISO problems ... stillFrom: [EMAIL PROTECTED]To: [EMAIL PROTECTED]Date: 08-11-2005 8:02 pmOk, I can second Dimitri. Moving the CD from Secondary Master toPrimary Slave did the trick for me as well. On both pfSense onDesktopBSD. Haven't done FreeBSD or PCBSD yet but this lookspromising.Dimitri, what hardware are you running?I'm...MSI K7T Pro2Duron 1.2256 - PC2700Maxtor 6L040J2 (40Gig)ATI AIO Pro128Samsung 52x CDROMOn 8/11/05, Scott Ullrich <[EMAIL PROTECTED]> wrote:> On 8/11/05, Dimitri Rodis <[EMAIL PROTECTED]> wrote:> > Yup, that did it.> >> > All I did was move the CDROM from Secondary Master to Primary Slave and> > the install went right thru. This was on 0.73.8.> > Okay thanks. ! Let me see if this can help us narrow down the problem.> > Scott> > -> To unsubscribe, e-mail: [EMAIL PROTECTED]> For additional commands, e-mail: [EMAIL PROTECTED]> >-To unsubscribe, e-mail: [EMAIL PROTECTED]For additional commands, e-mail: [EMAIL PROTECTED]
Re: RE: [pfSense Support] ISO problems ... still
I found that the 0.76.4.iso still hangs ("Waiting for Backend" on ANSI screen) EVEN when the CD & HDD ARE on the same channel (ie: primary). I did successfully do an upgrade from 0.74.8 > 0.77 this morning and all went fine. I haven't seen a newer version of the iso (0.76.4 has been up on the mirrors for a couple of days now).--David L. StroutEngineering Systems Plus, LLC- Original Message -Subject: RE: [pfSense Support] ISO problems ... stillFrom: [EMAIL PROTECTED]To: [EMAIL PROTECTED]Date: 08-16-2005 9:28 pmNope, still a no go unless the CDROM is on the same channel..!
. Dimitri RodisIntegrita Systems LLC-Original Message-From: Scott Ullrich [mailto:[EMAIL PROTECTED] Sent: Tuesday, August 16, 2005 9:12 AMTo: Dimitri RodisCc: Wesley Joyce; support@pfsense.comSubject: Re: [pfSense Support] ISO problems ... stillTry the latest version that I posted last night.On 8/16/05, Dimitri Rodis <[EMAIL PROTECTED]> wrote:> Any news on the issue with the installer? (Moving the CDROM to be on > the same channel as the hard drive, etc.)> > > Dimitri Rodis> Integrita Systems LLC> > -Original Message-> From: Scott Ullrich [mailto:[EMAIL PROTECTED]> Sent: Thursday, August 11, 2005 3:05 PM> To: Dimitri Rodis>
Cc: Wesley Joyce; support@pfsense.com> Subject: Re: [pfSense Support] ISO problems ... still> > On 8/11/05, Dimitri Rodis <[EMAIL PROTECTED]> wrote:> > Yup, that did it.> >> > All I did was move the CDROM from Secondary Master to Primary Slave > > and the install went right thru. This was on 0.73.8.> > Okay thanks. Let me see if this can help us narrow down the problem.> > Scott>-To unsubscribe, e-mail: [EMAIL PROTECTED] For additionalcommands, e-mail: [EMAIL PROTECTED]-To unsubscribe, e-mail: [EMAIL PROTECTED]For additional commands, e-mail: [EMAIL PROTECTED]
RE: [pfSense Support] ISO problems ... still on 0.75
You’re kidding right!? I was able to get it to work with your last scenario and 0.74.8. I will be trying 0.75 today (Friday) H.. how about trying a new IDE cable. From: David Strout [mailto:[EMAIL PROTECTED] Sent: Thursday, August 11, 2005 10:08 PM To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED]; support@pfsense.com Subject: [pfSense Support] ISO problems ... still on 0.75 I can't say the same here .. I've tried the following .. pri master = 10GB HDD pri slave = empty sec master = empty sec slave = Samsung CD-ROM NOT WORKING !! Still hangs on the "Waiting for Backend" Next I tried . pri master = 10GB HDD pri slave = empty sec master = Samsung CD-ROM sec slave = empty NOT WORKING !! Same results Lastly I tried . pri master = 10GB HDD pri slave = Samsung CD-ROM sec master & slave = empty NOT WORKING !! Same results -- David L. Strout Engineering Systems Plus, LLC - Original Message ----- Subject: Re: [pfSense Support] ISO problems ... still From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Date: 08-11-2005 8:02 pm Ok, I can second Dimitri. Moving the CD from Secondary Master to Primary Slave did the trick for me as well. On both pfSense on DesktopBSD. Haven't done FreeBSD or PCBSD yet but this looks promising. Dimitri, what hardware are you running? I'm... MSI K7T Pro2 Duron 1.2 256 - PC2700 Maxtor 6L040J2 (40Gig) ATI AIO Pro128 Samsung 52x CDROM On 8/11/05, Scott Ullrich <[EMAIL PROTECTED]> wrote: > On 8/11/05, Dimitri Rodis <[EMAIL PROTECTED]> wrote: > > Yup, that did it. > > > > All I did was move the CDROM from Secondary Master to Primary Slave and > > the install went right thru. This was on 0.73.8. > > Okay thanks. ! Let me see if this can help us narrow down the problem. > > Scott > > - > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] ISO problems ... still on 0.75
0.75.1 is making its way to a mirror near you to fix a Lua bug. Scott On 8/12/05, Wesley Joyce <[EMAIL PROTECTED]> wrote: > > > > You're kidding right!? I was able to get it to work with your last scenario > and 0.74.8. I will be trying 0.75 today (Friday) > > > > H.. how about trying a new IDE cable. > > > > > > > > From: David Strout [mailto:[EMAIL PROTECTED] > Sent: Thursday, August 11, 2005 10:08 PM > To: [EMAIL PROTECTED]; [EMAIL PROTECTED] > Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED]; support@pfsense.com > Subject: [pfSense Support] ISO problems ... still on 0.75 > > > > > I can't say the same here .. > I've tried the following .. > > pri master = 10GB HDD > pri slave = empty > sec master = empty > sec slave = Samsung CD-ROM > > NOT WORKING !! Still hangs on the "Waiting for Backend" > > Next I tried . > pri master = 10GB HDD > pri slave = empty > sec master = Samsung CD-ROM > sec slave = empty > > NOT WORKING !! Same results > > Lastly I tried . > pri master = 10GB HDD > pri slave = Samsung CD-ROM > sec master & slave = empty > > NOT WORKING !! Same results > > > -- > David L. Strout > Engineering Systems Plus, LLC > > > > > > - Original Message - > Subject: Re: [pfSense Support] ISO problems ... still > From: [EMAIL PROTECTED] > To: [EMAIL PROTECTED] > Date: 08-11-2005 8:02 pm > > > Ok, I can second Dimitri. Moving the CD from Secondary Master to > Primary Slave did the trick for me as well. On both pfSense on > DesktopBSD. Haven't done FreeBSD or PCBSD yet but this looks > promising. > > Dimitri, what hardware are you running? > > I'm... > MSI K7T Pro2 > Duron 1.2 > 256 - PC2700 > Maxtor 6L040J2 (40Gig) > ATI AIO Pro128 > Samsung 52x CDROM > > On 8/11/05, Scott Ullrich <[EMAIL PROTECTED]> wrote: > > On 8/11/05, Dimitri Rodis <[EMAIL PROTECTED]> wrote: > > > Yup, that did it. > > > > > > All I did was move the CDROM from Secondary Master to Primary Slave and > > > the install went right thru. This was on 0.73.8. > > > > Okay thanks. ! Let me see if this can help us narrow down the problem. > > > > Scott > > > > > - > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > - > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] ISO problems ... still on 0.75
David Strout wrote: I can't say the same here .. I've tried the following .. pri master = 10GB HDD pri slave = empty sec master = empty sec slave = Samsung CD-ROM NOT WORKING !! Still hangs on the "Waiting for Backend" Next I tried . pri master = 10GB HDD pri slave = empty sec master = Samsung CD-ROM sec slave = empty NOT WORKING !! Same results Lastly I tried . pri master = 10GB HDD pri slave = Samsung CD-ROM sec master & slave = empty NOT WORKING !! Same results I have vague recollections of having to disable ACPI on to get some installs to work. (On a Dell I think!) Maybe that is worth trying as well. -- Scott Muller [EMAIL PROTECTED] Senior Communications Consultant Mobile : +61 (0)4388 300 82 NetCommplete Pty Ltd Phone : +61 (0)2 6331 4773 http://www.netcommplete.com.au Fax: +61 (0)2 6331 4909 - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] ISO problems ... still on 0.75
On 8/12/05, Scott Muller <[EMAIL PROTECTED]> wrote: > I have vague recollections of having to disable ACPI on to get some > installs to work. (On a Dell I think!) Maybe that is worth trying as well. See http://wiki.pfsense.com/wikka.php?wakka=BootOptions for more info on disabling ACPI. Scott - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: [pfSense Support] ISO problems ... still on 0.75 / 0.75.1 iso version error?
I am now only getting as far as 63% during the install when the CDROM is on the secondary bus. This is using pfSense-LiveCD-0.75.1 which for some strange reason still boots and display 0.75 as the version. Should I download this from a different mirror? > -Original Message- > From: Scott Ullrich [mailto:[EMAIL PROTECTED] > Sent: Friday, August 12, 2005 12:27 AM > To: Wesley Joyce > Cc: David Strout; support@pfsense.com > Subject: Re: [pfSense Support] ISO problems ... still on 0.75 > > 0.75.1 is making its way to a mirror near you to fix a Lua bug. > > Scott > > > On 8/12/05, Wesley Joyce <[EMAIL PROTECTED]> wrote: > > > > > > > > You're kidding right!? I was able to get it to work with your last > scenario > > and 0.74.8. I will be trying 0.75 today (Friday) > > > > > > > > H.. how about trying a new IDE cable. > > > > > > > > > > > > > > > > From: David Strout [mailto:[EMAIL PROTECTED] > > Sent: Thursday, August 11, 2005 10:08 PM > > To: [EMAIL PROTECTED]; [EMAIL PROTECTED] > > Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED]; support@pfsense.com > > Subject: [pfSense Support] ISO problems ... still on 0.75 > > > > > > > > > > I can't say the same here .. > > I've tried the following .. > > > > pri master = 10GB HDD > > pri slave = empty > > sec master = empty > > sec slave = Samsung CD-ROM > > > > NOT WORKING !! Still hangs on the "Waiting for Backend" > > > > Next I tried . > > pri master = 10GB HDD > > pri slave = empty > > sec master = Samsung CD-ROM > > sec slave = empty > > > > NOT WORKING !! Same results > > > > Lastly I tried . > > pri master = 10GB HDD > > pri slave = Samsung CD-ROM > > sec master & slave = empty > > > > NOT WORKING !! Same results > > > > > > -- > > David L. Strout > > Engineering Systems Plus, LLC > > > > > > > > > > > > - Original Message - > > Subject: Re: [pfSense Support] ISO problems ... still > > From: [EMAIL PROTECTED] > > To: [EMAIL PROTECTED] > > Date: 08-11-2005 8:02 pm > > > > > > Ok, I can second Dimitri. Moving the CD from Secondary Master to > > Primary Slave did the trick for me as well. On both pfSense on > > DesktopBSD. Haven't done FreeBSD or PCBSD yet but this looks > > promising. > > > > Dimitri, what hardware are you running? > > > > I'm... > > MSI K7T Pro2 > > Duron 1.2 > > 256 - PC2700 > > Maxtor 6L040J2 (40Gig) > > ATI AIO Pro128 > > Samsung 52x CDROM > > > > On 8/11/05, Scott Ullrich <[EMAIL PROTECTED]> wrote: > > > On 8/11/05, Dimitri Rodis <[EMAIL PROTECTED]> wrote: > > > > Yup, that did it. > > > > > > > > All I did was move the CDROM from Secondary Master to Primary Slave > and > > > > the install went right thru. This was on 0.73.8. > > > > > > Okay thanks. ! Let me see if this can help us narrow down the > problem. > > > > > > Scott > > > > > > > > - > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > - > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > - > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] ISO problems ... still on 0.75 / 0.75.1 iso version error?
On 8/12/05, Wesley Joyce <[EMAIL PROTECTED]> wrote: > I am now only getting as far as 63% during the install when the CDROM is on > the secondary bus. This is using pfSense-LiveCD-0.75.1 which for some > strange reason still boots and display 0.75 as the version. Should I > download this from a different mirror? It was only a installer fix so I didnt bump the system version. That is normal. What do you mean getting as far as 63%? What happens? - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: [pfSense Support] ISO problems ... still on 0.75 / 0.75.1 iso version error?
During the cpdup command processing after the partitioning, formatting, it faults at the 63% progress indicator during the installation. > -Original Message- > From: Scott Ullrich [mailto:[EMAIL PROTECTED] > Sent: Friday, August 12, 2005 11:02 AM > To: Wesley Joyce > Cc: support@pfsense.com > Subject: Re: [pfSense Support] ISO problems ... still on 0.75 / 0.75.1 iso > version error? > > On 8/12/05, Wesley Joyce <[EMAIL PROTECTED]> wrote: > > I am now only getting as far as 63% during the install when the CDROM is > on > > the secondary bus. This is using pfSense-LiveCD-0.75.1 which for some > > strange reason still boots and display 0.75 as the version. Should I > > download this from a different mirror? > > It was only a installer fix so I didnt bump the system version. That is > normal. > > What do you mean getting as far as 63%? What happens? - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] ISO problems ... still on 0.75 / 0.75.1 iso version error?
Again, I need more info. What faults? FreeBSD? The backend? The installer front end? Scott -- Forwarded message -- From: Wesley Joyce <[EMAIL PROTECTED]> Date: Aug 12, 2005 12:07 PM Subject: RE: [pfSense Support] ISO problems ... still on 0.75 / 0.75.1 iso version error? To: Scott Ullrich <[EMAIL PROTECTED]> Cc: support@pfsense.com During the cpdup command processing after the partitioning, formatting, it faults at the 63% progress indicator during the installation. > -Original Message- > From: Scott Ullrich [mailto:[EMAIL PROTECTED] > Sent: Friday, August 12, 2005 11:02 AM > To: Wesley Joyce > Cc: support@pfsense.com > Subject: Re: [pfSense Support] ISO problems ... still on 0.75 / 0.75.1 iso > version error? > > On 8/12/05, Wesley Joyce <[EMAIL PROTECTED]> wrote: > > I am now only getting as far as 63% during the install when the CDROM is > on > > the secondary bus. This is using pfSense-LiveCD-0.75.1 which for some > > strange reason still boots and display 0.75 as the version. Should I > > download this from a different mirror? > > It was only a installer fix so I didnt bump the system version. That is > normal. > > What do you mean getting as far as 63%? What happens? - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
