[SlimDevices: Touch] Further Dim Display on 'When Off' Screensaver
Hi Guys, I'm trying to work out if there is a way to set the screensaver to be minimum brightness when on the 'off' screensaver however have a different minimum brightness whilst is been used? -- smithkyle1992 smithkyle1992's Profile: http://forums.slimdevices.com/member.php?userid=44306 View this thread: http://forums.slimdevices.com/showthread.php?t=85836 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Any Hardware/Memory Diagnostics available?
It just happened again. This time I just powered up a SB Radio and then
tried to play a stream directly on the Touch. Here's a snippet of the
log at the time of the hang. Any idea how I can get this in front of
the right person who can decode the entries? Is there enough here to
file a bug?
Feb 21 21:14:06 squeezeplay: WARN applet.AlarmSnooze -
AlarmSnoozeApplet.lua:307 notify_playerModeChange: player (LocalPlayer
{Squeezebox Touch}) mode has been changed to play
Feb 21 21:14:06 squeezeplay: WARN applet.AlarmSnooze -
AlarmSnoozeApplet.lua:312 notify_playerModeChange: - audioState is 0
Feb 21 21:14:08 squeezeplay: INFO audio.decode - Playback.lua:443
connect 208.80.52.236:80 GET /WXRTFMAACCMP3 HTTP/1.0^M
Feb 21 21:14:08 squeezeplay: INFO audio.decode - Playback.lua:446 GET
/WXRTFMAACCMP3 HTTP/1.0^M
Feb 21 21:14:08 squeezeplay: Cache-Control: no-cache^M
Feb 21 21:14:08 squeezeplay: Connection: close^M
Feb 21 21:14:08 squeezeplay: Accept: */*^M
Feb 21 21:14:08 squeezeplay: Host: 3363.live.streamtheworld.com^M
Feb 21 21:14:08 squeezeplay: User-Agent: iTunes/4.7.1 (Linux; N;
SqueezeOS; arm-linux-gnueabi; EN; utf8) SqueezeCenter, Squeezebox
Server/7.5.3/31714^M
Feb 21 21:14:08 squeezeplay: Icy-Metadata: 1^M
Feb 21 21:14:08 squeezeplay: ^M
Feb 21 21:14:08 squeezeplay: INFO audio.decode -
decode_start_handler:278 init decoder aac
Feb 21 21:14:18 squeezeplay: INFO squeezeplay.applets -
AppletManager.lua:708 store settings: Playback
Feb 21 21:15:06 squeezeplay: WARN net.thread - NetworkThread.lua:146
network thread timeout for Task(SocketTcp {SlimProto}(R))
Feb 21 21:15:06 squeezeplay: INFO net.slimproto - SlimProto.lua:756
connection error: inactivity timeout, reconnecting in 2.528 seconds
Feb 21 21:15:06 squeezeplay: WARN net.thread - NetworkThread.lua:146
network thread timeout for Task(SocketHttp {Squeezebox Touch
(USB)_Request}(R))
Feb 21 21:15:08 squeezeplay: INFO net.slimproto - SlimProto.lua:579
connect to 192.168.1.106 (192.168.1.106)
Feb 21 21:15:08 squeezeplay: INFO net.slimproto - SlimProto.lua:137
Send HELO: reconnect-bit=true bytesReceived(H,L)=0,579812
Feb 21 21:15:39 squeezeplay: WARN net.thread - NetworkThread.lua:146
network thread timeout for Task(SocketHttp {Squeezebox Touch
(USB)_Chunked}(R))
Feb 21 21:15:39 squeezeplay: ERROR net.http - SocketHttp.lua:803
SocketHttp {Squeezebox Touch (USB)_Chunked}:t_rcvResponse.pump()
error:inactivity timeout
Feb 21 21:15:39 squeezeplay: stack traceback:
Feb 21 21:15:39 squeezeplay:
/usr/share/jive/jive/net/SocketHttp.lua:803: in function 'pump'
Feb 21 21:15:39 squeezeplay:
/usr/share/jive/jive/net/SocketTcp.lua:192: in function 'readPump'
Feb 21 21:15:39 squeezeplay:/usr/share/jive/jive/net/Socket.lua:161:
in function
Feb 21 21:15:39 squeezeplay: INFO net.comet - Comet.lua:804 Comet
{Squeezebox Touch (USB)}: _getEventSink error: inactivity timeout
Feb 21 21:15:39 squeezeplay: INFO net.comet - Comet.lua:997 Comet
{Squeezebox Touch (USB)}: handleAdvice state=CONNECTED
Feb 21 21:15:39 squeezeplay: INFO squeezebox.server -
SlimServer.lua:734 disconnected Squeezebox Touch (USB)
idleTimeoutTriggered: nil
Feb 21 21:15:39 squeezeplay: INFO applet.AlarmSnooze -
AlarmSnoozeApplet.lua:367 notify_serverDisconnected: SlimServer
{Squeezebox Touch (USB)} is now disconnected
Feb 21 21:15:39 squeezeplay: WARN applet.AlarmSnooze -
AlarmSnoozeApplet.lua:380 notify_serverDisconnected: SlimServer
{Squeezebox Touch (USB)} - disconnected, but no server alarm in
progress : nil
Feb 21 21:15:39 squeezeplay: INFO net.comet - Comet.lua:1038 Comet
{Squeezebox Touch (USB)}: advice is retry, connect in 2.015 seconds
Feb 21 21:15:39 squeezeplay: INFO squeezebox.server -
SlimServer.lua:710 connected mysqueezebox.com
Feb 21 21:15:39 squeezeplay: INFO applet.AlarmSnooze -
AlarmSnoozeApplet.lua:348 notify_serverConnected: SlimServer
{mysqueezebox.com} is now connected
Feb 21 21:15:39 squeezeplay: INFO applet.AlarmSnooze -
AlarmSnoozeApplet.lua:351 local player connection status is false
Feb 21 21:15:39 squeezeplay: INFO squeezebox.server -
SlimServer.lua:722 self.mac being set to>nil
Feb 21 21:15:39 squeezeplay: INFO squeezebox.server -
SlimServer.lua:332 mysqueezebox.com
firmware=http://update.slimdevices.com/update/firmware/7.5.3/fab4_7.5.3_r9283.bin
force=false
Feb 21 21:15:39 squeezeplay: INFO applet.SlimMenus -
SlimMenusApplet.lua:441 _menuSink(23) SlimServer {mysqueezebox.com}
menuDirective: nil isCurrentServer:nil
Feb 21 21:15:43 squeezeplay: WARN net.thread - NetworkThread.lua:146
network thread timeout for Task(SocketTcp {SlimProto}(R))
Feb 21 21:15:43 squeezeplay: INFO net.slimproto - SlimProto.lua:756
connection error: inactivity timeout, reconnecting in 2.084 seconds
Feb 21 21:15:45 squeezeplay: INFO net.slimproto - SlimProto.lua:579
connect to 192.168.1.106 (192.168.1.106)
Feb 21 21:15:45 squeezeplay: INFO net.slimproto - SlimProto.lua:137
Send HELO: reconnect-bit=true bytesReceived(H,L)=0,877505
Fe
[SlimDevices: Touch] Stream won't play: rtsp://129.65.35.106:8000/stream.sdp
Hi all, Trying to play this radio station stream from a local radio station- but they warn on their site that not all players can play the stream as it's AAC/MP4, presumably better fidelity. The three options they give is a QuickTime QTL stream, a RealPlayer RAM stream and the above. No luck so far in getting any of them to work. Is there a workaround that would allow me to get this station or is an AAC/MP4 stream something that Logitech is going to have to implement at the website? Thanks for any help! Tom -- thomasharris thomasharris's Profile: http://forums.slimdevices.com/member.php?userid=44262 View this thread: http://forums.slimdevices.com/showthread.php?t=85835 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Suddenly, no music from Touch
ralphpnj;612616 Wrote: > Next time this happens (which I hope is never) try just turning the > Touch on and off, if you haven't tried that already. I'll keep that in mind. Thanks for the suggestion. Guido F. -- guidof *Front End*: Marantz TT 15S1 Turntable, Virtuoso Wood Cartridge; Cambridge Azur 840C CD Player; Oppo BDP--83 Universal Player; Squeezebox Touch Music File Player (digital out to Cambridge Azur 840C DAC) *Preamps*: Conrad Johnson Motif (Phono); Adcom GFP-750 (Line) *Amps*: Music Reference RM-200 Mk II (Main); Little Tube Mk III (Phones) *Subwoofer Equalizer*: DSpeaker Antimode 8033 *Speakers*: Martin Logan SL3s; REL T1 Subwoofer *Headphones*: AKG K701 guidof's Profile: http://forums.slimdevices.com/member.php?userid=40448 View this thread: http://forums.slimdevices.com/showthread.php?t=85806 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Instructions for connecting USB DAC to Touch
JohnSwenson;612898 Wrote: > Try using card 1, frequently there are problems using the names. > > T file you have is using the plug interface, this should work no matter > what, but at least with several async interfaces it causes ticks and > pops. At least with the HRT music streamers I had to switch over to the > HW interface which gets rid of the ticks and pops, BUT you have to feed > it in exactly the format it accepts, otherwise it doesn't boot. > > A primary issue is the bits per sample, in the poast several back I > show how to change that to 32. Try 16, 24 and 32. Unfortunately there > are several different 24 bit formats, I haven't figured out yet how to > get squeezeplay to change between formats. I THINK that might be some > of the problems. > > John S. Thanks John! Tried that and get the same error, in boots ao I can login . but does not start up everything and the displays show the "Free your music" screen. Think I should be able to use aplay to test the interface itselt but I get the following: aplay -D hw:1,0 /usr/share/jive/applets/SetupSoundEffects/sounds/docking.wav Playing WAVE '/usr/share/jive/applets/SetupSoundEffects/sounds/docking.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Mono aplay: set_params:961: Sample format non available Cheers Johan Cheers Johan -- johann johann's Profile: http://forums.slimdevices.com/member.php?userid=10177 View this thread: http://forums.slimdevices.com/showthread.php?t=82110 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Numptie Appeal for Help Please
garym;612891 Wrote: > OK. All good. .. > ...before you do the factory reset, see if there is a menu item in > TOUCH. SETTINGS > ADVANCED > NETWORKING (maybe here you can switch to > ethernet) Hi Gary, The above is exactly how I have been trying (and failing) to get the ethernet connection. FWIW when I have done the Factory Resets (many, many times) I have never disconnected before, and reconnected after, the Factory Reset - don't know whether that would make any difference. Dave. -- DaveKen DaveKen's Profile: http://forums.slimdevices.com/member.php?userid=34139 View this thread: http://forums.slimdevices.com/showthread.php?t=85697 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Print List of all my Albums?
Mnyb;612715 Wrote: > album view on iPeng on my iPad . > > And i use random regurlarly. > > I also use random song as an alarm with my boom, this could induce > heart attacks but it is always a surprise. > > Or use album catalog creator 3, never used it but it has been around > the forum a while > > http://forums.slimdevices.com/showthread.php?t=74452&highlight=Album+catalog I have iPenf on my iPhone. Mmmh. Do we have album view in iPeng? Must check. I had a look at Album Catalog Creator. Looks promising but the thread stopped in December last year and not sure if it's still supported. Rgds Patrick -- souwalker souwalker's Profile: http://forums.slimdevices.com/member.php?userid=37673 View this thread: http://forums.slimdevices.com/showthread.php?t=85819 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Instructions for connecting USB DAC to Touch
johann;612553 Wrote:
> The contents of my /etc/asound.conf is:
>
> # more /etc/asound.conf
> pcm.usbdac {
> type hw;
> card DAC;
> }
> pcm.plugusb {
> type plug;
> slave.pcm "usbdac";
> }
> ctl.plugusb {
> type hw;
> card DAC;
> }
>
> pcm.!default plugusb
>
> Cheers
> Johan
Try using card 1, frequently there are problems using the names.
T file you have is using the plug interface, this should work no matter
what, but at least with several async interfaces it causes ticks and
pops. At least with the HRT music streamers I had to switch over to the
HW interface which gets rid of the ticks and pops, BUT you have to feed
it in exactly the format it accepts, otherwise it doesn't boot.
A primary issue is the bits per sample, in the poast several back I
show how to change that to 32. Try 16, 24 and 32. Unfortunately there
are several different 24 bit formats, I haven't figured out yet how to
get squeezeplay to change between formats. I THINK that might be some
of the problems.
John S.
--
JohnSwenson
JohnSwenson's Profile: http://forums.slimdevices.com/member.php?userid=5974
View this thread: http://forums.slimdevices.com/showthread.php?t=82110
___
Touch mailing list
Touch@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Numptie Appeal for Help Please
DaveKen;612890 Wrote: > Hi Gary, > ATM I have a Netgear 834G Modem Router as the first 'stop' on my > incoming ADSL path. As you may know this has both wired and wireless > capability. I have 3 x Cat 5e cable connections going to various rooms > in the house and one Cat 5e cable going into the workstation > immediately at the side of this 834G. One room cable is unused > (currently no components in that room), one > goes into the room where the laptop is situated, into a 'plumbed-in' > wall plate and I have the laptop permanently wire connected to this > outlet. FWIW the laptop is wireless enabled and the signal in that room > is reported a excellent so it is also connected wirelessly. > The last cable is routed into our lounge, which also serves as my main > listening room and our main TV viewing room. In this room we have the > following items all with RJ45 ethernet sockets and, because they are > available, I 'have' to have them connected: - > Logitech Touch, > Sky box (satellite TV facility), > Sony Blu-Ray player, > Vaio MM PC > So I have a 'cheapo' Tenda switch on the end of the cable incoming from > the 834G and the 4 above items are coupled to that using short lengths > of Cat 5e cable. In direct answer to your question the Touch is > ethernet coupled to the Tenda switch which in turn is ethernet coupled > to the 834G router. > Cheers, > Dave. OK. All good. I'm not at home, so just from memory, simply plugging the ethernet cable into your TOUCH is not enough to switch it over to ethernet. Try doing a factory reset on the TOUCH (a little button on the back just above where the powercord goes in). After the factory reset, plugin the eithernet cable to the TOUCH. Do NOT enter your wifi password on the TOUCH (we don't want it connecting to WIFI, only the ethernet). -- garym garym's Profile: http://forums.slimdevices.com/member.php?userid=17325 View this thread: http://forums.slimdevices.com/showthread.php?t=85697 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Numptie Appeal for Help Please
garym;612875 Wrote: > based on what you said, you have a single ROUTER attached to your modem, > and the router is handing out IP addresses via DHCP. This is ok. (I do > prefer to setup all my nonportable items with a fixed IP address, but > we can save that for later if needed). > > So it sounds like you now need to get your TOUCH back connected via > ethernet instead of Wifi. Where are you connecting your TOUCH via > ethernet. Directly to your ROUTER? Hi Gary, ATM I have a Netgear 834G Modem Router as the first 'stop' on my incoming ADSL path. As you may know this has both wired and wireless capability. I have 3 x Cat 5e cable connections going to various rooms in the house and one Cat 5e cable going into the workstation immediately at the side of this 834G. One room cable is unused (currently no components in that room), one goes into the room where the laptop is situated, into a 'plumbed-in' wall plate and I have the laptop permanently wire connected to this outlet. FWIW the laptop is wireless enabled and the signal in that room is reported a excellent so it is also connected wirelessly. The last cable is routed into our lounge, which also serves as my main listening room and our main TV viewing room. In this room we have the following items all with RJ45 ethernet sockets and, because they are available, I 'have' to have them connected: - Logitech Touch, Sky box (satellite TV facility), Sony Blu-Ray player, Vaio MM PC So I have a 'cheapo' Tenda switch on the end of the cable incoming from the 834G and the 4 above items are coupled to that using short lengths of Cat 5e cable. In direct answer to your question the Touch is ethernet coupled to the Tenda switch which in turn is ethernet coupled to the 834G router. Cheers, Dave. -- DaveKen DaveKen's Profile: http://forums.slimdevices.com/member.php?userid=34139 View this thread: http://forums.slimdevices.com/showthread.php?t=85697 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Numptie Appeal for Help Please
based on what you said, you have a single ROUTER attached to your modem, and the router is handing out IP addresses via DHCP. This is ok. (I do prefer to setup all my nonportable items with a fixed IP address, but we can save that for later if needed). So it sounds like you now need to get your TOUCH back connected via ethernet instead of Wifi. Where are you connecting your TOUCH via ethernet. Directly to your ROUTER? -- garym garym's Profile: http://forums.slimdevices.com/member.php?userid=17325 View this thread: http://forums.slimdevices.com/showthread.php?t=85697 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Any Hardware/Memory Diagnostics available?
I'm still being plagued by this issue. It happened again last night when I attempted to change from one favorite to another. The slimserver process was running at 80% again, so it is definitely some kind of hang. I need to determine if it is a hardware problem or a bug in the latest Touch server. I'm thinking hardware since no one else seems to be reporting this issue. It may be related or not, but I also had an issue where the clock was off by 5 minutes over 10 days. I went away on a business trip and when I returned I was surprised that the internal clock could be that inaccurate. 30 seconds a day seems like an awful lot. Perhaps this causes a problem with the OS? I'm just guessing at this point until I can find better tools to troubleshoot the issue. -- steve781 steve781's Profile: http://forums.slimdevices.com/member.php?userid=42824 View this thread: http://forums.slimdevices.com/showthread.php?t=85484 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Numptie Appeal for Help Please
Just wanted to second Toby10's comment, so forgive me if you already know this. Most routers 'out of the box' dynamically allocate IPs to devices as they attach. But that isn't the way it has to be. In your router's setup pages you'll have a way to allocate each device an IP. That is REALLY important on a squeezebox-equipped network and doing it will solve SOOO many potential issues down the road. The main problem happens when you reboot a conected device or the router, or the router's 'lease' to the device runs out (they usually only have a set time) and the router re-allocates a new IP to the device. Suddenly the squeezebox can't find the squeeze server, or the internet, or etc etc. Have a read of your router's config pages and learn how to allocate all your connected devices their own, fixed IP. Don't get confused with a fixed IP at your ISP - this is a fixed IP on your own network. Hope that makes sense! Mark -- asdti asdti's Profile: http://forums.slimdevices.com/member.php?userid=38467 View this thread: http://forums.slimdevices.com/showthread.php?t=85697 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Numptie Appeal for Help Please
garym;612774 Wrote: > Do you have a SINGLE router? How does the internet get to your house? > Cable? DSL. And do you have, for example, cable modem feeding a SINGLE > router. If you are getting IP conflicts, it may be because you have > more than one router on your network handing out IP addresses. Hi Gary, Thanks for your usual help. My internet service is ADSL, said to offer up to 20 Mbps ( by the telephone/internet service provider but not by me!). This is where it may start to get a little more complicated :-). Perhaps I did not explain myself very well previously - I USED to get the IP Address conflict message but I haven't had it for a while. I did for a brief period try to replace my 'G' type modem router with a cheap 'N' type router, using the 'G' type in place functioning only as a switch. My simple logic was that it might give me a bit more speed and a few more wired ports but I could never get it to function consistantly so I went back to square one - the IP Address problem may well have been related to this brief trial. Phil Leigh;612814 Wrote: > What do your iPhones connect wirelessly to? > > If you don't resolve your IP conflicts, you are in for a world of > pain. > On each PC you have, open a command prompt (run - cmd) and type > ipconfig... this will tell you how each machine is configured. Each > machine needs its own unique IP address, the same subnet and the same > default gateway. > See below Phil, unless I misunderstand you I find your question about what do my iPhones connect to rather strange but that is more of a criticism of me than it is of you :-). I have a simple home wired and wireless network and the iPhones connect to that,, what else is there? Regarding the Command Prompt, again this may be where it starts getting complicated. My Vaio MM PC is running Win7 Home Prem. but the other 3 (workstation, laptop and netbook are all running Win XP (fully updated with Service Packs etc.). The workstation is a wired connection only, the laptop is both wired and wireless and the netbook is wireless only. Running Command Prompt and ipconfig gives the following results on the items running XP: - All Default Gateways are 192.168.0.1 All Subnet Masks are 255.255.255.0 IP Address on workstation is 192.168.0.9 IP Address on laptop is 192.168.0.3 (ethernet) and 192.168.0.11 (wireless) IP Address on netbook is 192.168.0.6 Because the Vaio is running Win7 the answers are somewhat different: - Autoconfig IPv4 Address is 169.254.177.139 Subnet Mask is 255.255.0.0 Default Gateway is . (nothing other than a series of dots) Command Prompt also lists 4 Tunnel Adapters, (3 ISATAP and 1 Teredo Tunneling), none of which means anything to me but may, hopefully, mean something to you :-) Hopefully you can stick with me for a bit longer. TIA, Dave. -- DaveKen DaveKen's Profile: http://forums.slimdevices.com/member.php?userid=34139 View this thread: http://forums.slimdevices.com/showthread.php?t=85697 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Instructions for connecting USB DAC to Touch
Sorry if this is already covered: are the instructions on the original post still current? Anything else I should know about doing this hack? I'm computer literate but not programming adept. Planning on using my modified SB w/an asynchronous USB to S/PDIF converter into a Berkeley DAC. thx -- rblnr rblnr's Profile: http://forums.slimdevices.com/member.php?userid=4504 View this thread: http://forums.slimdevices.com/showthread.php?t=82110 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Haven't had this much fun since . . .
Phil Leigh;612226 Wrote: > These folks are almost certainly one diskette short of a full install... You mean floppy? -- magiccarpetride magiccarpetride's Profile: http://forums.slimdevices.com/member.php?userid=37863 View this thread: http://forums.slimdevices.com/showthread.php?t=85651 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Numptie Appeal for Help Please
What do your iPhones connect wirelessly to? If you don't resolve your IP conflicts, you are in for a world of pain. On each PC you have, open a command prompt (run - cmd) and type ipconfig... this will tell you how each machine is configured. Each machine needs its own unique IP address, the same subnet and the same default gateway. See below +---+ |Filename: CropperCapture[1].jpg| |Download: http://forums.slimdevices.com/attachment.php?attachmentid=11409| +---+ -- Phil Leigh You want to see the signal path BEFORE it gets onto a CD/vinyl...it ain't what you'd call minimal... Touch(wired/XP) - Audiolense 3.3/2.0+INGUZ DRC - MF x-dacv3/x-10/x-psu(Audiocom full mods) - Linn 5103 - full Aktiv 5.1 system (6x LK140's, ESPEK/TRIKAN/KATAN/SEIZMIK 10.5), Pekin Tuner, Townsend Supertweeters, Blue Jeans Belden Digital,Kimber 8TC Speaker & Chord Signature Plus Interconnect cables Stax4070+SRM7/II phones Kitchen Boom, Outdoors: SB Radio, Harmony One remote for everything. Phil Leigh's Profile: http://forums.slimdevices.com/member.php?userid=85 View this thread: http://forums.slimdevices.com/showthread.php?t=85697 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] My Album Art went poof!
rktdi;612787 Wrote: > haha fantastic - I downloaded the file via my Opera browser instead - > before i got a .zip file that unpacked into a new folder, with 4 > subfolders. With Opera I got a .bin file - and my Touch is updating > nicely now :-) > > i hope 7.6 is an improvement.. > > THANKS FOR ALL YOUR HELP WITH THIS - GREAT WORK GUYS that did the trick, I have had problems with my Touch only displaying half of my album covers - as far as i can see this is solved now! -- rktdi rktdi's Profile: http://forums.slimdevices.com/member.php?userid=43723 View this thread: http://forums.slimdevices.com/showthread.php?t=77652 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] My Album Art went poof!
kidstypike;612658 Wrote: > I think I see the problem. I've just downloaded the file using Internet > Explorer, and I get a .zip file, it should be a .bin file. Do you know > how to change the file extension from .zip to .bin ? Or you could try > downloading the file using another browser, I've just tried Google > Chrome, and it downloads the file no problem. haha fantastic - I downloaded the file via my Opera browser instead - before i got a .zip file that unpacked into a new folder, with 4 subfolders. With Opera I got a .bin file - and my Touch is updating nicely now :-) i hope 7.6 is an improvement.. THANKS FOR ALL YOUR HELP WITH THIS - GREAT WORK GUYS -- rktdi rktdi's Profile: http://forums.slimdevices.com/member.php?userid=43723 View this thread: http://forums.slimdevices.com/showthread.php?t=77652 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Numptie Appeal for Help Please
IP conflicts can be very intermittent but also very troublesome to your networked devices. This must be fixed to have a reliable network. -- toby10 toby10's Profile: http://forums.slimdevices.com/member.php?userid=12553 View this thread: http://forums.slimdevices.com/showthread.php?t=85697 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Newbie with Questions for the Experts
alexlark;612736 Wrote: > I've noticed that the SB Touch can be a bit fussy with the WIFI signal. > My signal was dropping to abot 30-40% and playback was getting > interupted (no other devices using WIFI). I set up another router in > the same room as the Touch, configured as an access point and wired > into the main router. My signal is now at the 70% mark and playback is > flawless :-) yes streaming audio demands continius wifi signal, so it's finicky . for web browsing you would never notice if connection comes in spurts like an empty ketchup bottle . If you have ethernet cable in the same room why not wire the Touch just split the cable with a switch and wire the Touch too ? -- Mnyb Main hifi: Touch + CIA PS +MeridianG68J MeridianHD621 MeridianG98DH 2 x MeridianDSP5200 MeridianDSP5200HC 2 xMeridianDSP3100 +Rel Stadium 3 sub. Bedroom/Office: Boom Kitchen: SB3 + powered Fostex PM0.4 Misc use: Radio (with battery) iPad 64gB wifi +3g with iPengHD & SqueezePad Mnyb's Profile: http://forums.slimdevices.com/member.php?userid=4143 View this thread: http://forums.slimdevices.com/showthread.php?t=83244 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Multi CD sets tagging help
alexlark;612739 Wrote: > For a twin CD, for example, do you number the discs 1 and 2 or 1/2 and > 2/2 ? > > I use the latter and could not get it to work correctly until I added > an extended tag called COMPILATION and set its value to 1. I did this > for all my multi disc sets and it worked. > > Just wondering if this is why it did not work for me. > > Alex As suggested, I use disknumber as 1, 2, etc. (not 1/2, 2/2). I have an option in dbpoweramp to do it either way on ripping. And compilation tag would only be present (and =1) on a true compiliation. So if I have a 3 disk grateful dead album, it is NOT a compilation. -- garym garym's Profile: http://forums.slimdevices.com/member.php?userid=17325 View this thread: http://forums.slimdevices.com/showthread.php?t=85791 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Numptie Appeal for Help Please
DaveKen;612767 Wrote: > Hi Gary, > Yep, it's fair to say that I've got eclectic tastes in music but you > won't find much post 70s pop in there!! And Yep, there is a fairly > close tie-up between foobar and SBS totals, but not exact. > At this point I am again about to expose my numptieness. I know just > about enough about PCs and networks to be dangerous and most of what I > know has been found from trial and error (the hard way ;-). For > background, my home network consists of MM PC, Workstation, Laptop and > Netbook and the Netbook and Workstation have USB printers attached to > them. We also have a number of wireless iPhones etc attached > wirelessly. Occassionally I get a message saying there is an IP Address > conflict on my network but it doesn't seem to adversely affect anything > AFAIK. > To get to the point, I cannot get my Touch to connect by ethernet now > (although it has done successfully in the past). It will connect > wirelessly but internet radio stations are intermittent due to frequent > pauses whilst it rebuffers. When it did connect by ethernet there was no > rebuffering. I have tried to enter the necessary information manually > with apparent success in that I get a message confirming the ethernet > connection but attempting to access Internet Radio results in a message > that it cannot connect to 'mysqueezebox.com'. > Can you tell me an idiot-proof way of identifying my IP Address > (192.168.0.6 ??), my Subnet Mask (255.255.255.0 ??), my Gateway IP > Address (192.168.0.1 ??), and my DNS Server IP Address (192.168.0 3 ??) > - the figures in brackets are the figures I enter to get connected but > with which it refuses to connect to 'mysqueezebox.com'. Basically I have > no idea what the DNS Server is - which item of kit does the first > requirement (IP Address) refer to, which is the DNS Server and how can > I find out what their IP Addresses are? > Sorry for the numptieness :-). > Dave. Do you have a SINGLE router? How does the internet get to your house? Cable? DSL. And do you have, for example, cable modem feeding a SINGLE router. If you are getting IP conflicts, it may be because you have more than one router on your network handing out IP addresses. -- garym garym's Profile: http://forums.slimdevices.com/member.php?userid=17325 View this thread: http://forums.slimdevices.com/showthread.php?t=85697 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Numptie Appeal for Help Please
garym;612690 Wrote: > You gotta love Tschaikovsky and Chuck Berry in the same list...Roll over > Beethoven! Not sure about the error, but it appears there are no actual > scanning errors, so you probably do have all your music now scanned > properly. I note the "foobar" in the directory. Do you also use > foobar2000 on the computer. I do as well, and I have foobar and SbS > pointed to the same music directory. This way I can compare totals > between the two programs and this is a good check on something getting > out of wack. Hi Gary, Yep, it's fair to say that I've got eclectic tastes in music but you won't find much post 70s pop in there!! And Yep, there is a fairly close tie-up between foobar and SBS totals, but not exact. At this point I am again about to expose my numptieness. I know just about enough about PCs and networks to be dangerous and most of what I know has been found from trial and error (the hard way ;-). For background, my home network consists of MM PC, Workstation, Laptop and Netbook and the Netbook and Workstation have USB printers attached to them. We also have a number of wireless iPhones etc attached wirelessly. Occassionally I get a message saying there is an IP Address conflict on my network but it doesn't seem to adversely affect anything AFAIK. To get to the point, I cannot get my Touch to connect by ethernet now (although it has done successfully in the past). It will connect wirelessly but internet radio stations are intermittent due to frequent pauses whilst it rebuffers. When it did connect by ethernet there was no rebuffering. I have tried to enter the necessary information manually with apparent success in that I get a message confirming the ethernet connection but attempting to access Internet Radio results in a message that it cannot connect to 'mysqueezebox.com'. Can you tell me an idiot-proof way of identifying my IP Address (192.168.0.6 ??), my Subnet Mask (255.255.255.0 ??), my Gateway IP Address (192.168.0.1 ??), and my DNS Server IP Address (192.168.0 3 ??) - the figures in brackets are the figures I enter to get connected but with which it refuses to connect to 'mysqueezebox.com'. Basically I have no idea what the DNS Server is - which item of kit does the first requirement (IP Address) refer to, which is the DNS Server and how can I find out what their IP Addresses are? Sorry for the numptieness :-). Dave. -- DaveKen DaveKen's Profile: http://forums.slimdevices.com/member.php?userid=34139 View this thread: http://forums.slimdevices.com/showthread.php?t=85697 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Multi CD sets tagging help
JJZolx;612745 Wrote: > I would not use 1/2, 2/2. Set DISC or DISCNUMBER to 1, 2, etc. For > multidisc COMPILATIONS you must set COMPILATION=1. That's just a small > bug of Squeezebox Server. +1, but as Jim says you only set the COMPILATION tag to 1 on actual compilations/multi-artist sets, not on multi-disc sets by the same artist! -- Phil Leigh You want to see the signal path BEFORE it gets onto a CD/vinyl...it ain't what you'd call minimal... Touch(wired/XP) - Audiolense 3.3/2.0+INGUZ DRC - MF x-dacv3/x-10/x-psu(Audiocom full mods) - Linn 5103 - full Aktiv 5.1 system (6x LK140's, ESPEK/TRIKAN/KATAN/SEIZMIK 10.5), Pekin Tuner, Townsend Supertweeters, Blue Jeans Belden Digital,Kimber 8TC Speaker & Chord Signature Plus Interconnect cables Stax4070+SRM7/II phones Kitchen Boom, Outdoors: SB Radio, Harmony One remote for everything. Phil Leigh's Profile: http://forums.slimdevices.com/member.php?userid=85 View this thread: http://forums.slimdevices.com/showthread.php?t=85791 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Multi CD sets tagging help
alexlark;612739 Wrote: > For a twin CD, for example, do you number the discs 1 and 2 or 1/2 and > 2/2 ? > > I use the latter and could not get it to work correctly until I added > an extended tag called COMPILATION and set its value to 1. I did this > for all my multi disc sets and it worked. > > Just wondering if this is why it did not work for me. I would not use 1/2, 2/2. Set DISC or DISCNUMBER to 1, 2, etc. For multidisc COMPILATIONS you must set COMPILATION=1. That's just a small bug of Squeezebox Server. -- JJZolx JJZolx's Profile: http://forums.slimdevices.com/member.php?userid=10 View this thread: http://forums.slimdevices.com/showthread.php?t=85791 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Multi CD sets tagging help
garym;612557 Wrote: > > 3. Select just disk 1 files, right click and choose extended tags, > second icon from top on left panel is edit field. Select Disk or > disknumber and edit field icon. Change value to 1, or 2, or whatever. > (if disknumber field doesn't exist, one of the other icons is add > fieldthen just start typing the name disknumber and it will pop up > in window...then add value of 1, 2, etc.) > For a twin CD, for example, do you number the discs 1 and 2 or 1/2 and 2/2 ? I use the latter and could not get it to work correctly until I added an extended tag called COMPILATION and set its value to 1. I did this for all my multi disc sets and it worked. Just wondering if this is why it did not work for me. Alex -- alexlark alexlark's Profile: http://forums.slimdevices.com/member.php?userid=44276 View this thread: http://forums.slimdevices.com/showthread.php?t=85791 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Instructions for connecting USB DAC to Touch
hirestech;612262 Wrote: > Today, I did some testing with all three current models of Music > Streamer and the Touch. So far, with current firmware in the > Streamers, they all (Music Streamer II, Music Streamer II+ & Music > Streamer Pro) seem to work just fine. > > I will do some more work over the weekend, but so far, this looks to be > just fine. The current (as of 2-18-2011) firmware versions are: > > Music Streamer II = 1.7 > Music Streamer II+ = 1.5 > Music Streamer Pro = 1.5 > > Kevin Halverson > CTO > High Resolution Technologies, LLC Thanks, good to know that a firmware update solves this. Olav -- OGS Vortexbox - BrutefirDRC with filter from Audiolense 4.0 - Touch (bypassed output caps) - Rotel RB-1060 (mod) - KEF Q300 OGS's Profile: http://forums.slimdevices.com/member.php?userid=32981 View this thread: http://forums.slimdevices.com/showthread.php?t=82110 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Newbie with Questions for the Experts
I've noticed that the SB Touch can be a bit fussy with the WIFI signal. My signal was dropping to abot 30-40% and playback was getting interupted (no other devices using WIFI). I set up another router in the same room as the Touch, configured as an access point and wired into the main router. My signal is now at the 70% mark and playback is flawless :-) -- alexlark alexlark's Profile: http://forums.slimdevices.com/member.php?userid=44276 View this thread: http://forums.slimdevices.com/showthread.php?t=83244 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
