[Ubnt_users] Firmware V6.0

[Eduardo]

We have currently using v5.6.6 and want to try v6.0.3, was told that v6.0 was 
more stable.

Does someone have the v6.0 firmware?

___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Firmware V6.0

[Daniel Peoples]

I sent him XW and XM, if anyone else has other versions, send them over.

*Daniel Peoples*
Resonance Broadband
*Resonancebroadband.com* 
918-429-3620


On Sat, May 6, 2017 at 4:02 PM, Eduardo  wrote:

> We have currently using v5.6.6 and want to try v6.0.3, was told that v6.0
> was more stable.
>
> Does someone have the v6.0 firmware?
>
>
>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Firmware V6.0

[Nick Bright]

v6.0 is said to have disassociation problems.

I tested v6.0.3 on several sites with a mix of XM/XW (mostly XM) 2.4GHz 
hardware. Mostly RM2 AP units, some BulletM2 units. Mostly AirGrid and 
PowerBeam SMs.


It was stable, with no disassociation issues, but we had a non-trivial 
number of SM units exhibit a *significant* drop in RX signal strength - 
but it was not consistent across the AP. We also showed experimentally 
that restoring that one SM unit back to 5.6.15 (leaving the AP unit at 
6.0.3) restored the signal strength to the previous level. Some clients 
lost as much as 18dBm RX strength.


We chose to go back to 5.6.15 at that point.

On 5/6/2017 5:49 PM, Daniel Peoples wrote:

I sent him XW and XM, if anyone else has other versions, send them over.

/Daniel Peoples/
Resonance Broadband
/Resonancebroadband.com/ 
918-429-3620


On Sat, May 6, 2017 at 4:02 PM, Eduardo > wrote:


We have currently using v5.6.6 and want to try v6.0.3, was told
that v6.0 was more stable.
Does someone have the v6.0 firmware?

___
Ubnt_users mailing list
Ubnt_users@wispa.org 
http://lists.wispa.org/mailman/listinfo/ubnt_users





___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users



--
---
-  Nick Bright-
-  Vice President of Technology   -
-  Valnet -=- We Connect You -=-  -
-  Tel 888-332-1616 x 315 / Fax 620-331-0789  -
-  Web http://www.valnet.net/ -
---
- Are your files safe?-
- Valnet Vault - Secure Cloud Backup  -
- More information & 30 day free trial at -
- http://www.valnet.net/services/valnet-vault -
---

This email message and any attachments are intended solely for the use of the 
addressees hereof. This message and any attachments may contain information 
that is confidential, privileged and exempt from disclosure under applicable 
law. If you are not the intended recipient of this message, you are prohibited 
from reading, disclosing, reproducing, distributing, disseminating or otherwise 
using this transmission. If you have received this message in error, please 
promptly notify the sender by reply E-mail and immediately delete this message 
from your system.

___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Firmware V6.0

[Scott Lambert]

Just checking,  did you also note a drop in modulation to match the drop in 
modulation?  Just want to make sure the RSSI drop you've observed is not purely 
cosmetic.

We are late adopters here, so no experience. 

On May 7, 2017 4:57:42 PM CDT, Nick Bright  wrote:
>v6.0 is said to have disassociation problems.
>
>I tested v6.0.3 on several sites with a mix of XM/XW (mostly XM) 2.4GHz
>
>hardware. Mostly RM2 AP units, some BulletM2 units. Mostly AirGrid and 
>PowerBeam SMs.
>
>It was stable, with no disassociation issues, but we had a non-trivial 
>number of SM units exhibit a *significant* drop in RX signal strength -
>
>but it was not consistent across the AP. We also showed experimentally 
>that restoring that one SM unit back to 5.6.15 (leaving the AP unit at 
>6.0.3) restored the signal strength to the previous level. Some clients
>
>lost as much as 18dBm RX strength.
>
>We chose to go back to 5.6.15 at that point.
>
>On 5/6/2017 5:49 PM, Daniel Peoples wrote:
>> I sent him XW and XM, if anyone else has other versions, send them
>over.
>>
>> /Daniel Peoples/
>> Resonance Broadband
>> /Resonancebroadband.com/ 
>> 918-429-3620
>>
>>
>> On Sat, May 6, 2017 at 4:02 PM, Eduardo > > wrote:
>>
>> We have currently using v5.6.6 and want to try v6.0.3, was told
>> that v6.0 was more stable.
>> Does someone have the v6.0 firmware?
>>
>> ___
>> Ubnt_users mailing list
>> Ubnt_users@wispa.org 
>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>> 
>>
>>
>>
>>
>> ___
>> Ubnt_users mailing list
>> Ubnt_users@wispa.org
>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>
>-- 
>---
>-  Nick Bright-
>-  Vice President of Technology   -
>-  Valnet -=- We Connect You -=-  -
>-  Tel 888-332-1616 x 315 / Fax 620-331-0789  -
>-  Web http://www.valnet.net/ -
>---
>- Are your files safe?-
>- Valnet Vault - Secure Cloud Backup  -
>- More information & 30 day free trial at -
>- http://www.valnet.net/services/valnet-vault -
>---
>
>This email message and any attachments are intended solely for the use
>of the addressees hereof. This message and any attachments may contain
>information that is confidential, privileged and exempt from disclosure
>under applicable law. If you are not the intended recipient of this
>message, you are prohibited from reading, disclosing, reproducing,
>distributing, disseminating or otherwise using this transmission. If
>you have received this message in error, please promptly notify the
>sender by reply E-mail and immediately delete this message from your
>system.

-- 
Sent from my Android device with K-9 Mail. Please excuse my brevity.___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Firmware V6.0

[Clay Stewart]

v6.0.4 is out... have not switch yet here

On Sun, May 7, 2017 at 10:27 PM, Scott Lambert 
wrote:

> Just checking, did you also note a drop in modulation to match the drop in
> modulation? Just want to make sure the RSSI drop you've observed is not
> purely cosmetic.
>
> We are late adopters here, so no experience.
>
> On May 7, 2017 4:57:42 PM CDT, Nick Bright  wrote:
>>
>> v6.0 is said to have disassociation problems.
>>
>> I tested v6.0.3 on several sites with a mix of XM/XW (mostly XM) 2.4GHz
>> hardware. Mostly RM2 AP units, some BulletM2 units. Mostly AirGrid and
>> PowerBeam SMs.
>>
>> It was stable, with no disassociation issues, but we had a non-trivial
>> number of SM units exhibit a *significant* drop in RX signal strength - but
>> it was not consistent across the AP. We also showed experimentally that
>> restoring that one SM unit back to 5.6.15 (leaving the AP unit at 6.0.3)
>> restored the signal strength to the previous level. Some clients lost as
>> much as 18dBm RX strength.
>>
>> We chose to go back to 5.6.15 at that point.
>>
>> On 5/6/2017 5:49 PM, Daniel Peoples wrote:
>>
>> I sent him XW and XM, if anyone else has other versions, send them over.
>>
>> *Daniel Peoples*
>> Resonance Broadband
>> *Resonancebroadband.com* 
>> 918-429-3620
>>
>>
>> On Sat, May 6, 2017 at 4:02 PM, Eduardo  wrote:
>>
>>> We have currently using v5.6.6 and want to try v6.0.3, was told that
>>> v6.0 was more stable.
>>>
>>> Does someone have the v6.0 firmware?
>>>
>>>
>>>
>>> ___
>>> Ubnt_users mailing list
>>> Ubnt_users@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>
>>>
>>
>>
>> ___
>> Ubnt_users mailing 
>> listUbnt_users@wispa.orghttp://lists.wispa.org/mailman/listinfo/ubnt_users
>>
>>
>>
>> --
>> ---
>> -  Nick Bright-
>> -  Vice President of Technology   -
>> -  Valnet -=- We Connect You -=-  -
>> -  Tel 888-332-1616 x 315 <(888)%20332-1616> / Fax 620-331-0789 
>> <(620)%20331-0789>  -
>> -  Web http://www.valnet.net/ -
>> ---
>> - Are your files safe?-
>> - Valnet Vault - Secure Cloud Backup  -
>> - More information & 30 day free trial at -
>> - http://www.valnet.net/services/valnet-vault -
>> ---
>>
>> This email message and any attachments are intended solely for the use of 
>> the addressees hereof. This message and any attachments may contain 
>> information that is confidential, privileged and exempt from disclosure 
>> under applicable law. If you are not the intended recipient of this message, 
>> you are prohibited from reading, disclosing, reproducing, distributing, 
>> disseminating or otherwise using this transmission. If you have received 
>> this message in error, please promptly notify the sender by reply E-mail and 
>> immediately delete this message from your system.
>>
>>
> --
> Sent from my Android device with K-9 Mail. Please excuse my brevity.
>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Firmware V6.0

[Jan-OOLLC]

What is the safest best release to use as of right now?

Jan V

On 05/08/2017 05:33 AM, Clay Stewart wrote:

v6.0.4 is out... have not switch yet here

On Sun, May 7, 2017 at 10:27 PM, Scott Lambert > wrote:


Just checking, did you also note a drop in modulation to match the
drop in modulation? Just want to make sure the RSSI drop you've
observed is not purely cosmetic.

We are late adopters here, so no experience.

On May 7, 2017 4:57:42 PM CDT, Nick Bright mailto:nick.bri...@valnet.net>> wrote:

v6.0 is said to have disassociation problems.

I tested v6.0.3 on several sites with a mix of XM/XW (mostly
XM) 2.4GHz hardware. Mostly RM2 AP units, some BulletM2 units.
Mostly AirGrid and PowerBeam SMs.

It was stable, with no disassociation issues, but we had a
non-trivial number of SM units exhibit a *significant* drop in
RX signal strength - but it was not consistent across the AP.
We also showed experimentally that restoring that one SM unit
back to 5.6.15 (leaving the AP unit at 6.0.3) restored the
signal strength to the previous level. Some clients lost as
much as 18dBm RX strength.

We chose to go back to 5.6.15 at that point.

On 5/6/2017 5:49 PM, Daniel Peoples wrote:

I sent him XW and XM, if anyone else has other versions, send
them over.

/Daniel Peoples/
Resonance Broadband
/Resonancebroadband.com/ 
918-429-3620


On Sat, May 6, 2017 at 4:02 PM, Eduardo mailto:eme...@webjogger.com>> wrote:

We have currently using v5.6.6 and want to try v6.0.3,
was told that v6.0 was more stable.
Does someone have the v6.0 firmware?

___
Ubnt_users mailing list
Ubnt_users@wispa.org 
http://lists.wispa.org/mailman/listinfo/ubnt_users





___
Ubnt_users mailing list
Ubnt_users@wispa.org 
http://lists.wispa.org/mailman/listinfo/ubnt_users




-- 
---

-  Nick Bright-
-  Vice President of Technology   -
-  Valnet -=- We Connect You -=-  -
-  Tel888-332-1616 x 315   / Fax620-331-0789 
   -
-  Webhttp://www.valnet.net/  -
---
- Are your files safe?-
- Valnet Vault - Secure Cloud Backup  -
- More information & 30 day free trial at -
-http://www.valnet.net/services/valnet-vault
  -
---

This email message and any attachments are intended solely for the use 
of the addressees hereof. This message and any attachments may contain 
information that is confidential, privileged and exempt from disclosure under 
applicable law. If you are not the intended recipient of this message, you are 
prohibited from reading, disclosing, reproducing, distributing, disseminating 
or otherwise using this transmission. If you have received this message in 
error, please promptly notify the sender by reply E-mail and immediately delete 
this message from your system.


-- 
Sent from my Android device with K-9 Mail. Please excuse my brevity.


___
Ubnt_users mailing list
Ubnt_users@wispa.org 
http://lists.wispa.org/mailman/listinfo/ubnt_users





___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users


___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Firmware V6.0

[Clay Stewart]

We are not experiencing any issue yet with 6.0.3, but will be trying 6.0.4
this week. 6.0 has disconnect issues.

On Mon, May 8, 2017 at 11:22 AM, Jan-OOLLC 
wrote:

> What is the safest best release to use as of right now?
>
> Jan V
>
> On 05/08/2017 05:33 AM, Clay Stewart wrote:
>
> v6.0.4 is out... have not switch yet here
>
> On Sun, May 7, 2017 at 10:27 PM, Scott Lambert 
> wrote:
>
>> Just checking, did you also note a drop in modulation to match the drop
>> in modulation? Just want to make sure the RSSI drop you've observed is not
>> purely cosmetic.
>>
>> We are late adopters here, so no experience.
>>
>> On May 7, 2017 4:57:42 PM CDT, Nick Bright 
>> wrote:
>>>
>>> v6.0 is said to have disassociation problems.
>>>
>>> I tested v6.0.3 on several sites with a mix of XM/XW (mostly XM) 2.4GHz
>>> hardware. Mostly RM2 AP units, some BulletM2 units. Mostly AirGrid and
>>> PowerBeam SMs.
>>>
>>> It was stable, with no disassociation issues, but we had a non-trivial
>>> number of SM units exhibit a *significant* drop in RX signal strength - but
>>> it was not consistent across the AP. We also showed experimentally that
>>> restoring that one SM unit back to 5.6.15 (leaving the AP unit at 6.0.3)
>>> restored the signal strength to the previous level. Some clients lost as
>>> much as 18dBm RX strength.
>>>
>>> We chose to go back to 5.6.15 at that point.
>>>
>>> On 5/6/2017 5:49 PM, Daniel Peoples wrote:
>>>
>>> I sent him XW and XM, if anyone else has other versions, send them over.
>>>
>>> *Daniel Peoples*
>>> Resonance Broadband
>>> *Resonancebroadband.com* 
>>> 918-429-3620
>>>
>>>
>>> On Sat, May 6, 2017 at 4:02 PM, Eduardo  wrote:
>>>
 We have currently using v5.6.6 and want to try v6.0.3, was told that
 v6.0 was more stable.

 Does someone have the v6.0 firmware?



 ___
 Ubnt_users mailing list
 Ubnt_users@wispa.org
 http://lists.wispa.org/mailman/listinfo/ubnt_users


>>>
>>>
>>> ___
>>> Ubnt_users mailing 
>>> listUbnt_users@wispa.orghttp://lists.wispa.org/mailman/listinfo/ubnt_users
>>>
>>>
>>>
>>> --
>>> ---
>>> -  Nick Bright-
>>> -  Vice President of Technology   -
>>> -  Valnet -=- We Connect You -=-  -
>>> -  Tel 888-332-1616 x 315 <%2%29%20332-1616> / Fax 620-331-0789 
>>> <%28620%29%20331-0789>  -
>>> -  Web http://www.valnet.net/ -
>>> ---
>>> - Are your files safe?-
>>> - Valnet Vault - Secure Cloud Backup  -
>>> - More information & 30 day free trial at -
>>> - http://www.valnet.net/services/valnet-vault -
>>> ---
>>>
>>> This email message and any attachments are intended solely for the use of 
>>> the addressees hereof. This message and any attachments may contain 
>>> information that is confidential, privileged and exempt from disclosure 
>>> under applicable law. If you are not the intended recipient of this 
>>> message, you are prohibited from reading, disclosing, reproducing, 
>>> distributing, disseminating or otherwise using this transmission. If you 
>>> have received this message in error, please promptly notify the sender by 
>>> reply E-mail and immediately delete this message from your system.
>>>
>>>
>> --
>> Sent from my Android device with K-9 Mail. Please excuse my brevity.
>>
>> ___
>> Ubnt_users mailing list
>> Ubnt_users@wispa.org
>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>
>>
>
>
> ___
> Ubnt_users mailing 
> listUbnt_users@wispa.orghttp://lists.wispa.org/mailman/listinfo/ubnt_users
>
>
>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Firmware V6.0

[Troy Gibson, Byhalia.net]

I am on 5.6.15 for both XM and XW.  So far working well.  Waiting on feedback 
from others on final version 6 updates to use as I did not see good results 
when I tested 6.0 so staying clear for now.
Troy


Sent from my Verizon, Samsung Galaxy smartphone
 Original message From: Jan-OOLLC  
Date: 5/8/17  11:22 AM  (GMT-05:00) To: ubnt_users@wispa.org Subject: Re: 
[Ubnt_users] Firmware V6.0 

What is the safest best release to use as of right now?

  
  
  
  
  
  Jan V



  

On 05/08/2017 05:33 AM, Clay Stewart
  wrote:



  v6.0.4 is out... have not switch yet here
  

On Sun, May 7, 2017 at 10:27 PM, Scott
  Lambert 
  wrote:

  
Just checking, did you
  also note a drop in modulation to match the drop in
  modulation? Just want to make sure the RSSI drop you've
  observed is not purely cosmetic.

  

  We are late adopters here, so no experience. 

  


  On May 7, 2017 4:57:42 PM
CDT, Nick Bright 
wrote:

  v6.0
is said to have disassociation problems.



I tested v6.0.3 on several sites with a mix of
XM/XW (mostly XM) 2.4GHz hardware. Mostly RM2 AP
units, some BulletM2 units. Mostly AirGrid and
PowerBeam SMs.



It was stable, with no disassociation issues,
but we had a non-trivial number of SM units
exhibit a *significant* drop in RX signal
strength - but it was not consistent across the
AP. We also showed experimentally that restoring
that one SM unit back to 5.6.15 (leaving the AP
unit at 6.0.3) restored the signal strength to
the previous level. Some clients lost as much as
18dBm RX strength.



We chose to go back to 5.6.15 at that point.



On 5/6/2017 5:49 PM, Daniel Peoples wrote:

  
  
I sent him XW and XM, if anyone
  else has other versions, send them over.




  

  Daniel Peoples

Resonance Broadband


Resonancebroadband.com

918-429-3620

  

  

  
  

  On Sat, May 6, 2017
at 4:02 PM, Eduardo 
wrote:


  

  
We have currently using v5.6.6
  and want to try v6.0.3, was told
  that v6.0 was more stable.
 
Does someone have the v6.0
  firmware?
 
 
  

  
  

  ___

  Ubnt_users mailing list

  Ubnt_users@wispa.org

  http://lists.wispa.org/mailman/listinfo/ubnt_users

  


  
  







___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

  
  

  

  
  -- 
---
-  Nick Bright-
-  Vice President of Technology   -
-  Valnet -=- We Connect You -=-  -
-  Tel 888-332-1616 x 315 / Fax 620-331-0789  -
-  Web http://www.valne

Re: [Ubnt_users] Firmware V6.0

[Clay Stewart]

6.0 was a double edge sword, it did improve some PtMs, but was dropping
clients randomly. Not seeing that with 6.0.3.

On Mon, May 8, 2017 at 11:40 AM, Troy Gibson, Byhalia.net 
wrote:

> I am on 5.6.15 for both XM and XW.  So far working well.  Waiting on
> feedback from others on final version 6 updates to use as I did not see
> good results when I tested 6.0 so staying clear for now.
>
> Troy
>
>
>
> Sent from my Verizon, Samsung Galaxy smartphone
>
>  Original message 
> From: Jan-OOLLC 
> Date: 5/8/17 11:22 AM (GMT-05:00)
> To: ubnt_users@wispa.org
> Subject: Re: [Ubnt_users] Firmware V6.0
>
> What is the safest best release to use as of right now?
>
> Jan V
>
> On 05/08/2017 05:33 AM, Clay Stewart wrote:
>
> v6.0.4 is out... have not switch yet here
>
> On Sun, May 7, 2017 at 10:27 PM, Scott Lambert 
> wrote:
>
>> Just checking, did you also note a drop in modulation to match the drop
>> in modulation? Just want to make sure the RSSI drop you've observed is not
>> purely cosmetic.
>>
>> We are late adopters here, so no experience.
>>
>> On May 7, 2017 4:57:42 PM CDT, Nick Bright 
>> wrote:
>>>
>>> v6.0 is said to have disassociation problems.
>>>
>>> I tested v6.0.3 on several sites with a mix of XM/XW (mostly XM) 2.4GHz
>>> hardware. Mostly RM2 AP units, some BulletM2 units. Mostly AirGrid and
>>> PowerBeam SMs.
>>>
>>> It was stable, with no disassociation issues, but we had a non-trivial
>>> number of SM units exhibit a *significant* drop in RX signal strength - but
>>> it was not consistent across the AP. We also showed experimentally that
>>> restoring that one SM unit back to 5.6.15 (leaving the AP unit at 6.0.3)
>>> restored the signal strength to the previous level. Some clients lost as
>>> much as 18dBm RX strength.
>>>
>>> We chose to go back to 5.6.15 at that point.
>>>
>>> On 5/6/2017 5:49 PM, Daniel Peoples wrote:
>>>
>>> I sent him XW and XM, if anyone else has other versions, send them over.
>>>
>>> *Daniel Peoples*
>>> Resonance Broadband
>>> *Resonancebroadband.com* <http://Resonancebroadband.com>
>>> 918-429-3620
>>>
>>>
>>> On Sat, May 6, 2017 at 4:02 PM, Eduardo  wrote:
>>>
>>>> We have currently using v5.6.6 and want to try v6.0.3, was told that
>>>> v6.0 was more stable.
>>>>
>>>> Does someone have the v6.0 firmware?
>>>>
>>>>
>>>>
>>>> ___
>>>> Ubnt_users mailing list
>>>> Ubnt_users@wispa.org
>>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>>
>>>>
>>>
>>>
>>> ___
>>> Ubnt_users mailing 
>>> listUbnt_users@wispa.orghttp://lists.wispa.org/mailman/listinfo/ubnt_users
>>>
>>>
>>>
>>> --
>>> ---
>>> -  Nick Bright-
>>> -  Vice President of Technology   -
>>> -  Valnet -=- We Connect You -=-  -
>>> -  Tel 888-332-1616 x 315 <%2%29%20332-1616> / Fax 620-331-0789 
>>> <%28620%29%20331-0789>  -
>>> -  Web http://www.valnet.net/ -
>>> ---
>>> - Are your files safe?-
>>> - Valnet Vault - Secure Cloud Backup  -
>>> - More information & 30 day free trial at -
>>> - http://www.valnet.net/services/valnet-vault -
>>> ---
>>>
>>> This email message and any attachments are intended solely for the use of 
>>> the addressees hereof. This message and any attachments may contain 
>>> information that is confidential, privileged and exempt from disclosure 
>>> under applicable law. If you are not the intended recipient of this 
>>> message, you are prohibited from reading, disclosing, reproducing, 
>>> distributing, disseminating or otherwise using this transmission. If you 
>>> have received this message in error, please promptly notify the sender by 
>>> reply E-mail and immediately delete this message from your system.
>>>
>>>
>> --
>> Sent from my Android device with K-9 Mail. Please excuse my brevity.
>>
>> ___
>> Ubnt_users mailing list
>> Ubnt_users@wispa.org
>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>
>>
>
>
> ___
> Ubnt_users mailing 
> listUbnt_users@wispa.orghttp://lists.wispa.org/mailman/listinfo/ubnt_users
>
>
>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Firmware V6.0

[Jan-OOLLC]

was the report of an 18dBm drop in RX an error with v6.0.3?

Jan V

On 05/08/2017 08:47 AM, Clay Stewart wrote:
6.0 was a double edge sword, it did improve some PtMs, but was 
dropping clients randomly. Not seeing that with 6.0.3.


On Mon, May 8, 2017 at 11:40 AM, Troy Gibson, Byhalia.net 
mailto:t...@byhalia.net>> wrote:


I am on 5.6.15 for both XM and XW.  So far working well.  Waiting
on feedback from others on final version 6 updates to use as I did
not see good results when I tested 6.0 so staying clear for now.

Troy



Sent from my Verizon, Samsung Galaxy smartphone

 Original message 
From: Jan-OOLLC mailto:j.vank...@oregononline.net>>
Date: 5/8/17 11:22 AM (GMT-05:00)
To: ubnt_users@wispa.org <mailto:ubnt_users@wispa.org>
Subject: Re: [Ubnt_users] Firmware V6.0

What is the safest best release to use as of right now?

Jan V

On 05/08/2017 05:33 AM, Clay Stewart wrote:

v6.0.4 is out... have not switch yet here

On Sun, May 7, 2017 at 10:27 PM, Scott Lambert
mailto:lamb...@lambertfam.org>> wrote:

Just checking, did you also note a drop in modulation to
match the drop in modulation? Just want to make sure the RSSI
drop you've observed is not purely cosmetic.

We are late adopters here, so no experience.

On May 7, 2017 4:57:42 PM CDT, Nick Bright
mailto:nick.bri...@valnet.net>> wrote:

v6.0 is said to have disassociation problems.

I tested v6.0.3 on several sites with a mix of XM/XW
(mostly XM) 2.4GHz hardware. Mostly RM2 AP units, some
BulletM2 units. Mostly AirGrid and PowerBeam SMs.

It was stable, with no disassociation issues, but we had
a non-trivial number of SM units exhibit a *significant*
drop in RX signal strength - but it was not consistent
across the AP. We also showed experimentally that
restoring that one SM unit back to 5.6.15 (leaving the AP
unit at 6.0.3) restored the signal strength to the
previous level. Some clients lost as much as 18dBm RX
strength.

We chose to go back to 5.6.15 at that point.

On 5/6/2017 5:49 PM, Daniel Peoples wrote:

I sent him XW and XM, if anyone else has other versions,
send them over.

/Daniel Peoples/
Resonance Broadband
/Resonancebroadband.com/ <http://Resonancebroadband.com>
918-429-3620


On Sat, May 6, 2017 at 4:02 PM, Eduardo
mailto:eme...@webjogger.com>> wrote:

We have currently using v5.6.6 and want to try
v6.0.3, was told that v6.0 was more stable.
Does someone have the v6.0 firmware?

___
Ubnt_users mailing list
Ubnt_users@wispa.org <mailto:Ubnt_users@wispa.org>
http://lists.wispa.org/mailman/listinfo/ubnt_users
<http://lists.wispa.org/mailman/listinfo/ubnt_users>




___
Ubnt_users mailing list
Ubnt_users@wispa.org <mailto:Ubnt_users@wispa.org>
http://lists.wispa.org/mailman/listinfo/ubnt_users
<http://lists.wispa.org/mailman/listinfo/ubnt_users>



-- 
---

-  Nick Bright-
-  Vice President of Technology   -
-  Valnet -=- We Connect You -=-  -
-  Tel888-332-1616 x 315   / Fax620-331-0789 
   -
-  Webhttp://www.valnet.net/  -
---
- Are your files safe?-
- Valnet Vault - Secure Cloud Backup  -
- More information & 30 day free trial at -
-http://www.valnet.net/services/valnet-vault
<http://www.valnet.net/services/valnet-vault>  -
---

This email message and any attachments are intended solely for the 
use of the addressees hereof. This message and any attachments may contain 
information that is confidential, privileged and exempt from disclosure under 
applicable law. If you are not the intended recipient of this message, you are 
prohibited from reading, disclosing, reproducing, distributing, disseminating 
or otherwise using this transmission. If you have received this message in 
error, please promptly notify the sender by reply E-mail and immediately delete 
this message from your system.


-- 
Sent from my Android device with K-9 Mail. Please excuse my

bre

Re: [Ubnt_users] Firmware V6.0

[Ridgetop Networks]

There were issues with stations refusing to reassociate until the AP was
rebooted up to 6.0.3. So far so good with 6.0.4 for me, but it was
infrequent enough in 6.0.3 that I can't confidently say it's fixed in 6.0.4.

On Mon, May 8, 2017 at 10:59 AM Jan-OOLLC 
wrote:

> was the report of an 18dBm drop in RX an error with v6.0.3?
>
> Jan V
>
> On 05/08/2017 08:47 AM, Clay Stewart wrote:
>
> 6.0 was a double edge sword, it did improve some PtMs, but was dropping
> clients randomly. Not seeing that with 6.0.3.
>
> On Mon, May 8, 2017 at 11:40 AM, Troy Gibson, Byhalia.net <
> t...@byhalia.net> wrote:
>
>> I am on 5.6.15 for both XM and XW.  So far working well.  Waiting on
>> feedback from others on final version 6 updates to use as I did not see
>> good results when I tested 6.0 so staying clear for now.
>>
>> Troy
>>
>>
>>
>> Sent from my Verizon, Samsung Galaxy smartphone
>>
>>  Original message --------
>> From: Jan-OOLLC 
>> Date: 5/8/17 11:22 AM (GMT-05:00)
>> To: ubnt_users@wispa.org
>> Subject: Re: [Ubnt_users] Firmware V6.0
>>
>> What is the safest best release to use as of right now?
>>
>> Jan V
>>
>> On 05/08/2017 05:33 AM, Clay Stewart wrote:
>>
>> v6.0.4 is out... have not switch yet here
>>
>> On Sun, May 7, 2017 at 10:27 PM, Scott Lambert 
>> wrote:
>>
>>> Just checking, did you also note a drop in modulation to match the drop
>>> in modulation? Just want to make sure the RSSI drop you've observed is not
>>> purely cosmetic.
>>>
>>> We are late adopters here, so no experience.
>>>
>>> On May 7, 2017 4:57:42 PM CDT, Nick Bright 
>>> wrote:
>>>>
>>>> v6.0 is said to have disassociation problems.
>>>>
>>>> I tested v6.0.3 on several sites with a mix of XM/XW (mostly XM) 2.4GHz
>>>> hardware. Mostly RM2 AP units, some BulletM2 units. Mostly AirGrid and
>>>> PowerBeam SMs.
>>>>
>>>> It was stable, with no disassociation issues, but we had a non-trivial
>>>> number of SM units exhibit a *significant* drop in RX signal strength - but
>>>> it was not consistent across the AP. We also showed experimentally that
>>>> restoring that one SM unit back to 5.6.15 (leaving the AP unit at 6.0.3)
>>>> restored the signal strength to the previous level. Some clients lost as
>>>> much as 18dBm RX strength.
>>>>
>>>> We chose to go back to 5.6.15 at that point.
>>>>
>>>> On 5/6/2017 5:49 PM, Daniel Peoples wrote:
>>>>
>>>> I sent him XW and XM, if anyone else has other versions, send them over.
>>>>
>>>> *Daniel Peoples*
>>>> Resonance Broadband
>>>> *Resonancebroadband.com* <http://Resonancebroadband.com>
>>>> 918-429-3620
>>>>
>>>>
>>>> On Sat, May 6, 2017 at 4:02 PM, Eduardo  wrote:
>>>>
>>>>> We have currently using v5.6.6 and want to try v6.0.3, was told that
>>>>> v6.0 was more stable.
>>>>>
>>>>> Does someone have the v6.0 firmware?
>>>>>
>>>>>
>>>>>
>>>>> ___
>>>>> Ubnt_users mailing list
>>>>> Ubnt_users@wispa.org
>>>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>>>
>>>>>
>>>>
>>>>
>>>> ___
>>>> Ubnt_users mailing 
>>>> listUbnt_users@wispa.orghttp://lists.wispa.org/mailman/listinfo/ubnt_users
>>>>
>>>>
>>>>
>>>> --
>>>> ---
>>>> -  Nick Bright-
>>>> -  Vice President of Technology   -
>>>> -  Valnet -=- We Connect You -=-  -
>>>> -  Tel 888-332-1616 x 315 <%2%29%20332-1616> / Fax 620-331-0789 
>>>> <%28620%29%20331-0789>  -
>>>> -  Web http://www.valnet.net/ -
>>>> ---
>>>> - Are your files safe?-
>>>> - Valnet Vault - Secure Cloud Backup  -
>>>> - More information & 30 day free trial at -
>>>> - http://www.valnet.net/services/valnet-vault -
>>>> ---
>>>&

Re: [Ubnt_users] Firmware V6.0

[Jan-OOLLC]

So, we can assume v6.0.4 is beta and we are the test subjects? Can we 
expect a report from whoever is daring enough to deploy?


Jan V

On 05/08/2017 10:52 AM, Ridgetop Networks wrote:
There were issues with stations refusing to reassociate until the AP 
was rebooted up to 6.0.3. So far so good with 6.0.4 for me, but it was 
infrequent enough in 6.0.3 that I can't confidently say it's fixed in 
6.0.4.


On Mon, May 8, 2017 at 10:59 AM Jan-OOLLC <mailto:j.vank...@oregononline.net>> wrote:


was the report of an 18dBm drop in RX an error with v6.0.3?

Jan V

On 05/08/2017 08:47 AM, Clay Stewart wrote:

6.0 was a double edge sword, it did improve some PtMs, but was
dropping clients randomly. Not seeing that with 6.0.3.

On Mon, May 8, 2017 at 11:40 AM, Troy Gibson, Byhalia.net
mailto:t...@byhalia.net>> wrote:

I am on 5.6.15 for both XM and XW.  So far working well. 
Waiting on feedback from others on final version 6 updates to

use as I did not see good results when I tested 6.0 so
staying clear for now.

Troy



Sent from my Verizon, Samsung Galaxy smartphone

 Original message 
From: Jan-OOLLC mailto:j.vank...@oregononline.net>>
Date: 5/8/17 11:22 AM (GMT-05:00)
To: ubnt_users@wispa.org <mailto:ubnt_users@wispa.org>
    Subject: Re: [Ubnt_users] Firmware V6.0

What is the safest best release to use as of right now?

Jan V

On 05/08/2017 05:33 AM, Clay Stewart wrote:

v6.0.4 is out... have not switch yet here

On Sun, May 7, 2017 at 10:27 PM, Scott Lambert
mailto:lamb...@lambertfam.org>> wrote:

Just checking, did you also note a drop in modulation to
match the drop in modulation? Just want to make sure the
RSSI drop you've observed is not purely cosmetic.

We are late adopters here, so no experience.

On May 7, 2017 4:57:42 PM CDT, Nick Bright
mailto:nick.bri...@valnet.net>>
wrote:

v6.0 is said to have disassociation problems.

I tested v6.0.3 on several sites with a mix of XM/XW
(mostly XM) 2.4GHz hardware. Mostly RM2 AP units,
some BulletM2 units. Mostly AirGrid and PowerBeam SMs.

It was stable, with no disassociation issues, but we
had a non-trivial number of SM units exhibit a
*significant* drop in RX signal strength - but it
was not consistent across the AP. We also showed
experimentally that restoring that one SM unit back
to 5.6.15 (leaving the AP unit at 6.0.3) restored
the signal strength to the previous level. Some
clients lost as much as 18dBm RX strength.

We chose to go back to 5.6.15 at that point.

On 5/6/2017 5:49 PM, Daniel Peoples wrote:

I sent him XW and XM, if anyone else has other
versions, send them over.

/Daniel Peoples/
Resonance Broadband
/Resonancebroadband.com/
<http://Resonancebroadband.com>
918-429-3620


On Sat, May 6, 2017 at 4:02 PM, Eduardo
mailto:eme...@webjogger.com>> wrote:

We have currently using v5.6.6 and want to try
v6.0.3, was told that v6.0 was more stable.
Does someone have the v6.0 firmware?

___
Ubnt_users mailing list
Ubnt_users@wispa.org <mailto:Ubnt_users@wispa.org>
http://lists.wispa.org/mailman/listinfo/ubnt_users




___
Ubnt_users mailing list
Ubnt_users@wispa.org <mailto:Ubnt_users@wispa.org>
http://lists.wispa.org/mailman/listinfo/ubnt_users



-- 
---

-  Nick Bright-
-  Vice President of Technology   -
-  Valnet -=- We Connect You -=-  -
-  Tel888-332-1616 x 315   / 
Fax620-331-0789-
-  Webhttp://www.valnet.net/  -
---
- Are your files safe?-
- Valnet Vault - Secure Cloud Backup  -
- More information & 30 day free trial at -
-http://www.valnet.net/services/valnet-vault  -
---

This email message a

Re: [Ubnt_users] Firmware V6.0

[James Wilson]

Odd, UBNT called 6.0.4 beta when they  announced it a non-beta forum...

We've installed 6.0.4 in a few APs and STAs in both bridge and router mode
and haven't run into any problems.

On May 8, 2017 2:07 PM, "Jan-OOLLC"  wrote:

So, we can assume v6.0.4 is beta and we are the test subjects?  Can we
expect a report from whoever is daring enough to deploy?

Jan V

On 05/08/2017 10:52 AM, Ridgetop Networks wrote:

There were issues with stations refusing to reassociate until the AP was
rebooted up to 6.0.3. So far so good with 6.0.4 for me, but it was
infrequent enough in 6.0.3 that I can't confidently say it's fixed in 6.0.4.

On Mon, May 8, 2017 at 10:59 AM Jan-OOLLC 
wrote:

> was the report of an 18dBm drop in RX an error with v6.0.3?
>
> Jan V
>
> On 05/08/2017 08:47 AM, Clay Stewart wrote:
>
> 6.0 was a double edge sword, it did improve some PtMs, but was dropping
> clients randomly. Not seeing that with 6.0.3.
>
> On Mon, May 8, 2017 at 11:40 AM, Troy Gibson, Byhalia.net <
> t...@byhalia.net> wrote:
>
>> I am on 5.6.15 for both XM and XW.  So far working well.  Waiting on
>> feedback from others on final version 6 updates to use as I did not see
>> good results when I tested 6.0 so staying clear for now.
>>
>> Troy
>>
>>
>>
>> Sent from my Verizon, Samsung Galaxy smartphone
>>
>>  Original message 
>> From: Jan-OOLLC 
>> Date: 5/8/17 11:22 AM (GMT-05:00)
>> To: ubnt_users@wispa.org
>> Subject: Re: [Ubnt_users] Firmware V6.0
>>
>> What is the safest best release to use as of right now?
>>
>> Jan V
>>
>> On 05/08/2017 05:33 AM, Clay Stewart wrote:
>>
>> v6.0.4 is out... have not switch yet here
>>
>> On Sun, May 7, 2017 at 10:27 PM, Scott Lambert 
>> wrote:
>>
>>> Just checking, did you also note a drop in modulation to match the drop
>>> in modulation? Just want to make sure the RSSI drop you've observed is not
>>> purely cosmetic.
>>>
>>> We are late adopters here, so no experience.
>>>
>>> On May 7, 2017 4:57:42 PM CDT, Nick Bright 
>>> wrote:
>>>>
>>>> v6.0 is said to have disassociation problems.
>>>>
>>>> I tested v6.0.3 on several sites with a mix of XM/XW (mostly XM) 2.4GHz
>>>> hardware. Mostly RM2 AP units, some BulletM2 units. Mostly AirGrid and
>>>> PowerBeam SMs.
>>>>
>>>> It was stable, with no disassociation issues, but we had a non-trivial
>>>> number of SM units exhibit a *significant* drop in RX signal strength - but
>>>> it was not consistent across the AP. We also showed experimentally that
>>>> restoring that one SM unit back to 5.6.15 (leaving the AP unit at 6.0.3)
>>>> restored the signal strength to the previous level. Some clients lost as
>>>> much as 18dBm RX strength.
>>>>
>>>> We chose to go back to 5.6.15 at that point.
>>>>
>>>> On 5/6/2017 5:49 PM, Daniel Peoples wrote:
>>>>
>>>> I sent him XW and XM, if anyone else has other versions, send them over.
>>>>
>>>> *Daniel Peoples*
>>>> Resonance Broadband
>>>> *Resonancebroadband.com* <http://Resonancebroadband.com>
>>>> 918-429-3620
>>>>
>>>>
>>>> On Sat, May 6, 2017 at 4:02 PM, Eduardo  wrote:
>>>>
>>>>> We have currently using v5.6.6 and want to try v6.0.3, was told that
>>>>> v6.0 was more stable.
>>>>>
>>>>> Does someone have the v6.0 firmware?
>>>>>
>>>>>
>>>>>
>>>>> ___
>>>>> Ubnt_users mailing list
>>>>> Ubnt_users@wispa.org
>>>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>>>
>>>>>
>>>>
>>>>
>>>> ___
>>>> Ubnt_users mailing 
>>>> listUbnt_users@wispa.orghttp://lists.wispa.org/mailman/listinfo/ubnt_users
>>>>
>>>>
>>>>
>>>> --
>>>> ---
>>>> -  Nick Bright-
>>>> -  Vice President of Technology   -
>>>> -  Valnet -=- We Connect You -=-  -
>>>> -  Tel 888-332-1616 x 315 <%2%29%20332-1616> / Fax 620-331-0789 
>>>> <%28620%29%20331-0789>  -
>>>> -  Web http://www

Re: [Ubnt_users] Firmware V6.0

[Kevin Lamothe]

I was running 6.0.4-dev&beta on about 400 AP/CPEs mostly XM models for 
about 4 weeks. It fixed my disconnect problems.

Slowly rolling out 6.0.4 final, seems fine thus far.

On 5/8/17 2:05 PM, Jan-OOLLC wrote:
>
> So, we can assume v6.0.4 is beta and we are the test subjects? Can we 
> expect a report from whoever is daring enough to deploy?
>
> Jan V
>
> On 05/08/2017 10:52 AM, Ridgetop Networks wrote:
>> There were issues with stations refusing to reassociate until the AP 
>> was rebooted up to 6.0.3. So far so good with 6.0.4 for me, but it 
>> was infrequent enough in 6.0.3 that I can't confidently say it's 
>> fixed in 6.0.4.
>>
>> On Mon, May 8, 2017 at 10:59 AM Jan-OOLLC > <mailto:j.vank...@oregononline.net>> wrote:
>>
>> was the report of an 18dBm drop in RX an error with v6.0.3?
>>
>> Jan V
>>
>> On 05/08/2017 08:47 AM, Clay Stewart wrote:
>>> 6.0 was a double edge sword, it did improve some PtMs, but was
>>> dropping clients randomly. Not seeing that with 6.0.3.
>>>
>>> On Mon, May 8, 2017 at 11:40 AM, Troy Gibson, Byhalia.net
>>> mailto:t...@byhalia.net>> wrote:
>>>
>>> I am on 5.6.15 for both XM and XW.  So far working well. 
>>> Waiting on feedback from others on final version 6 updates
>>> to use as I did not see good results when I tested 6.0 so
>>> staying clear for now.
>>>
>>> Troy
>>>
>>>
>>>
>>> Sent from my Verizon, Samsung Galaxy smartphone
>>>
>>>  Original message 
>>> From: Jan-OOLLC >> <mailto:j.vank...@oregononline.net>>
>>> Date: 5/8/17 11:22 AM (GMT-05:00)
>>> To: ubnt_users@wispa.org <mailto:ubnt_users@wispa.org>
>>> Subject: Re: [Ubnt_users] Firmware V6.0
>>>
>>> What is the safest best release to use as of right now?
>>>
>>> Jan V
>>>
>>> On 05/08/2017 05:33 AM, Clay Stewart wrote:
>>>> v6.0.4 is out... have not switch yet here
>>>>
>>>> On Sun, May 7, 2017 at 10:27 PM, Scott Lambert
>>>> mailto:lamb...@lambertfam.org>> wrote:
>>>>
>>>> Just checking, did you also note a drop in modulation
>>>> to match the drop in modulation? Just want to make sure
>>>> the RSSI drop you've observed is not purely cosmetic.
>>>>
>>>> We are late adopters here, so no experience.
>>>>
>>>> On May 7, 2017 4:57:42 PM CDT, Nick Bright
>>>> >>> <mailto:nick.bri...@valnet.net>> wrote:
>>>>
>>>> v6.0 is said to have disassociation problems.
>>>>
>>>> I tested v6.0.3 on several sites with a mix of
>>>> XM/XW (mostly XM) 2.4GHz hardware. Mostly RM2 AP
>>>> units, some BulletM2 units. Mostly AirGrid and
>>>> PowerBeam SMs.
>>>>
>>>> It was stable, with no disassociation issues, but
>>>> we had a non-trivial number of SM units exhibit a
>>>> *significant* drop in RX signal strength - but it
>>>> was not consistent across the AP. We also showed
>>>> experimentally that restoring that one SM unit back
>>>> to 5.6.15 (leaving the AP unit at 6.0.3) restored
>>>> the signal strength to the previous level. Some
>>>> clients lost as much as 18dBm RX strength.
>>>>
>>>> We chose to go back to 5.6.15 at that point.
>>>>
>>>> On 5/6/2017 5:49 PM, Daniel Peoples wrote:
>>>>> I sent him XW and XM, if anyone else has other
>>>>> versions, send them over.
>>>>>
>>>>> /Daniel Peoples/
>>>>> Resonance Broadband
>>>>> /Resonancebroadband.com/
>>>>> <http://Resonancebroadband.com>
>>>>> 918-429-3620
>>>>>
>>>>>
>>>>> On Sat, May 6, 2017 at 4:02 PM, Eduardo
>>

Re: [Ubnt_users] Firmware V6.0

[Ridgetop Networks]

It moved from beta into general release pretty fast, like some other recent
firmwares have. I think there are other motivations like security patches
and high priority bug fixes, when it moves fast like that - making
important updates available to people who aren't beta testers.

I haven't had any problems yet with v6.0.4 beta, for what it's worth... On
the other hand, I had been running 6.0.3 beta for weeks before I saw
problems.
On Mon, May 8, 2017 at 1:07 PM Jan-OOLLC  wrote:

> So, we can assume v6.0.4 is beta and we are the test subjects?  Can we
> expect a report from whoever is daring enough to deploy?
>
> Jan V
>
> On 05/08/2017 10:52 AM, Ridgetop Networks wrote:
>
> There were issues with stations refusing to reassociate until the AP was
> rebooted up to 6.0.3. So far so good with 6.0.4 for me, but it was
> infrequent enough in 6.0.3 that I can't confidently say it's fixed in 6.0.4.
>
> On Mon, May 8, 2017 at 10:59 AM Jan-OOLLC 
> wrote:
>
>> was the report of an 18dBm drop in RX an error with v6.0.3?
>>
>> Jan V
>>
>> On 05/08/2017 08:47 AM, Clay Stewart wrote:
>>
>> 6.0 was a double edge sword, it did improve some PtMs, but was dropping
>> clients randomly. Not seeing that with 6.0.3.
>>
>> On Mon, May 8, 2017 at 11:40 AM, Troy Gibson, Byhalia.net <
>> t...@byhalia.net> wrote:
>>
>>> I am on 5.6.15 for both XM and XW.  So far working well.  Waiting on
>>> feedback from others on final version 6 updates to use as I did not see
>>> good results when I tested 6.0 so staying clear for now.
>>>
>>> Troy
>>>
>>>
>>>
>>> Sent from my Verizon, Samsung Galaxy smartphone
>>>
>>>  Original message 
>>> From: Jan-OOLLC 
>>> Date: 5/8/17 11:22 AM (GMT-05:00)
>>> To: ubnt_users@wispa.org
>>> Subject: Re: [Ubnt_users] Firmware V6.0
>>>
>>> What is the safest best release to use as of right now?
>>>
>>> Jan V
>>>
>>> On 05/08/2017 05:33 AM, Clay Stewart wrote:
>>>
>>> v6.0.4 is out... have not switch yet here
>>>
>>> On Sun, May 7, 2017 at 10:27 PM, Scott Lambert 
>>> wrote:
>>>
>>>> Just checking, did you also note a drop in modulation to match the drop
>>>> in modulation? Just want to make sure the RSSI drop you've observed is not
>>>> purely cosmetic.
>>>>
>>>> We are late adopters here, so no experience.
>>>>
>>>> On May 7, 2017 4:57:42 PM CDT, Nick Bright 
>>>> wrote:
>>>>>
>>>>> v6.0 is said to have disassociation problems.
>>>>>
>>>>> I tested v6.0.3 on several sites with a mix of XM/XW (mostly XM)
>>>>> 2.4GHz hardware. Mostly RM2 AP units, some BulletM2 units. Mostly AirGrid
>>>>> and PowerBeam SMs.
>>>>>
>>>>> It was stable, with no disassociation issues, but we had a non-trivial
>>>>> number of SM units exhibit a *significant* drop in RX signal strength - 
>>>>> but
>>>>> it was not consistent across the AP. We also showed experimentally that
>>>>> restoring that one SM unit back to 5.6.15 (leaving the AP unit at 6.0.3)
>>>>> restored the signal strength to the previous level. Some clients lost as
>>>>> much as 18dBm RX strength.
>>>>>
>>>>> We chose to go back to 5.6.15 at that point.
>>>>>
>>>>> On 5/6/2017 5:49 PM, Daniel Peoples wrote:
>>>>>
>>>>> I sent him XW and XM, if anyone else has other versions, send them
>>>>> over.
>>>>>
>>>>> *Daniel Peoples*
>>>>> Resonance Broadband
>>>>> *Resonancebroadband.com* <http://Resonancebroadband.com>
>>>>> 918-429-3620
>>>>>
>>>>>
>>>>> On Sat, May 6, 2017 at 4:02 PM, Eduardo  wrote:
>>>>>
>>>>>> We have currently using v5.6.6 and want to try v6.0.3, was told that
>>>>>> v6.0 was more stable.
>>>>>>
>>>>>> Does someone have the v6.0 firmware?
>>>>>>
>>>>>>
>>>>>>
>>>>>> ___
>>>>>> Ubnt_users mailing list
>>>>>> Ubnt_users@wispa.org
>>>>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>>>>
>>>>>>
>>>>>
>>>>

Re: [Ubnt_users] Firmware V6.0

[Nick Bright]

On 5/8/2017 10:58 AM, Jan-OOLLC wrote:
>
> was the report of an 18dBm drop in RX an error with v6.0.3?
>
> Jan V
>
The problem was observed in 6.0.3, and was corroborated by the customers 
complaining of slow service. We confirmed that throughput was poor; so 
it wasn't just a UI artifact or some kind of reporting error. Rolling 
those specific clients back to 5.6.15 did veritably fix the issue.

-- 
---
-  Nick Bright-
-  Vice President of Technology   -
-  Valnet -=- We Connect You -=-  -
-  Tel 888-332-1616 x 315 / Fax 620-331-0789  -
-  Web http://www.valnet.net/ -
---
- Are your files safe?-
- Valnet Vault - Secure Cloud Backup  -
- More information & 30 day free trial at -
- http://www.valnet.net/services/valnet-vault -
---

This email message and any attachments are intended solely for the use of the 
addressees hereof. This message and any attachments may contain information 
that is confidential, privileged and exempt from disclosure under applicable 
law. If you are not the intended recipient of this message, you are prohibited 
from reading, disclosing, reproducing, distributing, disseminating or otherwise 
using this transmission. If you have received this message in error, please 
promptly notify the sender by reply E-mail and immediately delete this message 
from your system.

___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Firmware V6.0

[Brian Hesterberg via Ubnt_users]

I had 6.03 and it was horrible. First time I'd upgraded in about a year. After 
the upgrade, customers would slowly disconnect from the AP. Took about 3 hours 
for 25 customers to drop. I'd reboot the AP and they'd all come back. Had 
multiple reports of slow service the next day after upgrade.
That's for both RocketM2 and RocketM365 AP's.
I won't touch any v6 for some time now.

Brian

Sent from my Verizon Wireless 4G LTE DROID
On May 8, 2017 1:21 PM, Nick Bright  wrote:
>
> On 5/8/2017 10:58 AM, Jan-OOLLC wrote: 
> > 
> > was the report of an 18dBm drop in RX an error with v6.0.3? 
> > 
> > Jan V 
> > 
> The problem was observed in 6.0.3, and was corroborated by the customers 
> complaining of slow service. We confirmed that throughput was poor; so 
> it wasn't just a UI artifact or some kind of reporting error. Rolling 
> those specific clients back to 5.6.15 did veritably fix the issue. 
>
> -- 
> --- 
> -  Nick Bright    - 
> -  Vice President of Technology   - 
> -  Valnet -=- We Connect You -=-  - 
> -  Tel 888-332-1616 x 315 / Fax 620-331-0789  - 
> -  Web http://www.valnet.net/ - 
> --- 
> - Are your files safe?    - 
> - Valnet Vault - Secure Cloud Backup  - 
> - More information & 30 day free trial at - 
> - http://www.valnet.net/services/valnet-vault - 
> --- 
>
> This email message and any attachments are intended solely for the use of the 
> addressees hereof. This message and any attachments may contain information 
> that is confidential, privileged and exempt from disclosure under applicable 
> law. If you are not the intended recipient of this message, you are 
> prohibited from reading, disclosing, reproducing, distributing, disseminating 
> or otherwise using this transmission. If you have received this message in 
> error, please promptly notify the sender by reply E-mail and immediately 
> delete this message from your system. 
>
> ___ 
> Ubnt_users mailing list 
> Ubnt_users@wispa.org 
> http://lists.wispa.org/mailman/listinfo/ubnt_users 
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Firmware V6.0

[Blake Darling]

Please remove me from this thread/group…..

Thanks, 

Blake 

Blake Darling
President 
801 647  Office/Cell
866 566 3827 Fax
bl...@completecommunicationsinc.com
www.completecommunications.com
http://lnked.in/completecommunicationsinc 
<http://lnked.in/completecommunicationsinc>
Check us out in Enterprise Networking Magazine 2016 SDWWAN Top 10 Companies!
http://www.enterprisenetworkingmag.com/vendor/article9/completecommunications 
<http://www.enterprisenetworkingmag.com/vendor/article9/completecommunications> 
Digital Magazine 
Link:http://www.enterprisenetworkingmag.com/magazines/May/2016/ 
<http://www.enterprisenetworkingmag.com/magazines/May/2016/>
> On May 8, 2017, at 12:10 PM, James Wilson  wrote:
> 
> Odd, UBNT called 6.0.4 beta when they  announced it a non-beta forum...
> 
> We've installed 6.0.4 in a few APs and STAs in both bridge and router mode 
> and haven't run into any problems. 
> 
> On May 8, 2017 2:07 PM, "Jan-OOLLC"  <mailto:j.vank...@oregononline.net>> wrote:
> So, we can assume v6.0.4 is beta and we are the test subjects?  Can we expect 
> a report from whoever is daring enough to deploy?
> Jan V
> 
> On 05/08/2017 10:52 AM, Ridgetop Networks wrote:
>> There were issues with stations refusing to reassociate until the AP was 
>> rebooted up to 6.0.3. So far so good with 6.0.4 for me, but it was 
>> infrequent enough in 6.0.3 that I can't confidently say it's fixed in 6.0.4.
>> 
>> On Mon, May 8, 2017 at 10:59 AM Jan-OOLLC > <mailto:j.vank...@oregononline.net>> wrote:
>> was the report of an 18dBm drop in RX an error with v6.0.3?  
>> Jan V
>> 
>> On 05/08/2017 08:47 AM, Clay Stewart wrote:
>>> 6.0 was a double edge sword, it did improve some PtMs, but was dropping 
>>> clients randomly. Not seeing that with 6.0.3.
>>> 
>>> On Mon, May 8, 2017 at 11:40 AM, Troy Gibson, Byhalia.net >> <mailto:t...@byhalia.net>> wrote:
>>> I am on 5.6.15 for both XM and XW.  So far working well.  Waiting on 
>>> feedback from others on final version 6 updates to use as I did not see 
>>> good results when I tested 6.0 so staying clear for now.
>>> 
>>> Troy
>>> 
>>> 
>>> 
>>> Sent from my Verizon, Samsung Galaxy smartphone
>>> 
>>>  Original message 
>>> From: Jan-OOLLC >> <mailto:j.vank...@oregononline.net>>
>>> Date: 5/8/17 11:22 AM (GMT-05:00)
>>> To: ubnt_users@wispa.org <mailto:ubnt_users@wispa.org>
>>> Subject: Re: [Ubnt_users] Firmware V6.0
>>> 
>>> What is the safest best release to use as of right now?
>>> 
>>> Jan V
>>> 
>>> On 05/08/2017 05:33 AM, Clay Stewart wrote:
>>>> v6.0.4 is out... have not switch yet here
>>>> 
>>>> On Sun, May 7, 2017 at 10:27 PM, Scott Lambert >>> <mailto:lamb...@lambertfam.org>> wrote:
>>>> Just checking, did you also note a drop in modulation to match the drop in 
>>>> modulation? Just want to make sure the RSSI drop you've observed is not 
>>>> purely cosmetic.
>>>> 
>>>> We are late adopters here, so no experience. 
>>>> 
>>>> On May 7, 2017 4:57:42 PM CDT, Nick Bright >>> <mailto:nick.bri...@valnet.net>> wrote:
>>>> v6.0 is said to have disassociation problems.
>>>> 
>>>> I tested v6.0.3 on several sites with a mix of XM/XW (mostly XM) 2.4GHz 
>>>> hardware. Mostly RM2 AP units, some BulletM2 units. Mostly AirGrid and 
>>>> PowerBeam SMs.
>>>> 
>>>> It was stable, with no disassociation issues, but we had a non-trivial 
>>>> number of SM units exhibit a *significant* drop in RX signal strength - 
>>>> but it was not consistent across the AP. We also showed experimentally 
>>>> that restoring that one SM unit back to 5.6.15 (leaving the AP unit at 
>>>> 6.0.3) restored the signal strength to the previous level. Some clients 
>>>> lost as much as 18dBm RX strength.
>>>> 
>>>> We chose to go back to 5.6.15 at that point.
>>>> 
>>>> On 5/6/2017 5:49 PM, Daniel Peoples wrote:
>>>>> I sent him XW and XM, if anyone else has other versions, send them over.
>>>>> 
>>>>> Daniel Peoples
>>>>> Resonance Broadband
>>>>> Resonancebroadband.com <http://resonancebroadband.com/>
>>>>> 918-429-3620
>>>>> 
>>>>> 
>>>>> On Sat, May 6, 2017 at 4:02 PM, Eduardo 

Re: [Ubnt_users] Firmware V6.0

[Mike Lyon]

Blake,

You have to log into your WISPA account to take yourself off of mailing
lists.

Cheers,
Mike


On Mon, May 8, 2017 at 12:02 PM, Blake Darling <
bl...@completecommunicationsinc.com> wrote:

> Please remove me from this thread/group…..
>
> Thanks,
>
> Blake
>
> Blake Darling
> President
> 801 647  <(801)%20647-> Office/Cell
> 866 566 3827 <(866)%20566-3827> Fax
> bl...@completecommunicationsinc.com
> www.completecommunications.com
> http://lnked.in/completecommunicationsinc
> Check us out in Enterprise Networking Magazine 2016 SDWWAN Top
> 10 Companies!
> http://www.enterprisenetworkingmag.com/vendor/article9/
> completecommunications Digital Magazine Link:http://www.
> enterprisenetworkingmag.com/magazines/May/2016/
>
> On May 8, 2017, at 12:10 PM, James Wilson  wrote:
>
> Odd, UBNT called 6.0.4 beta when they  announced it a non-beta forum...
>
> We've installed 6.0.4 in a few APs and STAs in both bridge and router mode
> and haven't run into any problems.
>
> On May 8, 2017 2:07 PM, "Jan-OOLLC"  wrote:
>
> So, we can assume v6.0.4 is beta and we are the test subjects?  Can we
> expect a report from whoever is daring enough to deploy?
>
> Jan V
>
> On 05/08/2017 10:52 AM, Ridgetop Networks wrote:
>
> There were issues with stations refusing to reassociate until the AP was
> rebooted up to 6.0.3. So far so good with 6.0.4 for me, but it was
> infrequent enough in 6.0.3 that I can't confidently say it's fixed in 6.0.4.
>
> On Mon, May 8, 2017 at 10:59 AM Jan-OOLLC 
> wrote:
>
>> was the report of an 18dBm drop in RX an error with v6.0.3?
>>
>> Jan V
>>
>> On 05/08/2017 08:47 AM, Clay Stewart wrote:
>>
>> 6.0 was a double edge sword, it did improve some PtMs, but was dropping
>> clients randomly. Not seeing that with 6.0.3.
>>
>> On Mon, May 8, 2017 at 11:40 AM, Troy Gibson, Byhalia.net <
>> t...@byhalia.net> wrote:
>>
>>> I am on 5.6.15 for both XM and XW.  So far working well.  Waiting on
>>> feedback from others on final version 6 updates to use as I did not see
>>> good results when I tested 6.0 so staying clear for now.
>>>
>>> Troy
>>>
>>>
>>>
>>> Sent from my Verizon, Samsung Galaxy smartphone
>>>
>>>  Original message 
>>> From: Jan-OOLLC 
>>> Date: 5/8/17 11:22 AM (GMT-05:00)
>>> To: ubnt_users@wispa.org
>>> Subject: Re: [Ubnt_users] Firmware V6.0
>>>
>>> What is the safest best release to use as of right now?
>>>
>>> Jan V
>>>
>>> On 05/08/2017 05:33 AM, Clay Stewart wrote:
>>>
>>> v6.0.4 is out... have not switch yet here
>>>
>>> On Sun, May 7, 2017 at 10:27 PM, Scott Lambert 
>>> wrote:
>>>
>>>> Just checking, did you also note a drop in modulation to match the drop
>>>> in modulation? Just want to make sure the RSSI drop you've observed is not
>>>> purely cosmetic.
>>>>
>>>> We are late adopters here, so no experience.
>>>>
>>>> On May 7, 2017 4:57:42 PM CDT, Nick Bright 
>>>> wrote:
>>>>>
>>>>> v6.0 is said to have disassociation problems.
>>>>>
>>>>> I tested v6.0.3 on several sites with a mix of XM/XW (mostly XM)
>>>>> 2.4GHz hardware. Mostly RM2 AP units, some BulletM2 units. Mostly AirGrid
>>>>> and PowerBeam SMs.
>>>>>
>>>>> It was stable, with no disassociation issues, but we had a non-trivial
>>>>> number of SM units exhibit a *significant* drop in RX signal strength - 
>>>>> but
>>>>> it was not consistent across the AP. We also showed experimentally that
>>>>> restoring that one SM unit back to 5.6.15 (leaving the AP unit at 6.0.3)
>>>>> restored the signal strength to the previous level. Some clients lost as
>>>>> much as 18dBm RX strength.
>>>>>
>>>>> We chose to go back to 5.6.15 at that point.
>>>>>
>>>>> On 5/6/2017 5:49 PM, Daniel Peoples wrote:
>>>>>
>>>>> I sent him XW and XM, if anyone else has other versions, send them
>>>>> over.
>>>>>
>>>>> *Daniel Peoples*
>>>>> Resonance Broadband
>>>>> *Resonancebroadband.com* <http://resonancebroadband.com/>
>>>>> 918-429-3620
>>>>>
>>>>>
>>>>> On Sat, May 6, 2017 at 4:02 PM, Eduard

Re: [Ubnt_users] Firmware V6.0

[Christian Hilliard]

Please remove me as well..
Thank you
Christian Hilliard

Founder
308-698-1444
chris.hilli...@usacommunications.tv
USACommunications.tv <http://usacommunications.tv/>
> On May 8, 2017, at 2:02 PM, Blake Darling 
>  wrote:
> 
> Please remove me from this thread/group…..
> 
> Thanks, 
> 
> Blake 
> 
> Blake Darling
> President 
> 801 647  Office/Cell
> 866 566 3827 Fax
> bl...@completecommunicationsinc.com 
> <mailto:bl...@completecommunicationsinc.com>
> www.completecommunications.com
> http://lnked.in/completecommunicationsinc 
> <http://lnked.in/completecommunicationsinc>
> Check us out in Enterprise Networking Magazine 2016 SDWWAN Top 10 Companies!
> http://www.enterprisenetworkingmag.com/vendor/article9/completecommunications 
> <http://www.enterprisenetworkingmag.com/vendor/article9/completecommunications>
>  Digital Magazine 
> Link:http://www.enterprisenetworkingmag.com/magazines/May/2016/ 
> <http://www.enterprisenetworkingmag.com/magazines/May/2016/>
>> On May 8, 2017, at 12:10 PM, James Wilson > <mailto:ja...@ridgecomms.com>> wrote:
>> 
>> Odd, UBNT called 6.0.4 beta when they  announced it a non-beta forum...
>> 
>> We've installed 6.0.4 in a few APs and STAs in both bridge and router mode 
>> and haven't run into any problems. 
>> 
>> On May 8, 2017 2:07 PM, "Jan-OOLLC" > <mailto:j.vank...@oregononline.net>> wrote:
>> So, we can assume v6.0.4 is beta and we are the test subjects?  Can we 
>> expect a report from whoever is daring enough to deploy?
>> Jan V
>> 
>> On 05/08/2017 10:52 AM, Ridgetop Networks wrote:
>>> There were issues with stations refusing to reassociate until the AP was 
>>> rebooted up to 6.0.3. So far so good with 6.0.4 for me, but it was 
>>> infrequent enough in 6.0.3 that I can't confidently say it's fixed in 6.0.4.
>>> 
>>> On Mon, May 8, 2017 at 10:59 AM Jan-OOLLC >> <mailto:j.vank...@oregononline.net>> wrote:
>>> was the report of an 18dBm drop in RX an error with v6.0.3?  
>>> Jan V
>>> 
>>> On 05/08/2017 08:47 AM, Clay Stewart wrote:
>>>> 6.0 was a double edge sword, it did improve some PtMs, but was dropping 
>>>> clients randomly. Not seeing that with 6.0.3.
>>>> 
>>>> On Mon, May 8, 2017 at 11:40 AM, Troy Gibson, Byhalia.net 
>>>> <http://byhalia.net/> mailto:t...@byhalia.net>> wrote:
>>>> I am on 5.6.15 for both XM and XW.  So far working well.  Waiting on 
>>>> feedback from others on final version 6 updates to use as I did not see 
>>>> good results when I tested 6.0 so staying clear for now.
>>>> 
>>>> Troy
>>>> 
>>>> 
>>>> 
>>>> Sent from my Verizon, Samsung Galaxy smartphone
>>>> 
>>>>  Original message 
>>>> From: Jan-OOLLC >>> <mailto:j.vank...@oregononline.net>>
>>>> Date: 5/8/17 11:22 AM (GMT-05:00)
>>>> To: ubnt_users@wispa.org <mailto:ubnt_users@wispa.org>
>>>> Subject: Re: [Ubnt_users] Firmware V6.0
>>>> 
>>>> What is the safest best release to use as of right now?
>>>> 
>>>> Jan V
>>>> 
>>>> On 05/08/2017 05:33 AM, Clay Stewart wrote:
>>>>> v6.0.4 is out... have not switch yet here
>>>>> 
>>>>> On Sun, May 7, 2017 at 10:27 PM, Scott Lambert >>>> <mailto:lamb...@lambertfam.org>> wrote:
>>>>> Just checking, did you also note a drop in modulation to match the drop 
>>>>> in modulation? Just want to make sure the RSSI drop you've observed is 
>>>>> not purely cosmetic.
>>>>> 
>>>>> We are late adopters here, so no experience. 
>>>>> 
>>>>> On May 7, 2017 4:57:42 PM CDT, Nick Bright >>>> <mailto:nick.bri...@valnet.net>> wrote:
>>>>> v6.0 is said to have disassociation problems.
>>>>> 
>>>>> I tested v6.0.3 on several sites with a mix of XM/XW (mostly XM) 2.4GHz 
>>>>> hardware. Mostly RM2 AP units, some BulletM2 units. Mostly AirGrid and 
>>>>> PowerBeam SMs.
>>>>> 
>>>>> It was stable, with no disassociation issues, but we had a non-trivial 
>>>>> number of SM units exhibit a *significant* drop in RX signal strength - 
>>>>> but it was not consistent across the AP. We also showed experimentally 
>>>>> that restoring that one SM

Re: [Ubnt_users] Firmware V6.0

[Gabriel Rincon]

Blake

…..At bottom of email ……


Ubnt_users mailing list

Ubnt_users@wispa.org<mailto:Ubnt_users@wispa.org>

http://lists.wispa.org/mailman/listinfo/ubnt_users



[https://s3.amazonaws.com/ucwebapp.wisestamp.com/e720df06-6b56-42f6-a14c-4eab7271a86d/mobiuslogotransparentCROPPED.format_png.resize_200x.png#logo]
Gabriel E. Rincon

CEO

Mobius Internet, I.T. and Communications



t.

225.490.5600

f.

225.756.1369

e.

gerin...@mobiusisit.com<mailto:gerin...@mobiusisit.com>

w.

http://mobiusisit.com<http://mobiusisit.com/>

a.

4000 S Sherwood Blvd, Ste 110, Baton Rouge, LA 70816


[https://s3.amazonaws.com/images.wisestamp.com/icons_for_colors_32/facebook.png]<http://www.facebook.com/mobiusitc/>
 
[https://s3.amazonaws.com/images.wisestamp.com/icons_for_colors_32/googleplus.png]
 
<http://plus.google.com/u/0/b/106174065372284054783/106174065372284054783/posts>



From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On 
Behalf Of Blake Darling
Sent: Monday, May 8, 2017 2:02 PM
To: Ubiquiti Users Group 
Subject: Re: [Ubnt_users] Firmware V6.0

Please remove me from this thread/group…..

Thanks,

Blake

Blake Darling
President
801 647  Office/Cell
866 566 3827 Fax
bl...@completecommunicationsinc.com<mailto:bl...@completecommunicationsinc.com>
www.completecommunications.com<http://www.completecommunications.com>
http://lnked.in/completecommunicationsinc
Check us out in Enterprise Networking Magazine 2016 SDWWAN Top 10 Companies!
http://www.enterprisenetworkingmag.com/vendor/article9/completecommunications 
Digital Magazine Link:http://www.enterprisenetworkingmag.com/magazines/May/2016/

On May 8, 2017, at 12:10 PM, James Wilson 
mailto:ja...@ridgecomms.com>> wrote:

Odd, UBNT called 6.0.4 beta when they  announced it a non-beta forum...

We've installed 6.0.4 in a few APs and STAs in both bridge and router mode and 
haven't run into any problems.

On May 8, 2017 2:07 PM, "Jan-OOLLC" 
mailto:j.vank...@oregononline.net>> wrote:
So, we can assume v6.0.4 is beta and we are the test subjects?  Can we expect a 
report from whoever is daring enough to deploy?
Jan V
On 05/08/2017 10:52 AM, Ridgetop Networks wrote:
There were issues with stations refusing to reassociate until the AP was 
rebooted up to 6.0.3. So far so good with 6.0.4 for me, but it was infrequent 
enough in 6.0.3 that I can't confidently say it's fixed in 6.0.4.

On Mon, May 8, 2017 at 10:59 AM Jan-OOLLC 
mailto:j.vank...@oregononline.net>> wrote:
was the report of an 18dBm drop in RX an error with v6.0.3?
Jan V
On 05/08/2017 08:47 AM, Clay Stewart wrote:
6.0 was a double edge sword, it did improve some PtMs, but was dropping clients 
randomly. Not seeing that with 6.0.3.

On Mon, May 8, 2017 at 11:40 AM, Troy Gibson, Byhalia.net<http://Byhalia.net> 
mailto:t...@byhalia.net>> wrote:
I am on 5.6.15 for both XM and XW.  So far working well.  Waiting on feedback 
from others on final version 6 updates to use as I did not see good results 
when I tested 6.0 so staying clear for now.

Troy



Sent from my Verizon, Samsung Galaxy smartphone

 Original message 
From: Jan-OOLLC mailto:j.vank...@oregononline.net>>
Date: 5/8/17 11:22 AM (GMT-05:00)
To: ubnt_users@wispa.org<mailto:ubnt_users@wispa.org>
Subject: Re: [Ubnt_users] Firmware V6.0

What is the safest best release to use as of right now?
Jan V
On 05/08/2017 05:33 AM, Clay Stewart wrote:
v6.0.4 is out... have not switch yet here

On Sun, May 7, 2017 at 10:27 PM, Scott Lambert 
mailto:lamb...@lambertfam.org>> wrote:
Just checking, did you also note a drop in modulation to match the drop in 
modulation? Just want to make sure the RSSI drop you've observed is not purely 
cosmetic.

We are late adopters here, so no experience.

On May 7, 2017 4:57:42 PM CDT, Nick Bright 
mailto:nick.bri...@valnet.net>> wrote:
v6.0 is said to have disassociation problems.

I tested v6.0.3 on several sites with a mix of XM/XW (mostly XM) 2.4GHz 
hardware. Mostly RM2 AP units, some BulletM2 units. Mostly AirGrid and 
PowerBeam SMs.

It was stable, with no disassociation issues, but we had a non-trivial number 
of SM units exhibit a *significant* drop in RX signal strength - but it was not 
consistent across the AP. We also showed experimentally that restoring that one 
SM unit back to 5.6.15 (leaving the AP unit at 6.0.3) restored the signal 
strength to the previous level. Some clients lost as much as 18dBm RX strength.

We chose to go back to 5.6.15 at that point.

On 5/6/2017 5:49 PM, Daniel Peoples wrote:
I sent him XW and XM, if anyone else has other versions, send them over.

Daniel Peoples
Resonance Broadband
Resonancebroadband.com<http://resonancebroadband.com/>
918-429-3620

On Sat, May 6, 2017 at 4:02 PM, Eduardo 
mailto:eme...@webjogger.com>> wrote:
We have currently using v5.6.6 and want to try v6.0.3, was told that v6.0 was 
mor

Re: [Ubnt_users] Firmware V6.0

[Ben Buie - Gosuto]

Not a big deal (I actually like these discussions), but I randomly got
added to this discussion list today (I have never seen these emails until
today). I'm wondering if the same thing happened to Blake or others?

On Mon, May 8, 2017 at 3:33 PM, Gabriel Rincon 
wrote:

> Blake
>
>
>
> …..At bottom of email ……
>
>
>
> Ubnt_users mailing list
>
> Ubnt_users@wispa.org
>
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>
>
>
>
>
>
> [image:
> https://s3.amazonaws.com/ucwebapp.wisestamp.com/e720df06-6b56-42f6-a14c-4eab7271a86d/mobiuslogotransparentCROPPED.format_png.resize_200x.png#logo]
>
> *Gabriel E. Rincon*
>
> CEO
>
> Mobius Internet, I.T. and Communications
>
>
>
> t.
>
> 225.490.5600
>
> f.
>
> 225.756.1369
>
> e.
>
> gerin...@mobiusisit.com
>
> w.
>
> http://mobiusisit.com
>
> a.
>
> 4000 S Sherwood Blvd, Ste 110, Baton Rouge, LA 70816
>
> [image:
> https://s3.amazonaws.com/images.wisestamp.com/icons_for_colors_32/facebook.png]
> <http://www.facebook.com/mobiusitc/> [image:
> https://s3.amazonaws.com/images.wisestamp.com/icons_for_colors_32/googleplus.png]
> <http://plus.google.com/u/0/b/106174065372284054783/106174065372284054783/posts>
>
>
>
>
>
> *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org]
> *On Behalf Of *Blake Darling
> *Sent:* Monday, May 8, 2017 2:02 PM
> *To:* Ubiquiti Users Group 
>
> *Subject:* Re: [Ubnt_users] Firmware V6.0
>
>
>
> Please remove me from this thread/group…..
>
>
>
> Thanks,
>
>
>
> Blake
>
>
>
> Blake Darling
> President
> 801 647  <(801)%20647-> Office/Cell
> 866 566 3827 <(866)%20566-3827> Fax
> bl...@completecommunicationsinc.com
> www.completecommunications.com
> http://lnked.in/completecommunicationsinc
> Check us out in Enterprise Networking Magazine 2016 SDWWAN Top
> 10 Companies!
> http://www.enterprisenetworkingmag.com/vendor/article9/
> completecommunications Digital Magazine Link:http://www.
> enterprisenetworkingmag.com/magazines/May/2016/
>
>
>
> On May 8, 2017, at 12:10 PM, James Wilson  wrote:
>
>
>
> Odd, UBNT called 6.0.4 beta when they  announced it a non-beta forum...
>
>
>
> We've installed 6.0.4 in a few APs and STAs in both bridge and router mode
> and haven't run into any problems.
>
>
>
> On May 8, 2017 2:07 PM, "Jan-OOLLC"  wrote:
>
> So, we can assume v6.0.4 is beta and we are the test subjects?  Can we
> expect a report from whoever is daring enough to deploy?
>
> Jan V
>
> On 05/08/2017 10:52 AM, Ridgetop Networks wrote:
>
> There were issues with stations refusing to reassociate until the AP was
> rebooted up to 6.0.3. So far so good with 6.0.4 for me, but it was
> infrequent enough in 6.0.3 that I can't confidently say it's fixed in 6.0.4.
>
>
>
> On Mon, May 8, 2017 at 10:59 AM Jan-OOLLC 
> wrote:
>
> was the report of an 18dBm drop in RX an error with v6.0.3?
>
> Jan V
>
> On 05/08/2017 08:47 AM, Clay Stewart wrote:
>
> 6.0 was a double edge sword, it did improve some PtMs, but was dropping
> clients randomly. Not seeing that with 6.0.3.
>
>
>
> On Mon, May 8, 2017 at 11:40 AM, Troy Gibson, Byhalia.net <
> t...@byhalia.net> wrote:
>
> I am on 5.6.15 for both XM and XW.  So far working well.  Waiting on
> feedback from others on final version 6 updates to use as I did not see
> good results when I tested 6.0 so staying clear for now.
>
>
>
> Troy
>
>
>
>
>
>
>
> Sent from my Verizon, Samsung Galaxy smartphone
>
>
>
>  Original message 
>
> From: Jan-OOLLC 
>
> Date: 5/8/17 11:22 AM (GMT-05:00)
>
> To: ubnt_users@wispa.org
>
> Subject: Re: [Ubnt_users] Firmware V6.0
>
>
>
> What is the safest best release to use as of right now?
>
> Jan V
>
> On 05/08/2017 05:33 AM, Clay Stewart wrote:
>
> v6.0.4 is out... have not switch yet here
>
>
>
> On Sun, May 7, 2017 at 10:27 PM, Scott Lambert 
> wrote:
>
> Just checking, did you also note a drop in modulation to match the drop in
> modulation? Just want to make sure the RSSI drop you've observed is not
> purely cosmetic.
>
> We are late adopters here, so no experience.
>
>
>
> On May 7, 2017 4:57:42 PM CDT, Nick Bright 
> wrote:
>
> v6.0 is said to have disassociation problems.
>
> I tested v6.0.3 on several sites with a mix of XM/XW (mostly XM) 2.4GHz
> hardware. Mostly RM2 AP units, some BulletM2 units. Mostly AirGrid and
> PowerBeam SMs.
>
> It was stable, with no disasso

Re: [Ubnt_users] Firmware V6.0

[Brian Hesterberg via Ubnt_users]

Same here, first day I've gotten em too.Sent from my Verizon Wireless 4G LTE DROIDOn May 8, 2017 2:42 PM, Ben Buie - Gosuto  wrote:Not a big deal (I actually like these discussions), but I randomly got added to this discussion list today (I have never seen these emails until today). I'm wondering if the same thing happened to Blake or others?On Mon, May 8, 2017 at 3:33 PM, Gabriel Rincon <gerincon@mobiusisit.com> wrote:







Blake
 
…..At bottom of email ……
 
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users
 
 
 



Gabriel E. Rincon


CEO


Mobius Internet, I.T. and Communications


 


t.


225.490.5600


f.


225.756.1369


e.


gerincon@mobiusisit.com


w.


http://mobiusisit.com


a.


4000 S Sherwood Blvd, Ste 110, Baton Rouge, LA 70816




 


 

 



From: ubnt_users-bounces@wispa.org [mailto:ubnt_users-bounces@wispa.org]
On Behalf Of Blake Darling
Sent: Monday, May 8, 2017 2:02 PM
To: Ubiquiti Users Group <ubnt_users@wispa.org>
Subject: Re: [Ubnt_users] Firmware V6.0


 
Please remove me from this thread/group…..

 


Thanks, 


 


Blake 


 




Blake Darling
President 
801 647  Office/Cell
866 566 3827 Fax
Blake@completecommunicationsinc.com
www.completecommunications.com
http://lnked.in/completecommunicationsinc
Check us out in Enterprise Networking Magazine 2016 SDWWAN Top 10 Companies!
http://www.enterprisenetworkingmag.com/vendor/article9/completecommunications Digital Magazine Link:http://www.enterprisenetworkingmag.com/magazines/May/2016/


 



On May 8, 2017, at 12:10 PM, James Wilson <james@ridgecomms.com> wrote:

 


Odd, UBNT called 6.0.4 beta when they  announced it a non-beta forum...

 


We've installed 6.0.4 in a few APs and STAs in both bridge and router mode and haven't run into any problems. 



 

On May 8, 2017 2:07 PM, "Jan-OOLLC" <j.vankort@oregononline.net> wrote:


So, we can assume v6.0.4 is beta and we are the test subjects?  Can we expect a report from whoever is daring enough to deploy?

Jan V



On 05/08/2017 10:52 AM, Ridgetop Networks wrote:



There were issues with stations refusing to reassociate until the AP was rebooted up to 6.0.3. So far so good with 6.0.4 for me, but it was infrequent enough in 6.0.3 that I can't confidently say it's fixed in 6.0.4.


 


On Mon, May 8, 2017 at 10:59 AM Jan-OOLLC <j.vankort@oregononline.net> wrote:



was the report of an 18dBm drop in RX an error with v6.0.3? 


Jan V




On 05/08/2017 08:47 AM, Clay Stewart wrote:



6.0 was a double edge sword, it did improve some PtMs, but was dropping clients randomly. Not seeing that with 6.0.3.


 

On Mon, May 8, 2017 at 11:40 AM, Troy Gibson, 
Byhalia.net <troy@byhalia.net> wrote:



I am on 5.6.15 for both XM and XW.  So far working well.  Waiting on feedback from others on final version 6 updates to use as I did not see good results when I tested 6.0 so staying clear for now.


 


Troy


 


 


 



Sent from my Verizon, Samsung Galaxy smartphone





 



 Original message 


From: Jan-OOLLC <j.vankort@oregononline.net>



Date: 5/8/17 11:22 AM (GMT-05:00) 


To: ubnt_users@wispa.org



Subject: Re: [Ubnt_users] Firmware V6.0 


 


What is the safest best release to use as of right now?

Jan V


On 05/08/2017 05:33 AM, Clay Stewart wrote:



v6.0.4 is out... have not switch yet here


 

On Sun, May 7, 2017 at 10:27 PM, Scott Lambert <lambert@lambertfam.org> wrote:


Just checking, did you also note a drop in modulation to match the drop in modulation? Just want to make sure the RSSI drop you've observed is not purely cosmetic.

We are late adopters here, so no experience. 


 

On May 7, 2017 4:57:42 PM CDT, Nick Bright <nick.bright@valnet.net> wrote:



v6.0 is said to have disassociation problems.

I tested v6.0.3 on several sites with a mix of XM/XW (mostly XM) 2.4GHz hardware. Mostly RM2 AP units, some BulletM2 units. Mostly AirGrid and PowerBeam SMs.

It was stable, with no disassociation issues, but we had a non-trivial number of SM units exhibit a *significant* drop in RX signal strength - but it was not consistent across the AP. We also showed experimentally that restoring that one SM unit back to 5.6.15
 (leaving the AP unit at 6.0.3) restored the signal strength to the previous level. Some clients lost as much as 18dBm RX strength.

We chose to go back to 5.6.15 at that point.

On 5/6/2017 5:49 PM, Daniel Peoples wrote:



I sent him XW and XM, if anyone else has other versions, send them over.







Daniel Peoples
Resonance Broadband
Resonancebroadband.com
918-429-3620



 

On Sat, May 6, 2017 at 4:02 PM, Eduardo 

Re: [Ubnt_users] Firmware V6.0

[Caroline Spott]

No, this is the first day for me as well.

Brian Hesterberg via Ubnt_users wrote:

Same here, first day I've gotten em too.

/Sent from my Verizon Wireless 4G LTE DROID/
On May 8, 2017 2:42 PM, Ben Buie - Gosuto  wrote:

Not a big deal (I actually like these discussions), but I randomly
got added to this discussion list today (I have never seen these
emails until today). I'm wondering if the same thing happened to
Blake or others?

On Mon, May 8, 2017 at 3:33 PM, Gabriel Rincon
mailto:gerin...@mobiusisit.com>> wrote:

Blake

…..At bottom of email ……

Ubnt_users mailing list

Ubnt_users@wispa.org  <mailto:Ubnt_users@wispa.org>

http://lists.wispa.org/mailman/listinfo/ubnt_users  
<http://lists.wispa.org/mailman/listinfo/ubnt_users>


https://s3.amazonaws.com/ucwebapp.wisestamp.com/e720df06-6b56-42f6-a14c-4eab7271a86d/mobiuslogotransparentCROPPED.format_png.resize_200x.png#logo

*Gabriel E. Rincon*



CEO



Mobius Internet, I.T. and Communications





t.




225.490.5600



f.




225.756.1369



e.




gerin...@mobiusisit.com <mailto:gerin...@mobiusisit.com>



w.




http://mobiusisit.com <http://mobiusisit.com/>



a.




4000 S Sherwood Blvd, Ste 110, Baton Rouge, LA 70816






https://s3.amazonaws.com/images.wisestamp.com/icons_for_colors_32/facebook.png
<http://www.facebook.com/mobiusitc/>

https://s3.amazonaws.com/images.wisestamp.com/icons_for_colors_32/googleplus.png

<http://plus.google.com/u/0/b/106174065372284054783/106174065372284054783/posts>



*From:* ubnt_users-boun...@wispa.org
<mailto:ubnt_users-boun...@wispa.org>
[mailto:ubnt_users-boun...@wispa.org
<mailto:ubnt_users-boun...@wispa.org>] *On Behalf Of *Blake
Darling
*Sent:* Monday, May 8, 2017 2:02 PM
*To:* Ubiquiti Users Group mailto:ubnt_users@wispa.org>>


*Subject:* Re: [Ubnt_users] Firmware V6.0

Please remove me from this thread/group…..

Thanks,

Blake

Blake Darling
President
801 647  Office/Cell
866 566 3827 Fax
bl...@completecommunicationsinc.com
<mailto:bl...@completecommunicationsinc.com>
www.completecommunications.com
<http://www.completecommunications.com>
http://lnked.in/completecommunicationsinc
<http://lnked.in/completecommunicationsinc>
Check us out in Enterprise Networking Magazine 2016 SDWWAN Top
10 Companies!

http://www.enterprisenetworkingmag.com/vendor/article9/completecommunications

<http://www.enterprisenetworkingmag.com/vendor/article9/completecommunications> 
Digital
Magazine Link:http://www.enterprisenetworkingmag.com/magazines/May/2016/
<http://www.enterprisenetworkingmag.com/magazines/May/2016/>

On May 8, 2017, at 12:10 PM, James Wilson
mailto:ja...@ridgecomms.com>> wrote:

Odd, UBNT called 6.0.4 beta when they  announced it a
non-beta forum...

We've installed 6.0.4 in a few APs and STAs in both bridge
and router mode and haven't run into any problems.

On May 8, 2017 2:07 PM, "Jan-OOLLC"
mailto:j.vank...@oregononline.net>> wrote:

So, we can assume v6.0.4 is beta and we are the test
subjects?  Can we expect a report from whoever is
daring enough to deploy?

Jan V

On 05/08/2017 10:52 AM, Ridgetop Networks wrote:

There were issues with stations refusing to
reassociate until the AP was rebooted up to 6.0.3.
So far so good with 6.0.4 for me, but it was
infrequent enough in 6.0.3 that I can't
confidently say it's fixed in 6.0.4.

On Mon, May 8, 2017 at 10:59 AM Jan-OOLLC
mailto:j.vank...@oregononline.net>> wrote:

was the report of an 18dBm drop in RX an error
with v6.0.3?

Jan V

On 05/08/2017 08:47 AM, Clay Stewart wrote:

6.0 was a double edge sword, it did
improve some PtMs, but was dropping
clients randomly. 

Re: [Ubnt_users] Firmware V6.0

[Scott Monarco]

Please remove me as well
Scott
From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On 
Behalf Of Christian Hilliard
Sent: Monday, May 8, 2017 1:32 PM
To: Ubiquiti Users Group 
Subject: Re: [Ubnt_users] Firmware V6.0

Please remove me as well..
Thank you
Christian Hilliard
Founder
308-698-1444
chris.hilli...@usacommunications.tv<mailto:chris.hilli...@usacommunications.tv>
USACommunications.tv<http://usacommunications.tv/>

On May 8, 2017, at 2:02 PM, Blake Darling 
mailto:bl...@completecommunicationsinc.com>>
 wrote:

Please remove me from this thread/group…..

Thanks,

Blake

Blake Darling
President
801 647  Office/Cell
866 566 3827 Fax
bl...@completecommunicationsinc.com<mailto:bl...@completecommunicationsinc.com>
www.completecommunications.com<http://www.completecommunications.com>
http://lnked.in/completecommunicationsinc
Check us out in Enterprise Networking Magazine 2016 SDWWAN Top 10 Companies!
http://www.enterprisenetworkingmag.com/vendor/article9/completecommunications 
Digital Magazine Link:http://www.enterprisenetworkingmag.com/magazines/May/2016/

On May 8, 2017, at 12:10 PM, James Wilson 
mailto:ja...@ridgecomms.com>> wrote:

Odd, UBNT called 6.0.4 beta when they  announced it a non-beta forum...

We've installed 6.0.4 in a few APs and STAs in both bridge and router mode and 
haven't run into any problems.

On May 8, 2017 2:07 PM, "Jan-OOLLC" 
mailto:j.vank...@oregononline.net>> wrote:
So, we can assume v6.0.4 is beta and we are the test subjects?  Can we expect a 
report from whoever is daring enough to deploy?
Jan V
On 05/08/2017 10:52 AM, Ridgetop Networks wrote:
There were issues with stations refusing to reassociate until the AP was 
rebooted up to 6.0.3. So far so good with 6.0.4 for me, but it was infrequent 
enough in 6.0.3 that I can't confidently say it's fixed in 6.0.4.

On Mon, May 8, 2017 at 10:59 AM Jan-OOLLC 
mailto:j.vank...@oregononline.net>> wrote:
was the report of an 18dBm drop in RX an error with v6.0.3?
Jan V
On 05/08/2017 08:47 AM, Clay Stewart wrote:
6.0 was a double edge sword, it did improve some PtMs, but was dropping clients 
randomly. Not seeing that with 6.0.3.

On Mon, May 8, 2017 at 11:40 AM, Troy Gibson, Byhalia.net<http://byhalia.net/> 
mailto:t...@byhalia.net>> wrote:
I am on 5.6.15 for both XM and XW.  So far working well.  Waiting on feedback 
from others on final version 6 updates to use as I did not see good results 
when I tested 6.0 so staying clear for now.

Troy



Sent from my Verizon, Samsung Galaxy smartphone

 Original message 
From: Jan-OOLLC mailto:j.vank...@oregononline.net>>
Date: 5/8/17 11:22 AM (GMT-05:00)
To: ubnt_users@wispa.org<mailto:ubnt_users@wispa.org>
Subject: Re: [Ubnt_users] Firmware V6.0

What is the safest best release to use as of right now?
Jan V
On 05/08/2017 05:33 AM, Clay Stewart wrote:
v6.0.4 is out... have not switch yet here

On Sun, May 7, 2017 at 10:27 PM, Scott Lambert 
mailto:lamb...@lambertfam.org>> wrote:
Just checking, did you also note a drop in modulation to match the drop in 
modulation? Just want to make sure the RSSI drop you've observed is not purely 
cosmetic.

We are late adopters here, so no experience.

On May 7, 2017 4:57:42 PM CDT, Nick Bright 
mailto:nick.bri...@valnet.net>> wrote:
v6.0 is said to have disassociation problems.

I tested v6.0.3 on several sites with a mix of XM/XW (mostly XM) 2.4GHz 
hardware. Mostly RM2 AP units, some BulletM2 units. Mostly AirGrid and 
PowerBeam SMs.

It was stable, with no disassociation issues, but we had a non-trivial number 
of SM units exhibit a *significant* drop in RX signal strength - but it was not 
consistent across the AP. We also showed experimentally that restoring that one 
SM unit back to 5.6.15 (leaving the AP unit at 6.0.3) restored the signal 
strength to the previous level. Some clients lost as much as 18dBm RX strength.

We chose to go back to 5.6.15 at that point.

On 5/6/2017 5:49 PM, Daniel Peoples wrote:
I sent him XW and XM, if anyone else has other versions, send them over.

Daniel Peoples
Resonance Broadband
Resonancebroadband.com<http://resonancebroadband.com/>
918-429-3620

On Sat, May 6, 2017 at 4:02 PM, Eduardo 
mailto:eme...@webjogger.com>> wrote:
We have currently using v5.6.6 and want to try v6.0.3, was told that v6.0 was 
more stable.

Does someone have the v6.0 firmware?



___
Ubnt_users mailing list
Ubnt_users@wispa.org<mailto:Ubnt_users@wispa.org>
http://lists.wispa.org/mailman/listinfo/ubnt_users




___

Ubnt_users mailing list

Ubnt_users@wispa.org<mailto:Ubnt_users@wispa.org>

http://lists.wispa.org/mailman/listinfo/ubnt_users



--

---

-  Nick Bright-

-  Vice Presiden

Re: [Ubnt_users] Firmware V6.0

[Aram Ter-Martirosyan]

Please remove me from the list

 

Aram Ter-Martirosyan

ConnectTo Communications

http://www.ConnectTo.com <http://www.connectto.com/> 

555 Riverdale, Suite A

Glendale, CA 91204

a...@connectto.com

tel 818.546.4601

fax 818.546.4617

 

From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On 
Behalf Of Scott Monarco
Sent: Monday, May 08, 2017 1:14 PM
To: Ubiquiti Users Group
Subject: Re: [Ubnt_users] Firmware V6.0

 

Please remove me as well

Scott  

From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On 
Behalf Of Christian Hilliard
Sent: Monday, May 8, 2017 1:32 PM
To: Ubiquiti Users Group 
Subject: Re: [Ubnt_users] Firmware V6.0

 

Please remove me as well..

Thank you

Christian Hilliard

Founder

308-698-1444

chris.hilli...@usacommunications.tv

 <http://usacommunications.tv/> USACommunications.tv

 

On May 8, 2017, at 2:02 PM, Blake Darling  
wrote:

 

Please remove me from this thread/group…..

 

Thanks, 

 

Blake 

 

Blake Darling
President 
801 647  Office/Cell
866 566 3827 Fax
bl...@completecommunicationsinc.com
www.completecommunications.com
http://lnked.in/completecommunicationsinc
Check us out in Enterprise Networking Magazine 2016 SDWWAN Top 10 Companies!
http://www.enterprisenetworkingmag.com/vendor/article9/completecommunications 
Digital Magazine Link:http://www.enterprisenetworkingmag.com/magazines/May/2016/

 

On May 8, 2017, at 12:10 PM, James Wilson  wrote:

 

Odd, UBNT called 6.0.4 beta when they  announced it a non-beta forum...

 

We've installed 6.0.4 in a few APs and STAs in both bridge and router mode and 
haven't run into any problems. 

 

On May 8, 2017 2:07 PM, "Jan-OOLLC"  wrote:

So, we can assume v6.0.4 is beta and we are the test subjects?  Can we expect a 
report from whoever is daring enough to deploy?

Jan V

On 05/08/2017 10:52 AM, Ridgetop Networks wrote:

There were issues with stations refusing to reassociate until the AP was 
rebooted up to 6.0.3. So far so good with 6.0.4 for me, but it was infrequent 
enough in 6.0.3 that I can't confidently say it's fixed in 6.0.4.

 

On Mon, May 8, 2017 at 10:59 AM Jan-OOLLC  wrote:

was the report of an 18dBm drop in RX an error with v6.0.3?  

Jan V

On 05/08/2017 08:47 AM, Clay Stewart wrote:

6.0 was a double edge sword, it did improve some PtMs, but was dropping clients 
randomly. Not seeing that with 6.0.3.

 

On Mon, May 8, 2017 at 11:40 AM, Troy Gibson, Byhalia.net <http://byhalia.net/> 
  wrote:

I am on 5.6.15 for both XM and XW.  So far working well.  Waiting on feedback 
from others on final version 6 updates to use as I did not see good results 
when I tested 6.0 so staying clear for now.

 

Troy

 

 

 

Sent from my Verizon, Samsung Galaxy smartphone

 

 Original message 

From: Jan-OOLLC  

Date: 5/8/17 11:22 AM (GMT-05:00) 

To: ubnt_users@wispa.org 

Subject: Re: [Ubnt_users] Firmware V6.0 

 

What is the safest best release to use as of right now?

Jan V

On 05/08/2017 05:33 AM, Clay Stewart wrote:

v6.0.4 is out... have not switch yet here

 

On Sun, May 7, 2017 at 10:27 PM, Scott Lambert  wrote:

Just checking, did you also note a drop in modulation to match the drop in 
modulation? Just want to make sure the RSSI drop you've observed is not purely 
cosmetic.

We are late adopters here, so no experience. 

 

On May 7, 2017 4:57:42 PM CDT, Nick Bright  wrote: 

v6.0 is said to have disassociation problems.

I tested v6.0.3 on several sites with a mix of XM/XW (mostly XM) 2.4GHz 
hardware. Mostly RM2 AP units, some BulletM2 units. Mostly AirGrid and 
PowerBeam SMs.

It was stable, with no disassociation issues, but we had a non-trivial number 
of SM units exhibit a *significant* drop in RX signal strength - but it was not 
consistent across the AP. We also showed experimentally that restoring that one 
SM unit back to 5.6.15 (leaving the AP unit at 6.0.3) restored the signal 
strength to the previous level. Some clients lost as much as 18dBm RX strength.

We chose to go back to 5.6.15 at that point.

On 5/6/2017 5:49 PM, Daniel Peoples wrote:

I sent him XW and XM, if anyone else has other versions, send them over.




Daniel Peoples
Resonance Broadband

 <http://resonancebroadband.com/> Resonancebroadband.com
918-429-3620

 

On Sat, May 6, 2017 at 4:02 PM, Eduardo  wrote:

We have currently using v5.6.6 and want to try v6.0.3, was told that v6.0 was 
more stable.

 

Does someone have the v6.0 firmware?

 

 


___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

 

 

___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

 

 

-- 
---
-  Nick Bright-
-  Vice President of Technology

Re: [Ubnt_users] Firmware V6.0

[Mike Hammett]

Asking to be removed from the list won't actually remove you from the list. 

Login to your WISPA account and adjust it there. 




- 
Mike Hammett 
Intelligent Computing Solutions 

Midwest Internet Exchange 

The Brothers WISP 

- Original Message -

From: "Aram Ter-Martirosyan"  
To: "Ubiquiti Users Group"  
Sent: Monday, May 8, 2017 3:15:32 PM 
Subject: Re: [Ubnt_users] Firmware V6.0 



Please remove me from the list 


Aram Ter-Martirosyan 
ConnectTo Communications 
http://www.ConnectTo.com 
555 Riverdale, Suite A 
Glendale, CA 91204 
a...@connectto.com 
tel 818.546.4601 
fax 818.546.4617 



From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On 
Behalf Of Scott Monarco 
Sent: Monday, May 08, 2017 1:14 PM 
To: Ubiquiti Users Group 
Subject: Re: [Ubnt_users] Firmware V6.0 

Please remove me as well 
Scott 


From: ubnt_users-boun...@wispa.org [ mailto:ubnt_users-boun...@wispa.org ] On 
Behalf Of Christian Hilliard 
Sent: Monday, May 8, 2017 1:32 PM 
To: Ubiquiti Users Group < ubnt_users@wispa.org > 
Subject: Re: [Ubnt_users] Firmware V6.0 

Please remove me as well.. 

Thank you 

Christian Hilliard 



Founder 

308-698-1444 

chris.hilli...@usacommunications.tv 

USA Communications . tv 





On May 8, 2017, at 2:02 PM, Blake Darling < bl...@completecommunicationsinc.com 
> wrote: 



Please remove me from this thread/group….. 



Thanks, 



Blake 





Blake Darling 
President 
801 647  Office/Cell 
866 566 3827 Fax 
bl...@completecommunicationsinc.com 
www.completecommunications.com 
http://lnked.in/completecommunicationsinc 
Check us out in Enterprise Networking Magazine 2016 SDWWAN Top 10 Companies! 
http://www.enterprisenetworkingmag.com/vendor/article9/completecommunications 
Digital Magazine Link: 
http://www.enterprisenetworkingmag.com/magazines/May/2016/ 





On May 8, 2017, at 12:10 PM, James Wilson < ja...@ridgecomms.com > wrote: 



Odd, UBNT called 6.0.4 beta when they announced it a non-beta forum... 



We've installed 6.0.4 in a few APs and STAs in both bridge and router mode and 
haven't run into any problems. 



On May 8, 2017 2:07 PM, "Jan-OOLLC" < j.vank...@oregononline.net > wrote: 



So, we can assume v6.0.4 is beta and we are the test subjects? Can we expect a 
report from whoever is daring enough to deploy? 

Jan V 


On 05/08/2017 10:52 AM, Ridgetop Networks wrote: 



There were issues with stations refusing to reassociate until the AP was 
rebooted up to 6.0.3. So far so good with 6.0.4 for me, but it was infrequent 
enough in 6.0.3 that I can't confidently say it's fixed in 6.0.4. 




On Mon, May 8, 2017 at 10:59 AM Jan-OOLLC < j.vank...@oregononline.net > wrote: 



was the report of an 18dBm drop in RX an error with v6.0.3? 

Jan V 


On 05/08/2017 08:47 AM, Clay Stewart wrote: 



6.0 was a double edge sword, it did improve some PtMs, but was dropping clients 
randomly. Not seeing that with 6.0.3. 



On Mon, May 8, 2017 at 11:40 AM, Troy Gibson, Byhalia.net < t...@byhalia.net > 
wrote: 




I am on 5.6.15 for both XM and XW. So far working well. Waiting on feedback 
from others on final version 6 updates to use as I did not see good results 
when I tested 6.0 so staying clear for now. 



Troy 








Sent from my Verizon, Samsung Galaxy smartphone 






 Original message  

From: Jan-OOLLC < j.vank...@oregononline.net > 

Date: 5/8/17 11:22 AM (GMT-05:00) 

To: ubnt_users@wispa.org 

Subject: Re: [Ubnt_users] Firmware V6.0 


What is the safest best release to use as of right now? 

Jan V 

On 05/08/2017 05:33 AM, Clay Stewart wrote: 



v6.0.4 is out... have not switch yet here 



On Sun, May 7, 2017 at 10:27 PM, Scott Lambert < lamb...@lambertfam.org > 
wrote: 



Just checking, did you also note a drop in modulation to match the drop in 
modulation? Just want to make sure the RSSI drop you've observed is not purely 
cosmetic. 

We are late adopters here, so no experience. 




On May 7, 2017 4:57:42 PM CDT, Nick Bright < nick.bri...@valnet.net > wrote: 



v6.0 is said to have disassociation problems. 

I tested v6.0.3 on several sites with a mix of XM/XW (mostly XM) 2.4GHz 
hardware. Mostly RM2 AP units, some BulletM2 units. Mostly AirGrid and 
PowerBeam SMs. 

It was stable, with no disassociation issues, but we had a non-trivial number 
of SM units exhibit a *significant* drop in RX signal strength - but it was not 
consistent across the AP. We also showed experimentally that restoring that one 
SM unit back to 5.6.15 (leaving the AP unit at 6.0.3) restored the signal 
strength to the previous level. Some clients lost as much as 18dBm RX strength. 

We chose to go back to 5.6.15 at that point. 

On 5/6/2017 5:49 PM, Daniel Peoples wrote: 



I sent him XW and XM, if anyone else has other versions, send them over. 






Daniel Peoples 
Resonance Broadband 
Resonancebroadband.com 
918-

Re: [Ubnt_users] Firmware V6.0

[Josh Luthman]

List-Id: Ubiquiti Users Group 
List-Unsubscribe: <http://lists.wispa.org/mailman/listinfo/ubnt_users>,
<mailto:ubnt_users-requ...@wispa.org?subject=unsubscribe>



Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373

On Mon, May 8, 2017 at 4:15 PM, Aram Ter-Martirosyan 
wrote:

> Please remove me from the list
>
>
>
> Aram Ter-Martirosyan
>
> ConnectTo Communications
>
> http://www.ConnectTo.com <http://www.connectto.com/>
>
> 555 Riverdale, Suite A
>
> Glendale, CA 91204
>
> a...@connectto.com
>
> tel 818.546.4601 <(818)%20546-4601>
>
> fax 818.546.4617 <(818)%20546-4617>
>
>
>
> *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org]
> *On Behalf Of *Scott Monarco
> *Sent:* Monday, May 08, 2017 1:14 PM
> *To:* Ubiquiti Users Group
>
> *Subject:* Re: [Ubnt_users] Firmware V6.0
>
>
>
> Please remove me as well
>
> Scott
>
> *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org
> ] *On Behalf Of *Christian Hilliard
> *Sent:* Monday, May 8, 2017 1:32 PM
> *To:* Ubiquiti Users Group 
> *Subject:* Re: [Ubnt_users] Firmware V6.0
>
>
>
> Please remove me as well..
>
> Thank you
>
> Christian Hilliard
>
> *Founder*
>
> *308-698-1444 <(308)%20698-1444>*
>
> chris.hilli...@usacommunications.tv
>
> *USA*Communications.tv <http://usacommunications.tv/>
>
>
>
> On May 8, 2017, at 2:02 PM, Blake Darling  completecommunicationsinc.com> wrote:
>
>
>
> Please remove me from this thread/group…..
>
>
>
> Thanks,
>
>
>
> Blake
>
>
>
> Blake Darling
> President
> 801 647  <(801)%20647-> Office/Cell
> 866 566 3827 <(866)%20566-3827> Fax
> bl...@completecommunicationsinc.com
> www.completecommunications.com
> http://lnked.in/completecommunicationsinc
> Check us out in Enterprise Networking Magazine 2016 SDWWAN Top
> 10 Companies!
> http://www.enterprisenetworkingmag.com/vendor/article9/
> completecommunications Digital Magazine Link:http://www.
> enterprisenetworkingmag.com/magazines/May/2016/
>
>
>
> On May 8, 2017, at 12:10 PM, James Wilson  wrote:
>
>
>
> Odd, UBNT called 6.0.4 beta when they  announced it a non-beta forum...
>
>
>
> We've installed 6.0.4 in a few APs and STAs in both bridge and router mode
> and haven't run into any problems.
>
>
>
> On May 8, 2017 2:07 PM, "Jan-OOLLC"  wrote:
>
> So, we can assume v6.0.4 is beta and we are the test subjects?  Can we
> expect a report from whoever is daring enough to deploy?
>
> Jan V
>
> On 05/08/2017 10:52 AM, Ridgetop Networks wrote:
>
> There were issues with stations refusing to reassociate until the AP was
> rebooted up to 6.0.3. So far so good with 6.0.4 for me, but it was
> infrequent enough in 6.0.3 that I can't confidently say it's fixed in 6.0.4.
>
>
>
> On Mon, May 8, 2017 at 10:59 AM Jan-OOLLC 
> wrote:
>
> was the report of an 18dBm drop in RX an error with v6.0.3?
>
> Jan V
>
> On 05/08/2017 08:47 AM, Clay Stewart wrote:
>
> 6.0 was a double edge sword, it did improve some PtMs, but was dropping
> clients randomly. Not seeing that with 6.0.3.
>
>
>
> On Mon, May 8, 2017 at 11:40 AM, Troy Gibson, Byhalia.net
> <http://byhalia.net/>  wrote:
>
> I am on 5.6.15 for both XM and XW.  So far working well.  Waiting on
> feedback from others on final version 6 updates to use as I did not see
> good results when I tested 6.0 so staying clear for now.
>
>
>
> Troy
>
>
>
>
>
>
>
> Sent from my Verizon, Samsung Galaxy smartphone
>
>
>
>  Original message 
>
> From: Jan-OOLLC 
>
> Date: 5/8/17 11:22 AM (GMT-05:00)
>
> To: ubnt_users@wispa.org
>
> Subject: Re: [Ubnt_users] Firmware V6.0
>
>
>
> What is the safest best release to use as of right now?
>
> Jan V
>
> On 05/08/2017 05:33 AM, Clay Stewart wrote:
>
> v6.0.4 is out... have not switch yet here
>
>
>
> On Sun, May 7, 2017 at 10:27 PM, Scott Lambert 
> wrote:
>
> Just checking, did you also note a drop in modulation to match the drop in
> modulation? Just want to make sure the RSSI drop you've observed is not
> purely cosmetic.
>
> We are late adopters here, so no experience.
>
>
>
> On May 7, 2017 4:57:42 PM CDT, Nick Bright 
> wrote:
>
> v6.0 is said to have disassociation problems.
>
> I tested v6.0.3 on several sites with a mix of XM/XW (mostly XM) 2.4GHz
> hardware. Mostly RM2 AP units, some BulletM2 units. Mostly AirGrid an

Re: [Ubnt_users] Firmware V6.0

[Brian Hesterberg via Ubnt_users]

People. PAY ATTENTION. At some point you all signed up for this. Now it's on YOU to remove yourself. YOU must remove yourself. Log in and make the necessary changes.Sent from my Verizon Wireless 4G LTE DROIDOn May 8, 2017 3:15 PM, Aram Ter-Martirosyan  wrote:    Please remove me from the list Aram Ter-MartirosyanConnectTo Communicationshttp://www.ConnectTo.com555 Riverdale, Suite AGlendale, CA 91204aram@ConnectTo.comtel 818.546.4601fax 818.546.4617 From: ubnt_users-bounces@wispa.org [mailto:ubnt_users-bounces@wispa.org] On Behalf Of Scott MonarcoSent: Monday, May 08, 2017 1:14 PMTo: Ubiquiti Users GroupSubject: Re: [Ubnt_users] Firmware V6.0 Please remove me as wellScott  From: ubnt_users-bounces@wispa.org [mailto:ubnt_users-bounces@wispa.org] On Behalf Of Christian HilliardSent: Monday, May 8, 2017 1:32 PMTo: Ubiquiti Users Group <ubnt_users@wispa.org>Subject: Re: [Ubnt_users] Firmware V6.0 Please remove me as well..Thank youChristian HilliardFounder308-698-1444Chris.Hilliard@USACommunications.tvUSACommunications.tv On May 8, 2017, at 2:02 PM, Blake Darling <blake@completecommunicationsinc.com> wrote: Please remove me from this thread/group….. Thanks,  Blake  Blake DarlingPresident 801 647  Office/Cell866 566 3827 FaxBlake@completecommunicationsinc.comwww.completecommunications.comhttp://lnked.in/completecommunicationsincCheck us out in Enterprise Networking Magazine 2016 SDWWAN Top 10 Companies!http://www.enterprisenetworkingmag.com/vendor/article9/completecommunications Digital Magazine Link:http://www.enterprisenetworkingmag.com/magazines/May/2016/ On May 8, 2017, at 12:10 PM, James Wilson <james@ridgecomms.com> wrote: Odd, UBNT called 6.0.4 beta when they  announced it a non-beta forum... We've installed 6.0.4 in a few APs and STAs in both bridge and router mode and haven't run into any problems.  On May 8, 2017 2:07 PM, "Jan-OOLLC" <j.vankort@oregononline.net> wrote:So, we can assume v6.0.4 is beta and we are the test subjects?  Can we expect a report from whoever is daring enough to deploy?Jan VOn 05/08/2017 10:52 AM, Ridgetop Networks wrote:There were issues with stations refusing to reassociate until the AP was rebooted up to 6.0.3. So far so good with 6.0.4 for me, but it was infrequent enough in 6.0.3 that I can't confidently say it's fixed in 6.0.4. On Mon, May 8, 2017 at 10:59 AM Jan-OOLLC <j.vankort@oregononline.net> wrote:was the report of an 18dBm drop in RX an error with v6.0.3?  Jan VOn 05/08/2017 08:47 AM, Clay Stewart wrote:6.0 was a double edge sword, it did improve some PtMs, but was dropping clients randomly. Not seeing that with 6.0.3. On Mon, May 8, 2017 at 11:40 AM, Troy Gibson, Byhalia.net <troy@byhalia.net> wrote:I am on 5.6.15 for both XM and XW.  So far working well.  Waiting on feedback from others on final version 6 updates to use as I did not see good results when I tested 6.0 so staying clear for now. Troy   Sent from my Verizon, Samsung Galaxy smartphone  Original message From: Jan-OOLLC <j.vankort@oregononline.net> Date: 5/8/17 11:22 AM (GMT-05:00) To: ubnt_users@wispa.org Subject: Re: [Ubnt_users] Firmware V6.0  What is the safest best release to use as of right now?Jan VOn 05/08/2017 05:33 AM, Clay Stewart wrote:v6.0.4 is out... have not switch yet here On Sun, May 7, 2017 at 10:27 PM, Scott Lambert <lambert@lambertfam.org> wrote:Just checking, did you also note a drop in modulation to match the drop in modulation? Just want to make sure the RSSI drop you've observed is not purely cosmetic.We are late adopters here, so no experience.  On May 7, 2017 4:57:42 PM CDT, Nick Bright <nick.bright@valnet.net> wrote: v6.0 is said to have disassociation problems.I tested v6.0.3 on several sites with a mix of XM/XW (mostly XM) 2.4GHz hardware. Mostly RM2 AP units, some BulletM2 units. Mostly AirGrid and PowerBeam SMs.It was stable, with no disassociation issues, but we had a non-trivial number of SM units exhibit a *significant* drop in RX signal strength - but it was not consistent across the AP. We also showed experimentally that restoring that one SM unit back to 5.6.15 (leaving the AP unit at 6.0.3) restored the signal strength to the previous level. Some clients lost as much as 18dBm RX strength.We chose to go back to 5.6.15 at that point.On 5/6/2017 5:49 PM, Daniel Peoples wrote:I sent him XW and XM, if anyone else has other versions, send them over.Daniel PeoplesResonance BroadbandResonancebroadband.com918-429-3620 On Sat, May 6, 2017 at 4:02 PM, Eduardo <emejia@webjogger.com> wrote:We have currently using v5.6.6 and want to try v6.0.3, was told that v6.0 was more stable. Does someone have the v6.0 firmware?  ___Ubnt_users mailing listUbnt_users@wispa.orghttp://lists.wispa.org/mailman/listinfo/ubnt_users  

Re: [Ubnt_users] Firmware V6.0

[Mike Hammett]

That doesn't work. WISPA is the only mailman mailing list I know of that 
doesn't work for. 




- 
Mike Hammett 
Intelligent Computing Solutions 

Midwest Internet Exchange 

The Brothers WISP 

- Original Message -

From: "Josh Luthman"  
To: "Ubiquiti Users Group"  
Sent: Monday, May 8, 2017 3:21:40 PM 
Subject: Re: [Ubnt_users] Firmware V6.0 



List-Id: Ubiquiti Users Group < ubnt_users.wispa.org > 
List-Unsubscribe: < http://lists.wispa.org/mailman/listinfo/ubnt_users >, 
 








Josh Luthman 
Office: 937-552-2340 
Direct: 937-552-2343 
1100 Wayne St 
Suite 1337 
Troy, OH 45373 

On Mon, May 8, 2017 at 4:15 PM, Aram Ter-Martirosyan < a...@connectto.com > 
wrote: 





Please remove me from the list 


Aram Ter-Martirosyan 
ConnectTo Communications 
http://www.ConnectTo.com 
555 Riverdale, Suite A 
Glendale, CA 91204 
a...@connectto.com 
tel 818.546.4601 
fax 818.546.4617 



From: ubnt_users-boun...@wispa.org [mailto: ubnt_users-boun...@wispa.org ] On 
Behalf Of Scott Monarco 
Sent: Monday, May 08, 2017 1:14 PM 
To: Ubiquiti Users Group 


Subject: Re: [Ubnt_users] Firmware V6.0 




Please remove me as well 
Scott 


From: ubnt_users-boun...@wispa.org [ mailto:ubnt_users-boun...@wispa.org ] On 
Behalf Of Christian Hilliard 
Sent: Monday, May 8, 2017 1:32 PM 
To: Ubiquiti Users Group < ubnt_users@wispa.org > 
Subject: Re: [Ubnt_users] Firmware V6.0 

Please remove me as well.. 

Thank you 

Christian Hilliard 



Founder 

308-698-1444 

chris.hilli...@usacommunications.tv 

USA Communications . tv 





On May 8, 2017, at 2:02 PM, Blake Darling < bl...@completecommunicationsinc.com 
> wrote: 



Please remove me from this thread/group….. 



Thanks, 



Blake 





Blake Darling 
President 
801 647  Office/Cell 
866 566 3827 Fax 
bl...@completecommunicationsinc.com 
www.completecommunications.com 
http://lnked.in/completecommunicationsinc 
Check us out in Enterprise Networking Magazine 2016 SDWWAN Top 10 Companies! 
http://www.enterprisenetworkingmag.com/vendor/article9/completecommunications 
Digital Magazine Link: 
http://www.enterprisenetworkingmag.com/magazines/May/2016/ 





On May 8, 2017, at 12:10 PM, James Wilson < ja...@ridgecomms.com > wrote: 



Odd, UBNT called 6.0.4 beta when they announced it a non-beta forum... 



We've installed 6.0.4 in a few APs and STAs in both bridge and router mode and 
haven't run into any problems. 



On May 8, 2017 2:07 PM, "Jan-OOLLC" < j.vank...@oregononline.net > wrote: 



So, we can assume v6.0.4 is beta and we are the test subjects? Can we expect a 
report from whoever is daring enough to deploy? 

Jan V 


On 05/08/2017 10:52 AM, Ridgetop Networks wrote: 



There were issues with stations refusing to reassociate until the AP was 
rebooted up to 6.0.3. So far so good with 6.0.4 for me, but it was infrequent 
enough in 6.0.3 that I can't confidently say it's fixed in 6.0.4. 




On Mon, May 8, 2017 at 10:59 AM Jan-OOLLC < j.vank...@oregononline.net > wrote: 



was the report of an 18dBm drop in RX an error with v6.0.3? 

Jan V 


On 05/08/2017 08:47 AM, Clay Stewart wrote: 



6.0 was a double edge sword, it did improve some PtMs, but was dropping clients 
randomly. Not seeing that with 6.0.3. 



On Mon, May 8, 2017 at 11:40 AM, Troy Gibson, Byhalia.net < t...@byhalia.net > 
wrote: 




I am on 5.6.15 for both XM and XW. So far working well. Waiting on feedback 
from others on final version 6 updates to use as I did not see good results 
when I tested 6.0 so staying clear for now. 



Troy 








Sent from my Verizon, Samsung Galaxy smartphone 






 Original message  

From: Jan-OOLLC < j.vank...@oregononline.net > 

Date: 5/8/17 11:22 AM (GMT-05:00) 

To: ubnt_users@wispa.org 

Subject: Re: [Ubnt_users] Firmware V6.0 


What is the safest best release to use as of right now? 

Jan V 

On 05/08/2017 05:33 AM, Clay Stewart wrote: 



v6.0.4 is out... have not switch yet here 



On Sun, May 7, 2017 at 10:27 PM, Scott Lambert < lamb...@lambertfam.org > 
wrote: 



Just checking, did you also note a drop in modulation to match the drop in 
modulation? Just want to make sure the RSSI drop you've observed is not purely 
cosmetic. 

We are late adopters here, so no experience. 




On May 7, 2017 4:57:42 PM CDT, Nick Bright < nick.bri...@valnet.net > wrote: 



v6.0 is said to have disassociation problems. 

I tested v6.0.3 on several sites with a mix of XM/XW (mostly XM) 2.4GHz 
hardware. Mostly RM2 AP units, some BulletM2 units. Mostly AirGrid and 
PowerBeam SMs. 

It was stable, with no disassociation issues, but we had a non-trivial number 
of SM units exhibit a *significant* drop in RX signal strength - but it was not 
consistent across the AP. We also showed experimentally that restoring that one 
SM unit back to 5.6.15 (leaving the AP unit at 6.0.3) restored the signal 
str

Re: [Ubnt_users] Firmware V6.0

[Craig Mason]

I did not have UBNT selected in my WISPA list, yet I started receiving these 
emails today. I logged on to my WISPA account and verified that I was still not 
supposed to be receiving these emails, yet I still am.



Thank you,
Craig Mason
www.verticalbroadband.com<http://www.verticalbroadband.com>

From: mailto:ubnt_users-boun...@wispa.org>> on 
behalf of Mike Hammett 
mailto:wispaubntus...@ics-il.net>>
Reply-To: Ubiquiti Users Group 
mailto:ubnt_users@wispa.org>>
Date: Monday, May 8, 2017 at 12:21 PM
To: Ubiquiti Users Group mailto:ubnt_users@wispa.org>>
Subject: Re: [Ubnt_users] Firmware V6.0

Asking to be removed from the list won't actually remove you from the list.

Login to your WISPA account and adjust it there.



-
Mike Hammett
Intelligent Computing Solutions<http://www.ics-il.com/>
[http://www.ics-il.com/images/fbicon.png]<https://www.facebook.com/ICSIL>[http://www.ics-il.com/images/googleicon.png]<https://plus.google.com/+IntelligentComputingSolutionsDeKalb>[http://www.ics-il.com/images/linkedinicon.png]<https://www.linkedin.com/company/intelligent-computing-solutions>[http://www.ics-il.com/images/twittericon.png]<https://twitter.com/ICSIL>
Midwest Internet Exchange<http://www.midwest-ix.com/>
[http://www.ics-il.com/images/fbicon.png]<https://www.facebook.com/mdwestix>[http://www.ics-il.com/images/linkedinicon.png]<https://www.linkedin.com/company/midwest-internet-exchange>[http://www.ics-il.com/images/twittericon.png]<https://twitter.com/mdwestix>
The Brothers WISP<http://www.thebrotherswisp.com/>
[http://www.ics-il.com/images/fbicon.png]<https://www.facebook.com/thebrotherswisp>[http://www.ics-il.com/images/youtubeicon.png]<https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg>

From: "Aram Ter-Martirosyan" mailto:a...@connectto.com>>
To: "Ubiquiti Users Group" mailto:ubnt_users@wispa.org>>
Sent: Monday, May 8, 2017 3:15:32 PM
Subject: Re: [Ubnt_users] Firmware V6.0

Please remove me from the list

Aram Ter-Martirosyan
ConnectTo Communications
http://www.ConnectTo.com<http://www.connectto.com/>
555 Riverdale, Suite A
Glendale, CA 91204
a...@connectto.com<mailto:a...@connectto.com>
tel 818.546.4601
fax 818.546.4617

From: ubnt_users-boun...@wispa.org<mailto:ubnt_users-boun...@wispa.org> 
[mailto:ubnt_users-boun...@wispa.org] On Behalf Of Scott Monarco
Sent: Monday, May 08, 2017 1:14 PM
To: Ubiquiti Users Group
Subject: Re: [Ubnt_users] Firmware V6.0

Please remove me as well
Scott
From:ubnt_users-boun...@wispa.org<mailto:ubnt_users-boun...@wispa.org> 
[mailto:ubnt_users-boun...@wispa.org] On Behalf Of Christian Hilliard
Sent: Monday, May 8, 2017 1:32 PM
To: Ubiquiti Users Group mailto:ubnt_users@wispa.org>>
Subject: Re: [Ubnt_users] Firmware V6.0

Please remove me as well..
Thank you
Christian Hilliard
Founder
308-698-1444
chris.hilli...@usacommunications.tv<mailto:chris.hilli...@usacommunications.tv>
USACommunications.tv<http://usacommunications.tv/>

On May 8, 2017, at 2:02 PM, Blake Darling 
mailto:bl...@completecommunicationsinc.com>>
 wrote:

Please remove me from this thread/group…..

Thanks,

Blake

Blake Darling
President
801 647  Office/Cell
866 566 3827 Fax
bl...@completecommunicationsinc.com<mailto:bl...@completecommunicationsinc.com>
www.completecommunications.com<http://www.completecommunications.com>
http://lnked.in/completecommunicationsinc
Check us out in Enterprise Networking Magazine 2016 SDWWAN Top 10 Companies!
http://www.enterprisenetworkingmag.com/vendor/article9/completecommunications 
Digital Magazine Link:http://www.enterprisenetworkingmag.com/magazines/May/2016/

On May 8, 2017, at 12:10 PM, James Wilson 
mailto:ja...@ridgecomms.com>> wrote:

Odd, UBNT called 6.0.4 beta when they  announced it a non-beta forum...

We've installed 6.0.4 in a few APs and STAs in both bridge and router mode and 
haven't run into any problems.

On May 8, 2017 2:07 PM, "Jan-OOLLC" 
mailto:j.vank...@oregononline.net>> wrote:
So, we can assume v6.0.4 is beta and we are the test subjects?  Can we expect a 
report from whoever is daring enough to deploy?
Jan V
On 05/08/2017 10:52 AM, Ridgetop Networks wrote:
There were issues with stations refusing to reassociate until the AP was 
rebooted up to 6.0.3. So far so good with 6.0.4 for me, but it was infrequent 
enough in 6.0.3 that I can't confidently say it's fixed in 6.0.4.

On Mon, May 8, 2017 at 10:59 AM Jan-OOLLC 
mailto:j.vank...@oregononline.net>> wrote:
was the report of an 18dBm drop in RX an error with v6.0.3?
Jan V
On 05/08/2017 08:47 AM, Clay Stewart wrote:
6.0 was a double edge sword, it did improve some PtMs, but was dropping clients 
randomly. Not seeing that with 6.0.3.

On Mon, May 8, 2017 at 11:40 AM, Troy Gibson, Byhalia.ne

Re: [Ubnt_users] Firmware V6.0

[Josh Luthman]

It did this morning.


Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373

On Mon, May 8, 2017 at 4:23 PM, Mike Hammett 
wrote:

> That doesn't work. WISPA is the only mailman mailing list I know of that
> doesn't work for.
>
>
>
> -
> Mike Hammett
> Intelligent Computing Solutions <http://www.ics-il.com/>
> <https://www.facebook.com/ICSIL>
> <https://plus.google.com/+IntelligentComputingSolutionsDeKalb>
> <https://www.linkedin.com/company/intelligent-computing-solutions>
> <https://twitter.com/ICSIL>
> Midwest Internet Exchange <http://www.midwest-ix.com/>
> <https://www.facebook.com/mdwestix>
> <https://www.linkedin.com/company/midwest-internet-exchange>
> <https://twitter.com/mdwestix>
> The Brothers WISP <http://www.thebrotherswisp.com/>
> <https://www.facebook.com/thebrotherswisp>
> <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg>
> ------
> *From: *"Josh Luthman" 
> *To: *"Ubiquiti Users Group" 
> *Sent: *Monday, May 8, 2017 3:21:40 PM
>
> *Subject: *Re: [Ubnt_users] Firmware V6.0
>
> List-Id: Ubiquiti Users Group 
> List-Unsubscribe: <http://lists.wispa.org/mailman/listinfo/ubnt_users>,
> <mailto:ubnt_users-requ...@wispa.org?subject=unsubscribe>
>
>
>
> Josh Luthman
> Office: 937-552-2340 <(937)%20552-2340>
> Direct: 937-552-2343 <(937)%20552-2343>
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
> On Mon, May 8, 2017 at 4:15 PM, Aram Ter-Martirosyan 
> wrote:
>
>> Please remove me from the list
>>
>>
>>
>> Aram Ter-Martirosyan
>>
>> ConnectTo Communications
>>
>> http://www.ConnectTo.com <http://www.connectto.com/>
>>
>> 555 Riverdale, Suite A
>>
>> Glendale, CA 91204
>>
>> a...@connectto.com
>>
>> tel 818.546.4601 <(818)%20546-4601>
>>
>> fax 818.546.4617 <(818)%20546-4617>
>>
>>
>>
>> *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org]
>> *On Behalf Of *Scott Monarco
>> *Sent:* Monday, May 08, 2017 1:14 PM
>> *To:* Ubiquiti Users Group
>>
>> *Subject:* Re: [Ubnt_users] Firmware V6.0
>>
>>
>>
>> Please remove me as well
>>
>> Scott
>>
>> *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org
>> ] *On Behalf Of *Christian Hilliard
>> *Sent:* Monday, May 8, 2017 1:32 PM
>> *To:* Ubiquiti Users Group 
>> *Subject:* Re: [Ubnt_users] Firmware V6.0
>>
>>
>>
>> Please remove me as well..
>>
>> Thank you
>>
>> Christian Hilliard
>>
>> *Founder*
>>
>> *308-698-1444 <(308)%20698-1444>*
>>
>> chris.hilli...@usacommunications.tv
>>
>> *USA*Communications.tv <http://usacommunications.tv/>
>>
>>
>>
>> On May 8, 2017, at 2:02 PM, Blake Darling > completecommunicationsinc.com> wrote:
>>
>>
>>
>> Please remove me from this thread/group…..
>>
>>
>>
>> Thanks,
>>
>>
>>
>> Blake
>>
>>
>>
>> Blake Darling
>> President
>> 801 647  <(801)%20647-> Office/Cell
>> 866 566 3827 <(866)%20566-3827> Fax
>> bl...@completecommunicationsinc.com
>> www.completecommunications.com
>> http://lnked.in/completecommunicationsinc
>> Check us out in Enterprise Networking Magazine 2016 SDWWAN Top
>> 10 Companies!
>> http://www.enterprisenetworkingmag.com/vendor/article9/
>> completecommunications Digital Magazine Link:http://www.
>> enterprisenetworkingmag.com/magazines/May/2016/
>>
>>
>>
>> On May 8, 2017, at 12:10 PM, James Wilson  wrote:
>>
>>
>>
>> Odd, UBNT called 6.0.4 beta when they  announced it a non-beta forum...
>>
>>
>>
>> We've installed 6.0.4 in a few APs and STAs in both bridge and router
>> mode and haven't run into any problems.
>>
>>
>>
>> On May 8, 2017 2:07 PM, "Jan-OOLLC"  wrote:
>>
>> So, we can assume v6.0.4 is beta and we are the test subjects?  Can we
>> expect a report from whoever is daring enough to deploy?
>>
>> Jan V
>>
>> On 05/08/2017 10:52 AM, Ridgetop Networks wrote:
>>
>> There were issues with stations refusing to reassociate until the AP was
>> rebooted up to 6.0.3. So far so good with 6.0.4 for me, but it was
>> infrequent enough in 6.0.3 that I can't confidentl

Re: [Ubnt_users] Firmware V6.0

[Mike Hammett]

Anyone removed that way is added back the next. 




- 
Mike Hammett 
Intelligent Computing Solutions 

Midwest Internet Exchange 

The Brothers WISP 

- Original Message -

From: "Josh Luthman"  
To: "Ubiquiti Users Group"  
Sent: Monday, May 8, 2017 3:25:39 PM 
Subject: Re: [Ubnt_users] Firmware V6.0 


It did this morning. 






Josh Luthman 
Office: 937-552-2340 
Direct: 937-552-2343 
1100 Wayne St 
Suite 1337 
Troy, OH 45373 

On Mon, May 8, 2017 at 4:23 PM, Mike Hammett < wispaubntus...@ics-il.net > 
wrote: 




That doesn't work. WISPA is the only mailman mailing list I know of that 
doesn't work for. 




- 
Mike Hammett 
Intelligent Computing Solutions 

Midwest Internet Exchange 

The Brothers WISP 



From: "Josh Luthman" < j...@imaginenetworksllc.com > 
To: "Ubiquiti Users Group" < ubnt_users@wispa.org > 
Sent: Monday, May 8, 2017 3:21:40 PM 


Subject: Re: [Ubnt_users] Firmware V6.0 



List-Id: Ubiquiti Users Group < ubnt_users.wispa.org > 
List-Unsubscribe: < http://lists.wispa.org/mailman/listinfo/ubnt_users >, 
 








Josh Luthman 
Office: 937-552-2340 
Direct: 937-552-2343 
1100 Wayne St 
Suite 1337 
Troy, OH 45373 

On Mon, May 8, 2017 at 4:15 PM, Aram Ter-Martirosyan < a...@connectto.com > 
wrote: 





Please remove me from the list 


Aram Ter-Martirosyan 
ConnectTo Communications 
http://www.ConnectTo.com 
555 Riverdale, Suite A 
Glendale, CA 91204 
a...@connectto.com 
tel 818.546.4601 
fax 818.546.4617 



From: ubnt_users-boun...@wispa.org [mailto: ubnt_users-boun...@wispa.org ] On 
Behalf Of Scott Monarco 
Sent: Monday, May 08, 2017 1:14 PM 
To: Ubiquiti Users Group 


Subject: Re: [Ubnt_users] Firmware V6.0 




Please remove me as well 
Scott 


From: ubnt_users-boun...@wispa.org [ mailto:ubnt_users-boun...@wispa.org ] On 
Behalf Of Christian Hilliard 
Sent: Monday, May 8, 2017 1:32 PM 
To: Ubiquiti Users Group < ubnt_users@wispa.org > 
Subject: Re: [Ubnt_users] Firmware V6.0 

Please remove me as well.. 

Thank you 

Christian Hilliard 



Founder 

308-698-1444 

chris.hilli...@usacommunications.tv 

USA Communications . tv 





On May 8, 2017, at 2:02 PM, Blake Darling < bl...@completecommunicationsinc.com 
> wrote: 



Please remove me from this thread/group….. 



Thanks, 



Blake 





Blake Darling 
President 
801 647  Office/Cell 
866 566 3827 Fax 
bl...@completecommunicationsinc.com 
www.completecommunications.com 
http://lnked.in/completecommunicationsinc 
Check us out in Enterprise Networking Magazine 2016 SDWWAN Top 10 Companies! 
http://www.enterprisenetworkingmag.com/vendor/article9/completecommunications 
Digital Magazine Link: 
http://www.enterprisenetworkingmag.com/magazines/May/2016/ 





On May 8, 2017, at 12:10 PM, James Wilson < ja...@ridgecomms.com > wrote: 



Odd, UBNT called 6.0.4 beta when they announced it a non-beta forum... 



We've installed 6.0.4 in a few APs and STAs in both bridge and router mode and 
haven't run into any problems. 



On May 8, 2017 2:07 PM, "Jan-OOLLC" < j.vank...@oregononline.net > wrote: 



So, we can assume v6.0.4 is beta and we are the test subjects? Can we expect a 
report from whoever is daring enough to deploy? 

Jan V 


On 05/08/2017 10:52 AM, Ridgetop Networks wrote: 



There were issues with stations refusing to reassociate until the AP was 
rebooted up to 6.0.3. So far so good with 6.0.4 for me, but it was infrequent 
enough in 6.0.3 that I can't confidently say it's fixed in 6.0.4. 




On Mon, May 8, 2017 at 10:59 AM Jan-OOLLC < j.vank...@oregononline.net > wrote: 



was the report of an 18dBm drop in RX an error with v6.0.3? 

Jan V 


On 05/08/2017 08:47 AM, Clay Stewart wrote: 



6.0 was a double edge sword, it did improve some PtMs, but was dropping clients 
randomly. Not seeing that with 6.0.3. 



On Mon, May 8, 2017 at 11:40 AM, Troy Gibson, Byhalia.net < t...@byhalia.net > 
wrote: 




I am on 5.6.15 for both XM and XW. So far working well. Waiting on feedback 
from others on final version 6 updates to use as I did not see good results 
when I tested 6.0 so staying clear for now. 



Troy 








Sent from my Verizon, Samsung Galaxy smartphone 






 Original message ---- 

From: Jan-OOLLC < j.vank...@oregononline.net > 

Date: 5/8/17 11:22 AM (GMT-05:00) 

To: ubnt_users@wispa.org 

Subject: Re: [Ubnt_users] Firmware V6.0 


What is the safest best release to use as of right now? 

Jan V 

On 05/08/2017 05:33 AM, Clay Stewart wrote: 



v6.0.4 is out... have not switch yet here 



On Sun, May 7, 2017 at 10:27 PM, Scott Lambert < lamb...@lambertfam.org > 
wrote: 



Just checking, did you also note a drop in modulation to match the drop in 
modulation? Just want to make sure the RSSI drop you've observed is not purely 
cosmetic. 

We are late adopters here, so no experience. 




On May 7, 20

Re: [Ubnt_users] Firmware V6.0

[Brian Young]

It us because the association software maintains the lists.  To remove 
yourself, login into your portal at wispa.org, and maintain email preferences.



Sent from my Sprint Samsung Galaxy S7 edge.


 Original message 
From: Mike Hammett 
Date: 5/8/17 4:24 PM (GMT-05:00)
To: Ubiquiti Users Group 
Subject: Re: [Ubnt_users] Firmware V6.0

That doesn't work. WISPA is the only mailman mailing list I know of that 
doesn't work for.



-
Mike Hammett
Intelligent Computing Solutions<http://www.ics-il.com/>
[http://www.ics-il.com/images/fbicon.png]<https://www.facebook.com/ICSIL>[http://www.ics-il.com/images/googleicon.png]<https://plus.google.com/+IntelligentComputingSolutionsDeKalb>[http://www.ics-il.com/images/linkedinicon.png]<https://www.linkedin.com/company/intelligent-computing-solutions>[http://www.ics-il.com/images/twittericon.png]<https://twitter.com/ICSIL>
Midwest Internet Exchange<http://www.midwest-ix.com/>
[http://www.ics-il.com/images/fbicon.png]<https://www.facebook.com/mdwestix>[http://www.ics-il.com/images/linkedinicon.png]<https://www.linkedin.com/company/midwest-internet-exchange>[http://www.ics-il.com/images/twittericon.png]<https://twitter.com/mdwestix>
The Brothers WISP<http://www.thebrotherswisp.com/>
[http://www.ics-il.com/images/fbicon.png]<https://www.facebook.com/thebrotherswisp>[http://www.ics-il.com/images/youtubeicon.png]<https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg>

From: "Josh Luthman" 
To: "Ubiquiti Users Group" 
Sent: Monday, May 8, 2017 3:21:40 PM
Subject: Re: [Ubnt_users] Firmware V6.0

List-Id: Ubiquiti Users Group 
http://ubnt_users.wispa.org>>
List-Unsubscribe: <http://lists.wispa.org/mailman/listinfo/ubnt_users>, 
<mailto:ubnt_users-requ...@wispa.org<mailto:ubnt_users-requ...@wispa.org>?subject=unsubscribe>



Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373

On Mon, May 8, 2017 at 4:15 PM, Aram Ter-Martirosyan 
mailto:a...@connectto.com>> wrote:
Please remove me from the list

Aram Ter-Martirosyan
ConnectTo Communications
http://www.ConnectTo.com<http://www.connectto.com/>
555 Riverdale, Suite A
Glendale, CA 91204
a...@connectto.com<mailto:a...@connectto.com>
tel 818.546.4601
fax 818.546.4617

From: ubnt_users-boun...@wispa.org<mailto:ubnt_users-boun...@wispa.org> 
[mailto:ubnt_users-boun...@wispa.org<mailto:ubnt_users-boun...@wispa.org>] On 
Behalf Of Scott Monarco
Sent: Monday, May 08, 2017 1:14 PM
To: Ubiquiti Users Group

Subject: Re: [Ubnt_users] Firmware V6.0

Please remove me as well
Scott
From: ubnt_users-boun...@wispa.org<mailto:ubnt_users-boun...@wispa.org> 
[mailto:ubnt_users-boun...@wispa.org] On Behalf Of Christian Hilliard
Sent: Monday, May 8, 2017 1:32 PM
To: Ubiquiti Users Group mailto:ubnt_users@wispa.org>>
Subject: Re: [Ubnt_users] Firmware V6.0

Please remove me as well..
Thank you
Christian Hilliard
Founder
308-698-1444
chris.hilli...@usacommunications.tv<mailto:chris.hilli...@usacommunications.tv>
USACommunications.tv<http://usacommunications.tv/>

On May 8, 2017, at 2:02 PM, Blake Darling 
mailto:bl...@completecommunicationsinc.com>>
 wrote:

Please remove me from this thread/group…..

Thanks,

Blake

Blake Darling
President
801 647  Office/Cell
866 566 3827 Fax
bl...@completecommunicationsinc.com<mailto:bl...@completecommunicationsinc.com>
www.completecommunications.com<http://www.completecommunications.com>
http://lnked.in/completecommunicationsinc
Check us out in Enterprise Networking Magazine 2016 SDWWAN Top 10 Companies!
http://www.enterprisenetworkingmag.com/vendor/article9/completecommunications 
Digital Magazine Link:http://www.enterprisenetworkingmag.com/magazines/May/2016/

On May 8, 2017, at 12:10 PM, James Wilson 
mailto:ja...@ridgecomms.com>> wrote:

Odd, UBNT called 6.0.4 beta when they  announced it a non-beta forum...

We've installed 6.0.4 in a few APs and STAs in both bridge and router mode and 
haven't run into any problems.

On May 8, 2017 2:07 PM, "Jan-OOLLC" 
mailto:j.vank...@oregononline.net>> wrote:
So, we can assume v6.0.4 is beta and we are the test subjects?  Can we expect a 
report from whoever is daring enough to deploy?
Jan V
On 05/08/2017 10:52 AM, Ridgetop Networks wrote:
There were issues with stations refusing to reassociate until the AP was 
rebooted up to 6.0.3. So far so good with 6.0.4 for me, but it was infrequent 
enough in 6.0.3 that I can't confidently say it's fixed in 6.0.4.

On Mon, May 8, 2017 at 10:59 AM Jan-OOLLC 
mailto:j.vank...@oregononline.net>> wrote:
was the report of an 18dBm drop in RX an error with v6.0.3?
Jan V
On 05/08/2017 08:47 AM, Clay Stewart wrote:
6.0 was a double edge sword, it did improve some PtMs, but was droppin

Re: [Ubnt_users] Firmware V6.0

[Ben Buie - Gosuto]

Obviously something has gone wonky with WISPA's database or mailing list
software, as now a ton of people magically got added today without asking
to be.

If anyone on here is actually with the WISPA organization, please reach out
to your IT peeps and let them know something has gone wrong.

Thanks,

Ben

On Mon, May 8, 2017 at 4:31 PM, Brian Young 
wrote:

> It us because the association software maintains the lists.  To remove
> yourself, login into your portal at wispa.org, and maintain email
> preferences.
>
>
>
> Sent from my Sprint Samsung Galaxy S7 edge.
>
>
>  Original message 
> From: Mike Hammett 
> Date: 5/8/17 4:24 PM (GMT-05:00)
> To: Ubiquiti Users Group 
> Subject: Re: [Ubnt_users] Firmware V6.0
>
> That doesn't work. WISPA is the only mailman mailing list I know of that
> doesn't work for.
>
>
>
> -
> Mike Hammett
> Intelligent Computing Solutions <http://www.ics-il.com/>
> <https://www.facebook.com/ICSIL>
> <https://plus.google.com/+IntelligentComputingSolutionsDeKalb>
> <https://www.linkedin.com/company/intelligent-computing-solutions>
> <https://twitter.com/ICSIL>
> Midwest Internet Exchange <http://www.midwest-ix.com/>
> <https://www.facebook.com/mdwestix>
> <https://www.linkedin.com/company/midwest-internet-exchange>
> <https://twitter.com/mdwestix>
> The Brothers WISP <http://www.thebrotherswisp.com/>
> <https://www.facebook.com/thebrotherswisp>
> <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg>
> --
> *From: *"Josh Luthman" 
> *To: *"Ubiquiti Users Group" 
> *Sent: *Monday, May 8, 2017 3:21:40 PM
> *Subject: *Re: [Ubnt_users] Firmware V6.0
>
> List-Id: Ubiquiti Users Group 
> List-Unsubscribe: <http://lists.wispa.org/mailman/listinfo/ubnt_users>,
> <mailto:ubnt_users-requ...@wispa.org?subject=unsubscribe>
>
>
>
> Josh Luthman
> Office: 937-552-2340 <(937)%20552-2340>
> Direct: 937-552-2343 <(937)%20552-2343>
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
> On Mon, May 8, 2017 at 4:15 PM, Aram Ter-Martirosyan 
> wrote:
>
>> Please remove me from the list
>>
>>
>>
>> Aram Ter-Martirosyan
>>
>> ConnectTo Communications
>>
>> http://www.ConnectTo.com <http://www.connectto.com/>
>>
>> 555 Riverdale, Suite A
>>
>> Glendale, CA 91204
>>
>> a...@connectto.com
>>
>> tel 818.546.4601 <(818)%20546-4601>
>>
>> fax 818.546.4617 <(818)%20546-4617>
>>
>>
>>
>> *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org]
>> *On Behalf Of *Scott Monarco
>> *Sent:* Monday, May 08, 2017 1:14 PM
>> *To:* Ubiquiti Users Group
>>
>> *Subject:* Re: [Ubnt_users] Firmware V6.0
>>
>>
>>
>> Please remove me as well
>>
>> Scott
>>
>> *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org
>> ] *On Behalf Of *Christian Hilliard
>> *Sent:* Monday, May 8, 2017 1:32 PM
>> *To:* Ubiquiti Users Group 
>> *Subject:* Re: [Ubnt_users] Firmware V6.0
>>
>>
>>
>> Please remove me as well..
>>
>> Thank you
>>
>> Christian Hilliard
>>
>> *Founder*
>>
>> *308-698-1444 <(308)%20698-1444>*
>>
>> chris.hilli...@usacommunications.tv
>>
>> *USA*Communications.tv <http://usacommunications.tv/>
>>
>>
>>
>> On May 8, 2017, at 2:02 PM, Blake Darling > completecommunicationsinc.com> wrote:
>>
>>
>>
>> Please remove me from this thread/group…..
>>
>>
>>
>> Thanks,
>>
>>
>>
>> Blake
>>
>>
>>
>> Blake Darling
>> President
>> 801 647  <(801)%20647-> Office/Cell
>> 866 566 3827 <(866)%20566-3827> Fax
>> bl...@completecommunicationsinc.com
>> www.completecommunications.com
>> http://lnked.in/completecommunicationsinc
>> Check us out in Enterprise Networking Magazine 2016 SDWWAN Top
>> 10 Companies!
>> http://www.enterprisenetworkingmag.com/vendor/article9/
>> completecommunications Digital Magazine Link:http://www.
>> enterprisenetworkingmag.com/magazines/May/2016/
>>
>>
>>
>> On May 8, 2017, at 12:10 PM, James Wilson  wrote:
>>
>>
>>
>> Odd, UBNT called 6.0.4 beta when they  announced it a non-beta forum...
>>
>>
>>
>> We've installed 6.0.4 in a few APs and STAs in both bridge and router
>>

Re: [Ubnt_users] Firmware V6.0

[Jan-OOLLC]

Whether you are on a mailing list or not, please move your topic to it's 
own new topic category and stop hijacking this thread. You are being rude!


Jan V

On 05/08/2017 01:43 PM, Ben Buie - Gosuto wrote:
Obviously something has gone wonky with WISPA's database or mailing 
list software, as now a ton of people magically got added today 
without asking to be.


If anyone on here is actually with the WISPA organization, please 
reach out to your IT peeps and let them know something has gone wrong.


Thanks,

Ben

On Mon, May 8, 2017 at 4:31 PM, Brian Young <mailto:byo...@converge-tech.com>> wrote:


It us because the association software maintains the lists.  To
remove yourself, login into your portal at wispa.org
<http://wispa.org>, and maintain email preferences.



Sent from my Sprint Samsung Galaxy S7 edge.


 Original message 
From: Mike Hammett mailto:wispaubntus...@ics-il.net>>
Date: 5/8/17 4:24 PM (GMT-05:00)
To: Ubiquiti Users Group mailto:ubnt_users@wispa.org>>
    Subject: Re: [Ubnt_users] Firmware V6.0

That doesn't work. WISPA is the only mailman mailing list I know
of that doesn't work for.



-
Mike Hammett
Intelligent Computing Solutions <http://www.ics-il.com/>

<https://www.facebook.com/ICSIL><https://plus.google.com/+IntelligentComputingSolutionsDeKalb><https://www.linkedin.com/company/intelligent-computing-solutions><https://twitter.com/ICSIL>
Midwest Internet Exchange <http://www.midwest-ix.com/>

<https://www.facebook.com/mdwestix><https://www.linkedin.com/company/midwest-internet-exchange><https://twitter.com/mdwestix>
The Brothers WISP <http://www.thebrotherswisp.com/>

<https://www.facebook.com/thebrotherswisp><https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg>

*From: *"Josh Luthman" mailto:j...@imaginenetworksllc.com>>
    *To: *"Ubiquiti Users Group" mailto:ubnt_users@wispa.org>>
*Sent: *Monday, May 8, 2017 3:21:40 PM
*Subject: *Re: [Ubnt_users] Firmware V6.0

List-Id: Ubiquiti Users Group http://ubnt_users.wispa.org>>
List-Unsubscribe:
<http://lists.wispa.org/mailman/listinfo/ubnt_users
<http://lists.wispa.org/mailman/listinfo/ubnt_users>>,
<mailto:ubnt_users-requ...@wispa.org
<mailto:ubnt_users-requ...@wispa.org>?subject=unsubscribe>



Josh Luthman
Office: 937-552-2340 
Direct: 937-552-2343 
1100 Wayne St
Suite 1337
Troy, OH 45373

On Mon, May 8, 2017 at 4:15 PM, Aram Ter-Martirosyan
mailto:a...@connectto.com>> wrote:

Please remove me from the list

Aram Ter-Martirosyan

ConnectTo Communications

http://www.ConnectTo.com <http://www.connectto.com/>

555 Riverdale, Suite A

Glendale, CA 91204

a...@connectto.com <mailto:a...@connectto.com>

tel 818.546.4601 

fax 818.546.4617 

*From:*ubnt_users-boun...@wispa.org
<mailto:ubnt_users-boun...@wispa.org>
[mailto:ubnt_users-boun...@wispa.org
    <mailto:ubnt_users-boun...@wispa.org>] *On Behalf Of *Scott
Monarco
*Sent:* Monday, May 08, 2017 1:14 PM
*To:* Ubiquiti Users Group


*Subject:* Re: [Ubnt_users] Firmware V6.0

Please remove me as well

Scott

*From:*ubnt_users-boun...@wispa.org
<mailto:ubnt_users-boun...@wispa.org>
[mailto:ubnt_users-boun...@wispa.org
    <mailto:ubnt_users-boun...@wispa.org>] *On Behalf Of
*Christian Hilliard
*Sent:* Monday, May 8, 2017 1:32 PM
*To:* Ubiquiti Users Group mailto:ubnt_users@wispa.org>>
*Subject:* Re: [Ubnt_users] Firmware V6.0

Please remove me as well..

Thank you

Christian Hilliard

*Founder*

*308-698-1444 *

chris.hilli...@usacommunications.tv
<mailto:chris.hilli...@usacommunications.tv>

*USA*Communications.tv <http://usacommunications.tv/>

On May 8, 2017, at 2:02 PM, Blake Darling
mailto:bl...@completecommunicationsinc.com>> wrote:

Please remove me from this thread/group…..

Thanks,

Blake

Blake Darling
President
801 647   Office/Cell
866 566 3827  Fax
bl...@completecommunicationsinc.com
<mailto:bl...@completecommunicationsinc.com>
www.completecommunications.com
<http://www.completecommunications.com>
http://lnked.in/completecommunicationsinc
<http://lnked.in/completecommunicationsinc>
Check us out in 

Re: [Ubnt_users] Firmware V6.0

[Jesse DuPont]

  
  
Are the lists hosted by ServerPlus? They're having numerous issues
today...


  
  
  
  
  
  
  
  
  
  
  
  
  
Jesse DuPont

  Network
  Architect
  email: jesse.dup...@celeritycorp.net
  Celerity Networks LLC
  Celerity
  Broadband LLC
Like us! facebook.com/celeritynetworksllc
  Like us! facebook.com/celeritybroadband
  

  

On 5/8/17 2:21 PM, Brian Hesterberg via
  Ubnt_users wrote:


  
People. PAY ATTENTION. At some point you all signed up for
  this. Now it's on YOU to remove yourself. YOU must remove
  yourself. Log in and make the necessary changes.


Sent from my Verizon
  Wireless 4G LTE DROID
  
  On May 8, 2017 3:15 PM, Aram
Ter-Martirosyan  wrote:

  

      Please remove me from
  the list
   
  
Aram Ter-Martirosyan
ConnectTo Communications
http://www.ConnectTo.com
555 Riverdale, Suite A
Glendale, CA 91204
a...@connectto.com
tel 818.546.4601
fax 818.546.4617
  
   
  

  From:
  ubnt_users-boun...@wispa.org
  [mailto:ubnt_users-boun...@wispa.org] On
Behalf Of Scott Monarco
  Sent: Monday, May 08, 2017 1:14 PM
  To: Ubiquiti Users Group
  Subject: Re: [Ubnt_users] Firmware V6.0

  
   
  Please remove me as well
  Scott  
  

  From: ubnt_users-boun...@wispa.org
  [mailto:ubnt_users-boun...@wispa.org]
  On Behalf Of Christian Hilliard
  Sent: Monday, May 8, 2017 1:32 PM
  To: Ubiquiti Users Group <ubnt_users@wispa.org>
  Subject: Re: [Ubnt_users] Firmware V6.0

  
   
  Please remove me as well..
  
Thank you

  Christian Hilliard
  

  
Founder
  
  
308-698-1444
  


  chris.hilli...@usacommunications.tv


  USACommunications.tv

  

 

  

  On May 8, 2017, at 2:02 PM, Blake Darling <bl...@completecommunicationsinc.com>
wrote:

 

  
Please remove me from this thread/group…..

   


  Thanks, 


   


  Blake 


   


  

  Blake Darling
  President 
  801 647  Office/Cell
  866 566 3827 Fax
  bl...@completecommunicationsinc.com
  www.completecommunications.com
  http://lnked.in/completecommunicationsinc
  Check us out in Enterprise
  Networking Magazine 2016 SDWWAN Top
  10 Companies!
  http://www.enterprisenetworkingmag.com/vendor/article9/completecommunications Digital
  Magazine Link:http://www.enterprisenetworkingmag.com/magazines/May/2016/

  
   
  

  
On May 8, 2017, at 12:10 PM, James
  Wilson <ja...@ridgecomms.com>
   

Re: [Ubnt_users] Firmware V6.0

[Josh Luthman]

No

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373

On May 8, 2017 7:50 PM, "Jesse DuPont" 
wrote:

Are the lists hosted by ServerPlus? They're having numerous issues today...

*Jesse DuPont*

Network Architect
email: jesse.dup...@celeritycorp.net
Celerity Networks LLC

Celerity Broadband LLC
Like us! facebook.com/celeritynetworksllc

Like us! facebook.com/celeritybroadband
On 5/8/17 2:21 PM, Brian Hesterberg via Ubnt_users wrote:

People. PAY ATTENTION. At some point you all signed up for this. Now it's
on YOU to remove yourself. YOU must remove yourself. Log in and make the
necessary changes.

*Sent from my Verizon Wireless 4G LTE DROID*
On May 8, 2017 3:15 PM, Aram Ter-Martirosyan 
 wrote:

Please remove me from the list



Aram Ter-Martirosyan

ConnectTo Communications

http://www.ConnectTo.com <http://www.connectto.com/>

555 Riverdale, Suite A

Glendale, CA 91204

a...@connectto.com

tel 818.546.4601 <(818)%20546-4601>

fax 818.546.4617 <(818)%20546-4617>



*From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org
] *On Behalf Of *Scott Monarco
*Sent:* Monday, May 08, 2017 1:14 PM
*To:* Ubiquiti Users Group
*Subject:* Re: [Ubnt_users] Firmware V6.0



Please remove me as well

Scott

*From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org
] *On Behalf Of *Christian Hilliard
*Sent:* Monday, May 8, 2017 1:32 PM
*To:* Ubiquiti Users Group 
*Subject:* Re: [Ubnt_users] Firmware V6.0



Please remove me as well..

Thank you

Christian Hilliard

*Founder*

*308-698-1444 <(308)%20698-1444>*

chris.hilli...@usacommunications.tv

*USA*Communications.tv <http://usacommunications.tv/>



On May 8, 2017, at 2:02 PM, Blake Darling  wrote:



Please remove me from this thread/group…..



Thanks,



Blake



Blake Darling
President
801 647  <(801)%20647-> Office/Cell
866 566 3827 <(866)%20566-3827> Fax
bl...@completecommunicationsinc.com
www.completecommunications.com
http://lnked.in/completecommunicationsinc
Check us out in Enterprise Networking Magazine 2016 SDWWAN Top 10 Companies!
http://www.enterprisenetworkingmag.com/vendor/article9/
completecommunications Digital Magazine Link:http://www.
enterprisenetworkingmag.com/magazines/May/2016/



On May 8, 2017, at 12:10 PM, James Wilson  wrote:



Odd, UBNT called 6.0.4 beta when they  announced it a non-beta forum...



We've installed 6.0.4 in a few APs and STAs in both bridge and router mode
and haven't run into any problems.



On May 8, 2017 2:07 PM, "Jan-OOLLC"  wrote:

So, we can assume v6.0.4 is beta and we are the test subjects?  Can we
expect a report from whoever is daring enough to deploy?

Jan V

On 05/08/2017 10:52 AM, Ridgetop Networks wrote:

There were issues with stations refusing to reassociate until the AP was
rebooted up to 6.0.3. So far so good with 6.0.4 for me, but it was
infrequent enough in 6.0.3 that I can't confidently say it's fixed in 6.0.4.



On Mon, May 8, 2017 at 10:59 AM Jan-OOLLC 
wrote:

was the report of an 18dBm drop in RX an error with v6.0.3?

Jan V

On 05/08/2017 08:47 AM, Clay Stewart wrote:

6.0 was a double edge sword, it did improve some PtMs, but was dropping
clients randomly. Not seeing that with 6.0.3.



On Mon, May 8, 2017 at 11:40 AM, Troy Gibson, Byhalia.net
<http://byhalia.net/>  wrote:

I am on 5.6.15 for both XM and XW.  So far working well.  Waiting on
feedback from others on final version 6 updates to use as I did not see
good results when I tested 6.0 so staying clear for now.



Troy







Sent from my Verizon, Samsung Galaxy smartphone



 Original message ----

From: Jan-OOLLC 

Date: 5/8/17 11:22 AM (GMT-05:00)

To: ubnt_users@wispa.org

Subject: Re: [Ubnt_users] Firmware V6.0



What is the safest best release to use as of right now?

Jan V

On 05/08/2017 05:33 AM, Clay Stewart wrote:

v6.0.4 is out... have not switch yet here



On Sun, May 7, 2017 at 10:27 PM, Scott Lambert 
wrote:

Just checking, did you also note a drop in modulation to match the drop in
modulation? Just want to make sure the RSSI drop you've observed is not
purely cosmetic.

We are late adopters here, so no experience.



On May 7, 2017 4:57:42 PM CDT, Nick Bright  wrote:

v6.0 is said to have disassociation problems.

I tested v6.0.3 on several sites with a mix of XM/XW (mostly XM) 2.4GHz
hardware. Mostly RM2 AP units, some BulletM2 units. Mostly AirGrid and
PowerBeam SMs.

It was stable, with no disassociation issues, but we had a non-trivial
number of SM units exhibit a *significant* drop in RX signal strength - but
it was not consistent across the AP. We also showed experimentally that
restoring that one SM unit back to 5.6.15 (leaving the AP unit at 6.0.3)
restored the signal strength to the previous level. Some clients lost as
much as 18dBm RX strength.

We chose to go back to 5.6.15 at that point.

On

Re: [Ubnt_users] Firmware V6.0

[Jan-OOLLC]

ReCap: What I got from this thread is v5.6.15 works ok. (?)  v6.0 drops 
CPEs, v6.0.3 might cause RX power to drop, by huge amount, v6.0.4 might 
be usable.  v6.0.4 as the AP and v5.6.15 on the CPE.


Most of my networks are using NSM2 for CPEs and most APs are RocketM2.  
All of my Backbones are PowerBeamM5.  I have a few airGridM2 also.


I have stability issues.  What firmware will improve things?

Jan V

On 05/08/2017 02:44 PM, Jan-OOLLC wrote:


Whether you are on a mailing list or not, please move your topic to 
it's own new topic category and stop hijacking this thread.  You are 
being rude!


Jan V

On 05/08/2017 01:43 PM, Ben Buie - Gosuto wrote:
Obviously something has gone wonky with WISPA's database or mailing 
list software, as now a ton of people magically got added today 
without asking to be.


If anyone on here is actually with the WISPA organization, please 
reach out to your IT peeps and let them know something has gone wrong.


Thanks,

Ben

On Mon, May 8, 2017 at 4:31 PM, Brian Young <mailto:byo...@converge-tech.com>> wrote:


It us because the association software maintains the lists.  To
remove yourself, login into your portal at wispa.org
<http://wispa.org>, and maintain email preferences.



Sent from my Sprint Samsung Galaxy S7 edge.


 Original message 
From: Mike Hammett mailto:wispaubntus...@ics-il.net>>
Date: 5/8/17 4:24 PM (GMT-05:00)
To: Ubiquiti Users Group mailto:ubnt_users@wispa.org>>
    Subject: Re: [Ubnt_users] Firmware V6.0

That doesn't work. WISPA is the only mailman mailing list I know
of that doesn't work for.



-
Mike Hammett
Intelligent Computing Solutions <http://www.ics-il.com/>

<https://www.facebook.com/ICSIL><https://plus.google.com/+IntelligentComputingSolutionsDeKalb><https://www.linkedin.com/company/intelligent-computing-solutions><https://twitter.com/ICSIL>
Midwest Internet Exchange <http://www.midwest-ix.com/>

<https://www.facebook.com/mdwestix><https://www.linkedin.com/company/midwest-internet-exchange><https://twitter.com/mdwestix>
The Brothers WISP <http://www.thebrotherswisp.com/>

<https://www.facebook.com/thebrotherswisp><https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg>

*From: *"Josh Luthman" mailto:j...@imaginenetworksllc.com>>
    *To: *"Ubiquiti Users Group" mailto:ubnt_users@wispa.org>>
*Sent: *Monday, May 8, 2017 3:21:40 PM
*Subject: *Re: [Ubnt_users] Firmware V6.0

List-Id: Ubiquiti Users Group http://ubnt_users.wispa.org>>
List-Unsubscribe:
<http://lists.wispa.org/mailman/listinfo/ubnt_users
<http://lists.wispa.org/mailman/listinfo/ubnt_users>>,
<mailto:ubnt_users-requ...@wispa.org
<mailto:ubnt_users-requ...@wispa.org>?subject=unsubscribe>



Josh Luthman
Office: 937-552-2340 
Direct: 937-552-2343 
1100 Wayne St
Suite 1337
Troy, OH 45373

On Mon, May 8, 2017 at 4:15 PM, Aram Ter-Martirosyan
mailto:a...@connectto.com>> wrote:

Please remove me from the list

Aram Ter-Martirosyan

ConnectTo Communications

http://www.ConnectTo.com <http://www.connectto.com/>

555 Riverdale, Suite A

Glendale, CA 91204

a...@connectto.com <mailto:a...@connectto.com>

tel 818.546.4601 

fax 818.546.4617 

*From:*ubnt_users-boun...@wispa.org
<mailto:ubnt_users-boun...@wispa.org>
[mailto:ubnt_users-boun...@wispa.org
    <mailto:ubnt_users-boun...@wispa.org>] *On Behalf Of *Scott
Monarco
*Sent:* Monday, May 08, 2017 1:14 PM
*To:* Ubiquiti Users Group


*Subject:* Re: [Ubnt_users] Firmware V6.0

Please remove me as well

Scott

*From:*ubnt_users-boun...@wispa.org
<mailto:ubnt_users-boun...@wispa.org>
[mailto:ubnt_users-boun...@wispa.org
    <mailto:ubnt_users-boun...@wispa.org>] *On Behalf Of
*Christian Hilliard
*Sent:* Monday, May 8, 2017 1:32 PM
*To:* Ubiquiti Users Group mailto:ubnt_users@wispa.org>>
*Subject:* Re: [Ubnt_users] Firmware V6.0

Please remove me as well..

Thank you

Christian Hilliard

*Founder*

*308-698-1444 *

chris.hilli...@usacommunications.tv
<mailto:chris.hilli...@usacommunications.tv>

*USA*Communications.tv <http://usacommunications.tv/>

On May 8, 2017, at 2:02 PM, Blake Darling
mailto:bl...@completecommunicationsinc.com>> wrote:

Please remove me from this thread/group…..

Thanks,

Blake

Blake Darling

Re: [Ubnt_users] Firmware V6.0

[Tommy Adams]

EPMP elevate and new ePMP AP's. Problem solved. 

Joking, but it will solve the pain. 



Tommy A.
Digitex.com

817.558.6230 V
817.558.1204 F

> On May 8, 2017, at 5:14 PM, Jan-OOLLC  wrote:
> 
> ReCap: What I got from this thread is v5.6.15 works ok. (?)  v6.0 drops CPEs, 
> v6.0.3 might cause RX power to drop, by huge amount, v6.0.4 might be usable.  
> v6.0.4 as the AP and v5.6.15 on the CPE.  
> Most of my networks are using NSM2 for CPEs and most APs are RocketM2.  All 
> of my Backbones are PowerBeamM5.  I have a few airGridM2 also.
> 
> I have stability issues.  What firmware will improve things? 
> Jan V
> 
>> On 05/08/2017 02:44 PM, Jan-OOLLC wrote:
>> Whether you are on a mailing list or not, please move your topic to it's own 
>> new topic category and stop hijacking this thread.  You are being rude!
>> Jan V
>> 
>>> On 05/08/2017 01:43 PM, Ben Buie - Gosuto wrote:
>>> Obviously something has gone wonky with WISPA's database or mailing list 
>>> software, as now a ton of people magically got added today without asking 
>>> to be.
>>> 
>>> If anyone on here is actually with the WISPA organization, please reach out 
>>> to your IT peeps and let them know something has gone wrong.
>>> 
>>> Thanks,
>>> 
>>> Ben
>>> 
>>>> On Mon, May 8, 2017 at 4:31 PM, Brian Young  
>>>> wrote:
>>>> It us because the association software maintains the lists.  To remove 
>>>> yourself, login into your portal at wispa.org, and maintain email 
>>>> preferences.
>>>> 
>>>> 
>>>> 
>>>> Sent from my Sprint Samsung Galaxy S7 edge.
>>>> 
>>>> 
>>>>  Original message 
>>>> From: Mike Hammett 
>>>> Date: 5/8/17 4:24 PM (GMT-05:00)
>>>> To: Ubiquiti Users Group 
>>>> Subject: Re: [Ubnt_users] Firmware V6.0
>>>> 
>>>> That doesn't work. WISPA is the only mailman mailing list I know of that 
>>>> doesn't work for.
>>>> 
>>>> 
>>>> 
>>>> -
>>>> Mike Hammett
>>>> Intelligent Computing Solutions
>>>> 
>>>> Midwest Internet Exchange
>>>> 
>>>> The Brothers WISP
>>>> 
>>>> From: "Josh Luthman" 
>>>> To: "Ubiquiti Users Group" 
>>>> Sent: Monday, May 8, 2017 3:21:40 PM
>>>> Subject: Re: [Ubnt_users] Firmware V6.0
>>>> 
>>>> List-Id: Ubiquiti Users Group 
>>>> List-Unsubscribe: <http://lists.wispa.org/mailman/listinfo/ubnt_users>, 
>>>> <mailto:ubnt_users-requ...@wispa.org?subject=unsubscribe>
>>>> 
>>>> 
>>>> 
>>>> Josh Luthman
>>>> Office: 937-552-2340
>>>> Direct: 937-552-2343
>>>> 1100 Wayne St
>>>> Suite 1337
>>>> Troy, OH 45373
>>>> 
>>>>> On Mon, May 8, 2017 at 4:15 PM, Aram Ter-Martirosyan  
>>>>> wrote:
>>>>> Please remove me from the list
>>>>> 
>>>>>  
>>>>> 
>>>>> Aram Ter-Martirosyan
>>>>> 
>>>>> ConnectTo Communications
>>>>> 
>>>>> http://www.ConnectTo.com
>>>>> 
>>>>> 555 Riverdale, Suite A
>>>>> 
>>>>> Glendale, CA 91204
>>>>> 
>>>>> a...@connectto.com
>>>>> 
>>>>> tel 818.546.4601
>>>>> 
>>>>> fax 818.546.4617
>>>>> 
>>>>>  
>>>>> 
>>>>> From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] 
>>>>> On Behalf Of Scott Monarco
>>>>> Sent: Monday, May 08, 2017 1:14 PM
>>>>> To: Ubiquiti Users Group
>>>>> 
>>>>> 
>>>>> Subject: Re: [Ubnt_users] Firmware V6.0
>>>>>  
>>>>> 
>>>>> Please remove me as well
>>>>> 
>>>>> Scott  
>>>>> 
>>>>> From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] 
>>>>> On Behalf Of Christian Hilliard
>>>>> Sent: Monday, May 8, 2017 1:32 PM
>>>>> To: Ubiquiti Users Group 
>>>>> Subject: Re: [Ubnt_users] Firmware V6.0
>>>>> 
>>>>>  
>>>>> 
&

Re: [Ubnt_users] Firmware V6.0

[David Hulsebus]

We continue to run 5.6.9 and below; mostly 5.6.5.  We had an issue with 
6.03 last week. Took a system with 4 PB-400 clients and a PB-400 AP and 
upgraded them. When we replaced the 3rd client on the list below with a 
new PB400 after a storm because of a 10MB ethernet issue. Within 18 hrs 
of replacing it the RX side of that radio was dropping to 1.625 rates. 
We kicked it, it came back up fine and the next day did the same thing. 
We downgraded them all to 5.6.9 and haven't had an issue since. The MAC 
is F0:9F:C2 When we have time we will take an older MAC address based 
system out and try upgrading again.


We didn't see any RX power drops with 6.03 but these were the first five 
systems we updated.


Our experience in mixing Nano Bridges, Power Beams, and Nano Stations on 
a system have not been good over the last couple years. Now it looks 
like same family and mac's may be an issue as well.


YMMV, Dave Hulsebus


44:D9:E7:DC:56:12 B G
-62 -59 -1061   1.6 36.111 / 36.111 99  
3 days 23:23:16 
kick 
80:2A:A8:2A:45:3D  	D M 	-59 	-61 
-106 	1 	1.8 	36.111 / 36.111 	97 	3 days 23:23:19 	

kick 
F0:9F:C2:94:1B:09 T S
-54 -52 -1062   2.1 36.111 / 36.111 99  
3 days 17:56:16 
kick 
04:18:D6:36:8C:FB  	T St 	-63 	-60 
-106 	1 	1.9 	36.111 / 36.111 	99 	3 days 23:23:15 	

kick 





On 5/8/2017 11:30 AM, Clay Stewart wrote:
We are not experiencing any issue yet with 6.0.3, but will be trying 
6.0.4 this week. 6.0 has disconnect issues.


On Mon, May 8, 2017 at 11:22 AM, Jan-OOLLC > wrote:


What is the safest best release to use as of right now?

Jan V

On 05/08/2017 05:33 AM, Clay Stewart wrote:

v6.0.4 is out... have not switch yet here

On Sun, May 7, 2017 at 10:27 PM, Scott Lambert
mailto:lamb...@lambertfam.org>> wrote:

Just checking, did you also note a drop in modulation to
match the drop in modulation? Just want to make sure the RSSI
drop you've observed is not purely cosmetic.

We are late adopters here, so no experience.

On May 7, 2017 4:57:42 PM CDT, Nick Bright
mailto:nick.bri...@valnet.net>> wrote:

v6.0 is said to have disassociation problems.

I tested v6.0.3 on several sites with a mix of XM/XW
(mostly XM) 2.4GHz hardware. Mostly RM2 AP units, some
BulletM2 units. Mostly AirGrid and PowerBeam SMs.

It was stable, with no disassociation issues, but we had
a non-trivial number of SM units exhibit a *significant*
drop in RX signal strength - but it was not consistent
across the AP. We also showed experimentally that
restoring that one SM unit back to 5.6.15 (leaving the AP
unit at 6.0.3) restored the signal strength to the
previous level. Some clients lost as much as 18dBm RX
strength.

We chose to go back to 5.6.15 at that point.

On 5/6/2017 5:49 PM, Daniel Peoples wrote:

I sent him XW and XM, if anyone else has other versions,
send them over.

/Daniel Peoples/
Resonance Broadband
/Resonancebroadband.com/ 
918-429-3620


On Sat, May 6, 2017 at 4:02 PM, Eduardo
mailto:eme...@webjogger.com>> wrote:

We have currently using v5.6.6 and want to try
v6.0.3, was told that v6.0 was more stable.
Does someone have the v6.0 firmware?

___
Ubnt_users mailing list
Ubnt_users@wispa.org 
http://lists.wispa.org/mailman/listinfo/ubnt_users





___
Ubnt_users mailing list
Ubnt_users@wispa.org 
http://lists.wispa.org/mailman/listinfo/ubnt_users



-- 
---

-  Nick Bright-
-  Vice President of Technology   -
-  Valnet -=- We Connect You -=-  -
-  Tel888-332-1616 x 315   / Fax620-331-0789 
   -
-  Webhttp://www.valnet.net/  -
-

Re: [Ubnt_users] Firmware V6.0

[Jan-OOLLC]

I had a whole case of new nanobeams do that to me.  Sounds like it was 
firmware?  Good I didn't scrap them yet.  Seems I was not able to 
downgrade them, is there a trick to it?  Sorry, that's off-topic, make 
it a side-note.  What I was thinking of doing was making an AP run 6.0.4 
and CPE run the 5.6.15 on just one network and watch it.  But if this 
will cause them to go to sleep every 10 minutes I can get in a lot of 
skeet practice.  Right now some APs are on 5.6.9 and most CPEs are on 5.5.11


Jan V

On 05/09/2017 12:49 PM, David Hulsebus wrote:


We continue to run 5.6.9 and below; mostly 5.6.5.  We had an issue 
with 6.03 last week. Took a system with 4 PB-400 clients and a PB-400 
AP and upgraded them. When we replaced the 3rd client on the list 
below with a new PB400 after a storm because of a 10MB ethernet issue. 
Within 18 hrs of replacing it the RX side of that radio was dropping 
to 1.625 rates. We kicked it, it came back up fine and the next day 
did the same thing. We downgraded them all to 5.6.9 and haven't had an 
issue since. The MAC is F0:9F:C2 When we have time we will take an 
older MAC address based system out and try upgrading again.


We didn't see any RX power drops with 6.03 but these were the first 
five systems we updated.


Our experience in mixing Nano Bridges, Power Beams, and Nano Stations 
on a system have not been good over the last couple years. Now it 
looks like same family and mac's may be an issue as well.


YMMV, Dave Hulsebus


44:D9:E7:DC:56:12 B G
-62 -59 -1061   1.6 36.111 / 36.111 99  
3 days 23:23:16 
kick 
80:2A:A8:2A:45:3D  	D M 	-59 	-61 
-106 	1 	1.8 	36.111 / 36.111 	97 	3 days 23:23:19 	

kick 
F0:9F:C2:94:1B:09 T S
-54 -52 -1062   2.1 36.111 / 36.111 99  
3 days 17:56:16 
kick 
04:18:D6:36:8C:FB  	T St 	-63 	-60 
	-106 	1 	1.9 	36.111 / 36.111 	99 	3 days 23:23:15 	

kick 





On 5/8/2017 11:30 AM, Clay Stewart wrote:
We are not experiencing any issue yet with 6.0.3, but will be trying 
6.0.4 this week. 6.0 has disconnect issues.


On Mon, May 8, 2017 at 11:22 AM, Jan-OOLLC 
mailto:j.vank...@oregononline.net>> wrote:


What is the safest best release to use as of right now?

Jan V

On 05/08/2017 05:33 AM, Clay Stewart wrote:

v6.0.4 is out... have not switch yet here

On Sun, May 7, 2017 at 10:27 PM, Scott Lambert
mailto:lamb...@lambertfam.org>> wrote:

Just checking, did you also note a drop in modulation to
match the drop in modulation? Just want to make sure the
RSSI drop you've observed is not purely cosmetic.

We are late adopters here, so no experience.

On May 7, 2017 4:57:42 PM CDT, Nick Bright
mailto:nick.bri...@valnet.net>> wrote:

v6.0 is said to have disassociation problems.

I tested v6.0.3 on several sites with a mix of XM/XW
(mostly XM) 2.4GHz hardware. Mostly RM2 AP units, some
BulletM2 units. Mostly AirGrid and PowerBeam SMs.

It was stable, with no disassociation issues, but we had
a non-trivial number of SM units exhibit a *significant*
drop in RX signal strength - but it was not consistent
across the AP. We also showed experimentally that
restoring that one SM unit back to 5.6.15 (leaving the
AP unit at 6.0.3) restored the signal strength to the
previous level. Some clients lost as much as 18dBm RX
strength.

We chose to go back to 5.6.15 at that point.

On 5/6/2017 5:49 PM, Daniel Peoples wrote:

I sent him XW and XM, if anyone else has other
versions, send them over.

/Daniel Peoples/
Resonance Broadband
/Resonancebroadband.com/ 
918-429-3620


On Sat, May 6, 2017 at 4:02 PM, Eduardo
mailto:eme...@webjogger.com>> wrote:

We have currently using v5.6.6 and want to try
v6.0.3, was told that v6.0 was more stable.
Does someone have the v6.0 firmware?

___
Ubnt_users mailing list
Ubnt_users@wispa.org 
http://lists.wispa.org/mailman/listinfo/ubnt_users





___
Ubnt_users mailing list
Ubnt_users@wispa.org