[Bug 1511524] Re: OpenVPN PAM authentication broken on 15.10 Server
Confirm. The same problem in Ubuntu 18.04 Bionic with OpenVPN 2.4.4, and the same solution - had to add CAP_AUDIT_WRITE into CapabilityBoundingSet parameter in /lib/systemd/system/openvpn@.service. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1511524 Title: OpenVPN PAM authentication broken on 15.10 Server To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/openvpn/+bug/1511524/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1482095] Re: Vagrant wants older Virtualbox than is available in the repositories
The latest version of Vagrant (1.8.1) supports VirtualBox 5.X Vagrant package upgrade to version >=1.8.1 would be appreciated. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1482095 Title: Vagrant wants older Virtualbox than is available in the repositories To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/vagrant/+bug/1482095/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1418287] Re: Vivid Unbound package is old
Kindly ask you to update Unbound package, but for Xenial as well, due to its DNS64 feature in 1.5.x version. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1418287 Title: Vivid Unbound package is old To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unbound/+bug/1418287/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 645449] Re: Ubiquity hangs at Keyboard layout/Ready when you are
Just ran into it myself installing on an Acer Travelmate 2310. Obnoxious bug... Workaround: Applications -> Accessories > Terminal Run command: sudo killall ubiquity In case you had some weird layout selected and for this reason you cannot write this command, copy paste it... (Or go to System -> Preferences > Keyboard and apply the default keyboard layout system wide...) Then run the installer again and you should be able to use the manual partitioner mode to reset the installation to install again the same way you were about to when it hung. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/645449 Title: Ubiquity hangs at Keyboard layout/Ready when you are -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 433311] Re: Canon PIXMA iP2600 won't work with supplied or downloaded drivers.
On Lucid, I could first not install the packages from the asian Canon site, mentioned above. Using --force-depends ... sudo dpkg -i --force-architecture --force-depends cnijfilter-common_2.90-1_i386.deb sudo dpkg -i --force-architecture --force-depends cnijfilter-ip2600series_2.90-1_i386.deb ...got them installed, and my iP2600 printer working, but also left the system with broken packages... Meaning I can't install or upgrade anything while having a working printer... $ LANG=C sudo apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done You might want to run `apt-get -f install' to correct these. The following packages have unmet dependencies: cnijfilter-common: Depends: libcupsys2 (>= 1.2.1) cnijfilter-ip2600series: Depends: libcupsys2 (>= 1.2.1) E: Unmet dependencies. Try using -f. The "Provides" is there, but it does not seem to help, as suggested in comment #13 above... Any "--accept-provides" switch out there or similar? $ LANG=C aptitude show libcups2 Package: libcups2 State: installed Automatically installed: no Version: 1.4.3-1ubuntu1.2 Priority: optional Section: libs Maintainer: Ubuntu Core Developers Uncompressed Size: 467k Depends: libavahi-client3 (>= 0.6.16), libavahi-common3 (>= 0.6.16), libc6 (>= 2.4), libgnutls26 (>= 2.7.14-0), libgssapi-krb5-2 (>= 1.7+dfsg), zlib1g (>= 1:1.1.4) Suggests: cups-common Conflicts: libcupsys2 (< 1.3.7-6) Replaces: libcupsys2 (< 1.3.7-6) Provides: libcupsys2 ... -- Canon PIXMA iP2600 won't work with supplied or downloaded drivers. https://bugs.launchpad.net/bugs/433311 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 366057] Re: virt-manager refuses to connect " cannot recv data:"
*** This bug is a duplicate of bug 251036 *** https://bugs.launchpad.net/bugs/251036 Seems like I am dropping words... "Now, for me, installation of ssh-askpass hasn't yet helped neither, after successful password entered the same error message appears, but that may be yet another bug..." -- virt-manager refuses to connect " cannot recv data:" https://bugs.launchpad.net/bugs/366057 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 366057] Re: virt-manager refuses to connect " cannot recv data:"
*** This bug is a duplicate of bug 251036 *** https://bugs.launchpad.net/bugs/251036 This is not a dupe of #251036 ... That treats a case about mismatching keys. This is more generic about the lack of dependency on ssh-askpass Now, for me, installation ssh-askpass hasn't yet neither, but that may be yet another bug... -- virt-manager refuses to connect " cannot recv data:" https://bugs.launchpad.net/bugs/366057 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 426813] Re: snmpd dies after requests with snmpwalk
Although not noted in this bug report, it may be fixed for hardy. I hadn't enabled hardy-updates and now when using the latest packages, the service has been running for 2 hours without shutting down. -- snmpd dies after requests with snmpwalk https://bugs.launchpad.net/bugs/426813 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 426813] Re: snmpd dies after requests with snmpwalk
Such a shame! Trying to set up Zenoss monitoring and couldn't understand why the snmp deamon would stop responding after a couple of minutes after deamon restart... Running Hardy LTS because I thought it was stable enough to be included in a data center / under monitoring. No workaround or fix for Hardy still? -- snmpd dies after requests with snmpwalk https://bugs.launchpad.net/bugs/426813 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 512964] Re: gtkpod crashes with SIGSEGV in gdk_window_set_geometry_hints
Same here. Anyone knows another way to copy files from iPod to filesystem with the track/video/filenames intact? -- gtkpod crashes with SIGSEGV in gdk_window_set_geometry_hints https://bugs.launchpad.net/bugs/512964 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 554099] Re: qualcomm gobi (2000) mobile broadband module not working after upgrade to lucid
Thanks tnf for the summary. Don't forget this part: http://sanitarium.se/wiki/HP_un2400_3G_modem_in_Linux#Holding_back_updates_for_the_kernel Holding back updates for the kernel If you've installed a patched kernel you may not want to recompile every time Ubuntu updates the kernel... # echo "linux-image-2.6.32-21-generic hold" | dpkg --set-selections Thanks all for finding the work-arounds necessary, I finally could upgrade this Compaq Mini 110c to Lucid :) -- qualcomm gobi (2000) mobile broadband module not working after upgrade to lucid https://bugs.launchpad.net/bugs/554099 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 506131] Re: option to hide menu bar in firefox 3.6?
This plug-in hides the title bar supposedly and works for 3.0->3.7: https://addons.mozilla.org/en-US/firefox/addon/13505/ -- option to hide menu bar in firefox 3.6? https://bugs.launchpad.net/bugs/506131 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 546653] Re: Dlink DWA-125 (07d1:3c0d) is processed by wrong module
Just realized that step 5 got wrapped in a bad way by the launchpad software. In step 5, all should be in _one_ line only. -- Dlink DWA-125 (07d1:3c0d) is processed by wrong module https://bugs.launchpad.net/bugs/546653 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 546653] Re: Dlink DWA-125 (07d1:3c0d) is processed by wrong module
When I have an issue with a device, I google the lsusb device id: 07d1:3c0d This is the first hit on Google, so here is how to get the device working on Lucid 10.04: 1. Download the "RT3070USB(RT307x)"-driver from http://www.ralink.com.tw/support.php?s=2 Direct link: http://www.ralink.com.tw/license_us.php?n=2&p=0&t=U0wyRnpjMlYwY3k4eU1ERXdMekEwTHpFMUwyUnZkMjVzYjJGa09Ea3pOREU1TnpBeE9TNWllakk5UFQxRVVFOWZVbFF6TURjd1gweHBiblY0VTFSQlgxWXlMak11TUM0eVh6SXdNVEF3TkRFeUM%3D 2. Extract the file, open a terminal and cd into it tar -xvf DPO_RT3070_LinuxSTA_V2.3.0.2_20100412.bz2 cd DPO_RT3070_LinuxSTA_V2.3.0.2_20100412 3. Change a file according to instructions here: http://www.linuxforums.org/forum/wireless-internet/161550-rt3070sta-module-license-unspecified-taints-kernel-solved.html Under "Here is what you need to do:" ...until the instructions tells you to recompile the driver. 4. Compile and install the driver: make sudo make install 5. Add a missing symlink: ln -s /etc/Wireless/RT3070STA/RT3070STA.dat /etc/Wireless/RT2870STA/RT2870STA.dat 6. Load the driver sudo modprobe rt3070sta This worked for me. Lucid 10.04 with all updates installed as of today. -- Dlink DWA-125 (07d1:3c0d) is processed by wrong module https://bugs.launchpad.net/bugs/546653 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 389154] Re: EXT4-fs error
I get the same when trying to run my (cloned) system from a usb hard drive. Running the system in VirtualBox works fine - no ext4 errors there... -- EXT4-fs error https://bugs.launchpad.net/bugs/389154 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 480596] Re: Incompatible extension 'Google Gears' in Firefox 3.5
Workaround for Karmic: sudo apt-get install gears sudo nano /usr/lib/xulrunner-addons/extensions/{000a9d1c-beef- 4f90-9363-039d445309b8}/install.rdf In this file, change 0.5.32 to 0.5.33 This will make firefox think you already have the 0.5.33 installed and thus not try to upgrade to it (failing every time) Since Google doesn't support gears any longer there will probably not be any new updates anyway. >From http://tuxtweaks.com/2010/01/fix-google-gears-for-firefox-on-linux/ adapted for Karmic. This is IMO the only way to have gears in Linux, since gears in Chrome for Linux never will be available. -- Incompatible extension 'Google Gears' in Firefox 3.5 https://bugs.launchpad.net/bugs/480596 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 554099] Re: HP un2400 mobile broadband module not working after upgrade to lucid
Seems like this netbook (Compaq Mini 110c) is not going to meet Lucid anytime soon... :( Awaiting meerkat... -- HP un2400 mobile broadband module not working after upgrade to lucid https://bugs.launchpad.net/bugs/554099 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 474398] Re: Kerneloops while creating wireless network - [169904.320059] ------------[ cut here ]------------
** Attachment added: "AlsaDevices.txt" http://launchpadlibrarian.net/35104079/AlsaDevices.txt ** Attachment added: "AplayDevices.txt" http://launchpadlibrarian.net/35104081/AplayDevices.txt ** Attachment added: "ArecordDevices.txt" http://launchpadlibrarian.net/35104082/ArecordDevices.txt ** Attachment added: "BootDmesg.txt" http://launchpadlibrarian.net/35104083/BootDmesg.txt ** Attachment added: "Card0.Amixer.values.txt" http://launchpadlibrarian.net/35104084/Card0.Amixer.values.txt ** Attachment added: "Card0.Codecs.codec.0.txt" http://launchpadlibrarian.net/35104085/Card0.Codecs.codec.0.txt ** Attachment added: "CurrentDmesg.gz" http://launchpadlibrarian.net/35104086/CurrentDmesg.gz ** Attachment added: "Dependencies.txt" http://launchpadlibrarian.net/35104087/Dependencies.txt ** Attachment added: "IwConfig.txt" http://launchpadlibrarian.net/35104088/IwConfig.txt ** Attachment added: "Lspci.txt" http://launchpadlibrarian.net/35104090/Lspci.txt ** Attachment added: "Lsusb.txt" http://launchpadlibrarian.net/35104091/Lsusb.txt ** Attachment added: "OopsText.txt" http://launchpadlibrarian.net/35104092/OopsText.txt ** Attachment added: "PciMultimedia.txt" http://launchpadlibrarian.net/35104093/PciMultimedia.txt ** Attachment added: "ProcCpuinfo.txt" http://launchpadlibrarian.net/35104094/ProcCpuinfo.txt ** Attachment added: "ProcInterrupts.txt" http://launchpadlibrarian.net/35104095/ProcInterrupts.txt ** Attachment added: "ProcModules.txt" http://launchpadlibrarian.net/35104096/ProcModules.txt ** Attachment added: "RfKill.txt" http://launchpadlibrarian.net/35104097/RfKill.txt ** Attachment added: "UdevDb.txt" http://launchpadlibrarian.net/35104098/UdevDb.txt ** Attachment added: "UdevLog.txt" http://launchpadlibrarian.net/35104100/UdevLog.txt ** Attachment added: "WifiSyslog.gz" http://launchpadlibrarian.net/35104101/WifiSyslog.gz -- Kerneloops while creating wireless network - [169904.320059] [ cut here ] https://bugs.launchpad.net/bugs/474398 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 474398] [NEW] Kerneloops while creating wireless network - [169904.320059] ------------[ cut here ]------------
Public bug reported: Apport cought this. Hard to see if it is a duplicate or not... ProblemType: KernelOops Annotation: Your system might become unstable now and might need to be restarted. Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: motin 23817 F pulseaudio /dev/snd/seq:timidity 1880 F timidity CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xf6ffc000 irq 21' Mixer name : 'SigmaTel STAC9228' Components : 'HDA:83847616,10280209,00100201' Controls : 29 Simple ctrls : 19 Date: Wed Nov 4 13:18:25 2009 DistroRelease: Ubuntu 9.10 Failure: oops HibernationDevice: RESUME=UUID=99bdff7c-637e-419f-bb4a-a9eb393640e7 MachineType: Dell Inc. XPS M1330 NonfreeKernelModules: nvidia Package: linux-image-2.6.31-14-generic 2.6.31-14.48 ProcCmdLine: BOOT_IMAGE=/vmlinuz-2.6.31-14-generic root=UUID=93414db5-64a1-429a-a92e-49343f09d898 ro quiet splash ProcVersionSignature: Ubuntu 2.6.31-14.48-generic RelatedPackageVersions: linux-backports-modules-2.6.31-14-generic N/A linux-firmware 1.24 SourcePackage: linux Tags: kernel-oops Title: [169904.320059] [ cut here ] Uname: Linux 2.6.31-14-generic i686 dmi.bios.date: 12/26/2008 dmi.bios.vendor: Dell Inc. dmi.bios.version: A15 dmi.board.name: 0PU073 dmi.board.vendor: Dell Inc. dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA15:bd12/26/2008:svnDellInc.:pnXPSM1330:pvr:rvnDellInc.:rn0PU073:rvr:cvnDellInc.:ct8:cvr: dmi.product.name: XPS M1330 dmi.sys.vendor: Dell Inc. ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: apport-kerneloops i386 kernel-oops -- Kerneloops while creating wireless network - [169904.320059] [ cut here ] https://bugs.launchpad.net/bugs/474398 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 150702] Re: alt shift tab stopped navigating windows
Broken in default Karmic... Any chance that a post-release-update can change the default behavior to the Metacity one? -- alt shift tab stopped navigating windows https://bugs.launchpad.net/bugs/150702 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 376840] Re: Volume notification pops up and never go off using 100% cpu
*** This bug is a duplicate of bug 367049 *** https://bugs.launchpad.net/bugs/367049 I realized that one trigger to this was my hardware! I run a Dell XPS M1330 and the media buttons seems to be activated by the heat or pressure of the LCD when the lid is closed! That means that if I close the lid for a couple of minutes, the lid will spam X with these events. I guess it has always been so (when having media shortcuts active - which has not been too often because of frequent breakages of these assignments between updates), but only with the notify-osd has it become a CPU intensive issue which queues up and imposes this annoying issue. On Fri, Oct 23, 2009 at 11:48 PM, Mirco Müller wrote: > *** This bug is a duplicate of bug 367049 *** >https://bugs.launchpad.net/bugs/367049 > > Chris, have you tried notify-osd 0.9.24 yet? > > -- > Volume notification pops up and never go off using 100% cpu > https://bugs.launchpad.net/bugs/376840 > You received this bug notification because you are a direct subscriber > of the bug. > -- Volume notification pops up and never go off using 100% cpu https://bugs.launchpad.net/bugs/376840 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 460718] [NEW] [needs-packaging] VIRTUAL MIDI PIANO KEYBOARD
Public bug reported: VMPK is a MIDI events generator and receiver. Homepage: http://vmpk.sourceforge.net/ It is a imo far better alternative than the rather antique vkeybd that we have been stuck with the last years. Debian stable and testing has packages, but they hasn't been included in karmic for whatever reason. Does it need approval from a MOTU? Not sure about the routines, but I used prevu to import the latest version to my ppa: https://launchpad.net/~motin/+archive/ppa Hope this helps and that it can be included in the universe soon! :) ** Affects: ubuntu Importance: Undecided Status: New -- [needs-packaging] VIRTUAL MIDI PIANO KEYBOARD https://bugs.launchpad.net/bugs/460718 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 152487] Re: Jack output for xine apps
JACK enabled xine packages are available for Karmic at https://launchpad.net/~motin/+archive/until-jack-is-included-in- main/+packages -- Jack output for xine apps https://bugs.launchpad.net/bugs/152487 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 84900] Re: libasound2-plugins misses alsa pcm jack plugin
JACK-Enabled alsa-plugins packages for Karmic can be found here: https://launchpad.net/~motin/+archive/until-jack-is-included-in- main/+packages -- libasound2-plugins misses alsa pcm jack plugin https://bugs.launchpad.net/bugs/84900 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 109659] Re: jack sink missing in pulseaudio
JACK-Enabled pulseaudio packages can be found here: https://launchpad.net/~motin/+archive/until-jack-is-included-in- main/+packages -- jack sink missing in pulseaudio https://bugs.launchpad.net/bugs/109659 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 360590] Re: Please compile portaudio with Jack support
Now I got the versions right... The trick is to increment the # in "0ubuntu#", then add ~something0... I'll try to get alsa-plugins and pulseaudio with jack support in the ppa as well... -- Please compile portaudio with Jack support https://bugs.launchpad.net/bugs/360590 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 360590] Re: Please compile portaudio with Jack support
Ok, now packages are available in the following PPA: https://launchpad.net/~motin/+archive/until-jack-is-included-in-main I added the PPA to my sources, apt-get updated but an apt-get upgrade currently does not opt for installing the "~withjack1" appended versions Maybe someone can help me with what version number I should use so that the packages gets proposed for upgrade? PS. I added a rebuild of xine as well (with the xine JACK plugin included) -- Please compile portaudio with Jack support https://bugs.launchpad.net/bugs/360590 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 413296] Re: Nvidia binary driver won't build with 2.6.31-rt kernel
Has anyone gotten a stable system yet? When _anyone_ with nvidia graphics can, say, use "Mixxx" which requires accelerated graphics and performs best with JACK in realtime mode, progress is made... But is that reality yet? Using the latest rt and 185 nvidia drivers from karmic repos and still no-go with stable graphics... Tracking my progress and have collected some valuable information in http://ubuntuforums.org/showthread.php?p=8127639 on the subject. -- Nvidia binary driver won't build with 2.6.31-rt kernel https://bugs.launchpad.net/bugs/413296 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 339537] Re: Mixxx in Jaunty does not support JACK
*** This bug is a duplicate of bug 360590 *** https://bugs.launchpad.net/bugs/360590 I added instrucions on how As well, Mixxx 1.7 seems to have a bug where changing the sound preferences making Mixxx hang. Manually change ~/.mixxx/mixxx.cfg section [Soundcard] to: [Soundcard] SoundApi JACK Audio Connection Kit DeviceMaster 7, system DeviceMasterLeft 7, system DeviceMasterRight 7, system ChannelMaster 0 ChannelHeadphones 2 DeviceHeadphones 7, system Now finally it works over here in karmic with JACK... -- Mixxx in Jaunty does not support JACK https://bugs.launchpad.net/bugs/339537 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 360590] Re: Please compile portaudio with Jack support
I believe I managed to upload the 32-bit packages to my ppa: https://launchpad.net/~motin/+archive/ppa Log from dput: $ dput my-ppa portaudio19_19+svn20090620-0ubuntu1~withjack0_i386.changes Checking Signature on .changes gpg: Signatur gjordes mån 19 okt 2009 02.03.24 CLST med DSA nyckel-id B7D91961 gpg: Korrekt signatur från "Motin " Good signature on /home/motin/src/portaudio19_19+svn20090620-0ubuntu1~withjack0_i386.changes. Uploading to my-ppa (via ftp to ppa.launchpad.net): Uploading portaudio19-doc_19+svn20090620-0ubuntu1~withjack0_all.deb: done. Uploading libportaudio2_19+svn20090620-0ubuntu1~withjack0_i386.deb: done. Uploading portaudio19-dev_19+svn20090620-0ubuntu1~withjack0_i386.deb: done. Uploading libportaudiocpp0_19+svn20090620-0ubuntu1~withjack0_i386.deb: done. Uploading portaudio19_19+svn20090620-0ubuntu1~withjack0_i386.changes: done. Successfully uploaded packages. Although I have never done this before and I don't see the package in my ppa right now. Maybe later it will show up... ? :) -- Please compile portaudio with Jack support https://bugs.launchpad.net/bugs/360590 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 360590] Re: Please compile portaudio with Jack support
Rebuilding the ubuntu package with jack support compiled in: sudo apt-get build-dep portaudio19 sudo apt-get install libjack0.100.0-dev apt-get source portaudio19 cd portaudio* gedit debian/rules Here change the commented: #ENABLE_JACK=no to ENABLE_JACK=no (uncommented) and also "--with-jack=no" to "--with-jack=yes" just below that line Then rebuild and install: dpkg-buildpackage -rfakeroot -b cd .. sudo dpkg -i libportaudio2_19+svn20090620-0ubuntu1_i386.deb sudo dpkg -i libportaudiocpp0_19+svn20090620-0ubuntu1_i386.deb sudo dpkg -i portaudio19-doc_19+svn20090620-0ubuntu1_all.deb (More or less from the instructions for Gutsy in Bug #183011) -- Please compile portaudio with Jack support https://bugs.launchpad.net/bugs/360590 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 453289] Re: BUG: scheduling while atomic: ntpd/0x00000002/3615, CPU#0
** Attachment added: "Dependencies.txt" http://launchpadlibrarian.net/33792958/Dependencies.txt ** Attachment added: "OopsText.txt" http://launchpadlibrarian.net/33792960/OopsText.txt -- BUG: scheduling while atomic: ntpd/0x0002/3615, CPU#0 https://bugs.launchpad.net/bugs/453289 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 453289] [NEW] BUG: scheduling while atomic: ntpd/0x00000002/3615, CPU#0
Public bug reported: After installing this rt kernel, I have had to recompile the nvidia drivers (using dkms) twice and reboot 7 times before the system finally ran long enough to be able to get on the web... Submitting any apport crash reports now in hope that any shows what's wrong... ProblemType: KernelOops Annotation: Your system might become unstable now and might need to be restarted. Architecture: i386 Date: Fri Oct 16 13:47:47 2009 DistroRelease: Ubuntu 9.10 Failure: oops NonfreeKernelModules: nvidia Package: linux-image-2.6.31-9-rt ProcVersionSignature: Ubuntu 2.6.31-9.152-rt SourcePackage: linux Tags: kernel-oops Title: BUG: scheduling while atomic: ntpd/0x0002/3615, CPU#0 Uname: Linux 2.6.31-9-rt i686 ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: apport-kerneloops i386 kernel-oops -- BUG: scheduling while atomic: ntpd/0x0002/3615, CPU#0 https://bugs.launchpad.net/bugs/453289 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 409819] Re: [regression] Built-in mic not working after pulse updates on Karmic. Intel 82801H (ICH8 Family) sound card.
Thanks Manfred, I too had to "alsamixer -V all" and fibble with the settings to get the microphone working again after ~11 oct updates. -- [regression] Built-in mic not working after pulse updates on Karmic. Intel 82801H (ICH8 Family) sound card. https://bugs.launchpad.net/bugs/409819 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 431955] Re: xorg fails with module i810 error (module does not exist
FYI, Whatever problem I had is now gone after latest updates. Can use the computer again. -- xorg fails with module i810 error (module does not exist https://bugs.launchpad.net/bugs/431955 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 431955] Re: xorg fails with module i810 error (module does not exist
Using intel driver did remove the message but not solve the issue at least for me. It worked great before the latest updates... which makes me ask if anyone know how to restore the packages to the working versions?? What packages etc? Please don't say that we have to wait for a fix to be released which could take weeks, under which time the computer is basically useless with a ultraslooow interface... A restore routine would make it possible to use the computer and testing other stuff while waiting for a fix at least... (Hopefully someday we can have a feature like this: http://brainstorm.ubuntu.com/idea/628/ making this kind of restore easy) -- xorg fails with module i810 error (module does not exist https://bugs.launchpad.net/bugs/431955 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 368536] Re: Opening djvu files crashes evince
Ah, upstream it already says: Carlos Garcia Campos [evince developer] 2009-08-29 13:49:17 UTC That document is broken, we shouldn't crash though. -- Opening djvu files crashes evince https://bugs.launchpad.net/bugs/368536 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 368536] Re: Opening djvu files crashes evince
"note: the file opens correctly with djview4" Well, on Jaunty only the first 88 pages are available here as well. Are you sure this djvu file is complete? Can all pages be opened in a djvu reader on Windows or similar? I have no problems opening other djvu files in evince. If this file is damaged, the bug should be renamed to "Opening incomplete/damaged djvu files crashes evince", which still would be valid, as it would be about fixing evince to incorporate the same behavior as djview, ie not crash but simply displaying the pages that exists. -- Opening djvu files crashes evince https://bugs.launchpad.net/bugs/368536 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 128914] Re: As I added an application to a drawer in my quicklaunch bar an error occurred. All my quicklaunch and drawers went lost withous any chances to get them back.
This just happened to me yesterday. A pain to see all my custom panel icons disappear in front of my eyes! I hoped it was a temporary issue so I restarted but no everything still gone... And with the restart no trace of the .xsession-errors neither. I was adding the Timer applet to my panel, which used to be there but wasn't at the time (I think I remember some sort of message about it not being able to load when I booted many days ago...). The pasta water was already boiling, so no time for research, just added the Timer applet again, got that error message, and the Timer applet practically replaced all my panel shortcuts (the other apps are still there though). Running Jaunty... -- As I added an application to a drawer in my quicklaunch bar an error occurred. All my quicklaunch and drawers went lost withous any chances to get them back. https://bugs.launchpad.net/bugs/128914 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 220036] Re: Multi-Pointer X Window Server
Some update - 9.10 will not include MPX due to the delayed X Server 1.7 Source: http://www.phoronix.com/scan.php?page=news_item&px=NzQzNA Hopefully ppa's will be made available for Karmic so that we at least can test MPX... -- Multi-Pointer X Window Server https://bugs.launchpad.net/bugs/220036 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 194489] Re: ps2 synaptics touchpad causing huge amounts of wakeups
I agree, it seems very unlikely that all laptop touchpads have hard- wired polling frequency that not even the best linus hacker could override. Is this really the case? Can we get some more explanation on the issue, and maybe some confirmation that it is the same on Windows? -- ps2 synaptics touchpad causing huge amounts of wakeups https://bugs.launchpad.net/bugs/194489 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 368553] Re: [jaunty] [TYPO in script - missing quote] line 81: unexpected EOF while looking for matching `"' /usr/lib/hal/scripts/linux/hal-system-killswitch-get-power-linux: line 84: syntax erro
Hey, I haven't been in to check in here for a while. The visible result was that before the fix, the wireless would not activate itself automatically after switching on and off the killswitch. It didn't fix the issue of activating if the killswitch was enabled before suspend, though. But one less regression is good as well. Attaching hal.txt, though it should be identical to the one attached above from an XPS 1330. ** Attachment added: "hal.txt" http://launchpadlibrarian.net/27732037/hal.txt -- [jaunty] [TYPO in script - missing quote] line 81: unexpected EOF while looking for matching `"' /usr/lib/hal/scripts/linux/hal-system-killswitch-get-power-linux: line 84: syntax error: unexpected end of file. https://bugs.launchpad.net/bugs/368553 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 385424] [NEW] [Dell Inc. XPS M1330] suspend/resume failure [non-free: nvidia]
Public bug reported: This error doesn't happen everytime, but maybe every tenth suspend attempt. It will hang right before it usually switched down into suspend mode, with the cursor blinking in a vt showing status messages about firestarter and some bt_usb stuff (which it always also does when it successfully suspends, why I believe it's not related). Doesn't look like the other similar bugs out there, but either way I need to report as new bug since I can't know before this is actually reported and I see the actual attached debug info :P ProblemType: KernelOops Annotation: This occured during a previous suspend and prevented it from resuming properly. Architecture: i386 DistroRelease: Ubuntu 9.04 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=99bdff7c-637e-419f-bb4a-a9eb393640e7 InterpreterPath: /usr/bin/python2.6 MachineType: Dell Inc. XPS M1330 NonfreeKernelModules: nvidia Package: linux-image-2.6.28-11-generic 2.6.28-11.42 ProcAttrCurrent: unconfined ProcCmdLine: root=UUID=f8b235cb-e449-47e0-9de8-01d3c036e835 ro quiet splash vga=773 reboot=w ProcCmdline: /usr/bin/python /usr/share/apport/apportcheckresume ProcEnviron: PATH=(custom, no user) ProcVersionSignature: Ubuntu 2.6.28-11.42-generic SourcePackage: linux Tags: resume suspend Title: [Dell Inc. XPS M1330] suspend/resume failure [non-free: nvidia] UserGroups: ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: apport-kerneloops i386 resume suspend -- [Dell Inc. XPS M1330] suspend/resume failure [non-free: nvidia] https://bugs.launchpad.net/bugs/385424 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 385424] Re: [Dell Inc. XPS M1330] suspend/resume failure [non-free: nvidia]
** Attachment added: "BootDmesg.txt" http://launchpadlibrarian.net/27716800/BootDmesg.txt ** Attachment added: "CurrentDmesg.txt" http://launchpadlibrarian.net/27716802/CurrentDmesg.txt ** Attachment added: "Dependencies.txt" http://launchpadlibrarian.net/27716803/Dependencies.txt ** Attachment added: "HalComputerInfo.txt" http://launchpadlibrarian.net/27716804/HalComputerInfo.txt ** Attachment added: "Lspci.txt" http://launchpadlibrarian.net/27716805/Lspci.txt ** Attachment added: "Lsusb.txt" http://launchpadlibrarian.net/27716806/Lsusb.txt ** Attachment added: "ProcCpuinfo.txt" http://launchpadlibrarian.net/27716807/ProcCpuinfo.txt ** Attachment added: "ProcInterrupts.txt" http://launchpadlibrarian.net/27716808/ProcInterrupts.txt ** Attachment added: "ProcMaps.txt" http://launchpadlibrarian.net/27716809/ProcMaps.txt ** Attachment added: "ProcModules.txt" http://launchpadlibrarian.net/27716810/ProcModules.txt ** Attachment added: "ProcStatus.txt" http://launchpadlibrarian.net/27716811/ProcStatus.txt ** Attachment added: "SleepLog.txt" http://launchpadlibrarian.net/27716812/SleepLog.txt -- [Dell Inc. XPS M1330] suspend/resume failure [non-free: nvidia] https://bugs.launchpad.net/bugs/385424 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 174809] Re: Nautilus using more and more memory (depending on the system up-time)
I also have a core dump for nautilus in it's current state. Can't attach it since it is 2.9 gb... I'll run any necessary report tool on it if further information is needed. Nautilus clearly has issues with memory hogging and there should now be enough debug information available for this bug to be considered confirmed. ** Changed in: nautilus (Ubuntu) Status: New => Confirmed -- Nautilus using more and more memory (depending on the system up-time) https://bugs.launchpad.net/bugs/174809 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 174809] apport-collect data
Architecture: i386 DistroRelease: Ubuntu 9.04 NonfreeKernelModules: nvidia Package: nautilus 1:2.26.2-0ubuntu2 PackageArchitecture: i386 ProcEnviron: SHELL=/bin/bash PATH=(custom, user) LANG=sv_SE.UTF-8 Uname: Linux 2.6.28-11-generic i686 UserGroups: adm admin audio cdrom dialout dip floppy fuse lpadmin plugdev pulse sambashare video www-data -- Nautilus using more and more memory (depending on the system up-time) https://bugs.launchpad.net/bugs/174809 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 174809]
** Attachment added: "Dependencies.txt" http://launchpadlibrarian.net/27592276/Dependencies.txt -- Nautilus using more and more memory (depending on the system up-time) https://bugs.launchpad.net/bugs/174809 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 174809] Re: Nautilus using more and more memory (depending on the system up-time)
I just moved around a lot of files between external hard drives, around 400 GB all in all. It took all night, and now I have unmounted all drives and thought I would be able to work as usual, but the system is slow and unresponsive. Nautilus takes up a whopping 1.6 gb resident, and 2.9gb all in all (so 1.3 gb in swap). Extract from top: PID USER PR NI VIRT RES SHR S %CPU %MEMTIME+ COMMAND 5247 motin 20 0 2957m 1.6g 4972 S0 47.6 69:54.49 nautilus 1115 motin 20 0 765m 473m 10m S4 13.4 113:13.34 firefox I guess nautilus somewhere has cached the file lists of all transferred files or similar, and hasn't released this memory even though even the drives are unmounted and disconnected. Attaching the output of pmap `pidof nautilus`. I have saved a the contents of the files in /proc/`pidof nautilus`/ as well in case something else needs to be attached (Please tell me what else is needed) ** Attachment added: "pmap.log" http://launchpadlibrarian.net/27588922/pmap.log ** Changed in: nautilus (Ubuntu) Status: Invalid => New -- Nautilus using more and more memory (depending on the system up-time) https://bugs.launchpad.net/bugs/174809 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 366408] Re: Documentation inconsistent with behaviour required to move a gnome-panel.
After upgrade to Jaunty I cannot move the panel in any way except for making when they are not expanded automatically (which is not an acceptable workaround). No combinations of mouse clicks, ctrl and/or alt keys held down has been successful. Since this is prevalent on two different machines only after Jaunty-upgrade others ought to be affected by this as well. Is this the same issue or am I better off opening a new bug item about it? -- Documentation inconsistent with behaviour required to move a gnome-panel. https://bugs.launchpad.net/bugs/366408 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 287894] Re: Dosbox reading keys wrong after 8.10 upgrade
Me too. Worked right away after that. -- Dosbox reading keys wrong after 8.10 upgrade https://bugs.launchpad.net/bugs/287894 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 376840] Re: Volume notification pops up and never go off using 100% cpu
I tried inactivating the keyboard shortcuts for changing the volume without luck. Also ran xev to see if my hotkeys were spamming key presses to X. They are not. Gotta log out now... -- Volume notification pops up and never go off using 100% cpu https://bugs.launchpad.net/bugs/376840 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 376840] Re: Volume notification pops up and never go off using 100% cpu
I am experiencing the same behavior right now. Very annoying. It's notify-osd and X that takes up around 43% each of the cpu. The rest is used by other apps, mostly firefox. Just ran that command as you can see. ** Changed in: notify-osd (Ubuntu) Status: Incomplete => New -- Volume notification pops up and never go off using 100% cpu https://bugs.launchpad.net/bugs/376840 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 376840]
** Attachment added: "Dependencies.txt" http://launchpadlibrarian.net/26786782/Dependencies.txt -- Volume notification pops up and never go off using 100% cpu https://bugs.launchpad.net/bugs/376840 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 376840] apport-collect data
Architecture: i386 DistroRelease: Ubuntu 9.04 NonfreeKernelModules: nvidia Package: notify-osd 0.9.11-0ubuntu3 PackageArchitecture: i386 ProcEnviron: SHELL=/bin/bash PATH=(custom, user) LANG=sv_SE.UTF-8 Uname: Linux 2.6.28-11-generic i686 UserGroups: adm admin audio cdrom dialout dip floppy fuse lpadmin plugdev pulse sambashare video www-data -- Volume notification pops up and never go off using 100% cpu https://bugs.launchpad.net/bugs/376840 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 299586] Re: Usplash should use a time-based progressbar
Is it safe to install the intrepid version from the ppa in Jaunty? -- Usplash should use a time-based progressbar https://bugs.launchpad.net/bugs/299586 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 36668] Re: Hibernate / Suspend should have graphical usplash screens showing progress
This has been a standard feature in XP and OS X since eons ago... Almost 400 votes now on brainstorm. Is there underlying technical difficulties for this or does someone simply have to "get on to it"? -- Hibernate / Suspend should have graphical usplash screens showing progress https://bugs.launchpad.net/bugs/36668 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 284863] Re: cannot build exmap module in intrepid ibex
The patch listed two comments above also enables build, installation and functionality on Jaunty. Thanks all who contributed to the solution! All this bug seems to need to be fixed is packaging, it seems. Please consider patching the version included in the repositories! -- cannot build exmap module in intrepid ibex https://bugs.launchpad.net/bugs/284863 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 275471] Re: mozilla attachments are dowloaded multiple times
@jplotkin: Good attempt, but I enabled the setting, restarted tb and still everytime I open a message with say a 6mb attachment, it downloads it anew. Then, if I want to save it, I have to download it again... I increased the size limit of saving for offline use from 1024 kb to 10240 kb to no avail - now after synchronization for offline use, going offline then back online I can retrieve a cached version of the message without having to re-download it. Seems to be a workaround more than a solution though. -- mozilla attachments are dowloaded multiple times https://bugs.launchpad.net/bugs/275471 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 367856] Re: Contact is lost with internal HSDPA/UMTS modem after some random period - a suspend and wake cycle or a restart is needed to be able to use the modem again
** Attachment added: "syslog-resume-up-until-device-correctly-probed-including-option-debug-output-during-modprobe.log" http://launchpadlibrarian.net/26069336/syslog-resume-up-until-device-correctly-probed-including-option-debug-output-during-modprobe.log -- Contact is lost with internal HSDPA/UMTS modem after some random period - a suspend and wake cycle or a restart is needed to be able to use the modem again https://bugs.launchpad.net/bugs/367856 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 367856] Re: Contact is lost with internal HSDPA/UMTS modem after some random period - a suspend and wake cycle or a restart is needed to be able to use the modem again
** Attachment added: "syslog-suspend.log" http://launchpadlibrarian.net/26069333/syslog-suspend.log -- Contact is lost with internal HSDPA/UMTS modem after some random period - a suspend and wake cycle or a restart is needed to be able to use the modem again https://bugs.launchpad.net/bugs/367856 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 367856] Re: Contact is lost with internal HSDPA/UMTS modem after some random period - a suspend and wake cycle or a restart is needed to be able to use the modem again
** Attachment added: "non-working-state_lshal.txt" http://launchpadlibrarian.net/26069262/non-working-state_lshal.txt -- Contact is lost with internal HSDPA/UMTS modem after some random period - a suspend and wake cycle or a restart is needed to be able to use the modem again https://bugs.launchpad.net/bugs/367856 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 367856] Re: Contact is lost with internal HSDPA/UMTS modem after some random period - a suspend and wake cycle or a restart is needed to be able to use the modem again
** Attachment added: "non-working-state_udevadm-ttyUSB0-info.txt" http://launchpadlibrarian.net/26069254/non-working-state_udevadm-ttyUSB0-info.txt -- Contact is lost with internal HSDPA/UMTS modem after some random period - a suspend and wake cycle or a restart is needed to be able to use the modem again https://bugs.launchpad.net/bugs/367856 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 367856] Re: Contact is lost with internal HSDPA/UMTS modem after some random period - a suspend and wake cycle or a restart is needed to be able to use the modem again
** Description changed: Binary package hint: network-manager - This is so frustrating, loosing internet connection frequently: + Short version: - Modem connection (and thus the current ppp connection) with the Dell XPS - M1330 internal UMTS / HSDPA modem silently drops dead at times (around - 1-4 hours after connection, sometimes 8-10 hours afterwards, sometimes - 0.5h etc - very randomly it seems, but certain for sure), with no other - choice than to suspend and resume the laptop to be able to connect - again. Not a favorable workaround since suspend fails around 1 time of - 10... + Modem communication drops to a non-working state at seemlingly random times. In that state, serial communication times out. If the driver is reloaded and Network Manager restarted, nm doesn't detect mobile broadband capabilities: + Apr 28 13:28:28 motin-xps nm-system-settings:SCPlugin-Ifupdown: device added (udi: /org/freedesktop/Hal/devices/usb_device_413c_8138_Novatel_Wireless_HSDPA_Modem_if0_serial_usb_0, iface: (null)): iface not found + Apr 28 13:28:28 motin-xps NetworkManager: (ttyUSB1): ignoring due to lack of mobile broadband capabilties + Apr 28 13:28:28 motin-xps NetworkManager: (ttyUSB0): found serial port (udev: hal:GSM) + Apr 28 13:28:28 motin-xps NetworkManager: (ttyUSB0): ignoring due to lack of probed mobile broadband capabilties + + Only a suspend+resume cycle resets the modem to a working state again: + Apr 28 13:51:27 motin-xps NetworkManager: (ttyUSB0): found serial port (udev:GSM hal:GSM) + Apr 28 13:51:27 motin-xps NetworkManager: (ttyUSB0): new Modem device (driver: 'option') + Apr 28 13:51:27 motin-xps NetworkManager: (ttyUSB0): exported as /org/freedesktop/Hal/devices/usb_device_413c_8138_Novatel_Wireless_HSDPA_Modem_if0_serial_usb_0 + + And the modem can be used as usual. + + + Long version (the attachments is in a comment below): + + This is so frustrating, loosing internet connection frequently. + + Modem communication (and thus the current ppp connection) with the Dell + XPS M1330 internal UMTS / HSDPA modem silently drops dead at times + (around 1-4 hours after connection, sometimes 8-10 hours afterwards, + sometimes 0.5h etc - very randomly it seems, but certain for sure), with + no other choice than to suspend and resume the laptop to be able to + connect again. (Not a favorable workaround since suspend fails around 1 + time of 10...) At times that I just have noticed the internet connection dropping dead I have looked in syslog, kern.log and dmesq for a trace of that something particular was logged, but find nothing at all... I tried enabling debug options in ppp option, but the connection process stops before even attempting a ppp connection. - All I can come up with atm is a serial log for when it is not - successful: + In the failed state, without reloading the option-drivers, I performed a nm serial debug log + NetworkManager: [1240826372.112830] nm_serial_device_open(): (ttyUSB0) opening device... + NetworkManager: Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) complete. + NetworkManager: [1240826387.214334] nm_serial_debug(): Sending: 'ATZ E0 V1 X4 &C1 +FCLASS=0 + ' + NetworkManager: [1240826389.419279] nm_serial_debug(): Error: too many retries sending: 'ATZ E0 V1 X4 &C1 +FCLASS=0 + ' + NetworkManager: init_done(): Modem initialization timed out - NetworkManager: (ttyUSB0): device state change: 1 -> 2 - NetworkManager: (ttyUSB0): deactivating device (reason: 2). - NetworkManager: nm_system_device_flush_ip4_routes_with_iface: assertion `iface_idx >= 0' failed - NetworkManager: nm_system_device_flush_ip4_addresses_with_iface: assertion `iface_idx >= 0' failed - NetworkManager: (ttyUSB0): device state change: 2 -> 3 - NetworkManager: Activation (ttyUSB0) starting connection '3' - NetworkManager: (ttyUSB0): device state change: 3 -> 4 - NetworkManager: Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) scheduled... - NetworkManager: Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) started... - NetworkManager: [1240826372.112830] nm_serial_device_open(): (ttyUSB0) opening device... - NetworkManager: Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) complete. - NetworkManager: [1240826387.214334] nm_serial_debug(): Sending: 'ATZ E0 V1 X4 &C1 +FCLASS=0 - ' - NetworkManager: [1240826389.419279] nm_serial_debug(): Error: too many retries sending: 'ATZ E0 V1 X4 &C1 +FCLASS=0 - ' - NetworkManager: init_done(): Modem initialization timed out - NetworkManager: (ttyUSB0): device state change: 4 -> 9 - NetworkManager: [1240826400.001958] nm_serial_device_close(): Closing device 'ttyUSB0' - NetworkManager: Marking connection '3' invalid. - NetworkManager: Activation (ttyUSB0) failed. - NetworkM
[Bug 367856] Re: Contact is lost with internal HSDPA/UMTS modem after some random period - a suspend and wake cycle or a restart is needed to be able to use the modem again
** Attachment added: "non-working-state_option-debug-output-during-modprobe.txt" http://launchpadlibrarian.net/26069307/non-working-state_option-debug-output-during-modprobe.txt -- Contact is lost with internal HSDPA/UMTS modem after some random period - a suspend and wake cycle or a restart is needed to be able to use the modem again https://bugs.launchpad.net/bugs/367856 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 367856] Re: Contact is lost with internal HSDPA/UMTS modem after some random period - a suspend and wake cycle or a restart is needed to be able to use the modem again
@Alexander: That serial log is what is included in the original description. However, since I am now removing parts I don't want treated, then I am removing that serial log... The issue seems to go deeper than that and serial logging just proves that there is something funky with the modem communication. I'll be back soon with an updated description. @smoke: Thanks, but that doesn't look like the same bug at all. I don't even get past this part: NetworkManager: (ttyUSB0): found serial port (udev:GSM hal:GSM) NetworkManager: (ttyUSB0): new Modem device (driver: 'option') Please open a new bug on your case if you are interested of it getting solved. Thanks for the input otherwise! -- Contact is lost with internal HSDPA/UMTS modem after some random period - a suspend and wake cycle or a restart is needed to be able to use the modem again https://bugs.launchpad.net/bugs/367856 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 368556] Re: [dell-xps-specific?] ipw3945: Wireless is not activated after waking up from resume with kill switch enabled
An alternative work-around is to disable+enable the killswitch, then the wireless is detected again. -- [dell-xps-specific?] ipw3945: Wireless is not activated after waking up from resume with kill switch enabled https://bugs.launchpad.net/bugs/368556 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 368556] Re: [dell-xps-specific?] ipw3945: Wireless is not activated after waking up from resume with kill switch enabled
Adding hal to affected packages since it seems wrong for the killswitch detection scripts to rely on /usr/lib/hal/hal-system-smbios --st_wwan for dell laptops when that command always returns 0: mo...@motin-xps:~$ sudo /usr/lib/hal/hal-system-smbios --st_wwan ; echo 0 mo...@motin-xps:~$ # turning off switch - wireless on mo...@motin-xps:~$ sudo /usr/lib/hal/hal-system-smbios --st_wwan ; echo 0 mo...@motin-xps:~$ # turning on switch - wireless off mo...@motin-xps:~$ sudo /usr/lib/hal/hal-system-smbios --st_wwan ; echo 0 ProblemType: Bug Architecture: i386 DistroRelease: Ubuntu 9.04 NonfreeKernelModules: nvidia Package: hal 0.5.12~rc1+git20090403-0ubuntu1 [modified: usr/lib/hal/scripts/linux/hal-system-killswitch-get-power-linux] ProcEnviron: SHELL=/bin/bash PATH=(custom, user) LANG=sv_SE.UTF-8 SourcePackage: hal Uname: Linux 2.6.28-11-generic i686 A typo is fixed in the script: Bug #368553 -- [dell-xps-specific?] ipw3945: Wireless is not activated after waking up from resume with kill switch enabled https://bugs.launchpad.net/bugs/368556 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 368556] Re: [dell-xps-specific?] ipw3945: Wireless is not activated after waking up from resume with kill switch enabled
** Attachment added: "BootDmesg.txt" http://launchpadlibrarian.net/26068626/BootDmesg.txt ** Attachment added: "CurrentDmesg.txt" http://launchpadlibrarian.net/26068627/CurrentDmesg.txt ** Attachment added: "Dependencies.txt" http://launchpadlibrarian.net/26068628/Dependencies.txt ** Attachment added: "HalComputerInfo.txt" http://launchpadlibrarian.net/26068629/HalComputerInfo.txt ** Attachment added: "Lspci.txt" http://launchpadlibrarian.net/26068630/Lspci.txt ** Attachment added: "Lsusb.txt" http://launchpadlibrarian.net/26068631/Lsusb.txt ** Attachment added: "ProcCpuinfo.txt" http://launchpadlibrarian.net/26068632/ProcCpuinfo.txt ** Attachment added: "ProcInterrupts.txt" http://launchpadlibrarian.net/26068635/ProcInterrupts.txt ** Attachment added: "ProcModules.txt" http://launchpadlibrarian.net/26068652/ProcModules.txt ** Also affects: hal (Ubuntu) Importance: Undecided Status: New -- [dell-xps-specific?] ipw3945: Wireless is not activated after waking up from resume with kill switch enabled https://bugs.launchpad.net/bugs/368556 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 368556] [NEW] [dell-xps-specific?] ipw3945: Wireless is not activated after waking up from resume with kill switch enabled
Public bug reported: I need to manually right-click on nm-applet and de-check wireless and check it again, only then will the wireless LED light up and the wireless features start working again. Once I got a kernel panic while doing this, so I am not too fond of that work-around. This is NOT a duplicate of bug #193970 - this handles this specific case and was opened by the suggestion of others in that bug's comments. ProblemType: Bug Architecture: i386 DistroRelease: Ubuntu 9.04 HibernationDevice: RESUME=UUID=99bdff7c-637e-419f-bb4a-a9eb393640e7 MachineType: Dell Inc. XPS M1330 NonfreeKernelModules: nvidia Package: linux-image-2.6.28-11-generic 2.6.28-11.42 ProcCmdLine: root=UUID=f8b235cb-e449-47e0-9de8-01d3c036e835 ro quiet splash ProcEnviron: SHELL=/bin/bash PATH=(custom, user) LANG=sv_SE.UTF-8 ProcVersionSignature: Ubuntu 2.6.28-11.42-generic SourcePackage: linux ** Affects: hal (Ubuntu) Importance: Undecided Status: New ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug i386 -- [dell-xps-specific?] ipw3945: Wireless is not activated after waking up from resume with kill switch enabled https://bugs.launchpad.net/bugs/368556 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 193970] Re: iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
Sure thing. This may be a Dell XPS specific issue. I found a typo in the hal killswitch scripts, affecting the dell-part of this script: Bug #368553 And have opened a new bug report for my specific case here: Bug #368556 -- iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch https://bugs.launchpad.net/bugs/193970 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 368553] Re: [jaunty] [TYPO in script - missing quote] line 81: unexpected EOF while looking for matching `"' /usr/lib/hal/scripts/linux/hal-system-killswitch-get-power-linux: line 84: syntax erro
** Attachment added: "Dependencies.txt" http://launchpadlibrarian.net/26068473/Dependencies.txt -- [jaunty] [TYPO in script - missing quote] line 81: unexpected EOF while looking for matching `"' /usr/lib/hal/scripts/linux/hal-system-killswitch-get-power-linux: line 84: syntax error: unexpected end of file. https://bugs.launchpad.net/bugs/368553 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 368553] [NEW] [jaunty] [TYPO in script - missing quote] line 81: unexpected EOF while looking for matching `"' /usr/lib/hal/scripts/linux/hal-system-killswitch-get-power-linux: line 84: syntax er
Public bug reported: Binary package hint: hal Hopefully this can be (or is already planned) to be included in a SRU: --- /usr/lib/hal/scripts/linux/hal-system-killswitch-get-power-linux/hal-system-killswitch-get-power-linux 2009-04-28 13:46:30.0 +0200 +++ hal-system-killswitch-get-power-linux.patched 2009-04-28 13:49:10.0 +0200 @@ -61,7 +61,7 @@ fi elif [ "$HAL_PROP_KILLSWITCH_TYPE" = "wwan" ]; then if [ "$HAL_PROP_KILLSWITCH_ACCESS_METHOD" = "dell" ]; then - value="`hal-system-smbios --st_wwan` + value="`hal-system-smbios --st_wwan`" if [ "$value" = "0" ]; then exit 1 elif [ "$value" = "1" ]; then ProblemType: Bug Architecture: i386 DistroRelease: Ubuntu 9.04 NonfreeKernelModules: nvidia Package: hal 0.5.12~rc1+git20090403-0ubuntu1 [modified: usr/lib/hal/scripts/linux/hal-system-killswitch-get-power-linux] ProcEnviron: SHELL=/bin/bash PATH=(custom, user) LANG=sv_SE.UTF-8 SourcePackage: hal Uname: Linux 2.6.28-11-generic i686 ** Affects: hal (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug i386 -- [jaunty] [TYPO in script - missing quote] line 81: unexpected EOF while looking for matching `"' /usr/lib/hal/scripts/linux/hal-system-killswitch-get-power-linux: line 84: syntax error: unexpected end of file. https://bugs.launchpad.net/bugs/368553 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 105438] Re: [needs-packaging] jahshaka
I think the project needs to be active to be considered for inclusion in universe - and Jahskaka doesn't seem to be moving forward since about a year when the latest news was posted. Sourceforge releases has not been updated since 2006. -- [needs-packaging] jahshaka https://bugs.launchpad.net/bugs/105438 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 367856] Re: Contact is lost with internal HSDPA/UMTS modem after some random period - a suspend and wake cycle or a restart is needed to be able to use the modem again
I did some more testing, and stopped NetworkManager, killed all pppd, reloaded the option driver, and then instead of: Apr 27 12:54:43 motin-xps NetworkManager: (ttyUSB1): ignoring due to lack of mobile broadband capabilties Apr 27 12:54:43 motin-xps avahi-daemon[4339]: Successfully dropped remaining capabilities. Apr 27 12:54:43 motin-xps NetworkManager: (ttyUSB0): found serial port (udev:GSM hal:GSM) Apr 27 12:54:43 motin-xps NetworkManager: (ttyUSB0): new Modem device (driver: 'option') Apr 27 12:54:43 motin-xps NetworkManager: (ttyUSB0): exported as /org/freedesktop/Hal/devices/usb_device_413c_8138_Novatel_Wireless_HSDPA_Modem_if0_serial_usb_0 ... I got: Apr 27 12:44:19 motin-xps NetworkManager: (ttyUSB1): ignoring due to lack of mobile broadband capabilties Apr 27 12:44:19 motin-xps NetworkManager: (ttyUSB0): found serial port (udev: hal:GSM) Apr 27 12:44:19 motin-xps NetworkManager: (ttyUSB0): ignoring due to lack of probed mobile broadband capabilties What more can I supply? -- Contact is lost with internal HSDPA/UMTS modem after some random period - a suspend and wake cycle or a restart is needed to be able to use the modem again https://bugs.launchpad.net/bugs/367856 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 367856] [NEW] Contact is lost with internal HSDPA/UMTS modem after some random period - a suspend and wake cycle or a restart is needed to be able to use the modem again
Public bug reported: Binary package hint: network-manager This is so frustrating, loosing internet connection frequently: Modem connection (and thus the current ppp connection) with the Dell XPS M1330 internal UMTS / HSDPA modem silently drops dead at times (around 1-4 hours after connection, sometimes 8-10 hours afterwards, sometimes 0.5h etc - very randomly it seems, but certain for sure), with no other choice than to suspend and resume the laptop to be able to connect again. Not a favorable workaround since suspend fails around 1 time of 10... At times that I just have noticed the internet connection dropping dead I have looked in syslog, kern.log and dmesq for a trace of that something particular was logged, but find nothing at all... I tried enabling debug options in ppp option, but the connection process stops before even attempting a ppp connection. All I can come up with atm is a serial log for when it is not successful: NetworkManager: (ttyUSB0): device state change: 1 -> 2 NetworkManager: (ttyUSB0): deactivating device (reason: 2). NetworkManager: nm_system_device_flush_ip4_routes_with_iface: assertion `iface_idx >= 0' failed NetworkManager: nm_system_device_flush_ip4_addresses_with_iface: assertion `iface_idx >= 0' failed NetworkManager: (ttyUSB0): device state change: 2 -> 3 NetworkManager: Activation (ttyUSB0) starting connection '3' NetworkManager: (ttyUSB0): device state change: 3 -> 4 NetworkManager: Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager: Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) started... NetworkManager: [1240826372.112830] nm_serial_device_open(): (ttyUSB0) opening device... NetworkManager: Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) complete. NetworkManager: [1240826387.214334] nm_serial_debug(): Sending: 'ATZ E0 V1 X4 &C1 +FCLASS=0 ' NetworkManager: [1240826389.419279] nm_serial_debug(): Error: too many retries sending: 'ATZ E0 V1 X4 &C1 +FCLASS=0 ' NetworkManager: init_done(): Modem initialization timed out NetworkManager: (ttyUSB0): device state change: 4 -> 9 NetworkManager: [1240826400.001958] nm_serial_device_close(): Closing device 'ttyUSB0' NetworkManager: Marking connection '3' invalid. NetworkManager: Activation (ttyUSB0) failed. NetworkManager: (ttyUSB0): device state change: 9 -> 3 NetworkManager: (ttyUSB0): deactivating device (reason: 0). NetworkManager: nm_system_device_flush_ip4_routes_with_iface: assertion `iface_idx >= 0' failed NetworkManager: nm_system_device_flush_ip4_addresses_with_iface: assertion `iface_idx >= 0' faile And of course, when it is successful, it continues instead of the ERROR with: NetworkManager: [1240826623.265441] nm_serial_debug(): Got: 'ATZ E0 V1 X4 &C1 +FCLASS=0 ' NetworkManager: [1240826623.274204] nm_serial_debug(): Got: 'ATZ E0 V1 X4 &C1 +FCLASS=0 OK ' and continues connections etc. I have disabled the PIN because of another bug, where network manager doesn't realize that the PIN is needed... ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Affects: network-manager (Ubuntu) Importance: Undecided Status: New ** Also affects: linux (Ubuntu) Importance: Undecided Status: New -- Contact is lost with internal HSDPA/UMTS modem after some random period - a suspend and wake cycle or a restart is needed to be able to use the modem again https://bugs.launchpad.net/bugs/367856 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 290177] Re: [huawei/option] NM 0.7: GSM connections won't work with PIN code protected modems - despite having supplied the correct PIN for the connection in nm-connection-editor
Gabriela, Thank you for your comment, but according to your log, your modem uses the hso driver, while as this bug is for huawei/option based modems. To get your issue reported, you will need to open a new bug report. For clarity's sake, please also include a serial log, as described in https://wiki.ubuntu.com/DebuggingNetworkManager#Serial%20Log%20(Mobile%20Broadband) Thanks! -- [huawei/option] NM 0.7: GSM connections won't work with PIN code protected modems - despite having supplied the correct PIN for the connection in nm-connection-editor https://bugs.launchpad.net/bugs/290177 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 193970] Re: iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch
This is not fixed in Jaunty final, at least not for XPS M1330. After having the killswitch enabled (wifi disabled) when waking up from resume, I need to right-click network manager, deactive wireless, then activate it again. Only then the wireless LED lights up again and wireless networks are found. At times when doing this, kernel panic occurs, so I am not to fond of the workaround... This is the same behavior that existed in Intrepid before the SRU that fixed in in the .27 kernel. This is a regression in other words. @Matteo: Try right clicking as I described, it should work and is more convenient than rmmod. ** Changed in: linux (Ubuntu Jaunty) Status: Fix Released => Confirmed -- iwl3945 | iwl4965: Wireless can't be activated after disabling kill switch https://bugs.launchpad.net/bugs/193970 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 278485] Re: If Ubuntu is connected to more than one network (e.g. GSM and wireless) but only GSM has internet access, OS is unable to access internet. NM version 0.7.
As a follow-up on my original message from october 2008: > Adding an option like "Replace default route upon connection" (or preferably "Use this connection to access Internet through while connected") to the network connection options and the configuration guide would solve this issue. Instead, we have a "opposite" option. I feel it would be more intuitive to change the existing option to a checked-by-default option named "Use this connection as default connection (to access Internet) upon connect". Then of course, there is the problem of that when there are two "default" connections, network manager seemingly randomly but consistently chooses the wrong one as the de facto default route to use... Hoping on the two requested features come in later versions... -- If Ubuntu is connected to more than one network (e.g. GSM and wireless) but only GSM has internet access, OS is unable to access internet. NM version 0.7. https://bugs.launchpad.net/bugs/278485 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 278485] Re: If Ubuntu is connected to more than one network (e.g. GSM and wireless) but only GSM has internet access, OS is unable to access internet. NM version 0.7.
Short version: The correct way in the latest versions of network manager is to mark which connections that should be evaluated as default connections in the connections editor. Marking as Fix Released. Long version: To my surprise (and maybe because of bad coverage in documentation, since it seems many people have had this problem and fine-combed google to find a solution), there exists an option that solves this bug in my case, where it only is a problem at home when connecting to my local wireless network in order to share my internet connection, access printer etc (ie not connecting to the internet): In network manager connections editor: Wireless -> Mark my local connection -> Edit -> IPv4 Settings -> Routes -> Use this connection only for resources on its network (If enabled, this connection will never be used as the default network connection) This is a new feature since I started experiencing this issue, so I am marking this bug as Fix Released and instead opening up new bugs for our improvement suggestions. Some new bugs just reported, in order to improve network manager to be more intuitive and flexible on this point: Bug #366774 - Please add new sub-menu "Set default connection" in nm-applet menu with the current active connections, so that default route+DNS can be changed easily Bug #366777 - If the current connection provides internet access, don't change default connection when more device connections become active (Requires that bug #278488 is fixed first though) Then, of course, some documentation / wiki entries about this would not hurt! ** Changed in: network-manager (Ubuntu) Status: Triaged => Fix Released -- If Ubuntu is connected to more than one network (e.g. GSM and wireless) but only GSM has internet access, OS is unable to access internet. NM version 0.7. https://bugs.launchpad.net/bugs/278485 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 278488] Re: Network Manager 0.7 is unable to determine if the connection is local only or instead provides internet access
This feature is still not implemented in Jaunty network manager ** Changed in: network-manager (Ubuntu) Status: Incomplete => Confirmed -- Network Manager 0.7 is unable to determine if the connection is local only or instead provides internet access https://bugs.launchpad.net/bugs/278488 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 366777] [NEW] If the current connection provides internet access, don't change default connection when more device connections become active
Public bug reported: Binary package hint: network-manager This requires that bug #278488 is fixed first. With that feature, providing this logic makes users be able to connect to secondary connections (which may or may not provide internet access) without fear of loosing the current internet connection. ** Affects: network-manager (Ubuntu) Importance: Undecided Status: New -- If the current connection provides internet access, don't change default connection when more device connections become active https://bugs.launchpad.net/bugs/366777 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 366774] [NEW] Please add new sub-menu "Set default connection" in nm-applet menu with the current active connections, so that default route+DNS can be changed easily
Public bug reported: Binary package hint: network-manager With it, we can have more flexible handling of several connections at once as well as prevent the confusion that lead to the reporting of bug #278485, bug #360594 and bug #175326 By judging of the syslog message "Policy set 'Connection name' (interface) as default for routing and DNS. ", this feature is already implemented in network manager and this bug should be easily fixable by adding the menu and assign the appropriate instructions to the nm deamon - no? ** Affects: network-manager (Ubuntu) Importance: Undecided Status: New -- Please add new sub-menu "Set default connection" in nm-applet menu with the current active connections, so that default route+DNS can be changed easily https://bugs.launchpad.net/bugs/366774 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 175326] Re: Networking sets up a default route to every interface
*** This bug is a duplicate of bug 278485 *** https://bugs.launchpad.net/bugs/278485 ** This bug has been marked a duplicate of bug 278485 If Ubuntu is connected to more than one network (e.g. GSM and wireless) but only GSM has internet access, OS is unable to access internet. NM version 0.7. -- Networking sets up a default route to every interface https://bugs.launchpad.net/bugs/175326 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 360594] Re: networkmanager sets wrong default route
*** This bug is a duplicate of bug 278485 *** https://bugs.launchpad.net/bugs/278485 ** This bug has been marked a duplicate of bug 278485 If Ubuntu is connected to more than one network (e.g. GSM and wireless) but only GSM has internet access, OS is unable to access internet. NM version 0.7. -- networkmanager sets wrong default route https://bugs.launchpad.net/bugs/360594 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 222907] Re: tomboy writes to disk every 10 seconds even when idle
Is this really fixed? Using pidstat -d 3 I find tomboy still writes to disk every around 20 seconds: 12.37.09 PID kB_rd/s kB_wr/s kB_ccwr/s Command 12.37.12 5194 0,00 1,33 0,00 tomboy 12.37.27 PID kB_rd/s kB_wr/s kB_ccwr/s Command 12.37.30 5194 0,00 1,33 0,00 tomboy 12.37.48 PID kB_rd/s kB_wr/s kB_ccwr/s Command 12.37.51 5194 0,00 1,33 0,00 tomboy The find command about did not show anything for me, so this may be another similar bug. How do I know? -- tomboy writes to disk every 10 seconds even when idle https://bugs.launchpad.net/bugs/222907 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 334756] Re: [Dell Inc. XPS M1330] suspend/resume failure [non-free: nvidia]
On next wake up failure, please attach the /var/log/pm-suspend.log file if you have one. Thanks! -- [Dell Inc. XPS M1330] suspend/resume failure [non-free: nvidia] https://bugs.launchpad.net/bugs/334756 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 218320] Re: Hangs at "Starting kernel log daemon..." in OpenVZ container
Confirmed. Ctrl + C is necessary to come forward in the install process: Setting up klogd (1.5-1ubuntu1) ... * Stopping kernel log daemon... [ OK ] * Starting kernel log daemon... dpkg: error processing klogd (--configure): subprocess post-installation script killed by signal (Interrupt) Errors were encountered while processing: klogd E: Sub-process /usr/bin/dpkg returned an error code (1) uname -a Linux fantadawarrior 2.6.18-fza-028stab051.1-amd64 #1 SMP Fri Dec 7 15:14:08 UTC 2007 i686 GNU/Linux The syslog deamon works, so if there is any way to disable klogd and only keep syslogd active maybe that would be a solution? ** Summary changed: - package klogd 1.5-1ubuntu1 failed to install/upgrade: + Hangs at "Starting kernel log daemon..." in OpenVZ container ** Description changed: Binary package hint: sysklogd - package klogd 1.5-1ubuntu1 failed to install/upgrade: + In a OpenVZ container: it hangs at restart of the kernel log daemon. + + r...@localhost:/# apt-get install --reinstall klogd + Reading package lists... Done + Building dependency tree + Reading state information... Done + 0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 126 not upgraded. + Need to get 0B/45.9kB of archives. + After unpacking 0B of additional disk space will be used. + Do you want to continue [Y/n]? + (Reading database ... 8982 files and directories currently installed.) + Preparing to replace klogd 1.5-1ubuntu1 (using .../klogd_1.5-1ubuntu1_i386.deb) ... + Unpacking replacement klogd ... + Setting up klogd (1.5-1ubuntu1) ... + * Stopping kernel log daemon... +...done. + * Starting kernel log daemon... + + package klogd 1.5-1ubuntu1 details: ProblemType: Package Architecture: i386 Date: Wed Apr 16 10:42:57 2008 DistroRelease: Ubuntu 8.04 ErrorMessage: ErrorMessage: subprocess post-installation script returned error exit status 1 Package: klogd 1.5-1ubuntu1 PackageArchitecture: i386 SourcePackage: sysklogd Title: package klogd 1.5-1ubuntu1 failed to install/upgrade: Uname: Linux 2.6.24-16-generic i686 + + The only known way to circumvent this is to uninstall the package, which + leaves the container without system logging features active. ** Tags removed: apport-package ** Changed in: sysklogd (Ubuntu) Status: Invalid => Confirmed -- Hangs at "Starting kernel log daemon..." in OpenVZ container https://bugs.launchpad.net/bugs/218320 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 181394] Re: Compiz windows switchers does not display contents of minimized windows
** Summary changed: - Compiz windows switchers does not display minimized windows + Compiz windows switchers does not display contents of minimized windows -- Compiz windows switchers does not display contents of minimized windows https://bugs.launchpad.net/bugs/181394 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 181394] Re: Shift Switcher does not display minimized windows
I second a solution based on a stale image from just before it was minimized + an overlay. This is a major usability issue, and since we cannot wait for X11 to be redesigned, we need to work with what we have so that Compiz windows shifters are as usable as possible. ** Changed in: compiz (Ubuntu) Status: Invalid => Confirmed ** Summary changed: - Shift Switcher does not display minimized windows + Compiz windows switchers does not display minimized windows ** Description changed: Binary package hint: compiz - When there is a minimized window on the screen and i use shift switcher via super + tab the content of the minimized windows is not displayed. + When there is a minimized window on the screen and i use for instance shift switcher via super + tab the content of the minimized windows is not displayed. This is very annoying, because it does not fit and you have to read the title of the window (if you have display titles disabled and you have several minimized windows you can only guess) Here an example: http://img100.imageshack.us/img100/6241/shiftwindowminimizebugng1.png + + The same issue is experienced with the other compiz windows shifters. -- Compiz windows switchers does not display minimized windows https://bugs.launchpad.net/bugs/181394 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 362962] [NEW] Dangerous "lie" - Grub password not changed despite prompt "Password changed!". Running from terminal reveals "stty: standard input: Invalid argument"
Public bug reported: Binary package hint: startupmanager I can only fear how many that think they know their password for the Grub menu (they set it with sum...), just to realized the day they need to go into recovery mode that the password is wrong or even disabled! Please at least fix a proper dialogue like "Password change failed". Thanks. PS It doesn't matter how simple or advanced the password is The full log when attempting password update: $ LANG=C sudo startupmanager Grub2 not detected Version: ImageMagick 6.4.5 2009-01-22 Q16 OpenMP http://www.imagemagick.org Copyright: Copyright (C) 1999-2008 ImageMagick Studio LLC Searching for GRUB installation directory ... found: /boot/grub Searching for default file ... found: /boot/grub/default Testing for an existing GRUB menu.lst file ... found: /boot/grub/menu.lst Searching for splash image ... none found, skipping ... Found kernel: /vmlinuz-2.6.28-11-generic Found kernel: /vmlinuz-2.6.27-11-generic Found kernel: /memtest86+.bin Updating /boot/grub/menu.lst ... Updating the default booting kernel done Grub Legacy detected Usplash detected Splashy not detected stty: standard input: Invalid argument stty: standard input: Invalid argument ** Affects: startupmanager (Ubuntu) Importance: Undecided Status: New -- Dangerous "lie" - Grub password not changed despite prompt "Password changed!". Running from terminal reveals "stty: standard input: Invalid argument" https://bugs.launchpad.net/bugs/362962 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 362962] Re: Dangerous "lie" - Grub password not changed despite prompt "Password changed!". Running from terminal reveals "stty: standard input: Invalid argument"
Note, when I changed it manually instead, in my menu.lst there was "# chainloader +1" on the same row as the password... like so: password --md5 $1$/yk6//$.H7Fgtd5Eo9Hfjuy7dfh61# chainloader+1 -- Dangerous "lie" - Grub password not changed despite prompt "Password changed!". Running from terminal reveals "stty: standard input: Invalid argument" https://bugs.launchpad.net/bugs/362962 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 309747] Re: 3d desktop effects is not (and has yet never been) stable for the majority of hardware/drivers that is used with Ubuntu - Compare with Mac OS X
That bug was marked as a duplicate of bug #254468, which is supposed to have been fixed in Jaunty. Sounds promising. Overall, with Jaunty's X 1.6 and the new Nvidia 180.x drivers, it will be very interesting now to see if this bug is fixed for some Nvidia users at least. I'll report back after 95+ hours more testing... -- 3d desktop effects is not (and has yet never been) stable for the majority of hardware/drivers that is used with Ubuntu - Compare with Mac OS X https://bugs.launchpad.net/bugs/309747 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 183303] Re: Can't create new wireless network using mac80211 based drivers
Leann: You asked about testing this in Intrepid. When nobody returned with feedback it was set as "Incomplete". I just tested this in Jaunty RC and it has not been fixed still... Please don't set to Incomplete again without specifying what we can do in order to make the report complete. Thanks. syslog during network creation attempt: Apr 17 15:04:24 motin-xps NetworkManager: (wlan0): device state change: 8 -> 3 Apr 17 15:04:24 motin-xps NetworkManager: (wlan0): deactivating device (reason: 0). Apr 17 15:04:24 motin-xps NetworkManager: wlan0: canceled DHCP transaction, dhcp client pid 6817 Apr 17 15:04:24 motin-xps NetworkManager: Clearing nscd hosts cache. Apr 17 15:04:24 motin-xps kernel: [ 3006.525406] wlan0: disassociating by local choice (reason=3) Apr 17 15:04:24 motin-xps dnsmasq[3688]: reading /etc/resolv.conf Apr 17 15:04:24 motin-xps dnsmasq[3688]: using nameserver 80.251.201.178#53 Apr 17 15:04:24 motin-xps dnsmasq[3688]: using nameserver 80.251.201.177#53 Apr 17 15:04:24 motin-xps NetworkManager: Clearing nscd hosts cache. Apr 17 15:04:24 motin-xps NetworkManager: Policy set '3' (ppp0) as default for routing and DNS. Apr 17 15:04:24 motin-xps NetworkManager: check_one_route(): (wlan0) error -34 returned from rtnl_route_del(): Sucess Apr 17 15:04:24 motin-xps avahi-daemon[5075]: Withdrawing address record for 192.168.1.2 on wlan0. Apr 17 15:04:24 motin-xps avahi-daemon[5075]: Leaving mDNS multicast group on interface wlan0.IPv4 with address 192.168.1.2. Apr 17 15:04:24 motin-xps kernel: [ 3006.537061] wlan0: deauthenticated Apr 17 15:04:24 motin-xps avahi-daemon[5075]: Interface wlan0.IPv4 no longer relevant for mDNS. Apr 17 15:04:24 motin-xps NetworkManager: Activation (wlan0) starting connection 'MotinXPS' Apr 17 15:04:24 motin-xps NetworkManager: (wlan0): device state change: 3 -> 4 Apr 17 15:04:24 motin-xps NetworkManager: Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled... Apr 17 15:04:24 motin-xps NetworkManager: Activation (wlan0) Stage 1 of 5 (Device Prepare) started... Apr 17 15:04:24 motin-xps NetworkManager: Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled... Apr 17 15:04:24 motin-xps NetworkManager: Activation (wlan0) Stage 1 of 5 (Device Prepare) complete. Apr 17 15:04:24 motin-xps NetworkManager: (wlan0): supplicant connection state: completed -> disconnected Apr 17 15:04:24 motin-xps NetworkManager: Activation (wlan0) Stage 2 of 5 (Device Configure) starting... Apr 17 15:04:24 motin-xps NetworkManager: (wlan0): device state change: 4 -> 5 Apr 17 15:04:24 motin-xps NetworkManager: Activation (wlan0/wireless): connection 'MotinXPS' requires no security. No secrets needed. Apr 17 15:04:24 motin-xps NetworkManager: Config: added 'ssid' value 'MotinXPS' Apr 17 15:04:24 motin-xps NetworkManager: Config: added 'mode' value '1' Apr 17 15:04:24 motin-xps NetworkManager: Config: added 'frequency' value '2412' Apr 17 15:04:24 motin-xps NetworkManager: Config: added 'key_mgmt' value 'NONE' Apr 17 15:04:24 motin-xps NetworkManager: Activation (wlan0) Stage 2 of 5 (Device Configure) complete. Apr 17 15:04:24 motin-xps NetworkManager: Config: set interface ap_scan to 2 Apr 17 15:04:24 motin-xps NetworkManager: (wlan0): supplicant connection state: disconnected -> scanning Apr 17 15:04:24 motin-xps avahi-daemon[5075]: Withdrawing address record for fe80::21f:3bff:febb:ddbf on wlan0. Apr 17 15:04:24 motin-xps kernel: [ 3006.648303] iwlagn: MAC is in deep sleep! Apr 17 15:04:24 motin-xps kernel: [ 3006.932030] Registered led device: iwl-phy0:radio Apr 17 15:04:24 motin-xps kernel: [ 3006.932072] Registered led device: iwl-phy0:assoc Apr 17 15:04:24 motin-xps kernel: [ 3006.932108] Registered led device: iwl-phy0:RX Apr 17 15:04:24 motin-xps kernel: [ 3006.932145] Registered led device: iwl-phy0:TX Apr 17 15:04:24 motin-xps NetworkManager: (wlan0): supplicant connection state: scanning -> associating Apr 17 15:04:25 motin-xps nm-dispatcher.action: Script '/etc/NetworkManager/dispatcher.d/01ifupdown' exited with error status 1. Apr 17 15:04:26 motin-xps avahi-daemon[5075]: Registering new address record for fe80::21f:3bff:febb:ddbf on wlan0.*. Apr 17 15:04:26 motin-xps kernel: [ 3008.988079] wlan0: Trigger new scan to find an IBSS to join Apr 17 15:04:31 motin-xps kernel: [ 3014.085125] wlan0: Trigger new scan to find an IBSS to join Apr 17 15:04:33 motin-xps kernel: [ 3015.267840] wlan0: Creating new IBSS network, BSSID 46:8b:74:a7:bb:19 Apr 17 15:04:33 motin-xps NetworkManager: (wlan0): supplicant connection state: associating -> associated Apr 17 15:04:33 motin-xps NetworkManager: (wlan0): supplicant connection state: associated -> completed Apr 17 15:04:33 motin-xps NetworkManager:
[Bug 300028] Re: [intrepid] Can only login using failsafe Gnome: "unable to open file '/usr/share/apps/kxkb/ubuntu.xmodmap' for reading"
Finally I have had time to look at this more. I compared my install with a chrooted intrepid install with the same packages as my system (so as to get a good reference to default configuration files). I also did the same with a new user on the system, comparing all user settings directories. In the end, I removed these three files: ~/.Xauthority ~/.Xscrc ~/.xsession ...logged out and could log back in without problems! -- [intrepid] Can only login using failsafe Gnome: "unable to open file '/usr/share/apps/kxkb/ubuntu.xmodmap' for reading" https://bugs.launchpad.net/bugs/300028 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 300028] Re: [intrepid] Can only login using failsafe Gnome: "unable to open file '/usr/share/apps/kxkb/ubuntu.xmodmap' for reading"
I have found at least the real bug with my login. .xsession was empty (0 bytes), and the following introduced the bug again: touch ~/.xsession Removing it: rm ~/.xsession ...then enables login again without using the failsafe option. Is this the same for you others? -- [intrepid] Can only login using failsafe Gnome: "unable to open file '/usr/share/apps/kxkb/ubuntu.xmodmap' for reading" https://bugs.launchpad.net/bugs/300028 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 303815] Re: 4>[1266824.056544] WARNING: at /build/buildd/linux-2.6.27/drivers/usb/serial/usb-serial.c:311 serial_write+0xa4/0xb0 [usbserial]()
Also confirmed with a 413c:8138 Dell Computer Corp. Wireless 5520 Voda I Mobile Broadband (3G HSDPA) Minicard EAP-SIM Port on a Dell XPS, running Intrepid. Happens at times (not always) when being connected and disconnecting from the device. For me, it happens after a ppp0 connection has silently stopped working, and I try to re-connect the device. Thus, it is probably related to another bug, but I haven't isolated any particular situation yet. ** Changed in: linux-ports-meta (Ubuntu) Status: New => Confirmed -- 4>[1266824.056544] WARNING: at /build/buildd/linux-2.6.27/drivers/usb/serial/usb-serial.c:311 serial_write+0xa4/0xb0 [usbserial]() https://bugs.launchpad.net/bugs/303815 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 299176] Re: vlc crashed with SIGSEGV in pthread_mutex_l...@plt()
I got this on intrepid when trying to play flv files. This was after installing libavcodec52 and ffmpeg from https://launchpad.net/~baudm/+archive/ppa . Files play well in xine. Gdb backtrace: Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 0xb0e38b90 (LWP 11997)] 0xb7f4990c in pthread_mutex_l...@plt () from /usr/lib/libvlccore.so.0 Current language: auto; currently asm (gdb) thread apply all bt Thread 12 (Thread 0xb0e38b90 (LWP 11997)): #0 0xb7f4990c in pthread_mutex_l...@plt () from /usr/lib/libvlccore.so.0 Thread 11 (Thread 0xb1f5db90 (LWP 11479)): #0 0xb8054430 in __kernel_vsyscall () #1 0xb7eb2167 in poll () from /lib/tls/i686/cmov/libc.so.6 #2 0xb218dc32 in g_main_context_iterate (context=0x9328718, block=1, dispatch=1, self=0x931a448) at /build/buildd/glib2.0-2.18.2/glib/gmain.c:3091 #3 0xb218df61 in IA__g_main_context_iteration (context=0x9328718, may_block=1) at /build/buildd/glib2.0-2.18.2/glib/gmain.c:2841 #4 0xb2e68478 in QEventDispatcherGlib::processEvents () from /usr/lib/libQtCore.so.4 #5 0xb25c8ea5 in ?? () from /usr/lib/libQtGui.so.4 #6 0xb2e3c52a in QEventLoop::processEvents () from /usr/lib/libQtCore.so.4 #7 0xb2e3c6ea in QEventLoop::exec () from /usr/lib/libQtCore.so.4 #8 0xb2e3eda5 in QCoreApplication::exec () from /usr/lib/libQtCore.so.4 #9 0xb252e767 in QApplication::exec () from /usr/lib/libQtGui.so.4 #10 0xb2f819e4 in Init (obj=0x9319f64) at qt4.cpp:434 #11 0xb7f5902d in RunInterface (p_this=0x9319f64) at interface/interface.c:230 #12 0xb7fc7909 in thread_entry (data=0x9310b60) at misc/threads.c:465 #13 0xb7dc850f in start_thread () from /lib/tls/i686/cmov/libpthread.so.0 #14 0xb7ebca0e in clone () from /lib/tls/i686/cmov/libc.so.6 ---Type to continue, or q to quit--- Thread 10 (Thread 0xb38e2b90 (LWP 11433)): #0 0xb8054430 in __kernel_vsyscall () #1 0xb7dcc075 in pthread_cond_wait@@GLIBC_2.3.2 () from /lib/tls/i686/cmov/libpthread.so.0 #2 0xb7ecabbd in pthread_cond_wait () from /lib/tls/i686/cmov/libc.so.6 #3 0xb7fd5955 in __vlc_object_wait (obj=0x9315474) at ../include/vlc_threads.h:320 #4 0xb7249cb8 in Run (obj=0x9315474) at signals.c:141 #5 0xb7f5902d in RunInterface (p_this=0x9315474) at interface/interface.c:230 #6 0xb7fc7909 in thread_entry (data=0x9315540) at misc/threads.c:465 #7 0xb7dc850f in start_thread () from /lib/tls/i686/cmov/libpthread.so.0 #8 0xb7ebca0e in clone () from /lib/tls/i686/cmov/libc.so.6 Thread 9 (Thread 0xb40e3b90 (LWP 11432)): #0 0xb8054430 in __kernel_vsyscall () #1 0xb7e06e10 in sigwait () from /lib/tls/i686/cmov/libc.so.6 #2 0xb7249d5c in SigThread (data=0x9315474) at signals.c:109 #3 0xb7dc850f in start_thread () from /lib/tls/i686/cmov/libpthread.so.0 #4 0xb7ebca0e in clone () from /lib/tls/i686/cmov/libc.so.6 Thread 8 (Thread 0xb48e4b90 (LWP 11431)): #0 0xb8054430 in __kernel_vsyscall () #1 0xb7dcc3a2 in pthread_cond_timedwait@@GLIBC_2.3.2 () from /lib/tls/i686/cmov/libpthread.so.0 #2 0xb7ecac14 in pthread_cond_timedwait () from /lib/tls/i686/cmov/libc.so.6 #3 0xb7fd58e1 in __vlc_object_timedwait (obj=0x931e2a4, deadline=12884901372) at ../include/vlc_threads.h:371 ---Type to continue, or q to quit--- #4 0xb724cfcc in Run (p_intf=0x931e2a4) at screensaver.c:180 #5 0xb7f5902d in RunInterface (p_this=0x931e2a4) at interface/interface.c:230 #6 0xb7fc7909 in thread_entry (data=0x9315ad8) at misc/threads.c:465 #7 0xb7dc850f in start_thread () from /lib/tls/i686/cmov/libpthread.so.0 #8 0xb7ebca0e in clone () from /lib/tls/i686/cmov/libc.so.6 Thread 7 (Thread 0xb50e5b90 (LWP 11430)): #0 0xb8054430 in __kernel_vsyscall () #1 0xb7dcc3a2 in pthread_cond_timedwait@@GLIBC_2.3.2 () from /lib/tls/i686/cmov/libpthread.so.0 #2 0xb7ecac14 in pthread_cond_timedwait () from /lib/tls/i686/cmov/libc.so.6 #3 0xb7fd58e1 in __vlc_object_timedwait (obj=0x931f1ec, deadline=12884901372) at ../include/vlc_threads.h:371 #4 0xb7250e9c in Run (p_intf=0x931f1ec) at inhibit.c:235 #5 0xb7f5902d in RunInterface (p_this=0x931f1ec) at interface/interface.c:230 #6 0xb7fc7909 in thread_entry (data=0x930d290) at misc/threads.c:465 #7 0xb7dc850f in start_thread () from /lib/tls/i686/cmov/libpthread.so.0 #8 0xb7ebca0e in clone () from /lib/tls/i686/cmov/libc.so.6 Thread 6 (Thread 0xb58e6b90 (LWP 11428)): #0 0xb8054430 in __kernel_vsyscall () #1 0xb7dcc075 in pthread_cond_wait@@GLIBC_2.3.2 () from /lib/tls/i686/cmov/libpthread.so.0 #2 0xb7ecabbd in pthread_cond_wait () from /lib/tls/i686/cmov/libc.so.6 #3 0xb7fd5955 in __vlc_object_wait (obj=0x932001c) at ../include/vlc_threads.h:320 #4 0xb7b33965 in Run (p_intf=0x932001c) at hotkeys.c:832 ---Type to continue, or q to quit--- #5 0xb7f5902d in RunInterface (p_this=0x932001c) at interface/interface.c:230 #6 0xb7fc7909 in thread_entry (data=0x9320088) at misc/threads.c:465 #7 0xb7dc850f in start_thread () from /lib/tls/i686/cmov/libpthread.so.0 #8 0xb7ebca0e in clone () from /lib/tls/i686/cmov/libc.so.6 Thread 5 (Thread 0xb60e7b
[Bug 238208] Re: Need MemoryStick driver Ricoh R5C822 chipset
How hard is it to get hacking on a driver for this chipset? As was the case for the Texas Instruments devices: "TI refused to publish a complete datasheet for any of the FlashMedia devices rendering them useless anywhere except M$ Windows" Still, the tifmxx driver was and is being developed. So, can this possibly be done for the Ricoh chipset? Maybe it's even possible to re-use code from the tifmxx driver (MS specifications, code structure etc)? Project page TI driver: http://developer.berlios.de/projects/tifmxx Maybe someone can create a new project in launchpad for this driver, set up the basic driver files etc and at least get a dummy driver up that detects that a MS or xD card has been inserted into the bay - so that we at least can inform the uninformed user that "Sorry, but there are currently no available drivers for MemoryStick or xD cards for your built-in card reader" What about that? -- Need MemoryStick driver Ricoh R5C822 chipset https://bugs.launchpad.net/bugs/238208 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 202490] Re: [Feature Request] Provide a driver for Ricoh R5C822 xD card reader
How hard is it to get hacking on a driver for this chipset? As was the case for the Texas Instruments devices: "TI refused to publish a complete datasheet for any of the FlashMedia devices rendering them useless anywhere except M$ Windows" Still, the tifmxx driver was and is being developed. So, can this possibly be done for the Ricoh chipset? Maybe it's even possible to re-use code from the tifmxx driver (MS specifications, code structure etc)? Project page TI driver: http://developer.berlios.de/projects/tifmxx Maybe someone can create a new project in launchpad for this driver, set up the basic driver files etc and at least get a dummy driver up that detects that a MS or xD card has been inserted into the bay - so that we at least can inform the uninformed user that "Sorry, but there are currently no available drivers for MemoryStick or xD cards for your built-in card reader" What about that? -- [Feature Request] Provide a driver for Ricoh R5C822 xD card reader https://bugs.launchpad.net/bugs/202490 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 220036] Re: Multi-Pointer X Window Server
More information: "What this release doesn't have, however, is X Input 2 or Multi-Pointer X even though MPX had entered the master X Server tree nearly a year ago. A draft of the X Input 2.0 protocol specification is available. These input features are being held off until X Server 1.7 with X.Org 7.5." "It's our prediction that it will be at least July or August before X.Org 7.5 / X Server 1.7 is released, but more than likely it will be out in September." source: http://www.phoronix.com/scan.php?page=article&item=xorg_server_16&num=1 -- Multi-Pointer X Window Server https://bugs.launchpad.net/bugs/220036 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs