Re: [SlimDevices: Unix] could this be a Squeezebox player if pCP will install and work?
kidstypike wrote: > I installed Volumio and the necessary stuff to enable the DAC, however > Volumio is just not up to LMS standards. I didn't really use it long > enough to assess the DAC. > > I installed piCorePlayer, but never got the DAC to work with it. I'm not > Linux literate, and wasn't really up to asking for help at the time. > > Since then it acts as my LMS server only, it's not used as a player > (everything in my signature). I added a deeper baseplate and installed > an M.2 240GB sata drive, then the add-on base and a 1TB 2.5" sata SSD > drive. > > Sorry can't help with the DAC side of things. Did you give the HifiBerryDAC+ driver a try ? This uses the same PCM5122 DAC Chip and may work Jeff *Want a webapp ?* Get SqueezeLite-X ! https://forums.slimdevices.com/showthread.php?108550-Announce-Squeezelite-X=903953=1#post903953 Jeff07971's Profile: http://forums.slimdevices.com/member.php?userid=49290 View this thread: http://forums.slimdevices.com/showthread.php?t=113320 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] could this be a Squeezebox player if pCP will install and work?
ajgg wrote: > This thread seemed to twist into a discussion about remotes. How did you > get on with the nanosound? Does it work with picoreplayer? Which dac > driver did you select? How is the sound? I installed Volumio and the necessary stuff to enable the DAC, however Volumio is just not up to LMS standards. I didn't really use it long enough to assess the DAC. I installed piCorePlayer, but never got the DAC to work with it. I'm not Linux literate, and wasn't really up to asking for help at the time. Since then it acts as my LMS server only, it's not used as a player (everything in my signature). I added a deeper baseplate and installed an M.2 240GB sata drive, then the add-on base and a 1TB 2.5" sata SSD drive. Sorry can't help with the DAC side of things. *Server - LMS 8.3.0 *Pi4B 4GB/Argon one case/pCP 8.1.0 - 75K library, playlists & LMS cache on Sata SSD (ntfs) *Study -* Pi4/Pi screen/pCP 8.1.0 > HiFiBerry DAC HAT > Edifier *Lounge* - Pi2/pCP 8.1.0 > HiFiBerry DIGI+ > Topping E30 > AVI DM5 *Dining Room* - Echo Show 8 *Garage* - Rpi4/pCP/AP mode > Touch > Edifier *Spares* - 1xTouch, 1xSB Radio. 1xSB3, 6xRPi, 1xDAC32, 1xCORE32 kidstypike's Profile: http://forums.slimdevices.com/member.php?userid=10436 View this thread: http://forums.slimdevices.com/showthread.php?t=113320 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] could this be a Squeezebox player if pCP will install and work?
kidstypike wrote: > Absolutely. This thread seemed to twist into a discussion about remotes. How did you get on with the nanosound? Does it work with picoreplayer? Which dac driver did you select? How is the sound? ajgg's Profile: http://forums.slimdevices.com/member.php?userid=72431 View this thread: http://forums.slimdevices.com/showthread.php?t=113320 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Getting Streamer for Audio Input to work with HiFiBerry DAC+ADC
Connection: Close is just an http header, that is correct for this
application.
The issue is definitely the asound.conf. Has this device been
insitu_updated alot. What version was the last image you burned?
This is the default /etc/asound.conf that pCP uses
Code:
# default - Generated by piCorePlayer
pcm.!default {
type plug
slave.pcm "hw:0,0"
}
pcm.pcpinput {
type hw
card Headphones
device 0
}
#---ALSA EQ Below
pcm.sound_device {
type plug
slave.pcm {
type hw
card Headphones
device 0
}
}
ctl.equal {
type equal;
controls "/home/tc/.alsaequal.bin"
library "/usr/local/lib/ladspa/caps.so"
}
pcm.plugequal {
type equal;
slave.pcm "sound_device";
controls "/home/tc/.alsaequal.bin"
library "/usr/local/lib/ladspa/caps.so"
}
pcm.equal {
type plug;
slave.pcm plugequal;
}
Once you update your asound.conf, then go to the tweaks page and scroll
down to the streamer section, and reset the audio device for input using
the box. Expand the more option and then click on the correct input.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
(https://www.paypal.com/cgi-bin/webscr?cmd=_donations=U7JHY5WYHCNRU=GB_code=USD=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted)
if you like the piCorePlayer
paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858
View this thread: http://forums.slimdevices.com/showthread.php?t=115692
___
unix mailing list
unix@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Getting Streamer for Audio Input to work with HiFiBerry DAC+ADC
paul- wrote:
> You can do both input and output at the same time, as long as they are
> at the same bit depth. You might check the alsamixer to make sure that
> the input channel volume is not turned down.
>
> When you tell the player to play the streamer url, if the player is
> showing the time elapsing (For longer than a minute), then the
> streaming system is sending data to LMS..its just that its blank
> data.
>
> Can look at logs, there should be a pcp_streamer.log
The player carries on merrily past 1 minute (forever). Thanks for the
tip on the log. It reads:
Code:
Connect: 20220106175011
GET /S32_LE/44100/2/F HTTP/1.0
Connection: close
Cache-Control: no-cache
Accept: */*
Host: 192.168.2.129:9100
User-Agent: iTunes/4.7.1 (Linux; N; piCore; armv7l-linux; EN; utf8)
SqueezeCenter, Squeezebox Server, Logitech Media Server/8.2.0/1627922070
Icy-Metadata: 1
HTTP/1.0 200 OK
Content-Type: audio/x-flac
icy-br: 1834560
icy-name: pCP pCP line-in (flac)
icy-metadata: 0
ALSA lib pcm.c:2660:(snd_pcm_open_noupdate) Unknown PCM pcpinput
arecord: main:830: audio open error: No such file or directory
Disconnect: 20220106175011
I mentioned in 'my opening post'
(https://forums.slimdevices.com/showthread.php?115692-Getting-Streamer-for-Audio-Input-to-work-with-HiFiBerry-DAC-ADC=1042278=1#post1042278)
that asound.conf looks different from what it used to when I was running
PCP 7.0. My asound.conf is:
Code:
pcm.!default {
# default
type plug;
slave.pcm "hw:0,0";
}
ctl.!default {
type hw card 0
}
Could my problem be that I am missing the following lines from the older
asound.conf? I don't want to mess with asound.conf manually, as it is
generated by PCP. Is it intentional that asound.conf has changed from
PCP 7.0 to 8.0, or has my asound.conf got screwed up somehow?
Code:
pcm.pcpinput {
type hw
card sndrpihifiberry;
device 0;
}
beneix's Profile: http://forums.slimdevices.com/member.php?userid=59783
View this thread: http://forums.slimdevices.com/showthread.php?t=115692
___
unix mailing list
unix@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Getting Streamer for Audio Input to work with HiFiBerry DAC+ADC
You can do both input and output at the same time, as long as they are at the same bit depth. You might check the alsamixer to make sure that the input channel volume is not turned down. When you tell the player to play the streamer url, if the player is showing the time elapsing (For longer than a minute), then the streaming system is sending data to LMS..its just that its blank data. Can look at logs, there should be a pcp_streamer.log piCorePlayer a small player for the Raspberry Pi in RAM. Homepage: https://www.picoreplayer.org Please 'donate' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=U7JHY5WYHCNRU=GB_code=USD=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted) if you like the piCorePlayer paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=115692 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Material Skin on Picoreplayer
whilst i don't disagree, i think PcP is so lightweight that it should cope happily. My current solution is 2 separate Pis, one for playback and one for running material. Confusing the wife with multiple interfaces for the same product never ends well :( PiCorePlayer 7.1 on Allo Digi One Signaturewith (Lounge) PiCorePlayer 8.1 with pi official touchscreen and hifiberry Dig+ (Office) PiCorePlayer 8.1 with pi official touchscreen and hifiberry DAC+(Kitchen) Radio (Bedroom) PiCorePlayer 8.1 with pi official touchscreen and USB DAC (Bedroom) Squeezelite=x (Garage) PiCorePlayer 8.1 with hifiberry AMP+(Patio 2) PiCorePlayer 8.1.1 with hifiberry AMP+(Patio 2) LMS 8.1 on DIY Unraid 6 Server (i5) Squeeze user since the SB1 markiii's Profile: http://forums.slimdevices.com/member.php?userid=63801 View this thread: http://forums.slimdevices.com/showthread.php?t=115697 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Getting Streamer for Audio Input to work with HiFiBerry DAC+ADC
paul- wrote: > Streamer will not use the card util you hit the URL. > > Stop squeezelite from the user interface, so nothing should open the > output side of the card. Then try to stream the URL. Start with S16_LE > (But 16 and 32 bit should work) I've not had any luck with 24bit. > > I've not tested this in a while, but I do have a Dac+ADC here somewhere. Thanks, yes I ran the command while I was streaming. I first tried the 16-bit stream, then the 32-bit stream. While they were streaming, I ran the command and got the output above, suggesting the card was not in use. I don't know if there is something specific about the PCP build that means this is an incorrect way of determining whether the card is in use? beneix's Profile: http://forums.slimdevices.com/member.php?userid=59783 View this thread: http://forums.slimdevices.com/showthread.php?t=115692 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
