Re: inheritance...
2008/4/27 balaji.m.cs [EMAIL PROTECTED]:
BaseFrom extends ActionForm {
private List myList = null;
}
ChildForm extends BaseForm
ChildForm is also BaseForm, it's OOP inheritance, so I don't see the
problem here.
Antonio
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Re: Struts2 Unit Testing
This is a really big question. Just having unit tests does not necessarily mean that your code is any better. Writing good unit tests is an art (for any code, not just Struts 2), and is hard to summarize in a few lines. A good book would be a good place to start. I haven't read too many books on the subject, but I liked Pragmatic Unit Testing in Java with JUnit [1]. I'm by no means a unit testing expert, but here's a few lessons learned from my own experience: - When writing tests for existing code, try not to look at the code you're writing tests for while writing the test. Instead, think of what the code should do for a set of given inputs, and write tests that ensure that the result is as expected. - Use mock frameworks with care. When used correct, it is a good tool to isolate boundaries and make it possible to test units in isolation. When used wrong, you end up with fragile tests that is testing what your code does, instead of testing what your code should do. - Don't get caught up in the code coverage hysteria. Focus on writing good tests instead of how many lines and branches of code you have tested. - Your test code is a part of your production system, so treat it like that. When the test code gets messy, refactor it and keep it on the same level of quality as the rest of your production code. Also, as Jeromy pointed out in another reply, set up a continuous build system so your tests are running all the time. But most of all, experience is important. So jump into it and start writing some tests. Good luck on your testing. Nils-H [1] - http://pragprog.com/titles/utj/pragmatic-unit-testing-in-java-with-junit On Sun, Apr 27, 2008 at 2:41 PM, Frans Thamura [EMAIL PROTECTED] wrote: hi there, i just have several question around unit testing for our project, cimande and we have lack of skill to to unit testing for our core (cimande), and our apps on cimande (postila, papaje, takatu, etc). anyone can share? how to start a good unit testing for Struts2 based application, so our code is good F - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: Struts 2 - Where does all the CPU go
Where are certainly a number of calls through to OGNL within the Freemarker code, so it could still be that. Unfortunately, I have already constant name=struts.freemarker.templatesCache value=true / in my struts.xml I don't see the WARNings you mention in my logs. -Original Message- From: Jeromy Evans [mailto:[EMAIL PROTECTED] Sent: 27 April 2008 04:54 To: Struts Users Mailing List Subject: Re: Struts 2 - Where does all the CPU go Hi Matthew, I'm surprised that you can contribute more to FreeMarker than to than Ognl. Perhaps FreeMarker is still masking the underlying problem as the templates predominately call into the model setup by Struts and most of that model is prepared via OGNL expressions. OGNL does cache expressions though and you would be reusing many of them. Turn on freemarker template caching. This is a cache within struts2, rather than FreeMarker's own cache, that reuses the Template object keyed by name rather than going to the template loader. in struts.properties: struts.freemarker.templatesCache=true 1.5 seconds within the template rendering is still huge though, even with freemarker caching turned off. One of the templates must be calling *something* slow in the struts 2 model. I've always suspected that the guys below were eating up my cycles. 2008-04-27 13:26:58,413 WARN [http-8080-Processor24] [OgnlValueStack] Could not find property [org.apache.tiles.AttributeContext.STACK] 2008-04-27 13:26:58,414 WARN [http-8080-Processor24] [OgnlValueStack] Could not find property [org.apache.tiles.AttributeContext.STACK] 2008-04-27 13:26:58,414 WARN [http-8080-Processor24] [OgnlValueStack] Could not find property [org.apache.catalina.jsp_file] 2008-04-27 13:26:58,851 WARN [http-8080-Processor24] [OgnlValueStack] Could not find property [templateDir] 2008-04-27 13:26:58,852 WARN [http-8080-Processor24] [OgnlValueStack] Could not find property [templateDir] 2008-04-27 13:26:58,852 WARN [http-8080-Processor24] [OgnlValueStack] Could not find property [theme] 2008-04-27 13:26:58,853 WARN [http-8080-Processor24] [OgnlValueStack] Could not find property [theme] 2008-04-27 13:26:58,854 WARN [http-8080-Processor24] [OgnlValueStack] Could not find property [templateDir] 2008-04-27 13:26:58,854 WARN [http-8080-Processor24] [OgnlValueStack] Could not find property [templateDir] 2008-04-27 13:26:58,869 WARN [http-8080-Processor24] [OgnlValueStack] Could not find property [theme] 2008-04-27 13:26:58,870 WARN [http-8080-Processor24] [OgnlValueStack] Could not find property [theme] 2008-04-27 13:26:58,878 WARN [http-8080-Processor24] [OgnlValueStack] Could not find property [.freemarker.Request] 2008-04-27 13:26:58,878 WARN [http-8080-Processor24] [OgnlValueStack] Could not find property [.freemarker.RequestParameters] 2008-04-27 13:26:58,880 WARN [http-8080-Processor24] [OgnlValueStack] Could not find property [commands] 2008-04-27 13:26:59,036 WARN [http-8080-Processor24] [OgnlValueStack] Could not find property [property] 2008-04-27 13:26:59,044 WARN [http-8080-Processor24] [OgnlValueStack] Could not find property [property] 2008-04-27 13:26:59,074 WARN [http-8080-Processor24] [OgnlValueStack] Could not find property [templateDir] 2008-04-27 13:26:59,074 WARN [http-8080-Processor24] [OgnlValueStack] Could not find property [templateDir] 2008-04-27 13:26:59,074 WARN [http-8080-Processor24] [OgnlValueStack] Could not find property [theme] 2008-04-27 13:26:59,074 WARN [http-8080-Processor24] [OgnlValueStack] Could not find property [theme] 2008-04-27 13:26:59,076 WARN [http-8080-Processor24] [OgnlValueStack] Could not find property [templateDir] 2008-04-27 13:26:59,077 WARN [http-8080-Processor24] [OgnlValueStack] Could not find property [templateDir] 2008-04-27 13:26:59,077 WARN [http-8080-Processor24] [OgnlValueStack] Could not find property [theme] 2008-04-27 13:26:59,077 WARN [http-8080-Processor24] [OgnlValueStack] Could not find property [theme] CONFIDENTIALITY - This email and any files transmitted with it, are confidential, may be legally privileged and are intended solely for the use of the individual or entity to whom they are addressed. If this has come to you in error, you must not copy, distribute, disclose or use any of the information it contains. Please notify the sender immediately and delete them from your system. SECURITY - Please be aware that communication by email, by its very nature, is not 100% secure and by communicating with Perform Group by email you consent to us monitoring and reading any such correspondence. VIRUSES - Although this email message has been scanned for the presence of computer viruses, the sender accepts no liability for any damage sustained as a result of a computer virus and it is the recipients responsibility to ensure that email is virus free. AUTHORITY - Any views or opinions expressed in this email are solely those of the
datetimepickers
Hi, I'm trying to capture date and time from a datetimepicker, so I want the date object to contain both date and time. Has anyone come up with a decent solution on how to do this? I would have thought it was a relatively common thing to try and do! Best Regards, Alan. -- -- Alan Nisbet Phone: +44(0)1355 272911 Software EngineerFax: +44(0)1355 272993 Ecebs Limited The Toros Building, Rankin Avenue Scottish Enterprise Technology Park, East Kilbride G75 0QF Email: [EMAIL PROTECTED] United Kingdom Internet: http://www.Ecebs.com This email is only for the use of the addressee. It may contain information which is legally privileged, confidential and exempt from disclosure. If you are not the intended recipient you are hereby notified that any dissemination, distribution, or copying of this communication and its attachments is strictly prohibited. -- - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: migration from struts 1 to 2
Yes. In fact, the Actions are POJO's only if they do not extend the ActionSupport class and dont get hooked into the framework statically. An excellent (meaning precise and sweet) introduction to this migration scenario is here by Ian Roughley: http://www.infoq.com/news/2006/12/struts-migration (unfortunately the pages dont link forward, so this is actually part 3). newton.dave wrote: Just some clarifications. 4. Action Classes b) Make your Action class to extend ActionSupport, instead of Action. While this is not mandatory, it is beneficial to do so because then any POJO can be used as an Action Object. Further we then will have access to predefined tokens such as SUCCESS and ERROR. The reason to extend ActionSupport is to get the default implementations of things like validation and I18N support. Actions are POJOs without extending ActionSupport. Dave - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] -- View this message in context: http://www.nabble.com/migration-from-struts-1-to-2-tp16819256p16933348.html Sent from the Struts - User mailing list archive at Nabble.com. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: Is there such a thing as flash in S2?
Brad A Cupit wrote: Having said that, I question using the session, since redirect-after-post was designed to help alleviate back and refresh button problems. If we store information in the session for the redirect, then the first GET will find that information, but subsequent GETs (perhaps the result of pressing back or refresh) will not find that information, so the GET will have been inconsistent. Precisely. Using the session to store data across a redirect does indeed lead to a misbehaving GET. More importantly, IMHO the need to preserve data this way indicates a design flaw - Redirect was designed to use GET and there are always (perhaps, not-so-easy) alternatives to keep it that way. That said, one occasion when I was forced into using the session this way was when I wrote a custom solution to redirect across HTTP and HTTPS (like when a secure resource is accessed via HTTP) for Struts, working very similar to the SSL plugin. -- View this message in context: http://www.nabble.com/Is-there-such-a-thing-as-flash-in-S2--tp16697840p16935302.html Sent from the Struts - User mailing list archive at Nabble.com. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: Redirect-action parameters via POST
Here are some tests which seemed to have worked with really long URL's. Such as 2K in IE and upto 100,000 characters in Firefox. http://www.boutell.com/newfaq/misc/urllength.html newton.dave wrote: --- ancatdubher [EMAIL PROTECTED] wrote: (Also, the URL is limited to 256 characters length). I've never noticed that limitation; I haven't seen a mainstream browser that wouldn't accept or send anything much less than about 2K, and some will do twice that. Dave - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] -- View this message in context: http://www.nabble.com/Redirect-action-parameters-via-POST-tp16884951p16935375.html Sent from the Struts - User mailing list archive at Nabble.com. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Url tag and automatic parameter setting
Hi, I have a problem--more of an annoyance, really--with struts s:url tag. It adds parameters into the result url without my say-so and I don't really understand on what grounds. For example, I had the following in my jsp page: s:url id=addNewContract action=ajaxEditContract s:param name=decorate value=false / /s:url It evaluated to this: ajaxEditContract.html?id=-3amp;amp;decorate=falseamp;amp;dojo.preventCache=1209372598206amp;amp;committerId=-7 amp;dojo.preventCache=1209372600172amp;decorate=false I can understand it adds the ajax stuff automatically (although I don't know why and when). What I don't understand is, why does it add committerId and id as parameters. Both are available via getters in my action, and committerId is used in the form that comes after I define the url. Id, however, is not used at all in the page. To avoid problems, I have to create the url like this: s:url id=addNewContract action=ajaxEditContract s:param name=decorate value=false / s:param name=id value=null / /s:url To avoid problems in the future, I'd like to understand why exactly does the url tag behave like this. I understand includeParams attribute is used to set how the tag behaves with parameters, but there is no explanation in the tag reference what all and get are supposed to do. Can anyone tell me why does the url tag behave the way it does, or where I could find an explanation?
Re: Struts1 and Struts2 in the same app
Hi Sandy,
How exactly did you do the struts.xml inclusion?
(I had a similar problem, where I found the struts.xml for struts 2 wasn't
picking the correct xml)
And by java source folder - do you mean WEB-INF/classes/ ?
Sandy143 wrote:
I have to integrate struts 2 actions in my existing struts 1.2 web
application.
My login page is using struts 1.2 action. Upon login, I come to home page.
there is a link on home page. when I click on that link, I need to go to
another jsp page. The later action has to be in struts 2.
I have added filter, filter mapping for struts 2 in web.xml.
I have included struts.xml in the root of the project (under java source
folder). This included struts-config.xml (using struts 1.2.8) and
struts-config-two.xml (using struts 2).
-- struts-config.xml is in web-inf
-- struts-config-two.xml is in the root of the project (under java source
folder)
my struts-config-two.xml is :
-
?xml version=1.0 encoding=UTF-8 ?
!DOCTYPE struts PUBLIC
-//Apache Software Foundation//DTD Struts Configuration 2.0//EN
http://struts.apache.org/dtds/struts-2.0.dtd;
struts
package name=xxx namespace=/xxx extends=xxx-default
action name=testAction2
class=x.y.z.presentation.test.TestAction2
result name=home /TestLink.jsp /result
/action
/package
/struts
--
In my TestLink.jsp, I am specifying :
s:url id=viewURL namespace=/xxx action=testAction2 /
s:a href=%{viewURL} Test Link Home /s:a Test Link
-
I am able to login to the app. but When I click on the link I get an error
message : ERROR action.RequestProcessor - Invalid path was requested
/xxx/TestAction.
Can you please help me to resolve this issue.
I would have to use struts2 action in the flow of struts1 action. Please
let me know the step by step procedure. Can anyone provide a sample app or
config info on how it can be done?
I have read the migration tutorial. but it didn't help me to resolve this
issue.
--
View this message in context:
http://www.nabble.com/Struts1-and-Struts2-in-the-same-app-tp16851031p16935666.html
Sent from the Struts - User mailing list archive at Nabble.com.
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Main differences between Struts 1 and Struts 2
Hi, Can anyone tell me what are the main differences between Struts 1 and Struts 2 ? Or point me to links describing them. What was added in version 2 ? Thanks ! === Ce message et toutes les pieces jointes (ci-apres le message) sont confidentiels et etablis a l'intention exclusive de ses destinataires. Toute utilisation ou diffusion non autorisee est interdite. Tout message electronique est susceptible d'alteration. La SOCIETE GENERALE et ses filiales declinent toute responsabilite au titre de ce message s'il a ete altere, deforme ou falsifie. === This message and any attachments (the message) are confidential and intended solely for the addressees. Any unauthorized use or dissemination is prohibited. E-mails are susceptible to alteration. Neither SOCIETE GENERALE nor any of its subsidiaries or affiliates shall be liable for the message if altered, changed or falsified. === - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: Main differences between Struts 1 and Struts 2
2008/4/28 Fernandes Celinio SGCF [EMAIL PROTECTED]: Can anyone tell me what are the main differences between Struts 1 and Struts 2 ? It's faster to say what they have in common: they both are MVC implementations; they both are under the Apache umbrella. The end :-) Antonio - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: Main differences between Struts 1 and Struts 2
http://struts.apache.org/2.x/docs/comparing-struts-1-and-2.html Nils-H On Mon, Apr 28, 2008 at 1:33 PM, Fernandes Celinio SGCF [EMAIL PROTECTED] wrote: Hi, Can anyone tell me what are the main differences between Struts 1 and Struts 2 ? Or point me to links describing them. What was added in version 2 ? Thanks ! === Ce message et toutes les pieces jointes (ci-apres le message) sont confidentiels et etablis a l'intention exclusive de ses destinataires. Toute utilisation ou diffusion non autorisee est interdite. Tout message electronique est susceptible d'alteration. La SOCIETE GENERALE et ses filiales declinent toute responsabilite au titre de ce message s'il a ete altere, deforme ou falsifie. === This message and any attachments (the message) are confidential and intended solely for the addressees. Any unauthorized use or dissemination is prohibited. E-mails are susceptible to alteration. Neither SOCIETE GENERALE nor any of its subsidiaries or affiliates shall be liable for the message if altered, changed or falsified. === - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: Main differences between Struts 1 and Struts 2
:-) This article should help: http://www.infoq.com/news/2006/12/struts-migration Antonio Petrelli-3 wrote: 2008/4/28 Fernandes Celinio SGCF [EMAIL PROTECTED]: Can anyone tell me what are the main differences between Struts 1 and Struts 2 ? It's faster to say what they have in common: they both are MVC implementations; they both are under the Apache umbrella. The end :-) Antonio - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] -- View this message in context: http://www.nabble.com/Main-differences-between-Struts-1-and-Struts-2-tp16937092p16937367.html Sent from the Struts - User mailing list archive at Nabble.com. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: Passing parameters to ftl template with s:param
Hi,
In case anyone is interested
s:param tag only works(for me) when value is defined in body of tag and
not in value attribute
s:param name=date value=fromDate / doesn't work
s:param name=datefromDate/s:param does work
Alan Nisbet wrote:
Hi,
First time poster and relative struts newbie,
I'm trying to create an ftl template that positions two
s:datetimepicker(s) side by side to capture date and time.
I use the s:component tag and define my template shown below. It is
working relatively well however I'm unable to retrieve any parameters
via the ${parameters.myParam} notation (only defaults are being set).
In my JSP I'm using s:param tag to define the parameters.
Can anyone help me?
dateandtime.ftl
---
#include
/${parameters.templateDir}/${parameters.theme}/controlheader.ftl /
@s.dateTimePicker
theme=simple
name=${parameters.dateName?default('fromDate')}
type=date
displayFormat=${parameters.dateFormat?default('dd/MM/')} /
nbsp;
nbsp;
@s.dateTimePicker
theme=simple
name=${parameters.timeName?default('startTime')}
type=time
displayFormat=${parameters.dateFormat?default('HH:mm')} /
#include /${parameters.templateDir}/xhtml/controlfooter.ftl /
**
Best Regards,
Alan.
Best Regards,
Alan.
--
--
Alan Nisbet Phone: +44(0)1355 272911
Software EngineerFax: +44(0)1355 272993
Ecebs Limited
The Toros Building,
Rankin Avenue
Scottish Enterprise Technology Park,
East Kilbride
G75 0QF Email: [EMAIL PROTECTED]
United Kingdom Internet: http://www.Ecebs.com
This email is only for the use of the addressee. It may contain
information which is legally privileged, confidential and exempt
from disclosure. If you are not the intended recipient you are
hereby notified that any dissemination, distribution, or copying
of this communication and its attachments is strictly prohibited.
--
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Re: Passing parameters to ftl template with s:param
If you want to use the value parameter, you must enclose the value
with single quotation marks in addition to double quotation marks. ,
if your value is a string
' value '
The value parameter is assuming you are passing an object. This is
associated with OGNL
What worked for you Alan, putting the value in the body of the tag,
is good . This is the simplest way. Here Struts is assuming you are
working with a string.
I spent a day with this problem. This is noted the param docs
On 4/28/08, Alan Nisbet [EMAIL PROTECTED] wrote:
Hi,
In case anyone is interested
s:param tag only works(for me) when value is defined in body of tag and not
in value attribute
s:param name=date value=fromDate / doesn't work
s:param name=datefromDate/s:param does work
Alan Nisbet wrote:
Hi,
First time poster and relative struts newbie,
I'm trying to create an ftl template that positions two
s:datetimepicker(s) side by side to capture date and time.
I use the s:component tag and define my template shown below. It is
working relatively well however I'm unable to retrieve any parameters via
the ${parameters.myParam} notation (only defaults are being set). In my JSP
I'm using s:param tag to define the parameters.
Can anyone help me?
dateandtime.ftl
---
#include
/${parameters.templateDir}/${parameters.theme}/controlheader.ftl
/
@s.dateTimePicker
theme=simple
name=${parameters.dateName?default('fromDate')}
type=date
displayFormat=${parameters.dateFormat?default('dd/MM/')}
/
nbsp;
nbsp;
@s.dateTimePicker
theme=simple
name=${parameters.timeName?default('startTime')}
type=time
displayFormat=${parameters.dateFormat?default('HH:mm')}
/
#include
/${parameters.templateDir}/xhtml/controlfooter.ftl /
**
Best Regards,
Alan.
Best Regards,
Alan.
--
--
Alan Nisbet Phone: +44(0)1355 272911
Software EngineerFax: +44(0)1355 272993
Ecebs Limited
The Toros Building,
Rankin Avenue
Scottish Enterprise Technology Park,
East Kilbride
G75 0QF Email: [EMAIL PROTECTED]
United Kingdom Internet: http://www.Ecebs.com
This email is only for the use of the addressee. It may contain
information which is legally privileged, confidential and exempt
from disclosure. If you are not the intended recipient you are
hereby notified that any dissemination, distribution, or copying
of this communication and its attachments is strictly prohibited.
--
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
--
Peter
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Struts 2 ResourceBundle Class
Hello, I am new to Struts 2. Our application uses a custom database-backed ResourceBundle. I see that in Struts 2, resource bundle files can be specified using the struts.custom.i18n.resources property. Since we aren't sung resource bundle files, how can I specify the class of our custom ResourceBundle? Thanks!! -Ryan This e-mail message is being sent solely for use by the intended recipient(s) and may contain confidential information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by phone or reply by e-mail, delete the original message and destroy all copies. Thank you.
Struts 2 s:select tag : Unable to retrieve the value in the action
Hi,
I am trying to use the select tag and somehow it does not work as expected.
I am populating a Map with the desired values and using that Map object in the
select tag.
- Start JSP -
s:select value=selectKeyword theme=simple key=selectKeyword
id=selectKeyword name=selectKeyword list=selectKeyword
multiple=true/s:select
- End JSP -
- Start Action Code -
private Map selectKeyword = new HashMap();
public void setSelectKeyword(Map selectKeyword) {
log.debug(LoginAction.class.getName() + : execute() : HERE AFASDFSD);
this.selectKeyword = selectKeyword;
}
public Map getSelectKeyword() {
return selectKeyword;
}
public String execute()
{
selectKeyword = populateHashMap();
return SUCCESS;
}
/* This gets called when I submit the form */
public String saveKeyword()
{
System.out.println(This prints size as 0 : + selectKeyword.size());
}
- End Action Code -
I am able to view the populated list box but when I try to retrieve the value
back in my code, I am not getting any value.
Any idea where I am going wrong?
Binu John
Programmer Analyst,
Infosys Technologies Limited, Pune
Mobile # +919823019001
CAUTION - Disclaimer *
This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely
for the use of the addressee(s). If you are not the intended recipient, please
notify the sender by e-mail and delete the original message. Further, you are
not to copy, disclose, or distribute this e-mail or its contents to any other
person and any such actions are unlawful. This e-mail may contain viruses.
Infosys has taken every reasonable precaution to minimize this risk, but is not
liable for any damage you may sustain as a result of any virus in this e-mail.
You should carry out your own virus checks before opening the e-mail or
attachment. Infosys reserves the right to monitor and review the content of all
messages sent to or from this e-mail address. Messages sent to or from this
e-mail address may be stored on the Infosys e-mail system.
***INFOSYS End of Disclaimer INFOSYS***
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Simplified usage of:@com.company.Constants.StaticCOnstants
hi, we want to access the constants in our jsp page. So we are proceeding as follows: s:text field name=[EMAIL PROTECTED]@STATIC_CONSTANTS1] / the problem with this is that we need to repeat the @com.company.Constants always. So is there a simple way to get this working? I wanted to try out S:bean and s:Push... but no luck... please help. cheers, ravi -- View this message in context: http://www.nabble.com/Simplified-usage-of%3A%40com.company.Constants.StaticCOnstants-tp16941171p16941171.html Sent from the Struts - User mailing list archive at Nabble.com. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: Struts2 Unit Testing
Nils-Helge Garli Hegvik on 28/04/08 09:02, wrote: - Don't get caught up in the code coverage hysteria. Focus on writing good tests instead of how many lines and branches of code you have tested. I've no idea what level of code coverage Nils holds to be hysterical, but I wouldn't take his advice to mean you should avoid code coverage analysis. It's free (at least with cobertura in maven) and it's not time consuming to set up and it's not too difficult to understand. You just need to find the right point on the curve of diminishing returns, at least the right point for you. Code coverage reporting is a good tool to have. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: Struts1 and Struts2 in the same app
In struts.xml, I have
-
include file=/WEB-INF/struts-config.xml /
include file=/struts-config-two.xml /
-
yes! struts.xml is placed in WEB-INF/classes/
Do you have any solution for it?
KonTiki wrote:
Hi Sandy,
How exactly did you do the struts.xml inclusion?
(I had a similar problem, where I found the struts.xml for struts 2 wasn't
picking the correct xml)
And by java source folder - do you mean WEB-INF/classes/ ?
Sandy143 wrote:
I have to integrate struts 2 actions in my existing struts 1.2 web
application.
My login page is using struts 1.2 action. Upon login, I come to home
page. there is a link on home page. when I click on that link, I need to
go to another jsp page. The later action has to be in struts 2.
I have added filter, filter mapping for struts 2 in web.xml.
I have included struts.xml in the root of the project (under java source
folder). This included struts-config.xml (using struts 1.2.8) and
struts-config-two.xml (using struts 2).
-- struts-config.xml is in web-inf
-- struts-config-two.xml is in the root of the project (under java
source folder)
my struts-config-two.xml is :
-
?xml version=1.0 encoding=UTF-8 ?
!DOCTYPE struts PUBLIC
-//Apache Software Foundation//DTD Struts Configuration 2.0//EN
http://struts.apache.org/dtds/struts-2.0.dtd;
struts
package name=xxx namespace=/xxx extends=xxx-default
action name=testAction2
class=x.y.z.presentation.test.TestAction2
result name=home /TestLink.jsp /result
/action
/package
/struts
--
In my TestLink.jsp, I am specifying :
s:url id=viewURL namespace=/xxx action=testAction2 /
s:a href=%{viewURL} Test Link Home /s:a Test Link
-
I am able to login to the app. but When I click on the link I get an
error message : ERROR action.RequestProcessor - Invalid path was
requested /xxx/TestAction.
Can you please help me to resolve this issue.
I would have to use struts2 action in the flow of struts1 action. Please
let me know the step by step procedure. Can anyone provide a sample app
or config info on how it can be done?
I have read the migration tutorial. but it didn't help me to resolve this
issue.
--
View this message in context:
http://www.nabble.com/Struts1-and-Struts2-in-the-same-app-tp16851031p16942822.html
Sent from the Struts - User mailing list archive at Nabble.com.
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
RE: Struts 2 ResourceBundle Class
OK, I answered my own question. Apparently I can use the struts.custom.i18n.resources property and specify the fully-qualified class name of our custom ResourceBundle. -Original Message- From: Asleson, Ryan [mailto:[EMAIL PROTECTED] Sent: Monday, April 28, 2008 9:54 AM To: user@struts.apache.org Subject: Struts 2 ResourceBundle Class Hello, I am new to Struts 2. Our application uses a custom database-backed ResourceBundle. I see that in Struts 2, resource bundle files can be specified using the struts.custom.i18n.resources property. Since we aren't sung resource bundle files, how can I specify the class of our custom ResourceBundle? Thanks!! -Ryan This e-mail message is being sent solely for use by the intended recipient(s) and may contain confidential information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by phone or reply by e-mail, delete the original message and destroy all copies. Thank you. This e-mail message is being sent solely for use by the intended recipient(s) and may contain confidential information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by phone or reply by e-mail, delete the original message and destroy all copies. Thank you. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [struts] params and staticParams
I can't seem to find any indication where this ever wound up from several months ago, but I found the same issue independently after making the (poor) assumption that a statically assigned parameter wouldn't be overridden by a request parameter. I did some searching and found this thread. Like Dale, I've made the same fix in my default interceptor stack and fixed this. To me, this is a potential security issue. It's very handy to define a parameter passed into the action via the action configuration. It's easy to make the assumption that these parameters can't be overwritten by the user. It seems to me the framework should by default be configured with security in mind. So, can anyone tell me where this wound up? I'd just like to add my voice requesting the default order be changed. Dale Newfield wrote: Dale Newfield wrote: Jeromy Evans wrote: Wouldn't it be the case for most people that specify params in the action definition that they wouldn't want those overridden by request params? I don't know the history but I think you make a good point. It a couple more people agree I'll create a JIRA issue and post a patch. Clearly that should have started If a couple... -Dale - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: Struts2 Unit Testing
- Don't get caught up in the code coverage hysteria. Focus on writing good tests instead of how many lines and branches of code you have tested. I've no idea what level of code coverage Nils holds to be hysterical, but I wouldn't take his advice to mean you should avoid code coverage analysis. What I meant is that it can easily be misused. Code coverage is a nice tool for guidance, to identify areas that needs improvement - I use them myself too. But it's easy to get caught up in the idea of increasing the coverage percentage just to increase the percentage of coverage, if you understand what I mean. I don't think looking at a coverage report and write a test just to cover that one line of code will necessarily lead to a better tested code base. As long as you focus on writing good tests, coverage will naturally become better. Nils-H - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: migration from struts 1 to 2
Hello,
Can't we have the existing struts1 actions and struts2 actions in the same
application?
I want to retain my existing web app which is using struts 1.2.8 and tiles
1.1
The new module in the same webapp, I would like to develop using struts2 .
Please let me know if this is something that is possible or not?
Thanks,
Sandy
sukritthareja wrote:
Here are the steps for Migrating from Struts 1 to Struts 2. You are
required to make changes in the below mentioned layers”
1.JARs
- Add Struts 2 JARs in WEB-INF/lib
2.web.xml
- Add following elements to web.xml
?xml version=1.0 encoding=UTF-8?
web-app id=WebApp_ID version=2.4
http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd;
filter
filter-namestruts2/filter-name
filter-class org.apache.struts2.dispatcher.FilterDispatcher
/filter-class
/filter
filter-mapping
filter-namestruts2/filter-name
url-pattern/*/url-pattern
/filter-mapping
listener
listener-class
org.springframework.web.context.ContextLoaderListener
/listener-class
/listener
/web-app
3.struts-config.xml
- Rename “struts-config.xml” to “struts.xml”. Technically, this file in
Struts 2 is more streamlined.
A typical struts-config.xml file of Struts 1 looks like
?xml version=1.0 encoding=ISO-8859-1 ?
!DOCTYPE struts-config PUBLIC
-//Apache Software Foundation//DTD Struts Configuration 1.3//EN
http://struts.apache.org/dtds/struts-config_1_3.dtd
struts-config
form-beans
form-bean name=MyClassForm type=forms.MyClassForm
/form-bean
/form-beans
action-mappings
action path=/MyClass name=MyClassFormtype=actions.MyClassAction
validate=false
forward name=success path=/Index.jsp/
/action
/action-mappings
message-resources parameter=resources/
/struts-config
- Perform the following actions:
a)Replace DTD
b)Replace struts-config tag with struts
c)Include include file=struts-default.xml/
d)Remove the form-beans element
e)Change action-mappings to package name=hello-default
extends=struts-default
f)Update each action element by
- Removing from action element, the “name” attribute.
- Changing the action “path” attribute to “name”
- Changing the action “type” attribute to “class”
- Changing the forward element into a return element
The new struts.xml now looks like
?xml version=1.0 encoding=UTF-8 ?
!DOCTYPE struts PUBLIC
-//Apache Software Foundation//DTD Struts Configuration 2.0//EN
http://struts.apache.org/dtds/struts-2.0.dtd
struts
include file=struts-default.xml/
package name=hello-default extends=struts-default
action name=MyClass class=actions.MyClass
result/Index.jsp/result
/action
/package
/struts
4.Action Classes
A typical ActionForm class in Struts 1 looks like
import org.apache.struts.action.ActionForm;
public class MyClassForm extends ValidatorForm {
private String field1;
public String getField1() {
return field1;
}
public void setField1(String field1) {
this.field1 = field1;
}
}
A typical Action class in Struts 1 looks like
import javax.servlet.http.*;
import org.apache.struts.action.*;
public class MyClassAction extends Action {
public ActionForward execute(
ActionMapping mapping,
ActionForm form,
HttpServletRequest request,
HttpServletResponse response)
throws Exception {
MyClassForm input = (MyClassForm) form;
input.setField1(“Hello”);
return mapping.findForward(“success”);
}
}
a) Copy all the properties from the ActionForm class to the Action class,
and remove the ActionForm class object completely. There is no ActionForm
in Struts-2.
b) Make your Action class to extend ActionSupport, instead of Action.
While this is not mandatory, it is beneficial to do so because then any
POJO can be used as an Action Object. Further we then will have access to
predefined tokens such as SUCCESS and ERROR.
c) The fileds are now a property of the only ActionSupport class. So the
values can be set directly. The way of returning “success” can be modified
to return Action.SUCCESS and return Action.ERROR
The new Action class now looks like
import com.opensymphony.xwork2.ActionSupport;
public class Hello extends ActionSupport {
public String execute() throws Exception {
setMessage(“Hello”);
return Action.SUCCESS;
}
private String field1;
public String getField1() {
return field1;
}
public void setField1(String field1) {
this.field1 =
Re: migration from struts 1 to 2
Yes it is!
Sandy143 wrote:
Hello,
Can't we have the existing struts1 actions and struts2 actions in the same
application?
I want to retain my existing web app which is using struts 1.2.8 and tiles
1.1
The new module in the same webapp, I would like to develop using struts2 .
Please let me know if this is something that is possible or not?
Thanks,
Sandy
sukritthareja wrote:
Here are the steps for Migrating from Struts 1 to Struts 2. You are
required to make changes in the below mentioned layers”
1. JARs
- Add Struts 2 JARs in WEB-INF/lib
2. web.xml
- Add following elements to web.xml
?xml version=1.0 encoding=UTF-8?
web-app id=WebApp_ID version=2.4
http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd;
filter
filter-namestruts2/filter-name
filter-class org.apache.struts2.dispatcher.FilterDispatcher
/filter-class
/filter
filter-mapping
filter-namestruts2/filter-name
url-pattern/*/url-pattern
/filter-mapping
listener
listener-class
org.springframework.web.context.ContextLoaderListener
/listener-class
/listener
/web-app
3. struts-config.xml
- Rename “struts-config.xml” to “struts.xml”. Technically, this file in
Struts 2 is more streamlined.
A typical struts-config.xml file of Struts 1 looks like
?xml version=1.0 encoding=ISO-8859-1 ?
!DOCTYPE struts-config PUBLIC
-//Apache Software Foundation//DTD Struts Configuration 1.3//EN
http://struts.apache.org/dtds/struts-config_1_3.dtd
struts-config
form-beans
form-bean name=MyClassForm type=forms.MyClassForm
/form-bean
/form-beans
action-mappings
action path=/MyClass name=MyClassFormtype=actions.MyClassAction
validate=false
forward name=success path=/Index.jsp/
/action
/action-mappings
message-resources parameter=resources/
/struts-config
- Perform the following actions:
a) Replace DTD
b) Replace struts-config tag with struts
c) Include include file=struts-default.xml/
d) Remove the form-beans element
e) Change action-mappings to package name=hello-default
extends=struts-default
f) Update each action element by
- Removing from action element, the “name” attribute.
- Changing the action “path” attribute to “name”
- Changing the action “type” attribute to “class”
- Changing the forward element into a return element
The new struts.xml now looks like
?xml version=1.0 encoding=UTF-8 ?
!DOCTYPE struts PUBLIC
-//Apache Software Foundation//DTD Struts Configuration 2.0//EN
http://struts.apache.org/dtds/struts-2.0.dtd
struts
include file=struts-default.xml/
package name=hello-default extends=struts-default
action name=MyClass class=actions.MyClass
result/Index.jsp/result
/action
/package
/struts
4. Action Classes
A typical ActionForm class in Struts 1 looks like
import org.apache.struts.action.ActionForm;
public class MyClassForm extends ValidatorForm {
private String field1;
public String getField1() {
return field1;
}
public void setField1(String field1) {
this.field1 = field1;
}
}
A typical Action class in Struts 1 looks like
import javax.servlet.http.*;
import org.apache.struts.action.*;
public class MyClassAction extends Action {
public ActionForward execute(
ActionMapping mapping,
ActionForm form,
HttpServletRequest request,
HttpServletResponse response)
throws Exception {
MyClassForm input = (MyClassForm) form;
input.setField1(“Hello”);
return mapping.findForward(“success”);
}
}
a) Copy all the properties from the ActionForm class to the Action class,
and remove the ActionForm class object completely. There is no ActionForm
in Struts-2.
b) Make your Action class to extend ActionSupport, instead of Action.
While this is not mandatory, it is beneficial to do so because then any
POJO can be used as an Action Object. Further we then will have access to
predefined tokens such as SUCCESS and ERROR.
c) The fileds are now a property of the only ActionSupport class. So the
values can be set directly. The way of returning “success” can be modified
to return Action.SUCCESS and return Action.ERROR
The new Action class now looks like
import com.opensymphony.xwork2.ActionSupport;
public class Hello extends ActionSupport {
public String execute() throws Exception {
setMessage(“Hello”);
return Action.SUCCESS;
}
private String field1;
public String getField1() {
return field1;
}
public void setField1(String field1) {
this.field1 = field1;
}
d). There is a special feature
Re: Struts1 and Struts2 in the same app
You're including the S1 configuration file in the S2 config file?
Dave
--- Sandy143 [EMAIL PROTECTED] wrote:
In struts.xml, I have
-
include file=/WEB-INF/struts-config.xml /
include file=/struts-config-two.xml /
-
yes! struts.xml is placed in WEB-INF/classes/
Do you have any solution for it?
KonTiki wrote:
Hi Sandy,
How exactly did you do the struts.xml inclusion?
(I had a similar problem, where I found the struts.xml for struts 2
wasn't
picking the correct xml)
And by java source folder - do you mean WEB-INF/classes/ ?
Sandy143 wrote:
I have to integrate struts 2 actions in my existing struts 1.2 web
application.
My login page is using struts 1.2 action. Upon login, I come to home
page. there is a link on home page. when I click on that link, I need to
go to another jsp page. The later action has to be in struts 2.
I have added filter, filter mapping for struts 2 in web.xml.
I have included struts.xml in the root of the project (under java source
folder). This included struts-config.xml (using struts 1.2.8) and
struts-config-two.xml (using struts 2).
-- struts-config.xml is in web-inf
-- struts-config-two.xml is in the root of the project (under java
source folder)
my struts-config-two.xml is :
-
?xml version=1.0 encoding=UTF-8 ?
!DOCTYPE struts PUBLIC
-//Apache Software Foundation//DTD Struts Configuration
2.0//EN
http://struts.apache.org/dtds/struts-2.0.dtd;
struts
package name=xxx namespace=/xxx extends=xxx-default
action name=testAction2
class=x.y.z.presentation.test.TestAction2
result name=home /TestLink.jsp
/result
/action
/package
/struts
--
In my TestLink.jsp, I am specifying :
s:url id=viewURL namespace=/xxx action=testAction2 /
s:a href=%{viewURL} Test Link Home /s:a Test Link
-
I am able to login to the app. but When I click on the link I get an
error message : ERROR action.RequestProcessor - Invalid path was
requested /xxx/TestAction.
Can you please help me to resolve this issue.
I would have to use struts2 action in the flow of struts1 action.
Please
let me know the step by step procedure. Can anyone provide a sample app
or config info on how it can be done?
I have read the migration tutorial. but it didn't help me to resolve
this
issue.
--
View this message in context:
http://www.nabble.com/Struts1-and-Struts2-in-the-same-app-tp16851031p16942822.html
Sent from the Struts - User mailing list archive at Nabble.com.
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Re: migration from struts 1 to 2
Thank you very much for the very prompt reply.
If it possible, then How would I differentiate between struts1 action
classes and struts2 action classes (apart from ActionSupport)?
Right now, I am trying to use struts2 action in the flow of struts1 action
classes.
How do I map action classes?
I have struts-config.xml and struts.xml.
What would be the controller in this case?
Please let me know ...
Thanks,
Sanday
Alberto A. Flores wrote:
Yes it is!
Sandy143 wrote:
Hello,
Can't we have the existing struts1 actions and struts2 actions in the
same
application?
I want to retain my existing web app which is using struts 1.2.8 and
tiles
1.1
The new module in the same webapp, I would like to develop using struts2
.
Please let me know if this is something that is possible or not?
Thanks,
Sandy
sukritthareja wrote:
Here are the steps for Migrating from Struts 1 to Struts 2. You are
required to make changes in the below mentioned layers”
1. JARs
- Add Struts 2 JARs in WEB-INF/lib
2. web.xml
- Add following elements to web.xml
?xml version=1.0 encoding=UTF-8?
web-app id=WebApp_ID version=2.4
http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd;
filter
filter-namestruts2/filter-name
filter-class org.apache.struts2.dispatcher.FilterDispatcher
/filter-class
/filter
filter-mapping
filter-namestruts2/filter-name
url-pattern/*/url-pattern
/filter-mapping
listener
listener-class
org.springframework.web.context.ContextLoaderListener
/listener-class
/listener
/web-app
3. struts-config.xml
- Rename “struts-config.xml” to “struts.xml”. Technically, this file in
Struts 2 is more streamlined.
A typical struts-config.xml file of Struts 1 looks like
?xml version=1.0 encoding=ISO-8859-1 ?
!DOCTYPE struts-config PUBLIC
-//Apache Software Foundation//DTD Struts Configuration 1.3//EN
http://struts.apache.org/dtds/struts-config_1_3.dtd
struts-config
form-beans
form-bean name=MyClassForm type=forms.MyClassForm
/form-bean
/form-beans
action-mappings
action path=/MyClass name=MyClassForm
type=actions.MyClassAction
validate=false
forward name=success path=/Index.jsp/
/action
/action-mappings
message-resources parameter=resources/
/struts-config
- Perform the following actions:
a) Replace DTD
b) Replace struts-config tag with struts
c) Include include file=struts-default.xml/
d) Remove the form-beans element
e) Change action-mappings to package name=hello-default
extends=struts-default
f) Update each action element by
- Removing from action element, the “name” attribute.
- Changing the action “path” attribute to “name”
- Changing the action “type” attribute to “class”
- Changing the forward element into a return element
The new struts.xml now looks like
?xml version=1.0 encoding=UTF-8 ?
!DOCTYPE struts PUBLIC
-//Apache Software Foundation//DTD Struts Configuration 2.0//EN
http://struts.apache.org/dtds/struts-2.0.dtd
struts
include file=struts-default.xml/
package name=hello-default extends=struts-default
action name=MyClass class=actions.MyClass
result/Index.jsp/result
/action
/package
/struts
4. Action Classes
A typical ActionForm class in Struts 1 looks like
import org.apache.struts.action.ActionForm;
public class MyClassForm extends ValidatorForm {
private String field1;
public String getField1() {
return field1;
}
public void setField1(String field1) {
this.field1 = field1;
}
}
A typical Action class in Struts 1 looks like
import javax.servlet.http.*;
import org.apache.struts.action.*;
public class MyClassAction extends Action {
public ActionForward execute(
ActionMapping mapping,
ActionForm form,
HttpServletRequest request,
HttpServletResponse response)
throws Exception {
MyClassForm input = (MyClassForm) form;
input.setField1(“Hello”);
return mapping.findForward(“success”);
}
}
a) Copy all the properties from the ActionForm class to the Action
class,
and remove the ActionForm class object completely. There is no
ActionForm
in Struts-2.
b) Make your Action class to extend ActionSupport, instead of Action.
While this is not mandatory, it is beneficial to do so because then any
POJO can be used as an Action Object. Further we then will have access
to
predefined tokens such as SUCCESS and ERROR.
c) The fileds are now a property of the only ActionSupport class. So the
values can be set directly. The way of returning “success” can be
modified
to return Action.SUCCESS and return Action.ERROR
The new Action class now looks like
Re: Struts1 and Struts2 in the same app
yes!
Am I wrong? Please let me know ...how to use both the config files.
I tried that way ...I should be wrong as I remained unsuccessful in using
that way.
I get an error :
ERROR action.RequestProcessor - Invalid path was requested
newton.dave wrote:
You're including the S1 configuration file in the S2 config file?
Dave
--- Sandy143 [EMAIL PROTECTED] wrote:
In struts.xml, I have
-
include file=/WEB-INF/struts-config.xml /
include file=/struts-config-two.xml /
-
yes! struts.xml is placed in WEB-INF/classes/
Do you have any solution for it?
KonTiki wrote:
Hi Sandy,
How exactly did you do the struts.xml inclusion?
(I had a similar problem, where I found the struts.xml for struts 2
wasn't
picking the correct xml)
And by java source folder - do you mean WEB-INF/classes/ ?
Sandy143 wrote:
I have to integrate struts 2 actions in my existing struts 1.2 web
application.
My login page is using struts 1.2 action. Upon login, I come to home
page. there is a link on home page. when I click on that link, I need
to
go to another jsp page. The later action has to be in struts 2.
I have added filter, filter mapping for struts 2 in web.xml.
I have included struts.xml in the root of the project (under java
source
folder). This included struts-config.xml (using struts 1.2.8) and
struts-config-two.xml (using struts 2).
-- struts-config.xml is in web-inf
-- struts-config-two.xml is in the root of the project (under java
source folder)
my struts-config-two.xml is :
-
?xml version=1.0 encoding=UTF-8 ?
!DOCTYPE struts PUBLIC
-//Apache Software Foundation//DTD Struts Configuration
2.0//EN
http://struts.apache.org/dtds/struts-2.0.dtd;
struts
package name=xxx namespace=/xxx
extends=xxx-default
action name=testAction2
class=x.y.z.presentation.test.TestAction2
result name=home /TestLink.jsp
/result
/action
/package
/struts
--
In my TestLink.jsp, I am specifying :
s:url id=viewURL namespace=/xxx action=testAction2 /
s:a href=%{viewURL} Test Link Home /s:a Test Link
-
I am able to login to the app. but When I click on the link I get an
error message : ERROR action.RequestProcessor - Invalid path was
requested /xxx/TestAction.
Can you please help me to resolve this issue.
I would have to use struts2 action in the flow of struts1 action.
Please
let me know the step by step procedure. Can anyone provide a sample
app
or config info on how it can be done?
I have read the migration tutorial. but it didn't help me to resolve
this
issue.
--
View this message in context:
http://www.nabble.com/Struts1-and-Struts2-in-the-same-app-tp16851031p16942822.html
Sent from the Struts - User mailing list archive at Nabble.com.
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
--
View this message in context:
http://www.nabble.com/Struts1-and-Struts2-in-the-same-app-tp16851031p16945340.html
Sent from the Struts - User mailing list archive at Nabble.com.
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Re: Struts1 and Struts2 in the same app
Even if I don't include ... it is the same.
It doesnot invoke struts2 action class.
newton.dave wrote:
You're including the S1 configuration file in the S2 config file?
Dave
--- Sandy143 [EMAIL PROTECTED] wrote:
In struts.xml, I have
-
include file=/WEB-INF/struts-config.xml /
include file=/struts-config-two.xml /
-
yes! struts.xml is placed in WEB-INF/classes/
Do you have any solution for it?
KonTiki wrote:
Hi Sandy,
How exactly did you do the struts.xml inclusion?
(I had a similar problem, where I found the struts.xml for struts 2
wasn't
picking the correct xml)
And by java source folder - do you mean WEB-INF/classes/ ?
Sandy143 wrote:
I have to integrate struts 2 actions in my existing struts 1.2 web
application.
My login page is using struts 1.2 action. Upon login, I come to home
page. there is a link on home page. when I click on that link, I need
to
go to another jsp page. The later action has to be in struts 2.
I have added filter, filter mapping for struts 2 in web.xml.
I have included struts.xml in the root of the project (under java
source
folder). This included struts-config.xml (using struts 1.2.8) and
struts-config-two.xml (using struts 2).
-- struts-config.xml is in web-inf
-- struts-config-two.xml is in the root of the project (under java
source folder)
my struts-config-two.xml is :
-
?xml version=1.0 encoding=UTF-8 ?
!DOCTYPE struts PUBLIC
-//Apache Software Foundation//DTD Struts Configuration
2.0//EN
http://struts.apache.org/dtds/struts-2.0.dtd;
struts
package name=xxx namespace=/xxx
extends=xxx-default
action name=testAction2
class=x.y.z.presentation.test.TestAction2
result name=home /TestLink.jsp
/result
/action
/package
/struts
--
In my TestLink.jsp, I am specifying :
s:url id=viewURL namespace=/xxx action=testAction2 /
s:a href=%{viewURL} Test Link Home /s:a Test Link
-
I am able to login to the app. but When I click on the link I get an
error message : ERROR action.RequestProcessor - Invalid path was
requested /xxx/TestAction.
Can you please help me to resolve this issue.
I would have to use struts2 action in the flow of struts1 action.
Please
let me know the step by step procedure. Can anyone provide a sample
app
or config info on how it can be done?
I have read the migration tutorial. but it didn't help me to resolve
this
issue.
--
View this message in context:
http://www.nabble.com/Struts1-and-Struts2-in-the-same-app-tp16851031p16942822.html
Sent from the Struts - User mailing list archive at Nabble.com.
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
--
View this message in context:
http://www.nabble.com/Struts1-and-Struts2-in-the-same-app-tp16851031p16945436.html
Sent from the Struts - User mailing list archive at Nabble.com.
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Re: Struts1 and Struts2 in the same app
--- Sandy143 [EMAIL PROTECTED] wrote:
Am I wrong? Please let me know ...how to use both the config files.
An included file within struts.xml is expected to be an S2 config, AFAIK.
Were there any error messages in the logs?
If you're using the S1 plugin then the docs at [1] give a decent overview.
There is a known issue with using the S1 plugin with S1.3.8, but you
indicated you were using S1.2; I think you're having some more basic
configuration issues.
If you're not using the S1 plugin I'd assume the two frameworks are running
in parallel: each would require its own configuration, any request mapping
issues are resolved, etc.
Dave
[1] http://struts.apache.org/2.x/docs/struts-1-plugin.html
newton.dave wrote:
You're including the S1 configuration file in the S2 config file?
--- Sandy143 [EMAIL PROTECTED] wrote:
In struts.xml, I have
-
include file=/WEB-INF/struts-config.xml /
include file=/struts-config-two.xml /
-
yes! struts.xml is placed in WEB-INF/classes/
Do you have any solution for it?
KonTiki wrote:
How exactly did you do the struts.xml inclusion?
(I had a similar problem, where I found the struts.xml for struts 2
wasn't
picking the correct xml)
And by java source folder - do you mean WEB-INF/classes/ ?
Sandy143 wrote:
I have to integrate struts 2 actions in my existing struts 1.2 web
application.
My login page is using struts 1.2 action. Upon login, I come to home
page. there is a link on home page. when I click on that link, I need
to
go to another jsp page. The later action has to be in struts 2.
I have added filter, filter mapping for struts 2 in web.xml.
I have included struts.xml in the root of the project (under java
source
folder). This included struts-config.xml (using struts 1.2.8) and
struts-config-two.xml (using struts 2).
-- struts-config.xml is in web-inf
-- struts-config-two.xml is in the root of the project (under java
source folder)
my struts-config-two.xml is :
-
?xml version=1.0 encoding=UTF-8 ?
!DOCTYPE struts PUBLIC
-//Apache Software Foundation//DTD Struts Configuration
2.0//EN
http://struts.apache.org/dtds/struts-2.0.dtd;
struts
package name=xxx namespace=/xxx
extends=xxx-default
action name=testAction2
class=x.y.z.presentation.test.TestAction2
result name=home /TestLink.jsp
/result
/action
/package
/struts
--
In my TestLink.jsp, I am specifying :
s:url id=viewURL namespace=/xxx action=testAction2 /
s:a href=%{viewURL} Test Link Home /s:a Test Link
-
I am able to login to the app. but When I click on the link I get an
error message : ERROR action.RequestProcessor - Invalid path was
requested /xxx/TestAction.
Can you please help me to resolve this issue.
I would have to use struts2 action in the flow of struts1 action.
Please
let me know the step by step procedure. Can anyone provide a sample
app
or config info on how it can be done?
I have read the migration tutorial. but it didn't help me to resolve
this
issue.
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Re: [ANN] Practical Apache Struts2 Web 2.0 Projects
HI! i had the same problem, but I have another problem: When i push the button for save Event... throws this exception: excepción javax.servlet.ServletException: javax.persistence.PersistenceException: org.hibernate.PersistentObjectException: detached entity passed to persist: com.fdar.apress.s2.domain.Location org.apache.struts2.dispatcher.Dispatcher.serviceAction(Dispatcher.java:515) org.apache.struts2.dispatcher.FilterDispatcher.doFilter(FilterDispatcher.java:419) com.opensymphony.module.sitemesh.filter.PageFilter.parsePage(PageFilter.java:118) com.opensymphony.module.sitemesh.filter.PageFilter.doFilter(PageFilter.java:52) org.apache.struts2.dispatcher.ActionContextCleanUp.doFilter(ActionContextCleanUp.java:99) causa raíz javax.persistence.PersistenceException: org.hibernate.PersistentObjectException: detached entity passed to persist: com.fdar.apress.s2.domain.Location org.hibernate.ejb.AbstractEntityManagerImpl.throwPersistenceException(AbstractEntityManagerImpl.java:629) org.hibernate.ejb.AbstractEntityManagerImpl.persist(AbstractEntityManagerImpl.java:218) com.fdar.apress.s2.services.EventServiceImpl.create(EventServiceImpl.java:24) com.fdar.apress.s2.actions.event.SaveEventAction.execute(SaveEventAction.java:32) sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) .. causa raíz org.hibernate.PersistentObjectException: detached entity passed to persist: com.fdar.apress.s2.domain.Location org.hibernate.event.def.DefaultPersistEventListener.onPersist(DefaultPersistEventListener.java:79) org.hibernate.impl.SessionImpl.firePersist(SessionImpl.java:609) org.hibernate.impl.SessionImpl.persist(SessionImpl.java:601) org.hibernate.engine.CascadingAction$8.cascade(CascadingAction.java:295) org.hibernate.engine.Cascade.cascadeToOne(Cascade.java:268) org.hibernate.engine.Cascade.cascadeAssociation(Cascade.java:216) org.hibernate.engine.Cascade.cascadeProperty(Cascade.java:169) .. I need help, i don´t know how resolve this. Thanks. Ian Roughley wrote: I'm not sure, and I'm only taking an educated guess at it being OS/platform-dependent (since a JAR that worked for me had problems for another user). Unfortunately I can't reproduce the error. I'm all for doing the work to fix the problem if someone has the problem and cycles to work through testing it. /Ian Dave Newton wrote: --- Ian Roughley [EMAIL PROTECTED] wrote: The solution provided to me was to change the scope interceptor reference to use a session value of Model rather than model - see below. interceptor-ref name=scope Model partialEvent /interceptor-ref Hmm, why does that fix it? If it's an OS-dependent issue we should fix it for real. Dave - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] -- View this message in context: http://www.nabble.com/-ANN--Practical-Apache-Struts2-Web-2.0-Projects-tp13863084p16945872.html Sent from the Struts - User mailing list archive at Nabble.com. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: Url tag and automatic parameter setting
Jukka Välimaa wrote: Hi, I have a problem--more of an annoyance, really--with struts s:url tag. It adds parameters into the result url without my say-so and I don't really understand on what grounds. For example, I had the following in my jsp page: s:url id=addNewContract action=ajaxEditContract s:param name=decorate value=false / /s:url It evaluated to this: ajaxEditContract.html?id=-3amp;amp;decorate=falseamp;amp;dojo.preventCache=1209372598206amp;amp;committerId=-7 amp;dojo.preventCache=1209372600172amp;decorate=false I can understand it adds the ajax stuff automatically (although I don't know why and when). What I don't understand is, why does it add committerId and id as parameters. Both are available via getters in my action, and committerId is used in the form that comes after I define the url. Id, however, is not used at all in the page. To avoid problems, I have to create the url like this: s:url id=addNewContract action=ajaxEditContract s:param name=decorate value=false / s:param name=id value=null / /s:url To avoid problems in the future, I'd like to understand why exactly does the url tag behave like this. I understand includeParams attribute is used to set how the tag behaves with parameters, but there is no explanation in the tag reference what all and get are supposed to do. Can anyone tell me why does the url tag behave the way it does, or where I could find an explanation? The parameters in the generated URL come from the current request -- i.e. the request that results in the tag being called. With includeParams set to 'get', the URL includes the current request's GET parameters -- i.e. those from the query string -- but not any POST parameters that may be present. With 'all' the URL will include both GET and POST parameters. As you're probably aware, the default is 'get' and can be overridden in your struts.xml / struts.properties. L. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [ANN] Practical Apache Struts2 Web 2.0 Projects
Are you using the OpenSessionInViewFilter? If you aren't, you'll want to. If you are doing that already, you may be trying to persist when you should merge. If you're using Hibernate's API directly, take advantage of Hibernate's saveOrUpdate() method, rather than the JPA merge()/persiste() methods. Jim Kiley Technical Consultant Summa [EMAIL PROTECTED] On Mon, Apr 28, 2008 at 3:50 PM, raxden2 [EMAIL PROTECTED] wrote: HI! i had the same problem, but I have another problem: When i push the button for save Event... throws this exception: excepción javax.servlet.ServletException: javax.persistence.PersistenceException: org.hibernate.PersistentObjectException: detached entity passed to persist: com.fdar.apress.s2.domain.Location org.apache.struts2.dispatcher.Dispatcher.serviceAction(Dispatcher.java:515) org.apache.struts2.dispatcher.FilterDispatcher.doFilter(FilterDispatcher.java:419) com.opensymphony.module.sitemesh.filter.PageFilter.parsePage(PageFilter.java:118) com.opensymphony.module.sitemesh.filter.PageFilter.doFilter(PageFilter.java:52) org.apache.struts2.dispatcher.ActionContextCleanUp.doFilter(ActionContextCleanUp.java:99) causa raíz javax.persistence.PersistenceException: org.hibernate.PersistentObjectException: detached entity passed to persist: com.fdar.apress.s2.domain.Location org.hibernate.ejb.AbstractEntityManagerImpl.throwPersistenceException(AbstractEntityManagerImpl.java:629) org.hibernate.ejb.AbstractEntityManagerImpl.persist(AbstractEntityManagerImpl.java:218) com.fdar.apress.s2.services.EventServiceImpl.create(EventServiceImpl.java:24) com.fdar.apress.s2.actions.event.SaveEventAction.execute(SaveEventAction.java:32) sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) .. causa raíz org.hibernate.PersistentObjectException: detached entity passed to persist: com.fdar.apress.s2.domain.Location org.hibernate.event.def.DefaultPersistEventListener.onPersist(DefaultPersistEventListener.java:79) org.hibernate.impl.SessionImpl.firePersist(SessionImpl.java:609) org.hibernate.impl.SessionImpl.persist(SessionImpl.java:601) org.hibernate.engine.CascadingAction$8.cascade(CascadingAction.java:295) org.hibernate.engine.Cascade.cascadeToOne(Cascade.java:268) org.hibernate.engine.Cascade.cascadeAssociation(Cascade.java:216) org.hibernate.engine.Cascade.cascadeProperty(Cascade.java:169) .. I need help, i don´t know how resolve this. Thanks. Ian Roughley wrote: I'm not sure, and I'm only taking an educated guess at it being OS/platform-dependent (since a JAR that worked for me had problems for another user). Unfortunately I can't reproduce the error. I'm all for doing the work to fix the problem if someone has the problem and cycles to work through testing it. /Ian Dave Newton wrote: --- Ian Roughley [EMAIL PROTECTED] wrote: The solution provided to me was to change the scope interceptor reference to use a session value of Model rather than model - see below. interceptor-ref name=scope Model partialEvent /interceptor-ref Hmm, why does that fix it? If it's an OS-dependent issue we should fix it for real. Dave - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] -- View this message in context: http://www.nabble.com/-ANN--Practical-Apache-Struts2-Web-2.0-Projects-tp13863084p16945872.html Sent from the Struts - User mailing list archive at Nabble.com. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] -- Jim Kiley Technical Consultant | Summa [p] 412.258.3346 [m] 412.445.1729 http://www.summa-tech.com
Re: Struts2 Unit Testing
Nils-Helge Garli Hegvik on 28/04/08 17:51, wrote: - Don't get caught up in the code coverage hysteria. Focus on writing good tests instead of how many lines and branches of code you have tested. I've no idea what level of code coverage Nils holds to be hysterical, but I wouldn't take his advice to mean you should avoid code coverage analysis. What I meant is that it can easily be misused. Code coverage is a nice tool for guidance, to identify areas that needs improvement - I use them myself too. But it's easy to get caught up in the idea of increasing the coverage percentage just to increase the percentage of coverage, if you understand what I mean. I don't think looking at a coverage report and write a test just to cover that one line of code will necessarily lead to a better tested code base. As long as you focus on writing good tests, coverage will naturally become better. You're totally right, that's a good skill to have, along with writing code that can be tested easily. Back to code coverage statistics, high coverage is something I always like to see in other people's code, but not necessarily something I feel is right for my own!!! Seriously though, good coverage statistics on an open source project is a great advert. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
devMode + Windows + Eclipse + Tomcat = not reloading struts.xml
Anyone had issues with devMode not working fully on Windows? I've got constant name=struts.devMode value=true / set and in my Tomcat console log I'm seeing: INFO: Overriding property struts.configuration.xml.reload - old value: false new value: true Windows XP Sun JDK 1.6u6 Eclipse 3.3.2 Tomcat 6.0.16 Tomcat is being controlled and deployed to by Eclipse. Thanks, -Chase - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Struts 1 hidden tag
Hello I am using struts 1 have a Question with the hidden tag. I have a bean named addPartnerGrantModificationForm which has a property called dateStart I want to pass a hidden property named dateStartHidden and give it the value coming from dateStart method of the addPartnerGrantModificationForm bean. How can i do this?? this works html:hidden property=dateStart/ BUT when rendered it is convertint o the following html input type=hidden name=dateStart value=10/19/2007/ I want it to be like this input type=hidden name=dateStartHidden value=10/19/2007/ I've tried various things but none seem to be working :( please help! - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: devMode + Windows + Eclipse + Tomcat = not reloading struts.xml
Chase on 28/04/08 22:14, wrote: Anyone had issues with devMode not working fully on Windows? I've got constant name=struts.devMode value=true / set and in my Tomcat console log I'm seeing: INFO: Overriding property struts.configuration.xml.reload - old value: false new value: true Windows XP Sun JDK 1.6u6 Eclipse 3.3.2 Tomcat 6.0.16 Tomcat is being controlled and deployed to by Eclipse. Not fully working? Is it showing any devMode signs? ResourceBundle? struts.xml? Extra logging? - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
struts2 displayTag how to use checkBox; Problem: translating the fieldValue
Hi all,
I have a table with a list of buyers. Each buyer has a checkBox that the
user can click and decide if he wants to work with them.
I'm using displayTag and this is my code:
display:columns:checkbox theme=simple name=userCheck
fieldValue='${entityId}'//display:column
I wonder why I don't get the *value/content* of the userCheck. Instead, I
get ${entityId} (this really very string)
any idea how to get the entityId (the number)?
thank you!
--
View this message in context:
http://www.nabble.com/struts2---displayTag-how-to-use-checkBox--Problem%3A-translating-the-fieldValue-tp16945993p16945993.html
Sent from the Struts - User mailing list archive at Nabble.com.
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Re: Simplified usage of:@com.company.Constants.StaticCOnstants
http://struts.apache.org/2.x/docs/set.html On Mon, 2008-04-28 at 08:17 -0700, ravi_eze wrote: hi, we want to access the constants in our jsp page. So we are proceeding as follows: s:text field name=[EMAIL PROTECTED]@STATIC_CONSTANTS1] / the problem with this is that we need to repeat the @com.company.Constants always. So is there a simple way to get this working? I wanted to try out S:bean and s:Push... but no luck... please help. cheers, ravi - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Removing package name all over does not work
Hello Group, I am working with the preliminary HelloWorld.java example and removed the very first line in HelloWorld.java i.e I commented out package tutorial; Thereafter I modified the struts.xml file and it looks like !DOCTYPE struts PUBLIC -//Apache Software Foundation//DTD Struts Configuration 2.0//EN http://struts.apache.org/dtds/struts-2.0.dtd;struts package name= extends=struts-default action name=HelloWorld class=HelloWorld result/HelloWorld.jsp/result /action !-- Add your actions here -- /package/struts What does the name in package name= extends=struts-default mean? I compiled my HelloWorld.java and put the HelloWorld.class in the WEB-INF/classes directory. Then I tried deploying it through localhost:8080/HelloWorld.action It gives errors as The requested resoruce (/HelloWorld.action) is not available. However, if I put the package name back in all those places and run it like localhost:8080/tutorial/HelloWorld.action Then it works perfectly. For compiling I am always using javac -d classpath javafile Can someone please tell me what happens why does it not work if I take away the package name from all the places. -- Thanks Nagrik
Re: devMode + Windows + Eclipse + Tomcat = not reloading struts.xml
Adam Hardy wrote: Chase on 28/04/08 22:14, wrote: Anyone had issues with devMode not working fully on Windows? I've got constant name=struts.devMode value=true / set and in my Tomcat console log I'm seeing: INFO: Overriding property struts.configuration.xml.reload - old value: false new value: true Windows XP Sun JDK 1.6u6 Eclipse 3.3.2 Tomcat 6.0.16 Tomcat is being controlled and deployed to by Eclipse. Not fully working? Is it showing any devMode signs? ResourceBundle? struts.xml? Extra logging? Yes, for instance I'm getting the Struts Problem Report page instead of the basic 404 pages. I haven't check ResourceBundles yet. Same project and versions of Struts/Tomcat/Eclipse on a Linux box work with no problem. I'm just not seeing struts.xml reloading on Windows systems. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
War file does not deploy
Hello Group, In my server.xml the appbase is webapps and I have copied a mailreader.war file in webapps directory However the following url does not work in tomcat localhost:8080/mailreader.war It says The requested resource (/mailreader.war) is not available. -- Thanks Nagrik
Re: Removing package name all over does not work
Is the Java class being deployed to the proper location? If you just deleted the package statement w/o moving the file to the appropriate directory you might run into problems. Do you have debugging turned up and/or struts.devMode turned on? Dave --- Vinay Nagrik [EMAIL PROTECTED] wrote: I am working with the preliminary HelloWorld.java example and removed the very first line in HelloWorld.java i.e I commented out package tutorial; Thereafter I modified the struts.xml file and it looks like !DOCTYPE struts PUBLIC -//Apache Software Foundation//DTD Struts Configuration 2.0//EN http://struts.apache.org/dtds/struts-2.0.dtd;struts package name= extends=struts-default action name=HelloWorld class=HelloWorld result/HelloWorld.jsp/result /action !-- Add your actions here -- /package/struts What does the name in package name= extends=struts-default mean? I compiled my HelloWorld.java and put the HelloWorld.class in the WEB-INF/classes directory. Then I tried deploying it through localhost:8080/HelloWorld.action It gives errors as The requested resoruce (/HelloWorld.action) is not available. However, if I put the package name back in all those places and run it like localhost:8080/tutorial/HelloWorld.action Then it works perfectly. For compiling I am always using javac -d classpath javafile Can someone please tell me what happens why does it not work if I take away the package name from all the places. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: War file does not deploy
--- Vinay Nagrik [EMAIL PROTECTED] wrote: In my server.xml the appbase is webapps and I have copied a mailreader.war file in webapps directory However the following url does not work in tomcat localhost:8080/mailreader.war It says The requested resource (/mailreader.war) is not available. How familiar are you with Java web application programming? Dave - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: Removing package name all over does not work
Vinay, You are talking about two different things... First off, in the java source file, the statement 'package tutorial;' relates to the following http://java.sun.com/docs/books/tutorial/java/package/packages.html In struts2, the package declaration is a way to logically organize your actions. It is documented here - http://struts.apache.org/2.x/docs/package-configuration.html -Wes On Mon, 2008-04-28 at 17:32 -0700, Vinay Nagrik wrote: Hello Group, I am working with the preliminary HelloWorld.java example and removed the very first line in HelloWorld.java i.e I commented out package tutorial; Thereafter I modified the struts.xml file and it looks like !DOCTYPE struts PUBLIC -//Apache Software Foundation//DTD Struts Configuration 2.0//EN http://struts.apache.org/dtds/struts-2.0.dtd;struts package name= extends=struts-default action name=HelloWorld class=HelloWorld result/HelloWorld.jsp/result /action !-- Add your actions here -- /package/struts What does the name in package name= extends=struts-default mean? I compiled my HelloWorld.java and put the HelloWorld.class in the WEB-INF/classes directory. Then I tried deploying it through localhost:8080/HelloWorld.action It gives errors as The requested resoruce (/HelloWorld.action) is not available. However, if I put the package name back in all those places and run it like localhost:8080/tutorial/HelloWorld.action Then it works perfectly. For compiling I am always using javac -d classpath javafile Can someone please tell me what happens why does it not work if I take away the package name from all the places. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: War file does not deploy
Vinay, did you try - http://localhost:8080/mailreader/ ? On Mon, 2008-04-28 at 17:46 -0700, Vinay Nagrik wrote: Hello Group, In my server.xml the appbase is webapps and I have copied a mailreader.war file in webapps directory However the following url does not work in tomcat localhost:8080/mailreader.war It says The requested resource (/mailreader.war) is not available. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
jsp page with s:action to call an action with a redirect-action
Hi, I have a problem where I have a page (let's call it a.jsp) which calls an action using s:action (let's call it actionB in namepaceB) which redirects to actionA in namespaceA, using redirect-action, which display the name attribute in object a. (both implements modelDriven). actionB take parameter b.id to find the object b. actionA take parameter a.blahId to find object a. so in my struts.xml I have the following setup. package name=namespaceA namespace=/namespaceA action name=actionA method=doGetA class=com.thingybob.AStuff resultshow_name.jsp/result /action /package package name=namespaceB namespace=/namespaceB action name=actionB method=doGetB class=com.thingybob.BStuff result type=redirect-action actionA namespaceA b.thingyId /result /action /package Now it works fine when I call it by going to the url http://XXX/namespaceB/actionB.action?b.id=123 but when I call it from a jsp using s:action like below, it would do the method for actionB but not continue to do actionA. %@ taglib prefix=s uri=/struts-tags % s:action name=actionB namespace=/namespaceB executeResult=true s:param name=b.id123/s:param /s:action Any clue on why it doesn't work and how I can get it to work? Thanks! CC -- View this message in context: http://www.nabble.com/jsp-page-with-s%3Aaction-to-call-an-action-with-a-redirect-action-tp16951812p16951812.html Sent from the Struts - User mailing list archive at Nabble.com. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: Struts 2 s:select tag : Unable to retrieve the value in theaction
This does not help. :(
I tried using the setter method as below
void setSelectKeyword(String[] selectKeyword) {
log.debug(LoginAction.class.getName() + : execute() : Checkpoint 1);
this.temp = selectKeyword;
}
But the log statement even does not gets printed. That means that the setter is
not even getting called.
Also in the code fragment that you suggested, you specified that
selectedKeyword is what is selected. How do we configure that?
Do we have to set some parameter to make sure that the values in the list are
getting written back using the setter?
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Tuesday, April 29, 2008 6:47 AM
To: Binu John
Subject: Struts 2 s:select tag : Unable to retrieve the value in theaction
1. Make sure all the options you want are selected. (e.g. if your selectKeyword
list contains all the entry that you want to be selected then make sure they
are all highlighted when you submit the form maybe via a javascript).
2. Try getting it back as an Array of something instead.
i.e. (assuming 1. doesn't apply. I have selectKeyword as the source to select
from and selectedKeyword which is what is selected)
private String[] selectedKeyword;
public void setSelectedKeyword(String[] selectedKeyword) {
log.debug(LoginAction.class.getName() + : execute() : HERE
AFASDFSD);
this.selectedKeyword = selectedKeyword;
}
public String saveKeyword()
{
System.out.println(selectedKeywords: +
selectedKeyword);
}
Hope that helps.
Binu John wrote:
Hi,
I am trying to use the select tag and somehow it does not work as
expected.
I am populating a Map with the desired values and using that Map object in
the select tag.
- Start JSP -
s:select value=selectKeyword theme=simple key=selectKeyword
id=selectKeyword name=selectKeyword list=selectKeyword
multiple=true/s:select
- End JSP -
- Start Action Code -
private Map selectKeyword = new HashMap();
public void setSelectKeyword(Map selectKeyword) {
log.debug(LoginAction.class.getName() + : execute() : HERE
AFASDFSD);
this.selectKeyword = selectKeyword;
}
public Map getSelectKeyword() {
return selectKeyword;
}
public String execute()
{
selectKeyword = populateHashMap();
return SUCCESS;
}
/* This gets called when I submit the form */
public String saveKeyword()
{
System.out.println(This prints size as 0 : +
selectKeyword.size());
}
- End Action Code -
I am able to view the populated list box but when I try to retrieve the
value back in my code, I am not getting any value.
Any idea where I am going wrong?
Binu John
Programmer Analyst,
Infosys Technologies Limited, Pune
Mobile # +919823019001
CAUTION - Disclaimer *
This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended
solely for the use of the addressee(s). If you are not the intended
recipient, please notify the sender by e-mail and delete the original
message. Further, you are not to copy, disclose, or distribute this e-mail
or its contents to any other person and any such actions are unlawful.
This e-mail may contain viruses. Infosys has taken every reasonable
precaution to minimize this risk, but is not liable for any damage you may
sustain as a result of any virus in this e-mail. You should carry out your
own virus checks before opening the e-mail or attachment. Infosys reserves
the right to monitor and review the content of all messages sent to or
from this e-mail address. Messages sent to or from this e-mail address may
be stored on the Infosys e-mail system.
***INFOSYS End of Disclaimer INFOSYS***
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Quoted from:
http://www.nabble.com/Struts-2-%3Cs%3Aselect%3E-tag-%3A-Unable-to-retrieve-the-value-in-the-action-tp16940747p16940747.html
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Re: inheritance...
ya its not a problem but i am asking can we able to reffer a childform bean
object specified in struts config with the baseform reference.. in the time
of rendering into a jsp...?
form-bean name=baseform type=mypkg.form.BaseForm/
form-bean name=childform type=mypkg.form.ChildForm/
Antonio Petrelli-3 wrote:
2008/4/27 balaji.m.cs [EMAIL PROTECTED]:
BaseFrom extends ActionForm {
private List myList = null;
}
ChildForm extends BaseForm
ChildForm is also BaseForm, it's OOP inheritance, so I don't see the
problem here.
Antonio
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
--
View this message in context:
http://www.nabble.com/inheritance...-tp16926881p16952816.html
Sent from the Struts - User mailing list archive at Nabble.com.
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
error page and tiles.
i want to show an error page with a application error messages 2 the users when there is an technical error... i am using tiles 1.2 with struts 1.3.5 when there is an error in a jsp tile say a body part or a left part the error page is replaced @ that particular tile is there any way to show the full error page rather than replacing the particular tile part... of the layout. -- View this message in context: http://www.nabble.com/error-page-and-tiles.-tp16952850p16952850.html Sent from the Struts - User mailing list archive at Nabble.com. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
nested tags in velocity
Does anyone know how to use nested tags in velocity, like building a url? I have tried many, many combinations of the form: #surl ... #sparam ... #end #end and can't seem to get it right. (and google is no giving me any love on this one) musachy -- Hey you! Would you help me to carry the stone? Pink Floyd - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: jsp page with s:action to call an action with a redirect-action
Currently I have made a work around by assigning the result for actionB to b.jsp which invoke actionA using another s:action and parsing the parameter through using s:param. I just thought perhaps you can just redirect action without a page in between the two actions. Oh well. cheers. -- View this message in context: http://www.nabble.com/jsp-page-with-s%3Aaction-to-call-an-action-with-a-redirect-action-tp16951812p16952874.html Sent from the Struts - User mailing list archive at Nabble.com. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: datetimepickers
Alan Nisbet wrote: Hi, I'm trying to capture date and time from a datetimepicker, so I want the date object to contain both date and time. Has anyone come up with a decent solution on how to do this? I would have thought it was a relatively common thing to try and do! Best Regards, Alan. It's a matter of ensuring the param you post to your action is in the appropriate datetime format supported by the date converter (eg. RFC3339). You can assemble the param from multiple inputs/widgets on the client side using javascript prior to posting a form (and after loading a page for the reverse) The datetimepicker widget itself does not support selection of both date and time. You need multiple widgets and you'll need to format/parse the param in javascript yourself. You may be less effort to use a date and time picker from a javascript library that supports this already. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: Simplified usage of:@com.company.Constants.StaticCOnstants
hi, i tried this way: s:set name=C value=@com.company.Constants / s:property value=[EMAIL PROTECTED] / but its not working nor it throws an exception if its wrong way of doing. any help? cheers, ravi Wes Wannemacher wrote: http://struts.apache.org/2.x/docs/set.html On Mon, 2008-04-28 at 08:17 -0700, ravi_eze wrote: hi, we want to access the constants in our jsp page. So we are proceeding as follows: s:text field name=[EMAIL PROTECTED]@STATIC_CONSTANTS1] / the problem with this is that we need to repeat the @com.company.Constants always. So is there a simple way to get this working? I wanted to try out S:bean and s:Push... but no luck... please help. cheers, ravi - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] -- View this message in context: http://www.nabble.com/Simplified-usage-of%3A%40com.company.Constants.StaticCOnstants-tp16941171p16952906.html Sent from the Struts - User mailing list archive at Nabble.com. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Context Root for Image Button src attribute
I am trying to write an image button of the form: s:submit type=image src=context-root/images/search1.gif name=search/ where context-root is the configured context root of my web application. Can anyone suggest a good way to dynamically populate the context root? I am assuming that the src string is being interpreted via OGNL but I can't figure out an appropriate expression to use to extract the context root from the request. -- View this message in context: http://www.nabble.com/Context-Root-for-Image-Button-src-attribute-tp16952908p16952908.html Sent from the Struts - User mailing list archive at Nabble.com. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: Simplified usage of:@com.company.Constants.StaticCOnstants
I think it may need to be: s:set name=C value=@com.company.Constants@ / s:property value=#C.staticconstant / But I haven't tried it myself. (*Chris*) On Mon, Apr 28, 2008 at 9:44 PM, ravi_eze [EMAIL PROTECTED] wrote: hi, i tried this way: s:set name=C value=@com.company.Constants / s:property value=[EMAIL PROTECTED] / but its not working nor it throws an exception if its wrong way of doing. any help? cheers, ravi Wes Wannemacher wrote: http://struts.apache.org/2.x/docs/set.html On Mon, 2008-04-28 at 08:17 -0700, ravi_eze wrote: hi, we want to access the constants in our jsp page. So we are proceeding as follows: s:text field name=[EMAIL PROTECTED]@STATIC_CONSTANTS1] / the problem with this is that we need to repeat the @com.company.Constants always. So is there a simple way to get this working? I wanted to try out S:bean and s:Push... but no luck... please help. cheers, ravi - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] -- View this message in context: http://www.nabble.com/Simplified-usage-of%3A%40com.company.Constants.StaticCOnstants-tp16941171p16952906.html Sent from the Struts - User mailing list archive at Nabble.com. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[Struts2] Exception starting filter (Connection Timed Out)
Just moving from Struts1 to Struts2.0.11. No problem on Tomcat 6.0.16. However, I get the following exception on startup with Tomcat 6.0.14. Does anyone know a way round this? (I've included excerpts from web.xml further down.) *** EXCEPTION TRACE: *** 2008/04/29 00:59:30 | Apr 29, 2008 12:59:30 AM org.apache.catalina.core.StandardContext filterStart 2008/04/29 00:59:30 | SEVERE: Exception starting filter action2 2008/04/29 00:59:30 | [unknown location] 2008/04/29 00:59:30 | at com.opensymphony.xwork2.config.providers.XmlConfigurationProvider.loadConfigurationFiles(XmlConfigurationProvider.java:835) 2008/04/29 00:59:30 | at com.opensymphony.xwork2.config.providers.XmlConfigurationProvider.loadDocuments(XmlConfigurationProvider.java:131) 2008/04/29 00:59:30 | at com.opensymphony.xwork2.config.providers.XmlConfigurationProvider.init(XmlConfigurationProvider.java:100) 2008/04/29 00:59:30 | at com.opensymphony.xwork2.config.impl.DefaultConfiguration.reload(DefaultConfiguration.java:130) 2008/04/29 00:59:30 | at com.opensymphony.xwork2.config.ConfigurationManager.getConfiguration(ConfigurationManager.java:52) 2008/04/29 00:59:30 | at org.apache.struts2.dispatcher.Dispatcher.init_PreloadConfiguration(Dispatcher.java:395) 2008/04/29 00:59:30 | at org.apache.struts2.dispatcher.Dispatcher.init(Dispatcher.java:452) 2008/04/29 00:59:30 | at org.apache.struts2.dispatcher.FilterDispatcher.init(FilterDispatcher.java:201) 2008/04/29 00:59:30 | at org.apache.catalina.core.ApplicationFilterConfig.getFilter(ApplicationFilterConfig.java:275) 2008/04/29 00:59:30 | at org.apache.catalina.core.ApplicationFilterConfig.setFilterDef(ApplicationFilterConfig.java:397) 2008/04/29 00:59:30 | at org.apache.catalina.core.ApplicationFilterConfig.init(ApplicationFilterConfig.java:108) 2008/04/29 00:59:30 | at org.apache.catalina.core.StandardContext.filterStart(StandardContext.java:3696) 2008/04/29 00:59:30 | at org.apache.catalina.core.StandardContext.start(StandardContext.java:4343) 2008/04/29 00:59:30 | at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1045) 2008/04/29 00:59:30 | at org.apache.catalina.core.StandardHost.start(StandardHost.java:719) 2008/04/29 00:59:30 | at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1045) 2008/04/29 00:59:30 | at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443) 2008/04/29 00:59:30 | at org.apache.catalina.core.StandardService.start(StandardService.java:516) 2008/04/29 00:59:30 | at org.apache.catalina.core.StandardServer.start(StandardServer.java:710) 2008/04/29 00:59:30 | at org.apache.catalina.startup.Catalina.start(Catalina.java:566) 2008/04/29 00:59:30 | at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) 2008/04/29 00:59:30 | at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) 2008/04/29 00:59:30 | at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) 2008/04/29 00:59:30 | at java.lang.reflect.Method.invoke(Method.java:597) 2008/04/29 00:59:30 | at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:288) 2008/04/29 00:59:30 | at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:413) 2008/04/29 00:59:30 | at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) 2008/04/29 00:59:30 | at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) 2008/04/29 00:59:30 | at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) 2008/04/29 00:59:30 | at java.lang.reflect.Method.invoke(Method.java:597) 2008/04/29 00:59:30 | at org.tanukisoftware.wrapper.WrapperStartStopApp.run(WrapperStartStopApp.java:238) 2008/04/29 00:59:30 | at java.lang.Thread.run(Thread.java:619) 2008/04/29 00:59:30 | Caused by: Connection timed out - [unknown location] 2008/04/29 00:59:30 | at com.opensymphony.xwork2.util.DomHelper.parse(DomHelper.java:123) 2008/04/29 00:59:30 | at com.opensymphony.xwork2.config.providers.XmlConfigurationProvider.loadConfigurationFiles(XmlConfigurationProvider.java:830) 2008/04/29 00:59:30 | ... 31 more 2008/04/29 00:59:30 | Caused by: java.net.ConnectException: Connection timed out 2008/04/29 00:59:30 | at java.net.PlainSocketImpl.socketConnect(Native Method) 2008/04/29 00:59:30 | at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333) 2008/04/29 00:59:30 | at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195) 2008/04/29 00:59:30 | at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182) 2008/04/29 00:59:30 | at java.net.Socket.connect(Socket.java:518) 2008/04/29 00:59:30 | at java.net.Socket.connect(Socket.java:468) 2008/04/29 00:59:30 | at sun.net.NetworkClient.doConnect(NetworkClient.java:157) 2008/04/29 00:59:30 | at
RE: Simplified usage of:@com.company.Constants.StaticCOnstants
Hi, This doesn't seem to be working. My main problem is that why is it not throwing any exceptions if its not the right way to display it? Any other way of fixing this issue??? Ravi -Original Message- From: Chris Pratt [mailto:[EMAIL PROTECTED] Sent: Tuesday, April 29, 2008 10:40 AM To: Struts Users Mailing List Subject: Re: Simplified usage of:@com.company.Constants.StaticCOnstants I think it may need to be: s:set name=C value=@com.company.Constants@ / s:property value=#C.staticconstant / But I haven't tried it myself. (*Chris*) On Mon, Apr 28, 2008 at 9:44 PM, ravi_eze [EMAIL PROTECTED] wrote: hi, i tried this way: s:set name=C value=@com.company.Constants / s:property value=[EMAIL PROTECTED] / but its not working nor it throws an exception if its wrong way of doing. any help? cheers, ravi Wes Wannemacher wrote: http://struts.apache.org/2.x/docs/set.html On Mon, 2008-04-28 at 08:17 -0700, ravi_eze wrote: hi, we want to access the constants in our jsp page. So we are proceeding as follows: s:text field name=[EMAIL PROTECTED]@STATIC_CONSTANTS1] / the problem with this is that we need to repeat the @com.company.Constants always. So is there a simple way to get this working? I wanted to try out S:bean and s:Push... but no luck... please help. cheers, ravi - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] -- View this message in context: http://www.nabble.com/Simplified-usage-of%3A%40com.company.Constants.Sta ticCOnstants-tp16941171p16952906.html Sent from the Struts - User mailing list archive at Nabble.com. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: devMode + Windows + Eclipse + Tomcat = not reloading struts.xml
I'm pretty sure it's an Windows/Eclipse thing as I see the same thing with or without devMode set to true on Windows with JDK 1.5.0_14. Struts has very little control over how it is deployed into the webapp container (tomcat in your case), so you might want to check in with the eclipse guys to see what they say. Al. - Original Message - From: Chase [EMAIL PROTECTED] To: Struts Users Mailing List user@struts.apache.org Sent: Tuesday, April 29, 2008 1:36 AM Subject: Re: devMode + Windows + Eclipse + Tomcat = not reloading struts.xml Adam Hardy wrote: Chase on 28/04/08 22:14, wrote: Anyone had issues with devMode not working fully on Windows? I've got constant name=struts.devMode value=true / set and in my Tomcat console log I'm seeing: INFO: Overriding property struts.configuration.xml.reload - old value: false new value: true Windows XP Sun JDK 1.6u6 Eclipse 3.3.2 Tomcat 6.0.16 Tomcat is being controlled and deployed to by Eclipse. Not fully working? Is it showing any devMode signs? ResourceBundle? struts.xml? Extra logging? Yes, for instance I'm getting the Struts Problem Report page instead of the basic 404 pages. I haven't check ResourceBundles yet. Same project and versions of Struts/Tomcat/Eclipse on a Linux box work with no problem. I'm just not seeing struts.xml reloading on Windows systems. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
