请教各位大侠,启动VROUTE时,出现以下错误。请各位老大看一下。谢谢!
ost id: null host id before state transition: 6 DEBUG [cloud.capacity.CapacityManagerImpl] (Job-Executor-2:job-110) Hosts's actual total CPU: 23940 and CPU after applying overprovisioning: 23940 DEBUG [cloud.capacity.CapacityManagerImpl] (Job-Executor-2:job-110) release cpu from host: 6, old used: 500,reserved: 0, actual total: 23940, total with overprovisioning: 23940; new used: 0,reserved:0; movedfromreserved: false,moveToReserveredfalse DEBUG [cloud.capacity.CapacityManagerImpl] (Job-Executor-2:job-110) release mem from host: 6, old used: 536870912,reserved: 0, total: 21431967744; new used: 0,reserved:0; movedfromreserved: false,moveToReserveredfalse ERROR [cloud.async.AsyncJobManagerImpl] (Job-Executor-2:job-110) Unexpected exception while executing org.apache.cloudstack.api.command.admin.router.StartRouterCmd com.cloud.exception.AgentUnavailableException: Resource [Host:6] is unreachable: Host 6: Unable to start instance due to com.cloud.agent.api.UnsupportedAnswer cannot be cast to com.cloud.agent.api.storage.PrimaryStorageDownloadAnswer at com.cloud.vm.VirtualMachineManagerImpl.advanceStart(VirtualMachineManagerImpl.java:843) at com.cloud.vm.VirtualMachineManagerImpl.start(VirtualMachineManagerImpl.java:472) at com.cloud.network.router.VirtualNetworkApplianceManagerImpl.start(VirtualNetworkApplianceManagerImpl.java:2615) at com.cloud.network.router.VirtualNetworkApplianceManagerImpl.startVirtualRouter(VirtualNetworkApplianceManagerImpl.java:1824) at com.cloud.network.router.VirtualNetworkApplianceManagerImpl.startRouter(VirtualNetworkApplianceManagerImpl.java:2873) at com.cloud.network.router.VirtualNetworkApplianceManagerImpl.startRouter(VirtualNetworkApplianceManagerImpl.java:2823) at com.cloud.utils.component.ComponentInstantiationPostProcessor$InterceptorDispatcher.intercept(ComponentInstantiationPostProcessor.java:125) at org.apache.cloudstack.api.command.admin.router.StartRouterCmd.execute(StartRouterCmd.java:103) at com.cloud.api.ApiDispatcher.dispatch(ApiDispatcher.java:163) at com.cloud.async.AsyncJobManagerImpl$1.run(AsyncJobManagerImpl.java:439) at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:471) at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:334) at java.util.concurrent.FutureTask.run(FutureTask.java:166) at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:603) at java.lang.Thread.run(Thread.java:679) 2014-01-21 toudsf
加载主存储报错
环境:cloudstack4.0.2+KVM+NFSCS:10.6.27.31kvm主机:10.6.31.4 NFS:通过ctdb服务提供,虚拟ip:10.6.27.100export地址:/gluster/data在加入主存储是总是报错:EBUG [agent.transport.Request] (catalina-exec-19:null) Seq 1-523436038: Sending { Cmd , MgmtId: 345052348489, via: 1, Ver: v1, Flags: 100011, [{ModifyStoragePoolCommand:{add:true,pool:{id:200,uuid:5d3a388b-b2ca-3c62-9703-6312647adc48,host:10.6.26.100,path:/gluster/data,port:2049,type:NetworkFilesystem},localPath:/mnt//5d3a388b-b2ca-3c62-9703-6312647adc48,wait:0}}] }2014-01-21 17:09:44,091 DEBUG [agent.transport.Request] (AgentManager-Handler-10:null) Seq 1-523436038: Processing: { Ans: , MgmtId: 345052348489, via: 1, Ver: v1, Flags: 10, [{Answer:{result:false,details:java.lang.NullPointerException\n\tat com.cloud.hypervisor.kvm.storage.LibvirtStorageAdaptor.createStoragePool(LibvirtStorageAdaptor.java:539)\n\tat com.cloud.hypervisor.kvm.storage.KVMStoragePoolManager.createStoragePool(KVMStoragePoolManager.java:57)\n\tat com.cloud.hypervisor.kvm.resource.LibvirtComputingResource.execute(LibvirtComputingResource.java:2087)\n\tat com.cloud.hypervisor.kvm.resource.LibvirtComputingResource.executeRequest(LibvirtComputingResource.java:1053)\n\tat com.cloud.agent.Agent.processRequest(Agent.java:518)\n\tat com.cloud.agent.Agent$AgentRequestHandler.doTask(Agent.java:831)\n\tat com.cloud.utils.nio.Task.run(Task.java:83)\n\tat java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110)\n\tat java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:603)\n\tat java.lang.Thread.run(Thread.java:679)\n,wait:0}}] }2014-01-21 17:09:44,092 DEBUG [agent.transport.Request] (catalina-exec-19:null) Seq 1-523436038: Received: { Ans: , MgmtId: 345052348489, via: 1, Ver: v1, Flags: 10, { Answer } }2014-01-21 17:09:44,092 DEBUG [agent.manager.AgentManagerImpl] (catalina-exec-19:null) Details from executing class com.cloud.agent.api.ModifyStoragePoolCommand: java.lang.NullPointerException at com.cloud.hypervisor.kvm.storage.LibvirtStorageAdaptor.createStoragePool(LibvirtStorageAdaptor.java:539)日志见附件,请不吝赐教。
如何在CS更改VM虚拟网卡的驱动类型,哪个高手知道?
您好: 我现在运行环境是CS 4.1.1 + KVM 做的云平台。现已部署一台 管理服务器,10 台主机,现在需要做优化。 KVM 的研发人员建议,我们创建的VM 中的虚拟网卡的驱动类型采用e1000,而不是采用virio, 请问 如何在CS更改VM虚拟网卡的驱动类型,哪个高手知道? cloudstackfqa2013
Re: New to CloudStack // Questions
Hi! I have been working on adding support for Cloudstack in packer.io. This way it is simple to create either new templates from scratch or update an existing template. For creating the initial template from scratch we have a custom iPXE ISO that will fetch the iPXE-script via userdata, boot kernel+initrd and finally perform a kickstart installation (we use centos). So the no more manual intervention to upload ISOs, select options in installer, stop the VM and finally create the template. Everything is automated. Plan is to upstream this to packer proper or release it as a independent plugin. Currently the code need some cleanup. // peter On Tuesday 21 January 2014 at 06:26, Shanker Balan wrote: On 21-Jan-2014, at 5:10 am, Chad c...@logicweb.com (http://web.com) wrote: Thanks Erik. I've installed O/S on dedicated servers over the years using USB method, easily done as you boot off the USB. I personally use PXE boot to install OS on bare-metal hardware. Running around in cold colos with a USB stick would be fun though. :) But I've never done it on a virtual machine. Can you explain how an o/s installed in a VM that is already created with Centos for example? I've used pre-made templates provided by OpenVZ / KVM communities over the years for traditional non-cloud VPS’. I would not trust pre-made template from 3rd parties for security reasons. YMMV. -- @shankerbalan M: +91 98860 60539 | O: +91 (80) 67935867 shanker.ba...@shapeblue.com | www.shapeblue.com (http://www.shapeblue.com) | Twitter:@shapeblue ShapeBlue Services India LLP, 22nd floor, Unit 2201A, World Trade Centre, Bangalore - 560 055 Need Enterprise Grade Support for Apache CloudStack? Our CloudStack Infrastructure Supporthttp://shapeblue.com/cloudstack-infrastructure-support/ offers the best 24/7 SLA for CloudStack Environments. Apache CloudStack Bootcamp training courses **NEW!** CloudStack 4.2 traininghttp://shapeblue.com/cloudstack-training/ 08/09 January 2014, Londonhttp://shapeblue.com/cloudstack-training/ 13-17 January 2014, GLOBAL. Instructor led, On-linehttp://shapeblue.com/cloudstack-training/ 20-24 January 2014, GLOBAL. Instructor led, On-linehttp://shapeblue.com/cloudstack-training/ This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Shape Blue Ltd or related companies. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. Shape Blue Ltd is a company incorporated in England Wales. ShapeBlue Services India LLP is a company incorporated in India and is operated under license from Shape Blue Ltd. Shape Blue Brasil Consultoria Ltda is a company incorporated in Brasil and is operated under license from Shape Blue Ltd. ShapeBlue is a registered trademark.
Re: New to CloudStack // Questions
On Jan 21, 2014, at 10:01 AM, Peter Jönsson peter.jons...@klarna.com wrote: Hi! I have been working on adding support for Cloudstack in packer.io. This way it is simple to create either new templates from scratch or update an existing template. For creating the initial template from scratch we have a custom iPXE ISO that will fetch the iPXE-script via userdata, boot kernel+initrd and finally perform a kickstart installation (we use centos). So the no more manual intervention to upload ISOs, select options in installer, stop the VM and finally create the template. Everything is automated. Plan is to upstream this to packer proper or release it as a independent plugin. Currently the code need some cleanup. That's terrific Peter, I am trying to wrap my mind around packer these days, so it would be great to see a CloudStack plugin. -sebastien // peter On Tuesday 21 January 2014 at 06:26, Shanker Balan wrote: On 21-Jan-2014, at 5:10 am, Chad c...@logicweb.com (http://web.com) wrote: Thanks Erik. I've installed O/S on dedicated servers over the years using USB method, easily done as you boot off the USB. I personally use PXE boot to install OS on bare-metal hardware. Running around in cold colos with a USB stick would be fun though. :) But I've never done it on a virtual machine. Can you explain how an o/s installed in a VM that is already created with Centos for example? I've used pre-made templates provided by OpenVZ / KVM communities over the years for traditional non-cloud VPS’. I would not trust pre-made template from 3rd parties for security reasons. YMMV. -- @shankerbalan M: +91 98860 60539 | O: +91 (80) 67935867 shanker.ba...@shapeblue.com | www.shapeblue.com (http://www.shapeblue.com) | Twitter:@shapeblue ShapeBlue Services India LLP, 22nd floor, Unit 2201A, World Trade Centre, Bangalore - 560 055 Need Enterprise Grade Support for Apache CloudStack? Our CloudStack Infrastructure Supporthttp://shapeblue.com/cloudstack-infrastructure-support/ offers the best 24/7 SLA for CloudStack Environments. Apache CloudStack Bootcamp training courses **NEW!** CloudStack 4.2 traininghttp://shapeblue.com/cloudstack-training/ 08/09 January 2014, Londonhttp://shapeblue.com/cloudstack-training/ 13-17 January 2014, GLOBAL. Instructor led, On-linehttp://shapeblue.com/cloudstack-training/ 20-24 January 2014, GLOBAL. Instructor led, On-linehttp://shapeblue.com/cloudstack-training/ This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Shape Blue Ltd or related companies. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. Shape Blue Ltd is a company incorporated in England Wales. ShapeBlue Services India LLP is a company incorporated in India and is operated under license from Shape Blue Ltd. Shape Blue Brasil Consultoria Ltda is a company incorporated in Brasil and is operated under license from Shape Blue Ltd. ShapeBlue is a registered trademark.
Re: New to CloudStack // Questions
On Tue, Jan 21, 2014 at 10:29:35AM +0100, sebgoa wrote: On Jan 21, 2014, at 10:01 AM, Peter J?nsson peter.jons...@klarna.com wrote: Hi! I have been working on adding support for Cloudstack in packer.io. This way it is simple to create either new templates from scratch or update an existing template. For creating the initial template from scratch we have a custom iPXE ISO that will fetch the iPXE-script via userdata, boot kernel+initrd and finally perform a kickstart installation (we use centos). So the no more manual intervention to upload ISOs, select options in installer, stop the VM and finally create the template. Everything is automated. Plan is to upstream this to packer proper or release it as a independent plugin. Currently the code need some cleanup. That's terrific Peter, I am trying to wrap my mind around packer these days, so it would be great to see a CloudStack plugin. +1 - looking forward to a packer plugin for cloudstack! If possible, reuse the goclient that is already available to communicate via packer - https://github.com/mindjiver/gopherstack Happy to help with bugfixes etc! -- Prasanna., Powered by BigRock.com
Re: New to CloudStack // Questions
Well, I wrote that library so I’m using it. :) I will try to make that library more agnostic to packer, that the plugin will be in a more releasable state. We are testing a version of packer with cloudstack support internally at work. That moving target is here: https://github.com/mindjiver/packer // peter On Tuesday 21 January 2014 at 10:36, Prasanna Santhanam wrote: On Tue, Jan 21, 2014 at 10:29:35AM +0100, sebgoa wrote: On Jan 21, 2014, at 10:01 AM, Peter J?nsson peter.jons...@klarna.com (mailto:peter.jons...@klarna.com) wrote: Hi! I have been working on adding support for Cloudstack in packer.io (http://packer.io). This way it is simple to create either new templates from scratch or update an existing template. For creating the initial template from scratch we have a custom iPXE ISO that will fetch the iPXE-script via userdata, boot kernel+initrd and finally perform a kickstart installation (we use centos). So the no more manual intervention to upload ISOs, select options in installer, stop the VM and finally create the template. Everything is automated. Plan is to upstream this to packer proper or release it as a independent plugin. Currently the code need some cleanup. That's terrific Peter, I am trying to wrap my mind around packer these days, so it would be great to see a CloudStack plugin. +1 - looking forward to a packer plugin for cloudstack! If possible, reuse the goclient that is already available to communicate via packer - https://github.com/mindjiver/gopherstack Happy to help with bugfixes etc! -- Prasanna., Powered by BigRock.com (http://BigRock.com)
Re: New to CloudStack // Questions
On Tue, Jan 21, 2014 at 10:52:11AM +0100, Peter J??nsson wrote: Well, I wrote that library so I???m using it. :) yup - i know, i started working off a fork of your lib when i started couple months ago. will checkout your fork of packer too. I will try to make that library more agnostic to packer, that the plugin will be in a more releasable state. We are testing a version of packer with cloudstack support internally at work. That moving target is here: https://github.com/mindjiver/packer awesome - i want to be able to reuse some of our images built using packer on a cloudstack cloud since it helps optimize our aws costs. -- Prasanna., Powered by BigRock.com
Re: New to CloudStack // Questions
On 21-Jan-2014, at 3:22 pm, Peter Jönsson peter.jons...@klarna.com wrote: Well, I wrote that library so I’m using it. :) I will try to make that library more agnostic to packer, that the plugin will be in a more releasable state. We are testing a version of packer with cloudstack support internally at work. That moving target is here: https://github.com/mindjiver/packer Brilliant. Looking forward to Packer+cloudstack. Thanks. -- @shankerbalan M: +91 98860 60539 | O: +91 (80) 67935867 shanker.ba...@shapeblue.com | www.shapeblue.com | Twitter:@shapeblue ShapeBlue Services India LLP, 22nd floor, Unit 2201A, World Trade Centre, Bangalore - 560 055 Need Enterprise Grade Support for Apache CloudStack? Our CloudStack Infrastructure Supporthttp://shapeblue.com/cloudstack-infrastructure-support/ offers the best 24/7 SLA for CloudStack Environments. Apache CloudStack Bootcamp training courses **NEW!** CloudStack 4.2 traininghttp://shapeblue.com/cloudstack-training/ 08/09 January 2014, Londonhttp://shapeblue.com/cloudstack-training/ 13-17 January 2014, GLOBAL. Instructor led, On-linehttp://shapeblue.com/cloudstack-training/ 20-24 January 2014, GLOBAL. Instructor led, On-linehttp://shapeblue.com/cloudstack-training/ This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Shape Blue Ltd or related companies. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. Shape Blue Ltd is a company incorporated in England Wales. ShapeBlue Services India LLP is a company incorporated in India and is operated under license from Shape Blue Ltd. Shape Blue Brasil Consultoria Ltda is a company incorporated in Brasil and is operated under license from Shape Blue Ltd. ShapeBlue is a registered trademark.
Re: Translation
On Jan 21, 2014, at 12:14 AM, Hollman Enciso R. hollman.enc...@gmail.com wrote: On Mon, Jan 20, 2014 at 5:48 PM, Erik Weber terbol...@gmail.com wrote: You could do it on transifex :-) https://www.transifex.com/projects/p/CloudStack_UI/ thanks this might help: http://www.youtube.com/watch?v=coVeK1QuIxM -- Hollman Eduardo Enciso R. http://nexxuz.com http://algolibre.com http://www.hollmanenciso.com/ @hollman
management server DB timeout
Hey Guys, just some short question. Is there a way to increase the DB timeout for the management server? I use mha for mysql master / slave automatic failover. Everything works but everytime I perform a master failover and the virtual IP changes, the management server shows me immediately the following: DB communication problem detected, fence it 2014-01-21 14:19:51,502 DEBUG [cloud.cluster.ClusterManagerImpl] (Cluster-Notification-1:null) Notify management server node isolation to listeners 2014-01-21 14:19:51,503 ERROR [cloud.cluster.ClusterFenceManagerImpl] (Cluster-Notification-1:null) Received node isolation notification, will perform self-fencing and shut myself down Can we avoid that self-fencing? I already had a look at db.properties file but I cannot find a timeout value. thx
Re: CloudStack 4.2 Advance networking setup
Comments inline. On 20-Jan-2014, at 9:15 pm, motty cruz motty.c...@gmail.com wrote: Thanks again, I apologize for pushing this further but can I get by without using bonding? What exactly are you trying to get by” here? There are 4 traffic types in CloudStack - management, storage, guest and public. So, if you had four physical network interfaces, your bridging would be as below: eth0 - cloudbr0 - management eth1 - cloudbr1 - storage eth2 - cloudbr2 - guest eth3 - cloudbr3 - public If you had 8 physical interfaces: eth0+eth4 - bond0 - cloudbr0 - management eth1+eth5 - bond1 - cloudbr1 - storage eth2+eth6 - bond2 - cloudbr2 - guest eth3+eth7 - bond3 - cloudbr3 - public And if you had 12 interfaces: eth0+eth4+eth8 - bond0 - cloudbr0 - management eth1+eth5+eth9 - bond1 - cloudbr1 - storage eth2+eth6+eth10 - bond2 - cloudbr2 - guest eth3+eth7+eth11 - bond3 - cloudbr3 - public If you dont want to do bonding and had 3 NICs, then: eth0 - cloudbr0 - management eth1 - cloudbr1 - guest eth2 - cloudbr2 - public Next, if you had only 2 physical network interfaces, then... eth0 - cloudbr0 - management eth1 - cloudbr1 - guest+public Finally, if you had only ONE physical interface... eth0 - cloudbr0 - management+guest+public There is no bonding involved anywhere. Bonding is required only if you require to double your bandwidth requirements and/or build in fault tolerance (LAGG/LACP). at this moment I have two bridges management(cloudbr1) and public/guest(cloudbr0) in CS when I try to create a network under Network Offering is blank and am unable to select anything. AFAIK, creating a new network offering via ‘Service Offering - Network Offerings - Add network offering’ is unrelated to your physical networking setup. any idea? Bug in ACS maybe? Someone from the dev team might know more (or open a Jira ticket for the same). Also, you can always use the API to create network offerings. On Mon, Jan 20, 2014 at 7:33 AM, Shanker Balan shanker.ba...@shapeblue.comwrote: Yeesh, wonder how steps (1) and (2) got deleted. Adding them now. :D On 20-Jan-2014, at 8:50 pm, Shanker Balan shanker.ba...@shapeblue.com wrote: Comments inline. On 20-Jan-2014, at 8:27 pm, motty cruz motty.c...@gmail.com wrote: Thanks for your support, I would like to create two public subnets, both facing public without routers involved. my questions was how to configure bridge for three interfaces, is it same bridge, am a bit confuse. The actual steps: (1) Map ethernet interfaces to bond0 (2) Map bond0 to bridge interface cloudbr0 (or cloudbr1 depending on your environment) Any decent Linux bridging HOWTo would help you do steps (1) and (2), there is nothing cloudstack specific about creating bonds+bridge. Just make sure your bridge interface has a prefix of cloudbr Alternatively, http://shankerbalan.net/blog/network-bonding-with-cloudstack-and-linux-kvm/ could also be helpful. [root@kvm1 network-scripts]# less ifcfg-eth0 DEVICE=eth0 HWADDR=00:25:90:CA:70:66 TYPE=Ethernet ONBOOT=yes BRIDGE=cloudbr0 [root@kvm1 network-scripts]# less ifcfg-eth2 DEVICE=eth2 TYPE=Ethernet HWADD=90:E2:BA:54:DF:9A ONBOOT=yes BRIDGE=cloudbr0 [root@kvm1 network-scripts]# less ifcfg-eth3 DEVICE=eth3 HWADDR=90:E2:BA:54:DF:9B TYPE=Ethernet ONBOOT=yes BRIDGE=cloudbr0 The above configs wont create bonds. Please see https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise_Linux/6/html/Deployment_Guide/sec-Using_Channel_Bonding.html -- @shankerbalan M: +91 98860 60539 | O: +91 (80) 67935867 shanker.ba...@shapeblue.com | www.shapeblue.com | Twitter:@shapeblue ShapeBlue Services India LLP, 22nd floor, Unit 2201A, World Trade Centre, Bangalore - 560 055 Need Enterprise Grade Support for Apache CloudStack? Our CloudStack Infrastructure Support http://shapeblue.com/cloudstack-infrastructure-support/ offers the best 24/7 SLA for CloudStack Environments. Apache CloudStack Bootcamp training courses **NEW!** CloudStack 4.2 training http://shapeblue.com/cloudstack-training/ 08/09 January 2014, Londonhttp://shapeblue.com/cloudstack-training/ 13-17 January 2014, GLOBAL. Instructor led, On-line http://shapeblue.com/cloudstack-training/ 20-24 January 2014, GLOBAL. Instructor led, On-line http://shapeblue.com/cloudstack-training/ This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Shape Blue Ltd or related companies. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. Shape Blue Ltd is a company incorporated in England Wales. ShapeBlue Services India LLP is a company incorporated in India and is operated under
Re: management server DB timeout
Hi, I have this problem with my failover setup, I think however it's by design to ensure data consistency and is more that the MySQL connections have disappeared instead of it timing out. I ended up creating a cron watchdog to start CS Management incase it stopped, I'm sure there are more elegant solutions however, maybe using upstart. If you wish I can paste it here. Marty On Tuesday, January 21, 2014, Abu Bashiri abu.bashiri...@gmail.com wrote: Hey Guys, just some short question. Is there a way to increase the DB timeout for the management server? I use mha for mysql master / slave automatic failover. Everything works but everytime I perform a master failover and the virtual IP changes, the management server shows me immediately the following: DB communication problem detected, fence it 2014-01-21 14:19:51,502 DEBUG [cloud.cluster.ClusterManagerImpl] (Cluster-Notification-1:null) Notify management server node isolation to listeners 2014-01-21 14:19:51,503 ERROR [cloud.cluster.ClusterFenceManagerImpl] (Cluster-Notification-1:null) Received node isolation notification, will perform self-fencing and shut myself down Can we avoid that self-fencing? I already had a look at db.properties file but I cannot find a timeout value. thx
Re: CloudStack 4.2 Advance networking setup
Thank you, it clear out the confusing in my mind. On Tue, Jan 21, 2014 at 6:50 AM, Shanker Balan shanker.ba...@shapeblue.comwrote: Comments inline. On 20-Jan-2014, at 9:15 pm, motty cruz motty.c...@gmail.com wrote: Thanks again, I apologize for pushing this further but can I get by without using bonding? What exactly are you trying to get by” here? There are 4 traffic types in CloudStack - management, storage, guest and public. So, if you had four physical network interfaces, your bridging would be as below: eth0 - cloudbr0 - management eth1 - cloudbr1 - storage eth2 - cloudbr2 - guest eth3 - cloudbr3 - public If you had 8 physical interfaces: eth0+eth4 - bond0 - cloudbr0 - management eth1+eth5 - bond1 - cloudbr1 - storage eth2+eth6 - bond2 - cloudbr2 - guest eth3+eth7 - bond3 - cloudbr3 - public And if you had 12 interfaces: eth0+eth4+eth8 - bond0 - cloudbr0 - management eth1+eth5+eth9 - bond1 - cloudbr1 - storage eth2+eth6+eth10 - bond2 - cloudbr2 - guest eth3+eth7+eth11 - bond3 - cloudbr3 - public If you dont want to do bonding and had 3 NICs, then: eth0 - cloudbr0 - management eth1 - cloudbr1 - guest eth2 - cloudbr2 - public Next, if you had only 2 physical network interfaces, then... eth0 - cloudbr0 - management eth1 - cloudbr1 - guest+public Finally, if you had only ONE physical interface... eth0 - cloudbr0 - management+guest+public There is no bonding involved anywhere. Bonding is required only if you require to double your bandwidth requirements and/or build in fault tolerance (LAGG/LACP). at this moment I have two bridges management(cloudbr1) and public/guest(cloudbr0) in CS when I try to create a network under Network Offering is blank and am unable to select anything. AFAIK, creating a new network offering via ‘Service Offering - Network Offerings - Add network offering’ is unrelated to your physical networking setup. any idea? Bug in ACS maybe? Someone from the dev team might know more (or open a Jira ticket for the same). Also, you can always use the API to create network offerings. On Mon, Jan 20, 2014 at 7:33 AM, Shanker Balan shanker.ba...@shapeblue.comwrote: Yeesh, wonder how steps (1) and (2) got deleted. Adding them now. :D On 20-Jan-2014, at 8:50 pm, Shanker Balan shanker.ba...@shapeblue.com wrote: Comments inline. On 20-Jan-2014, at 8:27 pm, motty cruz motty.c...@gmail.com wrote: Thanks for your support, I would like to create two public subnets, both facing public without routers involved. my questions was how to configure bridge for three interfaces, is it same bridge, am a bit confuse. The actual steps: (1) Map ethernet interfaces to bond0 (2) Map bond0 to bridge interface cloudbr0 (or cloudbr1 depending on your environment) Any decent Linux bridging HOWTo would help you do steps (1) and (2), there is nothing cloudstack specific about creating bonds+bridge. Just make sure your bridge interface has a prefix of cloudbr Alternatively, http://shankerbalan.net/blog/network-bonding-with-cloudstack-and-linux-kvm/ could also be helpful. [root@kvm1 network-scripts]# less ifcfg-eth0 DEVICE=eth0 HWADDR=00:25:90:CA:70:66 TYPE=Ethernet ONBOOT=yes BRIDGE=cloudbr0 [root@kvm1 network-scripts]# less ifcfg-eth2 DEVICE=eth2 TYPE=Ethernet HWADD=90:E2:BA:54:DF:9A ONBOOT=yes BRIDGE=cloudbr0 [root@kvm1 network-scripts]# less ifcfg-eth3 DEVICE=eth3 HWADDR=90:E2:BA:54:DF:9B TYPE=Ethernet ONBOOT=yes BRIDGE=cloudbr0 The above configs wont create bonds. Please see https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise_Linux/6/html/Deployment_Guide/sec-Using_Channel_Bonding.html -- @shankerbalan M: +91 98860 60539 | O: +91 (80) 67935867 shanker.ba...@shapeblue.com | www.shapeblue.com | Twitter:@shapeblue ShapeBlue Services India LLP, 22nd floor, Unit 2201A, World Trade Centre, Bangalore - 560 055 Need Enterprise Grade Support for Apache CloudStack? Our CloudStack Infrastructure Support http://shapeblue.com/cloudstack-infrastructure-support/ offers the best 24/7 SLA for CloudStack Environments. Apache CloudStack Bootcamp training courses **NEW!** CloudStack 4.2 training http://shapeblue.com/cloudstack-training/ 08/09 January 2014, Londonhttp://shapeblue.com/cloudstack-training/ 13-17 January 2014, GLOBAL. Instructor led, On-line http://shapeblue.com/cloudstack-training/ 20-24 January 2014, GLOBAL. Instructor led, On-line http://shapeblue.com/cloudstack-training/ This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Shape Blue Ltd or related companies. If you are not the intended recipient of this email, you must neither take any action based
instance naming in a vmware 5.1 cloudstack 4.2.1 setup
Hi we just tested the upgrade from 3.0.7 to 4.2.1 in our test environment While the upgrade went smooth we see a big issue with vm naming in vmware. With cs 3.0.7 vm's where named like this: i-id-number-user_entered_vm_name (with global setting of vm.instancename.flag = true) After the update, vm's are just named as follow: user_entered_vm_name No i-id-number- anymore in vSphere. Global setting is unchanged. This leads to issues when two different customers try to create a vm with the same name! while cloudstack creates the instance in the db, vspeher will not create a vm with the same name as an already existing vm. This naming is also different from the descriptions in the docs. Do others see this issue too? Or might it be related to our installation? Best regards Andi
AW: management server DB timeout
Hey Marty, thx for your reply. I mean, in general the self-fence make sense but i was looking for a way to say try to reconnect for 60seconds. Would be cool if you can paste your solution here! Thx -Ursprüngliche Nachricht- Von: Marty Sweet [mailto:msweet@gmail.com] Gesendet: Dienstag, 21. Januar 2014 15:54 An: users@cloudstack.apache.org Betreff: Re: management server DB timeout Hi, I have this problem with my failover setup, I think however it's by design to ensure data consistency and is more that the MySQL connections have disappeared instead of it timing out. I ended up creating a cron watchdog to start CS Management incase it stopped, I'm sure there are more elegant solutions however, maybe using upstart. If you wish I can paste it here. Marty On Tuesday, January 21, 2014, Abu Bashiri abu.bashiri...@gmail.com wrote: Hey Guys, just some short question. Is there a way to increase the DB timeout for the management server? I use mha for mysql master / slave automatic failover. Everything works but everytime I perform a master failover and the virtual IP changes, the management server shows me immediately the following: DB communication problem detected, fence it 2014-01-21 14:19:51,502 DEBUG [cloud.cluster.ClusterManagerImpl] (Cluster-Notification-1:null) Notify management server node isolation to listeners 2014-01-21 14:19:51,503 ERROR [cloud.cluster.ClusterFenceManagerImpl] (Cluster-Notification-1:null) Received node isolation notification, will perform self-fencing and shut myself down Can we avoid that self-fencing? I already had a look at db.properties file but I cannot find a timeout value. thx
Re: management server DB timeout
Hi, From the managment server point of view (as I see it), it would have to stop all communication to Agents and the like if it wished to do that, as the data would become inconsistent with other Management Servers. I would imagine this is too much work to implement, but I'm sure one of the development guys will provide a better insight. I currently implement the following work around: ___ Root Crontab ___ * * * * * /srv/csmanagement-watchdog ___ /srv/csmanagement-watchdog ___ #!/bin/bash # If Cloudstack Management is not running, start it if [ ! -e /var/run/cloudstack-management.pid ]; then service cloudstack-management start fi Hope this helps, Marty On Tue, Jan 21, 2014 at 4:03 PM, Abu Bashiri abu.bashiri...@gmail.comwrote: Hey Marty, thx for your reply. I mean, in general the self-fence make sense but i was looking for a way to say try to reconnect for 60seconds. Would be cool if you can paste your solution here! Thx -Ursprüngliche Nachricht- Von: Marty Sweet [mailto:msweet@gmail.com] Gesendet: Dienstag, 21. Januar 2014 15:54 An: users@cloudstack.apache.org Betreff: Re: management server DB timeout Hi, I have this problem with my failover setup, I think however it's by design to ensure data consistency and is more that the MySQL connections have disappeared instead of it timing out. I ended up creating a cron watchdog to start CS Management incase it stopped, I'm sure there are more elegant solutions however, maybe using upstart. If you wish I can paste it here. Marty On Tuesday, January 21, 2014, Abu Bashiri abu.bashiri...@gmail.com wrote: Hey Guys, just some short question. Is there a way to increase the DB timeout for the management server? I use mha for mysql master / slave automatic failover. Everything works but everytime I perform a master failover and the virtual IP changes, the management server shows me immediately the following: DB communication problem detected, fence it 2014-01-21 14:19:51,502 DEBUG [cloud.cluster.ClusterManagerImpl] (Cluster-Notification-1:null) Notify management server node isolation to listeners 2014-01-21 14:19:51,503 ERROR [cloud.cluster.ClusterFenceManagerImpl] (Cluster-Notification-1:null) Received node isolation notification, will perform self-fencing and shut myself down Can we avoid that self-fencing? I already had a look at db.properties file but I cannot find a timeout value. thx
Re: CloudStack 4.2 Advance networking setup
On 21-Jan-2014, at 8:35 pm, motty cruz motty.c...@gmail.com wrote: Thank you, it clear out the confusing in my mind. :) -- @shankerbalan M: +91 98860 60539 | O: +91 (80) 67935867 shanker.ba...@shapeblue.com | www.shapeblue.com | Twitter:@shapeblue ShapeBlue Services India LLP, 22nd floor, Unit 2201A, World Trade Centre, Bangalore - 560 055 Need Enterprise Grade Support for Apache CloudStack? Our CloudStack Infrastructure Supporthttp://shapeblue.com/cloudstack-infrastructure-support/ offers the best 24/7 SLA for CloudStack Environments. Apache CloudStack Bootcamp training courses **NEW!** CloudStack 4.2 traininghttp://shapeblue.com/cloudstack-training/ 08/09 January 2014, Londonhttp://shapeblue.com/cloudstack-training/ 13-17 January 2014, GLOBAL. Instructor led, On-linehttp://shapeblue.com/cloudstack-training/ 20-24 January 2014, GLOBAL. Instructor led, On-linehttp://shapeblue.com/cloudstack-training/ This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Shape Blue Ltd or related companies. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. Shape Blue Ltd is a company incorporated in England Wales. ShapeBlue Services India LLP is a company incorporated in India and is operated under license from Shape Blue Ltd. Shape Blue Brasil Consultoria Ltda is a company incorporated in Brasil and is operated under license from Shape Blue Ltd. ShapeBlue is a registered trademark.
4.2.1 storage motion of Instance
We recently upgrade or Cloudstack from 4.1.0 to 4.2.1. hypervisor not upgraded and using xenserver 6.0.2 Since then, we are unable to storage xenmotion Instance from a Primary Storage to another. The pool is using local and shared storage and all kind of storage xenmotion fail. moving Instances end up with following error message in cloudstack webui: Failed to migration: com.cloud.exception.StorageUnavailableException: Resource [StoragePool:233] is unreachable: migrate volume failed: com.cloud.utils.exception.CloudRuntimeException: DB Exception on: com.mysql.jdbc.JDBC4PreparedStatement@308d011c: SELECT volume_store_ref.id, volume_store_ref.store_id, volume_store_ref.volume_id, volume_store_ref.zone_id, volume_store_ref.created, volume_store_ref.last_updated, volume_store_ref.download_pct, volume_store_ref.size, volume_store_ref.physical_size, volume_store_ref.download_state, volume_store_ref.checksum, volume_store_ref.local_path, volume_store_ref.error_str, volume_store_ref.job_id, volume_store_ref.install_path, volume_store_ref.url, volume_store_ref.download_url, volume_store_ref.download_url_created, volume_store_ref.destroyed, volume_store_ref.update_count, volume_store_ref.updated, volume_store_ref.state, volume_store_ref.ref_cnt FROM volume_store_ref WHERE volume_store_ref.store_id = 60 AND volume_store_ref.volume_id = 1664 AND volume_store_ref.destroyed = 0 ORDER BY RAND() LIMIT 1 if I look in the database the Query provide the following output: mysql SELECT volume_store_ref.id, volume_store_ref.store_id, volume_store_ref.volume_id, volume_store_ref.zone_id, volume_store_ref.created, volume_store_ref.last_updated, volume_store_ref.download_pct, volume_store_ref.size, volume_store_ref.physical_size, volume_store_ref.download_state, volume_store_ref.checksum, volume_store_ref.local_path, volume_store_ref.error_str, volume_store_ref.job_id, volume_store_ref.install_path, volume_store_ref.url, volume_store_ref.download_url, volume_store_ref.download_url_created, volume_store_ref.destroyed, volume_store_ref.update_count, volume_store_ref.updated, volume_store_ref.state, volume_store_ref.ref_cnt FROM volume_store_ref WHERE volume_store_ref.store_id = 60 AND volume_store_ref.volume_id = 1664 AND volume_store_ref.destroyed = 0 ORDER BY RAND() LIMIT 1 ; ++--+---+-+-+--+--+--+---++--++---++-+--+--+--+---+--+-+--+-+ | id | store_id | volume_id | zone_id | created | last_updated | download_pct | size | physical_size | download_state | checksum | local_path | error_str | job_id | install_path| url | download_url | download_url_created | destroyed | update_count | updated | state| ref_cnt | ++--+---+-+-+--+--+--+---++--++---++-+--+--+--+---+--+-+--+-+ | 23 | 60 | 1664 | 0 | 2014-01-21 18:08:25 | NULL |0 |0 | 0 | NULL | NULL | NULL | NULL | NULL | volumes/11/1664 | NULL | NULL | NULL | 0 |1 | 2014-01-21 18:08:25 | Creating | 0 | ++--+---+-+-+--+--+--+---++--++---++-+--+--+--+---+--+-+--+-+ 1 row in set (0.00 sec) Is this a bug from 4.2.1 ? Pierre-Luc Dion Architecte de Solution Cloud | Cloud Solutions Architect 514-447-3456, 1101 - - - *CloudOps*420 rue Guy Montréal QC H3J 1S6 www.cloudops.com @CloudOps_
CS 4.2 KVM Centos 6.5 FreeBSD 64bit unable to install instance
Hello, I'm trying to install FreeBSD 64bit 9.2 on guest instance on CloudStack 4.2. I was able to successfully download the iso. Instance gets created boots from ISO but then it freezes. I was able to successfully install default CentOS template, but not instances other than the default CentOS, can someone help? Thanks,
Re: CS 4.2 KVM Centos 6.5 FreeBSD 64bit unable to install instance
On 21.01.2014 22:11, motty cruz wrote: Hello, I'm trying to install FreeBSD 64bit 9.2 on guest instance on CloudStack 4.2. I was able to successfully download the iso. Instance gets created boots from ISO but then it freezes. I was able to successfully install default CentOS template, but not instances other than the default CentOS, can someone help? Thanks, Try to use the FreeBSD 10 ISO with Other PV profile. I just did this the other day and it worked great. Lucian -- Sent from the Delta quadrant using Borg technology! Nux! www.nux.ro
Re: CS 4.2 KVM Centos 6.5 FreeBSD 64bit unable to install instance
Thank you Lucian, but I tried FreeBSD 9.2 64bit and FreeBSD 10 64bit, either ISO did not worked for me. thanks, On Tue, Jan 21, 2014 at 2:14 PM, Nux! n...@li.nux.ro wrote: On 21.01.2014 22:11, motty cruz wrote: Hello, I'm trying to install FreeBSD 64bit 9.2 on guest instance on CloudStack 4.2. I was able to successfully download the iso. Instance gets created boots from ISO but then it freezes. I was able to successfully install default CentOS template, but not instances other than the default CentOS, can someone help? Thanks, Try to use the FreeBSD 10 ISO with Other PV profile. I just did this the other day and it worked great. Lucian -- Sent from the Delta quadrant using Borg technology! Nux! www.nux.ro
Re: CS 4.2 KVM Centos 6.5 FreeBSD 64bit unable to install instance
Comments inline. On 22-Jan-2014, at 3:48 am, motty cruz motty.c...@gmail.com wrote: Thank you Lucian, but I tried FreeBSD 9.2 64bit and FreeBSD 10 64bit, either ISO did not worked for me. I will try FreeBSD 10 + KVM later today and let you know. I can confirm that FreeBSD 10 works wonderfully well on XenServer 6.2 with Os Type as “other” (Thanks to Citrix/Roger) http://blog.xen.org/index.php/2014/01/21/improved-xen-support-in-freebsd/ -- @shankerbalan M: +91 98860 60539 | O: +91 (80) 67935867 shanker.ba...@shapeblue.com | www.shapeblue.com | Twitter:@shapeblue ShapeBlue Services India LLP, 22nd floor, Unit 2201A, World Trade Centre, Bangalore - 560 055 Need Enterprise Grade Support for Apache CloudStack? Our CloudStack Infrastructure Supporthttp://shapeblue.com/cloudstack-infrastructure-support/ offers the best 24/7 SLA for CloudStack Environments. Apache CloudStack Bootcamp training courses **NEW!** CloudStack 4.2 traininghttp://shapeblue.com/cloudstack-training/ 08/09 January 2014, Londonhttp://shapeblue.com/cloudstack-training/ 13-17 January 2014, GLOBAL. Instructor led, On-linehttp://shapeblue.com/cloudstack-training/ 20-24 January 2014, GLOBAL. Instructor led, On-linehttp://shapeblue.com/cloudstack-training/ This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Shape Blue Ltd or related companies. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. Shape Blue Ltd is a company incorporated in England Wales. ShapeBlue Services India LLP is a company incorporated in India and is operated under license from Shape Blue Ltd. Shape Blue Brasil Consultoria Ltda is a company incorporated in Brasil and is operated under license from Shape Blue Ltd. ShapeBlue is a registered trademark.
Re: DHCP entry fails to apply on the latest master
+users When ever we see the error 'Unable to contact resource', I suggest to check the host agent logs (for xen /var/log/SMlog). It will give you idea of what is going wrong from the router. Most of times there could be script execution failures. Adding command to clean up tags on xenserver xe host-param-clear param-name=tags uuid=[uuid] -Jayapal On 22-Jan-2014, at 12:49 AM, Alena Prokharchyk alena.prokharc...@citrix.com wrote: To fix it, you should cleanup the tags on your xen host, so the MS will copy the newest ISO there. Sheng, thank you for helping to debug it. -Alena. On 1/21/14, 11:09 AM, Nitin Mehta nitin.me...@citrix.com wrote: I also face this issue. Here is the snippet of logs. Please let me know if you need any other info. 2014-01-21 10:52:46,909 INFO [c.c.v.VirtualMachineManagerImpl] (Job-Executor-1:ctx-57a7ba8c ctx-933fbba1) Unable to contact resource. com.cloud.exception.ResourceUnavailableException: Resource [DataCenter:1] is unreachable: Unable to apply dhcp entry on router at com.cloud.network.router.VirtualNetworkApplianceManagerImpl.applyRules(Vir t ualNetworkApplianceManagerImpl.java:3826) at com.cloud.network.router.VirtualNetworkApplianceManagerImpl.applyDhcpEntry ( VirtualNetworkApplianceManagerImpl.java:2956) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java: 3 9) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorIm p l.java:25) at java.lang.reflect.Method.invoke(Method.java:597) On 21/01/14 11:01 AM, Alena Prokharchyk alena.prokharc...@citrix.com wrote: I¹ve deployed the latest master code, re-deployed the DB and uploaded new system templates with 4.3 version. After that, UserVm fails to start because DHCP entry fails to apply on the VR. Its a xen host deployment, and I¹ve tested that ssh to the VR works just fine. Sheng, can you please take a look? It happened on a couple of setups. -Alena.
RE: CS 4.2 KVM Centos 6.5 FreeBSD 64bit unable to install instance
Also make sure that the compute offering you use for deploying a vm has sufficient RAM and CPU to boot. -Original Message- From: motty cruz [mailto:motty.c...@gmail.com] Sent: Wednesday, January 22, 2014 3:42 AM To: users@cloudstack.apache.org Subject: CS 4.2 KVM Centos 6.5 FreeBSD 64bit unable to install instance Hello, I'm trying to install FreeBSD 64bit 9.2 on guest instance on CloudStack 4.2. I was able to successfully download the iso. Instance gets created boots from ISO but then it freezes. I was able to successfully install default CentOS template, but not instances other than the default CentOS, can someone help? Thanks,
RE: 4.2.1 storage motion of Instance
This looks like a bug in 4.2.1. Can you elaborate more on the operation tried? Were you trying to migrate a volume (data disk) that was detached from a instance/vm to another storage pool? Regards, Devdeep -Original Message- From: Pierre-Luc Dion [mailto:pd...@cloudops.com] Sent: Wednesday, January 22, 2014 12:28 AM To: users@cloudstack.apache.org Subject: 4.2.1 storage motion of Instance We recently upgrade or Cloudstack from 4.1.0 to 4.2.1. hypervisor not upgraded and using xenserver 6.0.2 Since then, we are unable to storage xenmotion Instance from a Primary Storage to another. The pool is using local and shared storage and all kind of storage xenmotion fail. moving Instances end up with following error message in cloudstack webui: Failed to migration: com.cloud.exception.StorageUnavailableException: Resource [StoragePool:233] is unreachable: migrate volume failed: com.cloud.utils.exception.CloudRuntimeException: DB Exception on: com.mysql.jdbc.JDBC4PreparedStatement@308d011c: SELECT volume_store_ref.id, volume_store_ref.store_id, volume_store_ref.volume_id, volume_store_ref.zone_id, volume_store_ref.created, volume_store_ref.last_updated, volume_store_ref.download_pct, volume_store_ref.size, volume_store_ref.physical_size, volume_store_ref.download_state, volume_store_ref.checksum, volume_store_ref.local_path, volume_store_ref.error_str, volume_store_ref.job_id, volume_store_ref.install_path, volume_store_ref.url, volume_store_ref.download_url, volume_store_ref.download_url_created, volume_store_ref.destroyed, volume_store_ref.update_count, volume_store_ref.updated, volume_store_ref.state, volume_store_ref.ref_cnt FROM volume_store_ref WHERE volume_store_ref.store_id = 60 AND volume_store_ref.volume_id = 1664 AND volume_store_ref.destroyed = 0 ORDER BY RAND() LIMIT 1 if I look in the database the Query provide the following output: mysql SELECT volume_store_ref.id, volume_store_ref.store_id, volume_store_ref.volume_id, volume_store_ref.zone_id, volume_store_ref.created, volume_store_ref.last_updated, volume_store_ref.download_pct, volume_store_ref.size, volume_store_ref.physical_size, volume_store_ref.download_state, volume_store_ref.checksum, volume_store_ref.local_path, volume_store_ref.error_str, volume_store_ref.job_id, volume_store_ref.install_path, volume_store_ref.url, volume_store_ref.download_url, volume_store_ref.download_url_created, volume_store_ref.destroyed, volume_store_ref.update_count, volume_store_ref.updated, volume_store_ref.state, volume_store_ref.ref_cnt FROM volume_store_ref WHERE volume_store_ref.store_id = 60 AND volume_store_ref.volume_id = 1664 AND volume_store_ref.destroyed = 0 ORDER BY RAND() LIMIT 1 ; ++--+---+-+-+--+--+--+---++--++---++-+--+--+--+---+--+-+--+-+ | id | store_id | volume_id | zone_id | created | last_updated | download_pct | size | physical_size | download_state | checksum | local_path | error_str | job_id | install_path| url | download_url | download_url_created | destroyed | update_count | updated | state| ref_cnt | ++--+---+-+-+--+--+--+---++--++---++-+--+--+--+---+--+-+--+-+ | 23 | 60 | 1664 | 0 | 2014-01-21 18:08:25 | NULL |0 |0 | 0 | NULL | NULL | NULL | NULL | NULL | volumes/11/1664 | NULL | NULL | NULL | 0 |1 | 2014-01-21 18:08:25 | Creating | 0 | ++--+---+-+-+--+--+--+---++--++---++-+--+--+--+---+--+-+--+-+ 1 row in set (0.00 sec) Is this a bug from 4.2.1 ? Pierre-Luc Dion Architecte de Solution Cloud | Cloud Solutions Architect 514-447-3456, 1101 - - - *CloudOps*420 rue Guy Montréal QC H3J 1S6 www.cloudops.com @CloudOps_