Re: Generic status Error!!!!!! please help

[Nathan Ferris]

Hi Gerardo,

Have you tried resetting the modem by sending it:
AT+WOPEN=0
... followed by...
AT+WOPEN=1?

Nathan

Gerardo Segura wrote:
Unfortunately this is not a solution. I own a multitech modem, it was 
working ok but one  given day it simply started to give that same 
generic error when trying to send sms.


As in your case the SIM chip works ok if used with a cell phone, but 
not in the modem, neither any another SIM chip.


Nothing seems to be wrong with the modem, except AT+CREG command 
reports status 5  (registered, roaming) instead of 1 (registered, home 
network) despite the fact the device is inside coverage area, even 
more, AT+COPS? shows the correct PLMN. Which means the modem is 
registered in the correct network and yet shows roaming status.


Every other function of the modem works ok, but  now I have little use 
for that device.

I gave up.


regards,
Gerardo

SELVAMANI GANDHIMATHI wrote:

yes, i am able to send and receive sms over a regular phone
i'll try to enable verbose repots as you told and let u know about 
the result..


Thanks,
mathi.

On Mon, Mar 31, 2008 at 4:23 PM, Alvaro Cornejo 
<[EMAIL PROTECTED] > wrote:


can you send/receive sms with those sims on a regular phone?? also
try to enable verbose repots from your modem. try AT+CMEE=1 or 2
in your config fiel under init-string


 On Mon, Mar 31, 2008 at 3:37 AM, SELVAMANI GANDHIMATHI
<[EMAIL PROTECTED] > wrote:

Hi all,

I installed kannel and used a GSM modem and my BSNL sim with
which i could send and receive sms using kannel..
but when i tried to change the SIM to HUTCH or AIRTEL service
provider i am getting the following error.

2008-03-31 14:35:07 [22072] [7] DEBUG: boxc_receiver: sms 
received

2008-03-31 14:35:07 [22072] [7] DEBUG: send_msg: sending msg
to box: <127.0.0.1 >
2008-03-31 14:35:08 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]:
TP-Validity-Period: 24.0 hours
2008-03-31 14:35:08 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: -->
AT+CMGS=24^M
2008-03-31 14:35:08 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <-- >
2008-03-31 14:35:08 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: send
command status: 1
2008-03-31 14:35:08 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: -->
0011000C81194944757277A70BE8329BFD06DDDF723619
2008-03-31 14:35:08 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: --> ^Z
2008-03-31 14:35:10 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <-- >
2008-03-31 14:35:10 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <--
ERROR
2008-03-31 14:35:10 [22072] [4] ERROR: AT2[/dev/ttyUSB0]:
Generic error: ERROR
2008-03-31 14:35:10 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: send
command status: -1
2008-03-31 14:35:10 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: -->
AT+CMGS=24^M
2008-03-31 14:35:10 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <-- >
2008-03-31 14:35:10 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: send
command status: 1
2008-03-31 14:35:10 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: -->
0011000C81194944757277A70BE8329BFD06DDDF723619
2008-03-31 14:35:10 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: --> ^Z
2008-03-31 14:35:12 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <-- >
2008-03-31 14:35:12 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <--
ERROR
2008-03-31 14:35:12 [22072] [4] ERROR: AT2[/dev/ttyUSB0]:
Generic error: ERROR
2008-03-31 14:35:12 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: send
command status: -1
2008-03-31 14:35:12 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: -->
AT+CMGS=24^M
2008-03-31 14:35:12 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <-- >
2008-03-31 14:35:12 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: send
command status: 1
2008-03-31 14:35:12 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: -->
0011000C81194944757277A70BE8329BFD06DDDF723619
2008-03-31 14:35:12 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: --> ^Z
2008-03-31 14:35:15 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <-- >
2008-03-31 14:35:15 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <--
ERROR
2008-03-31 14:35:15 [22072] [4] ERROR: AT2[/dev/ttyUSB0]:
Generic error: ERROR
2008-03-31 14:35:15 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: send
command status: -1

I am uisng debian Linux OS...

Please help

Thanks and Regards,
mathi.




-- 
|-| 


Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde
cualquier celular y
Nextel en México y en mas de 180 paises. Use aplicaciones 2 vias
via SMS y GPRS online
Visitenos en www.smsglobal.com.mx  y
 

MMS blogging

[Tharanga]

Hi all,

I there any providers in UK supports MMS blogging. basically what i need to
do is a users mms will go to providers MMSC and from their direct HTTP
connection to my application


user---> MMS/gateway (provider) --->My application


other scenario
 MM4
USER--> MMSC (provider) --> MMSC (Mbuni)--->My application.


any ideas suggestions are really appriciated


Tharanga

Re: Generic status Error!!!!!! please help

[Gerardo Segura]

Unfortunately this is not a solution. I own a multitech modem, it was 
working ok but one  given day it simply started to give that same 
generic error when trying to send sms.


As in your case the SIM chip works ok if used with a cell phone, but not 
in the modem, neither any another SIM chip.


Nothing seems to be wrong with the modem, except AT+CREG command reports 
status 5  (registered, roaming) instead of 1 (registered, home network) 
despite the fact the device is inside coverage area, even more, AT+COPS? 
shows the correct PLMN. Which means the modem is registered in the 
correct network and yet shows roaming status.


Every other function of the modem works ok, but  now I have little use 
for that device.

I gave up.


regards,
Gerardo

SELVAMANI GANDHIMATHI wrote:

yes, i am able to send and receive sms over a regular phone
i'll try to enable verbose repots as you told and let u know about the 
result..


Thanks,
mathi.

On Mon, Mar 31, 2008 at 4:23 PM, Alvaro Cornejo 
<[EMAIL PROTECTED] > wrote:


can you send/receive sms with those sims on a regular phone?? also
try to enable verbose repots from your modem. try AT+CMEE=1 or 2
in your config fiel under init-string


 
On Mon, Mar 31, 2008 at 3:37 AM, SELVAMANI GANDHIMATHI

<[EMAIL PROTECTED] > wrote:

Hi all,

I installed kannel and used a GSM modem and my BSNL sim with
which i could send and receive sms using kannel..
but when i tried to change the SIM to HUTCH or AIRTEL service
provider i am getting the following error.

2008-03-31 14:35:07 [22072] [7] DEBUG: boxc_receiver: sms received
2008-03-31 14:35:07 [22072] [7] DEBUG: send_msg: sending msg
to box: <127.0.0.1 >
2008-03-31 14:35:08 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]:
TP-Validity-Period: 24.0 hours
2008-03-31 14:35:08 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: -->
AT+CMGS=24^M
2008-03-31 14:35:08 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <-- >
2008-03-31 14:35:08 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: send
command status: 1
2008-03-31 14:35:08 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: -->
0011000C81194944757277A70BE8329BFD06DDDF723619
2008-03-31 14:35:08 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: --> ^Z
2008-03-31 14:35:10 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <-- >
2008-03-31 14:35:10 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <--
ERROR
2008-03-31 14:35:10 [22072] [4] ERROR: AT2[/dev/ttyUSB0]:
Generic error: ERROR
2008-03-31 14:35:10 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: send
command status: -1
2008-03-31 14:35:10 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: -->
AT+CMGS=24^M
2008-03-31 14:35:10 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <-- >
2008-03-31 14:35:10 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: send
command status: 1
2008-03-31 14:35:10 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: -->
0011000C81194944757277A70BE8329BFD06DDDF723619
2008-03-31 14:35:10 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: --> ^Z
2008-03-31 14:35:12 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <-- >
2008-03-31 14:35:12 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <--
ERROR
2008-03-31 14:35:12 [22072] [4] ERROR: AT2[/dev/ttyUSB0]:
Generic error: ERROR
2008-03-31 14:35:12 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: send
command status: -1
2008-03-31 14:35:12 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: -->
AT+CMGS=24^M
2008-03-31 14:35:12 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <-- >
2008-03-31 14:35:12 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: send
command status: 1
2008-03-31 14:35:12 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: -->
0011000C81194944757277A70BE8329BFD06DDDF723619
2008-03-31 14:35:12 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: --> ^Z
2008-03-31 14:35:15 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <-- >
2008-03-31 14:35:15 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <--
ERROR
2008-03-31 14:35:15 [22072] [4] ERROR: AT2[/dev/ttyUSB0]:
Generic error: ERROR
2008-03-31 14:35:15 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: send
command status: -1

I am uisng debian Linux OS...

Please help

Thanks and Regards,
mathi.




-- 
|-|

Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde
cualquier celular y
Nextel en México y en mas de 180 paises. Use aplicaciones 2 vias
via SMS y GPRS online
Visitenos en www.smsglobal.com.mx  y
www.pravcom.com  

Re: Generic status Error!!!!!! please help

[SELVAMANI GANDHIMATHI]

yes, i am able to send and receive sms over a regular phone
i'll try to enable verbose repots as you told and let u know about the
result..

Thanks,
mathi.

On Mon, Mar 31, 2008 at 4:23 PM, Alvaro Cornejo <[EMAIL PROTECTED]>
wrote:

> can you send/receive sms with those sims on a regular phone?? also try to
> enable verbose repots from your modem. try AT+CMEE=1 or 2 in your config
> fiel under init-string
>
>
>
> On Mon, Mar 31, 2008 at 3:37 AM, SELVAMANI GANDHIMATHI <[EMAIL PROTECTED]>
> wrote:
>
> > Hi all,
> >
> > I installed kannel and used a GSM modem and my BSNL sim with which i
> > could send and receive sms using kannel..
> > but when i tried to change the SIM to HUTCH or AIRTEL service provider i
> > am getting the following error.
> >
> > 2008-03-31 14:35:07 [22072] [7] DEBUG: boxc_receiver: sms received
> > 2008-03-31 14:35:07 [22072] [7] DEBUG: send_msg: sending msg to box: <
> > 127.0.0.1>
> > 2008-03-31 14:35:08 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]:
> > TP-Validity-Period: 24.0 hours
> > 2008-03-31 14:35:08 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: -->
> > AT+CMGS=24^M
> > 2008-03-31 14:35:08 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <-- >
> > 2008-03-31 14:35:08 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: send command
> > status: 1
> > 2008-03-31 14:35:08 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: -->
> > 0011000C81194944757277A70BE8329BFD06DDDF723619
> > 2008-03-31 14:35:08 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: --> ^Z
> > 2008-03-31 14:35:10 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <-- >
> > 2008-03-31 14:35:10 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <-- ERROR
> > 2008-03-31 14:35:10 [22072] [4] ERROR: AT2[/dev/ttyUSB0]: Generic error:
> > ERROR
> > 2008-03-31 14:35:10 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: send command
> > status: -1
> > 2008-03-31 14:35:10 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: -->
> > AT+CMGS=24^M
> > 2008-03-31 14:35:10 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <-- >
> > 2008-03-31 14:35:10 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: send command
> > status: 1
> > 2008-03-31 14:35:10 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: -->
> > 0011000C81194944757277A70BE8329BFD06DDDF723619
> > 2008-03-31 14:35:10 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: --> ^Z
> > 2008-03-31 14:35:12 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <-- >
> > 2008-03-31 14:35:12 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <-- ERROR
> > 2008-03-31 14:35:12 [22072] [4] ERROR: AT2[/dev/ttyUSB0]: Generic error:
> > ERROR
> > 2008-03-31 14:35:12 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: send command
> > status: -1
> > 2008-03-31 14:35:12 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: -->
> > AT+CMGS=24^M
> > 2008-03-31 14:35:12 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <-- >
> > 2008-03-31 14:35:12 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: send command
> > status: 1
> > 2008-03-31 14:35:12 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: -->
> > 0011000C81194944757277A70BE8329BFD06DDDF723619
> > 2008-03-31 14:35:12 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: --> ^Z
> > 2008-03-31 14:35:15 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <-- >
> > 2008-03-31 14:35:15 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <-- ERROR
> > 2008-03-31 14:35:15 [22072] [4] ERROR: AT2[/dev/ttyUSB0]: Generic error:
> > ERROR
> > 2008-03-31 14:35:15 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: send command
> > status: -1
> >
> > I am uisng debian Linux OS...
> >
> > Please help
> >
> > Thanks and Regards,
> > mathi.
> >
>
>
>
> --
>
> |-|
> Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
> celular y
> Nextel en México y en mas de 180 paises. Use aplicaciones 2 vias via SMS y
> GPRS online
> Visitenos en www.smsglobal.com.mx y www.pravcom.com

Re: Force SMSC from HTTP Sendsms

[Nathan Ferris]

Hi Remon,

each of my smsc groups have the two following lines in them:
smsc-id = 
allowed-smsc-id=

for your configuration, this would be:
group = smsc
smsc-id = smsc1
allowed-smsc-id = smsc1
...

group = smsc
smsc-id = smsc2
allowed-smsc-id = smsc2
...

Then when you use the send-sms HTTP interface you should be able to 
specify smsc1 or smsc2.  Take a look at Chapter 6 of the user guide, 
especially the section titled "SMS Centers".  There's info on both 
allowed-smsc-id and allowed-prefix options there.


Nathan


Remon Magdy wrote:


Hello Nathan,

Suppose i have two SMSCs, "smsc1" with allowed prefix 2012 and the 
other "smsc2" with allowed and preferred prefix 2012.


When sending to this prefix even if i set the smsc parameter to smsc1 
it will be sent from smsc2.


My Question is how to force it to go through smsc1 while keeping the 
same above configurations for bearerbox.


Regards,
Remon 



-Original Message-
From: Nathan Ferris [mailto:[EMAIL PROTECTED]
Sent: Mon 3/31/2008 9:58 PM
To: users@kannel.org
Subject: Re: Force SMSC from HTTP Sendsms

Hi Remon,

If you're using the HTTP interface to send SMS messages then you can use
the smsc parameter.  See the "Running SMS gateway" section of the user
guide for details and other parameters that you can use.

Nathan

Remon Magdy wrote:
>
> Hello there,
>
> is there anyway to force an MT message sent from the http interface
> (SMSBOX) to go through a certain SMSC ID?
>
> Regards,
> Remon
>

RE: Force SMSC from HTTP Sendsms

[Raul Igrisan]

Yes, there is a request parameter documented in the user guide.

There are also config parameters regarding routing (also documented).

 

  _  

From: Remon Magdy [mailto:[EMAIL PROTECTED] 
Sent: 31 March 2008 22:43
To: users@kannel.org
Subject: Force SMSC from HTTP Sendsms

 

 

Hello there,

is there anyway to force an MT message sent from the http interface (SMSBOX)
to go through a certain SMSC ID?

Regards,
Remon 

RE: Force SMSC from HTTP Sendsms

[Remon Magdy]

Hello Nathan,

Suppose i have two SMSCs, "smsc1" with allowed prefix 2012 and the other 
"smsc2" with allowed and preferred prefix 2012.

When sending to this prefix even if i set the smsc parameter to smsc1 it will 
be sent from smsc2.

My Question is how to force it to go through smsc1 while keeping the same above 
configurations for bearerbox.

Regards,
Remon  


-Original Message-
From: Nathan Ferris [mailto:[EMAIL PROTECTED]
Sent: Mon 3/31/2008 9:58 PM
To: users@kannel.org
Subject: Re: Force SMSC from HTTP Sendsms
 
Hi Remon,

If you're using the HTTP interface to send SMS messages then you can use 
the smsc parameter.  See the "Running SMS gateway" section of the user 
guide for details and other parameters that you can use.

Nathan

Remon Magdy wrote:
>
> Hello there,
>
> is there anyway to force an MT message sent from the http interface 
> (SMSBOX) to go through a certain SMSC ID?
>
> Regards,
> Remon
>

Re: Force SMSC from HTTP Sendsms

[bh]

Hello.

I'm by no means a Kannel expert, but I found that I also *had* to add:
  denied-smsc-id = viamodem
to my gateway smsc configuration and:
  denied-smsc-id = viagateway
to my modem smsc configuration

(where "viamodem" and "viagateway" are the two active SMSCs in my conf  
file) before it started to actually work -- like I could tell Kannel  
which one I wanted but it didn't really seem to listen until i  
"forbid" the gateway from handling my modem-bound messages and my  
modem from handling my gateway-bound messages with these deny  
statements.


YMMV--
b


On Mar 31, 2008, at 12:58 PM, Nathan Ferris wrote:


Hi Remon,

If you're using the HTTP interface to send SMS messages then you can  
use the smsc parameter.  See the "Running SMS gateway" section of  
the user guide for details and other parameters that you can use.


Nathan

Remon Magdy wrote:



Hello there,

is there anyway to force an MT message sent from the http interface  
(SMSBOX) to go through a certain SMSC ID?


Regards,
Remon

Re: Force SMSC from HTTP Sendsms

[Nathan Ferris]

Hi Remon,

If you're using the HTTP interface to send SMS messages then you can use 
the smsc parameter.  See the "Running SMS gateway" section of the user 
guide for details and other parameters that you can use.


Nathan

Remon Magdy wrote:


Hello there,

is there anyway to force an MT message sent from the http interface 
(SMSBOX) to go through a certain SMSC ID?


Regards,
Remon

Force SMSC from HTTP Sendsms

[Remon Magdy]

Hello there,

is there anyway to force an MT message sent from the http interface (SMSBOX) to 
go through a certain SMSC ID?

Regards,
Remon

RE: FW: Kannel error

[Kevin Reed]

+CNMI=2,2,0,1,0

2 = Buffer unsolicited result codes in the TA when TA-TE link is reserved
and flush them to the TE
after reservation. Otherwise forward them directly to the TE

2= SMS-DELIVERs (except class 2 messages) are routed using unsolicited
code: +CMT:
[,] (PDU mode) or +CMT: ,[,]

[,, , , , , , ] 
(text mode)

0 = No CBM indications are routed to the TE. The CBMs are stored.

1 = SMS-STATUS-REPORTs are routed using unsolicited code: +CDS: 
 
 (PDU mode) or +CDS: ,, [] , [], ,,
(Text mode)

0 = TA buffer of unsolicited result codes defined within this command is
flushed to the TE when
 1…3 is entered (OK response shall be given before flushing the codes)


+CMEE=1

1 = Disables or enables the use of the “+CME ERROR: ” or “+CMS
ERROR:” result code instead of simply “ERROR”.


Ref:
PDF of AT command set for that type of modem:

AT-command-guide.pdf
http://www.zipturtle.com/ukannel/index.php?topic=10.msg12#msg12


> Nathan,
>
>
>
> What does that init string that you posted do?
>
>
>
> 
>
> From: Nathan Ferris [mailto:[EMAIL PROTECTED]
> Sent: Friday, March 28, 2008 12:34 PM
> To: users@kannel.org
> Subject: Re: FW: Kannel error
>
>
>
> I'm using Multitech USB modems, but the config should be the same.  Here's
> what I use:
>
> init-string= AT+CNMI=2,2,0,1,0;+CMEE=1
>
> Are you using the same thing?  If you go in through minicom can you get a
> response out of it?  Have you power cycled the modem?
>
> Nathan
>
> Brandon Blackwell wrote:
>
> I added init-string "AT+CMEE=1"  and the modem quit responding altogether.
>  I tried it with a 2 in there as well and got no responses from it.  I
> removed the init-string for now.  Am I inputting it wrong or something?  I
> put it in the config file under modem.
>
>
>
> 
>
> From: Alvaro Cornejo [mailto:[EMAIL PROTECTED]
> Sent: Friday, March 28, 2008 11:30 AM
> To: users@kannel.org
> Subject: Re: FW: Kannel error
>
>
>
> try to enable verbose login in your modem. add at+cmee=1 or 2 to the init
> string.
>
>
>
> This might give you more information
>
> On Thu, Mar 27, 2008 at 2:58 PM, Nathan Ferris <[EMAIL PROTECTED]>
> wrote:
>
> Strictly anecdotally, I've seen that happen a lot when the modem gets
> interrupted by an incoming message when it is trying to send out a
> message.
>
> Nathan
>
>
>
> Brandon Blackwell wrote:
>
> Yeah that is usually what I end up doing, resetting the modem.  But is
> there any explanation as to why this is occurring or settings I can change
> that might keep this from happening so often?  Having duplicate messages
> sent out is not good.  Does anyone know anything about that send command
> status -1?  It happens every time it sends out a duplicate message.
>
>
>
> 
>
> From: Nathan Ferris [mailto:[EMAIL PROTECTED]
> Sent: Thursday, March 27, 2008 3:14 PM
> To: users@kannel.org
> Subject: Re: FW: Kannel error
>
>
>
> Hi Brandon,
>
> I've seen stuff like this before; you may just need to reset your modem.
> Try this: http://www.mail-archive.com/users@kannel.org/msg11538.html
>
> Nathan
>
> Brandon Blackwell wrote:
>
>
>
> I am using a wavecom multimodem gprs with kannel.  The problem I am having
> is that every so often I get a weird error in the logs and kannel seems to
> send out duplicate and sometimes triplicate messages back to the phones.
> The message I get in the logs is below:
>
>
>
> <-- ERROR
>
> 2008-03-26 18:28:29 [3067] [6] ERROR: AT2[/dev/ttyS0]: Generic error:
> ERROR
>
> 2008-03-26 18:28:29 [3067] [6] DEBUG: AT2[/dev/ttyS0]: send command
> status: -1
>
> 2008-03-26 18:28:29 [3067] [6] DEBUG: AT2[/dev/ttyS0]: --> AT+CMGS=45^M
>
> 2008-03-26 18:28:29 [3067] [6] DEBUG: AT2[/dev/ttyS0]: <--
>
> 2008-03-26 18:28:29 [3067] [6] DEBUG: AT2[/dev/ttyS0]: <-- ERROR
>
> 2008-03-26 18:28:29 [3067] [6] ERROR: AT2[/dev/ttyS0]: Generic error:
> ERROR
>
> 2008-03-26 18:28:29 [3067] [6] DEBUG: AT2[/dev/ttyS0]: send command
> status: -1
>
> 2008-03-26 18:28:34 [3067] [6] DEBUG: AT2[/dev/ttyS0]: <-- ERROR
>
> 2008-03-26 18:28:34 [3067] [6] ERROR: AT2[/dev/ttyS0]: Generic error:
> ERROR
>
>
>
> My kannel.conf setup is as follows:
>
>
>
> group = core
>
> admin-port = 13000
>
> smsbox-port=13001
>
> admin-password = X
>
> log-file = "/var/log/kannel/bearerbox.log"
>
> log-level = 1
>
> box-deny-ip = "*.*.*.*"
>
> box-allow-ip = "127.0.0.1  "
>
>
>
> group = smsc
>
> smsc = at
>
> modemtype = wavecom
>
> device = /dev/ttyS0
>
> speed = 9600
>
> keepalive = 5
>
> max-error-count = 5
>
> my-number = XXX
>
> connect-allow-ip = 127.0.0.1 
>
> log-file = "/var/log/kannel/bearerbox.log"
>
> log-level = 0
>
>
>
> group = smsc
>
> smsc = fake
>
> smsc-id = FAKE
>
> port = 1
>
> connect-allow-ip = 127.0.0.1 
>
>
>
> group = smsbox
>
> bearerbox-host = localhost
>
> sendsms-port = 13013
>
> global-sender = 
>
> log-file = "/var/log/kannel/smsboxaccess.log"
>
> log-lev

Re: kannel

[Alvaro Cornejo]

No, not only with kannel, you need extra software, see mbuni.org, its a mms
"extention"  for kannel

On Mon, Mar 31, 2008 at 3:19 AM, mohmmad jarwan <[EMAIL PROTECTED]>
wrote:

>   Hi
> i want to send MMS and i wandering can i use kannel as mms gateway alone
> ,or i used Mbuni that based on kannel ,or i use Mbuni alone without kannel
> what way more effective and more reliability .
>
> Are three way is true (can send MMS with it)
>
>
> --
> Sent from Yahoo! 
> Mail.
>
> A Smarter Inbox.
>



-- 
|-|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y
Nextel en México y en mas de 180 paises. Use aplicaciones 2 vias via SMS y
GPRS online
Visitenos en www.smsglobal.com.mx y www.pravcom.com

Re: Generic status Error!!!!!! please help

[Alvaro Cornejo]

can you send/receive sms with those sims on a regular phone?? also try to
enable verbose repots from your modem. try AT+CMEE=1 or 2 in your config
fiel under init-string



On Mon, Mar 31, 2008 at 3:37 AM, SELVAMANI GANDHIMATHI <[EMAIL PROTECTED]>
wrote:

> Hi all,
>
> I installed kannel and used a GSM modem and my BSNL sim with which i could
> send and receive sms using kannel..
> but when i tried to change the SIM to HUTCH or AIRTEL service provider i
> am getting the following error.
>
> 2008-03-31 14:35:07 [22072] [7] DEBUG: boxc_receiver: sms received
> 2008-03-31 14:35:07 [22072] [7] DEBUG: send_msg: sending msg to box: <
> 127.0.0.1>
> 2008-03-31 14:35:08 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]:
> TP-Validity-Period: 24.0 hours
> 2008-03-31 14:35:08 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: --> AT+CMGS=24^M
> 2008-03-31 14:35:08 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <-- >
> 2008-03-31 14:35:08 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: send command
> status: 1
> 2008-03-31 14:35:08 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: -->
> 0011000C81194944757277A70BE8329BFD06DDDF723619
> 2008-03-31 14:35:08 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: --> ^Z
> 2008-03-31 14:35:10 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <-- >
> 2008-03-31 14:35:10 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <-- ERROR
> 2008-03-31 14:35:10 [22072] [4] ERROR: AT2[/dev/ttyUSB0]: Generic error:
> ERROR
> 2008-03-31 14:35:10 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: send command
> status: -1
> 2008-03-31 14:35:10 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: --> AT+CMGS=24^M
> 2008-03-31 14:35:10 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <-- >
> 2008-03-31 14:35:10 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: send command
> status: 1
> 2008-03-31 14:35:10 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: -->
> 0011000C81194944757277A70BE8329BFD06DDDF723619
> 2008-03-31 14:35:10 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: --> ^Z
> 2008-03-31 14:35:12 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <-- >
> 2008-03-31 14:35:12 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <-- ERROR
> 2008-03-31 14:35:12 [22072] [4] ERROR: AT2[/dev/ttyUSB0]: Generic error:
> ERROR
> 2008-03-31 14:35:12 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: send command
> status: -1
> 2008-03-31 14:35:12 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: --> AT+CMGS=24^M
> 2008-03-31 14:35:12 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <-- >
> 2008-03-31 14:35:12 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: send command
> status: 1
> 2008-03-31 14:35:12 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: -->
> 0011000C81194944757277A70BE8329BFD06DDDF723619
> 2008-03-31 14:35:12 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: --> ^Z
> 2008-03-31 14:35:15 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <-- >
> 2008-03-31 14:35:15 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <-- ERROR
> 2008-03-31 14:35:15 [22072] [4] ERROR: AT2[/dev/ttyUSB0]: Generic error:
> ERROR
> 2008-03-31 14:35:15 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: send command
> status: -1
>
> I am uisng debian Linux OS...
>
> Please help
>
> Thanks and Regards,
> mathi.
>



-- 
|-|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y
Nextel en México y en mas de 180 paises. Use aplicaciones 2 vias via SMS y
GPRS online
Visitenos en www.smsglobal.com.mx y www.pravcom.com

RE: FW: Kannel error

[Brandon Blackwell]

Nathan, 

 

What does that init string that you posted do?

 



From: Nathan Ferris [mailto:[EMAIL PROTECTED] 
Sent: Friday, March 28, 2008 12:34 PM
To: users@kannel.org
Subject: Re: FW: Kannel error

 

I'm using Multitech USB modems, but the config should be the same.  Here's what 
I use:

init-string= AT+CNMI=2,2,0,1,0;+CMEE=1

Are you using the same thing?  If you go in through minicom can you get a 
response out of it?  Have you power cycled the modem?

Nathan

Brandon Blackwell wrote: 

I added init-string "AT+CMEE=1"  and the modem quit responding altogether.  I 
tried it with a 2 in there as well and got no responses from it.  I removed the 
init-string for now.  Am I inputting it wrong or something?  I put it in the 
config file under modem.

 



From: Alvaro Cornejo [mailto:[EMAIL PROTECTED] 
Sent: Friday, March 28, 2008 11:30 AM
To: users@kannel.org
Subject: Re: FW: Kannel error

 

try to enable verbose login in your modem. add at+cmee=1 or 2 to the init 
string.

 

This might give you more information

On Thu, Mar 27, 2008 at 2:58 PM, Nathan Ferris <[EMAIL PROTECTED]> wrote:

Strictly anecdotally, I've seen that happen a lot when the modem gets 
interrupted by an incoming message when it is trying to send out a message.

Nathan 



Brandon Blackwell wrote: 

Yeah that is usually what I end up doing, resetting the modem.  But is there 
any explanation as to why this is occurring or settings I can change that might 
keep this from happening so often?  Having duplicate messages sent out is not 
good.  Does anyone know anything about that send command status -1?  It happens 
every time it sends out a duplicate message.

 



From: Nathan Ferris [mailto:[EMAIL PROTECTED] 
Sent: Thursday, March 27, 2008 3:14 PM
To: users@kannel.org
Subject: Re: FW: Kannel error

 

Hi Brandon,

I've seen stuff like this before; you may just need to reset your modem.  Try 
this: http://www.mail-archive.com/users@kannel.org/msg11538.html

Nathan

Brandon Blackwell wrote: 

 

I am using a wavecom multimodem gprs with kannel.  The problem I am having is 
that every so often I get a weird error in the logs and kannel seems to send 
out duplicate and sometimes triplicate messages back to the phones.  The 
message I get in the logs is below:

 

<-- ERROR

2008-03-26 18:28:29 [3067] [6] ERROR: AT2[/dev/ttyS0]: Generic error: ERROR

2008-03-26 18:28:29 [3067] [6] DEBUG: AT2[/dev/ttyS0]: send command status: -1

2008-03-26 18:28:29 [3067] [6] DEBUG: AT2[/dev/ttyS0]: --> AT+CMGS=45^M

2008-03-26 18:28:29 [3067] [6] DEBUG: AT2[/dev/ttyS0]: <-- 

2008-03-26 18:28:29 [3067] [6] DEBUG: AT2[/dev/ttyS0]: <-- ERROR

2008-03-26 18:28:29 [3067] [6] ERROR: AT2[/dev/ttyS0]: Generic error: ERROR

2008-03-26 18:28:29 [3067] [6] DEBUG: AT2[/dev/ttyS0]: send command status: -1

2008-03-26 18:28:34 [3067] [6] DEBUG: AT2[/dev/ttyS0]: <-- ERROR

2008-03-26 18:28:34 [3067] [6] ERROR: AT2[/dev/ttyS0]: Generic error: ERROR

 

My kannel.conf setup is as follows:

 

group = core

admin-port = 13000

smsbox-port=13001

admin-password = X

log-file = "/var/log/kannel/bearerbox.log"

log-level = 1

box-deny-ip = "*.*.*.*"

box-allow-ip = "127.0.0.1  "

 

group = smsc

smsc = at

modemtype = wavecom

device = /dev/ttyS0

speed = 9600

keepalive = 5

max-error-count = 5

my-number = XXX

connect-allow-ip = 127.0.0.1  

log-file = "/var/log/kannel/bearerbox.log"

log-level = 0

 

group = smsc

smsc = fake

smsc-id = FAKE

port = 1

connect-allow-ip = 127.0.0.1  

 

group = smsbox

bearerbox-host = localhost

sendsms-port = 13013

global-sender = 

log-file = "/var/log/kannel/smsboxaccess.log"

log-level = 0

 

group = sendsms-user

username = XX

password = XX

concatenation = true

max-messages = 1

 

group = sms-service

keyword = 

keyword-regex = .*

catch-all = yes

max-messages = 1

post-url = 

 

group = mysql-connection

host = XX

username = X

password = X

database = XX

 

group = modems

id = wavecom

name = Wavecom

detect-string = "WAVECOM"

reset-string = "AT+CFUN=1"

no-pin = true

 

 

Any help you can provide would be great.  If you need any further information 
please just let me know.  Thanks.

***CONFIDENTIALITY NOTICE and DISCLAIMER***
This message and any attachment are confidential and may be privileged or 
otherwise protected from disclosure and solely for the use of the person(s) or 
entity to which it is intended. If you have received this message in error and 
are not the intended recipient, please notify the sender immediately and delete 
this message and any attachment from your system. If you are not the intended 
recipient, be advised that any use of this message is prohibited and may be 
unlawful, and you must not copy this message or attachment or disclose the 
contents to 

RE: FW: Kannel error

[Brandon Blackwell]

Nathan,

 

I am using the serial version of that modem.  Yes I can go in through minicom 
and get a response out of it.  Usually when it starts sending out duplicates I 
can restart kannel and it will clear up for a while.  If it totally freezes I 
usually power cycle it.  I will try using your init string again and see if it 
makes any difference.  Thanks for the suggestions.

 



From: Nathan Ferris [mailto:[EMAIL PROTECTED] 
Sent: Friday, March 28, 2008 12:34 PM
To: users@kannel.org
Subject: Re: FW: Kannel error

 

I'm using Multitech USB modems, but the config should be the same.  Here's what 
I use:

init-string= AT+CNMI=2,2,0,1,0;+CMEE=1

Are you using the same thing?  If you go in through minicom can you get a 
response out of it?  Have you power cycled the modem?

Nathan

Brandon Blackwell wrote: 

I added init-string "AT+CMEE=1"  and the modem quit responding altogether.  I 
tried it with a 2 in there as well and got no responses from it.  I removed the 
init-string for now.  Am I inputting it wrong or something?  I put it in the 
config file under modem.

 



From: Alvaro Cornejo [mailto:[EMAIL PROTECTED] 
Sent: Friday, March 28, 2008 11:30 AM
To: users@kannel.org
Subject: Re: FW: Kannel error

 

try to enable verbose login in your modem. add at+cmee=1 or 2 to the init 
string.

 

This might give you more information

On Thu, Mar 27, 2008 at 2:58 PM, Nathan Ferris <[EMAIL PROTECTED]> wrote:

Strictly anecdotally, I've seen that happen a lot when the modem gets 
interrupted by an incoming message when it is trying to send out a message.

Nathan 



Brandon Blackwell wrote: 

Yeah that is usually what I end up doing, resetting the modem.  But is there 
any explanation as to why this is occurring or settings I can change that might 
keep this from happening so often?  Having duplicate messages sent out is not 
good.  Does anyone know anything about that send command status -1?  It happens 
every time it sends out a duplicate message.

 



From: Nathan Ferris [mailto:[EMAIL PROTECTED] 
Sent: Thursday, March 27, 2008 3:14 PM
To: users@kannel.org
Subject: Re: FW: Kannel error

 

Hi Brandon,

I've seen stuff like this before; you may just need to reset your modem.  Try 
this: http://www.mail-archive.com/users@kannel.org/msg11538.html

Nathan

Brandon Blackwell wrote: 

 

I am using a wavecom multimodem gprs with kannel.  The problem I am having is 
that every so often I get a weird error in the logs and kannel seems to send 
out duplicate and sometimes triplicate messages back to the phones.  The 
message I get in the logs is below:

 

<-- ERROR

2008-03-26 18:28:29 [3067] [6] ERROR: AT2[/dev/ttyS0]: Generic error: ERROR

2008-03-26 18:28:29 [3067] [6] DEBUG: AT2[/dev/ttyS0]: send command status: -1

2008-03-26 18:28:29 [3067] [6] DEBUG: AT2[/dev/ttyS0]: --> AT+CMGS=45^M

2008-03-26 18:28:29 [3067] [6] DEBUG: AT2[/dev/ttyS0]: <-- 

2008-03-26 18:28:29 [3067] [6] DEBUG: AT2[/dev/ttyS0]: <-- ERROR

2008-03-26 18:28:29 [3067] [6] ERROR: AT2[/dev/ttyS0]: Generic error: ERROR

2008-03-26 18:28:29 [3067] [6] DEBUG: AT2[/dev/ttyS0]: send command status: -1

2008-03-26 18:28:34 [3067] [6] DEBUG: AT2[/dev/ttyS0]: <-- ERROR

2008-03-26 18:28:34 [3067] [6] ERROR: AT2[/dev/ttyS0]: Generic error: ERROR

 

My kannel.conf setup is as follows:

 

group = core

admin-port = 13000

smsbox-port=13001

admin-password = X

log-file = "/var/log/kannel/bearerbox.log"

log-level = 1

box-deny-ip = "*.*.*.*"

box-allow-ip = "127.0.0.1  "

 

group = smsc

smsc = at

modemtype = wavecom

device = /dev/ttyS0

speed = 9600

keepalive = 5

max-error-count = 5

my-number = XXX

connect-allow-ip = 127.0.0.1  

log-file = "/var/log/kannel/bearerbox.log"

log-level = 0

 

group = smsc

smsc = fake

smsc-id = FAKE

port = 1

connect-allow-ip = 127.0.0.1  

 

group = smsbox

bearerbox-host = localhost

sendsms-port = 13013

global-sender = 

log-file = "/var/log/kannel/smsboxaccess.log"

log-level = 0

 

group = sendsms-user

username = XX

password = XX

concatenation = true

max-messages = 1

 

group = sms-service

keyword = 

keyword-regex = .*

catch-all = yes

max-messages = 1

post-url = 

 

group = mysql-connection

host = XX

username = X

password = X

database = XX

 

group = modems

id = wavecom

name = Wavecom

detect-string = "WAVECOM"

reset-string = "AT+CFUN=1"

no-pin = true

 

 

Any help you can provide would be great.  If you need any further information 
please just let me know.  Thanks.

***CONFIDENTIALITY NOTICE and DISCLAIMER***
This message and any attachment are confidential and may be privileged or 
otherwise protected from disclosure and solely for the use of the person(s) or 
entity to which it is intended. If you have received this message in error and 
are 

RE: SAR parameter

[ashwani]

Hi Hafez, 

 

No, the problem has yet not solved. I have searched the net but there was no
solution to it.

 

Actually, as per SMPP Protocol, the SMSC can send the long message in 2
formats to the ESME (kannel in our case)

1.  Long message information in Separate UDH with the message body
2.  Or, Long message information in "SAR " parameter which are in the
message body as "additional Parameter"

 

Now, there is a patch for the 1st format, which can be applied to kannel.
After that, kannel will assemble the long message after combining all the
parts and deliver it to the application. 

 

But in 2nd scenario, there is no solution ( at least I haven't found till
now)

 

Hope this will help

 

Regards,

Ashwani Kumar

  _  

From: hafez ahmad [mailto:[EMAIL PROTECTED] 
Sent: Monday, March 31, 2008 6:09 PM
To: ashwani
Subject: Re: SAR parameter

 

hi ashwani,

did you solve this problem? , please help.

Thanks,
Hafez

On Tue, Dec 11, 2007 at 3:57 PM, ashwani <[EMAIL PROTECTED]> wrote:

Hi Everyone,

I am using kannel 1.4.1 on a centOS system. The operator which whom I am
connecting is sending the long message information in SAR parameter of SMPP
Protocol. 

Can kannel use these parameter to combine the segment of long sms into one
single Long SMS and then forward to the programming file?

 

Here are the Bearerbox logs

 

2007-07-26 17:00:22 [5138] [6] DEBUG:   sar_msg_ref_num: 14 = 0x000e

2007-07-26 17:00:22 [5138] [6] DEBUG:   sar_total_segments: 2 = 0x0002

2007-07-26 17:00:22 [5138] [6] DEBUG:   sar_segment_seqnum: 1 = 0x0001

 

Thanks in advance

 

Regards

 

Ashwani Kumar




-- 
Hafez A.Ahmad
Amman-Jordan
mobile:962-785259011
962-795708728
http://blog.hafezadnan.com 

Re: MMS wap gateway

[Remon Magdy]

I successfully installed NowSMS on linux using wine.

Regards,
Remon

Michael Sole wrote:


Not on Linux (that I know off).

 


There is a windows based app call SMSNow which is pretty good.

 


*From:* mohmmad jarwan [mailto:[EMAIL PROTECTED]
*Sent:* Monday, March 31, 2008 8:43 AM
*To:* [EMAIL PROTECTED]
*Cc:* users@kannel.org
*Subject:* UNS: Re: MMS wap gateway

 


thanx  for that but is ther any solution without using Mbuni.

- Original Message 
From: Michael Sole <[EMAIL PROTECTED]>
To: mohmmad jarwan <[EMAIL PROTECTED]>
Sent: Monday, 31 March, 2008 3:33:38 PM
Subject: RE: MMS wap gateway

You need to use Mbuni and Kannel.

 


*From:* mohmmad jarwan [mailto:[EMAIL PROTECTED]
*Sent:* Monday, March 31, 2008 8:19 AM
*To:* users@kannel.org
*Subject:* MMS wap gateway

 


Hi
i want to send MMS and i wandering can i use kannel as mms gateway 
alone ,or i used Mbuni that based on kannel ,or i use Mbuni alone 
without kannel

what way more effective and more reliability .

Are three way is true (can send MMS with it)

 




Yahoo! for Good helps you make a difference 



 

 




Yahoo! for Good helps you make a difference 

Re: MMS wap gateway

[Remon Magdy]

You need to use Mbuni as VAS MMS gateway for sending MMS, kannel itself 
doesn't have any MMS modules. On the other hand to install Mbuni and 
start working with it, you should have Kannel installed on the same 
server. There is no need for Kannel to be running but it should be 
installed.


Regards,
Remon

mohmmad jarwan wrote:

Hi
i want to send MMS and i wandering can i use kannel as mms gateway 
alone ,or i used Mbuni that based on kannel ,or i use Mbuni alone 
without kannel

what way more effective and more reliability .

Are three way is true (can send MMS with it)


Yahoo! for Good helps you make a difference 

Re: Re: MMS wap gateway

[mohmmad jarwan]

ok thanx

- Original Message 
From: Michael Sole <[EMAIL PROTECTED]>
To: mohmmad jarwan <[EMAIL PROTECTED]>
Cc: users@kannel.org
Sent: Monday, 31 March, 2008 3:45:19 PM
Subject: RE: Re: MMS wap gateway

  

Not on Linux (that I know off).
   
 There is a windows based app call SMSNow which is pretty good.
   
 From: mohmmad jarwan[mailto:[EMAIL PROTECTED] 
Sent: Monday, March 31, 2008 8:43 AM
To: [EMAIL PROTECTED]
Cc: users@kannel.org
Subject: UNS: Re: MMS wap gateway
 

  
 thanx  for that but is
ther any solution without using Mbuni.
 - Original Message 
From: Michael Sole <[EMAIL PROTECTED]>
To: mohmmad jarwan <[EMAIL PROTECTED]>
Sent: Monday, 31 March, 2008 3:33:38 PM
Subject: RE: MMS wap gateway
 You need to use Mbuni and Kannel.
  
 From: mohmmad jarwan[mailto:[EMAIL PROTECTED] 
Sent: Monday, March 31, 2008 8:19 AM
To: users@kannel.org
Subject: MMS wap gateway
 

 
 Hi 
i want to send MMS and i wandering can i use kannel as mms gateway alone ,or i 
usedMbuni that based on kannel ,or i use Mbuni alone without kannel 
what way more effective and more reliability .

Are three way is true (can send MMS with it)
 

 
 
Yahoo! for Good helps you make a difference
 

  
 

  
 
Yahoo! for Good helps you make
a difference
 






  __
Sent from Yahoo! Mail.
A Smarter Inbox http://uk.docs.yahoo.com/nowyoucan.html

RE: Re: MMS wap gateway

[Michael Sole]

Not on Linux (that I know off).

 

There is a windows based app call SMSNow which is pretty good.

 

From: mohmmad jarwan [mailto:[EMAIL PROTECTED] 
Sent: Monday, March 31, 2008 8:43 AM
To: [EMAIL PROTECTED]
Cc: users@kannel.org
Subject: UNS: Re: MMS wap gateway

 

thanx  for that but is ther any solution without using Mbuni.

- Original Message 
From: Michael Sole <[EMAIL PROTECTED]>
To: mohmmad jarwan <[EMAIL PROTECTED]>
Sent: Monday, 31 March, 2008 3:33:38 PM
Subject: RE: MMS wap gateway

You need to use Mbuni and Kannel.

 

From: mohmmad jarwan [mailto:[EMAIL PROTECTED] 
Sent: Monday, March 31, 2008 8:19 AM
To: users@kannel.org
Subject: MMS wap gateway

 

Hi 
i want to send MMS and i wandering can i use kannel as mms gateway alone ,or i 
used Mbuni that based on kannel ,or i use Mbuni alone without kannel 
what way more effective and more reliability .

Are three way is true (can send MMS with it)

 

  _  

Yahoo! for Good helps you make a difference 

 

 

 

  _  

Yahoo! for Good helps you make 

  a difference

Re: MMS wap gateway

[mohmmad jarwan]

thanx  for that but is ther any solution without using Mbuni.

- Original Message 
From: Michael Sole <[EMAIL PROTECTED]>
To: mohmmad jarwan <[EMAIL PROTECTED]>
Sent: Monday, 31 March, 2008 3:33:38 PM
Subject: RE: MMS wap gateway

  

You need to use Mbuni and Kannel.
   
 From: mohmmad jarwan[mailto:[EMAIL PROTECTED] 
Sent: Monday, March 31, 2008 8:19 AM
To: users@kannel.org
Subject: MMS wap gateway
 

  
 Hi 
i want to send MMS and i wandering can i use kannel as mms gateway alone ,or 
iused Mbuni that based on kannel ,or i use Mbuni alone without kannel 
what way more effective and more reliability .

Are three way is true (can send MMS with it)
 

  
 
Yahoo! for Good helps you make
a difference
 






  __
Sent from Yahoo! Mail.
A Smarter Inbox http://uk.docs.yahoo.com/nowyoucan.html

RE: MMS wap gateway

[Aamir Jamil Rao]

Hi Jarwan,

 

For sending MMS , you can use Mbuni alone with MM7 acting as VAS gateway , or 
You can use Mbuni as standalone MMSC , you will have to use kannel with it for 
sending MMS notifications.

 

Kannel alone is only used for sending text messages and not MMS.

 

-junaid

 

 

From: mohmmad jarwan [mailto:[EMAIL PROTECTED] 
Sent: Monday, March 31, 2008 5:19 PM
To: users@kannel.org
Subject: MMS wap gateway

 

Hi 
i want to send MMS and i wandering can i use kannel as mms gateway alone ,or i 
used Mbuni that based on kannel ,or i use Mbuni alone without kannel 
what way more effective and more reliability .

Are three way is true (can send MMS with it)

 

  _  

Yahoo! for Good helps you make 

  a difference

MMS wap gateway

[mohmmad jarwan]

Hi 
i want to send MMS and i wandering can i use kannel as mmsgateway alone ,or i 
used Mbuni that based on kannel ,or i use Mbunialone without kannel 
what way more effective and more reliability .

Are three way is true (can send MMS with it)



  __
Sent from Yahoo! Mail.
A Smarter Inbox http://uk.docs.yahoo.com/nowyoucan.html

Generic status Error!!!!!! please help

[SELVAMANI GANDHIMATHI]

Hi all,

I installed kannel and used a GSM modem and my BSNL sim with which i could
send and receive sms using kannel..
but when i tried to change the SIM to HUTCH or AIRTEL service provider i am
getting the following error.

2008-03-31 14:35:07 [22072] [7] DEBUG: boxc_receiver: sms received
2008-03-31 14:35:07 [22072] [7] DEBUG: send_msg: sending msg to box: <
127.0.0.1>
2008-03-31 14:35:08 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]:
TP-Validity-Period: 24.0 hours
2008-03-31 14:35:08 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: --> AT+CMGS=24^M
2008-03-31 14:35:08 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <-- >
2008-03-31 14:35:08 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: send command
status: 1
2008-03-31 14:35:08 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: -->
0011000C81194944757277A70BE8329BFD06DDDF723619
2008-03-31 14:35:08 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: --> ^Z
2008-03-31 14:35:10 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <-- >
2008-03-31 14:35:10 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <-- ERROR
2008-03-31 14:35:10 [22072] [4] ERROR: AT2[/dev/ttyUSB0]: Generic error:
ERROR
2008-03-31 14:35:10 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: send command
status: -1
2008-03-31 14:35:10 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: --> AT+CMGS=24^M
2008-03-31 14:35:10 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <-- >
2008-03-31 14:35:10 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: send command
status: 1
2008-03-31 14:35:10 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: -->
0011000C81194944757277A70BE8329BFD06DDDF723619
2008-03-31 14:35:10 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: --> ^Z
2008-03-31 14:35:12 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <-- >
2008-03-31 14:35:12 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <-- ERROR
2008-03-31 14:35:12 [22072] [4] ERROR: AT2[/dev/ttyUSB0]: Generic error:
ERROR
2008-03-31 14:35:12 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: send command
status: -1
2008-03-31 14:35:12 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: --> AT+CMGS=24^M
2008-03-31 14:35:12 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <-- >
2008-03-31 14:35:12 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: send command
status: 1
2008-03-31 14:35:12 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: -->
0011000C81194944757277A70BE8329BFD06DDDF723619
2008-03-31 14:35:12 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: --> ^Z
2008-03-31 14:35:15 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <-- >
2008-03-31 14:35:15 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: <-- ERROR
2008-03-31 14:35:15 [22072] [4] ERROR: AT2[/dev/ttyUSB0]: Generic error:
ERROR
2008-03-31 14:35:15 [22072] [4] DEBUG: AT2[/dev/ttyUSB0]: send command
status: -1

I am uisng debian Linux OS...

Please help

Thanks and Regards,
mathi.

kannel

[mohmmad jarwan]

 Hi 
i want to send MMS and i wandering can i use kannel as mms gateway alone ,or i 
used Mbuni that based on kannel ,or i use Mbuni alone without kannel 
what way more effective and more reliability .

Are three way is true (can send MMS with it)





  ___ 
Yahoo! For Good helps you make a difference  

http://uk.promotions.yahoo.com/forgood/