Re: [Users] Migration from NFS backed VM to iSCSI LUN without exporting them on the Ovirt Export Share
On 01/09/2014 10:16 AM, squadra wrote: Hello folks, since the nfs discussion remembered me that i got some vm left to migrate... here some kind of special question. i am open for non-bestpractice hacky solutions, too Situation is: - 2 Ovirt Cluster - Same DC - one NFS backed, one iSCSI backed - NFS Share and iSCSI Share are exported from the same phys. Machine - Bot DC use the same filer, just different Luns / Protocolls so, i thought about something simple like just move vm folder from a to b and do a little bit database voodoo? anyone did something like this yet? or is storage live migration already working for this? the docs didnt tell me very much about this. are the VMs thin or pre-allocated? with or without snapshots? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Blank VM Install Console
The node is up and running. I can ssh in no problem. VM is started and running ok with 0% CPU 3% memory. I don't know how to connect VNC to it, my VNC console option is grayed out. I also tried browser plugin option by installing spice-xpi on my RHEL6 (which runs the firefox browser). Now when the console is launched, a popup window shows up but then an error Unable to connect to the graphic server. - Original Message - From: Itamar Heim ih...@redhat.com To: David Li david...@sbcglobal.net; Michal Skrivanek michal.skriva...@redhat.com Cc: users@ovirt.org List users@ovirt.org Sent: Friday, January 17, 2014 2:38 PM Subject: Re: [Users] Blank VM Install Console On 01/18/2014 12:30 AM, David Li wrote: This time I tried to use spice html5 browser client. I downloaded the cert from http://my-engine/ovirt-engine/ca.crt. This time the console window spice javascript client showed up in the firefox (24.2.0) but it stays gray. Nothing can be seen. So what else am I missing here? just to rule out things: - is the geust working correctly for you (ssh?) - does it happen to consume 100% cpu? - does vnc work for you correctly for this guest? - Original Message - From: Michal Skrivanek michal.skriva...@redhat.com To: David Li david...@sbcglobal.net Cc: Meital Avital mavi...@redhat.com; Einav Cohen eco...@redhat.com; Omer Frenkel ofren...@redhat.com; users@ovirt.org List users@ovirt.org; d...@redhat.com Ron d...@redhat.com Sent: Friday, January 17, 2014 1:12 AM Subject: Re: [Users] Blank VM Install Console On Jan 17, 2014, at 09:59 , Dafna Ron d...@redhat.com wrote: well, I have to admit that it has been a while since I tried logging in to a vm console from a Windows OS :) Adding some people to this which I think can help more than me... On 01/17/2014 12:58 AM, David Li wrote: Well, it didn't even have any traces to tell me if it's installed. I am supposed to see these according to the instruction but none of them showed up. * IE will prompt you with This website wants to install the following add-on SpiceX.cab... proceed by clicking the arrow on the install button and choose Install for All Users of this computer. * Depending on the version of IE a UAC dialog may pop up asking you if you want to allow SpiceX.cab If it does not Click on the install spice button again and it will. * In the UAC dialog click on the yes button. * The install will now proceed in the background. I am using W7 64bit with IE11. My engine is running on a RHEL6 machine. IE11 doesn't really work as of now. Try some more reasonable browser, IE10 would be also fine. activex setup requires some manual work as mentione at How_to_Connect_to_SPICE_Console_With_Portal wiki native invocation (that file to download you got) is easier, just associate with recent remote viewer and it should open it works on Windows, Linux and OSX (needs https://github.com/brianwcook/launchvv in addition) check out http://www.ovirt.org/Console_Client_Resources Thanks, mcihal - Original Message - From: Dafna Ron d...@redhat.com To: David Li david...@sbcglobal.net Cc: Madhav V Diwan mdi...@diwanconsulting.com; users@ovirt.org users@ovirt.org Sent: Thursday, January 16, 2014 4:16 PM Subject: Re: [Users] Blank VM Install Console 1. did you restart you're firefox after install? 2. what OS are you using? On 01/16/2014 11:40 PM, David Li wrote: This isn't working for me at this time. I have gone to the end of the instructions and clicked on Install Spice button in IE but nothing happened. Maybe someone with more knowledge should come out and make clarifications. - Original Message - From: Madhav V Diwan mdi...@diwanconsulting.com To: David Li david...@sbcglobal.net Cc: users@ovirt.org users@ovirt.org Sent: Thursday, January 16, 2014 1:51 PM Subject: Re: [Users] Blank VM Install Console yuck i dont know why they do not just have this already done in an rpm yes it probably works , i have not tested it , but virt-viewer is deprecated in favor of the newer Remote-Viewer by the way worst comes to worst you can always connect to the ovirt vm node server via virt-manager gui in linux .. or using macports virt-manager in OSX and as long as you have a username and password set up in libvirt password db /etc/libvirt/passwd.db use saslpasswd2 -a libvirt $USER on your ovirt vm host node to add your user account so you dont mess with ovirt's if you have winaxe or some other Xwindows on your windows machine you could probably just ssh with putty.exe to your ovirt node server and run virt-manager from there while
Re: [Users] VM MAC-Ranges and setting custom MACs via API
On 01/06/2014 10:02 AM, Sven Kieske wrote: Hi, thanks for your answers so far, Omer provided me already with an example of the changed properties: deleteProtected turns into delete_protected is there a complete list somewhere? this would be helpful to maintain our code and to prevent errors when we upgrade to 3.4. somewhere in time. Do these changes just occur for json or also for other APIs? my understanding this is only for json - part of making it supported and well behaved. Am 05.01.2014 22:19, schrieb Itamar Heim: some property name changes will happen (juan can provide more details). ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Blank VM Install Console
On 01/18/2014 12:49 AM, David Li wrote: The node is up and running. I can ssh in no problem. VM is started and running ok with 0% CPU 3% memory. I don't know how to connect VNC to it, my VNC console option is grayed out. stop the VM. edit it, change console from spice to vnc, start VM, connect to it again with vnc. I also tried browser plugin option by installing spice-xpi on my RHEL6 (which runs the firefox browser). Now when the console is launched, a popup window shows up but then an error Unable to connect to the graphic server. - Original Message - From: Itamar Heim ih...@redhat.com To: David Li david...@sbcglobal.net; Michal Skrivanek michal.skriva...@redhat.com Cc: users@ovirt.org List users@ovirt.org Sent: Friday, January 17, 2014 2:38 PM Subject: Re: [Users] Blank VM Install Console On 01/18/2014 12:30 AM, David Li wrote: This time I tried to use spice html5 browser client. I downloaded the cert from http://my-engine/ovirt-engine/ca.crt. This time the console window spice javascript client showed up in the firefox (24.2.0) but it stays gray. Nothing can be seen. So what else am I missing here? just to rule out things: - is the geust working correctly for you (ssh?) - does it happen to consume 100% cpu? - does vnc work for you correctly for this guest? - Original Message - From: Michal Skrivanek michal.skriva...@redhat.com To: David Li david...@sbcglobal.net Cc: Meital Avital mavi...@redhat.com; Einav Cohen eco...@redhat.com; Omer Frenkel ofren...@redhat.com; users@ovirt.org List users@ovirt.org; d...@redhat.com Ron d...@redhat.com Sent: Friday, January 17, 2014 1:12 AM Subject: Re: [Users] Blank VM Install Console On Jan 17, 2014, at 09:59 , Dafna Ron d...@redhat.com wrote: well, I have to admit that it has been a while since I tried logging in to a vm console from a Windows OS :) Adding some people to this which I think can help more than me... On 01/17/2014 12:58 AM, David Li wrote: Well, it didn't even have any traces to tell me if it's installed. I am supposed to see these according to the instruction but none of them showed up. * IE will prompt you with This website wants to install the following add-on SpiceX.cab... proceed by clicking the arrow on the install button and choose Install for All Users of this computer. * Depending on the version of IE a UAC dialog may pop up asking you if you want to allow SpiceX.cab If it does not Click on the install spice button again and it will. * In the UAC dialog click on the yes button. * The install will now proceed in the background. I am using W7 64bit with IE11. My engine is running on a RHEL6 machine. IE11 doesn't really work as of now. Try some more reasonable browser, IE10 would be also fine. activex setup requires some manual work as mentione at How_to_Connect_to_SPICE_Console_With_Portal wiki native invocation (that file to download you got) is easier, just associate with recent remote viewer and it should open it works on Windows, Linux and OSX (needs https://github.com/brianwcook/launchvv in addition) check out http://www.ovirt.org/Console_Client_Resources Thanks, mcihal - Original Message - From: Dafna Ron d...@redhat.com To: David Li david...@sbcglobal.net Cc: Madhav V Diwan mdi...@diwanconsulting.com; users@ovirt.org users@ovirt.org Sent: Thursday, January 16, 2014 4:16 PM Subject: Re: [Users] Blank VM Install Console 1. did you restart you're firefox after install? 2. what OS are you using? On 01/16/2014 11:40 PM, David Li wrote: This isn't working for me at this time. I have gone to the end of the instructions and clicked on Install Spice button in IE but nothing happened. Maybe someone with more knowledge should come out and make clarifications. - Original Message - From: Madhav V Diwan mdi...@diwanconsulting.com To: David Li david...@sbcglobal.net Cc: users@ovirt.org users@ovirt.org Sent: Thursday, January 16, 2014 1:51 PM Subject: Re: [Users] Blank VM Install Console yuck i dont know why they do not just have this already done in an rpm yes it probably works , i have not tested it , but virt-viewer is deprecated in favor of the newer Remote-Viewer by the way worst comes to worst you can always connect to the ovirt vm node server via virt-manager gui in linux .. or using macports virt-manager in OSX and as long as you have a username and password set up in libvirt password db /etc/libvirt/passwd.db use saslpasswd2 -a libvirt $USER on your ovirt vm host node to add your user account so you dont mess with ovirt's if you have winaxe or some other Xwindows on your windows machine you could
Re: [Users] Create VLAN for WAN traffic
On 12/31/2013 03:43 PM, Neil Schulz wrote: On 12/31/2013 3:02 AM, Sander Grendelman wrote: On Mon, Dec 30, 2013 at 7:57 PM, Neil Schulz neil.sch...@neteasy.us mailto:neil.sch...@neteasy.us wrote: I'm not very knowledgeable in VLANs. Sorry for the lack of knowledge in advance. Is it possible to create a VLAN for WAN traffic, to separate it from the internal network? I'd imagine so. It was a automated and simple process when use XenServer. I'm trying to switch from Xen to oVirt and when trying to recreate this, I'm unable to ping out from the VM. This leads me to believe the VLAN was created incorrectly. I created ifcfg-br1 on the host and through the engine, created the logical network with VLAN tagging 20. Does the interface, ifcfg-br1, require a public IP, any IP address, no ip address? (Sorry, never created a VLAN for WAN traffic as it was automated in XenServer) Assigning an IP-address to a VM network in oVirt is _not_ mandatory, it is only needed for management networks (ovirtmgmnt, display, storage) where the _hosts_ need connectivity to resources on that network. Is this a tagged or an untagged vlan? (an untagged vlan means only one vlan per physical interface andneeds no extra configuration on the OS side) Which other (physical) interfaces are in your br1 interface? Are the (tagged) vlans assigned to this interface? A vlan interface on linux looks like this: eth0.20 where eth0 is the physical interface on which tagged vlans are configured and 20 is the number of one of those interfaces. In the case of an oVirt VM network the physical interface is bridged (and sometimes bonded) so the interface configuration looks like this: br1.20. The normal route for configuring a new network in ovirt is to configure it in the networks tab (as a VM network) and then assigin this network to physical- or bonded interfaces on all the hosts in your cluster. So the steps I have taken to create this. 1. Assign the 2nd physical interface a static IP. 2. In oVirt Engine, go to Data Centers and select Logical Networks then New. For name, something like public_interface, check Enable VLAN tagging and for the field entry, 20. Leave defaults, such as VM network checked. 3. Go to Hosts then Network Interfaces then Setup Host Networks. Drag public_interface to the physical interface, em2. Save configuration. 4. This shows as public_interface (VLAN20) with the green box VM next to it. 5. A fresh installed VM of CentOS6.5 is used with nic1 as public_interface. 6. After configuring the interface eth0 with a public IP, I am unable to ping any public IP or hostname. Hopefully there's a flaw in the action I took to configure it and it's a simple fix. was this resolved? Thank you, Neil From there I have the VM installed and configured with a public IP address, however, only get Destination Host Unreachable, meaning it has no route out. I am banging my head on the desk trying to figure this out. Can anyone give me any assistance? Thank you, Neil ___ Users mailing list Users@ovirt.org mailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Migration from NFS backed VM to iSCSI LUN without exporting them on the Ovirt Export Share
On Fri, Jan 17, 2014 at 11:48 PM, Itamar Heim ih...@redhat.com wrote: On 01/09/2014 10:16 AM, squadra wrote: Hello folks, since the nfs discussion remembered me that i got some vm left to migrate... here some kind of special question. i am open for non-bestpractice hacky solutions, too Situation is: - 2 Ovirt Cluster - Same DC - one NFS backed, one iSCSI backed - NFS Share and iSCSI Share are exported from the same phys. Machine - Bot DC use the same filer, just different Luns / Protocolls so, i thought about something simple like just move vm folder from a to b and do a little bit database voodoo? anyone did something like this yet? or is storage live migration already working for this? the docs didnt tell me very much about this. are the VMs thin or pre-allocated? with or without snapshots? mostly thin, but i wouldnt care about loosing the thin feature since the underlaying filer runs zfs with compression. and nop, no snaps through ovirt. you got some ugly hack suggestion for me? :D edit: whoops, sorry wasnt targeted to only send the mail to you itamar. will take more care about! -- Sent from the Delta quadrant using Borg technology! ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Move disk to new AIO?
On 01/03/2014 06:45 AM, Blaster wrote: I have my current ovirt 3.3.2 AIO setup running on old hardware that I wish to move to new hardware. All my VMs and associated virtual disks are on a single physical disk. I can’t seem to find a nice way to “export” that disk and VMs, remove it, and re-import the whole mess into a new hypervisor. (at least w/o not having to bounce it all off of another NFS datastore…) I don’t want to cluster them as they are significantly different hardware, and I want to keep them as separate environments anyways… ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users well, you can put two clusters of different hardware in the same DC, then simply 'edit vm' and move it to the other cluster? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] New user to oVirt, and I haz a sad so far...
OK, I will open a bug; trying now to bring up the node using CentOS 6.5 minimal, will keep good notes this time on what I have to do to get it connected to the engine. Thanks, Will -Original Message- From: Itamar Heim [mailto:ih...@redhat.com] Sent: Friday, January 17, 2014 3:34 PM To: Willard Dennis; Einav Cohen Cc: users@ovirt.org Subject: Re: [Users] New user to oVirt, and I haz a sad so far... On 01/17/2014 07:31 PM, Willard Dennis wrote: Uuup! :) Thanks for your assistance, Einav! Now onwards Hi Will, this should work out of the box. would help if you can open a bug on this not happening so it will be verified it does work out of the box. Thanks, Itamar Date: Fri, 17 Jan 2014 12:18:30 -0500 From: eco...@redhat.com To: willardden...@live.com CC: n...@nieuwland.nl; users@ovirt.org Subject: Re: [Users] New user to oVirt, and I haz a sad so far... go to the Network Interface sub-tab of that node and click the Setup Host Networks button. In the dialog that has opened, attach the 'ovirtmgmt' network from the right-hand side of the dialog to one of your node's NICs on the left-hand side by dragging that network onto the NIC. click OK. after a short while, your Host should become 'Up'. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] oVirt Node ISO for oVirt 3.3 - Draft image for testing
Hi, Could you explain this a bit more? Did all NICs appear, or did to many NICs appear? I'm used to udev leave my NIC in sequence. And in this case it got messed up: common: eth0 - port 1 eth1 - port 2 ethx port X What happened: eth0 - port 1 eth4 - port 3 eth5 - port 4 eth6 - port 2 As follows attached file .. Not a big problem .. But it confused me a little time to configure the network of 'nodes' ... Had to use tcpdump (thankfully that was available) to find out which interface belonged to what port Switch for CDP: P 2014/1/17 Fabian Deutsch fabi...@redhat.com Hi Laercio, Am Freitag, den 17.01.2014, 14:49 -0200 schrieb Laercio Motta: I tested the ISO here. Thanks for being that brave! ;) - I was able to register with the engine and aprove (thing with 'oVirt-node-3.0.1-iso-1.0.2.vdsm.el6.iso' version was not possible) Great that this works now. - Firewall: Being duplicated the rule of vdsm port (54321). - 'Sanlock' is being blocked by 'selinux' (audit.log attached) Okay, those are probably bugs we need to take care of. - NIC was messy .. :P (eth0, eth4, eth5, eth6... ).. Could you explain this a bit more? Did all NICs appear, or did to many NICs appear? Thanks fabian 2014/1/17 Fabian Deutsch fabi...@redhat.com Hey, as many of you have noticed there wasn't any well working oVirt Node ISO around for oVirt 3.3. To get this ball rolling again I've put together a draft image of ALPHA quality. It contains many fixes some of us have been working on over the last weeks. - Source ISO - To not drown Jenkins in a hell-of-a-patch-queue I've pushed the patches to https://github.com/fabiand/ovirt-node/tree/teamsync The ISO built from that patchset can be found here: http://fedorapeople.org/~fabiand/node/3.0.4/ovirt-node-iso-3.0.3-0.999.201401170926draft.vdsm.el6.iso Please test this draft image and provide feedback on how it works for you. If you encounter problems - and you probably will - please take a look here on how to debug them: http://www.ovirt.org/Node_Troubleshooting - Important Notes - SELinux: Boot this alpha image with enforcing=0 to log potential denials, but not block the calls. To fix those denials permanently please attach your /var/log/audit/audit.log to a bug in bugzilla. Known problems: - Exception is raised after registration to Engine - Many bond devices are show on network page - Denials appear in /var/log/audit/audit.log And don't hesitate to reach out to us if you want to get more involved with Node. - fabian -- ╔══╗ ║▒▒▒ Laercio da Silva Motta ▒▒▒║ ║--║ ║ Blog: http://www.laerciomotta.com/ ║ ║ Twitter: http://twitter.com/#!/laerciomasala ║ ║ Skype: laerciomasala ║ ║ Chave PGP: http://bit.ly/kXS6ga ║ ╚═v1.0═╝ -- ╔══╗ ║▒▒▒ Laercio da Silva Motta ▒▒▒║ ║--║ ║* Blog: *http://www.laerciomotta.com/ ║ ║ *Twitter:* http://twitter.com/#!/laerciomasala ║ ║ *Skype*: laerciomasala ║ ║ Chave PGP: http://bit.ly/kXS6ga ║ ╚═v1.0═╝ 70-persistent-net.rules Description: Binary data ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Blank VM Install Console
I am not sure which install this is refering to. The only thing I did for this is to update my firefox to 24.2.0. - Original Message - From: Michal Skrivanek mskri...@redhat.com To: David Li david...@sbcglobal.net Cc: Michal Skrivanek michal.skriva...@redhat.com; users@ovirt.org List users@ovirt.org; Itamar Heim ih...@redhat.com Sent: Friday, January 17, 2014 2:41 PM Subject: Re: [Users] Blank VM Install Console On 17 Jan 2014, at 23:38, Itamar Heim ih...@redhat.com wrote: On 01/18/2014 12:30 AM, David Li wrote: This time I tried to use spice html5 browser client. I downloaded the cert from http://my-engine/ovirt-engine/ca.crt. This time the console window spice javascript client showed up in the firefox (24.2.0) but it stays gray. Nothing can be seen. So what else am I missing here? just to rule out things: - is the geust working correctly for you (ssh?) - does it happen to consume 100% cpu? - does vnc work for you correctly for this guest? During install, are you sure you said yes to install websocket proxy? Thanks, michal - Original Message - From: Michal Skrivanek michal.skriva...@redhat.com To: David Li david...@sbcglobal.net Cc: Meital Avital mavi...@redhat.com; Einav Cohen eco...@redhat.com; Omer Frenkel ofren...@redhat.com; users@ovirt.org List users@ovirt.org; d...@redhat.com Ron d...@redhat.com Sent: Friday, January 17, 2014 1:12 AM Subject: Re: [Users] Blank VM Install Console On Jan 17, 2014, at 09:59 , Dafna Ron d...@redhat.com wrote: well, I have to admit that it has been a while since I tried logging in to a vm console from a Windows OS :) Adding some people to this which I think can help more than me... On 01/17/2014 12:58 AM, David Li wrote: Well, it didn't even have any traces to tell me if it's installed. I am supposed to see these according to the instruction but none of them showed up. * IE will prompt you with This website wants to install the following add-on SpiceX.cab... proceed by clicking the arrow on the install button and choose Install for All Users of this computer. * Depending on the version of IE a UAC dialog may pop up asking you if you want to allow SpiceX.cab If it does not Click on the install spice button again and it will. * In the UAC dialog click on the yes button. * The install will now proceed in the background. I am using W7 64bit with IE11. My engine is running on a RHEL6 machine. IE11 doesn't really work as of now. Try some more reasonable browser, IE10 would be also fine. activex setup requires some manual work as mentione at How_to_Connect_to_SPICE_Console_With_Portal wiki native invocation (that file to download you got) is easier, just associate with recent remote viewer and it should open it works on Windows, Linux and OSX (needs https://github.com/brianwcook/launchvv in addition) check out http://www.ovirt.org/Console_Client_Resources Thanks, mcihal - Original Message - From: Dafna Ron d...@redhat.com To: David Li david...@sbcglobal.net Cc: Madhav V Diwan mdi...@diwanconsulting.com; users@ovirt.org users@ovirt.org Sent: Thursday, January 16, 2014 4:16 PM Subject: Re: [Users] Blank VM Install Console 1. did you restart you're firefox after install? 2. what OS are you using? On 01/16/2014 11:40 PM, David Li wrote: This isn't working for me at this time. I have gone to the end of the instructions and clicked on Install Spice button in IE but nothing happened. Maybe someone with more knowledge should come out and make clarifications. - Original Message - From: Madhav V Diwan mdi...@diwanconsulting.com To: David Li david...@sbcglobal.net Cc: users@ovirt.org users@ovirt.org Sent: Thursday, January 16, 2014 1:51 PM Subject: Re: [Users] Blank VM Install Console yuck i dont know why they do not just have this already done in an rpm yes it probably works , i have not tested it , but virt-viewer is deprecated in favor of the newer Remote-Viewer by the way worst comes to worst you can always connect to the ovirt vm node server via virt-manager gui in linux .. or using macports virt-manager in OSX and as long as you have a username and password set up in libvirt password db /etc/libvirt/passwd.db use saslpasswd2 -a libvirt $USER on your ovirt vm host node to add your user account so you dont mess with ovirt's if you have winaxe or some other Xwindows on your windows machine you could probably just ssh with putty.exe to your ovirt node server and run virt-manager from there while displaying back to your windows desktop -Original Message- From: David Li david...@sbcglobal.net
Re: [Users] Migration from NFS backed VM to iSCSI LUN without exporting them on the Ovirt Export Share
On 01/18/2014 12:57 AM, squadra wrote: On Fri, Jan 17, 2014 at 11:48 PM, Itamar Heim ih...@redhat.com mailto:ih...@redhat.com wrote: On 01/09/2014 10:16 AM, squadra wrote: Hello folks, since the nfs discussion remembered me that i got some vm left to migrate... here some kind of special question. i am open for non-bestpractice hacky solutions, too Situation is: - 2 Ovirt Cluster - Same DC - one NFS backed, one iSCSI backed - NFS Share and iSCSI Share are exported from the same phys. Machine - Bot DC use the same filer, just different Luns / Protocolls so, i thought about something simple like just move vm folder from a to b and do a little bit database voodoo? anyone did something like this yet? or is storage live migration already working for this? the docs didnt tell me very much about this. are the VMs thin or pre-allocated? with or without snapshots? mostly thin, but i wouldnt care about loosing the thin feature since the underlaying filer runs zfs with compression. and nop, no snaps through ovirt. you got some ugly hack suggestion for me? :D well, no voodo for nfs to iscsi. you can try and create the same VMs/disks (manually to check, then script with a different vm name (due to uniqueness) on the new DC. then try to dd the source disk to the target one. unless your storage can somehow do such mapping of LVs. 3.4 will hopefully allow to attach both nfs and iscsi domains to same DC, then you could try to move the VMs offline (or online) between the two. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Blank VM Install Console
On 01/18/2014 01:03 AM, David Li wrote: I am not sure which install this is refering to. The only thing I did for this is to update my firefox to 24.2.0. install of ovirt engine 3.3 - Original Message - From: Michal Skrivanek mskri...@redhat.com To: David Li david...@sbcglobal.net Cc: Michal Skrivanek michal.skriva...@redhat.com; users@ovirt.org List users@ovirt.org; Itamar Heim ih...@redhat.com Sent: Friday, January 17, 2014 2:41 PM Subject: Re: [Users] Blank VM Install Console On 17 Jan 2014, at 23:38, Itamar Heim ih...@redhat.com wrote: On 01/18/2014 12:30 AM, David Li wrote: This time I tried to use spice html5 browser client. I downloaded the cert from http://my-engine/ovirt-engine/ca.crt. This time the console window spice javascript client showed up in the firefox (24.2.0) but it stays gray. Nothing can be seen. So what else am I missing here? just to rule out things: - is the geust working correctly for you (ssh?) - does it happen to consume 100% cpu? - does vnc work for you correctly for this guest? During install, are you sure you said yes to install websocket proxy? Thanks, michal - Original Message - From: Michal Skrivanek michal.skriva...@redhat.com To: David Li david...@sbcglobal.net Cc: Meital Avital mavi...@redhat.com; Einav Cohen eco...@redhat.com; Omer Frenkel ofren...@redhat.com; users@ovirt.org List users@ovirt.org; d...@redhat.com Ron d...@redhat.com Sent: Friday, January 17, 2014 1:12 AM Subject: Re: [Users] Blank VM Install Console On Jan 17, 2014, at 09:59 , Dafna Ron d...@redhat.com wrote: well, I have to admit that it has been a while since I tried logging in to a vm console from a Windows OS :) Adding some people to this which I think can help more than me... On 01/17/2014 12:58 AM, David Li wrote: Well, it didn't even have any traces to tell me if it's installed. I am supposed to see these according to the instruction but none of them showed up. * IE will prompt you with This website wants to install the following add-on SpiceX.cab... proceed by clicking the arrow on the install button and choose Install for All Users of this computer. * Depending on the version of IE a UAC dialog may pop up asking you if you want to allow SpiceX.cab If it does not Click on the install spice button again and it will. * In the UAC dialog click on the yes button. * The install will now proceed in the background. I am using W7 64bit with IE11. My engine is running on a RHEL6 machine. IE11 doesn't really work as of now. Try some more reasonable browser, IE10 would be also fine. activex setup requires some manual work as mentione at How_to_Connect_to_SPICE_Console_With_Portal wiki native invocation (that file to download you got) is easier, just associate with recent remote viewer and it should open it works on Windows, Linux and OSX (needs https://github.com/brianwcook/launchvv in addition) check out http://www.ovirt.org/Console_Client_Resources Thanks, mcihal - Original Message - From: Dafna Ron d...@redhat.com To: David Li david...@sbcglobal.net Cc: Madhav V Diwan mdi...@diwanconsulting.com; users@ovirt.org users@ovirt.org Sent: Thursday, January 16, 2014 4:16 PM Subject: Re: [Users] Blank VM Install Console 1. did you restart you're firefox after install? 2. what OS are you using? On 01/16/2014 11:40 PM, David Li wrote: This isn't working for me at this time. I have gone to the end of the instructions and clicked on Install Spice button in IE but nothing happened. Maybe someone with more knowledge should come out and make clarifications. - Original Message - From: Madhav V Diwan mdi...@diwanconsulting.com To: David Li david...@sbcglobal.net Cc: users@ovirt.org users@ovirt.org Sent: Thursday, January 16, 2014 1:51 PM Subject: Re: [Users] Blank VM Install Console yuck i dont know why they do not just have this already done in an rpm yes it probably works , i have not tested it , but virt-viewer is deprecated in favor of the newer Remote-Viewer by the way worst comes to worst you can always connect to the ovirt vm node server via virt-manager gui in linux .. or using macports virt-manager in OSX and as long as you have a username and password set up in libvirt password db /etc/libvirt/passwd.db use saslpasswd2 -a libvirt $USER on your ovirt vm host node to add your user account so you dont mess with ovirt's if you have winaxe or some other Xwindows on your windows machine you could probably just ssh with putty.exe to your ovirt node server and run virt-manager from there while displaying back to your windows desktop -Original Message-
Re: [Users] vlan on mgmt network
I'm sorry. This seems to be getting too long from a possible confused user =) Yes, I followed the step and it works as expected. However I want to have VMs able to reach the mgmt network. let's make it simpler. eth0 - mgmt network, untagged, this is where I ssh to systems eth1 - some other subnet I have two nodes built and setup with ovirt. They run fine. ovirtmgmt runs on eth0 But I want to have a VM able reach to both - mgmt network on eth0 - vlanX on eth0 That's why I was testing different things I added eth0.X for VLAN X under the OS, but it won't show up under oVirt. I can add more physical interface to separate the traffic 1. subnet for ovirt 2. subnet for management traffic 3. subnet for whatever subnet VM reach out to W On Friday, January 17, 2014 5:27 PM, Itamar Heim ih...@redhat.com wrote: On 01/16/2014 08:35 PM, Assaf Muller wrote: Ok so if you want to set the management network (untagged) and VM networks (tagged) on the same bond, then the management network has to be non-VM. IE: You won't be able to connect instances to the management network. William - did this work for you followin assaf steps below? you don't need to change anything at host level, all should be done from the webadmin Assaf Muller, Cloud Networking Engineer Red Hat - Original Message - From: William Kwan pota...@yahoo.com To: Assaf Muller amul...@redhat.com Cc: users@ovirt.org, Christian Hernandez christi...@4over.com Sent: Thursday, January 16, 2014 7:59:46 PM Subject: Re: [Users] vlan on mgmt network Assaf, Thanks a lot. Will I be able to mix tagged and untagged traffic? Example: - bond0 on my two systems are on the management network, untagged - my VMs all have one connection to this management network - I want to setup a new VM with two interfaces, one on the management network, one on the tagged VLAN This will work it out? Thanks Will On Thursday, January 16, 2014 12:26 PM, Assaf Muller amul...@redhat.com wrote: You can make ovirtmgmt a non-VM, untagged (non-VLAN) network, then place as many VM, tagged networks as you'd like on the same NIC or bond. Here's a working upgrade procedure: 1) Edit ovirtmgmt, mark it as non-VM. 2) Go to all hosts using this network, select Setup Host Networks. You'll see that ovirtmgmt is out of sync. Edit the network and mark sync. Hit ok on the dialog of course :) Step 2 will be done for you automatically when you edit logical networks in oVirt 3.4 3) Create VM, VLAN networks 4) Go to all hosts you wish to place those networks, and drag the new VLAN networks on bond0. You don't need to do any prep work on your hosts before this procedure. oVirt will take care of this stuff for you. Assaf Muller, Cloud Networking Engineer Red Hat - Original Message - From: Christian Hernandez christi...@4over.com To: William Kwan pota...@yahoo.com Cc: users@ovirt.org Sent: Thursday, January 16, 2014 6:36:49 PM Subject: Re: [Users] vlan on mgmt network Assuming it's on the same VLAN... I would make the subinterface (i.e. bond0.1) Thank you, Christian Hernandez 1225 Los Angeles Street Glendale, CA 91204 Phone: 877-782-2737 ext. 4566 Fax: 818-265-3152 christi...@4over.com mailto: christi...@4over.com www.4over.com http://www.4over.com On Thu, Jan 16, 2014 at 8:31 AM, William Kwan pota...@yahoo.com wrote: Hi all, CentOS 6.5 and oVirt 3.3 Let's say I have bond0 (eth0 and eth1) on a management network. Logical network ovirtmgmt is set and working on top of Interfaces bond0. Is it possible to have another Logical network, e.g. ovirt777, on the same Interface bond0? Or I should add a virtual interface, e.g. bond0.1, tie it to VLAN 777 and create logical network with this virtual interface? Wil ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] vlan on mgmt network
On 01/18/2014 01:07 AM, William Kwan wrote: I'm sorry. This seems to be getting too long from a possible confused user =) Yes, I followed the step and it works as expected. However I want to have VMs able to reach the mgmt network. let's make it simpler. eth0 - mgmt network, untagged, this is where I ssh to systems eth1 - some other subnet I have two nodes built and setup with ovirt. They run fine. ovirtmgmt runs on eth0 But I want to have a VM able reach to both - mgmt network on eth0 - vlanX on eth0 That's why I was testing different things I added eth0.X for VLAN X under the OS, but it won't show up under oVirt. I can add more physical interface to separate the traffic 1. subnet for ovirt 2. subnet for management traffic 3. subnet for whatever subnet VM reach out to W this may sound weird, but why does the mgmt network has to be untagged? you could just have mgmt network in a vlan as well? On Friday, January 17, 2014 5:27 PM, Itamar Heim ih...@redhat.com wrote: On 01/16/2014 08:35 PM, Assaf Muller wrote: Ok so if you want to set the management network (untagged) and VM networks (tagged) on the same bond, then the management network has to be non-VM. IE: You won't be able to connect instances to the management network. William - did this work for you followin assaf steps below? you don't need to change anything at host level, all should be done from the webadmin Assaf Muller, Cloud Networking Engineer Red Hat - Original Message - From: William Kwan pota...@yahoo.com mailto:pota...@yahoo.com To: Assaf Muller amul...@redhat.com mailto:amul...@redhat.com Cc: users@ovirt.org mailto:users@ovirt.org, Christian Hernandez christi...@4over.com mailto:christi...@4over.com Sent: Thursday, January 16, 2014 7:59:46 PM Subject: Re: [Users] vlan on mgmt network Assaf, Thanks a lot. Will I be able to mix tagged and untagged traffic? Example: - bond0 on my two systems are on the management network, untagged - my VMs all have one connection to this management network - I want to setup a new VM with two interfaces, one on the management network, one on the tagged VLAN This will work it out? Thanks Will On Thursday, January 16, 2014 12:26 PM, Assaf Muller amul...@redhat.com mailto:amul...@redhat.com wrote: You can make ovirtmgmt a non-VM, untagged (non-VLAN) network, then place as many VM, tagged networks as you'd like on the same NIC or bond. Here's a working upgrade procedure: 1) Edit ovirtmgmt, mark it as non-VM. 2) Go to all hosts using this network, select Setup Host Networks. You'll see that ovirtmgmt is out of sync. Edit the network and mark sync. Hit ok on the dialog of course :) Step 2 will be done for you automatically when you edit logical networks in oVirt 3.4 3) Create VM, VLAN networks 4) Go to all hosts you wish to place those networks, and drag the new VLAN networks on bond0. You don't need to do any prep work on your hosts before this procedure. oVirt will take care of this stuff for you. Assaf Muller, Cloud Networking Engineer Red Hat - Original Message - From: Christian Hernandez christi...@4over.com mailto:christi...@4over.com To: William Kwan pota...@yahoo.com mailto:pota...@yahoo.com Cc: users@ovirt.org mailto:users@ovirt.org Sent: Thursday, January 16, 2014 6:36:49 PM Subject: Re: [Users] vlan on mgmt network Assuming it's on the same VLAN... I would make the subinterface (i.e. bond0.1) Thank you, Christian Hernandez 1225 Los Angeles Street Glendale, CA 91204 Phone: 877-782-2737 ext. 4566 Fax: 818-265-3152 christi...@4over.com mailto:christi...@4over.com mailto: christi...@4over.com mailto:christi...@4over.com www.4over.com http://www.4over.com http://www.4over.com/ On Thu, Jan 16, 2014 at 8:31 AM, William Kwan pota...@yahoo.com mailto:pota...@yahoo.com wrote: Hi all, CentOS 6.5 and oVirt 3.3 Let's say I have bond0 (eth0 and eth1) on a management network. Logical network ovirtmgmt is set and working on top of Interfaces bond0. Is it possible to have another Logical network, e.g. ovirt777, on the same Interface bond0? Or I should add a virtual interface, e.g. bond0.1, tie it to VLAN 777 and create logical network with this virtual interface? Wil ___ Users mailing list Users@ovirt.org mailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org mailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org mailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org
Re: [Users] Blank VM Install Console
This is my ovirt engine configuration: Configure WebSocket Proxy : True - Original Message - From: Itamar Heim ih...@redhat.com To: David Li david...@sbcglobal.net; Michal Skrivanek mskri...@redhat.com Cc: Michal Skrivanek michal.skriva...@redhat.com; users@ovirt.org List users@ovirt.org Sent: Friday, January 17, 2014 3:05 PM Subject: Re: [Users] Blank VM Install Console On 01/18/2014 01:03 AM, David Li wrote: I am not sure which install this is refering to. The only thing I did for this is to update my firefox to 24.2.0. install of ovirt engine 3.3 - Original Message - From: Michal Skrivanek mskri...@redhat.com To: David Li david...@sbcglobal.net Cc: Michal Skrivanek michal.skriva...@redhat.com; users@ovirt.org List users@ovirt.org; Itamar Heim ih...@redhat.com Sent: Friday, January 17, 2014 2:41 PM Subject: Re: [Users] Blank VM Install Console On 17 Jan 2014, at 23:38, Itamar Heim ih...@redhat.com wrote: On 01/18/2014 12:30 AM, David Li wrote: This time I tried to use spice html5 browser client. I downloaded the cert from http://my-engine/ovirt-engine/ca.crt. This time the console window spice javascript client showed up in the firefox (24.2.0) but it stays gray. Nothing can be seen. So what else am I missing here? just to rule out things: - is the geust working correctly for you (ssh?) - does it happen to consume 100% cpu? - does vnc work for you correctly for this guest? During install, are you sure you said yes to install websocket proxy? Thanks, michal - Original Message - From: Michal Skrivanek michal.skriva...@redhat.com To: David Li david...@sbcglobal.net Cc: Meital Avital mavi...@redhat.com; Einav Cohen eco...@redhat.com; Omer Frenkel ofren...@redhat.com; users@ovirt.org List users@ovirt.org; d...@redhat.com Ron d...@redhat.com Sent: Friday, January 17, 2014 1:12 AM Subject: Re: [Users] Blank VM Install Console On Jan 17, 2014, at 09:59 , Dafna Ron d...@redhat.com wrote: well, I have to admit that it has been a while since I tried logging in to a vm console from a Windows OS :) Adding some people to this which I think can help more than me... On 01/17/2014 12:58 AM, David Li wrote: Well, it didn't even have any traces to tell me if it's installed. I am supposed to see these according to the instruction but none of them showed up. * IE will prompt you with This website wants to install the following add-on SpiceX.cab... proceed by clicking the arrow on the install button and choose Install for All Users of this computer. * Depending on the version of IE a UAC dialog may pop up asking you if you want to allow SpiceX.cab If it does not Click on the install spice button again and it will. * In the UAC dialog click on the yes button. * The install will now proceed in the background. I am using W7 64bit with IE11. My engine is running on a RHEL6 machine. IE11 doesn't really work as of now. Try some more reasonable browser, IE10 would be also fine. activex setup requires some manual work as mentione at How_to_Connect_to_SPICE_Console_With_Portal wiki native invocation (that file to download you got) is easier, just associate with recent remote viewer and it should open it works on Windows, Linux and OSX (needs https://github.com/brianwcook/launchvv in addition) check out http://www.ovirt.org/Console_Client_Resources Thanks, mcihal - Original Message - From: Dafna Ron d...@redhat.com To: David Li david...@sbcglobal.net Cc: Madhav V Diwan mdi...@diwanconsulting.com; users@ovirt.org users@ovirt.org Sent: Thursday, January 16, 2014 4:16 PM Subject: Re: [Users] Blank VM Install Console 1. did you restart you're firefox after install? 2. what OS are you using? On 01/16/2014 11:40 PM, David Li wrote: This isn't working for me at this time. I have gone to the end of the instructions and clicked on Install Spice button in IE but nothing happened. Maybe someone with more knowledge should come out and make clarifications. - Original Message - From: Madhav V Diwan mdi...@diwanconsulting.com To: David Li david...@sbcglobal.net Cc: users@ovirt.org users@ovirt.org Sent: Thursday, January 16, 2014 1:51 PM Subject: Re: [Users] Blank VM Install Console yuck i dont know why they do not just have this already done in an rpm yes it probably works , i have not tested it , but virt-viewer is deprecated in favor of the newer Remote-Viewer by the way worst comes to worst you can always
Re: [Users] Host cannot access storage domains
On 01/03/2014 03:12 PM, Albl, Oliver wrote: Hi, I am starting with oVirt 3.3.2 and I have an issue adding a host to a cluster. I am using oVirt Engine Version 3.3.2-1.el6 There is a cluster with one host (installed with oVirt Node - 3.0.3 - 1.1.fc19 ISO image) up and running. I installed a second host using the same ISO image. I approved the host in the cluster. When I try to activate the second host, I receive the following messages in the events pane: State was set to Up for host host02. Host host02 reports about one of the Active Storage Domains as Problematic. Host host02 cannot access one of the Storage Domains attached to the Data Center Test303. Stetting Host state to Non-Operational. Failed to connect Host host02 to Storage Pool Test303 There are 3 FC Storage Domains configured and visible to both hosts. multipath –ll shows all LUNs on both hosts. The engine.log reports the following about every five minutes: 2014-01-03 13:50:15,408 ERROR [org.ovirt.engine.core.vdsbroker.irsbroker.IrsBrokerCommand] (pool-6-thread-44) Domain 7841a1c0-181a-4d43-9a25-b707accb5c4b: LUN_105 check timeot 69.7 is too big 2014-01-03 13:50:15,409 ERROR [org.ovirt.engine.core.vdsbroker.irsbroker.IrsBrokerCommand] (pool-6-thread-44) Domain 52cf84ce-6eda-4337-8c94-491d94f5a18d: LUN_103 check timeot 59.6 is too big 2014-01-03 13:50:15,410 ERROR [org.ovirt.engine.core.bll.InitVdsOnUpCommand] (pool-6-thread-44) Storage Domain LUN_105 of pool Test303 is in problem in host host02 2014-01-03 13:50:15,411 ERROR [org.ovirt.engine.core.bll.InitVdsOnUpCommand] (pool-6-thread-44) Storage Domain LUN_103 of pool Test030 is in problem in host host02 Please let me know if there are any log files I should attach. Thank you for your help! All the best, Oliver Albl ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users was this resolved? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] xfs options for gluster storage
Hi, I read a few of the past gluster presentations online, most of them seem to recommend similar to this: mkfs.xfs -i size=512 -n size=8192 -d su=256k,sw=10 /dev/mapper/vg_gluster-lv_gluster1 You then want to mount it as: /dev/mapper/vg_gluster-lv_gluster1 /data1 xfs allocsize=4096,inode64,logbufs=8,logbsize=256K,noatime1 2 I haven't tested this vs other scenarios though.. so you might want to give it a try first On Fri, Jan 17, 2014 at 6:53 PM, Alexandr shur...@shurik.kiev.ua wrote: Hi! I want to build small gluster storage with two nodes, 2x3Tb HDD in md-mirror on each. What parameters should I use in mkfs.xfs for optimal perfomance with ovirt? Should I use -s size=4k or something else? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] which version?
Hello, i have to create a new ovirt cluster with 3 node using gluster FS, which ovirt version do you suggest ? BTW: on ovirt.org it is not clear the actually status of version… stable, testing, beta etc… i suggest a more clear page with the indication of version status, link to release note and roadmap. thanks marco ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] New user to oVirt, and I haz a sad so far...
On 17-1-2014 8:53, Gabi C wrote: 've been there! :-D I mean exactly same issuse you had on Centos, I had on Fedora 19. Did you disable selinux on nodes? 'cause that's what is causing SSh connection closing My setup: 1 engine on vmware - fedora 19, up-to-date 2 nodes on IBM x series 3650 - fedora 19 based -oVirt Node - 3.0.3 - 1.1.fc19 with nodes beig in glusterfs cluster also. Right now, I'm banging my head against Operation Add-Disk failed to complete. , message I have got after adding a new virtual machine and try to addd its disk On Fri, Jan 17, 2014 at 6:08 AM, Will Dennis (Live.com) willardden...@live.com mailto:willardden...@live.com wrote: Hi all, ready for a story? (well, more of a rant, but hopefully it will be a good UX tale, and may even be entertaining.) Had one of the groups come to me at work this week and request a OpenStack setup. When I sat down and discussed their needs, it turns out that they really only need a multi-hypervisor setup where they can spin up VMs for their research projects. The VMs should be fairly long-lived, and will have persistent storage. Their other request is that the storage should be local on the hypervisor nodes (they plan to use Intel servers with 8-10 2TB drives for VM storage on each node.) They desire this in order to keep the VM I/O local - they do not have a SAN of any sort anyhow, and they do not care about live migration, etc @Will If the installation ends, either with or without error, it will give you a log location. Upload the log to a paste.bin and mail the link. @Gabi, There should be more info in either the vdsm.log on the SPM server or in the engine.log on the engine server, see above for lettings us know what the error is. Having installed oVirt, probably dozens of times, I have some guidelines: - temporarily disable firewalld/iptables (if all works, enable should still work, scripts with rules are generated and location is given) - make selinux permissive either via setenforce 0 (until next boot) or via /etc/selinux/config ( survives reboots), dont disable it! - make sure fqdn work in both directions between engine and host(s) (either using /etc/hosts or DNS) - make sure NetworkManager is disabled and network enabled Joop ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] which version?
Hi, well the latest stable release is 3.3.2 3.3.3 is still in beta and 3.4 is in alpha. HTH Am 17.01.2014 09:21, schrieb tristan...@libero.it: Hello, i have to create a new ovirt cluster with 3 node using gluster FS, which ovirt version do you suggest ? BTW: on ovirt.org it is not clear the actually status of version… stable, testing, beta etc… i suggest a more clear page with the indication of version status, link to release note and roadmap. thanks marco -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] [QE] oVirt 3.3.3 beta / RC status
Hi, oVirt 3.3.3 beta has been released and is actually on QA. We'll start composing oVirt 3.3.3 RC on 2014-01-21 12:00 UTC. The bug tracker [1] shows no bugs blocking the release The following is a list of the non-blocking bugs still open with target 3.3 - 3.3.3: Whiteboard Bug ID Summary integration 902979 ovirt-live - firefox doesn't trust the installed engine integration 1021805 [RFE] oVirt Live - use motd to show the admin password integration 1022440 [RFE] AIO - configure the AIO host to be a gluster cluster/host integration 1026930 Package virtio-win and put it in ovirt repositories integration 1026933 pre-populate ISO domain with virtio-win ISO integration 1050084 Tracker: oVirt 3.3.3 release network 997197 Some AppErrors messages are grammatically incorrect (singular vs plural) node906257 USB Flash Drive install of ovirt-node created via dd fails node923049 ovirt-node fails to boot from local disk under UEFI mode node965583 [RFE] add shortcut key on TUI node976675 [wiki] Update contribution page node979350 Changes admin password in the first time when log in is failed while finished auto-install node979390 [RFE] Split defaults.py into smaller pieces node982232 performance page takes 1sec to load (on first load) node984441 kdump page crashed before configuring the network after ovirt-node intalled node986285 UI crashes when no bond name is given node991267 [RFE] Add TUI information to log file. node1018374 ovirt-node-iso-3.0.1-1.0.2.vdsm.fc19: Failed on Auto-install node1018710 [RFE] Enhance API documentation node1032035 [RFE]re-write auto install function for the cim plugin node1033286 ovirt-node-plugin-vdsm can not be added to ovirt node el6 base image storage 987917 [oVirt] [glance] API version not specified in provider dialog virt1007940 Cannot clone from snapshot while using GlusterFS as POSIX Storage Domain Maintainers: - We'll start composing oVirt 3.3.3 RC on 2014-01-21 12:00 UTC: all non blockers bug still open after the build will be moved to 3.3.4. - Please add the bugs to the tracker if you think that 3.3.3 should not be released without them fixed. - Please provide ETA on bugs you add as blockers - Please re-target all bugs you don't think that should block 3.3.3. - Please fill release notes, the page has been created here [3] - Please remember to rebuild your packages before 2014-01-21 12:00 UTC if you want them to be included in 3.3.3 RC. For those who want to help testing the bugs, I suggest to add yourself as QA contact for the bug and add yourself to the testing page [2]. Thanks to Gianluca Cecchi for his testing of oVirt 3.3.3 beta on Gluster storage! [1] http://bugzilla.redhat.com/1050084 [2] http://www.ovirt.org/Testing/Ovirt_3.3.3_testing [3] http://www.ovirt.org/OVirt_3.3.3_release_notes Thanks, -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] Searching for VMs with snapshots
Hi All, I would like to see, in the webui, all VMs that have snapshots attached to them but I'm not able to construct a search that will work. For one thing there is no 'Snapshot' category so I think that it will be impossible. The use case is that I would like to have a way to see, in the webui, which VMs are running stateless, accidents happen :-( . Joop ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Blank VM Install Console
well, I have to admit that it has been a while since I tried logging in to a vm console from a Windows OS :) Adding some people to this which I think can help more than me... On 01/17/2014 12:58 AM, David Li wrote: Well, it didn't even have any traces to tell me if it's installed. I am supposed to see these according to the instruction but none of them showed up. * IE will prompt you with This website wants to install the following add-on SpiceX.cab... proceed by clicking the arrow on the install button and choose Install for All Users of this computer. * Depending on the version of IE a UAC dialog may pop up asking you if you want to allow SpiceX.cab If it does not Click on the install spice button again and it will. * In the UAC dialog click on the yes button. * The install will now proceed in the background. I am using W7 64bit with IE11. My engine is running on a RHEL6 machine. - Original Message - From: Dafna Ron d...@redhat.com To: David Li david...@sbcglobal.net Cc: Madhav V Diwan mdi...@diwanconsulting.com; users@ovirt.org users@ovirt.org Sent: Thursday, January 16, 2014 4:16 PM Subject: Re: [Users] Blank VM Install Console 1. did you restart you're firefox after install? 2. what OS are you using? On 01/16/2014 11:40 PM, David Li wrote: This isn't working for me at this time. I have gone to the end of the instructions and clicked on Install Spice button in IE but nothing happened. Maybe someone with more knowledge should come out and make clarifications. - Original Message - From: Madhav V Diwan mdi...@diwanconsulting.com To: David Li david...@sbcglobal.net Cc: users@ovirt.org users@ovirt.org Sent: Thursday, January 16, 2014 1:51 PM Subject: Re: [Users] Blank VM Install Console yuck i dont know why they do not just have this already done in an rpm yes it probably works , i have not tested it , but virt-viewer is deprecated in favor of the newer Remote-Viewer by the way worst comes to worst you can always connect to the ovirt vm node server via virt-manager gui in linux .. or using macports virt-manager in OSX and as long as you have a username and password set up in libvirt password db /etc/libvirt/passwd.db use saslpasswd2 -a libvirt $USER on your ovirt vm host node to add your user account so you dont mess with ovirt's if you have winaxe or some other Xwindows on your windows machine you could probably just ssh with putty.exe to your ovirt node server and run virt-manager from there while displaying back to your windows desktop -Original Message- From: David Li david...@sbcglobal.net Reply-to: David Li david...@sbcglobal.net To: Madhav V Diwan mdi...@diwanconsulting.com Cc: users@ovirt.org users@ovirt.org Subject: Re: [Users] Blank VM Install Console Date: Thu, 16 Jan 2014 13:35:02 -0800 (PST) Is this page still applicable to ovirt 3.3.2? http://wiki.ovirt.org/How_to_Connect_to_SPICE_Console_With_Portal#Add_a_deployment_method_Server_Side - Original Message - From: Madhav V Diwan mdi...@diwanconsulting.com To: David Li david...@sbcglobal.net Cc: users@ovirt.org users@ovirt.org Sent: Thursday, January 16, 2014 1:28 PM Subject: Re: [Users] Blank VM Install Console install them wherever your firefox browser is installed... whichever machine you are using to browse to the portal from unfortunately i believe ovirts' spice viewing only works on linux desktops running firefox currently also the ovirt vnc implementation assumes you have remote-viewer which can open that .vv file that pops up.. again remote-viewer would only be available on linux desktops.. there IS a MAC OS port for remote-viewer , but i've never gotten it to work without a lot of manual URL input -Original Message- From: David Li david...@sbcglobal.net Reply-to: David Li david...@sbcglobal.net To: Madhav V Diwan mdi...@diwanconsulting.com Cc: users@ovirt.org users@ovirt.org Subject: Re: [Users] Blank VM Install Console Date: Thu, 16 Jan 2014 11:39:20 -0800 (PST) Do I need these to be installed on the engine or on the machine where the webadmin portal browser is being run? Are there any ovirt links describing these? david - Original Message - From: Madhav V Diwan mdi...@diwanconsulting.com To: David Li david...@sbcglobal.net Cc: users@ovirt.org users@ovirt.org Sent: Thursday, January 16, 2014 10:35 AM Subject: Re: [Users] Black VM Install Console you ve probabaly not install teh spice xpi in your firefox on linux when you opened the console , or maybe the remote-viewer application is missing use yum to install these -Original Message-R eply-to: David Li david...@sbcglobal.net Subject: [Users] Black VM Install Console Date: Thu,
Re: [Users] Blank VM Install Console
On Jan 17, 2014, at 09:59 , Dafna Ron d...@redhat.com wrote: well, I have to admit that it has been a while since I tried logging in to a vm console from a Windows OS :) Adding some people to this which I think can help more than me... On 01/17/2014 12:58 AM, David Li wrote: Well, it didn't even have any traces to tell me if it's installed. I am supposed to see these according to the instruction but none of them showed up. * IE will prompt you with This website wants to install the following add-on SpiceX.cab... proceed by clicking the arrow on the install button and choose Install for All Users of this computer. * Depending on the version of IE a UAC dialog may pop up asking you if you want to allow SpiceX.cab If it does not Click on the install spice button again and it will. * In the UAC dialog click on the yes button. * The install will now proceed in the background. I am using W7 64bit with IE11. My engine is running on a RHEL6 machine. IE11 doesn't really work as of now. Try some more reasonable browser, IE10 would be also fine. activex setup requires some manual work as mentione at How_to_Connect_to_SPICE_Console_With_Portal wiki native invocation (that file to download you got) is easier, just associate with recent remote viewer and it should open it works on Windows, Linux and OSX (needs https://github.com/brianwcook/launchvv in addition) check out http://www.ovirt.org/Console_Client_Resources Thanks, mcihal - Original Message - From: Dafna Ron d...@redhat.com To: David Li david...@sbcglobal.net Cc: Madhav V Diwan mdi...@diwanconsulting.com; users@ovirt.org users@ovirt.org Sent: Thursday, January 16, 2014 4:16 PM Subject: Re: [Users] Blank VM Install Console 1. did you restart you're firefox after install? 2. what OS are you using? On 01/16/2014 11:40 PM, David Li wrote: This isn't working for me at this time. I have gone to the end of the instructions and clicked on Install Spice button in IE but nothing happened. Maybe someone with more knowledge should come out and make clarifications. - Original Message - From: Madhav V Diwan mdi...@diwanconsulting.com To: David Li david...@sbcglobal.net Cc: users@ovirt.org users@ovirt.org Sent: Thursday, January 16, 2014 1:51 PM Subject: Re: [Users] Blank VM Install Console yuck i dont know why they do not just have this already done in an rpm yes it probably works , i have not tested it , but virt-viewer is deprecated in favor of the newer Remote-Viewer by the way worst comes to worst you can always connect to the ovirt vm node server via virt-manager gui in linux .. or using macports virt-manager in OSX and as long as you have a username and password set up in libvirt password db /etc/libvirt/passwd.db use saslpasswd2 -a libvirt $USER on your ovirt vm host node to add your user account so you dont mess with ovirt's if you have winaxe or some other Xwindows on your windows machine you could probably just ssh with putty.exe to your ovirt node server and run virt-manager from there while displaying back to your windows desktop -Original Message- From: David Li david...@sbcglobal.net Reply-to: David Li david...@sbcglobal.net To: Madhav V Diwan mdi...@diwanconsulting.com Cc: users@ovirt.org users@ovirt.org Subject: Re: [Users] Blank VM Install Console Date: Thu, 16 Jan 2014 13:35:02 -0800 (PST) Is this page still applicable to ovirt 3.3.2? http://wiki.ovirt.org/How_to_Connect_to_SPICE_Console_With_Portal#Add_a_deployment_method_Server_Side - Original Message - From: Madhav V Diwan mdi...@diwanconsulting.com To: David Li david...@sbcglobal.net Cc: users@ovirt.org users@ovirt.org Sent: Thursday, January 16, 2014 1:28 PM Subject: Re: [Users] Blank VM Install Console install them wherever your firefox browser is installed... whichever machine you are using to browse to the portal from unfortunately i believe ovirts' spice viewing only works on linux desktops running firefox currently also the ovirt vnc implementation assumes you have remote-viewer which can open that .vv file that pops up.. again remote-viewer would only be available on linux desktops.. there IS a MAC OS port for remote-viewer , but i've never gotten it to work without a lot of manual URL input -Original Message- From: David Li david...@sbcglobal.net Reply-to: David Li david...@sbcglobal.net To: Madhav V Diwan mdi...@diwanconsulting.com Cc: users@ovirt.org users@ovirt.org Subject: Re: [Users] Blank VM Install Console Date: Thu, 16 Jan 2014 11:39:20 -0800 (PST) Do I need these to be installed on the engine or on the machine where the webadmin portal browser is being run? Are there any ovirt links describing these? david -
Re: [Users] Blank VM Install Console
On 17-1-2014 1:58, David Li wrote: Well, it didn't even have any traces to tell me if it's installed. I am supposed to see these according to the instruction but none of them showed up. * IE will prompt you with This website wants to install the following add-on SpiceX.cab... proceed by clicking the arrow on the install button and choose Install for All Users of this computer. * Depending on the version of IE a UAC dialog may pop up asking you if you want to allow SpiceX.cab If it does not Click on the install spice button again and it will. * In the UAC dialog click on the yes button. * The install will now proceed in the background. I am using W7 64bit with IE11. My engine is running on a RHEL6 machine. Assuming you're using oVirt-3.3.2 which provides .vv files you need to install remote-viewer. Download and install https://fedorahosted.org/released/virt-viewer/virt-viewer-x64-0.5.6.msi and when you're asked what todo with the .vv file browse to where you have virt-viewer installed and choose remote-viewer as the handler of .vv files. It will handle spice and vnc console. Joop ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] [QE] oVirt 3.4.0 alpha / beta status
Hi, oVirt 3.4.0 alpha has been released and is actually on QA. An issue has been found in VDSM so we have updated the packages in alpha repositories for Fedora. We had an issue with nightly build for EL6 packages yesterday so EL6 repository is not yet updated. We'll try to sync it today, I'm sorry for the inconvenient. We'll start composing oVirt 3.4.0 beta on 2014-01-20 14:00 UTC from 3.4 branches. The bug tracker [1] shows the following bugs blocking the release: Whiteboard Bug ID Summary gluster 1038988 Gluster brick sync does not work when host has multiple interfaces integration 1054080 gracefully warn about unsupported upgrade from legacy releases network 1054195 [NetworkLabels] Attaching two labeled networks to a cluster result in failure of the latter There are still 280 bugs [2] targeted to 3.4.0. Excluding node and documentation bugs we still have 237 bugs [3] targeted to 3.4.0. Please review them as soon as possible. Maintainers: - Please remember to rebuild your packages before 2014-01-21 12:00 UTC if you want them to be included in 3.4.0 beta. - Please add the bugs to the tracker if you think that 3.4.0 should not be released without them fixed. - Please provide ETA on blockers bugs - Please update the target to 3.4.1 or any next release for bugs that won't be in 3.4.0: it will ease gathering the blocking bugs for next releases. - Please fill release notes, the page has been created here [4] - Please update http://www.ovirt.org/OVirt_3.4_TestDay before 2014-01-23 For those who want to help testing the bugs, I suggest to add yourself as QA contact for the bug. Please also be prepared for upcoming oVirt 3.4.0 Test Day on 2014-01-23! Thanks to all people already testing 3.4.0 alpha! [1] https://bugzilla.redhat.com/1024889 [2] http://red.ht/1eIRZXM [3] http://red.ht/1auBU3r [4] http://www.ovirt.org/OVirt_3.4.0_release_notes -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] iSCSI storage domain.
Indeed, Using ovirt-engine APIs you can edit your iSCSI storage domain and extend it by adding physical volumes from your shared storage (The process is managed by ovirt-engine, the actual actions on your storage are done by your host which has VDSM installed on). - Original Message - From: Hans Emmanuel hansemman...@gmail.com To: Elad Ben Aharon ebena...@redhat.com Cc: users@ovirt.org Sent: Friday, January 17, 2014 6:37:56 AM Subject: Re: [Users] iSCSI storage domain. Thanks for the reply . Are you suggesting to use Ovirt Engine to resize iSCSI storage domain ? On Thu, Jan 16, 2014 at 7:11 PM, Elad Ben Aharon ebena...@redhat.comwrote: Hi, Both storage types are suitable for production setup. As for your second question - manually LVM resizing is not recommended, why not using RHEVM for that? - Original Message - From: Hans Emmanuel hansemman...@gmail.com To: users@ovirt.org Sent: Thursday, January 16, 2014 3:30:39 PM Subject: Re: [Users] iSCSI storage domain. Could any one please give valuable suggestions? On 16-Jan-2014 12:28 PM, Hans Emmanuel hansemman...@gmail.com wrote: Hi all, I would like to get some comparison on NFS iSCSI storage domain . Which one more suitable for a production setup ? I am planning to use LVM backed DRBD replication . And also is that possible to expand iSCSI storage domain by simply resizing backend LVM ? -- Hans Emmanuel NOthing to FEAR but something to FEEL.. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- *Hans Emmanuel* *NOthing to FEAR but something to FEEL..* ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] iSCSI storage domain.
Thanks Elad for explaining . On Fri, Jan 17, 2014 at 2:55 PM, Elad Ben Aharon ebena...@redhat.comwrote: Indeed, Using ovirt-engine APIs you can edit your iSCSI storage domain and extend it by adding physical volumes from your shared storage (The process is managed by ovirt-engine, the actual actions on your storage are done by your host which has VDSM installed on). - Original Message - From: Hans Emmanuel hansemman...@gmail.com To: Elad Ben Aharon ebena...@redhat.com Cc: users@ovirt.org Sent: Friday, January 17, 2014 6:37:56 AM Subject: Re: [Users] iSCSI storage domain. Thanks for the reply . Are you suggesting to use Ovirt Engine to resize iSCSI storage domain ? On Thu, Jan 16, 2014 at 7:11 PM, Elad Ben Aharon ebena...@redhat.com wrote: Hi, Both storage types are suitable for production setup. As for your second question - manually LVM resizing is not recommended, why not using RHEVM for that? - Original Message - From: Hans Emmanuel hansemman...@gmail.com To: users@ovirt.org Sent: Thursday, January 16, 2014 3:30:39 PM Subject: Re: [Users] iSCSI storage domain. Could any one please give valuable suggestions? On 16-Jan-2014 12:28 PM, Hans Emmanuel hansemman...@gmail.com wrote: Hi all, I would like to get some comparison on NFS iSCSI storage domain . Which one more suitable for a production setup ? I am planning to use LVM backed DRBD replication . And also is that possible to expand iSCSI storage domain by simply resizing backend LVM ? -- Hans Emmanuel NOthing to FEAR but something to FEEL.. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- *Hans Emmanuel* *NOthing to FEAR but something to FEEL..* -- *Hans Emmanuel* *NOthing to FEAR but something to FEEL..* ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] iSCSI storage domain.
On Fri, Jan 17, 2014 at 10:25 AM, Elad Ben Aharon wrote: Indeed, Using ovirt-engine APIs you can edit your iSCSI storage domain and extend it by adding physical volumes from your shared storage (The process is managed by ovirt-engine, the actual actions on your storage are done by your host which has VDSM installed on). - Original Message - From: Hans Emmanuel hansemman...@gmail.com To: Elad Ben Aharon ebena...@redhat.com Cc: users@ovirt.org Sent: Friday, January 17, 2014 6:37:56 AM Subject: Re: [Users] iSCSI storage domain. Thanks for the reply . Are you suggesting to use Ovirt Engine to resize iSCSI storage domain ? On Thu, Jan 16, 2014 at 7:11 PM, Elad Ben Aharon ebena...@redhat.comwrote: Hi, Both storage types are suitable for production setup. As for your second question - manually LVM resizing is not recommended, why not using RHEVM for that? - Original Message - From: Hans Emmanuel hansemman...@gmail.com To: users@ovirt.org Sent: Thursday, January 16, 2014 3:30:39 PM Subject: Re: [Users] iSCSI storage domain. Could any one please give valuable suggestions? On 16-Jan-2014 12:28 PM, Hans Emmanuel hansemman...@gmail.com wrote: Hi all, I would like to get some comparison on NFS iSCSI storage domain . Which one more suitable for a production setup ? I am planning to use LVM backed DRBD replication . And also is that possible to expand iSCSI storage domain by simply resizing backend LVM ? -- Hans Emmanuel I think one option should be to provide the user, if not already present/tested/supported, the opportunity to resize the LUN on storage array and then run a rescan from oVIrt to see the new size and use it without disruption of service. To avoid also LUNs proliferation on storage arrays that in general are providing storage to many sources, also different from oVirt itself Gianluca ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] [QE] oVirt 3.4.0 alpha / beta status
Cheers, Andrew From: Sandro Bonazzola Sent: Friday, January 17, 2014 8:16 PM To: arch, engine-devel, VDSM Project Development, users Hi, oVirt 3.4.0 alpha has been released and is actually on QA. An issue has been found in VDSM so we have updated the packages in alpha repositories for Fedora. We had an issue with nightly build for EL6 packages yesterday so EL6 repository is not yet updated. We'll try to sync it today, I'm sorry for the inconvenient. We'll start composing oVirt 3.4.0 beta on 2014-01-20 14:00 UTC from 3.4 branches. The bug tracker [1] shows the following bugs blocking the release: Whiteboard Bug ID Summary gluster 1038988 Gluster brick sync does not work when host has multiple interfaces integration 1054080 gracefully warn about unsupported upgrade from legacy releases network 1054195 [NetworkLabels] Attaching two labeled networks to a cluster result in failure of the latter There are still 280 bugs [2] targeted to 3.4.0. Excluding node and documentation bugs we still have 237 bugs [3] targeted to 3.4.0. Please review them as soon as possible. Maintainers: - Please remember to rebuild your packages before 2014-01-21 12:00 UTC if you want them to be included in 3.4.0 beta. - Please add the bugs to the tracker if you think that 3.4.0 should not be released without them fixed. - Please provide ETA on blockers bugs - Please update the target to 3.4.1 or any next release for bugs that won't be in 3.4.0: it will ease gathering the blocking bugs for next releases. - Please fill release notes, the page has been created here [4] - Please update http://www.ovirt.org/OVirt_3.4_TestDay before 2014-01-23 For those who want to help testing the bugs, I suggest to add yourself as QA contact for the bug. Please also be prepared for upcoming oVirt 3.4.0 Test Day on 2014-01-23! Thanks to all people already testing 3.4.0 alpha! [1] https://bugzilla.redhat.com/1024889 [2] http://red.ht/1eIRZXM [3] http://red.ht/1auBU3r [4] http://www.ovirt.org/OVirt_3.4.0_release_notes -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Gluster storage
On Fri, Jan 17, 2014 at 08:25:05AM +0100, Gianluca Cecchi wrote: On Fri, Nov 29, 2013 at 11:48 AM, Dan Kenigsberg wrote: On Fri, Nov 29, 2013 at 04:04:03PM +0530, Vijay Bellur wrote: There are two ways in which GlusterFS can be used as a storage domain: a) Use gluster native/fuse access with POSIXFS b) Use the gluster native storage domain to bypass fuse (with libgfapi). We are currently addressing an issue in libvirt (https://bugzilla.redhat.com/show_bug.cgi?id=1017289) to enable snapshot support with libgfapi. Once this is addressed, we will have libgfapi support in the native storage domain. It won't be as immediate, since there's a required fix on Vdsm's side (Bug 1022961 - Running a VM from a gluster domain uses mount instead of gluster URI) Till then, fuse would be used with native storage domain. You can find more details about native storage domain here: http://www.ovirt.org/Features/GlusterFS_Storage_Domain rg/mailman/listinfo/users Hello, revamping here I'm using oVirt 3.3.3 beta1 after upgrade from 3.3.2 on fedora 19 ovirt beta repo It seems bug referred by Vijay (1017289) is still marked as assigned, but actually it is for rhel 6. Bug referred by Dan (1022961) is marked as blocked but I don't see any particular updates since late november. But it is for rhevm, so I think it is for rhel 6... So what is the situation for fedora 19 and oVirt in upcoming 3.3.3? And upcoming fedora 19/20 and 3.4? Neither bug has been fixed as of yet, I'm afraid. You should seem them change state to POST when there's code to be seen. Dan. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] iSCSI storage domain.
On Fri, Jan 17, 2014 at 10:32 AM, Gianluca Cecchi wrote: I think one option should be to provide the user, if not already present/tested/supported, the opportunity to resize the LUN on storage array and then run a rescan from oVIrt to see the new size and use it without disruption of service. To avoid also LUNs proliferation on storage arrays that in general are providing storage to many sources, also different from oVirt itself Gianluca So something like this for vSphere: http://kb.vmware.com/selfservice/microsites/search.do?language=en_UScmd=displayKCexternalId=1017662 Gianluca ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] connecting to oVirt/RHEV VMs through proxy and the oVirt API
On 01/17/2014 12:30 AM, i iordanov wrote: Hello, My apologies for cross-posting, but this discussion concerns both mailing lists, I think. In Opaque, I recently started setting the proxy property of SpiceSession from a console file, as is done in remote-viewer, in order to support installations where the nodes are not visible from the point of view of the client. However, then I remembered that I have not seen the proxy property being available through the oVirt/RHEV API. I looked at the latest remote-viewer code, and I looked through the oVirt/RHEV API documentation, and indeed, I see no way to get proxy information other than through the console.vv file. If I am correct, then this means that both Opaque and remote-viewer cannot connect to VMs behind a proxy unless a console.vv file is used, which also means that since console.vv files are unobtainable through the User Portal on mobile devices, mobile devices effectively cannot at all connect to such VMs if the user is not an Administrator. Would it be possible to expose the proxy parameter through the API? I couldn't find a bug opened about this, but it doesn't mean it isn't there :). Thanks! iordan You are right. Obtaining the global proxy setting is currently impossible in the API. There is no bug requesting it, as far as I know. Can you open a new one? -- Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta 3ºD, 28016 Madrid, Spain Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Gluster storage
On 01/17/2014 12:55 PM, Gianluca Cecchi wrote: On Fri, Nov 29, 2013 at 11:48 AM, Dan Kenigsberg wrote: On Fri, Nov 29, 2013 at 04:04:03PM +0530, Vijay Bellur wrote: There are two ways in which GlusterFS can be used as a storage domain: a) Use gluster native/fuse access with POSIXFS b) Use the gluster native storage domain to bypass fuse (with libgfapi). We are currently addressing an issue in libvirt (https://bugzilla.redhat.com/show_bug.cgi?id=1017289) to enable snapshot support with libgfapi. Once this is addressed, we will have libgfapi support in the native storage domain. It won't be as immediate, since there's a required fix on Vdsm's side (Bug 1022961 - Running a VM from a gluster domain uses mount instead of gluster URI) Till then, fuse would be used with native storage domain. You can find more details about native storage domain here: http://www.ovirt.org/Features/GlusterFS_Storage_Domain rg/mailman/listinfo/users Hello, revamping here I'm using oVirt 3.3.3 beta1 after upgrade from 3.3.2 on fedora 19 ovirt beta repo It seems bug referred by Vijay (1017289) is still marked as assigned, but actually it is for rhel 6. Bug referred by Dan (1022961) is marked as blocked but I don't see any particular updates since late november. But it is for rhevm, so I think it is for rhel 6... So what is the situation for fedora 19 and oVirt in upcoming 3.3.3? And upcoming fedora 19/20 and 3.4? I ask because I see that in my qemu command line generated by oVirt there is: for virtio (virtio-blk) disk -drive file=/rhev/data-center/mnt/glusterSD/node01.mydomain:gvdata/d0b96d4a-62aa-4e9f-b50e-f7a0cb5be291/images/a5e4f67b-50b5-4740-9990-39deb8812445/53408cb0-bcd4-40de-bc69-89d59b7b5bc2,if=none,id=drive-virtio-disk0,format=raw,serial=a5e4f67b-50b5-4740-9990-39deb8812445,cache=none,werror=stop,rerror=stop,aio=threads for virtio-scsi disk -drive file=/rhev/data-center/mnt/glusterSD/node01.mydomain:gvdata/d0b96d4a-62aa-4e9f-b50e-f7a0cb5be291/images/c1477133-6b06-480d-a233-1dae08daf8b3/c2a82c64-9dee-42bb-acf2-65b8081f2edf,if=none,id=drive-scsi0-0-0-0,format=raw,serial=c1477133-6b06-480d-a233-1dae08daf8b3,cache=none,werror=stop,rerror=stop,aio=threads So it is referred as mount point and not gluster:// way Also, the output of mount command on hypervisors shows: node01.mydomain:gvdata on /rhev/data-center/mnt/glusterSD/node01.mydomain:gvdata type fuse.glusterfs (rw,relatime,user_id=0,group_id=0,default_permissions,allow_other,max_read=131072) fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime) and it seems indeed fuse mount, so not using libgfapi... output of lsof -Pp pid where pid is the qemu process shows libgfapi: qemu-syst 2057 qemu mem REG 253,0 99440 541417 /usr/lib64/libgfapi.so.0.0.0 (btw: strange version 0.0.0 for a release.. not so reassuring ;-) libgfapi uses a different internal versioning scheme and hence compatibility can be handled. However there is work happening in glusterfs upstream to change the version scheme for libraries and have it compatible with libtool guidelines. # ll /usr/lib64/libgfapi.so.0* lrwxrwxrwx. 1 root root17 Jan 7 12:45 /usr/lib64/libgfapi.so.0 - libgfapi.so.0.0.0 -rwxr-xr-x. 1 root root 99440 Jan 3 13:35 /usr/lib64/libgfapi.so.0.0.0 ) At page http://www.gluster.org/category/qemu/ there is a schema about mount types and benchmarks 1) FUSE mount 2) GlusterFS block driver in QEMU (FUSE bypass) 3) Base (VM image accessed directly from brick) ( qemu-system-x86_64 –enable-kvm –nographic -smp 4 -m 2048 -drive file=/test/F17,if=virtio,cache=none = /test is brick directory ) I have not understood if we are in Base (best performance) or FUSE (worst performance) In this particular blog post, base refers to local disk storage and the FUSE performance was measured before a set of optimizations were done in GlusterFS. The Optimize for Virt action in oVirt ensures that these optimizations are enabled. Hence, even with FUSE the performance for VM image storage would be somewhere between the worst and best cases. thanks in advance for clarifications and possible roadmaps... If you are interested in seeing any new feature related to the oVirt-Gluster integration, please feel free to let us know as part of the GlusterFS 3.6 planning process [1] which is ongoing now. - Vijay [1] http://www.gluster.org/community/documentation/index.php/Planning36 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] New user to oVirt, and I haz a sad so far...
Hi Joop, 1. I did disabled firewalld/iptbles on both nodes and engines. 2. Disabling selinux: when setting to permissive via /etc/selinux/config (and of course unpersist/persist them - /config/etc) doesn't work ( as write this I've just reboot one node with the above modification and when I try to ssh node I get connection closed by... - of course selinux is enabled; after setenforce 0 ssh is OK.The only way I manage to diasble selinux was mount -o.rw,remount /run/initramfs/live edit grub.cfg and add selinux=0 to kernel line 3. one strange issue: after I reboot nodes, trying to ssh raise ssh warning WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! so I have to remove host entry from .ssh/.known_host in order to connect 4. I am about to check name resolution 5.I have glusterfs also on both nodes. After I put nodes on maintenace, stop gluster volumes and rebooting nodes caused gluster volumes to dissapear from engine web interface Thanks On Fri, Jan 17, 2014 at 10:35 AM, noc n...@nieuwland.nl wrote: On 17-1-2014 8:53, Gabi C wrote: 've been there! :-D I mean exactly same issuse you had on Centos, I had on Fedora 19. Did you disable selinux on nodes? 'cause that's what is causing SSh connection closing My setup: 1 engine on vmware - fedora 19, up-to-date 2 nodes on IBM x series 3650 - fedora 19 based -oVirt Node - 3.0.3 - 1.1.fc19 with nodes beig in glusterfs cluster also. Right now, I'm banging my head against Operation Add-Disk failed to complete. , message I have got after adding a new virtual machine and try to addd its disk On Fri, Jan 17, 2014 at 6:08 AM, Will Dennis (Live.com) willardden...@live.com wrote: Hi all, ready for a story? (well, more of a rant, but hopefully it will be a good UX tale, and may even be entertaining.) Had one of the groups come to me at work this week and request a OpenStack setup. When I sat down and discussed their needs, it turns out that they really only need a multi-hypervisor setup where they can spin up VMs for their research projects. The VMs should be fairly long-lived, and will have persistent storage. Their other request is that the storage should be local on the hypervisor nodes (they plan to use Intel servers with 8-10 2TB drives for VM storage on each node.) They desire this in order to keep the VM I/O local - they do not have a SAN of any sort anyhow, and they do not care about live migration, etc @Will If the installation ends, either with or without error, it will give you a log location. Upload the log to a paste.bin and mail the link. @Gabi, There should be more info in either the vdsm.log on the SPM server or in the engine.log on the engine server, see above for lettings us know what the error is. Having installed oVirt, probably dozens of times, I have some guidelines: - temporarily disable firewalld/iptables (if all works, enable should still work, scripts with rules are generated and location is given) - make selinux permissive either via setenforce 0 (until next boot) or via /etc/selinux/config ( survives reboots), dont disable it! - make sure fqdn work in both directions between engine and host(s) (either using /etc/hosts or DNS) - make sure NetworkManager is disabled and network enabled Joop ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] engine reports and dwh setup in 3.3.2
On Thu, Jan 16, 2014 at 5:55 PM, Yaniv Dary wrote: I think a this point it is safe to install. If I can go, can I use https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise_Virtualization/3.3-Beta/html/Installation_Guide/Installing_and_Configuring_the_History_Database.html as a workflow input? (with changes where needed, as rhevm-dwh -- ovirt-engine-dwh) You can try it, but not sure everything will be applicable. Let me know so that I can try Gianluca dwh part went ok and ovirt_engine_history db was created. The reports part got error # ovirt-engine-reports-setup Welcome to ovirt-engine-reports setup utility In order to proceed the installer must stop the ovirt-engine service Would you like to stop the ovirt-engine service (yes|no): yes Stopping ovirt-engine... [ DONE ] Editing XML files... [ DONE ] Setting DB connectivity...[ DONE ] Please choose a password for the reports admin user(s) (ovirt-admin): Warning: Weak Password. Retype password: Warning: Weak Password. Deploying Server... [ DONE ] Updating Redirect Servlet... [ DONE ] Importing reports... [ DONE ] Customizing Server... [ DONE ] global name 'preserveReportsJobs' is not defined Error encountered while installing ovirt-engine-reports, please consult the log file: /var/log/ovirt-engine/ovirt-engine-reports-setup-2014_01_17_11_20_29.log It seems the main point in log file, as in standard output is this: 2014-01-17 11:22:22::ERROR::ovirt-engine-reports-setup::1196::root:: Failed to complete the setup of the reports package! 2014-01-17 11:22:22::DEBUG::ovirt-engine-reports-setup::1197::root:: Traceback (most recent call last): File /bin/ovirt-engine-reports-setup, line 1163, in main if preserveReportsJobs: NameError: global name 'preserveReportsJobs' is not defined Let me know if you need full logs or if this is sufficient to debug code and propose a solution to try then again. Gianluca ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] engine reports and dwh setup in 3.3.2
Il 17/01/2014 11:40, Gianluca Cecchi ha scritto: On Thu, Jan 16, 2014 at 5:55 PM, Yaniv Dary wrote: I think a this point it is safe to install. If I can go, can I use https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise_Virtualization/3.3-Beta/html/Installation_Guide/Installing_and_Configuring_the_History_Database.html as a workflow input? (with changes where needed, as rhevm-dwh -- ovirt-engine-dwh) You can try it, but not sure everything will be applicable. Let me know so that I can try Gianluca dwh part went ok and ovirt_engine_history db was created. The reports part got error # ovirt-engine-reports-setup Welcome to ovirt-engine-reports setup utility In order to proceed the installer must stop the ovirt-engine service Would you like to stop the ovirt-engine service (yes|no): yes Stopping ovirt-engine... [ DONE ] Editing XML files... [ DONE ] Setting DB connectivity...[ DONE ] Please choose a password for the reports admin user(s) (ovirt-admin): Warning: Weak Password. Retype password: Warning: Weak Password. Deploying Server... [ DONE ] Updating Redirect Servlet... [ DONE ] Importing reports... [ DONE ] Customizing Server... [ DONE ] global name 'preserveReportsJobs' is not defined Error encountered while installing ovirt-engine-reports, please consult the log file: /var/log/ovirt-engine/ovirt-engine-reports-setup-2014_01_17_11_20_29.log It seems the main point in log file, as in standard output is this: 2014-01-17 11:22:22::ERROR::ovirt-engine-reports-setup::1196::root:: Failed to complete the setup of the reports package! 2014-01-17 11:22:22::DEBUG::ovirt-engine-reports-setup::1197::root:: Traceback (most recent call last): File /bin/ovirt-engine-reports-setup, line 1163, in main if preserveReportsJobs: NameError: global name 'preserveReportsJobs' is not defined This has been fixed yesterday http://gerrit.ovirt.org/#/c/23304/ Let me know if you need full logs or if this is sufficient to debug code and propose a solution to try then again. Gianluca ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] New user to oVirt, and I haz a sad so far...
Hi, my advice would be the following: for nodes use either a full minimal centos or fedora and install ovirt.org repo on top of that. then everything works. the node.isos provided by ovirt are in pre-alpha state to be honest. sure you still have to disable selinux (or better configure it correctly). But you have no problems with configurations which are not persisted and as a bonus you can install $your_favourite_tool on the node, such as tcpdump nmap etc. for debugging. Again: I would strongly advise against useing the node.isos from ovirt.org at the moment. There is just too much stuff not working or bugged, even simple things like network configuration. HTH -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] New user to oVirt, and I haz a sad so far...
Gabi, why not share with us engine.log for your failure of adding the disk? Yair - Original Message - From: Gabi C gab...@gmail.com To: Will Dennis (Live.com) willardden...@live.com Cc: users@ovirt.org Sent: Friday, January 17, 2014 9:53:55 AM Subject: Re: [Users] New user to oVirt, and I haz a sad so far... 've been there! :-D I mean exactly same issuse you had on Centos, I had on Fedora 19. Did you disable selinux on nodes? 'cause that's what is causing SSh connection closing My setup: 1 engine on vmware - fedora 19, up-to-date 2 nodes on IBM x series 3650 - fedora 19 based -oVirt Node - 3.0.3 - 1.1.fc19 with nodes beig in glusterfs cluster also. Right now, I'm banging my head against Operation Add-Disk failed to complete. , message I have got after adding a new virtual machine and try to addd its disk On Fri, Jan 17, 2014 at 6:08 AM, Will Dennis (Live.com) willardden...@live.com wrote: Hi all, ready for a story? (well, more of a rant, but hopefully it will be a good UX tale, and may even be entertaining.) Had one of the groups come to me at work this week and request a OpenStack setup. When I sat down and discussed their needs, it turns out that they really only need a multi-hypervisor setup where they can spin up VMs for their research projects. The VMs should be fairly long-lived, and will have persistent storage. Their other request is that the storage should be local on the hypervisor nodes (they plan to use Intel servers with 8-10 2TB drives for VM storage on each node.) They desire this in order to keep the VM I/O local - they do not have a SAN of any sort anyhow, and they do not care about live migration, etc. In any case, knowing that they did not want to afford a VMware setup (which is what I'm used to using), I proposed using oVirt to fill their needs, having heard and read up on it a bit (It's open-source VMware, right?) even though I had not used it before (I have however made single-node KVM hypervisors for their group before, utilizing Open vSwitch, libvirt, virt-manager etc., so I'm not completely ignorant of KVM/libvirt etc.) In any case, I took one of their older servers which was already running CentOS 6.5, installed the requisite packages on it, and in short order had an engine server up and running (oVirt 3.3.2). That seems to have been the easy part :-/ Now came the installation of a hypervisor node. I downloaded and burned an ISO of the latest oVirt node installer (ovirt-node-iso-3.0.3-1.1.vdsm.fc19.iso) and tried to install it on one of their target Intel servers. On the 1st try I got to the end of the setup TUI, invoked the Install link, and was promptly thrown an error (sorry, but forgot what it was, something like press X for a command prompt, or Reboot.) No problem, I rebooted, selected booting off the CD again, waited until the TUI came up, and when I tried to move past the first screen, it threw me out to a login prompt. OK, enough of that (the server takes a long time to reboot, and then boot off the CD) - I then thought I would try it on a VMware Workstation VM (yes, I get the irony, but VMware wkstn can handle nested virt, so it's a great testbed platform for OpenStack, etc.) because that would install a heck of a lot faster. That went a lot better - got the oVirt node 3.0.3 installed on the first try. More pain was soon to follow, however. I logged in and started configuring the node. The TUI was easy enough - much like an ESXi node ;) I set the NIC to IPv4 static, entered in the correct IP info, registered a DNS name for the IP I had assigned, and then tested pinging the engine, all was good. I then moved on to the section where you define the engine. I entered in the FQDN of the engine, verified the key fingerprint, and clicked the Save and Register link at the bottom. That seemed to work, so I completed the rest of the TUI, and then looked at the oVirt engine web UI. There was my new node, ready for authorization. I clicked the link to authorize it, and after a while, the UI came back with Install Failed status. Hmmm. So I went back to the node's TUI, and now some of the screens said that the IP addr was unconfigured? I went then to the Network screen, and sure enough, the NIC at the bottom showed Unconfigured. WTF? So I went and entered in the correct info back in the IPv4 section, and then arrowed down to the Save link and clicked it - and the next screen said something like No info needing changes, nothing to do. Wh? Went back to the network setup screen, NIC still showing Unconfigured even though the IPv4 info still was there. I did a ping test at this point from the Ping link on the network setup page, and what do you know - I could still ping IP's (the engine, the default gw, etc.) But as I moved around the TUI, other screens still said that the network was
[Users] oVirt Node ISO for oVirt 3.3 - Draft image for testing
Hey, as many of you have noticed there wasn't any well working oVirt Node ISO around for oVirt 3.3. To get this ball rolling again I've put together a draft image of ALPHA quality. It contains many fixes some of us have been working on over the last weeks. - Source ISO - To not drown Jenkins in a hell-of-a-patch-queue I've pushed the patches to https://github.com/fabiand/ovirt-node/tree/teamsync The ISO built from that patchset can be found here: http://fedorapeople.org/~fabiand/node/3.0.4/ovirt-node-iso-3.0.3-0.999.201401170926draft.vdsm.el6.iso Please test this draft image and provide feedback on how it works for you. If you encounter problems - and you probably will - please take a look here on how to debug them: http://www.ovirt.org/Node_Troubleshooting - Important Notes - SELinux: Boot this alpha image with enforcing=0 to log potential denials, but not block the calls. To fix those denials permanently please attach your /var/log/audit/audit.log to a bug in bugzilla. Known problems: - Exception is raised after registration to Engine - Many bond devices are show on network page - Denials appear in /var/log/audit/audit.log And don't hesitate to reach out to us if you want to get more involved with Node. - fabian signature.asc Description: This is a digitally signed message part ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] New user to oVirt, and I haz a sad so far...
Thanks Sven! On Fri, Jan 17, 2014 at 1:04 PM, Sven Kieske s.kie...@mittwald.de wrote: Hi, my advice would be the following: for nodes use either a full minimal centos or fedora and install ovirt.org repo on top of that. then everything works. the node.isos provided by ovirt are in pre-alpha state to be honest. sure you still have to disable selinux (or better configure it correctly). But you have no problems with configurations which are not persisted and as a bonus you can install $your_favourite_tool on the node, such as tcpdump nmap etc. for debugging. Again: I would strongly advise against useing the node.isos from ovirt.org at the moment. There is just too much stuff not working or bugged, even simple things like network configuration. HTH -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] New user to oVirt, and I haz a sad so far...
Hey Will, that was surely a bad start and we know about the state of Node. Please take a look at this email http://lists.ovirt.org/pipermail/node-devel/2014-January/000581.html to see where you can find a draft image which should address some bugs. - fabian Am Donnerstag, den 16.01.2014, 23:08 -0500 schrieb Will Dennis (Live.com): In any case, I took one of their older servers which was already running CentOS 6.5, installed the requisite packages on it, and in short order had an engine server up and running (oVirt 3.3.2). That seems to have been the easy part :-/ Now came the installation of a hypervisor node. I downloaded and burned an ISO of the latest oVirt node installer (ovirt-node-iso-3.0.3-1.1.vdsm.fc19.iso) and tried to install it on one of their target Intel servers. On the 1st try I got to the end of the setup TUI, invoked the Install link, and was promptly thrown an error (sorry, but forgot what it was, something like press X for a command prompt, or Reboot.) No problem, I rebooted, selected booting off the CD again, waited until the TUI came up, and when I tried to move past the first screen, it threw me out to a login prompt. OK, enough of that (the server takes a long time to reboot, and then boot off the CD) - I then thought I would try it on a VMware Workstation VM (yes, I get the irony, but VMware wkstn can handle nested virt, so it's a great testbed platform for OpenStack, etc.) because that would install a heck of a lot faster. That went a lot better - got the oVirt node 3.0.3 installed on the first try. More pain was soon to follow, however. I logged in and started configuring the node. The TUI was easy enough - much like an ESXi node ;) I set the NIC to IPv4 static, entered in the correct IP info, registered a DNS name for the IP I had assigned, and then tested pinging the engine, all was good. I then moved on to the section where you define the engine. I entered in the FQDN of the engine, verified the key fingerprint, and clicked the Save and Register link at the bottom. That seemed to work, so I completed the rest of the TUI, and then looked at the oVirt engine web UI. There was my new node, ready for authorization. I clicked the link to authorize it, and after a while, the UI came back with Install Failed status. Hmmm. So I went back to the node's TUI, and now some of the screens said that the IP addr was unconfigured? I went then to the Network screen, and sure enough, the NIC at the bottom showed Unconfigured. WTF? So I went and entered in the correct info back in the IPv4 section, and then arrowed down to the Save link and clicked it - and the next screen said something like No info needing changes, nothing to do. Wh? Went back to the network setup screen, NIC still showing Unconfigured even though the IPv4 info still was there. I did a ping test at this point from the Ping link on the network setup page, and what do you know - I could still ping IP's (the engine, the default gw, etc.) But as I moved around the TUI, other screens still said that the network was unconfigured. Went back to the Web UI of the engine, put the host in Maint, then tried to Activate it, still no go - Install Failed. Even though I had configured the node to allow remote access and set a password, and also verified via nmap that TCP port 22 on the node was indeed listening, when I tried to SSH into the node as admin, I immediately got a connection closed message, so that failed as well. Went back to the node's network setup page, set the IPv4 to Disabled, saved it, then went back and set it back to Static then re-entered the IPv4 info. Clicked the Save link, it went thru the setup again, came back with a success, verified with ping etc. that networking was working on the node. The engine web UI still said that it could not connect to the node however. So I put the node in Maint, and then removed it. I went back to the node, went to the Engine setup page, and re-did the screen to define the engine on the node. I notice that after I did this, however, that the node screens went back to saying that the network was unconfigured. Grr. But the node was back in the engine's Web UI, however no joy this time either - Install failed again. Well, the hell with this, said I - I removed the node again from the engine, and went and installed Fedora 19 minimal install on the VM, so I could use the directions found in http://www.ovirt.org/Quick_Start_Guide#Install_Fedora_Host and give that a try. (At least I can see what's going on with the node's OS using F19.) signature.asc Description: This is a digitally signed message part ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] get VM events via API?
I did a quick test with ovirt-shell: # Query vm id: [oVirt shell (connected)]# list vms --query name=testvm id : 8b2ad3a2-9704-47e6-99f1-f196856d7bd5 name : plsweb02 [oVirt shell (connected)]# # List events: list events --kwargs vm-id=a82874bb-152d-4efd-952b-3f3304af7bb3 Unfortunately this uses client side filtering. REST-API / python sdk should work similarly, AFAIK ovirt-shell uses the REST-API too On Fri, Jan 17, 2014 at 1:13 PM, Sven Kieske s.kie...@mittwald.de wrote: Hi, is it possible to get the vm events via any API/CLI? I'm talking about the events tab which you can select in webadmin when you selected a vm. If this is possible, how can we get the data? We could even write a vdsm hook, if necessary, but would of course prefer REST-API. Thanks. -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] Tip: staying informed for all oVirt bugs
Hi all, We recently created a fictitious Bugzilla user who is the QE contact for oVirt bugs - b...@ovirt.org In Bugzilla, it is possible to get notifications of all changes to bugs where this user is QE contact (which is usually all of them), by the following procedure: * Log into Bugzilla * Click on Preferences * Click on Email Preferences * At the bottom of that page, add b...@ovirt.org to the list of users you are watching You should now receive an email every time an oVirt bug is created, or closed, or a comment is added. Hope you find this helpful! Cheers, Dave. -- Dave Neary - Community Action and Impact Open Source and Standards, Red Hat - http://community.redhat.com Ph: +33 9 50 71 55 62 / Cell: +33 6 77 01 92 13 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Issues installing hosted-engine with 3.4.0 alpha
Il 15/01/2014 14:54, Sandro Bonazzola ha scritto: Il 15/01/2014 02:35, Andrew Lau ha scritto: I guess I spoke too soon.. Although, it allowed me to complete the setup prompts it now fails at Misc Configuration Error Logs: 2014-01-15 11:49:34 INFO otopi.plugins.ovirt_hosted_engine_setup.system.vdsmenv vdsmenv._connect:81 Waiting for VDSM hardware info 2014-01-15 11:49:35 INFO otopi.plugins.ovirt_hosted_engine_setup.system.vdsmenv vdsmenv._connect:81 Waiting for VDSM hardware info 2014-01-15 11:49:36 DEBUG otopi.plugins.ovirt_hosted_engine_setup.system.vdsmenv vdsmenv._connect:78 {'status': {'message': 'Recovering from crash or$ 2014-01-15 11:49:36 DEBUG otopi.context context.dumpEnvironment:456 ENVIRONMENT DUMP - BEGIN 2014-01-15 11:49:36 DEBUG otopi.context context.dumpEnvironment:471 ENV OVEHOSTED_VDSM/vdsClient=instance:'vdsClientGluster.GlusterService instance $ 2014-01-15 11:49:36 DEBUG otopi.context context.dumpEnvironment:473 ENVIRONMENT DUMP - END 2014-01-15 11:49:36 DEBUG otopi.context context._executeMethod:138 Stage misc METHOD otopi.plugins.ovirt_hosted_engine_setup.network.bridge.Plugin._m$ 2014-01-15 11:49:36 INFO otopi.plugins.ovirt_hosted_engine_setup.network.bridge bridge._misc:189 Configuring the management bridge 2014-01-15 11:49:37 DEBUG otopi.context context._executeMethod:152 method exception Traceback (most recent call last): File /usr/lib/python2.6/site-packages/otopi/context.py, line 142, in _executeMethod method['method']() File /usr/share/ovirt-hosted-engine-setup/scripts/../plugins/ovirt-hosted-engine-setup/network/bridge.py, line 194, in _misc ].s.getVdsCapabilities()['info']['nics'][nics] KeyError: 'info' we're investigating on the issue. Bug 1053420 - ovirt-hosted-engine-setup fails with vdsm issues Fixed, will be included in the next nightly. 2014-01-15 11:49:37 ERROR otopi.context context._executeMethod:161 Failed to execute stage 'Misc configuration': 'info' 2014-01-15 11:49:37 DEBUG otopi.transaction transaction.abort:131 aborting 'File transaction for '/etc/ovirt-hosted-engine/firewalld/hosted-console.x$ 2014-01-15 11:49:37 DEBUG otopi.transaction transaction.abort:131 aborting 'File transaction for '/etc/ovirt-hosted-engine/iptables.example'' 2014-01-15 11:49:37 DEBUG otopi.transaction transaction.abort:131 aborting 'File transaction for '/etc/sysconfig/iptables'' 2014-01-15 11:49:37 DEBUG otopi.transaction transaction.abort:131 aborting 'File transaction for '/etc/ovirt-hosted-engine-ha/broker.conf'' 2014-01-15 11:49:37 DEBUG otopi.context context.dumpEnvironment:456 ENVIRONMENT DUMP - BEGIN 2014-01-15 11:49:37 DEBUG otopi.context context.dumpEnvironment:471 ENV BASE/error=bool:'True' 2014-01-15 11:49:37 DEBUG otopi.context context.dumpEnvironment:473 ENVIRONMENT DUMP - END 2014-01-15 11:49:37 INFO otopi.context context.runSequence:395 Stage: Clean up 2014-01-15 11:49:37 DEBUG otopi.context context.runSequence:399 STAGE cleanup On Wed, Jan 15, 2014 at 11:27 AM, Andrew Lau and...@andrewklau.com mailto:and...@andrewklau.com wrote: Hi, Dropping VDSM list because I'm not subscribed. Using the nightly repo it seems to be fixed. I will continue to report any new findings. Thanks, Andrew. On Tue, Jan 14, 2014 at 8:52 PM, Sandro Bonazzola sbona...@redhat.com mailto:sbona...@redhat.com wrote: Il 14/01/2014 03:39, Andrew Lau ha scritto: It looks like vdsm is trying to execute: vdsm-tool unified_network_persistence_upgrade But my version of vdsm-tool has it labeled as upgrade-unified-persistence vdsm people, can you check this? On Tue, Jan 14, 2014 at 1:32 PM, Andrew Lau and...@andrewklau.com mailto:and...@andrewklau.com mailto:and...@andrewklau.com mailto:and...@andrewklau.com wrote: Hi, I'm giving the new hosted-engine feature a try with the new 3.4.0 alpha build on centos 6.5 hosted-engine --deply seems to fail at the 'Environment setup [ ERROR ] Failed to execute stage 'Environment setup': Command '/sbin/service' failed to execute Within the logs I believe it seems to be related to vdsm. Logs show VDS daemon is not running service vdsm start gives the following error: initctl: Job is already running: libvirtd vdsm: Running mkdirs vdsm: Running configure_coredump vdsm: Running run_init_hooks vdsm: Running gencerts vdsm: Running check_is_configured libvirt is already configured for vdsm sanlock service is already configured vdsm: Running validate_configuration SUCCESS: ssl configured to true. No conflicts vdsm: Running
Re: [Users] New user to oVirt, and I haz a sad so far...
Hi Will, Great to see you on the users list! (well, not great to see the content, but you know what I mean...) On 01/17/2014 05:08 AM, Will Dennis (Live.com) wrote: So I have no idea on how to proceed now, and what methods I can use to try and debug the connectivity problem between the engine and node. And there's many miles to go in setting up the whole environment. Maybe OpenStack would be easier ;-P No, I will press on and try to get this thing working... It seems it works for others, and looks like the right fit for the job. Just wish it was easier to get up and running. Oh yes, I tried reading the docs - go to http://www.ovirt.org/Quick_Start_Guide#Install_Hosts and click on the link for see the oVirt Node deployment documentation. Not too helpful... (Bug report has been opened.) Thanks for reading, and any clues on getting a node up and running gratefully accepted... I have had success setting up CentOS 6.5 minimal in nodes, configuring network, and then adding the node through the management interface - the Engine takes care of installing configuring the nodes. Have you tried this? Incidentally, you can also have Node images deployed via PXE boot (this seems orthogonal to your issue, though): http://www.ovirt.org/Node_PXE Cheers, Dave. -- Dave Neary - Community Action and Impact Open Source and Standards, Red Hat - http://community.redhat.com Ph: +33 9 50 71 55 62 / Cell: +33 6 77 01 92 13 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] SPICE on OSX
Hi Juan! I´ve read a post you made about packaging Remote-Viewer for OS X. I tested extracting and running this[1] package on a 10.7.5 machine, logging in to our webadmin portal with Firefox, clicking for console on a VM, remote-viewer starts up but doesn´t seems to load the console.vv file (the VM´s console never shows up). Is it something I´m missing? oVirt 3.3.1-2.el6 [1] http://people.freedesktop.org/~teuf/spice-gtk-osx/dmg/0.5.7/RemoteViewer-0.5.7-1.dmg -- Med Vänliga Hälsningar --- Karli Sjöberg Swedish University of Agricultural Sciences Box 7079 (Visiting Address Kronåsvägen 8) S-750 07 Uppsala, Sweden Phone: +46-(0)18-67 15 66 karli.sjob...@slu.se ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] get VM events via API?
Hi, this seems to work, but as far as I see I just get the events from the last start of the vm until now? Can the time range or the number of reported events be influenced in some way? Additionally I didn't find this function in REST-API yet. Maybe I'm looking in the wrong direction.. Am 17.01.2014 14:18, schrieb Sander Grendelman: I did a quick test with ovirt-shell: # Query vm id: [oVirt shell (connected)]# list vms --query name=testvm id : 8b2ad3a2-9704-47e6-99f1-f196856d7bd5 name : plsweb02 [oVirt shell (connected)]# # List events: list events --kwargs vm-id=a82874bb-152d-4efd-952b-3f3304af7bb3 Unfortunately this uses client side filtering. REST-API / python sdk should work similarly, AFAIK ovirt-shell uses the REST-API too On Fri, Jan 17, 2014 at 1:13 PM, Sven Kieske s.kie...@mittwald.de wrote: Hi, is it possible to get the vm events via any API/CLI? I'm talking about the events tab which you can select in webadmin when you selected a vm. If this is possible, how can we get the data? We could even write a vdsm hook, if necessary, but would of course prefer REST-API. Thanks. -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Tip: staying informed for all oVirt bugs
Or to make it short: If you are already logged into BZ open: https://bugzilla.redhat.com/userprefs.cgi?tab=email and add: Watch user list - add b...@ovirt.org Am 17.01.2014 14:54, schrieb Dave Neary: * Log into Bugzilla * Click on Preferences * Click on Email Preferences * At the bottom of that page, add b...@ovirt.org to the list of users you are watching -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] SPICE on OSX
On 01/17/2014 03:14 PM, Karli Sjöberg wrote: Hi Juan! I´ve read a post you made about packaging Remote-Viewer for OS X. I tested extracting and running this[1] package on a 10.7.5 machine, logging in to our webadmin portal with Firefox, clicking for console on a VM, remote-viewer starts up but doesn´t seems to load the console.vv file (the VM´s console never shows up). Is it something I´m missing? oVirt 3.3.1-2.el6 [1] http://people.freedesktop.org/~teuf/spice-gtk-osx/dmg/0.5.7/RemoteViewer-0.5.7-1.dmg I didn't make a post about that. According to the name in the URL [1] you probably wanted to contact Christophe Fergeau. -- Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta 3ºD, 28016 Madrid, Spain Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] [QE] oVirt 3.4.0 alpha / beta status
Il 17/01/2014 10:16, Sandro Bonazzola ha scritto: Hi, oVirt 3.4.0 alpha has been released and is actually on QA. An issue has been found in VDSM so we have updated the packages in alpha repositories for Fedora. We had an issue with nightly build for EL6 packages yesterday so EL6 repository is not yet updated. We'll try to sync it today, I'm sorry for the inconvenient. 3.4.0 alpha repository has been refreshed also for EL6. We'll start composing oVirt 3.4.0 beta on 2014-01-20 14:00 UTC from 3.4 branches. The bug tracker [1] shows the following bugs blocking the release: WhiteboardBug ID Summary gluster 1038988 Gluster brick sync does not work when host has multiple interfaces integration 1054080 gracefully warn about unsupported upgrade from legacy releases network 1054195 [NetworkLabels] Attaching two labeled networks to a cluster result in failure of the latter There are still 280 bugs [2] targeted to 3.4.0. Excluding node and documentation bugs we still have 237 bugs [3] targeted to 3.4.0. Please review them as soon as possible. Maintainers: - Please remember to rebuild your packages before 2014-01-21 12:00 UTC if you want them to be included in 3.4.0 beta. - Please add the bugs to the tracker if you think that 3.4.0 should not be released without them fixed. - Please provide ETA on blockers bugs - Please update the target to 3.4.1 or any next release for bugs that won't be in 3.4.0: it will ease gathering the blocking bugs for next releases. - Please fill release notes, the page has been created here [4] - Please update http://www.ovirt.org/OVirt_3.4_TestDay before 2014-01-23 For those who want to help testing the bugs, I suggest to add yourself as QA contact for the bug. Please also be prepared for upcoming oVirt 3.4.0 Test Day on 2014-01-23! Thanks to all people already testing 3.4.0 alpha! [1] https://bugzilla.redhat.com/1024889 [2] http://red.ht/1eIRZXM [3] http://red.ht/1auBU3r [4] http://www.ovirt.org/OVirt_3.4.0_release_notes -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] SPICE on OSX
On Fri, 2014-01-17 at 15:39 +0100, Juan Hernandez wrote: On 01/17/2014 03:14 PM, Karli Sjöberg wrote: Hi Juan! I´ve read a post you made about packaging Remote-Viewer for OS X. I tested extracting and running this[1] package on a 10.7.5 machine, logging in to our webadmin portal with Firefox, clicking for console on a VM, remote-viewer starts up but doesn´t seems to load the console.vv file (the VM´s console never shows up). Is it something I´m missing? oVirt 3.3.1-2.el6 [1] http://people.freedesktop.org/~teuf/spice-gtk-osx/dmg/0.5.7/RemoteViewer-0.5.7-1.dmg I didn't make a post about that. According to the name in the URL [1] you probably wanted to contact Christophe Fergeau. Hah, total brain-fart! It´s Friday, sorry:) Thanks for CC'ing the correct recipient for me. -- Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta 3ºD, 28016 Madrid, Spain Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L. So Christophe, is there anything more needed to make Remote-Viewer show my VM´s console in OS X? I mean, the application works, it starts up just fine, it just doesn´t show my VM´s console window... -- Med Vänliga Hälsningar --- Karli Sjöberg Swedish University of Agricultural Sciences Box 7079 (Visiting Address Kronåsvägen 8) S-750 07 Uppsala, Sweden Phone: +46-(0)18-67 15 66 karli.sjob...@slu.se ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Searching for VMs with snapshots
On 01/17/2014 10:56 AM, noc wrote: Hi All, I would like to see, in the webui, all VMs that have snapshots attached to them but I'm not able to construct a search that will work. For one thing there is no 'Snapshot' category so I think that it will be impossible. The use case is that I would like to have a way to see, in the webui, which VMs are running stateless, accidents happen :-( . having a snapshot doesn't mean they are stateless. the snapshot could be persistent as well - it is only temporary if you started the vm in stateless mode, or a vm from an 'automatic' vm pool type. the search indeed doesn't currently support these properties, you can open a BZ RFE for asking to add. in the meantime, you can script this via the cli or sdk ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] Making v2v easier?
I see a lot of threads about v2v pains (mostly from ESX?) I'm interested to see if we can make this simpler/easier. if you have experience with this, please describe the steps you are using (also the source platform), and how you would like to see this make simpler (I'm assuming that would start from somewhere in the webadmin probably). Thanks, Itamar ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] SPICE on OSX
Hey, On Fri, Jan 17, 2014 at 02:49:42PM +, Karli Sjöberg wrote: On Fri, 2014-01-17 at 15:39 +0100, Juan Hernandez wrote: On 01/17/2014 03:14 PM, Karli Sjöberg wrote: Hi Juan! I´ve read a post you made about packaging Remote-Viewer for OS X. I tested extracting and running this[1] package on a 10.7.5 machine, logging in to our webadmin portal with Firefox, clicking for console on a VM, remote-viewer starts up but doesn´t seems to load the console.vv file (the VM´s console never shows up). Is it something I´m missing? oVirt 3.3.1-2.el6 [1] http://people.freedesktop.org/~teuf/spice-gtk-osx/dmg/0.5.7/RemoteViewer-0.5.7-1.dmg So Christophe, is there anything more needed to make Remote-Viewer show my VM´s console in OS X? I mean, the application works, it starts up just fine, it just doesn´t show my VM´s console window... Yes this is a known issue, if you start remote-viewer foo.vv from a terminal, it should connect. When started from a browser, the filename is not passed in the same way as if the program was started from the command line, and this is very specific to OSX, so this bit is not implemented. remote-viewer patches to add support for this are very welcome ;) Christophe pgp6pmOS90iSx.pgp Description: PGP signature ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Attach NFS storage to multiple datacenter
On 01/17/2014 03:22 PM, Itamar Heim wrote: On 01/17/2014 02:24 AM, Dafna Ron wrote: sounds like a very creative use for the provider 3.3 feature and I like the way you think :) basically, it will require installing an all-in-one openstack but if downtime is such a big issue it could be a good solution... or just only glance, if no keystone is needed? not sure export to glance was implemented without authentication, but honestly, I think installing AIO using packstack might be easier from a user's prospective. Dafna On 01/16/2014 06:11 PM, Elad Ben Aharon wrote: Well, I'll be creative and I'll suggest you the following idea. There is an option to add a glance image server to RHEV as an external provider. This new feature allows you to export disks (not VMs) to the glance image repository while the VM which the disk is attached to is running. As for the VM configuration (which is not part of the disk that will be exported to the glance server), there is an option (which was introduced in RHEV3.3) to create a VM from a configuration file (OVF) of another VM. Dafna, Fede, Liron, Itamar, please back me up here. Will it be possible to perform those actions? Can we suggest this idea to the customer? - Original Message - From: Tobias Fiebig m...@wybt.net To: Elad Ben Aharon ebena...@redhat.com Cc: Users@ovirt.org List Users@ovirt.org Sent: Thursday, January 16, 2014 6:47:54 PM Subject: Re: [Users] Attach NFS storage to multiple datacenter Heho, Unfortunately yes, you'll suffer from a down time during this process. Well, as the downtime could be significantly decreased/the comfort for an migrate one vm, then the next largely increased, if an nfs storage could be mounted on multiple datacenters simultaneous i wonder if such a feature is planed? Main concern for me is that it might not really fit into the current way of handling storage in ovirt. With best Regards, Tobias -- Dafna Ron ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Attach NFS storage to multiple datacenter
On 01/17/2014 02:24 AM, Dafna Ron wrote: sounds like a very creative use for the provider 3.3 feature and I like the way you think :) basically, it will require installing an all-in-one openstack but if downtime is such a big issue it could be a good solution... or just only glance, if no keystone is needed? Dafna On 01/16/2014 06:11 PM, Elad Ben Aharon wrote: Well, I'll be creative and I'll suggest you the following idea. There is an option to add a glance image server to RHEV as an external provider. This new feature allows you to export disks (not VMs) to the glance image repository while the VM which the disk is attached to is running. As for the VM configuration (which is not part of the disk that will be exported to the glance server), there is an option (which was introduced in RHEV3.3) to create a VM from a configuration file (OVF) of another VM. Dafna, Fede, Liron, Itamar, please back me up here. Will it be possible to perform those actions? Can we suggest this idea to the customer? - Original Message - From: Tobias Fiebig m...@wybt.net To: Elad Ben Aharon ebena...@redhat.com Cc: Users@ovirt.org List Users@ovirt.org Sent: Thursday, January 16, 2014 6:47:54 PM Subject: Re: [Users] Attach NFS storage to multiple datacenter Heho, Unfortunately yes, you'll suffer from a down time during this process. Well, as the downtime could be significantly decreased/the comfort for an migrate one vm, then the next largely increased, if an nfs storage could be mounted on multiple datacenters simultaneous i wonder if such a feature is planed? Main concern for me is that it might not really fit into the current way of handling storage in ovirt. With best Regards, Tobias ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Blank VM Install Console
Michal, What's the most common tool people use to access oVirt VM consoles? Spice? VNC? - Original Message - From: Michal Skrivanek michal.skriva...@redhat.com To: David Li david...@sbcglobal.net Cc: Meital Avital mavi...@redhat.com; Einav Cohen eco...@redhat.com; Omer Frenkel ofren...@redhat.com; users@ovirt.org List users@ovirt.org; d...@redhat.com Ron d...@redhat.com Sent: Friday, January 17, 2014 1:12 AM Subject: Re: [Users] Blank VM Install Console On Jan 17, 2014, at 09:59 , Dafna Ron d...@redhat.com wrote: well, I have to admit that it has been a while since I tried logging in to a vm console from a Windows OS :) Adding some people to this which I think can help more than me... On 01/17/2014 12:58 AM, David Li wrote: Well, it didn't even have any traces to tell me if it's installed. I am supposed to see these according to the instruction but none of them showed up. * IE will prompt you with This website wants to install the following add-on SpiceX.cab... proceed by clicking the arrow on the install button and choose Install for All Users of this computer. * Depending on the version of IE a UAC dialog may pop up asking you if you want to allow SpiceX.cab If it does not Click on the install spice button again and it will. * In the UAC dialog click on the yes button. * The install will now proceed in the background. I am using W7 64bit with IE11. My engine is running on a RHEL6 machine. IE11 doesn't really work as of now. Try some more reasonable browser, IE10 would be also fine. activex setup requires some manual work as mentione at How_to_Connect_to_SPICE_Console_With_Portal wiki native invocation (that file to download you got) is easier, just associate with recent remote viewer and it should open it works on Windows, Linux and OSX (needs https://github.com/brianwcook/launchvv in addition) check out http://www.ovirt.org/Console_Client_Resources Thanks, mcihal - Original Message - From: Dafna Ron d...@redhat.com To: David Li david...@sbcglobal.net Cc: Madhav V Diwan mdi...@diwanconsulting.com; users@ovirt.org users@ovirt.org Sent: Thursday, January 16, 2014 4:16 PM Subject: Re: [Users] Blank VM Install Console 1. did you restart you're firefox after install? 2. what OS are you using? On 01/16/2014 11:40 PM, David Li wrote: This isn't working for me at this time. I have gone to the end of the instructions and clicked on Install Spice button in IE but nothing happened. Maybe someone with more knowledge should come out and make clarifications. - Original Message - From: Madhav V Diwan mdi...@diwanconsulting.com To: David Li david...@sbcglobal.net Cc: users@ovirt.org users@ovirt.org Sent: Thursday, January 16, 2014 1:51 PM Subject: Re: [Users] Blank VM Install Console yuck i dont know why they do not just have this already done in an rpm yes it probably works , i have not tested it , but virt-viewer is deprecated in favor of the newer Remote-Viewer by the way worst comes to worst you can always connect to the ovirt vm node server via virt-manager gui in linux .. or using macports virt-manager in OSX and as long as you have a username and password set up in libvirt password db /etc/libvirt/passwd.db use saslpasswd2 -a libvirt $USER on your ovirt vm host node to add your user account so you dont mess with ovirt's if you have winaxe or some other Xwindows on your windows machine you could probably just ssh with putty.exe to your ovirt node server and run virt-manager from there while displaying back to your windows desktop -Original Message- From: David Li david...@sbcglobal.net Reply-to: David Li david...@sbcglobal.net To: Madhav V Diwan mdi...@diwanconsulting.com Cc: users@ovirt.org users@ovirt.org Subject: Re: [Users] Blank VM Install Console Date: Thu, 16 Jan 2014 13:35:02 -0800 (PST) Is this page still applicable to ovirt 3.3.2? http://wiki.ovirt.org/How_to_Connect_to_SPICE_Console_With_Portal#Add_a_deployment_method_Server_Side - Original Message - From: Madhav V Diwan mdi...@diwanconsulting.com To: David Li david...@sbcglobal.net Cc: users@ovirt.org users@ovirt.org Sent: Thursday, January 16, 2014 1:28 PM Subject: Re: [Users] Blank VM Install Console install them wherever your firefox browser is installed... whichever machine you are using to browse to the portal from unfortunately i believe ovirts' spice viewing only works on linux desktops running firefox currently also the ovirt vnc implementation assumes you have remote-viewer which can open that .vv file that pops up.. again remote-viewer would only be available on linux desktops.. there IS a MAC OS port
Re: [Users] Making v2v easier?
Hi, I myself have no experience with this so far, but I can quote blaster from the ML: Blaster wrote: I haven’t tried this yet, but if I had to move a VM from ESXi to oVirt this is how I would do it… (actually, this is how I did it with Windows 7 guests…) Shutdown guest on ESXi (or use GhettoVCB to make a snapshot backup if you don’t want an outtage) NFS copy guest from ESXi server to temp storage somewhere qemu-img convert guest.vmdk -O raw guest.raw Create an oVirt guest with the appropriate OS type Add a disk of the same GB to the guest After oVirt finishes creating the disk, copy the guest.raw file over the disk image oVirt made boot guest and install qemu-agent, ovirt-agent, spice-agent (or better yet, do this before you shutdown on ESXi) remove VMware tools. The importing and virt2v procedure seems far to complex and error prone to me. Maybe he can add something :) -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] VM Migration failed
Which error are you getting in the UI? Can you please attach the full engine and vdsm logs? Also, please check if there is a relevant error in /var/log/messages - Original Message - From: Edgars M. edgars.maz...@gmail.com To: users@ovirt.org Sent: Friday, January 17, 2014 3:42:37 PM Subject: [Users] VM Migration failed Hi I am experiencing issues with manual VM migration. VM fails to migrate to other node in the same Cluster. Here are some relevant engine.log entries: ERROR [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (DefaultQuartzScheduler_Worker-73) Rerun vm a31cfd62-26fc-4396-8a83-1aed68c7fd39. Called from vds novmnode1 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateStatusVDSCommand] (pool-6-thread-49) Failed in MigrateStatusVDS method ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateStatusVDSCommand] (pool-6-thread-49) Error code migrateErr and error message VDSGenericException: VDSErrorException: Failed to MigrateStatusVDS, error = Fatal error during migration ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateStatusVDSCommand] (pool-6-thread-49) Command MigrateStatusVDS execution failed. Exception: VDSErrorException: VDSGenericException: VDSErrorException: Failed to MigrateStatusVDS, error = Fatal error during migration Both Engine and Node are running CentOS 6.5 x64. oVirt Engine Version: 3.3.2-1.el6. VDSM version 4.13.2-1. I restarted engine and vdsm, that did not help. Also in vdsm log file I see the following errors related to the same VM ID: Thread-27::ERROR::2014-01-17 16:37:06,271::sampling::355::vm.Vm::(collect) vmId=`a31cfd62-26fc-4396-8a83-1aed68c7fd39`::Stats function failed: AdvancedStatsFunction _highWrite at 0x26efb58 Any hints? BR Edgars ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Making v2v easier?
On Fri, Jan 17, 2014 at 4:19 PM, Itamar Heim ih...@redhat.com wrote: I see a lot of threads about v2v pains (mostly from ESX?) I'm interested to see if we can make this simpler/easier. hear hear! if you have experience with this, please describe the steps you are using (also the source platform), Sources: - Existing KVM (virt-manager/libvirt) platform - ESX - ova/ovf templates from several sources Methods: - KVM: virt-v2v with libvirtxml option, works reasonably well, most issues are with windows guests where virt-v2v needs libguestfs-winsupport and virtio-win (RHEL only) - ESX: virt-v2v which works reasonably well _if_ the right packages (libguestfs-winsupport virtio-win) are installed. virt-v2v can be used directly from ESX/ESX host (configure .netrc first) but this is quite slow another option is to export the VM as an OVA and then import it with virt-v2v - ova/ovf templates: hit and miss with virt-v2v, especially if they contain something that is not a regular windows/linux guest. Another option is to do a direct copy of the disks on a pre-created VM, clumsy. and how you would like to see this make simpler (I'm assuming that would start from somewhere in the webadmin probably). Webadmin would be nice, but better behaviour from existing tools would be a nice start too. For example: the flow with virt-v2v is 1) Analyze source, look for disks 2) Convert/copy disks to ovirt export domain 3) Try to add virtio stuff to the copied disks on the export domain If step 3 fails ( which happens a LOT), the copied disks are removed. This is very frustrating if you just waited a couple of hours for a large VM (e.g. 200GB) to be copied :( Some kind of graceful abort/resume would be VERY welcome. Another issue with virt-v2v is that it _always_ tries to add virtio drivers. I have a virtual appliance that contains some kind of proprietary embedded OS: adding drivers will always fail, give me some option to override that and configure simple ide / e1000 hardware for the VM Thanks, Itamar ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] New user to oVirt, and I haz a sad so far...
Thanks, Joop, for the node platform best practices. I did turn selinux from enforcing to permissive, and then when I tried to ping the engine by fqdn, I saw that DNS lookups were failing (even tho resolv.conf looked correct.) Did a 'yum remove NetworkManager and then fixed the /etc/sysconfig/network-scripts/ifcfg-nic, and then after a reboot, I can now see the info for the node in the WUI on the manager, although the status for the node is still Non Operational. Where can I find the node install log (on the engine or the node, and name?) (Sorry for noob status, but I am a quick learner ;) Thanks, Will From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of noc Sent: Friday, January 17, 2014 3:35 AM To: users@ovirt.org Subject: Re: [Users] New user to oVirt, and I haz a sad so far... On 17-1-2014 8:53, Gabi C wrote: 've been there! :-D I mean exactly same issuse you had on Centos, I had on Fedora 19. Did you disable selinux on nodes? 'cause that's what is causing SSh connection closing My setup: 1 engine on vmware - fedora 19, up-to-date 2 nodes on IBM x series 3650 - fedora 19 based -oVirt Node - 3.0.3 - 1.1.fc19 with nodes beig in glusterfs cluster also. Right now, I'm banging my head against Operation Add-Disk failed to complete. , message I have got after adding a new virtual machine and try to addd its disk On Fri, Jan 17, 2014 at 6:08 AM, Will Dennis (Live.com) willardden...@live.com wrote: Hi all, ready for a story? (well, more of a rant, but hopefully it will be a good UX tale, and may even be entertaining.) Had one of the groups come to me at work this week and request a OpenStack setup. When I sat down and discussed their needs, it turns out that they really only need a multi-hypervisor setup where they can spin up VMs for their research projects. The VMs should be fairly long-lived, and will have persistent storage. Their other request is that the storage should be local on the hypervisor nodes (they plan to use Intel servers with 8-10 2TB drives for VM storage on each node.) They desire this in order to keep the VM I/O local - they do not have a SAN of any sort anyhow, and they do not care about live migration, etc @Will If the installation ends, either with or without error, it will give you a log location. Upload the log to a paste.bin and mail the link. @Gabi, There should be more info in either the vdsm.log on the SPM server or in the engine.log on the engine server, see above for lettings us know what the error is. Having installed oVirt, probably dozens of times, I have some guidelines: - temporarily disable firewalld/iptables (if all works, enable should still work, scripts with rules are generated and location is given) - make selinux permissive either via setenforce 0 (until next boot) or via /etc/selinux/config ( survives reboots), dont disable it! - make sure fqdn work in both directions between engine and host(s) (either using /etc/hosts or DNS) - make sure NetworkManager is disabled and network enabled Joop ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] New user to oVirt, and I haz a sad so far...
Non-operational means it's connected, but missing a cluster resource (can't access a storage domain, or misses one of the network definitions the cluster should have) On Fri, Jan 17, 2014 at 9:55 AM, Will Dennis (Live.com) willardden...@live.com wrote: Thanks, Joop, for the node platform best practices… I did turn selinux from “enforcing” to “permissive”, and then when I tried to ping the engine by fqdn, I saw that DNS lookups were failing (even tho resolv.conf looked correct…) Did a ‘yum remove NetworkManager” and then fixed the /etc/sysconfig/network-scripts/ifcfg-nic, and then after a reboot, I can now see the info for the node in the WUI on the manager, although the status for the node is still “Non Operational”… Where can I find the node install log (on the engine or the node, and name?) (Sorry for noob status, but I am a quick learner ;) Thanks, Will *From:* users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] *On Behalf Of *noc *Sent:* Friday, January 17, 2014 3:35 AM *To:* users@ovirt.org *Subject:* Re: [Users] New user to oVirt, and I haz a sad so far... On 17-1-2014 8:53, Gabi C wrote: 've been there! :-D I mean exactly same issuse you had on Centos, I had on Fedora 19. Did you disable selinux on nodes? 'cause that's what is causing SSh connection closing My setup: 1 engine on vmware - fedora 19, up-to-date 2 nodes on IBM x series 3650 - fedora 19 based -oVirt Node - 3.0.3 - 1.1.fc19 with nodes beig in glusterfs cluster also. Right now, I'm banging my head against Operation Add-Disk failed to complete. , message I have got after adding a new virtual machine and try to addd its disk On Fri, Jan 17, 2014 at 6:08 AM, Will Dennis (Live.com) willardden...@live.com wrote: Hi all, ready for a story? (well, more of a rant, but hopefully it will be a good UX tale, and may even be entertaining.) Had one of the groups come to me at work this week and request a OpenStack setup. When I sat down and discussed their needs, it turns out that they really only need a multi-hypervisor setup where they can spin up VMs for their research projects. The VMs should be fairly long-lived, and will have persistent storage. Their other request is that the storage should be local on the hypervisor nodes (they plan to use Intel servers with 8-10 2TB drives for VM storage on each node.) They desire this in order to keep the VM I/O local - they do not have a SAN of any sort anyhow, and they do not care about live migration, etc @Will If the installation ends, either with or without error, it will give you a log location. Upload the log to a paste.bin and mail the link. @Gabi, There should be more info in either the vdsm.log on the SPM server or in the engine.log on the engine server, see above for lettings us know what the error is. Having installed oVirt, probably dozens of times, I have some guidelines: - temporarily disable firewalld/iptables (if all works, enable should still work, scripts with rules are generated and location is given) - make selinux permissive either via setenforce 0 (until next boot) or via /etc/selinux/config ( survives reboots), dont disable it! - make sure fqdn work in both directions between engine and host(s) (either using /etc/hosts or DNS) - make sure NetworkManager is disabled and network enabled Joop ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] New user to oVirt, and I haz a sad so far...
- Original Message - From: Will Dennis (Live.com) willardden...@live.com Sent: Friday, January 17, 2014 11:55:55 AM Thanks, Joop, for the node platform best practices… I did turn selinux from “enforcing” to “permissive”, and then when I tried to ping the engine by fqdn, I saw that DNS lookups were failing (even tho resolv.conf looked correct…) Did a ‘yum remove NetworkManager” and then fixed the /etc/sysconfig/network-scripts/ifcfg-nic, and then after a reboot, I can now see the info for the node in the WUI on the manager, although the status for the node is still “Non Operational”… In the GUI, within the Events sub-tab of that node, there should be an error message detailing the reason for that node being in the Non-Operational state; what does this message say? Where can I find the node install log (on the engine or the node, and name?) (Sorry for noob status, but I am a quick learner ;) Thanks, Will From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of noc Sent: Friday, January 17, 2014 3:35 AM To: users@ovirt.org Subject: Re: [Users] New user to oVirt, and I haz a sad so far... On 17-1-2014 8:53, Gabi C wrote: 've been there! :-D I mean exactly same issuse you had on Centos, I had on Fedora 19. Did you disable selinux on nodes? 'cause that's what is causing SSh connection closing My setup: 1 engine on vmware - fedora 19, up-to-date 2 nodes on IBM x series 3650 - fedora 19 based -oVirt Node - 3.0.3 - 1.1.fc19 with nodes beig in glusterfs cluster also. Right now, I'm banging my head against Operation Add-Disk failed to complete. , message I have got after adding a new virtual machine and try to addd its disk On Fri, Jan 17, 2014 at 6:08 AM, Will Dennis (Live.com) willardden...@live.com wrote: Hi all, ready for a story? (well, more of a rant, but hopefully it will be a good UX tale, and may even be entertaining.) Had one of the groups come to me at work this week and request a OpenStack setup. When I sat down and discussed their needs, it turns out that they really only need a multi-hypervisor setup where they can spin up VMs for their research projects. The VMs should be fairly long-lived, and will have persistent storage. Their other request is that the storage should be local on the hypervisor nodes (they plan to use Intel servers with 8-10 2TB drives for VM storage on each node.) They desire this in order to keep the VM I/O local - they do not have a SAN of any sort anyhow, and they do not care about live migration, etc @Will If the installation ends, either with or without error, it will give you a log location. Upload the log to a paste.bin and mail the link. @Gabi, There should be more info in either the vdsm.log on the SPM server or in the engine.log on the engine server, see above for lettings us know what the error is. Having installed oVirt, probably dozens of times, I have some guidelines: - temporarily disable firewalld/iptables (if all works, enable should still work, scripts with rules are generated and location is given) - make selinux permissive either via setenforce 0 (until next boot) or via /etc/selinux/config ( survives reboots), dont disable it! - make sure fqdn work in both directions between engine and host(s) (either using /etc/hosts or DNS) - make sure NetworkManager is disabled and network enabled Joop ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] New user to oVirt, and I haz a sad so far...
Aha! Host hostname does not comply with the cluster Default networks, the following networks are missing on host: 'ovirtmgmt' What must I do to correct this? I do not remember reading about having to do something like this in the docs... Also, the node is on a different network that the engine, not sure if this matters or not (the two network do have connectivity to each other thru a router.) Thanks, Will Date: Fri, 17 Jan 2014 12:10:50 -0500 From: eco...@redhat.com To: willardden...@live.com CC: n...@nieuwland.nl; users@ovirt.org Subject: Re: [Users] New user to oVirt, and I haz a sad so far... - Original Message - From: Will Dennis (Live.com) willardden...@live.com Sent: Friday, January 17, 2014 11:55:55 AM Thanks, Joop, for the node platform best practices… I did turn selinux from “enforcing” to “permissive”, and then when I tried to ping the engine by fqdn, I saw that DNS lookups were failing (even tho resolv.conf looked correct…) Did a ‘yum remove NetworkManager” and then fixed the /etc/sysconfig/network-scripts/ifcfg-nic, and then after a reboot, I can now see the info for the node in the WUI on the manager, although the status for the node is still “Non Operational”… In the GUI, within the Events sub-tab of that node, there should be an error message detailing the reason for that node being in the Non-Operational state; what does this message say? Where can I find the node install log (on the engine or the node, and name?) (Sorry for noob status, but I am a quick learner ;) Thanks, Will From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of noc Sent: Friday, January 17, 2014 3:35 AM To: users@ovirt.org Subject: Re: [Users] New user to oVirt, and I haz a sad so far... On 17-1-2014 8:53, Gabi C wrote: 've been there! :-D I mean exactly same issuse you had on Centos, I had on Fedora 19. Did you disable selinux on nodes? 'cause that's what is causing SSh connection closing My setup: 1 engine on vmware - fedora 19, up-to-date 2 nodes on IBM x series 3650 - fedora 19 based -oVirt Node - 3.0.3 - 1.1.fc19 with nodes beig in glusterfs cluster also. Right now, I'm banging my head against Operation Add-Disk failed to complete. , message I have got after adding a new virtual machine and try to addd its disk On Fri, Jan 17, 2014 at 6:08 AM, Will Dennis (Live.com) willardden...@live.com wrote: Hi all, ready for a story? (well, more of a rant, but hopefully it will be a good UX tale, and may even be entertaining.) Had one of the groups come to me at work this week and request a OpenStack setup. When I sat down and discussed their needs, it turns out that they really only need a multi-hypervisor setup where they can spin up VMs for their research projects. The VMs should be fairly long-lived, and will have persistent storage. Their other request is that the storage should be local on the hypervisor nodes (they plan to use Intel servers with 8-10 2TB drives for VM storage on each node.) They desire this in order to keep the VM I/O local - they do not have a SAN of any sort anyhow, and they do not care about live migration, etc @Will If the installation ends, either with or without error, it will give you a log location. Upload the log to a paste.bin and mail the link. @Gabi, There should be more info in either the vdsm.log on the SPM server or in the engine.log on the engine server, see above for lettings us know what the error is. Having installed oVirt, probably dozens of times, I have some guidelines: - temporarily disable firewalld/iptables (if all works, enable should still work, scripts with rules are generated and location is given) - make selinux permissive either via setenforce 0 (until next boot) or via /etc/selinux/config ( survives reboots), dont disable it! - make sure fqdn work in both directions between engine and host(s) (either using /etc/hosts or DNS) - make sure NetworkManager is disabled and network enabled Joop ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] New user to oVirt, and I haz a sad so far...
go to the Network Interface sub-tab of that node and click the Setup Host Networks button. In the dialog that has opened, attach the 'ovirtmgmt' network from the right-hand side of the dialog to one of your node's NICs on the left-hand side by dragging that network onto the NIC. click OK. after a short while, your Host should become 'Up'. - Original Message - From: Willard Dennis willardden...@live.com To: Einav Cohen eco...@redhat.com Cc: noc n...@nieuwland.nl, users@ovirt.org Sent: Friday, January 17, 2014 12:15:22 PM Subject: RE: [Users] New user to oVirt, and I haz a sad so far... Aha! Host hostname does not comply with the cluster Default networks, the following networks are missing on host: 'ovirtmgmt' What must I do to correct this? I do not remember reading about having to do something like this in the docs... Also, the node is on a different network that the engine, not sure if this matters or not (the two network do have connectivity to each other thru a router.) Thanks, Will Date: Fri, 17 Jan 2014 12:10:50 -0500 From: eco...@redhat.com To: willardden...@live.com CC: n...@nieuwland.nl; users@ovirt.org Subject: Re: [Users] New user to oVirt, and I haz a sad so far... - Original Message - From: Will Dennis (Live.com) willardden...@live.com Sent: Friday, January 17, 2014 11:55:55 AM Thanks, Joop, for the node platform best practices… I did turn selinux from “enforcing” to “permissive”, and then when I tried to ping the engine by fqdn, I saw that DNS lookups were failing (even tho resolv.conf looked correct…) Did a ‘yum remove NetworkManager” and then fixed the /etc/sysconfig/network-scripts/ifcfg-nic, and then after a reboot, I can now see the info for the node in the WUI on the manager, although the status for the node is still “Non Operational”… In the GUI, within the Events sub-tab of that node, there should be an error message detailing the reason for that node being in the Non-Operational state; what does this message say? Where can I find the node install log (on the engine or the node, and name?) (Sorry for noob status, but I am a quick learner ;) Thanks, Will From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of noc Sent: Friday, January 17, 2014 3:35 AM To: users@ovirt.org Subject: Re: [Users] New user to oVirt, and I haz a sad so far... On 17-1-2014 8:53, Gabi C wrote: 've been there! :-D I mean exactly same issuse you had on Centos, I had on Fedora 19. Did you disable selinux on nodes? 'cause that's what is causing SSh connection closing My setup: 1 engine on vmware - fedora 19, up-to-date 2 nodes on IBM x series 3650 - fedora 19 based -oVirt Node - 3.0.3 - 1.1.fc19 with nodes beig in glusterfs cluster also. Right now, I'm banging my head against Operation Add-Disk failed to complete. , message I have got after adding a new virtual machine and try to addd its disk On Fri, Jan 17, 2014 at 6:08 AM, Will Dennis (Live.com) willardden...@live.com wrote: Hi all, ready for a story? (well, more of a rant, but hopefully it will be a good UX tale, and may even be entertaining.) Had one of the groups come to me at work this week and request a OpenStack setup. When I sat down and discussed their needs, it turns out that they really only need a multi-hypervisor setup where they can spin up VMs for their research projects. The VMs should be fairly long-lived, and will have persistent storage. Their other request is that the storage should be local on the hypervisor nodes (they plan to use Intel servers with 8-10 2TB drives for VM storage on each node.) They desire this in order to keep the VM I/O local - they do not have a SAN of any sort anyhow, and they do not care about live migration, etc @Will If the installation ends, either with or without error, it will give you a log location. Upload the log to a paste.bin and mail the link. @Gabi, There should be more info in either the vdsm.log on the SPM server or in the engine.log on the engine server, see above for lettings us know what the error is. Having installed oVirt, probably dozens of times, I have some guidelines: - temporarily disable firewalld/iptables (if all works, enable should still work, scripts with rules are generated and location is given) - make selinux permissive either via setenforce 0 (until next boot) or via /etc/selinux/config ( survives reboots), dont disable it! - make sure fqdn work in both directions between engine and host(s) (either using /etc/hosts or DNS) - make sure NetworkManager
Re: [Users] New user to oVirt, and I haz a sad so far...
Date: Fri, 17 Jan 2014 15:12:20 +0100 From: dne...@redhat.com To: willardden...@live.com; users@ovirt.org Subject: Re: [Users] New user to oVirt, and I haz a sad so far... Hi Will, Great to see you on the users list! (well, not great to see the content, but you know what I mean...) Thanks for your help to date! On 01/17/2014 05:08 AM, Will Dennis (Live.com) wrote: Thanks for reading, and any clues on getting a node up and running gratefully accepted... I have had success setting up CentOS 6.5 minimal in nodes, configuring network, and then adding the node through the management interface - the Engine takes care of installing configuring the nodes. Have you tried this? No, I was told by someone else (in IRC I believe) that only Fedora could be used as a node... I would much rather use EL6.5 (CentOS)... What/where is the proper RPM for this platform? Cheers, Dave. Thanks again,Will ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] installation failed on cluster host
its obvious that something is bad with your repo. can you please run: yum repolist and: for f in `ls /etc/yum.repos.d/`; do cat /etc/yum.repos.d/$f; done i'd check the centos repo, I use: [BASE] name=BASE baseurl=http://mirror.centos.org/centos/6/os/x86_64/ gpgcheck=0 enabled=1 On Wed, Jan 15, 2014 at 1:43 AM, Dafna Ron d...@redhat.com wrote: Hi William, The issue you are having is a yum issue with Centos and not ovirt issue. I found several posts on it by searching 'Cannot find a valid baseurl for repo: base' in google. https://www.google.co.uk/?gws_rd=crei=GsnVUu- YCo7T7AbG6YCICw#q=Cannot+find+a+valid+baseurl+for+repo:+ base+CentOS+6.5spell=1 can you please look at the link and see if any of the forms were reporting anything like you describe with Yum? If you do, can you also post it here so others encountering this yum issue on centos can use your workaround? Just so you know, ovirt has a deployment log under /var/log/ovirt-engine/host-deploy/ so if a host installation fails, it should be reported there in a way which should be easy to debug. Thanks, Dafna On 01/14/2014 11:29 PM, William Kwan wrote: HI, Running through the whole installation exercises on two hosts again with the latest release on CentOS6.5. I added a host to a new cluster. There are action items listed under the new host. One of them is Host installation failed. Fix installation issues and try to Re-Install I clicked Re-install, I monitor the engine.log and see the followings Installation 10.10.25.10: Yum [u'Errors were encountered while downloading packages.', u'libselinux- python-2.0.94-5.3.el6_4.1.x86_64: failure: Packages/libselinux-python-2.0.94-5.3.el6_4.1.x86_64.rpm from base: [Errno 256] No more mirrors to try.'] I'm sure I ran yum update already and I cleaned the db and rerun update...etc. Eventually I manually did `yum install vdsm.x86_64` on the host. Try to run re-install again and I still get yum error. Yum Cannot queue package iproute: Cannot find a valid baseurl for repo: base ERROR [org.ovirt.engine.core.bll.InstallerMessages] (VdsDeploy) Installation 10.10.25.10: Failed to execute stage 'Environment packages setup': Cannot find a valid baseurl for repo: base iproute is sure installed. # rpm -qa|grep iproute iproute-2.6.32-31.el6.x86_64 Something in ssh? Password is sure correct, what could be wrong Will ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Dafna Ron ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] New user to oVirt, and I haz a sad so far...
Uuup! :) Thanks for your assistance, Einav! Now onwards Date: Fri, 17 Jan 2014 12:18:30 -0500 From: eco...@redhat.com To: willardden...@live.com CC: n...@nieuwland.nl; users@ovirt.org Subject: Re: [Users] New user to oVirt, and I haz a sad so far... go to the Network Interface sub-tab of that node and click the Setup Host Networks button. In the dialog that has opened, attach the 'ovirtmgmt' network from the right-hand side of the dialog to one of your node's NICs on the left-hand side by dragging that network onto the NIC. click OK. after a short while, your Host should become 'Up'. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] New user to oVirt, and I haz a sad so far...
Docs should be updated with a warning then as to the alpha status of the ovirt-node product... It was a huge time-sink for me. - Will -Original Message- From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Sven Kieske Sent: Friday, January 17, 2014 6:05 AM To: users@ovirt.org; users@ovirt.org Subject: Re: [Users] New user to oVirt, and I haz a sad so far... Hi, my advice would be the following: for nodes use either a full minimal centos or fedora and install ovirt.org repo on top of that. then everything works. the node.isos provided by ovirt are in pre-alpha state to be honest. sure you still have to disable selinux (or better configure it correctly). But you have no problems with configurations which are not persisted and as a bonus you can install $your_favourite_tool on the node, such as tcpdump nmap etc. for debugging. Again: I would strongly advise against useing the node.isos from ovirt.org at the moment. There is just too much stuff not working or bugged, even simple things like network configuration. HTH -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] New user to oVirt, and I haz a sad so far...
Hi, On 01/17/2014 06:19 PM, Willard Dennis wrote: I have had success setting up CentOS 6.5 minimal in nodes, configuring network, and then adding the node through the management interface - the Engine takes care of installing configuring the nodes. Have you tried this? No, I was told by someone else (in IRC I believe) that only Fedora could be used as a node... I would much rather use EL6.5 (CentOS)... What/where is the proper RPM for this platform? That was true until during the oVirt 3.2 release cycle, but we have had an EL6 Node for a while. oVirt Node is a stripped down OS image - installing the Node packages on a minimal EL6 install has also worked since the 3.2 series. Cheers, Dave. -- Dave Neary - Community Action and Impact Open Source and Standards, Red Hat - http://community.redhat.com Ph: +33 9 50 71 55 62 / Cell: +33 6 77 01 92 13 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] vlan on mgmt network
Thanks all for the info. I'm trying the suggestions with 3.3.2-1.el6 Assaf mentioned the following which is true. You can make ovirtmgmt a non-VM, untagged (non-VLAN) network, then placeas many VM, tagged networks as you'd like on the same NIC or bond. I tried a few things and I haven't been able to find a way through. Obviously or not, there are more facts/rules. Just put up a few of them here Cannot have more than one non-VLAN network on one interface Cannot have a non-VLAN VM network and VLAN-tagged networks on one interface. ( got this when I tried to drag a VLAN-tagged VM network on the same interface as the non-VLAN VM network). I'll try to test adding a bond0.vlan. I need to have bond0 - for both mgmt network and a vlan bond1 - for another subnet. Will On Thursday, January 16, 2014 1:50 PM, Juan Pablo Lorier jplor...@gmail.com wrote: Hi William, You can have several logical networks on the same interface. If ovirtmgmt is not a vm network you can even mix tagged and untagged networks (if not, you can't mix). You don's have to do anything besides creating the logical networks in ovirt and assign them to the interface, ovirt takes care of creating the virtual interfaces it needs. What you can't do is have more than one logical network per vlan (I think there's a feature request on this, I know I've asked it on the list:-) ). Regards,___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] Failed to invoke scheduled method gluster_async_task_poll_event
Hi, Keep seeing this in my engine.log, any idea where does this come from? Failed to invoke scheduled method gluster_async_task_poll_event: java.lang.reflect.InvocationTargetException I'm using 3.3.2-1.el6 with glusterfs-server-3.4.2-1.el6.x86_64 vdsm-gluster-4.13.2-1.el6.noarch 2014-01-17 14:26:11,615 ERROR [org.ovirt.engine.core.utils.timer.SchedulerUtilQuartzImpl] (DefaultQuartzScheduler_Worker-96) Failed to invoke scheduled method gluster_async_task_poll_event: java.lang.reflect.InvocationTargetException at sun.reflect.GeneratedMethodAccessor31.invoke(Unknown Source) [:1.7.0_51] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.7.0_51] at java.lang.reflect.Method.invoke(Method.java:606) [rt.jar:1.7.0_51] at org.ovirt.engine.core.utils.timer.JobWrapper.execute(JobWrapper.java:60) [scheduler.jar:] at org.quartz.core.JobRunShell.run(JobRunShell.java:213) [quartz.jar:] at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:557) [quartz.jar:] Caused by: org.ovirt.engine.core.common.errors.VdcBLLException: VdcBLLException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSNetworkException: org.apache.xmlrpc.XmlRpcException: type 'exceptions.Exception':method glusterTasksList is not supported (Failed with error VDS_NETWORK_ERROR and code 5022) at org.ovirt.engine.core.bll.VdsHandler.handleVdsResult(VdsHandler.java:122) [bll.jar:] at org.ovirt.engine.core.bll.VDSBrokerFrontendImpl.RunVdsCommand(VDSBrokerFrontendImpl.java:33) [bll.jar:] at org.ovirt.engine.core.bll.gluster.tasks.GlusterTasksService.runVdsCommand(GlusterTasksService.java:60) [bll.jar:] at org.ovirt.engine.core.bll.gluster.tasks.GlusterTasksService.getTaskListForCluster(GlusterTasksService.java:28) [bll.jar:] at org.ovirt.engine.core.bll.gluster.GlusterTasksSyncJob.updateTasksInCluster(GlusterTasksSyncJob.java:67) [bll.jar:] at org.ovirt.engine.core.bll.gluster.GlusterTasksSyncJob.updateGlusterAsyncTasks(GlusterTasksSyncJob.java:56) [bll.jar:] ... 6 more Will___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] connecting to oVirt/RHEV VMs through proxy and the oVirt API
Hi Juan, On Fri, Jan 17, 2014 at 4:55 AM, Juan Hernandez jhern...@redhat.com wrote: You are right. Obtaining the global proxy setting is currently impossible in the API. There is no bug requesting it, as far as I know. Can you open a new one? Here is the bug report for future reference: https://bugzilla.redhat.com/show_bug.cgi?id=1054948 Thanks! iordan -- The conscious mind has only one thread of execution. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] get VM events via API?
On 01/17/2014 04:30 PM, Sven Kieske wrote: Hi, this seems to work, but as far as I see I just get the events from the last start of the vm until now? Can the time range or the number of reported events be influenced in some way? Additionally I didn't find this function in REST-API yet. Maybe I'm looking in the wrong direction.. this doesn't work for you? https://engine-name/api/events?search=Vms.id=e6e5f31d-2aac-4170-b617-c9e0f5ec5ea0 Am 17.01.2014 14:18, schrieb Sander Grendelman: I did a quick test with ovirt-shell: # Query vm id: [oVirt shell (connected)]# list vms --query name=testvm id : 8b2ad3a2-9704-47e6-99f1-f196856d7bd5 name : plsweb02 [oVirt shell (connected)]# # List events: list events --kwargs vm-id=a82874bb-152d-4efd-952b-3f3304af7bb3 Unfortunately this uses client side filtering. REST-API / python sdk should work similarly, AFAIK ovirt-shell uses the REST-API too On Fri, Jan 17, 2014 at 1:13 PM, Sven Kieske s.kie...@mittwald.de wrote: Hi, is it possible to get the vm events via any API/CLI? I'm talking about the events tab which you can select in webadmin when you selected a vm. If this is possible, how can we get the data? We could even write a vdsm hook, if necessary, but would of course prefer REST-API. Thanks. -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Failed to invoke scheduled method gluster_async_task_poll_event
On 01/17/2014 09:31 PM, William Kwan wrote: Hi, Keep seeing this in my engine.log, any idea where does this come from? Failed to invoke scheduled method gluster_async_task_poll_event: java.lang.reflect.InvocationTargetException its mostly noise iirc. fixed in 3.4 via: http://gerrit.ovirt.org/#/c/22287/ sahina - maybe worth backporting to ovirt-engine-3.3 branch as well? I'm using 3.3.2-1.el6 with glusterfs-server-3.4.2-1.el6.x86_64 vdsm-gluster-4.13.2-1.el6.noarch 2014-01-17 14:26:11,615 ERROR [org.ovirt.engine.core.utils.timer.SchedulerUtilQuartzImpl] (DefaultQuartzScheduler_Worker-96) Failed to invoke scheduled method gluster_async_task_poll_event: java.lang.reflect.InvocationTargetException at sun.reflect.GeneratedMethodAccessor31.invoke(Unknown Source) [:1.7.0_51] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.7.0_51] at java.lang.reflect.Method.invoke(Method.java:606) [rt.jar:1.7.0_51] at org.ovirt.engine.core.utils.timer.JobWrapper.execute(JobWrapper.java:60) [scheduler.jar:] at org.quartz.core.JobRunShell.run(JobRunShell.java:213) [quartz.jar:] at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:557) [quartz.jar:] Caused by: org.ovirt.engine.core.common.errors.VdcBLLException: VdcBLLException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSNetworkException: org.apache.xmlrpc.XmlRpcException: type 'exceptions.Exception':method glusterTasksList is not supported (Failed with error VDS_NETWORK_ERROR and code 5022) at org.ovirt.engine.core.bll.VdsHandler.handleVdsResult(VdsHandler.java:122) [bll.jar:] at org.ovirt.engine.core.bll.VDSBrokerFrontendImpl.RunVdsCommand(VDSBrokerFrontendImpl.java:33) [bll.jar:] at org.ovirt.engine.core.bll.gluster.tasks.GlusterTasksService.runVdsCommand(GlusterTasksService.java:60) [bll.jar:] at org.ovirt.engine.core.bll.gluster.tasks.GlusterTasksService.getTaskListForCluster(GlusterTasksService.java:28) [bll.jar:] at org.ovirt.engine.core.bll.gluster.GlusterTasksSyncJob.updateTasksInCluster(GlusterTasksSyncJob.java:67) [bll.jar:] at org.ovirt.engine.core.bll.gluster.GlusterTasksSyncJob.updateGlusterAsyncTasks(GlusterTasksSyncJob.java:56) [bll.jar:] ... 6 more Will ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] oVirt Node ISO for oVirt 3.3 - Draft image for testing
Hi Laercio, Am Freitag, den 17.01.2014, 14:49 -0200 schrieb Laercio Motta: I tested the ISO here. Thanks for being that brave! ;) - I was able to register with the engine and aprove (thing with 'oVirt-node-3.0.1-iso-1.0.2.vdsm.el6.iso' version was not possible) Great that this works now. - Firewall: Being duplicated the rule of vdsm port (54321). - 'Sanlock' is being blocked by 'selinux' (audit.log attached) Okay, those are probably bugs we need to take care of. - NIC was messy .. :P (eth0, eth4, eth5, eth6... ).. Could you explain this a bit more? Did all NICs appear, or did to many NICs appear? Thanks fabian 2014/1/17 Fabian Deutsch fabi...@redhat.com Hey, as many of you have noticed there wasn't any well working oVirt Node ISO around for oVirt 3.3. To get this ball rolling again I've put together a draft image of ALPHA quality. It contains many fixes some of us have been working on over the last weeks. - Source ISO - To not drown Jenkins in a hell-of-a-patch-queue I've pushed the patches to https://github.com/fabiand/ovirt-node/tree/teamsync The ISO built from that patchset can be found here: http://fedorapeople.org/~fabiand/node/3.0.4/ovirt-node-iso-3.0.3-0.999.201401170926draft.vdsm.el6.iso Please test this draft image and provide feedback on how it works for you. If you encounter problems - and you probably will - please take a look here on how to debug them: http://www.ovirt.org/Node_Troubleshooting - Important Notes - SELinux: Boot this alpha image with enforcing=0 to log potential denials, but not block the calls. To fix those denials permanently please attach your /var/log/audit/audit.log to a bug in bugzilla. Known problems: - Exception is raised after registration to Engine - Many bond devices are show on network page - Denials appear in /var/log/audit/audit.log And don't hesitate to reach out to us if you want to get more involved with Node. - fabian -- ╔══╗ ║▒▒▒ Laercio da Silva Motta ▒▒▒║ ║--║ ║ Blog: http://www.laerciomotta.com/ ║ ║ Twitter: http://twitter.com/#!/laerciomasala ║ ║ Skype: laerciomasala ║ ║ Chave PGP: http://bit.ly/kXS6ga ║ ╚═v1.0═╝ signature.asc Description: This is a digitally signed message part ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] New user to oVirt, and I haz a sad so far...
On 01/17/2014 07:31 PM, Willard Dennis wrote: Uuup! :) Thanks for your assistance, Einav! Now onwards Hi Will, this should work out of the box. would help if you can open a bug on this not happening so it will be verified it does work out of the box. Thanks, Itamar Date: Fri, 17 Jan 2014 12:18:30 -0500 From: eco...@redhat.com To: willardden...@live.com CC: n...@nieuwland.nl; users@ovirt.org Subject: Re: [Users] New user to oVirt, and I haz a sad so far... go to the Network Interface sub-tab of that node and click the Setup Host Networks button. In the dialog that has opened, attach the 'ovirtmgmt' network from the right-hand side of the dialog to one of your node's NICs on the left-hand side by dragging that network onto the NIC. click OK. after a short while, your Host should become 'Up'. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] New user to oVirt, and I haz a sad so far...
On 01/17/2014 08:07 PM, Dave Neary wrote: Hi, On 01/17/2014 06:19 PM, Willard Dennis wrote: I have had success setting up CentOS 6.5 minimal in nodes, configuring network, and then adding the node through the management interface - the Engine takes care of installing configuring the nodes. Have you tried this? No, I was told by someone else (in IRC I believe) that only Fedora could be used as a node... I would much rather use EL6.5 (CentOS)... What/where is the proper RPM for this platform? That was true until during the oVirt 3.2 release cycle, but we have had an EL6 Node for a while. oVirt Node is a stripped down OS image - installing the Node packages on a minimal EL6 install has also worked since the 3.2 series. just to clarify - there are two types of hosts: - ovirt-node - stripped down, ESXi like. some workflows of deploying and updating it are simpler as its image based - normal linux - just configure the yum repos, and ovirt-engine should configure everything else. both types have fedora and .el6 support, and an ubuntu for 'normal linux' type is making progress as well. (and yes, it seems the ovirt-node one for 3.3 required a much needed set of fixes) Thanks, Itamar ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] which version?
On 01/17/2014 10:41 AM, Sven Kieske wrote: Hi, well the latest stable release is 3.3.2 3.3.3 is still in beta and 3.4 is in alpha. just wondering - which type of OS are you planning to use for the hosts? HTH Am 17.01.2014 09:21, schrieb tristan...@libero.it: Hello, i have to create a new ovirt cluster with 3 node using gluster FS, which ovirt version do you suggest ? BTW: on ovirt.org it is not clear the actually status of version… stable, testing, beta etc… i suggest a more clear page with the indication of version status, link to release note and roadmap. thanks marco ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] vlan on mgmt network
OK.. tested with bond0.102 for vlan102 I guess I can't do this with oVirt? It wouldn't pickup this interface. It still shows up eth0, eth1 and bond0 only Will On Friday, January 17, 2014 1:15 PM, William Kwan pota...@yahoo.com wrote: Thanks all for the info. I'm trying the suggestions with 3.3.2-1.el6 Assaf mentioned the following which is true. You can make ovirtmgmt a non-VM, untagged (non-VLAN) network, then placeas many VM, tagged networks as you'd like on the same NIC or bond. I tried a few things and I haven't been able to find a way through. Obviously or not, there are more facts/rules. Just put up a few of them here Cannot have more than one non-VLAN network on one interface Cannot have a non-VLAN VM network and VLAN-tagged networks on one interface. ( got this when I tried to drag a VLAN-tagged VM network on the same interface as the non-VLAN VM network). I'll try to test adding a bond0.vlan. I need to have bond0 - for both mgmt network and a vlan bond1 - for another subnet. Will On Thursday, January 16, 2014 1:50 PM, Juan Pablo Lorier jplor...@gmail.com wrote: Hi William, You can have several logical networks on the same interface. If ovirtmgmt is not a vm network you can even mix tagged and untagged networks (if not, you can't mix). You don's have to do anything besides creating the logical networks in ovirt and assign them to the interface, ovirt takes care of creating the virtual interfaces it needs. What you can't do is have more than one logical network per vlan (I think there's a feature request on this, I know I've asked it on the list:-) ). Regards,___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] vlan on mgmt network
On 01/17/2014 11:38 PM, William Kwan wrote: OK.. tested with bond0.102 for vlan102 I guess I can't do this with oVirt? It wouldn't pickup this interface. It still shows up eth0, eth1 and bond0 only you tried to define a vlan youself on the bond, or use a vlan via a logical network over the bond via ovirt-engine (which should work)? Will On Friday, January 17, 2014 1:15 PM, William Kwan pota...@yahoo.com wrote: Thanks all for the info. I'm trying the suggestions with 3.3.2-1.el6 Assaf mentioned the following which is true. You can make ovirtmgmt a non-VM, untagged (non-VLAN) network, then place as many VM, tagged networks as you'd like on the same NIC or bond. I tried a few things and I haven't been able to find a way through. Obviously or not, there are more facts/rules. Just put up a few of them here Cannot have more than one non-VLAN network on one interface Cannot have a non-VLAN VM network and VLAN-tagged networks on one interface. ( got this when I tried to drag a VLAN-tagged VM network on the same interface as the non-VLAN VM network). I'll try to test adding a bond0.vlan. I need to have bond0 - for both mgmt network and a vlan bond1 - for another subnet. Will On Thursday, January 16, 2014 1:50 PM, Juan Pablo Lorier jplor...@gmail.com wrote: Hi William, You can have several logical networks on the same interface. If ovirtmgmt is not a vm network you can even mix tagged and untagged networks (if not, you can't mix). You don's have to do anything besides creating the logical networks in ovirt and assign them to the interface, ovirt takes care of creating the virtual interfaces it needs. What you can't do is have more than one logical network per vlan (I think there's a feature request on this, I know I've asked it on the list:-) ). Regards, ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] VM Migration failed
On 01/17/2014 06:25 PM, Edgars M. wrote: Hi Meital I tried to migrate another VM and it also failed. This is what I get in UI: Migration started (VM: nophpapp01, Source: novmnode1, Destination: novmnode2, User: edgarsm). Migration failed due to Error: Fatal error during migration. Trying to migrate to another Host (VM: nophpapp01, Source: novmnode1, Destination: novmnode2). Migration failed due to Error: Fatal error during migration (VM: nophpapp01, Source: novmnode1, Destination: novmnode2). There is nothing in /var/log/messages, neither on engine server nor nodes. See attachments for engine and vdsm logs. (I am migrating from vmnode1 to vmnode2) whatever the issue is here, can you please open a bug on trying to return more info to user on the migration error itself (for easier troubleshooting). thanks, Itamar Thanks for the help Edgars On Fri, Jan 17, 2014 at 4:46 PM, Meital Bourvine mbour...@redhat.com mailto:mbour...@redhat.com wrote: Which error are you getting in the UI? Can you please attach the full engine and vdsm logs? Also, please check if there is a relevant error in /var/log/messages *From: *Edgars M. edgars.maz...@gmail.com mailto:edgars.maz...@gmail.com *To: *users@ovirt.org mailto:users@ovirt.org *Sent: *Friday, January 17, 2014 3:42:37 PM *Subject: *[Users] VM Migration failed Hi I am experiencing issues with manual VM migration. VM fails to migrate to other node in the same Cluster. Here are some relevant engine.log entries: ERROR [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (DefaultQuartzScheduler_Worker-73) Rerun vm a31cfd62-26fc-4396-8a83-1aed68c7fd39. Called from vds novmnode1 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateStatusVDSCommand] (pool-6-thread-49) Failed in MigrateStatusVDS method ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateStatusVDSCommand] (pool-6-thread-49) Error code migrateErr and error message VDSGenericException: VDSErrorException: Failed to MigrateStatusVDS, error = Fatal error during migration ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateStatusVDSCommand] (pool-6-thread-49) Command MigrateStatusVDS execution failed. Exception: VDSErrorException: VDSGenericException: VDSErrorException: Failed to MigrateStatusVDS, error = Fatal error during migration Both Engine and Node are running CentOS 6.5 x64. oVirt Engine Version: 3.3.2-1.el6. VDSM version 4.13.2-1. I restarted engine and vdsm, that did not help. Also in vdsm log file I see the following errors related to the same VM ID: Thread-27::ERROR::2014-01-17 16:37:06,271::sampling::355::vm.Vm::(collect) vmId=`a31cfd62-26fc-4396-8a83-1aed68c7fd39`::Stats function failed: AdvancedStatsFunction _highWrite at 0x26efb58 Any hints? BR Edgars ___ Users mailing list Users@ovirt.org mailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] engine reports and dwh setup in 3.3.2
On 01/17/2014 12:50 PM, Sandro Bonazzola wrote: Il 17/01/2014 11:40, Gianluca Cecchi ha scritto: On Thu, Jan 16, 2014 at 5:55 PM, Yaniv Dary wrote: I think a this point it is safe to install. If I can go, can I use https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise_Virtualization/3.3-Beta/html/Installation_Guide/Installing_and_Configuring_the_History_Database.html as a workflow input? (with changes where needed, as rhevm-dwh -- ovirt-engine-dwh) You can try it, but not sure everything will be applicable. Let me know so that I can try Gianluca dwh part went ok and ovirt_engine_history db was created. The reports part got error # ovirt-engine-reports-setup Welcome to ovirt-engine-reports setup utility In order to proceed the installer must stop the ovirt-engine service Would you like to stop the ovirt-engine service (yes|no): yes Stopping ovirt-engine... [ DONE ] Editing XML files... [ DONE ] Setting DB connectivity...[ DONE ] Please choose a password for the reports admin user(s) (ovirt-admin): Warning: Weak Password. Retype password: Warning: Weak Password. Deploying Server... [ DONE ] Updating Redirect Servlet... [ DONE ] Importing reports... [ DONE ] Customizing Server... [ DONE ] global name 'preserveReportsJobs' is not defined Error encountered while installing ovirt-engine-reports, please consult the log file: /var/log/ovirt-engine/ovirt-engine-reports-setup-2014_01_17_11_20_29.log It seems the main point in log file, as in standard output is this: 2014-01-17 11:22:22::ERROR::ovirt-engine-reports-setup::1196::root:: Failed to complete the setup of the reports package! 2014-01-17 11:22:22::DEBUG::ovirt-engine-reports-setup::1197::root:: Traceback (most recent call last): File /bin/ovirt-engine-reports-setup, line 1163, in main if preserveReportsJobs: NameError: global name 'preserveReportsJobs' is not defined This has been fixed yesterday http://gerrit.ovirt.org/#/c/23304/ this is only merged in master. yaniv - which version is going to 3.3.3 - the otopi one? Let me know if you need full logs or if this is sufficient to debug code and propose a solution to try then again. Gianluca ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] iSCSI storage domain.
On 01/17/2014 11:32 AM, Gianluca Cecchi wrote: On Fri, Jan 17, 2014 at 10:25 AM, Elad Ben Aharon wrote: Indeed, Using ovirt-engine APIs you can edit your iSCSI storage domain and extend it by adding physical volumes from your shared storage (The process is managed by ovirt-engine, the actual actions on your storage are done by your host which has VDSM installed on). - Original Message - From: Hans Emmanuel hansemman...@gmail.com To: Elad Ben Aharon ebena...@redhat.com Cc: users@ovirt.org Sent: Friday, January 17, 2014 6:37:56 AM Subject: Re: [Users] iSCSI storage domain. Thanks for the reply . Are you suggesting to use Ovirt Engine to resize iSCSI storage domain ? On Thu, Jan 16, 2014 at 7:11 PM, Elad Ben Aharon ebena...@redhat.comwrote: Hi, Both storage types are suitable for production setup. As for your second question - manually LVM resizing is not recommended, why not using RHEVM for that? - Original Message - From: Hans Emmanuel hansemman...@gmail.com To: users@ovirt.org Sent: Thursday, January 16, 2014 3:30:39 PM Subject: Re: [Users] iSCSI storage domain. Could any one please give valuable suggestions? On 16-Jan-2014 12:28 PM, Hans Emmanuel hansemman...@gmail.com wrote: Hi all, I would like to get some comparison on NFS iSCSI storage domain . Which one more suitable for a production setup ? I am planning to use LVM backed DRBD replication . And also is that possible to expand iSCSI storage domain by simply resizing backend LVM ? -- Hans Emmanuel I think one option should be to provide the user, if not already present/tested/supported, the opportunity to resize the LUN on storage array and then run a rescan from oVIrt to see the new size and use it without disruption of service. 3.4 adds this: Bug 961532 - [RFE] Update storage domain's LUNs sizes in DB after lun resize please note: - you can extend a *storage domain* by adding an extra LUN to it from ovirt-engine. - you *cannot* resize the LUN from ovirt-engine, but you can do that from the storage side, which in 3.4 will be reported by ovirt-engine via bug 961532 and on the general question - what i like about NFS is its way more simple to work with, troubleshoot, inject and recover on issues. also note, on iscsi, LVM has issues on scale once you pass a several hundreds of disks or snapshots (per storage domain). To avoid also LUNs proliferation on storage arrays that in general are providing storage to many sources, also different from oVirt itself Gianluca ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] vlan on mgmt network
I tried to define a virtual interface for vlan102, by adding ifcfg-bond0.102 manually and restarted network services. On Friday, January 17, 2014 4:45 PM, Itamar Heim ih...@redhat.com wrote: On 01/17/2014 11:38 PM, William Kwan wrote: OK.. tested with bond0.102 for vlan102 I guess I can't do this with oVirt? It wouldn't pickup this interface. It still shows up eth0, eth1 and bond0 only you tried to define a vlan youself on the bond, or use a vlan via a logical network over the bond via ovirt-engine (which should work)? Will On Friday, January 17, 2014 1:15 PM, William Kwan pota...@yahoo.com wrote: Thanks all for the info. I'm trying the suggestions with 3.3.2-1.el6 Assaf mentioned the following which is true. You can make ovirtmgmt a non-VM, untagged (non-VLAN) network, then place as many VM, tagged networks as you'd like on the same NIC or bond. I tried a few things and I haven't been able to find a way through. Obviously or not, there are more facts/rules. Just put up a few of them here Cannot have more than one non-VLAN network on one interface Cannot have a non-VLAN VM network and VLAN-tagged networks on one interface. ( got this when I tried to drag a VLAN-tagged VM network on the same interface as the non-VLAN VM network). I'll try to test adding a bond0.vlan. I need to have bond0 - for both mgmt network and a vlan bond1 - for another subnet. Will On Thursday, January 16, 2014 1:50 PM, Juan Pablo Lorier jplor...@gmail.com wrote: Hi William, You can have several logical networks on the same interface. If ovirtmgmt is not a vm network you can even mix tagged and untagged networks (if not, you can't mix). You don's have to do anything besides creating the logical networks in ovirt and assign them to the interface, ovirt takes care of creating the virtual interfaces it needs. What you can't do is have more than one logical network per vlan (I think there's a feature request on this, I know I've asked it on the list:-) ). Regards, ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] vlan on mgmt network
On 01/18/2014 12:05 AM, William Kwan wrote: I tried to define a virtual interface for vlan102, by adding ifcfg-bond0.102 manually and restarted network services. why not via ovirt-engine? On Friday, January 17, 2014 4:45 PM, Itamar Heim ih...@redhat.com wrote: On 01/17/2014 11:38 PM, William Kwan wrote: OK.. tested with bond0.102 for vlan102 I guess I can't do this with oVirt? It wouldn't pickup this interface. It still shows up eth0, eth1 and bond0 only you tried to define a vlan youself on the bond, or use a vlan via a logical network over the bond via ovirt-engine (which should work)? Will On Friday, January 17, 2014 1:15 PM, William Kwan pota...@yahoo.com mailto:pota...@yahoo.com wrote: Thanks all for the info. I'm trying the suggestions with 3.3.2-1.el6 Assaf mentioned the following which is true. You can make ovirtmgmt a non-VM, untagged (non-VLAN) network, then place as many VM, tagged networks as you'd like on the same NIC or bond. I tried a few things and I haven't been able to find a way through. Obviously or not, there are more facts/rules. Just put up a few of them here Cannot have more than one non-VLAN network on one interface Cannot have a non-VLAN VM network and VLAN-tagged networks on one interface. ( got this when I tried to drag a VLAN-tagged VM network on the same interface as the non-VLAN VM network). I'll try to test adding a bond0.vlan. I need to have bond0 - for both mgmt network and a vlan bond1 - for another subnet. Will On Thursday, January 16, 2014 1:50 PM, Juan Pablo Lorier jplor...@gmail.com mailto:jplor...@gmail.com wrote: Hi William, You can have several logical networks on the same interface. If ovirtmgmt is not a vm network you can even mix tagged and untagged networks (if not, you can't mix). You don's have to do anything besides creating the logical networks in ovirt and assign them to the interface, ovirt takes care of creating the virtual interfaces it needs. What you can't do is have more than one logical network per vlan (I think there's a feature request on this, I know I've asked it on the list:-) ). Regards, ___ Users mailing list Users@ovirt.org mailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] VM Migration failed
I opened a bug about missing info in UI: https://bugzilla.redhat.com/show_bug.cgi?id=1054994 It actually failed with this error: Thread-1417::DEBUG::2014-01-17 17:01:28,344::vm::768::vm.Vm::(run) vmId=`b8787906-187a-4234-a0c9-58fc4ddf2a57`::starting migration monitor thread Thread-1415::DEBUG::2014-01-17 17:01:28,409::libvirtconnection::108::libvirtconnection::(wrapper) Unknown libvirterror: ecode: 38 edom: 42 level: 2 message: Failed to inquire lock: No such process Thread-1415::DEBUG::2014-01-17 17:01:28,409::vm::745::vm.Vm::(cancel) vmId=`b8787906-187a-4234-a0c9-58fc4ddf2a57`::canceling migration downtime thread Thread-1415::DEBUG::2014-01-17 17:01:28,409::vm::815::vm.Vm::(stop) vmId=`b8787906-187a-4234-a0c9-58fc4ddf2a57`::stopping migration monitor thread Thread-1416::DEBUG::2014-01-17 17:01:28,409::vm::742::vm.Vm::(run) vmId=`b8787906-187a-4234-a0c9-58fc4ddf2a57`::migration downtime thread exiting Thread-1415::ERROR::2014-01-17 17:01:28,410::vm::238::vm.Vm::(_recover) vmId=`b8787906-187a-4234-a0c9-58fc4ddf2a57`::Failed to inquire lock: No such process Thread-1415::ERROR::2014-01-17 17:01:28,619::vm::337::vm.Vm::(run) vmId=`b8787906-187a-4234-a0c9-58fc4ddf2a57`::Failed to migrate Traceback (most recent call last): File /usr/share/vdsm/vm.py, line 323, in run self._startUnderlyingMigration() File /usr/share/vdsm/vm.py, line 400, in _startUnderlyingMigration None, maxBandwidth) File /usr/share/vdsm/vm.py, line 838, in f ret = attr(*args, **kwargs) File /usr/lib64/python2.6/site-packages/vdsm/libvirtconnection.py, line 76, in wrapper ret = f(*args, **kwargs) File /usr/lib64/python2.6/site-packages/libvirt.py, line 1178, in migrateToURI2 if ret == -1: raise libvirtError ('virDomainMigrateToURI2() failed', dom=self) libvirtError: Failed to inquire lock: No such process Thread-26::ERROR::2014-01-17 17:01:28,917::sampling::355::vm.Vm::(collect) vmId=`b8787906-187a-4234-a0c9-58fc4ddf2a57`::Stats function failed: AdvancedStatsFunction _highWrite at 0x26efb58 The problem is that it doesn't say which process... - Original Message - From: Itamar Heim ih...@redhat.com To: Edgars M. edgars.maz...@gmail.com, Meital Bourvine mbour...@redhat.com Cc: users@ovirt.org, Michal Skrivanek mskri...@redhat.com Sent: Friday, January 17, 2014 9:47:11 PM Subject: Re: [Users] VM Migration failed On 01/17/2014 06:25 PM, Edgars M. wrote: Hi Meital I tried to migrate another VM and it also failed. This is what I get in UI: Migration started (VM: nophpapp01, Source: novmnode1, Destination: novmnode2, User: edgarsm). Migration failed due to Error: Fatal error during migration. Trying to migrate to another Host (VM: nophpapp01, Source: novmnode1, Destination: novmnode2). Migration failed due to Error: Fatal error during migration (VM: nophpapp01, Source: novmnode1, Destination: novmnode2). There is nothing in /var/log/messages, neither on engine server nor nodes. See attachments for engine and vdsm logs. (I am migrating from vmnode1 to vmnode2) whatever the issue is here, can you please open a bug on trying to return more info to user on the migration error itself (for easier troubleshooting). thanks, Itamar Thanks for the help Edgars On Fri, Jan 17, 2014 at 4:46 PM, Meital Bourvine mbour...@redhat.com mailto:mbour...@redhat.com wrote: Which error are you getting in the UI? Can you please attach the full engine and vdsm logs? Also, please check if there is a relevant error in /var/log/messages *From: *Edgars M. edgars.maz...@gmail.com mailto:edgars.maz...@gmail.com *To: *users@ovirt.org mailto:users@ovirt.org *Sent: *Friday, January 17, 2014 3:42:37 PM *Subject: *[Users] VM Migration failed Hi I am experiencing issues with manual VM migration. VM fails to migrate to other node in the same Cluster. Here are some relevant engine.log entries: ERROR [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (DefaultQuartzScheduler_Worker-73) Rerun vm a31cfd62-26fc-4396-8a83-1aed68c7fd39. Called from vds novmnode1 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateStatusVDSCommand] (pool-6-thread-49) Failed in MigrateStatusVDS method ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateStatusVDSCommand] (pool-6-thread-49) Error code migrateErr and error message VDSGenericException: VDSErrorException: Failed to MigrateStatusVDS, error = Fatal error during migration ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateStatusVDSCommand] (pool-6-thread-49) Command MigrateStatusVDS execution failed. Exception: VDSErrorException:
Re: [Users] VM Migration failed
On 01/18/2014 12:07 AM, Meital Bourvine wrote: I opened a bug about missing info in UI: https://bugzilla.redhat.com/show_bug.cgi?id=1054994 It actually failed with this error: Thread-1417::DEBUG::2014-01-17 17:01:28,344::vm::768::vm.Vm::(run) vmId=`b8787906-187a-4234-a0c9-58fc4ddf2a57`::starting migration monitor thread Thread-1415::DEBUG::2014-01-17 17:01:28,409::libvirtconnection::108::libvirtconnection::(wrapper) Unknown libvirterror: ecode: 38 edom: 42 level: 2 message: Failed to inquire lock: No such process Thread-1415::DEBUG::2014-01-17 17:01:28,409::vm::745::vm.Vm::(cancel) vmId=`b8787906-187a-4234-a0c9-58fc4ddf2a57`::canceling migration downtime thread Thread-1415::DEBUG::2014-01-17 17:01:28,409::vm::815::vm.Vm::(stop) vmId=`b8787906-187a-4234-a0c9-58fc4ddf2a57`::stopping migration monitor thread Thread-1416::DEBUG::2014-01-17 17:01:28,409::vm::742::vm.Vm::(run) vmId=`b8787906-187a-4234-a0c9-58fc4ddf2a57`::migration downtime thread exiting Thread-1415::ERROR::2014-01-17 17:01:28,410::vm::238::vm.Vm::(_recover) vmId=`b8787906-187a-4234-a0c9-58fc4ddf2a57`::Failed to inquire lock: No such process Thread-1415::ERROR::2014-01-17 17:01:28,619::vm::337::vm.Vm::(run) vmId=`b8787906-187a-4234-a0c9-58fc4ddf2a57`::Failed to migrate Traceback (most recent call last): File /usr/share/vdsm/vm.py, line 323, in run self._startUnderlyingMigration() File /usr/share/vdsm/vm.py, line 400, in _startUnderlyingMigration None, maxBandwidth) File /usr/share/vdsm/vm.py, line 838, in f ret = attr(*args, **kwargs) File /usr/lib64/python2.6/site-packages/vdsm/libvirtconnection.py, line 76, in wrapper ret = f(*args, **kwargs) File /usr/lib64/python2.6/site-packages/libvirt.py, line 1178, in migrateToURI2 if ret == -1: raise libvirtError ('virDomainMigrateToURI2() failed', dom=self) libvirtError: Failed to inquire lock: No such process Thread-26::ERROR::2014-01-17 17:01:28,917::sampling::355::vm.Vm::(collect) vmId=`b8787906-187a-4234-a0c9-58fc4ddf2a57`::Stats function failed: AdvancedStatsFunction _highWrite at 0x26efb58 The problem is that it doesn't say which process... this looks like noise post the migration failing, with probably a more relevant error in libvirt log - Original Message - From: Itamar Heim ih...@redhat.com To: Edgars M. edgars.maz...@gmail.com, Meital Bourvine mbour...@redhat.com Cc: users@ovirt.org, Michal Skrivanek mskri...@redhat.com Sent: Friday, January 17, 2014 9:47:11 PM Subject: Re: [Users] VM Migration failed On 01/17/2014 06:25 PM, Edgars M. wrote: Hi Meital I tried to migrate another VM and it also failed. This is what I get in UI: Migration started (VM: nophpapp01, Source: novmnode1, Destination: novmnode2, User: edgarsm). Migration failed due to Error: Fatal error during migration. Trying to migrate to another Host (VM: nophpapp01, Source: novmnode1, Destination: novmnode2). Migration failed due to Error: Fatal error during migration (VM: nophpapp01, Source: novmnode1, Destination: novmnode2). There is nothing in /var/log/messages, neither on engine server nor nodes. See attachments for engine and vdsm logs. (I am migrating from vmnode1 to vmnode2) whatever the issue is here, can you please open a bug on trying to return more info to user on the migration error itself (for easier troubleshooting). thanks, Itamar Thanks for the help Edgars On Fri, Jan 17, 2014 at 4:46 PM, Meital Bourvine mbour...@redhat.com mailto:mbour...@redhat.com wrote: Which error are you getting in the UI? Can you please attach the full engine and vdsm logs? Also, please check if there is a relevant error in /var/log/messages *From: *Edgars M. edgars.maz...@gmail.com mailto:edgars.maz...@gmail.com *To: *users@ovirt.org mailto:users@ovirt.org *Sent: *Friday, January 17, 2014 3:42:37 PM *Subject: *[Users] VM Migration failed Hi I am experiencing issues with manual VM migration. VM fails to migrate to other node in the same Cluster. Here are some relevant engine.log entries: ERROR [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (DefaultQuartzScheduler_Worker-73) Rerun vm a31cfd62-26fc-4396-8a83-1aed68c7fd39. Called from vds novmnode1 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateStatusVDSCommand] (pool-6-thread-49) Failed in MigrateStatusVDS method ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateStatusVDSCommand] (pool-6-thread-49) Error code migrateErr and error message VDSGenericException: VDSErrorException: Failed to MigrateStatusVDS, error = Fatal error during migration ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateStatusVDSCommand] (pool-6-thread-49) Command MigrateStatusVDS
Re: [Users] What's the correct way to upload a VM ISO image?
On 01/16/2014 08:38 PM, Joop wrote: David Li wrote: What you described makes sense to me! Now I tried the second time after rebooting everything: engine-iso-uploader upload -v -i ISO_DOMAIN CentOS-6.4-x86_64-netinstall.iso It could be me, but doesn't engine-iso-uploader ask for the admin password to be able to upload? but how are you going to input that with the '' at the end of your commandline? I bet if you do ps -ef | grep engine-iso you will find you process still waiting for you to type the password. actually no. it asks for the admin password to get the nfs path from ovirt-engine (if you just give the domain name), and to ask the engine to refresh the iso domain (which would happen after 5 minutes as well). you can upload iso images without the engine password as well if you use the full nfs path. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] vlan on mgmt network
On 01/16/2014 08:35 PM, Assaf Muller wrote: Ok so if you want to set the management network (untagged) and VM networks (tagged) on the same bond, then the management network has to be non-VM. IE: You won't be able to connect instances to the management network. William - did this work for you followin assaf steps below? you don't need to change anything at host level, all should be done from the webadmin Assaf Muller, Cloud Networking Engineer Red Hat - Original Message - From: William Kwan pota...@yahoo.com To: Assaf Muller amul...@redhat.com Cc: users@ovirt.org, Christian Hernandez christi...@4over.com Sent: Thursday, January 16, 2014 7:59:46 PM Subject: Re: [Users] vlan on mgmt network Assaf, Thanks a lot. Will I be able to mix tagged and untagged traffic? Example: - bond0 on my two systems are on the management network, untagged - my VMs all have one connection to this management network - I want to setup a new VM with two interfaces, one on the management network, one on the tagged VLAN This will work it out? Thanks Will On Thursday, January 16, 2014 12:26 PM, Assaf Muller amul...@redhat.com wrote: You can make ovirtmgmt a non-VM, untagged (non-VLAN) network, then place as many VM, tagged networks as you'd like on the same NIC or bond. Here's a working upgrade procedure: 1) Edit ovirtmgmt, mark it as non-VM. 2) Go to all hosts using this network, select Setup Host Networks. You'll see that ovirtmgmt is out of sync. Edit the network and mark sync. Hit ok on the dialog of course :) Step 2 will be done for you automatically when you edit logical networks in oVirt 3.4 3) Create VM, VLAN networks 4) Go to all hosts you wish to place those networks, and drag the new VLAN networks on bond0. You don't need to do any prep work on your hosts before this procedure. oVirt will take care of this stuff for you. Assaf Muller, Cloud Networking Engineer Red Hat - Original Message - From: Christian Hernandez christi...@4over.com To: William Kwan pota...@yahoo.com Cc: users@ovirt.org Sent: Thursday, January 16, 2014 6:36:49 PM Subject: Re: [Users] vlan on mgmt network Assuming it's on the same VLAN... I would make the subinterface (i.e. bond0.1) Thank you, Christian Hernandez 1225 Los Angeles Street Glendale, CA 91204 Phone: 877-782-2737 ext. 4566 Fax: 818-265-3152 christi...@4over.com mailto: christi...@4over.com www.4over.com http://www.4over.com On Thu, Jan 16, 2014 at 8:31 AM, William Kwan pota...@yahoo.com wrote: Hi all, CentOS 6.5 and oVirt 3.3 Let's say I have bond0 (eth0 and eth1) on a management network. Logical network ovirtmgmt is set and working on top of Interfaces bond0. Is it possible to have another Logical network, e.g. ovirt777, on the same Interface bond0? Or I should add a virtual interface, e.g. bond0.1, tie it to VLAN 777 and create logical network with this virtual interface? Wil ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Register a disk image via oVirt REST api
On 01/16/2014 07:21 PM, Satya Vempati wrote: I have a disk image (i.e. a file) that I want to register as a disk using the REST API. The REST API works with existing disks, but does the API work with disk images? can you pleas explain what do you mean by an image compared to a disk? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Blank VM Install Console
This time I tried to use spice html5 browser client. I downloaded the cert from http://my-engine/ovirt-engine/ca.crt. This time the console window spice javascript client showed up in the firefox (24.2.0) but it stays gray. Nothing can be seen. So what else am I missing here? - Original Message - From: Michal Skrivanek michal.skriva...@redhat.com To: David Li david...@sbcglobal.net Cc: Meital Avital mavi...@redhat.com; Einav Cohen eco...@redhat.com; Omer Frenkel ofren...@redhat.com; users@ovirt.org List users@ovirt.org; d...@redhat.com Ron d...@redhat.com Sent: Friday, January 17, 2014 1:12 AM Subject: Re: [Users] Blank VM Install Console On Jan 17, 2014, at 09:59 , Dafna Ron d...@redhat.com wrote: well, I have to admit that it has been a while since I tried logging in to a vm console from a Windows OS :) Adding some people to this which I think can help more than me... On 01/17/2014 12:58 AM, David Li wrote: Well, it didn't even have any traces to tell me if it's installed. I am supposed to see these according to the instruction but none of them showed up. * IE will prompt you with This website wants to install the following add-on SpiceX.cab... proceed by clicking the arrow on the install button and choose Install for All Users of this computer. * Depending on the version of IE a UAC dialog may pop up asking you if you want to allow SpiceX.cab If it does not Click on the install spice button again and it will. * In the UAC dialog click on the yes button. * The install will now proceed in the background. I am using W7 64bit with IE11. My engine is running on a RHEL6 machine. IE11 doesn't really work as of now. Try some more reasonable browser, IE10 would be also fine. activex setup requires some manual work as mentione at How_to_Connect_to_SPICE_Console_With_Portal wiki native invocation (that file to download you got) is easier, just associate with recent remote viewer and it should open it works on Windows, Linux and OSX (needs https://github.com/brianwcook/launchvv in addition) check out http://www.ovirt.org/Console_Client_Resources Thanks, mcihal - Original Message - From: Dafna Ron d...@redhat.com To: David Li david...@sbcglobal.net Cc: Madhav V Diwan mdi...@diwanconsulting.com; users@ovirt.org users@ovirt.org Sent: Thursday, January 16, 2014 4:16 PM Subject: Re: [Users] Blank VM Install Console 1. did you restart you're firefox after install? 2. what OS are you using? On 01/16/2014 11:40 PM, David Li wrote: This isn't working for me at this time. I have gone to the end of the instructions and clicked on Install Spice button in IE but nothing happened. Maybe someone with more knowledge should come out and make clarifications. - Original Message - From: Madhav V Diwan mdi...@diwanconsulting.com To: David Li david...@sbcglobal.net Cc: users@ovirt.org users@ovirt.org Sent: Thursday, January 16, 2014 1:51 PM Subject: Re: [Users] Blank VM Install Console yuck i dont know why they do not just have this already done in an rpm yes it probably works , i have not tested it , but virt-viewer is deprecated in favor of the newer Remote-Viewer by the way worst comes to worst you can always connect to the ovirt vm node server via virt-manager gui in linux .. or using macports virt-manager in OSX and as long as you have a username and password set up in libvirt password db /etc/libvirt/passwd.db use saslpasswd2 -a libvirt $USER on your ovirt vm host node to add your user account so you dont mess with ovirt's if you have winaxe or some other Xwindows on your windows machine you could probably just ssh with putty.exe to your ovirt node server and run virt-manager from there while displaying back to your windows desktop -Original Message- From: David Li david...@sbcglobal.net Reply-to: David Li david...@sbcglobal.net To: Madhav V Diwan mdi...@diwanconsulting.com Cc: users@ovirt.org users@ovirt.org Subject: Re: [Users] Blank VM Install Console Date: Thu, 16 Jan 2014 13:35:02 -0800 (PST) Is this page still applicable to ovirt 3.3.2? http://wiki.ovirt.org/How_to_Connect_to_SPICE_Console_With_Portal#Add_a_deployment_method_Server_Side - Original Message - From: Madhav V Diwan mdi...@diwanconsulting.com To: David Li david...@sbcglobal.net Cc: users@ovirt.org users@ovirt.org Sent: Thursday, January 16, 2014 1:28 PM Subject: Re: [Users] Blank VM Install Console install them wherever your firefox browser is installed... whichever machine you are using to browse to the portal from unfortunately i believe ovirts' spice viewing only works on linux desktops running firefox currently also the ovirt vnc
Re: [Users] engine reports and dwh setup in 3.3.2
On Fri, Jan 17, 2014 at 12:10 PM, Gianluca Cecchi wrote: engine web admin available and reportsportal too but the password set up during first broken install for ovirt-admin user doesn't work Invalid credentials supplied. Could not login to JasperReports Server. Any hints on how to solve? Manually change in Postgres? Ok, digging into /bin/ovirt-engine-reports-setup I see that actually the password is written in clear text inside file /usr/share/ovirt-engine-reports/reports/users/ovirt-002dadmin.xml Not a great security choice, also because the file is currently readable by everyone on the system (and rpm -qVv doesn't complain about its permissions). I was then able to connect to reports portal and to see some output reports... Gianluca ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Ovirt in the cloud
On 01/16/2014 05:02 PM, Jorick Astrego wrote: Hi Rob, Short answer, it really depends on your provider. But generally using a single good provider makes life easier and cheaper. I just had a client where we failed to implement any high available vm platform due to the way they had set up their uplinks. We had to use an api to do ip address failover but even then it was not possible to move a subnet to a different machine. KVM/IMPI/DRAC was not possible and no fencing devices available. Long answer you have to think about all the things just like you would when building the cloud on your own hardware Things you have to consider: * What kind of storage will you use local/glusterfs, iSCSI SAN, NFS and how will this be connected to the nodes * How will you synchronize the storage between multiple providers/datacenter? What kind of interconnect will you have between providers? What will this cost me (not cheap!!!)? * What kind of interconnect is available between nodes * How will you manage ip failover between providers (BGP, multicast, ?) * What kind of connection do you have between the management server and the ovirt nodes (ipsec, openvpn,dedicated line, * What are my SPOF's (Single Point Of Faillure) * What kind of fencing devices are available * Do the different providers have the same setup or is the hardware different (predictability of performance)? * Will you have to share infrastructure with other clients? * What is your maximum acceptable failover/migration time between providers? * I can go on for a couple of pages Kind regards, Jorick Astrego Netbulae B.V. On Thu, 2014-01-16 at 08:44 -0500, Rob Abshear wrote: Is it possible to use leased dedicated servers as ovirt nodes? In my mind it seems likely, but input from the community would be appreciated. I'm envisioning a controller node running on a dedicated server leased from a provider and multiple compute nodes running on several different providers spread out over the net. I don't require any migration capability for the purposes of this. I manage a large farm of servers, and if this works like I think it would, I believe it would speed up deployment of new servers and also provide a better central management platform. If this is possible, what would be the requirements, pitfalls, etc.? Thanks in advance. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users if using single hosts in each site, only local storage seems relevant (which is supported by ovirt - you can have a single ovirt engine managing mulitple remote clusters. a cluster could be a single host with local storage. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Windows guest
On 01/16/2014 04:22 PM, Maurice James wrote: Does anyone know if directdraw/directx works on windows guests in Ovirt? adding spice devel ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Engine installation issue
On 01/16/2014 11:45 AM, Frank Wall wrote: On Thu, Jan 16, 2014 at 12:26:37PM +0500, Nauman Abbas wrote: For some reason, the password I put during installation is not working. I've tried the following combinations No reason to use trial and error here. There's always the excellent RHEV REST API Guide to the rescue: https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise_Virtualization/3.0/html-single/REST_API_Guide/index.html#sect-REST_API_Guide-Authentication-HTTP Nauman - was this resolved? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Blank VM Install Console
On 17 Jan 2014, at 23:38, Itamar Heim ih...@redhat.com wrote: On 01/18/2014 12:30 AM, David Li wrote: This time I tried to use spice html5 browser client. I downloaded the cert from http://my-engine/ovirt-engine/ca.crt. This time the console window spice javascript client showed up in the firefox (24.2.0) but it stays gray. Nothing can be seen. So what else am I missing here? just to rule out things: - is the geust working correctly for you (ssh?) - does it happen to consume 100% cpu? - does vnc work for you correctly for this guest? During install, are you sure you said yes to install websocket proxy? Thanks, michal - Original Message - From: Michal Skrivanek michal.skriva...@redhat.com To: David Li david...@sbcglobal.net Cc: Meital Avital mavi...@redhat.com; Einav Cohen eco...@redhat.com; Omer Frenkel ofren...@redhat.com; users@ovirt.org List users@ovirt.org; d...@redhat.com Ron d...@redhat.com Sent: Friday, January 17, 2014 1:12 AM Subject: Re: [Users] Blank VM Install Console On Jan 17, 2014, at 09:59 , Dafna Ron d...@redhat.com wrote: well, I have to admit that it has been a while since I tried logging in to a vm console from a Windows OS :) Adding some people to this which I think can help more than me... On 01/17/2014 12:58 AM, David Li wrote: Well, it didn't even have any traces to tell me if it's installed. I am supposed to see these according to the instruction but none of them showed up. * IE will prompt you with This website wants to install the following add-on SpiceX.cab... proceed by clicking the arrow on the install button and choose Install for All Users of this computer. * Depending on the version of IE a UAC dialog may pop up asking you if you want to allow SpiceX.cab If it does not Click on the install spice button again and it will. * In the UAC dialog click on the yes button. * The install will now proceed in the background. I am using W7 64bit with IE11. My engine is running on a RHEL6 machine. IE11 doesn't really work as of now. Try some more reasonable browser, IE10 would be also fine. activex setup requires some manual work as mentione at How_to_Connect_to_SPICE_Console_With_Portal wiki native invocation (that file to download you got) is easier, just associate with recent remote viewer and it should open it works on Windows, Linux and OSX (needs https://github.com/brianwcook/launchvv in addition) check out http://www.ovirt.org/Console_Client_Resources Thanks, mcihal - Original Message - From: Dafna Ron d...@redhat.com To: David Li david...@sbcglobal.net Cc: Madhav V Diwan mdi...@diwanconsulting.com; users@ovirt.org users@ovirt.org Sent: Thursday, January 16, 2014 4:16 PM Subject: Re: [Users] Blank VM Install Console 1. did you restart you're firefox after install? 2. what OS are you using? On 01/16/2014 11:40 PM, David Li wrote: This isn't working for me at this time. I have gone to the end of the instructions and clicked on Install Spice button in IE but nothing happened. Maybe someone with more knowledge should come out and make clarifications. - Original Message - From: Madhav V Diwan mdi...@diwanconsulting.com To: David Li david...@sbcglobal.net Cc: users@ovirt.org users@ovirt.org Sent: Thursday, January 16, 2014 1:51 PM Subject: Re: [Users] Blank VM Install Console yuck i dont know why they do not just have this already done in an rpm yes it probably works , i have not tested it , but virt-viewer is deprecated in favor of the newer Remote-Viewer by the way worst comes to worst you can always connect to the ovirt vm node server via virt-manager gui in linux .. or using macports virt-manager in OSX and as long as you have a username and password set up in libvirt password db /etc/libvirt/passwd.db use saslpasswd2 -a libvirt $USER on your ovirt vm host node to add your user account so you dont mess with ovirt's if you have winaxe or some other Xwindows on your windows machine you could probably just ssh with putty.exe to your ovirt node server and run virt-manager from there while displaying back to your windows desktop -Original Message- From: David Li david...@sbcglobal.net Reply-to: David Li david...@sbcglobal.net To: Madhav V Diwan mdi...@diwanconsulting.com Cc: users@ovirt.org users@ovirt.org Subject: Re: [Users] Blank VM Install Console Date: Thu, 16 Jan 2014 13:35:02 -0800 (PST) Is this page still applicable to ovirt 3.3.2? http://wiki.ovirt.org/How_to_Connect_to_SPICE_Console_With_Portal#Add_a_deployment_method_Server_Side - Original Message - From: Madhav V Diwan mdi...@diwanconsulting.com To: David Li david...@sbcglobal.net Cc: users@ovirt.org users@ovirt.org Sent: Thursday, January 16, 2014 1:28
Re: [Users] sanlock leases on VM disks
On 01/10/2014 08:44 PM, José Luis Sanz Boixader wrote: I have an oVirt testing setup with 3 hosts running for a few weeks: CentOS 6.4, oVirt 3.3.1, VDSM 4.13.0, iSCSI based storage domain. I have just realized that sanlock has no leases on VM disks, so nothing prevents vdsm/libvirt from starting a VM on two different hosts, corrupting disk data. I know that something has to go wrong on oVirt engine to do it, but I've manually forced some errors (Setting Host state to Non-Operational, VM is not responding) for a Highly available VM and oVirt engine started that VM on another host. oVirt engine was not aware, but the VM was running on two hosts. I think this is a job for libvirt/sanlock/wdmd, but libvirt is not receiving lease tags for disks when creating domains. I think it should. What's left in my config? What am I doing wrong? Thanks ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users we started introducing sanlock carefully, first to SPM nodes. in 3.4 to hosted ovirt-engine node, and looking to add it to VMs/disks as well going forward. I don't remember if we have a config option to enable this, but you can make this work via a custom hook at this point at vm/disk level, and we would love feedback on this. Thanks, Itamar ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Ovirt DR setup
On 01/09/2014 10:34 AM, Sander Grendelman wrote: No experience there but I can make some suggestions. The upcoming self-hosted engine feature I mentioned before should have built-in HA for these kind of situations. http://www.ovirt.org/Features/Self_Hosted_Engine Another option: AFAIK oVirt engine configuration is all in the database, configure it with an external DB and use postgres replication to have a warm standby DB on your secondary location, combine this with some kind of (rsync?) replication of OS/configuration. so you could place the hosted engine vm on gluster, exposed via NFS. *but* i suggest doing some testing on how a VM like ovirt engine behaves with geo-replication On Thu, Jan 9, 2014 at 9:15 AM, Hans Emmanuel hansemman...@gmail.com wrote: Thanks for your reply . Yes we can replicate storage data with Gluster geo replication . Then what should be strategy for replicating Ovirt Engine confs and db ? On Thu, Jan 9, 2014 at 1:34 PM, Sander Grendelman san...@grendelman.com wrote: Depending on the bandwidth/latency between the locations you could go for replicated GlusterFS strorage and make sure that data is replicated accross both sites. There is a self-hosted engine feature coming up, I don't know how that will fit into replication. On Thu, Jan 9, 2014 at 6:04 AM, Hans Emmanuel hansemman...@gmail.com wrote: Could any one please give me some suggestions ? On Wed, Jan 8, 2014 at 11:39 AM, Hans Emmanuel hansemman...@gmail.com wrote: Hi all , I would like to know about the possibility of setup Disaster Recovery Site (DR) for an Ovirt cluster . i.e if site 1 goes down I need to trigger the site 2 to come in to action with the minimal down time . I am open to use NFS shared storage or local storage for data storage domain . I know we need to replicate the storage domain and Ovirt confs and DB across the sites , but couldn't find any doc for the same , isn't that possible with Ovirt ? Hans Emmanuel NOthing to FEAR but something to FEEL.. -- Hans Emmanuel NOthing to FEAR but something to FEEL.. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Hans Emmanuel NOthing to FEAR but something to FEEL.. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users