Re: vpopmail-4-9.10 and mysql-2.23.22
It seems like your vpopmail programs could not connect to your mysql server. Did you read README.mysql? You have to put the connection parameters into vmysql.h BEFORE compiling vpopmail. Faruque At 08:44 PM 6/29/01 +, [EMAIL PROTECTED] wrote: >Hi ! > >I'm running vpopmail and mysql on redhat 7.0 when i adding a domain or >a user with vadddomain i get this error message : >could not connect to mysql server >could not create dir control table create table dir_control ( bla bla bla) >vsql_getpw:failed select >MySQL SERVER HAS GONE >MySQL ADDUSER FAILED. > > >_ > >AVISO ! Le meilleur de l'Internet - http://www.aviso.ci/
vpopmail-4-9.10 and mysql-2.23.22
Hi ! I'm running vpopmail and mysql on redhat 7.0 when i adding a domain or a user with vadddomain i get this error message : could not connect to mysql server could not create dir control table create table dir_control ( bla bla bla) vsql_getpw:failed select MySQL SERVER HAS GONE MySQL ADDUSER FAILED. _ AVISO ! Le meilleur de l'Internet - http://www.aviso.ci/
CatchAll+Vacation+QuotaWarn
Hi All Just to give a quick update on subject modifications. First two worked (thanks Bill Shupp), the 3rd didn't (Sorry Agus Basyari that I couldn't get it to work). Details: I am running vpopmail 4.9.10 + qmailadmin 0.45 + sqwebmail 2.1.1 on a GNU/Linux box. Quota Warn: I followed Agus Basyari's instructions; ie exchange his vpopmail.c with the original. Placed modified versions of "quotawarn1" and quotawarn2" inside ~vpopmail/bin directory. Configured, make, make install-strip. CatchAll+Vacation: Applied the supplied patch to a clean qmailadmin-0.45 source. Configured, make clean, make, make install-strip. Observed: Whenever a mail was attempted to be delivered to a domain, mail log came up with "Aack, child crashed" type of messages; e.g. --- Jun 30 01:11:48 pop qmail: 993841908.653196 info msg 440984: bytes 737 from [EMAIL PROTECTED]> qp 23478 uid 502 Jun 30 01:11:48 pop qmail: 993841908.755477 starting delivery 42: msg 440984 to local [EMAIL PROTECTED] Jun 30 01:11:48 pop qmail: 993841908.755526 status: local 1/10 remote 0/20 Jun 30 01:11:48 pop qmail: 993841908.774558 delivery 42: deferral: Aack,_child_crashed._(#4.3.0)/ Jun 30 01:11:48 pop qmail: 993841908.774632 status: local 0/10 remote 0/20 - Although it appeared that the messages were getting delivered, there would inevitably be a "Aack, child crashed" message with any mail delivery, plus I got repeated messages while trying out a vacation autoresponder. Needless to say, panic and heart palpitations set in after about 3 minutes, and suspecting the delivery agent, I quickly left out the whole QuotaWarn part and recompiled vpopmail and qmailadmin without it. Everything seems OK after that, with normal mail logs. Phew, ...never again on a production server... Analysis; QuotaWarn code: I don't know why the qmail child program kept crashing. The only changes I did was modify the quotawarn messages by deleting the first two lines (system messages), and add a couple of lines of text to it. Agus, anything? Faruque
Re: vconvert
I use Webmin my self. Very useful. However, how would you put, for example, users and their passwords from inside a large "shadow-file-type" file into a domain handled by vpopmail+mysql? Vconvert would not only assimilate the users and encrypted passwords, but would also make their individual directories and Maildir for the domain of your choice. There is also a need to, vice-versa, backup this information from MySQL database tables into some sort of "shadow-file-type" file for recovery purposes, if needed. (BTW, I searched for "RTFM" at mysql.com. Didn't find anything on it.) Faruque At 01:26 PM 6/29/01 -0400, KEnet Webmaster wrote: >Theres two things I could reccommend for using mysql > >The first (and simplistic) is PHPmyAdmin which is a php based MySQL >administration tool. > >The second is WebMin. I like webmin personally. It gives you total >protected access to all your system stuff (system, crons, servers, etc) >including mysql, and in the mysql section you canpoint and click your way to >a back up. > >But theres always the better way of RTFM at mysql.com and learn how to do >it. > >Kil > >- Original Message - >From: "Syed Faruque Ahmed" <[EMAIL PROTECTED]> >To: "chris" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> >Sent: Friday, June 29, 2001 1:21 PM >Subject: Re: vconvert > > >I have been mulling over this for sometime. I still don't feel comfortable >putting the development versions into production; too many frequent changes >that might be necessary. So I am still with the stable version of vpopmail >with a working vconvert. >However, there is an interesting script in the source under "contrib" >directory called addusers.pl, that manually adds a list of users, one by >one, to a domain you specify. The catch is that it requires cleartext >passwords. Can "vadduser" work with encrypted passwords? >Another problem is how to backup a list of users with their passwords from >the MySQL db? I plan to use vconvert to create vpasswd files on a regular >basis, but how can one do that with the development vpopmail? Does anybody >have a (perl?) script that can read the db table and write out a neat >little vpasswd file? I think that it is do-able, but am too pressed with >other stuff. > >Faruque > >At 09:56 AM 6/29/01 -0700, chris wrote: > >With the current version of vconvert "disabled," does anyone have a > >suggestion on how to import my current domains into mysql? I'm not > >currently using the replication feature which is -as I understand it- the > >reason vconvert is disabled right now. It doesn't currently support the > >replication freature that the rest of vpopmail does. I tried using an >older > >version of vconvert, I believe it was 4.10.18. It loaded the domain info, > >but it seemed that the path to the domains dir was not imported correctly. > > > >Any ideas? > > > >Thanks, > >Chris Bunnell >
10 Million Fresh Email Addresses, Stealth Mass Mailer & More.. 10143
Email advertising WORKS! Email Advertise your product or website to millions for only $99. For $99.00 you will receive the Stealth Bulk Mailing Software, List Manager, Over 10 Million "FRESH" E-Mail Addresses, Targeted Email Address Harvesting Software, and as a FREE BONUS, special Mail Servers to send your mail through! Its only $99 for everything, and you can DOWNLOAD IT ALL, today! And as a special bonus, we will harvest a targeted list for you! FOR MORE INFO: ---> http://webhost4u.mysprintfast.com/mrx/ ALSO: Friendly Hosting and POP3s available. To be PERMANENTLY REMOVED from our mail list, YOU MUST SIMPLY REPLY with "REMOVE" in the --> "SUBJECT" Line! === This mail is sent by a member (ID 1129) of removenow.org --- the email watchdog. --- To be excluded from future mailings by this member and thousands of other companies , please exercise this your right at http://www.removenow.org
RE: vpopmail 4.10.24 vdeldomain not removing a domaind directory properly and leaving links in /var/vpopmail/domain on Solaris 7 x86
function vdelfiles in vpopmail.c unlinks files... This could be the reason your seeing "residue" Since solaris' unlink command bypasses any normal quota/disk control your going to see this residue. After a reboot a reallocation of the tables should spark it back to reality. (or a fsck) :P -Original Message- From: David Wartell [mailto:[EMAIL PROTECTED]] Sent: Friday, June 29, 2001 12:23 PM To: [EMAIL PROTECTED] Subject: vpopmail 4.10.24 vdeldomain not removing a domaind directory properly and leaving links in /var/vpopmail/domain on Solaris 7 x86 I have vpopmail installed 4.10.24 vdeldomain running on Solaris 7 x86. vdeldomain is not removing a domains directory properly from /var/vpopmail/domains. Here is a sequence of commands which repoduce the error. The commands were run on a fresh install of vpopmail. Notice the link count for the domains directory. apollo:/var/vpopmail # ll total 7 drwxr-xr-x 2 vpopmail vchkpw512 Jun 29 14:51 bin/ drwxr-xr-x 4 vpopmail vchkpw512 Jun 29 14:51 doc/ drwx-- 2 vpopmail vchkpw512 Jun 29 14:51 domains/ drwxr-xr-x 2 vpopmail vchkpw512 Jun 29 14:50 etc/ drwxr-xr-x 2 vpopmail vchkpw512 Jun 29 14:51 include/ drwxr-xr-x 2 vpopmail vchkpw512 Jun 29 14:51 lib/ drwx-- 2 vpopmail vchkpw512 Jun 29 14:51 users/ I add a domain and of course the link count goes up as expected apollo:/var/vpopmail # bin/vadddomain foo.com 2782y2 You have mail in /usr/var/mail/ apollo:/var/vpopmail # ll total 7 drwxr-xr-x 2 vpopmail vchkpw512 Jun 29 14:51 bin/ drwxr-xr-x 4 vpopmail vchkpw512 Jun 29 14:51 doc/ drwx-- 3 vpopmail vchkpw512 Jun 29 14:52 domains/ drwxr-xr-x 2 vpopmail vchkpw512 Jun 29 14:50 etc/ drwxr-xr-x 2 vpopmail vchkpw512 Jun 29 14:51 include/ drwxr-xr-x 2 vpopmail vchkpw512 Jun 29 14:51 lib/ drwx-- 2 vpopmail vchkpw512 Jun 29 14:51 users/ I add a second domain and the link count of domain goes up again as expected apollo:/var/vpopmail # bin/vadddomain foo2.com 2782y2 apollo:/var/vpopmail # ll total 7 drwxr-xr-x 2 vpopmail vchkpw512 Jun 29 14:51 bin/ drwxr-xr-x 4 vpopmail vchkpw512 Jun 29 14:51 doc/ drwx-- 4 vpopmail vchkpw512 Jun 29 14:52 domains/ drwxr-xr-x 2 vpopmail vchkpw512 Jun 29 14:50 etc/ drwxr-xr-x 2 vpopmail vchkpw512 Jun 29 14:51 include/ drwxr-xr-x 2 vpopmail vchkpw512 Jun 29 14:51 lib/ drwx-- 2 vpopmail vchkpw512 Jun 29 14:51 users/ Now I remove a domain and link count of domains does NOT go down! This means the disk space and inodes are still being used. What is vpopmail doing when it deletes fuiles and directories? apollo:/var/vpopmail # bin/vdeldomain foo2.com apollo:/var/vpopmail # ll total 7 drwxr-xr-x 2 vpopmail vchkpw512 Jun 29 14:51 bin/ drwxr-xr-x 4 vpopmail vchkpw512 Jun 29 14:51 doc/ drwx-- 4 vpopmail vchkpw512 Jun 29 14:52 domains/ drwxr-xr-x 2 vpopmail vchkpw512 Jun 29 14:50 etc/ drwxr-xr-x 2 vpopmail vchkpw512 Jun 29 14:51 include/ drwxr-xr-x 2 vpopmail vchkpw512 Jun 29 14:51 lib/ drwx-- 2 vpopmail vchkpw512 Jun 29 14:51 users/ apollo:/var/vpopmail # ll domains total 1 drwx-- 3 vpopmail vchkpw512 Jun 29 14:52 foo.com/ apollo:/var/vpopmail # I have tried to verify it is not my system. I created directories and then removed them in the domains directory with mkdir and rmdir and didn't see the same behavior. The Solaris system has both been running production systems for about 2 years now. I did notice that the configure for vpopmail could not find my fdatasync(). I have noticed this behavior with 4.10.22 and 4.10.23 as well. Any ideas? -David Wartell
vpopmail 4.10.24 vdeldomain not removing a domaind directory properly and leaving links in /var/vpopmail/domain on Solaris 7 x86
I have vpopmail installed 4.10.24 vdeldomain running on Solaris 7 x86. vdeldomain is not removing a domains directory properly from /var/vpopmail/domains. Here is a sequence of commands which repoduce the error. The commands were run on a fresh install of vpopmail. Notice the link count for the domains directory. apollo:/var/vpopmail # ll total 7 drwxr-xr-x 2 vpopmail vchkpw512 Jun 29 14:51 bin/ drwxr-xr-x 4 vpopmail vchkpw512 Jun 29 14:51 doc/ drwx-- 2 vpopmail vchkpw512 Jun 29 14:51 domains/ drwxr-xr-x 2 vpopmail vchkpw512 Jun 29 14:50 etc/ drwxr-xr-x 2 vpopmail vchkpw512 Jun 29 14:51 include/ drwxr-xr-x 2 vpopmail vchkpw512 Jun 29 14:51 lib/ drwx-- 2 vpopmail vchkpw512 Jun 29 14:51 users/ I add a domain and of course the link count goes up as expected apollo:/var/vpopmail # bin/vadddomain foo.com 2782y2 You have mail in /usr/var/mail/ apollo:/var/vpopmail # ll total 7 drwxr-xr-x 2 vpopmail vchkpw512 Jun 29 14:51 bin/ drwxr-xr-x 4 vpopmail vchkpw512 Jun 29 14:51 doc/ drwx-- 3 vpopmail vchkpw512 Jun 29 14:52 domains/ drwxr-xr-x 2 vpopmail vchkpw512 Jun 29 14:50 etc/ drwxr-xr-x 2 vpopmail vchkpw512 Jun 29 14:51 include/ drwxr-xr-x 2 vpopmail vchkpw512 Jun 29 14:51 lib/ drwx-- 2 vpopmail vchkpw512 Jun 29 14:51 users/ I add a second domain and the link count of domain goes up again as expected apollo:/var/vpopmail # bin/vadddomain foo2.com 2782y2 apollo:/var/vpopmail # ll total 7 drwxr-xr-x 2 vpopmail vchkpw512 Jun 29 14:51 bin/ drwxr-xr-x 4 vpopmail vchkpw512 Jun 29 14:51 doc/ drwx-- 4 vpopmail vchkpw512 Jun 29 14:52 domains/ drwxr-xr-x 2 vpopmail vchkpw512 Jun 29 14:50 etc/ drwxr-xr-x 2 vpopmail vchkpw512 Jun 29 14:51 include/ drwxr-xr-x 2 vpopmail vchkpw512 Jun 29 14:51 lib/ drwx-- 2 vpopmail vchkpw512 Jun 29 14:51 users/ Now I remove a domain and link count of domains does NOT go down! This means the disk space and inodes are still being used. What is vpopmail doing when it deletes fuiles and directories? apollo:/var/vpopmail # bin/vdeldomain foo2.com apollo:/var/vpopmail # ll total 7 drwxr-xr-x 2 vpopmail vchkpw512 Jun 29 14:51 bin/ drwxr-xr-x 4 vpopmail vchkpw512 Jun 29 14:51 doc/ drwx-- 4 vpopmail vchkpw512 Jun 29 14:52 domains/ drwxr-xr-x 2 vpopmail vchkpw512 Jun 29 14:50 etc/ drwxr-xr-x 2 vpopmail vchkpw512 Jun 29 14:51 include/ drwxr-xr-x 2 vpopmail vchkpw512 Jun 29 14:51 lib/ drwx-- 2 vpopmail vchkpw512 Jun 29 14:51 users/ apollo:/var/vpopmail # ll domains total 1 drwx-- 3 vpopmail vchkpw512 Jun 29 14:52 foo.com/ apollo:/var/vpopmail # I have tried to verify it is not my system. I created directories and then removed them in the domains directory with mkdir and rmdir and didn't see the same behavior. The Solaris system has both been running production systems for about 2 years now. I did notice that the configure for vpopmail could not find my fdatasync(). I have noticed this behavior with 4.10.22 and 4.10.23 as well. Any ideas? -David Wartell
Re: vconvert
Theres two things I could reccommend for using mysql The first (and simplistic) is PHPmyAdmin which is a php based MySQL administration tool. The second is WebMin. I like webmin personally. It gives you total protected access to all your system stuff (system, crons, servers, etc) including mysql, and in the mysql section you canpoint and click your way to a back up. But theres always the better way of RTFM at mysql.com and learn how to do it. Kil - Original Message - From: "Syed Faruque Ahmed" <[EMAIL PROTECTED]> To: "chris" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Friday, June 29, 2001 1:21 PM Subject: Re: vconvert I have been mulling over this for sometime. I still don't feel comfortable putting the development versions into production; too many frequent changes that might be necessary. So I am still with the stable version of vpopmail with a working vconvert. However, there is an interesting script in the source under "contrib" directory called addusers.pl, that manually adds a list of users, one by one, to a domain you specify. The catch is that it requires cleartext passwords. Can "vadduser" work with encrypted passwords? Another problem is how to backup a list of users with their passwords from the MySQL db? I plan to use vconvert to create vpasswd files on a regular basis, but how can one do that with the development vpopmail? Does anybody have a (perl?) script that can read the db table and write out a neat little vpasswd file? I think that it is do-able, but am too pressed with other stuff. Faruque At 09:56 AM 6/29/01 -0700, chris wrote: >With the current version of vconvert "disabled," does anyone have a >suggestion on how to import my current domains into mysql? I'm not >currently using the replication feature which is -as I understand it- the >reason vconvert is disabled right now. It doesn't currently support the >replication freature that the rest of vpopmail does. I tried using an older >version of vconvert, I believe it was 4.10.18. It loaded the domain info, >but it seemed that the path to the domains dir was not imported correctly. > >Any ideas? > >Thanks, >Chris Bunnell
Re: vconvert
I have been mulling over this for sometime. I still don't feel comfortable putting the development versions into production; too many frequent changes that might be necessary. So I am still with the stable version of vpopmail with a working vconvert. However, there is an interesting script in the source under "contrib" directory called addusers.pl, that manually adds a list of users, one by one, to a domain you specify. The catch is that it requires cleartext passwords. Can "vadduser" work with encrypted passwords? Another problem is how to backup a list of users with their passwords from the MySQL db? I plan to use vconvert to create vpasswd files on a regular basis, but how can one do that with the development vpopmail? Does anybody have a (perl?) script that can read the db table and write out a neat little vpasswd file? I think that it is do-able, but am too pressed with other stuff. Faruque At 09:56 AM 6/29/01 -0700, chris wrote: >With the current version of vconvert "disabled," does anyone have a >suggestion on how to import my current domains into mysql? I'm not >currently using the replication feature which is -as I understand it- the >reason vconvert is disabled right now. It doesn't currently support the >replication freature that the rest of vpopmail does. I tried using an older >version of vconvert, I believe it was 4.10.18. It loaded the domain info, >but it seemed that the path to the domains dir was not imported correctly. > >Any ideas? > >Thanks, >Chris Bunnell
vconvert
With the current version of vconvert "disabled," does anyone have a suggestion on how to import my current domains into mysql? I'm not currently using the replication feature which is -as I understand it- the reason vconvert is disabled right now. It doesn't currently support the replication freature that the rest of vpopmail does. I tried using an older version of vconvert, I believe it was 4.10.18. It loaded the domain info, but it seemed that the path to the domains dir was not imported correctly. Any ideas? Thanks, Chris Bunnell
RE: vpopmail & Alias's
Hola (Greetings), Mick! A(t) 14:29 29/06/01, vau escriure (you wrote): >Small correction > >Am not sure i understand the syntax >Lets say i have a vpopmail address as >follows > [EMAIL PROTECTED] > I want to set and alias for that address as follows > mickToo > The command to use would be as follows.. > > # alias of [EMAIL PROTECTED] (enter) > # /var/vpopmail/domains/domain.com/.qmail-mickToo (enter) Not quite. Do: $ su vpopmail (enter) $ echo "/var/vpopmail/domains/domain.com/mick/Maildir/" > /var/vpopmail/domains/domain.com/.qmail-mickToo (enter) $ exit (enter) -- All the best (Adéu-siau), Lou Hevly [EMAIL PROTECTED] http://www.visca.com
RE: vpopmail & Alias's
Small correction Am not sure i understand the syntax Lets say i have a vpopmail address as follows [EMAIL PROTECTED] I want to set and alias for that address as follows mickToo The command to use would be as follows.. # alias of [EMAIL PROTECTED] (enter) # /var/vpopmail/domains/domain.com/.qmail-mickToo (enter) Thanks Mick ~~~` To: Mick Cc: Vpopmail-List Subject: Re: vpopmail & Alias's Mick wrote: > > How are alias's created for Vpopmail users? > > Thanks > > Mick It can use standard .qmail files. Place them in the directory of the virtual domain. alias of [EMAIL PROTECTED] /home/vpopmail/domains/test.com/.qmail-joe Ken Jones