Re: [weewx-user] Re: Multiple full sensor data with one SDR-Stick

[f4n...@gmail.com]

Thanks I will definitely try it out. 

In the meantime I discovered, in an other weewx instance where the WH65 is 
the secondary/extra sensor, which sends 3 to 4 packets per minute, that the 
plots daily to monthly only contain the current wind gust after each 60 
seconds, while the statistics sucessfully keep the max gust of the full 
minute. (as shown in my other thread)

I'm using soilMoist for that sensor and aggregate type = max is already set 
for weekly and mothly in skin.conf. Is there anything else I could try to 
fix this?

an oldman schrieb am Donnerstag, 3. März 2022 um 20:25:55 UTC+1:

> it's matthewwall weewx-sdr driver
> i just copied and pasted the parts i needed
>
> On Thursday, March 3, 2022 at 12:36:39 PM UTC-6 peterq...@gmail.com wrote:
>
>> Have you considered using Python's JSON function to put the whole thing 
>> into a dictionary so there's no need for all the if statements?
>>
>> On Thu, Mar 3, 2022, 10:26 AM an oldman  wrote:
>>
>>> this is the output for rtl_433 -M utc -M protocol -M level -F json 
>>> command for acurite atlas sensor
>>>
>>> {"time" : "2022-03-03 18:16:57", "protocol" : 40, "model" : 
>>> "Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 0, 
>>> "battery_ok" : 1, "message_type" : 39, "wind_avg_mi_h" : 3.000, "uv" : 2, 
>>> "lux" : 45830, "strike_count" : 3, "strike_distance" : 10, "exception" : 0, 
>>> "raw_msg" : "81eee78142a3e7006a0d", "mod" : "ASK", "freq" : 433.946, "rssi" 
>>> : -4.499, "snr" : 28.102, "noise" : -32.602}
>>> {"time" : "2022-03-03 18:16:57", "protocol" : 40, "model" : 
>>> "Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 1, 
>>> "battery_ok" : 1, "message_type" : 39, "wind_avg_mi_h" : 3.000, "uv" : 2, 
>>> "lux" : 45830, "strike_count" : 3, "strike_distance" : 10, "exception" : 0, 
>>> "raw_msg" : "85eee78142a3e7006a11", "mod" : "ASK", "freq" : 433.946, "rssi" 
>>> : -4.499, "snr" : 28.102, "noise" : -32.602}
>>> {"time" : "2022-03-03 18:16:57", "protocol" : 40, "model" : 
>>> "Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 2, 
>>> "battery_ok" : 1, "message_type" : 39, "wind_avg_mi_h" : 3.000, "uv" : 2, 
>>> "lux" : 45830, "strike_count" : 3, "strike_distance" : 10, "exception" : 0, 
>>> "raw_msg" : "89eee78142a3e7006a15", "mod" : "ASK", "freq" : 433.946, "rssi" 
>>> : -4.499, "snr" : 28.102, "noise" : -32.602}
>>> {"time" : "2022-03-03 18:17:07", "protocol" : 40, "model" : 
>>> "Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 0, 
>>> "battery_ok" : 1, "message_type" : 37, "wind_avg_mi_h" : 5.000, 
>>> "temperature_F" : 14.600, "humidity" : 69, "strike_count" : 3, 
>>> "strike_distance" : 10, "exception" : 0, "raw_msg" : 
>>> "81ee65824422c5006aeb", "mod" : "ASK", "freq" : 433.947, "rssi" : -5.061, 
>>> "snr" : 27.083, "noise" : -32.144}
>>> {"time" : "2022-03-03 18:17:07", "protocol" : 40, "model" : 
>>> "Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 1, 
>>> "battery_ok" : 1, "message_type" : 37, "wind_avg_mi_h" : 5.000, 
>>> "temperature_F" : 14.600, "humidity" : 69, "strike_count" : 3, 
>>> "strike_distance" : 10, "exception" : 0, "raw_msg" : 
>>> "85ee65824422c5006aef", "mod" : "ASK", "freq" : 433.947, "rssi" : -5.061, 
>>> "snr" : 27.083, "noise" : -32.144}
>>> {"time" : "2022-03-03 18:17:07", "protocol" : 40, "model" : 
>>> "Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 2, 
>>> "battery_ok" : 1, "message_type" : 37, "wind_avg_mi_h" : 5.000, 
>>> "temperature_F" : 14.600, "humidity" : 69, "strike_count" : 3, 
>>> "strike_distance" : 10, "exception" : 0, "raw_msg" : 
>>> "89ee65824422c5006af3", "mod" : "ASK", "freq" : 433.947, "rssi" : -5.061, 
>>> "snr" : 27.083, "noise" : -32.144}
>>> {"time" : "2022-03-03 18:17:18", "protocol" : 40, "model" : 
>>> "Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 0, 
>>> "battery_ok" : 1, "message_type" : 38, "wind_avg_mi_h" : 5.000, 
>>> "wind_dir_deg" : 94.000, "rain_in" : 1.140, "strike_count" : 3, 
>>> "strike_distance" : 10, "exception" : 0, "raw_msg" : 
>>> "81ee6682427872006aed", "mod" : "ASK", "freq" : 433.948, "rssi" : -3.818, 
>>> "snr" : 28.326, "noise" : -32.144}
>>> {"time" : "2022-03-03 18:17:18", "protocol" : 40, "model" : 
>>> "Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 1, 
>>> "battery_ok" : 1, "message_type" : 38, "wind_avg_mi_h" : 5.000, 
>>> "wind_dir_deg" : 94.000, "rain_in" : 1.140, "strike_count" : 3, 
>>> "strike_distance" : 10, "exception" : 0, "raw_msg" : 
>>> "85ee6682427872006af1", "mod" : "ASK", "freq" : 433.948, "rssi" : -3.818, 
>>> "snr" : 28.326, "noise" : -32.144}
>>>
>>> you could add them to sdr.py i added them for some acurite sensors that 
>>> did not have them it looks something like
>>> # connection diagnostics (-M level)
>>> if 'mod' in obj:
>>> pkt['mod'] = obj.get('mod')
>>> if 'freq' in obj:
>>> pkt['freq'] = Packet.get_float(obj, 'freq')
>>> if 'rssi' in obj:
>>> pkt['rssi'] = Packet.get_float(obj, 'rssi')
>>> if 'snr' in obj:

Re: [weewx-user] Re: Multiple full sensor data with one SDR-Stick

[an oldman]

it's matthewwall weewx-sdr driver
i just copied and pasted the parts i needed

On Thursday, March 3, 2022 at 12:36:39 PM UTC-6 peterq...@gmail.com wrote:

> Have you considered using Python's JSON function to put the whole thing 
> into a dictionary so there's no need for all the if statements?
>
> On Thu, Mar 3, 2022, 10:26 AM an oldman  wrote:
>
>> this is the output for rtl_433 -M utc -M protocol -M level -F json 
>> command for acurite atlas sensor
>>
>> {"time" : "2022-03-03 18:16:57", "protocol" : 40, "model" : 
>> "Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 0, 
>> "battery_ok" : 1, "message_type" : 39, "wind_avg_mi_h" : 3.000, "uv" : 2, 
>> "lux" : 45830, "strike_count" : 3, "strike_distance" : 10, "exception" : 0, 
>> "raw_msg" : "81eee78142a3e7006a0d", "mod" : "ASK", "freq" : 433.946, "rssi" 
>> : -4.499, "snr" : 28.102, "noise" : -32.602}
>> {"time" : "2022-03-03 18:16:57", "protocol" : 40, "model" : 
>> "Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 1, 
>> "battery_ok" : 1, "message_type" : 39, "wind_avg_mi_h" : 3.000, "uv" : 2, 
>> "lux" : 45830, "strike_count" : 3, "strike_distance" : 10, "exception" : 0, 
>> "raw_msg" : "85eee78142a3e7006a11", "mod" : "ASK", "freq" : 433.946, "rssi" 
>> : -4.499, "snr" : 28.102, "noise" : -32.602}
>> {"time" : "2022-03-03 18:16:57", "protocol" : 40, "model" : 
>> "Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 2, 
>> "battery_ok" : 1, "message_type" : 39, "wind_avg_mi_h" : 3.000, "uv" : 2, 
>> "lux" : 45830, "strike_count" : 3, "strike_distance" : 10, "exception" : 0, 
>> "raw_msg" : "89eee78142a3e7006a15", "mod" : "ASK", "freq" : 433.946, "rssi" 
>> : -4.499, "snr" : 28.102, "noise" : -32.602}
>> {"time" : "2022-03-03 18:17:07", "protocol" : 40, "model" : 
>> "Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 0, 
>> "battery_ok" : 1, "message_type" : 37, "wind_avg_mi_h" : 5.000, 
>> "temperature_F" : 14.600, "humidity" : 69, "strike_count" : 3, 
>> "strike_distance" : 10, "exception" : 0, "raw_msg" : 
>> "81ee65824422c5006aeb", "mod" : "ASK", "freq" : 433.947, "rssi" : -5.061, 
>> "snr" : 27.083, "noise" : -32.144}
>> {"time" : "2022-03-03 18:17:07", "protocol" : 40, "model" : 
>> "Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 1, 
>> "battery_ok" : 1, "message_type" : 37, "wind_avg_mi_h" : 5.000, 
>> "temperature_F" : 14.600, "humidity" : 69, "strike_count" : 3, 
>> "strike_distance" : 10, "exception" : 0, "raw_msg" : 
>> "85ee65824422c5006aef", "mod" : "ASK", "freq" : 433.947, "rssi" : -5.061, 
>> "snr" : 27.083, "noise" : -32.144}
>> {"time" : "2022-03-03 18:17:07", "protocol" : 40, "model" : 
>> "Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 2, 
>> "battery_ok" : 1, "message_type" : 37, "wind_avg_mi_h" : 5.000, 
>> "temperature_F" : 14.600, "humidity" : 69, "strike_count" : 3, 
>> "strike_distance" : 10, "exception" : 0, "raw_msg" : 
>> "89ee65824422c5006af3", "mod" : "ASK", "freq" : 433.947, "rssi" : -5.061, 
>> "snr" : 27.083, "noise" : -32.144}
>> {"time" : "2022-03-03 18:17:18", "protocol" : 40, "model" : 
>> "Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 0, 
>> "battery_ok" : 1, "message_type" : 38, "wind_avg_mi_h" : 5.000, 
>> "wind_dir_deg" : 94.000, "rain_in" : 1.140, "strike_count" : 3, 
>> "strike_distance" : 10, "exception" : 0, "raw_msg" : 
>> "81ee6682427872006aed", "mod" : "ASK", "freq" : 433.948, "rssi" : -3.818, 
>> "snr" : 28.326, "noise" : -32.144}
>> {"time" : "2022-03-03 18:17:18", "protocol" : 40, "model" : 
>> "Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 1, 
>> "battery_ok" : 1, "message_type" : 38, "wind_avg_mi_h" : 5.000, 
>> "wind_dir_deg" : 94.000, "rain_in" : 1.140, "strike_count" : 3, 
>> "strike_distance" : 10, "exception" : 0, "raw_msg" : 
>> "85ee6682427872006af1", "mod" : "ASK", "freq" : 433.948, "rssi" : -3.818, 
>> "snr" : 28.326, "noise" : -32.144}
>>
>> you could add them to sdr.py i added them for some acurite sensors that 
>> did not have them it looks something like
>> # connection diagnostics (-M level)
>> if 'mod' in obj:
>> pkt['mod'] = obj.get('mod')
>> if 'freq' in obj:
>> pkt['freq'] = Packet.get_float(obj, 'freq')
>> if 'rssi' in obj:
>> pkt['rssi'] = Packet.get_float(obj, 'rssi')
>> if 'snr' in obj:
>> pkt['snr'] = obj.get('snr')
>> if 'noise' in obj:
>> pkt['noise'] = obj.get('noise')
>>
>> yes must be in the sensor map
>>
>> here is what is in my for my acurite atlas [sensor_map] for rssi, freq, 
>> snr, noise, protocol
>> rssi = rssi.494.AcuriteAtlasPacket
>> freq = freq.494.AcuriteAtlasPacket
>> snr = snr.494.AcuriteAtlasPacket
>> noise = noise.494.AcuriteAtlasPacket
>> protocol = protocol.494.AcuriteAtlasPacket
>>
>> On Thursday, March 3, 2022 at 8:12:42 AM UTC-6 f4n...@gmail.com wrote:
>>
>>> They don't seem to be in sdr.py for my stations. Would it work to add it 
>>> manually to sdr.py for the wh65b and whx080?
>>> And do I have to add these to the sensor 

Re: [weewx-user] Re: Multiple full sensor data with one SDR-Stick

[p q]

Have you considered using Python's JSON function to put the whole thing
into a dictionary so there's no need for all the if statements?

On Thu, Mar 3, 2022, 10:26 AM an oldman  wrote:

> this is the output for rtl_433 -M utc -M protocol -M level -F json command
> for acurite atlas sensor
>
> {"time" : "2022-03-03 18:16:57", "protocol" : 40, "model" :
> "Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 0,
> "battery_ok" : 1, "message_type" : 39, "wind_avg_mi_h" : 3.000, "uv" : 2,
> "lux" : 45830, "strike_count" : 3, "strike_distance" : 10, "exception" : 0,
> "raw_msg" : "81eee78142a3e7006a0d", "mod" : "ASK", "freq" : 433.946, "rssi"
> : -4.499, "snr" : 28.102, "noise" : -32.602}
> {"time" : "2022-03-03 18:16:57", "protocol" : 40, "model" :
> "Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 1,
> "battery_ok" : 1, "message_type" : 39, "wind_avg_mi_h" : 3.000, "uv" : 2,
> "lux" : 45830, "strike_count" : 3, "strike_distance" : 10, "exception" : 0,
> "raw_msg" : "85eee78142a3e7006a11", "mod" : "ASK", "freq" : 433.946, "rssi"
> : -4.499, "snr" : 28.102, "noise" : -32.602}
> {"time" : "2022-03-03 18:16:57", "protocol" : 40, "model" :
> "Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 2,
> "battery_ok" : 1, "message_type" : 39, "wind_avg_mi_h" : 3.000, "uv" : 2,
> "lux" : 45830, "strike_count" : 3, "strike_distance" : 10, "exception" : 0,
> "raw_msg" : "89eee78142a3e7006a15", "mod" : "ASK", "freq" : 433.946, "rssi"
> : -4.499, "snr" : 28.102, "noise" : -32.602}
> {"time" : "2022-03-03 18:17:07", "protocol" : 40, "model" :
> "Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 0,
> "battery_ok" : 1, "message_type" : 37, "wind_avg_mi_h" : 5.000,
> "temperature_F" : 14.600, "humidity" : 69, "strike_count" : 3,
> "strike_distance" : 10, "exception" : 0, "raw_msg" :
> "81ee65824422c5006aeb", "mod" : "ASK", "freq" : 433.947, "rssi" : -5.061,
> "snr" : 27.083, "noise" : -32.144}
> {"time" : "2022-03-03 18:17:07", "protocol" : 40, "model" :
> "Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 1,
> "battery_ok" : 1, "message_type" : 37, "wind_avg_mi_h" : 5.000,
> "temperature_F" : 14.600, "humidity" : 69, "strike_count" : 3,
> "strike_distance" : 10, "exception" : 0, "raw_msg" :
> "85ee65824422c5006aef", "mod" : "ASK", "freq" : 433.947, "rssi" : -5.061,
> "snr" : 27.083, "noise" : -32.144}
> {"time" : "2022-03-03 18:17:07", "protocol" : 40, "model" :
> "Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 2,
> "battery_ok" : 1, "message_type" : 37, "wind_avg_mi_h" : 5.000,
> "temperature_F" : 14.600, "humidity" : 69, "strike_count" : 3,
> "strike_distance" : 10, "exception" : 0, "raw_msg" :
> "89ee65824422c5006af3", "mod" : "ASK", "freq" : 433.947, "rssi" : -5.061,
> "snr" : 27.083, "noise" : -32.144}
> {"time" : "2022-03-03 18:17:18", "protocol" : 40, "model" :
> "Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 0,
> "battery_ok" : 1, "message_type" : 38, "wind_avg_mi_h" : 5.000,
> "wind_dir_deg" : 94.000, "rain_in" : 1.140, "strike_count" : 3,
> "strike_distance" : 10, "exception" : 0, "raw_msg" :
> "81ee6682427872006aed", "mod" : "ASK", "freq" : 433.948, "rssi" : -3.818,
> "snr" : 28.326, "noise" : -32.144}
> {"time" : "2022-03-03 18:17:18", "protocol" : 40, "model" :
> "Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 1,
> "battery_ok" : 1, "message_type" : 38, "wind_avg_mi_h" : 5.000,
> "wind_dir_deg" : 94.000, "rain_in" : 1.140, "strike_count" : 3,
> "strike_distance" : 10, "exception" : 0, "raw_msg" :
> "85ee6682427872006af1", "mod" : "ASK", "freq" : 433.948, "rssi" : -3.818,
> "snr" : 28.326, "noise" : -32.144}
>
> you could add them to sdr.py i added them for some acurite sensors that
> did not have them it looks something like
> # connection diagnostics (-M level)
> if 'mod' in obj:
> pkt['mod'] = obj.get('mod')
> if 'freq' in obj:
> pkt['freq'] = Packet.get_float(obj, 'freq')
> if 'rssi' in obj:
> pkt['rssi'] = Packet.get_float(obj, 'rssi')
> if 'snr' in obj:
> pkt['snr'] = obj.get('snr')
> if 'noise' in obj:
> pkt['noise'] = obj.get('noise')
>
> yes must be in the sensor map
>
> here is what is in my for my acurite atlas [sensor_map] for rssi, freq,
> snr, noise, protocol
> rssi = rssi.494.AcuriteAtlasPacket
> freq = freq.494.AcuriteAtlasPacket
> snr = snr.494.AcuriteAtlasPacket
> noise = noise.494.AcuriteAtlasPacket
> protocol = protocol.494.AcuriteAtlasPacket
>
> On Thursday, March 3, 2022 at 8:12:42 AM UTC-6 f4n...@gmail.com wrote:
>
>> They don't seem to be in sdr.py for my stations. Would it work to add it
>> manually to sdr.py for the wh65b and whx080?
>> And do I have to add these to the sensor map?
>>
>> an oldman schrieb am Donnerstag, 3. März 2022 um 13:43:42 UTC+1:
>>
>>> I do know about the skin.conf and Seasons files, but the extensions.py
>>> and weewx.conf should be ok.
>>> I backup all of weewx before any upgrade, then check the files i modified
>>>
>>> for snr/noise/rssi rtl_433

[weewx-user] Re: Multiple full sensor data with one SDR-Stick

[an oldman]

this is the output for rtl_433 -M utc -M protocol -M level -F json command 
for acurite atlas sensor

{"time" : "2022-03-03 18:16:57", "protocol" : 40, "model" : 
"Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 0, 
"battery_ok" : 1, "message_type" : 39, "wind_avg_mi_h" : 3.000, "uv" : 2, 
"lux" : 45830, "strike_count" : 3, "strike_distance" : 10, "exception" : 0, 
"raw_msg" : "81eee78142a3e7006a0d", "mod" : "ASK", "freq" : 433.946, "rssi" 
: -4.499, "snr" : 28.102, "noise" : -32.602}
{"time" : "2022-03-03 18:16:57", "protocol" : 40, "model" : 
"Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 1, 
"battery_ok" : 1, "message_type" : 39, "wind_avg_mi_h" : 3.000, "uv" : 2, 
"lux" : 45830, "strike_count" : 3, "strike_distance" : 10, "exception" : 0, 
"raw_msg" : "85eee78142a3e7006a11", "mod" : "ASK", "freq" : 433.946, "rssi" 
: -4.499, "snr" : 28.102, "noise" : -32.602}
{"time" : "2022-03-03 18:16:57", "protocol" : 40, "model" : 
"Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 2, 
"battery_ok" : 1, "message_type" : 39, "wind_avg_mi_h" : 3.000, "uv" : 2, 
"lux" : 45830, "strike_count" : 3, "strike_distance" : 10, "exception" : 0, 
"raw_msg" : "89eee78142a3e7006a15", "mod" : "ASK", "freq" : 433.946, "rssi" 
: -4.499, "snr" : 28.102, "noise" : -32.602}
{"time" : "2022-03-03 18:17:07", "protocol" : 40, "model" : 
"Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 0, 
"battery_ok" : 1, "message_type" : 37, "wind_avg_mi_h" : 5.000, 
"temperature_F" : 14.600, "humidity" : 69, "strike_count" : 3, 
"strike_distance" : 10, "exception" : 0, "raw_msg" : 
"81ee65824422c5006aeb", "mod" : "ASK", "freq" : 433.947, "rssi" : -5.061, 
"snr" : 27.083, "noise" : -32.144}
{"time" : "2022-03-03 18:17:07", "protocol" : 40, "model" : 
"Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 1, 
"battery_ok" : 1, "message_type" : 37, "wind_avg_mi_h" : 5.000, 
"temperature_F" : 14.600, "humidity" : 69, "strike_count" : 3, 
"strike_distance" : 10, "exception" : 0, "raw_msg" : 
"85ee65824422c5006aef", "mod" : "ASK", "freq" : 433.947, "rssi" : -5.061, 
"snr" : 27.083, "noise" : -32.144}
{"time" : "2022-03-03 18:17:07", "protocol" : 40, "model" : 
"Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 2, 
"battery_ok" : 1, "message_type" : 37, "wind_avg_mi_h" : 5.000, 
"temperature_F" : 14.600, "humidity" : 69, "strike_count" : 3, 
"strike_distance" : 10, "exception" : 0, "raw_msg" : 
"89ee65824422c5006af3", "mod" : "ASK", "freq" : 433.947, "rssi" : -5.061, 
"snr" : 27.083, "noise" : -32.144}
{"time" : "2022-03-03 18:17:18", "protocol" : 40, "model" : 
"Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 0, 
"battery_ok" : 1, "message_type" : 38, "wind_avg_mi_h" : 5.000, 
"wind_dir_deg" : 94.000, "rain_in" : 1.140, "strike_count" : 3, 
"strike_distance" : 10, "exception" : 0, "raw_msg" : 
"81ee6682427872006aed", "mod" : "ASK", "freq" : 433.948, "rssi" : -3.818, 
"snr" : 28.326, "noise" : -32.144}
{"time" : "2022-03-03 18:17:18", "protocol" : 40, "model" : 
"Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 1, 
"battery_ok" : 1, "message_type" : 38, "wind_avg_mi_h" : 5.000, 
"wind_dir_deg" : 94.000, "rain_in" : 1.140, "strike_count" : 3, 
"strike_distance" : 10, "exception" : 0, "raw_msg" : 
"85ee6682427872006af1", "mod" : "ASK", "freq" : 433.948, "rssi" : -3.818, 
"snr" : 28.326, "noise" : -32.144}

you could add them to sdr.py i added them for some acurite sensors that did 
not have them it looks something like
# connection diagnostics (-M level)
if 'mod' in obj:
pkt['mod'] = obj.get('mod')
if 'freq' in obj:
pkt['freq'] = Packet.get_float(obj, 'freq')
if 'rssi' in obj:
pkt['rssi'] = Packet.get_float(obj, 'rssi')
if 'snr' in obj:
pkt['snr'] = obj.get('snr')
if 'noise' in obj:
pkt['noise'] = obj.get('noise')

yes must be in the sensor map

here is what is in my for my acurite atlas [sensor_map] for rssi, freq, 
snr, noise, protocol
rssi = rssi.494.AcuriteAtlasPacket
freq = freq.494.AcuriteAtlasPacket
snr = snr.494.AcuriteAtlasPacket
noise = noise.494.AcuriteAtlasPacket
protocol = protocol.494.AcuriteAtlasPacket

On Thursday, March 3, 2022 at 8:12:42 AM UTC-6 f4n...@gmail.com wrote:

> They don't seem to be in sdr.py for my stations. Would it work to add it 
> manually to sdr.py for the wh65b and whx080?
> And do I have to add these to the sensor map?
>
> an oldman schrieb am Donnerstag, 3. März 2022 um 13:43:42 UTC+1:
>
>> I do know about the skin.conf and Seasons files, but the extensions.py 
>> and weewx.conf should be ok.
>> I backup all of weewx before any upgrade, then check the files i modified
>>
>> for snr/noise/rssi rtl_433 use the -M level switch here is the command i 
>> use
>> /usr/local/bin/rtl_433 -M utc -M protocol -M level -F json
>>
>> Use "protocol" / "noprotocol" to output the decoder protocol number meta 
>> data.
>> Use "level" to add Modulation, Frequency, RSSI, SNR, and Noise meta data.
>> but i don't know if s

[weewx-user] Re: Multiple full sensor data with one SDR-Stick

[f4n...@gmail.com]

They don't seem to be in sdr.py for my stations. Would it work to add it 
manually to sdr.py for the wh65b and whx080?
And do I have to add these to the sensor map?

an oldman schrieb am Donnerstag, 3. März 2022 um 13:43:42 UTC+1:

> I do know about the skin.conf and Seasons files, but the extensions.py and 
> weewx.conf should be ok.
> I backup all of weewx before any upgrade, then check the files i modified
>
> for snr/noise/rssi rtl_433 use the -M level switch here is the command i 
> use
> /usr/local/bin/rtl_433 -M utc -M protocol -M level -F json
>
> Use "protocol" / "noprotocol" to output the decoder protocol number meta 
> data.
> Use "level" to add Modulation, Frequency, RSSI, SNR, and Noise meta data.
> but i don't know if sdr.py puts them in the loop data for all sensors.
> snr/noise/rssi/frequency are not saved to the database so only the current 
> tag works for them and to get them formated added to extensions.py
> weewx.units.obs_group_dict['noise'] = 'group_db'
> weewx.units.obs_group_dict['rssi'] = 'group_db'
> weewx.units.obs_group_dict['snr'] = 'group_db'
>
> to get the signal in weewx.conf i have this
>
> [StdCalibrate]
> [[Corrections]]
> rxCheckPercent = rssi + 100
> signal1 = rssi1 + 100
>
> On Thursday, March 3, 2022 at 4:21:32 AM UTC-6 f4n...@gmail.com wrote:
>
>> Thanks it worked! 
>>
>> But the  tables somehow broke the 2-row listing of the graphs so i 
>> left it out for now. As i already got all the graphs i need. 
>>
>> Will I have to do modify these files (including skin.conf, extensions.py) 
>> again after the update to weewx 4.7?
>>
>> Your SDR setup looks very nicely tweaked. How did you get the 
>> snr/noise/rssi and signal quality info and how to put them into weewx? 
>>
>> an oldman schrieb am Dienstag, 1. März 2022 um 23:34:06 UTC+1:
>>
>>> i do not have public access to my weather page so if you want to see 
>>> some of it these are about a 3rd of it starting at the top
>>>
>>> On Tuesday, March 1, 2022 at 11:57:42 AM UTC-6 an oldman wrote:
>>>
 in Seasons/skin.conf
 plot_groups list the plots to show

 moistsoil shows the plots for soilMoist1-4
 tempsoil for soilTemp1-4

 if you remove moistsoil, tempsoil from the list will stop showing the 
 plots

 you would have to add to plot_groups the extra wind stuff say 
 extrawind, extrawinddir, then under [ImageGenerator] section you would 
 have 
 to something like

 [[[dayextrawind]]]
 soilMoist1
 soilMoist2

 to do it for week, month, and year for week, month and year add 
 aggregate_type = max for week plot something like

 [[[weekextrawind]]]
 soilMoist1
 soilMoist2
 aggregate_type = max

 for direction an agian for week, month and year
 [[[dayextrawinddir]]]
 yscale = 0.0, 360.0, 45.0
 line_type = None
 marker_type = box
 marker_size = 2
 soilTemp4

 in Seasons/current.inc file after the last #end for and before  
 add something like

 
   Wind Speed
   $current.soilMoist1 
 $current.soilTemp1.ordinal_compass ($current.soilTemp1)
 

 no restart is needed for that just the next report cycle

 On Tuesday, March 1, 2022 at 10:25:22 AM UTC-6 f4n...@gmail.com wrote:

> As the database is quite new i just deleted the few soilMost3 entries 
> out and made a 
>
> sudo wee_database --rebuild-daily --from=2022-03-01 --to=2022-03-01 
> --config=/etc/weewx/weewx-sdr.conf
>
> and started weewx-sdr again, now it's looking quite good. I'm still 
> trying to figure out how to change the wind direction lines to dots?
>
>
> f4n...@gmail.com schrieb am Dienstag, 1. März 2022 um 13:37:09 UTC+1:
>
>> That's good to know, so I have to repeat these steps after a weewx 
>> update?
>>
>> I have it now running with the additional sensors: 
>> http://meteo.fankyy.ch/WsDi1c_sdr/
>> Not sure if the rain graph will only appear after it begins with rain 
>> count? 
>>
>> I used soilMoist 1-3 for Wind, Gust and Direction, but it put all in 
>> one graph, with the highest number 360 for wind direction, the speed is 
>> barely visible. So i use soiltemp4 for the wind direction now and hope, 
>> the 
>> back-to-normal named soilMoist3 will go out of the daily graph after 
>> 24h? 
>> Is there an easy way to delete it out of the database, without having to 
>> examine/stopping the database for a long time?
>>
>> I couldn't find where tho do this step:
>> then to display wind speed you would use $current.soilMoist1 in a 
>> template
>> and for wind dir $current.soilMoist2 and/or 
>> $current.soilMoist2.ordinal_compass
>> in the seasons skin
>> an oldman schrieb am Sonntag, 27. Februar 2022 um 09:11:24 UTC+1:
>>
>>> ther

[weewx-user] Re: Multiple full sensor data with one SDR-Stick

[an oldman]

I do know about the skin.conf and Seasons files, but the extensions.py and 
weewx.conf should be ok.
I backup all of weewx before any upgrade, then check the files i modified

for snr/noise/rssi rtl_433 use the -M level switch here is the command i use
/usr/local/bin/rtl_433 -M utc -M protocol -M level -F json

Use "protocol" / "noprotocol" to output the decoder protocol number meta 
data.
Use "level" to add Modulation, Frequency, RSSI, SNR, and Noise meta data.
but i don't know if sdr.py puts them in the loop data for all sensors.
snr/noise/rssi/frequency are not saved to the database so only the current 
tag works for them and to get them formated added to extensions.py
weewx.units.obs_group_dict['noise'] = 'group_db'
weewx.units.obs_group_dict['rssi'] = 'group_db'
weewx.units.obs_group_dict['snr'] = 'group_db'

to get the signal in weewx.conf i have this

[StdCalibrate]
[[Corrections]]
rxCheckPercent = rssi + 100
signal1 = rssi1 + 100

On Thursday, March 3, 2022 at 4:21:32 AM UTC-6 f4n...@gmail.com wrote:

> Thanks it worked! 
>
> But the  tables somehow broke the 2-row listing of the graphs so i 
> left it out for now. As i already got all the graphs i need. 
>
> Will I have to do modify these files (including skin.conf, extensions.py) 
> again after the update to weewx 4.7?
>
> Your SDR setup looks very nicely tweaked. How did you get the 
> snr/noise/rssi and signal quality info and how to put them into weewx? 
>
> an oldman schrieb am Dienstag, 1. März 2022 um 23:34:06 UTC+1:
>
>> i do not have public access to my weather page so if you want to see some 
>> of it these are about a 3rd of it starting at the top
>>
>> On Tuesday, March 1, 2022 at 11:57:42 AM UTC-6 an oldman wrote:
>>
>>> in Seasons/skin.conf
>>> plot_groups list the plots to show
>>>
>>> moistsoil shows the plots for soilMoist1-4
>>> tempsoil for soilTemp1-4
>>>
>>> if you remove moistsoil, tempsoil from the list will stop showing the 
>>> plots
>>>
>>> you would have to add to plot_groups the extra wind stuff say extrawind, 
>>> extrawinddir, then under [ImageGenerator] section you would have to 
>>> something like
>>>
>>> [[[dayextrawind]]]
>>> soilMoist1
>>> soilMoist2
>>>
>>> to do it for week, month, and year for week, month and year add 
>>> aggregate_type = max for week plot something like
>>>
>>> [[[weekextrawind]]]
>>> soilMoist1
>>> soilMoist2
>>> aggregate_type = max
>>>
>>> for direction an agian for week, month and year
>>> [[[dayextrawinddir]]]
>>> yscale = 0.0, 360.0, 45.0
>>> line_type = None
>>> marker_type = box
>>> marker_size = 2
>>> soilTemp4
>>>
>>> in Seasons/current.inc file after the last #end for and before  
>>> add something like
>>>
>>> 
>>>   Wind Speed
>>>   $current.soilMoist1 
>>> $current.soilTemp1.ordinal_compass ($current.soilTemp1)
>>> 
>>>
>>> no restart is needed for that just the next report cycle
>>>
>>> On Tuesday, March 1, 2022 at 10:25:22 AM UTC-6 f4n...@gmail.com wrote:
>>>
 As the database is quite new i just deleted the few soilMost3 entries 
 out and made a 

 sudo wee_database --rebuild-daily --from=2022-03-01 --to=2022-03-01 
 --config=/etc/weewx/weewx-sdr.conf

 and started weewx-sdr again, now it's looking quite good. I'm still 
 trying to figure out how to change the wind direction lines to dots?


 f4n...@gmail.com schrieb am Dienstag, 1. März 2022 um 13:37:09 UTC+1:

> That's good to know, so I have to repeat these steps after a weewx 
> update?
>
> I have it now running with the additional sensors: 
> http://meteo.fankyy.ch/WsDi1c_sdr/
> Not sure if the rain graph will only appear after it begins with rain 
> count? 
>
> I used soilMoist 1-3 for Wind, Gust and Direction, but it put all in 
> one graph, with the highest number 360 for wind direction, the speed is 
> barely visible. So i use soiltemp4 for the wind direction now and hope, 
> the 
> back-to-normal named soilMoist3 will go out of the daily graph after 24h? 
> Is there an easy way to delete it out of the database, without having to 
> examine/stopping the database for a long time?
>
> I couldn't find where tho do this step:
> then to display wind speed you would use $current.soilMoist1 in a 
> template
> and for wind dir $current.soilMoist2 and/or 
> $current.soilMoist2.ordinal_compass
> in the seasons skin
> an oldman schrieb am Sonntag, 27. Februar 2022 um 09:11:24 UTC+1:
>
>> there are other units.  just look at the schema file to see what 
>> there is.
>> if your station sends wind gust you could one that's not in use.
>> acurite 5n1 do not send wind gust just wind speed and dir.  to get 
>> the extra wind stuff i have to hack weewx files for every weewx update.
>>
>> On Sunday, February 27, 2022 at 1:33:17 AM UTC-6 f4n...@gmail.com 
>> wro

[weewx-user] Re: Multiple full sensor data with one SDR-Stick

[f4n...@gmail.com]

Thanks it worked! 

But the  tables somehow broke the 2-row listing of the graphs so i left 
it out for now. As i already got all the graphs i need. 

Will I have to do modify these files (including skin.conf, extensions.py) 
again after the update to weewx 4.7?

Your SDR setup looks very nicely tweaked. How did you get the 
snr/noise/rssi and signal quality info and how to put them into weewx? 

an oldman schrieb am Dienstag, 1. März 2022 um 23:34:06 UTC+1:

> i do not have public access to my weather page so if you want to see some 
> of it these are about a 3rd of it starting at the top
>
> On Tuesday, March 1, 2022 at 11:57:42 AM UTC-6 an oldman wrote:
>
>> in Seasons/skin.conf
>> plot_groups list the plots to show
>>
>> moistsoil shows the plots for soilMoist1-4
>> tempsoil for soilTemp1-4
>>
>> if you remove moistsoil, tempsoil from the list will stop showing the 
>> plots
>>
>> you would have to add to plot_groups the extra wind stuff say extrawind, 
>> extrawinddir, then under [ImageGenerator] section you would have to 
>> something like
>>
>> [[[dayextrawind]]]
>> soilMoist1
>> soilMoist2
>>
>> to do it for week, month, and year for week, month and year add 
>> aggregate_type = max for week plot something like
>>
>> [[[weekextrawind]]]
>> soilMoist1
>> soilMoist2
>> aggregate_type = max
>>
>> for direction an agian for week, month and year
>> [[[dayextrawinddir]]]
>> yscale = 0.0, 360.0, 45.0
>> line_type = None
>> marker_type = box
>> marker_size = 2
>> soilTemp4
>>
>> in Seasons/current.inc file after the last #end for and before  
>> add something like
>>
>> 
>>   Wind Speed
>>   $current.soilMoist1 $current.soilTemp1.ordinal_compass 
>> ($current.soilTemp1)
>> 
>>
>> no restart is needed for that just the next report cycle
>>
>> On Tuesday, March 1, 2022 at 10:25:22 AM UTC-6 f4n...@gmail.com wrote:
>>
>>> As the database is quite new i just deleted the few soilMost3 entries 
>>> out and made a 
>>>
>>> sudo wee_database --rebuild-daily --from=2022-03-01 --to=2022-03-01 
>>> --config=/etc/weewx/weewx-sdr.conf
>>>
>>> and started weewx-sdr again, now it's looking quite good. I'm still 
>>> trying to figure out how to change the wind direction lines to dots?
>>>
>>>
>>> f4n...@gmail.com schrieb am Dienstag, 1. März 2022 um 13:37:09 UTC+1:
>>>
 That's good to know, so I have to repeat these steps after a weewx 
 update?

 I have it now running with the additional sensors: 
 http://meteo.fankyy.ch/WsDi1c_sdr/
 Not sure if the rain graph will only appear after it begins with rain 
 count? 

 I used soilMoist 1-3 for Wind, Gust and Direction, but it put all in 
 one graph, with the highest number 360 for wind direction, the speed is 
 barely visible. So i use soiltemp4 for the wind direction now and hope, 
 the 
 back-to-normal named soilMoist3 will go out of the daily graph after 24h? 
 Is there an easy way to delete it out of the database, without having to 
 examine/stopping the database for a long time?

 I couldn't find where tho do this step:
 then to display wind speed you would use $current.soilMoist1 in a 
 template
 and for wind dir $current.soilMoist2 and/or 
 $current.soilMoist2.ordinal_compass
 in the seasons skin
 an oldman schrieb am Sonntag, 27. Februar 2022 um 09:11:24 UTC+1:

> there are other units.  just look at the schema file to see what there 
> is.
> if your station sends wind gust you could one that's not in use.
> acurite 5n1 do not send wind gust just wind speed and dir.  to get the 
> extra wind stuff i have to hack weewx files for every weewx update.
>
> On Sunday, February 27, 2022 at 1:33:17 AM UTC-6 f4n...@gmail.com 
> wrote:
>
>> That would be a good and much simpler solution if it works, will 
>> definitely try this. Is there some unit remaining which i could use for 
>> wind_gust?
>>
>> Thanks a lot!
>>
>> an oldman schrieb am Samstag, 26. Februar 2022 um 23:47:49 UTC+1:
>>
>>> you could try something like in this if
>>> soilMoist1, soilMoist2, extraTemp1, extraHumid1, windBatteryStatus 
>>> and hail are unsed
>>>
>>> in weewx.conf
>>> [SDR]
>>> [[sensor_map]]
>>> soilMoist1 = wind_speed.1276.Acurite5n1PacketV2
>>> soilMoist2 = wind_dir.1276.Acurite5n1PacketV2
>>> extraTemp1 = temperature.1276.Acurite5n1PacketV2
>>> extraHumid1 = humidity.1276.Acurite5n1PacketV2
>>> windBatteryStatus = battery.1276.Acurite5n1PacketV2
>>> hail_total = rain_total.1276.Acurite5n1PacketV2
>>> [[deltas]]
>>> hail = hail_total
>>>
>>> [Accumulator]
>>> [[hail]]
>>> extractor = sum
>>>
>>> and in extensions.py
>>> import weewx.units
>>> weewx.units.obs_group_dict['soilMoist1'] = 'g

[weewx-user] Re: Multiple full sensor data with one SDR-Stick

[an oldman]

in Seasons/skin.conf
plot_groups list the plots to show

moistsoil shows the plots for soilMoist1-4
tempsoil for soilTemp1-4

if you remove moistsoil, tempsoil from the list will stop showing the plots

you would have to add to plot_groups the extra wind stuff say extrawind, 
extrawinddir, then under [ImageGenerator] section you would have to 
something like

[[[dayextrawind]]]
soilMoist1
soilMoist2

to do it for week, month, and year for week, month and year add 
aggregate_type = max for week plot something like

[[[weekextrawind]]]
soilMoist1
soilMoist2
aggregate_type = max

for direction an agian for week, month and year
[[[dayextrawinddir]]]
yscale = 0.0, 360.0, 45.0
line_type = None
marker_type = box
marker_size = 2
soilTemp4

in Seasons/current.inc file after the last #end for and before  add 
something like


  Wind Speed
  $current.soilMoist1 $current.soilTemp1.ordinal_compass 
($current.soilTemp1)


no restart is needed for that just the next report cycle

On Tuesday, March 1, 2022 at 10:25:22 AM UTC-6 f4n...@gmail.com wrote:

> As the database is quite new i just deleted the few soilMost3 entries out 
> and made a 
>
> sudo wee_database --rebuild-daily --from=2022-03-01 --to=2022-03-01 
> --config=/etc/weewx/weewx-sdr.conf
>
> and started weewx-sdr again, now it's looking quite good. I'm still trying 
> to figure out how to change the wind direction lines to dots?
>
>
> f4n...@gmail.com schrieb am Dienstag, 1. März 2022 um 13:37:09 UTC+1:
>
>> That's good to know, so I have to repeat these steps after a weewx update?
>>
>> I have it now running with the additional sensors: 
>> http://meteo.fankyy.ch/WsDi1c_sdr/
>> Not sure if the rain graph will only appear after it begins with rain 
>> count? 
>>
>> I used soilMoist 1-3 for Wind, Gust and Direction, but it put all in one 
>> graph, with the highest number 360 for wind direction, the speed is barely 
>> visible. So i use soiltemp4 for the wind direction now and hope, the 
>> back-to-normal named soilMoist3 will go out of the daily graph after 24h? 
>> Is there an easy way to delete it out of the database, without having to 
>> examine/stopping the database for a long time?
>>
>> I couldn't find where tho do this step:
>> then to display wind speed you would use $current.soilMoist1 in a template
>> and for wind dir $current.soilMoist2 and/or 
>> $current.soilMoist2.ordinal_compass
>> in the seasons skin
>> an oldman schrieb am Sonntag, 27. Februar 2022 um 09:11:24 UTC+1:
>>
>>> there are other units.  just look at the schema file to see what there 
>>> is.
>>> if your station sends wind gust you could one that's not in use.
>>> acurite 5n1 do not send wind gust just wind speed and dir.  to get the 
>>> extra wind stuff i have to hack weewx files for every weewx update.
>>>
>>> On Sunday, February 27, 2022 at 1:33:17 AM UTC-6 f4n...@gmail.com wrote:
>>>
 That would be a good and much simpler solution if it works, will 
 definitely try this. Is there some unit remaining which i could use for 
 wind_gust?

 Thanks a lot!

 an oldman schrieb am Samstag, 26. Februar 2022 um 23:47:49 UTC+1:

> you could try something like in this if
> soilMoist1, soilMoist2, extraTemp1, extraHumid1, windBatteryStatus and 
> hail are unsed
>
> in weewx.conf
> [SDR]
> [[sensor_map]]
> soilMoist1 = wind_speed.1276.Acurite5n1PacketV2
> soilMoist2 = wind_dir.1276.Acurite5n1PacketV2
> extraTemp1 = temperature.1276.Acurite5n1PacketV2
> extraHumid1 = humidity.1276.Acurite5n1PacketV2
> windBatteryStatus = battery.1276.Acurite5n1PacketV2
> hail_total = rain_total.1276.Acurite5n1PacketV2
> [[deltas]]
> hail = hail_total
>
> [Accumulator]
> [[hail]]
> extractor = sum
>
> and in extensions.py
> import weewx.units
> weewx.units.obs_group_dict['soilMoist1'] = 'group_speed'
> weewx.units.obs_group_dict['soilMoist2'] = 'group_direction'
>
> then to display wind speed you would use $current.soilMoist1 in a 
> template
> and for wind dir $current.soilMoist2 and/or 
> $current.soilMoist2.ordinal_compass
>
> not shure where to change the labels at but i think in 4.6.2 it is in 
> the lang files
> say in en.conf
> [Labels]
> [[Generic]]
> soilMoist1 = Wind Speed (5n1)
> soilMoist2 = Wind Direction (5n1)
> windBatteryStatus = Battery (5n1)
> hail = Rain (5n1)
> $obs.label.soilMoist1 should show Wind Speed (5n1) and so on.
>
> On Saturday, February 26, 2022 at 11:27:03 AM UTC-6 an oldman wrote:
>
>> that config won't work with your set up, had to add a lot to the sdr 
>> driver for sensors, make some extension, add to the schema and 
>> user/extensions.py file and change some weewx core fi

[weewx-user] Re: Multiple full sensor data with one SDR-Stick

[f4n...@gmail.com]

As the database is quite new i just deleted the few soilMost3 entries out 
and made a 

sudo wee_database --rebuild-daily --from=2022-03-01 --to=2022-03-01 
--config=/etc/weewx/weewx-sdr.conf

and started weewx-sdr again, now it's looking quite good. I'm still trying 
to figure out how to change the wind direction lines to dots?


f4n...@gmail.com schrieb am Dienstag, 1. März 2022 um 13:37:09 UTC+1:

> That's good to know, so I have to repeat these steps after a weewx update?
>
> I have it now running with the additional sensors: 
> http://meteo.fankyy.ch/WsDi1c_sdr/
> Not sure if the rain graph will only appear after it begins with rain 
> count? 
>
> I used soilMoist 1-3 for Wind, Gust and Direction, but it put all in one 
> graph, with the highest number 360 for wind direction, the speed is barely 
> visible. So i use soiltemp4 for the wind direction now and hope, the 
> back-to-normal named soilMoist3 will go out of the daily graph after 24h? 
> Is there an easy way to delete it out of the database, without having to 
> examine/stopping the database for a long time?
>
> I couldn't find where tho do this step:
> then to display wind speed you would use $current.soilMoist1 in a template
> and for wind dir $current.soilMoist2 and/or 
> $current.soilMoist2.ordinal_compass
> in the seasons skin
> an oldman schrieb am Sonntag, 27. Februar 2022 um 09:11:24 UTC+1:
>
>> there are other units.  just look at the schema file to see what there is.
>> if your station sends wind gust you could one that's not in use.
>> acurite 5n1 do not send wind gust just wind speed and dir.  to get the 
>> extra wind stuff i have to hack weewx files for every weewx update.
>>
>> On Sunday, February 27, 2022 at 1:33:17 AM UTC-6 f4n...@gmail.com wrote:
>>
>>> That would be a good and much simpler solution if it works, will 
>>> definitely try this. Is there some unit remaining which i could use for 
>>> wind_gust?
>>>
>>> Thanks a lot!
>>>
>>> an oldman schrieb am Samstag, 26. Februar 2022 um 23:47:49 UTC+1:
>>>
 you could try something like in this if
 soilMoist1, soilMoist2, extraTemp1, extraHumid1, windBatteryStatus and 
 hail are unsed

 in weewx.conf
 [SDR]
 [[sensor_map]]
 soilMoist1 = wind_speed.1276.Acurite5n1PacketV2
 soilMoist2 = wind_dir.1276.Acurite5n1PacketV2
 extraTemp1 = temperature.1276.Acurite5n1PacketV2
 extraHumid1 = humidity.1276.Acurite5n1PacketV2
 windBatteryStatus = battery.1276.Acurite5n1PacketV2
 hail_total = rain_total.1276.Acurite5n1PacketV2
 [[deltas]]
 hail = hail_total

 [Accumulator]
 [[hail]]
 extractor = sum

 and in extensions.py
 import weewx.units
 weewx.units.obs_group_dict['soilMoist1'] = 'group_speed'
 weewx.units.obs_group_dict['soilMoist2'] = 'group_direction'

 then to display wind speed you would use $current.soilMoist1 in a 
 template
 and for wind dir $current.soilMoist2 and/or 
 $current.soilMoist2.ordinal_compass

 not shure where to change the labels at but i think in 4.6.2 it is in 
 the lang files
 say in en.conf
 [Labels]
 [[Generic]]
 soilMoist1 = Wind Speed (5n1)
 soilMoist2 = Wind Direction (5n1)
 windBatteryStatus = Battery (5n1)
 hail = Rain (5n1)
 $obs.label.soilMoist1 should show Wind Speed (5n1) and so on.

 On Saturday, February 26, 2022 at 11:27:03 AM UTC-6 an oldman wrote:

> that config won't work with your set up, had to add a lot to the sdr 
> driver for sensors, make some extension, add to the schema and 
> user/extensions.py file and change some weewx core files.
> look in the wiki under data management Switching to the new, extended 
> schema wview_extended 
> 
> .
>
>
> On Saturday, February 26, 2022 at 10:53:58 AM UTC-6 f4n...@gmail.com 
> wrote:
>
>> Now that's really great, thanks for the config. Where or how exactly 
>> do i have to add the entrys in the schema file?
>>
>> an oldman schrieb am Samstag, 26. Februar 2022 um 16:41:11 UTC+1:
>>
>>> I have
>>> here is my sdr from weewx.conf
>>> extraTemp, batteryStatus, extraHumid1 - 8 are in the 
>>> wview_extended.py schema.
>>> I had to add to the schema extrawindSpeed, extrawindDir, 
>>> lightning_distance15, lightning_strike_count15 and extraTemp, 
>>> batteryStatus, extraHumid 9 - 16.
>>> Had a 3rd 5n1 but a hail storm took out 2 5n1s, had to combine them 
>>> to get 1 working 5n1.
>>>
>>> On Saturday, February 26, 2022 at 2:51:21 AM UTC-6 f4n...@gmail.com 
>>> wrote:
>>>
 Would it be possible to record data from two or more full sensor 
 arrays (including wind and rain) in one weewx instance? Or record the 
 da

[weewx-user] Re: Multiple full sensor data with one SDR-Stick

[f4n...@gmail.com]

That's good to know, so I have to repeat these steps after a weewx update?

I have it now running with the additional 
sensors: http://meteo.fankyy.ch/WsDi1c_sdr/
Not sure if the rain graph will only appear after it begins with rain 
count? 

I used soilMoist 1-3 for Wind, Gust and Direction, but it put all in one 
graph, with the highest number 360 for wind direction, the speed is barely 
visible. So i use soiltemp4 for the wind direction now and hope, the 
back-to-normal named soilMoist3 will go out of the daily graph after 24h? 
Is there an easy way to delete it out of the database, without having to 
examine/stopping the database for a long time?

I couldn't find where tho do this step:
then to display wind speed you would use $current.soilMoist1 in a template
and for wind dir $current.soilMoist2 and/or 
$current.soilMoist2.ordinal_compass
in the seasons skin
an oldman schrieb am Sonntag, 27. Februar 2022 um 09:11:24 UTC+1:

> there are other units.  just look at the schema file to see what there is.
> if your station sends wind gust you could one that's not in use.
> acurite 5n1 do not send wind gust just wind speed and dir.  to get the 
> extra wind stuff i have to hack weewx files for every weewx update.
>
> On Sunday, February 27, 2022 at 1:33:17 AM UTC-6 f4n...@gmail.com wrote:
>
>> That would be a good and much simpler solution if it works, will 
>> definitely try this. Is there some unit remaining which i could use for 
>> wind_gust?
>>
>> Thanks a lot!
>>
>> an oldman schrieb am Samstag, 26. Februar 2022 um 23:47:49 UTC+1:
>>
>>> you could try something like in this if
>>> soilMoist1, soilMoist2, extraTemp1, extraHumid1, windBatteryStatus and 
>>> hail are unsed
>>>
>>> in weewx.conf
>>> [SDR]
>>> [[sensor_map]]
>>> soilMoist1 = wind_speed.1276.Acurite5n1PacketV2
>>> soilMoist2 = wind_dir.1276.Acurite5n1PacketV2
>>> extraTemp1 = temperature.1276.Acurite5n1PacketV2
>>> extraHumid1 = humidity.1276.Acurite5n1PacketV2
>>> windBatteryStatus = battery.1276.Acurite5n1PacketV2
>>> hail_total = rain_total.1276.Acurite5n1PacketV2
>>> [[deltas]]
>>> hail = hail_total
>>>
>>> [Accumulator]
>>> [[hail]]
>>> extractor = sum
>>>
>>> and in extensions.py
>>> import weewx.units
>>> weewx.units.obs_group_dict['soilMoist1'] = 'group_speed'
>>> weewx.units.obs_group_dict['soilMoist2'] = 'group_direction'
>>>
>>> then to display wind speed you would use $current.soilMoist1 in a 
>>> template
>>> and for wind dir $current.soilMoist2 and/or 
>>> $current.soilMoist2.ordinal_compass
>>>
>>> not shure where to change the labels at but i think in 4.6.2 it is in 
>>> the lang files
>>> say in en.conf
>>> [Labels]
>>> [[Generic]]
>>> soilMoist1 = Wind Speed (5n1)
>>> soilMoist2 = Wind Direction (5n1)
>>> windBatteryStatus = Battery (5n1)
>>> hail = Rain (5n1)
>>> $obs.label.soilMoist1 should show Wind Speed (5n1) and so on.
>>>
>>> On Saturday, February 26, 2022 at 11:27:03 AM UTC-6 an oldman wrote:
>>>
 that config won't work with your set up, had to add a lot to the sdr 
 driver for sensors, make some extension, add to the schema and 
 user/extensions.py file and change some weewx core files.
 look in the wiki under data management Switching to the new, extended 
 schema wview_extended 
 
 .


 On Saturday, February 26, 2022 at 10:53:58 AM UTC-6 f4n...@gmail.com 
 wrote:

> Now that's really great, thanks for the config. Where or how exactly 
> do i have to add the entrys in the schema file?
>
> an oldman schrieb am Samstag, 26. Februar 2022 um 16:41:11 UTC+1:
>
>> I have
>> here is my sdr from weewx.conf
>> extraTemp, batteryStatus, extraHumid1 - 8 are in the 
>> wview_extended.py schema.
>> I had to add to the schema extrawindSpeed, extrawindDir, 
>> lightning_distance15, lightning_strike_count15 and extraTemp, 
>> batteryStatus, extraHumid 9 - 16.
>> Had a 3rd 5n1 but a hail storm took out 2 5n1s, had to combine them 
>> to get 1 working 5n1.
>>
>> On Saturday, February 26, 2022 at 2:51:21 AM UTC-6 f4n...@gmail.com 
>> wrote:
>>
>>> Would it be possible to record data from two or more full sensor 
>>> arrays (including wind and rain) in one weewx instance? Or record the 
>>> data 
>>> in multiple weewx instances with only one SDR-stick? 
>>>
>>> I know multiple SDR sticks to multiple weewx instances is possible, 
>>> but how could it be done with just one stick? 
>>>
>>> I already achieved to get the temperature from a second sensor with 
>>> the extraTempSensor value in the sensor map, but i guess this wouldn't 
>>> work 
>>> for wind and rain? It seems like it would need basically only an 
>>> adaption 
>>> to the schema and database, but to edit these se

[weewx-user] Re: Multiple full sensor data with one SDR-Stick

[an oldman]

there are other units.  just look at the schema file to see what there is.
if your station sends wind gust you could one that's not in use.
acurite 5n1 do not send wind gust just wind speed and dir.  to get the 
extra wind stuff i have to hack weewx files for every weewx update.

On Sunday, February 27, 2022 at 1:33:17 AM UTC-6 f4n...@gmail.com wrote:

> That would be a good and much simpler solution if it works, will 
> definitely try this. Is there some unit remaining which i could use for 
> wind_gust?
>
> Thanks a lot!
>
> an oldman schrieb am Samstag, 26. Februar 2022 um 23:47:49 UTC+1:
>
>> you could try something like in this if
>> soilMoist1, soilMoist2, extraTemp1, extraHumid1, windBatteryStatus and 
>> hail are unsed
>>
>> in weewx.conf
>> [SDR]
>> [[sensor_map]]
>> soilMoist1 = wind_speed.1276.Acurite5n1PacketV2
>> soilMoist2 = wind_dir.1276.Acurite5n1PacketV2
>> extraTemp1 = temperature.1276.Acurite5n1PacketV2
>> extraHumid1 = humidity.1276.Acurite5n1PacketV2
>> windBatteryStatus = battery.1276.Acurite5n1PacketV2
>> hail_total = rain_total.1276.Acurite5n1PacketV2
>> [[deltas]]
>> hail = hail_total
>>
>> [Accumulator]
>> [[hail]]
>> extractor = sum
>>
>> and in extensions.py
>> import weewx.units
>> weewx.units.obs_group_dict['soilMoist1'] = 'group_speed'
>> weewx.units.obs_group_dict['soilMoist2'] = 'group_direction'
>>
>> then to display wind speed you would use $current.soilMoist1 in a template
>> and for wind dir $current.soilMoist2 and/or 
>> $current.soilMoist2.ordinal_compass
>>
>> not shure where to change the labels at but i think in 4.6.2 it is in the 
>> lang files
>> say in en.conf
>> [Labels]
>> [[Generic]]
>> soilMoist1 = Wind Speed (5n1)
>> soilMoist2 = Wind Direction (5n1)
>> windBatteryStatus = Battery (5n1)
>> hail = Rain (5n1)
>> $obs.label.soilMoist1 should show Wind Speed (5n1) and so on.
>>
>> On Saturday, February 26, 2022 at 11:27:03 AM UTC-6 an oldman wrote:
>>
>>> that config won't work with your set up, had to add a lot to the sdr 
>>> driver for sensors, make some extension, add to the schema and 
>>> user/extensions.py file and change some weewx core files.
>>> look in the wiki under data management Switching to the new, extended 
>>> schema wview_extended 
>>> 
>>> .
>>>
>>>
>>> On Saturday, February 26, 2022 at 10:53:58 AM UTC-6 f4n...@gmail.com 
>>> wrote:
>>>
 Now that's really great, thanks for the config. Where or how exactly do 
 i have to add the entrys in the schema file?

 an oldman schrieb am Samstag, 26. Februar 2022 um 16:41:11 UTC+1:

> I have
> here is my sdr from weewx.conf
> extraTemp, batteryStatus, extraHumid1 - 8 are in the wview_extended.py 
> schema.
> I had to add to the schema extrawindSpeed, extrawindDir, 
> lightning_distance15, lightning_strike_count15 and extraTemp, 
> batteryStatus, extraHumid 9 - 16.
> Had a 3rd 5n1 but a hail storm took out 2 5n1s, had to combine them to 
> get 1 working 5n1.
>
> On Saturday, February 26, 2022 at 2:51:21 AM UTC-6 f4n...@gmail.com 
> wrote:
>
>> Would it be possible to record data from two or more full sensor 
>> arrays (including wind and rain) in one weewx instance? Or record the 
>> data 
>> in multiple weewx instances with only one SDR-stick? 
>>
>> I know multiple SDR sticks to multiple weewx instances is possible, 
>> but how could it be done with just one stick? 
>>
>> I already achieved to get the temperature from a second sensor with 
>> the extraTempSensor value in the sensor map, but i guess this wouldn't 
>> work 
>> for wind and rain? It seems like it would need basically only an 
>> adaption 
>> to the schema and database, but to edit these seems a bit complex for 
>> me, 
>> has anyone ever done this?
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/19543de6-8bf8-4f7f-b8ed-ed78ba7a1d41n%40googlegroups.com.

[weewx-user] Re: Multiple full sensor data with one SDR-Stick

[f4n...@gmail.com]

That would be a good and much simpler solution if it works, will definitely 
try this. Is there some unit remaining which i could use for wind_gust?

Thanks a lot!

an oldman schrieb am Samstag, 26. Februar 2022 um 23:47:49 UTC+1:

> you could try something like in this if
> soilMoist1, soilMoist2, extraTemp1, extraHumid1, windBatteryStatus and 
> hail are unsed
>
> in weewx.conf
> [SDR]
> [[sensor_map]]
> soilMoist1 = wind_speed.1276.Acurite5n1PacketV2
> soilMoist2 = wind_dir.1276.Acurite5n1PacketV2
> extraTemp1 = temperature.1276.Acurite5n1PacketV2
> extraHumid1 = humidity.1276.Acurite5n1PacketV2
> windBatteryStatus = battery.1276.Acurite5n1PacketV2
> hail_total = rain_total.1276.Acurite5n1PacketV2
> [[deltas]]
> hail = hail_total
>
> [Accumulator]
> [[hail]]
> extractor = sum
>
> and in extensions.py
> import weewx.units
> weewx.units.obs_group_dict['soilMoist1'] = 'group_speed'
> weewx.units.obs_group_dict['soilMoist2'] = 'group_direction'
>
> then to display wind speed you would use $current.soilMoist1 in a template
> and for wind dir $current.soilMoist2 and/or 
> $current.soilMoist2.ordinal_compass
>
> not shure where to change the labels at but i think in 4.6.2 it is in the 
> lang files
> say in en.conf
> [Labels]
> [[Generic]]
> soilMoist1 = Wind Speed (5n1)
> soilMoist2 = Wind Direction (5n1)
> windBatteryStatus = Battery (5n1)
> hail = Rain (5n1)
> $obs.label.soilMoist1 should show Wind Speed (5n1) and so on.
>
> On Saturday, February 26, 2022 at 11:27:03 AM UTC-6 an oldman wrote:
>
>> that config won't work with your set up, had to add a lot to the sdr 
>> driver for sensors, make some extension, add to the schema and 
>> user/extensions.py file and change some weewx core files.
>> look in the wiki under data management Switching to the new, extended 
>> schema wview_extended 
>> 
>> .
>>
>>
>> On Saturday, February 26, 2022 at 10:53:58 AM UTC-6 f4n...@gmail.com 
>> wrote:
>>
>>> Now that's really great, thanks for the config. Where or how exactly do 
>>> i have to add the entrys in the schema file?
>>>
>>> an oldman schrieb am Samstag, 26. Februar 2022 um 16:41:11 UTC+1:
>>>
 I have
 here is my sdr from weewx.conf
 extraTemp, batteryStatus, extraHumid1 - 8 are in the wview_extended.py 
 schema.
 I had to add to the schema extrawindSpeed, extrawindDir, 
 lightning_distance15, lightning_strike_count15 and extraTemp, 
 batteryStatus, extraHumid 9 - 16.
 Had a 3rd 5n1 but a hail storm took out 2 5n1s, had to combine them to 
 get 1 working 5n1.

 On Saturday, February 26, 2022 at 2:51:21 AM UTC-6 f4n...@gmail.com 
 wrote:

> Would it be possible to record data from two or more full sensor 
> arrays (including wind and rain) in one weewx instance? Or record the 
> data 
> in multiple weewx instances with only one SDR-stick? 
>
> I know multiple SDR sticks to multiple weewx instances is possible, 
> but how could it be done with just one stick? 
>
> I already achieved to get the temperature from a second sensor with 
> the extraTempSensor value in the sensor map, but i guess this wouldn't 
> work 
> for wind and rain? It seems like it would need basically only an adaption 
> to the schema and database, but to edit these seems a bit complex for me, 
> has anyone ever done this?
>


-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/93b145c4-e411-4109-8aa0-66b8c486a943n%40googlegroups.com.

[weewx-user] Re: Multiple full sensor data with one SDR-Stick

[an oldman]

you could try something like in this if
soilMoist1, soilMoist2, extraTemp1, extraHumid1, windBatteryStatus and hail 
are unsed

in weewx.conf
[SDR]
[[sensor_map]]
soilMoist1 = wind_speed.1276.Acurite5n1PacketV2
soilMoist2 = wind_dir.1276.Acurite5n1PacketV2
extraTemp1 = temperature.1276.Acurite5n1PacketV2
extraHumid1 = humidity.1276.Acurite5n1PacketV2
windBatteryStatus = battery.1276.Acurite5n1PacketV2
hail_total = rain_total.1276.Acurite5n1PacketV2
[[deltas]]
hail = hail_total

[Accumulator]
[[hail]]
extractor = sum

and in extensions.py
import weewx.units
weewx.units.obs_group_dict['soilMoist1'] = 'group_speed'
weewx.units.obs_group_dict['soilMoist2'] = 'group_direction'

then to display wind speed you would use $current.soilMoist1 in a template
and for wind dir $current.soilMoist2 and/or 
$current.soilMoist2.ordinal_compass

not shure where to change the labels at but i think in 4.6.2 it is in the 
lang files
say in en.conf
[Labels]
[[Generic]]
soilMoist1 = Wind Speed (5n1)
soilMoist2 = Wind Direction (5n1)
windBatteryStatus = Battery (5n1)
hail = Rain (5n1)
$obs.label.soilMoist1 should show Wind Speed (5n1) and so on.

On Saturday, February 26, 2022 at 11:27:03 AM UTC-6 an oldman wrote:

> that config won't work with your set up, had to add a lot to the sdr 
> driver for sensors, make some extension, add to the schema and 
> user/extensions.py file and change some weewx core files.
> look in the wiki under data management Switching to the new, extended 
> schema wview_extended 
> 
> .
>
>
> On Saturday, February 26, 2022 at 10:53:58 AM UTC-6 f4n...@gmail.com 
> wrote:
>
>> Now that's really great, thanks for the config. Where or how exactly do i 
>> have to add the entrys in the schema file?
>>
>> an oldman schrieb am Samstag, 26. Februar 2022 um 16:41:11 UTC+1:
>>
>>> I have
>>> here is my sdr from weewx.conf
>>> extraTemp, batteryStatus, extraHumid1 - 8 are in the wview_extended.py 
>>> schema.
>>> I had to add to the schema extrawindSpeed, extrawindDir, 
>>> lightning_distance15, lightning_strike_count15 and extraTemp, 
>>> batteryStatus, extraHumid 9 - 16.
>>> Had a 3rd 5n1 but a hail storm took out 2 5n1s, had to combine them to 
>>> get 1 working 5n1.
>>>
>>> On Saturday, February 26, 2022 at 2:51:21 AM UTC-6 f4n...@gmail.com 
>>> wrote:
>>>
 Would it be possible to record data from two or more full sensor arrays 
 (including wind and rain) in one weewx instance? Or record the data in 
 multiple weewx instances with only one SDR-stick? 

 I know multiple SDR sticks to multiple weewx instances is possible, but 
 how could it be done with just one stick? 

 I already achieved to get the temperature from a second sensor with the 
 extraTempSensor value in the sensor map, but i guess this wouldn't work 
 for 
 wind and rain? It seems like it would need basically only an adaption to 
 the schema and database, but to edit these seems a bit complex for me, has 
 anyone ever done this?

>>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/89b440fd-91df-4c0d-8944-35130a45ee66n%40googlegroups.com.

[weewx-user] Re: Multiple full sensor data with one SDR-Stick

[an oldman]

that config won't work with your set up, had to add a lot to the sdr driver 
for sensors, make some extension, add to the schema and user/extensions.py 
file and change some weewx core files.
look in the wiki under data management Switching to the new, extended 
schema wview_extended 

.


On Saturday, February 26, 2022 at 10:53:58 AM UTC-6 f4n...@gmail.com wrote:

> Now that's really great, thanks for the config. Where or how exactly do i 
> have to add the entrys in the schema file?
>
> an oldman schrieb am Samstag, 26. Februar 2022 um 16:41:11 UTC+1:
>
>> I have
>> here is my sdr from weewx.conf
>> extraTemp, batteryStatus, extraHumid1 - 8 are in the wview_extended.py 
>> schema.
>> I had to add to the schema extrawindSpeed, extrawindDir, 
>> lightning_distance15, lightning_strike_count15 and extraTemp, 
>> batteryStatus, extraHumid 9 - 16.
>> Had a 3rd 5n1 but a hail storm took out 2 5n1s, had to combine them to 
>> get 1 working 5n1.
>>
>> On Saturday, February 26, 2022 at 2:51:21 AM UTC-6 f4n...@gmail.com 
>> wrote:
>>
>>> Would it be possible to record data from two or more full sensor arrays 
>>> (including wind and rain) in one weewx instance? Or record the data in 
>>> multiple weewx instances with only one SDR-stick? 
>>>
>>> I know multiple SDR sticks to multiple weewx instances is possible, but 
>>> how could it be done with just one stick? 
>>>
>>> I already achieved to get the temperature from a second sensor with the 
>>> extraTempSensor value in the sensor map, but i guess this wouldn't work for 
>>> wind and rain? It seems like it would need basically only an adaption to 
>>> the schema and database, but to edit these seems a bit complex for me, has 
>>> anyone ever done this?
>>>
>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/457fe750-5878-4221-aed2-236e41daed87n%40googlegroups.com.

[weewx-user] Re: Multiple full sensor data with one SDR-Stick

[f4n...@gmail.com]

Now that's really great, thanks for the config. Where or how exactly do i 
have to add the entrys in the schema file?

an oldman schrieb am Samstag, 26. Februar 2022 um 16:41:11 UTC+1:

> I have
> here is my sdr from weewx.conf
> extraTemp, batteryStatus, extraHumid1 - 8 are in the wview_extended.py 
> schema.
> I had to add to the schema extrawindSpeed, extrawindDir, 
> lightning_distance15, lightning_strike_count15 and extraTemp, 
> batteryStatus, extraHumid 9 - 16.
> Had a 3rd 5n1 but a hail storm took out 2 5n1s, had to combine them to get 
> 1 working 5n1.
>
> On Saturday, February 26, 2022 at 2:51:21 AM UTC-6 f4n...@gmail.com wrote:
>
>> Would it be possible to record data from two or more full sensor arrays 
>> (including wind and rain) in one weewx instance? Or record the data in 
>> multiple weewx instances with only one SDR-stick? 
>>
>> I know multiple SDR sticks to multiple weewx instances is possible, but 
>> how could it be done with just one stick? 
>>
>> I already achieved to get the temperature from a second sensor with the 
>> extraTempSensor value in the sensor map, but i guess this wouldn't work for 
>> wind and rain? It seems like it would need basically only an adaption to 
>> the schema and database, but to edit these seems a bit complex for me, has 
>> anyone ever done this?
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/7248ec18-52a9-4a2b-b526-23b2833cfdb8n%40googlegroups.com.

[weewx-user] Re: Multiple full sensor data with one SDR-Stick

[an oldman]

I have
here is my sdr from weewx.conf
extraTemp, batteryStatus, extraHumid1 - 8 are in the wview_extended.py 
schema.
I had to add to the schema extrawindSpeed, extrawindDir, 
lightning_distance15, lightning_strike_count15 and extraTemp, 
batteryStatus, extraHumid 9 - 16.
Had a 3rd 5n1 but a hail storm took out 2 5n1s, had to combine them to get 
1 working 5n1.

On Saturday, February 26, 2022 at 2:51:21 AM UTC-6 f4n...@gmail.com wrote:

> Would it be possible to record data from two or more full sensor arrays 
> (including wind and rain) in one weewx instance? Or record the data in 
> multiple weewx instances with only one SDR-stick? 
>
> I know multiple SDR sticks to multiple weewx instances is possible, but 
> how could it be done with just one stick? 
>
> I already achieved to get the temperature from a second sensor with the 
> extraTempSensor value in the sensor map, but i guess this wouldn't work for 
> wind and rain? It seems like it would need basically only an adaption to 
> the schema and database, but to edit these seems a bit complex for me, has 
> anyone ever done this?
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/c4558206-426e-4be7-99d9-f733d076aac4n%40googlegroups.com.
[SDR]
# This section is for the software-defined radio driver.

# The driver to use
driver = user.sdr
# log
log_unknown_sensors = True
log_unmapped_sensors = True

# -R 40 for Acurite 592TXR Temp/Humidity, 5n1 Weather Station, 6045 
Lightning, 3N1, Atlas
# -R 73 LaCrosse Thermo-hygro Sensor 433MHz Model: TX141
# -R 74 for Acurite 00275rm,00276rm Temp/Humidity with optional probe

cmd = /usr/local/bin/rtl_433 -M utc -R 40 -R 73 -R 74-M protocol -M level 
-F json

[[sensor_map]]
# Atlas 
windDir = wind_dir.494.AcuriteAtlasPacket
windSpeed = wind_speed.494.AcuriteAtlasPacket
outTemp = temperature.494.AcuriteAtlasPacket
outHumidity = humidity.494.AcuriteAtlasPacket
rain_total = rain_total.494.AcuriteAtlasPacket
# rain = rain_total.494.AcuriteAtlasPacket
UV = uv.494.AcuriteAtlasPacket
luminosity = lux.494.AcuriteAtlasPacket
# illuminance = lux.494.AcuriteAtlasPacket
strike_total = strike_count.494.AcuriteAtlasPacket
# lightning_strike_count = strike_count.494.AcuriteAtlasPacket
distance = strike_distance.494.AcuriteAtlasPacket
lightning_distance = strike_distance.494.AcuriteAtlasPacket
# interference?
lightning_disturber_count = exception.494.AcuriteAtlasPacket
txBatteryStatus = battery.494.AcuriteAtlasPacket
rssi = rssi.494.AcuriteAtlasPacket
freq = freq.494.AcuriteAtlasPacket
snr = snr.494.AcuriteAtlasPacket
noise = noise.494.AcuriteAtlasPacket
rainin = rain_total.494.AcuriteAtlasPacket
protocol = protocol.494.AcuriteAtlasPacket
channel = channel.494.AcuriteAtlasPacket
# measuredlight = mlight.494.AcuriteAtlasPacket
mlight = mlight.494.AcuriteAtlasPacket
#  on back grage 5n1  ###
extraTemp1 = temperature.1276.Acurite5n1PacketV2
extraHumid1 = humidity.1276.Acurite5n1PacketV2
extrawindSpeed = wind_speed.1276.Acurite5n1PacketV2
extrawindDir = wind_dir.1276.Acurite5n1PacketV2
hail_total = rain_total.1276.Acurite5n1PacketV2
hailBatteryStatus = battery.1276.Acurite5n1PacketV2
# batteryStatus1 = battery.1276.Acurite5n1PacketV2
rssi1 = rssi.1276.Acurite5n1PacketV2
freq1 = freq.1276.Acurite5n1PacketV2
snr1 = snr.1276.Acurite5n1PacketV2
noise1 = noise.1276.Acurite5n1PacketV2
rainin1 = rain_total.1276.Acurite5n1PacketV2
protocol1 = protocol.1276.Acurite5n1PacketV2
channel1 = channel.1276.Acurite5n1PacketV2
#  Lightning (15)  ###
extraTemp15 = temperature.252.AcuriteLightningPacket
extraHumid15 = humidity.252.AcuriteLightningPacket
batteryStatus15 = battery.252.AcuriteLightningPacket
rssi15 = rssi.252.AcuriteLightningPacket
lightning_active15 = active.252.AcuriteLightningPacket
rfi15 = rfi.252.AcuriteLightningPacket
lightning_disturber_count15 = rfi.252.AcuriteLightningPacket
exception15 = exception.252.AcuriteLightningPacket
strikes_total15 = strikes_total.252.AcuriteLightningPacket
distance15 = distance.252.AcuriteLightningPacket
lightning_distance15 = distance.252.AcuriteLightningPacket
freq15 = freq.252.AcuriteLightningPacket
snr15 = snr.252.AcuriteLightningPacket
n