[WISPA] I've been cleaning house, anything you might need? (trango & motorola unlicensed & licensed, Cisco stuff, Watchguard stuff etc)

[Scott Carullo]

Hit me off list

Any reasonable price considered... I have to make room for something 
special and the stuff is in my way.

Trango link 10
5830APs
5830SUs
fox's (various kinds)
900APs
900SUs
2400APs
2400SUs
Multiple APEX 11Ghz links w/3ft trango or Radiowaves dishes (these are all 
operational currently work fine)

Motorola Canopy Advantage 58 APs and SUs
Canopy Advantage 900 APs adn SUs
Cluster CMM modules with GPS
PTP600 operational link including dishes radiowaves I think
PTP800 11Ghz like new used for 30 days for test with new 3ft dishes
Motorola Point-to-Point 5.8GHz. (PTP 500) Int. Antenna
Orthogon 5.8 GHz. Point-to-Point Radio Pair Int. Antenna

Mitsubishi HVAC model # PUY-A42NHA4

Cisco 2500 router
Cisco 2600 router
Cisco 3500 XL series 48 port switch
Cisco Cache Engine 500 series
Cisco 3600 Router
Cisco AS 5300 unversal access servers
Cisco 3845 Router
Cisco Catalyst Switch 3560G-48TS-E

Watchguard XTM 505 Firewall w/3-Years UTM Software (purchased 2/11)
Watchguard X1250e Firewall

Dell 2400MP DLP Projector, Mount, & Wall Screen

Scott Carullo
Technical Operations
855-FLSPEED x102


___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Trango

[Scott Carullo]

If it helps anyone, I have 50gal cans stacked with trango gear in my storage 
area.  I know the passwords on all mine :)
2.4 and 5Ghz
If anyone needs some more and can't get those to work we can probably work 
something out...

Scott Carullo
Technical Operations
855-FLSPEED x102


 From: "Victoria Proffer" 
Sent: Friday, August 31, 2012 1:42 PM
To: "WISPA General List" 
Subject: Re: [WISPA] Trango

  No reset buttons on the 5800/5830 series . you can trust me on this one .  =( 
You have to have that cable or you are SOL. RJ11 > serial port.   Victoria 
Proffer President/CEO  314-974-5600 St. Louis Broadband, LLC www. 
StLouisBroadband.comFrom: wireless-boun...@wispa.org 
[mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman
Sent: Friday, August 31, 2012 12:20 PM
To: WISPA General List
Subject: Re: [WISPA] TrangoThat's only on the FOX radios according to that 
manual.  I don't see the button on my bigger units, 5800 and 5830.Josh 
Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373

  On Fri, Aug 31, 2012 at 1:17 PM, Chuck Hogg  wrote: On 
the bottom there is a reset button under the rubber plug.   Pressing the 
reset button will reset the radio's IP address to factory default of 
192.168.100.100, and password trango.I confirmed this with the manual:  
 http://www.barco.cz/en/data/products/download/Access5830_UserManual_F.pdf 
Regards,
Chuck
  On Fri, Aug 31, 2012 at 12:13 PM, Tony C. Loosle  wrote:  
5830AP

   Chuck Hogg   Friday, August 31, 2012 9:45 AM  What model radio is 
this?   Regards,
Chuck

 ___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless  Tony C. Loosle   
Friday, August 31, 2012 9:42 AM  I need to factory reset the radio as the 
ip it was configured with was lost.

t

___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless   Sam Tetherow   
Friday, August 31, 2012 9:29 AM  Can you log in, or is that the problem?
___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless tcl   Thursday, August 
30, 2012 6:00 PM  Any old timers here remember how to reset a trango 58 
series ap?

t

___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless 
___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless   
___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless
<>
___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Wholesale dialup

[CBB - Jay Fuller]

I might can helpif my dialup provider can be reached...my accounts are 
still active

Sent from my Verizon Wireless Phone

- Reply message -
From: "Jeromie Reeves" 
Date: Fri, Aug 31, 2012 2:20 pm
Subject: [WISPA] Wholesale dialup
To: "WISPA General List" 

Anyone offer wholesale dialup or know a good place that does?

Jeormie
___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless
___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Wholesale dialup

[Jeromie Reeves]

Thank you all for the information. Hopefully the very small number of
people who want it will be happy.

Jeromie
___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Wholesale dialup

[Rick Harnish]

These are a few of the most common.  There may be WISPs that will resell
dialup too.  I think Visp.net used to do it.  They are a WISPA Vendor
Member, but I do not know if they still do.

 

GlobalPOPs - Wholesale Dial-up for Carriers and ISPs

www.globalpops.com/

 

Dialup USA - Wholesale DSL, wholesale dialup, Private Labeled ...

www.dialupusa.com/

 

Wholesale Dial-Up - IKANO.com - Google Apps Solutions for Small ...

www.ikano.com/reseller/wholesaledialup.asp

 

 

  Where there is
a Wisp, there is a way!

 

Respectfully,

 

Rick Harnish

Executive Director

WISPA

260-307-4000 cell

866-317-2851 Option 2 WISPA Office

Skype: rick.harnish.

rharn...@wispa.org

adm...@wispa.org (Trina and Rick)

 

 

 

 

> -Original Message-

> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On

> Behalf Of Jeromie Reeves

> Sent: Friday, August 31, 2012 3:20 PM

> To: WISPA General List

> Subject: [WISPA] Wholesale dialup

> 

> Anyone offer wholesale dialup or know a good place that does?

> 

> Jeormie

> ___

> Wireless mailing list

>   Wireless@wispa.org

>  
http://lists.wispa.org/mailman/listinfo/wireless

___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Trango

[Tony C. Loosle]

Thank you for that!  I had
 just done exactly that!

Tony




   	   
   	Michael Hughes  
  Friday, August 
31, 2012 2:30 PM
  
  

  
Hook up a serial cable, 9600 bits per
  second, no parity, 1 stop bit and no flow control.
  
  hit enter immediately on start-up to stop the boot.
  
  at the monitor prompt enter "resetpassword" (sets password to
  "trango")
  
  Enter "main" to boot.
  
  log in and set IP  (ipconfig  address  netmask  gateway)
  
  save ss
  
  reboot and proceed to configure with the web browser.
  
  Michael C. HughesCEO Antelecom, Inc.
  On 8/31/2012 1:02 PM, Tony C. Loosle wrote:



  ___Wireless 
mailing listWireless@wispa.orghttp://lists.wispa.org/mailman/listinfo/wireless
   	   
   	Tony C. Loosle  
  Friday, August 
31, 2012 2:02 PM
  

Yeah, no reset button on 
the 5830, but is on the 900ap.

With a serial and a telnet connection I think anything can be reset up. 
 Thanks for the help

t


___Wireless mailing
 listWireless@wispa.orghttp://lists.wispa.org/mailman/listinfo/wireless
   	   
   	Josh Luthman  
  Friday, August 
31, 2012 11:46 AM
  They actually starting coming 
with removable rubber doors...Josh LuthmanOffice:
 937-552-2340Direct: 937-552-23431100 Wayne StSuite 1337Troy,
 OH 45373


___Wireless mailing
 listWireless@wispa.orghttp://lists.wispa.org/mailman/listinfo/wireless
   	   
   	Chuck Hogg  
  Friday, August 
31, 2012 11:34 AM
  Now I remember that same cover 
is covered by a little steel plate on the 5GHz...thus Victoria is 
correct in that you need a serial cable to connect to it.  Per the 
manual it also states that and how to wire one if you don't have it.
Regards,Chuck


___Wireless mailing
 listWireless@wispa.orghttp://lists.wispa.org/mailman/listinfo/wireless
   	   
   	Chuck Hogg  
  Friday, August 
31, 2012 11:32 AM
  Ok, well then I don't know.  I 
thought they were the same unit as the 900's with different frequency. 
 The 900's have that port covered with a rubber grommet that has a reset
 button on the board.  The grommet also covers the LEDs.  I looked at 
the manual of the 5830AP and that looked to be the same unit.
Regards,Chuck


___Wireless mailing
 listWireless@wispa.orghttp://lists.wispa.org/mailman/listinfo/wireless


___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Trango

[Michael Hughes]

  
  
Hook up a serial cable, 9600 bits per
  second, no parity, 1 stop bit and no flow control.
  
  hit enter immediately on start-up to stop the boot.
  
  at the monitor prompt enter "resetpassword" (sets password to
  "trango")
  
  Enter "main" to boot.
  
  log in and set IP  (ipconfig  address  netmask  gateway)
  
  save ss
  
  reboot and proceed to configure with the web browser.
  
  Michael C. Hughes
CEO Antelecom, Inc.
  On 8/31/2012 1:02 PM, Tony C. Loosle wrote:


  
  Yeah, no reset button on the 5830, but is on the 900ap.
  
  With a serial and a telnet connection I think anything can be
  reset up.  Thanks for the help
  
  t
  
  

  


  Josh Luthman

  Friday,
  August 31, 2012 11:46 AM
  

They actually
  starting coming with removable rubber doors...
  
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373



  
  ___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless
  


  


  Chuck Hogg

  Friday,
  August 31, 2012 11:34 AM
  

Now I remember that
  same cover is covered by a little steel plate on the
  5GHz...thus Victoria is correct in that you need a serial
  cable to connect to it.  Per the manual it also states that
  and how to wire one if you don't have it.
  

  Regards,
  Chuck
  
  
  

  
  ___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless
  


  


  Chuck Hogg

  Friday,
  August 31, 2012 11:32 AM
  

Ok, well then I don't
  know.  I thought they were the same unit as the 900's with
  different frequency.  The 900's have that port covered with a
  rubber grommet that has a reset button on the board.  The
  grommet also covers the LEDs.  I looked at the manual of the
  5830AP and that looked to be the same unit.
  

Regards,
Chuck



  
  ___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless
  


  


  Josh Luthman

  Friday,
  August 31, 2012 11:20 AM
  

That's only on the
  FOX radios according to that manual.
  
  
  I don't see the button on my bigger units, 5800 and 5830.
  
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373



  
  ___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless
  


  


  Chuck Hogg

  Friday,
  August 31, 2012 11:17 AM
  

On the bottom there
  is a reset button under the rubber plug.
  
  
  
Pressing the reset button will reset the radio's IP
  address to factory default of 192.168.100.100, and
  password trango.
  
  

  
  I confirmed this with the manual:
  http://www.barco.cz/en/data/products/download/Access5830_UserManual_F.pdf
  
  
Regards,
Chuck



  
  ___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless
  

  
  
  
  
  ___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless



  

_

Re: [WISPA] Trango

[Tony C. Loosle]

Yeah, no reset button on 
the 5830, but is on the 900ap.

With a serial and a telnet connection I think anything can be reset up. 
 Thanks for the help

t


   	   
   	Josh Luthman  
  Friday, August 
31, 2012 11:46 AM
  They actually starting coming 
with removable rubber doors...Josh LuthmanOffice:
 937-552-2340Direct: 937-552-23431100 Wayne StSuite 1337Troy,
 OH 45373


___Wireless mailing
 listWireless@wispa.orghttp://lists.wispa.org/mailman/listinfo/wireless
   	   
   	Chuck Hogg  
  Friday, August 
31, 2012 11:34 AM
  Now I remember that same cover 
is covered by a little steel plate on the 5GHz...thus Victoria is 
correct in that you need a serial cable to connect to it.  Per the 
manual it also states that and how to wire one if you don't have it.
Regards,Chuck


___Wireless mailing
 listWireless@wispa.orghttp://lists.wispa.org/mailman/listinfo/wireless
   	   
   	Chuck Hogg  
  Friday, August 
31, 2012 11:32 AM
  Ok, well then I don't know.  I 
thought they were the same unit as the 900's with different frequency. 
 The 900's have that port covered with a rubber grommet that has a reset
 button on the board.  The grommet also covers the LEDs.  I looked at 
the manual of the 5830AP and that looked to be the same unit.
Regards,Chuck


___Wireless mailing
 listWireless@wispa.orghttp://lists.wispa.org/mailman/listinfo/wireless
   	   
   	Josh Luthman  
  Friday, August 
31, 2012 11:20 AM
  That's only on the FOX radios 
according to that manual.I don't see the button on 
my bigger units, 5800 and 5830.Josh LuthmanOffice:
 937-552-2340Direct: 937-552-2343

1100 Wayne StSuite 1337Troy, OH 45373


___Wireless mailing
 listWireless@wispa.orghttp://lists.wispa.org/mailman/listinfo/wireless
   	   
   	Chuck Hogg  
  Friday, August 
31, 2012 11:17 AM
  On the bottom there is a reset 
button under the rubber plug.Pressing the 
reset button will reset the radio's IP address to factory default of 
192.168.100.100, and password trango.
I confirmed this with the manual:http://www.barco.cz/en/data/products/download/Access5830_UserManual_F.pdf
Regards,Chuck


___Wireless mailing
 listWireless@wispa.orghttp://lists.wispa.org/mailman/listinfo/wireless


___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] What's this 900mhz Interference look like?

[Leon D. Zetekoff]

Depends up near Canada and certain other locations power on 450 is limited

Sent from my iPhone

On Aug 31, 2012, at 3:21 PM,  wrote:

> 1500 watts PEP.
> Sent from my BlackBerry®
> 
> -Original Message-
> From: Matt Jenkins 
> Sender: wireless-boun...@wispa.org
> Date: Fri, 31 Aug 2012 11:56:42 
> To: WISPA General List
> Reply-To: WISPA General List 
> Subject: Re: [WISPA] What's this 900mhz Interference look like?
> 
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
> 
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] What's this 900mhz Interference look like?

[j2840fl]

1500 watts PEP.
Sent from my BlackBerry®

-Original Message-
From: Matt Jenkins 
Sender: wireless-boun...@wispa.org
Date: Fri, 31 Aug 2012 11:56:42 
To: WISPA General List
Reply-To: WISPA General List 
Subject: Re: [WISPA] What's this 900mhz Interference look like?

___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

[WISPA] Wholesale dialup

[Jeromie Reeves]

Anyone offer wholesale dialup or know a good place that does?

Jeormie
___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] What's this 900mhz Interference look like?

[Matt Jenkins]

  
  
We have one around here too. IIRC they can do up to 50 Watts tx
power too right?


On 08/25/2012 07:39 AM, Jason Bailey
  wrote:


  

  

  Chris,I am a ham and wisp down
in Jackson. I know all to well what this is. ATV
 amateur television. I see it on mine as well. A friend
operates an amateur tv repeater on 910.250 near Lansing
and the band is OPEN lately.  I was just
changing frequencies to get around it this morning. Hit
me off-list and I can give you more info if you like.
Jason
  --- On Sat,
8/25/12, Chris Fabien  wrote:
  
From: Chris Fabien 
Subject: [WISPA] What's this 900mhz Interference look
like?
To: "WISPA General List" 
Date: Saturday, August 25, 2012, 10:16 AM

I've got an interference problem
  affecting two of my 900mhz towers.
  Attached is a Airview scan of what I'm seeing, the
  910mhz signal is
  the concern. It is intermittent, usually occurring in
  the early to mid
  morning for a few minutes or up to hours.
  
  My first thought is baby monitor/cordless phone but
  I'm seeing it on
  the south facing sector of two towers, separated by 3
  miles
  north-south distance. The south tower sees it at
  around a -60 and the
  north tower around a -70. These are 100-120ft towers
  in a heavily
  wooded area, I would not expect ground-level
  interference to be
  visible from both, right?.
  
  So, any suggestions as to possible sources? Driving
  around with an
  antenna is my next step, but hard to do on an
  intermittent signal.


-Inline Attachment Follows-

___
  Wireless mailing list
  Wireless@wispa.org
  http://lists.wispa.org/mailman/listinfo/wireless

  

  

  
  
  
  
  ___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless



  

___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Trango

[Josh Luthman]

They actually starting coming with removable rubber doors...

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373


On Fri, Aug 31, 2012 at 1:34 PM, Chuck Hogg  wrote:

> Now I remember that same cover is covered by a little steel plate on the
> 5GHz...thus Victoria is correct in that you need a serial cable to connect
> to it.  Per the manual it also states that and how to wire one if you don't
> have it.
>
> Regards,
> Chuck
>
>
>
> On Fri, Aug 31, 2012 at 1:32 PM, Chuck Hogg  wrote:
>
>> Ok, well then I don't know.  I thought they were the same unit as the
>> 900's with different frequency.  The 900's have that port covered with a
>> rubber grommet that has a reset button on the board.  The grommet also
>> covers the LEDs.  I looked at the manual of the 5830AP and that looked to
>> be the same unit.
>>
>> Regards,
>> Chuck
>>
>>
>>
>> On Fri, Aug 31, 2012 at 1:20 PM, Josh Luthman <
>> j...@imaginenetworksllc.com> wrote:
>>
>>> That's only on the FOX radios according to that manual.
>>>
>>> I don't see the button on my bigger units, 5800 and 5830.
>>>
>>> Josh Luthman
>>> Office: 937-552-2340
>>> Direct: 937-552-2343
>>> 1100 Wayne St
>>> Suite 1337
>>> Troy, OH 45373
>>>
>>>
>>> On Fri, Aug 31, 2012 at 1:17 PM, Chuck Hogg  wrote:
>>>
 On the bottom there is a reset button under the rubber plug.

 Pressing the reset button will reset the radio's IP address to factory
 default of 192.168.100.100, and password trango.

 I confirmed this with the manual:

 http://www.barco.cz/en/data/products/download/Access5830_UserManual_F.pdf

 Regards,
 Chuck



 On Fri, Aug 31, 2012 at 12:13 PM, Tony C. Loosle wrote:

> 5830AP
>
>
>
>   Chuck Hogg 
>  Friday, August 31, 2012 9:45 AM
> What model radio is this?
>
> Regards,
> Chuck
>
>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>   Tony C. Loosle 
>  Friday, August 31, 2012 9:42 AM
>  I need to factory reset the radio as the ip it was configured with
> was lost.
>
> t
>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>   Sam Tetherow 
>  Friday, August 31, 2012 9:29 AM
> Can you log in, or is that the problem?
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>   tcl 
>  Thursday, August 30, 2012 6:00 PM
> Any old timers here remember how to reset a trango 58 series ap?
>
> t
>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>

 ___
 Wireless mailing list
 Wireless@wispa.org
 http://lists.wispa.org/mailman/listinfo/wireless


>>>
>>> ___
>>> Wireless mailing list
>>> Wireless@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>
>>>
>>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>
<>___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Trango

[Victoria Proffer]

No reset buttons on the 5800/5830 series . you can trust me on this one .
=(

You have to have that cable or you are SOL.

RJ11 > serial port.

 

Victoria Proffer

President/CEO 

314-974-5600

St. Louis Broadband, LLC

  www. StLouisBroadband.com

 

From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Josh Luthman
Sent: Friday, August 31, 2012 12:20 PM
To: WISPA General List
Subject: Re: [WISPA] Trango

 

That's only on the FOX radios according to that manual.

 

I don't see the button on my bigger units, 5800 and 5830.


Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373



On Fri, Aug 31, 2012 at 1:17 PM, Chuck Hogg  wrote:

On the bottom there is a reset button under the rubber plug.

 

Pressing the reset button will reset the radio's IP address to factory
default of 192.168.100.100, and password trango.

 

I confirmed this with the manual:

http://www.barco.cz/en/data/products/download/Access5830_UserManual_F.pdf 


Regards,
Chuck





On Fri, Aug 31, 2012 at 12:13 PM, Tony C. Loosle  wrote:

5830AP








  Chuck Hogg

Friday, August 31, 2012 9:45 AM

What model radio is this?


Regards,
Chuck




___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless



  Tony C. Loosle

Friday, August 31, 2012 9:42 AM

I need to factory reset the radio as the ip it was configured with was lost.

t



___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless



  Sam Tetherow

Friday, August 31, 2012 9:29 AM

Can you log in, or is that the problem?


___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless



  tcl

Thursday, August 30, 2012 6:00 PM

Any old timers here remember how to reset a trango 58 series ap?

t


___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless


___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

 


___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

 

<>___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Wire shark !

[Sam Tetherow]

At boot there is traffic.

On 08/31/2012 11:35 AM, Josh Luthman wrote:

Are you saying the APs just randomly put packets out there?

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373


On Fri, Aug 31, 2012 at 12:31 PM, Sam Tetherow > wrote:


Pretty sure the Trango does, I know the T-LNK 11's do.


On 08/31/2012 11:22 AM, Josh Luthman wrote:


But it will not show if it doesn't put packets on the wire.

Josh Luthman
Office: 937-552-2340 
Direct: 937-552-2343 
1100 Wayne St
Suite 1337
Troy, OH 45373

On Aug 31, 2012 12:16 PM, "Eric Williams {WISP}"
mailto:w...@williamsteldata.com>> wrote:

If your looking for the IP ? plug the radio into a computer
and run wire
shark. That has work for me ! you my need a cross over cable
with Trango.

Eric Williams {W7EMW}
Williams Tel Data / SDWISP
The man with a secure wireless plan!
8130 La Mesa Bl #700
La Mesa Ca 91942
619-698-3904  {office}

___
Wireless mailing list
Wireless@wispa.org 
http://lists.wispa.org/mailman/listinfo/wireless



___
Wireless mailing list
Wireless@wispa.org  
http://lists.wispa.org/mailman/listinfo/wireless



___
Wireless mailing list
Wireless@wispa.org 
http://lists.wispa.org/mailman/listinfo/wireless




___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless


___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Trango

[Chuck Hogg]

Now I remember that same cover is covered by a little steel plate on the
5GHz...thus Victoria is correct in that you need a serial cable to connect
to it.  Per the manual it also states that and how to wire one if you don't
have it.

Regards,
Chuck


On Fri, Aug 31, 2012 at 1:32 PM, Chuck Hogg  wrote:

> Ok, well then I don't know.  I thought they were the same unit as the
> 900's with different frequency.  The 900's have that port covered with a
> rubber grommet that has a reset button on the board.  The grommet also
> covers the LEDs.  I looked at the manual of the 5830AP and that looked to
> be the same unit.
>
> Regards,
> Chuck
>
>
>
> On Fri, Aug 31, 2012 at 1:20 PM, Josh Luthman  > wrote:
>
>> That's only on the FOX radios according to that manual.
>>
>> I don't see the button on my bigger units, 5800 and 5830.
>>
>> Josh Luthman
>> Office: 937-552-2340
>> Direct: 937-552-2343
>> 1100 Wayne St
>> Suite 1337
>> Troy, OH 45373
>>
>>
>> On Fri, Aug 31, 2012 at 1:17 PM, Chuck Hogg  wrote:
>>
>>> On the bottom there is a reset button under the rubber plug.
>>>
>>> Pressing the reset button will reset the radio's IP address to factory
>>> default of 192.168.100.100, and password trango.
>>>
>>> I confirmed this with the manual:
>>> http://www.barco.cz/en/data/products/download/Access5830_UserManual_F.pdf
>>>
>>> Regards,
>>> Chuck
>>>
>>>
>>>
>>> On Fri, Aug 31, 2012 at 12:13 PM, Tony C. Loosle wrote:
>>>
 5830AP



   Chuck Hogg 
  Friday, August 31, 2012 9:45 AM
 What model radio is this?

 Regards,
 Chuck



 ___
 Wireless mailing list
 Wireless@wispa.org
 http://lists.wispa.org/mailman/listinfo/wireless
   Tony C. Loosle 
  Friday, August 31, 2012 9:42 AM
  I need to factory reset the radio as the ip it was configured with was
 lost.

 t


 ___
 Wireless mailing list
 Wireless@wispa.org
 http://lists.wispa.org/mailman/listinfo/wireless
   Sam Tetherow 
  Friday, August 31, 2012 9:29 AM
 Can you log in, or is that the problem?

 ___
 Wireless mailing list
 Wireless@wispa.org
 http://lists.wispa.org/mailman/listinfo/wireless

   tcl 
  Thursday, August 30, 2012 6:00 PM
 Any old timers here remember how to reset a trango 58 series ap?

 t


 ___
 Wireless mailing list
 Wireless@wispa.org
 http://lists.wispa.org/mailman/listinfo/wireless


 ___
 Wireless mailing list
 Wireless@wispa.org
 http://lists.wispa.org/mailman/listinfo/wireless


>>>
>>> ___
>>> Wireless mailing list
>>> Wireless@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>
>>>
>>
>> ___
>> Wireless mailing list
>> Wireless@wispa.org
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>>
>
<>___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Trango

[Chuck Hogg]

Ok, well then I don't know.  I thought they were the same unit as the 900's
with different frequency.  The 900's have that port covered with a rubber
grommet that has a reset button on the board.  The grommet also covers the
LEDs.  I looked at the manual of the 5830AP and that looked to be the same
unit.

Regards,
Chuck


On Fri, Aug 31, 2012 at 1:20 PM, Josh Luthman
wrote:

> That's only on the FOX radios according to that manual.
>
> I don't see the button on my bigger units, 5800 and 5830.
>
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
>
> On Fri, Aug 31, 2012 at 1:17 PM, Chuck Hogg  wrote:
>
>> On the bottom there is a reset button under the rubber plug.
>>
>> Pressing the reset button will reset the radio's IP address to factory
>> default of 192.168.100.100, and password trango.
>>
>> I confirmed this with the manual:
>> http://www.barco.cz/en/data/products/download/Access5830_UserManual_F.pdf
>>
>> Regards,
>> Chuck
>>
>>
>>
>> On Fri, Aug 31, 2012 at 12:13 PM, Tony C. Loosle wrote:
>>
>>> 5830AP
>>>
>>>
>>>
>>>   Chuck Hogg 
>>>  Friday, August 31, 2012 9:45 AM
>>> What model radio is this?
>>>
>>> Regards,
>>> Chuck
>>>
>>>
>>>
>>> ___
>>> Wireless mailing list
>>> Wireless@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>   Tony C. Loosle 
>>>  Friday, August 31, 2012 9:42 AM
>>>  I need to factory reset the radio as the ip it was configured with was
>>> lost.
>>>
>>> t
>>>
>>>
>>> ___
>>> Wireless mailing list
>>> Wireless@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>   Sam Tetherow 
>>>  Friday, August 31, 2012 9:29 AM
>>> Can you log in, or is that the problem?
>>>
>>> ___
>>> Wireless mailing list
>>> Wireless@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>
>>>   tcl 
>>>  Thursday, August 30, 2012 6:00 PM
>>> Any old timers here remember how to reset a trango 58 series ap?
>>>
>>> t
>>>
>>>
>>> ___
>>> Wireless mailing list
>>> Wireless@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>
>>>
>>> ___
>>> Wireless mailing list
>>> Wireless@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>
>>>
>>
>> ___
>> Wireless mailing list
>> Wireless@wispa.org
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>
<>___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Trango

[Josh Luthman]

That's only on the FOX radios according to that manual.

I don't see the button on my bigger units, 5800 and 5830.

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373


On Fri, Aug 31, 2012 at 1:17 PM, Chuck Hogg  wrote:

> On the bottom there is a reset button under the rubber plug.
>
> Pressing the reset button will reset the radio's IP address to factory
> default of 192.168.100.100, and password trango.
>
> I confirmed this with the manual:
> http://www.barco.cz/en/data/products/download/Access5830_UserManual_F.pdf
>
> Regards,
> Chuck
>
>
>
> On Fri, Aug 31, 2012 at 12:13 PM, Tony C. Loosle wrote:
>
>> 5830AP
>>
>>
>>
>>   Chuck Hogg 
>>  Friday, August 31, 2012 9:45 AM
>> What model radio is this?
>>
>> Regards,
>> Chuck
>>
>>
>>
>> ___
>> Wireless mailing list
>> Wireless@wispa.org
>> http://lists.wispa.org/mailman/listinfo/wireless
>>   Tony C. Loosle 
>>  Friday, August 31, 2012 9:42 AM
>>  I need to factory reset the radio as the ip it was configured with was
>> lost.
>>
>> t
>>
>>
>> ___
>> Wireless mailing list
>> Wireless@wispa.org
>> http://lists.wispa.org/mailman/listinfo/wireless
>>   Sam Tetherow 
>>  Friday, August 31, 2012 9:29 AM
>> Can you log in, or is that the problem?
>>
>> ___
>> Wireless mailing list
>> Wireless@wispa.org
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>>   tcl 
>>  Thursday, August 30, 2012 6:00 PM
>> Any old timers here remember how to reset a trango 58 series ap?
>>
>> t
>>
>>
>> ___
>> Wireless mailing list
>> Wireless@wispa.org
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>>
>> ___
>> Wireless mailing list
>> Wireless@wispa.org
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>
<>___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Trango

[Chuck Hogg]

On the bottom there is a reset button under the rubber plug.

Pressing the reset button will reset the radio's IP address to factory
default of 192.168.100.100, and password trango.

I confirmed this with the manual:
http://www.barco.cz/en/data/products/download/Access5830_UserManual_F.pdf

Regards,
Chuck


On Fri, Aug 31, 2012 at 12:13 PM, Tony C. Loosle  wrote:

> 5830AP
>
>
>
>   Chuck Hogg 
>  Friday, August 31, 2012 9:45 AM
> What model radio is this?
>
> Regards,
> Chuck
>
>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>   Tony C. Loosle 
>  Friday, August 31, 2012 9:42 AM
>  I need to factory reset the radio as the ip it was configured with was
> lost.
>
> t
>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>   Sam Tetherow 
>  Friday, August 31, 2012 9:29 AM
> Can you log in, or is that the problem?
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>   tcl 
>  Thursday, August 30, 2012 6:00 PM
> Any old timers here remember how to reset a trango 58 series ap?
>
> t
>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>
<>___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Wire shark !

[Eric Muehleisen]

It may not work for the device in question, but will in most cases.

-Eric
On Aug 31, 2012 11:59 AM, "Josh Luthman" 
wrote:

> I've not seen that in my testing.
>
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
>
> On Fri, Aug 31, 2012 at 12:55 PM, Eric Muehleisen wrote:
>
>> The device should send an arbitrary ARP upon bootup. This can be captured
>> via Wireshark and viewed easily with "ARP" filter.
>>
>> -Eric
>>
>>
>> On Fri, Aug 31, 2012 at 11:35 AM, Josh Luthman <
>> j...@imaginenetworksllc.com> wrote:
>>
>>> Are you saying the APs just randomly put packets out there?
>>>
>>> Josh Luthman
>>> Office: 937-552-2340
>>> Direct: 937-552-2343
>>> 1100 Wayne St
>>> Suite 1337
>>> Troy, OH 45373
>>>
>>>
>>> On Fri, Aug 31, 2012 at 12:31 PM, Sam Tetherow wrote:
>>>
  Pretty sure the Trango does, I know the T-LNK 11's do.


 On 08/31/2012 11:22 AM, Josh Luthman wrote:

 But it will not show if it doesn't put packets on the wire.

 Josh Luthman
 Office: 937-552-2340
 Direct: 937-552-2343
 1100 Wayne St
 Suite 1337
 Troy, OH 45373
 On Aug 31, 2012 12:16 PM, "Eric Williams {WISP}" <
 w...@williamsteldata.com> wrote:

> If your looking for the IP ? plug the radio into a computer and run
> wire
> shark. That has work for me ! you my need a cross over cable with
> Trango.
>
> Eric Williams {W7EMW}
> Williams Tel Data / SDWISP
> The man with a secure wireless plan!
> 8130 La Mesa Bl #700
> La Mesa Ca 91942
> 619-698-3904 {office}
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>


 ___
 Wireless mailing 
 listWireless@wispa.orghttp://lists.wispa.org/mailman/listinfo/wireless



 ___
 Wireless mailing list
 Wireless@wispa.org
 http://lists.wispa.org/mailman/listinfo/wireless


>>>
>>> ___
>>> Wireless mailing list
>>> Wireless@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>
>>>
>>
>> ___
>> Wireless mailing list
>> Wireless@wispa.org
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>
___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Wire shark !

[Josh Luthman]

I've not seen that in my testing.

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373


On Fri, Aug 31, 2012 at 12:55 PM, Eric Muehleisen wrote:

> The device should send an arbitrary ARP upon bootup. This can be captured
> via Wireshark and viewed easily with "ARP" filter.
>
> -Eric
>
>
> On Fri, Aug 31, 2012 at 11:35 AM, Josh Luthman <
> j...@imaginenetworksllc.com> wrote:
>
>> Are you saying the APs just randomly put packets out there?
>>
>> Josh Luthman
>> Office: 937-552-2340
>> Direct: 937-552-2343
>> 1100 Wayne St
>> Suite 1337
>> Troy, OH 45373
>>
>>
>> On Fri, Aug 31, 2012 at 12:31 PM, Sam Tetherow wrote:
>>
>>>  Pretty sure the Trango does, I know the T-LNK 11's do.
>>>
>>>
>>> On 08/31/2012 11:22 AM, Josh Luthman wrote:
>>>
>>> But it will not show if it doesn't put packets on the wire.
>>>
>>> Josh Luthman
>>> Office: 937-552-2340
>>> Direct: 937-552-2343
>>> 1100 Wayne St
>>> Suite 1337
>>> Troy, OH 45373
>>> On Aug 31, 2012 12:16 PM, "Eric Williams {WISP}" <
>>> w...@williamsteldata.com> wrote:
>>>
 If your looking for the IP ? plug the radio into a computer and run wire
 shark. That has work for me ! you my need a cross over cable with
 Trango.

 Eric Williams {W7EMW}
 Williams Tel Data / SDWISP
 The man with a secure wireless plan!
 8130 La Mesa Bl #700
 La Mesa Ca 91942
 619-698-3904 {office}

 ___
 Wireless mailing list
 Wireless@wispa.org
 http://lists.wispa.org/mailman/listinfo/wireless

>>>
>>>
>>> ___
>>> Wireless mailing 
>>> listWireless@wispa.orghttp://lists.wispa.org/mailman/listinfo/wireless
>>>
>>>
>>>
>>> ___
>>> Wireless mailing list
>>> Wireless@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>
>>>
>>
>> ___
>> Wireless mailing list
>> Wireless@wispa.org
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>
___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Wire shark !

[Eric Muehleisen]

The device should send an arbitrary ARP upon bootup. This can be captured
via Wireshark and viewed easily with "ARP" filter.

-Eric

On Fri, Aug 31, 2012 at 11:35 AM, Josh Luthman
wrote:

> Are you saying the APs just randomly put packets out there?
>
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
>
> On Fri, Aug 31, 2012 at 12:31 PM, Sam Tetherow wrote:
>
>>  Pretty sure the Trango does, I know the T-LNK 11's do.
>>
>>
>> On 08/31/2012 11:22 AM, Josh Luthman wrote:
>>
>> But it will not show if it doesn't put packets on the wire.
>>
>> Josh Luthman
>> Office: 937-552-2340
>> Direct: 937-552-2343
>> 1100 Wayne St
>> Suite 1337
>> Troy, OH 45373
>> On Aug 31, 2012 12:16 PM, "Eric Williams {WISP}" <
>> w...@williamsteldata.com> wrote:
>>
>>> If your looking for the IP ? plug the radio into a computer and run wire
>>> shark. That has work for me ! you my need a cross over cable with Trango.
>>>
>>> Eric Williams {W7EMW}
>>> Williams Tel Data / SDWISP
>>> The man with a secure wireless plan!
>>> 8130 La Mesa Bl #700
>>> La Mesa Ca 91942
>>> 619-698-3904 {office}
>>>
>>> ___
>>> Wireless mailing list
>>> Wireless@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>
>>
>>
>> ___
>> Wireless mailing 
>> listWireless@wispa.orghttp://lists.wispa.org/mailman/listinfo/wireless
>>
>>
>>
>> ___
>> Wireless mailing list
>> Wireless@wispa.org
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>
___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Wire shark !

[Josh Luthman]

Are you saying the APs just randomly put packets out there?

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373


On Fri, Aug 31, 2012 at 12:31 PM, Sam Tetherow  wrote:

>  Pretty sure the Trango does, I know the T-LNK 11's do.
>
>
> On 08/31/2012 11:22 AM, Josh Luthman wrote:
>
> But it will not show if it doesn't put packets on the wire.
>
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
> On Aug 31, 2012 12:16 PM, "Eric Williams {WISP}" 
> wrote:
>
>> If your looking for the IP ? plug the radio into a computer and run wire
>> shark. That has work for me ! you my need a cross over cable with Trango.
>>
>> Eric Williams {W7EMW}
>> Williams Tel Data / SDWISP
>> The man with a secure wireless plan!
>> 8130 La Mesa Bl #700
>> La Mesa Ca 91942
>> 619-698-3904 {office}
>>
>> ___
>> Wireless mailing list
>> Wireless@wispa.org
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>
>
> ___
> Wireless mailing 
> listWireless@wispa.orghttp://lists.wispa.org/mailman/listinfo/wireless
>
>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>
___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Wire shark !

[Sam Tetherow]

Pretty sure the Trango does, I know the T-LNK 11's do.

On 08/31/2012 11:22 AM, Josh Luthman wrote:


But it will not show if it doesn't put packets on the wire.

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373

On Aug 31, 2012 12:16 PM, "Eric Williams {WISP}" 
mailto:w...@williamsteldata.com>> wrote:


If your looking for the IP ? plug the radio into a computer and
run wire
shark. That has work for me ! you my need a cross over cable with
Trango.

Eric Williams {W7EMW}
Williams Tel Data / SDWISP
The man with a secure wireless plan!
8130 La Mesa Bl #700
La Mesa Ca 91942
619-698-3904  {office}

___
Wireless mailing list
Wireless@wispa.org 
http://lists.wispa.org/mailman/listinfo/wireless



___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless


___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Speed test volunteers anyone?

[Matt]

> I have just finished installing Speedtest Mini in our data center and I
> would like some help testing it.
>
> If you have a “big pipe”, it would be especially helpful to have your
> feedback.

Better off trying a 100 meg test file or iperf on linux box.

Test File:
http://www.cachefly.com/
___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Wire shark !

[Josh Luthman]

But it will not show if it doesn't put packets on the wire.

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Aug 31, 2012 12:16 PM, "Eric Williams {WISP}" 
wrote:

> If your looking for the IP ? plug the radio into a computer and run wire
> shark. That has work for me ! you my need a cross over cable with Trango.
>
> Eric Williams {W7EMW}
> Williams Tel Data / SDWISP
> The man with a secure wireless plan!
> 8130 La Mesa Bl #700
> La Mesa Ca 91942
> 619-698-3904 {office}
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

[WISPA] Wire shark !

[Eric Williams {WISP}]

If your looking for the IP ? plug the radio into a computer and run wire 
shark. That has work for me ! you my need a cross over cable with Trango.

Eric Williams {W7EMW}
Williams Tel Data / SDWISP
The man with a secure wireless plan!
8130 La Mesa Bl #700
La Mesa Ca 91942
619-698-3904 {office} 

___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Trango

[Tony C. Loosle]

5830AP




   	   
   	Chuck Hogg  
  Friday, August 
31, 2012 9:45 AM
  What model radio is this?Regards,Chuck


___Wireless mailing
 listWireless@wispa.orghttp://lists.wispa.org/mailman/listinfo/wireless
   	   
   	Tony C. Loosle  
  Friday, August 
31, 2012 9:42 AM
  

I need to factory reset 
the radio as the ip it was configured with was lost.

t



___Wireless mailing
 listWireless@wispa.orghttp://lists.wispa.org/mailman/listinfo/wireless
   	   
   	Sam Tetherow  
  Friday, August 
31, 2012 9:29 AM
  Can you log in, or is that
 the problem?___Wireless
 mailing listWireless@wispa.orghttp://lists.wispa.org/mailman/listinfo/wireless
   	   
   	tcl  
  Thursday, August 
30, 2012 6:00 PM
  Any old timers here 
remember how to reset a trango 58 series ap?t___Wireless
 mailing listWireless@wispa.orghttp://lists.wispa.org/mailman/listinfo/wireless


___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Trango

[Josh Luthman]

Grab a new one, configure it, swap it.  Then you can bust out the rj11
crimpers and make yourself a com cable.

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373


On Fri, Aug 31, 2012 at 11:42 AM, Tony C. Loosle  wrote:

> I need to factory reset the radio as the ip it was configured with was
> lost.
>
> t
>
>
>   Sam Tetherow 
>  Friday, August 31, 2012 9:29 AM
> Can you log in, or is that the problem?
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>   tcl 
>  Thursday, August 30, 2012 6:00 PM
> Any old timers here remember how to reset a trango 58 series ap?
>
> t
>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>
<>___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Trango

[Chuck Hogg]

What model radio is this?

Regards,
Chuck


On Fri, Aug 31, 2012 at 11:42 AM, Tony C. Loosle  wrote:

> I need to factory reset the radio as the ip it was configured with was
> lost.
>
> t
>
>
>   Sam Tetherow 
>  Friday, August 31, 2012 9:29 AM
> Can you log in, or is that the problem?
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>   tcl 
>  Thursday, August 30, 2012 6:00 PM
> Any old timers here remember how to reset a trango 58 series ap?
>
> t
>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>
<>___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Trango

[Tony C. Loosle]

I need to factory reset 
the radio as the ip it was configured with was lost.

t



   	   
   	Sam Tetherow  
  Friday, August 
31, 2012 9:29 AM
  Can you log in, or is that
 the problem?___Wireless
 mailing listWireless@wispa.orghttp://lists.wispa.org/mailman/listinfo/wireless
   	   
   	tcl  
  Thursday, August 
30, 2012 6:00 PM
  Any old timers here 
remember how to reset a trango 58 series ap?t___Wireless
 mailing listWireless@wispa.orghttp://lists.wispa.org/mailman/listinfo/wireless


___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Trango

[Josh Luthman]

No, just means you know your stuff.

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373


On Fri, Aug 31, 2012 at 11:42 AM, Victoria Proffer <
victo...@stlbroadband.com> wrote:

> Does this mean I am an old timer ... =(
>
> ~V~
>
>
> -Original Message-
> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
> Behalf Of Victoria Proffer
> Sent: Friday, August 31, 2012 10:35 AM
> To: 'WISPA General List'
> Subject: Re: [WISPA] Trango
>
> You have to have the serial cable ...
>
> Victoria Proffer
> President/CEO
> 314-974-5600
> St. Louis Broadband, LLC
> www. StLouisBroadband.com
>
> -Original Message-
> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
> Behalf Of Sam Tetherow
> Sent: Friday, August 31, 2012 10:30 AM
> To: WISPA General List
> Subject: Re: [WISPA] Trango
>
> Can you log in, or is that the problem?
>
> On 08/30/2012 07:00 PM, tcl wrote:
> > Any old timers here remember how to reset a trango 58 series ap?
> >
> > t
> >
> >
> > ___
> > Wireless mailing list
> > Wireless@wispa.org
> > http://lists.wispa.org/mailman/listinfo/wireless
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Speed test volunteers anyone?

[Josh Luthman]

> No network address translation appliance was detected.

It's Java and couldn't see that my machine was in 10.0.0.0/8 ?

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373


On Fri, Aug 31, 2012 at 11:38 AM, Victoria Proffer <
victo...@stlbroadband.com> wrote:

> Nice Sascha!
>
> I like the advanced features of this ap: http://measurementlab.net/run-ndt
>
> Victoria Proffer
> President/CEO
> 314-974-5600
> St. Louis Broadband, LLC
> www. StLouisBroadband.com
>
>
> -Original Message-
> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
> Behalf Of Sascha Meinrath
> Sent: Friday, August 31, 2012 8:01 AM
> To: wireless@wispa.org
> Subject: Re: [WISPA] Speed test volunteers anyone?
>
> Hi all,
>
> I'd be curious if folks have tried using the measurementlab.net speed test
> and what you're getting from this platform.
>
> Let me know,
>
> --Sascha
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Trango

[Victoria Proffer]

Does this mean I am an old timer ... =(

~V~


-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Victoria Proffer
Sent: Friday, August 31, 2012 10:35 AM
To: 'WISPA General List'
Subject: Re: [WISPA] Trango

You have to have the serial cable ...

Victoria Proffer
President/CEO
314-974-5600
St. Louis Broadband, LLC
www. StLouisBroadband.com

-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Sam Tetherow
Sent: Friday, August 31, 2012 10:30 AM
To: WISPA General List
Subject: Re: [WISPA] Trango

Can you log in, or is that the problem?

On 08/30/2012 07:00 PM, tcl wrote:
> Any old timers here remember how to reset a trango 58 series ap?
>
> t
>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless

___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Speed test volunteers anyone?

[Victoria Proffer]

Nice Sascha!

I like the advanced features of this ap: http://measurementlab.net/run-ndt

Victoria Proffer
President/CEO 
314-974-5600
St. Louis Broadband, LLC
www. StLouisBroadband.com


-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Sascha Meinrath
Sent: Friday, August 31, 2012 8:01 AM
To: wireless@wispa.org
Subject: Re: [WISPA] Speed test volunteers anyone?

Hi all,

I'd be curious if folks have tried using the measurementlab.net speed test
and what you're getting from this platform.

Let me know,

--Sascha
___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Trango

[Victoria Proffer]

You have to have the serial cable ...

Victoria Proffer
President/CEO 
314-974-5600
St. Louis Broadband, LLC
www. StLouisBroadband.com

-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Sam Tetherow
Sent: Friday, August 31, 2012 10:30 AM
To: WISPA General List
Subject: Re: [WISPA] Trango

Can you log in, or is that the problem?

On 08/30/2012 07:00 PM, tcl wrote:
> Any old timers here remember how to reset a trango 58 series ap?
>
> t
>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless

___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Trango

[Chuck Hogg]

Reset button?

Regards,
Chuck


On Thu, Aug 30, 2012 at 8:00 PM, tcl  wrote:

> Any old timers here remember how to reset a trango 58 series ap?
>
> t
>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Trango

[Sam Tetherow]

Can you log in, or is that the problem?

On 08/30/2012 07:00 PM, tcl wrote:
> Any old timers here remember how to reset a trango 58 series ap?
>
> t
>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless

___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Trango

[Josh Luthman]

You mean "reboot"?

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373


On Thu, Aug 30, 2012 at 8:00 PM, tcl  wrote:

> Any old timers here remember how to reset a trango 58 series ap?
>
> t
>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Speed test volunteers anyone?

[Sascha Meinrath]

Hi all,

I'd be curious if folks have tried using the measurementlab.net speed test and
what you're getting from this platform.

Let me know,

--Sascha
___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

[WISPA] Trango

[tcl]

Any old timers here remember how to reset a trango 58 series ap?

t


___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

[WISPA] Need Trango Giga

[Ed Spoon - CSS, Inc.]

Anyone have an original Trango GigaLink "Giga18-ODU-1A", please hit me off list.

Thanks
ed.sp...@cssla.com
Ed Spoon | Manager of Internet Services | triparish.net 
/ cajun.net
Computer Sales & Services, Inc. | Ph: 985-879-3219 / Fax: 
985-876-6789
[Description: http://www.triparish.net/Media/CSSlogo256.bmp]


<>___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Speed test volunteers anyone?

[Steve Barnes]

Ralph as you can see the issue is not how it works out of you network but how 
it works in your network.  You are getting every kind of answer depending on 
where the tester is and what the path looks like between you and them.  Like 
your text says this pretty close measures the speed on your network.

Looks good and good text.

Steve Barnes
General Manager
PCS-WIN / RC-WiFi

From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf 
Of Ralph
Sent: Thursday, August 30, 2012 7:08 PM
To: 'WISPA General List'
Subject: Re: [WISPA] Speed test volunteers anyone?

Oops  again. Sorry, I changed the text of the link but not the link.

http://brightlan.net/page26.html



From: wireless-boun...@wispa.org 
[mailto:wireless-boun...@wispa.org] 
On Behalf Of Ralph
Sent: Thursday, August 30, 2012 7:04 PM
To: 'WISPA General List'
Subject: Re: [WISPA] Speed test volunteers anyone?

Duh. Sorry.
http://brightlan.net/page26.html


From: wireless-boun...@wispa.org 
[mailto:wireless-boun...@wispa.org] On Behalf Of Ralph
Sent: Thursday, August 30, 2012 6:56 PM
To: 'WISPA General List'
Subject: [WISPA] Speed test volunteers anyone?

I have just finished installing Speedtest Mini in our data center and I would 
like some help testing it.
If you have a "big pipe", it would be especially helpful to have your feedback.

Thanks very much

Ralph
Brightlan.net
___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Guidance for mounting gear on an AM tower

[Justin Wilson]

It will most likely have to be.

-Original Message-
From: Greg Ihnen 
Reply-To: WISPA General List 
Date: Thursday, August 30, 2012 9:31 AM
To: WISPA General List 
Subject: Re: [WISPA] Guidance for mounting gear on an AM tower

>That was my first thought too, the possible pattern change. The antenna
>might have to be resurveyed after the install.
>
>Greg
>
>On Aug 30, 2012, at 9:27 AM, lakel...@gbcx.net  wrote:
>
>> The station engineer should be the lead information contact. If he is
>>clueless most AM stations have engineering firms on retainer.
>> 
>> Adding equipment to certain stations can change the antenna radiation
>>pattern. Obviously the FCC doesn't lie this.  ;-)
>> 
>> -B-
>> 
>> - Reply message -
>> From: "Brian Gray" 
>> To: 
>> Subject: [WISPA] Guidance for mounting gear on an AM tower
>> Date: Wed, Aug 29, 2012 8:43 pm
>> 
>> 
>> Besides staying away from an AM tower, does anyone have any guidance as
>>far as mounting equipment, specifically POE equipment on one without
>>problems for us or the AM tower?
>> 
>> How do I keep AM RF out of my POE cables and my radios / antennas?
>> 
>> How do I ground my gear?
>> 
>> My initial thoughts are:
>> 
>> Install equipment enclosure at base of tower, attached to tower.
>> Run 1" metallic liquid tight (MLT) up tower to aluminum enclosure at
>>200',
>> continue run from enclosure with 1" MLT up to 300' to additional
>>aluminum enclosure
>> run 2 3/4" MLT from 200' enclosure to 2 backhaul radios (probably UBNT
>>NB25 to start with)
>> run 3 3/4" MLT from 300' enclosure to 3 sector antennas (probably UBNT
>>Rocket M2)
>> drill small weep holes in 3/4" runs as they will not be weather tight
>>to radios
>> run shielded cat 5 inside metallic liquid tight.
>> Put 2-3 ferrite cores on the ends of all of the cables.
>> install poe surge arrestors on both ends of cables, just before radio
>>and just before router.
>> wrap rf choke into both ends of a/c power cable running from enclosure
>>to circuit panel
>> No clue on grounding this thing.
>> 
>> Thank you in advance!
>> 
>> 
>> 
>> Brian Gray
>>  
>> Joink LLC
>> Network Manager
>> 812-231-7087 direct
>> 812-870-3332 mobile
>> 
>> Joink Customer Support 1-888-31-JOINK
>> 
>> ___
>> Wireless mailing list
>> Wireless@wispa.org
>> http://lists.wispa.org/mailman/listinfo/wireless
>
>___
>Wireless mailing list
>Wireless@wispa.org
>http://lists.wispa.org/mailman/listinfo/wireless
>


___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless