Re: [wsjt-devel] WSJT-X not recognising multiple Virtual Audio Cables

[Fred Hollendorfer via wsjt-devel]


Curt..
 Tnx fer ur quick note. Always fun to here from another ham who share the same 
passions I soloed a c-150 in 1961 and got my private in ‘64 in HS. Got my 
Airframe license in ‘66 from Teterboro School of Aeronautics and wound up in 
the AF b4 I could finish my engine license. Retired from America West as an 
Airbus Capt in 2006. I’ve had a chance to fly a Cub several times and enjoyed 
it very much. Leadville was always a treat! I had the RV up there several times 
for Bfast with another RVer but alway had to leave by 10A b4 the the DA got too 
high. 
I run WSJT-X along with gridtracker , an IC 7610 and a DX Commander ABV at 
home. When I do POTA  I use an FT 891 into a half wave vertical on a drive on 
mount with a Spider pole. Works pretty well as I can set the whole station up 
in the SantaFe as the rear passenger seat as the op position.  Some parks I 
have to activate w/o internet so I have to use a GPS dongal for time sync using 
Meinberg. 
The RV was fun to build. I just wish it didn’t take 12 1/2 years to build as I 
had to commute to PHX to work.  I’m not familiar with the VAC software but I’ll 
look it up.
Hope this finds you and your family well and safe. Happy holidays and hope to 
see you down the log… 73 

Fred Hollendorfer, W0SP
Wheat Ridge, CO

> On Nov 1, 2021, at 07:50, Bill Somerville via wsjt-devel 
>  wrote:
> On 01/11/2021 12:22, Dave Fitches via wsjt-devel wrote:
>> I recently got another RTL-SDR to hook up to my system. (Win 10)
>> 
>> I was planning to run one using WSJT-X running FT8, the other another 
>> running WSPR
>> 
>> However... it seems that WSJT-X will only recognise ONE Virtual Audio Cable 
>> (VAC)...
>> 
>> I recently set up two additional VAC's (for a total of three) and they work 
>> perfectly - unless I'm using WSXT-X which will only recognise ONE on the 
>> Soundcard Input feed, though it DOES show all THREE VAC's on the OUTBOUND 
>> sound card selection...
>> 
>> Similarly (and no surprise because it's using the same code) JS8Call has the 
>> same issues.
>> 
>> I'm using the VAC software from V.Burel / JS-Loezic - 
>> https://vb-audio.com/Cable/
>> 
>> -- 
>> 
>> 
>>   = Dave Fitches =
> 
> Hi Dave,
> 
> no one else has reported a similar issue. I have VAC installed (not VB-Cable 
> but similar) with 8 devices and that all show up in both WSJT-X audio input 
> and out devices as expected. do other applications that use audio devices via 
> the MME audio sub-subsystem like Audacity show them?
> 
> 
> 73
> Bill
> G4WJS.
> 
> 
> 
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] WSJT-X 2.5.2 GA Release

[Conrad PA5Y via wsjt-devel]

No problems with download or install on my 64bit Win 10 Pro for Workstations.  
This has been the case for all recent releases.

Regards

Conrad PA5Y

From: Dave Slotter, W3DJS via wsjt-devel 
Sent: 04 November 2021 19:25
To: WSJT software development 
Cc: Dave Slotter, W3DJS 
Subject: Re: [wsjt-devel] WSJT-X 2.5.2 GA Release

Thank you WSJT-X development team. :-)

I successfully downloaded the sources for 2.5.2 and built on Ubuntu 20.04 and 
Raspberry Pi OS 10 "buster". Smoke test on both platforms successful.

73,

--
Dave Slotter, W3DJS


On Thu, Nov 4, 2021 at 2:09 PM Joe Taylor via wsjt-devel 
mailto:wsjt-devel@lists.sourceforge.net>> 
wrote:
We are pleased to announce the General Availability (GA) release of
WSJT-X version 2.5.2.  This is mostly a bug-fix release.  A full list of
changes can be found in the Release Notes:
https://physics.princeton.edu//pulsar/k1jt/Release_Notes.txt

IMPORTANT: If you expect to use the JT65 or Q65 modes to make
weak-signal QSOs that involve a nonstandard callsign, be sure to upgrade
to WSJT-X 2.5.2!

Links to WSJT-X 2.5.2 installation packages for Windows, Linux, and
Macintosh are available here:
http://physics.princeton.edu/pulsar/k1jt/wsjtx.html

You can also download the packages from our SourceForge site:
https://sourceforge.net/projects/wsjt/files/
It may take a short time for the SourceForge site to be updated.

WSJT-X is licensed under the terms of Version 3 of the GNU General
Public License (GPL).  Development of this software is a cooperative
project to which many amateur radio operators have contributed.  If you
use our code, please have the courtesy to let us know about it.  If you
find bugs or make improvements to the code, please report them to us in
a timely fashion.

The authors and Copyright holders of WSJT-X request that derivative
works should not publish programs based on features in WSJT-X before
those features are made available in a General Availability (GA) release
of WSJT-X.  We will cease making public Release Candidate (RC)
pre-releases for testing and user early access purposes if this request
is ignored.

Bugs should be reported by following instructions found here in the User
Guide:

https://www.physics.princeton.edu//pulsar/K1JT/wsjtx-doc/wsjtx-main-2.5.2.html#_bug_reports

We hope you will enjoy using WSJT-X 2.5.2.

  -- 73 from Joe, K1JT; Bill, G4WJS; Steve, K9AN; and Nico, IV3NWV


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Yaesu rig split problems

[Marco Calistri via wsjt-devel]

Il 04/11/21 19:49, Black Michael ha scritto:

And what rig is this?

VFOA moves just like VFOB does in split so shouldn't make any 
difference in F/H mode.


Mike W9MDB




On Thursday, November 4, 2021, 05:26:18 PM CDT, Marco Calistri via 
wsjt-devel  wrote:



Hello Mike,

My answers inline.

Il 04/11/21 09:35, Black Michael via wsjt-devel ha scritto:
I'm trying to solve rig split operation problems with Yaesu rigs and 
need some Yaesu operator help...


I need any Yaesu owners to state their rig model and whether or not 
"Rig split" works in WSJT-X or if you see flashing on the rig when 
Rig split is turned on.


So 3 questions
#1 Can you make QSOs? *Yes*
#2 Does rig operation look smooth? Should be a little activity as 
freq & mode get set on both VFOs but it I'd like to know if the 
display goes a little nuts when it's happening with Rx/Tx flickering 
or such. *Yes*



Mike W9MDB


*Additional notes: *Split works well here but lately, in order to be 
able to work some of the latest DX Expeditions, I switched this option 
to "FAKE-IT" due the fact that otherwise, when I'm into F/H mode using 
"SPLIT" my VFO moves too much off from the FOX station frequency.


As you probably may remind, I cannot use USB mode here if use hamlib 
net rigctl, just DIG-MODE in this case otherwise the TX audio mutes.





Oh, sorry Mike, I omitted the rig! It is the *YAESU FT-100*.

What I faced here is that when using F/H and split option set to 
*SPLIT*, my RX VFO was moving too much off from the FOX station TX 
frequency so that I couldn't receive his signal anymore.


It took me some failed attempts to discover this fact and when finally I 
switched split option to *FAKE-IT*, the problem has stopped.




---
*73 de Marco, PY1ZRJ (former IK5BCU)*
**___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Yaesu rig split problems

[Black Michael via wsjt-devel]

And what rig is this?
VFOA moves just like VFOB does in split so shouldn't make any difference in F/H 
mode.
Mike W9MDB

 

On Thursday, November 4, 2021, 05:26:18 PM CDT, Marco Calistri via 
wsjt-devel  wrote:  
 
  Hello Mike,
 
 My answers inline.
 
 Il 04/11/21 09:35, Black Michael via wsjt-devel ha scritto:
  
   I'm trying to solve rig split operation problems with Yaesu rigs and need 
some Yaesu operator help... 
  I need any Yaesu owners to state their rig model and whether or not "Rig 
split" works in WSJT-X or if you see flashing on the rig when Rig split is 
turned on.
  
  So 3 questions #1 Can you make QSOs? Yes
  #2 Does rig operation look smooth?  Should be a little activity as freq & 
mode get set on both VFOs but it I'd like to know if the display goes a little 
nuts when it's happening with Rx/Tx flickering or such. Yes
  
  Mike W9MDB 
  
   
 Additional notes: Split works well here but lately, in order to be able to 
work some of the latest DX Expeditions, I switched this option to "FAKE-IT" due 
the fact that otherwise, when I'm into F/H mode using "SPLIT" my VFO moves too 
much off from the FOX station frequency. 
 
 As you probably may remind, I cannot use USB mode here if use hamlib net 
rigctl, just DIG-MODE in this case otherwise the TX audio mutes.
 
 
  ---
 73 de Marco, PY1ZRJ (former IK5BCU)
  ___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
  ___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Yaesu rig split problems

[Marco Calistri via wsjt-devel]

  
Hello Mike,
  
  My answers inline.
  
  Il 04/11/21 09:35, Black Michael via wsjt-devel ha scritto:


  
  

  I'm trying to solve rig
split operation problems with Yaesu rigs and need some Yaesu
operator help...
  
  
  I need any Yaesu owners to
state their rig model and whether or not "Rig split" works
in WSJT-X or if you see flashing on the rig when Rig split
is turned on.
  
  
  
  So 3 questions
  #1 Can you make QSOs? Yes
  
  #2 Does rig operation look
smooth?  Should be a little activity as freq & mode get
set on both VFOs but it I'd like to know if the display goes
a little nuts when it's happening with Rx/Tx flickering or
such. Yes
  
  
  
  Mike W9MDB
  
  
  

  

Additional notes: Split works well here but lately, in order
to be able to work some of the latest DX Expeditions, I switched
this option to "FAKE-IT" due the fact that otherwise, when I'm into
F/H mode using "SPLIT" my VFO moves too much off from the FOX
station frequency. 

As you probably may remind, I cannot use USB mode here if use hamlib
net rigctl, just DIG-MODE in this case otherwise the TX audio mutes.



---
  73 de Marco, PY1ZRJ (former IK5BCU)
  
  
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] Yaesu Rig Split

[Josh Rovero via wsjt-devel]

I use Rig Split with FT-950 via a USB serial adapter.

On the first tune/transmit cycle after starting the software, the "Enable
Tx" button turns off, but manually turning it on keeps it on for subsequent
tune/transmit cycles.

-- 
P.J. "Josh" Rovero http://www.roveroresearch.org
Ham Radio: KK1D
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] WSJT-X 2.5.2 GA Release

[Dan Malcolm via wsjt-devel]

I downloaded the 64 bit version first with MS Edge.  Even after I told Edge 
that it's safe and reported my opinion to MS, Edge refused to allow me to 
download the file.  Chrome however doesn't evoke Win Defender so it downloaded 
fine with Chrome, the new WSJT-X installed and ran correctly.  BTW I use ESET 
for virus protection and Defender is and has been turned off.  Edge paid no 
attention to my wishes.

__
Dan - K4SHQ
CFI/II

-Original Message-
From: Joe Taylor via wsjt-devel  
Sent: Thursday, November 4, 2021 1:03 PM
To: WSJT software development 
Cc: Joe Taylor 
Subject: [wsjt-devel] WSJT-X 2.5.2 GA Release

We are pleased to announce the General Availability (GA) release of WSJT-X 
version 2.5.2.  This is mostly a bug-fix release.  A full list of changes can 
be found in the Release Notes:
https://physics.princeton.edu//pulsar/k1jt/Release_Notes.txt

IMPORTANT: If you expect to use the JT65 or Q65 modes to make weak-signal QSOs 
that involve a nonstandard callsign, be sure to upgrade to WSJT-X 2.5.2!

Links to WSJT-X 2.5.2 installation packages for Windows, Linux, and Macintosh 
are available here:
http://physics.princeton.edu/pulsar/k1jt/wsjtx.html

You can also download the packages from our SourceForge site:
https://sourceforge.net/projects/wsjt/files/
It may take a short time for the SourceForge site to be updated.

WSJT-X is licensed under the terms of Version 3 of the GNU General Public 
License (GPL).  Development of this software is a cooperative project to which 
many amateur radio operators have contributed.  If you use our code, please 
have the courtesy to let us know about it.  If you find bugs or make 
improvements to the code, please report them to us in a timely fashion.

The authors and Copyright holders of WSJT-X request that derivative works 
should not publish programs based on features in WSJT-X before those features 
are made available in a General Availability (GA) release of WSJT-X.  We will 
cease making public Release Candidate (RC) pre-releases for testing and user 
early access purposes if this request is ignored.

Bugs should be reported by following instructions found here in the User
Guide:

https://www.physics.princeton.edu//pulsar/K1JT/wsjtx-doc/wsjtx-main-2.5.2.html#_bug_reports

We hope you will enjoy using WSJT-X 2.5.2.

  -- 73 from Joe, K1JT; Bill, G4WJS; Steve, K9AN; and Nico, IV3NWV


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] WSJT-X 2.5.2 GA Release

[Dave Slotter, W3DJS via wsjt-devel]

Thank you WSJT-X development team. :-)

I successfully downloaded the sources for 2.5.2 and built on Ubuntu 20.04
and Raspberry Pi OS 10 "buster". Smoke test on both platforms successful.

73,

--
Dave Slotter, W3DJS 


On Thu, Nov 4, 2021 at 2:09 PM Joe Taylor via wsjt-devel <
wsjt-devel@lists.sourceforge.net> wrote:

> We are pleased to announce the General Availability (GA) release of
> WSJT-X version 2.5.2.  This is mostly a bug-fix release.  A full list of
> changes can be found in the Release Notes:
> https://physics.princeton.edu//pulsar/k1jt/Release_Notes.txt
>
> IMPORTANT: If you expect to use the JT65 or Q65 modes to make
> weak-signal QSOs that involve a nonstandard callsign, be sure to upgrade
> to WSJT-X 2.5.2!
>
> Links to WSJT-X 2.5.2 installation packages for Windows, Linux, and
> Macintosh are available here:
> http://physics.princeton.edu/pulsar/k1jt/wsjtx.html
>
> You can also download the packages from our SourceForge site:
> https://sourceforge.net/projects/wsjt/files/
> It may take a short time for the SourceForge site to be updated.
>
> WSJT-X is licensed under the terms of Version 3 of the GNU General
> Public License (GPL).  Development of this software is a cooperative
> project to which many amateur radio operators have contributed.  If you
> use our code, please have the courtesy to let us know about it.  If you
> find bugs or make improvements to the code, please report them to us in
> a timely fashion.
>
> The authors and Copyright holders of WSJT-X request that derivative
> works should not publish programs based on features in WSJT-X before
> those features are made available in a General Availability (GA) release
> of WSJT-X.  We will cease making public Release Candidate (RC)
> pre-releases for testing and user early access purposes if this request
> is ignored.
>
> Bugs should be reported by following instructions found here in the User
> Guide:
>
>
> https://www.physics.princeton.edu//pulsar/K1JT/wsjtx-doc/wsjtx-main-2.5.2.html#_bug_reports
>
> We hope you will enjoy using WSJT-X 2.5.2.
>
>   -- 73 from Joe, K1JT; Bill, G4WJS; Steve, K9AN; and Nico, IV3NWV
>
>
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] WSJT-X 2.5.2 GA Release

[Joe Taylor via wsjt-devel]

We are pleased to announce the General Availability (GA) release of 
WSJT-X version 2.5.2.  This is mostly a bug-fix release.  A full list of 
changes can be found in the Release Notes:

https://physics.princeton.edu//pulsar/k1jt/Release_Notes.txt

IMPORTANT: If you expect to use the JT65 or Q65 modes to make 
weak-signal QSOs that involve a nonstandard callsign, be sure to upgrade 
to WSJT-X 2.5.2!


Links to WSJT-X 2.5.2 installation packages for Windows, Linux, and 
Macintosh are available here:

http://physics.princeton.edu/pulsar/k1jt/wsjtx.html

You can also download the packages from our SourceForge site:
https://sourceforge.net/projects/wsjt/files/
It may take a short time for the SourceForge site to be updated.

WSJT-X is licensed under the terms of Version 3 of the GNU General 
Public License (GPL).  Development of this software is a cooperative 
project to which many amateur radio operators have contributed.  If you 
use our code, please have the courtesy to let us know about it.  If you 
find bugs or make improvements to the code, please report them to us in 
a timely fashion.


The authors and Copyright holders of WSJT-X request that derivative 
works should not publish programs based on features in WSJT-X before 
those features are made available in a General Availability (GA) release 
of WSJT-X.  We will cease making public Release Candidate (RC) 
pre-releases for testing and user early access purposes if this request 
is ignored.


Bugs should be reported by following instructions found here in the User 
Guide:


https://www.physics.princeton.edu//pulsar/K1JT/wsjtx-doc/wsjtx-main-2.5.2.html#_bug_reports

We hope you will enjoy using WSJT-X 2.5.2.

 -- 73 from Joe, K1JT; Bill, G4WJS; Steve, K9AN; and Nico, IV3NWV


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Yaesu rig split problems

[david--- via wsjt-devel]

I have a FTDX-5000 with WSJT-X 2.5.1 and use split with no difficulty.  (And 
have had no difficulty running split all the way back to the first version of 
WSJT-X that supported FT8.)

I do not use DATA modes – just plain USB filtering.

 

David, AK2L

 

 

From: Black Michael via wsjt-devel  
Sent: Thursday, November 4, 2021 05:36
To: WSJTX Group ; WSJT Software Development 

Cc: Black Michael 
Subject: [wsjt-devel] Yaesu rig split problems

 

I'm trying to solve rig split operation problems with Yaesu rigs and need some 
Yaesu operator help...

 

I need any Yaesu owners to state their rig model and whether or not "Rig split" 
works in WSJT-X or if you see flashing on the rig when Rig split is turned on.

 

So 3 questions

#1 Can you make QSOs?

#2 Does rig operation look smooth?  Should be a little activity as freq & mode 
get set on both VFOs but it I'd like to know if the display goes a little nuts 
when it's happening with Rx/Tx flickering or such.

 

Mike W9MDB

 

 

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Yaesu rig split problems

[Virginia Greene via wsjt-devel]

Mike,

A number of radios have limited frequency response when used in Data mode 
compared to USB mode.  

My own Elecraft KX3 rolls off starting at about 400 Hz when used in Data mode.  
With the right settings in USB mode, the low end stretches down to closer to 
100 Hz.  I’ve measured this, and could demonstrate it if you need proof.

Perhaps there is a setting in Data mode that gets around this, but I sure 
haven’t found it.  Using Data mode for FT8 would be soo much better 
operationally, but alas…

I bet other radios have this or similar problems.  

Yeah, there are very effective tricks to get around this.  In Fox and Hound 
DXpedition mode, Hounds can work around the problem by offsetting the VFO from 
the nominal Fox bands.  Foxes can set their TX Freq to something higher than 
the default 300 Hz so that they can hear Hounds giving their reports.

There’s workarounds for all the problems.  But, I bet that only a small 
percentage of the WSJT-X users who focus on FT8 and FT4 operation on HF bands 
even are aware of these little details.  

So, that kinda ends up like this:

“The patient says, "Doctor, it hurts when I do this."
The doctor says, "Then don't do that!”

― Henny Youngman

Might not be ideal.

Clarke  K1JX


> On Nov 4, 2021, at 10:59 AM, Black Michael via wsjt-devel 
>  wrote:
> 
> And why USB and not Data mode?  Might help others to know or is there a bug 
> there?
> 
> Mike W9MDB
> 
> 
> 
> 
> On Thursday, November 4, 2021, 09:57:31 AM CDT, da...@beauchesne.net 
>  wrote:
> 
> 
> I have a FTDX-5000 with WSJT-X 2.5.1 and use split with no difficulty.  (And 
> have had no difficulty running split all the way back to the first version of 
> WSJT-X that supported FT8.)
> 
> I do not use DATA modes – just plain USB filtering.
> 
>  
> David, AK2L
> 
>  
>  
> From: Black Michael via wsjt-devel  
> Sent: Thursday, November 4, 2021 05:36
> To: WSJTX Group ; WSJT Software Development 
> 
> Cc: Black Michael 
> Subject: [wsjt-devel] Yaesu rig split problems
> 
>  
> I'm trying to solve rig split operation problems with Yaesu rigs and need 
> some Yaesu operator help...
> 
>  
> I need any Yaesu owners to state their rig model and whether or not "Rig 
> split" works in WSJT-X or if you see flashing on the rig when Rig split is 
> turned on.
> 
>  
> So 3 questions
> 
> #1 Can you make QSOs?
> 
> #2 Does rig operation look smooth?  Should be a little activity as freq & 
> mode get set on both VFOs but it I'd like to know if the display goes a 
> little nuts when it's happening with Rx/Tx flickering or such.
> 
>  
> Mike W9MDB
> 
>  
>  
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Yaesu rig split problems

[Black Michael via wsjt-devel]

And why USB and not Data mode?  Might help others to know or is there a bug 
there?
Mike W9MDB

 

On Thursday, November 4, 2021, 09:57:31 AM CDT, da...@beauchesne.net 
 wrote:  
 
 
I have a FTDX-5000 with WSJT-X 2.5.1 and use split with no difficulty.  (And 
have had no difficulty running split all the way back to the first version of 
WSJT-X that supported FT8.)

I do not use DATA modes – just plain USB filtering.

  

David, AK2L

  

  

From: Black Michael via wsjt-devel  
Sent: Thursday, November 4, 2021 05:36
To: WSJTX Group ; WSJT Software Development 

Cc: Black Michael 
Subject: [wsjt-devel] Yaesu rig split problems

  

I'm trying to solve rig split operation problems with Yaesu rigs and need some 
Yaesu operator help...

  

I need any Yaesu owners to state their rig model and whether or not "Rig split" 
works in WSJT-X or if you see flashing on the rig when Rig split is turned on.

  

So 3 questions

#1 Can you make QSOs?

#2 Does rig operation look smooth?  Should be a little activity as freq & mode 
get set on both VFOs but it I'd like to know if the display goes a little nuts 
when it's happening with Rx/Tx flickering or such.

  

Mike W9MDB

  

  
  ___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Yaesu rig split problems

[Black Michael via wsjt-devel]

And what do you have for the Mode selection?  Seems the problem is when that is 
Mode=USB or Mode=Data/Pkt
Mike W9MDB 

On Thursday, November 4, 2021, 07:59:09 AM CDT, Peter Sichel 
 wrote:  
 
 I have FTdx10 and split operation works as expected locally (rx VFO-A and tx 
VFO-B).

I learned from the developer of RUMLogNG that VFO-B isn’t readily available to 
logging software.The software can only track VFO-A regardless of which VFO is 
controlling the transceiver.
Kind regards,
- Peter, K1AV

On Nov 4, 2021, at 8:35 AM, Black Michael via wsjt-devel 
 wrote:
I'm trying to solve rig split operation problems with Yaesu rigs and need some 
Yaesu operator help...
I need any Yaesu owners to state their rig model and whether or not "Rig split" 
works in WSJT-X or if you see flashing on the rig when Rig split is turned on.
So 3 questions#1 Can you make QSOs?#2 Does rig operation look smooth?  Should 
be a little activity as freq & mode get set on both VFOs but it I'd like to 
know if the display goes a little nuts when it's happening with Rx/Tx 
flickering or such.
Mike W9MDB

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel


  ___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] WSJT-X settings Reporting tab

[Bill Barrett via wsjt-devel]

Hello Laurie-

I finally found the "WSJT-X UDP Multicast on Loopback" on the initial
clicking of the settings tab.
Thought it was somewhere in Managing Settings. Realize now there is a
brief clue in the help file.
Maybe a picture of the whole settings tab with an arrow to the top position
would be more helpful.
I have programmed plenty of UIs, interesting to see how users trip over the
simplest of situations.
Obviously enjoying the panel options on the Call Signs Window. Terrific
app, could not operate digital without it.

73;

Bill W2PKY



On Wed, Nov 3, 2021 at 11:53 PM Laurie, VK3AMA via wsjt-devel <
wsjt-devel@lists.sourceforge.net> wrote:

>
>
> On 4/11/2021 1:52 pm, Bill Barrett via wsjt-devel wrote:
> > Used TCP/IP connection and 224.0.0.1 and ethernet outgoing interface.
> > That works!
> >
> > Bill W2PKY
>
> That tells me you didn't have the "WSJT-X UDP Multicast on Loopback"
> menu set in JTAlert which is needed if you have the WSJT-X UDP Server
> interface set to the loopback device. If WSJT-X is bound to the loopback
> device for the UDP Server settings then you need to tell JTAlert to
> explicitly to look for the UDP traffic on the loopback interface.
>
> de Laurie VK3AMA
>
>
>
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Yaesu rig split problems

[DG2YCB, Uwe via wsjt-devel]

I can offer my FT-991 for the tests. (I have the old model, NOT FT-991A.)

 

73 de Uwe, DG2YCB 

 

Von: Black Michael via wsjt-devel [mailto:wsjt-devel@lists.sourceforge.net] 
Gesendet: Donnerstag, 4. November 2021 13:36
An: WSJTX Group; WSJT Software Development
Cc: Black Michael
Betreff: [wsjt-devel] Yaesu rig split problems

 

I'm trying to solve rig split operation problems with Yaesu rigs and need some 
Yaesu operator help...

 

I need any Yaesu owners to state their rig model and whether or not "Rig split" 
works in WSJT-X or if you see flashing on the rig when Rig split is turned on.

 

So 3 questions

#1 Can you make QSOs?

#2 Does rig operation look smooth?  Should be a little activity as freq & mode 
get set on both VFOs but it I'd like to know if the display goes a little nuts 
when it's happening with Rx/Tx flickering or such.

 

Mike W9MDB

 

 

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] Yaesu rig split problems

[Black Michael via wsjt-devel]

I'm trying to solve rig split operation problems with Yaesu rigs and need some 
Yaesu operator help...
I need any Yaesu owners to state their rig model and whether or not "Rig split" 
works in WSJT-X or if you see flashing on the rig when Rig split is turned on.
So 3 questions#1 Can you make QSOs?#2 Does rig operation look smooth?  Should 
be a little activity as freq & mode get set on both VFOs but it I'd like to 
know if the display goes a little nuts when it's happening with Rx/Tx 
flickering or such.
Mike W9MDB

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel