On Sat, Mar 8, 2014 at 8:29 PM, erik quanstrom quans...@quanstro.net wrote:
Thanks, I downloaded the 9pi file (~2MB, MD5 -
4e4e18980d8ac91b0e8ed5aa820dc429) from contrib/bakul directory.
I could boot the R-Pi with this kernel and get the kb and mouse
working fine! Thanks a lot to everyone!
Thank you Erik. Today I got hold of an HDMI to DVI cable and hooked
it to the Pi and my DVI monitor sitting somewhere near my router.
After booting up, just doing a 'ip/ipconfig' and 'ndb/dns -r' got me
into the network. :)
I plan to use this setup as my main computing setup for as long as
On Tue, Mar 4, 2014 at 11:48 PM, Bakul Shah ba...@bitblocks.com wrote:
On Tue, 04 Mar 2014 11:26:31 EST erik quanstrom quans...@quanstro.net wrote:
first, apply the patch to the source, then build all of usb
9fs sources
cd /sys/src/cmd/usb/lib
cp
Thanks, I downloaded the 9pi file (~2MB, MD5 -
4e4e18980d8ac91b0e8ed5aa820dc429) from contrib/bakul directory.
I could boot the R-Pi with this kernel and get the kb and mouse
working fine! Thanks a lot to everyone! One of the mice I had (a very
cheap, small mouse) didn't work though.
Sorry, my suggested correction is still wrong. b[0] is the length of
the whole descriptor not the length of the string. So I suggest this
(I tested it on exactly one device) -
static char*
mkstr(uchar *b, int n)
{
Rune r;
char *us;
char *s;
char *e;
if(n
Apologies for last message, it was meant to be directed to quans...@quanstro.net
as part of a conversation. Please ignore.
On Fri, Feb 28, 2014 at 9:54 PM, Bakul Shah ba...@bitblocks.com wrote:
On Fri, 28 Feb 2014 09:45:42 EST Anthony Sorace a...@9srv.net wrote:
Based on my own experience with USB weirdness with the Pi, I still suspec
power issues. How are you powering the Pi itself? Using a 1 amp supply
yielded
Okay, I tried a powered hub. Now, it boots with both keyboard and
mouse (previously it used to hang when I connect both keyboard and
mouse). But still the keyboard and mouse are not recognized. Once I
saw a warning message that the descriptor length is short. But when
I rebooted, I didn't see
On Tue, Mar 4, 2014 at 7:57 PM, erik quanstrom quans...@quanstro.net wrote:
Okay, I tried a powered hub. Now, it boots with both keyboard and
mouse (previously it used to hang when I connect both keyboard and
mouse). But still the keyboard and mouse are not recognized. Once I
saw a warning
On Tue Mar 4 10:56:33 EST 2014, vu3...@gmail.com wrote:
On Tue, Mar 4, 2014 at 7:57 PM, erik quanstrom quans...@quanstro.net wrote:
Okay, I tried a powered hub. Now, it boots with both keyboard and
mouse (previously it used to hang when I connect both keyboard and
mouse). But still the
On Tue, 04 Mar 2014 11:26:31 EST erik quanstrom quans...@quanstro.net wrote:
first, apply the patch to the source, then build all of usb
9fs sources
cd /sys/src/cmd/usb/lib
cp /n/sources/patch/usbshortdesc/dev.c dev.c
cd ..
mk install
then, build a new
IIRC Ramakrishnan doesn't have a working 9pi system.
I put 9pi with this patch in contrib/bakul on sources. It was
cross-built on a 386 VM with a pull done this morning + the
above patch. I had to rebuild the host 5c due to rune related
errors so I am not 100% certain this will work (I
after looking over the spec, i didn't see this question addressed. do you?
it's a byte, so in theory there could be 255 configurations.
Section 9.6 on device descriptors - this applies to every device,
not just hubs. (Although the iMac keyboard does in fact contain
a hub.)
Yes of course
old iMac usb keyboard c. 2001
Apple 'Pro' keyboard, c. 2004
these two work for me using the modifications here:
http://9fans.net/archive/2014/02/202
setting the langid is critical for some keyboards.
Looking at the patch in that 9fans.net posting, I am puzzled.
/n/sources/plan9/sys/src/cmd/usb/lib/dev.c:228,233 - dev.c:233,245
memset(buf, 0, Ddevlen);
if((nr=usbcmd(d, type, Rgetdesc, Ddev8|0, 0, buf, nr)) 0)
return -1;
+ if(nr == 17){
+ print(%s: langid %.4ux\n, argv0, buf[3]8|buf[2]);
+
PFU HHKB2Lite
old iMac usb keyboard c. 2001
Apple 'Pro' keyboard, c. 2004
these two work for me using the modifications here:
http://9fans.net/archive/2014/02/202
setting the langid is critical for some keyboards.
I've just tried Erik's usbd with a 2003 iMac keyboard:
usbotg: ep6.0
I've just tried Erik's usbd with a 2003 iMac keyboard:
usbotg: ep6.0 error intr 0402
usbotg: ep6.0 error intr 0402
usbotg: ep6.0 error intr 0402
usbotg: ep6.0 error intr 0402
usbotg: ep6.0 error intr 0402
usbotg: ep6.0 error intr 0402
usbotg: ep6.0 error intr
also, according to the linux kernel, we should not be looking for
configurations on anything that's not a hub.
Personally I wouldn't look to the linux kernel as guidance for
correct behaviour. Especially when there's a published specification
available.
Every usb device has at least one
I'm not sure if this is helpful at this, or indeed any, stage in the
conversation, but for me one of the great joys of using Richard's port has
been that it just works on real hardware without having to mess about, or
having to worry about esoterica about USB and chums. At least they're
esoterica
Personally I wouldn't look to the linux kernel as guidance for
correct behaviour. Especially when there's a published specification
available.
after looking over the spec, i didn't see this question addressed. do you?
it's a byte, so in theory there could be 255 configurations. lacking
Keyboards that didn't work:
...
IBM Type M with two different generic PS/2 to USB adapter (also from Fry's)
I'm still using my faithful 21-year-old Model M, with a blue cube PS/2
adapter.
Works perfectly.
Keyboards that didn't work:
PFU HHKB2Lite
old iMac usb keyboard c. 2001
Apple 'Pro' keyboard, c. 2004
these two work for me using the modifications here:
http://9fans.net/archive/2014/02/202
setting the langid is critical for some keyboards.
- erik
Keyboards that didn't work:
...
IBM Type M with two different generic PS/2 to USB adapter (also from Fry's)
I'm still using my faithful 21-year-old Model M, with a blue cube PS/2
adapter.
Works perfectly.
I admit both of my PS/2 converters were suspiciously inexpensive, and
I've had problems
work surface in the house, as terminals for a couple of Supermicro
X7SPA-H based cpu servers. I expect the one in the kitchen to require
a series of replacement keyboards.)
http://www.ruggedtech.com/EKFT-108%20key%20washable%20full%20travel%20keyboard.html
(just one of many you can find.)
-
On Thu Feb 27 23:32:49 EST 2014, hcaulfiel...@gmail.com wrote:
This probably won't help, but what happened when I installed Plan 9 onto
my Raspberry Pi, is the mouse worked but not the keyboard. So I ended up
going to store and buying the cheapest keyboard that I could find. I
plugged in the
Okay, I tried another keyboard/mouse (Logitech Classic New Touch
keyboard) and a Logitech mouse (Logitech RX300) and they didn't work.
When I connect keyboard alone, the booting proceeded and I got the
acme screen. But the keyboard didn't work. When I connect keyboard and
mouse, booting is stuck
When I connect keyboard and
mouse, booting is stuck at the same place as yesterday: etherusb
smsc: b827ebf340cd.
Try adding 'kbargs=-d' to your cmdline.txt and see if anything is revealed.
On Fri, Feb 28, 2014 at 4:58 PM, Richard Miller 9f...@hamnavoe.com wrote:
When I connect keyboard and
mouse, booting is stuck at the same place as yesterday: etherusb
smsc: b827ebf340cd.
Try adding 'kbargs=-d' to your cmdline.txt and see if anything is revealed.
I added the above expression
When mouse+keyboard is connected, it shows this:
...
#u/usb/ep1.0: dwcotg: port 0x0 irq 9
#l0: usb: 100Mbps port 0x0 irq -1: 0..00
496M memory: 101M kernel data, 395M user, 1877M swap
usb/hub... usb/ether...
etherusb smsc: ...
usb/kb...
and it hangs.
When I connect only
On Feb 27, 2014, at 12:31, Ramakrishnan Muthukrishnan vu3...@gmail.com wrote:
Always use a powered hub with the Pi – it can't supply bugger all for power
out its USB ports.
Thank you Lyndon, Steve and Erik. I will try a powered hub tomorrow
and also get another keyboard/mouse.
Based on my
On Fri, Feb 28, 2014 at 8:05 PM, Bakul Shah ba...@bitblocks.com wrote:
When mouse+keyboard is connected, it shows this:
...
#u/usb/ep1.0: dwcotg: port 0x0 irq 9
#l0: usb: 100Mbps port 0x0 irq -1: 0..00
496M memory: 101M kernel data, 395M user, 1877M swap
usb/hub... usb/ether...
On Fri, Feb 28, 2014 at 8:15 PM, Anthony Sorace a...@9srv.net wrote:
On Feb 27, 2014, at 12:31, Ramakrishnan Muthukrishnan vu3...@gmail.com
wrote:
Always use a powered hub with the Pi – it can't supply bugger all for power
out its USB ports.
Thank you Lyndon, Steve and Erik. I will try a
On Fri, 28 Feb 2014 09:45:42 EST Anthony Sorace a...@9srv.net wrote:
Based on my own experience with USB weirdness with the Pi, I still suspec
power issues. How are you powering the Pi itself? Using a 1 amp supply yielded
problems, regardless of the sort of hub I had, which all went away when
Mouses that work for me:
Kensington Mouse-in-a-Box Optical 72123 (NOT the newer 72123CAA version)
Kensington Expert Mouse K64325 (actually a trackball, and rather expensive)
HP M-UY 101, 361781-007 (very hard to find)
I tried several USB keyboards, with and without a powered USB hub, for 9Pi
On Wed, Feb 26, 2014 at 10:49 PM, Richard Miller 9f...@hamnavoe.com wrote:
But my USB mouse won't get recognized by Plan9. I tried two different
USB mouse and both of them didn't talk to plan9. Is there a way I can
see any logs in the kernel (like the /var/log/kern.log in the linux
kernel) to
On Thu, Feb 27, 2014 at 9:57 PM, Ramakrishnan Muthukrishnan
vu3...@gmail.com wrote:
On Wed, Feb 26, 2014 at 10:49 PM, Richard Miller 9f...@hamnavoe.com wrote:
But my USB mouse won't get recognized by Plan9. I tried two different
USB mouse and both of them didn't talk to plan9. Is there a way I
On Thu, Feb 27, 2014 at 10:05 PM, Ramakrishnan Muthukrishnan
vu3...@gmail.com wrote:
On Thu, Feb 27, 2014 at 9:57 PM, Ramakrishnan Muthukrishnan
vu3...@gmail.com wrote:
On Wed, Feb 26, 2014 at 10:49 PM, Richard Miller 9f...@hamnavoe.com wrote:
But my USB mouse won't get recognized by Plan9. I
I tried a USB hub (not a powered one though) and it hangs after
printing the following lines:
i'd recommend using a powered hub.
- erik
FWIW I have a Dell keyboard (kb1421), and an IBM/Lenovo mouse (m-u0013-o) and
they work fine on my Pi.
You are connecting them directly to the PI aren't you? - if you want to use a
USB hub
it must be a powered one it seems - the Pi can supply very little current on its
USB interface.
-Steve
On Feb 27, 2014, at 9:05 AM, Ramakrishnan Muthukrishnan vu3...@gmail.com
wrote:
I tried a USB hub (not a powered one though) and it hangs after
printing the following lines:
Always use a powered hub with the Pi – it can't supply bugger all for power out
its USB ports.
signature.asc
On Thu, Feb 27, 2014 at 10:38 PM, Lyndon Nerenberg lyn...@orthanc.ca wrote:
On Feb 27, 2014, at 9:05 AM, Ramakrishnan Muthukrishnan vu3...@gmail.com
wrote:
I tried a USB hub (not a powered one though) and it hangs after
printing the following lines:
Always use a powered hub with the Pi –
On Thu, 27 Feb 2014 23:01:39 +0530 Ramakrishnan Muthukrishnan
vu3...@gmail.com wrote:
On Thu, Feb 27, 2014 at 10:38 PM, Lyndon Nerenberg lyn...@orthanc.ca wrot=
e:
On Feb 27, 2014, at 9:05 AM, Ramakrishnan Muthukrishnan vu3...@gmail.com=
wrote:
I tried a USB hub (not a powered one
This probably won't help, but what happened when I installed Plan 9 onto
my Raspberry Pi, is the mouse worked but not the keyboard. So I ended up
going to store and buying the cheapest keyboard that I could find. I
plugged in the keyboard and it worked. It wasn't a power issue because
Linux worked
Hello Plan9 hackers,
I booted up the new raspberry pi I got last week with an SD Card with
the 9pi image from the Labs website. I realised that my monitor
doesn't have an HDMI input and only DVI, VGA and DisplayPort, so
instead, I connected the little board to my 32 TV and the glenda
appeared
But my USB mouse won't get recognized by Plan9. I tried two different
USB mouse and both of them didn't talk to plan9. Is there a way I can
see any logs in the kernel (like the /var/log/kern.log in the linux
kernel) to see what exactly happened?
Assuming your keyboard is recognised so you can
On Wed, Feb 26, 2014 at 9:57 PM, Ramakrishnan Muthukrishnan
vu3...@gmail.com wrote:
Hello Plan9 hackers,
I booted up the new raspberry pi I got last week with an SD Card with
the 9pi image from the Labs website. I realised that my monitor
doesn't have an HDMI input and only DVI, VGA and
46 matches
Mail list logo
